Pasar al contenido principal

Stability and wave energy distribution of breakwaters: dimensional analysis and experimental test

FJC2020-044778-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simple and explicit neural network-derived formula to estimate wave reflection on mound breakwaters

  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] The main objective of this study was to develop a new one-parameter explicit formula to estimate wave reflection on mound breakwaters under regular and irregular waves in non-overtopping and non-breaking wave conditions. The Artificial Neural Network (ANN) methodology was used to rank a list of possible explanatory variables and to identify relationships between the key explanatory variables and wave reflection. Data corresponding to 494 small-scale two-dimensional physical tests from University of Granada (UGR) and Aalborg University (AAU) were collected to apply the ANN methodology in developing the new formula. The relative water depth, h/L, being h the water depth and L the wavelength, and the seaward slope angle, cot alpha, were found to be the two main explanatory variables for the measured squared wave reflection coefficient, K2R. An exponential relationship between K2R and (h/L) /tan alpha with only one fitting identified parameter was sufficient to explain 88% of the variance for observed KR2 corresponding to 265 tests using regular waves from the UGR laboratory. A relationship between regular and irregular wave parameters using ANN modelling and the results of 16 tests with irregular waves from UGR was also: HI = 1.416 Hrms,I and T = 1.050 T01; being HI and T the incident wave height and wave period for regular waves, and Hrms,I and T01 the incident root mean square wave height and spectral mean wave period for irregular waves. The new empirical formula depending only on (h/L) /tan alpha explained 91% of the variance for measured K2R of 213 additional tests with irregular waves from the AAU laboratory. The new formula was calibrated and validated using physical models with rock and concrete armor units, several seaward slope angles, water depths, and core permeability. The new one-parameter empirical formula showed a better agreement than other simple empirical formulas given in the literature and explained more than 65% of the variance for K2R observations from a general database used for comparison., The first author is funded through the Juan de la Cierva 2020 program (FJC 2020-044778-I) by "Union Europea - NextGenerationEU en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana", Spanish Ministry of Science and Innovation. This work is supported by two projects (1) PID 2021-126475OB-I00 and (2) PID 2021-128035OA-I00, funded by the Spanish Ministry of Science and Innovation (FEDER, UE). The authors thank Prof. Thomas Lykke Andersen and Dr. Mads R & oslash;ge Eldrup for providing the experimental data performed at the laboratory of Aalborg University. The authors also thank Prof. Barbara Zanuttigh and Dr. Sara M. Formentin for providing the database described in Zanuttigh et al. (2013), EurOtop et al. (2016), Zanuttigh et al. (2016) and Formentin et al. (2017). The manuscript was revised by Dr. Debra Westall (Universitat Politecnica de Valencia, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydraulic performance analysis for homogeneous mound breakwaters: Application of dimensional analysis and a new experimental technique

  • Díaz-Carrasco, Pilar
[EN] The main objective of this study is to apply the methodology proposed by Diaz-Carrasco et al. (2020), based on the dimensional analysis and a new experimental technique, to estimate and study the wave energy transformation on homogeneous mound breakwaters. The dimensional analysis includes the main variables of wave train, porous media and slope geometry that influence the hydraulic performance on mound breakwaters. For that, laboratory tests were performed in a wave flume for a homogeneous and permeable mound breakwater. A new experimental technique derived from the methodology of Diaz-Carrasco et al. (2020) is also applied for designing wave conditions in laboratory based on the interplay that the relative water depth, h/L, and the wave steepness, H/L, has on the hydraulic performance of the structure, called the sample space. An analysis was conducted to study the influence that each dimensionless variable has on wave energy transformation. The experimental results shows that there is a relationship between the reflected, K2 ������, transmitted, K ������2, and dissipated energy, D*, and the product of the relative water depth, h/L, and the incident wave steepness, HI/L. The selection of wave conditions from the new experimental technique of sample space allows quantifying regions of wave energy transformation and wave breaker types on the breakwater and it seems to be a useful technique for designing laboratory conditions., The author would like to thank Professor Emeritus Miguel Á. Losada whose help, conceptualisation and earlier draft of the text made this study possible. The first author is funded through the Juan de la Cierva 2020 program (FJC2020-044778-I) by Unión Europea - NextGenerationEU en el marco del Plan de Recuperación, Transformación y Resiliencia de España , Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neural Network calibration method for VARANS models to simulate wave-coastal structures interaction.

  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] This study develops a calibration method for the porous media to properly model the interaction between waves and coastal structures using VARANS models. The proposed method estimates the porosity, np, and the optimum values of the Forchheimer coefficients, and , that best represent the wave-structure interaction for a complete set of laboratory tests. Physical tests were conducted in a 2D wave flume for a homogeneous mound breakwater under regular wave conditions. Numerical tests were carried out using the IH-2VOF model to simulate the corresponding physical tests and incident wave conditions (HI, T). The numerical tests covered a wide range of Forchheimer coefficients found in the literature, and , and the porosity, np, with a total of 555 numerical tests. The results of 375 numerical tests using IH-2VOF were used to train a Neural Network (NN) model with five input variables (HI, T, np, and ) and one output variable . The NN model explained more than 90% (R2 > 0.90 and RMSE <5%) of the variance of the squared coefficient of reflection, . This NN model was used to estimate the in a wide range of np, and , and the error () between the physical measurements with regular waves and the NN estimations of was calculated. The results of as function of np, and showed that for a given porosity, np, it was difficult to obtain a pair of and values that gave a common low error if few physical tests are used for calibration. Then to calibrate properly a VARANS model it seems necessary to check the results obtained for each combination of and with many laboratory {HI, T} tests. The minimum root-mean-square error of ( was calculated to find the optimum values of porosity and Forchheimer coefficients: np = 0.44, = 200 and = 2.825 for the tested structure. Blind tests were conducted with the remaining 180 numerical tests using IH-2VOF to validate the proposed method for VARANS models. In this study, eight or more physical tests were required to find adequate values of np, and for VARANS models related to the best performance of wave-porous structure interaction., The first author is funded through the Juan de la Cierva 2020 program (FJC 2020-044778-I) by " Union Europea - NextGenerationEU en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana ", Spanish Ministry of Science and Innovation. This work is supported by two projects (1) PID 2021-126475OB-I00 and (2) PID 2021-128035OA- I00, funded by the MCIN/AEI/10.13039/501100011033 and, as appropriate, by " ERDF A way of making Europe", by the " European Union NextGenerationEU/PRTR". The authors thank Professor Javier L. Lara and the Environmental Hydraulics Institute of Cantabria (IH-Cantabria, Spain) for providing the IH-2VOF numerical model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical construction tests to assess the feasibility of placement grids for Cubipod Homogeneous Low-Crested Structures

  • Muñoz-Palao, Sergio
  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Placement grid design is a key phase when constructing armor layers in mound breakwaters. Homogeneous Low-Crested Structures (HLCS) are low-crested structures designed as artificial reefs for marine colonization, coral reef regeneration and beach protection. The placement grid affects the construction feasibility, hydraulic stability and wave transmission of HLCS. This study presents a numerical methodology to simulate a realistic placement procedure for armor units during the construction of HLCS. This numerical simulator is based on the open-source physics engine Bullet Physics Engine (BPE), which applies Newton's laws of motion to rigid bodies. From an initial theorical placement grid for Cubipod HLCS, a series of numerical realistic unit placement tests are carried out to emulate the placement process at prototype scale; placement velocity and spatial deviation of crawler cranes are given parameters associated with each specific project. Considering the placement velocity and spatial deviation during construction, the quality of each specific placement grid is associated with the measured placement errors and the corresponding initial construction deviation to HLCS. This numerical methodology is valuable to understand the influence and the uncertaintly of the construction procedure of armor layers in mound breakwaters., This study was funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe under grants HOLOBREAK (RTI2018-101073-B-I00), REMOBE (PID2021-126475OB-I00) and HOLOBRACE (PID2021-128035OA-I00). The first author is grateful for the financial support of MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe under grant PRE2019-089542. The second author is funded through the Juan de la Cierva 2020 program (FJC2020-044778- I) by Union Europea NextGenerationEU en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana , Spanish Ministry of Science and Innovation. The manuscript was revised by Debra Westall (Universitat Politecnica de Valencia, Spain).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Neural Network calibration method for VARANS models to simulate wave-coastal structures interaction

  • Diaz-Carrasco, Pilar
  • Molines, Jorge
  • Gómez-Martín, M. Esther
  • Medina, Josep
This study develops a calibration method for the porous media to properly model the interaction between waves and coastal structures using VARANS models. The proposed method estimates the porosity, np, and the optimum values of the Forchheimer coefficients, α and β, that best represent the wave-structure interaction for a complete set of laboratory tests. Physical tests were conducted in a 2D wave flume for a homogeneous mound breakwater under regular wave conditions. Numerical tests were carried out using the IH-2VOF model to simulate the corresponding physical tests and incident wave conditions (HI, T). The numerical tests covered a wide range of Forchheimer coefficients found in the literature, α and β, and the porosity, np, with a total of 555 numerical tests. The results of 375 numerical tests using IH-2VOF were used to train a Neural Network (NN) model with five input variables (HI, T, np, α and β) and one output variable (KR2). The NN model explained more than 90% (R2 > 0.90 and RMSE <5%) of the variance of the squared coefficient of reflection, KR2. This NN model was used to estimate the KR2 in a wide range of np, α and β, and the error (εa) between the physical measurements with regular waves and the NN estimations of KR2 was calculated. The results of εa as function of np, α and β showed that for a given porosity, np, it was difficult to obtain a pair of α and β values that gave a common low error if few physical tests are used for calibration. Then to calibrate properly a VARANS model it seems necessary to check the results obtained for each combination of α and β with many laboratory {HI, T} tests. The minimum root-mean-square error of KR2 (εrms) was calculated to find the optimum values of porosity and Forchheimer coefficients: np = 0.44, α = 200 and β = 2.825 for the tested structure. Blind tests were conducted with the remaining 180 numerical tests using IH-2VOF to validate the proposed method for VARANS models. In this study, eight or more physical tests were required to find adequate values of np, α and β for VARANS models related to the best performance of wave-porous structure interaction.