Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 427
Encontrada(s) 5 página(s)

Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Dielectric properties of colon polyps, cancer, and normal mucosa: Ex vivo measurements from 0.5 to 20 GHz

  • Guardiola, Marta
  • Buitrago, Santiago
  • Fernández-Esparrach, Gloria
  • O’Callaghan, Joan M.
  • Romeu, Jordi
  • Cuatrecasas, Miriam
  • Córdova, Henry
  • González Ballester, Miguel Ángel, 1973-
  • Camara, Oscar
Purpose: Colorectal cancer is highly preventable by detecting and removing polyps, which are the precursors. Currently, the most accurate test is colonoscopy, but still misses 22% of polyps due to visualization limitations. In this paper, we preliminary assess the potential of microwave imaging and dielectric properties (e.g., complex permittivity) as a complementary method for detecting polyps and cancer tissue in the colon. The dielectric properties of biological tissues have been used in a wide variety of applications, including safety assessment of wireless technologies and design of medical diagnostic or therapeutic techniques (microwave imaging, hyperthermia, and ablation). The main purpose of this work is to measure the complex permittivity of different types of colon polyps, cancer, and normal mucosa in ex vivo human samples to study if the dielectric properties are appropriate for classification purposes. Methods: The complex permittivity of freshly excised healthy colon tissue, cancer, and histological samples of different types of polyps from 23 patients was characterized using an open-ended coaxial probe between 0.5 and 20 GHz. The obtained measurements were classified into five tissue groups before applying a data reduction step with a frequency dispersive single-pole Debye model. The classification was finally compared with pathological analysis of tissue samples, which is the gold standard. Results: The complex permittivity progressively increases as the tissue degenerates from normal to cancer. When comparing to the gold-standard histological tissue analysis, the sensitivity and specificity of the proposed method is the following: 100% and 95% for cancer diagnosis; 91% and 62% for adenomas with high-grade dysplasia; 100% and 61% for adenomas with low-grade dysplasia; and 100% and 74% for hyperplastic polyps, respectively. In addition, complex permittivity measurements were independent of the lesion shape and size, which is also an interesting property comparing to current colonoscopy techniques. Conclusions: The contrast in complex permittivities between normal and abnormal colon tissues presented here for the first time demonstrate the potential of these measurements for tissue classification. It also opens the door to the development of a microwave endoscopic device to complement the outcomes of colonoscopy with functional tissue information., This work was supported by the Department of Universitats, Recerca i Societat de la Informacio of the Catalan Government through Llavor 2014LLAV00016 and producte 2016PROD00068 projects, La Caixa through Caixaimpulse program CI16-00058, the Spanish Comision Interministerial de Ciencia y Tecnologıa (CICYT) under projects TEC2016- 78028-C3-1-P, TEC2014-58582-R, the Spanish Agencia Estatal de Investigacion Unidad de Excelencia Maria de Maeztu (MDM-2016-0600), the Spanish Ministerio de Economıa, Industria y Competitividad, DTS17/00090 and CERCA Programme/Generalitat de Catalunya.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Capital accumulation and structural transformation

  • Bustos, Paula
  • Garber, Gabriel
  • Ponticelli, Jacopo
Several scholars argue that high agricultural productivity can retard industrial development because it draws resources toward the comparative advantage sector, agriculture. However, agricultural productivity growth can increase savings and the supply of capital, generating an expansion of the capital-intensive sector, manufacturing. We highlight this mechanism in a simple model and test its predictions in the context of a large and exogenous increase in agricultural productivity due to the adoption of genetically engineered soy in Brazil. We find that agricultural productivity growth generated an increase in savings, but these were not reinvested locally. Instead, there were capital outflows from rural areas. Capital reallocated toward urban regions, where it was invested in the industrial and service sectors. The degree of financial integration affected the speed of structural transformation. Regions that were more financially integrated with soy-producing areas through bank branch networks experienced faster growth in nonagricultural lending. Within these regions, firms with preexisting relationships with banks receiving funds from the soy area experienced faster growth in borrowing and employment., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 716388). We are also grateful to acknowledge financial support from the Fama-Miller Center at the University of Chicago and the UK Department for International Development (DFID) and the Centre for Economic Policy Research (CEPR) (PEDL Scale-Up ERG no. 3787). Paula Bustos acknowledges funding from Spain’s Ministry of Science, Innovation and Universities (grants no. ECO-2016-80411-P and MDM-2016-0684).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Event Detection System in the NEXT-White Detector

  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Simón Estévez, Ander
  • Monrabal Capilla, Francesc
  • Rodriguez-Samaniego, Javier
  • Querol-Segura, Marc
[EN] This article describes the event detection system of the NEXT-White detector, a 5 kg high pressure xenon TPC with electroluminescent amplification, located in the Laboratorio Subterráneo de Canfranc (LSC), Spain. The detector is based on a plane of photomultipliers (PMTs) for energy measurements and a silicon photomultiplier (SiPM) tracking plane for offline topological event filtering. The event detection system, based on the SRS-ATCA data acquisition system developed in the framework of the CERN RD51 collaboration, has been designed to detect multiple events based on online PMT signal energy measurements and a coincidence-detection algorithm. Implemented on FPGA, the system has been successfully running and evolving during NEXT-White operation. The event detection system brings some relevant and new functionalities in the field. A distributed double event processor has been implemented to detect simultaneously two different types of events thus allowing simultaneous calibration and physics runs. This special feature provides constant monitoring of the detector conditions, being especially relevant to the lifetime and geometrical map computations which are needed to correct high-energy physics events. Other features, like primary scintillation event rejection, or a double buffer associated with the type of event being searched, help reduce the unnecessary data throughput thus minimizing dead time and improving trigger efficiency., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT, the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FISNUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The electronics of the energy plane of the NEXT-White detector

  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Laing, A.
  • Rodriguez-Samaniego, Javier
  • Querol-Segura, Marc
  • Monrabal, Francesc
  • Gómez-Cadenas, J.J.
[EN] This paper describes the electronics of NEXT-White (NEW) detector PMT plane, a high pressure xenon TPC with electroluminescent amplification (HPXe-EL) currently operating at the Laboratorio Subterraneo de Canfranc (LSC) in Huesca, Spain. In NEXT-White the energy of the event is measured by a plane of photomultipliers (PMTs) located behind a transparent cathode. The PMTs are Hamamatsu R11410-10 chosen due to their low radioactivity. The electronics have been designed and implemented to fulfill strict requirements: an overall energy resolution below 1% and a radiopurity budget of 20 mBq unit(-1) in the chain of Bi-214. All the components and materials have been carefully screened to assure a low radioactivity level and at the same time meet the required front-end electronics specifications. In order to reduce low frequency noise effects and enhance detector safety a grounded cathode connection has been used for the PMTs. This implies an AC-coupled readout and baseline variations in the PMT signals. A detailed description of the electronics and a novel approach based on a digital baseline restoration to obtain a linear response and handle AC coupling effects is presented. The final PMT channel design has been characterized with linearity better than 0.4% and noise below 0.4mV., We acknowledge support from the following agencies and institutions: the European Research Council (ERC), Spain under the Advanced Grant 339787-NEXT; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program, Spain SEV-2014-0398 and the Maria de Maetzu Program, Spain MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT and FEDER, Spain through the program COMPETE, projects PTDC/FIS-NUC/2525/2014 and UID/FIS/04559/2013; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and de-sc0017721 (University of Texas at Arlington); and the University of Texas at Arlington. We acknowledge partial support from the European Union Horizon 2020 research and innovation programme, Spain under the Marie Sklodowska-Curie grant agreements No. 690575 and 674896. We also warmly acknowledge the Laboratorio Nazionale di Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mitigation of backgrounds from cosmogenic Xe-137 in xenon gas experiments using He-3 neutron capture

  • Rogers, L.
  • Jones, B. J. P.
  • Laing, A.
  • Pingulkar, S.
  • Smithers, B.
  • Woodruff, K.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I. J.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Benlloch-Rodríguez, J. M.
  • Borges, F. I. G. M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Xe-136 is used as the target medium for many experiments searching for 0 nu beta beta. Despite underground operation, cosmic muons that reach the laboratory can produce spallation neutrons causing activation of detector materials. A potential background that is difficult to veto using muon tagging comes in the form of Xe-137 created by the capture of neutrons on Xe-136. This isotope decays via beta decay with a half-life of 3.8 min and a Q(beta) of similar to 4.16 MeV. This work proposes and explores the concept of adding a small percentage of He-3 to xenon as a means to capture thermal neutrons and reduce the number of activations in the detector volume. When using this technique we find the contamination from Xe-137 activation can be reduced to negligible levels in tonne and multi-tonne scale high pressure gas xenon neutrinoless double beta decay experiments running at any depth in an underground laboratory., The work described was supported by the Department of Energy under Award numbers DE-SC0019054 and DE-SC0019223. The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Program for Research and Innovation Horizon 2020 (2014-2020) under the Marie Skodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Demonstration of background rejection using deep convolutional neural networks in the NEXT experiment

  • Kekic, M.
  • Adams, C.
  • Woodruff, K.
  • Renner, J.
  • Church, E.
  • Del Tutto, M.
  • Hernando Morata, J. A.
  • Gomez-Cadenas, J. J.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Convolutional neural networks (CNNs) are widely used state-of-the-art computer vision tools that are becoming increasingly popular in high-energy physics. In this paper, we attempt to understand the potential of CNNs for event classification in the NEXT experiment, which will search for neutrinoless double-beta decay in Xe-136. To do so, we demonstrate the usage of CNNs for the identification of electron-positron pair production events, which exhibit a topology similar to that of a neutrinoless double-beta decay event. These events were produced in the NEXT-White high-pressure xenon TPC using 2.6 MeV gamma rays from a Th-228 calibration source. We train a network on Monte Carlo-simulated events and show that, by applying on-the-fly data augmentation, the network can be made robust against differences between simulation and data. The use of CNNs offers significant improvement in signal efficiency and background rejection when compared to previous non-CNN-based analyses, This study used computing resources from Artemisa, co-funded by the European Union through the 2014-2020 FEDER Operative Programme of the Comunitat Valenciana, project DIFEDER/2018/048. This research used resources of the Argonne Leadership Computing Facility, which is a DOE Office of Science User Facility supported under Contract DE-AC02-06CH11357. The NEXT collaboration acknowledges support from the following agencies and institutions: Xunta de Galicia (Centro singularde investigacion de Galicia accreditation 2019-2022), by European Union ERDF, and by the "Maria de Maeztu" Units of Excellence program MDM-2016-0692 and the Spanish Research State Agency"; the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-20140398 and CEX2018-000867-S; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015 18820. JMA acknowledges support from Fundacion Bancaria "la Caixa" (ID 100010434), grant code LCF/BQ/PI19/11690012. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Data Compression in the NEXT-100 Data Acquisition System

  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Rodríguez Ponce, Jorge
  • Simón Estévez, Ander
  • Benlloch Rodríguez, José María
[EN] NEXT collaboration detectors are based on energy measured by an array of photomultipliers (PMT) and topological event filtering based on an array of silicon photomultipliers (SiPMs). The readout of the PMT sensors for low-frequency noise effects and detector safety issues requires a grounded cathode connection that makes the readout AC-couple with variations in the signal baseline. Strict detector requirements of energy resolution better than 1% FWHM require a precise baseline reconstruction that is performed offline for data analysis and detector performance characterization. Baseline variations make it inefficient to apply traditional lossy data compression techniques, such as zero-suppression, that help to minimize data throughput and, therefore, the dead time of the system. However, for the readout of the SiPM sensors with less demanding requirements in terms of accuracy, a traditional zero-suppression is currently applied with a configuration that allows for a compression ratio of around 71%. The third stage in the NEXT detectors program, the NEXT-100 detector, is a 100 kg detector that instruments approximately five times more PMT sensors and twice the number of SiPM sensors than its predecessor, the NEXT-White detector, putting more pressure in the DAQ throughput, expected to be over 900 MB/s with the current configuration, which will worsen the dead time of the acquisition data system. This paper describes the data compression techniques applied to the sensor data in the NEXT-100 detector, which reduces data throughput and minimizes dead time while maintaining the event rate to the level of its predecessor, around 50 Hz., NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Research Council (ERC) under Grant Agreement No. 101039048-GanESS; the European Union's Framework Program for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI/10.13039/501100011033 of Spain and ERDF A way of making Europe under grant RTI2018-095979, the Severo Ochoa Program grant CEX2018-000867-S and the Maria de Maeztu Program grant MDM-2016-0692; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contract number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. A.S.E acknowledges support from the Kreitman School of Advanced Graduate Studies at Ben-Gurion University and from the Marie Sklodowska-Curie grant agreement No. 101026628. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM, High gain observer with dynamic deadzone to estimate liquid water saturation in PEM fuel cells

  • Cecilia, A.
  • Costa-Castelló, R.
[EN] In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer's liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer's noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., [ES] En el campo de las pilas de combustible PEM, la gestión de agua líquida es una de las problemáticas más importantes que afectan a la eficiencia y vida útil del sistema. Las técnicas de control activo y supervisión del agua se ven limitadas por la ausencia de sensores que puedan medir la saturación de agua líquida en línea. Por eso, en este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia. Además, se modifica con una función de zona muerta autoajustable con el fin de reducir su sensibilidad al ruido en la medida. Los resultados se han validado mediante simulación numérica y experimentación. Estos muestran que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Este proyecto se ha financiado parcialmente por el proyecto DOVELAR (ref. RTI2018-096001-B-C32). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigación española a través del sello de excelencia de María de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a través de la subvención del grupo Advanced Control Systems (SAC) (2017 SGR 482). Este trabajo se ha realizado con el apoyo de ACCIÓ (Operational Program FEDER Catalunya 2014-2020) a través de REFER project (COMRDI15-1-0036-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PADC nuclear track detector for ion spectroscopy in laser-plasma acceleration

  • Seimetz, Michael
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Peñas, J.
  • Llerena, J. J.
  • Benlliure, J.
  • García López, J.
  • Millán-Callado, M. A.
[EN] The transparent polymer polyallyl-diglycol-carbonate (PADC), also known as CR-39, is widely used as detector for heavy charged particles at low fluence. It allows for detection of single protons and ions via formation of microscopic tracks after etching in NaOH or KOH solutions. PADC combines a high sensitivity and high specificity with inertness towards electromagnetic noise. Present fields of application include laser-ion acceleration, inertial confinement fusion, radiobiological studies with cell cultures, and dosimetry of nuclear fragments in particle therapy. These require precise knowledge of the energy-dependent response of PADC to different ion species. We present calibration data for a new type of detector material, Radosys RS39, to protons (0.2-3 MeV) and carbon ions (0.6-12 MeV). RS39 is less sensitive to protons than other types of PADC. Its response to carbon ions, however, is similar to other materials. Our data indicate that RS39 allows for measuring carbon ion energies up to 10 MeV only from the track diameters. In addition, it can be used for discrimination between protons and carbon ions in a single etching process., Project funded by CSIC, Grant No. 2018501082, and by the Spanish Ministerio de Ciencia, Innovacion y Universidades, project MdM-2016-0692-17-2 via a predoctoral grant of type Maria de Maeztu FPI. Nuclear track detector material and readout equipment have been provided by Radosys Ldt. (Budapest). The authors acknowledge the contributions and commitment of the CNA accelerator operators. MS would like to thank L. Ballesteros and J. Ortiz for their support with precision equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Search for Spatial Correlations of Neutrinos with Ultra-high-energy Cosmic Rays

  • Albert, A.
  • Alves, S.
  • Andre, M.
  • Anghinolfi, M.
  • Aubert,, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Bendahman, M.
  • Bertin, V.
  • Biagi, S.
  • M. Bissinger
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
[EN] For several decades, the origin of ultra-high-energy cosmic rays (UHECRs) has been an unsolved question of high- energy astrophysics. One approach for solving this puzzle is to correlate UHECRs with high-energy neutrinos, since neutrinos are a direct probe of hadronic interactions of cosmic rays and are not de¿ected by magnetic ¿elds. In this paper, we present three different approaches for correlating the arrival directions of neutrinos with the arrival directions of UHECRs. The neutrino data are provided by the IceCube Neutrino Observatory and ANTARES, while the UHECR data with energies above ~50 EeV are provided by the Pierre Auger Observatory and the Telescope Array. All experiments provide increased statistics and improved reconstructions with respect to our previous results reported in 2015. The ¿rst analysis uses a high-statistics neutrino sample optimized for point- source searches to search for excesses of neutrino clustering in the vicinity of UHECR directions. The second analysis searches for an excess of UHECRs in the direction of the highest-energy neutrinos. The third analysis searches for an excess of pairs of UHECRs and highest-energy neutrinos on different angular scales. None of the analyses have found a signi¿cant excess, and previously reported over¿uctuations are reduced in signi¿cance. Based on these results, we further constrain the neutrino ¿ux spatially correlated with UHECRs., The authors of the ANTARES collaboration acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et aux energies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Council of the President of the Russian Federation for young scientists and leading scientific schools supporting grants, Russia; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolia (refs. GRISOLIA/2018/119,/2021/192) and GenT (refs. CIDEGENT/2018/034,/2019/043,/2020/049,/2021/023) programs, Junta de Andalucia (ref. A-FQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities. The ANTARES collaboration acknowledges the significant contributions to this manuscript from Julien Aublin.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electron drift properties in high pressure gaseous xenon

