Pasar al contenido principal

CONTRIBUCION DEL ALMACENAMIENTO DE ENERGIA TERMICA A LA EFICIENCIA ENERGETICA EN EDIFICIOS Y EN APLICACIONES INDUSTRIALES

ENE2008-06687-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE LLEIDA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Behaviour of green facades in Mediterranean Continental climate

  • Pérez Luque, Gabriel
  • Rincón, Lídia
  • González, J. M.
  • Cabeza, Luisa F.
In order to obtain data on the behaviour of green facades in buildings as a passive system for energy savings in dry Mediterranean Continental climate a long-term work has been performed. This paper presents the first results of two actions developed during 2009. First, the growth of four different climbing plants as well as their ability to provide shadow was studied. Second, monitoring for a year of a real green facade was carried out. The results confirmed the great capacity of green facades to produce shade, reducing the heat on the facade wall of the building. It was also verified that a microclimate between the wall of the building and the green curtain are created, characterized by slightly lower temperatures and higher relative humidity. This means that the green screen acts as a wind barrier and confirms the evapotranspiration effect of the plants. On the other hand, these results did not allow withdrawing conclusions about the insulation effect of green facades., The work was partially funded by the Spanish government (Project ENE2008-06687-C02-01/CON) and the European Union (COST Action COST TU0802), in collaboration with Fundación Mapfre, the Cityhall of Golmés, and the Cityhall of Puigverd de Lleida. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Effect of microencapsulated phase change material in sandwich panels

  • Castellón, Cecilia
  • Medrano Martorell, Marc
  • Roca Enrich, Joan
  • Cabeza, Luisa F.
  • Navarro, Maria E.
  • Fernández Renna, Ana Inés
  • Lázaro, Ana
  • Zalba, Belén
Sandwich panels are a good option as building materials, as they offer excellent characteristics in a modular system. The goal of this study was to demonstrate the feasibility of using the microencapsulated PCM (Micronal BASF) in sandwich panels to increase their thermal inertia and to reduce the energy demand of the final buildings. In this paper, to manufacture the sandwich panel with microencapsulated PCM three different methods were tested. In case 1, the PCM was added mixing the microencapsulated PCM with one of the components of the polyurethane. In the other two cases, the PCM was added either a step before (case 2) or a step after (case 3) to the addition of the polyurethane to the metal sheets. The results show that in case 1 the effect of PCM was overlapped by a possible increase in thermal conductivity, but an increase of thermal inertia was found in case 3. In case 2, different results were obtained due to the poor distribution of the PCM. Some samples showed the effect of the PCM (higher thermal inertia), and other samples results were similar to the conventional sandwich panel. In both cases (2 and 3), it is required to industrialize the process to improve the results., The work was partially funded by the Spanish government (project ENE2008-06687-C02-01/CON) and the European Union (COST Action COST TU0802), in collaboration with the companies Europerfil and PLASFI. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Improving thermal performance of freezers using phase change materials, Amélioration de la performance thermique des congélateurs à l’aide de matériaux à changement de phase

  • Oró Prim, Eduard
  • Miró, Laia
  • Farid, Mohammed M.
  • Cabeza, Luisa F.
Food transport and storage at low temperatures is a matter worldwide due to changes of the dietary habits and the increasing of the population. The issue of improving food storage applies at different applications such as commercial freezers or refrigerated trucks. The aim of this work is to improve the thermal performance of commercial freezers using phase change materials (PCMs) under door openings and electrical power failure. A commercial PCM was selected (Climsel-18) with a melting temperature of -18 ºC, which is contained in 10 mm thick stainless steel panels placed at different locations in the freezer. During 3 h of electrical power failure, the use of PCM maintained the freezer temperature 4-6 ºC lower and that of the frozen products remains at acceptable levels for much longer time. With frequent door openings the benefit of the PCM is evident when the temperature of the cabinet is near the melting temperature of the PCM., The work was partially funded by the Spanish government (ENE2008-06687-C02-01/CON) and the European Union (COST Action COST TU0802 and project EFFIBUILDINGS – FP7-PEOPLE-2009-IIF-/-253914)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Review on phase change materials (PCMs) for cold thermal energy storage applications

