Pasar al contenido principal

DESCARBONIZACION DE LA INDUSTRIA SIDERURGICA A PARTIR DE E-HIDROGENO RENOVABLE, CAPTURA DE CO2 Y METANIZACION

PID2021-126164OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Integration of carbon capture technologies in blast furnace based steel making: a comprehensive and systematic review

  • Perpiñán, J.
  • Peña, B.
  • Bailera, M.
  • Eveloy, V.
  • Kannan, P.
  • Raj, A.
  • Lisbona, P.
  • Romeo, L. M.
Decarbonization of the iron and steel industry, which accounts for 7–9% of global annual emissions, is a strategic objective to achieve carbon emissions reduction targets in line with climate change policies, while maintaining economic competitiveness. Carbon capture (CC) technologies are of critical importance to achieve these goals. This work presents the first systematic review of the integration of CC technologies in the blast furnace-basic oxygen furnace (BF-BOF) steelmaking route, which is expected to maintain a dominant market share over the coming decades. Integration options for post-combustion, looping cycles, oxy-combustion and pre-combustion are described and compared in terms of energy penalty, carbon emissions abatement potential, cost, technology readiness level, and practical deployment considerations. The review yielded 188 studies from peer-reviewed articles and technical papers. Research is mainly focused on chemical absorption, physical adsorption, and oxy-blast furnace technologies, but other carbon capture methods including calcium looping, Sorption Enhanced Water Gas Shift, and membranes appear promising in terms of cost and carbon emission reduction. This article provides an in-depth analysis of the current state of the art and crucial considerations for future decision making in the techno-economic selection and integration of CC technologies. Barriers to overcome for practical implementation are also identified and discussed in this article.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Technical and economic assessment of iron and steelmaking decarbonization via power to gas and amine scrubbing

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
  • Romeo, Luis M.
  • Eveloy, Valerie
The iron and steel industry is one of the most energy-intensive industries, emitting 5% of the total anthropogenic carbon dioxide (CO2). The control of CO2 emissions has become increasingly stringent in the European Union (EU), resulting in EU allowance above 90 €/tCO2. Carbon capture will be required to achieve CO2 emissions control, and carbon utilization via power-to-gas could significantly increase interest in carbon capture in the iron and steel sector. This paper presents a new concept that combines amine scrubbing with power-to-gas to reduce emissions in blast furnace-basic oxygen furnace steelmaking plants. Synthetic natural gas (SNG) is produced using green hydrogen from water electrolysis and CO2 from steelmaking. The synthetic natural gas is later used as a reducing agent in the blast furnace, constantly recycling carbon in a closed loop and avoiding geological storage. The oxygen by-produced via electrolysis eliminates the necessity of an air separation unit. By applying these innovations to steelmaking, a reduction in CO2 emissions of 9.4% is obtained with an energy penalty of 16.2 MJ/kgCO2, and economic costs of 52 €/tHM or 283 €/tCO2. A sensitivity analysis with respect to electricity and the CO2 allowances prices is also performed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Full oxygen blast furnace steelmaking: From direct hydrogen injection to methanized BFG injection

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
This paper presents a novel concept of Power to Gas in an oxygen blast furnace, through blast furnace gas methanation and direct H2 injection. The PEM electrolyser produces H2, which reacts with the CO and CO2 from the blast furnace gas forming synthetic natural gas. The latter gas is injected into the blast furnace, closing a carbon loop and avoiding CO2 emissions. A parametric analysis is performed to vary the H2:CO2 ratio in the methanation reaction. Different ratios are simulated and compared, among of which the most representative are: (i) 2.5, where unreacted CO2 is directly recycled with the synthetic natural gas; (ii) 4, where stoichiometric conditions are found and the synthetic gas is composed mostly by CH4; and (iii) 8, where an excess of H2 is found in the synthetic gas; and (iv) an infinite ratio, where only H2 is injected in the blast furnace. In the latter, the methanation plant is not required, and no synthetic natural gas is produced. The results show that low H2:CO2 ratios perform poorly, involving high PEM sizes and high costs but only a 5% of CO2 avoidance (compared to conventional blast furnaces). A H2:CO2 ratio of 4 and full H2 injection results in higher reduction of CO2 emissions (33.8 % and 28.6%) with carbon abatement costs of 260 and 245 €/tCO2, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Power to gas and top gas recycling integration in an oxygen blast furnace steelmaking industry

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
  • Kannan, Pravin
  • Eveloy, Valerie
  • Romeo, Luis M.
A new process concept integrating power to methane with top gas recycling in an oxygen blast furnace (BF) is investigated to reduce the emission intensity of steelmaking. Power to gas produces synthetic methane using hydrogen (H2) generated by an electrolyser operated with renewable electricity, and CO2 captured from the BF gas by amine scrubbing supplied with heat from the methanation process. The clean gas from the amine scrubbing is recycled and injected in the BF (via top gas recycling), together with synthetic methane. A parametric analysis is performed to vary the amount of top gas recycled (from 0 kg/tHM to 270 kg/tHM). Based on the results, CO2 equivalent emissions can decrease by 34% using power to gas technology, and by 30% with power to gas and top gas recycling (compared to conventional BFs). Nevertheless, if both integrations are present, additional benefits on the specific energy consumption (12.0 MJ/tHM), and specific cost (130 €/tHM) are achieved, compared to only applying power to gas (17.5 MJ/tHM and 233 €/tHM). In all cases, the downstream thermal energy needs of the steel plant are fulfilled, contrarily to conventional top gas recycling concepts. The main conclusion is that top gas recycling should be considered together with PtG technology, and vice versa, when integrated in blast furnace ironmaking, in order to both abate emissions while supplying downstream energy needs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Outline of all potential Power to Gas integrations in blast furnace ironmaking: A systematic review

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
This work presents the first systematic review analysis of potential Power to Gas integrations in blast furnace ironmaking. The primary objective of the paper is to evaluate the PtG technology implementation in both conventional air-blown and full oxygen blast furnaces, considering different BFG recycling routes (upper, shaft or tuyeres), and synthetic gases (SNG, H2 or syngas). Employing a systematic methodology, the paper compares all the studies using 14 Key Performance Indicators (KPI) and elaborates a discussion on the main findings and limitations, proposing areas for future research. PtG application enables air-blown blast furnaces to cut emissions to 1060 kgCO2/tHM. With PtG and top gas recycling, oxygen blast furnaces achieve a reduction to 747 kgCO2/tHM, and when combined with geological storage, the reduction further drops to 435 kgCO2/tHM. Additionally, the authors propose a novel PtG-ironmaking integration based on the findings of this paper.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development, testing, performance analysis and modelling of a biochar-based catalyst for methanation reaction

  • Peña, Begoña
  • Bailera, Manuel
  • Legaz, Jorge
  • Barón, Cristian
  • Garlatti, Silvia
  • Zampilli, M.
  • Slopiecka, K.L.
  • Guilera, Jordi
  • Martín, Elena
  • Fantozzi, Francesco
  • Romeo, Luis M.
  • Lisbona, Pilar
Hydrogenation of CO2 to produce synthetic methane is a promising alternative to reduce the dependence on fossil fuels of high-temperature industrial processes hard to be electrified, contributing to mitigation of global warming. To reach enough conversion ratios and reasonable reactor sizes, the Sabatier reaction is usually performed via heterogeneous catalysis. Metallic catalysts, as nickel or ruthenium, are the most used supported over mesoporous alumina. The present work proposes and fully investigates for the first time the use of olive kernel biochar obtained from pyrolysis as support of methanation catalyst. The so-obtained biochar, with 530 m2/g specific surface area, is evaluated as a cost-effective and sustainable support. A Ni-based (10 wt%) catalyst was synthesized and tested in a fixed-bed methanation pilot plant. The obtained conversion ratios for gas hourly space velocity of 6000 h−1 were above 60 % for stoichiometric ratio and atmospheric pressure. A kinetic model was developed and validated with experimental measurements, finding discrepancies below 10 % between predictions and experiments. Even though the H2-TPR analyses revealed incomplete nickel reduction during the activation stage, the preliminary results are very promising as the achieved performance figures are similar, even higher, than that obtained in pressurized facilities and/or using Ni-Ce catalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pilot-plant experimental tests and kinetic model validation of Ru-based catalytic methanation: assessment of operating pressure and filler material on carbon conversion

  • Pascual, S.
  • Barón, C.
  • Katla, D.
  • Skorek-Osikowska, A.
  • Wecel, D.
  • Bailera, M.
  • Legaz, J.
  • Peña, B.
  • Lisbona, P.
The production of synthetic methane is crucial for the energy transition in hard-to-electrify industries. This study assesses the reactor filler (Al2O3 and SiC) and operating pressure (1 and 4 bar) effects on methane performance of a commercial Ru-Al2O3 catalyst. Three catalytic methanation parameters are tested over a wide range: temperatures (200–450 °C), gas hourly space velocities (8000–120,000 h−1), and H2/CO2 molar ratios (3.5–5.5). Experiments are conducted in two pilot plants located at the Universidad de Zaragoza and the Silesian University of Technology. Results demonstrate a high level of reproducibility between the two pilot plants, using Al2O3 filler at 1 bar. Additionally, a kinetic model is validated with experimental measurements, showing an error margin of ±5 % between the model and experimental data. Regarding the effects of operational pressure and reactor filler, the best carbon conversion results are obtained with Al2O3 filler at 4 bar (up to 98 %). For both reactors, a 5 % reduction in carbon conversion is observed at 450 °C for SiC filler. Methane selectivity remains above 99 % in all cases, except for SiC filler at 1 bar (90 %). However, SiC filler shows better thermal diffusion, facilitating operational control.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental assessment of carbon mitigation retrofit pathways in integrated BF-BOF steel plants under electricity supply scenarios

  • Pascual, S.
  • Barón, C.
  • Bailera, M.
  • Peña, B.
  • Llera, E.
  • Lisbona, P.
Decarbonizing the iron and steel industry is critical for sustainable economic development. This study applies Life Cycle Assessment (LCA) to evaluate the environmental and energy implications of four novel carbon mitigation retrofit pathways compared to a conventional blast furnace-basic oxygen furnace (BF-BOF) plant (S0). These scenarios integrate retrofit technologies into existing infrastructure: amine-based carbon capture for storage (S1), Power-to-Gas technology for methanol synthesis (S2), a methanation process for internal gas substitution (S3), or direct hydrogen utilization via blast furnace injection (S4). Results indicate that S1 achieves the highest reduction in global warming potential (32%), constrained by the residual coke requirements of the blast furnace, while fossil resource scarcity decreases by 4% in S2 and S4. Although mineral resource scarcity remains stable across all scenarios, water consumption in electrolyzer-based systems triples, contributing 22% to the direct electrolyzer demand and 78% to the indirect raw materials and energy mix. Non-renewable energy use drops by 26% in scenarios with a high renewable energy integration (S2, S3 and S4). Sensitivity analysis reveals that electricity sourcing is the primary driver of environmental performance; a highly non-renewable European energy mix increases global warming potential, fossil resource scarcity, non-renewable cumulative energy demand and water consumption by up to 115%. Conversely, the 100% wind-powered alternative drastically reduces carbon emissions but slightly increases mineral resource scarcity (4.5%), due to infrastructure requirements. Overall, while Power-to-Gas and hydrogen integration significantly decouple existing steelmaking from fossil fuel dependence, these findings define the realistic boundaries of retrofit decarbonization, demonstrating that low-carbon electricity infrastructure is a strict prerequisite for circular carbon and hydrogen deployment in integrated BF-BOF systems.