Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

3D Printing for Dissemination of Maya Architectural Heritage: The Acropolis of La Blanca (Guatemala)

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
[EN] This paper focuses on the use of 3D printing as a tool for the dissemination of Maya architectural heritage. The case study is the Acropolis of La Blanca, the main complex of this archaeological site located in the Peten department, Guatemala. One of the objectives of La Blanca Project was to create a model of the Acropolis as part of the strategy for dissemination and as a didactical resource for the Visitor Center. The documentation of this architectural complex with digital survey techniques allowed to obtain a high-fidelity model of the Acropolis¿ buildings. In order to achieve this goal, it was necessary to develop a methodology for the reverse modelling of the Acropolis, starting from the data obtained by laser scanning. We developed a workflow to create a virtual replica of the Acropolis optimized for 3D printing. This model was first printed in 17 parts by using the FDM technology. Then, it was transported to Guatemala and, finally, it was reassembled and placed at the Visitor Center. Today, this physical replica of the Acropolis is an important resource that allows the visitors to have a complete view of the main complex of the site, which is not easy in the Guatemalan jungle. It also provides an exclusive view of some parts of the Acropolis, already studied by researchers and now protected with a soil layer to ensure their preservation. Moreover, it is a useful resource for supporting dissemination and also serves as a teaching resource for student visitors., This work was funded by the Universitat Politècnica de València through the Research and Development Grants Program (PAID-01-17); by the Spanish Ministry of Science, Innovation and Universities through the Aid Program for predoc contracts for the training of doctors (ref. BES-2015- 071296) and by Generalitat Valenciana through the Santiago Grisolía grants Program (GRISOLIAP/2018/139). This study is also part of the research project Arquitectura Maya: Sistemas Constructivos, Estética Formal, Simbolismo y Nuevas Tecnologías (PGC2018-098904-B-C21-AR), funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Machine-learning-derived predictive score for early estimation of COVID-19 mortality risk in hospitalized patients

  • González-Cebrián, Alba
  • Borràs-Ferrís, Joan
  • Ordovás-Baines, Juan Pablo
  • Hermenegildo-Caudevilla, Marta
  • Climente-Martí, Mónica
  • Vitale, Raffaele
  • Palací-López, Daniel
  • Sierra-Sánchez, Jesús Francisco
  • Saez de la Fuente, Javier
  • Tarazona, Sonia|||0000-0001-5346-1407
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The clinical course of COVID-19 is highly variable. It is therefore essential to predict as early and accurately as possible the severity level of the disease in a COVID-19 patient who is admitted to the hospital. This means identifying the contributing factors of mortality and developing an easy-to-use score that could enable a fast assessment of the mortality risk using only information recorded at the hospitalization. A large database of adult patients with a confirmed diagnosis of COVID-19 (n = 15,628; with 2,846 deceased) admitted to Spanish hospitals between December 2019 and July 2020 was analyzed. By means of multiple machine learning algorithms, we developed models that could accurately predict their mortality. We used the information about classifiers¿ performance metrics and about importance and coherence among the predictors to define a mortality score that can be easily calculated using a minimal number of mortality predictors and yielded accurate estimates of the patient severity status. The optimal predictive model encompassed five predictors (age, oxygen saturation, platelets, lactate dehydrogenase, and creatinine) and yielded a satisfactory classification of survived and deceased patients (area under the curve: 0.8454 with validation set). These five predictors were additionally used to define a mortality score for COVID-19 patients at their hospitalization. This score is not only easy to calculate but also to interpret since it ranges from zero to eight, along with a linear increase in the mortality risk from 0% to 80%. A simple risk score based on five commonly available clinical variables of adult COVID-19 patients admitted to hospital is able to accurately discriminate their mortality probability, and its interpretation is straightforward and useful., The authors acknowledge the support provided by the Spanish Ministry of Science and Innovation (PID2020-119262RB-I00), the Generalitat Valenciana (AICO/2021/111), the UPV Research and Development Support Programme PAID-01-17, and the European Social Fund (ACIF/2018/165).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fuel economy optimization from the interaction between engine oil and driving conditions

  • Tormos, B.|||0000-0002-8852-3783
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bastidas-Moncayo, Kared Sophia
  • Ramirez-Roa, Leonardo Andrés
  • PEREZ, T.
[EN] Low viscosity engine oils have shown to be an effective solution to the fuel consumption reduction target, however, their potential is closely linked to the vehicle and engine design and to the real driving conditions. In this study the interaction between engine oil and driving conditions of two urban routes and one rural route in Spain and the United Kingdom has been put to test with the aim to evaluate their joint effect over fuel economy of a freight transport vehicle. In a first approximation, six different oil formulations, three of them belonging to the new API CK-4 and FA-4 categories and two with molybdenum-based friction modifier, were tested under stationary conditions with a medium-duty diesel engine. Followed by tests under real driving conditions of a freight transport vehicle, developed by means of computer simulations with an adjusted vehicle model, taking the fuel consumption maps of the six oil formulations, vehicle characteristics and the selected driving cycles as inputs to the model. Results of engine bench tests and simulations with oils of lower HTHS viscosity showed fuel consumption reduction values as expected. However unexpected results were found between the oils with molybdenum-based friction modifier added to their formulation., The authors would like to thank to the Spanish Ministerio de Economia y Competitividad for supporting the EFICOIL project (TRA2015-70785-R) and to the program Ayudas de Investigacion y Desarrollo (PAID-01-17) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Variation in flavonoids in a collection of peppers (Capsicum sp.) under organic and conventional cultivation: effect of the genotype, ripening stage, and growing system

  • RIBES MOYA, ANA MARÍA
  • Hellín, Pilar
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Raigón Jiménez, Mª Dolores|||0000-0001-8055-2259
  • Fita, Ana|||0000-0002-8637-5852
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
[EN] BACKGROUND In recent years, the acreage used for organic agriculture and the demand for organic fruit and vegetables have increased considerably. Given this scenario, landraces, such as Capsicum landraces, can provide valuable germplasm. Capsicum peppers are very interesting because of their high phenolic content, and particularly their flavonoid content, which provides a high added value. Moreover, the broad genetic diversity in local varieties expands the opportunities for adaptation to organic production and for exploiting genotype x environment interactions to select peppers with the highest phenolic content. RESULTS In this work, the main flavonoids of peppers were exhaustively evaluated over 2 years in a wide collection of heirlooms, both unripe and fully ripe, under organic and conventional cultivation. The genotype and ripening stage contributed to a high degree to the variation in flavonoids. The growing system influenced this variation to a lesser extent. Luteolin and quercetin showed the highest contributions to total phenolic content (70% and > 20%, respectively) at both ripening stages, while myricetin, apigenin, and kaempferol showed lower contributrions. The average flavonoid content was higher in ripe fruits, and organic management significantly increased the accumulation of total flavonoids and luteolin. Positive correlations between flavonoids were found at both ripening stages, especially between main flavonoids luteolin and quercetin and between kaempferol and quercetin (rho > 0.7). CONCLUSION Genotype x environment interaction enabled the identification of accessions with high flavonoid content grown under organic conditions at both ripening stages, particularly total flavonoids and luteolin at the fully ripe stage. Our results reinforce the importance of a wide genetic variation and of considering different ripening stages and growing conditions for breeding high-quality peppers., This work has been funded by the Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) project RTA2014-00041-C02-02, Fondo Europeo de Desarrollo Regional (FEDER) funds. A.M. Ribes-Moya expresses her gratitude to the Universitat Politecnica de Valencia (UPV) for her scholarship FPI-UPV-2017 (PAID-01-17). The authors also thank the farmers' association Unio de Llauradors i Ramaders (LA UNI) for the arrangement and management of fields - specifically Manuel Figueroa, Rafael Hurtado, Ricard Ballester, and Antonio Munoz, and seed providers P.W. Bosland, S. Lanteri, Francois Jourdan, Santiago Larregla, and the Regulatory Boards of the PDOs and PGIs included in this work. The authors are also grateful for the support of Professor Jaime Prohens with statistical methods.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advantages of using a cooler bypass in the low-pressure exhaust gas recirculation line of a compression ignition diesel engine operating at cold conditions

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Bernal-Maldonado, Miguel Angel
  • Odillard, Laurent
[EN] The low efficiency of the after-treatment systems during the cold start period of the internal combustion engines leads to excessive pollutant emissions levels. To reduce the nitrogen oxide emissions at these conditions, it could be necessary to use the high- and low-pressure exhaust gas recirculation strategies, even operating at low temperatures. This article evaluates the impact of using a low-pressure exhaust gas recirculation cooler bypass in a Euro 6 turbocharged diesel engine running under cold conditions (-7 degrees C). A new compact line fitted with a bypass system for the cooler is used with the aim of accelerating the engine warm-up process as compared to the original low-pressure exhaust gas recirculation line. The system is evaluated following two strategies, first performing exhaust gas recirculation without bypass and then performing exhaust gas recirculation bypassing the cooler. The results show that the activation the low-pressure exhaust gas recirculation from the engine cold start leads to a significant nitrogen oxide emissions reduction. Moreover, the bypass activation leads to increase the engine intake temperature, reducing the engine warm-up time and the CO emissions due to better combustion efficiency. However, the activation of the low-pressure exhaust gas recirculation at low temperatures could produce condensation and fouling deposits on the engine components affecting their life span. These phenomena are visualized using endoscope cameras in order to identify the condensation time and the final conditions of the elements. In addition, a chemical analysis of some condensates collected during the experiments and a comparison versus other species found in the literature is presented., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This study was supported by the "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-17) de la Universitat Politecnica de Valencia.''
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

El Palacio del Gobernador en Uxmal (Yucatán, México): levantamiento integrado de la subestructura, The Palace of the Governor at Uxmal (Yucatan, Mexico): integrated survey of the former structure

  • Montuori, Riccardo
  • Muñoz Cosme, Gaspar|||0000-0002-2285-3173
[EN] The Palace of the Governor (10th century AD) at Uxmal (Yucatán, Mexico), an archaeological site listed as a UNESCO World Heritage Site, is an outstanding example of Maya architecture. The discovery of a former structure within its large stepped platform also makes it a notable example of a building constructed in multiple phases, incorporating at least one preexisting structure into the final volume. This building upon the built practice , characteristic of Maya architecture, permitted many ancient structures to be preserved inside the volume of the superimposed ones. Athough these previous structures offer valuable research opportunities, their documentation requires specific methodologies to accurately record and reference elements that are only partially visible during excavation. This paper presents the integrated survey of a former structure of the Palace of the Governor (8th century AD) within its architectural context, along with the preliminary results derived from its analysis., [ES] El Palacio del Gobernador (Siglo X d.C.) de Uxmal (Yucatán, México), sitio incluido en la Lista del Patrimonio Mundial de la UNESCO, es una de las obras más representativas de la arquitectura maya. El hallazgo de una subestructura dentro de su gran basamento escalonado lo convierte también en un caso singular de edificio construido en varias fases, integrando en su interior al menos un edificio anterior. Esta práctica de construir sobre lo construido, característica de la arquitectura maya, ha permitido la conservación de arquitecturas de épocas precedentes ocultas bajo otras posteriores. Aunque estos edificios ofrecen una valiosa oportunidad para la investigación, su documentación exige metodologías específicas para registrar y referenciar con precisión elementos visibles solo parcialmente durante una excavación. En este trabajo se presenta el levantamiento integrado de la Subestructura del Palacio del Gobernador (Siglo VIII d.C.) en su contexto arquitectónico y los primeros resultados derivados de su análisis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Viroids: Non-Coding Circular RNAs Able to Autonomously Replicate and Infect Higher Plants

