Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemistry below graphene: Decoupling epitaxial graphene from metals by potential-controlled electrochemical oxidation

  • Palacio, Irene
  • Otero, Gonzalo
  • Alonso, Concepción
  • Martínez, José I.
  • López-Elvira, Elena
  • Ochando, Isabel M.
  • Salavagione, Horacio J.
  • López, María Francisca
  • García-Hernández, Mar
  • Méndez, J.
  • Ellis, Gary James
  • Martín-Gago, José A.
While high-quality defect-free epitaxial graphene can be efficiently grown on metal substrates, strong interaction with the supporting metal quenches its outstanding properties. Thus, protocols to transfer graphene to insulating substrates are obligatory, and these often severely impair graphene properties by the introduction of structural or chemical defects. Here we describe a simple and easily scalable general methodology to structurally and electronically decouple epitaxial graphene from Pt(111) and Ir(111) metal surfaces. A multi-technique characterization combined with ab-initio calculations was employed to fully explain the different steps involved in the process. It was shown that, after a controlled electrochemical oxidation process, a single-atom thick metal-hydroxide layer intercalates below graphene, decoupling it from the metal substrate. This decoupling process occurs without disrupting the morphology and electronic properties of graphene. The results suggest that suitably optimized electrochemical treatments may provide effective alternatives to current transfer protocols for graphene and other 2D materials on diverse metal surfaces., We acknowledge funding from the Spanish MINECO (Grants MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2013- 47898-C2-2-R and MAT2017-85089-C2-1-R), the EU via the ERCSynergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), the innovation program under grant agreement No. 696656 (GrapheneCore1- Graphene-based disruptive technologies), the Comunidad Autónoma de Madrid (CAM) MAD2D-CM Program (S2013/ MIT-3007) and computing resources from CTI-CSIC. GOI acknowledges financial support from FCT, Ministry of Science and Technology, Portugal (Grant No. PTDC/CTM-NAN/121108/2010 and IF/ 01054/2015). EL acknowledges funding from Spanish “Consolider” project CSD2010-00024. JIM acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and NANOCOSMOS. We are grateful to Prof. C. Palacio and K. Lauwaet for their help with the XPS measurement., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality PVD graphene growth by fullerene decomposition on Cu foils

  • Azpeitia-Urkia, Jon
  • Otero, Gonzalo
  • Palacio, Irene
  • Martínez, José I.
  • Ruiz del Árbol, Nerea
  • Santoro, Gonzalo
  • Gutiérrez-Delgado, Alejandro
  • Aballe, Lucía
  • Foerster, Michael
  • Kalbáč, Martin
  • Vales, V.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Martín-Gago, José A.
  • Munuera, C.
  • López, María Francisca
We present a new protocol to grow large-area, high-quality single-layer graphene on Cu foils at relatively low temperatures. We use C60 molecules evaporated in ultra high vacuum conditions as carbon source. This clean environment results in a strong reduction of oxygen-containing groups as depicted by X-ray photoelectron spectroscopy (XPS). Unzipping of C60 is thermally promoted by annealing the substrate at 800 °C during evaporation. The graphene layer extends over areas larger than the Cu crystallite size, although it is changing its orientation with respect to the surface in the wrinkles and grain boundaries, producing a modulated ring in the low energy electron diffraction (LEED) pattern. This protocol is a self-limiting process leading exclusively to one single graphene layer. Raman spectroscopy confirms the high quality of the grown graphene. This layer exhibits an unperturbed Dirac-cone with a clear n-doping of 0.77 eV, which is caused by the interaction between graphene and substrate. Density functional theory (DFT) calculations show that this interaction can be induced by a coupling between graphene and substrate at specific points of the structure leading to a local sp3 configuration, which also contribute to the D-band in the Raman spectra., Financial support from EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies) and Spanish MINECO (grants MAT2014-54231-C4-1-P,MAT2014-52405-C2-2-R, CSD2009-00013, MAT2015-64110) is acknowledged. JA and NR are supported by the FPI program from MINECO (BES-2012-058600 and BES-2015-072642, respectively). CM and JIM acknowledge the financial support by the “Ramón y Cajal” Program of MINECO (RYC-2014-16626 and RYC-2015-17730, respectively). JIM and GS acknowledge funding from the ERC-Synergy Program (grant ERC-2013-SYG-610256 Nanocosmos). JIM thanks CTI-CSIC for use of computing resources. MK and VV acknowledge funding from ERC-CZ (LL1301) project. GO-I acknowledges FCT for his grant (SFRH/BPD/90562/2012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling universal trends for the energy level alignment in organic/oxide interfaces

  • Martínez, José I.
  • Flores, Fernando
  • Ortega, José
  • Rangan, Sylvie
  • Ruggieri, Charles M.
  • Bartynski, Robert
Presentación del trabajo como contribución oral en los congresos internacionales: IPOE 2017 (julio 2017, Francia) y ECOSS 33 (agosto/septiembre 2017, Hungría).-- Presentación del trabajo como poster oral en el congreso nacional: XGEFES 2018 (enero 2018, España)., In this perspective we present a comprehensive analysis of the energy level alignment at the interface between an organic monolayer (organic = perylenetetracarboxylic dianhydride, PTCDA, zinc tetraphenylporphyrin, Zn-TPP, and tetracyanoquinodimethane, TCNQ) and a prototypical oxide surface, TiO2(110), looking for universal behaviours. PTCDA shows a physisorbed interaction with TiO2 and a small interface dipole potential with its highest occupied molecular orbital (HOMO) energy level located in the oxide energy gap and the lowest occupied molecular orbital (LUMO) energy level located above the oxide conduction band minimum, EC. We analyse how the interface barrier depends on an external bias potential between the organic layer and the oxide surface, Δ, and find for this interface that the screening parameter S = d|(EC − HOMO)|dΔ is close to 1. In the second case, the Zn-TPP monolayer shows a moderate chemisorbed interaction with some charge transfer from the molecule to the oxide and a significant interface dipole potential, in such a way that S decreases to around 0.8. In the TCNQ/TiO2(110) case, the TCNQ molecules present a strong chemical interaction with the oxide; the LUMO energy level is located in the oxide energy gap in such a way that one electron is transferred from the oxide to the organic molecule; we also find that in this case S ≈ 0.5. All these cases can be integrated within a universal behaviour when (EC − HOMO) is calculated as a function of Δ; that function presents a zig-zag curve with a central part having an S-slope, and two plateaus associated with either the LUMO or the HOMO energy levels crossing the oxide Fermi level. In these plateaus, a Coulomb blockade regime arises and a pace charge layer develops in the oxide surface., SR, CR and RAB acknowledge support from the Department of Energy under Grant No. FG02-01ER15256. CR acknowledges support from the Peter Lindenfeld Graduate Fellowship. FF and JO acknowledge support from the Spanish Ministerio de Economía y Competitividad (MINECO) under Grant No. MAT2014-59966-R and through the “María de Maeztu” Program for Units of Excellence in R&D (Grant No. MDM-2014-0377). JIM acknowledges financial support by the Spanish MINECO via the “Ramón y Cajal” Program (Grant No. RYC-2015-17730), and the EU via the ERC-Synergy Program (Grant No. ERC-2013-SYG-610256 NANOCOSMOS) and the Innovation Program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic characterization of the on-surface induced (cyclo)dehydrogenation of a N-heteroaromatic compound on noble metal surfaces

