Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pulsed electric fields as a green technology for the extraction of bioactive compounds from thinned peach by-products

  • Redondo, D.
  • Venturini, M.E.
  • Luengo, E.
  • Raso, J.
  • Arias, E.
Thinned fruits are agricultural by-products which nowadays have few economic or environmental benefits. However, previous studies have revealed that these immature fruits have a large amount of antioxidant compounds. The aim of this study was to evaluate whether pulsed electric fields (PEF) might be a suitable green technology for enhancing the extraction of phenols, flavonoids and antioxidant compounds from fresh thinned peaches, thus reducing the use of methanol. Moreover, response surface methodology has been used to determine the optimal PEF treatment conditions, observing that the solvent is the main factor. The highest amounts of bioactive compounds were extracted using 80% methanol and no PEF. Methanol combined with PEF produced a negative effect on the extraction yield. However, the use of water as a solvent increased the amount of total bioactive compounds and individual phenols (chlorogenic acid, coumaric acid and neochlorogenic acid). Thus, PEF-assisted extraction of bioactive compounds from thinned peach fruits using water as a solvent is an alternative to conventional extraction methods which require dried products, large amounts of organic solvents and long extraction times.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Potential of a new strain of Bacillus amyloliquefaciens BUZ-14 as a biocontrol agent of postharvest fruit diseases

  • Calvo, H.
  • Marco, P.
  • Blanco, D.
  • Oria, R.
  • Venturini, M. E.
The biocontrol potential of the Bacillus amyloliquefaciens strain BUZ-14 was tested against the main postharvest diseases of orange, apple, grape and stone fruit. After characterizing the temperature and pH growth curves of strain BUZ-14, its in vitro antifungal activity was determined against Botrytis cinerea, Monilinia fructicola, M. laxa, Penicillium digitatum, P. expansum and P. italicum. Subsequently, in vivo activity was tested against these pathogens by treating fruit with cells, endospores and cell-free supernatants. The in vitro results showed that BUZ-14 inhibited the growth of all the pathogens tested corresponding to the least susceptible species, P. italicum, and the most susceptible, M. laxa. In vivo tests corroborated these results as most of the treatments decreased the incidence of brown rot in stone fruit from 100% to 0%, establishing 107 CFU mL-1 as the minimum inhibitory concentration. For the Penicillium species a preventive treatment inhibited P. digitatum and P. italicum growth in oranges and reduced P. expansum incidence in apples from 100% to 20%. Finally, it has been demonstrated that BUZ-14 was able to survive and to control brown rot in peaches stored at cool temperatures, making it a very suitable biocontrol agent for application during the post-harvest storage and marketing of horticultural products.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled atmosphere pallets to extend the shelf-life of Calanda peaches

  • Gracia Alquézar, Ana Pilar
  • Gimeno Martínaz, David
  • Lasierra Villacampa, Beatriz
  • Oria Almudí, Rosa
  • Venturini Crespo, Mª Eugenia
Calanda peaches have achieved great prestige in European markets because of their size, firmness and sweetness. However, apart from maintaining current markets by offering a high-quality product, further research is needed to improve their shelf-life in order to reach more distant markets. Thus, the effects of controlled atmosphere (CA) pallets at O2:CO2 concentrations of, 10:10, 5:10 and 2:10%, on the quality and shelf-life of Calanda ‘Calante’ peaches were studied. Physico-chemical parameters, ethanol and acetaldehyde production, decay percentage, chilling injury development and sensory evaluation were determined four times every 2 weeks of cold storage and shelf-life. Also, gas chromatography-olfactometry was conducted to detect off-flavours. Peaches stored at ambient atmosphere at 1°C promptly developed symptoms of chilling injury that became severe on day 28. All the CA conditions delayed ripening and prevented chilling injury with the best sensory results obtained for peaches stored at 2% O2:10% CO2. Although an increase in the production of ethanol and acetaldehyde was detected from day 14 onwards, this did not affect the quality of the fruit that was excellent after 56 days at 1°C plus a shelf-life period of 1 day at 20°C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reduction of potassium content of green bean pods and chard by culinary processing. Tools for chronic kidney disease

  • Martínez-Pineda, Montserrat
  • Yagüe-Ruiz, Cristina
  • Caverni-Muñoz, Alberto
  • Vercet-Tormo, Antonio
Introduction In order to prevent a possible hyperkalemia, chronic renal patients, especially in advanced stages, must follow a low potassium diet. So dietary guidelines for chronic kidney disease recommend limiting the consumption of many vegetables, as well as to apply laborious culinary techniques to maximize the reduction of potassium. Objective The aim of this work is to analyze potassium content from several vegetable, fresh products, frozen and preserved, as well as check and compare the effectiveness in potassium reduction of different culinary processes, some of them recommended in dietary guidelines such as soaking or double cooking. Methods Sample potassium content was analyzed by triplicate using flamephotometry. Results The results showed significant reductions in potassium content in all culinary processes studied. The degree of loss varied depending on the type of vegetable and processing applied. Frozen products achieved greater reductions than the fresh ones, obtaining in some cases losses greater than 90%. In addition, it was observed how in many cases the single application of a normal cooking reached potassium reductions to acceptable levels for its inclusion in renal patient diet. Conclusion The results shown in this study are very positive because they provide tools for professionals who deal with this kind of patients. They allow them to adapt more easily to the needs and preferences of their patients and increase dietary variety.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel Egg White Protein–Chitin Nanocrystal Biocomposite Films with Enhanced Functional Properties