  • Ortola, Beltrán
  • Daròs, José-Antonio|||0000-0002-6535-2889
[EN] Viroids are a unique type of infectious agent, exclusively composed of a relatively small (246¿430 nt), highly base-paired, circular, non-coding RNA. Despite the small size and non-coding nature, the more-than-thirty currently known viroid species infectious of higher plants are able to autonomously replicate and move systemically through the host, thereby inducing disease in some plants. After recalling viroid discovery back in the late 60s and early 70s of last century and discussing current hypotheses about their evolutionary origin, this article reviews our current knowledge about these peculiar infectious agents. We describe the highly base-paired viroid molecules that fold in rod-like or branched structures and viroid taxonomic classification in two families, Pospiviroidae and Avsunviroidae, likely gathering nuclear and chloroplastic viroids, respectively. We review current knowledge about viroid replication through RNA-to-RNA rolling-circle mechanisms in which host factors, notably RNA transporters, RNA polymerases, RNases, and RNA ligases, are involved. Systemic movement through the infected plant, plant-to-plant transmission and host range are also discussed. Finally, we focus on the mechanisms of viroid pathogenesis, in which RNA silencing has acquired remarkable importance, and also for the initiation of potential biotechnological applications of viroid molecules., This work was supported by grant PID2020-114691RB-I00 from the Spanish Ministerio de Ciencia e Innovación through the Agencia Estatal de Investigación (co-financed European Regional Development Fund). B.O. was the recipient of a predoctoral contract from Universitat Politècnica de València (PAID-01-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Prediction of Inlet Geometry Influence On the In-Duct Acoustics of Small Centrifugal Compressors

  • Broatch, A.|||0000-0001-9991-1039
  • Navarro, Roberto|||0000-0003-2587-4954
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Roig, Ferran
[EN] Small centrifugal compressors are employed to boost automotive internal combustion engines or hydrogen fuel cells, amongst other applications. In many scopes, the overall intensity and quality of noise emission is a major concern, so many researchers develop and assess numerical models to predict acoustic spectra. In this work, Detached Eddy Simulations (DES) of a vaneless centrifugal compressor are conducted to assess the impact of intake geometries on its aeroacoustic performance. Experimental measurements are employed as a means of validation. Flow field analysis and Dynamic Mode Decomposition allow us to analyze the underlying mechanisms of the most relevant acoustic features. This work provides insight into the implications for noise generation of employing tight elbows due to packaging constraints., Spanish Ministerio de-Economia y Competitividad (Grant No. DPI2015-70464-R; Funder ID: 10.13039/501100003329).Programa de-Apoyo para la Investigacion y Desarrollo of the Universitat Politecnica de-Valencia (Grant No. PAID-01-17; Funder ID: 10.13039/501100004233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multivariate Six Sigma: A case study in an outpatient pharmaceutical care unit

  • González-Cebrián, Alba
  • Hermenegildo, Marta
  • Climente, Mónica
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Six Sigma strategies for process improvement are widely used in industry and manufactur-ing. The spreading tendency to gather process data about hospital activity is leading to anincrease of process improvement projects in the healthcare context. The complexity of thesedatabases requires upgrading the classical statistical Six Sigma toolkit. In this paper we pre-sent a Six Sigma project carried out in an Outpatient Pharmaceutical Care Unit at HospitalUniversitario Doctor Peset in Valencia (Spain), where we illustrate the benefits of usinglatent variables-based models, specifically Partial Least Squares Regression (PLS), integratingthem into the DMAIC phases of the project., This work was supported by the Universitat Politecnica de Valencia under the program PAID-01-17 and the Valencian regional government research grant: AICO/2021/111, INDOPT4.0.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Self-attention for Twitter sentiment analysis in Spanish

  • González-Barba, José Ángel
  • Pla Santamaría, Ferran
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] This paper describes our proposal for Sentiment Analysis in Twitter for the Spanish language. The main characteristics of the system are the use of word embedding specifically trained from tweets in Spanish and the use of self-attention mechanisms that allow to consider sequences without using convolutional nor recurrent layers. These self-attention mechanisms are based on the encoders of the Transformer model. The results obtained on the Task 1 of the TASS 2019 workshop, for all the Spanish variants proposed, support the correctness and adequacy of our proposal., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R) and the GiSPRO project (PROMETEU/2018/176). Work of Jose-Angel Gonzalez is financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental verification of hydrodynamic similarity in hot flows

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Roig-Villanueva, Ferran
[EN] This paper examines a common hypothesis in the design of internal combustion engine exhaust lines, namely that the ratio of the total pressure drop across the line to the inlet dynamic head should be a function only of the Reynolds number. While incompressible flow theory, provided that some simplifications are considered, is often used in support of this hypothesis, detailed experimental verification in actual exhaust lines is absent from the literature. Production exhaust lines contain non-trivial flow complexities such as muffler devices and catalytic converters and, in the case of high-performance engines, often operate at high temperature and high mass flow conditions, thereby rendering the usual theoretical simplifications doubtful. In this work, a production exhaust line composed of cold and hot ends, featuring a muffler and a catalytic converter, is tested at a variety of conditions. Analysis of the results shows that compressibility corrections must be factored in at certain conditions routinely found in actual high-performance engines, and that for hot ends, laminar flow at the converter monolith channels may pose a challenge to the hydrodynamic similarity hypothesis., The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), [FEDER-ICTS-2012-06]" framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. F. Roig is supported through the Programa de Apoyo para la Investigation y Desarrollo of the Universitat Politecnica de Valencia [PAID-01-17]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Choosing the right loss function for multi-label Emotion Classification

  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • González-Barba, José Ángel
  • Pla Santamaría, Ferran
[EN] Natural Language Processing problems has recently been benefited for the advances in Deep Learning. Many of these problems can be addressed as a multi-label classification problem. Usually, the metrics used to evaluate classification models are different from the loss functions used in the learning process. In this paper, we present a strategy to incorporate evaluation metrics in the learning process in order to increase the performance of the classifier according to the measure we are interested to favor. Concretely, we propose soft versions of the Accuracy, micro-F-1, and macro-F-1 measures that can be used as loss functions in the back-propagation algorithm. In order to experimentally validate our approach, we tested our system in an Emotion Classification task proposed at the International Workshop on Semantic Evaluation, SemEval-2018. Using a Convolutional Neural Network trained with the proposed loss functions we obtained significant improvements both for the English and the Spanish corpora., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R) and the GiSPRO project (PROMETEU/2018/176). Work of Jose-Angel Gonzalez is also financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Commercial polycarbonate track-etched membranes as substrates for low-cost optical sensors

  • Martinez-Perez, Paula
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Porous materials have become one of the best options for the development of optical sensors, since they maximize the interaction between the optical field and the target substances, which boosts the sensitivity. In this work, we propose the use of a readily available mesoporous material for the development of such sensors: commercial polycarbonate track-etched membranes. In order to demonstrate their utility for this purpose, we firstly characterized their optical response in the near-infrared range. This response is an interference fringe pattern, characteristic of a Fabry¿Pérot interferometer, which is an optical device typically used for sensing purposes. Afterwards, several refractive index sensing experiments were performed by placing different concentrations of ethanol solution on the polycarbonate track-etched membranes. As a result, a sensitivity value of around 56 nm/RIU was obtained and the reusability of the substrate was demonstrated. These results pave the way for the development of optical porous sensors with such easily available mesoporous material., This research was funded by the Spanish Government through grant TEC2015-63838-C3-1-R-OPTONANOSENS and the Universitat Politecnica de Valencia through grants PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impacts of the exhaust gas recirculation (EGR) combined with the regeneration mode in a compression ignition diesel engine operating at cold conditions

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Bernal-Maldonado, Miguel Angel
  • Odillard, Laurent
[EN] Internal combustion engines working at cold conditions lead to the production of excessive pollutant emissions levels. The use of the exhaust gas recirculation could be necessary to reduce the nitrogen oxides emissions, even at these conditions. This paper evaluates the impact of using the high-pressure exhaust gas recirculation strategy while the diesel particulate filter is under active regeneration mode on a Euro 6 turbocharged diesel engine running at low ambient temperature (-7 degrees C). This strategy is evaluated under 40 h of operation, 20 of them using the two systems in combination. The results show that the activation of the high-pressure exhaust gas recirculation during the particulate filter regeneration process leads to a 50% nitrogen oxides emissions reduction with respect to a reference case without exhaust gas recirculation. Moreover, the modification of some engine parameters compared to the base calibration, as the exhaust gas recirculation rate, the main fuel injection timing and the post injection quantity, allows to optimize this strategy by reducing the carbon monoxide emissions up to 60%. Regarding the hydrocarbons emissions and fuel consumption, a small advantage could be observed using this strategy. However, the activation of the high-pressure exhaust gas recirculation at low temperatures can produce fouling deposits and condensation on the engine components (valve, cooler, intake manifold, etc.) and can contribute to reach saturation conditions on the particulate filter. For these reasons, the regeneration efficiency is followed during the experiments through the filter status, concluding that the use of low high-pressure exhaust gas recirculation rates in combination with the regeneration mode also allows to clean the soot particles of the particulate filter. These soot depositions are visualized and presented at the end of this work with a brief analysis of the soot characteristics and a quantitative estimation of the total soot volume produced during the experimental campaign., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Authors want to acknowledge the support of "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-17) de la Universitat Politecnica de Valencia.''
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Event-triggered predictor-based control with gain-scheduling and extended state observer for networked control systems

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Cuenca, Ángel|||0000-0003-4466-2666
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Balaguer Garín, Vicente
[EN] This paper investigates the stabilization of Networked Control Systems (NCS) with mismatched disturbances through a novel Event-Triggered Control (ETC), composed of a predictor-feedback scheme and a gain-scheduled Extended State Observer (ESO). The key idea of the proposed control strategy is threefold: (i) to reduce resource usage in the NCS (bandwidth, energy) while maintaining a satisfactory control performance; (ii) to counteract the main negative effects of NCS: time-varying delays, packet dropouts, packet disorder, and (iii) to reject the steady-state error in the controlled output due to mismatched disturbances. Moreover, we address the co-design of the controller/observer gains, together with the event-triggered parameters, by means of Linear Matrix Inequalities (LMI) and Cone Complementarity Linearization (CCL) approaches. Finally, we illustrate the effectiveness of the proposed control synthesis by simulation and experimental results in a Unmanned Aerial Vehicle (UAV) based test-bed platform., This work was partially supported by projects DPI2015-69376-R (Gobierno de España/European Union), Project 2018/B004 (Fundación Universitaria Antonio Gargallo), TIN2014-56158-C4-4-P-AR (Ministerio de Economia y Competitividad, Spain), FPI-UPV 2017 PAID-01-17 (Universitat Politècnica de València) and European Commission as part of Project H2020-SEC-2016-2017, Topic: SEC-20-BES-2016-Id: 740736- C2 Advanced Multi-domain Environment and Live Observation Technologies .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Documentation of the 6J2-Sub2 Building in the Acropolis of La Blanca (Guatemala): methodologies, workflow and results.

  • Montuori, Riccardo
  • Muñoz Cosme, Gaspar|||0000-0002-2285-3173
[EN] Superposition of buildings from different periods is a distinctive feature of Maya architecture. The Maya often built new structures directly over the preexisting ones, using volume to achieve larger buildings. This "building upon the built practice" permitted many ancient structures to be pre- served inside the volume of the superimposed ones. The documentation of these former structures is an intricate challenging process. Digital survey technologies can give a significant contribution providing highly accurate records. In order to enhance the importance of digitation of Maya architecture, we present the results of the digital documentation of the Building 6J2-Sub2, an earlier structure included in the Acropolis of La Blanca (Peten, Guatemala), and we detail the specific methodology and workflow developed for it., This work was funded by the Universitat Politècnica de València through the Research and Development Grants Program (PAID-01-17). This study is also part of the research project Arquitectura Maya: Sistemas Constructivos, Estética Formal, Simbolismo y Nuevas Tecnologías (PGC2018- 098904-B-C21-AR; IP Gaspar Muñoz Cosme), funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Summarization of Spanish Talk Shows with Siamese Hierarchical Attention Networks

  • González-Barba, José Ángel
  • Segarra Soriano, Encarnación
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • García-Granada, Fernando|||0000-0003-2213-4213
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
[EN] In this paper, we present an approach to Spanish talk shows summarization. Our approach is based on the use of Siamese Neural Networks on the transcription of the show audios. Specifically, we propose to use Hierarchical Attention Networks to select the most relevant sentences for each speaker about a given topic in the show, in order to summarize his opinion about the topic. We train these networks in a siamese way to determine whether a summary is appropriate or not. Previous evaluation of this approach on summarization task of English newspapers achieved performances similar to other state-of-the-art systems. In the absence of enough transcribed or recognized speech data to train our system for talk show summarization in Spanish, we acquire a large corpus of document-summary pairs from Spanish newspapers and we use it to train our system. We choose this newspapers domain due to its high similarity with the topics addressed in talk shows. A preliminary evaluation of our summarization system on Spanish TV programs shows the adequacy of the proposal., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R). Work of Jose-Angel Gonzalez is financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanistic investigation of Ca2+ alternans in human heart failure and its modulation by fibroblasts

  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Gomez, Juan F.
  • Morley, Gregory
[EN] Heart failure (HF) is characterized, among other factors, by a progressive loss of contractile function and by the formation of an arrhythmogenic substrate, both aspects partially related to intracellular Ca2+ cycling disorders. In failing hearts both electrophysiological and structural remodeling, including fibroblast proliferation, contribute to changes in Ca2+ handling which promote the appearance of Ca2+ alternans (Ca-alt). Ca-alt in turn give rise to repolarization alternans, which promote dispersion of repolarization and contribute to reentrant activity. The computational analysis of the incidence of Ca2+ and/or repolarization alternans under HF conditions in the presence of fibroblasts could provide a better understanding of the mechanisms leading to HF arrhythmias and contractile function disorders. Methods and findings The goal of the present study was to investigate in silico the mechanisms leading to the formation of Ca-alt in failing human ventricular myocytes and tissues with disperse fibroblast distributions. The contribution of ionic currents variability to alternans formation at the cellular level was analyzed and the results show that in normal ventricular tissue, altered Ca2+ dynamics lead to Ca-alt, which precede APD alternans and can be aggravated by the presence of fibroblasts. Electrophysiological remodeling of failing tissue alone is sufficient to develop alternans. The incidence of alternans is reduced when fibroblasts are present in failing tissue due to significantly depressed Ca2+ transients. The analysis of the underlying ionic mechanisms suggests that Ca-alt are driven by Ca2+-handling protein and Ca2+ cycling dysfunctions in the junctional sarcoplasmic reticulum and that their contribution to alternans occurrence depends on the cardiac remodeling conditions and on myocyte-fibroblast interactions. Conclusion It can thus be concluded that fibroblasts modulate the formation of Ca-alt in human ventricular tissue subjected to heart failure-related electrophysiological remodeling. Pharmacological therapies should thus consider the extent of both the electrophysiological and structural remodeling present in the failing heart., This work was partially supported by the Plan Estatal de Investigación Científica y Técnica y de Innovación 2013 2016" from the Ministerio de Economía, Industria y Competitividad of Spain and Fondo Europeo de Desarrollo Regional (FEDER) DPI2016-75799-R (AEI/FEDER, UE), and by the Programa de Ayudas de Investigación y Desarrollo (PAID-01-17) from the Universitat Politècnica de València. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improved fleet operation and maintenance through the use of low viscosity engine oils: fuel economy and oil performance

  • Macian Martinez, Vicente
  • Bastidas-Moncayo, Kared Sophia
  • Pérez, Tomás
  • Tormos, B.|||0000-0002-8852-3783
[EN] For heavy-duty vehicles and road transportation, fuel consumption and associated CO2 emissions have been of great concern, which has led to the development and implementation of technologies to reduce their impact on the environment. Low viscosity engine oils have arisen as one proven cost-effective solution to increase the engine efficiency; however, for the heavy-duty vehide segment, engine protection against wear is a priority for end-users, and therefore there is some reluctance to the use of that new oil formulations. In this study, eight lubricant oils, representative of the HTHS viscosity reduction that heavy-duty oils have been undergoing and new API CK-4 and FA-4 categories, were evaluated for fuel economy, oil performance and engine wear, in a long-term test involving a fleet of 49 heavy-duty vehicles of four different engine technologies, some of them with diesel fuel and others with compressed natural gas. Results of fuel economy were positive for most of the buses' models. Regarding oil performance and wear, most of the formulations were found to be suitable for extended oil drain intervals (ODI); and although no alarming results were found, overall performance of the formulations of the fourth stage could lead to significant wear if the oil drain interval is extended. In this study, it should be noted that some of the information has been presented by the authors in other publications, here they are presented with the purpose of complementing the new results and summarize the entire test., Author Sophia Bastidas would like to thank the support of the program Ayudas de Investigacion y Desarrollo (PAID-01-17) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Applying Siamese Hierarchical Attention Neural Networks for multi-document summarization

  • González-Barba, José Ángel
  • Julien Delonca
  • Segarra Soriano, Encarnación
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
  • García-Granada, Fernando|||0000-0003-2213-4213
[EN] In this paper, we present an approach to multi-document summarization based on Siamese Hierarchical Attention Neural Networks. The attention mechanism of Hierarchical Attention Networks, provides a score to each sentence in function of its relevance in the classification process. For the summarization process, only the scores of sentences are used to rank them and select the most salient sentences. In this work we explore the adaptability of this model to the problem of multi-document summarization (typically very long documents where the straightforward application of neural networks tends to fail). The experiments were carried out using the CNN/DailyMail as training corpus, and the DUC-2007 as test corpus. Despite the difference between training set (CNN/DailyMail) and test set (DUC-2007) characteristics, the results show the adequacy of this approach to multi-document summarization., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R). Work of Jose-Angel Gonzalez is also financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extractive summarization using siamese hierarchical transformer encoders

  • González-Barba, José Ángel
  • Segarra Soriano, Encarnación
  • García-Granada, Fernando|||0000-0003-2213-4213
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] In this paper, we present an extractive approach to document summarization, the Siamese Hierarchical Transformer Encoders system, that is based on the use of siamese neural networks and the transformer encoders which are extended in a hierarchical way. The system, trained for binary classification, is able to assign attention scores to each sentence in the document. These scores are used to select the most relevant sentences to build the summary. The main novelty of our proposal is the use of self-attention mechanisms at sentence level for document summarization, instead of using only attentions at word level. The experimentation carried out using the CNN/DailyMail summarization corpus shows promising results in-line with the state-of-the-art., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R). Work of Jose Angel Gonzalez is also financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intron-assisted, viroid-based production of insecticidal circular double-stranded RNA in Escherichia coli

  • Ortolá-Navarro, Beltrán
  • Cordero, Teresa
  • Hu, Xu
  • Daròs, José-Antonio|||0000-0002-6535-2889
[EN] RNA interference (RNAi) is a natural mechanism for protecting against harmful genetic elements and regulating gene expression, which can be artificially triggered by the delivery of homologous double-stranded RNA (dsRNA). This mechanism can be exploited as a highly specific and environmentally friendly pest control strategy. To this aim, systems for producing large amounts of recombinant dsRNA are necessary. We describe a system to efficiently produce large amounts of circular dsRNA in Escherichia coli and demonstrate the efficient insecticidal activity of these molecules against Western corn rootworm (WCR, Diabrotica virgifera virgifera LeConte), a highly damaging pest of corn crops. In our system, the two strands of the dsRNA are expressed in E. coli embedded within the very stable scaffold of Eggplant latent viroid (ELVd), a small circular non-coding RNA. Stability in E. coli of the corresponding plasmids with long inverted repeats was achieved by using a cDNA coding for a group-I autocatalytic intron from Tetrahymena thermophila as a spacer. RNA circularization and large-scale accumulation in E. coli cells was facilitated by co-expression of eggplant tRNA ligase, the enzyme that ligates ELVd during replication in the host plant. The inserted intron efficiently self-spliced from the RNA product during transcription. Circular RNAs containing a dsRNA moiety homologous to smooth septate junction 1 (DvSSJ1) gene exhibited excellent insecticide activity against WCR larvae. Finally, we show that the viroid scaffold can be separated from the final circular dsRNA product using a second T. thermophila self-splicing intron in a permuted form., This work was supported by the Ministerio de Ciencia e Innovacion (Spain; co-financed by the European Regional Development Fund) [BIO2017-83184-R] and [BIO2017-91865-EXP]; Universitat Politecnica de Valencia [PAID-01-17]. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

RadarTSR: A new algorithm for cellwise and rowwise outlier detection and missing data imputation