  • Oró Prim, Eduard
  • Gracia Cuesta, Alvaro de
  • Castell, Albert
  • Farid, Mohammed M.
  • Cabeza, Luisa F.
Thermal energy storage (TES) is a technology with a high potential for different thermal applications. It is well known that TES could be the most appropriate way and method to correct the gap between the demand and supply of energy and therefore it has become a very attractive technology. In this paper, a review of TES for cold storage applications using solid–liquid phase change materials has been carried out. The scope of the work was focussed on different aspects: phase change materials (PCMs), encapsulation, heat transfer enhancement, and the effect of storage on food quality. Materials used by researchers as potential PCM at low temperatures (less than 20 C) are summarized and some of their thermophysical properties are reported. Over 88 materials that can be used as PCM, and about 40 commercially available PCM have been listed. Problems in long term stability of the materials, such as corrosion, phase segregation, stability under extended cycling or subcooling are discussed. Heat transfer is considered both from theoretical and experimental point of view and the different methods of PCM encapsulation are reviewed. Many applications of PCM at low temperature can be found, such as, ice storage, conservation and transport of temperature sensitive materials and in air conditioning, cold stores, and refrigerated trucks., The work partially funded by the Spanish Government (ENE2008-06687-C02-01/CON and ENE2011-22722) and the European Union (COST Action COST TU0802 and project EFFIBUILDINGS – FP7-PEOPLE-2009-IIF-/-253914). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534). Eduard Oró would like to thank the University of Lleida for his research fellowship.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Selection of materials with potential in sensible thermal energy storage

  • Fernández Renna, Ana Inés
  • Martínez, Mònica
  • Segarra Rubí, Mercè
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Thermal energy storage is a technology under investigation since the early 1970s. Since then, numerous new applications have been found and muchwork has been done to bring this technology to the market. Nevertheless, the materials used either for latent or for sensible storage were mostly investigated 30 years ago, and the research has lead to improvement in their performance under different conditions of applications. In those years a significant number of new materials were developed in many fields other than storage and energy, but a great effort to characterize and classify these materials was done. Taking into account the fact that thousands of materials are known and a large number of new materials are developed every year, the authors use the methodology for materials selection developed by Prof. Ash by to give an overview of other materials suitable to be used in thermal energy storage. Sensible heat storage at temperatures between 150 and 200 1C is defined as a case study and two different scenarios were considered: long term sensible heat storage and short term sensible heat storage., This work was partially funded by the Spanish Government (Project ENE2008-06687-C02-01/CON) and the European Union (COST ActionCOSTTU0802.) The authors would like to thank the Catalan Government for the quality accreditation given to the GREA research group (2009 SGR 534).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Selection and characterization of recycled materials for sensible thermal energy storage

  • Navarro, Maria E.
  • Martínez, Mònica
  • Gil, Antoni
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Olives, R.
  • Py, Xavier
Alternative low cost materials are evaluated through the valorization of by-products derived from mining and metallurgical industry for solid sensible heat based energy storage systems. They were used either as received or formulated as aggregates in mortars, and their thermal and mechanical properties were characterized. A selection methodology was applied in order to compare them with available materials found in the literature for applications as (STES) materials, and with materials from Cambridge Educational Software (CES) Selector database. It was demonstrated that these recycled materials have a high potential for these thermal energy storage applications., This work was partially funded by the Spanish Government (Project ENE2008-06687-C02-01/CON and ENE2011-22722) and the European Union (COST Action COST TU0802). The authors at DIOPMA and GREA-UdL would like to thank the Catalan Government for the quality accreditation given to their research group, 2009 SGR 645 and 2009 SGR534 respectively. Antoni Gil would like to thank the Col·legi d'Enginyers Industrials de Catalunya for his research appointment and the Departament d'Universitats, Recerca i Societat de la Informació of Generalitat de Catalunya for the AGAUR research stage scholarship (BE-DGR 2010).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Influence of the heat transfer fluid in a CSP plant molten salts charging process

  • Peiró Bell-lloch, Gerard
  • Gasia, Jaume
  • Miró, Laia
  • Prieto, Cristina
  • Cabeza, Luisa F.
The selection of a proper heat transfer fluid (HTF) is a key factor to increase the efficiency of concentrated solar power plants and therefore, to reduce their internal associated CAPEX (capital expenditures of developing and constructing a plant, excluding any grid-connection charges) and OPEX (operating expenditures from the first year of a project's operation). This paper presents a comparative study of two commercial HTF which are widely used in different industries and CSP plants: thermal oil Therminol VP-1 and silicone fluid Syltherm 800. First, the authors theoretically studied the properties of both HTF based on the data given by the manufactures. Afterwards, the authors experimentally perform the comparison in a two-tank molten salt thermal energy storage pilot plant built at the University of Lleida (Spain). The study is focused on the plate heat exchanger of the facility during several charging processes with a counter flow arrangement. Results from both studies showed that, for the same working conditions, Therminol VP-1 is the best candidate for the above-mentioned purposes due to its higher heat transfer, lower thermal losses and lower power consumption associated to the HTF pump. However, it presents problems a low crystallization point, which should also be considered., The research leading to these results has received funding from Spanish goverment (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-22722, ULLE10-4E-1305 and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). This project has also received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement NºPIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B1 00092). The authors would like to thank Dr. Eduard Oró from Catalonia Institute for Energy Research (Spain) and Dr. Antoni Gil from Massachusetts Institute of Technology (USA) for their help during the initial stages of the experimentation.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: Lessons learnt and recommendations for its design, start-up and operation

  • Peiró Bell-lloch, Gerard
  • Prieto, Cristina
  • Gasia, Jaume
  • Jové, Aleix
  • Miró, Laia
  • Cabeza, Luisa F.
Renewable energies are main players to ensure the long-term energy supply. Solar power plants with thermal energy storage (TES) are one of the available renewable technologies which have more potential. Nowadays, there are still several aspects in the design and operation of these power plants which need to be improved, such as the correct operation of some specific instrumentation, the compatibility between TES materials and storage tanks materials, and operational process strategies. This paper presents the acquired experience during the design, start-up, and operation of a kWh scale pilot experimental facility built at the University of Lleida (Spain) together with Abengoa Research (Spain) in 2008. The versatility of this facility has allowed simulating real working conditions and therefore testing different TES systems, TES materials, solar power plant components, and operational strategies focused on TES for temperatures up to 400 °C. In the present paper, the authors show the lessons learnt at pilot and present the main problems and limitations encountered, and give advices of this experimental set-up to extrapolate the data to real plant, to provide solutions to technical problems and reduce the cost of commercial plants., The authors want to thank specially to Dr. Eduard Oró (today at Institut de Recerca d’Energies de Catalunya, Spain) and Dr. Antoni Gil (today at Massachusetts Institute of Technology, USA) for their help in the design, start-up and operation of the pilot plant facility. The research leading to these results has received funding from Spanish government through CDTI granted projects (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-22722, ULLE10-4E-1305, and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). GREA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement NºPIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B1 00092).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Experimental set-up for testing active and passive systems for energy savings in buildings - Lessons learnt

  • Gracia Cuesta, Alvaro de
  • Navarro Farré, Lidia
  • Coma Arpón, Julià
  • Serrano, Susana
  • Romaní Picas, Joaquim
  • Pérez Luque, Gabriel
  • Cabeza, Luisa F.
This paper describes a building prototype experimental set-up used for testing active and passive systems for energy savings, presenting the used methodology, reviewing the main experimental results and identifying limitations. The test facility is located in Puigverd de Lleida (Spain) and has been experimentally evaluating different materials, technologies and systems which might be integrated in building design to provide energy savings for space heating and cooling since 2002. The research fields of passive technologies covered the effect of using different insulating materials, construction systems based on sustainable materials, addition of phase change materials in building envelopes and green infrastructures such as green roofs and walls. On the other hand, the active systems tested were focused in exploiting different available renewable energy source available, such a solar thermal, free-cooling with night air, or geothermal heat, using thermal energy storage systems to shift the heating and cooling loads., The work partially funded by the Spanish Government (ENE2008-06687-C02-01/CON, ENE2011-28269-C03-02, ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER), and ULLE10-4E-1305). Financiado por el proyectoRTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. The research leading to these results has received funding from the European Union's Seventh Framework Programe (FP7/2007-2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE), from MOPCON Project (EU CRAFT ref. G5ST-CT-2002-50331), from Eccoinnovation Project Rewastee ECO/13/630286 and from European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 657466 (INPATH-TES) and from EEA-Grants under grant IDI-20140914. This work was supported by the “Corporación Tecnológica de Andalucía” by means of the project “MECLIDE-Soluciones estructurales con materiales especiales para la climatización diferida de edificios” with the collaboration of DETEA. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940. Julià Coma would like to thank the Departament d′Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship. Cecilia Castellón, Pablo Arce, Albert Castell, Cristian Solé, Pere Moreno and Lídia Rincón participated in the experimentation in this set-up.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Thermal storage in a MW scale. Molten salt solar thermal pilot facility: Plant description and commissioning experiences

  • Prieto, Cristina
  • Osuna, Rafael
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
In 2008, following its R&D strategy roadmap for Concentrated Solar Power, Abengoa designed, built and tested a unique Molten Salts pilot plant at the representative scale of 8 MWhth, coupled with a trough oil loop. The objectives of this project were based on evaluating the technology at a scale at which the results are sufficiently representative of the real circumstances facing a commercial plant that utilizes this storage technology. To this end, the MS-TES plant was brought into operation on January 19th, 2009, been the first demo plant of indirect double tank storage in operation in the world. Key points such a material corrosion, analysis of possible leakage points, calculation of performance or true efficiency of the storage (including a thorough assessment of thermal losses) and analysis of plant operation are the lines that have been analysed at this plant. Operational aspects such as the mechanical assembling, the pre-heating, the filling up and plant performance were deeply addressed. Key components as the storage tanks, the heat exchanger, the molten salts pumps, the heat-tracing systems or valves and instrumentation were tested. In this first paper, the description and commissioning of the plant is presented together a set of lessons learnt to be applied at the commercial plant scale., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT2008-1005). The work is partially funded by the Spanish government (ENE2008-06687-C02-01, ENE2011-28269-C03-02, ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Experimental analysis of charging and discharging processes, with parallel and counter flow arrangements, in a molten salts high temperature pilot plant scale setup

  • Peiró Bell-lloch, Gerard
  • Gasia, Jaume
  • Miró, Laia
  • Prieto, Cristina
  • Cabeza, Luisa F.
Despite the fact that there are some commercial concentrated solar power plants worldwide, there is currently a lack of experimental reports about the operational characteristics of this type of plants. Therefore, a two-tank molten salts thermal energy storage (TES) pilot plant at the University of Lleida (Spain) was used to analyze charging and discharging processes under real conditions. In this facility, 1000 kg of molten salts are used as TES material and Therminol VP-1 is used as heat transfer fluid (HTF). This facility is equipped with measurement equipment which allows an exhaustive analysis of the processes. In this study, the fact of varying the flow arrangement in the heat exchanger (parallel and counter flow arrangements) and the temperature difference between the molten salts and the HTF have been studied and discussed in terms of temperature profiles, energy and power stored/released from/to both HTF and molten salts, efficiencies and effectiveness. The best working conditions found were counter flow arrangement with a temperature grading of about 65 °C., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-28269-C03-02, ENE2011-22722 and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). This project has also received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2016FI_B 00047).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving thermal performance of freezers using phase change materials, Amélioration de la performance thermique des congélateurs à l’aide de matériaux à changement de phase

  • Oró Prim, Eduard
  • Miró, Laia
  • Farid, Mohammed M.
  • Cabeza, Luisa F.
Food transport and storage at low temperatures is a matter worldwide due to changes of the dietary habits and the increasing of the population. The issue of improving food storage applies at different applications such as commercial freezers or refrigerated trucks. The aim of this work is to improve the thermal performance of commercial freezers using phase change materials (PCMs) under door openings and electrical power failure. A commercial PCM was selected (Climsel-18) with a melting temperature of -18 ºC, which is contained in 10 mm thick stainless steel panels placed at different locations in the freezer. During 3 h of electrical power failure, the use of PCM maintained the freezer temperature 4-6 ºC lower and that of the frozen products remains at acceptable levels for much longer time. With frequent door openings the benefit of the PCM is evident when the temperature of the cabinet is near the melting temperature of the PCM., The work was partially funded by the Spanish government (ENE2008-06687-C02-01/CON) and the European Union (COST Action COST TU0802 and project EFFIBUILDINGS – FP7-PEOPLE-2009-IIF-/-253914)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental analysis of charging and discharging processes, with parallel and counter flow arrangements, in a molten salts high temperature pilot plant scale setup

  • Peiró Bell-lloch, Gerard
  • Gasia, Jaume
  • Miró, Laia
  • Prieto, Cristina
  • Cabeza, Luisa F.
Despite the fact that there are some commercial concentrated solar power plants worldwide, there is currently a lack of experimental reports about the operational characteristics of this type of plants. Therefore, a two-tank molten salts thermal energy storage (TES) pilot plant at the University of Lleida (Spain) was used to analyze charging and discharging processes under real conditions. In this facility, 1000 kg of molten salts are used as TES material and Therminol VP-1 is used as heat transfer fluid (HTF). This facility is equipped with measurement equipment which allows an exhaustive analysis of the processes. In this study, the fact of varying the flow arrangement in the heat exchanger (parallel and counter flow arrangements) and the temperature difference between the molten salts and the HTF have been studied and discussed in terms of temperature profiles, energy and power stored/released from/to both HTF and molten salts, efficiencies and effectiveness. The best working conditions found were counter flow arrangement with a temperature grading of about 65 °C., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-28269-C03-02, ENE2011-22722 and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). This project has also received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2016FI_B 00047).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Selection of materials with potential in sensible thermal energy storage

  • Fernández Renna, Ana Inés
  • Martínez, Mònica
  • Segarra Rubí, Mercè
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Thermal energy storage is a technology under investigation since the early 1970s. Since then, numerous new applications have been found and muchwork has been done to bring this technology to the market. Nevertheless, the materials used either for latent or for sensible storage were mostly investigated 30 years ago, and the research has lead to improvement in their performance under different conditions of applications. In those years a significant number of new materials were developed in many fields other than storage and energy, but a great effort to characterize and classify these materials was done. Taking into account the fact that thousands of materials are known and a large number of new materials are developed every year, the authors use the methodology for materials selection developed by Prof. Ash by to give an overview of other materials suitable to be used in thermal energy storage. Sensible heat storage at temperatures between 150 and 200 1C is defined as a case study and two different scenarios were considered: long term sensible heat storage and short term sensible heat storage., This work was partially funded by the Spanish Government (Project ENE2008-06687-C02-01/CON) and the European Union (COST ActionCOSTTU0802.) The authors would like to thank the Catalan Government for the quality accreditation given to the GREA research group (2009 SGR 534).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental set-up for testing active and passive systems for energy savings in buildings - Lessons learnt

