Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 109
Encontrada(s) 2 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

Non-contact child sexual abuse: Characteristics in a representative Spanish sample

  • Ferragut-Ortiz-Tallo, Marta
  • Ortiz-Tallo-Alarcón, Margarita
  • Blanca-Mena, María José
https://openpolicyfinder.jisc.ac.uk/id/publication/22301, There is growing interest in understanding non-contact violence in the context of child sexual abuse (CSA). This study explores the characteristics of four types of non-contact CSA in a representative sample of the Spanish population. A sample of 1,071 Spanish adults (53% males; mean age 45.37 years) completed the Child Sexual Abuse Experiences Questionnaire. For each type of non-contact CSA experience, we analyzed the victim’s age at the time of the first incident, the frequency of occurrence, whether the perpetrator was the same individual (if multiple occurrences), the perpetrator’s gender, and the victim’s relationship to the perpetrator. Victim gender differences were examined for all variables. Some form of non-contact abuse had been experienced by 34.50% of the sample. Victims were most commonly aged between 12 and 15 years at the time of the first incident (37.6%), followed by ages 6–11 (31.7%). Over half of the victims (especially females) experienced abuse repeatedly. A significant proportion of those surveyed (55.7%) had been abused by different individuals, mainly males, although the percentage reporting a female perpetrator was higher among male victims. Perpetrators were most commonly an adult stranger or acquaintance, with gender differences emerging in cases where the perpetrator was another minor or someone in a position of responsibility, two scenarios that were more commonly reported by male victims. Non-contact CSA is becoming increasingly common in our connected society and shows specific characteristics that may differ across gender. These characteristics and differences are discussed in this research., Union Europea, Junta de Andalucía
Repisalud
Publication Artículo científico (JournalArticle)

Helpful Criteria When Implementing NGS Panels in Childhood Lymphoblastic Leukemia

  • Vega-Garcia, Nerea
  • Benito, Rocío
  • Esperanza-Cebollada, Elena
  • Llop, Marta
  • Robledo, Cristina
  • Vicente-Garcés, Clara
  • Alonso, Javier
  • Barragan, Eva
  • Fernández, Guerau
  • Hernández-Sánchez, Jesús M
  • Martín-Izquierdo, Marta
  • Maynou, Joan
  • Minguela, Alfredo
  • Montaño, Adrián
  • Ortega, Margarita
  • Torrebadell, Montserrat
  • Cervera, José
  • Sánchez, Joaquín
  • Jiménez-Velasco, Antonio
  • Riesco, Susana
  • Hernández-Rivas, Jesús M
  • Lassaletta, Álvaro
  • Fernández, José María
  • Rives, Susana
  • Dapena, José Luis
  • Ramírez, Manuel
  • Camós, Mireia
  • Spanish Society of Pediatric Hematology and Oncology (SEHOP). Group of Leukemia
The development of Next-Generation Sequencing (NGS) has provided useful diagnostic, prognostic, and therapeutic strategies for individualized management of B-cell precursor acute lymphoblastic leukemia (BCP-ALL) patients. Consequently, NGS is rapidly being established in clinical practice. However, the technology's complexity, bioinformatics analysis, and the different available options difficult a broad consensus between different laboratories in its daily routine introduction. This collaborative study among Spanish centers was aimed to assess the feasibility, pros, and cons of our customized panel and other commercial alternatives of NGS-targeted approaches. The custom panel was tested in three different sequencing centers. We used the same samples to assess other commercial panels (OncomineTM Childhood Cancer Research Assay; Archer®FusionPlex® ALL, and Human Comprehensive Cancer Panel GeneRead Panel v2®). Overall, the panels showed a good performance in different centers and platforms, but each NGS approach presented some issues, as well as pros and cons. Moreover, a previous consensus on the analysis and reporting following international guidelines would be preferable to improve the concordance in results among centers. Our study shows the challenges posed by NGS methodology and the need to consider several aspects of the chosen NGS-targeted approach and reach a consensus before implementing it in daily practice.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structure determination of as-made zeolite ITQ-52 by three-dimensional electron diffraction

  • Tirado-Castaño, Juan Ignacio
  • Das, Partha Pratim
  • Palatinus, Luká
  • Plana-Ruiz, Sergi
  • Simancas, Jorge
  • Simancas, Raquel
  • Nicolopoulos, Stavros
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The complete crystal structures of two as-made zeolites with the ITQ-52 structure (IFW framework type), where an alkylphosphonium and an aminophosphonium dications have been used as their respective organic structure-directing agents, have been solved by three-dimensional electron diffraction. Both organic cations have also been located within the 10-ring that connects the cavities of the IFW framework using the diffraction data., Authors acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-I00 grants funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and grant TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and "European Union Next Generation EU/PRTR") . Authors acknowledge also financial support from Generalitat Valenciana (Project Prometeo 2021/077 and project MFA/2022/047 funded by "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR") . J.I.T. acknowledges grant PRE2018-083623 from project SEV-2016-0683-18-3. The authors acknowledge the Electron Microscopy Service of the Polytechnique University of Valencia (UPV) , the Scientific and Technological Centers of the University of Barcelona (CCiTUB) and the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) for assistance in electron microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evolution of the microstructure and mechanical properties of zirconia-based composites sintered by microwave technology

  • Bonilla-Molina, Ashley
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Moreno, Rodrigo
[EN] This work aims to produce zirconia-based materials by microwave sintering process for dental and prosthetic applications. Two compositions were evaluated: alumina-toughened-zirconia with 25 wt.% Al2O3, stabilized with 10.5 wt.%(Ce, Y), and yttria-stabilized-zirconia (5.4 wt.% Y2O3). The microstructural evolution and its influence on their mechanical properties were analyzed. The composites were sintered by conventional sintering at 1400 and 1500 ¿C with 2 h dwelling, and by microwave sintering at 1200 and 1300 ¿C with 10- and 15-min dwell times, resulting in fully densified ceramics. Relative densities are > 97% and HV higher than 11 GPa for all compositions and sintering conditions. The FESEM images confirm the formation of platelets at higher temperatures, which results in an increase in fracture toughness from 5.0 to 8.2 MPa¿m1/2. The low-thermal-degradation indicates that the composite performs well and that the tetragonal-to-monoclinic transformation is absent after 40 h of ageing, making this material suitable for dental and prosthetic applications., This publication is part of the grant CNS2023 144190 funded by MICIU/AEI/ 10.13039/501,100,011,033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 and CIAICO/2023/264 projects funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extending the Framework for Developing Intelligent Virtual Environments (FIVE) with Artifacts for Modeling Internet of Things Devices and a New Decentralized Federated Learning Based on Consensus for Dynamic Networks

  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Hérnandez López, Luís|||0000-0001-9011-0542
  • Enguix-Andrés, Francisco|||0009-0002-8144-318X
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Rincon, Jaime Andres
[EN] One of the main lines of research in distributed learning in recent years is the one related to Federated Learning (FL). In this work, a decentralized Federated Learning algorithm based on consensus (CoL) is applied to Wireless Ad-hoc Networks (WANETs), where the agents communicate with other agents to share their learning model as they are available to the wireless connection range. When deploying a set of agents, it is essential to study whether all the WANET agents will be reachable before the deployment. The paper proposes to explore it by generating a simulation close to the real world using a framework (FIVE) that allows the easy development and modification of simulations based on Unity and SPADE agents. A fruit orchard with autonomous tractors is presented as a case study. The paper also presents how and why the concept of artifact has been included in the above-mentioned framework as a way to highlight the importance of some devices used in the environment that have to be located in specific places to ensure the full connection of the system. This inclusion is the first step to allow Digital Twins to be modeled with this framework, now allowing a Digital Shadow of those devices., This work has been developed thanks to the funding of projects: Grant PID2021-123673OBC31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe , PROMETEO CIPROM/ 2021/077, TED2021-131295B-C32 and Ayudas del Vicerrectorado de Investigacion de la UPV (PAID-PD-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Self-similar focusing with generalized devil&apos, s lenses

  • Casanova, Cristina
  • Furlan, Walter D.
  • Remón Martín, Laura
  • Calatayud Calatayud, Arnau
  • Mendoza-Yero, Omel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We introduce the generalized devil's lenses (GDLs) as a new family of diffractive kinoform lenses whose structure is based on the generalized Cantor set. The focusing properties of different members of this family are analyzed. It is shown that under plane wave illumination the GDLs give a single main focus surrounded by many subsidiary foci. It is shown that the total number of subsidiary foci is higher than the number of foci corresponding to conventional devil's lenses; however, the self-similar behavior of the axial irradiance is preserved to some extent. (C) 2011 Optical Society of America, We acknowledge the financial support from the Ministerio de Ciencia e Innovacion, Spain, grants DPI2008-02953, TRA2009-0215, and FIS2010-15746. We also acknowledge the support from Generalitat Valenciana (PROMETEO2009-077 and ACOMP/2010/052), and from Universidad Politecnica de Valencia, Spain (PAID-05-09 and PAID-06-08). L. Remon acknowledges a fellowship of "Fundacion Cajamurcia," Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the management efficiency of GPU workloads in data centers through GPU virtualization

  • Iserte, Sergio
  • Reaño González, Carlos
  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
[EN] Graphics processing units (GPUs) are currently used in data centers to reduce the execution time of compute-intensive applications. However, the use of GPUs presents several side effects, such as increased acquisition costs and larger space requirements. Furthermore, GPUs require a nonnegligible amount of energy even while idle. Additionally, GPU utilization is usually low for most applications. In a similar way to the use of virtual machines, using virtual GPUs may address the concerns associated with the use of these devices. In this regard, the remote GPU virtualization mechanism could be leveraged to share the GPUs present in the computing facility among the nodes of the cluster. This would increase overall GPU utilization, thus reducing the negative impact of the increased costs mentioned before. Reducing the amount of GPUs installed in the cluster could also be possible. However, in the same way as job schedulers map GPU resources to applications, virtual GPUs should also be scheduled before job execution. Nevertheless, current job schedulers are not able to deal with virtual GPUs. In this paper, we analyze the performance attained by a cluster using the remote Compute Unified Device Architecture middleware and a modified version of the Slurm scheduler, which is now able to assign remote GPUs to jobs. Results show that cluster throughput, measured as jobs completed per time unit, is doubled at the same time that the total energy consumption is reduced up to 40%. GPU utilization is also increased., Generalitat Valenciana, Grant/Award Number: PROMETEO/2017/077; MINECO and FEDER, Grant/Award Number: TIN2014-53495-R, TIN2015-65316-P and TIN2017-82972-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlling Selectivity at the First Hydrogenation Level: Synthesis of 3-Hydroxyisoindolines by Heterogeneously Silver-Catalyzed Monohydrogenation of Phthalimides

  • Lluna-Galán, Carles
  • Adam, Rosa
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The development of robust nanocatalysts able to mediate important organic transformations with high levels of selectivity constitutes a hot topic in fine-chemistry and catalysis fields. In this context, the rational design of heterogeneous catalysts featuring suitable active sites for obtaining 3-hydroxyisoindolinones by the direct monohydrogenation of highly accessible phthalimides is an attractive approach. This work presents the design and successful catalytic application of a robust and recyclable [Ag/Al2O3] nanomaterial capable to promote the synthesis of a wide range of 3-hydroxylactams through the catalytic monohydrogenation of phthalimides with total atom-economy. It is important to remark that this transformation proceeds with full chemoselectivity, exhibiting complete tolerance to the presence of (hetero)aromatic rings and being able to stop the hydrogenation at the first intermediate level. A deep effort concerning material catalyst optimization and characterization study are performed, determining that the optimal [Ag/Al2O3] is composed of silver nanoparticles with an overall size of 2.3 nm homogeneously distributed across the alumina matrix. The characterization together with the performance of kinetic/mechanistic investigations allows to propose an intimate contact between accessible Ag0 sites and Lewis acidic centers is crucial for the catalyst system to perform the hydrogenative process with complete efficiency., This work was supported by the Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013) and PROMETEO/2021/077 programs and the RETOS I+D+I program from MICINN (PID2019-109656RA-I0/AEI/10.13039/501100011033). The work was also supported by the Spanish Government via the CNS2024-154828 grant funded by MICIU/AEI/10.13039/501100011033 and CNS2023-144172 grant funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. J.R.C.-A. and R.A. thank MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC-2017-22717 and RYC2020-029493-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Topology and Excited State Multiplicity as Controlling Factors in the Carbazole-Photosensitized CPD Formation and Repair

  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Gómez-Mendoza, Miguel
  • Miró, Paula
  • García-Orduña, Pilar
  • Miranda Alonso, Miguel Ángel
[EN] Photosensitized thymine<>thymine (Thy<>Thy) formation and repair can be mediated by carbazole (Cbz). The former occurs from the Cbz triplet excited state via energy transfer, while the latter takes place from the singlet excited state via electron transfer. Here, fundamental insight is provided into the role of the topology and excited state multiplicity, as factors governing the balance between both processes. This has been achieved upon designing and synthesizing different isomers of trifunctional systems containing one Cbz and two Thy units covalently linked to the rigid skeleton of the natural deoxycholic acid. The results shown here prove that the Cbz photosensitized dimerization is not counterbalanced by repair when the latter, instead of operating through-space, has to proceed through-bond., Financial support from the Spanish Government (grant SEV- 2016-0683) , Generalitat Valenciana (PROMETEO/2017/075 and PROMETEO/2021/077) , and Technical University of Valencia (Predoctoral FPI fellowship for P.M.) is gratefully acknowledged. G.S. thanks CTI-CSIC for the use of computa- tional facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Shift-variant digital holographic microscopy: inaccuracies in quantitative phase imaging

  • Doblas, Ana
  • Martinez-Corral, Manuel
  • Saavedra, Genaro
  • Andrés, Pedro
  • Garcia-Sucerquia, Jorge
  • Sánchez-Ortiga, Emilio|||0000-0001-5524-5302
[EN] Inaccuracies introduced in quantitative phase digital holographic microscopy by the use of nontelecentric imaging systems are analyzed. Computer modeling of the experimental result shows that even negligible errors in the radius and center of curvature of the numerical compensation needed to get rid of the remaining quadratic phase factor introduce errors in the phase measurements; these errors depend on the position of the object in the field-of-view. However, when a telecentric imaging system is utilized for the recording of the holograms, the numerical modeling and experimental results show the shift-invariant behavior of the quantitative-phase digital holographic microscope., This work was supported in part by the Ministerio de Ciencia e Innovacion, Spain (Grant DPI2012-32993), and also by Generalitat Valenciana (Grant PROMETEO2009-077). A. Doblas acknowledges a predoctoral fellowship from the University of Valencia. J. Garcia-Sucerquia gratefully acknowledges the Visiting Scholar Fellowship from the Universidad de Valencia, Colciencias grant number 110205024, and UNAL grant numbers 110201003 and 110201004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Generación de fractales a partir del método de Newton

  • Marín, María José
  • Giménez, Fernando
  • Monsoriu, Juan A.
[EN] A large number of fractals known, as Julia fractals and Mandelbrot, can be generated from an iterative method. In this paper we present a virtual laboratory developed as a Graphical User Interface (GUI) of Matlab that allows us to study and visualize in real time the relationship between Newton iterative methods of two variables and the generation of fractals. The main objective is to allow Technical School students in Numerical Computation subjects to acquire the skills to generate fractals and interpret their plots in terms of the convergence or divergence speed of the sequence of iterated., [ES] Un gran número de fractales conocidos, como los fractales de Julia y Mandelbrot, pueden generarse a partir de un método iterativo en el plano. En este trabajo presentamos un laboratorio virtual desarrollado como una interfaz gráfica de usuario (GUI) de Matlab que permite estudiar y visualizar en tiempo real la relación que existe entre los métodos iterativos de Newton de dos variables y la generación de fractales. El objetivo principal es que los estudiantes de asignaturas de Cálculo Numérico en Escuelas Técnicas adquieran las competencias que le permitan generar fractales e interpretar sus gráficas en términos de la velocidad de convergencia o divergencia de la sucesión de iterados., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (FIS2011-23175),la Generalitat Valenciana (PROMETEO2009-077) y la Universidad Politécnica de Valencia(PAID-05-11). Los autores agradecen al Instituto de Ciencias de la Educación de la Universitat Politècnica de València, programa de Equipos de Innovación y Calidad Educativa, por el apoyo dado al Equipo de Modelización Matemática y Aprendizaje Colaborativo (MoMa).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proving Termination of Context-Sensitive Rewriting with MU-TERM

  • Alarcón, Beatriz
  • Iborra, José
  • Gutiérrez Gil, Raúl|||0000-0002-3984-2868
  • Lucas Alba, Salvador|||0000-0001-9923-2108
[EN] Context-sensitive rewriting (CSR) is a restriction of rewriting which forbids reductions on selected arguments of functions. Proving termination of CSR is an interesting problem with several applications in the fields of term rewriting and programming languages. Several methods have been developed for proving termination of CSR. The new version of MU-TERM which we present here implements all currently known techniques. Furthermore, we show how to combine them to furnish MU-TERM with an expert which is able to automatically perform the termination proofs. Finally, we provide a first experimental evaluation of the tool., This work has been partially supported by the EU (FEDER) and the Spanish MEC, under grants TIN2004-7943-C04-02 and HA 2006-0007, the Generalitat Valenciana under grant GV06/285, and the ICT for EU-India Cross-Cultural Dissemination ALA/95/23/2003/077-054 project. Beatriz Alarc¿on was partially supported by the Spanish MEC under FPU grant AP2005-3399.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

AI for Sustainable Recycling: Efficient Model Optimization for Waste Classification Systems

  • Chacón-Albero, Oriol de la Pau
  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincon, Jaime Andres
[EN] The increasing volume of global waste presents a critical environmental and societal challenge, demanding innovative solutions to support sustainable practices such as recycling. Advances in Computer Vision (CV) have enabled automated waste recognition systems that guide users in correctly sorting their waste, with state-of-the-art architectures achieving high accuracy. More recently, attention has shifted toward lightweight and efficient models suitable for mobile and edge deployment. These systems process data from integrated camera sensors in Internet of Things (IoT) devices, operating in real time to classify waste at the point of disposal, whether embedded in smart bins, mobile applications, or assistive tools for household use. In this work, we extend our previous research by improving both dataset diversity and model efficiency. We introduce an expanded dataset that includes an organic waste class and more heterogeneous images, and evaluate a range of quantized CNN models to reduce inference time and resource usage. Additionally, we explore ensemble strategies using aggregation functions to boost classification performance, and validate selected models on real embedded hardware and under simulated lighting variations. Our results support the development of robust, real-time recycling assistants for resource-constrained devices. We also propose architectural deployment scenarios for smart containers, and cloud-assisted solutions. By improving waste sorting accuracy, these systems can help reduce landfill use, support citizen engagement through real-time feedback, increase material recovery, support data-informed environmental decision making, and ease operational challenges for recycling facilities caused by misclassified materials. Ultimately, this contributes to circular economy objectives and advances the broader field of environmental intelligence., This work was partially supported with grant PID2021-123673OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and grant CIPROM/2021/077 from the Conselleria de Innovacio, Universitats, Ciencias i Societat Digital Generalitat Valenciana-PROMETEO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Through-focus response of multifocal intraocular lenses evaluated with a spatial light modulator

  • Remón Martín, Laura
  • Arias, Augusto
  • Calatayud Calatayud, Arnau
  • Furlan, Walter Daniel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
A new testing technique based on the use of a liquid crystal spatial light modulator (SLM) is proposed to analyze the optical quality of multifocal intraocular lenses (MIOLs). Different vergences and decentrations of the incident beam can be programmed onto the SLM in order to record the point spread function (PSF) for different object positions. From these axial PSFs, the through-focus modulation transfer function is computed. Because there are no moving parts in the experimental setup, this method is fast and versatile to assess MIOLs. Experimental results confirm the potential of the proposed method., We acknowledge the financial support from Ministerio de Ciencia e Innovacion (grants FIS2011-23175 and TRA2009-0215), Generalitat Valenciana (grant PROMETEO2009-077), and Universitat Politecnica de Valencia (PAID-05-11), Spain. L. Remon acknowledges a fellowship of "Fundacion Cajamurcia," Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of calcination rate on mechano-chemically activated powders for the synthesis of lead-free KNN-type ceramics

  • Bonilla-Molina, Ashley
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Fernández-González, Daniel
[EN] Given the raising environmental concerns over lead toxicity, replacing the common leadbased piezoelectric ceramics with a proper alternative became a hot topic. (Na0.5K0.5)NbO3 (KNN) is considered a potential replacement for such ceramics. This work presents the synthesis of KNN-type ceramics based on conventional solid-state reaction, where the effect of precursor particle size is studied. A combined mechanical activation by ball milling and calcination at low temperature of 800 ¿C is applied. The phase structure evolution, morphology and mechanical properties are investigated systematically with the particle size and the calcination rate. The results indicate a marked effect of the precursor particle size on the properties of obtained ceramics. Secondary phase content could be lowered and tetragonality improved by the applied approach. Despite the presence of secondary phases, dielectric measurements indicated typical values of dielectric constant and loss for piezoelectric materials., This publication is part of the grant PID2021-128548OBC21 & C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU , and the grant CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 project funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Undergraduate experiment with fractal diffraction gratings

  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Pons, Amparo
  • Gimenez Valentin, Marcos Herminio
  • Furlan, Walter D.
We present a simple diffraction experiment with fractal gratings based on the triadic Cantor set. Diffraction by fractals is proposed as a motivating strategy for students of optics in the potential applications of optical processing. Fraunhofer diffraction patterns are obtained using standard equipment present in most undergraduate physics laboratories and compared with those obtained with conventional periodic gratings. It is shown that fractal gratings produce self-similar diffraction patterns which can be evaluated analytically. Good agreement is obtained between experimental and numerical results. © 2011 IOP Publishing Ltd., We acknowledge financial support from grants DPI2008-02953 and TRA2009-0215, Ministerio de Ciencia e Innovacion, Spain. We also acknowledge support from Generalitat Valenciana through the project PROMETEO2009-077. This work has been developed by Teaching Innovation Groups from the Universitat Politecnica de Valencia (e-MACAFI) and the Universitat de Valencia (GCID35/2009).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Artificial Punishment Signals for Guiding the Decision-Making Process of an Autonomous System

  • Cabrera-Paniagua, Daniel
  • Rubilar-Torrealba, Rolando
  • Castro, Nelson
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
[EN] Somatic markers have been evidenced as determinant factors in human behavior. In particular, the concepts of somatic reward and punishment have been related to the decision-making process; both reward and somatic punishment represent bodily states with positive or negative sensations, respectively. In this research work, we have designed a mechanism to generate artificial somatic punishments in an autonomous system. An autonomous system is understood as a system capable of performing autonomous behavior and decision making. We incorporated this mechanism within a decision model oriented to support decision making on stock markets. Our model focuses on using artificial somatic punishments as a tool to guide the decisions of an autonomous system. To validate our proposal, we defined an experimental scenario using official data from Standard & Poor's 500 and the Dow Jones index, in which we evaluated the decisions made by the autonomous system based on artificial somatic punishments in a general investment process using 10,000 independent iterations. In the investment process, the autonomous system applied an active investment strategy combined with an artificial somatic index. The results show that this autonomous system presented a higher level of investment decision effectiveness, understood as the achievement of greater wealth over time, as measured by profitability, utility, and Sharpe Ratio indicators, relative to an industry benchmark., This research was funded by ANID Chile through FONDECYT INICIACION project no. 11190370, Generalitat Valenciana CIPROM/2021/077 and the Spanish Government by project ID TED2021-131295B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

CLARA: Semi-automatic Retraining System

  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Chacón-Albero, Oriol de la Pau
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Recent advancements in computer vision have led to humanlevel performance in image recognition tasks, but challenges persist in real-world applications due to differences in data distribution. This paper introduces CLARA, a semi-automatic framework designed to continually retrain computer vision models by incorporating expert annotation of new data. The system was tested in a production environment with a waste image classification model and showed improved performance and robustness against evolving data distributions. This approach encourages collaboration among stakeholders in waste management and utilizes human-in-the-loop strategies to enhance model accuracy. The framework is adaptable to various models and tasks and, additionally, supports fusion techniques that combine outputs from multiple models to improve prediction robustness and overall system reliability., This work was partially supported with grant tPID2021- 123673OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital GVA - PROMETEO, grant PAID-06-23 by the Vice Rectorate Office for Research from UPV and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from AVI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study on band gap structure of Fibonacci quantum superlattices by using the transfer matrix method

  • Ferrando, Vicente|||0000-0002-7434-7109
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Marí, B.|||0000-0003-0001-419X
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
The scattering properties of particles in a one-dimensional Fibonacci sequence based potential have been analyzed by means of the Transfer Matrix Method. The electronic band gaps are examined comparatively with those obtained using the corresponding periodic potentials. The reflection coefficient shows self-similar properties for the Fibonacci superlattices. Moreover, by using the generalized Bragg’s condition, the band gaps positions are derived from the golden mean involved in the design of the superlattice structure., We acknowledge the financial support from Ministerio de Ciencia e Innovacion (grant FIS2011-23175), and Generalitat Valenciana (grant PROMETEO2009-077), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Intracrystalline Silanol Defects on the Diffusivity of Benzene in Silicalite Zeolite

  • Misturini, Alechania
  • Kariminasab, Sara
  • Altundal, Ömer Faruk
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Intracrystalline zeolite silanol defect groups (& EQUIV;SiOH) were modelled in silicalite (silica ZSM-5, MFI) using experimental data. We make a molecular dynamics study on the self-diffusivity of benzene in silicalite with defects. The simulations at three different loadings (1, 3 and 5 benzene per unit cell) and temperatures (298, 348 and 398 K) allow to calculate self-diffusivity, adsorption energy and the activation energy. The results show that benzene self-diffusivity in silicalite is increased by the presence of silanol defects. Previous experimental results support this claim., This work was supported by Generalitat Valenciana predoctoral fellowship GRISOLIAP/2019/084. We also thank Generalitat Valenciana for funding through PROMETEO/2021/077 project and CESGA for the use of computational facilities. Financial support by the Ministry of Science and Innovation (MICINN) of Spain through project CEX2021-001230-S (10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Twin axial vortices generated by Fibonacci lenses

  • Calatayud Calatayud, Arnau
  • Remón Martín, Laura
  • WALTER DANIEL FURLAN
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
Optical vortex beams, generated by Diffractive Optical Elements (DOEs), are capable of creating optical traps and other multifunctional micromanipulators for very specific tasks in the microscopic scale. Using the Fibonacci sequence, we have discovered a new family of DOEs that inherently behave as bifocal vortex lenses, and where the ratio of the two focal distances approaches the golden mean. The disctintive optical properties of these Fibonacci vortex lenses are experimentally demonstrated. We believe that the versatility and potential scalability of these lenses may allow for new applications in micro and nanophotonics., We acknowledge the financial support from Ministerio de Economia y Competitividad (grant FIS2011-23175), Generalitat Valenciana (grant PROMETEO2009-077), and Universitat Politecnica de Valencia (SP20120569), Spain. L.R. acknowledges a fellowship of "Fundacion CajaMurcia", Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of the stability of LTA zeolites under natural gas drying TSA conditions

  • Moura, P.A.S.
  • Ferracine, E.D.S.
  • Rodríguez-Aguado, E.
  • Maia, D.A.S.
  • Melo, D. C.
  • Cardoso, D.
  • Bastos-Neto, M.
  • Rodríguez-Castellón, E.
  • Azevedo, D.C.S.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The main features in cationic LTA zeolites that are likely to impact its potential hydrothermal stability are interconnected. The Al content and the compensating cation play an important role in the water adsorption but their influence on the zeolite performance in thermal cycles is yet to be understood. In this study, four LTA zeolite samples were synthetized with distinct Si/Al ratios in sodium and potassium forms. They underwent a Premature Aging Protocol (PAP) that took into account the operating conditions typically found in temperature swing adsorption processes. The Si/Al ratio per se did not impact in the crystallinity upon aging, but the presence of a high amount of potassium cations (Si/Al = 1) led to the amorphization of the zeolite structure. The results from XPS and NMR techniques indicate the Al migration from the outer surface to the inner cages occurs upon aging. Chemical analysis by XRF and ICP-OES associated with 27Al NMR analysis reveal that the presence of EFAl is particularly significant in the sample with the largest Si/Al ratio (5) and is correlated to a much larger C deposition upon aging. TG/DTG and TPD-NH3 experiments suggest that acid sites in the zeolite structures act as a double-edged sword, by enhancing water adsorption while also leading to carbon accumulation. CO2 isotherms at 0 oC reveal the reduction of the microporosity after aging, whereas the Al content is proportional to the water adsorption uptake, particularly at low pressures (below 10 mbar). The material with an intermediate Si/Al ratio and in Na-form (LTAc-SiAl2-Na) combines excellent hydrothermal stability with a high-water affinity and uptake., The authors acknowledge financial support from Petrobras (Brazil) project 2018/00130-5, CAPES (Brazil), particularly in the frame of project CAPES/Print 88887.311867/2018-00 and Servicios Centrales de Apoyo a la Investigacion - SCAI. S.V. and F. R. acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033 and TED2021-130191B-C41 and TED2021-130756B-C31 grants funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR). Authors thank also the financial support by the Generalitat Valenciana (Prometeo 2021/077). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047 and MFA/2022/012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fully Vacuum Deposited Perovskite Solar Cells in Substrate Configuration

  • Abhyuday, Paliwal
  • Zanoni, Kassio P. S.
  • Roldán-Carmona, Cristina
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] This work demonstrates the fabrication of perovskite solar cells in substrate configuration by vacuum-deposition methods. The resultant solar cells demonstrate high efficiency of 19% and thermal stability of more than 550 h. The use of mature and industry-friendly vacuum-deposition methods as well as the demonstrated approach of fabricating the perovskite solar cell may help in the upscaling and future commercialization of perovskite solar cells, The research leading to these results has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for project PROMETEU/2020/077 and A.P. for grant GRISOLIAP/2020/134. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI) project PID2021-126444OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; K.P.S.Z. for grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; and C.R.-C. for grant RYC2019-027187-I funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Directing Role of Aluminum in the Synthesis of PST-21 (PWO), PST-22 (PWW), and ERS-7 (ESV) Zeolites

  • Altundal, Ömer Faruk
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Zeolites are a diverse class of crystalline microporousmaterialsof, mainly, aluminosilicate chemical composition. Organic structure-directingagents (OSDAs) are generally utilized in zeolite synthesis to drivethe outcome to a specific zeolite phase. In addition to OSDA, thepresence and content of aluminum in the gel play a role in drivingthe synthesis under specific conditions. The structure-directing roleof aluminum as well as fluoride in zeolite synthesis was exploredthrough the analysis of three recently synthesized aluminosilicatezeolites, PST-21 (PWO), PST-22 (PWW), and ERS-7 (ESV), using a forcefield simulation approach. An updated and recently proposed methodbased on the calculation of "synthesis energy" is usedto predict the stability of zeolites at pure-silica and aluminosilicategel compositions, also able to include fluoride anions as well asOSDAs, and hence largely general. The results are not only demonstratingthat the calculated structures with lowest "synthesis energy"correspond to those experimentally obtained under "standard"(meaning HF/SDA = 1) synthesis conditions but also that new structuresobtained under the recently introduced "excess fluoride approach"are those which follow with energy slightly larger than the lowest,as calculated from the list of competing zeolites. With this method,we were able to rationalize the structure-directing effect of aluminum,in the presence of fluoride and OSDAs, in the synthesis of zeolites., We thank GVA for PROMETEO/2021/077 project as well as ASIC-UPV and SGAI-CSIC for the use of computational facilities. We also thank the Spanish Ministry of Science and Innovation (Severo Ochoa) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of Machine Vision Techniques in Low-Cost Devices to Improve Efficiency in Precision Farming

  • Jaramillo-Hernández, Juan Felipe
  • Marco-Detchart, Cédric
  • Rincón, Jaime Andrés
  • Julian, Vicente|||0000-0002-2743-6037
[EN] In the context of recent technological advancements driven by distributed work and open-source resources, computer vision stands out as an innovative force, transforming how machines interact with and comprehend the visual world around us. This work conceives, designs, implements, and operates a computer vision and artificial intelligence method for object detection with integrated depth estimation. With applications ranging from autonomous fruit-harvesting systems to phenotyping tasks, the proposed Depth Object Detector (DOD) is trained and evaluated using the Microsoft Common Objects in Context dataset and the MinneApple dataset for object and fruit detection, respectively. The DOD is benchmarked against current state-of-the-art models. The results demonstrate the proposed method's efficiency for operation on embedded systems, with a favorable balance between accuracy and speed, making it well suited for real-time applications on edge devices in the context of the Internet of things., This work was partially supported with grant PID2021-123673OB-C31, TED2021-131295BC32 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , PROMETEO grant CIPROM/2021/077 from the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital Generalitat Valenciana and Early Research Project grant PAID-06-23 by the Vice Rectorate Office for Research from Universitat Politècnica de València (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Capturing Different Intermediate Phases during Zeolite Synthesis

  • Zeng, Jinjin
  • Hong, Suk Bong
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Despite extensive efforts over the past several decades, the current mechanistic understanding of zeolite crystallization is still far from satisfactory, thus precluding the synthesis of designer zeolites. Here we show that the nucleation and in situ transformation pathways during the synthesis of medium-pore zeolite TNU-9 can be altered by controlling the extent of cooperative structure direction between Na+ and Cs+ ions in the presence of 1,4-bis(N-methylpyrrolidinium)butane cations as an organic structure-directing agent. The intermediate phase selectivity was found to change from bikitaite to analcime to layered MCM-22 precursor when the gel Na/Cs ratio was adjusted to 7, 15, and 20, respectively. We also show that the transformation of bikitaite into TNU-9 begins at the surface of intermediate crystals, unlike that of analcime and MCM-22 precursor by a dissolution-recrystallization process. The force field simulation results suggest that the nucleation of different intermediate phases is not thermodynamically but kinetically controlled. This study provides a new basis for advancing the fundamental understanding of zeolite crystallization pathways., We acknowledge financial support from the National Research Foundation of Korea (2021R1A3A-3088711), GVA (PROMETEO/2021/077), MCIN (Severo Ochoa CEX-2021-001230-S), ASIC-UPV, and SGAI-CSIC for the use of computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Asynchronous consensus for multi-agent systems and its application to Federated Learning

  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Picó-Pascual, Aarón|||0000-0002-5612-8033
  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Matagne, Miro-Manuel
  • Rincón-Arango, Jaime Andrés
[EN] Federated Learning (FL) improves the performance of the training phase of machine learning procedures by distributing the model training to a set of clients and recombining the final models in a server. All clients share the same model, each with a subset of the complete dataset, addressing size issues or privacy concerns. However, having a central server generates a bottleneck and weakens the failure tolerance in truly distributed environments. This work follows the line of applying consensus for FL as a no-centralized approach. Moreover, the paper presents a fully distributed consensus in MAS (multi-agent system) modeling and a new asynchronous consensus in MAS (multi-agent system). The paper also includes some descriptions and tests for implementing such learning algorithms in an actual agent platform, along with simulation results obtained in a case study about electrical production in Australian wind farms., This work has been developed thanks to the funding of projects: Grant PID2021-123673OB-C31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe PROMETEO CIPROM/2021/077 TED2021-131295B-C32 Grant of the Vicerrectorado de Investigacion from UPV (PAID-PD22)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of cage topology on ethylene adsorption mechanism in silver exchanged CHA and RHO zeolites: An Inelastic Neutron Scattering and Density Functional study

  • De Marcos-Galán, Alessandra
  • E Silva de Almeida, Gabrielli Maria
  • Martinez-Ortigosa, Joaquin
  • Jiménez-Ruiz, M.
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] Zeolite-based adsorbents have been successfully used for many challenging separations due to their tunable properties. A particularly notable application involves the separation of light olefins from paraffins, wherein the molecular sieving properties of zeolites play a pivotal role. Additionally, the selective interaction of alkenes with transition metal cations, positioned within the channels and cavities of microporous zeolites, further enhances separation capabilities. This study aims to comprehensively characterize the interactions between ethylene and Ag exchanged zeolites, employing a multidisciplinary approach, combining Inelastic Neutron Scattering (INS), Infrared (IR) spectroscopy, Nuclear Magnetic Resonance (NMR), UV¿Vis and Density Functional Theory (DFT) calculations. CHA and RHO, zeolites largely applied in gas separation processes, were chosen due to their similar small pore sizes and pore volume, but different cavity shapes and flexibilities. The interpretation of derived DFT Electron Density Difference, experimentally supported by 13C Solid State NMR results, provide an understanding of each framework¿s role during the charge transfer mechanisms between ethylene and transition metal species. Specific deformations in the flexible framework of zeolite RHO explain a blueshift of the band at 400 cm¿1 in the librational region of INS spectra compared to CHA. This structural change in RHO, represented by the conic shape of the cage 8-ring side pockets, increases steric effects over the adsorbate while rendering the metallic adsorption center less exposed within the zeolite¿s cavity, finally leading to a weaker adsorption energy. The redshift of C=C stretching frequencies observed by IR spectroscopy and DFT calculations, as well as C=C and C-H bond lengthening of ethylene confirm the formation of complexes on silver in both zeolites and allowed a further evaluation of the effects of the different frameworks cages on the aforementioned interaction., Financial support by the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" (Projects: CEX2021-001230-S, PID2022-136934OB-I00) is deeply acknowledged. The authors also thank the Spanish Ministry of Science and Innovation by MCIN /AEI /10.13039/501100011033 and "European Union Next Generation EU/PRTR" (Projects: TED2021-130191B-C41), Generalitat Valenciana, Spain (Project: Prometeo/2021/077) and "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR" (project: MFA/2022/047). All authors thank ILL for neutron beam-time allocation (experiments 7-05-488 and 7 05-522) and ILL C-Lab for computational support. G.A. thanks funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 847439. A.M.G. thanks funding of the grant No SEV 2016-0683-19-2 from Severo Ochoa programme .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiplexing of encrypted data using fractal masks

  • Barrera, J.F.
  • Tebaldi, M.
  • Amaya, D.
  • Furlan, W.D.
  • Bolognini, Nestor Alberto
  • Torroba, Roberto Daniel
  • Amaya, D
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
In this Letter, we present to the best of our knowledge a new all-optical technique for multiple-image encryption and multiplexing, based on fractal encrypting masks. The optical architecture is a joint transform correlator. The multiplexed encrypted data are stored in a photorefractive crystal. The fractal parameters of the key can be easily tuned to lead to a multiplexing operation without cross talk effects. Experimental results that support the potential of the method are presented., This research was performed under grants TWAS-UNESCO Associateship Scheme at Centres of Excellence in the South, CONICET No. 0863 (Argentina), ANCYT PICT 1167 (Argentina), and Facultad de Ingenieria, Universidad Nacional de La Plata No. 11/I125 (Argentina), Sostenibilidad 2011-2012, and CODI (Universidad de Antioquia-Colombia). W. D. Furlan and J. A. Monsoriua acknowledge financial support from Ministerio de Economia y Competitividad (grant FIS2011-23175), Generalitat Valenciana (grant PROMETEO2009-077), and Universitat Politecnica de Valencia (grants PAID-05-11 and PAID-02-11), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Maximizing resource usage in multifold molecular dynamics with rCUDA

  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
  • Imbernon, Baldomero
  • Reaño González, Carlos
  • Peña-García, Jorge
  • Cerón-Carrasco, Jose Pedro
  • Pérez-Sánchez, Horacio
[EN] The full-understanding of the dynamics of molecular systems at the atomic scale is of great relevance in the fields of chemistry, physics, materials science, and drug discovery just to name a few. Molecular dynamics (MD) is a widely used computer tool for simulating the dynamical behavior of molecules. However, the computational horsepower required by MD simulations is too high to obtain conclusive results in real-world scenarios. This is mainly motivated by two factors: (1) the long execution time required by each MD simulation (usually in the nanoseconds and microseconds scale, and beyond) and (2) the large number of simulations required in drug discovery to study the interactions between a large library of compounds and a given protein target. To deal with the former, graphics processing units (GPUs) have come up into the scene. The latter has been traditionally approached by launching large amounts of simulations in computing clusters that may contain several GPUs on each node. However, GPUs are targeted as a single node that only runs one MD instance at a time, which translates into low GPU occupancy ratios and therefore low throughput. In this work, we propose a strategy to increase the overall throughput of MD simulations by increasing the GPU occupancy through virtualized GPUs. We use the remote CUDA (rCUDA) middleware as a tool to decouple GPUs from CPUs, and thus enabling multi-tenancy of the virtual GPUs. As a working test in the drug discovery field, we studied the binding process of a novel flavonol to DNA with the GROningen MAchine for Chemical Simulations (GROMACS) MD package. Our results show that the use of rCUDA provides with a 1.21x speed-up factor compared to the CUDA counterpart version while requiring a similar power budget., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was jointly supported by the Fundación Séneca (Agencia Regional de Ciencia y Tecnología, Región de Murcia) under grants (20524/PDC/18, 20813/PI/ 18, and 20988/PI/18) and by the Spanish MEC and Eur-opean Commission FEDER under grants TIN2015-66972-C5-3-R, TIN2016-78799-P, and CTQ2017-87974-R (AEI/FEDER, UE). Researchers from the Universitat Politècnica de València are supported by the Generalitat Valenciana under grant PROMETEO/2017/077.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Towards a Low-Rank Approach to Compress Deep Neural Networks

  • Liern-Garcia, Marina
  • López-García, Aaron
  • Marco-Detchart, Cédric
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] In this work, we introduce a low-rank approach based on the truncated Singular Value Decomposition (SVD) technique to make deep neural networks (DNNs) smaller. Our method focuses on reducing the overall physical size of a neural network model without losing much in terms of its accuracy or increasing its error noticeably. Specifically, we applied our technique to a modified MobileNetV2 model, in the context of automatic plant diseases detection. We chose two of the biggest layers of the model and compressed them. Our goal was to see how this compression affects the breakdown of the layers, the error in rebuilding the layers, and how well the modified model performs. The results showed that the smaller model still predicts very accurately, even with the reduced physical size of its layers. By making these layers smaller, our approach offers a practical way to handle the deployment of large neural networks, especially in devices with limited resources, without compromising their effectiveness., This work was partially supported with grants TED2021-131295B-C32, PID2021-123673OB-C31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe , PROMETEO grant CIPROM/2021/077 from the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital - Generalitat Valenciana, Early Research Project grant PAID-06-23 by the Vice Rectorate Office for Research from Universitat Politècnica de València (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, Lyzed Arelis
  • Góra-Marek, Kinga
  • Tarach, K. A.
  • Sobalska, J.
  • Plá-Hernandez, Adrián
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Bronsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO2 at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO2, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Bronsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGeneration EU/PRTR and PID2021-126235OB-C31) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundacion Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politecnica de Valencia agreement. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. FT-IR and UV-vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

The Structure Directing Role of Aluminium, Fluoride, and Structural Defects in the Prediction of Zeolite Phase Selectivity Using Molecular Simulations

