Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Otros (Other)

Modelado de sistemas bioquímicos: De la Ley de Acción de Masas a la Aproximación Lineal del Ruido, Modelling biochemical systems: from Mass Action Kinetics to Linear Noise Approximation

  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó i Marco, Enric
[EN] In the last decade we have witnessed a growing application of engineering techniques to biology. Areas such as Systems Biology or, more recently, Synthetic Biology, get more and more attention from the engineers. Specifically, modeling in these fields makes possible the generation of new experimentally verifiable hypothesis, and new ways of biological intervention, as well as more or less mechanistic explanations of experimental results. A model-based approximation requires the consideration of the biochemical reactions dynamics and their regulation. The first part of this tutorial describes the deterministic modeling and model reduction techniques, as applied to the class of biochemical reactions specific to molecular cell biology.Noise plays a crucial role in the biological circuitry dynamics. In the field of automatic control there is a long tradition of modeling using linear stochastic differential equations, under the simplifying assumption that noise has a magnitude independent of the state. This assumption is not valid in biological circuits. The second part of the tutorial describes the most widely used methods for stochastic modeling in molecular cell biology, paying special attention to the so-called linear noise approximation. , [ES] Durante la ultima década hemos vivido una creciente aplicación de técnicas propias de las ingenierías a la biología. Áreas como la Biología de Sistemas o, más recientemente, la Biología Sintética, reciben una atención cada vez mayor por parte de los ingenieros. En particular, el modelado en estos ámbitos permite la generación de nuevas hipótesis contrastables experimentalmente, y de nuevas formas de intervención biológica, así como explicaciones más o menos mecanicistas de los resultados experimentales. Una aproximación basada en modelo requiere considerar la dinámica de las reacciones bioquímicas y su regulación. En la primera parte de este tutorial se introducen el modelado determinista y reducción de modelos de la clase de reacciones bioquímicas propias de la biología molecular celular.El ruido juega un papel crucial en la dinámica de los circuitos biológicos. En el área de control automático hay una larga tradición de modelado mediante ecuaciones diferenciales estocásticas lineales, bajo la hipótesis simplificadora de asumir que el ruido tiene una magnitud independiente de la del estado. Esta hipótesis no es válida en los circuitos biológicos. En la segunda parte del tutorial se describen los métodos de modelado estocástico más usados en biología molecular, con especial atención a denominada aproximación lineal del ruido., Este trabajo ha sido realizado parcialmente gracias al apoyo de los proyectos FEDER-CICYT DPI2011-28112-C04-01, y DPI2014-55276-C5-1. Yadira Boada agradece la beca FPI/2013- 3242 de la Universitat Politècnica de València.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Percepción y distancia acústica: la variación paramétrica individual en la escisión fonemática de /θ/ en el español andaluz. Datos de la ciudad de Málaga, Perception and acoustic distance: the individual parametric variation in phonemic split of /Θ/ in Andalusian Spanish. Data of the city of Malaga

  • Molina García, Álvaro
En este trabajo se propone un modelo cuantitativo para medir la distancia acústica de las realizaciones de /s/ y /θ/ en relación con las grafías <s> y <z, ce, ci>. Con carácter previo a la construcción de dicho modelo, se demuestra a partir de las realizaciones de doce informantes que este proceso de escisión puede considerarse como una excepción al principio de Garde —tal y como fue entendido por Labov (1994: 485)—; se caracterizan acústicamente los alófonos, y se representa un modelo gráfico basado en el concepto de coordenadas polares, con el fin de reflejar la variación paramétrica individual en la articulación de los alófonos escindidos de /θ/. Los resultados muestran que los informantes jóvenes instruidos establecen una distancia superior a la de los informantes no instruidos de mayor edad y que existe una notable variación en los parámetros acústicos subyacentes que cada hablante modifica individualmente.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Advances in Understanding High-Mass X-ray Binaries with INTEGRAL and Future Directions