  • González-Cebrián, Alba
  • Folch-Fortuny, Abel
  • Arteaga, Francisco
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] High-dimensional and multivariate data sets often contain missing data and/or cellwise/rowwise outliers. Whereas several solutions have been proposed to deal with each one of these issues independently, the number of suitable techniques that simultaneously confront these phenomena is drastically reduced. In this paper, we introduce RadarTSR, a Robust Adaptation for Data with Anomalous Rows and/or cells of the Trimmed Scores Regression method, which is based on a Principal Component Analysis (PCA). RadarTSR detects cellwise and rowwise outliers, imputes missing data without the harmful effect of outliers, and, if grouped rowwise outliers are detected, RadarTSR imputes them with their own model. The performance of RadarTSR is compared to the MacroPCA algorithm; as far as we are concerned, the only proposal that deals with missing data and contemplates these two different types of outliers. Several simulated and real data sets are used. The RadarTSR code is available in Matlab., This research was funded by MCIN/AEI/10.13039/501100011033 grant ref. PID2020-119262RB-I00, Generalitat Valenciana grant ref. CIAICO/2021/111, and Universitat Politecnica de Valencia grant ref. PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

How to Simulate Outliers with the Desired Properties

  • González-Cebrián, A.
  • Arteaga, Francisco
  • Folch-Fortuny, Abel
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Deviating multivariate observations are used typically to test the performance of outlier detection methods. Yet, the generation of outlying cases itself usually appears as a secondary methodological step in methods comparison. In the literature, outliers are defined using certain distribution parameters which differ from those of the clean or reference data. However, these parameters change among authors, leading to a lack of a standard and measurable definition of the characteristics simulated outliers. This makes the comparison between methods hard and its results dependent on the procedure followed to simulate the data. In order to set a standard procedure, a framework to simulate outliers is defined here. Since it is based on certain specifications for both the Squared Prediction Error (SPE) and Hotelling's T2 statistics from a Principal Component Analysis (PCA) model, tuning them becomes a simple and efficient task. This procedure has been implemented in a set of Matlab functions., Financial support was granted by the Research and Development Support Programme PAID-01-17 of the UPV and also by the Spanish Ministry of Economy and Competitiveness under the project DPI2017-82896-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Refrigerant charge distribution in brine-to-water heat pump using R290 as refrigerant, Distribution de la charge en frigorigène dans une pompe à chaleur saumure/eau utilisant le R290 comme frigorigène

  • Sánchez-Moreno-Giner, Luis
  • Methler, Timo
  • Barceló Ruescas, Francisco|||0000-0002-0577-2662
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
[EN] This paper presents experimental results from a brine-to-water heat pump used for space heating at low tem-perature, with a low refrigerant charge of R290 (propane). Performance and refrigerant distribution were ana-lysed in every test condition studied. Performance results show a declared heating capacity of 9.5 kW, obtaining a specific capacity (C-c) of 48.7 kW rmkg(-1) and a seasonal coefficient of performance of 4.01. In terms of refrigerant distribution, at the nominal point, 41.5% of the refrigerant is located in the compressor, mainly dissolved in the oil, and the rest is separated almost evenly in both heat exchangers, 23.9% in the condenser and 27.8% in the evaporator; having the lines and accessories (pneumatic-ball valves) the remaining 6.8%. Due to this fact, reducing oil solubility by heating the crankcase or increasing the superheat (SH) has a positive impact on the refrigerant charge reduction, but it also affects the coefficient of performance., The authors would like to acknowledge the Spanish "MINISTERIO DE CIENCIA E INNOVACION", through the project ref- PID2020-115665RB-I00 "Descarbonizacion de Edificios e Industrias con sistemas híbridos de bomba de Calor" for the given support. The authors also would like to acknowledge the "Conselleria dInnovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana" through the Project "AICO/2021/078" for the given support. Also, the study presented in this paper received funding from the German Federal Ministry of Economic Affairs and Climate Action (BMWK) under the grant agreement numbers FKZ 03EN4001A (LC150) . Lastly, the experimental campaign was performed during an international stay financed by "Ayudas para movilidad de estudiantes de Doctorado de la Universitat Politecnca de Valencia" during the doctoral thesis financed by (PAID -01-17)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

EGR cylinder deactivation strategy to accelerate the warm-up and restart processes in a Diesel engine operating at cold conditions

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Bernal-Maldonado, Miguel Angel
  • Odillard, Laurent
[EN] The aftertreatment systems used in internal combustion engines need high temperatures for reaching its maximum efficiency. By this reason, during the engine cold start period or engine restart operation, excessive pollutant emissions levels are emitted to the atmosphere. This paper evaluates the impact of using a new cylinder deactivation strategy on a Euro 6 turbocharged diesel engine running under cold conditions (-7 degrees C) with the aim of improving the engine warm-up process. This strategy is evaluated in two parts. First, an experimental study is performed at 20 degrees C to analyze the effect of the cylinder deactivation strategy at steady-state and during an engine cold start at 1500 rpm and constant load. In particular, the pumping losses, pollutant emissions levels and engine thermal efficiency are analyzed. In the second part, the engine behavior is analyzed at steady-state and transient conditions under very low ambient temperatures (-7 degrees C). In these conditions, the results show an increase of the exhaust temperatures of around 100 degrees C, which allows to reduce the diesel oxidation catalyst light-off by 250 s besides of reducing the engine warm-up process in approximately 120 s. This allows to reduce the CO and HC emissions by 70% and 50%, respectively, at the end of the test., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Authors want to acknowledge the support of "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-17) de la Universitat Politecnica de Valencia''.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Continuous Detection of Increasing Concentrations of Thrombin Employing a Label-Free Photonic Crystal Aptasensor

  • Martinez-Perez, Paula
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Griol Barres, Amadeu
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • Bellieres, Laurent Christophe
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Thrombin generation is a complex and finely regulated pathway that provokes dynamical changes of thrombin concentration in blood when a vascular injury occurs. In order to characterize the initiation phase of such process, when thrombin concentration is in the nM range, a label-free optical aptasensor is proposed here. This aptasensor combines a 1D photonic crystal structure consisting of a silicon corrugated waveguide with thrombin binding aptamers on its surface as bioreceptors. As a result, this aptasensor has been demonstrated to specifically detect thrombin concentrations ranging from 270 pM to 27 nM with an estimated detection limit of 33.5 pM and a response time of ~2 min. Furthermore, it has also been demonstrated that this aptasensor is able to continuously respond to consecutive increasing concentrations of thrombin and to detect binding events as they occur. All these features make this aptasensor a good candidate to continuously study how thrombin concentration progressively increases during the initiation phase of the coagulation cascade., This research was supported by a co-financed action by the European Union through the operational program of the European Regional Development Fund (FEDER) of the Valencian Community 2014-2020, the Generalitat Valenciana through the PROMETEO project AVANTI/2019/123 and by Universitat Politecnica de Valencia through grants PAID-01-17 and the project OCUSENSOR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Constructive Analysis of Maya Vaulted Architecture from Photogrammetric Survey

  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
[EN] Studying Maya architecture from a constructive perspective reveals new insights into the ancient building techniques and processes. Gaining deep knowledge of these structures is key to assessing the current conservation state of the buildings and to designing strategies for the excavation and preservation of this heritage. In order to study the Maya vault system, considering its regional variants and technical development over time, we performed field data collections at 48 Maya Lowlands archaeological sites with the aim of documenting and comparing constructive techniques from different areas and chronological periods. Surveying some of these buildings with digital photogrammetry made it possible to obtain geometrically accurate models with a high-quality texture that were used to measure, analyze and compare the features of the vaults in detail. The main advantage of this survey methodology is that it permits to achieve a high amount of information with affordable instruments. From the models obtained, a thorough analysis of stonemasonry techniques, stereotomy solutions and building processes was carried out, considering their implications for the stability and conservation of the structures. This paper presents the survey methodology used and an example of the constructive analysis of a vaulted building from a photogrammetric model., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the Aid Program for pre-doc contracts for training of doctors (ref. BES-2015-071296); by the Universitat Politècnica de València through the Research and Development Grants Program (PAID-01-17) and by Generalitat Valenciana through the Santiago Grisolía grants Program (GRISOLIAP/2018/139). The study is part of the research project Arquitectura Maya: Sistemas Constructivos, Estética Formal, Simbolismo y Nuevas Tecnologías (PGC2018-098904-B-C21- AR), funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a floating liner test rig and lubrication model for the study of the piston compression ring friction force under fully flooded and starved lubrication

  • Macian Martinez, Vicente
  • Bastidas-Moncayo, Kared Sophia
  • Tormos, B.|||0000-0002-8852-3783
  • Bermúdez, Vicente|||0000-0002-2781-5598
[EN] Advances in internal combustion engines make it necessary to study in depth their contribution to engine efficiency, and thus to friction mechanical losses, especially those generated in the piston-cylinder liner assembly. In this paper, the design of a novel test rig is presented, based on the floating liner principle, with the key objective of having the capability of developing multiple parameters tests in a relatively quick and easy way. The final design integrates a single-cylinder internal combustion engine, a mechanical solution that allows the liner to float, three piezoelectric force sensors and a novel design of lateral support based on ball transfer units. Reproducibility and repeatability of tests were assessed demonstrating the capability of the test rig to develop reliable friction measurements. Some parameters tests were developed to evaluate the sensitivity of the friction force measurements to variations in the working conditions, oil temperature and engine speed. A theoretical model for the piston compression ring is presented for both fully flooded and starved lubrication conditions, including asperity interactions and lubricant rheology. Comparisons of these approaches with experimental results showed that, for the working conditions of the test rig, lubrication of the compression ring is better estimated under fully flooded lubrication condition, as the starved lubrication analysis results in over-estimated friction force values at higher engine speed regimes., Author Sophia Bastidas would like to thank to the support of the program Ayudas de Investigacion y Desarrollo (PAID-01-17) of the Universitat Politecnica de Valencia, Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MLLP-VRAIN Spanish ASR Systems for the Albayzín-RTVE 2020 Speech-to-Text Challenge: Extension

  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Pérez-González de Martos, Alejandro Manuel
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the automatic speech recognition (ASR) systems built by the MLLP-VRAIN research group of Universitat Politècnica de València for the Albayzín-RTVE 2020 Speech-to-Text Challenge, and includes an extension of the work consisting of building and evaluating equivalent systems under the closed data conditions from the 2018 challenge. The primary system (p-streaming_1500ms_nlt) was a hybrid ASR system using streaming one-pass decoding with a context window of 1.5 seconds. This system achieved 16.0% WER on the test-2020 set. We also submitted three contrastive systems. From these, we highlight the system c2-streaming_600ms_t which, following a similar configuration as the primary system with a smaller context window of 0.6 s, scored 16.9% WER points on the same test set, with a measured empirical latency of 0.81 ± 0.09 s (mean ± stdev). That is, we obtained state-of-the-art latencies for high-quality automatic live captioning with a small WER degradation of 6% relative. As an extension, the equivalent closed-condition systems obtained 23.3% WER and 23.5% WER, respectively. When evaluated with an unconstrained language model, we obtained 19.9% WER and 20.4% WER; i.e., not far behind the top-performing systems with only 5% of the full acoustic data and with the extra ability of being streaming-capable. Indeed, all of these streaming systems could be put into production environments for automatic captioning of live media streams., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain's grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & "ERDF A way of making Europe", and FPU scholarships FPU14/03981 and FPU18/04135; the Generalitat Valenciana's research project Classroom Activity Recognition (ref. PROMETEO/2019/111), and predoctoral research scholarship ACIF/2017/055; and the Universitat Politecnica de Valencia's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLATERO: A Calibration Protocol for Plate Reader Green Fluorescence Measurements

  • González-Cebrián, Alba
  • Borràs-Ferrís, Joan
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Ferrer, Alberto|||0000-0001-7244-5947
  • Picó, Jesús|||0000-0003-4144-3521
[EN] One of the most common sources of information in Synthetic Biology is the data coming from plate reader fluorescence measurements. These experiments provide a measure of the light emitted by a certain fluorescent molecule, such as the Green Fluorescent Protein (GFP). However, these measurements are generally expressed in arbitrary units and are affected by the measurement device gain. This limits the range of measurements in a single experiment and hampers the comparison of results among experiments. In this work, we describe PLATERO, a calibration protocol to express fluorescence measures in concentration units of a reference fluorophore. The protocol removes the gain effect of the measurement device on the acquired data. In addition, the fluorescence intensity values are transformed into units of concentration using a Fluorescein calibration model. Both steps are expressed in a single mathematical expression that returns normalized, gain-independent, and comparable data, even if the acquisition was done at different device gain levels. Most important, the PLATERO embeds a Linearity and Bias Analysis that provides an assessment of the uncertainty of the model estimations, and a Reproducibility and Repeatability analysis that evaluates the sources of variability originating from the measurements and the equipment. All the functions used to build the model, exploit it with new data, and perform the uncertainty and variability assessment are available in an open access repository., This research was funded by MCIN/AEI/10.13039/501100011033 grant numbers PID2020-117271RB-C21 and PID2020-119262RB-I00, Generalitat Valenciana grants CIAICO/2021/159 and CIAICO/2021/111, and Universitat Politècnica de València grants PAID-01-17 (AG-C) and PAID10-21 (YB). YB thanks to Secretaría de Educación Superior, Ciencia, Tecnología e Innovación of Ecuador (Scholarship Convocatoria Abierta 2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling and Optimization of a Molecular Biocontroller for the Regulation of Complex Metabolic Pathways

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Santos-Navarro, Fernando Nóbel
[EN] Achieving optimal production in microbial cell factories, robustness against changing intracellular and environmental perturbations requires the dynamic feedback regulation of the pathway of interest. Here, we consider a merging metabolic pathway motif, which appears in a wide range of metabolic engineering applications, including the production of phenylpropanoids among others. We present an approach to use a realistic model that accounts for in vivo implementation and then propose a methodology based on multiobjective optimization for the optimal tuning of the gene circuit parts composing the biomolecular controller and biosensor devices for a dynamic regulation strategy. We show how this approach can deal with the trade-offs between the performance of the regulated pathway, robustness to perturbations, and stability of the feedback loop. Using realistic models, our results suggest that the strategies for fine-tuning the trade-offs among performance, robustness, and stability in dynamic pathway regulation are complex. It is not always possible to infer them by simple inspection. This renders the use of the multiobjective optimization methodology valuable and necessary., This research was funded by MCIN/AEI/10.13039/501100011033 grant number PID 2020-117271RB-C21. YB thanks to Universitat Politècnica de València (Grant PAID-10-21 Acceso al Sistema Español de Ciencia e Innovación), and Secretaría de Educación Superior, Ciencia, Tecnología e Innovación-Ecuador (Scholarship Convocatoria Abierta 2011). FS-N is grateful to grant PAID-01-2017 from Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

TWilBert: Pre-trained deep bidirectional transformers for Spanish Twitter

  • González-Barba, José Ángel
  • Pla Santamaría, Ferran
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] In recent years, the Natural Language Processing community have been moving from uncontextualized word embeddings towards contextualized word embeddings. Among these contextualized architectures, BERT stands out due to its capacity to compute bidirectional contextualized word representations. However, its competitive performance in English downstream tasks is not obtained by its multilingual version when it is applied to other languages and domains. This is especially true in the case of the Spanish language used in Twitter. In this work, we propose TWiLBERT, a specialization of BERT architecture both for the Spanish language and the Twitter domain. Furthermore, we propose a Reply Order Prediction signal to learn inter-sentence coherence in Twitter conversations, which improves the performance of TWilBERT in text classification tasks that require reasoning on sequences of tweets. We perform an extensive evaluation of TWilBERT models on 14 different text classification tasks, such as irony detection, sentiment analysis, or emotion detection. The results obtained by TWilBERT outperform the state-of-the-art systems and Multilingual BERT. In addition, we carry out a thorough analysis of the TWilBERT models to study the reasons of their competitive behavior. We release the pre-trained TWilBERT models used in this paper, along with a framework for training, evaluating, and fine-tuning TWilBERT models., This work has been partially supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades and FEDER founds under project AMIC (TIN2017-85854-C4-2-R), and the Generalitat Valenciana under GiSPRO (PROMETEU/2018/176) and GUAITA (INNVA1/2020/61) projects. Work of Jose Angel Gonzalez is financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cross-Domain Polarity Models to Evaluate User eXperience in E-learning

  • Sanchis-Font, Rosario
  • González-Barba, José Ángel
  • Pla Santamaría, Ferran
  • Castro-Bleda, Maria Jose|||0000-0003-1001-8258
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Virtual learning environments are growing in importance as fast as e-learning is becoming highly demanded by universities and students all over the world. This paper investigates how to automatically evaluate User eXperience in this domain using sentiment analysis techniques. For this purpose, a corpus with the opinions given by a total of 583 users (107 English speakers and 476 Spanish speakers) about three learning management systems in different courses has been built. All the collected opinions were manually labeled with polarity information (positive, negative or neutral) by three human annotators, both at the whole opinion and sentence levels. We have applied our state-of-the-art sentiment analysis models, trained with a corpus of a different semantic domain (a Twitter corpus), to study the use of cross-domain models for this task. Cross-domain models based on deep neural networks (convolutional neural networks, transformer encoders and attentional BLSTM models) have been tested. In order to contrast our results, three commercial systems for the same task (MeaningCloud, Microsoft Text Analytics and Google Cloud) were also tested. The obtained results are very promising and they give an insight to keep going the research of applying sentiment analysis tools on User eXperience evaluation. This is a pioneering idea to provide a better and accurate understanding on human needs in the interaction with virtual learning environments and a step towards the development of automatic tools that capture the feed-back of user perception for designing virtual learning environments centered in user's emotions, beliefs, preferences, perceptions, responses, behaviors and accomplishments that occur before, during and after the interaction., Partially supported by the Spanish MINECO and FEDER founds under Project TIN2017-85854-C4-2-R. Work of J.A. Gonzalez is financed under Grant PAID-01-17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigation on low-speed pre-ignition from the quantification and identification of engine oil droplets release under ambient pressure conditions

  • Tormos, B.|||0000-0002-8852-3783
  • García-Oliver, José M|||0000-0002-2676-9681
  • Bastidas-Moncayo, Kared Sophia
  • Domínguez, Beatriz
  • Oliva, Fermín
  • Cárdenas, Dolores
[EN] One source of low-speed pre-ignition in turbocharged gasoline direct injection engines is the presence of oil droplets in the combustion chamber. In this study, oil droplets released due to the piston reciprocating motion, have been quantified as function of oil viscosity and engine speed, by means of a motored test rig under ambient pressure conditions. Oil droplets were collected using a sandwich-like support and absorbing paper. An image processing methodology was developed to identify critical regions of the piston prone to the appearance of oil. Results show that oil is scrapped by the piston rings and released to the combustion chamber in zones transverse to the piston pin, at speeds as low as 500 rpm. Oil viscosity does not have a determining effect on the oil amount reaching the combustion chamber, while engine speed greatly increases this phenomenon, with a critical point at 2500 rpm and oil temperature of 80 degrees C., Author Sophia Bastidas would like to thank the support of the program Ayudas de Investigacion y Desarrollo (PAID-01-17) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transformaciones en la arquitectura de los grupos E: los casos de Tikal y Uaxactún, Transformations in the Architecture of E-Groups: The Cases of Tikal and Uaxactun

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
[ES] Los grupos E son una tipología muy singular en la arquitectura maya. Estos conjuntos están formados por una plaza central delimitada a un costado por un edificio piramidal, y al otro por una plataforma alargada que generalmente soporta tres estructuras. Esta denominación se originó en Uaxactún, por la nomenclatura otorgada al primer conjunto identificado con tales características. En 1924, Frans Blom observó que, mirando desde la pirámide, era posible ver la alineación del sol sobre las tres estructuras al este durante los solsticios y los equinoccios, y sugirió que podría tratarse de un complejo de observación del ciclo solar. Después, se han realizado diversos estudios arqueológicos y arqueo-astronómicos que han llevado a la formulación de hipótesis diferentes, incluso a veces conflictivas, sobre la posible función de estos conjuntos. Los edificios que forman parte de los grupos E fueron sometidos en el tiempo a varias transformaciones, una práctica muy común en la arquitectura maya que, en muchos casos, comprendía la clausura y el rellenado de las estructuras preexistentes para ser después incorporadas en el volumen del nuevo edificio. Las remodelaciones que los constructores mayas aportaron en el tiempo alteraron tanto las dimensiones como las relaciones espaciales entre los edificios de estos conjuntos, generando una compleja superposición de fases constructivas. En este trabajo analizamos y comparamos desde un punto de vista arquitectónico los edificios de los grupos E de Mundo Perdido en Tikal, y de Uaxactún, centrándonos en su evolución constructiva., [EN] E-Groups are a unique typology in Maya architecture. These complexes consist of a central plaza delimited by a pyramidal building on the one side and by an elongated platform supporting three structures on the other side. Originated in Uaxactun, this denomination came from the nomenclature given to the first group ever identified with such characteristics. The interpretation of E-Groups began in 1924, with Frans Blom¿s studies of what seemed to be a solar cycle observation complex. He observed that, looking from the pyramid, it was possible to see the alignment of the sun over the three structures to the east during the solstices and equinoxes. Several archaeological and archaeoastronomical studies have been carried out ever since, which have led to the formulation of different, sometimes even controversial hypotheses about their possible function. E-Groups¿ buildings suffered various transformations over time, a very common practice in Maya architecture, which in many cases involved the filling and closure of pre-existing structures, later incorporated in the new building. The modifications that Maya builders brought about over time altered both the dimensions and the spatial relations between the buildings in these complexes, thus creating a complex superposition of constructive phases. In this paper, we analyze and compare, from an architectural point of view, the buildings of E-Groups in Mundo Perdido in Tikal and in Uaxactún, focusing on their constructive evolution., Los autores agradecen expresamente el apoyo del Ministerio de Ciencia, Innovación y Universidades de España a través de la financiación del proyecto de investigación "Arquitectura maya. Sistemas constructivos, estética formal, simbolismo y nuevas tecnologías" (PGC2018-098904-B-C21-AR), así como de la Universitat Politècnica de València a través del Programa de Ayudas de Investigación y Desarrollo para la Formación de Personal Investigador (PAID-01-17) y de la Generalitat Valenciana a través del Programa de ayudas Santiago Grisolía (GRISOLIAP/2018/139), que han contribuido de forma determinante a hacer posibles las investigaciones y la obtención de los resultados que se exponen en esta publicación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

RBS and Promoter Strengths Determine the Cell-Growth-Dependent Protein Mass Fractions and Their Optimal Synthesis Rates

  • Santos-Navarro, Fernando Nóbel
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Models of gene expression considering host-circuit interactions are relevant for understanding both the strategies and associated trade-offs that cell endogenous genes have evolved and for the efficient design of heterologous protein expression systems and synthetic genetic circuits. Here, we consider a small-size model of gene expression dynamics in bacterial cells accounting for host-circuit interactions due to limited cellular resources. We define the cellular resources recruitment strength as a key functional coefficient that explains the distribution of resources among the host and the genes of interest and the relationship between the usage of resources and cell growth. This functional coefficient explicitly takes into account lab-accessible gene expression characteristics, such as promoter and ribosome binding site (RBS) strengths, capturing their interplay with the growth-dependent flux of available free cell resources. Despite its simplicity, the model captures the differential role of promoter and RBS strengths in the distribution of protein mass fractions as a function of growth rate and the optimal protein synthesis rate with remarkable fit to the experimental data from the literature for Escherichia coli. This allows us to explain why endogenous genes have evolved different strategies in the expression space and also makes the model suitable for model-based design of exogenous synthetic gene expression systems with desired characteristics., This work was partially supported by grants MINECO/AEI, EU DPI2017-82896-C2-1-R, and MCIN/AEI/10.13039/501100011033 grant number PID2020-117271RB-C21. F.N.S.-N. is grateful to grant PAID-01-2017 (Universitat Politecnica de Valencia). The authors are very grateful to the anonymous reviewers for their comprehensive and in-depth reviews.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Análisis de incertidumbre de las proyecciones climáticas en relación a las aportaciones históricas en la Cuenca del Júcar, Uncertainty analysis of climate projections in relation to historical contributions in the Júcar River Basin

  • Suárez-Almiñana, S.
  • García-Romero, L.
  • Solera Solera, Abel|||0000-0001-7464-3963
  • Andreu Álvarez, Joaquín|||0000-0001-5087-5014
[ES] En este estudio se pretende evaluar el efecto del cambio climático en las aportaciones futuras de la Cuenca del Júcar (este de España) y la incertidumbre asociada a ellas, entendiendo como tal la relacionada con la toma de decisiones en el manejo de las proyecciones climáticas durante todo el proceso evaluado. Para ello se seleccionaron variables meteorológicas de 9 proyecciones climáticas pertenecientes a los escenarios de emisión 4.5 y 8.5, se corrigió el sesgo y se introdujeron en un modelo hidrológico para la simulación de caudales. Finalmente, se evaluó el impacto mediante la comparación de los caudales futuros con el periodo histórico. Dependiendo de los datos históricos que manejemos, el cambio de los caudales futuros puede oscilar de media entre -8% y -28% para final de siglo. Sin embargo, si se tiene en cuenta la posibilidad de comparar con un periodo que represente la situación actual de la cuenca, este cambio se estima entre a un -8% y -13%, permitiendo así obtener conclusiones más concretas sobre el futuro de los recursos hídricos en esta cuenca. , [EN] The aim of this study is to evaluate the effect of climate change on the future contributions of the Júcar River Basin (eastern Spain) and the uncertainty associated to them, which in this case is referred to that derived from the decision taken in the handling of climate projections during the entire evaluation process. For this purpose, meteorological variables were selected from 9 Regional Climate Models belonging to the Representative Concentration Pathways 4.5 and 8.5. Then, they were bias corrected and introduced into a hydrological model for the simulation of flows. Finally, the effect of climate change was evaluated by comparing future flows with those of the historical period. Depending on the historical data we manage, the change in future flows can range from an average of -8% to -28% by the end of the century. However, if the possibility of comparing them with a period that represents the current situation of the basin is considered, this change is estimated between -8% and -13%, thus allowing more concrete conclusions about the future of water resources in this basin., Los autores agradecen a la Agencia Estatal de Investigación (MINECO) por financiar el proyecto “ERAS” (CTM2016-77804-P), cofinanciado con Fondos FEDER. Además, también valoramos el apoyo de la Comunidad Europea en la financiación de los proyectos IMPREX (H2020-WATER-2014–2015, 641811) y SWICCA (ECMRWF-Copernicus-FA 2015/ C3S_441-LOT1/SMHI). También es importante nombrar al Programa de Apoyo para la Investigación y Desarrollo PAID-01-17) de la Universitat Politècnica de València por fomentar y facilitar los contratos de formación de personal investigador. Finalmente, los autores agradecen a AEMET y a la Universidad de Cantabria (UC) los datos aportados para este trabajo (conjunto de datos Spain02 v4, disponibles en http://www.meteo.unican.es/datasets/spain02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mutational Analysis of Eggplant Latent Viroid RNA Circularization by the Eggplant tRNA Ligase in Escherichia coli

  • Cordero-Cucart, María Teresa
  • Ortolá-Navarro, Beltrán
  • Daròs, José-Antonio|||0000-0002-6535-2889
[EN] Eggplant latent viroid (ELVd) is a relatively small non-coding circular RNA that induces asymptomatic infections in eggplants (Solanum melongena L.). Like other viroid species that belong to the family Avsunviroidae, ELVd contains hammerhead ribozymes in the strands of both polarities that self-cleave RNAs producing terminal 5'-hydroxyl and 2', 3'-cyclic phosphodiester groups. Available experimental data indicate that ELVd replicates in the chloroplasts of infected cells through a symmetric rolling-circle mechanism, in which RNA circularization is catalyzed by the chloroplastic isoform of the tRNA ligase. In this work, a mutational analysis was performed to gain insight into the sequence and structural requirements of the tRNA ligase-mediated circularization of ELVd RNAs. In the predicted minimum free energy conformation of the monomeric linear ELVd RNA intermediate of plus (C) polarity, the ligation site is located in the lower part of an opened internal loop, which is present in a quasi-rod-like structure that occupies the center of the molecule. The mutations analyzed herein consisted of punctual nucleotide substitutions and deletions surrounding the ligation site on the upper and lower strands of the ELVd quasi-double-stranded structure. Computational predictions of the mutated ELVd conformations indicated different degrees of distortions compared to the minimum free energy conformation of the wild-type ELVd linear monomer of C polarity. When these mutant RNAs were expressed in Escherichia coli, they were all circularized by the eggplant tRNA ligase with approximately the same efficiency as the wild-type ELVd, except for those that directly affected the ribozyme domain. These results suggest that the viroid ribozyme domains, in addition to self-cleavage, are also involved in the tRNA ligase-mediated circularization of the monomeric linear replication intermediates., This research was supported by grants BIO2014-54269-R and BIO2017-83184-R from the Spanish Ministerio de Economia, Industria y Competitividad (co-financed by FEDER funds). BO is the recipient of a predoctoral contract from Universitat Politecnica de Valencia (PAID-01-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced 2-DOF PID Controller Tuning Based on an Uncertainty and Disturbance Estimator With Experimental Validation

  • Balaguer Garín, Vicente
  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] In this paper a novel tuning procedure for Two-Degree-of-Freedom (2-DOF) PID controllers is proposed. The tuning methodology is based on an Uncertainty and Disturbance Estimator. As a result, an equivalent 2-DOF PID controller with simpler tuning rules is obtained. One advantage of the proposed method is that tracking performance and disturbance rejection can be accommodated separately in control synthesis. Moreover, the trade-off between disturbance rejection and robustness can easily be adjusted by tuning a single parameter without affecting the desired set-point tracking specifications. Numerical comparisons with well-known tuning methods are performed to illustrate the advantages of the proposed method. Finally, the effectiveness of the proposal is experimentally validated in an open-loop unstable plant consisting of a test-bed quadrotor platform., This work was supported by projects FPI-UPV PAID-01-17, Universitat Politecnica de Valencia (Spain), and TIN2017-86520-C3-1-R, Ministerio de Economia y Competitividad (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards cross-lingual voice cloning in higher education

  • Pérez-González de Martos, Alejandro Manuel
  • Jiménez, Manuel
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Giménez Pastor, Adrián
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Juan, Alfons|||0000-0002-9984-4072
[EN] The rapid progress of modern AI tools for automatic speech recognition and machine translation is leading to a progressive cost reduction to produce publishable subtitles for educational videos in multiple languages. Similarly, text-to-speech technology is experiencing large improvements in terms of quality, flexibility and capabilities. In particular, state-of-the-art systems are now capable of seamlessly dealing with multiple languages and speakers in an integrated manner, thus enabling lecturer¿s voice cloning in languages she/he might not even speak. This work is to report the experience gained on using such systems at the Universitat Politècnica de València (UPV), mainly as a guidance for other educational organizations willing to conduct similar studies. It builds on previous work on the UPV¿s main repository of educational videos, MediaUPV, to produce multilingual subtitles at scale and low cost. Here, a detailed account is given on how this work has been extended to also allow for massive machine dubbing of MediaUPV. This includes collecting 59 h of clean speech data from UPV¿s academic staff, and extending our production pipeline of subtitles with a state-of-the-art multilingual and multi-speaker text-to-speech system trained from the collected data. Our main result comes from an extensive, subjective evaluation of this system by lecturers contributing to data collection. In brief, it is shown that text-to-speech technology is not only mature enough for its application to MediaUPV, but also needed as soon as possible by students to improve its accessibility and bridge language barriers., We wish first to thank all UPV lecturers who made this study possi-ble. We are also very grateful for the funding support received by the European Union's Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon) , the Spanish government under grant RTI2018-094879-B-I00 (Multisub, MCIU/AEI/FEDER) , and the Universitat Politecnica de Valencia's, Spain PAID-01-17 R&D sup-port programme. Funding for open access charge: CRUE-Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ca2+ Cycling Impairment in Heart Failure Is Exacerbated by Fibrosis: Insights Gained From Mechanistic Simulations

  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Gómez García, Juan Francisco
  • Sobie, Eric A.
[EN] Heart failure (HF) is characterized by altered Ca2+ cycling, resulting in cardiac contractile dysfunction. Failing myocytes undergo electrophysiological remodeling, which is known to be the main cause of abnormal Ca2+ homeostasis. However, structural remodeling, specifically proliferating fibroblasts coupled to myocytes in the failing heart, could also contribute to Ca2+ cycling impairment. The goal of the present study was to systematically analyze the mechanisms by which myocyte-fibroblast coupling could affect Ca2+ dynamics in normal conditions and in HF. Simulations of healthy and failing human myocytes were performed using established mathematical models, and cells were either isolated or coupled to fibroblasts. Univariate and multivariate sensitivity analyses were performed to quantify effects of ion transport pathways on biomarkers computed from intracellular [Ca2+] waveforms. Variability in ion channels and pumps was imposed and populations of models were analyzed to determine effects on Ca2+ dynamics. Our results suggest that both univariate and multivariate sensitivity analyses are valuable methodologies to shed light into the ionic mechanisms underlying Ca2+ impairment in HF, although differences between the two methodologies are observed at high parameter variability. These can result from either the fact that multivariate analyses take into account ion channels or non-linear effects of ion transport pathways on Ca2+ dynamics. Coupling either healthy or failing myocytes to fibroblasts decreased Ca2+ transients due to an indirect sink effect on action potential and thus on Ca2+ related currents. Simulations that investigated restoration of normal physiology in failing myocytes showed that Ca2+ cycling can be normalized by increasing SERCA and L-type Ca2+ current activity while decreasing Na+-Ca2+ exchange and SR Ca2+ leak. Changes required to normalize action potentials in failing myocytes depended on whether myocytes were coupled to fibroblasts. In conclusion, univariate and multivariate sensitivity analyses are helpful tools to understand how Ca2+ cycling is impaired in heart failure and how this can be exacerbated by coupling of myocytes to fibroblasts. The design of pharmacological actions to restore normal activity should take into account the degree of fibrosis in the failing heart., This work was partially supported by the National Science Foundation (MCB 1615677), the American Heart Association (15GRNT25490006), the "Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2013-2016 from the Ministerio de Economia, Industria y Competitividad of Spain and Fondo Europeo de Desarrollo Regional (FEDER) DPI2016-75799-R (AEI/FEDER, UE)", and the "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-17)" from the Universitat Politecnica de Valencia. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of beta-adrenergic system remodeling in human heart failure: A mechanistic investigation

  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Gong, Jingqi Q. X.
  • Sobie, Eric A.
[EN] ß-adrenergic receptor antagonists (ß-blockers) are extensively used to improve cardiac performance in heart failure (HF), but the electrical improvements with these clinical treatments are not fully understood. The aim of this study was to analyze the electrophysiological effects of ß-adrenergic system remodeling in heart failure with reduced ejection fraction and the underlying mechanisms. We used a combined mathematical model that integrated ß-adrenergic signaling with electrophysiology and calcium cycling in human ventricular myocytes. HF remodeling, both in the electrophysiological and signaling systems, was introduced to quantitatively analyze changes in electrophysiological properties due to the stimulation of ß-adrenergic receptors in failing myocytes. We found that the inotropic effect of ß-adrenergic stimulation was reduced in HF due to the altered Ca2+ dynamics resulting from the combination of structural, electrophysiological and signaling remodeling. Isolated cells showed proarrhythmic risk after sympathetic stimulation because early afterdepolarizations appeared, and the vulnerability was greater in failing myocytes. When analyzing coupled cells, ß-adrenergic stimulation reduced transmural repolarization gradients between endocardium and epicardium in normal tissue, but was less effective at reducing these gradients after HF remodeling. The comparison of the selective activation of ß-adrenergic isoforms revealed that the response to ß2-adrenergic receptors stimulation was blunted in HF while ß1-adrenergic receptors downstream effectors regulated most of the changes observed after sympathetic stimulation. In conclusion, this study was able to reproduce an altered ß-adrenergic activity on failing myocytes and to explain the mechanisms involved. The derived predictions could help in the treatment of HF and guide in the design of future experiments., This work was partially supported by the "Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016" from the Ministerio de Economía, Industria y Competitividad of Spain and Fondo Europeo de Desarrollo Regional (FEDER) DPI2016-75799-R (AEI/FEDER, UE), by the "Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020" from the Ministerio de Ciencia e Innovación y Universidades (PID2019-104356RB-C41/AEI/10.13039/5011000110 33), and by the "Programa de Ayudas de Investigación y Desarrollo (PAID-01-17)" from the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diagnosis of Myalgic Encephalomyelitis/Chronic Fatigue Syndrome With Partial Least Squares Discriminant Analysis: Relevance of Blood Extracellular Vesicles

  • González-Cebrián, Alba
  • Almenar-Pérez, Eloy
  • Xu, Jiabao
  • Yu, Tong
  • Huang, Wei E.
  • Giménez-Orenga, Karen
  • Hutchinson, Sarah
  • Lodge, Tiffany
  • Nathanson, Lubov
  • Morten, Karl J.
  • Oltra, Elisa
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS), a chronic disease characterized by long-lasting persistent debilitating widespread fatigue and post-exertional malaise, remains diagnosed by clinical criteria. Our group and others have identified differentially expressed miRNA profiles in the blood of patients. However, their diagnostic power individually or in combinations seems limited. A Partial Least Squares-Discriminant Analysis (PLS-DA) model initially based on 817 variables: two demographic, 34 blood analytic, 136 PBMC miRNAs, 639 Extracellular Vesicle (EV) miRNAs, and six EV features, selected an optimal number of five components, and a subset of 32 regressors showing statistically significant discriminant power. The presence of four EV-features (size and z-values of EVs prepared with or without proteinase K treatment) among the 32 regressors, suggested that blood vesicles carry relevant disease information. To further explore the features of ME/CFS EVs, we subjected them to Raman micro-spectroscopic analysis, identifying carotenoid peaks as ME/CFS fingerprints, possibly due to erythrocyte deficiencies. Although PLS-DA analysis showed limited capacity of Raman fingerprints for diagnosis (AUC = 0.7067), Raman data served to refine the number of PBMC miRNAs from our previous model still ensuring a perfect classification of subjects (AUC=1). Further investigations to evaluate model performance in extended cohorts of patients, to identify the precise ME/CFS EV components detected by Raman and to reveal their functional significance in the disease are warranted., This study was funded by the Generalitat Valenciana AICO grant number 2020/254 and by a Ramsay Fund MEA (ME Association, UK) grant to EO; by the Research and Development Support Program of the Universitat Politècnica de València (PAID-01- 17) to AF; by the Star Exclusivas SL grant to the UCV Gene expression and immunity group. Erasmus staff mobility to KM and EO. SH was supported by a UK Spine Bridge support grant and KG-O by the Generalitat Valenciana ACIF2021/179 grant. Funders were not involved in any of the research stages.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gain-Scheduled Predictive Extended State Observer for Time-varying Delays Systems with Mismatched Disturbances

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Balaguer Garín, Vicente
[EN] In this paper, a novel control scheme for systems with input and output time-varying delays is provided in discrete-time domain. The control strategy combines predictor-like techniques with a delay-dependent gain-scheduled extended state observer. The main goal is twofold: (i) to minimize the negative effect of time-varying delays in the closed-loop performance and, (ii) to actively compensate the effect of mismatched disturbances in the controlled output. Moreover, a sufficient condition based on Linear Matrix Inequalities (LMI) is provided to obtain the maximum delay interval that ensures the stability of the closed-loop system. Finally, the achieved benefits of the proposal are shown by simulation in open-loop unstable plants, and experimentally validated in a test-bed quadrotor platform. (C) 2018 ISA. Published by Elsevier Ltd. All rights reserved., This work was supported in part by European Commission as part of Project H2020-SEC-2016-2017, Topic: SEC-20-BES-2016 Id: 740736 C2 Advanced Multi-domain Environment and Live Observation Technologies , in part by the Spanish Ministry of Economy, Industry, and Competition under Project TIN2017-86520-C3-1-R, in part by Universitat Politècnica de València under Project FPI-UPV 2017 PAID-01-17, and in part by Spanish Government/European Union Project DPI2015-69376-R (MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Siamese hierarchical attention networks for extractive summarization

  • González-Barba, José Ángel
  • Segarra Soriano, Encarnación
  • García-Granada, Fernando|||0000-0003-2213-4213
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] In this paper, we present an extractive approach to document summarization based on Siamese Neural Networks. Specifically, we propose the use of Hierarchical Attention Networks to select the most relevant sentences of a text to make its summary. We train Siamese Neural Networks using document-summary pairs to determine whether the summary is appropriated for the document or not. By means of a sentence-level attention mechanism the most relevant sentences in the document can be identified. Hence, once the network is trained, it can be used to generate extractive summaries. The experimentation carried out using the CNN/DailyMail summarization corpus shows the adequacy of the proposal. In summary, we propose a novel end-to-end neural network to address extractive summarization as a binary classification problem which obtains promising results in-line with the state-of-the-art on the CNN/DailyMail corpus., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R). Work of Jose-Angel Gonzalez is also financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic mode decomposition of the acoustic field in radial compressors

  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Roig-Villanueva, Ferran
  • Sharma, Sidharath
[EN] Widely recognized since the beginning of air travel as a major issue, noise reduction remains nowadays a pressing concern for all stakeholders in the aviation industry. While aeroengine compressors, specially at the approach phase, have been historically identified as a leading source of noise, most of the research has been conducted on compressors of the axial type. However, radial compressors are found in a wide array of applications: smaller business jets, helicopters, unmanned aerial vehicles (UAVs), auxiliary power units (APUs), turbochargers for reciprocating engines, etc. Owing to their geometrical particularities, radial compressors feature flow patterns that differ from their axial counterparts, leading to different acoustic performance but also opening the door for different optimization approaches. Yet, classical modal decomposition techniques focused on duct propagation may fail to reveal the complex interactions between geometry and flow features that act as noise sources. In this paper we apply, in addition to the classical approach, a data-driven Dynamic Mode Decomposition (DMD) to pressure data coming from a Detached Eddy Simulation (DES), in which we have experimentally validated the correct reproduction of the modal behaviour of the compressor, thus obtaining in-depth details of the link between flow phenomena and noise generation and transmission across the inlet and outlet ducts. (C) 2019 Elsevier Masson SAS. All rights reserved., The equipment used in this work has been partially supported by the Spanish Ministerio de Economía y Competitividad through grant [DPI2015-70464-R] and by FEDER project funds Dotación de infraestructuras científico técnicas para el Centro Integral de Mejora Energética y Medioambiental de Sistemas de Transporte (CiMeT), [FEDER-ICTS-2012-06] framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economía y Competitividad. F. Roig is supported through the Programa de Apoyo para la Investigación y Desarrollo of the Universitat Politècnica de València [PAID-01-17].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gene Expression Space Shapes the Bioprocess Trade-Offs among Titer, Yield and Productivity

  • Santos-Navarro, Fernando Nóbel
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Optimal gene expression is central for the development of both bacterial expression systems for heterologous protein production, and microbial cell factories for industrial metabolite production. Our goal is to fulfill industry-level overproduction demands optimally, as measured by the following key performance metrics: titer, productivity rate, and yield (TRY). Here we use a multiscale model incorporating the dynamics of (i) the cell population in the bioreactor, (ii) the substrate uptake and (iii) the interaction between the cell host and expression of the protein of interest. Our model predicts cell growth rate and cell mass distribution between enzymes of interest and host enzymes as a function of substrate uptake and the following main lab-accessible gene expression-related characteristics: promoter strength, gene copy number and ribosome binding site strength. We evaluated the differential roles of gene transcription and translation in shaping TRY trade-offs for a wide range of expression levels and the sensitivity of the TRY space to variations in substrate availability. Our results show that, at low expression levels, gene transcription mainly defined TRY, and gene translation had a limited effect; whereas, at high expression levels, TRY depended on the product of both, in agreement with experiments in the literature., This research was partially supported by grants MINECO/AEI, EU DPI2017-82896-C21-R 662 and MICINN/AEI, EU PID2020-117271RB-C21. F.N.S.-N. thanks the UPV grant number PAID-01-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermodynamic assessment of ultra-low-global warming potential refrigerants for space and water heaters