  • Simon, A.
  • Felkai, R.
  • Martinez-Lema, G.
  • Monrabal, F.
  • Gonzalez-Diaz, D.
  • Sorel, M.
  • Hernando Morata, J. A.
  • Gomez-Cadenas, J. J.
  • Adams, C.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Gaseous time projection chambers (TPC) are a very attractive detector technology for particle tracking. Characterization of both drift velocity and di¿usion is of great importance to correctly assess their tracking capabilities. NEXT-White is a High Pressure Xenon gas TPC with electroluminescent ampli¿cation, a 1:2 scale model of the future NEXT-100detector, which will be dedicated to neutrinoless double beta decay searches. NEXT-White has been operating at Canfranc Underground Laboratory (LSC) since December2016. The drift parameters have been measured using 83mKr for a range of reduced drift ¿elds at two di¿erent pressure regimes, namely 7.2 bar and 9.1 bar. Theresults have been compared with Magboltz simulations. Agreement at the 5% level or better has been found for drift velocity, longitudinal di¿usion and transverse di¿usion., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT and FEDER through the program COMPETE, projects PTDC/FIS-NUC/2525/2014 and UID/FIS/04559/2013; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and de-sc0017721 (University of Texas at Arlington); and the University of Texas at Arlington. We also warmly acknowledge the Laboratorio Nazionale di Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Next White (NEW) detector

  • Monrabal, F.
  • Gomez-Cadenas, J. J.
  • Laing, A.
  • Benlloch-Rodriguez, J. M.
  • Carcel, S.
  • Carrion, J
  • Felkai, R.
  • Martinez, A.
  • Musti, M.
  • Ouero, M.
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
[EN] Conceived to host 5 kg of xenón at a pressure of 15 bar in the ¿ducial volume,the NEXTWhite (NEW)apparatus is currently the largest high pressure xenon gas TPC using electroluminescent ampli¿cation in the world. It is also a 1:2 scale model of the NEXT-100 detector scheduled to start searching for ßß0¿ decays in 136Xe in 2019. Both detectors measure the energy of the event using a plane of photomultipliers located behind a transparent cathode. They can also reconstruct the trajectories of charged tracks in the dense gas of the TPC with the help of a plane of silicon photomultipliers located behind the anode. A sophisticated gas system, common to both detectors, allows the high gas purity needed to guarantee a long electron lifetime. NEXT-White has been operating since October 2017 at the Canfranc Underground Laboratory (LSC), in Spain. This paper describes the detector and associated infrastructures., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT and FEDER through the program COMPETE, projects PTDC/FIS-NUC/2525/2014 and UID/FIS/04559/2013; the U.S. Department of Energy under contract numbers DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0017721 (University of Texas at Arlington), and DE-AC02-06CH11357 (Argonne National Laboratory); and the University of Texas at Arlington. We also warmly acknowledge the Laboratorio Nazionale di Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electroluminescence TPCs at the thermal diffusion limit

  • Henriques, C. A. O.
  • Monteiro, C. M. B.
  • Gonzalez-Diaz, D.
  • Azevedo, C. D. R.
  • Freitas, E. D. C.
  • Mano, R. D. P.
  • Jorge, M. R.
  • Fernandes, A. F. M.
  • Gomez-Cadenas, J. J.
  • Fernandes, L. M. P.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT experiment aims at searching for the hypothetical neutrinoless double-beta decay from the 136Xe isotope using a high-purity xenon TPC. Efficient discrimination of the events through pattern recognition of the topology of primary ionisation tracks is a major requirement for the experiment. However, it is limited by the diffusion of electrons. It is known that the addition of a small fraction of a molecular gas to xenon reduces electron diffusion. On the other hand, the electroluminescence (EL) yield drops and the achievable energy resolution may be compromised. We have studied the effect of adding several molecular gases to xenon (CO2, CH4 and CF4) on the EL yield and energy resolution obtained in a small prototype of driftless gas proportional scintillation counter. We have compared our results on the scintillation characteristics (EL yield and energy resolution) with a microscopic simulation, obtaining the diffusion coefficients in those conditions as well. Accordingly, electron diffusion may be reduced from about 10 mm/ sqrt(¿) for pure xenon down to 2.5 mm/sqrt(m) using additive concentrations of about 0.05%, 0.2% and 0.02% for CO2, CH4 and CF4, respectively. Our results show that CF4 admixtures present the highest EL yield in those conditions, but very poor energy resolution as a result of huge fluctuations observed in the EL formation. CH4 presents the best energy resolution despite the EL yield being the lowest. The results obtained with xenon admixtures are extrapolated to the operational conditions of the NEXT-100 TPC. CO2 and CH4 show potential as molecular additives in a large xenon TPC. While CO2 has some operational constraints, making it difficult to be used in a large TPC, CH4 shows the best performance and stability as molecular additive to be used in the NEXT-100 TPC, with an extrapolated energy resolution of 0.4% at 2.45 MeV for concentrations below 0.4%, which is only slightly worse than the one obtained for pure xenon. We demonstrate the possibility to have an electroluminescence TPC operating very close to the thermal diffusion limit without jeopardizing the TPC performance, if CO2 or CH4 are chosen as additives., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-AC02-06CH11357 (Argonne National Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0017721 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dependence of polytetrafluoroethylene reflectance on thickness at visible and ultraviolet wavelengths in air

  • Ghosh, S.
  • Haefner, J.
  • Martín-Albo, J.
  • Guenette, R.
  • Li, X.
  • Loya Villalpando, A.A.
  • Burch, C.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Benlloch-Rodríguez, J.M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Polytetrafluoroethylene (PTFE) is an excellent diffuse reflector widely used in light collection systems for particle physics experiments. However, the reflectance of PTFE is a function of its thickness. In this work, we investigate this dependence in air for light of wavelengths 260 nm and 450 nm using two complementary methods. We find that PTFE reflectance for thicknesses from 5 mm to 10 mm ranges from 92.5% to 94.5% at 450 nm, and from 90.0% to 92.0% at 260 nm We also see that the reflectance of PIFE of a given thickness can vary by as much as 2.7% within the same piece of material. Finally, we show that placing a specular reflector behind the PTFE can recover the loss of reflectance in the visible without introducing a specular component in the reflectance., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-2014-0398 and CEX2018-000867-S, and the Maria de Maeztu Program MDM-2016-0692; the Generalitat Valenciana under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under contracts No. DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC0207CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington (USA). DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC2015-18820. JM-A acknowledges support from Fundacion Bancaria "la Caixa" (ID 100010434), grant code LCF/BQ/PI19/11690012. Finally, we thank Brendon Bullard, Paolo Giromini and Neeraj Tata for helpful discussions and assistance with preliminary measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Demonstration of the event identification capabilities of the NEXT-White detector

  • Ferrario, Paola
  • Benlloch-Rodríguez, J.M.
  • Díaz López, G.
  • Hernando Morata, J.A.
  • Kekic, M.
  • Renner, J.
  • Usón, A.
  • Gómez-Cadenas, J.J.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] In experiments searching for neutrinoless double-beta decay, the possibility of identifying the two emitted electrons is a powerful tool in rejecting background events and therefore improving the overall sensitivity of the experiment. In this paper we present the first measurement of the efficiency of a cut based on the different event signatures of double and single electron tracks, using the data of the NEXT-White detector, the first detector of the NEXT experiment operating underground. Using a 228Th calibration source to produce signal-like and background-like events with energies near 1.6 MeV, a signal efficiency of 71.6 ± 1.5 stat ± 0.3 sys% for a background acceptance of 20.6 ± 0.4 stat ± 0.3 sys% is found, in good agreement with Monte Carlo simulations. An extrapolation to the energy region of the neutrinoless double beta decay by means of Monte Carlo simulations is also carried out, and the results obtained show an improvement in background rejection over those obtained at lower energies., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/FBD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of LTCC-Based Dielectric Flat Lens Antennas and Switched-Beam Arrays for Future 5G Millimeter-Wave Communication Systems

  • Imbert, Marc
  • Romeu, Jordi
  • Martinez-Ingles, Maria-Teresa
  • Molina-García-Pardo, José María
  • Jofre, Lluis
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] This paper presents the design, low-temperature co-fired ceramics (LTCC) fabrication, and full experimental verification of novel dielectric flat lens antennas for future high data rate 5G wireless communication systems in the 60 GHz band. We introduce and practically completely evaluate and compare the performance of three different inhomogeneous gradient-index dielectric lenses with the effective parameters circularly and cylindrically distributed. These lenses, despite their planar profile antenna configuration, allow full 2-D beam scanning of high-gain radiation beams. A time-domain spectroscopy system is used to practically evaluate the permittivity profile achieved with the LTCC manufacturing process, obtaining very good results to confirm the viability of fabricating inhomogeneous flat lenses in a mass production technology. Then, the lenses performance is evaluated in terms of radiation pattern parameters, maximum gain, beam scanning, bandwidth performance, efficiencies, and impedance matching in the whole frequency band of interest. Finally, the performance of the three lenses is also experimentally evaluated and compared to a single omni-directional antenna and to a ten-element uniform linear array of omni-directional antennas in real 60 GHz wireless personal area network indoor line-of-sight (LOS) and obstructed-LOS environments, obtaining interesting and promising remarkable results in terms of measured received power and root-mean-square delay spread. At the end of this paper, an innovative switched-beam antenna array concept based on the presented cylindrically distributed effective parameters lens is also introduced and completely evaluated, confirming the potential applicability of the proposed antenna solution for future 5G wireless millimeter-wave communication system., This work was supported in part by the Spanish Inter-Ministerial Commission on Science and Technology (CICYT) under Projects TEC2013-47360-C3-1-P, TEC2013-47360-C3-2-P, and TEC2016-78028-C3-1-P, by FEDER and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, which is financed by the Agenda Estatal de Investigacion, Spain, and by the "Ministerio de Economia" through the FPI fellowship program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental Setup for Irradiation of Cell Cultures at L2A2

  • Torralba, Alberto
  • Palenciano-Castro, Lidia
  • Reija, Alicia
  • Rigla, Juan Pablo
  • Peñas, Juan
  • Llerena, Juan José
  • Contreras-Martinez, Ramiro
  • Benlliure, José
  • Vega, Ana
  • Aguado-Barrera, Miguel Elías
  • Ruiz, Camilo
  • Seimetz, Michael
[EN] Laser-plasma proton sources and their applications to preclinical research has become a very active field of research in recent years. In addition to their small dimensions as compared to classical ion accelerators, they offer the possibility to study the biological effects of ultra-short particle bunches and the correspondingly high dose rates. We report on the design of an experimental setup for the irradiation of cell cultures at the L2A2 laboratory at the University of Santiago de Compostela, making use of a 1.2 J Ti: Sapphire laser with a 10 Hz repetition rate. Our setup comprises a proton energy separator consisting of two antiparallel magnetic fields realized by a set of permanent magnets. It allows for selecting a narrow energy window around an adaptable design value of 5 MeV out of the initially broad spectrum typical for Target Normal Sheath Acceleration (TNSA). At the same time, unwanted electrons and X-rays are segregated from the protons. This part of the setup is located inside the target vessel of the L2A2 laser. A subsequent vacuum flange sealed with a thin kapton window allows for particle passage to external sample irradiation. A combination of passive detector materials and real-time monitors is applied for measurement of the deposited radiation dose. A critical point of this interdisciplinary project is the manipulation of biological samples under well-controlled, sterile conditions. Cell cultures are prepared in sealed flasks with an ultra-thin entrance window and analysed at the nearby Fundacion Publica Galega Medicina Xenomica and IDIS. The first trials will be centred at the quantification of DNA double-strand breaks as a function of radiation dose., Projects RTI2018-101578-B-C21 and RTI2018-101578-B-C22 are funded by MCIN/AEI /10.13039/501100011033 and by FEDER "Una manera de hacer Europa". Project AICO/2020/207 is funded by Generalitat Valenciana. Supports PEJ2018-002035-A and PEJ2018-002037-A are financed by AEI and "El FSE invierte en tu futuro". Additional funding is by FPI predoctoral grant BES-2017-08917 and Unidad de Excelencia Maria de Maeztu, MdM-2016-0692-17-2. Action is co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022 and IDIFEDER/2021/004). FPGMX-IDIS research is partially supported by the Spanish Instituto de Salud Carlos III (ISCIII) funding, which is an initiative of the Spanish Ministry of Economy and Innovation partially supported by European Regional Development FEDER Funds (INT20/00071, PI19/01424, AC18/00117) and through the Autonomous Government of Galicia (Consolidation and structuring program: IN607B) given to A. Vega.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sensitivity of the NEXT experiment to 124-Xe double electron capture

  • Martinez-Lema, G.
  • Martinez-Vara, M.
  • Sorel, M.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Borges, F. I. G. M.
  • Byrnes, N.
  • Carcel, S.
  • Carrión, J. V.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Double electron capture by proton-rich nuclei is a second-order nuclear process analogous to double beta decay. Despite their similarities, the decay signature is quite di erent, potentially providing a new channel to measure the hypothesized neutrinoless mode of these decays. The Standard-Model-allowed two-neutrino double electron capture has been predicted for a number of isotopes, but only observed in 78Kr, 130Ba and, recently, 124Xe. The sensitivity to this decay establishes a benchmark for the ultimate experimental goal, namely the potential to discover also the lepton-number-violating neutrinoless version of this process. Here we report on the current sensitivity of the NEXT-White detector to 124Xe 2 ECEC and on the extrapolation to NEXT-100. Using simulated data for the 2 ECEC signal and real data from NEXT-White operated with 124Xe-depleted gas as background, we de ne an optimal event selection that maximizes the NEXT-White sensitivity. We estimate that, for NEXT-100 operated with xenon gas isotopically enriched with 1 kg of 124Xe and for a 5-year run, a sensitivity to the two-neutroni double electron capture half-life of 6x10exp22 years (at 90% con dence level) or better can be reached., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-2014-0398 and CEX2018-000867-S, and the Maria de Maeztu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-diffusion Xe-He gas mixtures for rare-event detection: electroluminescence yield

  • Fernandes, A.F.M.
  • Henriques, C.A.O.
  • Mano, R.D.P.
  • González-Díaz, D.
  • Azevedo, C.D.R.
  • Silva, P.A.O.C.
  • Gómez-Cadenas, J.J.
  • Freitas, E.D.C.
  • Fernandes, L.M.P.
  • Monteiro, C.M.B.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] High pressure xenon Time Projection Chambers (TPC) based on secondary scintillation (electroluminescence) signal amplification are being proposed for rare event detection such as directional dark matter, double electron capture and double beta decay detection. The discrimination of the rare event through the topological signature of primary ionisation trails is a major asset for this type of TPC when compared to single liquid or double-phase TPCs, limited mainly by the high electron diffusion in pure xenon. Helium admixtures with xenon can be an attractive solution to reduce the electron diffu- sion significantly, improving the discrimination efficiency of these optical TPCs. We have measured the electroluminescence (EL) yield of Xe-He mixtures, in the range of 0 to 30% He and demonstrated the small impact on the EL yield of the addition of helium to pure xenon. For a typical reduced electric field of 2.5 kV/cm/bar in the EL region, the EL yield is lowered by similar to 2%, 3%, 6% and 10% for 10%, 15%, 20% and 30% of helium concentration, respectively. This decrease is less than what has been obtained from the most recent simulation framework in the literature. The impact of the addition of helium on EL statistical fluctuations is negligible, within the experimental uncertainties. The present results are an important benchmark for the simulation tools to be applied to future optical TPCs based on Xe-He mixtures., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economa y Competitividad of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Mara de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015; the U.S. Department of Energy under contracts number DEAC02-06CH11357 (Argonne National Laboratory), DE-AC0207CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A& M) and DE-SC0019223/DESC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sensitivity of a tonne-scale NEXT detector for neutrinoless double-beta decay searches

  • Adams, C.
  • Alvarez, V.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Borges, F. I. G. M.
  • Byrnes, N.
  • Carcel, S.
  • Carrión, J.V.
  • Cebrian, S.
  • Church, E.
  • Conde, C. A. N.
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The Neutrino Experiment with a Xenon TPC (NEXT) searches for the neutrinoless double-beta (0 nu beta beta) decay of Xe-136 using high-pressure xenon gas TPCs with electroluminescent amplification. A scaled-up version of this technology with about 1 tonne of enriched xenon could reach in less than 5 years of operation a sensitivity to the half-life of 0 nu beta beta decay better than 10(27) years, improving the current limits by at least one order of magnitude. This prediction is based on a well-understood background model dominated by radiogenic sources. The detector concept presented here represents a first step on a compelling path towards sensitivity to the parameter space defined by the inverted ordering of neutrino masses, and beyond., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-2014-0398 and CEX2018-000867-S, and the Maria de Maeztu Program MDM2016-0692; the Generalitat Valenciana of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC0207CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges support from the Ramon y Cajal program (Spain) under contract number RYC-2015-18820. JM-A acknowledges support from Fundacion Bancaria la Caixa (ID 100010434), grant code LCF/BQ/PI19/11690012, and from the Plan GenT program of the Generalitat Valenciana, grant code CIDEGENT/2019/049. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Neutral Bremsstrahlung Emission in Xenon Unveiled

