Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the influence of the fuel and boundary conditions over the soot formation in multi-hole diesel injectors using high-speed color diffused back-illumination technique

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Cardona-Vargas, Santiago
  • Ayyapureddi, Sridhar
[EN] Two prototypes multi-hole diesel injector from a high-pressure common rail system were used to operated with diesel and n-Heptane fuels in a high-pressure and high-temperature test rig able to reach 1100 K and 15 MPa under different oxygen concentrations with the goal to study the influence of the boundary conditions on the combustion process evaluating parameters as ignition delay, lift-off length and soot formation. A novel optical set-up was implemented to visualize the soot cloud evolution in the fuel jet between 30 and 85 nun from the nozzle exit using the high-speed color diffused back-illumination technique, it was used as a result of the insertion of a high-pressure window in the injector holder opposite to the frontal window of the vessel allowing an optical arrangement in line-of-sight. The experiments performed in this work used a LED with a wavelength of 460 nm to provide information about physical of the soot properties, the results of varying the operational conditions show the reduction of soot formation with an increase in injection pressure, a reduction in ambient temperature, a reduction in oxygen concentration or a reduction in ambient density. Furthermore, fuel effect on soot formation also has been studied showing a big difference between both fuels, diesel is known to be more prone to produce soot than n-Heptane reducing the ability of the technique implemented, especially in conditions with high temperature and high density., This research has been funded by Jaguar Land Rover. The author Santiago Cardona thanks the Universitat Politecnica de Valencia for his predoctoral contract (FPI-2016-S1), which is included within the framework of Programa de Apoyo para la InvestigaciOn y Desarrollo (PAID -01-2016). We would like to thank Omar Huerta for his collaboration during the measurement campaign and laboratory work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rate of injection measurements of a direct-acting piezoelectric injector for different operating temperatures

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Mata, Carmen
  • Viera-Sotillo, Alberto Antonio
[EN] As the regulations for pollutant emissions in diesel engines are increasingly restrictive, the introduction of the piezoelectric direct-acting injectors seeks to improve the overall efficiency of the injection system, and consequently reduce combustion contaminants. In such systems, the needle lift is governed by the charge, or voltage, applied to the piezo stack, allowing for a more precise control over the fuel injection process. Although it is known that the performance of the piezoelectric crystals depends on its temperature of operation, the effect this has on the rate of injection is still unclear. In this research, a particular setup was used to measure the rate of injection of a direct-acting injector for different operating temperatures. It was mounted into an injection discharge rate curve indicator with a particular holder that has a cooling sleeve connected to a circuit running ethylene glycol, which is driven by a thermoregulator unit. A parametric sweep of different piezo stack control voltages for three rail pressures and operating temperatures was carried out. On the results, when needle lift does not influence internal flow development, the rate of injection was controlled by the injection pressure, with minimal impact from the working temperature, resembling results from conventional hydraulic injectors. At partial needle lift, two operating regions were observed, delimited by a particular voltage level. Above it, the needle throttling was able to control mass fuel flow accurately. But below it, the stabilized rate of injection values decreased drastically. The rate of this decline was dependent only on the injection pressure. The threshold level, named critical voltage, increased linearly with increasing injection pressure and working temperature. Also, to maintain a constant fuel mass flow for decreasing operating temperature, the voltage level of the control signal had to be reduced. These results highlight the importance of monitoring and controlling the operating conditions of the direct-acting injectors, as their performance and efficiency are both influenced by the working temperature of the piezo stack., This research has been partially funded by FEDER and Spanish Ministerio de Economía y Competitividad through project TRA2015-67679-c2-1-R. Additionally, financial support to Dr. Carmen Mata was provided by Ayudas para estancias en otras universidades y centros de investigación 2017 of Universidad de Castilla la Mancha. Likewise, Alberto Viera is supported through the FPI contract 2016-S2-1361 of Programa de Apoyo para la Investigación y Desarrollo (PAID) of Universitat Poltècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast 3-D heat transfer model for computing internal temperatures in the bearing housing of automotive turbochargers

  • Gil, A.|||0000-0001-7192-6992
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Rodriguez-Usaquen, Yuly Tatiana
  • Mijotte, G.
[EN] Each of the elements that make up the turbocharger has been gradually improved. In order to ensure that the system does not experience any mechanical failures or loss of efficiency, it is important to study which engine operating conditions could produce the highest failing rate. Common failing conditions in turbochargers are mostly achieve due to oil contamination and high temperatures in the bearing system. Thermal management becomes increasingly important for the required engine performance. Therefore, it has become necessary to have accurate temperature and heat transfer models. Most thermal design and analysis codes need data for validation; often the data available falls outside the range of conditions the engine experiences in reality leading to the need to interpolate and extrapolate disproportionately. This paper presents a fast 3D heat transfer model for computing internal temperatures in the central housing for non-water cooled turbochargers and its direct validation with experimental data at different engine operating conditions of speed and load. The presented model allows a detailed study of the temperature rise of the central housing, lubrication channels, and maximum level of temperature at different points of the bearing system of an automotive turbocharger. It will let to evaluate thermal damage done to the system itself and influences on the working fluid temperatures, which leads oil coke formation that can affect the performance of the engine. Thermal heat transfer properties obtained from this model can be used for to feed and improve a radial lumped model of heat transfer that predicts only local internal temperatures[1]. Model validation is illustrated and finally the main results are discussed., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Authors want to acknowledge the Apoyo para la investigación y Desarrollo (PAID) grant for doctoral studies (FPI-2016-S2-1354).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new trifocal corneal inlay for presbyopia

  • Furlan, Walter D.
  • Montagud-Martínez, Diego
  • Garcia-Delpech, Salvador
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Corneal inlays (CIs) are the most recent surgical procedure for the treatment of presbyopia in patients who want complete independence from the use of glasses or contact lenses. Although refractive surgery in presbyopic patients is mostly performed in combination with cataract surgery, when the implantation of an intraocular lens is not necessary, the option of CIs has the advantage of being minimally invasive. Current designs of CIs are, either: small aperture devices, or refractive devices, however, both methods do not have good performance simultaneously at intermediate and near distances in eyes that are unable to accommodate. In the present study, we propose the first design of a trifocal CI, allowing good vision, at the same time, at far, intermediate and near vision in presbyopic eyes. We first demonstrate the good performance of the new inlay in comparison with a commercially available CI by using optical design software. We next confirm experimentally the image forming capabilities of our proposal employing an adaptive optics based optical simulator. This new design also has a number of parameters that can be varied to make personalized trifocal CI, opening up a new avenue for the treatment of presbyopia., This work was supported by Ministerio de Ciencia e Innovacion, Spain (Grant PID2019-107391RB-I00) and by Generalitat Valenciana, Spain, (Grant PROMETEO/2019/048). D. Montagud-Martinez and V. Ferrando acknowledge the financial support from the Universitat Politecnica de Valencia, Spain (fellowships FPI-2016 and PAID-10-18, respectively)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurements of the mass allocation for multiple injection strategies using the rate of injection and momentum flux signals