  • Altundal, Ömer Faruk
[ES] Zeolites are one of the most widely used microporous materials in chemical processes due to their exceptional performances in catalysis, adsorption and ion-exchange applications. In spite of their wide range of chemical compositions, most of the industrially important zeolites are aluminosilicates (or silicates), whose synthesis process is the main topic of this thesis. With the same general chemical composition, aluminosilicate zeolites are polymorph materials, which makes it extremely difficult to predict which phase will be obtained from a given synthesis gel composition. The effect of synthesis variables such as the type of organic molecule (also called organic structure-directing agent, OSDA), Si/Al ratio, presence of defects or fluoride, will be thoroughly investigated in this thesis. With the help of SciFinder, an analysis of ca. 70000 publications was made to generate a database of OSDAs for the synthesis of zeolites. A list of descriptors associated with each OSDA was utilized to extract a subset of 7 OSDAs that give different zeolites under aluminosilicate and silicate gel composition, pointing to a specific role of aluminum for the zeolite phase obtained. Since the role of aluminum in the synthesis process remains less understood, the analysis of this subset of experimental synthesis conditions, combined with geometry optimizations of realistic extended models containing accurate chemical composition similar to experimental results, allowed us to make predictions of which zeolite phase, among a subset of competing phases, is the most stable when the synthesis gel contains either silicate or aluminosilicate composition. Computational predictions are in agreement with the experimental results in almost all of the cases. An extension to the synthesis energy approach was carried out in a still wider chemical space, including the presence of fluoride within the experimentally introduced 'excess fluoride' approach. The literature analysis leads now to the narrow selection of 4 OSDAs giving PST-21 (PWO), PST-22 (PWW), and ERS-7 (ESV) zeolites whose outcome as aluminosilicates has been predicted among a list of other competing zeolites such as FER, RUT, AST, RTH, ITW, STW, FER and MTW. Also, for silica composition, the outcome of ITW and AST has also been predicted among a list of zeolite phase competitors. The role of defects in the synthesis has also been approached using a generalized extension of the synthesis energy, able to predict the thermodynamic stability of defects as one more of the 'anions' (together with aluminum and fluoride) compensating the positive charge of the OSDA. In the zeolite synthesis experiments using various isomers of trimethylpyridinium cations as OSDA under fluoride media, the presence of silanol/siloxy defects, usually not present in such conditions, was detected. Using computational approach, the formation of these defects instead of F- encapsulation was justified. Finally, the influence of defects was explored in the diffusivity of benzene in silicalite (pure-silica ZSM-5, MFI), a well-known zeolite for its shape-selective adsorption properties. Using accurate experimental characterization of connectivity defects, a realistic model of defective ZSM-5 was generated. The self-diffusivities of benzene in both the newly generated defective ZSM-5 model and the defect-free zeolite were calculated through Molecular Dynamics simulations at various loadings and temperatures. Although the self-diffusivities had an order of magnitude discrepancy with the experimental values, the calculated heats of adsorption values were in good agreement with the experimental data. Based on the difference in diffusivities in both models, it was possible to elucidate the effect of structural defects on the diffusion of benzene in silicalite channels. The results support the counterintuitive conclusion that the presence of defects contributes to an enhanced diffusivity of benzene in silicalite., [CA] Las zeolitas son uno de los materiales microporosos más utilizados en procesos químicos debido a sus importantes aplicaciones en catálisis, adsorción e intercambio iónico. A pesar de su amplia gama de composiciones químicas, la mayoría de las zeolitas de importancia industrial son aluminosilicatos (o silicatos), cuyo proceso de síntesis es el tema principal de esta tesis. Con la misma composición química general, las zeolitas aluminosilicatos son materiales polimorfos, lo que hace extremadamente difícil predecir qué fase se obtendrá a partir de una composición de gel de síntesis dada. En esta tesis se investigará exhaustivamente el efecto de variables de síntesis como el tipo de molécula orgánica (también llamada agente director de estructura orgánica, OSDA), la relación Si/Al, la presencia de defectos o fluoruro. Con la ayuda de SciFinder, se realizó un análisis de aproximadamente 70,000 publicaciones para generar una base de datos de OSDAs para la síntesis de zeolitas. Se utilizó una lista de descriptores asociados con cada OSDA para extraer un subconjunto de 7 OSDAs que generan diferentes zeolitas bajo una composición de gel de aluminosilicato y silicato, lo que apunta a un papel específico del aluminio en la fase de zeolita obtenida. Dado que el papel del aluminio en el proceso de síntesis sigue siendo menos comprendido, el análisis de este subconjunto de condiciones experimentales de síntesis, combinado con optimizaciones geométricas de modelos extendidos realistas que contienen una composición química precisa similar a los resultados experimentales, nos permitió hacer predicciones sobre cuál fase de zeolita, entre un subconjunto de fases competidoras, es la más estable cuando el gel de síntesis contiene una composición de silicato o aluminosilicato. Las predicciones computacionales coinciden con los resultados experimentales en casi todos los casos. Se realizó una extensión del enfoque de la energía de síntesis en un espacio químico aún más amplio, que incluye la presencia de fluoruro, dentro del enfoque experimentalmente introducido como 'exceso de fluoruro'. El análisis de la literatura lleva ahora a la selección limitada de 4 OSDAs que generan las zeolitas PST-21 (PWO), PST-22 (PWW) y ERS-7 (ESV), cuyo resultado como aluminosilicatos ha sido predicho entre una lista de otras zeolitas competidoras como FER, RUT, AST, RTH, ITW, STW, FER y MTW. Además, para la composición de sílice, también se ha predicho el resultado de ITW y AST entre una lista de fases de zeolita competidoras. El papel de los defectos en la síntesis también se abordó utilizando una extensión generalizada de la energía de síntesis, capaz de predecir la estabilidad termodinámica de los defectos como uno más de los 'aniones' (junto con el aluminio y el fluoruro) que compensan la carga positiva del OSDA. En los experimentos de síntesis de zeolitas utilizando varios isómeros de cationes trimetilpiridinio como OSDA bajo medios fluorados, se detectó la presencia de defectos de silanol/siloxy, que usualmente no están presentes en tales condiciones. Utilizando este nuevo enfoque computacional, se justificó la formación de estos defectos en lugar de la encapsulación de F-. Finalmente, se exploró la influencia de los defectos en la difusividad del benceno en silicalita (ZSM-5 pura de sílice, MFI), una zeolita bien conocida por sus propiedades de adsorción de forma selectiva. Utilizando una caracterización experimental precisa de los defectos de conectividad, se generó un modelo realista de ZSM-5 con defectos. Las autodifusividades del benceno en el modelo con defectos recién generado de ZSM-5 y en la zeolita libre de defectos se calcularon mediante simulaciones de Dinámica Molecular a diversas concentraciones y temperaturas. Aunque las autodifusividades mostraron una discrepancia de un orden de magnitud con los valores experimentales, los valores calculados de calor de adsorción estaban en buen acuerdo con los datos experimentales. Basándose en la diferencia de difusividades en ambos modelos, fue posible dilucidar el efecto de los defectos estructurales en la difusión del benceno en los canales de silicalita. Los resultados apoyan la conclusión contraintuitiva de que la presencia de defectos contribuye a aumentar la difusividad del benceno en la silicalita., [EN] Les zeolita són un dels materials microporosos més utilisats en processos químics per les seues importants aplicacions en catálisis, adsorció i intercanvi iònic. A pesar de la seua àmplia gama de composicions químiques, la majoria de les zeolita d'importància industrial són aluminosilicatos (o silicat), el procés dels quals de síntesis és el tema principal d'esta tesis. En la mateixa composició química general, les zeolita aluminosilicatos són materials polimorfos, lo que fa extremadament difícil predir qué fase s'obtindrà a partir d'una composició de gel de síntesis donada. En esta tesis s'investigarà exhaustivament l'efecte de variables de síntesis com el tipo de molècula orgànica (també cridada agent director d'estructura orgànica, OSDA), la relació Si/Al, la presència de defectes o fluorur. En l'ajuda de SciFinder, es va realisar un anàlisis d'aproximadament 70,000 publicacions per a generar una base de senyes de OSDAs per a la síntesis d'zeolita. Es va utilisar una llista de descriptores associats en cada OSDA per a extraure un subconjunt de 7 OSDAs que generen diferents zeolita baixe una composició de gel de aluminosilicato i silicat, lo que apunta a un paper específic de l'alumini en la fase d'zeolita obtinguda. Ya que el paper de l'alumini en el procés de síntesis seguix sent menys comprés, l'anàlisis d'este subconjunt de condicions experimentals de síntesis, combinat en optimisacions geomètriques de models estesos realistes que contenen una composició química precisa similar als resultats experimentals, nos va permetre fer prediccions sobre quin fase d'zeolita, entre un subconjunt de fases competidores, és la més estable quan el gel de síntesis conté una composició de silicat o aluminosilicato. Les prediccions computacionals coincidixen en els resultats experimentals en casi tots els casos. Es va realisar una extensió de l'enfocament de l'energia de síntesis en un espai químic encara més ampli, que inclou la presència de fluorur, dins de l'enfocament experimentalment introduït com a 'excés de fluorur'. L'anàlisis de la lliteratura du ara a la selecció llimitada de 4 OSDAs que generen les zeolita PST-21 (PWO), PST-22 (PWW) i ERS-7 (ESV), que el seu resultat com aluminosilicatos ha segut predit entre una llista d'atres zeolita competidores com FER, RUT, AST, RTH, ITW, STW, FER i MTW. Ademés, per a la composició de sílice, també s'ha predit el resultat de ITW i AST entre una llista de fases d'zeolita competidores. El paper dels defectes en la síntesis també es va abordar utilisant una extensió generalisada de l'energia de síntesis, capaç de predir l'estabilitat termodinàmica dels defectes com un més dels 'aniones' (junt en l'alumini i el fluorur) que compensen la càrrega positiva del OSDA. En els experiments de #síntesis d'zeolita utilisant varis isòmers de cationes trimetilpiridinio com OSDA baix mijos fluorados, es va detectar la presència de defectes de silanol/siloxy, que usualment no estan presents en tals condicions. Utilisant este nou enfocament computacional, es va justificar la formació d'estos defectes en lloc de la encapsulación de F-. Finalment, es va explorar l'influència dels defectes en la difusividad del benceno en silicalita (ZSM-5 pura de sílice, MFI), una zeolita ben coneguda per les seues propietats d'adsorció de forma selectiva. Utilisant una caracterisació experimental precisa dels defectes de conectivitat, es va generar un model realiste de ZSM-5 en defectes. Les autodifusividades del benceno en el model en defectes recent generat de ZSM-5 i en la zeolita lliure de defectes es varen calcular per mig de simulacions de Dinàmica Molecular a diverses concentracions i temperatures. Encara que les autodifusividades varen mostrar una discrepància d'un orde de magnitut en els valors experimentals, els valors calculats de calor d'adsorció estaven en bon acort en les senyes experimentals. Basant-se en la diferència de difusivitats en tots dos models, va ser possible dilucidar l'efecte dels defectes estructurals en la difusió del benzè en els canals de silicalita. Els resultats donen suport a la conclusió contraintuïtiva que la presència de defectes contribueix a augmentar la difusivitat del benzè en la silicalita., We thank GVA for the PROMETEO/2021/077 project as well as ASIC-UPV and SGAI-CSIC for the use of computational facilities. S.L. thanks MICINN for the predoctoral grant BES-2017-081245 corresponding to project SEV-2016-0683-17-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Designing a new test for contrast sensitivity function measurement with iPad, Diseño de una nueva prueba para medir la función de sensibilidad al contraste con iPad

  • Rodríguez-Vallejo, Manuel
  • Remón Martín, Laura
  • Furlan, Walter D.
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Purpose: To introduce a new application (ClinicCSF) to measure Contrast Sensitivity Function (CSF) with tablet devices, and to compare it against the Functional Acuity Contrast Test (FACT). Methods: A total of 42 subjects were arranged in two groups of 21 individuals. Different versions of the ClinicCSF (.v1 and .v2) were used to measure the CSF of each group with the same iPad and the results were compared with those measured with the FACT. The agreements between ClinicCSF and FACT for spatial frequencies of 3, 6, 12 and 18 cycles per degree (cpd) were represented by Bland---Altman plots. Results: Statistically significant differences in CSF of both groups were found due to the change of the ClinicCSF version (p < 0.05) while no differences were manifested with the use of the same FACT test. The best agreement with the FACT was found with the ClinicCSF.v2 with no significant differences in all the evaluated spatial frequencies. However, the 95% confidence intervals for mean differences between ClinicCSF and FACT were lower for the version which incorporated a staircase psychophysical method (ClinicCSF.v1), mainly for spatial frequencies of 6, 12 and 18 cpd. Conclusions: The new ClinicCSF application for iPad retina showed no significant differences with FACT test when the same contrast sensitivity steps were used. In addition, it is shown that the accurateness of a vision screening could be improved with the use of an appropriate psychophysical method., [ES] Objetivo: Introducir una nueva aplicación (ClinicCSF) para medir la Función de Sensibilidad al Contraste (FSC) con dispositivos de tableta, y compararla con el test Functional Acuity Contrast Test (FACT). Métodos: Se distribuyeron 42 sujetos en dos grupos de 21 personas. Se utilizaron diferentes versiones del ClinicCSF (.v1 y .v2) para medir la FSC de cada grupo con el mismo iPad, comparándose los resultados obtenidos con los medidos con el test FACT. Se representaron las concordancias entre ClinicCSF y FACT para frecuencias espaciales de 3, 6, 12 y 18 ciclos por grado (cpg) mediante gráficos de Bland---Altman. Resultados: Se hallaron diferencias de FSC estadísticamente significativas en ambos grupos debido al cambio de versión del ClinicCSF (p < 0.05), mientras que no se manifestaron diferencias con el test FACT. La mejor concordancia con el FACT se obtuvo con el ClinicCSF.v2, no hallándose diferencias significativas en todas las frecuencias espaciales evaluadas. Sin embargo, los intervalos de confianza del 95% para las diferencias medias entre ClinicCSF y FACT fueron inferiores para la versión que incorporó un método psicofísico de escalera (ClinicCSF.v1), principalmente para frecuencias espaciales de 6, 12 y 18 cpg. Conclusiones: La nueva aplicación ClinicCSF para el iPad retina no reflejó diferencias significativas con el test FACT al utilizar los mismos pasos de sensibilidad al contraste. Además, la precisión del examen visual puede mejorarse con el uso de un método psicofísico adecuado. © 2014 Spanish General Council of Optometry. Publicado por Elsevier España, S.L.U. Todos los derechos reservados., We acknowledge financial support from Ministerio de Economía y Competitividad (grant FIS2011-23175) and Generalitat Valenciana (grant PROMETEO2009-077), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An autoconfiguration strategy for very large scale long range wide area network deployments in smart cities

  • Torres-Sanz, Vicente
  • Sangüesa, Julio A.
  • Martinez, Francisco J.
  • Garrido, Piedad
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] LoRa has proven to be an ideal solution for Internet of Things networks and applications that require long-distance communications, such as those related to smart cities or precision agriculture. Its low cost combined with the wide availability of LoRa-compatible devices make it possible to easily deploy a large number of sensors capable of collecting and transmitting key information for new services and applications. However, the process of adding new devices into a Long Range Wide Area Network (LoRaWAN) network represents a significant challenge on a large scale, as each device must be individually configured and manually registered to join the network. This manual approach is costly and impractical when it comes to deploying a very large number of devices. To address this problem, this paper proposes two deployment strategies (semi-automatic and automatic) to simplify and streamline the process of activating and registering LoRaWAN devices. These strategies facilitate the deployment of large-scale devices in smart cities, and their adoption can significantly enhance the deployment of LoRaWAN devices. Experimental results clearly demonstrate the benefits of our solution. Specifically, for 500 devices, the semi-automatic deployment is 3.75 times more efficient, and the automatic deployment is an impressive 394.87 times faster than the manual deployment., Government of Aragon and the European Social Fund "Construyendo Europadesde Aragon",Grant/Award Number: T40 23D; MCIN/AEI/10.13039/501100011033and 'ERDFA way of making Europe', Grant/Award Number: PID2021-122580NB-I00;National Cybersecurity Institute, Grant/Award Number: C077/23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bifocal Fibonacci Diffractive Lenses

  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Calatayud Calatayud, Arnau
  • Remón Martín, Laura
  • Furlan, Walter Daniel
  • Saavedra, G.
  • Andrés Bou, Pedro
The focusing properties of diffractive lenses designed using the Fibonacci sequence are studied. It is demonstrated that these lenses present two equal intensity foci and that the ratio of the two focal distances approaches the golden mean. This distinctive optical characteristic is experimentally confirmed. It is suggested that the versatility and potential scalability of these lenses may allow for new applications ranging from X-ray microscopy to THz imaging., This work was supported in part by the Ministerio de Economia y Competitividad under Grants FIS2011-23175 and TRA2009-0215, by the Generalitat Valenciana under Grant PROMETEO2009-077, and by the Universitat Politecnica de Valencia, Spain, under Grants PAID-05-11 and SP20120569. The work of L. Remon was supported by a fellowship of "Fundacion Cajamurcia," Spain. Corresponding author: J. A. Monsoriu (e-mail: jmonsori@fis.upv.es).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of the large pore aluminophosphate STA-1 and its application as a catalyst for the Beckmann rearrangement of cyclohexanone oxime

  • Gonzalez-Camuñas, Nuria
  • Dawson, Daniel M.
  • Lozinska, Magdalena M.
  • Mattock, James
  • Cox, Paul A.
  • Ashbrook, Sharon
  • Wright, Paul
  • Rey, Fernando
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] The preparation of stable large pore aluminophosphate (AlPO) zeotypes offers materials for applications in adsorption and catalysis. Here we report the synthesis of the pure AlPO with the SAO topology type (AlPO STA-1) using N,N '-diethylbicyclo[2.2.2]oct-7-ene-2,3:5,6-dipyrrolidine (DEBOP) as the organic structure directing agent in the presence of fluoride. The AlPO STA-1 can be rendered microporous (pore volume 0.36 cm(3) g(-1)) via calcination and the calcined form remains stable in the presence of moisture. The structure of the dehydrated form has been established by Rietveld refinement (tetragonal P (4) over bar n2, a = 13.74317(10) angstrom, c = 21.8131(5) angstrom, V = 4119.94(16) angstrom(3)). Multinuclear Al-27 and P-31 MAS NMR, together with 2D COSY and CASTEP NMR calculations, enables resolution and assignment of the signals from all crystallographically distinct Al and P framework sites. Structural elucidation of the as-prepared aluminophosphate-fluoride is more challenging, because of the presence of partially protonated OSDA molecules in the 3D-connected channel system and in particular because the fluoride ions coordinate with positional disorder to some of the Al atoms to give 5-fold as well as tetrahedrally-coordinated framework Al species. These are postulated to occupy Al-F-Al bridging sites, where they are responsible for distortion of the framework [P (4) over bar n2, a = 13.3148(9) angstrom, c = 22.0655(20) angstrom, V = 3911.9(7) angstrom(3)]. Calcination and removal of fluoride ions and OSDAs allows the framework to expand to its relaxed configuration. The SAO topology type aluminophosphate can also be synthesised with small amounts of Si and Ge in the framework, and these SAPO and GeAPO STA-1 materials are also stable to template removal. IR spectroscopy with CO as a probe at 123 K indicates all have weak-to-mild acidity, increasing in the order AlPO < GeAPO < SAPO. These STA-1 materials have been investigated for their activity in the Beckmann rearrangement of cyclohexanone oxime to epsilon-caprolactam at 598 K: while all are active, the AlPO form is favoured due to its high selectivity and slow deactivation, both of which are a consequence of its very weak acid strength, which is nevertheless sufficient to catalyse the reaction., Financial support from the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and also, together with, in part, the European Regional Development Fund "ERDF A way of making Europe" (Co-funded projects: CEX2021-001230-S, PID2022-136934OB-100), is gratefully acknowledged. The authors also thank the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) together with the European Regional Development Fund "European Union Next Generation EU/PRTR" (TED2021-130191B-C41), Generalitat Valenciana (Prometeo 2021/077) and "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR" (MFA/2022/047). N. G. C. thanks the Severo Ochoa Program (SEV-2012-0267-02) of the Spanish Ministry of Science, Innovation and University for a pre-doctoral fellowship (BES-2016-078178). Dr Patricia Concepcion and Mr Jose Miguel Salas are thanked for performing the IR spectroscopic study of the CO adsorption on the reported catalyst. The Servicio de Microscopia de la Universitat Politecnica de Valencia is warmly thanked for its technical support. We also gratefully acknowledge funding from the EPSRC (Designed Synthesis of Zeolites: EP/S016201/1, MML, PAW, DMD, SEMA; EP/S016147/1, JM, PAC) for funding. The UK High-Field Solid-State NMR Facility used in this research was funded by EPSRC and BBSRC (EP/T015063/1), as well as the University of Warwick including via part funding through Birmingham Science City Advanced Materials Projects 1 and 2 supported by Advantage West Midlands (AWM) and the European Regional Development Fund (ERDF). Collaborative assistance from the Facility Manager Team (Dinu Iuga and Trent Franks, University of Warwick) is acknowledged. The Scottish High-Field NMR Facility was funded by EPRSC (EP/R030065/1) and measurement time was supported by the University of St Andrews. We are also grateful to EPSRC for support through the Collaborative Computational Project on NMR Crystallography (CCP-NC), via EP/T026642/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Personalized Multimodal AI and AR System for Remote Cognitive Assistance in Aging-in-Place

  • Ferri-Molla, Isabel|||0009-0008-3608-9891
  • Linares-Pellicer, Jordi|||0000-0002-3315-1716
  • Aliaga-Torro, Carlos|||0009-0001-0426-886X
  • Izquierdo-Domenech, Juan|||0000-0003-0076-7001
[EN] The progressive aging of the global population increases the prevalence of mild cognitive impairment (MCI), challenging healthcare systems to support functional independence in daily activities at home. This work presents a privacy-preserving assistive system that integrates multimodal AI with lightweight augmented reality to deliver personalized, step-by-step guidance for instrumental activities of daily living. The architecture orchestrates speech recognition, Retrieval-Augmented Generation, and computer vision through Large Language Models and Vision¿Language Models to provide contextualized assistance. A key contribution is an adaptive closed-loop interaction mechanism that estimates task progress from visual feedback, verifies step completion through VLM-based action recognition, and dynamically adjusts guidance pacing. To increase data protection, raw audio¿visual streams are processed locally at the edge for transcription and verification, while only textual metadata are transmitted to the cloud for high-level reasoning and speech synthesis. A feasibility study with older adults aged 59 to 87 years performing tasks in unfamiliar environments demonstrated that the experimental group required significantly fewer assistance requests than controls, 2.50 vs. 4.43 with p <.001 and |g|=2.14, and reported high satisfaction of 4.48 out of 5. These results provide preliminary evidence of the system¿s feasibility as a framework for cognitive assistance and its potential integration into personalized home healthcare workflows., This work was supported in part by the Generalitat Valenciana under Grant CIACIF/2022/098, Grant CI-PROM/2021/077, and Grant FPU24/02705.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Towards Sustainable Recycling: Advancements in AI-Based Waste Classification

  • Chacón-Albero, Oriol de la Pau
  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Despite global efforts in the pursuit of sustainable waste management practices, significant gaps for improvement persist, as evidenced by Spain¿s recycling rates lagging below European targets. As part of a larger initiative aiming to build an intelligent and collaborative environment to promote the Circular Economy, this paper investigates the potential of Image Classification in developing an intelligent assistant for waste disposal guidance. Tailored to Spain¿s recycling framework, an analysis of different state-of-the-art Image Classification architecture¿s performance on waste sorting is presented. Additionally, the paper explores aggregation techniques to enhance classification accuracy., This work was partially supported with grant PID2021- 123673OB-C31, TED2021-131295B-C32 funded by MCIN/AEI/10.13039/5011 00011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital Generalitat Valenciana - PROMETEO and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from Agencia Valenciana de la Innovación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Improving Performance and Energy Efficiency of Heterogeneous Systems with rCUDA

  • Prades, Javier|||0000-0003-3349-2200
[ES] En la última década la utilización de la GPGPU (General Purpose computing in Graphics Processing Units; Computación de Propósito General en Unidades de Procesamiento Gráfico) se ha vuelto tremendamente popular en los centros de datos de todo el mundo. Las GPUs (Graphics Processing Units; Unidades de Procesamiento Gráfico) se han establecido como elementos aceleradores de cómputo que son usados junto a las CPUs formando sistemas heterogéneos. La naturaleza masivamente paralela de las GPUs, destinadas tradicionalmente al cómputo de gráficos, permite realizar operaciones numéricas con matrices de datos a gran velocidad debido al gran número de núcleos que integran y al gran ancho de banda de acceso a memoria que poseen. En consecuencia, aplicaciones de todo tipo de campos, tales como química, física, ingeniería, inteligencia artificial, ciencia de materiales, etc. que presentan este tipo de patrones de cómputo se ven beneficiadas, reduciendo drásticamente su tiempo de ejecución. En general, el uso de la aceleración del cómputo en GPUs ha significado un paso adelante y una revolución. Sin embargo, no está exento de problemas, tales como problemas de eficiencia energética, baja utilización de las GPUs, altos costes de adquisición y mantenimiento, etc. En esta tesis pretendemos analizar las principales carencias que presentan estos sistemas heterogéneos y proponer soluciones basadas en el uso de la virtualización remota de GPUs. Para ello hemos utilizado la herramienta rCUDA, desarrollada en la Universitat Politècnica de València, ya que multitud de publicaciones la avalan como el framework de virtualización remota de GPUs más avanzado de la actualidad. Los resutados obtenidos en esta tesis muestran que el uso de rCUDA en entornos de Cloud Computing incrementa el grado de libertad del sistema, ya que permite crear instancias virtuales de las GPUs físicas totalmente a medida de las necesidades de cada una de las máquinas virtuales. En entornos HPC (High Performance Computing; Computación de Altas Prestaciones), rCUDA también proporciona un mayor grado de flexibilidad de uso de las GPUs de todo el clúster de cómputo, ya que permite desacoplar totalmente la parte CPU de la parte GPU de las aplicaciones. Además, las GPUs pueden estar en cualquier nodo del clúster, independientemente del nodo en el que se está ejecutando la parte CPU de la aplicación. En general, tanto para Cloud Computing como en el caso de HPC, este mayor grado de flexibilidad se traduce en un aumento hasta 2x de la productividad de todo el sistema al mismo tiempo que se reduce el consumo energético en un 15%. Finalmente, también hemos desarrollado un mecanismo de migración de trabajos de la parte GPU de las aplicaciones que ha sido integrado dentro del framework rCUDA. Este mecanismo de migración ha sido evaluado y los resultados muestran claramente que, a cambio de una pequeña sobrecarga, alrededor de 400 milisegundos, en el tiempo de ejecución de las aplicaciones, es una potente herramienta con la que, de nuevo, aumentar la productividad y reducir el gasto energético del sistema. En resumen, en esta tesis se analizan los principales problemas derivados del uso de las GPUs como aceleradores de cómputo, tanto en entornos HPC como de Cloud Computing, y se demuestra cómo a través del uso del framework rCUDA, estos problemas pueden solucionarse. Además se desarrolla un potente mecanismo de migración de trabajos GPU, que integrado dentro del framework rCUDA, se convierte en una herramienta clave para los futuros planificadores de trabajos en clusters heterogéneos., [CA] En l'última dècada la utilització de la GPGPU(General Purpose computing in Graphics Processing Units; Computació de Propòsit General en Unitats de Processament Gràfic) s'ha tornat extremadament popular en els centres de dades de tot el món. Les GPUs (Graphics Processing Units; Unitats de Processament Gràfic) s'han establert com a elements acceleradors de còmput que s'utilitzen al costat de les CPUs formant sistemes heterogenis. La naturalesa massivament paral·lela de les GPUs, destinades tradicionalment al còmput de gràfics, permet realitzar operacions numèriques amb matrius de dades a gran velocitat degut al gran nombre de nuclis que integren i al gran ample de banda d'accés a memòria que posseeixen. En conseqüència, les aplicacions de tot tipus de camps, com ara química, física, enginyeria, intel·ligència artificial, ciència de materials, etc. que presenten aquest tipus de patrons de còmput es veuen beneficiades reduint dràsticament el seu temps d'execució. En general, l'ús de l'acceleració del còmput en GPUs ha significat un pas endavant i una revolució, però no està exempt de problemes, com ara poden ser problemes d'eficiència energètica, baixa utilització de les GPUs, alts costos d'adquisició i manteniment, etc. En aquesta tesi pretenem analitzar les principals mancances que presenten aquests sistemes heterogenis i proposar solucions basades en l'ús de la virtualització remota de GPUs. Per a això hem utilitzat l'eina rCUDA, desenvolupada a la Universitat Politècnica de València, ja que multitud de publicacions l'avalen com el framework de virtualització remota de GPUs més avançat de l'actualitat. Els resultats obtinguts en aquesta tesi mostren que l'ús de rCUDA en entorns de Cloud Computing incrementa el grau de llibertat del sistema, ja que permet crear instàncies virtuals de les GPUs físiques totalment a mida de les necessitats de cadascuna de les màquines virtuals. En entorns HPC (High Performance Computing; Computació d'Altes Prestacions), rCUDA també proporciona un major grau de flexibilitat en l'ús de les GPUs de tot el clúster de còmput, ja que permet desacoblar totalment la part CPU de la part GPU de les aplicacions. A més, les GPUs poden estar en qualsevol node del clúster, sense importar el node en el qual s'està executant la part CPU de l'aplicació. En general, tant per a Cloud Computing com en el cas del HPC, aquest major grau de flexibilitat es tradueix en un augment fins 2x de la productivitat de tot el sistema al mateix temps que es redueix el consum energètic en aproximadament un 15%. Finalment, també hem desenvolupat un mecanisme de migració de treballs de la part GPU de les aplicacions que ha estat integrat dins del framework rCUDA. Aquest mecanisme de migració ha estat avaluat i els resultats mostren clarament que, a canvi d'una petita sobrecàrrega, al voltant de 400 mil·lisegons, en el temps d'execució de les aplicacions, és una potent eina amb la qual, de nou, augmentar la productivitat i reduir la despesa energètica de sistema. En resum, en aquesta tesi s'analitzen els principals problemes derivats de l'ús de les GPUs com acceleradors de còmput, tant en entorns HPC com de Cloud Computing, i es demostra com a través de l'ús del framework rCUDA, aquests problemes poden solucionar-se. A més es desenvolupa un potent mecanisme de migració de treballs GPU, que integrat dins del framework rCUDA, esdevé una eina clau per als futurs planificadors de treballs en clústers heterogenis., [EN] In the last decade the use of GPGPU (General Purpose computing in Graphics Processing Units) has become extremely popular in data centers around the world. GPUs (Graphics Processing Units) have been established as computational accelerators that are used alongside CPUs to form heterogeneous systems. The massively parallel nature of GPUs, traditionally intended for graphics computing, allows to perform numerical operations with data arrays at high speed. This is achieved thanks to the large number of cores GPUs integrate and the large bandwidth of memory access. Consequently, applications of all kinds of fields, such as chemistry, physics, engineering, artificial intelligence, materials science, and so on, presenting this type of computational patterns are benefited by drastically reducing their execution time. In general, the use of computing acceleration provided by GPUs has meant a step forward and a revolution, but it is not without problems, such as energy efficiency problems, low utilization of GPUs, high acquisition and maintenance costs, etc. In this PhD thesis we aim to analyze the main shortcomings of these heterogeneous systems and propose solutions based on the use of remote GPU virtualization. To that end, we have used the rCUDA middleware, developed at Universitat Politècnica de València. Many publications support rCUDA as the most advanced remote GPU virtualization framework nowadays. The results obtained in this PhD thesis show that the use of rCUDA in Cloud Computing environments increases the degree of freedom of the system, as it allows to create virtual instances of the physical GPUs fully tailored to the needs of each of the virtual machines. In HPC (High Performance Computing) environments, rCUDA also provides a greater degree of flexibility in the use of GPUs throughout the computing cluster, as it allows the CPU part to be completely decoupled from the GPU part of the applications. In addition, GPUs can be on any node in the cluster, regardless of the node on which the CPU part of the application is running. In general, both for Cloud Computing and in the case of HPC, this greater degree of flexibility translates into an up to 2x increase in system-wide throughput while reducing energy consumption by approximately 15%. Finally, we have also developed a job migration mechanism for the GPU part of applications that has been integrated within the rCUDA middleware. This migration mechanism has been evaluated and the results clearly show that, in exchange for a small overhead of about 400 milliseconds in the execution time of the applications, it is a powerful tool with which, again, we can increase productivity and reduce energy foot print of the computing system. In summary, this PhD thesis analyzes the main problems arising from the use of GPUs as computing accelerators, both in HPC and Cloud Computing environments, and demonstrates how thanks to the use of the rCUDA middleware these problems can be addressed. In addition, a powerful GPU job migration mechanism is being developed, which, integrated within the rCUDA framework, becomes a key tool for future job schedulers in heterogeneous clusters., This work jointly supported by the Fundación Séneca (Agencia Regional de Ciencia y Tecnología, Región de Murcia) under grants (20524/PDC/18, 20813/PI/18 and 20988/PI/18) and by the Spanish MEC and European Commission FEDER under grants TIN2015-66972-C5-3-R, TIN2016-78799-P and CTQ2017-87974-R (AEI/FEDER, UE). We also thank NVIDIA for hardware donation under GPU Educational Center 2014-2016 and Research Center 2015-2016. The authors thankfully acknowledge the computer resources at CTE-POWER and the technical support provided by Barcelona Supercomputing Center - Centro Nacional de Supercomputación (RES-BCV-2018-3-0008). Furthermore, researchers from Universitat Politècnica de València are supported by the Generalitat Valenciana under Grant PROMETEO/2017/077. Authors are also grateful for the generous support provided by Mellanox Technologies Inc. Prof. Pradipta Purkayastha, from Department of Chemical Sciences, Indian Institute of Science Education and Research (IISER) Kolkata, is acknowledged for kindly providing the initial ligand and DNA structures.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the performance of physics applications in atom-based clusters with rCUDA

  • Silla, Federico|||0000-0002-6435-1200
  • Prades, Javier|||0000-0003-3349-2200
  • Baydal Cardona, María Elvira
  • Reaño, Carlos
[EN] Traditionally, High-Performance Computing (HPC) has been associated with large power requirements. The reason was that chip makers of the processors typically employed in HPC deployments have always focused on getting the highest performance from their designs, regardless of the energy their processors may consume. Actually, for many years only heat dissipation was the real barrier for achieving higher performance, at the cost of higher energy consumption. However, a new trend has recently appeared consisting on the use of low-power processors for HPC purposes. The MontBlanc and Isambard projects are good examples of this trend. These proposals, however, do not consider the use of GPUs. In this paper we propose to use GPUs in this kind of low-power processor based HPC deployments by making use of the remote GPU virtualization mechanism. To that end, we leverage the rCUDA middleware in a hybrid cluster composed of low-power Atom-based nodes and regular Xeon-based nodes equipped with GPUs. Our experiments show that, by making use of rCUDA, the execution time of applications belonging to the physics domain is noticeably reduced, achieving a speed up of up to 140x with just one remote NVIDIA V100 GPU with respect to the execution of the same applications using 8 Atom-based nodes. Additionally, a rough energy consumption estimation reports improvements in energy demands of up to 37x. (C) 2019 Elsevier Inc. All rights reserved., This work was funded by the Generalitat Valenciana, Spain under Grant PROMETEO/2017/077. Authors are also grateful for the generous support provided by Mellanox Technologies Inc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ageing and seasonal effects on amorphous silicon photovoltaic modules in a Mediterranean climate

  • Mateo, C.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Segui-Chilet, Salvador|||0000-0002-2927-6938
[EN] This contribution presents afield study in which the long-term behaviour of two a-Si photovoltaic plants is studied. Two grid-connected a-Si:H photovoltaic plants located in Valencia (Spain) have been monitored during their first eight years of operation under real outdoor conditions. A per-unit approachand an STC normalisation have been made to analyse and compare photovoltaic plants with differences in electrical characteristics. An averaging process of the filtered and normalised data produces a monthly averaged value that is used to evaluate the ageing and seasonal effects experienced by the two photovoltaic plants. An analysis of the variations in the per unit output power finds that a seasonal effect is superimposed on the long-term stabilisation process. The study concludes that the long-term average stabilisation factor is equal to 1,35% per year, with a seasonal effect that shows a sinusoidal variation with an average amplitude of the sinusoidal oscillation equal to 2,71% per year. An estimation of the energy yield is performed considering the different ageing approaches presented in the study. Using the factors obtained from the experimental values, the ageing and seasonal effects are modelized, and a linear and an exponential expression is proposed to fit the long-term behaviour of both a-Si photovoltaic plants. Results obtained with the statistical analysis are compared with the experimental data and it is found that the exponential behaviour matches the experimental values., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF), the Spanish Ministry of Economy, Industry and Competitiveness, for the research project POLYDECARBOCELL (ENE2017-86711-C3-1-R) and the Generalitat Valenciana, Spain (PROMETEO/2020/077).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fractal square zone plates

  • Calatayud Calatayud, Arnau
  • Furlan, Walter Daniel
  • Saavedra, G.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Gimenez Palomares, Fernando
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this paper we present a novel family of zone plates with a fractal distribution of square zones. The focusing properties of these fractal diffractive lenses coined fractal square zone plates are analytically studied and the influence of the fractality is investigated. It is shown that under monochromatic illumination a fractal square zone plate gives rise a focal volume containing a delimited sequence of two-arms-cross pattern that are axially distributed according to the self-similarity of the lens., We acknowledge the financial support from Ministerio de Ciencia e Innovacion (grants FIS2011-23175 and TRA2009-0215), Generalitat Valenciana (grant PROMETEO2009-077), and Universitat Politecnica de Valencia (grant PAID-05-11), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrothermal Aging Enhances Nitrogen Oxide Reduction over Iron-Exchanged Zeolites at 150 °C

  • Xuechao, Tan
  • Bong Hong, Suk
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Ammonia selective catalytic reduction (NH3-SCR) over copper- and iron-exchanged zeolites is a state-of-the-art technology for removal of nitrogen oxides (NOx, NO, and NO2) from exhaust emissions, but suffers from poor low-temperature (i.e., 150 °C) activity. Here we show that hydrothermal aging of Fe-beta, Fe-ZSM-5, and Fe-ferrierite at 650 °C or higher leads to a remarkable increase in NOx conversion from ~30 to ~80% under fast NH3-SCR conditions at 150 °C. The practical relevance of this finding becomes more evident as an aged Fe-beta/fresh Cu-SSZ-13 composite catalyst exhibits ~90% conversion. We propose that a neutral heteronuclear bis-¿-oxo ironaluminium dimer might be created within iron zeolites during hydrothermal aging and catalyze ammonium nitrate reduction by NO at 150 °C. Density functional theory calculations reveal that the activation free energy (125 versus 147 kJ mol-1) for the reaction of NO with adsorbed NO3- species, the rate-determining step of ammonium nitrate reduction, is considerably lower on the bis-¿-oxo ironaluminium site than on the well-known mononuclear iron-oxo cation site, thus greatly enhancing the overall SCR activity., We acknowledge financial support from the National Creative Research Initiative Program (2021R1A3A3088711) through the National Research Foundation of Korea and GVA (PROMETEO/2021/077), MCIN (Severo Ochoa), ASICUPV, and SGAI-CSIC for the use of computational facilities. We thank Pohang Accelerator Laboratory (PAL) for beam time at the 10C beamline. PAL is supported by MSIP and POSTECH.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gold nanoclusters supported on different materials as catalysts for the selective alkyne semihydrogenation

  • López-Hernández, I.
  • Truttmann, V.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Mengual Cuquerella, Jesús|||0000-0002-8507-509X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalysts based on gold nanoclusters supported by different materials have been used for the selective semi hydrogenation of phenylacetylene to styrene. The most active species were formed by catalyst thermal activation in a reductive atmosphere. It is shown that the activity and selectivity of these catalysts is mainly controlled by the interaction of the gold nanoclusters with the support, as demonstrated by using materials with high surface area and different acidity/basicity, i.e. MgO, Al2O3 and Mg/Al hydrotalcite. There is an important influence of the acid/base properties of the support on the selectivity. Higher activity is obtained for gold supported on basic materials (MgO and hydrotalcite) and the best results are obtained with the Au catalyst supported on the MgAl hydrotalcite exhibiting high activity and the best selectivity to the alkene. This was explained by the intermediate basicity of the support that favors the heterolytic cleavage of H2 while avoiding the overreduction of the alkynes to alkanes., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) , PROMETEO/2021/077 and SEV-2016-0683 projects for the financial support. I. Lopez Hernandez is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017. We acknowledge support by the Austrian Science Fund (FWF) via Single Atom Catalysis (I 4434-N) and Elise Richter (V831-N) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the support of inter-node P2P GPU memory copies in rCUDA

  • Reaño González, Carlos
  • Silla, Federico|||0000-0002-6435-1200
[EN] Although CPUs are being widely adopted in order to noticeably reduce the execution time of many applications, their use presents several side effects such as an increased acquisition cost of the cluster nodes or an increased overall energy consumption. To address these concerns, GPU virtualization frameworks could be used. These frameworks allow accelerated applications to transparently use GPUs located in cluster nodes other than the one executing the program. Furthermore, these frameworks aim to offer the same API as the NVIDIA CUDA Runtime API does, although different frameworks provide different degree of support. In general, and because of the complexity of implementing an efficient mechanism, none of the existing frameworks provides support for memory copies between remote GPUs located in different nodes. In this paper we introduce an efficient mechanism devised for addressing the support for this kind of memory copies among GPUs located in different cluster nodes. Several options are explored and analyzed, such as the use of the GPUDirect RDMA mechanism. We focus our discussion on the rCUDA remote GPU virtualization framework. Results show that is possible to implement this kind of memory copies in such an efficient way that performance is even improved with respect to the original performance attained by CUDA when GPUs located in the same cluster node are leveraged., This work was funded by the Generalitat Valenciana under Grant PROMETEO/2017/077. Authors are also grateful for the generous support provided by Mellanox Technologies Inc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Self-similar behavior in semiconductor superlattices

  • Castro Palacio, J.C.
  • Villatoro Machuca, Francisco R.
  • Mendoza Yero, Omel
  • Velázquez Abad, Luisberis
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
The scattering of particles in fractal superlattices has been analyzed by means of the transfer matrix method. The fractal superlattice consists of alternating layers of semiconductor materials following the rule of a Cantor set. This problem can be represented by a model of quantum particles scattering in piecewise constant potential wells. Fractal properties of the reflection coefficient versus the particle energy curves are examined comparatively to the curves when using the corresponding periodic potentials. The degree of self-similarity of the output variables has been quantified by means of the correlation function., We acknowledge the financial support from Ministerio de Ciencia y Tecnologia (Grants DPI2008-02953 and TRA2009-0215), Spain. We also acknowledge the support from Generalitat Valenciana (PROMETEO2009-077 and ACOMP/2010/052) from Universitat Politecnica de Valencia (PAID-0511), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The influence of zeolite pore topology on the separation of carbon dioxide from methane

  • Pérez-Botella, Eduardo
  • Báfero, Gabriel B.
  • Pastore, Heloise O.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The influence of framework topology on the separation of carbon dioxide from methane has been studied in a set of small pore pure silica zeolites with CHA, IHW, ITW, LTA, MTF and RWR structures. To isolate this effect, the composition of the materials has been kept constant by using pure silica materials, which have neither aluminium in their framework nor extraframework cations that can alter the adsorption behaviour. Pure component adsorption isotherms and breakthrough experiments with synthetic mixtures resembling biogas and natural gas have been conducted. Materials Si-RWR and Si-ITW, which present channel-like topology, show higher IAST selectivities towards CO2 due to a kinetic exclusion of methane, which in the case of Si-RWR is pore -size based and in the case of Si-ITW, topology based. High heat of adsorption of CO2 on Si-ITW is explained through a maximisation of the dispersive interactions between the tight channels and the adsorbate. The extremely small pores of Si-RWR lead to a reduced diffusivity not only of CH4 but also of CO2 precluding its use as adsorbent for this separation. Si-ITW arises as a promising material in the separation of CO2 from CH4 , having high selectivity towards CO2 while keeping high diffusion rates and a moderate maximum capacity. A com-parison of the performance of these materials with that of aluminosilicate zeolites LTA with Si/Al ratio of 5 and 13X shows that Si-ITW can be more convenient by lowering the energetic requirements of the regeneration step. Moreover, the hydrophobicity of this material can be a further advantage over traditional zeolites., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033 and TED2021-130191B-C41 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF Away of making Europe" by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. E.P-B., M.P., F.R. and S.V. thank the financial support by the Generalitat Valenciana (Prometeo 2021/077) . This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) . E.P-B. acknowledges the Spanish Ministry of Education and Professional Training for the grant FPU15/01602. H.O.P. and G.B.B. acknowledge the Conselho Nacional de Pesquisa Cientifica e Tecnologica (CNPq - 140849/2020-3,G.B.B. scholarship) . The Microscopy Service of the UPV is acknowledged for their help in sample characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diffraction by electronic components of everyday use

  • Barreiro, Jesus J.
  • Pons, Amparo
  • Barreiro, Juan C.
  • Castro-Palacio, Juan C.
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We demonstrate the use of CCD image sensors and LCD screens from discarded electronic devices as elements for performing simple optical diffraction experiments. The experiments can determine the spatial structure of these components by analyzing diffraction patterns generated by their interaction with monochromatic light. This article presents the design and results of such experiments. (C) 2014 American Association of Physics Teachers., The authors would like to thank the financial support of the Ministerio de Economía y Competitividad (Projects: DPI2012-32994 and FIS2011-23175), the Generalitat Valenciana (Project: PROMETEO2009-077), Universitat Polite`cnica de Vale`ncia (PAID-05-11). This work has been developed by the teaching innovation groups GCID35/2009 and MoMa from the Universitat de Vale`ncia and Universitat Polite`cnica de Vale`ncia, respectively. The authors would also like to thank Dr. Michael Devereux for kindly revising the manuscript as a native English-speaking person.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New insights into fluoride&apos, s role in MFI zeolites: unveiling the link between location and synthesis conditions

  • Martinez-Ortigosa, Joaquin
  • Simancas-Coloma, Jorge
  • Martineau-Corcos, Charlotte
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Vidal Moya, José Alejandro
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] This study examines the fluoride distribution in pure silica MFI zeolite synthesized in fluoride medium using various tetra-alkyl ammonium and phosphonium cations as organic structure directing agents (OSDAs). The 19F NMR spectra show a resonance at similar to-65 ppm, related with the presence of fluoride atoms in the t-mel cage bonded to the silicon at T9 site, and another signal at similar to-80 ppm. Through DFT calculations, the similar to-80 ppm 19F NMR resonance is attributed to fluoride within the t-mel cage bonded to silicon at the T12 site. Thus, the results reported here reveal that, contrary to previous reports, there is more than one position for fluoride in the zeolite structure. The location of fluoride at T12 is stabilized by using bulky OSDAs and by increasing the concentration of defects in the MFI framework. Moreover, it is shown that the OSDA used in the synthesis determines the content and distribution of siloxy-silanol defects and fluoride in pure silica MFI zeolite. These findings highlight the impact of synthesis parameters in the charge distribution in zeolites, which ultimately governs key structural properties and potential applications of zeolite materials in catalysis and adsorption processes., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-I00 grants funded by MCIN/AEI/10.13039/501100011033 funded by "ERDF A way of making Europe" and TED2021-130191B-C41 grant funded by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. Authors thank also the financial support by the Generalitat Valenciana (Prometeo 2021/077). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/012 and MFA/2022/047). Financial support from the IR INFRANALYTICS FR2054 for conducting the research is gratefully acknowledged. J. M.-O. acknowledges the financial support from the European Union - NextGeneration EU through the Universitat Politecnica de Valencia, Ministerio de Universidades, Plan de Recuperacion, Transformacion y Resiliencia for the Margarita Salas grant. Authors thank funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic roles in AgentSpeak

  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Duric, Bogdan Okresa
[EN] Roles are a fundamental construct in human organizations to structure behavior, distribute responsibilities and facilitate effective team cooperation. Incorporating this notion in multi-agent systems, especially in deliberative architectures such as the Belief-Desire-Intentions (BDI) model, allows for organizing more clearly the interactions between agents, promoting functional specialization and improving coordination in complex tasks. The use of dynamic roles is presented as a key mechanism to provide agents with greater organizational flexibility and adaptability. Although some approaches have addressed this idea, they tend to rely on ad hoc mechanisms, external to the agent's deliberative cycle, without offering an integrated and reusable solution in different domains. This paper presents a dynamic role model for AgentSpeak. Roles are formalized as a set of beliefs and plans within the agent's knowledge, allowing them to be directly manipulated by standard deliberative mechanisms. The BDI reasoning cycle is further extended so that plan selection is contextually dependent on the agent's active roles. A set of communicative acts is also defined that allows agents to assign and transfer roles, along with their associated beliefs and plans, during execution. Finally, a case study is presented in a multi-agent capture-the-flag scenario, where agents demonstrate their ability to strategically reorganize and adapt roles at runtime., This work is partially supported by Generalitat Valenciana CIPROM/2021/077, Grant PID2021-123673OB-C31 funded by gobierno de Espana MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", MOBODL-2023-08-5618 funded by the European Union and the Croatian Science Foundation and "Funding for open access charge: CRUE-Universitat Politecnica de Valencia".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental generation and characterization of Devil&apos, s vortex-lenses

  • Calatayud Calatayud, Arnau
  • Rodrigo, J.A.
  • Remón Martín, Laura
  • Furlan, W.D.
  • Cristóbal, G.
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
We propose the first experimental approach for both generation and characterization of high quality Devil's vortex-lenses. These new type of lenses, able to produce a sequence of optical vortices, are addressed onto a programmable spatial light modulator (SLM) operating in phase-only modulation. The static aberrations arising by the lack of flatness of the SLM display are characterized and mostly compensated by using a Shack - Hartmann wavefront sensor. The analysis of the residual aberrations and their effect on the vortex-lens performance are studied. © Springer-Verlag 2012., The financial support of the Spanish Ministry of Science and Innovation under projects DPI2008-02953, TRA2009-0215 and TEC2010-20307 is acknowledged. We also acknowledge the support from Generalitat Valenciana through the project PROMETEO2009-077. J.A.R. gratefully acknowledges a "Juan de la Cierva" grant and the financial assistance provided by the Universitat Politecnica de Valencia (grants PAID-02-10 and PAID-5-11). L. R. acknowledges a fellowship of "Fundacion Cajamurcia", Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cantor dust zone plates

  • Ferrando, Vicente|||0000-0002-7434-7109
  • Gimenez Palomares, Fernando
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Calatayud Calatayud, Arnau
  • Furlan, Walter Daniel
In this paper we use the Cantor Dust to design zone plates based on a two-dimensional fractal for the first time. The pupil function that defines the coined Cantor Dust Zone Plates (CDZPs) can be written as a combination of rectangle functions. Thus CDZPs can be considered as photon sieves with rectangular holes. The axial irradiances produced by CDZPs of different fractal orders are obtained analitically and experimentally, analyzing the influence of the fractality. The transverse irradiance patterns generated by this kind of zone plates has been also investigated., We acknowledge the financial support from Ministerio de Economia y Competitividad (grants FIS2011-23175 and TRA2009-0215), Generalitat Valenciana (grant PROMETEO2009-077), and Universitat Politecnica de Valncia (PAID-05-11), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and Structure Determination by 3D Electron Diffraction of the Extra-large Pore Zeolite ITQ-70

  • Tirado-Castaño, Juan Ignacio
  • Sala, Andrés
  • Bordes, Antonio
  • Pratim Das, Partha
  • Palatinus, Luká
  • Nicolopoulos, Stavros
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] In this study, we present the synthesis, characterization, and structural analysis of a novel zeolite, ITQ-70, using 3D electron diffraction. This unique material was synthesized under alkaline conditions, employing tetrakis(diethylamino)phosphonium as an organic structure-directing agent, leading to the formation of a pure silica zeolite. ITQ-70 is distinguished by its extra-large pore apertures, which extend along all three axes and intersect one to the other. A notable feature of this zeolite is the presence of structurally ordered defects in very high concentrations (38 % of the silicon atoms). As a result, ITQ-70 exhibits the lowest framework density (10.0 T/1000ų) ever reported for any zeolite except RWY (7.6 T/1000ų), which contains sulfur instead of oxygen connecting T-atoms., We thank CTI-CSIC and ASIC-UPV for computational facilities. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-100 grants funded by MCIN/AEI/10.13039/ 501100011033 funded by "ERDF A way of making Europe" and TED2021-130191B-C41 grant funded by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. The authors thank also the financial support of the Generalitat Valenciana (Prometeo 2021/077). A.S. thanks for the grant BES-2016-078684 and J.I.T. thanks for financial support from Severo Ochoa Program PRE2018-083623. This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/012 and MFA/2022/047). The authors acknowledge the Electron Microscopy Service of the Polytechnique University of Valencia (UPV) for assistance in electron microscopy characterization. The authors thank Antonio L. Llamas-Saiz from the Unidad de Rayos X (& Aacute;rea Infraestructuras e Investigacion) of the Universidad de Santiago de Compostela for the structural elucidation of the OSDA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring Federated Learning Tendencies Using a Semantic Keyword Clustering Approach

  • Enguix-Andrés, Francisco|||0009-0002-8144-318X
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Rincón-Arango, Jaime Andrés
[EN] This paper presents a novel approach to analyzing trends in federated learning (FL) using automatic semantic keyword clustering. The authors collected a dataset of FL research papers from the Scopus database and extracted keywords to form a collection representing the FL research landscape. They employed natural language processing (NLP) techniques, specifically a pre-trained transformer model, to convert keywords into vector embeddings. Agglomerative clustering was then used to identify major thematic trends and sub-areas within FL. The study provides a granular view of the thematic landscape and captures the broader dynamics of research activity in FL. The key focus areas are divided into theoretical areas and practical applications of FL. The authors make their FL paper dataset and keyword clustering results publicly available. This data-driven approach moves beyond manual literature reviews and offers a comprehensive overview of the current evolution of FL., This research was funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe grant number PID2021-123673OB-C31 and funded by VAE-VADEN UPV grant number TED2021-131295B-C32 and funded by GUARDIA grant number PROMETEO CIPROM/2021/077 and funded by Ayudas del Vicerrectorado de Investigacion de la UPV grant number PAID-PD-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Perovskite/Perovskite Tandem Solar Cells in the Substrate Configuration with Potential for Bifacial Operation

  • Gil-Escrig, Lidón
  • Hu, Shuaifeng
  • Zanoni, Kassio P. S.
  • Paliwal, Abhyuday
  • Roldán-Carmona, Cristina
  • Sessolo, Michele
  • Wakamiya, Atsushi
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] Perovskite/perovskite tandem solar cells have recently exceeded the record power conversion efficiency (PCE) of single-junction perovskite solar cells. They are typically built in the superstrate configuration, in which the device is illuminated from the substrate side. This limits the fabrication of the solar cell to transparent substrates, typically glass coated with a transparent conductive oxide (TCO), and adds constraints because the first subcell that is deposited on the substrate must contain the wide-bandgap perovskite. However, devices in the substrate configuration could potentially be fabricated on a large variety of opaque and inexpensive substrates, such as plastic and metal foils. Importantly, in the substrate configuration the narrow-bandgap subcell is deposited first, which allows for more freedom in the device design. In this work, we report perovskite/perovskite tandem solar cells fabricated in the substrate configuration. As the substrate we use TCO-coated glass on which a solution-processed narrow-bandgap perovskite solar cell is deposited. All of the other layers are then processed using vacuum sublimation, starting with the charge recombination layers, then the wide-bandgap perovskite subcell, and finishing with the transparent top TCO electrode. Proof-of-concept tandem solar cells show a maximum PCE of 20%, which is still moderate compared to those of best-in-class devices realized in the superstrate configuration yet higher than those of the corresponding single-junction devices in the substrate configuration. As both the top and bottom electrodes are semitransparent, these devices also have the potential to be used as bifacial tandem solar cells., The research leading to these results received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for Projects IDIFEDER/2018/061 and PROME-TEU/2020/077; A.P. for Grant GRISOLIAP/2020/134; K.P.S.Z. for Grant APOSTD/2021/368; C.R.-C. for Project CIDEGENT/2020/046; M.S. for Project CISEJI/2022/43. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; L.G.-E. for Grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; M.S. for Grant RYC-2016-21316 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in Your Future". This work was also supported by the JST-Mirai Program (JPMJMI22E2), NEDO, the International Collaborative Research Program of ICR, Kyoto University, a Grant-in-Aid for Scientific Research (A) (21H04699), JSPS (Research Fellowship for Young Scientists 21J14762), and the Chinese Scholarship Council (CSC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Persuasion-enhanced computational argumentative reasoning through argumentation-based persuasive frameworks

  • Ruiz-Dolz, Ramon
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Heras, Stella|||0000-0001-6212-9377
  • García-Fornes, A|||0000-0003-4482-8793
[EN] One of the greatest challenges of computational argumentation research consists of creating persuasive strategies that can effectively influence the behaviour of a human user. From the human perspective, argumentation represents one of the most effective ways to reason and to persuade other parties. Furthermore, it is very common that humans adapt their discourse depending on the audience in order to be more persuasive. Thus, it is of utmost importance to take into account user modelling features for personalising the interactions with human users. Through computational argumentation, we can not only devise the optimal solution, but also provide the rationale for it. However, synergies between computational argumentative reasoning and computational persuasion have not been researched in depth. In this paper, we propose a new formal framework aimed at improving the persuasiveness of arguments resulting from the computational argumentative reasoning process. For that purpose, our approach relies on an underlying abstract argumentation framework to implement this reasoning and extends it with persuasive features. Thus, we combine a set of user modelling and linguistic features through the use of a persuasive function in order to instantiate abstract arguments following a user-specific persuasive policy. From the results observed in our experiments, we can conclude that the framework proposed in this work improves the persuasiveness of argument-based computational systems. Furthermore, we have also been able to determine that human users place a high level of trust in decision support systems when they are persuaded using arguments and when the reasons behind the suggestion to modify their behaviour are provided., This work is partially supported by the Spanish Government projects PID2020-113416RB-I00, the Generalitat Valenciana project CIPROM/2021/077, and TAILOR, a project funded by EU Horizon 2020 research and innovation programme under GA No 952215Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pt-zeolites as active catalysts for the removal of chlorate in water by hydrogenation reactions

  • Plá-Hernandez, Adrián
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic hydrogenation is used to remove chlorate ions from water streams by using platinum catalysts supported on zeolites with different topologies (FAU, BEA, MWW, MFI and MOR), Si/Al ratio and compensating cation. It is observed that there is an important influence of the zeolite characteristics on the catalytic activity. The best results have been obtained with the catalyst supported on zeolites with a high number of acid centres, this is with a low Si/Al ratio and with protons, as counter-cation species compensating aluminium charge. The acid sites favour the interaction of the catalyst with the reactants and influence the neighbouring Pt species improving the redox properties of the catalyst. It is shown that with an adequate number of acid sites it is possible to decrease the metal content, keeping the same catalytic activity, by increasing the metal dispersion. The highest activity is obtained with an acidic FAU zeolite, with low Si/Al ratio and 1 wt% of Pt added by ion exchange. This catalyst is able to simultaneously reduce chlorate and chlorite ions and chlorate and bromate ions indicating that it is a multifunctional catalyst that can be utilized for removing different pollutants in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe " by the European Union NextGenerationEU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing large-scale docking simulation on heterogeneous systems: An MPI vs rCUDA study

  • Imbernón, Baldomero
  • Gimenez Canovas, Domingo
  • Cecilia, J. M.
  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
[EN] Virtual Screening (VS) methods can considerably aid clinical research by predicting how ligands interact with pharmacological targets, thus accelerating the slow and critical process of finding new drugs. VS methods screen large databases of chemical compounds to find a candidate that interacts with a given target. The computational requirements of VS models, along with the size of the databases, containing up to millions of biological macromolecular structures, means computer clusters are a must. However, programming current clusters of computers is no easy task, as they have become heterogeneous and distributed systems where various programming models need to be used together to fully leverage their resources. This paper evaluates several strategies to provide peak performance to a GPU-based molecular docking application called METADOCK in heterogeneous clusters of computers based on CPU and NVIDIA Graphics Processing Units (GPUs). Our developments start with an OpenMP, MPI and CUDA METADOCK version as a baseline case of cluster utilization. Next, we explore the virtualized GPUs provided by the rCUDA framework in order to facilitate the programming process. rCUDA allows us to use remote GPUs, i.e. installed in other nodes of the cluster, as if they were installed in the local node, so enabling access to them using only OpenMP and CUDA. Finally, several load balancing strategies are analyzed in a search to enhance performance. Our results reveal that the use of middleware like rCUDA is a convincing alternative to leveraging heterogeneous clusters, as it offers even better performance than traditional approaches and also makes it easier to program these emerging clusters., This work is jointly supported by the Fundacion Seneca (Agencia Regional de Ciencia y Tecnologia, Region de Murcia) under grant 18946/JLI/13, and by the Spanish MEC and European Commission FEDER under grants TIN2015-66972-C5-3-R and TIN2016-78799-P (AEI/FEDER, UE). We also thank NVIDIA for hardware donation under GPU Educational Center 2014-2016 and Research Center 2015-2016. Furthermore, researchers from Universitat Politecnica de Valencia are supported by the Generalitat Valenciana under Grant PROMETEO/2017/077. Authors are also grateful for the generous support provided by Mellanox Technologies Inc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Context-Sensitive Dependency Pairs

  • Alarcón, Beatriz
  • Gutiérrez Gil, Raúl|||0000-0002-3984-2868
  • Lucas Alba, Salvador|||0000-0001-9923-2108
[EN] Termination is one of the most interesting problems when dealing with context-sensitive rewrite systems. Although there is a good number of techniques for proving termination of context-sensitive rewriting (CSR), the dependency pair approach, one of the most powerful techniques for proving termination of rewriting, has not been investigated in connection with proofs of termination of CSR. In this paper, we show how to use dependency pairs in proofs of termination of CSR. The implementation and practical use of the developed techniques yield a novel and powerful framework which improves the current state-of-the-art of methods for proving termination of CSR., This work has been partially supported by the EU (FEDER) and the Spanish MEC, under grant TIN 2004-7943-C04-02, the Generalitat Valenciana under grant GV06/285, and the ICT for EU-India Cross-Cultural Dissemination ALA/95/23/2003/077-054 project. Beatriz Alarcón was partially supported by the Spanish MEC under FPU grant AP2005-3399.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pt-V bimetallic catalysts for the catalytic reduction of chlorate ion pollutants in natural water

  • Plá-Hernandez, Adrián
  • Gora-Marek, K.
  • Tarach, K. A.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Pt-V bimetallic catalysts supported on alumina are studied for the chlorate hydrogenation reaction in water phase. It is observed that there is a synergic effect between Pt and V that enhances the catalytic activity. The activity of both mono and bimetallic catalysts has been studied in polluted natural water containing other ionic species together with the chlorate ion. It is observed that the monometallic catalysts are not active in these conditions as there is a competitive adsorption of the other anions present in natural water for the Pt active sites. Contrarily, Pt-V catalysts are active in natural water being able to reduce the chlorate ions of the media in presence of other ions. The materials have been characterized by different techniques observing that the addition of vanadium to the Pt-Al2O3 modifies the electronic properties of the platinum sites, due to a high electronic interaction of both metals. This interaction favours the formation of partially positively charged platinum nanoclusters and strength the acidity of the catalyst surface. Infrared characterization using CO as probe molecule provided selective information about the centres participating in the reaction. It is shown that there is a correlation between the intensity of the band around 2100 cm(-1), assigned to the interaction CO-Pt+delta and the initial activity of the catalysts. This indicates that partially charged Pt nanoclusters are the most active sites for the chlorate reduction. The combination of the noble and the non-noble metal and their interaction with the alumina support, improves the redox and acid properties of the catalyst enhancing its activity and making possible the reduction of chlorate pollutants in natural water., Authors thank the financial support of the Ministerio Espanol de Ciencia e Innovacion (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union Next Generation EU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Ministerio Espanol de Ciencia e Innovacion for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. The FT-IR research was partially carried out using research infrastructure purchased with the funds of the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20-00, "ATOMIN 2.0 - ATOMic scale science for the INnovative economy"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Subtractive imaging in Confocal Scanning Microscopy using a CCD camera as a detector

  • Sanchez-Ortiga, E.
  • Sheppard, C.J.R.
  • Saavedra, G.
  • Martinez-Corral, M.
  • Doblas, A.
  • Calatayud Calatayud, Arnau
[EN] We report a scheme for the detector system of confocal microscopes in which the pinhole and a large-area detector are substituted by a CCD camera. The numerical integration of the intensities acquired by the active pixels emulates the signal passing through the pinhole. We demonstrate the imaging capability and the optical sectioning of the system. Subtractive-imaging confocal microscopy can be implemented in a simple manner, providing superresolution and improving optical sectioning. (C) 2012 Optical Society of America, This work was supported by the Plan Nacional I+D+I under grant FIS2009-9135 and also by Generalitat Valenciana under grant PROMETEO2009-077.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Imaging quality of multifocal intraocular lenses: automated assessment setup

  • Calatayud, Arnau
  • Remón, Laura
  • Martos, Julio
  • Furlan, Walter D.
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Purpose: A new technique for the assessment of the optical quality of multifocal intraocular lenses (MIOLs) under monochromatic and polychromatic illumination is presented. Methods: The system provides, in a totally automated procedure, the modulation transfer function (MTF) of the lens under test for different axial positions of the object. The artificial eye admits different artificial corneas, to optimise the axial resolution in the sampling of the MTF of the MIOL under test, and different pupils, to test the dependence of the optical performance of the MIOL on the eye pupil diameter. Results: The performance and sensitivity of the apparatus is tested with different commercial MIOLs. The through-focus MTF for a refractive MIOL was measured at different moments during the process of hydration of a hydrophilic lens. Next, to show the performance of our proposal, two commercial refractive and diffractive MIOLs were evaluated. Conclusions: We have designed a precise and robust optical method for testing MIOLs in vitro. The proposed method represents a valuable technical improvement to make the procedure of MIOL evaluation more versatile, efficient and trustworthy., We acknowledge the financial support from Ministerio de Economia y Competitividad (grants FIS2011-23175 and TRA2009-0215), Generalitat Valenciana (grant PROMETEO2009-077), and Univeritat Politecnica de Valencia (INNOVA SP20120569), Spain. L.R. acknowledges a fellowship of 'Fundacion Cajamurcia', Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multispectral integral imaging acquisition and processing using a monochrome camera and a liquid crystal tunable filter

  • Latorre-Carmona, Pedro
  • Xiao, Xiao
  • Pla, Filiberto
  • Martinez-Corral, Manuel
  • Navarro, Héctor
  • Saavedra, Genaro
  • Javidi, Bahram
  • Sánchez-Ortiga, Emilio|||0000-0001-5524-5302
[EN] This paper presents an acquisition system and a procedure to capture 3D scenes in different spectral bands. The acquisition system is formed by a monochrome camera, and a Liquid Crystal Tunable Filter (LCTF) that allows to acquire images at different spectral bands in the [480,680] nm wavelength interval. The Synthetic Aperture Integral Imaging acquisition technique is used to obtain the elemental images for each wavelength. These elemental images are used to computationally obtain the reconstruction planes of the 3D scene at different depth planes. The 3D profile of the acquired scene is also obtained using a minimization of the variance of the contribution of the elemental images at each image pixel. Experimental results show the viability to recover the 3D multispectral information of the scene. Integration of 3D and multispectral information could have important benefits in different areas, including skin cancer detection, remote sensing and pattern recognition, among others., This work was supported in part by the Spanish Ministry of Science and Innovation under the projects ALFI3D TIN 2009-14103-C 03-01, Consolider Ingenio 2010CSD 2007- 00018, EODIX AYA 2008-05965-C04-04/ESP, and FIS2009-9135, and also by the Generalitat Valenciana through the projects PROMETEO/2010/028 and PROMETEO2009-077.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards Robust Industrial Control Interpretation Through Comparative Analysis of Vision-Language Models

  • Izquierdo-Domenech, Juan|||0000-0003-0076-7001
  • Linares-Pellicer, Jordi|||0000-0002-3315-1716
  • Aliaga-Torro, Carlos|||0009-0001-0426-886X
  • Ferri-Molla, Isabel|||0009-0008-3608-9891
[EN] Industrial environments frequently rely on analog control instruments due to their reliability and robustness; however, automating the interpretation of these controls remains challenging due to variability in design, lighting conditions, and scale precision requirements. This research investigates the effectiveness of Vision¿Language Models (VLMs) for automated interpretation of industrial controls through analysis of three distinct approaches: general-purpose VLMs, fine-tuned specialized models, and lightweight models optimized for edge computing. Each approach was evaluated using two prompting strategies, Holistic-Thought Protocol (HTP) and sequential Chain-of-Thought (CoT), across a representative dataset of continuous and discrete industrial controls. The results demonstrate that the fine-tuned Generative Pre-trained Transformer 4 omni (GPT-4o) significantly outperformed other approaches, achieving low Mean Absolute Error (MAE) for continuous controls and the highest accuracy and Matthews Correlation Coefficient (MCC) for discrete controls. Fine-tuned models demonstrated less sensitivity to prompt variations, enhancing their reliability. In contrast, although general-purpose VLMs showed acceptable zero-shot performance, edge-optimized models exhibited severe limitations. This work highlights the capability of fine-tuned VLMs for practical deployment in industrial scenarios, balancing precision, computational efficiency, and data annotation requirements., Work was partially supported by Generalitat Valenciana CI-PROM/2021/077 and FPI grant CIACIF/2022/098
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chloride nutrition improves drought resistance by enhancing water deficit avoidance and tolerance mechanisms

  • Franco-Navarro, Juan D.
  • Díaz-Rueda, Pablo
  • Rivero-Núñez, Carlos M.
  • Brumós, Javier
  • Rubio-Casal, Alfredo E.
  • de Cires, Alfonso
  • Colmenero-Flores, José M.
  • Rosales, Miguel A.
[EN] Chloride (Cl-), traditionally considered harmful for agriculture, has recently been defined as a beneficial macronutrient with specific roles that result in more efficient use of water (WUE), nitrogen (NUE), and CO2 in well-watered plants. When supplied in a beneficial range of 1-5 mM, Cl- increases leaf cell size, improves leaf osmoregulation, and reduces water consumption without impairing photosynthetic efficiency, resulting in overall higher WUE. Thus, adequate management of Cl- nutrition arises as a potential strategy to increase the ability of plants to withstand water deficit. To study the relationship between Cl- nutrition and drought resistance, tobacco plants treated with 0.5-5 mM Cl- salts were subjected to sustained water deficit (WD; 60% field capacity) and water deprivation/rehydration treatments, in comparison with plants treated with equivalent concentrations of nitrate, sulfate, and phosphate salts. The results showed that Cl- application reduced stress symptoms and improved plant growth during water deficit. Drought resistance promoted by Cl- nutrition resulted from the simultaneous occurrence of water deficit avoidance and tolerance mechanisms, which improved leaf turgor, water balance, photosynthesis performance, and WUE. Thus, it is proposed that beneficial Cl- levels increase the ability of crops to withstand drought, promoting a more sustainable and resilient agriculture., This work was supported by Spanish Ministry of Science Innovation and Universities-FEDER grants AGL2015-71386-R and RTI2018094460-B-I00, Spanish National Research Council grants CSIC201840E132, CSIC-201940E039, and CSIC-201940E077, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 895613. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). Help, expertise, and technical assistance of P. Peinado-Torrubia, P. Cubero-Font, A. Vazquez-Rodriguez, S. Luque-Gonzalez, M.M. Rubio-Wilhelmi, E. Gutierrez-Gonzalez, Y. Pinto-Gonzalez, F.J. Moreno-Racero, and F.J. Duran, statistics support of V. Hernandez-Santana and A. Diaz-Espejo, and valuable comments of I. Dodd are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of structural defects in the fluoride-mediated synthesis of aluminosilicate zeolites

  • Kemp, Kingsley Christian
  • Jo, Donghui
  • Huang, Weidong
  • Wang, Qiang
  • Deng, Feng
  • Hong, Suk Bong
  • Altundal, Ömer Faruk
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] The existence of framework defects in zeolites, an important class of industrial catalysts and adsorbents, has long been recognized, but little is known about their exact role in zeolite crystallization. Here we show that despite their relatively high framework Al content (Si/Al = 11.5-13.8), as-synthesized PWO, PWW and RTH zeolites, obtained using various trimethylpyridinium cation isomers as organic structure-directing agents (OSDAs) in concentrated fluoride media, contain unexpectedly large amounts of SiO-<middle dot><middle dot><middle dot>HOSi defects which counterbalance the charge of 11-39% of the total OSDA cations occluded per unit cell, but have only a negligible amount (<0.1 ions per unit cell) of fluoride anions. The results suggest that the phase selectivity of the crystallization in the presence of fluoride ions may be determined by a combination of Al incorporation into the silicate framework, the type of OSDAs used and the microstructure and concentration of SiO-<middle dot><middle dot><middle dot>HOSi defects formed. This study provides a new basis for better understanding the fundamental aspects of zeolite crystallization mechanisms., This work was supported by the National Creative Research Initiative Program (2021R1A3A-3088711) through the National Research Foundation of Korea, EcoPro HN, the KRICT Institutional Research Program (KK2412-10), GVA (PROMETEO/2021/077), MCIN (Severo Ochoa), ASIC-UPV and SGAI-CSIC for the use of computational facilities, the International Partnership Program of the Chinese Academy of Sciences (314GJH2022022FN) and Hubei International Scientific and Technological Cooperation Program (2024EHA043) and Base (SH2303). We thank H. Koller (University of Munster) and M. A. Camblor (ICMM) for valuable discussion and PAL (Pohang, Korea) for beam time at beamline 2D (D. H. Moon) and 5A (H. H. Lee). PAL is supported by MSIP and POSTECH.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Redesigning the rCUDA communication layer for a better adaptation to the underlying hardware

  • Reaño, Carlos
  • Silla, Federico|||0000-0002-6435-1200
[EN] The use of Graphics Processing Units (GPUs) has become a very popular way to accelerate the execution of many applications. However, GPUs are not exempt from side effects. For instance, GPUs are expensive devices which additionally consume a non-negligible amount of energy even when they are not performing any computation. Furthermore, most applications present low GPU utilization. To address these concerns, the use of GPU virtualization has been proposed. In particular, remote GPU virtualization is a promising technology that allows applications to transparently leverage GPUs installed in any node of the cluster. In this paper, the remote GPU virtualization mechanism is comparatively analyzed across three different generations of GPUs. The first contribution of this study is an analysis about how the performance of the remote GPU virtualization technique is impacted by the underlying hardware. To that end, the Tesla K20, Tesla K40, and Tesla P100 GPUs along with FDR and EDR InfiniBand fabrics are used in the study. The analysis is performed in the context of the rCUDA middleware. It is clearly shown that the GPU virtualization middleware requires a comprehensive design of its communication layer, which should be perfectly adapted to every hardware generation in order to avoid a reduction in performance. This is precisely the second contribution of this work, ie, redesigning the rCUDA communication layer in order to improve the management of the underlying hardware. Results show that it is possible to improve bandwidth up to 29.43%, which translates into up to 4.81% average less execution time in the performance of the analyzed applications., Generalitat Valenciana, Grant/Award Number: PROMETEO/2017/077
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Beyond Avelino&apos, s scientific achievements: The building process of a community in catalysis

  • Miro, Pedro
  • Lázaro, Jesús
  • Pérez Pascual, Miguel
  • Frontela, Juana
  • Pérez Pariente, Joaquín
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The scientific career of Avelino has recently been reviewed in some detail [1] and the contributions included in this special issue provide additional valuable and extensive insights into several aspects of his activities from a variety of perspectives, written with the purpose of completing the picture of Avelino as the author of outstanding breakthroughs in zeolite science and catalysis. But, it is precisely his excellence in science that motivates some key questions that have never been properly addressed, not at least in printing form: how all these achievements came into being? What is the nature of the process that has made such wide range of innovations possible? How the material and human resources required for that successful process were gathered and organized? These questions are usually not of primary concern for scientific journals, as this one is, and are in general best regarded as more suitable for historically oriented publications, and even for social and philosophical aspects of the scientific research. However, we think that these questions are relevant to those scientists who are actively contributing to the fields that Avelino has explored so successfully over the years, as well as to all those who wish to understand through the study of Avelino's career how science is practiced and organized as a human activity., The authors are very grateful to Prof Vicente Fornes for providing us some invaluable information that has been included in this article. Unfortunately, Prof Fornes has refused to appear on the list of authors of this article. The authors also thank Dra. Julia Aguilar, who belonged to ITQ, for providing us with a copy of the picture included in Fig. 2. Also, the Generalitat Valenciana, Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital is acknowledged for their funding via project Prometeo/2021/077.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Carbonylation of dimethyl ether in mordenite using Inelastic Neutron Scattering

  • Jiménez-Ruiz, Mónica
  • Lemishko, Tetiana
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Zeolite mordenite (MOR, Si/Al =10) was used as catalyst for the reaction between CO and dimethyl ether (DME) to give methyl acetate. Since the reaction is catalysed by Bronsted acid sites, Inelastic Neutron Scattering (INS) is an appropriate technique to identify the intermediates. Although the accepted mechanism goes through an adsorbed methoxy, its characteristic peak at 963 cm-1 was only detected in the reaction MOR + DME, in the absence of CO. When CO is present, the peak at 963 cm-1 is substituted by other peaks that give valuable in-formation of the reaction intermediates, indicating that either methoxy intermediates are not formed or are quickly replaced by the acetyl intermediate, [SiO(COCH3)Al], strongly stabilised in the micropore pockets of mordenite. Upon reaction of MOR + CO + DME, a characteristic peak at 1050 cm-1, although being present in liquid methyl acetate, could not be assigned to adsorbed methyl acetate since it loses intensity as the reaction proceeds (upon heating), and was assigned to a strong interaction between CO and DME adsorbed in one or two Bronsted sites, leading to some intermediate that shares this vibrational feature with methyl acetate in liquid phase. Finally, a peak at 1275 cm-1 in the spectrum of MOR + CO + DME upon heating is assigned to the formation of methyl acetate when the sample is heated, corresponding to C-O stretching of methyl acetate. This is further confirmed by the absence of this peak before heating. Overall, INS technique has allowed an accurate determination and interpretation of peaks involved in the carbonylation of DME in mordenite., We thank CTI-CSIC for computational facilities. We thank ILL for neutron beam-time allocation (experiment 7-05-470). Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033 funded by "ERDF A way of making Europe" and TED2021-130191B-C41 grant funded by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. Authors thank also the financial support by Generalitat Valenciana (Prometeo 2021/077). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intra-node Memory Safe GPU Co-Scheduling

  • Reaño González, Carlos
  • Nikolopoulos, Dimitrios S.
  • Varghese, Blesson
  • Silla, Federico|||0000-0002-6435-1200
[EN] GPUs in High-Performance Computing systems remain under-utilised due to the unavailability of schedulers that can safely schedule multiple applications to share the same GPU. The research reported in this paper is motivated to improve the utilisation of GPUs by proposing a framework, we refer to as schedGPU, to facilitate intra-node GPU co-scheduling such that a GPU can be safely shared among multiple applications by taking memory constraints into account. Two approaches, namely a client-server and a shared memory approach are explored. However, the shared memory approach is more suitable due to lower overheads when compared to the former approach. Four policies are proposed in schedGPU to handle applications that are waiting to access the GPU, two of which account for priorities. The feasibility of schedGPU is validated on three real-world applications. The key observation is that a performance gain is achieved. For single applications, a gain of over 10 times, as measured by GPU utilisation and GPU memory utilisation, is obtained. For workloads comprising multiple applications, a speed-up of up to 5x in the total execution time is noted. Moreover, the average GPU utilisation and average GPU memory utilisation is increased by 5 and 12 times, respectively., This work was funded by Generalitat Valenciana under grant PROMETEO/2017/77.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analyzing the performance/power tradeoff of the rCUDA middleware for future exascale systems

  • Reaño González, Carlos
  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
[EN] The computing power of supercomputers and data centers has noticeably grown during the last decades at the cost of an ever increasing energy demand. The need for energy (and power) of these facilities has finally limited the evolution of high performance computing, making that many researchers are concerned not only about performance but also about energy efficiency. However, despite the many concerns about energy consumption, the search for computing power continues. In this regard, the research on exascale systems, able to deliver 10(18) floating point operations per second, has reached a widely consensus that these systems should operate within a maximum power budget of 20 megawatts. Many efficiency improvements are necessary for achieving this goal. One of these improvements is the usage of ARM low-power processors, as the Mont-Blanc project proposes. In this paper we analyze the combined use of ARM processors with the rCUDA remote GPU virtualization middleware as a way to improve efficiency even more. Results show that it is possible to speed up applications by almost 8x while reducing energy consumption up to 35% when rCUDA is used to access high-end GPUs. These improvements are achieved while maintaining a feasible average power consumption level for future exascale systems., This work was funded by the Generalitat Valenciana under Grant PROMETEO/2017/077. Authors are also grateful for the generous support provided by Mellanox Technologies Inc and for the equipment donated by NVIDIA Corporation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Open Framework Structure of the New Pure-Germania Zeolite ITQ-35 Solved by 3D Electron Diffraction

  • Tirado-Castaño, Juan Ignacio
  • Das, Partha Pratim
  • Palatinus, Luká
  • Nicolopoulos, Stavros
  • Valero-Jiménez, José
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] A pure open-framework germanate material is obtained using an organic structure directing agent (OSDA) prepared by a photochemically induced[2 + 2] cycloaddition reaction. The structure of this new material, named ITQ-35, is determined by combining precession electron diffraction tomography (PEDT) and powder X-ray diffraction (PXRD) methods. This material presents tridirectional 8-ring pores connected by 12-ring channels, with one of the lowest framework densities reported until now for a pure germania zeolitic material (12.7 T/1000 & Aring;3), and similar to that of the aluminogermanate PKU-9, The authors thank CTI-CSIC and ASIC-UPV for computational facilities. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-100 grants funded by MCIN/AEI/10.13039/ 501100011033 funded by "ERDF A way of making Europe" and TED2021-130191B-C41 grant funded by the European Union Next Generation EU/PRTR) is gratefully acknowledged. The authors also thank the financial support of the Generalitat Valenciana (Prometeo 2021/077). J.I.T. thanks the financial support from the Severo Ochoa Program PRE2018-083623. This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/012 and MFA/2022/047). The authors acknowledge the Electron Microscopy Service of the Polytechnic University of Valencia (UPV) for assistance in electron microscopy characterization. The electron diffraction experiments at the Institute of Physics of the Czech Academy of Sciences were performed within the project Terafit CZ.02.01.01/00/22_008/0004594 and supported by the CzechNanoLab project LM2023051, both funded by MEYS CR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Building lactams by highly selective hydrodeoxygenation of cyclic imides using an alumina-supported AgRe bimetallic nanocatalyst

  • Lluna-Galán, Carles
  • Arango-Daza, Juan Camilo
  • Sun, Rong
  • Calvino, Jose Juan
  • Simonelli, Laura
  • Adam, Rosa
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The rational design of robust nanocatalysts containing the suitable active sites for building relevant organic compounds, such as lactams, is a desired approximation towards the development of a sustainable fine chemistry field. In that sense, the design of a proper nanomaterial able to mediate the selective hydrodeoxygenation of cyclic imides to lactams with high tolerance to the preservation of aromatic rings remains rather unexplored. Here, we show the design of a bimetallic AgRe nanomaterial with notable activity and selectivity to mediate this transformation affording more than 60 lactams from the corresponding imides. Interestingly, in this work we disclose that the optimal AgRe nanocatalyst is constituted by AgReO4 nanoaggregates that undergo an in situ hydrogenative dispersion to form the active centers composed by Ag0 nanoparticles and ReOx species. Deep characterization, together with kinetic and mechanistic studies, have revealed that the intimate Ag-Re contact intrinsic to AgReO4 species is key for the formation of the most active catalytic sites and the proper bimetallic cooperation required for mediating the desired process., This work was supported by Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013), PROMETEO/2021/077 and CIAICO/2021/2138 programs and a program from "La Caixa" Foundation (ID 100010434), fellowship code LCF/BQ/PI18/11630023. The work was also funded by Spanish Government via MICINN with RETOS I + D + I program (PID2019-109656RA-I0 / AEI / 10.13039/501100011033), grants CNS2023-144172, PID2020-113006-RB-I00, PID2021-1262350B-C31, TED2021-130191B-C44 and TED2021-130756B-C32 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. This study forms part of the Advanced Materials program supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (grant MFA/2022/016). R. A. and J. R. C.-A. thank to MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC2020-029493-I and RYC-2017-22717). XAS experiments were performed at BL22-CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022075907). ELECMI-ICTS facilities (proposal ELC402023) are also acknowledged for electron microscopy experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular Simulation of Biobutanol Recovery Using LTA and CHA Zeolite Nanosheets with External Surface

  • Misturini, Alechania
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] LTA and CHA zeolites with silica and silico-alumino-phosphate (SAPO) composition have been recently proposed by Van der Perre et al.1 to recover butanol from a mixture of butanol, ethanol, acetone and water. Such mixture is obtained from biomass fermentation, which is a sustainable alternative for butanol production. Here, we establish a computational methodology to simulate the 3 steps process, consisting of: selective adsorption of butanol, with some ethanol and water, from the initial mixture, using a silica LTA nanosheet; desorption of the adsorbed mixture by increasing the temperature; adsorption of the desorbed products in a CHA (silica or SAPO) nanosheet. A combination of Monte Carlo simulations, allowing to reproduce or predict single or multiple-component gas adsorption isotherms, as well as molecular dynamics, giving the time evolution of the selective adsorption and desorption processes, have been used to model the experimental setup. A recently parameterized force field of general use for zeolites, AlPOs and SAPOs has been tuned up in order to describe all interactions arising from this model, allowing to capture the thermodynamics of the system, the flexibility of the frameworks, and the effects of surface and bulk in the permeability of the nanosheets., This work was supported by Generalitat Valenciana (GVA) predoctoral fellowship GRISOLIAP/2019/084. We also thank GVA for PROMETEO/2021/077 project and ASIC-UPV and SGAI-CSIC for the use of computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sugar-based synthesis of an enantiomorphically pure zeolite

  • Sala-Gascon, Andres
  • Llamas-Saiz, Antonio L.
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] Zeolites, well-known by their high selectivities in catalytic and separation processes due to their porous nature, play a crucial role in various applications. One significant long-term objective is the synthesis of enantiopure zeolites, potentially enabling enantioselective processes. Earlier attempts result in partial success, yielding some enantiomorphically enriched zeolites. In this study, we introduce a zeolite synthesis approach utilizing chiral organic structure directing agents (ch-OSDAs) derived from sugars, guiding the crystallization process toward achieving enantiomorphically pure S-STW zeolite. The purity of the zeolite is confirmed through extensive analyses of individual crystals using single-crystal X-ray diffraction, extracting Flack parameters and space groups. Theoretical and structural investigations confirm that the sugar-derived ch-OSDA perfectly fits the characteristic helicoidal channel of the zeolite structure, featuring its efficacy in achieving enantiopure zeolites., Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S and PID2022-136934OB-100 grants funded by MCIN/AEI/10.13039/ 501100011033 funded by ERDF A way of making Europe and TED2021 130191B-C41 grant funded by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. The authors also thank the financial support of the Generalitat Valenciana (Prometeo 2021/077). A.S. thanks for the grant BES-2016 078684. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/012 and MFA/2022/047).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Personalized Cognitive Support via Social Robots

  • Rincón-Arango, Jaime Andrés
  • Marco-Detchart, Cédric
  • Julian, Vicente|||0000-0002-2743-6037
[EN] This paper explores the use of personalized cognitive support through social robots to assist the elderly in maintaining cognitive health and emotional well-being. As aging populations grow, the demand for innovative solutions to address issues like loneliness, cognitive decline, and physical limitations increases. The studied social robots utilize machine learning and advanced sensor technology to deliver real-time adaptive interactions, including cognitive exercises, daily task assistance, and emotional support. Through responsive and personalized features, the robot enhances user autonomy and improves quality of life by monitoring physical and emotional states and adapting to the needs of each user. This study also examines the challenges of implementing assistive robots in home and healthcare settings, offering insights into the evolving role of AI-powered social robots in eldercare., This work was partially supported by grant PID2021-123673OB-C31, TED2021-131295B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and PROMETEO grant CIPROM/2021/077 from the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital-Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Meltable, Glass-Forming, Iron Zeolitic Imidazolate Frameworks

  • León-Alcaide, Luis
  • Christensen, Rasmus S.
  • Keen, David A.
  • Brotons-Alcázar, Isaac
  • Forment-Aliaga, Alicia
  • Mínguez Espallargas, Guillermo
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
[EN] We describe the first meltable iron-based zeolitic imidazolate framework (ZIF), denoted MUV-24. This material, elusive from direct synthesis, is obtained from the thermal treatment of [Fe3(im)6(Him)2], which yields Fe(im)2 upon loss of the neutral imidazole molecules. Different crystalline phase transformations are observed upon further heating, until the material melts at 482 degrees C. Vitrification upon cooling of the liquid phase gives rise to the first Fe-metal-organic framework glass. X-ray total scattering experiments show that the tetrahedral environment of the crystalline solids is maintained in the glass, whereas nanoindentation measurements reveal an increase in Young's modulus, in agreement with stiffening upon vitrification., The work has been supported by the European Union (ERC- 2016-CoG 724681-S-CAGE), grant PID2020-117177GB-I00, Maria de Maeztu and Severo Ochoa Centre of Excellence Programmes CEX2019-000919-M and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033 , and the Generalitat Valenciana (PROMETEO programme) . L.L.-A . and I.B.-A. thank MICINN for pre-doctoral fellowships (PRE2019-089295 and FPU 18/0042) , respectively. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (project MAF/2022/31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Effect of Fractal Contact Lenses on Peripheral Refraction in Myopic Model Eyes

  • Rodríguez Vallejo, Manuel
  • Benlloch Fornés, Josefa Isabel
  • Pons Martí, Amparo
  • Furlan, Walter Daniel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
Purpose: To test multizone contact lenses in model eyes: Fractal Contact Lenses (FCLs), designed to induce myopic peripheral refractive error (PRE). Methods: Zemax ray-tracing software was employed to simulate myopic and accommodation-dependent model eyes fitted with FCLs. PRE, defined in terms of mean sphere M and 90–180 astigmatism J180, was computed at different peripheral positions, ranging from 0 to 35 in steps of 5, and for different pupil diameters (PDs). Simulated visual performance and changes in the PRE were also analyzed for contact lens decentration and model eye accommodation. For comparison purposes, the same simulations were performed with another commercially available contact lens designed for the same intended use: the Dual Focus (DF). Results: PRE was greater with FCL than with DF when both designs were tested for a 3.5 mm PD, and with and without decentration of the lenses. However, PRE depended on PD with both multizone lenses, with a remarkable reduction of the myopic relative effect for a PD of 5.5 mm. The myopic PRE with contact lenses decreased as the myopic refractive error increased, but this could be compensated by increasing the power of treatment zones. A peripheral myopic shift was also induced by the FCLs in the accommodated model eye. In regard to visual performance, a myopia under-correction with reference to the circle of least confusion was obtained in all cases for a 5.5 mm PD. The ghost images, generated by treatment zones of FCL, were dimmer than the ones produced with DF lens of the same power. Conclusions: FCLs produce a peripheral myopic defocus without compromising central vision in photopic conditions. FCLs have several design parameters that can be varied to obtain optimum results: lens diameter, number of zones, addition and asphericity; resulting in a very promising customized lens for the treatment of myopia progression., This research was supported by the Ministerio de Economia y Competitividad (grant FIS2011-23175), the Generalitat Valenciana (grant PROMETEO2009-077) and the Universitat Politecnica de Valencia (grant INNOVA SP20120569), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic behavior of ITQ-13 zeolite in benzene and toluene ethylation

  • Portilla Ovejero, Mª Teresa
  • Llopis, Francisco J.
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez, Cristina|||0000-0002-4415-084X
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] The ITQ-13 zeolite (ITH) presents a three-dimensional channel system formed by channels delimited by rings of 9 and 10 tetrahedra (9MR and 10MR). This material has been studied as a catalyst in reactions of interest in the petrochemical industry, which are carried out on a commercial scale in the presence of medium-pore zeolites, such as the alkylation of benzene or toluene with ethylene or ethanol. Due to its acidic properties and its particular topology, zeolite ITQ-13 presents a comparable activity to that of ZSM-5 or MCM-22, employed at commercial scale, but also higher selectivity to the main alkylation products and lower deactivation rate. The large cavities located at the intersections between the 9MR and 10MR channels, capable of hosting larger reaction intermediates than ZSM-5, and the greater activity of its external surface, could be responsible for the improved catalytic behavior of ITQ-13., Financial support by the Spanish Ministry of Science and Innovation is gratefully acknowledged (CEX2021-001230-S, PID2021-1227550B-I00 and PID2022-136934OB-100 grants funded by MCIN/AEI/10.13039/501100011033; and TED2021-130191B-C41 grant funded by the European Union NextGenerationEU/PRTR) . The authors thank also the financial support of the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34 and Prometeo 2021/077) . Finally, the authors acknowledge the Electron Microscopy Service of the Universitat Politecnica de Valencia (UPV) for assistance in electron microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social Commitment at Higher Education Institutions: Analysis of Their Strategic Plans

  • GARCIA ARACIL, ADELA|||0000-0002-9745-0563
  • Isusi-Fagoaga, Rosa
  • Monteiro, Silvia
  • Almeida, Leandro
[EN] The social contribution of higher education institutions (HEIs) tends to be constrained as a description of HEI activities in terms of outcomes, but no examination of how HEIs face societal problems through collaborative activities has been addressed. One way to explore social strategy pursued by HEIs is through the analysis of their strategic plans. We analyze the strategic plans of public HEIs in Portugal and Spain due to their similarities after the 2008 international financial crisis, which led to a major recession and gave rise to social actions to address societal problems. In doing so, we propose a framework that could guide future research in providing empirical evidence on the formulation, articulation, and implementation of social issues in institutional strategic plans. We interviewed HEI representatives to confirm some of our findings, highlighting several factors that enhance or suppress the attainment of social issues. Our research shows that HEI responses to social commitment differ according to each institution¿s regulations and social circumstances. We aspire to encourage management scholars to engage in tackling social strategy through their collaborative activities., This research was funded in part by the National R & D Program of the Spanish Ministry of Science, Innovation and Universities, grant number RTI2018-101722-B-I00 Spanish Universities Involvement in Social Innovation Activities (SUISIA). This research was also financially supported by National funds through the Portuguese Foundation for Science and Technology (FCT), within the projects UIDB/01661/2020 and UIDP/01661/2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Healing double vacancy defects on graphene: reconstruction by C-2 adsorption

  • Alamdari, Parisa
  • Sharif, Farhad
  • Mazinani, Saeedeh
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Graphene has emerged as an exciting material because of its widespread applications resulting from its unique properties. Nano-scale engineering of graphene's structure is one of the most active research areas aimed at introducing functionalities to improve the performance or endow the graphene lattice with novel properties. In this regard, conversion between the hexagon and non-hexagon rings becomes an exciting tool to tune the electronic structure of graphene due to the distinct electronic structure and functionalities induced in graphene by each type of ring. This Density Functional Theory (DFT) study is an in-depth look at the adsorption-induced conversion of pentagon-octagon-pentagon rings to hexagon rings, and systematically investigates the possibility of the conversion of pentagon-octagon-pentagon rings to pentagon-heptagon pair rings. Moreover, the bottlenecks for these atomic-level conversions in the lattice structure of graphene and the influence of heteroatom doping on the mechanisms of these transformations are established., PA, FS and SM thank the Iranian Ministry of Science, Research and Technology (MSRT) for funding. GS thanks Generalitat Valenciana (PROMETEO/2021/077) for financial support. PA and GS thank ASIC-UPV for the use of computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Diseño de materiales multifuncionales basados en Ag y/o Re para el desarrollo de metodologías hidrogenativas de imidas cíclicas para la obtención de lactamas

  • Lluna Galán, Carles
[ES] La presente tesis doctoral, se ha centrado principalmente en el diseño racional, síntesis, caracterización y evaluación catalítica de nanomateriales mono- y bimetálicos multifuncionales, con la estructura adecuada para promover de manera eficiente procesos de activación hidrogenativa de imidas cíclicas para obtener un gran número de lactamas, estructuras altamente interesantes en campos tan diversos como la industria farmacéutica o el desarrollo de polímeros. Por un lado, se ha desarrollado un nanomaterial bimetálico [AgRe/Al2O3], que ha mostrado una alta eficiencia, robustez y reusabilidad para promover la hidrodesoxigenación de imidas cíclicas. Mediante el uso de técnicas de vanguardia de caracterización de superficies sólidas se ha podido manifestar que la formación de una fase mixta AgReO4 no ha sido inocente para lograr las mejores propiedades catalíticas. La gran aplicabilidad del protocolo sintético se ha demostrado con la obtención de más de 60 compuestos de interés, partiendo de una gran variedad de imidas cíclicas (simétricas y asimétricas) promovida por el sistema [AgRe/Al2O3] y generándose agua como único subproducto de reacción. Por otro lado, se ha diseñado un sistema basado en nanopartículas de Ag con un tamaño medio de 2.2 nm dispersas sobre la matriz de gamma-Al2O3, y se ha demostrado su gran eficiencia para promover la monohidrogenación de ftalimidas a omega-hidroxilactamas. La evaluación de la influencia del grado de dispersión de los nanoagregados metálicos, las propiedades ácidas de Lewis junto con todos los resultados catalíticos obtenidos, han permitido proponer que la existencia de centros activos fruto de la combinación cooperativa entre especies de Ag metálica con habilidad para adsorber y disociar H2, y especies ácidas de Lewis de Al3+ encargadas de aumentar la electrofilia del enlace (C=O) de la imida, constituye el factor fundamental para alcanzar las mejores prestaciones catalíticas del sistema.. Bajo las condiciones de reacción optimizadas, se ha conseguido acceder a más de15 omega-hidroxilactamas distintas. Finalmente, se ha desarrollado con éxito un sistema sólido tipo composite [Ag(12.5%)/Al2O3]-[HBETA] estable y reusable, resultado de la combinación física del nanomaterial [Ag/Al2O3] y una zeolita protónica con topología BEA y relación molar (Si/Al = 10.5), que muestra una excelente eficiencia para promover la funcionalización hidrogenativa one-pot de uno de los grupos carbonilo de ftalimidas generando las correspondientes isoindolinonas C3-funcionalizadas con excelentes rendimientos. En presencia de hidrógeno molecular y agentes nucleófilos de diversa naturaleza, tales como alcoholes, aminas, nitrobencenos y sustratos aromáticos, se ha podido llevar a cabo hidrogenación parcial de uno de los carbonilos de una variedad de ftalimidas seguida de la formación selectiva de un nuevo enlace C-O, C-N o C-C conduciendo a la obtención de más de 30 derivados de isoindolinona funcionalizados en posición contigua al átomo de nitrógeno. Es muy destacable el empleo por primera vez, de nitrobencenos directamente como pronucleófilos en este tipo de procesos hidrogenativos., [CA] La present tesi doctoral s'ha centrat principalment en el disseny racional, síntesi, caracterització i avaluació catalítica de nanomaterials mono- i bimetàl·lics multifuncionals, amb l'estructura adequada per promoure de manera eficient processos d'activació hidrogenativa d'imides cícliques per obtenir un gran nombre de lactames, estructures altament interessants per les propietats que presenen en camps tan diversos com la indústria farmacéutica i el desenvolupament de polímers. D'una banda, s'ha desenvolupat un nanomaterial bimetàl·lic [AgRe/Al2O3], que ha mostrat una elevada eficiència, robustesa i reutilitzabilitat per promoure la hidrodesoxigenació d'imides cícliques. Mitjançant l'ús de tècniques a l'avantguarda de la caracterització de superfícies sòlides, s'ha pogut manifestar com la formació d'una fase mixta AgReO4 no ha estat innocent per aconseguir les millors propietats catalítiques. La gran aplicabilitat del protocol sintètic s'ha demostrat amb l'obtenció de més de 60 compostos d'interès partint d'una gran varietat d'imides cíc·liques (simètriques i asimètriques) promoguda pel sistema [AgRe/Al2O3] i generant-se aigua com a únic subproducte de la reacció. D'altra banda, s'ha dissenyat un sistema basat en nanopartícules d'Ag amb una mida mitjana de 2.2 nm disperses sobre la matriu de gamma-Al2O3, i s'ha demostrat la seua gran eficiència per promoure la monohidrogenació de ftalimides a omega-hidroxilactames. L'avaluació de la influència del grau de dispersió dels nanoagregats metàl·lics, les propietats àcides de Lewis juntament amb tots els resultats catalítics obtinguts, han permès proposar que l'existència de centres actius com a combinació cooperativa entre espècies d'Ag metàl·lica amb habilitat per adsorbir i dissociar H2, i espècies àcides de Lewis d'Al3+ encarregades d'augmentar l'electrofília de l'enllaç (C=O) de la imida, constitueix el factor fonamental per aconseguir les millors prestacions catalítiques del sistema emprat. Sota les condicions de reacció optimitzades, s'ha aconseguit accedir a més de 15 omega-hidroxilactames diferents. Finalment, s'ha desenvolupat amb èxit un sistema sòlid tipus composite [Ag(12.5%)/Al2O3]-[HBETA] estable i reutilitzable, resultat de la combinació física del nanomaterial [Ag/Al2O3] i una zeolita protònica amb topologia BEA i relació molar (Si/Al = 10.5), que ha mostrat una excel·lent eficiència per promoure la funcionalització hidrogenativa one-pot d'un dels grups carbonil de la ftalimida generant les corresponents isoindolinones C3-funcionalitzades amb excel·lents rendiments. En presència d'hidrogen molecular i nucleòfils de diversa naturalesa, com ara alcohols, amines, nitrobenzens i substrats aromàtics, s'ha pogut dur a terme la hidrogenació parcial d'un dels carbonils d'una varietat de ftalimides seguida de la formació selectiva d'un nou enllaç C-O, C-N o C-C, conduint a l'obtenció de més de 30 derivats d'isoindolinona funcionalitzats en posició contigua a l'àtom de nitrogen. És molt destacable l'ús per primera vegada, de nitrobenzens directament com a pronucleòfils en aquest tipus de processos hidrogenatius., [EN] The present doctoral thesis has primarily focused on the rational design, synthesis, characterization, and catalytic evaluation of multifunctional mono- and bimetallic nanomaterials, with the appropriate structure to efficiently promote hydrogenative activation processes of cyclic imides to obtain a large number of lactams, highly interesting structures in the development of new drugs and polimers. On the one hand, a bimetallic nanomaterial [AgRe/Al2O3] has been developed, which has shown high efficiency, robustness, and reusability to promote the hydrodeoxygenation of cyclic imides. By using advanced techniques for characterizing solid surfaces, it has been demonstrated that the formation of a mixed AgReO4 phase has been crucial in achieving the best catalytic properties. The wide applicability of the synthetic protocol has been shown with the production of more than 60 compounds of interest from a wide variety of cyclic imides (symmetric and asymmetric), promoted by the [AgRe/Al2O3] system and with water as the only byproduct of the reaction. On the other hand, a system based on Ag nanoparticles with an average size of 2.2 nm dispersed on the gamma-Al2O3 matrix has been designed, and its great efficiency in promoting the monohydrogenation of phthalimides to omega-hydroxylactams has been demonstrated. Evaluating the influence of the dispersion degree of the metal nanoaggregates, the Lewis acidic properties along with all the catalytic results obtained has allowed proposing that the existence of active centers resulting from the cooperative combination between metallic Ag species with the ability to adsorb and dissociate H2, and Lewis acidic Al3+ species responsible for increasing the electrophilicity of the imide (C=O) bond, constitutes the fundamental factor for achieving the best catalytic performance of the employed system. Under optimized reaction conditions, it has been possible to access more than 15 different omega-hydroxylactams. Finally, a stable and reusable composite solid [Ag(12.5%)/Al2O3]-[HBETA] system has been successfully developed, resulting from the physical combination of the nanomaterial [Ag/Al2O3] and a protonic zeolite with BEA topology and molar ratio (Si/Al = 10.5) as an additive. This material shows excellent efficiency in promoting the one-pot hydrogenative functionalization of one of the carbonyl groups of the phthalimide, generating the corresponding C3-functionalized isoindolinones with excellent yields. In the presence of molecular hydrogen and diverse nucleophilic agents, such as alcohols, amines, nitrobenzenes, and aromatic substrates, it has been possible to carry out partial hydrogenation of one of the carbonyls of a variety of phthalimides followed by the selective formation of a new C-O, C-N, or C-C bond leading to the production of more than 30 isoindolinone derivatives functionalized in the position adjacent to the nitrogen atom. Notably, nitrobenzenes have been used directly as pronucleophiles in this type of hydrogenative process for the first time., El meu agraïment a les entitats que hi han finançat el desenvolupament d’esta tesi doctoral, com les subvencions a l’excel·lència científica de júniors investigadors (SEJI/2019/006 i SEJI/2020/013) i el programa Prometeo (PROMETEO/2021/077) de la Generalitat Valenciana. També al programa Retos I+D+I del Ministeri de Ciència, Innovació i Universitats (PID2019-109656RA-I0/AEI/10.13039/501100011033) i al projecte Repsol
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Imaging Properties of Kinoform Fibonacci Lenses

  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Calatayud Calatayud, Arnau
  • Andrés, P.
  • Torroba, Roberto
  • Furlan, Walter Daniel
In this paper, we present a new kind of bifocal kinoform lenses in which the phase distribution is based on the Fibonacci sequence. The focusing properties of these DOEs coined Kinoform Fibonacci lenses (KFLs) are analytically studied and compared with binaryphase Fibonacci lenses (FLs). It is shown that, under monochromatic illumination, a KFL drives most of the incoming light into two single foci, improving in this way the efficiency of the FLs. We have also implemented these lenses with a spatial light modulator. The first images obtained with this type of lenses are presented and evaluated., This work was supported in part by the Ministerio de Economia y Competitividad under Grant FIS2011-23175, by Generalitat Valenciana under Grant PROMETEO2009-077, by the Universitat Politecnica de Valencia under Grant INNOVA SP20120569. The work of R. Torroba was supported in part by CONICET under Grants 0863/09 and 0549/12 and in part by Facultad de Ingenieria, Universidad Nacional de La Plata under Grant 11/I168.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Effect of using rCUDA to Provide CUDA Acceleration to Xen Virtual Machines

  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
  • Reaño González, Carlos
[EN] Nowadays, many data centers use virtual machines (VMs) in order to achieve a more efficient use of hardware resources. The use of VMs provides a reduction in equipment and maintenance expenses as well as a lower electricity consumption. Nevertheless, current virtualization solutions, such as Xen, do not easily provide graphics processing units (GPUs) to applications running in the virtualized domain with the flexibility usually required in data centers (i.e., managing virtual GPU instances and concurrently sharing them among several VMs). Therefore, the execution of GPU-accelerated applications within VMs is hindered by this lack of flexibility. In this regard, remote GPU virtualization solutions may address this concern. In this paper we analyze the use of the remote GPU virtualization mechanism to accelerate scientific applications running inside Xen VMs. We conduct our study with six different applications, namely CUDA-MEME, CUDASW++, GPU-BLAST, LAMMPS, a triangle count application, referred to as TRICO, and a synthetic benchmark used to emulate different application behaviors. Our experiments show that the use of remote GPU virtualization is a feasible approach to address the current concerns of sharing GPUs among several VMs, featuring a very low overhead if an InfiniBand fabric is already present in the cluster., This work was funded by the Generalitat Valenciana under Grant PROMETEO/2017/077. Authors are also grateful for the generous support provided by Mellanox Technologies Inc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

The use of podcasting for a hybrid flipped classroom

  • Marco-Detchart, Cédric
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Jordán, Jaume|||0000-0003-0400-9136
[EN] We are currently assisting a social paradigm change motivated by the incorporation, more and more accelerated, of new information technologies (e.g., social networks or content platforms) in our day-today life. The increased availability of online resources in a universal, diverse, and permanent way is modifying how we consume online information and content. This is especially true when it comes to children and teenagers. New generations are increasingly adapting to immediacy and communication through information technologies. Therefore, it is necessary to evolve the educational paradigm to adapt it to this new social reality. Future learning strategies should consider the latest models of social communication, adapting them to achieve learning objectives from the perspective of constructive alignment and the acquisition or improvement of transversal competencies. In this sense, there are currently several technologies that can be incorporated into the classroom. One of the emerging technologies is the podcast. Usually used for entertainment (e.g., stories, books, or radio talks), the podcast is becoming a tool for massive online content distribution. There exist many advantages to using podcasting for an educative purpose, as the production cost (in terms of time) is lower than recording a video. From a content consumer perspective, the main advantage is that an audio-only approach can be used/consumed everywhere and more easily than video media. Some educational podcasts are available online but generally tend to focus on learning languages or history. Outside these specific topics, their use in technology subjects is still residual and mainly focuses on interviews or long expositions. Moreover, in current proposals, the teacher is the one who produces the podcast, and therefore it is a one-way communication model (from the teacher to the students). On the other hand, one of the teaching innovation models that is being increasingly used is the flipped classroom. In the flipped classroom, students are the main protagonists in their learning. They must prepare the theoretical parts on their own, and the teacher serves as a guide during this learning process. In this paper, we propose using the podcast in the flipped classroom model, turning the podcast into a bidirectional tool in which students are both producers and receivers of learning. The proposal consists of dividing the class into small groups of students (2-4). Each group will record a podcast episode on a different conceptual part of the lesson. Group members will have to coordinate and share the activities of recording and searching for content for the podcast. This will encourage transversal skills related to communication and social skills. These podcasts will then be shared with the rest of the groups so that everyone can have direct and permanent access to the different sections of the lesson. Creativity will also be encouraged, allowing students to add the music or sound effects they consider necessary to enhance the explanation., The authors gratefully acknowledge the financial support of Consellería d'Innovació, Universitats, Ciencia i Societat Digital from Comunitat Valenciana and the European Social Fund (Investing In Your Future) (APOSTD/2021/227 and CIPROM/2021/077), the Spanish Ministry of Science (project PID2021-123673OB-C31) and the Research Services of Universitat Politècnica de València. Jaume Jordán is supported by grant IJC2020-045683-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Evaluating the use of self-video teaching in a flipped classroom

  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Jordán, Jaume|||0000-0003-0400-9136
  • Vos, Tanja Ernestina|||0000-0002-6003-9113
  • Marco-Detchart, Cédric
[EN] New generations are increasingly becoming more familiar with consuming audio-visual material through online platforms. Consequently, learning through IT-based tools is becoming more and more common. Nowadays, learning platforms (e.g., edX or W3Schools) or content platforms (e.g., YouTube) containing vast amounts of courses and video tutorials are becoming increasingly popular among students. The main advantage of online learning is that students can access the content from anywhere and whenever they want, being able to revisit the content to review concepts and improve their level of knowledge. In this way, learning based on a deep approach and self-learning is promoted since students are the ones who regulate their learning process by deciding how much time to dedicate and when to do it. Appropriately using this type of resource can become a very effective tool applied to a flipped classroom model. In the flipped classroom model, students are active learners since they are in charge of developing the lesson material both in class and at home. In this type of learning, the teacher assumes the role of guide assisting during the learning process. A standard methodology in this flipped classroom model consists of students preparing different parts of the course content and then explaining those parts to their classmates. In this way, students develop a sense of responsibility toward the rest of their classmates, creating an environment where they can recognise their shortcomings and take control of their learning to teach others. In addition, the acquisition of transversal communication skills is encouraged. With all this in mind, in this article, we describe a case study we are currently carrying out with students enrolled in the programming course at the Universitat Politècnica de València. Our proposal combines the flipped classroom model with access to online resources. In this first approach, we have proposed that the students record a video explaining a part of the lesson or how to solve at least two exercises step by step. The explanation must be done as if they were content creators, and their audience were beginner programmers. The students will upload the videos to a private YouTube channel that will only be accessible to their classmates. In the classroom, the teacher will encourage students to share their stories and experiences while learning, editing, and recording the videos. This proposal's main objective is to promote students' engagement in the learning process and offer them learning alternatives through online content with a closer language that they can access whenever they need it. To motivate participation, students and teachers will choose the three best videos from all the videos. The three winners will receive extra points in the evaluation of the course., The authors gratefully acknowledge the financial support of Consellería d'Innovació, Universitats, Ciencia i Societat Digital from Comunitat Valenciana and the European Social Fund (Investing In Your Future) (APOSTD/2021/227 and CIPROM/2021/077), the Spanish Ministry of Science (project PID2021-123673OB-C31) and the Research Services of Universitat Politècnica de València. Jaume Jordán is supported by grant IJC2020-045683-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the Context-Sensitive Dependency Graph

  • Alarcón, Beatriz
  • Gutiérrez Gil, Raúl|||0000-0002-3984-2868
  • Lucas Alba, Salvador|||0000-0001-9923-2108
[EN] The dependency pairs method is one of the most powerful technique for proving termination of rewriting and it is currently central in most automatic termination provers. Recently, it has been adapted to be used in proofs of termination of context-sensitive rewriting. The use of collapsing dependency pairs i.e., having a single variable in the right-hand side is a novel and essential feature to obtain a correct framework in this setting. Unfortunately, dependency pairs behave as a kind of glue in the context-sensitive dependency graph which makes the cycles bigger, thus making some proofs of termination harder. In this paper we show that this effect can be safely mitigated by removing some arcs from the graph, thus leading to faster and easier proofs. Narrowing dependency pairs is also introduced and used here to eventually simplify the treatment of the context-sensitive dependency graph. We show the practicality of the new techniques with some benchmarks., This work has been partially supported by the EU (FEDER) and the Spanish MEC, under grants TIN2004-7943-C04-02 and HA 2006-0007, the Generalitat Valenciana under grant GV06/285, and the ICT for EU-India Cross-Cultural Dissemination ALA/95/23/2003/077-054 project. Beatriz Alarc¿on was partially supported by the Spanish MEC under FPU grant AP2005-3399.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

NLAS-multi: A multilingual corpus of automatically generated Natural Language Argumentation Schemes

  • Ruiz-Dolz, Ramon
  • Lawrence, John
  • Reed, Chris
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
[EN] Some of the major limitations identified in the areas of argument mining, argument generation, and natural language argument analysis are related to the complexity of annotating argumentatively rich data, the limited size of these corpora, and the constraints that represent the different languages and domains in which these data is annotated. To address these limitations, in this paper we present the following two contributions: an effective methodology for the automatic generation of natural language arguments in different topics and languages, and the largest publicly available corpus of Natural Language Argumentation Schemes available to date., Work partially supported by Generalitat Valenciana CIPROM/2021/077, Spanish Government projects PID2020-113416RB-I0 0 and TED2021-131295B-C32 ; TAILOR project funded by EU Hori-zon 2020 under GA No 952215. This work was also partially supported by the 'AI for Citizen Intelligence Coaching against Disinformation (TITAN) ' project, funded by the EU Horizon 2020 Research and Innovation Programme under Grant Agreement 101070658 , and by UK Research and Innovation under the UK Governments Horizon funding guarantee Grant No's. 10040483 and 10055990.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Separation of biobutanol from synthetic fermentation mixtures using unidirectional small pore pure silica zeolites

  • Pérez-Botella, Eduardo
  • Claessens, Benjamin
  • Denayer, Joeri F.M.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The adsorptive vapour phase separation of 1-butanol from a synthetic ABE (acetone, 1-butanol, ethanol) mixture has been studied for the first time on a set of unidirectional small pore pure silica zeolites with ITW, MTF, RTH and STT structures with different pore size and topology. With this systematic approach, we provide insight into the structural and surface properties that can improve the vapour phase recovery of biobutanol. The influence of operation parameters, such as the temperature (40-80 degrees C), the total flow, and presence/absence of humidity and CO2 have been studied. For this application, adsorbents need to possess pore openings with one of their di-mensions larger than 4.1 angstrom and cavities with diameters above 7 angstrom. Si-STT zeolite presents a remarkable selec-tivity towards 1-butanol, which is not affected by the presence of water or CO2 in the mixture or by an increase in the temperature. Si-STT results an excellent and robust adsorbent for this separation at conditions close to those of the headspace of the ABE fermenter, achieving purities of 90-93% at recoveries between 90 and 96%., The authors want to thank the Spanish Ministry of Science and Innovation and the Spanish Agency of Research for their funding via Project RTI2018-101784-B-I00. The Generalitat Valenciana, Conselleria d'Innovacio, Universitats, Ciencia y Societat Digital is acknowledged for their funding via project Prometeo/2021/077. EP-B acknowledges the Spanish Ministry of Education and Professional Training for the grant FPU15/01602 and the additional funding for the stay EST18/00213. Thanks to Gino V. Baron for measuring and analysing the Ar isotherms on the Si-RTH material. Very special thanks to Miguel Palomino for measuring the vapour isotherms on BelSorp Max II at the ITQ. The Mi-croscopy Service of the UPV is acknowledged for their help in sample characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

New Contributions Towards Meal and Exercise Announcement-Free Artificial Pancreas Systems

  • Sala-Mira, Iván|||0000-0002-6228-5190
[ES] Las infusiones exógenas de insulina son vitales para las personas con diabetes tipo 1 para suplir parcialmente la incapacidad del páncreas de secretar insulina. Sin embargo, las terapias intensivas actuales pueden restringir la calidad de vida de los pacientes. Los pacientes con esta enfermedad tienen que tomar decisiones constantemente sobre las dosis de insulina que lleva a la glucosa a niveles seguros. Si no lo consiguen, pueden sufrir las complicaciones crónicas y agudas derivadas de los niveles anormalmente altos o bajos de glucosa. La regulación automática de glucosa con sistemas de páncreas artificial prometía reducir la carga del autocontrol de la enfermedad al mismo tiempo que se mejoraba el tiempo en normoglucemia y se reducía la variabilidad. Sin embargo, estas promesas sólo se han cumplido parcialmente. Aunque esta tecnología mejora el control glucémico que logran las terapias tradicionales, la ingesta de alimentos y la práctica de ejercicio limitan la eficiencia de los sistemas de páncreas artificial durante el día. De hecho, los sistemas comerciales sólo pueden hacerles frente con la ayuda de los pacientes. Para compensar las ingestas, los pacientes deben anunciar el contenido de carbohidratos al sistema. Para el ejercicio, deben anunciar el inicio de la actividad o tomar medidas preventivas como modificar la referencia de glucosa o reducir la basal con mucha antelación. Estas exigencias no sólo no ayudan a reducir la carga del paciente, sino que pueden comprometer la eficiencia del sistema cuando el paciente se equivoca al estimar los carbohidratos, omite el anuncio de la comida o no puede planificar el ejercicio. Así pues, esta tesis propone nuevos métodos para eliminar el anuncio de ingestas y ejercicio lo que ayudaría a reducir la intervención del paciente en los sistemas de páncreas artificial, y, en consecuencia, mejorar la calidad de vida. Desde un punto de vista de control, las ingestas y el ejercicio pueden considerarse perturbaciones. Esta tesis explota métodos de la literatura de rechazo de perturbaciones y acomodación de fallos para lograr el objetivo de la tesis. En concreto, hay que destacar tres aplicaciones: 1) se ha desarrollado un observador super-twisting para detectar comidas no anunciadas como primer paso para su compensación; 2) se ha diseñado un observador de modos deslizantes de primer orden para la estimación de la ratio de aparición de glucosa, la cual ha sido integrada en un generador de bolos para compensar las comidas; 3) se ha empleado el principio de diseño por modelo interno para mitigar el efecto de las ingestas de alimentos y ejercicio, añadiendo sugerencias de carbohidratos de rescate a la insulina. Como resultado, las contribuciones de esta tesis allanan el camino para el desarrollo de sistemas de páncreas artificial sin anuncios, que liberen al paciente de la carga de la gestión de la diabetes., [CA] Les infusions exògenes d'insulina són vitals per a les persones amb diabetis tipus 1 per a suplir parcialment l'incapacitat del pàncrees de secretar insulina. No obstant, les teràpies intensives actuals poden restringir la qualitat de vida dels pacients. Les persones amb aquesta malaltia han de prendre decisions contínuament sobre la dosi d'insulina que fa que la glucosa estiga en valors segurs. Si no ho aconsegueixen, poden sofrir les complicacions cròniques i agudes derivades dels nivells anormalment alts o baixos de glucosa. La regulació automàtica de glucosa amb sistemes de pàncrees artificials prometia reduir la càrrega d'autocontrol de la malaltia al mateix temps que es millorava el temps en normoglucèmia i es reduïa la variabilitat. No obstant, aquestes promeses s'han complit només parcialment. Encara que aquesta tecnologia millora el control de la glucosa, la ingesta d'aliments i la pràctica d'exercici limiten l'eficiència dels sistemes de pàncrees artificials durant el dia. De fet, els sistemes comercials només poden fer-les front amb la ajuda dels pacients. Per a compensar les ingestes, el pacients han d'anunciar al sistema la quantitat de carbohidrats. Per al exercici, han d'anunciar l'inici de l'activitat o prendre mesures preventives com modificar la referència de glucosa o reduir la infusió basal d'insulina. Aquestes exigències no només no ajuden a reduir la càrrega al pacient, sinó que poden comprometre l'eficiència del sistema quan el pacient confon la estimació dels carbohidrats, omet l'anunciament de la ingesta o no pot planificar l'exercici. Així doncs, aquesta tesi proposa nous mètodes per a eliminar l'anunciament d'ingestes i exercici permetent reduir així la intervenció del pacient, i, en conseqüència, millorar la qualitat de vida. Des del punt de vista de control, les ingestes i el exercici poden considerar-se pertorbacions. Aquesta tesi explota mètodes de la literatura de rebuig de pertorbacions i acomodament de fallades. En particular, es destaquen tres aplicacions: 1) s'ha desenvolupat un observador super-twisting per a detectar ingestes no anunciades com a primer pas per a la seua compensació; 2) se ha dissenyat un observador de modes lliscants per a estimar el rati d'aparició de glucosa de la ingesta, el qual s'ha integrat en un generador de bols d'insulina per compensar les ingestes; 3) se ha empleat el principi de disseny per model intern per a mitigar l'efecte de les ingestes i exercici, incorporant recomanacions de carbohidrats a la insulina. Com a resultat, les contribucions d'aquesta tesi obren el camí per a desenvolupar sistemes de pàncrees artificial sense anunciaments, que alliberen al pacient de la càrrega de la gestió de la diabetis., [EN] Exogenous insulin infusions are vital for people with type 1 diabetes to partially make up for the inability of the pancreas to secrete insulin. However, current intensive therapies may restrict patients' quality of life. People with this disease have to constantly make decisions about insulin doses to bring glucose levels to a safe range. If unsuccessful, they may suffer from chronic and acute complications related to abnormally high and low glucose values. The automatic regulation of glucose with artificial pancreas systems promised to reduce patients' self-control burdens while improving time in normoglycemia and decreasing variability. However, these promises are fulfilled only partially. Although this technology outperforms the glycemic outcomes achieved by conventional therapies, meal intake and physical activity limit its daytime performance. Indeed, commercially available systems only can handle them with the support of the patients. For meals, patients must announce the carbohydrate content to the system. For exercise, they must notify the activity or take preventive actions like changing glucose setpoint or decreasing basal well ahead before exercise. These demands do not help reduce the patient's burden. They even can compromise the system performance when the patient misestimates the carbohydrate content, omits the meal announcement, or cannot plan the exercise event. Hence, this thesis proposes new methods to eliminate the need for meal and exercise announcements, thus reducing patient intervention in artificial pancreas systems for a better quality of life. From a control perspective, meals and exercise can be regarded as disturbances; therefore, this thesis exploits methods from the disturbance rejection and fault accommodation literature to achieve the thesis goal. Specifically, the following three applications must be highlighted: 1) a super-twisting-based residual generator has been developed to detect unannounced meals as the first step to their compensations; 2) a sliding-mode disturbance observer has been designed to estimate the glucose meal appearance, which is fed into a bolusing algorithm to compensate the meals; 3) the internal model principle is employed to mitigate the effects of meal intakes and exercise, supplementing insulin infusions with carbohydrate recommendations. As a result, the contributions of this thesis pave the way for the development of announcement-free artificial pancreas systems, releasing patients from the burden of diabetes management., This work was partially supported by: grant DPI2016-78831-C2-1-R funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”; grant PID2019-107722RB-C21 funded by MCIN/AEI/10.13039/501100011033; and grant ACIF/2017/021 funded by the Generalitat Valenciana through European Social Funds (FSE). Also, the grant BEFPI/2019/077, funded by the Generalitat Valenciana through FSE funds, supported a 7-month research stay at Physiological da University (Óbudai Egyetem, Óbuda, Budapest, Hungary)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ophthalmic: Laboratorio virtual para el diseño de nuevas lentes oftálmicas multifocales

  • Calatayud, Arnau
  • Remón, Laura
  • Monsoriu, Juan A.
  • Giménez, Fernado
  • Furlan, Walter D.
[EN] This work presents a new virtual laboratory, OPHTALMIC, developed with MATLAB GUI for using in Optics and Optometry courses as a computer tool for studying the focusing properties of multifocal diffractive both on unconventional structures both periodic and aperiodic. This virtual laboratory enables students to quickly and easily analyze the influence of the different parameters of construction and find the best solution for a user., [ES] En este trabajo presentamos un nuevo laboratorio virtual, OPHTALMIC, desarrollado en MATLAB GUI (Interfaz Gráfica de Usuario) para su uso en cursos de Óptica y Optometría como una herramienta informática para estudiar las propiedades de focalización de lentes oftálmicas multifocales basadas en estructuras no convencionales, tanto periódicas como aperiódicas. A modo de ejemplo, este laboratorio virtual permite a los estudiantes analizar rápida y fácilmente la in fluencia de los diferentes parámetros de construcción y de este modo encontrar el diseño de la lente oftálmica que más se adecue a las necesidades del usuario., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (FIS 2011-23175 y TRACE 2009-0215), por la Generalitat Valenciana (PROMETEO 2009-077) y por la Universitat Politècnica de València (PAID-05-11 y SP20120569). L.R. agradece a la Fundación CajaMurcia la concesión de un contrato predoctoral. Este trabajo ha sido desarrollado por los Grupos de Innovación Docente GCID35/2009 y MoMa de la Universitat de València y de la Universitat Politècnica de València, respectivamente.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

ITO Top-Electrodes via Industrial-Scale PLD for Efficient Buffer-Layer-Free Semitransparent Perovskite Solar Cells

  • Zanoni, Kassio P. S.
  • Paliwal, Abhyuday
  • Repecau, Pierre-Alexis
  • Morales-Masis, Monica
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] The deposition of transparent conductive oxides (TCO) usually employs harsh conditions that are frequently harmful to soft/organic underlayers. Herein, successful use of an industrial pulsed laser deposition (PLD) tool to directly deposit indium tin oxide (ITO) films on semitransparent vacuum-deposited perovskite solar cells without damage to the device stack is demonstrated. The morphological, electronic, and optical properties of the PLD deposited ITO films are optimized. A direct relation between the PLD chamber pressure and the solar cell performance is obtained. The semitransparent perovskite solar cells prepared exclusively by vacuum-assisted techniques had fill factors of 78% and exceeded 18% in power conversion efficiencies. This demonstrates that the direct deposition of TCO-based top electrodes without protective buffer layers is possible and leads to efficient devices., The research leading to these results has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant agreement No. 834431). The authors acknowledged support from the Comunitat Valenciana (IDIFEDER/2018/061 and PROMETEU/2020/077), as well as by the Ministry of Science and Innovation (MCIN), and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033, and the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR-2019-CRG8-4093.2). K.P.S.Z. acknowledged funding from Comunitat Valenciana (APOSTD/2021/368). AP acknowledged his Grisolia grant from the Comunitat Valenciana (GRISOLIAP/2020/134). P-A.R. and M.M.M. acknowledged the financial support from the Netherlands Enterprise Agency under contract SOL18001 of the SOLAR ERA NET CUSTCO project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic hydrogenation of Cl-oxyanion pollutants in water

  • Plá-Hernandez, Adrián
  • Cerrillo, José Luis
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Pt and Pd catalysts supported on alumina have been tested and characterised for the catalytic hydrogenation of chlorates at room temperature and atmospheric pressure. Metallic nanoparticles are the catalytic active species, obtaining better results with the Pt than with the Pd catalysts. It is observed that the activity of the Pt catalysts depends on the metal precursor used for their preparation and the calcination temperature as these factors lead to different platinum dispersion on the alumina surface. The best results were obtained with the catalysts prepared from metal precursors containing Cl atoms and calcined at lower temperatures, as smaller metallic crystallites are formed. The chlorate reduction profiles displayed a pseudo-first order kinetic towards chlorate. The optimised catalyst was tested for the reduction of the different Cl-oxyanions, proving that the reaction rate depends on the chlorine valence of the ion following this order: ClO4- < ClO3- < ClO2- . This is due to the different molecular geometry of the anions that results in different stability of the ClOx -. The optimised catalyst was fully stable in successive uses, being active for the simultaneous reduction of chlorate, chlorite and bromate in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. Finally, we thank Raphael Scherbauer and Josephine Goethals for collaborating on the catalytic experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crystalline phase transition in as-synthesized pure silica zeolite RTH containing tetra-alkyl phosphonium as organic structure directing agent

  • Martinez-Ortigosa, Joaquin
  • Simancas, Jorge
  • Hernández-Rodríguez, Manuel
  • Martineau-Corcos, Charlotte
  • Sarou-Kanian, Vincent
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Vidal Moya, José Alejandro
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The choice of structure directing agents (SDAs) in zeolite synthesis significantly impacts the arrangement of active sites, thereby influencing the stabilization of reaction intermediates with profound implications for catalytic applications. Therefore, understanding the distribution of SDAs along with the substitution of heteroatoms for silicon in zeolites is imperative for tailoring optimized materials for specific applications. This study is centered on the synthesis of all-silica RTH type zeolites in the presence of fluoride, utilizing triisopropyl(methyl)phosphonium as the organic SDA (OSDA). Zeolites produced under varying conditions of time and temperature exhibit differences in their X-ray diffractograms, indicating the presence of two distinct crystalline phases. The 19F NMR spectra confirm the presence of fluoride within the small rth cage and exhibit two distinct signals depending on the sample. The 29Si NMR spectra reveal the existence of penta-coordinated F-SiO4 species, resulting in sixteen non-equivalent Si sites. Through ab initio DFT methods, the stabilization energy and 29Si chemical shielding of several models featuring F-SiO4 situated at all crystallographic sites were computed. Comparison with experimental results enabled the identification of the framework position where the five-coordinate silicon is located, which differs between the two crystalline phases of the as-synthesized RTH zeolites. Consequently, the placement of fluoride in either of these two sites within the RTH zeolite can be controlled during the synthesis. It is expected that this methodology can be extended to manipulate the position of trivalent atoms (e.g., Al3+ or B3+), which can affect the catalytic properties of the RTH zeolite., Financial support by the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" (Projects: CEX2021-001230-S, PID2022-136934OB-I00, PID2020-112590GB-C21) is deeply acknowledged. The authors also thank the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and "European Union Next Generation EU/PRTR" (Projects: TED2021-130191B-C41 and TED2021-130739B-I00), Generalitat Valenciana (Project: Prometeo/2021/077) and "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR" (project: MFA/2022/047). Financial support from the IR INFRANALYTICS FR2054 for conducting the research is gratefully acknowledged. J.M-O acknowledges the financial support from the European Union - NextGeneration EU through the Universitat Politecnica de Valencia, Ministerio de Universidades, Plan de Recuperacion, Transformacion y Resiliencia for the Margarita Salas grant. The authors thankfully acknowledge the Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) for computational resources and technical support. The authors acknowledge the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization and beamline MSPD at synchrotron ALBA for beamtime allocation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

GPU-Job Migration: The rCUDA Case

  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
[EN] Virtualization techniques have been shown to report benefits to data centers and other computing facilities. In this regard, not only virtual machines allow to reduce the size of the computing infrastructure while increasing overall resource utilization, but also virtualizing individual components of computers may provide significant benefits. This is the case, for instance, for the remote GPU virtualization technique, implemented in several frameworks during the recent years. The large degree of flexibility provided by the remote GPU virtualization technique can be further increased by applying the migration mechanism to it, so that the GPU part of applications can be live-migrated to another GPU elsewhere in the cluster during execution time in a transparent way. In this paper we present the implementation of the migration mechanism within the rCUDA remote GPU virtualization middleware. Furthermore, we present a thorough performance analysis of the implementation of the migration mechanism within rCUDA. To that end, we leverage both synthetic and real production applications as well as three different generations of NVIDIA GPUs. Additionally, two different versions of the InfiniBand interconnect are used in this study. Several use cases are provided in order to show the extraordinary benefits that the GPU-job migration mechanism can report to data centers., This work was funded by the Generalitat Valenciana under Grant PROMETEO/2017/77. Authors are grateful for the generous support provided by Mellanox Technologies Inc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards an Affective Intelligent Agent Model for Extrinsic Emotion Regulation

  • Picó-Pascual, Aarón|||0000-0002-5612-8033
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Vivancos, Emilio|||0000-0002-0213-0234
  • Botti V.|||0000-0002-6507-2756
  • García-Fornes, A|||0000-0003-4482-8793
[EN] Emotion regulation is the human ability to modulate one¿s or other emotions to maintain emotional well-being. Despite its importance, only a few computational models have been proposed for facilitating emotion regulation. None of them prepare a plan of all the actions necessary for emotion regulation customized to the needs of a specific individual. To address this gap, we propose a computational model for an intelligent agent which, grounded in a multidimensional emotion representation, facilitates emotion regulation in individuals. This computational model is based on J. Gross¿s theoretical framework of emotion regulation. An intelligent agent selects the most appropriate regulation strategy to maintain an individual¿s emotional equilibrium considering the individual¿s personality traits. A dynamic planner prepares a plan of emotion regulation actions which is dynamically adapted according to the emotional changes observed in the individual after applying the previous emotion regulation actions. This refinement of the initial regulatory action plan allows the proposed emotion regulation agent to adapt the plan to the specific characteristics of the individual, facilitating the individual to improve their emotion regulation capabilities and improve their emotional health., This research was funded by Generalitat Valenciana CIPROM/2021/077; Spanish Government by projects PID2020-113416RB-I00 and VAE-VADEM TED2021-131295B-C32 (included in project MCIN/AEI/10.13039/501100011033) and the European Union NextGenerationEU/PRTR; and TAILOR, a project funded by EU Horizon 2020, under GA No 952215.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Different Zeolite Phases Obtained with the Same Organic Structure Directing Agent in the Presence and Absence of Aluminum: The Directing Role of Aluminum in the Synthesis of Zeolites

  • Altundal, Ömer Faruk
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • León-Rubio, Santiago
[EN] Zeolites are a large family of crystalline microporous materials with, mainly, silicate and aluminosilicate composition. Each topology can only be synthesized in a specific range of aluminum content, Al/(Si + Al), within the interval [0¿0.5], and this interval cannot, in general, be predicted for each structure. Aluminum and organic structure directing agents (OSDAs), among others, act together in obtaining the zeolite phase under each specific synthesis condition. The present study is an attempt to rationalize the role of aluminum as a structure directing agent in the synthesis of zeolites using computational chemistry and based on the criteria of energetic stability using both force field and periodic DFT methods. A proper selection of cases in which, using the same OSDA, different zeolite phases are obtained in the presence and absence of aluminum helps to rationalize how aluminum contributes to the relative stability of the different competing zeolite phases considered., We thank GVA for PROMETEO/2021/077 project as well as ASIC-UPV and SGAI-CSIC for the use of computational facilities. S.L. thanks MICINN for predoctoral grant BES-2017-081245 corresponding to project SEV-2016-0683-17-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of zeolite framework composition on the fast NH3-SCR performance of hydrothermally aged iron zeolites

  • Tan, Xuechao
  • Hong, Suk Bong
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Here we report that iron-exchanged borosilicate and gallosilicate beta zeolites when hydrothermally aged at high temperatures show a notable increase (ca. 30 and 45 %, respectively) in NOx conversion under fast SCR conditions at 150 degrees C. We also found that their lowest hydrothermal aging temperatures leading to such a conversion increase are higher by 50 degrees C and lower by 100 degrees C than the temperature (650 degrees C) of iron-exchanged aluminosilicate beta, respectively, indicating a strong influence of zeolite framework composition on the lowtemperature fast NH3-SCR activity of zeolite-supported iron catalysts. Combined experimental and theoretical characterizations provide indirect but convincing evidence for the formation of neutral heteronuclear bis-mu-oxo ironboron or irongallium dimers in the hydrothermally aged catalysts, which can effectively catalyze the reduction of ammonium nitrate, an intermediate of the NH3-SCR reaction with a decomposition temperature of ca. 180 degrees C, by NO at 150 degrees C., We acknowledge financial support from the National Creative Research Initiative Program (2021R1A3A3088711) through the National Research Foundation of Korea, EcoPro HN and GVA (PROMETEO/2021/077) , MCIN (Severo Ochoa) , ASIC-UPV and SGAI-CSIC for the use of computational facilities. We thank Pohang Accelerator Laboratory (PAL) for beam time at 10 C beamline. PAL is supported by MSIP and POSTECH.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dispersal limitation, eutrophication and propagule pressure constrain the conservation value of Grassland Green Infrastructure

  • Hooftman, Danny
  • Kimberley, Adam
  • Cousins, Sara A.O.
  • Escribano-Ávila, Gema
  • Honnay, Olivier
  • Krickl, Patricia
  • Plue, Jan
  • Poschlod, Peter
  • Traveset, Anna
  • Bullocks, James M.
Semi-natural grasslands harbour many of Europe's species of conservation interest. Although larger grasslands are the focus of most conservation activity, many grassland fragments are scattered across landscapes –in small patches or along linear elements– which can form Grassland Green Infrastructure (GGI). GGI has the potential to enhance landscape diversity by creating functioning metacommunities comprising of large semi-natural grasslands and these surrounding fragments. While often highlighted in conservation policy, little is known about the biodiversity supported by green infrastructure itself and thus its conservation potential. To address this issue, we contrasted plant communities in 36 ‘core’ grassland sites across three European countries with communities in the surrounding GGI. We related compositional differences to amount and type of GGI habitat (patches or linear), and the distances for seed dispersal by livestock from core sites. We found substantial differences between the GGI and the core sites, with a mean 54% species turn-over. These differences indicated filtering of stress tolerant species characteristic of low nutrient conditions, and semi-natural grassland specialists. Species with poorer dispersal abilities declined strongly with increasing distances from the core sites. The many additional species in the GGI, not found in the core sites, were predominantly those with a competitive strategy and high seed dispersal ability. We conclude that the biodiversity-supporting role of GGI across Europe is severely constrained by eutrophication, dispersal limitation and external propagule pressure. Actions to improve the quality of GGI might include enhancing dispersal by livestock combined with more type-diversification and less intensively used grassland habitats., This research was funded through the 2015-2016 BiodivERsA COFUND call for research proposals, with the national funders FORMAS (2016-01948), the Swedish Environmental Protection Agency (Naturvårdsverket), the Belgian Science Policy Office (BelSPo, BR/175/A1/FUNgreen), the Germany Federal Ministry of Education and Research (Bundesministerium fuer Bildung und Forschung, FKZ: 01LC1619A) and the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovación y Universidades, PCIN-2016-077). JMB was funded under UKCEH National Capability project 06895., Peer reviewed