  • Henriques, C.A.O.
  • Amedo, P.
  • Teixeira, J. M. R.
  • González-Díaz, D.
  • Azevedo, C.D.R.
  • Para, A.
  • Martín-Albo,J.
  • Saa Hernandez, A.
  • Gómez-Cadenas, J. J.
  • Nygren, D. R.
  • Monteiro, C.M.B.
  • Adams, C.
  • Álvarez, V.
  • Arazi, L.
  • Arnquist, I.J.
  • Lopez-March, N.
  • Rodríguez, J.
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] We present evidence of non-excimer-based secondary scintillation in gaseous xenon, obtained using both the NEXT-White time projection chamber (TPC) and a dedicated setup. Detailed comparison with first-principle calculations allows us to assign this scintillation mechanism to neutral bremsstrahlung (NBrS), a process that is postulated to exist in xenon that has been largely overlooked., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Advanced Grant No. 339787-NEXT; the European Unions Framework Program for Research and Innovation Horizon 2020 (20142020) under Grant Agreements No. 674896, No. 690575, and No. 740055; the Ministerio de Economa y Competitividad and the Ministerio de Ciencia, Innovacin y Universidades of Spain under Grants No. FIS2014-53371-C04 and No. RTI2018-095979, the Severo Ochoa Program Grants No. SEV-2014-0398 and No. CEX2018-000867-S, and the Mara de Maeztu Program MDM-2016-0692; the Generalitat Valenciana under Grants No. PROMETEO/2016/120 and No. SEJI/2017/011; the Portuguese FCT under Project No. PTDC/FIS-NUC/3933/2021 and under Project No. UIDP/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under Contracts No. DE-AC02-06CH11357 (Argonne National Laboratory), No. DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), No. DE-FG02-13ER42020 (Texas A&M), and No. DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington (USA). D. G.-D. acknowledges Ramon y Cajal program (Spain) under Contract No. RYC- 2015-18820. J. M.-A. acknowledges support from Fundacin Bancaria la Caixa (ID 100010434), Grant No. LCF/BQ/PI19/11690012. We would like to thank Lorenzo Muniz for insightful discussions on the subtleties of electron transport in gases.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Radiogenic backgrounds in the NEXT double beta decay experiment

  • Novella, P.
  • Palmeiro, B.
  • Sorel, M.
  • Usón, A.
  • Ferrario, P.
  • Gómez-Cadenas, J. J.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Benlloch-Rodríguez, J. M.
  • Borges, F. I. G. M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Natural radioactivity represents one of the main backgrounds in the search for neutrinoless double beta decay. Within the NEXT physics program, the radioactivity- induced backgrounds are measured with the NEXT-White detector. Data from 37.9 days of low-background operations at the Laboratorio Subterraneo de Canfranc with xenon depleted in Xe-136 are analyzed to derive a total background rate of (0.84 +/- 0.02) mHz above 1000 keV. The comparison of data samples with and without the use of the radon abatement system demonstrates that the contribution of airborne-Rn is negligible. A radiogenic background model is built upon the extensive radiopurity screening campaign conducted by the NEXT collaboration. A spectral fit to this model yields the specific contributions of Co-60, K-40, Bi-214 and Tl-208 to the total background rate, as well as their location in the detector volumes. The results are used to evaluate the impact of the radiogenic backgrounds in the double beta decay analyses, after the application of topological cuts that reduce the total rate to (0.25 +/- 0.01) mHz. Based on the best-fit background model, the NEXT-White median sensitivity to the two-neutrino double beta decay is found to be 3.5 sigma after 1 year of data taking. The background measurement in a Q(beta beta)+/- 100 keV energy window validates the best-fit background model also for the neutrinoless double beta decay search with NEXT-100. Only one event is found, while the model expectation is (0.75 +/- 0.12) events., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Análisis y diseño de sistemas lineales con parámetros variantes utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem S.
  • Nejjari, Fatiha
  • Puig, Vicenç
[EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H∞ performance and guaranteed quadratic cost, as well as different control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., [ES] En este artículo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H∞ garantizado y el coste cuadrático garantizado, así como también diferentes estructuras de control, tales como el control por realimentación de estado, el control por realimentación de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigación (AEI) mediante el sello de excelencia científica María de Maetzu al IRI (ref. MDM-2016-0656),la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019),y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Measurement of the Xe 136 two-neutrino double -decay half-life via direct background subtraction in NEXT

  • Novella, P.
  • Sorel, M.
  • Usón, A.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Ayet, S.
  • Azevedo, D.C.R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Lopez-March, N.
  • Rodríguez, J.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] We report a measurement of the half-life of the 136Xe two-neutrino double-ß decay performed with a novel direct-background-subtraction technique. The analysis relies on the data collected with the NEXT-White detector operated with 136Xe-enriched and 136Xe-depleted xenon, as well as on the topology of double-electron tracks. With a fiducial mass of only 3.5 kg of Xe, a half-life of 2.34+0.80(stat)+0.30(sys)×1021 yr is derived from ¿0.46 ¿0.17 the background-subtracted energy spectrum. The presented technique demonstrates the feasibility of unique background-model-independent neutrinoless double-ß-decay searches., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant No. 957202-HIDDEN; the MCIN/AEI/10.13039/501100011033 of Spain and ERDF "A way of making Europe" under Grant No. RTI2018-095979, the Severo Ochoa Program Grant No. CEX2018-000867-S, and the Maria de Maeztu Program Grant No. MDM-2016-0692; the Generalitat Valenciana of Spain under Grants No. PROMETEO/2021/087 and No. CIDEGENT/2019/049; the Portuguese FCT under Project No. UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under Grants No. 877040 and No. 877041; the U.S. Department of Energy under Contracts No. DE-AC02-06CH11357 (Argonne National Laboratory), No. DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), No. DE-FG02-13ER42020 (Texas A&M), No. DE-SC0019054 (Texas Arlington), and No. DE-SC0019223 (Arlington, TX); the U.S. National Science Foundation under Grant No. CHE 2004111; and the Robert A. Welch Foundation under Grant No. Y-203120200401. D.G.D. acknowledges support from the Ramon y Cajal program (Spain) under Contract No. RYC-2015-18820. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Production of carbon-11 for PET preclinical imaging using a high-repetition rate laser-driven proton source

  • Peñas, Juan
  • Alejo, Aaron
  • Bembibre, Adrian
  • Apiñaniz, Jon Imanol
  • García-García, Enrique
  • Guerrero, Carlos
  • Henares, José Luis
  • Hernández-Palmero, Irene
  • Méndez, Cruz
  • Millán-Callado, María Ángeles
  • Puyuelo-Valdés, Pilar
  • Benlliure, José
  • Seimetz, Michael
[EN] Most advanced medical imaging techniques, such as positron-emission tomography (PET), require tracers that are produced in conventional particle accelerators. This paper focuses on the evaluation of a potential alternative technology based on laser-driven ion acceleration for the production of radioisotopes for PET imaging. We report for the frst time the use of a high-repetition rate, ultraintense laser system for the production of carbon-11 in multi-shot operation. Proton bunches with energies up to 10¿14 MeV were systematically accelerated in long series at pulse rates between 0.1 and 1 Hz using a PW-class laser. These protons were used to activate a boron target via the 11B(p,n)11C nuclear reaction. A peak activity of 234 kBq was obtained in multi-shot operation with laser pulses with an energy of 25 J. Signifcant carbon-11 production was also achieved for lower pulse energies. The experimental carbon-11 activities measured in this work are comparable to the levels required for preclinical PET, which would be feasible by operating at the repetition rate of current state-of-theart technology (10 Hz). The scalability of next-generation laser-driven accelerators in terms of this parameter for sustained operation over time could increase these overall levels into the clinical PET range., This work has received financial support by the Maria de Maetzu Units of Excellence program MDM-2016-0692-17-2, and by the Spanish Ministerio de Ciencia, Innovacion y Universidades under RTI2018-098117-B-C21, RTI2018-101578-B-C21, RTI2018-101578-B-C22, and FPI predoctoral BES-2017-08917 grants, and the Xunta de Galicia grants GRC ED431C 2017/54 and ED431F2023/21. It also was supported by Generalitat Valenciana, grant AICO/2020/207. Action co-financied by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER). This work was supported by 'la Caixa' Foundation (ID 100010434) [fellowship code LCF/BQ/PI20/11760027], and grant RYC2021-032654-I funded by MCIN, AEI and by 'European Union NextGenerationEU'.
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

The effect of short-term rentals on house prices and residential mobility: evidence from Madrid

  • Chaves-Fonseca, Cayrua
[eng] This paper studies the effects of Airbnb on residential mobility and housing prices in Madrid between 2010 and 2018. To identify causal effects, I exploit a neighborhood-year panel and a shift-share instrumental variable strategy based on spatial variation in tourist attractiveness and the rapid expansion of the platform. I find that an increase of 100 entire-home Airbnb listings in a neighborhood reduces annual residential inflows by approximately 50 individuals (2% of the mean), has no significant effect on outflows, and increases housing prices by 2%. A causal mediation analysis suggests that the effect of Airbnb on residential inflows operates primarily through its impact on housing prices. Consistent with this mechanism, the reduction in inflows is concentrated among individuals without a college degree. Overall, these findings imply that short-term rental platforms shape neighborhood dynamics not only through housing prices but also by affecting residential mobility patterns.
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

Culture and social influence: Evidence from online reviews

  • Chaves-Fonseca, Cayrua
[eng] Research based on surveys and lab experiments indicates that people in more individualistic cultures are less likely to conform to the opinions of others. However, it remains unclear how well these findings generalize to real-world settings. This paper examines how culture shapes social influence in the context of online consumer reviews. By leveraging discontinuities in Tripadvisor’s display of average ratings, I estimate how reviewers from different countries respond to the average opinion of prior consumers. When a restaurant’s displayed average rating increases by 0.5 stars, reviewers from less individualistic cultures give ratings about 0.1 stars higher. This conformity effect declines with individualism and disappears entirely among reviewers from the most individualistic cultures. The pattern is not explained by differences in observable reviewer characteristics or by country-level socioeconomic factors correlated with individualism, such as income or religion. These findings highlight that cultural values shape user behavior on online review platforms and may ultimately affect the accuracy of the information these systems aggregate.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth and size control during development

  • Vollmer, Jannik
  • Casares, Fernando
  • Iber, Dagmar
The size and shape of organs are characteristic for each species. Even when organisms develop to different sizes due to varying environmental conditions, such as nutrition, organ size follows species-specific rules of proportionality to the rest of the body, a phenomenon referred to as allometry. Therefore, for a given environment, organs stop growth at a predictable size set by the species's genotype. How do organs stop growth? How can related species give rise to organs of strikingly different size? No definitive answer has been given to date. One of the major models for the studies of growth termination is the vinegar fly Drosophila melanogaster. Therefore, this review will focus mostly on work carried out in Drosophila to try to tease apart potential mechanisms and identify routes for further investigation. One general rule, found across the animal kingdom, is that the rate of growth declines with developmental time. Therefore, answers to the problem of growth termination should explain this seemingly universal fact. In addition, growth termination is intimately related to the problems of robustness (i.e. precision) and plasticity in organ size, symmetric and asymmetric organ development, and of how the 'target' size depends on extrinsic, environmental factors., This work has been supported through grants BFU2015-66040-P and María de Maeztu Unit of Excellence MDM-2016-0687 (MINECO, Spain) to F.C. and by an SIB Fellowship to J.V.., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Teaching, analyzing, designing and interactively simulating sliding mode control

  • Costa Castelló, Ramon
  • Carrero, Niliana
  • Dormido, Sebastián
  • Fossas-Colet, Enric
This paper introduces an interactive methodology to analize, design, and simulate sliding model controllers for R, linear systems. This paper reviews sliding mode basic concepts and design methodologies and describes an interactive tool which has been developed to support teaching in this field. The tool helps students by generating a nice graphical and interactive display of most relevant concepts. This fact can be used so that students build their own intuition about the role of different parameters in a sliding mode controller. Described application has been coded with Sysquake using an event-driven solver technique. The Sysquake allows using precise integration methods in real time and handling interactivity in a simple manner., This work was supported in part by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) under Project DPI2012-31303 and Project DPI2015-69286-C3-2-R, in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) Group under Grant 2017 SGR 482., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evolution of embryonic cis-regulatory landscapes between divergent Phallusia and Ciona ascidians

  • Madgwick, Alicia
  • Magri, Marta Silvia
  • Dantec, Christelle
  • Gailly, Damien
  • Fiuza, Ulla-Maj
  • Guignard, Léo
  • Hettinger, Sabrina
  • Gómez-Skarmeta, José Luis
  • Lemaire, Patrick
Ascidian species of the Phallusia and Ciona genera are distantly related, their last common ancestor dating several hundred million years ago. Although their genome sequences have extensively diverged since this radiation, Phallusia and Ciona species share almost identical early morphogenesis and stereotyped cell lineages. Here, we explored the evolution of transcriptional control between P. mammillata and C. robusta. We combined genome-wide mapping of open chromatin regions in both species with a comparative analysis of the regulatory sequences of a test set of 10 pairs of orthologous early regulatory genes with conserved expression patterns. We find that ascidian chromatin accessibility landscapes obey similar rules as in other metazoa. Open-chromatin regions are short, highly conserved within each genus and cluster around regulatory genes. The dynamics of chromatin accessibility and closest-gene expression are strongly correlated during early embryogenesis. Open-chromatin regions are highly enriched in cis-regulatory elements: 73% of 49 open chromatin regions around our test genes behaved as either distal enhancers or proximal enhancer/promoters following electroporation in Phallusia eggs. Analysis of this datasets suggests a pervasive use in ascidians of “shadow” enhancers with partially overlapping activities. Cross-species electroporations point to a deep conservation of both the trans-regulatory logic between these distantly-related ascidians and the cis-regulatory activities of individual enhancers. Finally, we found that the relative order and approximate distance to the transcription start site of open chromatin regions can be conserved between Ciona and Phallusia species despite extensive sequence divergence, a property that can be used to identify orthologous enhancers, whose regulatory activity can partially diverge., PL's lab was supported by grants from the Agence Nationale pour la Recherche (TED project, ANR-13-BSV2–0011). JLG-S's lab was funded by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No's ERC-AdG-LS8), the Spanish Ministerio de Economía y Competitividad (BFU2016-74961-P and BFU2014-55738), the ‘Unidad de Excelencia María de Maetzu 2017–2021′ (MDM-2016-0687) to the Department of Gene Regulation and Morphogenesis of CABD), and the Andalusian Government (BIO-396). AM was a PhD student of the University of Montpellier, supported successively by the EpiGenMed Laboratory of excellence and FRM (FDT20160435698). MSM was a PhD student from the University Pablo de Olavide supported by the Spanish Ministerio de Economía y Competitividad, and by an EMBO short-term fellowship to visit PL's laboratory. DG and SH were supported by TED. UMF and LG were post-doctoral fellows supported by the FRM (SPF20120523969) and HHMI, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boron nitride nanoresonators for Phonon-Enhanced molecular vibrational spectroscopy at the strong coupling limit

  • Autore, Marta
  • Li, Peining
  • Dolado, Irene
  • Alfaro-Mozaz, Francisco J.
  • Esteban, Ruben
  • Atxabal, Ainhoa
  • Casanova, Félix
  • Hueso, Luis E.
  • Alonso-González, Pablo
  • Aizpurua, Javier
  • Nikitin, Alexey Y.
  • Vélez, Saül
  • Hillenbrand, Rainer
Enhanced light-matter interactions are the basis of surface-enhanced infrared absorption (SEIRA) spectroscopy, and conventionally rely on plasmonic materials and their capability to focus light to nanoscale spot sizes. Phonon polariton nanoresonators made of polar crystals could represent an interesting alternative, since they exhibit large quality factors, which go far beyond those of their plasmonic counterparts. The recent emergence of van der Waals crystals enables the fabrication of high-quality nanophotonic resonators based on phonon polaritons, as reported for the prototypical infrared-phononic material hexagonal boron nitride (h-BN). In this work we use, for the first time, phonon-polariton-resonant h-BN ribbons for SEIRA spectroscopy of small amounts of organic molecules in Fourier transform infrared spectroscopy. Strikingly, the interaction between phonon polaritons and molecular vibrations reaches experimentally the onset of the strong coupling regime, while numerical simulations predict that vibrational strong coupling can be fully achieved. Phonon polariton nanoresonators thus could become a viable platform for sensing, local control of chemical reactivity and infrared quantum cavity optics experiments., We also acknowledge support from the European Commission under the Graphene Flagship (GrapheneCore1, Grant no. 696656), the Marie SklodowskaCurie individual fellowship (SGPCM-705960), the Spanish Ministry of Economy and Competitiveness (Maria de Maetzu Units of Excellence Programme MDM-2016-0618 and national projects FIS2014-60195-JIN, MAT2014-53432- C5-4-R, MAT2015-65525-R, MAT2015-65159-R, FIS2016-80174-P, MAT2017- 88358-C3-3-R), the Basque government (PhD fellowship PRE-2016-1-0150, PRE-2016-2-0025), the Department of Industry of the Basque Government (ELKARTEK project MICRO4FA), the Regional Council of Gipuzkoa (project no. 100/16) and the ERC starting grant 715496, 2DNANOPTICA., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic properties of substitutionally boron-doped graphene nanoribbons on a Au(111) surface

  • Carbonell, Eduard
  • Garcia-Lekue, Aran
  • Corso, Martina
  • Vasseur, Guillaume
  • Brandimarte, Pedro
  • Lobo-Checa, Jorge
  • Oteyza, Dimas G. de
  • Li, Jingcheng
  • Kawai, Shigeki
  • Saito, Shohei
  • Yamaguchi, Shigehiro
  • Ortega, J. Enrique
  • Sánchez-Portal, Daniel
  • Pascual, José I.
High-quality graphene nanoribbons (GNRs) grown by on-surface synthesis strategies with atomic precision can be controllably doped by inserting heteroatoms or chemical groups in the molecular precursors. Here, we study the electronic structure of armchair GNRs substitutionally doped with di-boron moieties at the center, through a combination of scanning tunneling spectroscopy, angle-resolved photoemission, and density functional theory simulations. Boron atoms appear with a small displacement toward the surface, signaling their stronger interactions with the metal. We find two boron-rich flat bands emerging as impurity states inside the GNR band gap, one of them particularly broadened after its hybridization with the gold surface states. In addition, the boron atoms shift the conduction and valence bands of the pristine GNR away from the gap edge and leave unaffected the bands above and below, which become the new frontier bands and have a negligible boron character. This is due to the selective mixing of boron states with GNR bands according to their symmetry. Our results depict that the GNR band structure can be tuned by modifying the separation between di-boron moieties., We acknowledge financial support from the Basque Government (Departamento de Industria, grant no. PI-2015-1-42, and Departamento de Educación and UPV/EHU, grant no. IT-756-13), the Spanish Ministerio de Economía y Competitividad (grant nos. MAT2016-78293-C6, FIS2015-62538-ERC, FIS2017-83780-P), the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618), the European Research Council (grant agreement no. 635919), and the European Regional Development Fund., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface-enhanced molecular electron energy loss spectroscopy

  • Konečná, Andrea
  • Neuman, Tomáš
  • Aizpurua, Javier
  • Hillenbrand, Rainer
Electron energy loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) is becoming an important technique in spatially resolved spectral characterization of optical and vibrational properties of matter at the nanoscale. EELS has played a significant role in understanding localized polaritonic excitations in nanoantennas and also allows for studying molecular excitations in nanoconfined samples. Here we theoretically describe the interaction of a localized electron beam with molecule-covered polaritonic nanoantennas, and propose the concept of surface-enhanced molecular EELS exploiting the electromagnetic coupling between the nanoantenna and the molecular sample. Particularly, we study plasmonic and infrared phononic antennas covered by molecular layers, exhibiting either an excitonic or vibrational response. We demonstrate that EEL spectra of these molecule-antenna coupled systems exhibit Fano-like or strong coupling features, similar to the ones observed in far-field optical and infrared spectroscopy. EELS offers the advantage to acquire spectral information with nanoscale spatial resolution, and importantly, to control the antenna-molecule coupling on demand. Considering ongoing instrumental developments, EELS in STEM shows the potential to become a powerful tool for fundamental studies of molecules that are naturally or intentionally located on nanostructures supporting localized plasmon or phonon polaritons. Surface-enhanced EELS might also enable STEM-EELS applications such as remote- and thus damage-free-sensing of the excitonic and vibrational response of molecules, quantum dots, or 2D materials., This work is supported by the Spanish Ministry of Economy, Industry, and Competitiveness (National Projects MAT2015-65525-R, FIS2016-80174-P, and the Project MDM-2016-0618 of the Maria de Maeztu Units of Excellence Programme). A.K. further acknowledges Thermo Fisher Scientific and Czechoslovak Microscopic Society scholarship for young researchers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Survival of spin state in magnetic porphyrins contacted by graphene nanoribbons

  • Li, Jingcheng
  • Merino-Díez, Nestor
  • Carbonell, Eduard
  • Vilas-Varela, Manuel
  • Oteyza, Dimas G. de
  • Peña, Diego
  • Corso, Martina
  • Pascual, José I.
We report on the construction and magnetic characterization of a fully functional hybrid molecular system composed of a single magnetic porphyrin molecule bonded to graphene nanoribbons with atomically precise contacts. We use on-surface synthesis to direct the hybrid creation by combining two molecular precursors on a gold surface. High-resolution imaging with a scanning tunneling microscope finds that the porphyrin core fuses into the graphene nanoribbons through the formation of new carbon rings at chemically predefined positions. These ensure the stability of the hybrid and the extension of the conjugated character of the ribbon into the molecule. By means of inelastic tunneling spectroscopy, we prove the survival of the magnetic functionality of the contacted porphyrin. The molecular spin appears unaffected by the graphenoid electrodes, and we simply observe that the magnetic anisotropy appears modified depending on the precise structure of the contacts., We acknowledge the financial support from Spanish Agencia Estatal de Investigación (AEI) (project nos. MAT2016-78293-C6 and FIS2015-62538-ERC, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), the Basque Government (Department Industry, grant no. PI-2015-1-42), the European project PAMS (610446), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016 to 2019, ED431G/09), the European Research Council (grant agreement no. 635919), and the European Regional Development Fund. A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vibrational electron energy loss spectroscopy in truncated dielectric slabs

  • Konečná, Andrea
  • Venkataraman, Latha
  • March, Katia
  • Crozier, Peter A.
  • Hillenbrand, Rainer
  • Rez, Peter
  • Aizpurua, Javier
Specially designed instrumentation for electron energy loss spectroscopy (EELS) in a scanning transmission electron microscope makes it possible to probe very low-loss excitations in matter with a focused electron beam. Here we study the nanoscale interaction of fast electrons with optical phonon modes in silica. In particular, we analyze the spatial dependence of EEL spectra in two geometrical arrangements: a free-standing truncated slab of silica and a slab with a junction between silica and silicon. In both cases, we identify different loss channels, involving polaritonic and nonpolaritonic contributions to the total electron energy loss, and we obtain the corresponding energy-filtered maps. Furthermore, we present a comparison of the theoretical simulations for a silica-silicon junction with experimental results, and we discuss the spatial resolution attainable from the energy-filtered map considering optical phonon excitations in a conventional experimental arrangement., A.K., R.H., and J.A. acknowledge the support of the Spanish Ministry of Economy, Industry and Competitiveness (national projects MAT2015-65525-R, FIS2016-80174-P, and project MDM-2016-0618 of the Maria de Maetzu Units of Excellence Programme). A.K. further acknowledges Thermo Fisher Scientific and the Czechoslovak Microscopic Society scholarship for young researchers. P.A.C., K.V., and P.R. acknowledge support from the US National Science Foundation CHE-1508667 and the use of (S)TEM at John M. Cowley Center for High Resolution Electron Microscopy, Eyring Materials Center at Arizona State University, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Autonomous navigation of micro aerial vehicles using high-rate and low-cost sensors

  • Santamaria-Navarro, Àngel
  • Loianno, Giuseppe
  • Solà, Joan
  • Kumar, Vijay
  • Andrade-Cetto, Juan
The combination of visual and inertial sensors for state estimation has recently found wide echo in the robotics community, especially in the aerial robotics field, due to the lightweight and complementary characteristics of the sensors data. However, most state estimation systems based on visual-inertial sensing suffer from severe processor requirements, which in many cases make them impractical. In this paper, we propose a simple, low-cost and high rate method for state estimation enabling autonomous flight of micro aerial vehicles, which presents a low computational burden. The proposed state estimator fuses observations from an inertial measurement unit, an optical flow smart camera and a time-of-flight range sensor. The smart camera provides optical flow measurements up to a rate of 200 Hz, avoiding the computational bottleneck to the main processor produced by all image processing requirements. To the best of our knowledge, this is the first example of extending the use of these smart cameras from hovering-like motions to odometry estimation, producing estimates that are usable during flight times of several minutes. In order to validate and defend the simplest algorithmic solution, we investigate the performances of two Kalman filters, in the extended and error-state flavors, alongside with a large number of algorithm modifications defended in earlier literature on visual-inertial odometry, showing that their impact on filter performance is minimal. To close the control loop, a non-linear controller operating in the special Euclidean group SE(3) is able to drive, based on the estimated vehicle’s state, a quadrotor platform in 3D space guaranteeing the asymptotic stability of 3D position and heading. All the estimation and control tasks are solved on board and in real time on a limited computational unit. The proposed approach is validated through simulations and experimental results, which include comparisons with ground-truth data provided by a motion capture system. For the benefit of the community, we make the source code public., This work was funded by the project ROBINSTRUCT (TIN2014-58178-R) and the Ramón y Cajal posdoctoral fellowship (RYC-2012-11604) from the Spanish Ministry of Economy and Competitiveness, by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the EU H2020 project AEROARMS (H2020-ICT-2014-1-644271)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Economic model predictive control with nonlinear constraint relaxation for the operational management of water distribution networks

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper presents the application of an economic model predictive control (MPC) for the operational management of water distribution networks (WDNs) with periodic operation and nonlinear constraint relaxation. In addition to minimizing operational costs, the proposed approach aims to reduce the computational load and to improve the implementation efficiency associated with the nonlinear nature of the MPC problem. The behavior of the WDN is characterized by a set of difference-algebraic equations, where the relation of hydraulic pressure/head and flow in interconnected pipes is nonlinear. Specifically, the considered WDN model includes two categories of nonlinear algebraic equations for unidirectional and bidirectional flows in pipes, respectively. In this paper, we propose an iterative algorithm to relax these nonlinear algebraic equations into a set of linear inequality constraints that will be implemented in the economic MPC design, which improves the implementation efficiency and meanwhile optimizes the economic performance. Finally, the proposed strategy is applied to a well-known benchmark of the Richmond WDN. The closed-loop simulation results are shown and the proposed strategy is also compared with a nonlinear economic MPC using several key performance indexes., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the FPI grant (ref. BES-2014-068319), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy management strategy for a bioethanol isolated hybrid system: Simulations and experiments

  • Rullo, Pablo Gabriel
  • Costa Castelló, Ramon
  • Roda, Vicente
  • Feroldi, Diego
Renewable energy sources have significant advantages both from the environmental and the economic point of view. Additionally, renewable energy sources can contribute significantly to the development of isolated areas that currently have no connection to the electricity supply network. In order to make efficient use of these energy sources, it is necessary to develop appropriate energy management strategies. This work presents an energy management strategy for an isolated hybrid renewable energy system with hydrogen production from bioethanol reforming. The system is based on wind-solar energy, batteries and a bioethanol reformer, which produces hydrogen to feed a fuel cell system. Bioethanol can contribute to the development of isolated areas with surplus agricultural production, which can be used to produce bioethanol. The energy management strategy takes the form of a state machine and tries to maximize autonomy time while minimizing recharging time. The proposed rule-based strategy has been validated both by simulation and experimentally in a scale laboratory station. Both tests have shown the viability of the proposed strategy complying with the specifications imposed and a good agreement between experimental and simulation results, This work has been partially funded by the Spanish national project MICAPEM(Ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Argentine national project PICT2014-1607. This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAURof Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Force-based representation for non-rigid Shape and elastic model estimation

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
This paper addresses the problem of simultaneously recovering 3D shape, pose and the elastic model of a deformable object from only 2D point tracks in a monocular video. This is a severely under-constrained problem that has been typically addressed by enforcing the shape or the point trajectories to lie on low-rank dimensional spaces. We show that formulating the problem in terms of a low-rank force space that induces the deformation and introducing the elastic model as an additional unknown, allows for a better physical interpretation of the resulting priors and a more accurate representation of the actual object's behavior. In order to simultaneously estimate force, pose, and the elastic model of the object we use an expectation maximization strategy, where each of these parameters are successively learned by partial M-steps. Once the elastic model is learned, it can be transfered to similar objects to code its 3D deformation. Moreover, our approach can robustly deal with missing data, and encode both rigid and non-rigid points under the same formalism. We thoroughly validate the approach on Mocap and real sequences, showing more accurate 3D reconstructions than state-of-the-art, and additionally providing an estimate of the full elastic model with no a priori information., This work has been partially supported by the Spanish Ministry of Science and Innovation under project RobInstruct TIN2014-58178-R; and by a Google Faculty Award. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A shifting pole placement approach for the design of performance-varying multivariable PID controllers via BMIs

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Puig, Vicenç
  • Quevedo, Joseba
In this paper, the design of a performance-varying multivariable Proportional-Integral-Derivative (PID) controllers is presented. The main objective is to provide a framework for changing online the closed-loop behavior of the controlled system using the shifting pole placement approach. In order to carry out this target, the PID design problem is transformed into a static output feedback design problem which is analyzed through the linear parameter-varying (LPV) paradigm. An academic example is used to demonstrate the effectiveness of the proposed approach., This work has been partly funded by MINECO and FEDER through the project CICYT HARCRICS (ref.DPI2014-58104-R) and SCAV (ref.DPI2017-88403-R). This work has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formación (FJCI-2016-2901)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A two-tank benchmark for detection and isolation of cyber attacks

  • Quevedo, Joseba
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
This paper presents a benchmark for the detection and isolation of cyber attacks, which is a non-linear controlled interconnected system based on a two tank system. In this benchmark, a malicious attacker wants to remain hidden while stealing water by altering the signals of the sensors of the levels of the tanks. It is assumed that the attacker can steal water from the tanks using extraction pumps with pre-established flow rates and, depending on the theft and the type of sensor alteration, different attack scenarios are proposed., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agència de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Composite PID control with unknown dynamics estimator for rotomagnet plant

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Although PID control has been widely used in practical engineering, its ability to reject external disturbance and to handle severe nonlinearities should be further enhanced. In this paper, we present a simple robust unknown dynamics estimation, which can be easily incorporated into PID control to achieve satisfactory control performance for a rotomagnet plant subject to period disturbance. The use of this estimator together with PID control leads to a feedforward like composite control framework. Unlike other estimators, only low-pass filter operations on the input and output and simple algebraic operations are needed to construct our estimator, while exponential convergence can be guaranteed. Numerical simulations are given to show the validity of the proposed estimator and composite PID control., This work was supported by the National Natural Science Foundation of China (NSFC) under grant 61573174 and the spanish Ministerio de Educacion project DPI2015- 69286-C3-2-R (MINECO/FEDER). This work is supported by the Spanish State Research Agency through the Marıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Frequency-based detection of replay attacks: application to a multiple tank system

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a frequency-based method for detecting replay attacks and its application to a multiple tank system. This method introduces a sinusoidal signal with a time-varying frequency (authentication signature) into the closed-loop system and checks whether the output signal is compatible with the signature or not. The effectiveness of the method is illustrated through simulation scenarios using a 9-tank system under different situations., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agènda de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Grid voltage regulation using a reset PI+CI controller for energy storage systems

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Hybrid controllers are capable of improved performance over their linear counterparts. In particular, reset controllers like the PI+CI are capable of fast flat response for lag dominant plants. Grid connected power converters especially interfacing energy storage systems to grids are required to have fast response to varying load demands to ensure minimum variation in grid parameters. Application of PI+CI controllers in such systems can improve their performance. In this work the improvement brought about by use of PI+CI controller employed for energy storage system power converters is highlighted by comparing it with PI controller based system under load variations. A DC microgrid with Fuel cell-supercapacitor based storage elements are considered here. The design criteria and simulation results are presented here., This work was partially supported, including FEDER co-funding, by the Spanish Ministerio de Educacin project DPI2015-69286-C3-2-R (MINECO/FEDER), project DPI2013-47100-C2-1-P, and project DPI2016- 79278-C2-1-R. This work is supported by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The use of interactivity in the controller design: Loop shaping versus closed-loop shaping

  • Díaz, José Manuel
  • Dormido, Sebastián
  • Costa Castelló, Ramon
Frequency domain is one of the most popular and powerful framework to design control system. Usually this procedure is done using the open-loop transfer function. In this work, it is explored the possibility to perform the controller design by closed-loop shaping. It is analyzed how graphical representation and interactivity can be used in this framework to help automatic control students during the learning process., This work was supported by Spanish Ministry of Economy and Competitiveness under projects DPI2012-31303 and DPI2015-69286-C3-2-R (MINECO/FEDER). This work is supported by the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deciding the different robot roles for patient cognitive training

  • Andriella, Antonio
  • Alenyà, Guillem
  • Hernández-Farigola, Joan
  • Torras, Carme
Alzheimer’s Disease (AD) and Mild Cognitive Impairment (MCI) represent a major challenge for health systems within the aging population. New and better instruments will be crucial to assess the disease severity and progression, as well as to improve its treatment, stimulation, and rehabilitation. With the purpose of detecting, assessing and quantifying cognitive impairments like MCI or AD, several methods are employed by clinical experts. Syndrom Kurztest neuropsychological battery (SKT) is a simple and short test to measure cognitive decline as it assesses memory, attention, and related cognitive functions, taking into account the speed of information processing. In this paper, we present a decision system to embed in a robot that can set up a productive interaction with a patient, and can be employed by the caregiver to motivate and support him while performing cognitive exercises as SKT. We propose two different interaction loops. First, the robot interacts with the caregiver in order to set up the mental and physical impairments of the patient and indicate a goal of the exercise. This is used to determine the desired robot behavior (human-centric or robot-centric, and preferred interaction modalities). Second, the robot interacts with the patient and adapts its actions to engage and assist him to complete the exercise. Two batches of experiments were conducted, and the results indicated that the robot can take profit of the initial interaction with the caregiver to provide a quicker personalization, and also it can adapt to different user responses and provide support and assistance at different levels of interaction., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie SkłodowskaCurie grant agreement No. 721619 by the Spanish Ministry of Science and Innovation under project HuMoUR TIN2017-90086 and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mathematical modeling, numerical simulation and experimental comparison of the desorption process in a metal hydride hydrogen storage system

