Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unsticking the Wi-Fi Client: Smarter decisions using a software defined wireless solution

  • Saldaña, J.
  • Munilla, R.
  • Eryigit, S.
  • Topal, O.
  • Ruiz-Mas, J.
  • Fernandez-Navajas, J.
  • Sequeira, L.
This paper presents a novel software-defined wireless network architecture that integrates coordination mechanisms to enhance the capabilities of a set of central managed Wi-Fi access points (APs). The global architecture is presented in detail, where the handoff mechanism is integrated with a set of active and passive monitoring tools and other functionalities, resulting in a solution that is able to provide smart functionalities using low-cost commercial APs. The framework includes a central controller that has all the information available, and is therefore able to make smart decisions about the assignment of clients to APs. This avoids the problem of the "sticky client" that remains connected to the original AP it is associated with, rather than moving to a nearby AP, which would be a better choice. Two different test scenarios are used to compare a proactive and a reactive handoff mechanism in realistic conditions, with different walking speeds. The results illustrate the advantage of the proactive handoff, as it is more scalable and allows a better integration with other functionalities such as load balancing. The delay incurred by the handoff between APs in different channels is measured with three wireless devices, using five values for the inter-beacon time, proving that fast and seamless handoffs are possible in the scenario. The paper shows that these advanced functionalities, usually available in proprietary solutions, can also be achieved using off-the-shelf equipment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Validation of the apple watch for heart rate variability measurements during relax and mental stress in healthy subjects

  • Hernando, D.
  • Roca, S.
  • Sancho, J.
  • Alesanco, Á.
  • Bailón, R.
Heart rate variability (HRV) analysis is a noninvasive tool widely used to assess autonomic nervous system state. The market for wearable devices that measure the heart rate has grown exponentially, as well as their potential use for healthcare and wellbeing applications. Still, there is a lack of validation of these devices. In particular, this work aims to validate the Apple Watch in terms of HRV derived from the RR interval series provided by the device, both in temporal (HRM (mean heart rate), SDNN, RMSSD and pNN50) and frequency (low and high frequency powers, LF and HF) domain. For this purpose, a database of 20 healthy volunteers subjected to relax and a mild cognitive stress was used. First, RR interval series provided by Apple Watch were validated using as reference the RR interval series provided by a Polar H7 using Bland-Altman plots and reliability and agreement coefficients. Then, HRV parameters derived from both RR interval series were compared and their ability to identify autonomic nervous system (ANS) response to mild cognitive stress was studied. Apple Watch measurements presented very good reliability and agreement (>0.9). RR interval series provided by Apple Watch contain gaps due to missing RR interval values (on average, 5 gaps per recording, lasting 6.5 s per gap). Temporal HRV indices were not significantly affected by the gaps. However, they produced a significant decrease in the LF and HF power. Despite these differences, HRV indices derived from the Apple Watch RR interval series were able to reflect changes induced by a mild mental stress, showing a significant decrease of HF power as well as RMSSD in stress with respect to relax, suggesting the potential use of HRV measurements derived from Apple Watch for stress monitoring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Anti-Collision Adaptations of BLE Active Scanning for Dense IoT Tracking Applications

  • Hernandez-Solana, A.
  • Perez-Diaz-De-Cerio, D.
  • Valdovinos, A.
  • Valenzuela, J.L.
Bluetooth low energy (BLE) is one of most promising technologies to enable the Internet-of-Things (IoT) paradigm. The BLE neighbor discovery process (NDP) based on active scanning may be the core of multiple IoT applications in which a large and varying number of users/devices/tags must be detected in a short period of time. Minimizing the discovery latency and maximizing the number of devices that can be discovered in a limited time are challenging issues due to collisions between frames sent by advertisers and scanners. The mechanism for resolution of collisions between scanners has a great impact on the achieved performance, but backoff in NDP has been poorly studied so far. This paper includes a detailed analysis of backoff in NDP, identifies and studies the factors involved in the process, reveals the limitations and problems presented by the algorithm suggested by the specifications and proposes simple and practical adaptations on scanner functionality. They are easily compatible with the current definitions of the standard, which together with a new proposal for the backoff scheme, may significantly improve the discovery latencies and, thus, the probability of discovering a large number of devices in high density scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