  • Palacio, Irene
  • Pinardi, Anna Lisa
  • Martínez, José I.
  • Preobrajenski, Alexei
  • Cossaro, Albano
  • Jancarik, Andrej
  • Stará̈, Irena G.
  • Méndez, Javier
  • Martín-Gago, José A.
  • López, María Francisca
New nanoarchitectures can be built from polycyclic aromatic hydrocarbons (PAHs) by exploiting the capability of some metal surfaces for inducing cyclodehydrogenation reactions. This bottom-up approach allows the formation of nanostructures with a different dimensionality from the same precursor as a consequence of the diffusion and coupling of the PAHs adsorbed on the surface. In this work we present a thorough study, by means of a combination of X-ray photoemission spectroscopy, near-edge X-ray absorption fine structure and scanning tunneling microscopy with first principle calculations of the structural and chemical transformations undergone by pyridyl-substituted dibenzo[5]helicene on three coinage surfaces, namely Cu(110), Cu(111) and Au(111). Upon annealing, on-surface chemical reactions are promoted affecting the adsorbate/substrate and the molecule/molecule interactions. This thermally induced process favours the transformation from diffusing isolated molecules to polymeric nanographene chains and finally to N-doped graphene., This work has been supported by the Spanish MINECO (Grant MAT2014-54231-C04-1-P), the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS) and the Innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies). JIM acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and Nanocosmos, as well as computing resources from CTI-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral Organization and Charge Redistribution in Chloroaluminum Phthalocyanine on Au(111) Beyond the Monolayer

  • Matencio, Sonia
  • Palacios-Rivera, Rogger
  • Martínez, José I.
  • Ocal, Carmen
  • Barrena, Esther
The nontrivial effect of molecular dipoles on the surface work function of metals is explored for the unidirectional ordered arrays forming the first and second layers of chloroaluminum phthalocyanine on Au(111). This phthalocyanine is a nonplanar molecule with permanent electric dipole perpendicular to its molecular π-plane that can adopt two distinct configurations (Cl-up and Cl-down) when adsorbed on surfaces. The ordered array forming the first layer is known to consist of all Cl-up molecules, whereas the less-studied second layer is formed by molecules in the Cl-down configuration. The inverted orientation of the molecules in these two layers constitutes our benchmark system to investigate the influence of the dipole array orientation on the surface work function. The present study includes an experimental and theoretical approach that combines diverse imaging and spectroscopic scanning probe microscopies, in ultrahigh vacuum, with first-principles density functional theory-based atomistic simulations. Experiment and theory show a chiral organization transferred from the first layer to the growing film that is reflected in the electronic structure. We demonstrate that the obtained surface work function changes are smaller in magnitude than expected from a dipolar approximation because of charge rearrangement at and beyond the monolayer. We provide understanding of the crucial interplay between the interlayer and organic/metal interactions and quantify their effect on the electron density distribution and on the work function changes., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2015-72848- EXP /AEI and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2017 SGR 668. R. P-R. thanks financial support through BES-2014-067942. We acknowledge the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). J.I.M. acknowledges the financial support by the Spanish MINECO via grant no. MAT2017-85089-C2-1- R and the “Ramon y Cajal ́ ” Program (grant no. RYC-2015- 17730), and the EU through the Innovation Program (grant 696656: Graphene Core1. Graphene-based disruptive technologies), as well as the use of computing resources from CTICSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly selective covalent organic functionalization of epitaxial graphene

  • Aceituno Bueno, Rebeca
  • Martínez, José I.
  • Luccas, Roberto F.
  • Ruiz del Árbol, Nerea
  • Munuera, C.
  • Palacio, Irene
  • Palomares, F. Javier
  • Lauwaet, Koen
  • Thakur, Sangeeta
  • Baranowski, Jacek M.
  • Strupinski, Wlodek
  • López, María Francisca
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Martín-Gago, José A.
Graphene functionalization with organics is expected to be an important step for the development of graphene-based materials with tailored electronic properties. However, its high chemical inertness makes difficult a controlled and selective covalent functionalization, and most of the works performed up to the date report electrostatic molecular adsorption or unruly functionalization. We show hereafter a mechanism for promoting highly specific covalent bonding of any amino-terminated molecule and a description of the operating processes. We show, by different experimental techniques and theoretical methods, that the excess of charge at carbon dangling-bonds formed on single-atomic vacancies at the graphene surface induces enhanced reactivity towards a selective oxidation of the amino group and subsequent integration of the nitrogen within the graphene network. Remarkably, functionalized surfaces retain the electronic properties of pristine graphene. This study opens the door for development of graphene-based interfaces, as nano-bio-hybrid composites, fabrication of dielectrics, plasmonics or spintronics., The research leading to these results has received funding from the Spanish MINECO (through Grants No. MAT2014-54231-C4-1-P, MAT2016-80394-R, RYC-2014-16626 and RYC-2015-17730), from the EU via the ERC-Synergy Program (Grant No. ERC-2013-SYG-610256 Nanocosmos) and the European Union Seventh Framework Program (Grant No. 604391 Graphene Flagship), and from the Comunidad Autónoma de Madrid (CAM) via the MAD2D-CM Program (Grant No. S2013/MIT-3007). We also thank the computing resources from CTI-CSIC. R.L. acknowledges financial support from Spanish MINECO under Grant agreement No. CONSOLIDER INGENIO CSD2009-00013., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How Au Outperforms Pt in the Catalytic Reduction of Methane Towards Ethane and Molecular Hydrogen

  • Martínez, José I.
  • Calle-Vallejo, Federico
  • Andrés, Pedro L. de
Within the context of a “hydrogen economy”, it is paramount to guarantee a stable supply of molecular hydrogen to devices such as fuel cells. Besides, catalytic conversion of the environmentally harmful methane into ethane, which has a significantly lower Global Warming Potential, is an important endeavour. Herein we propose a novel proof-of-concept mechanism to accomplish both tasks simultaneously. We provide transition-state barriers and reaction Helmholtz free energies obtained from first-principles Density Functional Theory by taking account vibrations for 2CH4(g)→C2H6(g)+H2(g) to show that H2 can be produced by subnanometer Pt38 and Au38 nanoparticles. The active sites for the reaction are located on different planes on the two nanoparticles, thus differentiating the working principle of the two metals. The complete cycle to reduce CH4 can be performed on Au and Pt with similar efficiencies, but Au requires only half the working temperature of Pt. This sizable decrease of temperature can be traced back to several intermediate steps, in excellent agreement with previous experiments, but most crucially to the final one where the catalyst must be cleaned from H(⋆) to be able to restart the catalytic cycle. This highlights the importance of including in catalytic models the final cleaning steps. In addition, this case study provides guidelines to capitalize on finite-size effects for the design of new and more efficient nanoparticle catalysts., This work has been supported by the Spanish MINECO (Grants MAT2014-54231-C4-1-P and MAT2017-85089-C2-1-R), and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 Nanocosmos) and the EU Graphene Flagship (Grant agreements 696656 Graphene Flagship-core 1 and 785219 Graphene Flagship-core 2). JIM acknowledges funding from Nanocosmos and “Ramón y Cajal” MINECO Program through Grant RYC-2015-17730, and thanks CTI-CSIC for use of computing resources. FC-V thanks “Ramón y Cajal” MINECO Program through Grant RYC-2015-18996., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling of adsorption and intercalation of hydrogen on/into tungsten disulphide multilayers and multiwall nanotubes

  • Martínez, José I.
  • Laikhtman, Alexander
  • Moon, Hoi Ri
  • Zak, Alla
  • Alonso, J. A.
Understanding the interaction of hydrogen with layered materials is crucial in the fields of sensors, catalysis, fuel cells and hydrogen storage, among others. Density functional theory, improved by the introduction of van der Waals dispersion forces, provides an efficient and practical workbench to investigate the interaction of molecular and atomic hydrogen with WS2 multilayers and nanotubes. We find that H2 physisorbs on the surface of those materials on top of W atoms, while atomic H chemisorbs on top of S atoms. In the case of nanotubes, the chemisorption strength is sensitive to the nanotube diameter. Diffusion of H2 on the surface of WS2 encounters quite small activation barriers whose magnitude helps to explain previous and new experimental results for the observed dependence of the hydrogen concentration with temperature. Intercalation of H2 between adjacent planar WS2 layers reveals an endothermic character. Intercalating H atoms is energetically favorable, but the intercalation energy does not compensate for the cost of dissociating the molecules. When H2 molecules are intercalated between the walls of a double wall nanotube, the rigid confinement induces the dissociation of the confined molecules. A remarkable result is that the presence of a full H2 monolayer adsorbed on top of the first WS2 layer of a WS2 multilayer system strongly facilitates the intercalation of H2 between WS2 layers underneath. This opens up an additional gate to intercalation processes., This work was supported by the Spanish MINECO (Grants MAT2017-85089-C2-1-R and MAT2014-54378-R), and by the EU via the ERC-Synergy Program (Grant No. ERC-2013-SYG-610256 NANOCOSMOS) and the H2020 Innovation Program (Grant agreements 696656, Graphene Flagship Core 1, and 785219, Graphene Flagship Core 2). J. I. M. also acknowledges support from Ramón y Cajal Program (Grant RYC-2015-17730), as well as computing resources from CTI-CSIC. A. Z. acknowledges financial support from Israel PAZI foundation. The cooperation of A. L. and H. R. M. was supported by the Israel-Korea Renewable Energy grant. A. L. acknowledges European COST action MP1302 “Nanospectroscopy”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size-Selective Carbon Clusters as Obstacles to Graphene Growth on a Metal

  • Artaud, Alexandre
  • Magaud, Lawrence
  • Ratter, Kitti
  • Gilles, Bruno
  • Guisset, Valérie
  • David, Philippe
  • Martínez, José I.
  • Martín-Gago, José A.
  • Chapelier, Claude
  • Coraux, Johann
Chemical vapor deposition (CVD) on metals is so far the best suited method to produce high-quality, large-area graphene. We discovered an unprecedentedly large family of small size-selective carbon clusters that form together with graphene during CVD. Using scanning tunneling microscopy (STM) and density functional theory (DFT), we unambiguously determine their atomic structure. For that purpose, we use grids based on a graphene moiré and a dilute atomic lattice that unambiguously reveal the binding geometry of the clusters. We find that the observed clusters bind in metastable configurations on the substrate, while the thermodynamically stable configurations are not observed. We argue that the clusters are formed under kinetic control and establish that the evolution of the smallest clusters is blocked. They are hence products of surface reactions in competition with graphene growth, rather than intermediary species to the formation of extended graphene, as often assumed in the literature. We expect such obstacles to the synthesis of perfect graphene to be ubiquitous on a variety of metallic surfaces., J.I.M and J.A.M.-G. acknowledge financial support by the Spanish MINECO (Grants MAT2014-54231-C4-1-P, MAT2017-85089-C2-1-R, and RYC-2015-17730) and the EU via the innovation program under Grant Agreement No. 696656 (Graphene Core1-Graphene-based disruptive technologies). We acknowledge financial support via the France-Spain PICS project organX. VASP calculations were performed using HPC resources from GENCI-IDRIS (Grant 2017-A0020907655)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-stimuli response micro- and nano-layers of a coordination polymer based on Cu2I2 chains linked by 2-aminopyrazine

  • Conesa-Egea, Javier
  • Gallardo-Martínez, J.
  • Delgado, Salomé
  • Martínez, José I.
  • González-Platas, Javier
  • Fernández-Moreira, Vanesa
  • Rodríguez-Mendoza, Ulises R.
  • Ocón, Pilar
  • Zamora, Félix
  • Amo-Ochoa, Pilar
A non-porous laminar coordination polymer of formula [Cu2I2(2-aminopyrazine)]n has been prepared by direct reaction between CuI and 2-aminopyrazine, two industrially available building blocks. The fine tuning of the reaction conditions allows obtaining [Cu2I2(2-aminopyrazine)]n in micrometric and nanometric sizes with same structure and composition. Interestingly, both materials show similar reversible thermo- and pressure-luminescent response as well as reversible electrical response to volatile organic solvents such as acetic acid. X-ray diffraction studies under different conditions, temperatures and pressures, in combination with theoretical calculations allow rationalizing the physical properties of this compound and its changes under physical stimuli. Thus, the emission dramatically increases when lowering the temperature, while an enhancement of the pressure produces a decrease in the emission intensity. These observations emerge as a direct consequence of the high structural flexibility of the Cu2I2 chains which undergo a contraction in Cu-Cu distances as far as temperature decreases or pressure increases. However, the strong structural changes observed under high pressure lead to an unexpected effect that produces a less effective Cu-Cu orbital overlapping that justifies the decrease in the intensity emission. This work shows the high potential of materials based on Cu2I2 chains for new applications., The authors thank financial support from the Spanish Ministerio de Economía y Competitividad (MAT2013-46502-C2-2P, MAT2016-77608-C3-1-P, MAT2016-75883-C2-2-P, MAT2010-20843-C02-01, MAT2016-75586-C4-4-P, CTQ2016-75816-C2-1P), also thank the scientific computing center (CCC) of the Autonoma University of Madrid for their time. J.I.M. acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and the EU via the ERC-Synergy Program (Grant ERC2013-SYG-610256 NANOCOSMOS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smart composite films of nanometric thickness based on copper–iodine coordination polymers. Toward sensors

  • Conesa-Egea, Javier
  • Nogal, Noemí
  • Martínez, José I.
  • Fernández-Moreira, Vanesa
  • Rodríguez-Mendoza, Ulises R.
  • González-Platas, Javier
  • Gómez-García, Carlos J.
  • Delgado, Salomé
  • Zamora, Félix
  • Amo-Ochoa, Pilar
One-pot reactions between CuI and methyl or methyl 2-amino-isonicotinate give rise to the formation of two coordination polymers (CPs) based on double zig-zag Cu2I2 chains. The presence of a NH2 group in the isonicotinate ligand produces different supramolecular interactions affecting the Cu-Cu distances and symmetry of the Cu2I2 chains. These structural variations significantly modulate their physical properties. Thus, both CPs are semiconductors and also show reversible thermo/mechanoluminescence. X-ray diffraction studies carried out under different temperature and pressure conditions in combination with theoretical calculations have been used to rationalize the multi-stimuli-responsive properties. Importantly, a bottom-up procedure based on fast precipitation leads to nanofibers of both CPs. The dimensions of these nanofibres enable the preparation of thermo/mechanochromic film composites with polyvinylidene difluoride. These films are tens of nanometers in thickness while being centimeters in length, representing smaller thicknesses so far reported for thin-film composites. This nanomaterial integration of CPs could represent a source of alternative nanomaterials for opto-electronic device fabrication., The authors thank financial support from the Spanish Ministerio de Economía y Competitividad (MAT2016-77608-C3-1-P, MAT2016-75883-C2-2-P, MAT2010-20843-C02-01, MAT2016- 75586-C4-4-P, CTQ2016-75816-C2-1P). J. I. M. acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and the EU via the ERCSynergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS). J. C. E. acknowledges the financial support by the “FPI-MINECO” Program of MINECO (Grant BES-2015-071534)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Surface Hydrogen-Induced Covalent Coupling of Polycyclic Aromatic Hydrocarbons via a Superhydrogenated Intermediate

  • Sánchez-Sánchez, Carlos
  • Martínez, José I.
  • Ruiz del Árbol, Nerea
  • Ruffieux, Pascal
  • Fasel, Román
  • López, María Francisca
  • Andrés, Pedro L. de
  • Martín-Gago, José A.
The activation, hydrogenation, and covalent coupling of polycyclic aromatic hydrocarbons (PAHs) are processes of great importance in fields like chemistry, energy, biology, or health, among others. So far, they are based on the use of catalysts which drive and increase the efficiency of the thermally- or light-induced reaction. Here, we report on the catalyst-free covalent coupling of nonfunctionalized PAHs adsorbed on a relatively inert surface in the presence of atomic hydrogen. The underlying mechanism has been characterized by high-resolution scanning tunnelling microscopy and rationalized by density functional theory calculations. It is based on the formation of intermediate radical-like species upon hydrogen-induced molecular superhydrogenation which favors the covalent binding of PAHs in a thermally activated process, resulting in large coupled molecular nanostructures. The mechanism proposed in this work opens a door toward the direct formation of covalent, PAH-based, bottom-up synthesized nanoarchitectures on technologically relevant inert surfaces., This work was supported by the Spanish MINECO (grant MAT2017-85089-C2-1-R), the Swiss National Science Foundation, and the EU via the ERC-Synergy Program (grant no. ERC-2013-SYG-610256 NANOCOSMOS) and the Innovation Program (grant 696656: Graphene Core1. Graphene-based disruptive technologies). J.I.M. acknowledges support from Ramón y Cajal Program (Grant RYC-2015-17730), as well as computing resources from CTI-CSIC. C.S.-S. is grateful to Ministerio de Economía y Competitividad for financial support via the Juan de la Cierva Incorporación grant (IJCI-2014-19291, co-funded by the European Investment Bank). We thank Dra., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Group 10 Metal Benzene-1,2-dithiolate Derivatives in the Synthesis of Coordination Polymers Containing Potassium Countercations

  • Castillo, Óscar
  • Delgado, Esther
  • Gómez-García, Carlos J.
  • Hernández, Diego
  • Hernández, Elisa
  • Martín, Avelino
  • Martínez, José I.
  • Zamora, Félix
The use of theoretical calculations has allowed us to predict the coordination behavior of dithiolene [M(SCHS)] (M = Ni, Pd, Pt) entities, giving rise to the first organometallic polymers {[K(μ-HO)][Ni(SCHS)]} and {[K(μ-HO)(thf)][K(μ-HO)(thf)][Pd(SCHS)]} by one-pot reactions of the corresponding d metal salts, 1,2-benzenedithiolene, and KOH. The polymers are based on σ,π interactions between potassium atoms and [M(SCHS)] (M = Ni, Pd) entities. In contrast, only σ interactions are observed when the analogous platinum derivative is used instead, yielding the coordination polymer {[K(μ-thf)][Pt(SCHS)]}., This work was supported in part by the MICINN (grants MAT2016-77608-C3-1-P and MAT2016-75883-C2-1-P), Generalitat Valenciana (PrometeoII/2014/076), and ISIC. J.I.M. acknowledges financial support by the “Ramón y Cajal” Program of MINECO (RYC-2015-17730).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-thin NaCl films as protective layers for graphene

  • Palacio, Irene
  • Lauwaet, Koen
  • Vázquez Burgos, Luis
  • Palomares, F. Javier
  • González-Herrero, Héctor
  • Martínez, José I.
  • Aballe, Lucía
  • Foerster, Michael
  • García-Hernández, Mar
  • Martín-Gago, José A.
The ageing of graphene is an important issue for technological applications. Capping layers are a good way of circumventing this problem. In this work, we propose the use of ultra-thin NaCl films as easilyremovable protective layers. We have carried out a detailed characterization of the NaCl/graphene interface on metal substrates, namely Cu(111) and Ir(111), by means of complementary microscopies, electron diffraction and spectroscopic techniques. Interestingly, we show that NaCl neither interacts in a chemical way with graphene nor intercalates through it. We demonstrate that the NaCl film is stable under ambient conditions, protecting the graphene surface from oxidation. In addition, after removing the protective layer, graphene remains intact., This work has been supported by the EU Graphene Flagship funding (Grant Graphene Core2 785219), the Spanish MINECO (MAT2017-85089-C2-1R, MAT2016-80394-R and RYC-2015-17730) and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS) and the European Structural Funds via FotoArt-CM project (P2018/NMT-4367)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen intercalation in PVD graphene grown on copper substrates: A decoupling approach

  • Azpeitia-Urkia, Jon
  • Palacio, Irene
  • Martínez, José I.
  • Ochando, Isabel M.
  • Lauwaet, Koen
  • Mompean, Federico J.
  • Ellis, Gary James
  • García-Hernández, Mar
  • Martín-Gago, José A.
  • Munuera, C.
  • López, María Francisca
We investigate the intercalation process of oxygen in-between a PVD-grown graphene layer and different copper substrates as a methodology for reducing the substrate-layer interaction. This growth method leads to an extended defect-free graphene layer that strongly couples with the substrate. We have found, by means of X-ray photoelectron spectroscopy, that after oxygen exposure at different temperatures, ranging from 280 °C to 550 °C, oxygen intercalates at the interface of graphene grown on Cu foil at an optimal temperature of 500 °C. The low energy electron diffraction technique confirms the adsorption of an atomic oxygen adlayer on top of the Cu surface and below graphene after oxygen exposure at elevated temperature, but no oxidation of the substrate is induced. The emergence of the 2D Raman peak, quenched by the large interaction with the substrate, reveals that the intercalation process induces a structural undoing. As suggested by atomic force microscopy, the oxygen intercalation does not change significantly the surface morphology. Moreover, theoretical simulations provide further insights into the electronic and structural undoing process. This protocol opens the door to an efficient methodology to weaken the graphene-substrate interaction for a more efficient transfer to arbitrary surfaces., This work was supported by the Spanish MINECO (GrantsMAT2017-85089-C2-1-R and RYC-2015-17730), the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), EUGraphene Flagship funding (Grant GrapheneCore3 881603) and the''Comunidad de Madrid'' via the FotoArt-CM project (S2018/NMT-4367). JA acknowledges support from the FPI program of SpanishMINECO (BES-2012-058600).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cunning defects: emission control by structural point defects on Cu(i)I double chain coordination polymers

  • Conesa-Egea, Javier
  • González-Platas, Javier
  • Rodríguez-Mendoza, Ulises R.
  • Martínez, José I.
  • Ocón, Pilar
  • Fernández-Moreira, Vanesa
  • Costa, Rubén D.
  • Fernández-Cestau, Julio
  • Zamora, Félix
  • Amo-Ochoa, Pilar
The direct reaction between CuI and 3,5-dichloropyridine, in acetonitrile at room temperature, gives rise to [Cu(Cl2-py)I]n (Cl2-py = 3,5-dichloropyridine), which consists of a Cu(I)–I double chain based coordination polymer (CP) grafted with 3,5-dichloropyridine. In this simple one-pot process, the modulation of the reaction conditions, i.e. slight variations in the CuI and Cl2-py ratio caused by in situ disproportion, can, however, produce significant changes in the physical properties of the materials. For instance, the reaction carried out in a 1 : 1 ratio under ambient conditions leads to compound 1, while compound 1′ is obtained upon a solvothermal process of stoichiometric reaction mixture, Cl2-py and CuI, which produces partial disproportion (<0.5% in weight) of the initial Cu(I). Interestingly, compounds 1 and 1′ show an identical chemical composition and structure as determined by both single crystal and powder X-ray diffraction. However, they display remarkable differences in the luminescence behavior, featuring broad emission bands centered at 515 and 670 nm and associated to photoluminescence quantum yields of 12 and 5% for 1 and 1′, respectively. Density functional theory (DFT) calculations allowed us to rationalize the nature of this rare behavior. This is attributed to structural defects related to the weaker coordination bond present in these structures that provoke the strong red-shifted emission., The authors thank financial support from the Spanish Ministerio de Economía y Competitividad (MAT2016-77608-C3-1-P, MAT2016-75883-C2-2-P, MAT2010-20843-C02-01, CTQ2016-75816-C2-1P, MAT2016-75586-C4-4-P) and by EU-FEDER funds. JGP thanks to Servicios Generales de Apoyo a la Investigación (SEGAI) at La Laguna University. J. I. M. acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS). J. C. E. acknowledges the financial support by the “FPI-MINECO” Program of MINECO (Grant BES-2015-071534). R. D. C. acknowledges the program “Ayudas para la atracción de talento investigador—Modalidad 1 of the Consejería de Educación, Juventud y Deporte—Comunidad de Madrid with the Reference No. 2016-T1/IND-1463.”, Spanish MINECO for the Ramón y Cajal program (RYC-2016-20891), the Europa Excelencia program (ERC2019-092825), and HYNANOSC (RTI2018-099504-A-C22). R. D. C. also acknowledges the 2018 Leonardo Grant for Researchers and Cultural Creators from BBVA Foundation and the FOTOART-CM project funded by Madrid region under programm P2018/NMT-4367. J. F.-C. acknowledges the Marie Skłodowska-Curie Individual Fellowships (H2020-MSCA-IF-2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional copper(I) coordination polymers with aromatic mono- and ditopic thioamides

  • Troyano, Javier
  • Zapata, Eduardo
  • Perles, Josefina
  • Amo-Ochoa, Pilar
  • Fernández-Moreira, Vanesa
  • Martínez, José I.
  • Zamora, Félix
  • Delgado, Salomé
Direct reactions under ambient conditions between CuX (X = Br, I) and thiobenzamide (TBA) were carried out at different ratios, giving rise to the formation of a series of one-dimensional (1D) coordination polymers, (CPs) [CuI(TBA)]n (1), [Cu3I3(TBA)2]n (4), and [CuBr(TBA)]n (5), as well as two molecular complexes, [CuI(TBA)3] (2) and [Cu2I2(TBA)4]·2MeCN (3). Recrystallization of 1 and 5 yielded a series of isostructural 1D CP solvated species, [CuI(TBA)·S]n]n (1·S; S = tetrahydrofuran, acetone, methanol) and [CuBr(TBA)·S]n (5·S; S = tetrahydrofuran, acetone), respectively. Similar reactions between CuI and 1,4-dithiobenzamide (DTBA) allowed the isolation of a series of two-dimensional (2D) CPs [CuI(DTBA)·S]n (6·S; S = N,N-dimethylformamide, acetonitrile, methanol). Interestingly, 1·S and 5·S showed variable luminescence and electrical semiconductivity depending on the different solvents located in their structures. Thus, 1 and 5 could display potential application for sensing volatile organic vapors by virtue of the significant changes in their emission upon solvent exposure, even by the naked eye. Theoretical calculations have been used to rationalize these electronic properties., MINECO (Grants MAT2016-77608-C3-1-P, MAT2016-75883-C2-1-P, and MAT2017-85089-C2-1-R; Ramon y Cajal, Grant RYC-2015-17730), Ministerio de Ciencia, Innovación y Universidades (Grant CTQ2016-75816-C2-1-P), and European Union’s Horizon 2020 research and innovation programme (Grant 785219; Graphene Flagship–core2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Surface Driven Formal Michael AdditionProduces m-PolyanilineOligomers on Pt (111)

  • Ruiz del Árbol, Nerea
  • Sánchez-Sánchez, Carlos
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Gómez-Herrero, Ana C.
  • Merino, Pablo
  • Piantek, Marten
  • Serrate Donoso, David
  • Lacovig, Paolo
  • Lizzit, Silvano
  • Alemán, José
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
[EN] On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1, 4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures., Spanish MINECO(MAT2017-85089-C2-1-R, RYC-2015–17730), European Research Council (ERC) under contract (ERC-2013-SYG-610256 NANOCOSMOS), Comunidad de Madrid via Programa de InvestigaciónTecnologías 2018 (FOTOART-CMS2018/NMT-4367), and the innovation program under grantagreements 785219 and 881603 (GrapheneCore2 and Gra-pheneCore3-Graphene-based disruptive technologies,re-spectively). CSS acknowledges MCIU for the “RamnyCajal” contract (RYC2018-024364-I). NRdA is grateful tothe Spanish MINECO for support from the FPI program(BES-2015–072642), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen quenches the size effects in carbon clusters

  • Martínez, José I.
  • Alonso, Julio A.
A characteristic fingerprint of atomic clusters is that their properties can vary in a non-smooth way with the cluster size N. This is illustrated herein by studying the cluster size dependence of several properties of neutral C and cationic C+N carbon clusters: C-C bond lengths, cluster structure, intrinsic cluster stability, ionization energy, and spatial distribution of the reactivity index for charge exchange with electrophiles. Nonetheless, clusters can lose the size dependence of their properties by interaction with other chemical species, which is rationalized in this study by analyzing carbon clusters fully saturated with hydrogen to form linear alkanes, CH. In all cases, the lowest energy structures are zigzagging linear chains, the variations of C-C bond lengths and angles with alkane size are very minor and smooth, the stability function shows practically no structure as a function of the alkane size, the ionization energies just decrease smoothly with alkane size, and the spatial distribution of the reactivity index is analogous and highly delocalized in all the alkanes. In summary, the interaction of carbon clusters with hydrogen to form alkanes quenches all the size-dependent features that the carbon clusters originally owned. The arrival at the quenching of the size effects follows an involved path. In each CH family with fixed N, the values of the properties of the molecules like the ionization potential, the electron affinity, and others show sizable oscillations as the number of hydrogen atoms grows from the pure carbon cluster to the alkane., We acknowledge funding from the Spanish MINECO (Grants MAT2017-85089-C2-1-R and RYC-2015-17730), Comunidad de Madrid (FotoArt-CM Project P2018/NMT-4367) through the Program of R&D activities between research groups in Technologies 2018, co-financed by European Structural Funds, Junta de Castilla y León (Grant VA021G18), University of Valladolid (GIR Grupo de Física de Nanoestructuras), and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 Nanocosmos) and EU Horizon 2020 Research and Innovation program (Grant 785219 – Graphene Flagship Core2–). We also thank the computing resources from CTI-CSIC., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper-assisted oxidation of catechols into quinone derivatives

  • Gómez-Herrero, Ana Cristina
  • Sánchez-Sánchez, Carlos
  • Chérioux, Frédéric
  • Martínez, José I.
  • Abad, José M.
  • Floreano, Luca
  • Verdini, Alberto
  • Cossaro, Albano
  • Mazaleyrat, Estelle
  • Guisset, Valérie
  • David, Philippe
  • Lisi, Simone
  • Martín-Gago, José A.
  • Coraux, Johann
Catechols are ubiquitous substances often acting as antioxidants, thus of importance in a variety of biological processes. The Fenton and Haber–Weiss processes are thought to transform these molecules into aggressive reactive oxygen species (ROS), a source of oxidative stress and possibly inducing degenerative diseases. Here, using model conditions (ultrahigh vacuum and single crystals), we unveil another process capable of converting catechols into ROSs, namely an intramolecular redox reaction catalysed by a Cu surface. We focus on a tri-catechol, the hexahydroxytriphenylene molecule, and show that this antioxidant is thereby transformed into a semiquinone, as an intermediate product, and then into an even stronger oxidant, a quinone, as final product. We argue that the transformations occur via two intramolecular redox reactions: since the Cu surface cannot oxidise the molecules, the starting catechol and the semiquinone forms each are, at the same time, self-oxidised and self-reduced. Thanks to these reactions, the quinone and semiquinone are able to interact with the substrate by readily accepting electrons donated by the substrate. Our combined experimental surface science and ab initio analysis highlights the key role played by metal nanoparticles in the development of degenerative diseases., This work was supported by the French National Research Agency through contract ORGANI'SO (ANR-15-CE09-0017). A. C. G. H. and J. C. thank Laurence Magaud for fruitful discussion about the simulation of the structure of the molecules. F. C. thanks Sarah Benchabane for fruitful discussion. C. S. S., J. I. M. and J. A. M. G. acknowledge financial support from Spanish MINECO (MAT2017-85089-C2-1-R, RYC-2015-17730, RYC-2018-024364-I), European Research Council (ERC) under contract (ERC-2013-SYG-610256 NANOCOSMOS), Comunidad de Madrid via Programa de Investigación Tecnologías 2018 (FOTOART-CM S2018/NMT-4367), and the innovation program under grant agreements 785219 and 881603 (GrapheneCore2 and GrapheneCore3-Graphene-based disruptive technologies, respectively). E. M. acknowledges financial support from Région Rhône Alpes (ARC6 program) and the Labex LANEF. J. C. and J. A. M. G. acknowledges financial support from CNRS and CSIC via the IEA program (PIC2017-FR4/07981), under the ORGAN'X project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In silico design of 2D polymers containing truxene-based platforms: insights into their structural and electronic properties

  • Gámez-Valenzuela, Sergio
  • Echeverri, Marcelo
  • Gómez-Lor, Berta
  • Martínez, José I.
  • Ruiz Delgado, M. Carmen
In the present work, we investigate two-dimensional (2D) conjugated polymers based on C3-symmetric truxene-based cores at the density functional theory (DFT) level. In total, 27 different 2D polymers have been exhaustively studied with the aim to explore the impact of the following effects on the electronic and charge-transport properties: (i) the nature of the conjugated platform, going from electron-rich truxene (Tx) and triindole (Tr) units to electron-deficient truxenone (To) cores, (ii) the spacing of the cores with different bridges, i.e., phenylene (Ph) or ethynylene (A) units, (iii) the linker position (2,7,12-substitution in the T2 polymers and 3,8,13-substitution in T3 polymers), and (iv) the increased number of ¿-bridges connecting the cores, from three linkers in T2 and T3 to six linkers in T2,3. To this end, we have carried out a large battery of DFT calculations on fragments extracted from the 2D polymers (dimers and trimers) as well as on the corresponding periodic 2D structures (infinite monolayers and self-assembled monolayers) using periodic boundary conditions. Our results show that simultaneous manipulation of the pore surface size and band-gap engineering together with charge-transport parameters can be achieved in these truxene-based 2D polymers by fine-tuning their structural features. The contributions of this study to the overall understanding of the structure¿electronic property relationships of these semiconducting polymers and its correlation with available experimental work are highlighted. Our results provide interesting guidelines to design novel 2D materials with applications ranging from sensing to photocatalysis or electronics., This work was financially supported by the MINECO (CTQ2016-78557-R) and MICINN (PID2019-104125RB-I00) of Spain. JIM acknowledges financial support from Spanish MINECO (MAT2017-85089-C2-1-R, RYC-2015-17730), Comunidad de Madrid via Programa de Investigación Tecnologías 2018 (FOTOART-CM S2018/NMT-4367), and the innovation program under grant agreements 785219 and 881603 (GrapheneCore2 and GrapheneCore3-Graphene-based disruptive technologies, respectively). The work at the University of Málaga wasfunded by the MICINN (PID2019-110305GB-I00) and by the Junta de Andalucıa (P09-FQM-4708, UMA18-FEDERJA-080). S. G.-V. thanks the MINECO for a FPU predoctoral fellowship (FPU17/04908). Computer resources, technical expertise and assistance provided by the SCBI (Supercomputing and Bioinformatics) centre of the University of Málaga are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cathodoluminescence in single and multiwall WS2 nanotubes: Evidence for quantum confinement and strain effect

  • Ghosh, Shamik
  • Brüser, V.
  • Kaplan-Ashiri, I.
  • Popovitz-Biro, R.
  • Peglow, S.
  • Martínez, José I.
  • Alonso, J. A.
  • Zak, Alla
[EN] For nanoparticles with sub-10 nm diameter, the electronic bandgap becomes size dependent due to quantum confinement; this, in turn, affects their electro-optical properties. Thereby, MoS2 and WS2 monolayers acquire luminescent capability, due to the confinement-induced indirect-to-direct bandgap transition. Rolling up of individual layers results in single wall inorganic nanotubes (SWINTs). Up to the present study, their luminescence properties were expected to be auspicious but were limited to theoretical investigations only, due to the scarcity of SWINTs and the difficulties in handling them. By optimizing the conditions in the plasma reactor, relatively high yields of WS2 SWINTs 3–7 nm in diameter were obtained in this work, compared to previous reports. A correlative approach, transmission electron microscopy coupled with a scanning electron microscope, was adapted to overcome handling obstacles and for testing individual nanotubes by low-temperature cathodoluminescence. Clear cathodoluminescence spectra were obtained from WS2-SWINTs and compared with those of WS2 multiwall nanotubes and the corresponding bulk material. Uniquely, the optical properties of INTs acquired from cathodoluminescence were governed by the opposite impact from quantum size effect and strain in the bent triple S-W-S layers. The experimental findings were confirmed by the Density Functional and Time-Dependent Density Functional theoretical modeling of monolayer and bilayer nanotubes of different chiralities and diameters. This study provides experimental evidence of the quantum confinement effect in WS2 SWINTs akin to WS2 monolayer. The ability to tune the electronic structure with morphology or number of layers may be exploited toward photoelectrochemical water splitting with WS2 catalysts, devising field effect transistors, photodetectors, and so on., The research of A.Z. was supported by a grant from the Israel Science Foundation (No. 330/16). The work of J.A.A. was supported by Junta de Castilla y León (Grant No. VA021G18) and the University of Valladolid (GIR Physics of Nanostructures). J.I.M. acknowledges financial support from Spanish MINECO (No. MAT2017-85089-C2–1-R, RYC-2015-17730), Comunidad de Madrid via Programa de Investigación Tecnologías 2018 (No. FOTOART-CM S2018/NMT-4367), and the innovation program under grant agreements 785219 and 881603 (GrapheneCore2 and GrapheneCore3-Graphene-based disruptive technologies, respectively). The authors are grateful to Dr. Alex Idelevich from HIT, who synthesized multiwall WS2 nanotubes. The authors thank Dr. A. Quade and A. Albrecht, of the Leibniz Institute for Plasma Science and Technology, who performed the XPS and XRD analysis, respectively., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Smart composite films of nanometric thickness based on copper-iodine coordination polymers. Toward sensors

  • Conesa-Egea, J.
  • Nogal, N.
  • Martínez, J.I.
  • Fernández-Moreira, V.
  • Rodríguez-Mendoza, U.R.
  • González-Platas, J.
  • Gómez-García, C.J.
  • Delgado, S.
  • Zamora, F.
  • Amo-Ochoa, P.
One-pot reactions between CuI and methyl or methyl 2-amino-isonicotinate give rise to the formation of two coordination polymers (CPs) based on double zig-zag Cu2I2 chains. The presence of a NH2 group in the isonicotinate ligand produces different supramolecular interactions affecting the Cu-Cu distances and symmetry of the Cu2I2 chains. These structural variations significantly modulate their physical properties. Thus, both CPs are semiconductors and also show reversible thermo/mechanoluminescence. X-ray diffraction studies carried out under different temperature and pressure conditions in combination with theoretical calculations have been used to rationalize the multi-stimuli-responsive properties. Importantly, a bottom-up procedure based on fast precipitation leads to nanofibers of both CPs. The dimensions of these nanofibres enable the preparation of thermo/mechanochromic film composites with polyvinylidene difluoride. These films are tens of nanometers in thickness while being centimeters in length, representing smaller thicknesses so far reported for thin-film composites. This nanomaterial integration of CPs could represent a source of alternative nanomaterials for opto-electronic device fabrication.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multifunctional Copper(I) Coordination Polymers with Aromatic Mono- and Ditopic Thioamides

  • Troyano, J.
  • Zapata, E.
  • Perles, J.
  • Amo-Ochoa, P.
  • Fernández-Moreira, V.
  • Martínez, J.I.
  • Zamora, F.
  • Delgado, S.
Direct reactions under ambient conditions between CuX (X = Br, I) and thiobenzamide (TBA) were carried out at different ratios, giving rise to the formation of a series of one-dimensional (1D) coordination polymers, (CPs) [CuI(TBA)] n (1), [Cu 3 I 3 (TBA) 2 ] n (4), and [CuBr(TBA)] n (5), as well as two molecular complexes, [CuI(TBA) 3 ] (2) and [Cu 2 I 2 (TBA) 4 ]·2MeCN (3). Recrystallization of 1 and 5 yielded a series of isostructural 1D CP solvated species, [CuI(TBA)·S] n ] n (1·S; S = tetrahydrofuran, acetone, methanol) and [CuBr(TBA)·S] n (5·S; S = tetrahydrofuran, acetone), respectively. Similar reactions between CuI and 1, 4-dithiobenzamide (DTBA) allowed the isolation of a series of two-dimensional (2D) CPs [CuI(DTBA)·S] n (6·S; S = N, N-dimethylformamide, acetonitrile, methanol). Interestingly, 1·S and 5·S showed variable luminescence and electrical semiconductivity depending on the different solvents located in their structures. Thus, 1 and 5 could display potential application for sensing volatile organic vapors by virtue of the significant changes in their emission upon solvent exposure, even by the naked eye. Theoretical calculations have been used to rationalize these electronic properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On-Surface Driven Formal Michael Addition Produces m-Polyaniline Oligomers on Pt(111)

  • Ruiz del Árbol, N.
  • Sánchez-Sánchez, C.
  • Otero-Irurueta, G.
  • Martínez, J.I.
  • de Andrés, P.L.
  • Gómez-Herrero, A.C.
  • Merino, P.
  • Piantek, M.
  • Serrate, D.
  • Lacovig, P.
  • Lizzit, S.
  • Alemán, J.
  • Ellis, G.J.
  • López, M.F.
  • Martín-Gago, J.A.
On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1, 4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures.