Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Analysis of hidden node problem in LTE networks deployed in unlicensed spectrum

  • Campos, Pablo
  • Hernández-Solana, Ángela
  • Valdovinos-Bardají, Antonio
LTE operation in the unlicensed spectrum based on Licensed-Assisted Access (LAA) is being considered as an option to increase the capacity of 4G/5G wireless networks. This solution allows the eNodeB to contend with other nodes by accessing the shared medium and, through carrier aggregation (CA), to use both licensed and unlicensed bands to deliver best effort services. Nevertheless, the hidden node problem over shared medium access networks is an obstacle that must be addressed in order to reduce or avoid performance degradation problems. The metrics associated to LAA reflect the behavior of a node facing collisions. A better understanding of these metrics can help to identify nodes affected by hidden terminals, making it possible to take smart decisions about the continuity of a node on the unlicensed band, resulting in an improved network performance. In this paper, we first study the Channel Quality Indicator (CQI), Reference Signal Received Power (RSRP) and Reference Signal Received Quality (RSRQ) metrics on the context of LAA for a User Equipment (UE) that is facing different levels of interference. Then, a combination of the above metrics is used in order to develop an algorithm for collision detection. Finally, the performance of the algorithm is evaluated using a simulation tool under realistic channel conditions. The results show that is feasible to detect, with an adequate accuracy level, if a node is affected by collisions and subsequently if this node is located in hidden area. This is demonstrated with different levels of interference, realistic channel conditions and users in movement inside the hidden area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A dynamic access point allocation algorithm for dense wireless LANs using potential game

  • Raschellà, Alessandro
  • Bouhafs, Faycal
  • Mackay, Michael
  • Shi, Qi
  • Ortín, Jorge
  • Gállego, José Ramón
  • Canales, María
This work introduces an innovative Access Point (AP) allocation algorithm for dense Wi-Fi networks, which relies on a centralised potential game developed in a Software-Defined Wireless Networking (SDWN)-based framework. The proposed strategy optimises the allocation of the Wi-Fi stations (STAs) to APs and allows their dynamic reallocation according to possible changes in the capacity of the Wi-Fi network. This paper illustrates the design of the proposed framework based on SDWN and the implementation of the potential game-based algorithm, which includes two possible strategies. The main novel contribution of this work is that the algorithm allows us to efficiently reallocate the STAs by considering external interference, which can negatively affect the capacities of the APs handled by the SDWN controller. Moreover, the paper provides a detailed performance analysis of the algorithm, which describes the significant improvements achieved with respect to the state of the art. Specifically, the results have been compared against the AP selection considered by the IEEE 802.11 standards and another centralised algorithm dealing with the same problem, in terms of the data bit rate provided to the STAs, their dissatisfaction and Quality of Experience (QoE). Finally, the paper analyses the trade-off between efficient performance and the computational complexity achieved by the strategies implemented in the proposed algorithm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

PSM-DMO: power save mode and discontinuous BLE mesh operation

  • Hernández Solana, Á.
  • Pérez Díaz de Cerio, D.
  • García-Lozano, M.
  • Valdovinos, A.
  • Valenzuela, J. L.
The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

BMADS: BLE Mesh Asynchronous Dynamic Scanning

  • Perez-Diaz-De-Cerio, D.
  • Valenzuela, J.L.
  • Garcia-Lozano, M.
  • Hernandez-Solana, A.
  • Valdovinos, A.
The Bluetooth low-energy (BLE) mesh profile, currently standardized by the Bluetooth Special Interest Group (SIG), assumes that friend and relay nodes should be continuously scanning the channel ready to receive any incoming transmissions (TXs). This is very inefficient in terms of energy consumption. Hence, we present BMADS, an asynchronous dynamic scanning mechanism designed to reduce the overall energy consumption of the mesh network. BMADS is implemented as a new feature for the currently published BLE mesh specifications without modifying its core. This feature reduces the scanning cycles of the nodes, but still ensuring the reliability. To make this possible, BMADS sends a new control message sequence before transmitting the data. This sequence puts the nodes into continuous scan mode, preparing the network for data TX. The proposal can be used in BLE sensor networks that can tolerate a certain TX delay and require especially low-energy consumption. BMADS allows a theoretical reduction in the energy consumption of the relay nodes up to 98%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On Optimizing Network Function Placement for Multicast Group Call Service Provision in LTE IOPS Networks

  • Ortin Gracia, J.
  • Gallego Martínez, J.
  • Hernandez Solana A.
  • Canales M.
The adoption of commercial wireless technologies such as 4G/5G in public safety networks allows for new broadband services that could not be offered in this type of networks. Nevertheless, public safety networks are mission-critical systems that require the introduction of specific services in commercial wireless networks before this adoption. For instance, public safety networks require push-to-talk group communications or the possibility of operating in isolated mode, named by 3GPP the Isolated E-UTRAN Operation for Public Safety (IOPS). These requirements pose specific challenges that must be addressed, such as the placement of a local Evolved Packet Core (EPC) when a set of evolved Node B (eNB) must work in IOPS mode. In this paper, we analyze the implications of push-to-talk group communications and multicast in the local EPC placement problem for IOPS networks and propose an optimization algorithm that finds the best eNB where the local EPC should be co-located. Given the complexity of the problem, we also propose a heuristic algorithm to determine the optimal placement of the local EPC. Simulation results show the ability of our approach to adapt to different types of traffic with heterogeneous spatial distributions. © 2013 IEEE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Machine Learning for Hidden Nodes Detection in Unlicensed LTE Networks

  • Campos, Pablo
  • Hernández-Solana, Ángela
  • Valdovinos-Bardají, Antonio
This paper analyzes and evaluates the use of Machine Learning (ML) techniques as an alternative to heuristic methods to identify UEs in Licensed-Assisted Access (LAA) networks that are being affected by collisions from hidden nodes sources. The paper analyzes different models based on supervised ML methods to classify UEs into two possible classes: UEs affected by collisions and UEs free of collisions. To implement them, we employ a set of typical parameters of the LTE standard, e.g., Channel Quality Indicator (CQI), Reference Signal Received Quality (RSRQ) and number of Physical Resource Blocks (PRB). These parameters are fed into different supervised ML models which, once optimized, obtain the best models to predict when an UE is facing interference from hidden nodes in a dynamic channel environment. Results show that classification methods based on ML techniques are capable of predicting with a high level of accuracy when a UE is affected by collisions and, consequently, if this node is located in a hidden area. Nevertheless, and despite the growing interest in applying ML techniques in an increasing number of fields, we can conclude that, in this case, the performance of the ML approach is not necessarily better than heuristic methods. For instance, it does not outperform the Dynamic Collision Detection (DCD) previously presented by the authors. In addition, the ML algorithms exhibit a higher prediction time and computational complexity, with respect to those obtained with DCD algorithm. This should be considered a drawback in some LTE-Advanced and 5G wireless network scenarios that prioritize lower latencies. © 2022