  • Baquero-Aznar, Víctor
  • Calvo, Víctor
  • González-Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Salvador, María Luisa
  • González-Buesa, Jaime
This study aims to develop egg white protein (EWP) biocomposite films reinforced with chitin nanocrystals (ChNCs, 1–5 wt.%) by compression molding to overcome the mechanical and barrier limitations of protein-based films for sustainable packaging. ChNC incorporation may modulate film microstructure, crystallinity, and thermal stability, thereby enhancing functional performance. Films were prepared by adding ChNCs either as aqueous suspensions or lyophilized powder, and their structural, thermal, mechanical, optical, and barrier properties were systematically evaluated. Scanning electron microscopy confirmed a more homogeneous dispersion of ChNCs when added as suspensions, while powder addition promoted partial aggregation. X-ray diffraction revealed increased crystallinity with ChNC reinforcement. Mechanical tests showed that films with 2 wt.% ChNCs in suspension exhibited the highest tensile strength, whereas those with 5 wt.% in powder form became stiffer but less extensible. Oxygen permeability was not significantly affected, while water vapor permeability decreased by up to 14.5% at 2 wt.% ChNCs incorporated as powder. Transparency and color remained largely unchanged by ChNC addition, except for a slight increase in yellowness. Overall, these findings demonstrate that the incorporation method and concentration of ChNCs play a crucial role in tailoring the physicochemical performance of EWP films. The results provide new insights into the design of EWP-based nanocomposites and support their potential as bio-derived materials for advanced food packaging applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing

  • Martínez-Barón, Carlos
  • Calvo, Víctor
  • Álvarez-Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González-Domínguez, José Miguel
Processing carbon nanotubes (CNTs) into conductive films via liquid-phase is highly attractive for the fabrication of electronic and electrochemical device components. However, conventional deposition methods usually suffer from several limitations, including environmental concerns, loss of intrinsic properties, and poor reproducibility. Nanostructured biopolymers (NBs), such as cellulose (CNCs) and chitin (ChNCs) nanocrystals, offer an environmentally friendly strategy for dispersing CNTs in water alternative to organic solvents, surfactants or chemical functionalization. In this work, we present the first direct comparison of conductive and electroactive films resulting from using CNCs and ChNCs as dispersing agents for both single-walled and multi-walled CNTs. The as-made aqueous dispersions are used as inks to fabricate CNT/NB films via spray coating, achieving excellent homogeneity, controllable film thickness, and sheet resistances mostly below 130 Ohm Sq-1. Furthermore, we demonstrate that postdeposition thermal treatment at 450 1C in an inert atmosphere effectively pyrolyzes the non-conductive NB matrix while increasing contacts between CNTs in the network, leading to enhanced electrical conductivities and lectrochemically active surface areas. These findings highlight NBs as greener processing agents for the formulation of waterborne CNT inks and emphasize their relevance for the controlled and sustainable fabrication of conductive films and electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of cellulose nanocrystals as a green entry to structured functional carbons

  • Güemes, Lucas
  • Calvo, Víctor
  • Maya-Segura, Vanessa B.
  • Pires, Elísabet
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, Enrique
  • González-Domínguez, José M.
The bottom-up assembly of cellulose nanocrystals (CNCs) into porous scaffolds offers a sustainable route to translate their intrinsic properties into functional 3D materials. This strategy enables precise control over porous architectures, unlocking opportunities for high-performance materials tailored to specific applications. Here, we present the fabrication of structured carbons derived from nanocellulose precursors. CNCs are isolated from cellulosic feedstock in type-I and type-II crystalline allomorphs via a one-pot synthesis process followed by minimal processing steps. The resulting aqueous CNC colloids self-assemble into cross-linked hydrogels through controlled hydrothermal aggregation, followed by lyophilization to produce macroporous aerogels (bulk porosities up to 98%). Each allomorph exhibits distinct aggregation behavior, explored for the first time with type-II CNCs. As proof of concept, these aerogels undergo pyrolysis at varying temperatures and subsequent sulfonation, yielding highly porous carbons functionalized with sulfonic acid groups (functionalization degree of ca. 2400 μmol·g−1). The resulting materials combine macroporosity from hydrothermal assembly with microporosity generated during pyrolysis and sulfonation, forming a hierarchical structure ideal for catalytic applications. Their performance is demonstrated in solketal synthesis (yielding ∼90% of solketal in consecutive cycles after 4 h at room temperature) positioning CNC-based sulfonated aerogels as a greener alternative to conventional Brønsted acid catalysts and surpassing classical activated carbons in sustainability and design.