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Viera, Alberto
[EN] As legislations set very stringent environmental and fuel economy standards, researchers have pushed into a continuous development in all areas of the diesel engine. The recent evolution of the injection technologies has permitted to modify the fuel-delivery strategies. From what was a single pulse per injection event, modern systems allow to inject up to eight different times precisely per combustion cycle. In such sense, experimental results of the rate of injection and momentum flux could be useful for validation and improvement of computational models. Moreover, accurately quantifying the injected mass per pulse in a fuel-gas interface can provide data with more realistic engine-like conditions. To this end, this research presents measurements of the rate of injection and momentum flux for two simple multiple injection strategies: a pilot-main and a main-post. Boundary conditions included two rail and discharge pressures, two different pilot/post quantities and four dwell times. A new approach was employed to estimate the mass allocation with the momentum flux data, and results were compared to the rate of injection traces to verify the distribution calculated. On the results, signals for each pulse were successfully decoupled using its rising and falling edge. The shot-to-shot variability of the pilot/post injection was highly dependent on its transitory characteristics, and on the dwell time for post injections due to internal pressure waves. The injected mass per pulse was successfully measured as well in the momentum flux test rig, and the energizing time changed slightly to account for the different operation interfaces. Signals from both measurement campaigns showed a remarkable agreement when compared, ascertain the possibility of measuring the injected mass, and its allocation for multiple injection strategies, in the momentum flux test rig., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research was partially funded by the Spanish Ministerio de Ciencias, Investigacion y Universidades through project RTI2018-099706-B-I00. Part of the experimental hardware was purchased through funds obtained from Generalitat Valenciana and FEDER through project IDIFEDER/2018/037. In addition, A.V. was supported through the FPI contract 2016-S2-1361 of "`Programa de Apoyo para la Investigacion y Desarrollo (PAID)'' of Universitat Poltecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental investigation of the lift-offheight and soot formation of a spray flame for different co-flow conditions and fuels

  • Gimeno, Jaime|||0000-0003-3317-9994
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Carreres, Marcos|||0000-0001-6430-6613
  • Cardona-Vargas, Santiago
[EN] Since the combustion process in spray flames is a highly complex multi-phase phenomenon, which involves several simultaneous processes such as atomization, vaporization, and chemical kinetics, it is still not fully understood. In the present work, an experimental investigation has been performed for three different hydrocarbon fuels (n-Heptane, n-Decane, n-Dodecane), in order to understand the effect of varying co-flow conditions, fuel mass flow rate, and fuel type on both the flame lift-off height and soot formation. The fuels were injected through a hollow-cone spray injector, with a nominal spray cone angle of 80 degrees and orifice diameter of 120 mu m in an annular non-swirled preheated air co-flow. The flame lift-off height was determined by recording the OH * chemiluminescence, whereas soot formation has been determined through the color diffused back-illumination extinction technique. From the results, it has been observed for a certain fuel that the flame lift-off height is mainly controlled by the co-flow velocity and air co-flow temperature. The results also show that the fuel that yields largest droplet size and that possesses the lowest volatility exhibits the highest flame lift-off height. Furthermore, the results evidence a strong influence of the co-flow velocity on the soot formation. With an increase in co-flow velocity, the flame lift-off height is increased and so the amount of air entrainment, leading to a less rich reaction zone just downstream of the lift-off height, which in turn results in less soot formation. Finally, the comparison among different fuels shows that their differences in soot formation are likely related to fuel sooting tendency. This property, in turn, depends on the fuel molecular structure playing an important role on its determination., This research was funded bythe Spanish Ministerio de Ciencias, Investigacion y Universidades through project RTI2018-099706-BI00. Part of the experimental hardware was purchased through funds obtained from Spanish Ministerio de Ciencias, Investigacion y Universidades and FEDER through project EQC2019-005818-P. The author Santiago Cardona Vargas would like to thank Universitat Politecnica de Valencia for his Predoctoral contract (FPI-2016-S1), which is included within the framework of Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-2016). The authors are thankful to Jose Enrique Del Rey and Omar Huerta for helping in the technical issues, also to Carlos Gil Martinez for helping during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differences between single and double-pass schlieren imaging on diesel vapor spray characteristics

