Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

In-field torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Loayssa Lara, Alayn
  • López-Amo Sáinz, Manuel
  • Jiménez, S.
  • Achaerandio, Álvaro
In-field torsion measurements on solar trackers using fiber Bragg gratings are presented. 45 FBG sensors have been deployed in an operational solar energy plant to study the mechanical response of the structure to wind., This work was supported by the Gobierno de Navarra project WINDSOLAR (0011-1365-2017-000122), the Spanish AEI project TEC2016-76021-C2, FEDER Funds, ISC talent grant, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Interferometric vs wavelength selective optical fiber sensors for cryogenic temperature measurements

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López Aldaba, Aitor
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this work, a preliminary study of the behavior of two different interferometric fiber optic sensors and two different wavelength selective fiber optic sensors is performed. A photonic cristal fiber Fabry-Pérot interferometer, a Sagnac interferometer, a commercial fiber Bragg grating (FBG) and a π-phase shifted fiber Bragg grating interrogated in a random distributed feedback fiber laser are analyzed. A comparison of their sensitivities and resolutions is carried out to analyze their performance as sensors for cryogenic temperatures, taking into account their advantages and drawbacks., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R and the FEDER funds are acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Medida de torsión en seguidores solares con sensores de fibra óptica, Torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • Loayssa Lara, Alayn
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Jiménez Romero, Sergio
  • Moriana García, Iñaki
En este trabajo se ha monitorizado la torsión sufrida por una estructura de seguidores solares empleando sensores de fibra óptica. Estas medidas de campo se han obtenido con una red de sensores formada por 45 redes de difracción de Bragg en una huerta solar activa. Estos resultados, correlados con la velocidad y dirección del viento permitirían aumentar la eficiencia de los seguidores y ayudar a entender y prevenir efectos negativos relacionados con inestabilidades aeroelásticas., In this work, the torsion experienced by set of solar trackers is monitored using fiber optic sensors. The in-field measurements were obtained using a sensor network comprising 45 fiber Bragg gratings in an active solar plant. These results, correlated with wind speed and direction could increase efficiency and lead to understand and prevent harmful effects related to aeroelastic instability events., Este trabajo ha sido financiado por el proyecto WINDSOLAR (0011-1365-2017-000122) del Gobierno de Navarra, los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Microstructured optical fiber sensor for soil moisture measurements

  • López Aldaba, Aitor
  • López Torres, Diego
  • Campo-Bescós, Miguel
  • López Rodríguez, José Javier
  • Yerro Lizarazu, David
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2019, A discrete sensor based on a Sn0₂-FP (Fabry-Pérot) cavity is presented and characterized in real soil conditions. Results are compared, for the first time to our knowledge, with a commercial capacitive sensor and gravimetric measurements., The Spanish Government projects TEC 2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds are acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

WDM and TDM interrogation by sequentially pulsing direct modulated DFBs

  • Pérez González, Asier
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
A new versatile and cost-effective interrogation system by pulsing direct modulated (DM) DFB laser diodes is proposed. 1 pm wavelength resolution and 600 m sensor spacing is demonstrated by sequentially pulsing a DM DFB., This work was supported by the Spanish AEI project TEC2016-76021-C2-01, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 and the institute of Smart Cities (UPNA) talent grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Structural health monitoring of solar trackers using distributed fiber optic sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Mompó Roselló, Juan José
  • Zurita Gabasa, Jesús
  • Urricelqui Polvorinos, Javier
  • Júdez Colorado, Aitor
  • López-Amo Sáinz, Manuel
  • Jiménez Romero, Sergio
  • Achaerandio, Álvaro
  • Loayssa Lara, Alayn
We demonstrate the application of a novel type of distributed fiber optic sensors (DFOSs) to dynamically monitor the effects of wind on solar tracker structures used in photovoltaic power stations. This DFOS is based on the stimulated Brillouin scattering nonlinear optical effect in optical fiber, which can be used to measure the distribution of strain and temperature along a given structure. However, contrary to existing solutions, the sensor provides dynamic real-time measurements with hundreds or even thousands of full simultaneous measurements for all positions in the fiber each second. Moreover, high-precision and high spatial resolution are obtained. This so-called dynamic Brillouin optical time-domain analysis (D-BOTDA) sensor provides real-time monitoring of the bending and torsion of the structure of solar trackers in response to wind load. This helps the solar tracker manufacturer asses and improve the mechanical designs so as to introduce corrective measures and develop cost-effective components that properly withstand the effects of wind at any given location. We experimentally demonstrate the application of a D-BOTDA sensing system to measure distributed bending and, for the first time to our knowledge, also distributed torsion along the stressed beam of the solar tracker. For this purpose, we have developed a procedure to instrument the torsion beam with two optical sensing fibers that are fixed helically wound along the beam in opposite directions, so that any common-mode thermal or bending effects are removed. We initially performed tests in a laboratory facility in which sections of the torsion beam could be subjected to controlled moments. Static and dynamic loads were applied and the measured deformations were compared to those obtained with fiber Bragg gratings, which just provide point measurements of strain. In both cases, full agreement was demonstrated. Finally, the system was installed in an operational solar park., The authors wish to acknowledge the financial support of the Spanish Agencia Estatal de Investigación through projects TEC2016-76021-C2-1-R and RTC-2017-6239-3, FEDER funds, Gobierno de Navarra project 0011-1365-2017-000122, the Universidad Pública de Navarra, the Smart Cities Institute and Uptech-Sensing S.L.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Multiplexing optical fiber Fabry-Perot interferometers based on air-microcavities

  • Pérez Herrera, Rosa Ana
  • Novais, Susana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Silva, Susana
  • Frazão, Orlando
  • López-Amo Sáinz, Manuel
In this work we demonstrate the multiplexing capability of new optical fiber Fabry-Perot interferometers based on airmicrocavities using a commercial FBG interrogator. Three optimized air-microcavity interferometer sensors have been multiplexed in a single network and have been monitored using the commercial FBGs interrogator in combination with FFT calculations. Results show a sensitivity of 2.18 π rad/mε and a crosstalk-free operation., This work was supported by the Spanish AEI TEC2016-76021-C2, FEDER Funds; and also by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalization - COMPETE 2020 Programme and by National Funds through the Portuguese funding agency, FCT - Fundação para a Ciência e a Tecnologia within project ENDOR - Endoscope based on New Optical Fibre Technology for Raman Spectroscopy (POCI-01-0145-FEDER-029724). M. Bravo received funding from Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Detrimental effects in Brillouin distributed sensors caused by EDFA transient

  • Feng, Cheng
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We investigate the deleterious effect and the error in Brillouin optical time-domain analyzers induced by the combination of a low extinction ratio pulse generation with the transient behavior of erbium-doped fiber amplifiers., The authors wish to acknowledge the financial support of the German Research Foundation (DFG SCHN 716/13-1), Spanish Ministerio de Economía y Competitividad (TEC2016-76021-C2-1-R, TEC2013-47264-C2-2-R) and FEDER.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Traffic monitoring based on FBG sensor arrays in asphalt structures

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Bravo Acha, A.
  • Bravo Navas, M.
  • Mitxelena, J. R.
  • Martínez Mazo, J. J.
  • Camarero, E.
  • López-Amo Sáinz, Manuel
We evaluate the capabilities of optical fiber sensors to measure traffic flow, speed, weight estimation and pavement degradation. The proper operation of the system has been proved 3.5 years after the installation in a metropolitan road., This work was supported by the Spanish AEI project TEC2016-76021-C2, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 and the institute of Smart Cities (UPNA) talent grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Distributed humidity sensor for moisture-front monitoring in soils

  • Leandro González, Daniel
  • Delgado Zabala, Oihane
  • López Rodríguez, José Javier
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this contribution, high spatial resolution distributed humidity sensing was demonstrated for moisture-front monitoring in soils by using polyimide coated optical fiber., This work was supported by the Spanish AEI project TEC2016-76021-C2, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Relative humidity multi-point optical sensors system based on Fast Fourier multiplexing technique

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • Arregui San Martín, Francisco Javier
  • López-Amo Sáinz, Manuel
In this paper, a new multipoint optical fiber system for relative humidity measurements based on Sn02-FP (Fabry-Pérot) sensing heads and an optical interrogator as single active device is presented and characterized. The interrogation of the sensing heads is carried out by monitoring the Fast Fourier Transform phase variations of the FP (Fabry-Pérot) interference frequencies. This method allows to multiplex several sensors with different wavelength spacing interference pattern. The sensors operate within a wide humidity range (20%-90% relative humidity) with low crosstalk between them. Five sensing heads have been measured using two different channels of the optical interrogator. The availability of four channels in the interrogator allows to multiplex a higher number of sensors, reducing proportionally the cost of each sensing point., The authors thank the Spanish Government projects TEC 2013-47264-C2-2-R, TEC2016-76021-C2-1-R, TEC2013- 43679-R Innocampus and the INTERREG SUDOE Project SOE3/P2/P714 as well as to the FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Micro-drilled optical fiber for enhanced laser strain sensors

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Roldán Varona, Pablo
  • Leandro González, Daniel
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
In this work, we present an experimental measurement of temperature and strain sensitivities of a micro-drilled optical fiber (MDOF). The MDOF consisted of a quasi-randomly distributed reflector along a single mode fiber (SMF). A fiber cavity laser based on MDOF was experimentally studied, attaining a single-wavelength laser emission centered at 1568.6nm. The output power level obtained from this single-laser oscillation when pumped at 140mW was around - 9.6dBm, and an optical signal to noise ratio (OSNR) of around 45dB was measured. Although temperature sensitivities of fiber Bragg gratings used as sensors are similar to our MDOF, strain sensitivity is enhanced around one order of magnitude when the MDOF was used., This work was supported by the Spanish AEI TEC2016-76021-C2, FEDER Funds, and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Compact optical fiber lasers and optical fiber sensors assisted by femtosecond laser inscription of plane-by-plane FBGs

  • Roldán Varona, Pablo
  • Pallarés Aldeiturriaga, D.
  • Rodríguez Cobo, Luis
  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
Development of a high temperature sensor based on optical fiber l aser generated from a cavity of reduced dimensions (43 mm) in Er-doped fiber. The mirror FBGs have been inscribed with femtosecond laser using the slit beam technique (Pl-b-Pl)., This work has been supported by the project TEC2016-76021-C2-2-R (AEI/FEDER) of the Spanish government and FEDER funds, and by the grant FPU2018/02797 from the Spanish government.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

High sensitivity fiber-optic liquid level sensor using biconical tapered fibers

  • Júdez Colorado, Aitor
  • Leandro González, Daniel
  • Pérez Herrera, Rosa Ana
  • Galarza Galarza, Marko
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2018, A liquid level sensor is presented using a biconical tapered standard single-mode fiber, being its main characteristic an outstanding sensitivity for a low cost transducer. Temperature compensation is enabled with the same interrogation equipment., This work was supported in part by the Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2016-76021-C2-1-R, by the FEDER funds of EU, by the Agencia Estatal de Investigación within the project UNPN15-EE-3167 and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Random fiber lasers: application to fiber optic sensors networks

  • López-Amo Sáinz, Manuel
  • Leandro González, Daniel
  • Miguel Soto, Verónica de
  • Bravo Acha, Mikel
  • Fernández Vallejo, Montserrat
  • Pérez Herrera, Rosa Ana
Recently, random mirrors have been proposed as a method to create fiber laser cavities. This kind of cavity is based on cooperative Rayleigh scattering, which is generated along a fiber due to the material inhomogeneities presented in that fiber. In this work, basics of Random fiber lasers and different demonstrated lasing sensors systems for interrogating arrays of optical fiber sensors are shown. These systems use different kinds of amplification and cavities schemes and can interrogate optical fiber sensors located up to 225 km away., The authors would like to thank the financial support from Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2-R, Campus Iberus and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Title enhancement of the sensitivity of a volatile organic compounds MOF-sensor by means of its structure

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
Trabajo presentado en la Eurosensors 2017 Conference. París, 3–6 de septiembre de 2017., In this paper, we experimentally compare several core structures of Microstructured Optical Fibers (MOFs) for low-finesse Fabry-Pérot (FP) sensors. These sensors are designed for Volatile Organic Compounds (VOCs) measurements. We deposit Indium Tin Oxide (ITO) thin films by sputtering on the MOFs and different optical phase responses of the FP were measured for saturated atmospheres of ethanol. The sensitivity of the developed sensors is demonstrated to depend on the geometry and the dimensions of the MOF-cores. The sensors show recovery times under 100 s and the baselines are fully recovered after exposure to VOC., This work was supported by the research grant TEC2016-79367-C2-2-R and TEC 2016-76021-C2-1-R (AEI/FEDER, UE) as well as Public University of Navarre program PhD grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Sistema de interrogación multi-sensor basado en multiplexación en longitud de onda y tiempo, Multi-sensor interrogation system based on wavelength and time multiplexing

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez González, Asier
  • López-Amo Sáinz, Manuel
En este trabajo se propone un sistema de interrogación versátil y económico basada en la generación de pulsos empleando la modulación directa de diodos láser DFB. Se ha demostrado una resolución en longitud de onda de 1 pm para una separación de sensores de 600m. La validación del interrogador se ha llevado a cabo monitorizando una red de sensores de 26 km de longitud que incluye redes de difracción de Bragg, reflectores y un interferómetro Fabry-Pérot., This work proposes a versatile and cost-effective interrogation system based on pulses generation using direct modulated DFB laser diodes. A wavelength resolution of 1 pm is demonstrated for a 600 m sensor-spacing. A 26 km-long sensor network including fiber Bragg gratings, wideband reflectors and a Fabry-Pérot interferometer is used to validate the interrogator., Este trabajo ha sido financiado por los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143, el contrato Beatriz Galindo BEAGAL18/00116 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Linearly-configured BOCDA system with large modulation amplitude using dual-probe wave

  • Mariñelarena Ollacarizqueta, Jon
  • Kim, Yong Hyun
  • Loayssa Lara, Alayn
  • Song, Kwang Yong
We present and experimentally demonstrated a linearly-configured Brillouin optical correlation domain analysis (LC-BOCDA) system that allows large modulation amplitude (Δf) based on a dual probe wave and the control of correlation-order. The adoption of dual probe and the control of correlation-order can suppress the effects of two main origins of the noise - the Brillouin loss of the pump and the beat noise between the pump and probe waves. We experimentally confirm that Δf and the number of resolving points, N, can be increase to 1.8 times without significant noise., The authors wish to acknowledge the support from the Spanish Ministerio de Economía y Competitividad through the project TEC2016-76021-C2-1-R, FEDER funds and Universidad Publica de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Optical power-based interrogation of plasmonic tilted fiber Bragg grating biosensors

  • González Vila, Á.
  • López Aldaba, Aitor
  • Kinet, D.
  • Mégret, P.
  • López-Amo Sáinz, Manuel
  • Caucheteur, C.
Two interrogation techniques for plasmonic tilted fiber Bragg grating sensors are reported and experimentally tested. Typical interrogation methods are usually based on tracking the wavelength shift of the most sensitive cladding mode, but for biosensing applications, spectrometer-based methods can be replaced by more efficient solutions. The proposed techniques thus rely on the measurement of the induced changes in optical power. The first one consists of a properly polarized tunable laser source set to emit at the wavelength of the sensor most sensitive mode and an optical power meter to measure the transmitted response. For the second method, a uniform fiber Bragg grating is photo-inscribed beyond the sensor in such a way that its central wavelength matches the sensor most sensitive mode, acting as an optical filter. Using a LED source, light reflected backwards by this grating is partially attenuated when passing through the sensor due to plasmon wave excitation and the power changes are quantified once again with an optical power meter. A performance analysis of the techniques is carried out and they both result competitive interrogation solutions. The work thus focuses on the development of cost-effective alternatives for monitoring this kind of biosensors in practical situations., Á. González-Vila is supported by the F.R.S.-FNRS through a FRIA grant. C. Caucheteur is supported by the F.R.S.- FNRS. The authors would also like to thank the financial support from the ERC (European Research Council) Starting Independent Grant PROSPER (grant agreement No. 280161 – http://www.umons.ac.be/erc-prosper), from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2- R and from SUDOE ECOAL-MGT and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Ultra-long (275 km) random distributed feedback fiber laser for remote sensor monitoring

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2018, An interferometric sensor located 275 km away from the monitoring station has been interrogated by a double-pumped random distributed feedback fiber laser, reaching the longest distance in fiber optic remote sensing reported up to date., This work was supported in part by the Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2016-76021-C2-1-R and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Latest research on long-range Brillouin distributed sensing

  • Loayssa Lara, Alayn
  • Urricelqui Polvorinos, Javier
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Mompó Roselló, Juan José
We review the latest developments in long-range Brillouin optical time-domain analysis sensors. The factors that impair the performance of these sensors, particularly in terms of their distance range, are discussed together with the latest methods to overcome them. We focus on our recent contributions based on the application of the probe dithering method, which is based on introducing a wavelength modulation to the probe wave. This technique is shown to effectively compensate nonlocal effects originated in the depletion of the pump pulse as well as of its pedestal. In addition, it can provide amplification to the pump wave with a slight modification of the setup. Furthermore, this method can be combined with pump pulse coding and a new technique for coding linearization that we have devised to further extend the sensing length into the hundreds of kilometers range., The authors wish to acknowledge the financial support of the Spanish Agencia Estatal de Investigacin through projects TEC2016- 76021-C2-1-R and RTC-2017-6239-3, FEDER funds, Gobierno de Navarra project 0011-1365- 2017-000122 and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Enhancement of signal-to-noise ratio in Brillouin optical time domain analyzers by dual-probe detection

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We demonstrate a simple technique to enhance the signal-to-noise ratio (SNR) in Brillouin optical time-domain analysis sensors by the addition of gain and loss processes. The technique is based on the shift of the pump pulse optical frequency in a double-sideband probe system, so that the gain and loss processes take place at different frequencies. In this manner, the loss and the gain do not cancel each other out, and it makes possible to take advantage of both informations at the same time, obtaining an improvement of 3 dB on the SNR. Furthermore, the technique does not need an optical filtering, so that larger improvement on SNR and a simplification of the setup are obtained. The method is experimentally demonstrated in a 101 km fiber spool, obtaining a measurement uncertainty of 2.6 MHz (2σ) at the worst-contrast position for 2 m spatial resolution. This leads, to the best of our knowledge, to the highest figure-of-merit in a BOTDA without using coding or raman amplification., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Polyaniline deposition on tilted fiber Bragg grating for pH sensing

  • López Aldaba, Aitor
  • González Vila, Á.
  • Debliquy, M.
  • López-Amo Sáinz, Manuel
  • Caucheteur, C.
  • Lahem, D.
In this paper, we present the results of a new pH sensor based on a polyaniline (PAni) coating on the surface of a tilted fiber Bragg grating. The pH-sensitive PAni was deposited by in situ chemical oxidative polymerization. The performance of the fabricated pH sensor was tested and the obtained pH values were compared with the results obtained using a pH meter device. It was found that the sensor exhibits response to pH changes in the range of 2-12, achieving a sensitivity of 46 pm/pH with a maximum error due to the hysteresis effect of ±1.14 pH. The main advantages of this PAni-TFBG pH sensor are biochemical compatibility, temperature independence, long-term stability and remote real-time multipoint sensing features. This type of sensor could be used for biochemical applications, pipeline corrosion monitoring or remote-multipoint measurements., Á. González-Vila is supported by the F.R.S.-FNRS through a FRIA grant. C. Caucheteur is supported by the F.R.S.- FNRS. The authors would also like to thank the financial support from the ERC (European Research Council) Starting Independent Grant PROSPER (grant agreement No. 280161 – http://www.umons.ac.be/erc-prosper), from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2- R and from SUDOE ECOAL-MGT and FEDER funds from the European Union. The authors also acknowledge the financial support of CAPTINDOOR WBGREEN programs (Walloon Region of Belgium).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Gamma radiation measurements using an optical fiber laser

  • Pérez Herrera, Rosa Ana
  • Stancalie, Andrei
  • Cabezudo Sánchez-Valverde, Pablo Miguel
  • Sporea, Dan
  • Negut, Daniel
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2020, A fiber ring laser cavity configuration was used to analyze the effect of gamma-irradiation over the performance of different types of erbium doped fibers. Preliminary results validates this method to monitor gamma-radiation in real time., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within project TEC2016- 76021-C2-1-R and FEDER funds from the European Union are acknowledged. The reported investigations were performed in the frame of the COST Action MP 1401.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analyzer for extended sensing range using probe dithering and cyclic coding

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We present an enhanced performance Brillouin optical time-domain analysis sensor that uses dual probes waves with optical frequency modulation and cyclic coding. The frequency modulation serves to increase the probe power that can be injected in the fiber before the onset of non-local effects and noise generated by spontaneous Brillouin scattering. This leads to higher detected signal-to-noise ratio (SNR), which is further increased by the coding gain. The enhanced SNR translates to extended range for the sensor, with experiments demonstrating 1-m spatial resolution over a 164 km fiber loop with a 3-MHz Brillouin frequency shift measurement precision at the worst contrast position. In addition, we introduce a study of the power limits that can be injected in the fiber with cyclic coding before the appearance of distortions in the decoded signal., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the UPNA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Simultaneous and quasi-independent strain and temperature sensor based on microstructured optical fiber

  • López Aldaba, Aitor
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a new sensor system for simultaneous and quasi-independent strain and temperature measurements is presented. The interrogation of the sensing head has been carried out by monitoring the FFT phase variations of two of the microstructured optical fiber (MOF) cavity interference frequencies. This method is independent of the signal amplitude and also avoids the need to track the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The sensor is operated within a range of temperature of 30°C-75°C, and 380µɛ of maximum strain were applied; being the sensitivities achieved of 127.5pm/°C and -19.1pm/µɛ respectively. Because the system uses an optical interrogator as unique active element, the system presents a cost-effective feature., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021- C2-1-R, TEC2013-47264-C2-2-R and SUDOE ECOAL-MGT and FEDER funds from the European Union is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Simultaneous temperature and vibration monitoring using an all-PM fiber loop mirror interferometer

  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, an all-polarization maintaining fiber loop mirror interferometer is presented and validated as vibration and temperature sensor without crosstalk between measurands. The system is entirely built using polarization-maintaining (PM) fiber and a PM optical coupler. As a consequence, no polarization controllers are needed in the cavity, significantly simplifying the operation of the system and improving the stability and accuracy of the measurements. The loop comprises three PM fiber sections appropriately fused with an angle offset between them. In this manner, the interference is maximized and the sensing contributions of the two PM fibers used as communications channels are suppressed. The third PM fiber is used as the sensor itself, simultaneously monitoring temperature and mechanical vibration up to 1.2 kHz by means of an interrogation technique based on fast Fourier transform., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R.