Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Repisalud
Publicación Artículo científico (JournalArticle)

Wt1 transcription factor impairs cardiomyocyte specification and drives a phenotypic switch from myocardium to epicardium.

  • Marques, Ines J
  • Ernst, Alexander
  • Arora, Prateek
  • Vianin, Andrej
  • Hetke, Tanja
  • Sanz-Morejón, Andrés
  • Naumann, Uta
  • Odriozola, Adolfo
  • Langa, Xavier
  • Andres-Delgado, Laura
  • Zuber, Benoît
  • Torroja, Carlos
  • Osterwalder, Marco
  • Simões, Filipa C
  • Englert, Christoph
  • Mercader, Nadia
During development, the heart grows by addition of progenitor cells to the poles of the primordial heart tube. In the zebrafish, Wilms tumor 1 transcription factor a (wt1a) and b (wt1b) genes are expressed in the pericardium, at the venous pole of the heart. From this pericardial layer, the proepicardium emerges. Proepicardial cells are subsequently transferred to the myocardial surface and form the epicardium, covering the myocardium. We found that while wt1a and wt1b expression is maintained in proepicardial cells, it is downregulated in pericardial cells that contributes cardiomyocytes to the developing heart. Sustained wt1b expression in cardiomyocytes reduced chromatin accessibility of specific genomic loci. Strikingly, a subset of wt1a- and wt1b-expressing cardiomyocytes changed their cell-adhesion properties, delaminated from the myocardium and upregulated epicardial gene expression. Thus, wt1a and wt1b act as a break for cardiomyocyte differentiation, and ectopic wt1a and wt1b expression in cardiomyocytes can lead to their transdifferentiation into epicardial-like cells.
Repisalud
Publicación Artículo científico (JournalArticle)

Spatial enhancer activation influences inhibitory neuron identity during mouse embryonic development.

  • Dvoretskova, Elena
  • Ho, May C
  • Kittke, Volker
  • Neuhaus, Florian
  • Vitali, Ilaria
  • Lam, Daniel D
  • Delgado, Irene
  • Feng, Chao
  • Torres, Miguel
  • Winkelmann, Juliane
  • Mayer, Christian
The mammalian telencephalon contains distinct GABAergic projection neuron and interneuron types, originating in the germinal zone of the embryonic basal ganglia. How genetic information in the germinal zone determines cell types is unclear. Here we use a combination of in vivo CRISPR perturbation, lineage tracing and ChIP-sequencing analyses and show that the transcription factor MEIS2 favors the development of projection neurons by binding enhancer regions in projection-neuron-specific genes during mouse embryonic development. MEIS2 requires the presence of the homeodomain transcription factor DLX5 to direct its functional activity toward the appropriate binding sites. In interneuron precursors, the transcription factor LHX6 represses the MEIS2-DLX5-dependent activation of projection-neuron-specific enhancers. Mutations of Meis2 result in decreased activation of regulatory enhancers, affecting GABAergic differentiation. We propose a differential binding model where the binding of transcription factors at cis-regulatory elements determines differential gene expression programs regulating cell fate specification in the mouse ganglionic eminence.
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Mediterranean diet for cancer prevention and survivorship

  • Monllor-Tormos, Aitana
  • García-Vigara, Alicia
  • Morgan, Orly
  • García-Pérez, Miguel Ángel
  • Mendoza Ladrón De Guevara, Nicolás|||0000-0002-1653-2509
  • Tarín, Juan F.
  • Cano, Antonio
Cancer is one of the main noncommunicable diseases in terms of health impact. Factors such as a progressively aging population point to future increases in the incidence of cancer on a global level. The elevated number of affected individuals, together with continuous improvements in cancer prevention and therapy, is creating a growing population of cancer survivors, with often inadequately met needs. Lifestyle is a key modulator of cancer risk and of associated morbidity and mortality, and is included in all approaches to the long-term management of cancer. Diet is a principal component of lifestyle, and most of the available evidence is centered on the Mediterranean diet. Our objective was to provide a narrative review of the evidence on the effect of the Mediterranean diet on cancer risk and health threats related to cancer survivorship. For this purpose, we searched the PubMed database for articles published between January 1, 2000, and June 12, 2023. Current data show that the Mediterranean diet is inversely associated with risk, or is risk neutral, for most types of cancer. Tumors of the digestive system have received preferential interest, but studies have also been published on tumors in other organs. The evidence, however, is meager due to the observational nature of most studies, although it is reassuring that benefit is reproduced in studies performed in different populations and environments. Evidence related to cancer survivors is limited by the paucity of studies, yet several findings regarding survival, recurrence, and short- and long-term morbidity suggest a potential role for the Mediterranean diet that warrants further research., EU HORIZON 2020 Research and Innovation Program (European Joint Programming Initiative “A healthy diet for a healthy life” “JPI HDHL”, ERA-NET co-fund HDHL-INTIMIC, GA no. 727565
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crosslinked fibrin gels for tissue engineering: Two approaches to improve their properties

  • Gamboa-Martinez, Tatiana Carolina
  • Luque-Guillen, Victoria
  • González-García, Cristina
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Fibrin is a protein that can be used as an ideal scaffolding material to promote tissue regeneration. In order to enhance its physical properties in this study a natural crosslinker, genipin (GP), was employed with the aim to obtain a hydrogel with tuneable properties for tissue engineering applications. The fibrin gel was crosslinked by two different methods using four concentrations of GP to get a stable hydrogel network. Crosslinking density, mechanical properties, swelling, and enzymatic degradation of the hydrogels were tested for each GP content and method employed. The method I: Crosslinking after gel formation promotes a high crosslinking and retains the gel shape for long term whilst the method II: Simultaneous gel formation and crosslinking improves the mechanical properties of the gel. This study confirms the use of GP at different concentrations as a suitable crosslinker of fibrin that promotes the cellular viability of L929 for 21 days of in vitro culture., Contract grant sponsor: Ciber-BBN, Instituto de Salud Carlos III, European Regional Development Fund
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation and identification of new QTLs for plant and fruit developmental and composition traits in eggplant under low N conditions

  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
[EN] Enhancing plant adaptation to low input conditions is a fundamental goal for implementing sustainable agriculture. In the present study, two eggplant (Solanum melongena) accessions (MEL1 and MEL5), two introgression lines (ILs) derived from eggplant wild relatives S. dasyphyllum (IL-M1-D1) and S. insanum (IL-M5-I9), and a heterozygous version of this last IL (ILHet-M5-I9), along with hybrids among them were evaluated under low N (LN) conditions. IL-M1-D1 carries an introgressed fragment of 4.9 Mb in homozygosis from S. dasyphyllum on chromosome 2, while IL-M5-I9 and ILHet-M5-I9 carry an introgression of 21.5 Mb on chromosome 9 in homozygosis and heterozygosis, respectively, from S. insanum. Multiple quantitative trait loci (QTLs) for several traits of interest were associated with both introgressions under LN conditions in a previous study with segregating advanced backcrosses. Here we evaluated the performance of these materials for 22 agronomic and developmental traits under low N fertilization (LN) conditions. Hybrids with the ILs enabled the study of genetic background effects on QTLs expression. The materials evaluated showed a significant phenotypic variation, particularly within hybrids segregating for the introgression from S. insanum in chromosome 9. Statistical analysis revealed no significant differences among hybrids carrying or not the introgression on chromosome 2 of S. dasyphyllum, and only slight differences were observed between the IL-M1-D1 and its recurrent parent S. melongena MEL1, suggesting a limited impact of this introgression on chromosome 2 on the phenotype variation. However, the differences observed between IL-M5-I9 and its recurrent parent S. melongena MEL5, together with the association between genotypic and phenotypic variation in hybrids segregating for this introgression, allowed the identification of 13 QTLs on chromosome 9. These results successfully validated the previously identified QTLs for flavonol content in leaves, nitrogen balanced index, fruit mean weight, and nitrogen content in leaves and, also revealed nine new QTLs associated with the introgressed genomic region in chromosome 9. This study emphasizes the influence of environmental conditions, genotypes, and genetic backgrounds on the phenotypic expression of eggplant QTLs introgressed from wild relatives and highlights the importance of QTL validation. These findings contribute valuable insights for developing new eggplant cultivars for a more sustainable agriculture, particularly with adaptation to LN conditions., This work was supported by the project SOLNUE in the framework of the H2020 call SusCrop-ERA-Net (ID#47) and funded by Agencia Estatal de Investigaci¿ on (PCI2019-103375), by the Spanish Ministerio de Ciencia e Innovaci¿ on, Agencia Estatal de Investigaci¿ on, (grants RTI2018-094592-B-I00 from MCIU/AEI/ FEDER, UE, and PID2021- 128148OB-I00, funded by MCIN/AEI/10.13039/501100011033/ and ESF Investing in your future ), and by Conselleria d Innovaci¿ o, Universitats, Ci` encia i Societat Digital of the Generalitat Valenciana (grant CIPROM/2021/020). The Spanish Ministerio de Ciencia e Innovaci¿ on, Agencia Estatal de Investigaci¿ on, and Fondo Social Europeo funded a predoctoral fellowship to Gloria Villanueva (PRE2019-089256). Pietro Gramazio is grateful to Spanish Ministerio de Ciencia e Innovaci¿ on for a post-doctoral grant (RYC2021-031999-I) funded by (MCIN/AEI /10.13039/ 501100011033) and the European Union through NextGenerationEU/ PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cross-national differences in consumer responses to savoury crackers containing blackcurrant pomace

  • Reibner, Anne-Marie
  • Struck, Susanne
  • Alba, Katerina
  • Proserpio, Cristina
  • Foschino, Roberto
  • Turner, Charlotta
  • Zahn, Susann
  • Rohm, Harald
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
[EN] Juice-pressing residues, among them blackcurrant pomace, are valuable materials for being upgraded in food products. Their excellent nutritional profiles in line with their functional properties allow a wide range of applications. The current study was performed to evaluate the overall liking of a pomace-enriched thin crispy-baked bread product in five European countries, and to obtain suggestions for improvements. Moreover, data on the frequency of snack consumption, openness to new foods and an opinion on residues in food applications were acquired. Four hundred and sixty-six consumers from United Kingdom, Spain, Sweden, Italy and Germany were involved. On a 9-point hedonic scale, the pomace cracker was rated towards the direction of liking with 5.94¿±¿1.90 on average. Contingency tables showed that the overall-liking correlated highly significant (p¿<¿0.01) with the country of origin and sex of the respondents and their openness to new products. Significantly higher liking scores were provided by British and Spanish consumers and, among these respondents, savoury snacks were stated to be consumed most frequently. Therefore, the snack consumption frequency also appeared to be a driver for cross-national differences in hedonic responses. The consent for using pomace in food products was remarkably high (>90%) in all countries and stresses consumer awareness in terms of healthy longevity and sustainability., The research project was approved during the second SUSFOOD ERA-Net call (). The funding of the project, assured through the national partner organisations, is gratefully acknowledged: Federal Ministry of Education and Research via PTJ in Germany (grant 031B0004), DEFRA in the United Kingdom (grant #FO0319), INIA in Spain (grant 291766) and FORMAS in Sweden. We would like to thank Dohler GmbH for supplying the blackcurrant pomace
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of alginate-extracted seaweed biomass for the development of cellulose-based packaging films

  • Cebrián-Lloret, Vera
  • Mandy Metz
  • Martínez-Abad, Antonio
  • Svein Halvor Knutsen
  • Simon Ballance
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
[EN] Seaweed residues from Alaria esculenta, Saccharina latissima and Ascophyllum nodosum after alginate extraction have been valorized to produce cellulose-based fractions with different purification degrees. The residues were mainly composed of carbohydrates (35-57%) and proteins (12-37%), Alaria and Saccharina being richer in cellulose and Ascophyllum richer in fucoidan. The lower cellulose content in the latter made it unsuitable for the extraction of cellulosic fractions. Self-supporting films were obtained from the cellulosic fractions from Saccharina and Alaria residues. While the higher cellulose purity films presented more desirable characteristics in terms of mechanical properties (with elastic moduli of ca. 5-7 GPa and elongation values of ca. 3-5%) and visual appearance, the presence of noncellulosic components in the films from less purified fractions reduced their water sensitivity and promoted greater water barrier (with water permeability values of ca. 4-6 kg.m/s.m2.Pa). These results point towards the potential of a simple alkaline extraction to generate cellulose-based films from seaweed residuals with the best compromise between functional properties and economical and environmental efficiency., This work was financially supported by the "Agencia Estatal de Investigacion" (PCI2018-092886 Grant) and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Different Properties of Geopolymer Composites Reinforced with Flax Fibers and Carbon Fibers

  • Brugaletta, Francesca
  • Becher, Anton Frederik
  • Rostagno, Danilo Laurent
  • Kim, JeongHye
  • Fresneda Medina, Jose Ignacio
  • Ziejewska, Celina
  • Marczyk, Joanna
  • Korniejenko, Kinga
[EN] The main motivation for this research was to improve the properties of geopolymers by reinforcement using synthetic and natural fibers, and to gain new knowledge regarding how the nature and/or the quantity of reinforcement fibers influences the properties of the final geopolymers. The main objective was to investigate the effects of different types of reinforcement fibers on the properties of the geopolymers. These reinforcement fibers were mainly environmentally friendly materials that can be used as alternatives to ordinary Portland cement. The authors used fly ash and river sand as the raw materials for the matrix, and added carbon fibers (CF), flax fibers (FF), or a hybrid of both (CFM) as reinforcements. The samples were prepared by mixing, casting, and curing, and then subjected to various tests. The main research methods used were compressive strength (CS), flexural strength (FS), water absorption (WA), abrasion resistance (B & ouml;hme's disk method), microstructure analysis (SEM), chemical composition (XRF), and crystal structure analysis (XRD). The results showed that the addition of fibers partially improved the mechanical properties of the geopolymers, as well as reducing microcracks. The CF-reinforced geopolymers exhibited the highest compressive strength, while the FF-reinforced geopolymers showed the lowest water absorption. The authors, based on previous research, also discussed the factors that influence fiber-matrix adhesion, and the optimal fiber content for geopolymers., This research was funded by the project titled Development of geopolymer composites as a material for protection of hazardous wrecks and other critical underwater structures against corrosion under the M-ERA.NET 3 program by the Polish National Centre for Research and Development, grant number M-ERA.NET3/2021/71/MAR-WRECK/2022, and co-financed with tax funds on the basis of the budget passed by the Saxon State Parliament (SAB).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detection of high-energy protons and gamma-rays using a novel LaBr3(Ce)-LaCl3(Ce) phoswich array

  • Nácher, Enrique
  • Perea, Ángel
  • Ribeiro, Guillermo
  • Sánchez del Río, José
  • Tengblad, Olof
  • Martensson, M.
  • Heinz, A.
  • Nilsson, T.
4 pags.; 3 figs. EURISOL Topical Meeting 2014 “Innovative Instrumentation for EURISOL”, University of York, United Kingdom, from 15th -17th July , 2014. PACS: 29.40.Mc, 29.30.Ep, 29.30.Kv, CEPA4 is a new phoswich array for the detection of high-energy protons and gammarays from nuclear reactions and spectroscopy of beta-delayed particles and gamma-rays. This new detector consists of four individual closely-packed scintillator detectors, each of them made of 4 cm of LaBr3(Ce) and 6 cm of LaCl3(Ce) in phoswich configuration (optically coupled and with a common readout). In this contribution we report on the results of a beam test performed at the Bronowice Cyclotron Centre (CCB) in Krakow, showing the response of this versatile instrument to high energy protons (70 - 230 MeV). Furthermore, we show that we can reconstruct the original energy of fast protons (E > 200 MeV) which pass through the total length of the crystal while still retaining a good energy resolution., Peer Reviewed
O2, repositorio institucional de la UOC
Publicación Artículo científico (JournalArticle)

Multicentric assessment of a multimorbidity-adjusted disability score to stratify depression-related risks using temporal disease maps: instrument validation study

  • González Colom, Rubèn
  • Mitra, Kangkana
  • Vela, Emili
  • Gézsi, András
  • Paajanen, Teemu
  • Gál, Zsófia
  • Hullam, Gabor
  • Mäkinen, Hannu
  • Nagy, Tamas
  • Kuokkanen, Mikko
  • Piera-Jiménez, Jordi
  • Roca, Josep
  • Antal, Peter
  • Juhasz, Gabriella
  • Cano, Isaac
Background: Comprehensive management of multimorbidity can significantly benefit from advanced health risk assessment tools that facilitate value-based interventions, allowing for the assessment and prediction of disease progression. Our study proposes a novel methodology, the Multimorbidity-Adjusted Disability Score (MADS), which integrates disease trajectory methodologies with advanced techniques for assessing interdependencies among concurrent diseases. This approach is designed to better assess the clinical burden of clusters of interrelated diseases and enhance our ability to anticipate disease progression, thereby potentially informing targeted preventive care interventions. Objective: This study aims to evaluate the effectiveness of the MADS in stratifying patients into clinically relevant risk groups based on their multimorbidity profiles, which accurately reflect their clinical complexity and the probabilities of developing new associated disease conditions. Methods: In a retrospective multicentric cohort study, we developed the MADS by analyzing disease trajectories and applying Bayesian statistics to determine disease-disease probabilities combined with well-established disability weights. We used major depressive disorder (MDD) as a primary case study for this evaluation. We stratified patients into different risk levels corresponding to different percentiles of MADS distribution. We statistically assessed the association of MADS risk strata with mortality, health care resource use, and disease progression across 1 million individuals from Spain, the United Kingdom, and Finland. Results: The results revealed significantly different distributions of the assessed outcomes across the MADS risk tiers, including mortality rates; primary care visits; specialized care outpatient consultations; visits in mental health specialized centers; emergency room visits; hospitalizations; pharmacological and nonpharmacological expenditures; and dispensation of antipsychotics, anxiolytics, sedatives, and antidepressants (P<.001 in all cases). Moreover, the results of the pairwise comparisons between adjacent risk tiers illustrate a substantial and gradual pattern of increased mortality rate, heightened health care use, increased health care expenditures, and a raised pharmacological burden as individuals progress from lower MADS risk tiers to higher-risk tiers. The analysis also revealed an augmented risk of multimorbidity progression within the high-risk groups, aligned with a higher incidence of new onsets of MDD-related diseases. Conclusions: The MADS seems to be a promising approach for predicting health risks associated with multimorbidity. It might complement current risk assessment state-of-the-art tools by providing valuable insights for tailored epidemiological impact analyses of clusters of interrelated diseases and by accurately assessing multimorbidity progression risks. This study paves the way for innovative digital developments to support advanced health risk assessment strategies. Further validation is required to generalize its use beyond the initial case study of MDD.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of clock drift impact over droop-free distributed control for industrial microgrids

  • Torres Martínez, Javier
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Ghahderijani, Mohammad Moradi
  • Rey López, Juan Manuel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., It is well-know that in systems composed of several digital processors, clock signals of individual units differ from each other due to clock drifts. This paper investigates the effect of clock drifts from voltage source inverters (VSI) in industrial microgrids. Particularly, a primary/secondary droopfree distributed control scheme is considered in order to evaluate its robustness against clock drifts. The study is carried out by fully experimental means using a laboratory microgrid., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Frequency-modulation control of a DC/DC current-source parallel-resonant converter

  • Moradi Ghahderijani, Mohammad
  • Castilla Fernández, Miguel
  • Momeneh, Arash
  • Miret Tomàs, Jaume
  • García de Vicuña Muñoz de la Nava, José Luis
This paper proposes a frequency-modulation control scheme for a dc/dc current-source parallel-resonant converter with two possible configurations. The basic configuration comprises an external voltage loop, an internal current loop, and a frequency modulator: the voltage loop is responsible for regulating the output voltage, the current loop makes the system controllable and limits the input current, and the modulator provides robustness against variations in resonant component values. The enhanced configuration introduces the output inductor current as a feed-forward term and clearly improves the transient response to fast load changes. The theoretical design of these control schemes is performed systematically by first deriving their small-signal models and second using Bode diagram analysis. The actual performance of the proposed control schemes is experimentally validated by testing on a laboratory prototype., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of the effect of clock drifts on frequency regulation and power sharing in inverter-based islanded microgrids

  • Martí Colom, Pau
  • Torres Martínez, Javier
  • Rosero Chandi, Carlos Xavier
  • Velasco García, Manel
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Local hardware clocks in physically distributed computation devices hardly ever agree because clocks drift apart and the drift can be different for each device. This paper analyses the effect that local clock drifts have in the parallel operation of voltage source inverters (VSIs) in islanded microgrids (MG). The state-of-the-art control policies for frequency regulation and active power sharing in VSIs-based MGs are reviewed and selected prototype policies are then re-formulated in terms of clock drifts. Next, steady-state properties for these policies are analyzed. For each of the policies, analytical expressions are developed to provide an exact quantification of the impact that drifts have on frequency and active power equilibrium points. In addition, a closed-loop model that accommodates all the policies is derived, and the stability of the equilibrium points is characterized in terms of the clock drifts. Finally, the implementation of the analyzed policies in a laboratory MG provides experimental results that confirm the theoretical analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Voltage support experimental analysis of a low-voltage ride-through strategy applied to grid-connected distributed inverters

  • Garnica López, Miguel Andrés
  • García de Vicuña Muñoz de la Nava, José Luis
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
  • Guzmán Solà, Ramon
In recent decades, different control strategies have been designed for the increasing integration of distributed generation systems. These systems, most of them based on renewable energies, use electronic converters to exchange power with the grid. Capabilities such as low-voltage ride-through and reactive current injection have been experimentally explored and reported in many research papers with a single inverter; however, these capabilities have not been examined in depth in a scenario with multiple inverters connected to the grid. Only few simulation works that include certain methods of reactive power control to solve overvoltage issues in low voltage grids can be found in the literature. Therefore, the overall objective of the work presented in this paper is to provide an experimental analysis of a low-voltage ride-through strategy applied to distributed power generation systems to help support the grid during voltage sags. The amount of reactive power will depend on the capability of each inverter and the amount of generated active power. The obtained experimental results demonstrate that, depending on the configuration of distributed generation, diverse inverters could have different control strategies. In the same way, the discussion of these results shows that the present object of study is of great interest for future research., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Voltage sag mitigation in a PV-based industrial microgrid during grid faults

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
  • García de Vicuña Muñoz de la Nava, José Luis
  • Camacho Santiago, Antonio
  • Torres Martínez, Javier
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The growing interests in industrial microgrid and its high power rating, have made it as a good candidate for voltage support purposes. The aim of this paper is to present a reactive current injection control strategy for a photovoltaic-based industrial microgrid during voltage sags. During the sag, depending on the grid code requirements, the maximum rated reactive current should be injected by the local inverters. The current can be injected through the positive and negative sequences depending on the sag characteristics and power rating of the local inverters. Moreover, to prevent over voltage, the higher phase voltage should be raised to a predefined maximum boundary. Finally, some selected simulation results are presented in order to show the features of the control scheme., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A communication-less control scheme for a variable air-gap wireless energy transfer system using current source resonant converter

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
  • Rey López, Juan Manuel
  • Torres Martínez, Javier
  • Garnica López, Miguel Andrés
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a robust control method for wireless energy transfer systems using current source resonant converter without any communication network. The proposed control strategy is valid even for systems with variable air-gap. Output voltage regulation, resonant frequency tracking and zero voltage switching condition are the main control objectives. The control strategy includes a simple modulation technique for the primary side class-D inverter and a sliding mode controller for the secondary-side full-bridge rectifier. Theoretical features of the presented control system are tested by some selected simulation results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control scheme for a multiple-output DC/DC current source parallel resonant converter

  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Guzmán Solà, Ramon
  • Rey López, Juan Manuel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The aim of this paper is to regulate the output voltages of a multiple-output DC/DC class-D current source parallel resonant converter. To this end, a sliding mode control scheme is presented consisting of an outer voltage loop, an inner current loop and a robust modulator. To devise this control scheme, the averaged large signal model of the converter is derived. In addition, this model is used to determine the stability range of the controller parameters. Some simulation results are provided to validate the expected features of the presented control configuration., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Consensus for active power sharing and frequency restoration in islanded microgrids subject to drifting clocks

  • Rosero Chandi, Carlos Xavier
  • Martí Colom, Pau
  • Velasco García, Manel
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The application of consensus theory in the control of islanded microgrids (MG) is gaining increased attention because it facilitates the development of distributed control solutions. In particular, its application to active power sharing and frequency regulation has lead to satisfactory results. This paper analyses the effect that local clock drifts have in the parallel operation of voltage source inverters (VSIs) in islanded microgrids (MG) when governed by a distributed consensus algorithm. Analytical expressions that relate the steady-state frequency and active power as a function of each VSI local drift are provided. These expressions allow extracting tuning rules for the consensus-based control algorithm. Simulation results permit corroborating the theoretical analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Control strategy for grid-connected three-phase inverters during voltage sags to meet grid codes and to maximize power delivery capability

  • Garnica López, Miguel Andrés
  • García de Vicuña Muñoz de la Nava, José Luis
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
  • Guzmán Solà, Ramon
Inverter-based distributed generation plays a vital role in the stability and reliability of new power systems. Under voltage sags, these systems must remain connected to the electrical network according to the stringent requirements of grid codes. Low-voltage ride-through control strategies are becoming a common trend in power electronics research. However, previous studies of these control strategies have not dealt with the different possible scenarios presented by new grid codes, and many of them focus on a very limited number of control objectives. In this study, an algorithm to maximize the converter capabilities was developed and subjected to experimental tests during different voltage sags. In this research, based on unbalanced voltage drops of several severity levels, six different cases of current injection are identified while taking into consideration the restrictions imposed by grid codes. The research results represent a further step towards the development of flexible controllers adaptable to the environments of intelligent electricity grids with high integration of distributed generation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Secondary switched control with no communications for islanded microgrids

  • Rey, Juan M
  • Martí Colom, Pau
  • Velasco García, Manel
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
Flexibility and reliability of AC microgrids are enhanced by reducing the dependence on communications in multi-layer hierarchical control. In this sense, this paper presents a secondary control with no communications for islanded microgrids. It is based on a control scheme that switches between two configurations according to a time-dependent protocol. With this proposal, an excellent performance in terms of transient response and frequency restoration in steady-state is achieved. The paper also presents design considerations for the control parameters. In addition, the theoretical predictions are validated by experimental results from a laboratory microgrid., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multi-layer active power and frequency control strategy for industrial microgrids

  • Rey, Juan Manuel
  • Solano, Javier
  • Torres Martínez, Javier
  • Miret Tomàs, Jaume
  • Ghahderijani, Mohammad Moradi
  • Castilla Fernández, Miguel
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Industrial microgrids require control strategies that guarantee high reliability and power quality. In this paper a multi-layer active power and frequency control strategy for industrial microgrids is presented. It is composed by a threelayer hierarchical scheme. The first control layer is based on the droop method. The secondary control layer is based on an eventdriven communication scheme that launches a protocol which controls the secondary terms. The tertiary control layer calculates an optimal economical dispatch. The proposed control guarantees an excellent performance in terms of frequency restoration and power sharing. Experimental results obtained on a laboratory microgrid are presented to validate the performance of the proposed control scheme., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Methyl-hydroxylamine as an efficacious antibacterial agent that targets the ribonucleotide reductase enzyme

  • Julián, Esther|||0000-0002-6558-3978
  • Baelo, Aida
  • Gavaldà, Joan|||0000-0002-9829-3141
  • Torrents, Eduard|||0000-0002-3010-1609
The emergence of multidrug-resistant bacteria has encouraged vigorous efforts to develop antimicrobial agents with new mechanisms of action. Ribonucleotide reductase (RNR) is a key enzyme in DNA replication that acts by converting ribonucleotides into the corresponding deoxyribonucleotides, which are the building blocks of DNA replication and repair. RNR has been extensively studied as an ideal target for DNA inhibition, and several drugs that are already available on the market are used for anticancer and antiviral activity. However, the high toxicity of these current drugs to eukaryotic cells does not permit their use as antibacterial agents. Here, we present a radical scavenger compound that inhibited bacterial RNR, and the compound's activity as an antibacterial agent together with its toxicity in eukaryotic cells were evaluated. First, the efficacy of N-methyl-hydroxylamine (M-HA) in inhibiting the growth of different Gram-positive and Gram-negative bacteria was demonstrated, and no effect on eukaryotic cells was observed. M-HA showed remarkable efficacy against Mycobacterium bovis BCG and Pseudomonas aeruginosa. Thus, given the M-HA activity against these two bacteria, our results showed that M-HA has intracellular antimycobacterial activity against BCG-infected macrophages, and it is efficacious in partially disassembling and inhibiting the further formation of P. aeruginosa biofilms. Furthermore, M-HA and ciprofloxacin showed a synergistic effect that caused a massive reduction in a P. aeruginosa biofilm. Overall, our results suggest the vast potential of M-HA as an antibacterial agent, which acts by specifically targeting a bacterial RNR.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cervical Electrical Neuromodulation Effectively Enhances Hand Motor Output in Healthy Subjects by Engaging a Use-Dependent Intervention

  • Kumru, Hatice|||0000-0002-0501-1660
  • Flores de los Heros, Africa|||0000-0003-0720-2409
  • Rodríguez-Cañón, María|||0000-0003-4093-5292
  • Edgerton, Victor|||0000-0001-6534-1875
  • García-Alén, Loreto|||0000-0001-9910-9476
  • Benito-Penalva, Jesús|||0000-0003-1232-1808
  • Navarro, X. (Xavier)|||0000-0001-9849-902X
  • Gerasimenko, Yury P.|||0000-0002-9345-3791
  • García Alias, Guillermo|||0000-0003-0197-0503
  • Vidal, Joan|||0000-0002-3952-2442
Electrical enabling motor control (eEmc) through transcutaneous spinal cord stimulation is a non-invasive method that can modify the functional state of the sensory-motor system. We hypothesize that eEmc delivery, together with hand training, improves hand function in healthy subjects more than either intervention alone by inducing plastic changes at spinal and cortical levels. Ten voluntary participants were included in the following three interventions: (i) hand grip training, (ii) eEmc, and (iii) eEmc with hand training. Functional evaluation included the box and blocks test (BBT) and hand grip maximum voluntary contraction (MVC), spinal and cortical motor evoked potential (sMEP and cMEP), and resting motor thresholds (RMT), short interval intracortical inhibition (SICI), and F wave in the abductor pollicis brevis muscle. eEmc combined with hand training retained MVC and increased F wave amplitude and persistency, reduced cortical RMT and facilitated cMEP amplitude. In contrast, eEmc alone only increased F wave amplitude, whereas hand training alone reduced MVC and increased cortical RMT and SICI. In conclusion, eEmc combined with hand grip training enhanced hand motor output and induced plastic changes at spinal and cortical level in healthy subjects when compared to either intervention alone. These data suggest that electrical neuromodulation changes spinal and, perhaps, supraspinal networks to a more malleable state, while a concomitant use-dependent mechanism drives these networks to a higher functional state.