Pasar al contenido principal

Methanation, carbon recycling and decarbonization of industry

RYC2022-038283-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Outline of all potential Power to Gas integrations in blast furnace ironmaking: A systematic review

  • Perpiñán, Jorge
  • Bailera, Manuel
  • Peña, Begoña
This work presents the first systematic review analysis of potential Power to Gas integrations in blast furnace ironmaking. The primary objective of the paper is to evaluate the PtG technology implementation in both conventional air-blown and full oxygen blast furnaces, considering different BFG recycling routes (upper, shaft or tuyeres), and synthetic gases (SNG, H2 or syngas). Employing a systematic methodology, the paper compares all the studies using 14 Key Performance Indicators (KPI) and elaborates a discussion on the main findings and limitations, proposing areas for future research. PtG application enables air-blown blast furnaces to cut emissions to 1060 kgCO2/tHM. With PtG and top gas recycling, oxygen blast furnaces achieve a reduction to 747 kgCO2/tHM, and when combined with geological storage, the reduction further drops to 435 kgCO2/tHM. Additionally, the authors propose a novel PtG-ironmaking integration based on the findings of this paper.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Testing Ni-based catalysts for the methanation of industrial gases at different levels of sulfur poisoning: From catalysts formulation optimization to kinetics

  • Bailera, Manuel
  • Bacariza, Carmen
  • Teixeira, Paula
  • Legaz, Jorge
  • García-Mariaca, Alexander
  • Peña, Begoña
  • Lisbona, Pilar
Decarbonizing the industry is key to achieving goals against climate change. The use of synthetic fuels and their regeneration is promoted, utilizing the industry's own emissions. However, implementing processes like carbon dioxide methanation for synthetic natural gas generation is a challenge in these industries due to the presence of impurities, such as sulfur. The objective of this study is to compare different supports and promoters for a nickel-based CO2 methanation catalyst at various levels of sulfur poisoning (0–1 wt%). Based on the results obtained, alumina emerged as the optimal catalyst support, showcasing superior catalytic performance compared to other tested materials across all examined reaction temperatures. Additionally, calcium (1 wt%) was identified as the most effective promoter, demonstrating the highest performance not only in unpoisoned catalysts but also when comparing samples with 1 wt% of sulfur poisoning. Additionally, the first sulfur-dependent kinetic model for methanation was developed, for the best Ni/Support and Ni/Promoter/Support catalyst. The kinetic model is valid for 0 – 1.0 wt% S poisoning, 1 bar, 200 – 450 °C, and 86 100 ml h−1 gcat−1 (error within ±5 %).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Performance and Emissions of Spark-Ignition Internal Combustion Engine Operating with Bioethanol–Gasoline Blends at High Altitudes Under Low- and High-Speed Conditions

  • García Mariaca, Alexander
  • Villalba, Jorge
  • Morillo Castaño, Rodrigo
  • Bailera, Manuel
Several countries have cities located at elevations above 2000 m. Consequently, the internal combustion engines (ICEs) that operate there do not achieve the desired performance and emissions under these atmospheric conditions. One approach to mitigate these effects and, at the same time, address climate change is the use of biofuel–fossil fuel blends. However, ICEs must operate under a wide range of rpm to meet varying workload demands, raising concerns that these fuel blends may not be fully effective in achieving the desired performance and emission outcomes under such conditions. To address this issue, a series of experimental tests were conducted at low and high rpm of a spark-ignition (SI) ICE fuelled with bioethanol–gasoline blends in the ratios of E10, E15, E20, E40, E60, E85, and E100. The tests were conducted at 2600 m above sea level (masl) under various engine loads. The E20 and E40 blends showed outstanding performance at 2700 rpm, achieving high brake power and low emissions of CO2 and HCs. At 4300 rpm, the E40 blend exhibited great performance because the engine produced high brake power and low emissions of CO and NOx. Based on these results, it can be concluded that bioethanol concentrations of between 20 and 40% in the blend effectively compensate for the reduced atmospheric oxygen at high altitudes, enhancing the combustion process in SI-ICEs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development, testing, performance analysis and modelling of a biochar-based catalyst for methanation reaction

  • Peña, Begoña
  • Bailera, Manuel
  • Legaz, Jorge
  • Barón, Cristian
  • Garlatti, Silvia
  • Zampilli, M.
  • Slopiecka, K.L.
  • Guilera, Jordi
  • Martín, Elena
  • Fantozzi, Francesco
  • Romeo, Luis M.
  • Lisbona, Pilar
Hydrogenation of CO2 to produce synthetic methane is a promising alternative to reduce the dependence on fossil fuels of high-temperature industrial processes hard to be electrified, contributing to mitigation of global warming. To reach enough conversion ratios and reasonable reactor sizes, the Sabatier reaction is usually performed via heterogeneous catalysis. Metallic catalysts, as nickel or ruthenium, are the most used supported over mesoporous alumina. The present work proposes and fully investigates for the first time the use of olive kernel biochar obtained from pyrolysis as support of methanation catalyst. The so-obtained biochar, with 530 m2/g specific surface area, is evaluated as a cost-effective and sustainable support. A Ni-based (10 wt%) catalyst was synthesized and tested in a fixed-bed methanation pilot plant. The obtained conversion ratios for gas hourly space velocity of 6000 h−1 were above 60 % for stoichiometric ratio and atmospheric pressure. A kinetic model was developed and validated with experimental measurements, finding discrepancies below 10 % between predictions and experiments. Even though the H2-TPR analyses revealed incomplete nickel reduction during the activation stage, the preliminary results are very promising as the achieved performance figures are similar, even higher, than that obtained in pressurized facilities and/or using Ni-Ce catalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pilot-plant experimental tests and kinetic model validation of Ru-based catalytic methanation: assessment of operating pressure and filler material on carbon conversion

  • Pascual, S.
  • Barón, C.
  • Katla, D.
  • Skorek-Osikowska, A.
  • Wecel, D.
  • Bailera, M.
  • Legaz, J.
  • Peña, B.
  • Lisbona, P.
The production of synthetic methane is crucial for the energy transition in hard-to-electrify industries. This study assesses the reactor filler (Al2O3 and SiC) and operating pressure (1 and 4 bar) effects on methane performance of a commercial Ru-Al2O3 catalyst. Three catalytic methanation parameters are tested over a wide range: temperatures (200–450 °C), gas hourly space velocities (8000–120,000 h−1), and H2/CO2 molar ratios (3.5–5.5). Experiments are conducted in two pilot plants located at the Universidad de Zaragoza and the Silesian University of Technology. Results demonstrate a high level of reproducibility between the two pilot plants, using Al2O3 filler at 1 bar. Additionally, a kinetic model is validated with experimental measurements, showing an error margin of ±5 % between the model and experimental data. Regarding the effects of operational pressure and reactor filler, the best carbon conversion results are obtained with Al2O3 filler at 4 bar (up to 98 %). For both reactors, a 5 % reduction in carbon conversion is observed at 450 °C for SiC filler. Methane selectivity remains above 99 % in all cases, except for SiC filler at 1 bar (90 %). However, SiC filler shows better thermal diffusion, facilitating operational control.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A comparison of carbon capture and biomass utilisation for decarbonising oxygen blast furnace ironmaking

  • Barón, Cristian
  • Bailera, Manuel
  • Perpiñán, Jorge
  • Peña, Begoña
The Iron and Steel industry stands as a significant industrial source of CO2 emissions, contributing 7% to the global CO2 emissions. Therefore, innovative methods for CO2 removal must be developed in the current path to heavy-industry decarbonization. This work presents and compares two low-carbon brownfield concepts, integrated in an existing steelmaking plant, which incorporates power-to-gas technology, top gas recycling and oxygen blast furnace. The first concept captures carbon via calcium looping and uses it as the source for the methanation plant to produce synthetic natural gas, which is injected in the blast furnace as reducing agent. The second concept is based on charcoal and syngas production through biomass pyrolysis. The former is pulverized and injected into the blast furnace, replacing part of the fossil coke used in the reference steelmaking plant. The latter is used as carbon source in the methanation stage, avoiding the carbon capture stage. Promising results are obtained for the concept which uses biomass as carbon source in the process, achieving a CO2 abatement cost of 64.5 €/tCO2. It is estimated that this cost could be reduced to 55.4 €/tCO2 by scale economy. Despite current economic challenges, the potential mid-term profitability, driven by the ongoing deployment of renewable energy, identifies the utilization of biomass as a solution for environmentally conscious steelmaking.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decarbonisation of lime kilns in ironmaking plants through Power to Gas

  • Bailera, Manuel
  • García-Mariaca, Alexander
  • Barón, Cristian
The iron and steel industry is one of the world's major carbon emitters. Various decarbonisation options are currently being explored: Asian producers mainly focus on carbon capture and carbon recycling in blast furnaces, while European producers favour the use of hydrogen in direct reduction processes. While the latter can eliminate CO2 emissions from iron ore reduction, producers still face CO2 emissions in other plant processes. Lime kilns, which are essential to iron production, cannot be fully decarbonized through hydrogen or direct electrification alone, as CO2 is inherently released during the calcination of limestone. Consequently, this paper analyses different decarbonisation pathways for lime kilns in ironmaking plants. These pathways utilize Power to Gas to establish carbon recycling concepts to avoid CO2 emissions. The integration of Power to Gas was modelled and simulated for the following lime kiln technologies: (1) Parallel flow regenerative shaft air-fuel lime kiln with amine scrubbing, (2) Parallel flow regenerative shaft oxy-fuel lime kiln, and (3) Parallel flow regenerative shaft oxy-fuel H2 lime kiln. The Power to Gas technology is powered by solar power. The PV solar field was modelled as being installed on the rooftops of a steelworks located in Austria. The total PV capacity that can currently be installed is 15 MWp. When considering additional roofs that require moderate rehabilitation or cleaning, the total PV capacity increases to 57 MWp. The results show that CO2 emissions can be reduced by 2% to 28% compared to the conventional air-blown lime kiln case. However, CO2 avoidance costs exceed 1,000 & euro;/tCO2, rendering the concept economically unfeasible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Techno-economic assessment of the sorption enhanced methanation: Levelized cost of methane, performance indicators and sensitivity analysis

  • Barón, C.
  • Gómez, L.
  • Martínez, I.
  • Bailera, M.
This work presents the first techno-economic assessment of sorption-enhanced methanation (SEM) based on TRL-3 experimental data, comparing it with conventional methanation (CM). Experimental tests fitted a kinetic model for reactor sizing in a 200 MWe plant. While SEM requires more catalyst (223.7 kg/MWe) than CM (70–90 kg/MWe), both systems show similar CAPEX (∼700-800 M€). The results highlight that SEM generates three times higher income due to superior product purity. Conventional methanation often faces economic losses when producing 95% CH4, as levelized costs (LCOM, 2.4 – 3.3 €/kg) exceed market prices (0.5 €/kg). Although CM can be profitable at 99% purity market, SEM achieves 99.9% CH4, accessing a premium market (12 €/kg) that guarantees profitability even in unfavorable hydrogen cost scenarios. Consequently, SEM emerges as a key technology to enhance the economic viability and maturity of innovative H2 production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Levelized cost of CO2 avoidance of an oxygen blast furnace with top gas recycling, biomass and on-site PV-powered methanation

  • Bailera, Manuel
  • García-Mariaca, Alexander
The decarbonization of the steel industry is critical for achieving global climate targets, as the conventional blast furnace-basic oxygen furnace (BF-BOF) route remains the dominant yet carbon-intensive production method. This study evaluates the practical and economic viability of integrating oxygen blast furnace (OBF) technology with top gas recycling (TGR), biomass pyrolysis, and power-to-gas (PtG) methanation. Using the JFE Steel plant in Chiba, Japan, as a case study, the research specifically examines the impact of relying exclusively on on-site rooftop photovoltaic (PV) systems to achieve electrical self-sufficiency for hydrogen production. Results show that while this integrated configuration theoretically offers emission reductions of 65–70% with unlimited renewable energy, the actual reduction is capped at 46.4% due to the 141 MWp capacity constraint of the available rooftop area. This mitigation is driven primarily by the transition to OBF-TGR mode (15.4 percentage points) and permanent carbon storage (29.2 percentage points), whereas the contributions from biomass and synthetic natural gas (SNG) are limited to 1.8 percentage points. Economic analysis indicates a total CAPEX of 1,320 M€, largely attributed to carbon capture and electrolysis infrastructure. However, the system proves commercially viable under current market trends; a green steel premium of 186 €/t or a combination of CO2 tax savings and lower premiums can achieve profitability. The Levelized Cost of CO2 Avoidance (LCCA) is calculated at 126 €/tCO2 when no green premium is applied. Ultimately, OBF-TGR integration represents a robust, financially feasible pathway for partial decarbonization and the certification of net-zero steel batches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental assessment of carbon mitigation retrofit pathways in integrated BF-BOF steel plants under electricity supply scenarios

  • Pascual, S.
  • Barón, C.
  • Bailera, M.
  • Peña, B.
  • Llera, E.
  • Lisbona, P.
Decarbonizing the iron and steel industry is critical for sustainable economic development. This study applies Life Cycle Assessment (LCA) to evaluate the environmental and energy implications of four novel carbon mitigation retrofit pathways compared to a conventional blast furnace-basic oxygen furnace (BF-BOF) plant (S0). These scenarios integrate retrofit technologies into existing infrastructure: amine-based carbon capture for storage (S1), Power-to-Gas technology for methanol synthesis (S2), a methanation process for internal gas substitution (S3), or direct hydrogen utilization via blast furnace injection (S4). Results indicate that S1 achieves the highest reduction in global warming potential (32%), constrained by the residual coke requirements of the blast furnace, while fossil resource scarcity decreases by 4% in S2 and S4. Although mineral resource scarcity remains stable across all scenarios, water consumption in electrolyzer-based systems triples, contributing 22% to the direct electrolyzer demand and 78% to the indirect raw materials and energy mix. Non-renewable energy use drops by 26% in scenarios with a high renewable energy integration (S2, S3 and S4). Sensitivity analysis reveals that electricity sourcing is the primary driver of environmental performance; a highly non-renewable European energy mix increases global warming potential, fossil resource scarcity, non-renewable cumulative energy demand and water consumption by up to 115%. Conversely, the 100% wind-powered alternative drastically reduces carbon emissions but slightly increases mineral resource scarcity (4.5%), due to infrastructure requirements. Overall, while Power-to-Gas and hydrogen integration significantly decouple existing steelmaking from fossil fuel dependence, these findings define the realistic boundaries of retrofit decarbonization, demonstrating that low-carbon electricity infrastructure is a strict prerequisite for circular carbon and hydrogen deployment in integrated BF-BOF systems.