Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells

  • González Domínguez, José Miguel
  • Grasa, Laura
  • Frontiñán-Rubio, Javier
  • Abás, Elisa
  • Domínguez Alfaro, Antonio
  • Mesonero, José Emilio
  • Criado, A.
  • Ansón-Casaos, Alejandro
13 figures, 2 tables.-- Supplementary information available., Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2). The functionalized SWCNT/II-NCC hybrids show a higher activity than the reference (capecitabine) against the Caco-2 cancer cell line. However, this effect appears to be intrinsically associated with the SWCNT/II-NCC complex, particularly boosted by fluorescein, as the presence of capecitabine is not required. In addition, confocal microscopy fluorescence imaging using cell cultures highlights the enormous potential of this nanohybrid platform for colon cancer theranostics., This research was funded by the regional government of Aragón, DGA (Grupos Reconocidos DGA-T03_17R, DGA-T03_20R and DGA-A20_20R), together with associated EU Regional Development Funds, and also the Spanish MINEICO through a “Juan de la Cierva Incorporación” contract, and their associated research funds (ref. IJCI-2016–27789). A.C. thanks the Xunta de Galicia for an “Atracción de Talento” research grant (no. ED431H 2020/17)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, A.
  • Sanahuja, O.
  • Villacampa, B.
  • Diez, J.L.
  • Benito, Ana M.
  • Maser, W.K.
  • Muñoz, E.
  • Ansón Casaos, A.
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

  • Puértolas, J.A.
  • Castro, M.
  • Morris, J.A.
  • Ríos, R.
  • Ansón-Casaos, A.
Poly(ether ether ketone) (PEEK) is a relevant thermoplastic in industry and in the biomedical sector. In this work, the lubricant capability of graphene nanoplatelets (GNPs) is used for improving the PEEK wear properties. Nanocomposites were prepared by solvent-free melt-blending and injection molding at various compositions between 1 and 10 wt. % of GNPs. The Raman G band shows a progressive increment proportional to the bulk GNP percentage. From calorimetric data, the polymer matrix structure is interpreted in terms of a 3-phase model, in which the crystalline phase fluctuates from 39 to 34% upon GNP addition. Thermal conductivity varies in accordance with the polymer crystallinity. Tensile and flexural tests show a progressive increase in the modulus, as well as a decrease in the fracture strength and the work of fracture. Most important, the composite surface undergoes a substantial improvement in hardness (60%), together with a decrease in the coefficient of friction (-38%) and a great reduction in the wear factor (-83%). Abrasion and fatigue wear mechanisms are predominant at the lowest and highest GNP concentrations respectively. In conclusion, GNPs are used without any chemical functionalization as the filler in PEEK-based materials, improving the surface hardness and the tribological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photoactivity improvement of TiO2 electrodes by thin hole transport layers of reduced graphene oxide

  • Hernández-Ferrer, J.
  • Ansón-Casaos, A.
  • Víctor-Román, S.
  • Sanahuja-Parejo, O.
  • Martínez, M.T.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Nanostructured TiO2 and graphene-based materials constitute components of actual interest in devices related to solar energy conversion and storage. In this work, we show that a thin layer of electrochemically reduced graphene oxide (ECrGO), covering nanostructured TiO2 photoelectrodes, can significantly improve the photoactivity. In order to understand the working principle, ECrGO/TiO2 photoelectrodes with different ECrGO thicknesses were prepared and studied by a set of photoelectrochemical measurements. Methanol in alkaline conditions was employed as effective hole acceptor probe to elucidate the electronic phenomena in the electrode layers and interfaces. These studies underline the hole accepting properties of ECrGO and reveal the formation of a p-n junction at the interface between ECrGO and TiO2. It is shown for the first time that the resulting space charge region of about 10 nm defines the operational functionality of the ECrGO layer. Films thinner than the space charge region act as hole transport layer (HTL), which efficiently transfers holes to the liquid interface thus leading to enhanced photoactivity. Thicker films however act as hole blocking layer (HBL), resulting in a systematic decrease of the photoactivity. The finding of a thickness dependent threshold value for the operation of ECrGO as HTL and HBL is of general interest for the fabrication of optoelectronic devices with improved performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interfacing Transition Metal Dichalcogenides with Carbon Nanodots for Managing Photoinduced Energy and Charge-Transfer Processes

  • Vallan, L.
  • Canton-Vitoria, R.
  • Gobeze, H.B.
  • Jang, Y.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • D''Souza, F.
  • Tagmatarchis, N.
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1, 2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal, and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation, charge transfer from an exciton dissociation path of MoS2 to CNDs, within CND-MoS2, was observed. However, such a process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes. development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-Deposited Carbon Aerogel Derived from Graphene Oxide Enables NO2-Selective Parts-per-Billion Sensing

  • Nufer, S.
  • Lynch, P.J.
  • Large, M.J.
  • Ogilvie, S.P.
  • Salvage, J.P.
  • Pelaez-Fernandez, M.
  • Waters, T.
  • Jurewicz, I.
  • Muñoz, E.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • Tagmatarchis, N.
  • Ewels, C.P.
  • Brunton, A.
  • Dalton, A.B.
Laser-deposited carbon aerogel is a low-density porous network of carbon clusters synthesized using a laser process. A one-step synthesis, involving deposition and annealing, results in the formation of a thin porous conductive film which can be applied as a chemiresistor. This material is sensitive to NO2 compared to ammonia and other volatile organic compounds and is able to detect ultra-low concentrations down to at least 10 parts-per-billion. The sensing mechanism, based on the solubility of NO2 in the water layer adsorbed on the aerogel, increases the usability of the sensor in practically relevant ambient environments. A heating step, achieved in tandem with a microheater, allows the recovery to the baseline, making it operable in real world environments. This, in combination with its low cost and scalable production, makes it promising for Internet-of-Things air quality monitoring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells

  • González-Domínguez, J. M.
  • Grasa, L.
  • Frontiñán-Rubio, J.
  • Abás, E.
  • Domínguez-Alfaro, A.
  • Mesonero, J. E.
  • Criado, A.
  • Ansón-Casaos, A.
Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2). The functionalized SWCNT/II-NCC hybrids show a higher activity than the reference (capecitabine) against the Caco-2 cancer cell line. However, this effect appears to be intrinsically associated with the SWCNT/II-NCC complex, particularly boosted by fluorescein, as the presence of capecitabine is not required. In addition, confocal microscopy fluorescence imaging using cell cultures highlights the enormous potential of this nanohybrid platform for colon cancer theranostics. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unique properties and behavior of nonmercerized type-ii cellulose nanocrystals as carbon nanotube biocompatible dispersants

  • Gonzalez-Dominguez, José Miguel
  • Anson-Casaos, Alejandro
  • Grasa, Laura
  • Abenia, Luis
  • Salvador, Alba
  • Colom, Eduardo
  • Mesonero, José E.
  • Garcia-Bordeje, J.Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process. Here, we provide an optimal scenario to obtain either type-I or II nanocrystalline cellulose (NCC) by a mercerization-free method consisting only of the acid hydrolysis commonly used to produce nanocellulose from microcellulose. The possibility of having nonmercerized type-II NCC acquires a great relevance since this nanostructure shows particularly appealing properties. Moreover, an entangled and wrapped system arises when used as a dispersing agent for single-walled carbon nanotubes (SWCNTs), significantly different from that of type I. The biological testing of each NCC type and their respective SWCNT-NCC dispersions in human intestinal (Caco-2) cells reveals a general innocuous behavior in both cancer and normal stages of differentiation; however, the type-II-based SWCNT-NCC dispersions display cytotoxicity for cancer cells while enhancing mitochondrial metabolism of normal cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modification of Physicochemical Properties and Boosting Electrical Conductivity of Reduced Graphene Oxide Aerogels by Postsynthesis Treatment

  • Carrera, C
  • Gonzalez-Dominguez, JM
  • Pascual, FJ
  • Anson-Casaos, A
  • Benito, AM
  • Maser, WK
  • Garcia-Bordeje, E
Electrically conductive graphene aerogels are attracting great interest as functional materials. Nevertheless, graphene aerogels synthesized from graphene oxide usually exhibit low electrical conductivity. In order to increase conductivity, herein a postsynthesis thermal treatment at several temperatures (from 300 to 1000 degrees C) has been applied to pristine reduced graphene oxide aerogels under two different atmospheres, namely, inert Ar flow and isopropanol+H-2 flow. Upon thermal treatment under Ar flow, the electrical conductivity of aerogel upscales with the treatment temperature. More remarkably, the electrical conductivity becomes 1 order of magnitude larger when the thermal treatment is carried out under isopropanol+H-2 instead of under Ar, while maintaining a very low density and porous structure. The electrical conductivity achieved is exceptionally high for such a lightweight and porous material. The exhaustive characterization allowed disclosing that the generation of carbon links between the reduced graphene oxide nanosheets is the reason for this enhancement. The electrically conductive aerogels have excellent prospects for application as scaffolds for energy storage or biomedical applications.