Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Analysis of hidden node problem in LTE networks deployed in unlicensed spectrum

  • Campos, Pablo
  • Hernández-Solana, Ángela
  • Valdovinos-Bardají, Antonio
LTE operation in the unlicensed spectrum based on Licensed-Assisted Access (LAA) is being considered as an option to increase the capacity of 4G/5G wireless networks. This solution allows the eNodeB to contend with other nodes by accessing the shared medium and, through carrier aggregation (CA), to use both licensed and unlicensed bands to deliver best effort services. Nevertheless, the hidden node problem over shared medium access networks is an obstacle that must be addressed in order to reduce or avoid performance degradation problems. The metrics associated to LAA reflect the behavior of a node facing collisions. A better understanding of these metrics can help to identify nodes affected by hidden terminals, making it possible to take smart decisions about the continuity of a node on the unlicensed band, resulting in an improved network performance. In this paper, we first study the Channel Quality Indicator (CQI), Reference Signal Received Power (RSRP) and Reference Signal Received Quality (RSRQ) metrics on the context of LAA for a User Equipment (UE) that is facing different levels of interference. Then, a combination of the above metrics is used in order to develop an algorithm for collision detection. Finally, the performance of the algorithm is evaluated using a simulation tool under realistic channel conditions. The results show that is feasible to detect, with an adequate accuracy level, if a node is affected by collisions and subsequently if this node is located in hidden area. This is demonstrated with different levels of interference, realistic channel conditions and users in movement inside the hidden area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Oblivious Inspection: On the Confrontation between System Security and Data Privacy at Domain Boundaries

  • Sancho, J.
  • García, J.
  • Alesanco, Á.
In this work, we introduce the system boundary security vs. privacy dilemma, where border devices (e.g., firewall devices) require unencrypted data inspection to prevent data exfiltration or unauthorized data accesses, but unencrypted data inspection violates data privacy. To shortcut this problem, we present Oblivious Inspection, a novel approach based on garbled circuits to perform a stateful application-aware inspection of encrypted network traffic in a privacy-preserving way. We also showcase an inspection algorithm for Fast Healthcare Interoperability Resources (FHIR) standard compliant packets along with its performance results. The results point out the importance of the inspection function being aligned with the underlying garbled circuit protocol. In this line, mandatory encryption algorithms for TLS 1.3 have been analysed observing that packets encrypted using Chacha20 can be filtered up to 17 and 25 times faster compared with AES128-GCM and AES256-GCM, respectively. All together, this approach penalizes performance to align system security and data privacy, but it could be appropriate for those scenarios where this performance degradation can be justified by the sensibility of the involved data such as healthcare scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Attention to Wi-Fi Diversity: Resource Management in WLANs with Heterogeneous APs

  • Saldaña, J.
  • Ruiz-Mas, J.
  • Fernandez-Navajas, J.
  • Salazar Riaño, J.L.
  • Javaudin, J.P.
  • Bonnamy, J.M.
  • Le DIzes, M.
Many home networks integrate a small number (typically 2-4) of Wi-Fi Access Points (APs), with heterogeneous characteristics: different 802.11 variants, capabilities and security schemes. This paper proposes the consideration of these specific characteristics in order to improve the management of network resources. Three use cases are presented in order to showcase the potential benefits. By the use of a user-space AP, which works in coordination with a controller, the network is able to assign each connected station to the AP that best fits with its characteristics. The system also manages security, avoiding the need of adding specific elements for authentication, encryption or decryption. Extensions are proposed to an existing protocol that defines the communication between the AP and the controller, in order to communicate and store the specific characteristics of each AP and end device. This includes new association and handoff schemes that do not introduce any additional delay. The system has been implemented in a real environment, and a battery of tests has been run using three hardware platforms of different characteristics. The results show that handoffs between bands are possible, and estimate the processing delays, the Round-Trip Time and the handoff delay, which is small enough in order not to produce any significant disruption to the user (10-50 ms). Finally, the scenarios of interest have been replicated in a simulation environment, showing that significant benefits can be achieved if the specific characteristics of each AP and station are considered.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Building standardized and secure mobile health services based on social media

  • Trigo, J.D.
  • Rubio, Ó.J.
  • Martínez-Espronceda, M.
  • Alesanco, Á.
  • García, J.
  • Serrano-Arriezu, L.
Mobile devices and social media have been used to create empowering healthcare services. However, privacy and security concerns remain. Furthermore, the integration of interoperability biomedical standards is a strategic feature. Thus, the objective of this paper is to build enhanced healthcare services by merging all these components. Methodologically, the current mobile health telemonitoring architectures and their limitations are described, leading to the identification of new potentialities for a novel architecture. As a result, a standardized, secure/private, social-media-based mobile health architecture has been proposed and discussed. Additionally, a technical proof-of-concept (two Android applications) has been developed by selecting a social media (Twitter), a security envelope (open Pretty Good Privacy (openPGP)), a standard (Health Level 7 (HL7)) and an information-embedding algorithm (modifying the transparency channel, with two versions). The tests performed included a small-scale and a boundary scenario. For the former, two sizes of images were tested; for the latter, the two versions of the embedding algorithm were tested. The results show that the system is fast enough (less than 1 s) for most mHealth telemonitoring services. The architecture provides users with friendly (images shared via social media), straightforward (fast and inexpensive), secure/private and interoperable mHealth services.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Short message multichannel broadcast encryption