  • Sánchez-Moreno-Giner, Luis
  • López-Juárez, Emilio
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
  • Hassan, Abdelrahman|||0000-0001-9063-9569
[EN] The current paper studies the most suitable ultra-low-global warming potential (GWP) (GWP < 30) candidates in the market, considering also its grade of flammability and toxicity, for heat pumps employed for different space heating and domestic hot water (DHW) applications. A pre-design thermodynamic model has been developed to evaluate the performance and size limits for any subcritical or transcritical heat pump under certain working conditions. This generic model is based on the pinch point approach, so it does not depend on a certain type of heat exchangers, it only depends on the external working conditions. The results showed that all subcritical ultra-low-GWP, nonflammable, and nontoxic refrigerants considered have either lower coefficient of performance (COP) or volumetric heating capacity (VHC) compared with the reference high-GWP refrigerants R-410A and R-134a. Additionally, the only refrigerants with higher COP, such as R-717 (ammonia) or R-290 (propane), are either extremely flammable or toxic. For the applications need of high water-side temperature lift, the transcritical refrigerants R-744 (CO2) and R-170 (ethane) showed the best performance, regarding both COP and VHC values, of all the refrigerants studied. The refrigerants R-161, R-1270 (propylene), and R-1234yf presented a balanced performance in both space heating and DHW applications. This makes them potential candidates to be employed in subcritical multi-temperature levels heat pumps., This work was partially supported by the Research and Development Aid Program (PAID-01-17) of the Universitat Politecnica de Valencia for receiving the Research Fellowship FPI-UPV-2017. The authors also would like to acknowledge the financial support provided by the Ministerio de Ciencia, Innovacion y Universidades de Espana for the project "Maximizacion de la eficiencia y minimizacion del impacto ambiental de bombas de calor para la descarbonizacion de la calefaccion/acs en los edificios de consumo casi nulo" (ENE2017-83665-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transformer based contextualization of pre-trained word embeddings for irony detection in Twitter

  • González-Barba, José Ángel
  • Pla Santamaría, Ferran
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Human communication using natural language, specially in social media, is influenced by the use of figurative language like irony. Recently, several workshops are intended to explore the task of irony detection in Twitter by using computational approaches. This paper describes a model for irony detection based on the contextualization of pre-trained Twitter word embeddings by means of the Transformer architecture. This approach is based on the same powerful architecture as BERT but, differently to it, our approach allows us to use in-domain embeddings. We performed an extensive evaluation on two corpora, one for the English language and another for the Spanish language. Our system was the first ranked system in the Spanish corpus and, to our knowledge, it has achieved the second-best result on the English corpus. These results support the correctness and adequacy of our proposal. We also studied and interpreted how the multi-head self-attention mechanisms are specialized on detecting irony by means of considering the polarity and relevance of individual words and even the relationships among words. This analysis is a first step towards understanding how the multi-head self-attention mechanisms of the Transformer architecture address the irony detection problem., This work has been partially supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades and FEDER founds under project AMIC (TIN2017-85854-C4-2-R) and the GiSPRO project (PROMETEU/2018/176). Work of Jose-Angel Gonzalez is financed by Universitat Politecnica de Valencia under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing the effectiveness of goal-oriented modeling languages: A family of experiments

  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
  • Insfran, Emilio|||0000-0003-0855-5564
  • González-Ladrón-de-Guevara, Fernando|||0000-0002-2617-1559
  • Fernández-Diego, Marta|||0000-0001-7340-2789
  • Cano-Genoves, Carlos
  • Pereira de Oliveira, Raphael
[EN] Context Several goal-oriented languages focus on modeling stakeholders' objectives, interests or wishes. However, these languages can be used for various purposes (e.g., exploring system solutions or evaluating alternatives), and there are few guidelines on how to use these models downstream to the software requirements and design artifacts. Moreover, little attention has been paid to the empirical evaluation of this kind of languages. In a previous work, we proposed value@GRL as a specialization of the Goal Requirements Language (GRL) to specify stakeholders' goals when dealing with early requirements in the context of incremental software development. Objective: This paper compares the value@GRL language with the i* language, with respect to the quality of goal models, the participants' modeling time and productivity when creating the models, and their perceptions regarding ease of use and usefulness. Method: A family of experiments was carried out with 184 students and practitioners in which the participants were asked to specify a goal model using each of the languages. The participants also filled in a questionnaire that allowed us to assess their perceptions. Results: The results of the individual experiments and the meta-analysis indicate that the quality of goal models obtained with value@GRL is higher than that of i*, but that the participants required less time to create the goal models when using i*. The results also show that the participants perceived value@GRL to be easier to use and more useful than i* in at least two experiments of the family. Conclusions: value@GRL makes it possible to obtain goal models with good quality when compared to i*, which is one of the most frequently used goal-oriented modeling languages. It can, therefore, be considered as a promising emerging approach in this area. Several insights emerged from the study and opportunities for improving both languages are outlined., This work was supported by the Spanish Ministry of Science, Innovation and Universities (Adapt@Cloud project, grant number TIN2017-84550-R) and the Programa de Ayudas de Investigación y Desarrollo (PAID-01-17) from the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-pressure exhaust gas recirculation line condensation model of an internal combustion diesel engine operating at cold conditions

  • Luján, José M.|||0000-0001-6133-8943
  • Dolz, Vicente|||0000-0003-1511-6957
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Bernal-Maldonado, Miguel Angel
[EN] To fulfill the future NOx emission regulations, the use of exhaust gas recirculation could be necessary for the engine starting at cold conditions. In this context, condensation inside the exhaust gas recirculation line could appear, affecting in several ways the engine components and their life span. In this article, a mathematical model is developed with the aim of predicting the conditions that produce the condensation phenomenon to appear inside the exhaust gas recirculation circuits of an internal combustion engine working at low ambient temperatures (-7 degrees C). In particular, the humidity ratio and the internal engine conditions that characterize the appearance of this phenomenon are estimated by the model. The model is validated by experimentally visualizing the condensation behavior along a representative driving cycle by means of cameras fitted on the exhaust gas recirculation rail. This validation process shows that the predictions made by the model are in good agreement with the results obtained from the experimental tests., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-17) de la Universitat Politecnica de Valencia'' and "Laurent Odillard'' from "Valeo Systemes Thermiques.''
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efecto del cambio climático en la calidad del agua de la Cuenca del Júcar, Climate change effect on water quality in the Júcar River Basin

  • Suárez-Almiñana, S.
  • Paredes Arquiola, Javier|||0000-0003-3198-2169
  • Andreu Álvarez, Joaquín|||0000-0001-5087-5014
  • Solera Solera, Abel|||0000-0001-7464-3963
[EN] This study analyses the effect of climate change on water quality in the Júcar River Basin from future estimations of hydrological inputs and water temperature (WT). For this purpose, a large-scale water quality model was used to estimate the ecological status of all the water bodies, based on the concentrations of BDO5, P, NH4+ and NO3– for the future horizons 2020, 2050 and 2080. In this study, a greater number of water bodies with higher pollution levels (80-100% failures) were obtained in the horizons 2050 and 2080, which are located in the middle and lower parts of the basin. In addition, the degradation of BDO5 and the NH4+ is highly dependent on WT, highlighting the importance of considering this variable in the model., [ES] En este estudio se analiza el efecto del cambio climático en la calidad del agua de la cuenca del Júcar a partir de estimaciones futuras de aportaciones hidrológicas y temperatura del agua (Ta). Para ello, se utilizó un modelo de calidad de aguas a escala de cuenca con el que se estimó el estado ecológico de todas las masas de agua, basándose en las concentraciones de DBO5, P, NH4+ y NO3- para los horizontes futuros 2020, 2050 y 2080. De este análisis se obtuvo un incremento del número de masas con altos niveles de contaminación (80-100% incumplimientos) en los horizontes 2050 y 2080, localizadas sobre todo en la parte media y baja de la cuenca. Además, la degradación de la DBO5 y el NH4+ es muy dependiente de la temperatura del agua, poniendo de manifiesto la importancia de considerar esta variable en el modelo., Los autores agradecen al Ministerio de Ciencia e Innovación (MICINN) por financiar el proyecto RESPHIRA (PID2019106322RB-100) y a la Agencia Estatal de Investigación (MINECO) por financiar el proyecto ERAS (CTM2016-77804P), cofinanciado con Fondos FEDER. Además, también valoramos el apoyo de la Comunidad Europea en la financiación de los proyectos IMPREX (H2020-WATER-2014–2015, 641811) y SWICCA (ECMRWF-Copernicus-FA 2015/ C3S_441-LOT1/SMHI). Por último, agradecer al Programa de Apoyo para la Investigación y Desarrollo (PAID-01-17) de la Universitat Politècnica de València por fomentar y facilitar los contratos de formación de personal investigador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Digitizing an Excavation: A Laser Scanning Database of Maya Architectural Remains

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
  • Muñoz Cosme, Gaspar|||0000-0002-2285-3173
[EN] Excavating an ancient Maya city requires a long-term archaeological project that entails adequate documentation procedures for the unearthed remains, frequently of monumental scale and with difficult preservation conditions. A digital laser scanner survey methodology was designed and implemented to document the exposed architecture and to follow-up the archaeological excavation of the Maya site of La Blanca (Peten, Guatemala). All scans collected during the different field seasons were stored and aligned in a common reference system. Thus, an accurate digital three-dimensional database was obtained, including all the architectural remains found, some of which had to be reburied to ensure their preservation. The resulting database is a helpful repository that facilitates to extract all the graphic outputs required for: planning the next excavation campaigns, monitoring the preservation of the buildings, studying the architecture and construction technology in detail, and disseminating the excavation results. This paper describes the methodology and procedures used to build-up this database., The work for this article has been carried out in the project Arquitectura maya. Sistemas constructivos, estética formal, simbolismo y nuevas tecnologías (PGC2018-098904-B-C21) which is funded from the Spanish Ministry of Science, Innovation and Universities. It was also supported by Universitat Politècnica de València under the Research and Development Grants Program (PAID-01-17); Generalitat Valenciana and European Social Fund (APOSTD/2020/004) and the Santiago Grisolía grants program (GRISOLIAP/2018/139). The authors acknowledge La Blanca Project (https://www.uv.es/arsmaya/proyecto.html), funded by the Spanish Ministry of Culture through the Programa de excavaciones arqueológicas en el exterior, and greatly appreciate the suggestions for improvement by the reviewers who dedicated their valuable time and efforts in reviewing this manuscript.