Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CO2 separation using thin film composite membranes of acid-hydrolyzed PIM-1

  • Yu, M.
  • Foster, A. B.
  • Alshurafa, M.
  • Luque-Alled, J. M.
  • Gorgojo, P.
  • Kentish, S. E.
  • Scholes, C. A.
  • Budd, P. M.
The polymer of intrinsic microporosity PIM-1 was synthesized with different topologies and negligible network content. A more rapid heating rate from room temperature yielded a predominantly di-substituted PIM-1 (D-PIM-1), whereas a marginally lower heating rate produced a more branched structure (B-PIM-1). Both polymers were acid-hydrolyzed to give carboxylic acid functionalization (cPIM-1), as indicated by FT-IR, 1H NMR, and elemental analysis. Both PIM-1 and cPIM-1 were processed into self-supported membranes and into thin film composite (TFC) membranes on a polyacrylonitrile support. For a 70% hydrolyzed polymer (D-cPIM-1-70%), the initial CO2 permeance reached 7700 GPU, with ideal selectivity of 56 for CO2/N2 and 37 for CO2/CH4. D-PIM-1 and D-cPIM-1-70% showed 85% and 52% CO2 permeance drop after 60 days’ aging, respectively. B-PIM-1, with initial CO2 permeance of 3100 GPU and ideal selectivity of 19 for CO2/N2 and 11 for CO2/CH4, showed only a 65% decrease. Polymer that was both branched and hydrolyzed (B-cPIM-1-73&81%), with CO2 permeance of 3200 GPU and selectivity of 64 for CO2/N2 and 45 for CO2/CH4, showed no decrease of CO2 permeance after 60 days. The branched structure is crucial for reducing membrane aging. Plasticization gave rise to reduced selectivity in mixed gas experiments, but nevertheless TFC membranes prepared from B-cPIM-1-81% were able to concentrate CO2 to 38% from a 10% CO2/90% N2 mixture at 4.8 bar.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluating the durability and performance of polyoxometalate-ionic liquid coatings on calcareous stones: Preventing biocolonisation in outdoor environments

  • Eyssautier-Chuine, S.
  • Franco-Castillo, I.
  • Misra, A.
  • Hubert, J.
  • Vaillant-Gaveau, N.
  • Streb, C.
  • Mitchell, S. G.
Rock-based materials exposed to outdoor environments are naturally colonised by an array of microorganisms, which can cause dissolution and fracturing of the natural stone. Biocolonisation of monuments and architectures of important cultural heritage therefore represents an expensive and recurring problem for local authorities and private owners alike. In this area, preventive strategies to mitigate biocolonisation are generally preferred to curative approaches, such as mechanical cleaning by brush or high-pressure cleaning, to remove pre-existing patina. The aim of this work was to study the interaction between biocidal polyoxometalate-ionic liquid (POM-IL) coatings and calcareous stones and evaluate the capacity of these coatings to prevent biocolonisation through a series of accelerated ageing studies in climate chambers, carried out in parallel with a two-year period of outdoor exposure in north-eastern France. Our experiments show that POM-IL coatings did not affect water vapour transfer nor significantly alter the total porosity of the calcareous stones. Simulated weathering studies replicating harsh (hot and wet) climatic weather conditions demonstrated that the colour variation of POM-IL-coated stones did not vary significantly with respect to the natural uncoated stones. Accelerated biocolonisation studies performed on the weathered POM-IL-coated stones proved that the coatings were still capable of preventing colonisation by an algal biofilm. However, a combination of colour measurements, chlorophyll fluorescence data, and scanning electron microscopy imaging of stones aged outdoors in northern France for two years showed that coated and uncoated stone samples showed signs of colonisation by fungal mycelium and phototrophs. Altogether, our results demonstrate that POM-ILs are suitable as preventative biocidal coatings for calcareous stones, but the correct concentrations must be chosen to achieve a balance between porosity of the stone, the resulting colour variation and the desired duration of the biocidal effect over longer periods of time, particularly in outdoor environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of a hybrid CuS-ICG polymeric photosensitive vector and its application in antibacterial photodynamic therapy

  • Yus, Cristina
  • Alejo, Teresa
  • Quílez, Cristina
  • Irusta, Silvia
  • Velasco, Diego
  • Arruebo, Manuel
  • Sebastian, Victor
At the present time, owing to the extremely high growth of microbial resistance to antibiotics and, consequently, the increased healthcare associated costs and the loss of efficacy of current treatments, the development of new therapies against bacteria is of paramount importance. For this reason, in this work, a hybrid synergetic nanovector has been developed, based on the encapsulation of a NIR (near infrared) photosensitive molecule (indocyanine green, ICG) in biodegradable polymeric nanoparticles (NPs). In addition, copper sulfide nanoparticles (CuS NPs), optically sensitive to NIR, were anchored on the polymeric nanoparticle shell in order to boost the generation of reactive oxygen species (ROS) upon NIR irradiation. As a result, the nanohybrid synthesized material is capable to generate ROS on demand when exposed to a NIR laser (808 nm) allowing for the repeated triggering of ROS production upon NIR light exposure. After each irradiation, the ROS generated were able to eliminate pathogenic bacteria, as it was demonstrated in-vitro with three bacterial strains, Staphylococcus aureus ATCC 25923 used as a reference strain (S. aureus), S. aureus USA300 (methicillin-resistantstrain, MRSA) and GFP-expressing antibiotic-sensitive S. aureus (methicillin-sensitive strain, MSSA). Finally, the effect of the hybrid NPs in the skin bed was tested on a plasma-derived in vitro skin model. Fluorescence and histological images showed the presence of CuS NPs all over the dermal layer lacking epidermis of the skin construct. Thus, the in vitro model facilitated the prediction of the nanovector's behavior in a human skin equivalent, showcasing its potential application against topical infections after wounding.