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Viera-Sotillo, Alberto Antonio
[EN] The use olschlieren imaging at high acquisition rate has been adopted as a standard optical technique for the analysis of vaporizing diesel sprays under engine-like conditions. A single-pass schlieren arrangement is typically used for the study of axially drilled single-orifice nozzles, as vessels with multiple optical accesses regularly allow line of sight visualization. Contrarily, for multi-spray nozzles, measurements are commonly performed through a single,optical access, in which case a double-pass arrangement is employed. As a consequence, the light beams pass through the test section twice, increasing the optical sensitivity of the schlieren setup. However, the influence this has on the macroscopic spray characteristics is still unclear. The scope of this study is to analyze the differences in vapor phase penetration and spreading angle measured for the same injection event, through high-speed imaging, for both single and double-pass schlieren configurations. Experiments were carried out with a three hole nozzle with a nominal orifice diameter of 90 mu m, named Spray B from the Engine Combustion Network, using commercially available diesel fuel and in non-reactive conditions. The impact of different injection pressures, chamber temperatures and densities on the spray captured by each setup was assessed. On the results, vapor. phase penetration and spreading angle followed the expected trend found in the literature, for the different boundary conditions tested. Comparing the optical setups, vapor phase penetration and spreading angle results obtained with the double-pass arrangement were marginally higher than those from the single-pass. The deviation was observed throughout all tested conditions. For spray tip penetration, although the discrepancy was approximately constant for different injection pressures and chamber temperature, it increased with increasing density. These results highlight the importance of a proper understanding regarding the limitations of optical diagnostics, in particular for results used in calibration of computational models. (C) 2017 Elsevier Ltd. All rights reserved., This research has been partially funded by FEDER and Spanish Ministerio de Economia y Competitividad through project TRA2015-67679-C2-1-R. Additionally, Alberto Viera is supported through the FPI contract 2016-S2-1361 of "Programa de Apoyo para la Investigacion y Desarrollo (PAID)" of Universitat Poltecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of acoustic reciprocity and conservativeness in exhaust aftertreatment systems

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Guilain, S.
  • Dubarry, M.
[EN] Tightening emission standards limiting gas and aerosol emissions from internal combustion engines have led to the extensive use of exhaust aftertreatment systems (EATS) with different chemical functions as a solution to meet standards requirements. Incidentally, the placement of aftertreatment monolithic devices into the exhaust line also plays a key role on the exhaust noise emission. Their presence disturbs the pattern of the pressure waves and sets the boundary conditions for the silencer design. The impact of the EATS on wave transmission can be analyzed by means of the transmission or scattering matrix. The present work discusses the implications of acoustic reciprocity and conservativeness on the definition of the scattering matrix elements. The fulfillment of these properties in real operating conditions was evaluated against a set of experimental data obtained for several exhaust aftertreatment monolithic bricks in an impulse test rig. The influence of different excitation amplitudes and superimposed mean flows was also considered. Once it was shown that the devices are reciprocal, the need to account for dissipation phenomena was evidenced. Finally, the application of reciprocity and conservativeness together with dissipation provided simple expressions allowing to predict the response of the EATS in the inverse direction, i.e. from outlet to inlet, from the transmission and reflection properties obtained in the direct direction. Thus, the proposed procedure becomes useful to reduce both the required number of tests and the gas dynamics modelling work in methodologies driven to assess the acoustic response of EATS based on the use of experimental and computational tools. (C) 2018 Elsevier Ltd. All rights reserved., This research has been partially supported by FEDER and the Government of Spain through project TRA2016-79185-R. Additionally, the Ph.D. student Enrique José Sanchis has been funded by a grant from Universitat Politècnica de València with reference FPI-2016-S2-1355.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Impact of Particulate Matter Distribution on Pressure Drop of Wall-Flow Particulate Filters

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
[EN] Wall-flow particulate filters are a required exhaust aftertreatment system to abate particulate matter emissions and meet current and incoming regulations applying worldwide to new generations of diesel and gasoline internal combustion engines. Despite the high filtration efficiency covering the whole range of emitted particle sizes, the porous substrate constitutes a flow restriction especially relevant as particulate matter, both soot and ash, is collected. The dependence of the resulting pressure drop, and hence the fuel consumption penalty, on the particulate matter distribution along the inlet channels is discussed in this paper taking as reference experimental data obtained in water injection tests before the particulate filter. This technique is demonstrated to reduce the particulate filter pressure drop without negative effects on filtration performance. In order to justify these experimental data, the characteristics of the particulate layer are diagnosed applying modeling techniques. Different soot mass distributions along the inlet channels are analyzed combined with porosity change to assess the new properties after water injection. Their influence on the subsequent soot loading process and regeneration is assessed. The results evidence the main mechanisms of the water injection at the filter inlet to reduce pressure drop and boost the interest for control strategies able to force the re-entrainment of most of the particulate matter towards the inlet channels' end., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through Grant No. TRA2016-79185-R. Additionally, the Ph.D. student Enrique Jose Sanchis has been funded by a grant from Universitat Politecnica de Valencia with the reference FPI-2016-S2-1355.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to study oil-coking problem in small turbochargers

  • Serrano, J.R.|||0000-0003-0692-3917
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Rodriguez-Usaquen, Yuly Tatiana
  • Guillaume, Mijotte
[EN] In compliance with oncoming emission directives, turbocharging and increasing complexity in the turbocharger system demands a great effort from researchers on the development of effective procedures and tools to cope with the new technological exigencies. This article describes a methodology for studying oil-coking influence in turbocharger performance. A preliminary evaluation and calibration is done. The aim of this work focuses on the development of methodologies and tools that help to evaluate and understand the consequences that degraded oils can generate in the bearing system during enhanced oil-coking procedure. Several experimental tests have been carried out in an engine test bench and using an independent lubrication system that only feeds the turbocharger. The test campaign is done under a specific engine cycle and using oil artificially contaminated at two different levels. The work is divided into two parts. The first part provides a description and definition of test conditions for measuring of the maximum temperature in the bearing system and the second part tackles the measurement and post-processing of the main instantaneous parameters defining the engine and turbocharger behavior., The authors would like to acknowledge the Apoyo para la investigación y Desarrollo (PAID) grant for doctoral studies (FPI-2016-S2-1354). This work was partially supported by FEDER and the Spanish Ministry of Economy and Competitiveness through Grant Number TRA2016-79185-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Internal pore diffusion and adsorption impact on the soot oxidation in wall-flow particulate filters

  • Macian Martinez, Vicente
  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
[EN] The automotive industry is driven its efforts to cleaner internal combustion engines. As a result, the engine has become conditioned by the exhaust aftertreatment systems. The regeneration of wall-flow particulate filters (PFs) evidences such an interaction. The PFs prevent the soot emission whereas, as a counterpart, the fuel consumption increases. Consequently, passive and active regeneration strategies are needed to clean the filter back and limit the penalty in CO2. In this context, modelling tools play a key role to achieve a comprehensive understanding and control of the regeneration. In this work, a regeneration model coupled to a one-dimensional compressible unsteady flow solver for PFs is presented. The importance of the main physical and chemical steps related to the soot oxidation is discussed. The influence of the diffusion of gaseous reactants inside the primary soot particles is firstly addressed. The inclusion of this step into the definition of the reaction rate provides temperature dependence to the soot specific surface. Next, the reactants adsorption is analysed. This step leads to define a surface coverage, which behave as an equivalent reaction order. It allows figuring out the influence of the gaseous reactants concentration on the reaction rate and its dependence with the temperature. (C) 2019 Elsevier Ltd. All rights reserved., This research has been partially supported by FEDER and the Government of Spain through project TRA2016-79185-R. Additionally, the Ph.D. student Enrique José Sanchis has been funded by a grant from Universitat Politècnica de València with reference FPI-2016-S2-1355.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Foetal Immune Response Activation and High Replication Rate during Generation of Classical Swine Fever Congenital Infection

  • Bohórquez Garzón, José Alejandro|||0000-0002-6715-1757
  • Muñoz-González, Sara
  • Pérez-Simó, Marta
  • Muñoz, Iván
  • Rosell, Rosa|||0000-0002-8294-1159
  • Coronado, Liani|||0000-0003-4278-0589
  • Domingo, Mariano|||0000-0002-9623-4826
  • Ganges, Llilianne|||0000-0002-8644-3560
Classical swine fever virus (CSFV) induces trans-placental transmission and congenital viral persistence; however, the available information is not updated. Three groups of sows were infected at mid-gestation with either a high, moderate or low virulence CSFV strains. Foetuses from sows infected with high or low virulence strain were obtained before delivery and piglets from sows infected with the moderate virulence strain were studied for 32 days after birth. The low virulence strain generated lower CSFV RNA load and the lowest proportion of trans-placental transmission. Severe lesions and mummifications were observed in foetuses infected with the high virulence strain. Sows infected with the moderately virulence strain showed stillbirths and mummifications, one of them delivered live piglets, all CSFV persistently infected. Efficient trans-placental transmission was detected in sows infected with the high and moderate virulence strain. The trans-placental transmission occurred before the onset of antibody response, which started at 14 days after infection in these sows and was influenced by replication efficacy of the infecting strain. Fast and solid immunity after sow vaccination is required for prevention of congenital viral persistence. An increase in the CD8+ T-cell subset and IFN-alpha response was found in viremic foetuses, or in those that showed higher viral replication in tissue, showing the CSFV recognition capacity by the foetal immune system after trans-placental infection.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identification of an Immunosuppressive Cell Population during Classical Swine Fever Virus Infection and Its Role in Viral Persistence in the Host

  • Bohórquez Garzón, José Alejandro|||0000-0002-6715-1757
  • Muñoz-González, Sara
  • Pérez-Simó, Marta
  • Revilla, Concepción
  • Domínguez, Javier|||0000-0001-7256-388X
  • Ganges, Llilianne|||0000-0002-8644-3560
Classical swine fever virus (CSFV) remains a highly important pathogen, causing major losses in the swine industry. Persistent infection is highly relevant for CSFV maintenance in the field; however, this form of infection is not fully understood. An increase in the granulocyte population has been detected in CSFV persistently infected animals. The aim of this work was to evaluate the possible immunosuppressive role of these cells in CSFV persistent infection. The phenotype of peripheral blood and bone marrow cells from persistently infected and naïve animals was evaluated by flow cytometry, and the capacity of specific cell subsets to reduce the interferon gamma (IFN-γ) response against unspecific and specific antigen was determined using co-culture assays. The frequency of granulocytic cells was increased in cells from CSFV persistently infected pigs and they showed a phenotype similar to immunosuppressive cell populations found in persistent infection in humans. These cells from persistently infected animals were able to reduce the IFN-γ response against unspecific and specific antigen. Our results suggest that immature immunosuppressive cell populations play a role in CSFV persistent infection in swine. The information obtained by studying the role of myeloid derived suppressor cells (MDSC) during CSFV persistent infection may extrapolate to other viral persistent infections in mammals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Removal of the Erns RNase Activity and of the 3' Untranslated Region Polyuridine Insertion in a Low-Virulence Classical Swine Fever Virus Triggers a Cytokine Storm and Lethal Disease

  • Wang, M.
  • Bohórquez Garzón, José Alejandro|||0000-0002-6715-1757
  • Muñoz-González, Sara
  • Gerber, M.
  • Alberch, Mònica
  • Pérez-Simó, Marta
  • Abad Morejón de Girón, Xavier|||0000-0003-1818-1236
  • Liniger, M.
  • Ruggli, Nicolas|||0000-0002-7679-6290
  • Ganges, Llilianne|||0000-0002-8644-3560
In this study, we assessed the potential synergistic effect of the E RNase activity and the poly-U insertion in the 3' untranslated region (UTR) of the low-virulence classical swine fever virus (CSFV) isolate Pinar de Rio (PdR) in innate and adaptive immunity regulation and its relationship with classical swine fever (CSF) pathogenesis in pigs. We knocked out the E RNase activity of PdR and replaced the long polyuridine sequence of the 3' UTR with 5 uridines found typically at this position, resulting in a double mutant, vPdR-HK-5U. This mutant induced severe CSF in 5-day-old piglets and 3-week-old pigs, with higher lethality in the newborn (89.5%) than in the older (33.3%) pigs. However, the viremia and viral excretion were surprisingly low, while the virus load was high in the tonsils. Only alpha interferon (IFN-a) and interleukin 12 (IL-12) were highly and consistently elevated in the two groups. Additionally, high IL-8 levels were found in the newborn but not in the older pigs. This points toward a role of these cytokines in the CSF outcome, with age-related differences. The disproportional activation of innate immunity might limit systemic viral spread from the tonsils and increase virus clearance, inducing strong cytokine-mediated symptoms. Infection with vPdR-HK-5U resulted in poor neutralizing antibody responses compared with results obtained previously with the parent and RNase knockout PdR. This study shows for the first time the synergistic effect of the 3' UTR and the E RNase function in regulating innate immunity against CSFV, favoring virus replication in target tissue and thus contributing to disease severity.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effects of exercise interventions on the functional status of acutely hospitalised older adults: A systematic review and meta-analysis

  • Valenzuela Tallón, Pedro Luis|||0000-0003-1730-3369
  • Morales, Javier S.
  • Castillo García, Adrián
  • Mayordomo Cava, Jennifer
  • Garcia Hermoso, Antonio
  • Izquierdo, Mikel
  • Serra Rexach, Jose A.
  • Lucia, Alejandro
12 p., Background: Acute hospitalisation can have adverse effects in older adults, notably functional decline. We aimed to summarize evidence on the effects of exercise interventions in acutely hospitalised older adults. Methods: Relevant articles were systematically searched (PubMed, Web of Science, Rehabilitation & Sports Medicine Source, and EMBASE) until 19th March 2020. Randomized controlled trials (RCTs) of in-hospital exercise interventions versus usual care conducted in older adults (> 60yrs) hospitalised for an acute medical condition were included. Methodological quality of the studies was assessed with the PEDro scale. Primary outcomes included functional independence and physical performance. Intervention effects were also assessed for other major outcomes (length of hospital stay, incidence of readmission, and mortality). A meta-analysis was conducted when >= 3 studies analysed the same outcome. Results: Fifteen studies from 12 RCTs (n = 1748) were included. Methodological quality of the studies was overall high. None of the studies reported any adverse event related to the intervention. Exercise interventions improved functional independence at discharge (standardized mean difference [SMD] = 0.64, 95% confidence interval = 0.19-1.08) and 1-3 months post-discharge (SMD = 0.29, 95%CI = 0.13-0.43), as well as physical performance (SMD = 0.57, 95%CI = 0.18-0.95). No between-group differences were found for length of hospital stay or risk of readmission or mortality (all p > 0.05). Conclusions: In-hospital supervised exercise interventions seem overall safe and effective for improving - or attenuating the decline of - functional independence and physical performance in acutely hospitalised older adults. The clinical relevance of these findings remains to be confirmed in future research., Universidad de Alcalá, Ministerio de Educación, Cultura y Deporte, Ministerio de Economía y Competitividad, Fondo Europeo de Desarrollo Regional
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Joint association of physical activity and body mass index with cardiovascular risk: a nationwide population-based cross-sectional study

  • Valenzuela Tallón, Pedro Luis|||0000-0003-1730-3369
  • Santos Lozano, Alejandro
  • Torres Barrán, Alberto
  • Fernández Navarro, Pablo
  • Castillo García, Adrián
  • Ruilope, Luis M.
  • Ríos Insúa, David
  • Ordovas, Jose M.
  • Ley, Victoria
  • Lucia, Alejandro
3 p., Universidad de Alcalá, Ministerio de Ciencia e Innovación, Fondos Europeos de Desarrollo Regional
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Intradialytic exercise: one size doesn't fit all

  • Valenzuela Tallón, Pedro Luis|||0000-0003-1730-3369
  • Alba, Ana de
  • Pedrero Chamizo, Raquel
  • Morales, Javier S.
  • Cobo, Fernando
  • Botella, Ana
  • González Gross, Marcela
  • Pérez, Margarita
  • Lucia, Alejandro
  • Marín López, M. T.
8 p., Purpose: Hemodialysis patients commonly have impaired physical performance and mental health. We studied the effects of an intradialytic exercise program on these variables. Methods: 27 patients (33% women; 68 +/- 13 years) were enrolled in a 14-week intradialytic endurance-resistance training program ('exercise' group, 40 programmed sessions per patient); 40 hemodialysis patients (28% women; 68 +/- 11 years) performing no exercise during the same time length were used as controls. Endpoints included physical performance (6-min walk test [6MWT], 10-repetition sit to stand [STS-10] and handgrip strength), emotional status (Beck's depression inventory and State-Trait Anxiety Inventory), and mental and physical component scores of the short-from (SF)-12 Health Survey. Results: There were no differences (p > 0.05) between groups at baseline for sex distribution, or mean age, body mass index and time spent on dialysis. Exercise benefits were observed for 6MWT (11 and -3% for the exercise and control groups, respectively; p 0.05) were observed for emotional status endpoints or SF-12 component scores. Despite significant benefits on physical performance, the proportion of clinically meaningful responders was low ( 0.05). Conclusion: A 14-week intradialytic training program induced significant improvements on physical performance. However, the rate of clinically meaningful responders observed in the present study was low, being the level of responsiveness dependent on baseline physical status. Efforts to individualize exercise prescription are needed in clinical practice., Ministerio de Economía y Competitividad, Ministerio de Educación, Cultura y Deporte, Universidad de Alcalá, Fondo Europeo de Desarrollo Regional
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Exercise benefits on Alzheimer's disease: state of the science

  • Valenzuela Tallón, Pedro Luis|||0000-0003-1730-3369
  • Castillo García, Adrián
  • Morales, Javier S.
  • Villa Polo, Pedro de la|||0000-0001-9856-6616
  • Hampel, Harald
  • Emanuele, Enzo
  • Lista, Simone
  • Lucia, Alejandro
15 p., Although there is no unanimity, growing evidence supports the value of regular physical exercise to prevent Alzheimer's disease as well as cognitive decline in affected patients. Together with an introductory summary on epidemiological evidence, the aim of this review is to summarize the current knowledge on the potential biological mechanisms underlying exercise benefits in this condition. Regular physical exercise has proven to be beneficial for traditional cardiovascular risk factors (e.g., reduced vascular flow, diabetes) involved in the pathogenesis of Alzheimer's disease. Exercise also promotes neurogenesis via increases in exercise-induced metabolic factors (e.g., ketone bodies, lactate) and muscle-derived myokines (cathepsin-B, irisin), which in turn stimulate the production of neurotrophins such as brain-derived neurotrophic factor. Finally, regular exercise exerts anti-inflammatory effects and improves the brain redox status, thereby ameliorating the pathophysiological hallmarks of Alzheimer's disease (e.g., amyloid-beta deposition). In summary, physical exercise might provide numerous benefits through different pathways that might, in turn, help prevent risk and progression of Alzheimer's disease. More evidence is needed, however, based on human studies., Ministerio de Economía y Competitividad, Ministerio de Educación, Cultura y Deporte, Universidad de Alcalá, Fundación para la Investigación sobre el Alzheimer de Francia, Fondo Europeo de Desarrollo Regional