  • Gracia Cuesta, Alvaro de
  • Navarro Farré, Lidia
  • Coma Arpón, Julià
  • Serrano, Susana
  • Romaní Picas, Joaquim
  • Pérez Luque, Gabriel
  • Cabeza, Luisa F.
This paper describes a building prototype experimental set-up used for testing active and passive systems for energy savings, presenting the used methodology, reviewing the main experimental results and identifying limitations. The test facility is located in Puigverd de Lleida (Spain) and has been experimentally evaluating different materials, technologies and systems which might be integrated in building design to provide energy savings for space heating and cooling since 2002. The research fields of passive technologies covered the effect of using different insulating materials, construction systems based on sustainable materials, addition of phase change materials in building envelopes and green infrastructures such as green roofs and walls. On the other hand, the active systems tested were focused in exploiting different available renewable energy source available, such a solar thermal, free-cooling with night air, or geothermal heat, using thermal energy storage systems to shift the heating and cooling loads., The work partially funded by the Spanish Government (ENE2008-06687-C02-01/CON, ENE2011-28269-C03-02, ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER), and ULLE10-4E-1305). Financiado por el proyectoRTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. The research leading to these results has received funding from the European Union's Seventh Framework Programe (FP7/2007-2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE), from MOPCON Project (EU CRAFT ref. G5ST-CT-2002-50331), from Eccoinnovation Project Rewastee ECO/13/630286 and from European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 657466 (INPATH-TES) and from EEA-Grants under grant IDI-20140914. This work was supported by the “Corporación Tecnológica de Andalucía” by means of the project “MECLIDE-Soluciones estructurales con materiales especiales para la climatización diferida de edificios” with the collaboration of DETEA. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940. Julià Coma would like to thank the Departament d′Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship. Cecilia Castellón, Pablo Arce, Albert Castell, Cristian Solé, Pere Moreno and Lídia Rincón participated in the experimentation in this set-up.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Review on phase change materials (PCMs) for cold thermal energy storage applications

  • Oró Prim, Eduard
  • Gracia Cuesta, Alvaro de
  • Castell, Albert
  • Farid, Mohammed M.
  • Cabeza, Luisa F.
Thermal energy storage (TES) is a technology with a high potential for different thermal applications. It is well known that TES could be the most appropriate way and method to correct the gap between the demand and supply of energy and therefore it has become a very attractive technology. In this paper, a review of TES for cold storage applications using solid–liquid phase change materials has been carried out. The scope of the work was focussed on different aspects: phase change materials (PCMs), encapsulation, heat transfer enhancement, and the effect of storage on food quality. Materials used by researchers as potential PCM at low temperatures (less than 20 C) are summarized and some of their thermophysical properties are reported. Over 88 materials that can be used as PCM, and about 40 commercially available PCM have been listed. Problems in long term stability of the materials, such as corrosion, phase segregation, stability under extended cycling or subcooling are discussed. Heat transfer is considered both from theoretical and experimental point of view and the different methods of PCM encapsulation are reviewed. Many applications of PCM at low temperature can be found, such as, ice storage, conservation and transport of temperature sensitive materials and in air conditioning, cold stores, and refrigerated trucks., The work partially funded by the Spanish Government (ENE2008-06687-C02-01/CON and ENE2011-22722) and the European Union (COST Action COST TU0802 and project EFFIBUILDINGS – FP7-PEOPLE-2009-IIF-/-253914). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534). Eduard Oró would like to thank the University of Lleida for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal storage in a MW scale. Molten salt solar thermal pilot facility: Plant description and commissioning experiences

  • Prieto, Cristina
  • Osuna, Rafael
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
In 2008, following its R&D strategy roadmap for Concentrated Solar Power, Abengoa designed, built and tested a unique Molten Salts pilot plant at the representative scale of 8 MWhth, coupled with a trough oil loop. The objectives of this project were based on evaluating the technology at a scale at which the results are sufficiently representative of the real circumstances facing a commercial plant that utilizes this storage technology. To this end, the MS-TES plant was brought into operation on January 19th, 2009, been the first demo plant of indirect double tank storage in operation in the world. Key points such a material corrosion, analysis of possible leakage points, calculation of performance or true efficiency of the storage (including a thorough assessment of thermal losses) and analysis of plant operation are the lines that have been analysed at this plant. Operational aspects such as the mechanical assembling, the pre-heating, the filling up and plant performance were deeply addressed. Key components as the storage tanks, the heat exchanger, the molten salts pumps, the heat-tracing systems or valves and instrumentation were tested. In this first paper, the description and commissioning of the plant is presented together a set of lessons learnt to be applied at the commercial plant scale., The research leading to these results has received funding from Spanish government (Fondo tecnológico IDI-20090393, ConSOLida CENIT2008-1005). The work is partially funded by the Spanish government (ENE2008-06687-C02-01, ENE2011-28269-C03-02, ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123) and research group DIOPMA (2014 SGR 1543).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of the heat transfer fluid in a CSP plant molten salts charging process

  • Peiró Bell-lloch, Gerard
  • Gasia, Jaume
  • Miró, Laia
  • Prieto, Cristina
  • Cabeza, Luisa F.
The selection of a proper heat transfer fluid (HTF) is a key factor to increase the efficiency of concentrated solar power plants and therefore, to reduce their internal associated CAPEX (capital expenditures of developing and constructing a plant, excluding any grid-connection charges) and OPEX (operating expenditures from the first year of a project's operation). This paper presents a comparative study of two commercial HTF which are widely used in different industries and CSP plants: thermal oil Therminol VP-1 and silicone fluid Syltherm 800. First, the authors theoretically studied the properties of both HTF based on the data given by the manufactures. Afterwards, the authors experimentally perform the comparison in a two-tank molten salt thermal energy storage pilot plant built at the University of Lleida (Spain). The study is focused on the plate heat exchanger of the facility during several charging processes with a counter flow arrangement. Results from both studies showed that, for the same working conditions, Therminol VP-1 is the best candidate for the above-mentioned purposes due to its higher heat transfer, lower thermal losses and lower power consumption associated to the HTF pump. However, it presents problems a low crystallization point, which should also be considered., The research leading to these results has received funding from Spanish goverment (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-22722, ULLE10-4E-1305 and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). This project has also received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement NºPIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B1 00092). The authors would like to thank Dr. Eduard Oró from Catalonia Institute for Energy Research (Spain) and Dr. Antoni Gil from Massachusetts Institute of Technology (USA) for their help during the initial stages of the experimentation.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: Lessons learnt and recommendations for its design, start-up and operation

  • Peiró Bell-lloch, Gerard
  • Prieto, Cristina
  • Gasia, Jaume
  • Jové, Aleix
  • Miró, Laia
  • Cabeza, Luisa F.
Renewable energies are main players to ensure the long-term energy supply. Solar power plants with thermal energy storage (TES) are one of the available renewable technologies which have more potential. Nowadays, there are still several aspects in the design and operation of these power plants which need to be improved, such as the correct operation of some specific instrumentation, the compatibility between TES materials and storage tanks materials, and operational process strategies. This paper presents the acquired experience during the design, start-up, and operation of a kWh scale pilot experimental facility built at the University of Lleida (Spain) together with Abengoa Research (Spain) in 2008. The versatility of this facility has allowed simulating real working conditions and therefore testing different TES systems, TES materials, solar power plant components, and operational strategies focused on TES for temperatures up to 400 °C. In the present paper, the authors show the lessons learnt at pilot and present the main problems and limitations encountered, and give advices of this experimental set-up to extrapolate the data to real plant, to provide solutions to technical problems and reduce the cost of commercial plants., The authors want to thank specially to Dr. Eduard Oró (today at Institut de Recerca d’Energies de Catalunya, Spain) and Dr. Antoni Gil (today at Massachusetts Institute of Technology, USA) for their help in the design, start-up and operation of the pilot plant facility. The research leading to these results has received funding from Spanish government through CDTI granted projects (Fondo tecnológico IDI-20090393, ConSOLida CENIT 2008-1005) and from Abengoa Solar NT. The work is partially funded by the Spanish government (ENE2008-06687-C02-01/CON, ENE2011-22722, ULLE10-4E-1305, and ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). GREA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement NºPIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B1 00092).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of microencapsulated phase change material in sandwich panels

  • Castellón, Cecilia
  • Medrano Martorell, Marc
  • Roca Enrich, Joan
  • Cabeza, Luisa F.
  • Navarro, Maria E.
  • Fernández Renna, Ana Inés
  • Lázaro, Ana
  • Zalba, Belén
Sandwich panels are a good option as building materials, as they offer excellent characteristics in a modular system. The goal of this study was to demonstrate the feasibility of using the microencapsulated PCM (Micronal BASF) in sandwich panels to increase their thermal inertia and to reduce the energy demand of the final buildings. In this paper, to manufacture the sandwich panel with microencapsulated PCM three different methods were tested. In case 1, the PCM was added mixing the microencapsulated PCM with one of the components of the polyurethane. In the other two cases, the PCM was added either a step before (case 2) or a step after (case 3) to the addition of the polyurethane to the metal sheets. The results show that in case 1 the effect of PCM was overlapped by a possible increase in thermal conductivity, but an increase of thermal inertia was found in case 3. In case 2, different results were obtained due to the poor distribution of the PCM. Some samples showed the effect of the PCM (higher thermal inertia), and other samples results were similar to the conventional sandwich panel. In both cases (2 and 3), it is required to industrialize the process to improve the results., The work was partially funded by the Spanish government (project ENE2008-06687-C02-01/CON) and the European Union (COST Action COST TU0802), in collaboration with the companies Europerfil and PLASFI. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Behaviour of green facades in Mediterranean Continental climate

  • Pérez Luque, Gabriel
  • Rincón, Lídia
  • González, J. M.
  • Cabeza, Luisa F.
In order to obtain data on the behaviour of green facades in buildings as a passive system for energy savings in dry Mediterranean Continental climate a long-term work has been performed. This paper presents the first results of two actions developed during 2009. First, the growth of four different climbing plants as well as their ability to provide shadow was studied. Second, monitoring for a year of a real green facade was carried out. The results confirmed the great capacity of green facades to produce shade, reducing the heat on the facade wall of the building. It was also verified that a microclimate between the wall of the building and the green curtain are created, characterized by slightly lower temperatures and higher relative humidity. This means that the green screen acts as a wind barrier and confirms the evapotranspiration effect of the plants. On the other hand, these results did not allow withdrawing conclusions about the insulation effect of green facades., The work was partially funded by the Spanish government (Project ENE2008-06687-C02-01/CON) and the European Union (COST Action COST TU0802), in collaboration with Fundación Mapfre, the Cityhall of Golmés, and the Cityhall of Puigverd de Lleida. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Selection and characterization of recycled materials for sensible thermal energy storage

  • Navarro, Maria E.
  • Martínez, Mònica
  • Gil, Antoni
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Olives, R.
  • Py, Xavier
Alternative low cost materials are evaluated through the valorization of by-products derived from mining and metallurgical industry for solid sensible heat based energy storage systems. They were used either as received or formulated as aggregates in mortars, and their thermal and mechanical properties were characterized. A selection methodology was applied in order to compare them with available materials found in the literature for applications as (STES) materials, and with materials from Cambridge Educational Software (CES) Selector database. It was demonstrated that these recycled materials have a high potential for these thermal energy storage applications., This work was partially funded by the Spanish Government (Project ENE2008-06687-C02-01/CON and ENE2011-22722) and the European Union (COST Action COST TU0802). The authors at DIOPMA and GREA-UdL would like to thank the Catalan Government for the quality accreditation given to their research group, 2009 SGR 645 and 2009 SGR534 respectively. Antoni Gil would like to thank the Col·legi d'Enginyers Industrials de Catalunya for his research appointment and the Departament d'Universitats, Recerca i Societat de la Informació of Generalitat de Catalunya for the AGAUR research stage scholarship (BE-DGR 2010).