IoTsafe, Decoupling Security from Applications for a Safer IoT

  • De Hoz Diego, J.D.
  • Saldaña, J.
  • Fernandez-Navajas, J.
  • Ruiz-Mas, J.
The use of robust security solutions is a must for the Internet of Things (IoT) devices and their applications: regulators in different countries are creating frameworks for certifying those devices with an acceptable security level. However, even for already certified devices, security protocols have to be updated when a breach is found or a certain version becomes obsolete. Many approaches for securing IoT applications are nowadays based on the integration of a security layer [e.g., using transport layer security, (TLS)], but this may result in difficulties when upgrading the security algorithms, as the whole application has to be updated. This fact may shorten the life of IoT devices. As a way to overcome these difficulties, this paper presents IoTsafe, a novel approach relying on secure socket shell (SSH), a feasible alternative to secure communications in IoT applications based on hypertext transfer protocol (HTTP and HTTP/2). In order to illustrate its advantages, a comparison between the traditional approach (HTTP with TLS) and our scheme (HTTP with SSH) is performed over low-power wireless personal area networks (6loWPAN) through 802.15.4 interfaces. The results show that the proposed approach not only provides a more robust and easy-To-update solution, but it also brings an improvement to the overall performance in terms of goodput and energy consumption. Core server stress tests are also presented, and the server performance is also analyzed in terms of RAM consumption and escalation strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Wi-5: A Programming Architecture for Unlicensed Frequency Bands

  • Bouhafs, F.
  • MacKay, M.
  • Raschellà, A.
  • Shi, Q.
  • Den Hartog, F.
  • Saldaña, J.
  • Munilla, R.
  • Ruiz-Mas, J.
  • Fernández-Navajas, J.
  • Almodovar, J.
  • Van Adrichem, N.
We present Wi-5, a spectrum programming architecture for radio resource management in unlicensed frequency bands. It introduces a spectrum control plane that offers fine grained allocation of radio resources, flexible configuration of radio and wireless networking parameters, and continuous monitoring of the wireless network status. These features, along with the centralized nature of this architecture, can effectively address spectrum congestion which often occurs in unlicensed frequency bands. To demonstrate Wi-5''s capabilities, we show results obtained from emulating various use case scenarios on our open source proof-of-concept.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-cost test measurement setup for real IoT BLE sensor device characterization

  • Perez-Diaz-de-Cerio, D.
  • Hernández-Solana, Á.
  • Valdovinos, A.
  • Olmos, J.
  • Valenzuela, J.L.
The methodology presented in this paper aims to characterize impairments shown by real devices which are usually neglected on standardized tests but that become very important in massive IoT scenarios. For instance, we have measured that real BLE scanners are not able to scan continuously even though they are configured to do so. Besides, we have also found and demonstrated that some manufacturers seem not to apply any backoff mechanism although it is mandatory. These two unexpected behaviors have a significant impact on the performance of massive wireless sensor networks based on BLE. So, it becomes necessary to characterize these and other impairments. The proposed tests are based on device current consumption measurements and their association with the information obtained from upper layers. We describe a new low-cost generic measurement setup and provide all the necessary data (configuration parameters, scripts, etc.) for applying the proposed methodology. As an example, we use it to profile the behavior of Bluetooth Low Energy devices. Furthermore, the proposed setup can also inspire researchers to characterize other wireless technology devices, like Wi-Fi, Zigbee, LoRa, etc.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microservice chatbot architecture for chronic patient support

  • Roca, Surya
  • Sancho, Jorge
  • García, José
  • Alesanco, Álvaro
Chatbots are able to provide support to patients suffering from very different conditions. Patients with chronic diseases or comorbidities could benefit the most from chatbots which can keep track of their condition, provide specific information, encourage adherence to medication, etc. To perform these functions, chatbots need a suitable underlying software architecture. In this paper, we introduce a chatbot architecture for chronic patient support grounded on three pillars: scalability by means of microservices, standard data sharing models through HL7 FHIR and standard conversation modeling using AIML. We also propose an innovative automation mechanism to convert FHIR resources into AIML files, thus facilitating the interaction and data gathering of medical and personal information that ends up in patient health records. To align the way people interact with each other using messaging platforms with the chatbot architecture, we propose these very same channels for the chatbot-patient interaction, paying special attention to security and privacy issues. Finally, we present a monitored-data study performed in different chronic diseases, and we present a prototype implementation tailored for one specific chronic disease, psoriasis, showing how this new architecture allows the change, the addition or the improvement of different parts of the chatbot in a dynamic and flexible way, providing a substantial improvement in the development of chatbots used as virtual assistants for chronic patients.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A dynamic access point allocation algorithm for dense wireless LANs using potential game

  • Raschellà, Alessandro
  • Bouhafs, Faycal
  • Mackay, Michael
  • Shi, Qi
  • Ortín, Jorge
  • Gállego, José Ramón
  • Canales, María
This work introduces an innovative Access Point (AP) allocation algorithm for dense Wi-Fi networks, which relies on a centralised potential game developed in a Software-Defined Wireless Networking (SDWN)-based framework. The proposed strategy optimises the allocation of the Wi-Fi stations (STAs) to APs and allows their dynamic reallocation according to possible changes in the capacity of the Wi-Fi network. This paper illustrates the design of the proposed framework based on SDWN and the implementation of the potential game-based algorithm, which includes two possible strategies. The main novel contribution of this work is that the algorithm allows us to efficiently reallocate the STAs by considering external interference, which can negatively affect the capacities of the APs handled by the SDWN controller. Moreover, the paper provides a detailed performance analysis of the algorithm, which describes the significant improvements achieved with respect to the state of the art. Specifically, the results have been compared against the AP selection considered by the IEEE 802.11 standards and another centralised algorithm dealing with the same problem, in terms of the data bit rate provided to the STAs, their dissatisfaction and Quality of Experience (QoE). Finally, the paper analyses the trade-off between efficient performance and the computational complexity achieved by the strategies implemented in the proposed algorithm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Triple-Band Concurrent Reconfigurable Matching Network

  • De Mingo, J
  • Carro, PL
  • Garcia-Ducar, P
  • Valdovinos, A
Reconfigurable Matching Networks (RMN) have found a wide range of applications, such as antenna impedance matching (Antenna Tuning Units -ATU-), the design of reconfigurable power amplifiers, applications in Magnetic Resonance Imaging (MRI), adjustable low noise amplifier design, etc. In this paper, we propose the experimental design and verification of a reconfigurable impedance synthesis network that can simultaneously work in three different bands and is completely independent so that the impedance variations in a frequency band are approximately transparent to the rest. The variable elements used in this paper are varactors. To verify its operation, it is applied to a process of matching a laser modulator in three different frequency bands for C-RAN (Cloud Radio Access Networks) applications. Experimental results demonstrate, as expected, that losses may depend on the state in which they are driven. Consequently, a state that can guarantee a good match could also imply greater losses, leading to a certain trade-off. The application of genetic algorithms in this context points out that it may be convenient to optimize the insertion losses of the complete chain instead of the return losses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Augmenting LoRaWAN Performance With Listen Before Talk

  • Ortín, Jorge
  • Cesana, Matteo
  • Redondi, Alessandro
Standard LoRaWANs leverage pure ALOHA at the medium access control layer, which is proved to be a performance bottleneck as the network size scales up. Stimulated by this fact, this paper studies the applicability and the performance of listen before talk (LBT) medium access schemes in the context of LoRaWANs. We consider two different implementations of LBT: physical layer LBT based on energy detection only and MAC layer LBT based on layer 2 frame decoding, and we propose a Markovian framework to evaluate the performance of LoRaWANs under such setting in terms of data extraction rate and average delay experienced by transmitted uplink messages. The proposed framework is also leveraged to assess the performance of "mixed" LoRaWAN scenarios, where some devices access the channel according to the standard-compliant ALOHA protocol, while other devices transmit according to LBT.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decoupling Security From Applications in CoAP-Based IoT Devices

  • De Hoz Diego, Jorge David
  • Saldaña, José
  • Fernández-Navajas, Julián
  • Ruiz-Mas, José
The complex and ever-changing Internet of Things (IoT) domain could benefit from standardization and a higher degree of autonomy between different layers: standard approaches defining the relationship between security communication software functionalities, hardware, and applications will allow a more efficient, flexible, and secure communication. To this end, techniques in which the security of IoT devices is decoupled from the applications they run can provide significant benefits and enable the development of new standardization strategies. This article presents a study of the benefits provided by IoTsafe, a security decoupling approach when used in combination with the constrained application protocol (CoAP). Whereas previous work relied on HTTP/HTTP2 protocols, the present article is focused on the analysis of the feasibility of IoTsafe in more constrained devices in channels with high interference levels. The benefits of this technique are illustrated by means of a battery of tests to evaluate the impact of this scheme. The results show no performance penalty (taking CoAP with security as a baseline) in lossless channels, even when an overhead increment of 38 is borne. Furthermore, in lossier channels, a transfer time reduction of 36 is achieved, a figure that increases significantly if traffic compression is enabled.