  • Salazar, José Luis
  • Saldaña, José
  • Fernández-Navajas, Julián
  • Ruiz-Mas, José
  • Azuara, Guillermo
The current use of short messages in wireless networks is highly growing. Messaging applications in mobile terminals with wireless coverage are very common in shopping, educational and transport centers, i.e. in centers of massive influx of people. This requires improving its efficiency, without losing security in such a hostile environment. In this paper, we propose an improvement in the use of the medium through a new multichannel broadcast encryption paradigm. Firstly, we rigorously demonstrate the security of our model that is characterized by two main issues: short messages and maintaining privacy in a shared frame. The improvements are obtained by reducing the transmitted overheads, saving bandwidth and airtime. To implement them, we improve the efficiency of communications, reducing the security headers to a single one, which will be shared by all receivers, while the payload is multiplexed via Chinese Remainder Theorem. In this way we reduce the packet length (less headers) and set the ratio of the encrypted text/plaintext equals to one, if we do not take into account padding and security headers. Although the model can be used by all types of networks, both wired and wireless, the improvement is more noticeable in the latter type. To make it remarkable, we quantify what this gain will consist of.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Authorizing Third-Party Applications Served through Messaging Platforms

  • Sancho Larraz, Jorge
  • García Moros, José
  • Alesanco Iglesias, Álvaro
The widespread adoption of smartphones and the new-generation wireless networks have changed the way that people interact among themselves and with their environment. The use of messaging platforms, such as WhatsApp, has become deeply ingrained in peoples’ lives, and many digital services have started to be delivered using these communication channels. In this work, we propose a new OAuth grant type to be used when the interaction between the resource owner and the client takes place through a messaging platform. This new grant type firstly allows the authorization server to be sure that no Man-in-the-Middle risk exists between the resource owner and the client before issuing an access token. Secondly, it allows the authorization server to interact with the resource owner through the same user-agent already being used to interact with the client, i.e., the messaging platform, which is expected to improve the overall user experience of the authorization process. To verify this assumption, we conducted a usability study in which subjects were required to perform the full authorization process using both the standard authorization code grant type (through a web-browser) and the new grant type defined in this work. They have also been required to fill in a small questionnaire including some demographic information and their impressions about both authorization flows. The results suggest that the proposed grant type eases the authorization process in most cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Validation of a Virtual Assistant for Improving Medication Adherence in Patients with Comorbid Type 2 Diabetes Mellitus and Depressive Disorder

  • Roca, S.
  • Lozano, M.L.
  • Garcia, J.
  • Alesanco, A.
Virtual assistants are programs that interact with users through text or voice messages simulating a human-based conversation. The development of healthcare virtual assistants that use messaging platforms is rapidly increasing. Still, there is a lack of validation of these assistants. In particular, this work aimed to validate the effectiveness of a healthcare virtual assistant, integrated within messaging platforms, with the aim of improving medication adherence in patients with comorbid type 2 diabetes mellitus and depressive disorder. For this purpose, a nine-month pilot study was designed and subsequently conducted. The virtual assistant reminds patients about their medication and provides healthcare professionals with the ability to monitor their patients. We analyzed the medication possession ratio (MPR), measured the level of glycosylated hemoglobin (HbA1c), and obtained the patient health questionnaire (PHQ-9) score in the patients before and after the study. We also conducted interviews with all participants. A total of thirteen patients and five nurses used and evaluated the proposed virtual assistant using the messaging platform Signal. Results showed that on average, the medication adherence improved. In the final interview, 69% of the patients agreed with the idea of continuing to use the virtual assistant after the study.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Automatic image characterization of psoriasis lesions

  • Martínez-Torres, J.
  • Silva Piñeiro, A.
  • Alesanco, Á.
  • Pérez-Rey, I.
  • García, J.
Psoriasis is a chronic skin disease that affects 125 million people worldwide and, par-ticularly, 2% of the Spanish population, characterized by the appearance of skin lesions due to a growth of the epidermis that is seven times larger than usual. Its diagnosis and monitoring are based on the use of methodologies for measuring the severity and extent of these spots, and this includes a large subjective component. For this reason, this paper presents an automatic method for characterizing psoriasis images that is divided into four parts: image preparation or pre-processing, feature extraction, classification of the lesions, and the obtaining of parameters. The methodology proposed in this work covers different digital-image processing techniques, namely, marker-based image delimitation, hair removal, nipple detection, lesion contour detection, areal-measurement-based lesion classification, as well as lesion characterization by means of red and white intensity. The results obtained were also endorsed by a professional dermatologist. This methodology provides professionals with a common software tool for monitoring the different existing typologies, which proved satisfactory in the cases analyzed for a set of 20 images corresponding to different types of lesions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Study on the Impacts of Slot Types and Training Data on Joint Natural Language Understanding in a Spanish Medication Management Assistant Scenario

  • Roca Mainer, S.
  • Rosset, S.
  • García Moros, J.
  • Alesanco Iglesias, Á.
This study evaluates the impacts of slot tagging and training data length on joint natural language understanding (NLU) models for medication management scenarios using chatbots in Spanish. In this study, we define the intents (purposes of the sentences) for medication management scenarios and two types of slot tags. For training the model, we generated four datasets, combining long/short sentences with long/short slots, while for testing, we collect the data from real interactions of users with a chatbot. For the comparative analysis, we chose six joint NLU models (SlotRefine, stack-propagation framework, SF-ID network, capsule-NLU, slot-gated modeling, and a joint SLU-LM model) from the literature. The results show that the best performance (with a sentence-level semantic accuracy of 68.6%, an F1-score of 76.4% for slot filling, and an accuracy of 79.3% for intent detection) is achieved using short sentences and short slots. Our results suggest that joint NLU models trained with short slots yield better results than those trained with long slots for the slot filling task. The results also indicate that short slots could be a better choice for the dialog system because of their simplicity. Importantly, the work demonstrates that the performance of the joint NLU models can be improved by selecting the correct slot configuration according to the usage scenario. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental Evaluation of Transmitted Signal Distortion Caused by Power Allocation in Inter-Cell Interference Coordination Techniques for LTE/LTE-A and 5G Systems

  • Hernandez-Solana, A.
  • García-Dúcar, P.
  • Valdovinos, A.
  • Garcia, J. E.
  • De Mingo, J.
  • Carro, P. L.
Error vector magnitude (EVM) and out-of-band emissions are key metrics for evaluating in-band and out-band distortions introduced by all potential non-idealities in the transmitters of wireless systems. As EVM is a measure of the quality of the modulated signal/symbols, LTE/LTE-A and 5G systems specify mandatory EVM requirements in transmission for each modulation scheme. This paper analyzes the influence of the mandatory satisfaction of EVM requirements on the design of radio resource management strategies (RRM) (link adaptation, inter-cell interference coordination), specifically in the downlink (DL). EVM depends on the non-idealities of the transmitter implementations, on the allocated power variations between the subcarriers and on the selected modulations. In the DL of LTE, link adaptation is usually executed by adaptive modulation and coding (AMC) instead of power control, but some flexibility in power allocation remains being used. LTE specifies some limits in the power dynamic ranges depending on the allocated modulation, which ensures the satisfaction of EVM requirements. However, the required recommendations concerning the allowed power dynamic range when inter-cell interference coordination (ICIC) and enhanced ICIC (eICIC) mechanisms (through power coordination) are out of specification, even though the EVM performance should be known to obtain the maximum benefit of these strategies. We perform an experimental characterization of the EVM in the DL under real and widely known ICIC implementation schemes. These studies demonstrate that an accurate analysis of EVM is required. It allows a better adjustment of the design parameters of these strategies, and also allows the redefinition of the main criteria to be considered in the implementation of the scheduler/link adaptation concerning the allocable modulation coding scheme (MCS) in each resource block. © 2013 IEEE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

PSM-DMO: power save mode and discontinuous BLE mesh operation

  • Hernández Solana, Á.
  • Pérez Díaz de Cerio, D.
  • García-Lozano, M.
  • Valdovinos, A.
  • Valenzuela, J. L.
The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the use of sniffers for spectrum occupancy measurements of Bluetooth low energy primary channels

  • Valenzuela-Pérez, A.
  • García-Lozano, M.
  • Valenzuela, J. L.
  • Pérez-Díaz-de-Cerio, D.
  • Hernández Solana, Á.
  • Valdovinos, A.
The methods usually employed to measure channel occupancy show limitations in the context of Bluetooth Low Energy (BLE) advertisements. We propose and analyze the use of BLE sniffers as light and portable low-cost spectrum occupancy meters to be used in scenarios where real time signal analyzers are not adequate. For the measurement technique to be successful, several low-level effects must be considered. The paper argues about on-air time, receiving blind times due to processing and intra system interference, buffer saturation and frequency anchoring. Hence, a compensation procedure based on collision rate estimation is proposed. Results with the refined method show that occupancies of 40% can be measured with an overestimation error whose percentile 95% is 5 percentage points. This is reduced to 1.9 points when the occupancy is 15%. The sniffers perform in real time and are shown to correctly track short term load variations. The strategy has been successfully used to characterize occupancy in highly variable and loaded scenarios such as subway platforms and a shopping mall. Values up to 25% have been observed, which implies a relevant packet error rate. Hence, the tool can be used to make agile audits and configure the parameters that control communication redundancy in new or existing networks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Speeding Up Bluetooth Mesh

  • Perez-Diaz-de-Cerio, D
  • Hernandez-Solana, A
  • Garcia-Lozano, M
  • Bardaji, AV
  • Valenzuela, JL
Bluetooth has constantly evolved from its cradle in 1997 to the last 5.2 version in 2020. With each update and amendment, it has gained in speed, range, and versatility. One of the latest introductions was the Bluetooth Mesh Profile (BMP) making it a technology suitable for a wide variety of applications. Nevertheless, BMP was designed to maintain the compatibility with Bluetooth version 4 devices already deployed in the market. This imposes some restrictions that place Bluetooth Mesh under other competing technologies like Zigbee or Thread in terms of throughput performance. In this paper we propose two mechanisms to overcome these limitations and take advantage of the new extended advertising capabilities introduced with Bluetooth 5. These mechanisms are presented as modifications to the current protocol stack to allow the transmission of larger data structures. Thus, it is possible to boost the throughput of Bluetooth Mesh making it suitable to more demanding applications like, for example, image transmission. The first proposal is designed as an adaptation layer to avoid modifying the standard in its current form. The second makes minimal changes to the frame structure at the different layers enabling the user to accommodate possible encapsulations (i.e., tunneling) without incurring IPv6-layer fragmentation. We have analyzed both solutions and compared them with the current BMP in terms of throughput, delay, and energy consumption for different channel conditions and network size. The results show that except for very small messages or poor channel conditions the proposals improve the throughput and delay of the current BMP.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Finding the sweet spot for frame aggregation in 802.11 WLANs

  • Saldaña J.
  • Topal O.
  • Ruiz-Mas J.
  • Fernandez-Navajas J.
This letter proposes an algorithm for the dynamic tuning of the maximum size of aggregated frames in 802.11 WLANs. Traffic flows with opposed requirements may coexist in these networks: traditional services as web browsing or file download that need high throughput, and services with real-time requirements that need low latency. The proposed algorithm allows the network manager to find an optimal balance (i.e. the ''sweet spot'' between throughput and latency: a ''delay budget'' can be assigned to real-time flows, with the objective of keeping the latency as close as possible to that budget, while penalizing the throughput of traditional services as little as possible. © 1997-2012 IEEE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

When Virtual Assistants Meet Teledermatology: Validation of a Virtual Assistant to Improve the Quality of Life of Psoriatic Patients

  • Roca, Surya
  • Almenara, Manuel
  • Gilaberte, Yolanda
  • Gracia Cazaña, Tamara
  • Morales Callaghan, Ana M.
  • Murciano, Daniel
  • García, José
  • Alesanco, Álvaro
Teledermatology has given dermatologists a tool to track patients’ responses to therapy using images. Virtual assistants, the programs that interact with users through text or voice messages, could be used in teledermatology to enhance the interaction of the tool with the patients and healthcare professionals and the overall impact of the medication and quality of life of patients. As such, this work aimed to investigate the effectiveness of using a virtual assistant for teledermatology and its impact on the quality of life. We conducted surveys with the participants and measured the usability of the system with the System Usability Scale (SUS). A total of 34 participants (30 patients diagnosed with moderate-severe psoriasis and 4 healthcare professionals) were included in the study. The measurement of the improvement of quality of life was done by analyzing Psoriasis Quality of Life (PSOLIFE) and Dermatology Life Quality Index (DLQI) questionnaires. The results showed that, on average, the quality of life improved (from 63.8 to 64.8 for PSOLIFE (with a p-value of 0.66 and an effect size of 0.06) and 4.4 to 2.8 for DLQI (with a p-value of 0.04 and an effect size of 0.31)). Patients also used the virtual assistant to do 52 medical consultations. Moreover, the usability is above average, with a SUS score of 70.1. As supported by MMAS-8 results, adherence also improved slightly. Our work demonstrates the improvement of the quality of life with the use of a virtual assistant in teledermatology, which could be attributed to the sense of security or peace of mind the patients get as they can contact their dermatologists directly within the virtual assistant-integrated system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of Machine Learning Techniques for Traffic Flow-Based Intrusion Detection

  • Rodríguez, María
  • Alesanco, Álvaro
  • Mehavilla, Lorena
  • García, José
Cybersecurity is one of the great challenges of today’s world. Rapid technological development has allowed society to prosper and improve the quality of life and the world is more dependent on new technologies. Managing security risks quickly and effectively, preventing, identifying, or mitigating them is a great challenge. The appearance of new attacks, and with more frequency, requires a constant update of threat detection methods. Traditional signature-based techniques are effective for known attacks, but they are not able to detect a new attack. For this reason, intrusion detection systems (IDS) that apply machine learning (ML) techniques represent an alternative that is gaining importance today. In this work, we have analyzed different machine learning techniques to determine which ones permit to obtain the best traffic classification results based on classification performance measurements and execution times, which is decisive for further real-time deployments. The CICIDS2017 dataset was selected in this work since it contains bidirectional traffic flows (derived from traffic captures) that include benign traffic and different types of up-to-date attacks. Each traffic flow is characterized by a set of connection-related attributes that can be used to model the traffic and distinguish between attacks and normal flows. The CICIDS2017 also contains the raw network traffic captures collected during the dataset creation in a packet-based format, thus permitting to extract the traffic flows from them. Various classification techniques have been evaluated using the Weka software: naive Bayes, logistic, multilayer perceptron, sequential minimal optimization, k-nearest neighbors, adaptive boosting, OneR, J48, PART, and random forest. As a general result, methods based on decision trees (PART, J48, and random forest) have turned out to be the most efficient with F1 values above 0.999 (average obtained in the complete dataset). Moreover, multiclass classification (distinguishing between different types of attack) and binary classification (distinguishing only between normal traffic and attack) have been compared, and the effect of reducing the number of attributes using the correlation-based feature selection (CFS) technique has been evaluated. By reducing the complexity in binary classification, better results can be obtained, and by selecting a reduced set of the most relevant attributes, less time is required (above 30% of decrease in the time required to test the model) at the cost of a small performance loss. The tree-based techniques with CFS attribute selection (six attributes selected) reached F1 values above 0.990 in the complete dataset. Finally, a conventional tool like Zeek has been used to process the raw traffic captures to identify the traffic flows and to obtain a reduced set of attributes from these flows. The classification results obtained using tree-based techniques (with 14 Zeek-based attributes) were also very high, with F1 above 0.997 (average obtained in the complete dataset) and low execution times (allowing several hundred thousand flows/s to be processed). These classification results obtained on the CICIDS2017 dataset allow us to affirm that the tree-based machine learning techniques may be appropriate in the flow-based intrusion detection problem and that algorithms, such as PART or J48, may offer a faster alternative solution to the RF technique.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

BMADS: BLE Mesh Asynchronous Dynamic Scanning

  • Perez-Diaz-De-Cerio, D.
  • Valenzuela, J.L.
  • Garcia-Lozano, M.
  • Hernandez-Solana, A.
  • Valdovinos, A.
The Bluetooth low-energy (BLE) mesh profile, currently standardized by the Bluetooth Special Interest Group (SIG), assumes that friend and relay nodes should be continuously scanning the channel ready to receive any incoming transmissions (TXs). This is very inefficient in terms of energy consumption. Hence, we present BMADS, an asynchronous dynamic scanning mechanism designed to reduce the overall energy consumption of the mesh network. BMADS is implemented as a new feature for the currently published BLE mesh specifications without modifying its core. This feature reduces the scanning cycles of the nodes, but still ensuring the reliability. To make this possible, BMADS sends a new control message sequence before transmitting the data. This sequence puts the nodes into continuous scan mode, preparing the network for data TX. The proposal can be used in BLE sensor networks that can tolerate a certain TX delay and require especially low-energy consumption. BMADS allows a theoretical reduction in the energy consumption of the relay nodes up to 98%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On Optimizing Network Function Placement for Multicast Group Call Service Provision in LTE IOPS Networks

  • Ortin Gracia, J.
  • Gallego Martínez, J.
  • Hernandez Solana A.
  • Canales M.
The adoption of commercial wireless technologies such as 4G/5G in public safety networks allows for new broadband services that could not be offered in this type of networks. Nevertheless, public safety networks are mission-critical systems that require the introduction of specific services in commercial wireless networks before this adoption. For instance, public safety networks require push-to-talk group communications or the possibility of operating in isolated mode, named by 3GPP the Isolated E-UTRAN Operation for Public Safety (IOPS). These requirements pose specific challenges that must be addressed, such as the placement of a local Evolved Packet Core (EPC) when a set of evolved Node B (eNB) must work in IOPS mode. In this paper, we analyze the implications of push-to-talk group communications and multicast in the local EPC placement problem for IOPS networks and propose an optimization algorithm that finds the best eNB where the local EPC should be co-located. Given the complexity of the problem, we also propose a heuristic algorithm to determine the optimal placement of the local EPC. Simulation results show the ability of our approach to adapt to different types of traffic with heterogeneous spatial distributions. © 2013 IEEE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Machine Learning for Hidden Nodes Detection in Unlicensed LTE Networks

  • Campos, Pablo
  • Hernández-Solana, Ángela
  • Valdovinos-Bardají, Antonio
This paper analyzes and evaluates the use of Machine Learning (ML) techniques as an alternative to heuristic methods to identify UEs in Licensed-Assisted Access (LAA) networks that are being affected by collisions from hidden nodes sources. The paper analyzes different models based on supervised ML methods to classify UEs into two possible classes: UEs affected by collisions and UEs free of collisions. To implement them, we employ a set of typical parameters of the LTE standard, e.g., Channel Quality Indicator (CQI), Reference Signal Received Quality (RSRQ) and number of Physical Resource Blocks (PRB). These parameters are fed into different supervised ML models which, once optimized, obtain the best models to predict when an UE is facing interference from hidden nodes in a dynamic channel environment. Results show that classification methods based on ML techniques are capable of predicting with a high level of accuracy when a UE is affected by collisions and, consequently, if this node is located in a hidden area. Nevertheless, and despite the growing interest in applying ML techniques in an increasing number of fields, we can conclude that, in this case, the performance of the ML approach is not necessarily better than heuristic methods. For instance, it does not outperform the Dynamic Collision Detection (DCD) previously presented by the authors. In addition, the ML algorithms exhibit a higher prediction time and computational complexity, with respect to those obtained with DCD algorithm. This should be considered a drawback in some LTE-Advanced and 5G wireless network scenarios that prioritize lower latencies. © 2022
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis of Scaling Policies for NFV Providing 5G/6G Reliability Levels With Fallible Servers

  • Ortin, Jorge
  • Serrano, Pablo
  • Garcia-Reinoso, Jaime
  • Banchs, Albert
The softwarization of mobile networks enables an efficient use of resources, by dynamically scaling and re-assigning them following variations in demand. Given that the activation of additional servers is not immediate, scaling up resources should anticipate traffic demands to prevent service disruption. At the same time, the activation of more servers than strictly necessary results in a waste of resources, and thus should be avoided. Given the stringent reliability requirements of 5G applications (up to 6 nines) and the fallible nature of servers, finding the right trade-off between efficiency and service disruption is particularly critical. In this paper, we analyze a generic auto-scaling mechanism for communication services, used to de(activate) servers in a cluster, based on occupation thresholds. We model the impact of the activation delay and the finite lifetime of the servers on performance, in terms of power consumption and failure probability. Based on this model, we derive an algorithm to optimally configure the thresholds. Simulation results confirm the accuracy of the model both under synthetic and realistic traffic patterns as well as the effectiveness of the configuration algorithm. We also provide some insights on the best strategy to support an energy-efficient highly-reliable service: deploying a few powerful and reliable machines versus deploying many machines, but less powerful and reliable.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Empirical evaluation of feature selection methods for machine learning based intrusion detection in IoT scenarios

  • García, José
  • Entrena, Jorge
  • Alesanco, Álvaro
This paper delves into the critical need for enhanced security measures within the Internet of Things (IoT) landscape due to inherent vulnerabilities in IoT devices, rendering them susceptible to various forms of cyber-attacks. The study emphasizes the importance of Intrusion Detection Systems (IDS) for continuous threat monitoring. The objective of this study was to conduct a comprehensive evaluation of feature selection (FS) methods using various machine learning (ML) techniques for classifying traffic flows within datasets containing intrusions in IoT environments. An extensive benchmark analysis of ML techniques and FS methods was performed, assessing feature selection under different approaches including Filter Feature Ranking (FFR), Filter-Feature Subset Selection (FSS), and Wrapper-based Feature Selection (WFS). FS becomes pivotal in handling vast IoT data by reducing irrelevant attributes, addressing the curse of dimensionality, enhancing model interpretability, and optimizing resources in devices with limited capacity. Key findings indicate the outperformance for traffic flows classification of certain tree-based algorithms, such as J48 or PART, against other machine learning techniques (naive Bayes, multi-layer perceptron, logistic, adaptive boosting or k-Nearest Neighbors), showcasing a good balance between performance and execution time. FS methods' advantages and drawbacks are discussed, highlighting the main differences in results obtained among different FS approaches. Filter-feature Subset Selection (FSS) approaches such as CFS could be more suitable than Filter Feature Ranking (FFR), which may select correlated attributes, or than Wrapper-based Feature Selection (WFS) methods, which may tailor attribute subsets for specific ML techniques and have lengthy execution times. In any case, reducing attributes via FS has allowed optimization of classification without compromising accuracy. In this study, F1 score classification results above 0.99, along with a reduction of over 60% in the number of attributes, have been achieved in most experiments conducted across four datasets, both in binary and multiclass modes. This work emphasizes the importance of a balanced attribute selection process, taking into account threat detection capabilities and computational complexity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modeling the Coexistence of LECIM ALOHA PCA and CSMA/CA in Unslotted IEEE 802.15.4 Networks

  • Ortín, Jorge
  • Gállego, José Ramón
  • Canales, María
Wireless sensor networks are pivotal in critical infrastructure monitoring due to their cost-effectiveness and real-time data processing capabilities. The IEEE 802.15.4 standard, especially the Low Energy Critical Infrastructure Monitoring (LECIM) portions, plays a crucial role in enhancing monitoring efficiency of critical infrastructure. LECIM introduces Priority Channel Access (PCA) for traffic prioritization, particularly beneficial for critical information transmission. This paper investigates the coexistence of CSMA/CA-based nodes transmitting non-priority data and LECIM ALOHA PCA nodes handling critical information in unslotted IEEE 802.15.4 networks. We propose a novel theoretical framework to evaluate the performance of a heterogeneous LECIM network, where some nodes use the CSMA/CA channel access method while others use LECIM ALOHA PCA. The performance is measured in terms of reliability, delay and power consumption. Validation of the theoretical framework is conducted using a system-level simulator.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Novel Dataset for Early Cardiovascular Risk Detection in School Children Using Machine Learning

  • Olivera Solís, Rafael Alejandro
  • González Rodríguez, Emilio Francisco
  • Castañeda Sheissa, Roberto
  • Lorenzo-Ginori, Juan Valentín
  • García, José
This study introduces the PROCDEC dataset, a novel collection of 1140 cases with 30 cardiovascular risk factors gathered over a 10-year period from school children in Santa Clara, Cuba. The dataset was curated with input from medical experts in pediatric cardiology, endocrinology, general medicine, and clinical laboratory, ensuring its clinical relevance. We conducted a rigorous performance evaluation of 10 machine learning (ML) algorithms to classify cardiovascular risk into two categories: at risk and not at risk. The models were assessed using a stratified k-fold cross-validation approach to enhance the reliability of the findings. Among the evaluated models—Bayes Net, Naive Bayes, SMO, K-Nearest Neighbors (KNN), Logistic Regression, AdaBoost, Multilayer Perceptron (MLP), J48, Logistic Model Tree (LMT), and Random Forest (RF)—the best-performing classifiers (MLP, LMT, J48 and Logistic Regression) achieved F1-score values exceeding 0.83, indicating strong predictive capability. To improve interpretability, we employed feature selection techniques to rank the most influential risk factors. Key contributors to classification performance included hypertension, hyperreactivity, body mass index (BMI), uric acid, cholesterol, parental hypertension, and sibling dyslipidemia. These findings align with established clinical knowledge and reinforce the potential of ML models for pediatric cardiovascular risk assessment. Unlike previous studies, our research not only evaluates multiple ML techniques but also emphasizes their clinical applicability and interpretability, which are critical for real-world implementation. Future work will focus on validating these models with external datasets and integrating them into decision-support systems for early risk detection.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Deep Learning Approach for Multiclass Attack Classification in IoT and IIoT Networks Using Convolutional Neural Networks

  • Seyedkolaei, Ali Abdi
  • Mahmoudi, Fatemeh
  • García, José
The rapid expansion of the Internet of Things (IoT) and industrial Internet of Things (IIoT) ecosystems has introduced new security challenges, particularly the need for robust intrusion detection systems (IDSs) capable of adapting to increasingly sophisticated cyberattacks. In this study, we propose a novel intrusion detection approach based on convolutional neural networks (CNNs), designed to automatically extract spatial patterns from network traffic data. Leveraging the DNN-EdgeIIoT dataset, which includes a wide range of attack types and traffic scenarios, we conduct comprehensive experiments to compare the CNN-based model against traditional machine learning techniques, including decision trees, random forests, support vector machines, and K-nearest neighbors. Our approach consistently outperforms baseline models across multiple performance metrics—such as F1 score, precision, and recall—in both binary (benign vs. attack) and multiclass settings (6-class and 15-class classification). The CNN model achieves F1 scores of 1.00, 0.994, and 0.946, respectively, highlighting its strong generalization ability across diverse attack categories. These results demonstrate the effectiveness of deep-learning-based IDSs in enhancing the security posture of IoT and IIoT infrastructures, paving the way for intelligent, adaptive, and scalable threat detection systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An edge-cloud approach for video surveillance in public transport vehicles

  • Quintana, I
  • Sequeira, L
  • Ruiz-Mas, J.
A Video Surveillance System (VSS) is of primary importance in public transport hubs such as airports, train or bus stations but also inside the vehicle itself. In this paper, we present a heuristic architecture model for on-board video surveillance system based on Internet of Video Things (IoVT) devices which addresses the need for delivering smart video surveillance in public transport vehicles (e.g., buses) minimizing the impact on network performance. A proof-of-concept was implemented using a public Cloud Service Provider (CSP) and two Raspberry Pi as edge computing nodes. On the edge nodes, a Machine Learning (ML) application was deployed along with a network-efficient video streaming system. On the other hand, laboratory tests are included to understand the network traffic dynamic, furthermore results are enhanced with a set of simulations in order to analyze the performance of a video streaming application and 6 different congestion control algorithms in terms of packet loss and delay.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluating large language models effectiveness for flow-based intrusion detection: a comparative study with ML and DL baselines

  • Mehavilla, Lorena
  • Rodríguez, María
  • García, José
  • Alesanco, Álvaro
This paper presents the first systematic benchmark evaluating Large Language Models (LLMs), specifically GPT-2, GPT-Neo-125M, and LLaMA-3.2-1B, as standalone classifiers for intrusion detection, covering both binary and multiclass classification tasks, using structured Zeek logs derived from the CIC IoT 2023 dataset. We compare their performance against established and widely used Machine Learning (XGBoost, Random Forest, Decision Tree) and Deep Learning models (MLP, GRU, LeNet-5) across key evaluation metrics: detection effectiveness (precision, recall and F1-score), inference speed, and resource consumption. All models are consistently trained and rigorously evaluated on the CIC IoT 2023 dataset, ensuring fair, reproducible, and transparent comparisons. Our findings indicate that while LLMs achieve strong F1-score exceeding 95%, and do not fully utilize available GPU resources, they still do not outperform top-performing ML models. Notably XGBoost achieves a higher F1-score of 96.96%, using only 4% of the available CPU. These results emphasize the practical trade-offs between detection capability, inference efficiency, and hardware requirements when applying LLMs in flow-based IDS contexts, particularly in resource-constrained environments such as IoT or edge deployments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unveiling user activities on instant messaging platforms: A study of activity fingerprinting through traffic analysis and machine learning techniques

  • Mehavilla, Lorena
  • García, José
  • Alesanco, Álvaro
Encrypted instant messaging (IM) traffic conceals message content but still exposes communication patterns that can reveal user behaviour. This paper presents a unified framework for inferring user activities across multiple IM platforms by analysing encrypted traffic using machine learning techniques. The proposed approach integrates empirical traffic characterisation, transaction-centric segmentation, and lightweight classifiers to detect user actions, such as sending or receiving text and multimedia messages, in real time. Using Zeek as the core analysis engine, the framework performs packet inspection, transaction segmentation, connection classification, and feature extraction. The framework was evaluated on traffic from nine major IM platforms (Discord, Facebook Messenger, Instagram, Snapchat, Microsoft Teams, Telegram, WeChat, WhatsApp, and X), achieving F1 scores ranging from 0.62 for X up to 0.98 for WhatsApp. Unlike prior studies limited to single applications or synthetic datasets, our work employs realistic, user-driven traffic and explicitly distinguishes message type and direction, improving comparison and cross-platform generalization. Beyond methodological advancements, this study exposes privacy risks inherent in encrypted communication and outlines ethical safeguards and countermeasures to mitigate activity fingerprinting. The findings demonstrate that accurate, real-time inference of encrypted messaging activities is feasible under responsible, consent-based conditions, offering valuable insights for network forensics and privacy-aware communication design.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Deception-Based Access Control Mechanism for Protecting PLCs from ModbusTCP Brute-Force Attacks in IIoT Environments

  • AbdulJawad, Mohammad
  • Masoud, Mohammad Z.
  • Álesanco, Álvaro
  • García, José
Industrial control systems (ICSs) increasingly rely on legacy communication protocols such as ModbusTCP, which lack built-in security mechanisms and remain widely exposed to network-based attacks. This paper investigates the security limitations of authentication mechanisms in ModbusTCP-enabled programmable logic controllers (PLCs) and demonstrates how plaintext credential transmission and limited connection handling capabilities can be exploited to perform brute-force and denial-of-service (DoS) attacks. An experimental testbed based on two industrial Delta PLC families (DVP-13SE and DVP-311SV3) was developed to systematically evaluate these vulnerabilities under realistic conditions. The results show that authentication credentials can be easily captured through network sniffing, while the PLC communication stack supports a maximum of 16 concurrent connections and can process up to approximately 8600 Modbus operations per second, making it susceptible to resource exhaustion and performance degradation under distributed attack scenarios. To address these limitations, this paper proposes a lightweight deception-based protection mechanism, termed the PLC misleading algorithm (PMA), which is implemented directly within the PLC ladder logic. Unlike traditional network-level defenses, PMA operates at the device level and dynamically misleads attackers by generating controlled randomized responses while preserving consistent behavior for legitimate clients. Experimental results demonstrate that PMA significantly mitigates brute-force effectiveness by preventing reliable password extraction while introducing minimal overhead (2.2% memory usage) and maintaining acceptable communication latency. Additionally, the proposed approach significantly reduces observable attack traffic, with only 0.246 Modbus operations per second observed during the attack phase, thereby limiting the effectiveness of automated exploitation tools. These findings highlight the potential of in-device deception mechanisms as a practical and deployable security layer for legacy industrial systems, and provide new insights into the resilience of PLC-based infrastructures against network-level attacks. This work bridges the gap between lightweight PLC-level protections and the growing need for robust cybersecurity mechanisms in industrial IoT environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimized placement of security controllers for enhancing intrusion detection and resilience in software-defined IoT networks

  • Abdi Seyedkolaei, Ali
  • García, José
This study investigates the optimal placement of security controllers in Software-Defined IoT (SD-IoT) networks to enhance intrusion detection and improve network resilience against cyber threats. In SD-IoT environments, the strategic positioning of security controllers plays a vital role in monitoring malicious activity and responding to attacks effectively. However, inefficient controller placement can increase detection time, heighten vulnerability, and degrade overall network performance. To address this challenge, we propose multi-objective optimization approach based on the Non-Dominated Sorting Genetic Algorithm II (NSGA-II) to determine the optimal number and locations of security controllers. The proposed method simultaneously considers network topology, resource constraints, and the characteristics of potential attack patterns to minimize intrusion detection delay, reduce the impact of threats on data transmission, and enhance load distribution. For evaluation, simulations were conducted using topologies from the Internet Topology Zoo. The proposed method was compared against other existing methods, such as Random Placement, Greedy Algorithm and Iterated Local Search strategies, in terms of controllers required, security, latency, load balancing, and deployment cost. Results demonstrate that our approach significantly outperforms other methods, for instance achieving approximately a 60% reduction in deployment cost in the large-scale Cogentco topology. These findings highlight the effectiveness of integrating NSGA-II for strategic controller placement to strengthen security and operational efficiency in SD-IoT networks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A rule-based label harmonization framework for cross-dataset IoT intrusion detection

  • Rodríguez, María
  • Mehavilla, Lorena
  • Alesanco, Álvaro
  • García, José
Machine learning (ML) has become a dominant approach for intrusion detection in Internet of Things (IoT) networks, yet most studies evaluate models within a single dataset, overlooking generalization across heterogeneous environments. This work revisits that challenge through a systematic cross-dataset evaluation using three public datasets: CIC-IoT-2023, IoT-23, and IoTID20. When trained and tested within the same dataset, models achieved near-perfect accuracy (average F1 > 0.99); however, performance degraded sharply when models trained on one dataset were tested on a different one (average F1 < 0.50 except for Multi-Layer Perceptron). Combining multiple datasets into a unified training corpus restored high accuracy (average F1 > 0.99) however, these results must be interpreted with caution, as consistent labeling remains essential for reliable cross-dataset evaluation. These findings highlight the fragility of current Intrusion Detection System (IDS) models to domain shifts and the promise of dataset fusion for enhancing generalization. We introduce a reproducible framework that harmonizes heterogeneous datasets through rule-based labeling grounded in Zeek’s standardized flow features and MITRE ATT&CK / CAPEC semantics. This replaces manual relabeling with a systematic, extensible procedure, enabling diverse traffic to be transformed into interoperable annotations. Labels are assigned by behavioral characteristics rather than dataset-specific categories, allowing discovery of previously unlabeled malicious activity. A proof of concept with three smart-home environments demonstrated the framework: models maintained near-perfect performance when trained on individual or unified datasets (average F1 > 0.99). Overall, unified rule-based labeling enables scalable dataset reuse, improves cross-dataset generalization, and fosters interpretable, data-centric ML for IoT intrusion detection.