  • Kretschmar, Peter
  • Fürst, Felix
  • Sidoli, Lara
  • Bozzo, Enrico
  • Alfonso-Garzón, Julia
  • Bodaghee, Arash
  • Chaty, Sylvain
  • Chernyakova, Masha
  • Ferrigno, Carlo
  • Manousakis, Antonios
  • Negueruela, Ignacio
  • Postnov, Konstantin
  • Paizis, Adamantia
  • Reig, Pablo
  • Rodes Roca, José Joaquín
  • Tsygankov, Sergey
  • Bird, Antony J.
  • Bissinger né Kühnel, Matthias
  • Blay, Pere
  • Caballero, Isabel
  • Coe, Malcolm J.
  • Domingo, Albert
  • Doroshenko, Victor
  • Ducci, Lorenzo
  • Falanga, Maurizio
  • Grebenev, Sergei A.
  • Grinberg, Victoria
  • Hemphill, Paul
  • Kreykenbohm, Ingo
  • Kreykenbohm né Fritz, Sonja
  • Li, Jian
  • Lutovinov, Alexander A.
  • Martínez Núñez, Silvia
  • Mas-Hesse, J. Miguel
  • Masetti, Nicola
  • McBride, Vanessa A.
  • Neronov, Andrii
  • Pottschmidt, Katja
  • Rodriguez, Jérôme
  • Romano, Patrizia
  • Rothschild, Richard E.
  • Santangelo, Andrea
  • Sguera, Vito
  • Staubert, Rüdiger
  • Tomsick, John A.
  • Torrejon, Jose M.
  • Torres, Diego F.
  • Walter, Roland
  • Wilms, Jörn
  • Wilson-Hodge, Colleen A.
  • Zhang, Shu
  • Negueruela, Ignacio|||/items/a3c73f50-550e-493d-9c4e-2075cf122de4
  • Rodes Roca, José Joaquín|||/items/9005a2de-e9e4-401b-8862-5235312280d9
  • Torrejon, Jose M.|||/items/b8a40e83-6016-4fd5-94f9-feefe05bc06a
High mass X-ray binaries are among the brightest X-ray sources in the Milky Way, as well as in nearby Galaxies. Thanks to their highly variable emissions and complex phenomenology, they have attracted the interest of the high energy astrophysical community since the dawn of X-ray Astronomy. In more recent years, they have challenged our comprehension of physical processes in many more energy bands, ranging from the infrared to very high energies. In this review, we provide a broad but concise summary of the physical processes dominating the emission from high mass X-ray binaries across virtually the whole electromagnetic spectrum. These comprise the interaction of stellar winds with the high gravitational and magnetic fields of compact objects, the behaviour of matter under extreme magnetic and gravity conditions, and the perturbation of the massive star evolutionary processes by presence in a binary system. We highlight the role of the INTEGRAL mission in the discovery of many of the most interesting objects in the high mass X-ray binary class and its contribution in reviving the interest for these sources over the past two decades. We show how the INTEGRAL discoveries have not only contributed to significantly increase the number of high mass X-ray binaries known, thus advancing our understanding of the population as a whole, but also have opened new windows of investigation that stimulated the multi-wavelength approach nowadays common in most astrophysical research fields. We conclude the review by providing an overview of future facilities being planned from the X-ray to the very high energy domain that will hopefully help us in finding an answer to the many questions left open after more than 18 years of INTEGRAL scientific observations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Study of Periodic Dielectric Frequency-selective Surfaces under 3D Plane Wave Incidence

  • Coves Soler, Ángela María
  • Marini, Stephan
  • Gimeno Martínez, Benito
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
A periodic Dielectric Frequency-Selective Surface (DFSS) is studied under 3D plane-wave incidence, whose unit cell in the periodic direction is composed of a dielectric grating and a homogeneous dielectric layer. The structure is excited by a linearly polarized plane-wave. The procedure for computing the Brillouin diagram of the structure under 2D plane-wave incidence with TE or TM polarization was already described by the authors, and the extension to the 3D incidence case has been performed in a similar way. Following the same formalism, it has been obtained the Generalized Scattering Matrix (GSM) of one period of the infinite periodic lattice. This requires the knowledge of the modal spectrum in both homogeneous and periodic dielectric media. To this end, a numerical technique based on a vectorial modal method originally proposed by the authors has been used. Once the S matrix of one period of the periodic medium is computed, the corresponding generalized ABCD matrix of the unit cell can be easily derived, which provides a standard multimodal eigenvalue matrix problem whose solution yields the transverse field distributions and the modal propagation constants in the periodic lattice. In the 3D incidence case, a given number of modes considered in the construction of the ABCD matrix yields the dispersion diagram of TE and TM modes simultaneously. The identification of the modes can be easily performed through the comparison of their dispersion diagram with the reflectance spectra of the structure under a given incidence polarization (TE or TM). Finally, some numerical result effects, varying the incidence direction of the exciting plane-wave in the dispersion diagram of an Electromagnetic Band Gap (EBG) material, are shown.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Through the Eyes of VERTa, A Través de los Ojos de VERTa

  • Comelles Pujadas, Elisabet
  • Atserias Batalla, Jordi
This paper describes a practical demo of VERTa for Spanish. VERTa is an MT evaluation metric that combines linguistic features at different levels. VERTa has been developed for English and Spanish but can be easily adapted to other languages. VERTa can be used to evaluate adequacy, fluency and ranking of sentences. In this paper, VERTa’s modules are described briefly, as well as its graphical interface which provides information on VERTa’s performance and possible MT errors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Un detector de la unidad central de un texto basado en técnicas de aprendizaje automático en textos científicos para el euskera, A Machine Learning based Central Unit Detector for Basque Scientific Texts

  • Bengoetxea Kortazar, Kepa
  • Atutxa Salazar, Aitziber
  • Iruskieta Quintian, Mikel
En este artículo presentamos el primer detector de la Unidad Central (UC) de resúmenes científicos en euskera basado en técnicas de aprendizaje automático. Después de segmentar el texto en unidades de discurso elementales, la detección de la unidad central es crucial para anotar de forma más fiable la estructura relacional de textos bajo la Teoría de la Estructura Retórica o Rhetorical Structure Theory (RST). Además, la unidad central puede ser explotada en diversas tareas como resumen automático, tareas de pregunta y respuesta o análisis del sentimiento. Los resultados obtenidos demuestran que las técnicas de aprendizaje automático superan a las técnicas basadas en reglas a pesar del pequeño tamaño del corpus y de la heterogeneidad de los dominios que éste muestra, dejando todavía lugar para mejoras y desarrollo.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

La expresión del tabú en el habla de Málaga, The expression of taboo in the speech of Málaga

  • Guerrero Ramos, Gloria
  • Pérez Lagos, Manuel Fernando
Las investigaciones sobre la interdicción y su expresión han llevado a que solo es posible un profundo acercamiento a este fenómeno mediante un análisis simultáneo desde diferentes ámbitos lingüísticos y extralingüísticos. En esta línea nuestro trabajo considera la expresión de las realidades y conceptos interdictos en el discurso oral de los hablantes malagueños. Atendemos a determinadas variables pragmático-discursivas (expresión, finalidad, función) así como a las características sociolingüísticas (sexo, edad, instrucción) de estos hablantes para conocer cuál es su actuación ante los conceptos tabuizados. Consideramos así el uso y frecuencias de expresiones referidas a realidades interdictas en el habla de Málaga, los recursos que aparecen en estas expresiones lingüísticas, su función discursiva y finalidad y, además, mostramos la variabilidad del fenómeno atendiendo a tres tradicionales variables sociolingüísticas: edad, sexo, estudios del hablante malagueño. Comparamos también los resultados de nuestro estudio con los obtenidos por los grupos PRESEEA de Madrid y Granada.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Detecting the Central Units of Brazilian Portuguese argumentative answer texts, Detección de las unidades centrales para textos de respuesta argumentativa en Portugués-Brasileño

  • Bengoetxea Kortazar, Kepa
  • Iruskieta Quintian, Mikel
  • Antonio, Juliano Desiderato
Understanding or writing properly the main idea or the Central Unit (CU) of a text is a very important task in exams. So, detecting automatically the CU may be of interest in language evaluation tasks. This paper presents a CU detector based on machine learning techniques for argumentative answer texts in Brazilian Portuguese. Results show that the detection of CUs following machine learning techniques in argumentative answer texts is better that those using rules.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design and Multiphysics Analysis of Direct and Cross-Coupled SIW Combline Filters Using Electric and Magnetic Couplings

  • Sirci, Stefano
  • Sánchez-Soriano, Miguel Ángel
  • Martínez, Jorge D.
  • Boria Esbert, Vicente Enrique
  • Gentili, Fabrizio
  • Bösch, Wolfgang
  • Sorrentino, Roberto
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
In this paper, combline substrate integrated waveguide (SIW) filters using electric and magnetic couplings are thoroughly studied. Thus, a negative coupling scheme consisting on an open-ended coplanar probe is proposed and analyzed in detail. Several in-line 3-pole filters at C-band are designed, manufactured and measured showing how the presented approach can be used for implementing direct couplings while enabling an important size reduction and improved spurious-free band compared to conventional magnetic irises. A fully-packaged quasi-elliptic 4-pole filter is also designed at 5.75 GHz showing how the negative coupling structure can be used for introducing transmission zeros by means of cross-couplings between non-adjacent resonators. Finally, average and peak power handling capabilities of these filters have been also analyzed from a multiphysics point of view. Measured results validate the theoretical predictions confirming that combline SIW filters can handle significant levels of continuous and peak power, providing at the same time easy integration, compact size and advanced filtering responses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Factores lingüísticos y sociales en el proceso de debilitamiento de /-n/ final de palabra y el uso de formas vulgares en la ciudad de Málaga, Linguistic and social factors of the /n/ segment in final position’s weakening process and the use of vulgarisms in the city of Malaga

  • Martín Morales, Miriam
El objetivo de este trabajo es ofrecer los resultados de un estudio de carácter exploratorio realizados sobre materiales del corpus PRESEEA-Málaga. Por un lado, se analiza el proceso de debilitamiento de /n/ en posición final de palabra y, por otro, la distribución social de un conjunto de lexías, normativamente consideradas como vulgarismos generalizados, en función de su alternancia con las formas del español estándar (como para / pa o luego / aluego, entre otros). En cuanto a la realización de la nasal en posición final de palabra, se observa que, en Málaga, el proceso de debilitamiento se encuentra asentado en la velarización de este segmento, ya que esta realización es prácticamente categórica en todos los contextos. Por otro lado, la distribución social de las variables léxicas analizadas lleva a determinar la existencia de dos patrones diferenciados en función de la edad de los hablantes que las favorecen.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Compact Dual-Mode Substrate Integrated Waveguide Coaxial Cavity for Bandpass Filter Design

  • Sánchez-Soriano, Miguel Ángel
  • Sirci, Stefano
  • Martínez, Jorge D.
  • Boria Esbert, Vicente Enrique
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
This letter proposes a new compact filtering building block. It consists of two via holes embedded into a substrate integrated waveguide (SIW) cavity connected to capacitive metal patches at the top layer. This topology provides two coaxial modes performing a doublet filtering configuration. The proposed dual-mode SIW coaxial cavity is studied in detail and guidelines for the filter design are given. As will be shown, the proposed building block presents a high degree of design flexibility, which allows for the design of multiple kind of bandpass filter (BPF) responses, including both narrow- and wide-band BPFs along with transmission zero generation. As a verification, several filters are designed and implemented at 8 GHz.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diseño y elaboración del corpus SemCor del gallego anotado semánticamente con WordNet 3.0, Design and development of the Galician SemCor corpus semantically tagged with WordNet 3.0

  • Solla Portela, Miguel Anxo
  • Gómez Guinovart, Xavier
En esta presentación describimos la metodología utilizada para la creación del Corpus SensoGal, un corpus paralelo inglés-gallego etiquetado semánticamente con WordNet 3.0 y basado en el SemCor de la lengua inglesa.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design of narrow-band dielectric frequency-selective surfaces for microwave applications

  • Coves Soler, Ángela María
  • Marini, Stephan
  • Gimeno Martínez, Benito
  • Sánchez, Daniel
  • Rodríguez, Ana
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
Two types of narrow-band dielectric frequency-selective surfaces (DFSSs) have been designed at microwave frequencies. First, a DFSS showing total reflection has been analysed under guided-mode resonance conditions, based on a single dielectric grating which is illuminated by a TM polarised two-dimensional plane wave at Brewster-angle incidence, presenting extremely low-reflectance sidebands adjacent to the resonance peak. Second, a DFSS exhibiting total transmission at normal TE incidence has been designed, by superimposing the resonance condition of a dielectric grating on the classical high-reflectance response of a periodic (band-gap based) structure formed by alternating homogeneous dielectric layers. Finally, the oblique incidence and polarisation effects on the spectral response of the designed DFSSs have been also studied. In addition, dielectric ohmic losses and the problem of the finite size of the periodic structures have been accounted for in both structures. The obtained results have been successfully validated with the commercial software tool high frequency structure simulator.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Nanostructured carbon materials: synthesis and applications

  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
The family of carbon nanostructures includes a great number of forms with different properties derived from their reduced dimensionality. In particular, carbon nanotubes (CNTs) and graphene show special electronic, optical, mechanical and chemical properties that allow their potential application in new materials and devices. The real possibilities of pristine CNTs and graphene depend on their synthetic origin, which can be roughly classified into methods starting from graphite and chemical vapor deposition (CVD) processes. Applications of CNTs and graphene encompass electronics, energy devices, multifunctional composites, catalysis and sensors. Their reduced size and weight suggest potential uses in portable, wearable and mobile equipment with a high added value., This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Achievements of Hinode in the first eleven years

  • Al-Janabi, K.
  • Antolin, P.
  • Baker, Deborah
  • Bellot Rubio, Luis R.
  • Bradley, L.
  • Brooks, D.H.
  • Centeno, R.
  • Culhane, J.L.
  • Del Zanna, Giulio
  • Doschek, G.A.
  • Fletcher, L.
  • Hara, H.
  • Harra, L.K.
  • Hillier, A.S.
  • Imada, S.
  • Klimchuk, J.A.
  • Mariska, J.T.
  • Pereira, T.M.D.
  • Reeves, K.K.
  • Sakao, T.
  • Sakurai, T.
  • Shimizu, T.
  • Shimojo, M.
  • Shiota, D.
  • Solanki, S.K.
  • Sterling, A.C.
  • Su, Y.
  • Suematsu, Y.
  • Tarbell, T.D.
  • Tiwari, S.K.
  • Toriumi, S.
  • Ugarte-Urra, I.
  • Warren, H.P.
  • Watanabe, T.
  • Young, P.R.
This is an open access article distributed under the terms of the Creative Commons CC BY license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited., Hinode is Japan's third solar mission following Hinotori (1981-1982) and Yohkoh (1991-2001): it was launched on 2006 September 22 and is in operation currently. Hinode carries three instruments: the Solar Optical Telescope, the X-Ray Telescope, and the EUV Imaging Spectrometer. These instruments were built under international collaboration with the National Aeronautics and Space Administration and the UK Science and Technology Facilities Council, and its operation has been contributed to by the European Space Agency and the Norwegian Space Center. After describing the satellite operations and giving a performance evaluation of the three instruments, reviews are presented on major scientific discoveries by Hinode in the first eleven years (one solar cycle long) of its operation. This review article concludes with future prospects for solar physics research based on the achievements of Hinode. © 2019 The Author(s). Published by Oxford University Press on behalf of the Astronomical Society of Japan., Hinode is a Japanesemission developed and launched by ISAS/JAXA, with NAOJ as a domestic partner and NASA and STFC (UK) as international partners. It is operated by these agencies in cooperation with ESA and NSC (Norway). P. Antolin has received funding from the UK Science and Technology Facilities Council and the European Union Horizon 2020 research and innovation program (grant agreement no. 647214) and his STFC Ernest Rutherford Fellowship (grant agreement no. ST/R004285/1). Numerical computations in subsection 6.1 were carried out on a Cray XC30 at the Center for Computational Astrophysics, NAOJ. He would like to thank I. De Moortel for her valuable comments on subsection 6.1. The work of L. Bellot Rubio was supported by the Spanish Ministerio de Econom ' ia, Industria y Competitividad through projects ESP2014-56169-C6-1-R and ESP2016-77548-C5-1-R, including a percentage from European FEDER funds, and by the European Commission's FP7 Capacities Programme under the SOLARNET project (grant agreement 312495). The work of D. Brooks was performed under contract to the Naval Research Laboratory and was funded by the NASA Hinode program. L. Fletcher was supported by STFC grant number ST/L000741/1 and by the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 606862 (F-CHROMA), and gratefully acknowledges support from the organizers of the Hinode-10 meeting. A. S. Hillier was supported by his STFC Ernest Rutherford Fellowship grant number ST/L00397X/2. T. M. D. Pereira was supported by the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 291058. T. Sakao would like to thank E. DeLuca, M. Weber, K. Reeves, and L. Golub for their careful reading and comments on subsection 2.3. The work of T. Sakurai was supported by JSPS KAKENHI grant numbers JP15K05034 and JP15H05816. The work of D. Shiota and M. Shimojo was partly carried out at the NAOJ Hinode Science Center, which is supported by the Grant-in-Aid for Creative Scientific Research "Basic Study of Space Weather Prediction" from MEXT, Japan (17GS0208, Head Investigator: K. Shibata), generous donations from Sun Microsystems, and NAOJ internal funding. The contribution of S. K. Solanki has received funding from the European Research Council (ERC) under the European Union Horizon 2020 research and innovation program (grant agreement no. 695075) and has been supported by the BK21 plus program through the National Research Foundation (NRF) funded by the Ministry of Education of Korea. A. C. Sterling was supported by funding from the Heliophysics Division of NASA's Science Mission Directorate through the Heliophysics Guest Investigators (HGI) Program; he thanks R. L. Moore and N. K. Panesar for careful reading of subsection 7.2. The work of Y. Su was supported by the NSFC grant no. 11473071, the One Hundred Talent Program of CAS, and by the Youth Fund of Jiangsu no. BK20141043. She is grateful to B. Kliem for his valuable comments on subsection 8.1. S. K. Tiwari would like to thank R. L. Moore for helpful comments on subsection 7.1. His research was supported by an appointment to the NASA Postdoctoral Program at the NASA Marshall Space Flight Center, administered by the Universities Space Research Association under contract with NASA. He gratefully acknowledges his current support by NASA contracts NNG09FA40C (IRIS) and NNM07AA01C (Hinode). The work of S. Toriumi was supported by JSPS KAKENHI grant numbers JP16K17671 and JP15H05814., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC aerogels and xerogels are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a non-polar solvent, taking advantage of the dry BC sorption capacity., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Carbon nanostructures and polysaccharides for biomedical materials

  • González Domínguez, José Miguel
  • Álvarez Sánchez, Miguel Ángel
  • Hadad, Caroline
  • Benito, Ana M.
  • Maser, Wolfgang K.
19 figures, 2 tables., Even though many members from the broad family of carbon nanostructures have been known to us for decades, and despite their promising potential in biology and medicine, there is still a long way ahead to reach the goal of using them in real applications. The cause of such a gap still lies in the persistent drawbacks of insolubility, processability difficulties, poor consistency of macroscopic assemblies and surface inertness of carbon nanostructures. However, solely their direct chemical derivatization might not solve the problem right away. New processing elements need to come into play, but this also twists the whole picture, as the toxicity and performance profiles become more complex. We herein analyse the potential of natural polysaccharides (with a particular focus on cellulose) towards hybrid materials and structures for biomedical purposes. The role that these biopolymers acquire when interfacing with carbon nanostructures goes far beyond a mere dispersing effect, but instead creates unprecedented synergies leading to hydrogels, aerogels, films or fibres with high biocompatibility and bioactivity. In this chapter, the history of carbon nanostructures and natural polysaccharides in the field of biomedical applications will be respectively reviewed, to subsequently go into detail of specific hybrids made with the most relevant biopolymers (namely cellulose, chitin, chitosan and alginate) with extraordinary prospects in biomedicine., Financial support was obtained from MINEICO under project ENE2016-79282-C5-1-R (AEI/UE/FEDER), the Gobierno de Aragón (Grupo Reconocido T03_20R), and a ‘Juan de la Cierva – Incorporación’ research grant (IJCI-2016- 27789)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Catalizadores bimetálicos basados en Ru y Ni para la reacción de reducción de CO2 a CH4

  • Bustinza, Ainhoa
  • Salcedo, Eloy
  • Liu, Yuefeng
  • García-Bordejé, José Enrique
2 figuras.-- Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis, SECAT 2021,"Nuevos Retos de la Catálisis en Química, Medio ambiente y Energía", celebrada en Valencia, del 18 al 20 Octubre 2021., Debido al calentamiento global, el “Green Deal” de la Comisión Europea ha propuesto la reducción de las emisiones de CO2 al menos un 40% respecto los niveles de 1990 y aumentar la cuota de energía renovable al menos un 32%. El principal problema de la energía renovable es que es intermitente y no está alineada con la demanda. Por tanto, hay una necesidad urgente de encontrar medios de almacenar dicha energía. La tecnología de electrolisis del H2O para transformar la electricidad renovable en H2 es una tecnología madura. Sin embargo, el H2 es difícil de almacenar y transportar. El H2 puede convertirse en CH4 haciéndolo reaccionar con CO2 capturado mediante la reacción de Sabatier. De esta manera, se contribuye a cumplir dos objetivos del “Green Deal” europeo: el aumento de la cuota de energías renovables y la reducción de emisiones de CO2. Puesto que es una reacción altamente exotérmica, la concentración de equilibrio de CH4 aumenta la disminuir la temperatura, por lo que es necesario encontrar catalizadores activos a bajas temperaturas. En este trabajo se han preparado dos tipos de catalizadores bimetalicos. Por un lado, se han preparado por impregnación sucesiva catalizadores bimetálicos soportados en alúmina conteniendo: (i) Ni-Ru y (ii) un metal de metanación (Ni o Ru) y metal alcalino (Na, K). Estos catalizadores bimetálicos se han probado en la reacción de metanación de CO2 con H2. El objetivo es mejorar el comportamiento catalítico respecto a los catalizadores monometálicos. En el caso de los catalizadores bimetálicos Ni-Ru la aproximación es mejorar el catalizador reduciendo la cantidad de Ru al mínimo, mientras que en los bimetálicos con metal alcalino la estrategia consiste en aumentar la basicidad del catalizador, y por tanto, favorecer la adsorción de CO2. Se ha estudiado como influyen distintos parámetros de la síntesis por impregnación sucesiva en el comportamiento catalítico y su relación con la estructura y basicidad de los catalizadores caracterizada mediante diversas técnicas instrumentales (XPS, TEM, TPD y TPSR)., Se agradece la ayuda al Ministerio de Ciencia e Innovación por los proyectos ENE2016-79282-C5-1-R (AEI/UE/FEDER) y PID2020-119160RB-C21
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Fotocatalizadores de TiO2 superficialmente enriquecidos en boro para la oxidación del propeno en fase gas

  • Cano Casanova, Laura
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
Resumen del póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes ya que, además de su excelente capacidad oxidativa, es estable, inocuo, biocompatible y asequible económicamente. Sin embargo, es deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco, así como ampliar su intervalo de absorción hacia el espectro visible. Una de las potenciales opciones de mejora se centra en la modificación del TiO2 con boro, lo que podría dar lugar a cambios en la energía y ocupación de los estados electrónicos en mitad de la banda prohibida del semiconductor. De acuerdo con esto, en el presente trabajo se han preparado y caracterizado catalizadores B-TiO2 con distintas cantidades de boro, se han tratado a distinta temperatura de cristalización y se ha analizado su actividad en la reacción de fotooxidación de propeno., La preparación de los fotocatalizadores implica las siguientes etapas: i) la mezcla de 5 ml de TTIP y 50 ml de isopropanol se agrega gota a gota, con agitación constante, a 50 ml de una mezcla de agua / isopropanol (1:1) que contiene una cierta cantidad de ácido bórico (5,10,50,100 y 230 mg). ii) El gel resultante se envejece durante 12 h, después se recoge por filtrado y se seca en un horno a 90 ºC. iii) El TiO2 obtenido se trata térmicamente en un reactor de cuarzo horizontal en atmósfera de aire a 550 °C, aunque en algunos casos también se ha realizado el tratamiento a 450 y 350 ºC. Los fotocatalizadores, que se han nombrado como B-X-TiO2-T, donde X es la cantidad (en mg) de ácido bórico añadido durante la síntesis y T la temperatura de cristalización (en °C), se han caracterizado mediante adsorción física de gases, difracción de rayos X (DRX) y espectroscopía fotoelectrónica de rayos (XPS). Además, algunos de los materiales se han caracterizado por espectroscopía de fotoluminiscencia (PL) y en celda fotoelectroquímica (PEC). La oxidación fotocatalítica de propeno en fase gas se llevó a cabo a temperatura ambiente empleando 0.11 g de fotocatalizador y una corriente de 100 ppmv de propeno en aire, con flujo de 30 ó 60 ml/min, utilizando una lámpara UV (TL8W/05 FAM, Philips) de λ=365 nm. El análisis del gas de salida del reactor se ha realizado mediante espectrometría de masas (OmniStar GSD 301 O1). Los fotocatalizadores B-X-TiO2-550 presentan propiedades texturales similares y pequeñas diferencias en el grado de cristalinidad y proporción de fases cristalinas (anatasa y rutilo). Se ha observado que la presencia de ácido bórico durante la síntesis de TiO2 parece dificultar la formación de rutilo. Además, para las muestras B-100-TiO2-550 y B-230-TiO2-550 se observa un pico adicional (a 2θ= 28. 1º) que corresponde al óxido bórico (B2O3). El análisis por XPS de las muestras B-X-TiO2-550 revela diferencias importantes con respecto al material B-0-TiO2-550, y se ha observado que en las muestras B-100-TiO2-550 y B-230-TiO2-550 el boro está fundamentalmente presente como B2O3 (de acuerdo con los datos de DRX)., En el resto de las muestras se deduce que hay especies BxOy con relación y/x inferior a 1.5. El análisis mediante XPS permite también deducir que, en las muestras con menos cantidad de boro, una mayor proporción del mismo interacciona con la titania. La muestra B-5-TiO2-550 presenta la mayor actividad catalítica. La caracterización de esta muestra mediante medidas de PL y PEC permite explicar dicho resultado, ya que se ha encontrado una disminución drástica de todas las bandas de PL, lo que indica una reducción en la tasa de recombinación de los pares electrón-hueco fotoexcitados. Además, el voltagrama cíclico revela que la irradiación da lugar a una activación pronunciada de ciertos estados superficiales cercanos a la banda de conducción. La temperatura de cristalización también afecta la actividad catalítica. Así, la muestra B-5-TiO2-450 es un 10% más activa que la B-5-TiO2-550. Esta mejora puede deberse a que con el tratamiento a 450 °C no se genera rutilo y a que el enriquecimiento superficial en boro es mayor. Además, los análisis de PL indican que este fotocatalizador presenta una menor recombinación de los pares electrón-hueco y las medidas de fotocorriente muestran un desplazamiento de la longitud de onda de absorción hacia mayores valores, lo que implica que la energía de la banda prohibida (Eg) es menor. La combinación de estas propiedades puede explicar el buen comportamiento obtenido para la muestra tratada a 450 ºC., Los autores agradecen la financiación económica a los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed