Pasar al contenido principal

REPARACION Y REHABILITACION DE DIQUES EN TALUD

PID2021-126475OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simple and explicit neural network-derived formula to estimate wave reflection on mound breakwaters

  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] The main objective of this study was to develop a new one-parameter explicit formula to estimate wave reflection on mound breakwaters under regular and irregular waves in non-overtopping and non-breaking wave conditions. The Artificial Neural Network (ANN) methodology was used to rank a list of possible explanatory variables and to identify relationships between the key explanatory variables and wave reflection. Data corresponding to 494 small-scale two-dimensional physical tests from University of Granada (UGR) and Aalborg University (AAU) were collected to apply the ANN methodology in developing the new formula. The relative water depth, h/L, being h the water depth and L the wavelength, and the seaward slope angle, cot alpha, were found to be the two main explanatory variables for the measured squared wave reflection coefficient, K2R. An exponential relationship between K2R and (h/L) /tan alpha with only one fitting identified parameter was sufficient to explain 88% of the variance for observed KR2 corresponding to 265 tests using regular waves from the UGR laboratory. A relationship between regular and irregular wave parameters using ANN modelling and the results of 16 tests with irregular waves from UGR was also: HI = 1.416 Hrms,I and T = 1.050 T01; being HI and T the incident wave height and wave period for regular waves, and Hrms,I and T01 the incident root mean square wave height and spectral mean wave period for irregular waves. The new empirical formula depending only on (h/L) /tan alpha explained 91% of the variance for measured K2R of 213 additional tests with irregular waves from the AAU laboratory. The new formula was calibrated and validated using physical models with rock and concrete armor units, several seaward slope angles, water depths, and core permeability. The new one-parameter empirical formula showed a better agreement than other simple empirical formulas given in the literature and explained more than 65% of the variance for K2R observations from a general database used for comparison., The first author is funded through the Juan de la Cierva 2020 program (FJC 2020-044778-I) by "Union Europea - NextGenerationEU en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana", Spanish Ministry of Science and Innovation. This work is supported by two projects (1) PID 2021-126475OB-I00 and (2) PID 2021-128035OA-I00, funded by the Spanish Ministry of Science and Innovation (FEDER, UE). The authors thank Prof. Thomas Lykke Andersen and Dr. Mads R & oslash;ge Eldrup for providing the experimental data performed at the laboratory of Aalborg University. The authors also thank Prof. Barbara Zanuttigh and Dr. Sara M. Formentin for providing the database described in Zanuttigh et al. (2013), EurOtop et al. (2016), Zanuttigh et al. (2016) and Formentin et al. (2017). The manuscript was revised by Dr. Debra Westall (Universitat Politecnica de Valencia, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new design formula to estimate wave transmission on cubipod homogeneous low-crested structures

  • Díaz-Carrasco, Pilar
  • Mares-Nasarre, Patricia
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] This study presents a new explicit empirical formula to estimate wave transmission on Cubipod Homogeneous Low-Crested Structures (HLCS) under depth-limited breaking wave conditions. The formula was derived using Artificial Neural Networks (ANN) to identify and quantify the influence of nineteen candidate explanatory variables on the squared wave transmission coefficient, K2T. A total of 210 two-dimensional physical model tests conducted at the Universitat Polite`cnica de Vale`ncia (Spain) were used to calibrate the formula. The dimensionless crest freeboard using the nominal diameter (Rc/Dn50) and the dimensionless incident wave height at the structure toe using the water depth (Hm0,I/hs) were identified as the most relevant explanatory variables. A new two-variable formulation with 3 fitting-parameters was found to estimate the proportion of transmitted energy, K2T, with a coefficient of determination R2 = 0.89. The proposed formula was also applied to an external dataset of experimental tests on Cubipod HLCS previously reported in the literature. The results demonstrated a significantly better agreement than existing empirical formulas confirming the robustness and applicability of the new formula. The proposed formula is a reliable and easy-to-apply new tool for the preliminary design of emerged and submerged undamaged HLCS in depth-limited breaking wave conditions. The new explicit formula is particularly suited for low-crested structures aimed at combining coastal protection and ecosystem enhancement, such as artificial reefs in coral environments., The authors acknowledge the support from grant RTI 2018-101073-B-I00 (HOLOBREAK) and PD 2021-128035OA-I00 (HOLOBRACE) funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

2D experimental study on tsunami-like flow hydrodynamics and their effect on the hydraulic stability of Cubipod Homogeneous Low-Crested Structures

  • Dasí, Paula
  • Ripoll, Enrique
  • Molines, Jorge|||0000-0001-7850-0759
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Tsunamis are natural phenomena which may have devastating economic and social consequences. Designing structures against tsunami impact can reduce their effects and the recovery time; however, information about tsunami loads on low-crested structures is limited. This study provides (1) a methodology to calibrate a discharge gate operation to generate tsunami-like flows, and (2) the results on hydraulic stability of Cubipod Homogeneous Low-Crested Structures under tsunami attack. In this study, tsunami-like flows have been studied in a wave flume using a discharge gate as the generation mechanism. Semiempirical formulas are proposed to characterize tsunami-like flows, including bore type and maximum amplitude; the proposed neural network-derived formulas have a good fit to physical observations. The semiempirical formulas given in this study have been calibrated for a specific wave flume characteristics. Depending on the shape of the bore, water velocities can be calculated as those corresponding to a solitary wave model or as a function of the tsunami-like wave height and a constant which is a function of the wave flume characteristics. A Cubipod Homogeneous Low-Crested Structure (HLCS) was tested against tsunami-like flows in a wave flume; these structures showed a brittle failure with a stability number Ns = 2.16., The authors acknowledge the financial support from MCIN/AEI/10.13039/501100011033 and by ERDF/EU under grants PID2021126475OB-I00, PID2021-128035OA-I00 and PID2024-160815OB-I00. The first author is also financially supported through the grant PRE2022-101813 funded by MICIU/AEI/10.13039/501100011033 and by "ESF+". Authors thank funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new method to measure damage progression in Homogeneous Low-Crested Structures with a low-cost 3D depth-sensor

  • Muñoz-Palao, Sergio
  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Mechanical profilers are commonly used to measure damage to rubble mound breakwaters in small-scale physical tests. This study developed a non-intrusive methodology using low-cost 3D depth-sensors to measure damage progression in Homogeneous Low-Crested Structures (HLCS) with and without water in the wave flume. Although light refraction causes distortion in the presence of water, distorted scans are corrected with this new method using a Neural Network (NN) model. The new methodology is adequate to obtain undistorted profiles of emerged or submerged breakwaters and may be described in two steps: (1) a digital profiler algorithm, to describe the breakwater models in series of profiles in order to measure damage, and (2) a trained NN model, to correct the distortions caused by light refraction for the scans taken with water in the wave flume. The NN model to correct profiles requires two sets of scans, one in empty conditions and the other in submerged conditions; the two scans (dry-wet) can be easily obtained without disturbing the usual test programs. This is done by taking the scans at the beginning (dry and wet) and at the end (wet and dry) of each test series. By comparing profiles, the breakwater damage can be analysed after obtaining the series of undistorted profiles from the trained NN model and the distorted scans. To validate the method, a series of small-scale physical tests with Cubipod HLCS were carried out from no damage to severe damage, and then the estimations given by the trained NN models were compared with blind observations, taken from additional pairs of dry and wet scans. The good agreement between the observations and the estimations (R-2 > 0.985, r > 0.993) showed that low-cost 3D depth-sensors may be used as non-intrusive methods for breakwater profiling, even when scanning is done with water in the wave flume or basin., The first author is grateful for the financial support of MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" under grant PRE2019-089542. This study was supported by two projects: (1) REMOBE (PID2021-126475OB-I00) and (2) HOLOBRACE (PID2021-128035OA-I00) funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe", by the "European Union NextGenerationEU/PRTR". The manuscript was revised by Debra Westall (Universitat Politecnica de Valencia, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neural Network calibration method for VARANS models to simulate wave-coastal structures interaction.

  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] This study develops a calibration method for the porous media to properly model the interaction between waves and coastal structures using VARANS models. The proposed method estimates the porosity, np, and the optimum values of the Forchheimer coefficients, and , that best represent the wave-structure interaction for a complete set of laboratory tests. Physical tests were conducted in a 2D wave flume for a homogeneous mound breakwater under regular wave conditions. Numerical tests were carried out using the IH-2VOF model to simulate the corresponding physical tests and incident wave conditions (HI, T). The numerical tests covered a wide range of Forchheimer coefficients found in the literature, and , and the porosity, np, with a total of 555 numerical tests. The results of 375 numerical tests using IH-2VOF were used to train a Neural Network (NN) model with five input variables (HI, T, np, and ) and one output variable . The NN model explained more than 90% (R2 > 0.90 and RMSE <5%) of the variance of the squared coefficient of reflection, . This NN model was used to estimate the in a wide range of np, and , and the error () between the physical measurements with regular waves and the NN estimations of was calculated. The results of as function of np, and showed that for a given porosity, np, it was difficult to obtain a pair of and values that gave a common low error if few physical tests are used for calibration. Then to calibrate properly a VARANS model it seems necessary to check the results obtained for each combination of and with many laboratory {HI, T} tests. The minimum root-mean-square error of ( was calculated to find the optimum values of porosity and Forchheimer coefficients: np = 0.44, = 200 and = 2.825 for the tested structure. Blind tests were conducted with the remaining 180 numerical tests using IH-2VOF to validate the proposed method for VARANS models. In this study, eight or more physical tests were required to find adequate values of np, and for VARANS models related to the best performance of wave-porous structure interaction., The first author is funded through the Juan de la Cierva 2020 program (FJC 2020-044778-I) by " Union Europea - NextGenerationEU en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana ", Spanish Ministry of Science and Innovation. This work is supported by two projects (1) PID 2021-126475OB-I00 and (2) PID 2021-128035OA- I00, funded by the MCIN/AEI/10.13039/501100011033 and, as appropriate, by " ERDF A way of making Europe", by the " European Union NextGenerationEU/PRTR". The authors thank Professor Javier L. Lara and the Environmental Hydraulics Institute of Cantabria (IH-Cantabria, Spain) for providing the IH-2VOF numerical model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical construction tests to assess the feasibility of placement grids for Cubipod Homogeneous Low-Crested Structures

  • Muñoz-Palao, Sergio
  • Díaz-Carrasco, Pilar
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Placement grid design is a key phase when constructing armor layers in mound breakwaters. Homogeneous Low-Crested Structures (HLCS) are low-crested structures designed as artificial reefs for marine colonization, coral reef regeneration and beach protection. The placement grid affects the construction feasibility, hydraulic stability and wave transmission of HLCS. This study presents a numerical methodology to simulate a realistic placement procedure for armor units during the construction of HLCS. This numerical simulator is based on the open-source physics engine Bullet Physics Engine (BPE), which applies Newton's laws of motion to rigid bodies. From an initial theorical placement grid for Cubipod HLCS, a series of numerical realistic unit placement tests are carried out to emulate the placement process at prototype scale; placement velocity and spatial deviation of crawler cranes are given parameters associated with each specific project. Considering the placement velocity and spatial deviation during construction, the quality of each specific placement grid is associated with the measured placement errors and the corresponding initial construction deviation to HLCS. This numerical methodology is valuable to understand the influence and the uncertaintly of the construction procedure of armor layers in mound breakwaters., This study was funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe under grants HOLOBREAK (RTI2018-101073-B-I00), REMOBE (PID2021-126475OB-I00) and HOLOBRACE (PID2021-128035OA-I00). The first author is grateful for the financial support of MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe under grant PRE2019-089542. The second author is funded through the Juan de la Cierva 2020 program (FJC2020-044778- I) by Union Europea NextGenerationEU en el marco del Plan de Recuperacion, Transformacion y Resiliencia de Espana , Spanish Ministry of Science and Innovation. The manuscript was revised by Debra Westall (Universitat Politecnica de Valencia, Spain).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Numerical construction tests to assess the feasibility of placement grids for Cubipod Homogeneous Low-Crested Structures

  • Muñoz-Palao, Sergio
  • Diaz-Carrasco, Pilar
  • Molines, Jorge
  • Gómez-Martín, M. Esther
  • Medina, Josep R.
Placement grid design is a key phase when constructing armor layers in mound breakwaters. Homogeneous Low-Crested Structures (HLCS) are low-crested structures designed as artificial reefs for marine colonization, coral reef regeneration and beach protection. The placement grid affects the construction feasibility, hydraulic stability and wave transmission of HLCS. This study presents a numerical methodology to simulate a realistic placement procedure for armor units during the construction of HLCS. This numerical simulator is based on the open-source physics engine Bullet Physics Engine (BPE), which applies Newton's laws of motion to rigid bodies. From an initial theorical placement grid for Cubipod HLCS, a series of numerical realistic unit placement tests are carried out to emulate the placement process at prototype scale; placement velocity and spatial deviation of crawler cranes are given parameters associated with each specific project. Considering the placement velocity and spatial deviation during construction, the quality of each specific placement grid is associated with the measured placement errors and the corresponding initial construction deviation to HLCS. This numerical methodology is valuable to understand the influence and the uncertaintly of the construction procedure of armor layers in mound breakwaters.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Neural Network calibration method for VARANS models to simulate wave-coastal structures interaction

  • Diaz-Carrasco, Pilar
  • Molines, Jorge
  • Gómez-Martín, M. Esther
  • Medina, Josep
This study develops a calibration method for the porous media to properly model the interaction between waves and coastal structures using VARANS models. The proposed method estimates the porosity, np, and the optimum values of the Forchheimer coefficients, α and β, that best represent the wave-structure interaction for a complete set of laboratory tests. Physical tests were conducted in a 2D wave flume for a homogeneous mound breakwater under regular wave conditions. Numerical tests were carried out using the IH-2VOF model to simulate the corresponding physical tests and incident wave conditions (HI, T). The numerical tests covered a wide range of Forchheimer coefficients found in the literature, α and β, and the porosity, np, with a total of 555 numerical tests. The results of 375 numerical tests using IH-2VOF were used to train a Neural Network (NN) model with five input variables (HI, T, np, α and β) and one output variable (KR2). The NN model explained more than 90% (R2 > 0.90 and RMSE <5%) of the variance of the squared coefficient of reflection, KR2. This NN model was used to estimate the KR2 in a wide range of np, α and β, and the error (εa) between the physical measurements with regular waves and the NN estimations of KR2 was calculated. The results of εa as function of np, α and β showed that for a given porosity, np, it was difficult to obtain a pair of α and β values that gave a common low error if few physical tests are used for calibration. Then to calibrate properly a VARANS model it seems necessary to check the results obtained for each combination of α and β with many laboratory {HI, T} tests. The minimum root-mean-square error of KR2 (εrms) was calculated to find the optimum values of porosity and Forchheimer coefficients: np = 0.44, α = 200 and β = 2.825 for the tested structure. Blind tests were conducted with the remaining 180 numerical tests using IH-2VOF to validate the proposed method for VARANS models. In this study, eight or more physical tests were required to find adequate values of np, α and β for VARANS models related to the best performance of wave-porous structure interaction.