  • Busqué Somacarrera, Raquel
  • Torres, Ricardo
  • Grau, Joan
  • Roda, Vicente
  • Husar, Attila
A two-dimensional axisymmetric model is developed to study the hydrogen desorption reaction and its subsequent discharge in a metal hydride canister. Experimental tests are performed on an in-house fabricated setup. An extensive study on the effects of the metal properties and boundary conditions on discharging performance is carried out through non-destructive testing (NDT). Results show that the desorption process is more effective if the activation energy for desorption (Ed) and the reaction enthalpy (ΔH) decrease, and when the desorption rate coefficient (Cd) and the external convection heat transfer coefficient when the bottle is being heated (h) increase. Furthermore, porosity (ε) can be useful for the design of hydrogen storage systems, with a trade-off between charge/discharge time and storage capacity. Numerical and experimental results are compared achieving a good agreement. These results can be used to select metal hydride materials and also for the future evaluation of metal hydride degradation., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Actuator fault tolerance evaluation approach of nonlinear model predictive control systems using viability theory

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
In this paper, an approach to evaluate the actuator fault tolerance of a nonlinear model predictive control (NMPC) system using viability theory is proposed. Viability theory provides several concepts formulated in a set form (viability kernel and capture basin) that are very useful to assess if after the fault the NMPC controller will be able to achieve their goal either using a reconfiguration or an accommodation strategy. By representing the nonlinear model of the system in a linear parameter varying (LPV) form and using zonotopes to evaluate viability sets, an algorithm is developed and implemented that is able to assess the tolerance of the NMPC controller. To illustrate the proposed approach two application examples based on well-known control problems (a pasteurization plant and a mobile robot) are used., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through the projects ECOCIS (Ref. DPDEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Robust and Real-Time Detection and Tracking of Moving Objects with Minimum 2D LiDAR Information to Advance Autonomous Cargo Handling in Ports

  • Vaquero, Victor
  • Repiso, Ely
  • Sanfeliu, Alberto
Detecting and tracking moving objects (DATMO) is an essential component for autonomous driving and transportation. In this paper, we present a computationally low-cost and robust DATMO system which uses as input only 2D laser rangefinder (LRF) information. Due to its low requirements both in sensor needs and computation, our DATMO algorithm is meant to be used in current Autonomous Guided Vehicles (AGVs) to improve their reliability for the cargo transportation tasks at port terminals, advancing towards the next generation of fully autonomous transportation vehicles. Our method follows a Detection plus Tracking paradigm. In the detection step we exploit the minimum information of 2D-LRFs by segmenting the elements of the scene in a model-free way and performing a fast object matching to pair segmented elements from two different scans. In this way, we easily recognize dynamic objects and thus reduce consistently by between two and five times the computational burden of the adjacent tracking method. We track the final dynamic objects with an improved Multiple-Hypothesis Tracking (MHT), to which special functions for filtering, confirming, holding, and deleting targets have been included. The full system is evaluated in simulated and real scenarios producing solid results. Specifically, a simulated port environment has been developed to gather realistic data of common autonomous transportation situations such as observing an intersection, joining vehicle platoons, and perceiving overtaking maneuvers. We use different sensor configurations to demonstrate the robustness and adaptability of our approach. We additionally evaluate our system with real data collected in a port terminal the Netherlands. We show that it is able to accomplish the vehicle following task successfully, obtaining a total system recall of more than 98% while running faster than 30 Hz, This work has been partly funded by the EU project CargoANTs FP7-SST-2013-605598, the Spanish MINECO projects DPI2016-78957-R (AEI/FEDER EU) and Unidad de Excelencia Maria de Maeztu 2016 (MDM-2016-0656)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Imidazole-grafted nanogels for the fabrication of organic–inorganic protein hybrids

  • Rodriguez-Abetxuko, Andoni
  • Morant-Miñana, Maria Carmen
  • López-Gallego, Fernando
  • Yate, Luis
  • Seifert, Andreas
  • Knez, Mato
  • Beloqui, Ana
Here, a platform for the development of highly responsive organic–inorganic enzyme hybrids is provided. The approach entails a first step of protein engineering, in which individual enzymes are armored with a porous nanogel decorated with imidazole motifs. In a second step, by mimicking the biomineralization mechanism, the assembly of the imidazole nanogels with CuSO4 and phosphate salts is triggered. A full characterization of the new composites reveals the first reported example in which the assembly mechanism is triggered by the sum of Cu(II)–imidazole interaction and Cu3(PO4)2 inorganic salt formation. It is demonstrated that the organic component of the hybrids, namely the imidazole‐modified polyacrylamide hydrogel, provides a favorable spatial distribution for the enzyme. This results in enhanced conversion rates, robustness of the composite at low pH values, and a remarkable thermal stability at 65 °C, exhibiting 400% of the activity of the mineralized enzyme lacking the organic constituent. Importantly, unlike in previous works, the protocol applies to the use of a broad range of transition metal cations (including mono‐, di‐, and trivalent cations) to trigger the mineralization mechanism, which eventually broadens the chemical and structural diversity of organic–inorganic protein hybrids., This project had received funding from the Spanish Ministry of Economy and Competitiveness (MINECO) and the FEDER funds in the frame of “Plan Nacional – Retos para la Sociedad” call with the Grant Reference No. MAT2017‐88808‐R. This work was performed under the Maria de Maeztu Units of Excellence Programme – Grant No. MDM‐2016‐0618. A.B. thanks Diputación de Guipúzcoa for current funding in the frame of Gipuzkoa Fellows program. M.K. acknowledges financial support by the Spanish Ministry of Economy and Competitiveness (MINECO) within Grant Agreement No. MAT2016‐77393‐R, including FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Suitability Assessment of X-Band Satellite SAR Data for Geotechnical Monitoring of Site Scale Slow Moving Landslides

  • Bru, Guadalupe
  • Escayo, Joaquin
  • Fernández Torres, José
  • Mallorquí Franquet, Jordi Joan
  • Iglesias, Rubén
  • Sansosti, Eugenio
  • Abajo, Tamara
  • Morales, Antonio
This work addresses the suitability of using X-band Synthetic Aperture Radar (SAR) data for operational geotechnical monitoring of site scale slow moving landslides, affecting urban areas and infrastructures. The scale of these studies requires high resolution data. We propose a procedure for the practical use of SAR data in geotechnical landslides campaigns, that includes an appropriate dataset selection taking into account the scenario characteristics, a visibility analysis, and considerations when comparing advanced differential SAR interferometry (A-DInSAR) results with other monitoring techniques. We have determined that Sentinel-2 satellite optical images are suited for performing high resolution land cover classifications, which results in the achievement of qualitative visibility maps. We also concluded that A-DInSAR is a very powerful and versatile tool for detailed scale landslide monitoring, although in combination with other instrumentation techniques., This work was financially supported by the Spanish Ministerio de Economía y Competitividad (MINECO) research projects IPT-2011-1234-310000, ESP2013-47780-C2-1-R, and RTC-2014-1922-5. Research by RI and JJM has been also supported by the Big Risk project (contract number BIA2008-06614) and by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Research Agency (AEI) and the European Funds for Regional Development (EFRD) under project TEC2017-85244-C2-1-P. CommSensLab is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assaying chromatin accessibility using ATAC-seq in invertebrate chordate embryos

  • Magri, Marta Silvia
  • Jiménez-Gancedo, Sandra
  • Bertrand, Stephanie
  • Madgwick, Alicia
  • Escrivá, Héctor
  • Lemaire, Patrick
  • Gómez-Skarmeta, José Luis
Cis-regulatory elements (CREs) are non-coding DNA regions involved in the spatio-temporal regulation of gene expression. Gene regulatory changes drive animal development and play major roles during evolution of animal body plans. Therefore, we believe that determining CREs at different developmental stages and across animal lineages is critical to understand how evolution operates through development. The Assay for Transposase-Accessible Chromatin followed by high-throughput sequencing (ATAC-seq) is a powerful technique for the study of CREs that takes advantage of Tn5 transposase activity. Starting from fewer than 105 cells, in a 1-day procedure, it is possible to detect, at a genome-wide level, CREs located in open chromatin regions with high resolution. Here, we describe a detailed step-by-step ATAC-seq protocol for invertebrate chordate marine embryos. We have successfully applied this technique to amphioxus and two species of tunicate embryos. We also show an easy workflow to analyze data generated with this technique. Moreover, we point out that this method and our bioinformatic pipeline are efficient to detect CREs associated with Wnt signaling pathway by simply using embryos treated with a drug that perturbs this pathway. This approach can be extended to other signaling pathways and also to embryo mutants for critical genes. Our results therefore demonstrate the power of ATAC-seq for the identification of CREs that play essential functions during animal development in a wide range of invertebrate or vertebrate animals., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (Grant Agreement No. 740041), the Spanish Ministerio de Economía y Competitividad (Grant No. BFU2016-74961-P), and the Andalusian Government (Grant No. BIO-396). This work was also supported by the institutional grant Unidad de Excelencia María de Maeztu (MDM-2016-0687 to the Department of Gene regulation and morphogenesis of Centro Andaluz de Biología del Desarrollo) and by the EMBO short-term fellowship. The laboratory of HE and SB was supported by the Centre National de la Recherche Scientifique (CNRS) and the Agence Nationale de la Recherche (Grant No. ANR-16-CE12-0008-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simultaneous local heating/thermometry based on plasmonic magnetochromic nanoheaters

  • Li, Zhi
  • López-Ortega, Alberto
  • Aranda-Ramos, Antonio
  • Tajada Herráiz, José Luis
  • Sort, Jordi
  • Nogués, Carme
  • Vavassori, Paolo
  • Nogués, Josep
  • Sepúlveda, Borja
A crucial challenge in nanotherapies is achieving accurate and real‐time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic‐induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60‐fold smaller than state‐of‐the‐art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real‐time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state‐of‐the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology., This work was supported by the Spanish Ministry of Economy, Industry and Competitivenes (MINECO) projects MAT2013‐48628‐R, MAT2016‐77391‐R, and PCIN‐2016‐093 (H2020 M‐ERA.NET). Z.L. acknowledges the Chinese Scholarship Council (CSC) Program (201506950059) for financial support. The 2017‐SGR‐292 project of the Generalitat de Catalunya is acknowledged. The ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa programme (MINECO, No. SEV‐2013‐0295). A.L.‐O. and P.V. acknowledge funding from the Basque Government (No. PI2015_1_19), MINECO and the European Regional Development Fund (FEDER) (No. FIS2015 64519 R). A.L.‐O. acknowledges the support from Juan de la Cierva grant. This work was also supported by MINECO under the Maria de Maeztu Units of Excellence (MDM‐2016‐0618). J.S. acknowledges the financial support by the European Research Council (SPIN‐PORICS 2014‐Consolidator Grant, Agreement No. 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Active SLAM for autonomous underwater exploration

  • Palomeras, Narcís
  • Carreras, Marc
  • Andrade-Cetto, Juan
Exploration of a complex underwater environment without an a priori map is beyond the state of the art for autonomous underwater vehicles (AUVs). Despite several efforts regarding simultaneous localization and mapping (SLAM) and view planning, there is no exploration framework, tailored to underwater vehicles, that faces exploration combining mapping, active localization, and view planning in a unified way. We propose an exploration framework, based on an active SLAM strategy, that combines three main elements: a view planner, an iterative closest point algorithm (ICP)-based pose-graph SLAM algorithm, and an action selection mechanism that makes use of the joint map and state entropy reduction. To demonstrate the benefits of the active SLAM strategy, several tests were conducted with the Girona 500 AUV, both in simulation and in the real world. The article shows how the proposed framework makes it possible to plan exploratory trajectories that keep the vehicle's uncertainty bounded; thus, creating more consistent maps., This research was funded by the Spanish State Research Agency through grants DPI2015-73978-JIN and DPI2017-89564-P, and the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adapting robot task planning to user preferences: an assistive shoe dressing example

  • Canal, Gerard
  • Alenyà, Guillem
  • Torras, Carme
Healthcare robots will be the next big advance in humans’ domestic welfare, with robots able to assist elderly people and users with disabilities. However, each user has his/her own preferences, needs and abilities. Therefore, robotic assistants will need to adapt to them, behaving accordingly. Towards this goal, we propose a method to perform behavior adaptation to the user preferences, using symbolic task planning. A user model is built from the user’s answers to simple questions with a fuzzy inference system, and it is then integrated into the planning domain. We describe an adaptation method based on both the user satisfaction and the execution outcome, depending on which penalizations are applied to the planner’s rules. We demonstrate the application of the adaptation method in a simple shoe-fitting scenario, with experiments performed in a simulated user environment. The results show quick behavior adaptation, even when the user behavior changes, as well as robustness to wrong inference of the initial user model. Finally, some insights in a non-simulated world shoe-fitting setup are also provided., This work has been partially supported by the CHIST-ERA Project I-DRESS PCIN-2015-147, by the Spanish Ministry of Science and Innovation HuMoUR TIN2017-90086-R and the AEI through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Gerard Canal is also supported by the Spanish Ministry of Education, Culture and Sport via a doctoral grant FPU15/00504.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adaptive Side-by-Side Social Robot Navigation to Approach and Interact with People

  • Repiso, Ely
  • Garrell, Anaís
  • Sanfeliu, Alberto
This paper presents a new framework for how autonomous social robots approach and accompany people in urban environments. The method discussed allows the robot to accompany a person and approach to other one, by adapting its own navigation in anticipation of future interactions with other people or contact with static obstacles. The contributions of the paper are manifold: firstly, we extended the Social Force model and the Anticipative Kinodynamic Planner (Ferrer and Sanfeliu, in: IEEE/RSJ international conference on intelligent robots and systems. IEEE, 2014) to the case of an adaptive side-by-side navigation; secondly, we enhance side-by-side navigation with an approaching task and a final positioning that allows the robot to interact with both people; and finally, we use findings from experiments of real-life observations of people walking in pairs to define the parameters of the human–robot interaction in our case of adaptive side-by-side. The method was validated by a large set of simulations; we also conducted real-life experiments with our robot, Tibi, to validate the framework described for the interaction process. In addition, we carried out various surveys and user studies to indicate the social acceptability of the robots performance of the accompanying, approaching and positioning tasks., Work supported by the Spanish Ministry of Science and Innovation under project ColRobTransp (DPI2016-78957-R. AEI/FEDER EU), by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and EU TERRINET project (H2020-INFRAIA-2017-1-two-stage-730994). Ely Repiso is also supported by Spanish Ministry of Science and Innovation under a FPI-grant (BES-2014-067713)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Análisis y Diseño de Sistemas Lineales con Parámetros Variantes Utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Nejjari, Fatiha
  • Puig, Vicenç
[ES] En este articulo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H1 garantizado y el coste cuadrático garantizado, as´ı como tambi´en diferentes estructuras de control, tales como el control por realimentacion de estado, el control por realimentacion de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., [EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H1 performance and guaranteed quadratic cost, as well as dierent control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigacion (AEI) mediante el sello de excelencia cientıfica Marıa de Maetzu al IRI (ref. MDM-2016-0656), la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019), y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An optimization-based control strategy for energy efficiency of discrete manufacturing systems

  • Diaz C., Jenny L.
  • Bermeo-Ayerbe, Miguel Ángel
  • Diaz-Rozo, Javier
  • Ocampo-Martínez, Carlos
In order to reduce the global energy consumption and avoid highest power peaks during operation of manufacturing systems, an optimization-based controller for selective switching on/off of peripheral devices in a test bench that emulates the energy consumption of a periodic system is proposed. First, energy consumption models for the test-bench devices are obtained based on data and subspace identification methods. Next, a control strategy is designed based on both optimization and receding horizon approach, considering the energy consumption models, operating constraints, and the real processes performed by peripheral devices. Thus, a control policy based on dynamical models of peripheral devices is proposed to reduce the energy consumption of the manufacturing systems without sacrificing the productivity. Afterward, the proposed strategy is validated in the test bench and comparing to a typical rule-based control scheme commonly used for these manufacturing systems. Based on the obtained results, reductions near 7% could be achieved allowing improvements in energy efficiency via minimization of the energy costs related to nominal power purchased., This work has been funded by the project IKERCON (ref. C10683) and partially supported by the Spanish State Research Agency, Spain through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Jenny Díaz has been supported by FI-AGAUR scholarship programme of the Catalan Government, Spain .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anticipatory kinodynamic motion planner for computing the best path and velocity trajectory in autonomous driving

  • Pérez Talamino, Jordi
  • Sanfeliu, Alberto
This paper presents an approach, using an anticipatory kinodynamic motion planner, for obtaining the best trajectory and velocity profile for autonomous driving in dynamic complex environments, such as driving in urban scenarios. The planner discretizes the road search space and looks for the best vehicle path and velocity profile at each control period of time, assuming that the static and dynamic objects have been detected. The main contributions of the work are in the anticipatory kinodynamic motion planner, in a fast method for obtaining the G-splines for path generation, and in a method to compute and select the best velocity profile at each candidate path that fulfills the vehicle kinodynamic constraints, taking into account the passenger comfort. The method has been developed and tested in MATLAB through a set of simulations in different representative scenarios, involving fixed obstacles and moving vehicles. The outcome of the simulations shows that the anticipatory kinodynamic planner performs correctly in diverse dynamic scenarios, maintaining smooth accelerations for passenger comfort., Work supported by the Spanish Ministry of Science and Innovation under project ColRobTransp (DPI2016-78957-RAEI/FEDER EU) and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of Energy Management in a Fuel Cell/Battery Hybrid Vehicle

  • Carignano, Mauro G.
  • Roda, Vicente
  • Costa Castelló, Ramon
  • Valiño García, Luis
  • Lozano Fantoba, Antonio
  • Barreras Toledo, Félix
The energy management strategy plays a major role in hybrid platforms powered by fuel cells (FCs) and batteries. This paper presents an assessment of energy management focused on fuel economy and battery degradation. Particularly, a proposed heuristic strategy and the widely known equivalent consumption minimization strategy are compared with the optimal solution obtained offline via dynamic programming. The case study is based on a real FC hybrid vehicle. Accordingly, the powertrain model of the vehicle used for the simulations is validated experimentally, and the profile of the power demand is measured from the real application. The results show that the proposed strategy offers the same performance as the equivalent consumption minimization strategy when the battery degradation is prioritized, and in comparison with the optimal off-line solution, it can be seen that there is still margin for improvement in terms of battery degradation., This work was supported in part by the Scholarship Program BECAR of Ministerio de Modernizacion of Argentina, under Project DPI2015-69286-C3-1-R and Project DPI2015-69286-C3-2-R (MINECO/FEDER) of the Spanish Government, in part by the European Commission H2020 through the Fuel Cell and Hydrogen Joint Undertaking Project under Project INN-BALANCE 735969 and Project REWIND LIFE13 ENV/ES/000280, in part by the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group of LIFTEC under Grant T01_17R, in part by the Spanish State Research Agency through the Marí de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) Group under Grant 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A survey on the computation of quaternions from rotation matrices

  • Sarabandi, Soheil
  • Thomas, Federico
The parameterization of rotations is a central topic in many theoretical and applied fields such as rigid body mechanics, multibody dynamics, robotics, spacecraft attitude dynamics, navigation, three-dimensional image processing, and computer graphics. Nowadays, the main alternative to the use of rotation matrices, to represent rotations in ℝ 3, is the use of Euler parameters arranged in quaternion form. Whereas the passage from a set of Euler parameters to the corresponding rotation matrix is unique and straightforward, the passage from a rotation matrix to its corresponding Euler parameters has been revealed to be somewhat tricky if numerical aspects are considered. Since the map from quaternions to 3 × 3 rotation matrices is a 2-to-1 covering map, this map cannot be smoothly inverted. As a consequence, it is erroneously assumed that all inversions should necessarily contain singularities that arise in the form of quotients where the divisor can be arbitrarily small. This misconception is herein clarified. This paper reviews the most representative methods available in the literature, including a comparative analysis of their computational costs and error performances. The presented analysis leads to the conclusion that Cayley's factorization, a little-known method used to compute the double quaternion representation of rotations in four dimensions from 4 × 4 rotation matrices, is the most robust method when particularized to three dimensions., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through projects DPI2014-57220-C2-2-P, DPI2017-88282- P, and MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A virtual actuator approach for the secure control of networked LPV systems under pulse-width modulated DoS attacks

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Puig, Vicenç
  • Escobet, Teresa
  • Quevedo, Joseba
In this paper, we formulate and analyze the problem of secure control in the context of networked linear parameter varying (LPV) systems. We consider an energy-constrained, pulse-width modulated (PWM) jammer, which corrupts the control communication channel by performing a denial-of-service (DoS) attack. In particular, the malicious attacker is able to erase the data sent to one or more actuators. In order to achieve secure control, we propose a virtual actuator technique under the assumption that the behavior of the attacker has been identified. The main advantage brought by this technique is that the existing components in the control system can be maintained without need of retuning them, since the virtual actuator will perform a reconfiguration of the plant, hiding the attack from the controller point of view. Using Lyapunov-based results that take into account the possible behavior of the attacker, design conditions for calculating the virtual actuators gains are obtained. A numerical example is used to illustrate the proposed secure control strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Active chromatin marks drive spatial sequestration of heterochromatin in C. elegans nuclei

  • Cabianca, Daphne S.
  • Muñoz-Jiménez, Celia
  • Kalck, Véronique
  • Gaidatzis, Dimos
  • Padeken, Jan
  • Seeber, Andrew
  • Askjaer, Peter
  • Gasser, Susan M.
The execution of developmental programs of gene expression requires an accurate partitioning of the genome into subnuclear compartments, with active euchromatin enriched centrally and silent heterochromatin at the nuclear periphery1. The existence of degenerative diseases linked to lamin A mutations suggests that perinuclear binding of chromatin contributes to cell-type integrity2,3. The methylation of lysine 9 of histone H3 (H3K9me) characterizes heterochromatin and mediates both transcriptional repression and chromatin anchoring at the inner nuclear membrane4. In Caenorhabditis elegans embryos, chromodomain protein CEC-4 bound to the inner nuclear membrane tethers heterochromatin through H3K9me3,5, whereas in differentiated tissues, a second heterochromatin-sequestering pathway is induced. Here we use an RNA interference screen in the cec-4 background and identify MRG-1 as a broadly expressed factor that is necessary for this second chromatin anchor in intestinal cells. However, MRG-1 is exclusively bound to euchromatin, suggesting that it acts indirectly. Heterochromatin detachment in double mrg-1; cec-4 mutants is rescued by depleting the histone acetyltransferase CBP-1/p300 or the transcription factor ATF-8, a member of the bZIP family (which is known to recruit CBP/p300). Overexpression of CBP-1 in cec-4 mutants is sufficient to delocalize heterochromatin in an ATF-8-dependent manner. CBP-1 and H3K27ac levels increase in heterochromatin upon mrg-1 knockdown, coincident with delocalization. This suggests that the spatial organization of chromatin in C. elegans is regulated both by the direct perinuclear attachment of silent chromatin, and by an active retention of CBP-1/p300 in euchromatin. The two pathways contribute differentially in embryos and larval tissues, with CBP-1 sequestration by MRG-1 having a major role in differentiated cells., We thank the Caenorhabditis Genetics Center (CGC) of the NIH Office of Research Infrastructure Programs (P40 OD010440) for strains, S. Strome for the immunofluorescence protocol and H. Kimura for the H3K36me2 antibody. We are grateful to I. Katiç and R. Sack for invaluable technical support. We thank C. Schmid and FMI facilities as well as EMBL GeneCore for advice and support. D.S.C. was supported by an EMBO Long Term Fellowship and a FP7 Marie Curie Action Intra-European Fellowship. J.P. was supported by an EMBO Long Term Fellowship. C.M.-J. and P.A. thank the Spanish Ministry of Economy and Competitiveness for support (BFU2016-79313-P and MDM-2016-0687). S.M.G. thanks the Swiss National Science Foundation and the Novartis Research Foundation for support. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation programme (Epiherigans - grant agreement No 743312).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bibliographical review on cyber attacks from a control oriented perspective

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A toggle-switch and a feed-forward loop engage in the control of the Drosophila retinal determination gene network

  • Sánchez-Aragón, Máximo
  • Cantisán-Gómez, Julia
  • Luque, Carlos M.
  • Bras-Pereira, Catarina
  • Lopes, Carla S.
  • Lemos, María C.
  • Casares, Fernando
© 2019 Sánchez-Aragón, Cantisán-Gómez, Luque, Brás-Pereira, Lopes, Lemos and Casares, Dipterans show a striking range of eye sizes, shapes, and functional specializations. Their eye is of the compound type, the most frequent eye architecture in nature. The development of this compound eye has been most studied in Drosophila melanogaster. The early development of the Drosophila eye is under the control of a gene regulatory network of transcription factors and signaling molecules called the retinal determination gene network (RDGN). Nodes in this network have been found to be involved not only in the development of different eye types in invertebrates and vertebrates, but also of other organs. Here we have analyzed the network properties in detail. First, we have generated quantitative expression profiles for a number of the key RDGN transcription factors, at a single-cell resolution. With these profiles, and applying a correlation analysis, we revisited several of the links in the RDGN. Our study uncovers a new link, that we confirm experimentally, between the transcription factors Hth/Meis1 and Optix/Six3 and indicates that, at least during the period of eye differentiation, positive feedback regulation from Eya and Dac on the Pax6 gene Ey is not operating. From this revised RDGN we derive a simplified gene network that we model mathematically. This network integrates three basic motifs: a coherent feedforward loop, a toggle-switch and a positive autoregulation which, together with the input from the Dpp/BMP2 signaling molecule, recapitulate the gene expression profiles obtained experimentally, while ensuring a robust transition from progenitor cells into retinal precursors., This work was funded by MINECO and the Agencia Estatal de Investigacion (AEI) of Spain, co-financed by FEDER funds (EU) through grants BFU2012-34324 and BFU2015-66040-P to FC, MDM-2016-0687 in which FC is participant researcher, and TIN2017-89842 P in which MCL is participant researcher.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego, Bernardo
All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller's design to prevent a possibly severe deterioration of the system's performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Adrián Ruiz is also supported by Formació Personal Investigador a la Universitat Politècnica de Catalunya under an FPI-UPC 2018 grant (ref. 20 FPI-UPC 2018). Damiano Rotondo is also supported by Juan de la Cierva - Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detection of replay attacks in cyber-physical systems using a frequency-based signature

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Saludes, Jordi
  • Quevedo, Joseba
This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Economic health-aware LPV-MPC based on system reliability assessment for water transport network

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a health-aware control approach for drinking water transport networks. This approach is based on an economic model predictive control (MPC) that considers an additional goal with the aim of extending the components and system reliability. The components and system reliability are incorporated into the MPC model using a Linear Parameter Varying (LPV) modeling approach. The MPC controller uses additionally an economic objective function that determines the optimal filling/emptying sequence of the tanks considering that electricity price varies between day and night and that the demand also follows a 24-h repetitive pattern. The proposed LPV-MPC control approach allows considering the model nonlinearities by embedding them in the parameters. The values of these varying parameters are updated at each iteration taking into account the new values of the scheduling variables. In this way, the optimization problem associated with the MPC problem is solved by means of Quadratic Programming (QP) to avoid the use of nonlinear programming. This iterative approach reduces the computational load compared to the solution of a nonlinear optimization problem. A case study based on the Barcelona water transport network is used for assessing the proposed approach performance., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploiting symmetries in reinforcement learning of bimanual robotic tasks

  • Amadio, Fabio
  • Colomé, Adrià
  • Torras, Carme
Movement primitives (MPs) have been widely adopted for representing and learning robotic movements using reinforcement learning policy search. Probabilistic movement primitives (ProMPs) are a kind of MP based on a stochastic representation over sets of trajectories, able to capture the variability allowed while executing a movement. This approach has proved effective in learning a wide range of robotic movements, but it comes with the necessity of dealing with a high-dimensional space of parameters. This may be a critical problem when learning tasks with two robotic manipulators, and this work proposes an approach to reduce the dimension of the parameter space based on the exploitation of symmetry. A symmetrization method for ProMPs is presented and used to represent two movements, employing a single ProMP for the first arm and a symmetry surface that maps that ProMP to the second arm. This symmetric representation is then adopted in reinforcement learning of bimanual tasks (from user-provided demonstrations), using relative entropy policy search algorithm. The symmetry-based approach developed has been tested in an experiment of cloth manipulation, showing a speed increment in learning the task., This work was partially developed in the context of the project CLOTHILDE (>CLOTH manIpulation Learning from DEmonstrations>), which has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Advanced Grant agreement No 741930). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic Hh signalling can generate temporal information during tissue patterning

  • García-Morales, Diana
  • Navarro, Tomás
  • Iannini, Antonella
  • Pereira, Paulo S.
  • Míguez, David G.
  • Casares, Fernando
© The Author(s)., The differentiation of tissues and organs requires that cells exchange information in space and time. Spatial information is often conveyed by morphogens: molecules that disperse across receiving cells to generate signalling gradients. Cells translate such concentration gradients into space-dependent patterns of gene expression and cellular behaviour. But could morphogen gradients also convey developmental time? Here, by investigating the developmental role of Hh on a component of the Drosophila visual system, the ocellar retina, we have discovered that ocellar cells use the non-linear gradient of Hh as a temporal cue, collectively performing the biological equivalent of a mathematical logarithmic transformation. In this way, a morphogen diffusing from a non-moving source is decoded as a wave of differentiating photoreceptors that travels at constant speed throughout the retinal epithelium., Research was funded through grants BFU2015-66040-P and MDM-2016-0687 (to F.C.) and BFU2014-53299-P (to D.G.M.) from the Ministerio de Ciencia, Innovación y Universidades (Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

GANimation: One-Shot Anatomically Consistent Facial Animation

  • Pumarola, Albert
  • Agudo Martínez, Antonio
  • Martínez, Aleix M.
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
Recent advances in generative adversarial networks (GANs) have shown impressive results for the task of facial expression synthesis. The most successful architecture is StarGAN (Choi et al. in CVPR, 2018), that conditions GANs’ generation process with images of a specific domain, namely a set of images of people sharing the same expression. While effective, this approach can only generate a discrete number of expressions, determined by the content and granularity of the dataset. To address this limitation, in this paper, we introduce a novel GAN conditioning scheme based on action units (AU) annotations, which describes in a continuous manifold the anatomical facial movements defining a human expression. Our approach allows controlling the magnitude of activation of each AU and combining several of them. Additionally, we propose a weakly supervised strategy to train the model, that only requires images annotated with their activated AUs, and exploit a novel self-learned attention mechanism that makes our network robust to changing backgrounds, lighting conditions and occlusions. Extensive evaluation shows that our approach goes beyond competing conditional generators both in the capability to synthesize a much wider range of expressions ruled by anatomically feasible muscle movements, as in the capacity of dealing with images in the wild. The code of this work is publicly available at https://github.com/albertpumarola/GANimation., This work is partially supported by an Amazon Research Award, by the Spanish Ministry of Economy and Competitiveness under Projects HuMoUR TIN2017-90086-R, ColRobTransp DPI2016-78957 and María de Maeztu Seal of Excellence MDM-2016-0656; by the EU Project AEROARMS ICT-2014-1-644271; and by the Grant R01-DC- 014498 of the National Institute of Health. We also thank Nvidia for hardware donation under the GPU Grant Program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Launching of hyperbolic phonon-polaritons in h-BN slabs by resonant metal plasmonic antennas

  • Pons Valencia, P.
  • Alfaro-Mozaz, Francisco J.
  • Wiecha, M. M.
  • Biolek, V.
  • Dolado, Irene
  • Vélez, Saül
  • Li, Peining
  • Alonso-González, Pablo
  • Casanova, Félix
  • Hueso, Luis E.
  • Martín-Moreno, Luis
  • Hillenbrand, Rainer
  • Nikitin, Alexey Y.
Launching and manipulation of polaritons in van der Waals materials offers novel opportunities for field-enhanced molecular spectroscopy and photodetection, among other applications. Particularly, the highly confined hyperbolic phonon polaritons (HPhPs) in h-BN slabs attract growing interest for their capability of guiding light at the nanoscale. An efficient coupling between free space photons and HPhPs is, however, hampered by their large momentum mismatch. Here, we show —by far-field infrared spectroscopy, infrared nanoimaging and numerical simulations— that resonant metallic antennas can efficiently launch HPhPs in thin h-BN slabs. Despite the strong hybridization of HPhPs in the h-BN slab and Fabry-Pérot plasmonic resonances in the metal antenna, the efficiency of launching propagating HPhPs in h-BN by resonant antennas exceeds significantly that of the non-resonant ones. Our results provide fundamental insights into the launching of HPhPs in thin polar slabs by resonant plasmonic antennas, which will be crucial for phonon-polariton based nanophotonic devices., The authors acknowledge financial support from the European Commission under the Graphene Flagship (GrapheneCore2), the Spanish Ministry of Science, Innovation and Universities (national projects MAT2017-88358-C3, MAT2015-65159-R, MAT2015-65525-R, RTI2018-094830-B-100, RTI2018-094861-B-100, and the project MDM-2016-0618 of the Marie de Maeztu Units of Excellence Program) the Marie Sklodowska-Curie individual fellowship (SGPCM-705960), the Basque Government (PhD fellowship PRE 2018 2 0253), and the project PIC201660E046 from CSIC. M.M.W. acknowledges support from the Konrad-Adenauer-Stiftung. P.A.G. acknowledges support from the European Research Council under Starting Grant 715496, 2DNANOPTICA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interval observer versus set-membership approaches for fault detection in uncertain systems using zonotopes

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper presents both analysis and comparison of the interval observer–based and set-membership approaches for the state estimation and fault detection (FD) in uncertain linear systems. The considered approaches assume that both state disturbance and measurement noise are modeled in a deterministic context following the unknown but bounded approach. The propagation of uncertainty in the state estimation is bounded through a zonotopic set representation. Both approaches have been mathematically related and compared when used for state estimation and FD. A case study based on a two-tanks system is employed for showing the relationship between both approaches while comparing their performance., Spanish State Research Agency (AEI)through the María de Maeztu Seal ofExcellence to IRI, Grant/Award Number:MDM-2016-0656; European RegionalDevelopment Fund (ERFD); DEOCS,Grant/Award Number: MINECO DPI2016-76493; SCAV, Grant/AwardNumber: MINECO DPI2017-88403-R;AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems(SAC) group, Grant/Award Number: 2017SGR 482; Agència de Gestió d'AjutsUniversitaris i de Recerca
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On Cayley’s Factorization with an Application to the Orthonormalization of Noisy Rotation Matrices

  • Sarabandi, Soheil
  • Perez-Gracia, Alba
  • Thomas, Federico
A real orthogonal matrix representing a rotation in four dimensions can be decomposed into the commutative product of a left- and a right-isoclinic rotation matrix. This operation, known as Cayley’s factorization, directly provides the double quaternion representation of rotations in four dimensions. This factorization can be performed without divisions, thus avoiding the common numerical issues attributed to the computation of quaternions from rotation matrices. In this paper, it is shown how this result is particularly useful, when particularized to three dimensions, to re-orthonormalize a noisy rotation matrix by converting it to quaternion form and then obtaining back the corresponding proper rotation matrix. This re-orthonormalization method is commonly implemented using the Shepperd–Markley method, but the method derived here is shown to outperform it by returning results closer to those obtained using the singular value decomposition which are known to be optimal in terms of the Frobenius norm., Fuding was provided by Ministerio de Economía y Competitividad (Grant no. DPI2017-88282-P), Ministerio de Economía y Competitividad (Grant no. MDM-2016-0656) and National Science Foundation (Grant no. 1208385).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On inferring intentions in shared tasks for industrial collaborative robots

  • Olivares-Alarcos, Alberto
  • Foix, Sergi
  • Alenyà, Guillem
Inferring human operators’ actions in shared collaborative tasks plays a crucial role in enhancing the cognitive capabilities of industrial robots. In all these incipient collaborative robotic applications, humans and robots not only should share space, but also forces and the execution of a task. In this article, we present a robotic system that is able to identify different human’s intentions and to adapt its behavior consequently, only employing force data. In order to accomplish this aim, three major contributions are presented: (a) a force based operator’s intention recognition system based on data from only two users; (b) a force based dataset of physical human–robot interaction; and (c) validation of the whole system with 15 people in a scenario inspired by a realistic industrial application. This work is an important step towards a more natural and user-friendly manner of physical human–robot interaction in scenarios where humans and robots collaborate in the accomplishment of a task., This work is supported by the Regional Catalan Agency ACCIÓthrough the RIS3CAT2016 project SIMBIOTS(COMRDI16-1-0017) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (Institut de Robòtica i Informàtica Industrial)(MDM-2016-0656) and the HuMoUR project TIN2017-90086-R (AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimal sizing of storage elements for a vehicle based on fuel cells, supercapacitors, and batteries

  • Sampietro, José Luis
  • Puig, Vicenç
  • Costa Castelló, Ramon
To achieve a vehicle-efficient energy management system, an architecture composed of a PEM fuel cell as the main energy source and a hybrid storage system based on battery banks and supercapacitors is proposed. This paper introduces a methodology for the optimal component sizing aiming at minimizing the total cost, achieving a cheaper system that can achieve the requirements of the speed profiles. The chosen vehicle is an urban transport bus, which must meet the Buenos Aires Driving Cycle, and the Manhattan Driving Cycle. The combination of batteries and supercapacitors allows a better response to the vehicle’s power demand, since it combines the high energy density of the batteries with the high power density of the supercapacitors, allowing the best absorption of energy coming from braking. In this way, we address the rapid changes in power without reducing the global efficiency of the system. Optimum use of storage systems and fuel cell is analyzed through dynamic programming., This work has been partially funded by the Spanish national projects MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and SCAV (ref. DPI2017-88403-R MINECO/FEDER). This work is supported by the Spanish State Research Agencythrough the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: Application to UAV disturbance estimation

  • Cayero, Julián
  • Rotondo, Damiano
  • Morcego, Bernardo
  • Puig, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT DEOCS and SCAV (refs. MINECO DPI2016-76493, DPI2017-88403-R). It has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by AGAUR and the Spanish Research Agency through the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656). Julian Cayero is also supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, the European Social Fund (ESF) and the Agency for Management of University and Research Grants (AGAUR) under an FI-DGR grant (ref. 2016FI_B1 00024). Damiano Rotondo is also supported by a Juan de la Cierva-Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pose-graph SLAM sparsification using factor descent

  • Vallvé, Joan
  • Solà, Joan
  • Andrade-Cetto, Juan
Since state of the art simultaneous localization and mapping (SLAM) algorithms are not constant time, it is often necessary to reduce the problem size while keeping as much of the original graph's information content. In graph SLAM, the problem is reduced by removing nodes and rearranging factors. This is normally faced locally: after selecting a node to be removed, its Markov blanket sub-graph is isolated, the node is marginalized and its dense result is sparsified. The aim of sparsification is to compute an approximation of the dense and non-relinearizable result of node marginalization with a new set of factors. Sparsification consists on two processes: building the topology of new factors, and finding the optimal parameters that best approximate the original dense distribution. This best approximation can be obtained through minimization of the Kullback–Liebler divergence between the two distributions. Using simple topologies such as Chow–Liu trees, there is a closed form for the optimal solution. However, a tree is oftentimes too sparse and produces bad distribution approximations. On the contrary, more populated topologies require nonlinear iterative optimization. In the present paper, the particularities of pose-graph SLAM are exploited for designing new informative topologies and for applying the novel factor descent iterative optimization method for sparsification. Several experiments are provided comparing the proposed topology methods and factor descent optimization with state-of-the-art methods in synthetic and real datasets with regards to approximation accuracy and computational cost., This work has been supported by the Spanish Ministry of Economy and Competitiveness Project EB-SLAM [DPI2017-89564-P]; by the EU H2020 Project LOGIMATIC [H2020-Galileo-2015-1-687534]; and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI [MDM-2016-0656].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Practical Resolution Methods for MDPs in Robotics Exemplified with Disassembly Planning

  • Suárez Hernández, Alejandro
  • Torras, Carme
  • Alenyà, Guillem
In this letter, we focus on finding practical resolution methods for Markov decision processes (MDPs) in robotics. Some of the main difficulties of applying MDPs to real-world robotics problems are: first, having to deal with huge state spaces; and second, designing a method that is robust enough to dead ends. These complications restrict or make more difficult the application of methods, such as value iteration, policy iteration, or labeled real-time dynamic programming (LRTDP). We see in determinization and heuristic search a way to successfully work around these problems. In addition, we believe that many practical use cases offer the opportunity to identify hierarchies of subtasks and solve smaller, simplified problems. We propose a decision-making unit that operates in a probabilistic planning setting through stochastic shortest path problems, which generalize the most common types of MDPs. Our decision-making unit combines: first, automatic hierarchical organization of subtasks; and second, on-line resolution via determinization. We argue that several applications of planning benefit from these two strategies. We exemplify our approach with a robotized disassembly application. The disassembly problem is modeled in probabilistic planning definition language, and serves to define our experiments. Our results show many advantages of our method over LRTDP, such as a better capability to handle problems with large state spaces and state definitions that change when new fluents are discovered., This work is partially funded by the European project IMAGINE (Robots Understanding their Actions by Imagining their Effects), H2020-ICT-2016-1-731761, by the Spanish Ministry of Science and Innovation HuMoUR TIN2017-90086-R and the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reachability and stabilization of scheduled steady-states for LPV single-input systems

  • Corona, Darío
  • Cristofaro, Andrea
  • Rotondo, Damiano
The aim of this work is characterizing the class of LPV systems that admit steady-state trajectories depending exclusively on the scheduling parameter. In particular, it will be shown that only certain parameter dependent steady-state profiles are admissible and can be reached by means of a suitable control input. Furthermore, the asymptotic stability and the stabilization of such steady-states is investigated using Lyapunov-based techniques. Extensive numerical simulations illustrate and corroborate the theoretical results., This work has been partially funded by the Spanish Government and FEDER through the project CICYT DEOCS (ref. DPI2016-76493-C3-3-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resilient distributed model predictive control for energy management of interconnected microgrids

  • Ananduta, Wicak
  • Maestre, Jose Maria
  • Ocampo-Martínez, Carlos
  • Ishii, Hideaki
Distributed energy management of interconnected microgrids that is based on model predictive control (MPC) relies on the cooperation of all agents (microgrids). This paper discusses the case in which some of the agents might perform one type of adversarial actions (attacks) and they do not comply with the decisions computed by performing a distributed MPC algorithm. In this regard, these agents could obtain a better performance at the cost of degrading the performance of the network as a whole. A resilient distributed method that can deal with such issues is proposed in this paper. The method consists of two parts. The first part is to ensure that the decisions obtained from the algorithm are robustly feasible against most of the attacks with high confidence. In this part, we formulate the economic dispatch problem, taking into account the attacks as a chance-constrained problem, and employ a two-step randomization-based approach to obtain a feasible solution with a predefined level of confidence. The second part consists in the identification and mitigation of the adversarial agents, which utilizes hypothesis testing with Bayesian inference and requires each agent to solve a mixed-integer problem to decide the connections with its neighbors. In addition, an analysis of the decisions computed using the stochastic approach and the outcome of the identification and mitigation method is provided. The performance of the proposed approach is also shown through numerical simulations., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie Grant 675318 (INCITE) and has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM‐2016‐0656). Financial support by the Spanish MINECO project DPI2017‐86918‐R and the Japanese Society for the Promotion of Science (scholarship PE16048) is also gratefully acknowledged. The authors also acknowledge JST CREST Grants JPMJCR15K3 and JPMJCR15K5.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Robust fault and icing diagnosis in unmanned aerial vehicles using LPV interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval unknown input observer for the robust fault diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs) described by an uncertain model. The proposed interval observer evaluates the set of values for the state, which are compatible with the nominal fault-free and icing-free operation and can be designed in such a way that some information about the nature of the unknown inputs affecting the system can be obtained, thus allowing the diagnosis to be performed. The proposed strategy has several advantages. First, the LPV paradigm allows taking into account operating point variations. Second, the noise rejection properties are enhanced by the presence of the integral term. Third, the interval estimation property guarantees the absence of false alarms. Linear matrix inequality–based conditions for the analysis/design of these observers are provided in order to guarantee the interval estimation of the state and the boundedness of the estimation. The developed theory is supported by simulation results, obtained with the uncertain model of a Zagi Flying Wing UAV, which illustrate the strong appeal of the methodology for identifying correctly unexpected changes in the system dynamics due to actuator faults or icing., EEA Financial Mechanism by a grantfrom Iceland, Liechtenstein, and Norway;Universidad Complutense de Madrid,Grant/Award Number:006-ABEL-IM-2014B; Spanish StateResearch Agency (AEI) and the EuropeanRegional Development Fund (ERFD),Grant/Award Numbers: CICYT DEOCSDPI2016-76493 and CICYT SCAVDPI2017-88403-R; DGR of the Generalitatde Catalunya, Grant/Award Number:2017/SGR/482; Spanish State ResearchAgency through the María de Maeztu Sealof Excellence to IRI, Grant/AwardNumber: MDM-2016-0656; Juan de laCierva Formación, Grant/Award Number:FJCI-2016-29019; Research Council ofNorway through the Centres of Excellencefunding scheme, Grant/Award Number:223254-AMOS; ERCIM Alain BensoussanFellowship programme
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shape Basis Interpretation for Monocular Deformable 3-D Reconstruction

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
In this paper, we propose a novel interpretable shape model to encode object nonrigidity. We first use the initial frames of a monocular video to recover a rest shape, used later to compute a dissimilarity measure based on a distance matrix measurement. Spectral analysis is then applied to this matrix to obtain a reduced shape basis, that in contrast to existing approaches, can be physically interpreted. In turn, these precomputed shape bases are used to linearly span the deformation of a wide variety of objects. We introduce the low-rank basis into a sequential approach to recover both camera motion and nonrigid shape from the monocular video, by simply optimizing the weights of the linear combination using bundle adjustment. Since the number of parameters to optimize per frame is relatively small, specially when physical priors are considered, our approach is fast and can potentially run in real time. Validation is done in a wide variety of real-world objects, undergoing both inextensible and extensible deformations. Our approach achieves remarkable robustness to artifacts such as noisy and missing measurements and shows an improved performance to competing methods., This work is supported in part by a Google Faculty Research Award, by the MINECO projects HuMoUR TIN2017-90086-R and Mar´ıa de Maeztu Seal of Excellence MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Short-Term Human–Robot Interaction Adaptability in Real-World Environments

  • Andriella, Antonio
  • Torras, Carme
  • Alenyà, Guillem
In recent years there has been an increasing interest in deploying robotic systems in public environments able to effectively interact with people. To properly work in the wild, such systems should be robust and be able to deal with complex and unpredictable events that seldom happen in controlled laboratory conditions. Moreover, having to deal with untrained users adds further complexity to the problem and makes the task of defining effective interactions especially difficult. In this work, a Cognitive System that relies on planning is extended with adaptive capabilities and embedded in a Tiago robot. The result is a system able to help a person to complete a predefined game by offering various degrees of assistance. The robot may decide to change the level of assistance depending on factors such as the state of the game or the user performance at a given time. We conducted two days of experiments during a public fair. We selected random users to interact with the robot and only for one time. We show that, despite the short-term nature of human–robot interactions, the robot can effectively adapt its way of providing help, leading to better user performances as compared to a robot not providing this degree of flexibility., This project has been partially funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement SOCRATES (No 721619), by the Spanish Ministry of Science and Innovation HuMoUR (TIN2017-90086-R), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

yap1b, a divergent Yap/Taz family member, cooperates with yap1 in survival and morphogenesis via common transcriptional targets

  • Vázquez-Marín, Javier
  • Gutiérrez-Triana, José Arturo
  • Almuedo-Castillo, María
  • Buono, Lorena
  • Gómez-Skarmeta, José Luis
  • Mateo, Juan Luis
  • Wittbrodt, Joachim
  • Martínez-Morales, Juan Ramón
© The Author(s)., Yap1/Taz are well-known Hippo effectors triggering complex transcriptional programs controlling growth, survival and cancer progression. Here, we describe yap1b, a new Yap1/Taz family member with a unique transcriptional activation domain that cannot be phosphorylated by Src/Yes kinases. We show that yap1b evolved specifically in euteleosts (i.e. including medaka but not zebrafish) by duplication and adaptation of yap1. Using DamID-seq, we generated maps of chromatin occupancy for Yap1, Taz (Wwtr1) and Yap1b in gastrulating zebrafish and medaka embryos. Our comparative analyses uncover the genetic programs controlled by Yap family proteins during early embryogenesis, and show largely overlapping targets for Yap1 and Yap1b. CRISPR/Cas9-induced mutation of yap1b in medaka does not result in an overt phenotype during embryogenesis or adulthood. However, yap1b mutation strongly enhances the embryonic malformations observed in yap1 mutants. Thus yap1−/−; yap1b−/− double mutants display more severe body flattening, eye misshaping and increased apoptosis than yap1−/− single mutants, thus revealing overlapping gene functions. Our results indicate that, despite its divergent transactivation domain, Yap1b cooperates with Yap1 to regulate cell survival and tissue morphogenesis during early development., This work was supported by grants from the Ministerio de Economía, Industria y Competitividad de Espanña (BFU2014-53765-P, BFU2016- 81887-REDT, BFU2017-86339-P and MDM-2016-0687 to J.R.M.-M.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Loss of glutathione redox homeostasis impairs proteostasis by inhibiting autophagy-dependent protein degradation

  • Guerrero-Gómez, David
  • Mora-Lorca, José Antonio
  • Sáenz, Beatriz
  • Naranjo-Galindo, Francisco José
  • Muñoz-Lobato, Fernando
  • Parrado-Fernández, Cristina
  • Goikolea, Julen
  • Cedazo-Mínguez, Ángel
  • Link, Chris D.
  • Neri, Christian
  • Sequedo, María Dolores
  • Vázquez-Manrique, Rafael P.
  • Fernández-Suárez, Elena
  • Goder, Veit
  • Pané, Roser
  • Cabiscol, Elisa
  • Askjaer, Peter
  • Cabello, Juan
  • Miranda-Vizuete, Antonio
In the presence of aggregation-prone proteins, the cytosol and endoplasmic reticulum (ER) undergo a dramatic shift in their respective redox status, with the cytosol becoming more oxidized and the ER more reducing. However, whether and how changes in the cellular redox status may affect protein aggregation is unknown. Here, we show that C. elegans loss-of-function mutants for the glutathione reductase gsr-1 gene enhance the deleterious phenotypes of heterologous human, as well as endogenous worm aggregation-prone proteins. These effects are phenocopied by the GSH-depleting agent diethyl maleate. Additionally, gsr-1 mutants abolish the nuclear translocation of HLH-30/TFEB transcription factor, a key inducer of autophagy, and strongly impair the degradation of the autophagy substrate p62/SQST-1::GFP, revealing glutathione reductase may have a role in the clearance of protein aggregates by autophagy. Blocking autophagy in gsr-1 worms expressing aggregation-prone proteins results in strong synthetic developmental phenotypes and lethality, supporting the physiological importance of glutathione reductase in the regulation of misfolded protein clearance. Furthermore, impairing redox homeostasis in both yeast and mammalian cells induces toxicity phenotypes associated with protein aggregation. Together, our data reveal that glutathione redox homeostasis may be central to proteostasis maintenance through autophagy regulation., Cristina Ayuso García and the Live Cell Imaging Facility, Karolinska Institutet, Sweden (supported by grants from the Knut and Alice Wallenberg Foundation, the Swedish Research Council, the Centre for Innovative Medicine and the Jonasson Centre at RIT, Sweden) are acknowledged for technical assistance. The Spanish Ministry of Economy and Competitiveness supported EF-S and VG (BFU2016–78265-P), PA (BFU2016–79313-P and MDM-2016–0687), and AM-V (BFU2015–64408-P). AM-V was also supported by the Instituto de Salud Carlos III (PI11/00072) and RPV-M (CPII16/00004, PI14/00949 and PI17/00011). All projects were cofinanced by the Fondo Social Europeo (FEDER). AM-V is a member of the GENIE and EU-ROS Cost Actions of the European Union and RPV-M is a Marie Curie Fellow (CIG322034, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable magnetoplasmonics in lattices of Ni/SiO2/Au dimers

  • Pourjamal, Sara
  • Kataja, Mikko
  • Maccaferri, Nicolò
  • Vavassori, Paolo
  • Dijken, Sebastiaan van
We present a systematic study on the optical and magneto-optical properties of Ni/SiO2/Au dimer lattices. By considering the excitation of orthogonal dipoles in the Ni and Au nanodisks, we analytically demonstrate that the magnetoplasmonic response of dimer lattices is governed by a complex interplay of near- and far-field interactions. Near-field coupling between dipoles in Ni and low-loss Au enhances the polarizabilty of single dimers compared to that of isolated Ni nanodisks. Far-field diffractive coupling in periodic lattices of these two particle types enlarges the difference in effective polarizability further. This effect is explained by an inverse relationship between the damping of collective surface lattice resonances and the imaginary polarizability of individual scatterers. Optical reflectance measurements, magneto-optical Kerr effect spectra, and finite-difference time-domain simulations confirm the analytical results. Hybrid dimer arrays supporting intense plasmon excitations are a promising candidate for active magnetoplasmonic devices., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Role of Interfaces on Spin Transport in Magnetic Insulator/Normal Metal Heterostructures

  • Fontcuberta, Josep
  • Vasili, Hari Babu
  • Gázquez, Jaume
  • Casanova, Félix
Spin currents have emerged as a new tool in spintronics, with promises of more efficient devices. A pure spin current can be generated in a nonmagnetic metallic (NM) layer by a charge current (spin Hall effect). When the NM layer is placed in contact with a magnetic material, a magnetoresistance (spin Hall magnetoresistance) develops in the former via the inverse spin Hall effect (ISHE). In other novel spin‐dependent phenomena, such as spin pumping or spin Seebeck effect, spin currents are generated by magnetic resonance or thermal gradients and detected via ISHE in a neighboring normal metal layer. All cases involve spin transport across interfaces between nonmagnetic metallic layers and magnetic materials; quite commonly, magnetic insulators. The structural, compositional, and electronic differences between these materials and their integration to form an interface, challenge the control and understanding of the spin transport across it, which is known to be sensitive to sub‐nanometric interface features. Here, the authors review the tremendous progress in material's science achieved during the last few years and illustrate how the spin Hall magnetoresistance can be used as a probe for surface magnetism. The authors end with some views on concerted actions that may allow further progress., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimal Energy Management in a Standalone Microgrid, with Photovoltaic Generation, Short-Term Storage, and Hydrogen Production

  • Cecilia, Andreu
  • Carroquino, Javier
  • Roda, Vicente
  • Costa Castelló, Ramon
  • Barreras Toledo, Félix
© 2020 by the authors., This paper addresses the energy management of a standalone renewable energy system. The system is configured as a microgrid, including photovoltaic generation, a lead-acid battery as a short term energy storage system, hydrogen production, and several loads. In this microgrid, an energy management strategy has been incorporated that pursues several objectives. On the one hand, it aims to minimize the amount of energy cycled in the battery, in order to reduce the associated losses and battery size. On the other hand, it seeks to take advantage of the long-term surplus energy, producing hydrogen and extracting it from the system, to be used in a fuel cell hybrid electric vehicle. A crucial factor in this approach is to accommodate the energy consumption to the energy demand and to achieve this, a model predictive control (MPC) scheme is proposed. In this context, proper models for solar estimation, hydrogen production, and battery energy storage will be presented. Moreover, the controller is capable of advancing or delaying the deferrable loads from its prescheduled time. As a result, a stable and efficient supply with a relatively small battery is obtained. Finally, the proposed control scheme has been validated on a real case scenario., This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). This work has been done with the support of ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3DPeople: Modeling the geometry of dressed humans

  • Pumarola, Albert
  • Sánchez-Riera, Jordi
  • Choi, Gary P. T.
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
Trabajo presentado en el 17th International Conference on Computer Vision, celebrado Seúl (Corea del Sur), del 27 de octubre al 2 de noviembre de 2019, Recent advances in 3D human shape estimation build upon parametric representations that model very well the shape of the naked body, but are not appropriate to represent the clothing geometry. In this paper, we present an approach to model dressed humans and predict their geometry from single images. We contribute in three fundamental aspects of the problem, namely, a new dataset, a novel shape parameterization algorithm and an end-to-end deep generative network for predicting shape. First, we present 3DPeople, a large-scale synthetic dataset with 2.5 Million photo-realistic images of 80 subjects performing 70 activities and wearing diverse outfits. Besides providing textured 3D meshes for clothes and body, we annotate the dataset with segmentation masks, skeletons, depth, normal maps and optical flow. All this together makes 3DPeople suitable for a plethora of tasks., This work is supported in part by an Amazon Research Award, the Croucher Foundation and the Spanish MiNeCo under projects HuMoUR TIN2017-90086-R, ColRobTransp DPI2016-78957-R and María de Maeztu Seal of Excellence MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Absolute humanoid localization and mapping based on IMU Lie group and fiducial markers

  • Fourmy, Mederic
  • Atchuthan, Dinesh
  • Mansard, Nicolas
  • Solà, Joan
  • Flayols, Thomas
Trabajo presentado en el 19th International Conference on Humanoid Robots (Humanoids), celebrado en Toronto (Canadá) del 15 al 17 de octubre de 2019, Current locomotion algorithms in structured (in-door) 3D environments require an accurate localization. The several and diverse sensors typically embedded on legged robots (IMU, coders, vision and/or LIDARS) should make it possible if properly fused. Yet this is a difficult task due to the hetero-geneity of these sensors and the real-time requirement of the control. While previous works were using staggered approaches (odometry at high frequency, sparsely corrected from vision and LIDAR localization), the recent progress in optimal estimation, in particular in visual-inertial localization, is paving the way to a holistic fusion. This paper is a contribution in this direction. We propose to quantify how a visual-inertial navigation system can accurately localize a humanoid robot in a 3D indoor environment tagged with fiducial markers. We introduce a theoretical contribution strengthening the formulation of Forster's IMU pre-integration, a practical contribution to avoid possible ambiguity raised by pose estimation of fiducial markers, and an experimental contribution on a humanoid dataset with ground truth. Our system is able to localize the robot with less than 2 cm errors once the environment is properly mapped. This would naturally extend to additional measurements corresponding to leg odometry (kinematic factors) thanks to the genericity of the proposed pre-integration algebra., This work has been supported by the MEMMO European Union project within the H2020 Program under Grant Agreement No. 780684, the Spanish Ministry of Science, Innovation, and Universities project EB-SLAM (DPI2017-89564-P), by the EU H2020 project GAUSS (DPI2017-89564-P) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Actuator and sensor fault estimation based on a proportional-integral quasi-LPV observer with inexact scheduling parameters

  • Gómez-Peñate, Samuel
  • López-Estrada, Francisco-Ronay
  • Valencia-Palomo, Guillermo
  • Rotondo, Damiano
Trabajo presentado en el 3rd IFAC Workshop on Linear Parameter-Varying Systems, celebrado en Eindhoven (Países Bajos), del 4 al 6 de noviembre de 2019, This paper presents a method for actuator and sensor fault estimation based on a proportional-integral observer (PIO) for a class of nonlinear system described by a polytopic quasi-linear parameter varying (qLPV) mathematical model. Contrarily to the traditional approach, which considers measurable or unmeasurable scheduling parameters, this work proposes a methodology that considers inexact scheduling parameters. This condition is present in many physical systems where the scheduling parameters can be affected by noise, offsets, calibration errors, and other factors that have a negative impact on the measurements. A H¿ performance criterion is considered in the design in order to guarantee robustness against sensor noise, disturbance, and inexact scheduling parameters. Then, a set of linear matrix inequalities (LMIs) is derived by the use of a quadratic Lyapunov function. The solution of the LMI guarantees asymptotic stability of the PIO. Finally, the performance and applicability of the proposed method are illustrated through a numerical experiment in a nonlinear system., This work is supported by Tecnologico Nacional de Mexico and the National Council of Science and Technology (CONACyT). The support is gratefully acknowledged. This work has been also partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Trabajo presentado en el 18th European Control Conference (ECC), celebrado en Nápoles (Italia), del 25 al 28 de junio de 2019, Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells., This work was partially funded by the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially supported by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007). This work has been done with the partial support of ACCIO (Operational Program FEDER Catalunya 2014-2020) through the ´ REFER project (COMRDI15-1-0036-11)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A feedback simulation procedure for real-time control of urban drainage systems

  • Romero Ben, Luis
  • Sun, Congcong
  • Guasch Palma, Ramon
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Cembrano, Gabriela
  • Puig, Vicenç
Trabajo presentado en el 1st IFAC Workshop on Control Methods for Water Resource Systems CMWRS, celebrado en Delft (Países Bajos), los días 19 y 20 de septiembre de 2019, This paper presents a feedback simulation procedure for the real-time control (RTC) of urban drainage systems (UDS) with the aim of providing accurate state evolutions to the RTC optimizer as well as illustrating the optimization performance in a virtual reality. Model predictive control (MPC) has been implemented to generate optimal solutions for the multiple objectives of UDS using a simplified conceptual model. A high-fidelity simulator InfoWorks ICM is used to carry on the simulation based on a high level detailed model of a UDS. Communication between optimizer and simulator is realized in a feedback manner, from which both the state dynamics and the optimal solutions have been implemented through realistic demonstrations. In order to validate the proposed procedure, a real pilot based on Badalona UDS has been applied as the case study., The authors wish to thank the support by the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), also thank the support from Spanish national project DEOCS (DPI2016-76493-C3-3-R). The authors also want to thank Aigües de Barcelona for the financial and technical support. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An LMI-based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan, Adrián
  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Sarrate, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR through the contract FI-AGAUR (ref. 2017FI-B00285) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). This work has also been supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva—Formación (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A review and comparison of ontology-based approaches to robot autonomy

  • Olivares-Alarcos, Alberto
  • Beßler, Daniel
  • Khamis, Alaa
  • Goncalves, Paulo
  • Habib, Maki K.
  • Bermejo-Alonso, Julita
  • Barreto, Marcos
  • Diab, Mohammed
  • Rosell, Jan
  • Quintas, Joao
  • Olszewska, Joanna
  • Nakawala, Hirenkumar
  • Pignaton, Edison
  • Gyrard, Amelie
  • Borgo, Stefano
  • Alenyà, Guillem
  • Beetz, Michael
  • Li, Howard
Within the next decades, robots will need to be able to execute a large variety of tasks autonomously in a large variety of environments. To relax the resulting programming effort, a knowledge-enabled approach to robot programming can be adopted to organize information in re-usable knowledge pieces. However, for the ease of reuse, there needs to be an agreement on the meaning of terms. A common approach is to represent these terms using ontology languages that conceptualize the respective domain. In this work, we will review projects that use ontologies to support robot autonomy. We will systematically search for projects that fulfill a set of inclusion criteria and compare them with each other with respect to the scope of their ontology, what types of cognitive capabilities are supported by the use of ontologies, and which is their application domain., This work was partially funded by the following agencies: Deutsche Forschungsgemeinschaft (DFG) through the Collaborative Research Center EASE (1320); Regional Catalan Agency ACCIO through the RIS3CAT 2016 project SIMBIOTS (COMRDI16-1-0017); Spanish State ´ Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656); Spanish Government through the project DPI2016-80077-R and grant 2017; FCT, through IDMEC, under LAETA, project UID/EMS/50022/2019; Project 0043- EUROAGE-4-E (POCTEP Programa Interreg V-A Spain-Portugal). J. Olszewska was partially supported by Innovate UK.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assistive robotics: Research challenges and ethics education initiatives, Robótica asistencial: retos de investigación e iniciativas educativas en roboética

  • Torras, Carme
[EN]Assistive robotics is a fast growing field aimed at helping healthcarers in hospitals, rehabilitation centers and nursery homes, as well as empowering people with reduced mobility at home, so that they can autonomously fulfill their daily living activities. The need to function in dynamic human-centered environments poses new research challenges: robotic assistants need to have friendly interfaces, be highly adaptable and customizable, very compliant and intrinsically safe to people, as well as able to handle deformable materials. Besides technical challenges, assistive robotics raises also ethical defies, which have led to the emergence of a new discipline: Roboethics. Several institutions are developing regulations and standards, and many ethics education initiatives include contents on human-robot interaction and human dignity in assistive situations. In this paper, the state of the art in assistive robotics is briefly reviewed, and educational materials from a university course on Ethics in Social Robotics and AI focusing on the assistive context are presented., [ES] La robótica asistencial es un campo en rápido crecimiento des-tinado a ayudar a los cuidadores en hospitales, centros de rehabilitación y residencias, así como a capacitar a las personas con movilidad reducida en el hogar, para que puedan realizar de forma autónoma sus activida-des cotidianas. La necesidad de desempeñarse en entornos dinámicos centrados en el ser humano plantea nuevos retos de investigación: los asistentes robóticos deben tener interfaces amigables, ser altamente adaptables y personalizables, muy compatibles y seguros para las perso-nas, así como ser capaces de manejar materiales deformables.Además de los desafíos técnicos, la robótica asistencial plantea también desafíos éticos, que han llevado a la aparición de una nueva disciplina: la roboética. Numerosas instituciones están elaborando reglamentos y normas, y muchas iniciativas de educación en ética incluyen contenidos sobre la interacción humano-robot y la dignidad humana en situaciones de asistencia.En este trabajo se revisa brevemente el estado del arte de la robótica asistencial y se presentan materiales educativos de un curso universitario sobre Ética de la Robótica Social e IA en el contexto asistencial., This work is partly supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme through the project CLOTHIL-DE - CLOTH manIpulation Learning from DEmonstrations (Advanced Grant agreement No 741930), and the Spanish Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detailed 3D face reconstruction from a single RGB image

  • Rotger, Gemma
  • Moreno-Noguer, Francesc
  • Lumbreras, Felipe
  • Agudo Martínez, Antonio
This paper introduces a method to obtain a detailed 3D reconstruction of facial skin from a single RGB image. To this end, we propose the exclusive use of an input image without requiring any information about the observed material nor training data to model the wrinkle properties. They are detected and characterized directly from the image via a simple and effective parametric model, determining several features such as location, orientation, width, and height. With these ingredients, we propose to minimize a photometric error to retrieve the final detailed 3D map, which is initialized by current techniques based on deep learning. In contrast with other approaches, we only require estimating a depth parameter, making our approach fast and intuitive. Extensive experimental evaluation is presented in a wide variety of synthetic and real images, including different skin properties and facial expressions. In all cases, our method outperforms the current approaches regarding 3D reconstruction accuracy, providing striking results for both large and fine wrinkles., This work has been partially supported by the Spanish Ministry of Science and Innovation under projects FireDMMI TIN2014-56919-C3-2- R, BOSSS TIN2017-89723-P, and HuMoUR TIN2017- 90086-R; by the CSIC project R3OBJ 201850I099, and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Online learning and detection of faces with low human supervision

  • Villamizar, Michael
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
We present an efficient,online,and interactive approach for computing a classifier, called Wild Lady Ferns (WiLFs), for face learning and detection using small human supervision. More precisely, on the one hand, WiLFs combine online boosting and extremely randomized trees (Random Ferns) to compute progressively an efficient and discriminative classifier. On the other hand, WiLFs use an interactive human-machine approach that combines two complementary learning strategies to reduce considerably the degree of human supervision during learning. While the first strategy corresponds to query-by-boosting active learning, that requests human assistance over difficult samples in function of the classifier confidence, the second strategy refers to a memory-based learning which uses ¿ Exemplar-based Nearest Neighbors (¿ENN) to assist automatically the classifier. A pre-trained Convolutional Neural Network (CNN) is used to perform ¿ENN with high-level feature descriptors. The proposed approach is therefore fast (WilFs run in 1 FPS using a code not fully optimized), accurate (we obtain detection rates over 82% in complex datasets), and labor-saving (human assistance percentages of less than 20%). As a byproduct, we demonstrate that WiLFs also perform semi-automatic annotation during learning, as while the classifier is being computed, WiLFs are discovering faces instances in input images which are used subsequently for training online the classifier. The advantages of our approach are demonstrated in synthetic and publicly available databases, showing comparable detection rates as offline approaches that require larger amounts of handmade training data., This work is partially supported by the Spanish Ministry of Economy and Competitiveness under projects HuMoUR TIN2017-90086-R, ColRobTransp DPI2016-78957 and María de Maeztu Seal of Excellence MDM- 2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reset control for DC-DC converters: an experimental application

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Power converters in grid connected systems are required to have fast response to ensure the stability of the system. The standard PI controllers used in most power converters are capable of fast response but with significant overshoot. In this paper a hybrid control technique for power converter using a reset PI + CI controller is proposed. The PI + CI controller can overcome the limitation of its linear counterpart (PI) and ensure a fast flat response for power converter. The design, stability and cost of feedback analysis for a DC-DC boost converter employing a PI + CI controller is explored in this work. The simulation and experimental results which confirm the fast, flat response will be presented and discussed., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Government of Spain under Project DPI2016-79278-C2-1-R, MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER).