Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Genetic characterization of the cyclohexane carboxylate degradation pathway in the denitrifying bacterium Aromatoleum sp. CIB

  • Sanz, David
  • Díaz, Eduardo
18 p.-9 fig.-1 tab., The alicyclic compound cyclohexane carboxylate (CHC) is anaerobically degraded through a peripheral pathway that converges with the central benzoyl-CoA degradation pathway of aromatic compounds in Rhodopseudomonas palustris (bad pathway) and some strictly anaerobic bacteria. Here we show that in denitrifying bacteria, e.g. Aromatoleum sp. CIB strain, CHC is degraded through a bad-ali pathway similar to that reported in R. palustris but that does not share common intermediates with the benzoyl-CoA degradation pathway (bzd pathway) of this bacterium. The bad-ali genes are also involved in the aerobic degradation of CHC in strain CIB, and orthologous bad-ali clusters have been identified in the genomes of a wide variety of bacteria. Expression of bad-ali genes in strain CIB is under control of the BadR transcriptional repressor, which was shown to recognize CHC-CoA, the first intermediate of the pathway, as effector, and whose operator region (CAAN4TTG) was conserved in bad-ali clusters from Gram-negative bacteria. The bad-ali and bzd pathways generate pimelyl-CoA and 3-hydroxypimelyl-CoA, respectively, that are metabolized through a common aab pathway whose genetic determinants form a supraoperonic clustering with the bad-ali genes. A synthetic bad-ali-aab catabolic module was engineered and it was shown to confer CHC degradation abilities to different bacterial hosts., Support was provided by grants BIO2016-79736-R, PID2019-110612RB-I00 and PCI2019-111833-2 from the Ministry of Science and Innovation of Spain; by grant CSIC 2019 20E005, and by European Union H2020 Grant 101000733. D. Sanz was the recipient of an FPU14/04356 fellowship from the Ministry of Education, Culture and Sports., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing biodesulfurization by engineering a synthetic dibenzothiophene mineralization pathway

  • Martínez, Igor
  • El-Said Mohamed, Magdy
  • García, José Luis
  • Díaz, Eduardo
A synthetic dibenzothiophene (DBT) mineralization pathway has been engineered in recombinant cells of Pseudomonas azelaica Aramco J strain for its use in biodesulfurization of thiophenic compounds and crude oil. This functional pathway consists of a combination of a recombinant 4S pathway responsible for the conversion of DBT into 2-hydroxybiphenyl (2HBP) and a 2HBP mineralization pathway that is naturally present in the parental P. azelaica Aramco J strain. This novel approach allows overcoming one of the major bottlenecks of the biodesulfurization process, i.e., the feedback inhibitory effect of 2HBP on the 4S pathway enzymes. Resting cells-based biodesulfurization assays using DBT as a sulfur source showed that the 2HBP generated from the 4S pathway is subsequently metabolized by the cell, yielding an increase of 100% in DBT removal with respect to previously optimized Pseudomonas putida biodesulfurizing strains. Moreover, the recombinant P. azelaica Aramco J strain was able to use DBT as a carbon source, representing the best characterized biocatalyst harboring a DBT mineralization pathway and constituting a suitable candidate to develop future bioremediation/bioconversion strategies for oil-contaminated sites., This work was supported by Saudi Aramco, and by grants BIO2016-79736-R, RTI2018-095584-B-C44, PID2019-110612RB-I00, and PCI2019-111833-2 from the Ministry of Science and Innovation of Spain; by grant CSIC 2019 20E005, and by European Union H2020 Grant 101000733, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing tellurite and selenite bioconversions by overexpressing a methyltransferase from Aromatoleum sp. CIB

  • Alonso-Fernandes, Elena
  • Fernández-Llamosas, Helga
  • Cano, Irene
  • Serrano-Pelejero, Cristina
  • Castro, Laura
  • Díaz, Eduardo
  • Carmona, Manuel
16 p.-8 fig.-1 tab., Pollution by metalloids, e.g., tellurite and selenite, is of serious environmental concern and, therefore, there is an increasing interest in searching for ecologically friendly solutions for their elimination. Some microorganisms are able to reduce toxic tellurite/selenite into less toxic elemental tellurium (Te) and selenium (Se). Here, we describe the use of the environmentally relevant β-proteobacterium Aromatoleum sp. CIB as a platform for tellurite elimination. Aromatoleum sp. CIB was shown to tolerate 0.2 and 0.5 mM tellurite at aerobic and anaerobic conditions, respectively. Furthermore, the CIB strain was able to reduce tellurite into elemental Te producing rod-shaped Te nanoparticles (TeNPs) of around 200 nm length. A search in the genome of Aromatoleum sp. CIB revealed the presence of a gene, AzCIB_0135, which encodes a new methyltransferase that methylates tellurite and also selenite. AzCIB_0135 orthologs are widely distributed in bacterial genomes. The overexpression of the AzCIB_0135 gene both in Escherichia coli and Aromatoleum sp. CIB speeds up tellurite and selenite removal, and it enhances the production of rod-shaped TeNPs and spherical Se nanoparticles (SeNPs), respectively. Thus, the overexpression of a methylase becomes a new genetic strategy to optimize bacterial catalysts for tellurite/selenite bioremediation and for the programmed biosynthesis of metallic nanoparticles of biotechnological interest., Consejo Superior de Investigaciones Científicas, Grant/Award Number: CSIC 2019 20E005; European Union H2020,Grant/Award Number: 101000733;Ministerio de Ciencia e Innovación, Grant/Award Number:BIO2016-79736-R,PCI2019-111833-2 and PID2019-110612RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Opportunities and obstacles in microbial synthesis of metal nanoparticles

  • Carmona, Manuel
  • Poblete-Castro, Ignacio
  • Rai, Mahendra
  • Turner, Raymond J.
6 p.-1 fig., Metallic nanoparticles (MeNPs) are widely used in many areas such as biomedicine, packaging, cosmetics, colourants, agriculture, antimicrobial agents, cleaning products, as components of electronic devices and nutritional supplements. In addition, some MeNPs exhibit quantum properties, making them suitable materials in the photonics, electronic and energy industries. Through the lens of technology, microbes can be considered nanofactories capable of producing enzymes, metabolites and capping materials involved in the synthesis, assembly and stabilization of MeNPs. This bioprocess is considered more ecofriendly and less energy intensive than the current chemical synthesis routes. However, microbial synthesis of MeNPs as an alternative method to the chemical synthesis of nanomaterials still faces some challenges that need to be solved. Some of these challenges are described in this Editorial., This work was supported by MCIN/AEI/10.13039/501100011033 and FEDER (grants PID2019-110612RB-I00 and PCI2019-111833-2), MCIN/AEI/10.13039/501100011033 and European Union Next GenerationEU/PRTR (TED2021-132135B-I00) and European Union H2020 Program (Grant 101000733). Support to R.J.T. from Natural Sciences and Engineering Research Council of Canada (Grant RGPIN/04811)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highlighting the potential of Synechococcus elongatus PCC 7942 as platform to produce ¿-linolenic acid through an updated genome-scale metabolic modeling

  • Santos-Merino, María
  • Gargantilla-Becerra, Álvaro
  • Cruz, Fernando de la
  • Nogales, Juan
Cyanobacteria are prokaryotic organisms that capture energy from sunlight using oxygenic photosynthesis and transform CO2 into products of interest such as fatty acids. Synechococcus elongatus PCC 7942 is a model cyanobacterium efficiently engineered to accumulate high levels of omega-3 fatty acids. However, its exploitation as a microbial cell factory requires a better knowledge of its metabolism, which can be approached by using systems biology tools. To fulfill this objective, we worked out an updated, more comprehensive, and functional genome-scale model of this freshwater cyanobacterium, which was termed iMS837. The model includes 837 genes, 887 reactions, and 801 metabolites. When compared with previous models of S. elongatus PCC 7942, iMS837 is more complete in key physiological and biotechnologically relevant metabolic hubs, such as fatty acid biosynthesis, oxidative phosphorylation, photosynthesis, and transport, among others. iMS837 shows high accuracy when predicting growth performance and gene essentiality. The validated model was further used as a test-bed for the assessment of suitable metabolic engineering strategies, yielding superior production of non-native omega-3 fatty acids such as α-linolenic acid (ALA). As previously reported, the computational analysis demonstrated that fabF overexpression is a feasible metabolic target to increase ALA production, whereas deletion and overexpression of fabH cannot be used for this purpose. Flux scanning based on enforced objective flux, a strain-design algorithm, allowed us to identify not only previously known gene overexpression targets that improve fatty acid synthesis, such as Acetyl-CoA carboxylase and β-ketoacyl-ACP synthase I, but also novel potential targets that might lead to higher ALA yields. Systematic sampling of the metabolic space contained in iMS837 identified a set of ten additional knockout metabolic targets that resulted in higher ALA productions. In silico simulations under photomixotrophic conditions with acetate or glucose as a carbon source boosted ALA production levels, indicating that photomixotrophic nutritional regimens could be potentially exploited in vivo to improve fatty acid production in cyanobacteria. Overall, we show that iMS837 is a powerful computational platform that proposes new metabolic engineering strategies to produce biotechnologically relevant compounds, using S. elongatus PCC 7942 as non-conventional microbial cell factory., This work was supported by the European Union’s Horizon 2020 Research and Innovation Programme under Grant agreement no. 101000733 (Promicon) by the Spanish Ministry of Science and Innovation (MICINN) grants RobExplode PID2019-108458RB-I00 (AEI/10.13039/501100011033) and TED2021-130689B-C33 to JN, and PID2020-117923GB-I00 to FdlC. Funding was likewise provided by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+). MS-M was the recipient of a Ph.D. fellowship (BES-2012-057387) from Spanish Ministry of Economy and Competitiveness (MINECO).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A model-driven approach to upcycling recalcitrant feedstocks in Pseudomonas putida by decoupling PHA production from nutrient limitation

  • Manoli, Maria-Tsampika
  • Gargantilla-Becerra, Álvaro
  • Del Cerro, Carlos
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
  • Nogales, Juan
24 p.-7 fig.-1 graph. abst., Bacterial polyhydroxyalkanoates (PHAs) have emerged as promising eco-friendly alternatives to petroleum-based plastics since they are synthesized from renewable resources and offer exceptional properties. However, their production is limited to the stationary growth phase under nutrient-limited conditions, requiring customized strategies and costly two-phase bioprocesses. In this study, we tackle these challenges by employing a model-driven approach to reroute carbon flux and remove regulatory constraints using synthetic biology. We construct a collection of Pseudomonas putida-overproducing strains at the expense of plastics and lignin-related compounds using growth-coupling approaches. PHA production was successfully achieved during growth phase, resulting in the production of up to 46% PHA/cell dry weight while maintaining a balanced carbon-to-nitrogen ratio. Our strains are additionally validated under an upcycling scenario using enzymatically hydrolyzed polyethylene terephthalate as a feedstock. These findings have the potential to revolutionize PHA production and address the global plastic crisis by overcoming the complexities of traditional PHA production bioprocesses., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 633962 (P4SB), 870294 (MIX-up), and 101000733 (PROMICON). We also acknowledge support from the Spanish Ministry of Innovation and Science (AEI/10.13039/501100011033) through projects BIO2017-83448-R_TECMABIO, PID2020-112766RB-C21-BIOCIR, PID2022-139247OB-I00 (Rob3D), and TED2021-130689B-C33 (SyCoSys). Funding was likewise provided by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New strategy for bioplastic and exopolysaccharides production: Enrichment of field microbiomes with cyanobacteria

  • Altamira-Algarra, Beatriz
  • Rueda, Estel
  • Lage, Artai
  • San León, David
  • Martínez-Blanch, Juan F
  • Nogales, Juan
  • García, Joan
  • Gonzalez-Flo, Eva
Seven photosynthethic microbiomes were collected from field environmental samples to test their potential in polyhydroxybutyrate (PHB) and exopolysaccharides (EPS) production, both alternatives to chemical-based polymers. Microscope observations together with microbial sequence analysis revealed the microbiome enrichment in cyanobacteria after culture growth under phosphorus limitation. PHB and EPS production were studied under three culture factors (phototrophy, mixotrophy and heterotrophy) by evaluating and optimizing the effect of three parameters (organic and inorganic carbon and days under light:dark cycles) by Box-Behnken design. Results showed that optimal conditions for both biopolymers synthesis were microbiome-dependent; however, the addition of organic carbon boosted PHB production in all the tested microbiomes, producing up to 14 %dcw PHB with the addition of 1.2 g acetate·L-1 and seven days under light:dark photoperiods. The highest EPS production was 59 mg·L-1 with the addition of 1.2 g acetate·L-1 and four days under light:dark photoperiods. The methodology used is suitable for enriching microbiomes in cyanobacteria, and for testing the best conditions for bioproduct synthesis for further scale up., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. J. Nogales acknowledges the suport of SyCoSys project, TED2021-130689B-C33 funded by MCIN/AEI/10.13039/ 501100011033 and the European Union “NextGenerationEU”/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rational Design Assisted by Evolutionary Engineering Allows (De)Construction and Optimization of Complex Phenotypes in Pseudomonas putida KT2440

  • Blázquez, Blas
  • Nogales, Juan
Beyond the rational construction of genetic determinants to encode target functions, complex phenotype engineering requires the contextualisation of their expression within the metabolic and genetic background of the host strain. Furthermore, wherever metabolic complexity is involved, phenotype engineering demands standard, reliable, plug-and-play tools. We introduce GENIO (GENome Integration and fitness Optimization platform for Pseudomonas putida), a framework to optimise genetic circuit performance by means of (i) chromosome-location-based differential gene expression and (ii) subsequent fitness improvement through evolutionary engineering if needed. Using gene expression strength and cell-to-cell variation, we characterised 10 P. putida chromosomal loci (ppLPS) to show that genome context rather than distance to ORI is the main factor driving differential expression performance. We further contextualised ppLPS gene expression against well-known chromosomal integration sites and plasmids displaying different copy numbers. GENIO supports comprehensive exploration of the gene expression space across P. putida's genome while unlocking performance optimization of complex heterologous metabolic pathways through evolutionary engineering. To demonstrate the usability of GENIO, we restored P. putida's aromatic hydrocarbon metabolism by (de)constructing the toluene/m-xylene catabolic pathway coded in the pWW0 plasmid. We also showed that engineering complex phenotypes requires accurate contextualisation of the synthetic pathways involved, a process that benefits from biological robustness., This research received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement numbers 814650 (SynBio4Flav), 870294 (MIX-UP) and 101000733 (PROMICON), as well as the TED2021-130689B-C33 (SyCoSys) and PID2022-139247OB-I00 (Rob3D) projects funded by MCIN/AEI/10.13039/501100011033 and European Union (Next Generation EU/PRTR) funding, a way to make Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving PHB production in cyanobacteria: Modeling the optimal light regime for growth

  • Perez-Counago, I.
  • Fernández-Montenegro, J. M .
  • Iglesias-Moreira, S.
  • Rodriguez-Lorenzo, F.
  • Placer-Lorenzo, M.
  • Villar- Sola, P.
  • Pancorbo-González, E.
  • Illade-Quinteiro, J.
  • Herrero-Castilla, L.
  • Álvarez-Rodríguez, J.A .
  • Altamira-Algarra, B.
  • Gonzalez-Flo, E.
  • García Martínez, Jorge Manuel
  • Guedes, F.
  • López-García, Martín
  • Muiños-Landin, S.
22 pages, 8 figures, 5 tables, The production of bioplastics, such as polyhydroxybutyrate (PHB), using cyanobacteria offers a sustainable alternative to conventional plastics. However, achieving economically viable production requires optimizing biomass growth. This study examined four growth models: Gompertz (empirical growth), Baranyi-Roberts (biologically dependent), Monod (nutrient dependent), and Aiba (irradiance dependent). The results indicate that a light-based model more accurately describes cyanobacterial growth and shows potential for optimizing light regimes. Additionally, an estimator was proposed to assess the potential PHB yield within the given biomass. Experiments were conducted to correlate photosynthetic efficiency with biomass production, providing deeper insights into the effects of light on growth. These findings support the development of optimized cultivation strategies, ultimately improving the economic viability of cyanobacteria-based bioplastics., This work was funded by the European Union’s Horizon 2020 research and innovation program under grant agreement No 101000733 (PROMICON project)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Protocol for obtaining polyhydroxyalkanoates from microbial cultures: Production, quantification, and analytical assays

  • Manoli, Maria-Tsampika
  • Hernández-Herreros, Natalia
  • Rivero-Buceta, Virginia
  • Rodríguez-Izquierdo, Alberto
  • Prieto, María Auxiliadora
Polyhydroxyalkanoates (PHAs), a family of natural bacterial biodegradable bio polymers, constitute a promising alternative to conventional plastics. Here, we present a protocol to monitor bacterial growth and biopolymer accumulation in shaken flasks using two model bacteria, Pseudomonas putida KT2440 and Cu priavidus necator H16. We also describe steps to achieve high cell-density cul tures in benchtop bioreactors using bioprocess engineering. Typical perfor mance metrics include biomass concentrations of 6.5–7 g cell dry weight (CDW)/L and PHA titers of 4.2–4.5 g/L for P. putida and 3.5 g/L for C. necator. We then detail procedures for downstream processing, assessing monomer composition, and determining its thermal properties., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 760994 (Engicoin), 870294 (MixUp), 101000733 (PROMICON), 101081782 (DeCypher), and 101081776 (AgriLoop) and the European Union and the Circular Bio-based Europe Joint Undertaking grant agreement no. 101156032 (ReBioCycle). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Cir cular Economy (PTI-Susplast), OPENVIRO (PID2023-146557OB-C21), and NOVELPOL (202320E107)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Robust strategy for bioplastic production from cyanobacteria-enriched microbiomes: insights from gene expression and population dynamics

  • Altamira-Algarra, Beatriz
  • Sun, Lin
  • San León Granado, David
  • Romero-Morillo, Lucía
  • Vurro, Livia
  • Nogales, Juan
  • Gonzalez-Flo, Eva
  • Garcia, Joan
Supplementary data to this article can be found online at https://doi.org/10.1016/j.cej.2025.164196, This work was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. acknowledges the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. L.S. thanks the financial support from the program of China Scholarships Council (No. 202308440158) J. N. acknowledges the support of SyCoSys project, TED2021-130689B-C33 funded by MCIN/AEI/10.13039/ 501100011033 and the European Union “NextGenerationEU”/PRTR. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program. The authors would like to sincerely thank ADM Biopolis (València, Spain) for their assistance in performing the 16S rRNA gene amplification, and the Barcelona Research Center in Multiscale Science and Engineering (Barcelona, Spain) for their support with the confocal laser scanning microscopy., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Microalgae harvesting for wastewater treatment and resources recovery: a review

  • Morais, Etiele Greque de|||0000-0003-2993-8572
  • Carvalho Fontes Sampaio, Igor
  • González Flo, Eva|||0000-0001-6560-9018
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Uggetti, Enrica|||0000-0001-6919-485X
  • García Serrano, Joan|||0000-0003-1258-8174
Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods., The authors would like to thank the support provided by two distinct projects: Cyan2Bio (funded by the Spanish Ministry of Science and Innovation (MCIN), the Research National Agency (AEI), and the European Regional Development Fund (FEDER) under the grant agreement PID2021-126564OB-C32) and PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733). The knowledge derived from these projects has been instrumental in enriching the depth of this article. Enrica Uggetti is grateful to the Spanish Ministry of Industry and Economy for her research grant (RYC2018-025514-I). Igor C.F. Sampaio is grateful to the Brazilian National Council for Scientific and Technological Development (CNPq) for the financial support and his postdoctoral scholarship (Call 26/2021). Eva Gonzalez-Flo is grateful to the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. Joan Garcia acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Enhancing pigment production with cyanobacteria-rich microbiomes: effect of light quality and exposure time

  • Bellver Catalá, Marta
  • Altamira Algarra, Beatriz
  • García Serrano, Joan|||0000-0003-1258-8174
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • González Flo, Eva|||0000-0001-6560-9018
Cyanobacteria-rich microbiomes may stand as a cost-effective source of pigments, as they exhibit improved stability in comparison to monocultures and do not require sterile media to grow. However, these bioproduct sources have not been thoroughly optimized for pigment production. The aim of the present study was to evaluate the effects of light quality and exposure time on pigment concentration and population distribution in 6 microbiomes rich in Synechococcus sp. and Synechocystis sp. A multivariable experimental design was implemented for selecting the optimal culture conditions in terms of light quality (white, red, green and blue) and exposure time (4 and 6 days). As a result, differential light quality exposures did not favor the growth of one species over another. Green light had a significantly positive effect on phycobiliprotein content in all microbiomes, with up to a 2.3-fold increase as compared to white light. Indeed, 4 days of exposure induced a change in phycobiliprotein composition in 5 microbiomes. Microbiome M11 was the best phycobiliprotein producer (content up to 145.5 mg gDW- 1 ). Meanwhile, carotenoid contents above 1.8 mg gDW- 1 were attained in all the microbiomes under optimized conditions. In conclusion, light quality modulation is a promising approach to stimulate the production of pigments in cyanobacteria-rich microbiomes., Authors would like to acknowledge the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON), for funding this study. Marta Bellver is grateful to the Spanish Ministry of Science and Innovation for her grant [PRE2019-091552]. Eva Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. Beatriz Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. Joan García acknowledges the support provided by the ICREA Academia program. Authors would like to acknowledge Sara Azhar for providing support in the laboratory., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Robust strategy for bioplastic production from cyanobacteria-enriched microbiomes: insights from gene expression and population dynamics

  • Altamira Algarra, Beatriz
  • Sun, Lin
  • San León Granada, David
  • Romero Morillo, Lucía
  • Vurro, Livia|||0009-0000-2485-480X
  • Nogales, Juan
  • González Flo, Eva|||0000-0001-6560-9018
  • García Serrano, Joan|||0000-0003-1258-8174
In this study, four cyanobacteria-rich microbiomes were evaluated in terms of PHB synthesis over 168 days. Despite applying consistent environmental and cultivation conditions to the cultures, significant differences in biopolymer accumulation were observed, highlighting the influence of microbial community on PHB production. By overlapping PHB quantification data, DNA sequencing and RT-qPCR data, links between PHB content, microbial community, and gene expression could be detected. The high PHB content in CW1 microbiome was associated with upregulation of the phaC gene, involved in PHB synthesis, and glgp1, linked to glycogen catabolism. This suggested an interaction between PHB and glycogen pathways that supports higher PHB accumulation. In contrast, lower PHB production in CW2 microbiome (a representative example of microbiome with reduced PHB content) correlated with the overexpression of gltA, a gene involved in the TCA cycle, which may divert metabolic resources away from PHB synthesis. Moreover, variations in the relative abundance of Cyanobacteria and Alphaproteobacteria were observed across microbiomes. The stabilization of Alphaproteobacteria and Cyanobacteria relative abundances in CW1 were associated to high PHB content. The findings suggest that maintaining a balanced coexistence between these microbial groups may be critical for achieving optimal PHB production in cyanobacteria-enriched microbiomes. However, it is important to note that the specific mechanisms underlying this interaction remain unclear and further investigation is needed to elucidate the precise roles of each microbial group in PHB accumulation., This work was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. acknowledges the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. L.S. thanks the financial support from the program of China Scholarships Council (No. 202308440158) J. N. acknowledges the support of SyCoSys project, TED2021-130689B-C33 funded by MCIN/ AEI/10.13039/ 501100011033 and the European Union “NextGenerationEU”/PRTR. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program. The authors would like to sincerely thank ADM Biopolis (Val` encia, Spain) for their assistance in performing the 16S rRNA gene amplification, and the Barcelona Research Center in Multiscale Science and Engineering (Barcelona, Spain) for their support with the confocal laser scanning microscopy., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Social life cycle assessment of bio-based products from microbiomes: additives, bioplastics, pigments and hydrogen

  • Ziegler Rodriguez, Kurt Eduardo|||0000-0002-7134-9037
  • González Flo, Eva|||0000-0001-6560-9018
  • García Serrano, Joan|||0000-0003-1258-8174
  • Garfi, Marianna|||0000-0001-9234-5580
In recent decades, interest in bio-based products from microbiomes has grown significantly, driven by increasing concerns over the sustainability of conventional and chemically derived products. Although significant technical progress has been made, limited awareness and comprehension of their social dimensions persist. This study aimed to analyse the social performance of the production of 4 bio-based products for both food and non-food applications (i.e. additives (Exopolysacharides (EPS)), bioplastics (Polyhydroxyalkanoates (PHA)), pigments (phycobiliproteins) and hydrogen) by means of novel bio-based routes based on microbiomes, using the Social Life Cycle Assessment (S-LCA) methodology. In total, 9 scenarios were considered, combining the sole or the co-production of different bio-products. The stakeholder groups were: workers, consumers, local community, value chain actors and society. Results showed that the sole production of bioplastics and hydrogen had the best social performance (total normalised scores up to 2.5 times higher than the other scenarios). It was mainly due to the high acceptance level for consumers and the better performance in terms of public commitment to sustainability issues for society. In particular, the non-food products (bioplastics and hydrogen) seemed to have higher acceptability from consumers and higher interest in terms of regulation and policy development. On the whole, all the scenarios showed good performance for workers (health and safety), consumers (quality and performance, acceptability) and the local community (number of jobs generated). More efforts should be made to develop specific regulations and policies (especially for additives and pigments) and implementation at full scale should be boosted to cover the technological development gap., This research has received funding from the European Union's Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). Joan García acknowledges the support provided by the ICREA Academia program. Eva GonzalezFlo would like to thank the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant (2021UPF-MS-12). Kurt Ziegler is grateful to the Universitat Politècnica de Catalunya and Banco Santander for the financial support of his predoctoral grant FPI-UPC (2022 FPI-UPC_21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Exploring simultaneous production of poly(3-hydroxybutyrate) and exopolysaccharides in cyanobacteria-rich microbiomes

  • Altamira Algarra, Beatriz
  • García Serrano, Joan|||0000-0003-1258-8174
  • Torres, Cristiana A.V.
  • Reis, Maria A.M.
  • González Flo, Eva|||0000-0001-6560-9018
The aim of this study was to explore the viability of the dual production of poly(3-hydroxybutyrate) (PHB) and exopolysaccharides (EPS) by seven microbiomes rich in cyanobacteria. Our initial experiments involved to screen for EPS-producing candidates and examine the impact of salinity and acetate on EPS synthesis. Salinity's known influence on EPS production and acetate's role in enhancing PHB production guided our parameter selection. Surprisingly, neither the introduction of an external carbon source (acetate) nor exposure to an abiotic stressor (salt) significantly altered EPS synthesis rates, which ranged from 25 to 150¿mg·L-1, or its composition, with glucose being the dominant sugar component. Scaling up to a 3¿L photobioreactor, we achieved simultaneous biopolymer production, reaching up to 205¿mg·L-1 EPS and 87¿mg·L-1 PHB. Additionally, the presence of uronic acid in the EPS facilitated biomass flocculation, streamlining the separation process, and potentially reducing associated time and costs., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research Grants (AGAUR) from the Government of Catalonia for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. C. A.V. Torres and M. A.M. Reis acknowledges national funds from FCT - Fundação para a Ciência e a Tecnologia, I.P., in the scope of the project UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences - UCIBIO and the project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy - i4HB., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

New strategy for bioplastic and exopolysaccharides production: enrichment of field microbiomes with cyanobacteria

  • Altamira Algarra, Beatriz
  • Rueda Hernández, Estel|||0000-0001-8681-3915
  • Lage Julia, Artai|||0009-0003-8994-8841
  • San León Granada, David
  • Martínez Blanch, Juan Francisco
  • Nogales, Juan
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
Seven photosynthethic microbiomes were collected from field environmental samples to test their potential in polyhydroxybutyrate (PHB) and exopolysaccharides (EPS) production, both alternatives to chemical-based polymers. Microscope observations together with microbial sequence analysis revealed the microbiome enrichment in cyanobacteria after culture growth under phosphorus limitation. PHB and EPS production were studied under three culture factors (phototrophy, mixotrophy and heterotrophy) by evaluating and optimizing the effect of three parameters (organic and inorganic carbon and days under light:dark cycles) by Box-Behnken design. Results showed that optimal conditions for both biopolymers synthesis were microbiome-dependent; however, the addition of organic carbon boosted PHB production in all the tested microbiomes, producing up to 14%dcw PHB with the addition of 1.2 g acetate·L-1 and seven days under light:dark photoperiods. The highest EPS production was 59 mg·L-1 with the addition of 1.2 g acetate·L-1 and four days under light:dark photoperiods. The methodology used is suitable for enriching microbiomes in cyanobacteria, and for testing the best conditions for bioproduct synthesis for further scale up., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. J. Nogales acknowledges the suport of SyCoSys project, TED2021-130689B-C33 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

PHB in cyanobacteria: analyzing production through images processing and FT-IR techniques

  • Villar Sola, Paula
  • Fernández Montenegro, Juan Manuel
  • Iglesias Moreira, Sandra
  • Rodríguez Lorenzo, Franciso
  • Vandervorst, Philippe
  • Pancorbo González, Erika
  • Placer Lorenzo, Miguel
  • Pérez Couñago, Inés
  • Muíños Landín, Santiago
  • Herrero Castilla, Luz
  • Illade Quinteiro, Julio
  • Álvarez Rodríguez, Juan Antonio
  • Altamira Algarra, Beatriz
  • González Flo, Eva|||0000-0001-6560-9018
  • García Serrano, Joan|||0000-0003-1258-8174
Cyanobacteria have gained significant attention in recent years due to their ability to produce a variety of valuable compounds. One such compound is polyhydroxybutyrate (PHB), a biodegradable polymer with immense potential in various industrial applications. Given that PHB is stored intracellularly, a dedicated process is needed to extract and measure the biopolymer content. Nevertheless, this process is time consuming and requires environmental hazardous chemicals, such as chloroform. In the present work, we present two complementary methods developed to analyze and quantify PHB production in cyanobacteria microbiomes. The first one consists in an image processing applied on images obtained from Transmission Electronic Microscope (TEM), that can potentially be applied to others type of microscope images as confocal, for qualitative assessment. In this case, a segmentation process allows differentiating PHB grains inside cyanobacteria cells. A metric is then established by computing pixels area taken up by PHB in the whole image and in cyanobacteria cells. A good correlation (higher than 0.65) is observed for all indicators as regard to PHB content. The second method relies on Fourier-transform infrared (FTIR) spectroscopy, as a non-destructive and rapid method to analyze PHB. Absorption peaks due to carbonyl, and Amide I and II group characteristics of monomer structure in PHB and cyanobacteria´s protein are observed. A correlation coefficient r2 of 0.96 is reached with the linear regression. A comparison between the two techniques is presented and their main advantages for PHB production optimization are explained., This research was supported by the European Union’s Horizon 2020 research and innovation program under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU. Ministry of Universities and Recovery. Transformation and Resilience Plan for her research grant [2021UPFMS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. J., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Cyanobacteria microbiomes for bioplastic production: critical review of key factors and challenges in scaling from laboratory to industry set-ups

  • Altamira Algarra, Beatriz
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
Cyanobacteria are photoautotrophic microorganisms capable of accumulating polyhydroxybutyrate (PHB). A novel approach for PHB production involves the exploration of cyanobacterial microbiomes, potentially reducing costs through non-sterile cultivation with non-pure substrates. Although still in its early stages, this approach shows promise for high yields and sustained synthesis. However, managing microbiome population dynamics in non-sterile environments requires effective monitoring and control. This review covers PHB production by cyanobacteria microbiomes, from sample procurement to laboratory-scale production. It highlights recent insights into optimizing cultivation parameters for enhanced biopolymer yield. Strategies to overcome challenges in PHB production are evaluated, emphasizing integrated molecular biology techniques with quantitative and qualitative PHB analysis. Finally, key challenges in scaling up production to industrial-scale scenarios are discussed, along with potential solutions to support the development of sustainable industrial processes. Cyanobacteria microbiomes show promise PHB production but challenges like managing non-sterile conditions and scaling up require optimized strategies and integrated approaches., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Improving PHB production in cyanobacteria: modeling the optimal light regime for growth

  • Pérez Couñago, Inés
  • Fernández Montenegro, Juan Manuel
  • Iglesias Moreira, Sandra
  • Rodríguez Lorenzo, Franciso
  • Placer Lorenzo, Miguel
  • Villar Sola, Paula
  • Pancorbo González, Erika
  • Illade Quinteiro, Julio
  • Herrero Castilla, Luz
  • Álvarez Rodríguez, Juan Antonio
  • Altamira Algarra, Beatriz
  • González Flo, Eva|||0000-0001-6560-9018
  • García Serrano, Joan|||0000-0003-1258-8174
The production of bioplastics, such as polyhydroxybutyrate (PHB), using cyanobacteria offers a sustainable alternative to conventional plastics. However, achieving economically viable production requires optimizing biomass growth. This study examined four growth models: Gompertz (empirical growth), Baranyi-Roberts (biologically dependent), Monod (nutrient dependent), and Aiba (irradiance dependent). The results indicate that a light-based model more accurately describes cyanobacterial growth and shows potential for optimizing light regimes. Additionally, an estimator was proposed to assess the potential PHB yield within the given biomass. Experiments were conducted to correlate photosynthetic efficiency with biomass production, providing deeper insights into the effects of light on growth. These findings support the development of optimized cultivation strategies, ultimately improving the economic viability of cyanobacteria-based bioplastics., This work was funded by the European Union’s Horizon 2020 research and innovation program under grant agreement No 101000733 (PROMICON project)., Peer Reviewed, I. Perez Couñago a J.M. Fernandez Montenegro a S. Iglesias Moreira a F. Rodriguez Lorenzo a M. Placer Lorenzo a P. Villar Sola a E. Pancorbo González a J. Illade Quinteiro a L. Herrero Castilla a J.A. Álvarez Rodríguez a B. Altamira Algarra b, E. Gonzalez Flo b J. Garcia b F. Guedes c M. Lopez-Garcia c S. Muiños-Landin a a AIMEN, Technology center, Environmental Technologies Unit/Robotics and Control Unit, Polígono Industrial de Cataboi SUR-PPI-2 (Sector 2) Parcela 3, O Porriño, 36418, Spain b GEMMA-Group of Environmental Engineering and Microbiology, Department of Civil and Environmental Engineering, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Politècnica de Catalunya-BarcelonaTech, Av. Eduard Maristany 16, Building C5.1, Barcelona, E-08019, Spain c Natural and Artificial Photonic Structures and Devices Group, International Iberian Nanotechnology Laboratory, Braga, 4715-330, Portugal
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Artificial intelligence based hyperespectral biomass estimator for cyanobacteria cultivation

  • Fernández Montenegro, Juan Manuel
  • Pérez Couñago, Inés
  • Iglesias Moreira, Sandra
  • Rodríguez Lorenzo, Franciso
  • Villar Sola, Paula
  • Pancorbo González, Erika
  • Altamira Algarra, Beatriz
  • García Serrano, Joan|||0000-0003-1258-8174
  • Muíños Lanín, S.
  • González Flo, Eva|||0000-0001-6560-9018
Hyperspectral imaging combined with machine learning offers an innovative approach for biomass monitoring at laboratory and industrial scale, but a proof-of-concept linking hyperspectral data to biomass prediction remains limited. This study fills that gap by creating a dataset with 205 biomass measurements and 450 hyperspectral images from three cyanobacteria-rich microbiomes. Data were acquired using a compact push-broom camera, followed by image preprocessing to extract spectral information for training three machine learning algorithms based on either spectral or image data. The Fully Connected Neural Network model achieved the highest accuracy, predicting biomass levels with a mean absolute error of 37¿mg/L (below 4¿%). Notably, a simplified multispectral model using only three wavelengths reached comparable accuracy, highlighting the potential of low-cost multispectral systems. This study demonstrates the feasibility of hyperspectral and multispectral imaging for biomass estimation in cyanobacterial cultures and supports the development of real-time, non-invasive monitoring tools for photosynthetic bioprocesses., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Bioplastic production by harnessing cyanobacteria-rich microbiomes for long-term synthesis

  • Altamira Algarra, Beatriz
  • Lage Julia, Artai|||0009-0003-8994-8841
  • Meléndez, Ana Lucía
  • Arnau Roca, Marc|||0000-0001-6038-3902
  • González Flo, Eva|||0000-0001-6560-9018
  • García Serrano, Joan|||0000-0003-1258-8174
Departing from the conventional axenic and heterotrophic cultures, our research ventures into unexplored territory by investigating the potential of photosynthetic microbiomes for polyhydroxybutyrate (PHB) synthesis, a biodegradable polyester that presents a sustainable alternative to conventional plastics. Our investigation focused on a cyanobacteria-enriched microbiome, dominated by Synechocystis sp. and Synechococcus sp., cultivated in a 3¿L photobioreactor under non-sterile conditions, achieving significant PHB production—up to 28¿% dry cell weight (dcw) over a span of 108¿days through alternating cycles of biomass growth and PHB accumulation. Nile Blue staining and Transmission Electron Microscope visualization allowed to successfully confirm the presence of PHB granules within cyanobacteria cells. Furthermore, the overexpression of PHA synthase during the accumulation phase directly correlated with the increased PHB production. Also, gene expression changes revealed glycogen as the primary storage compound, but under prolonged macronutrient stress, there was a shift of the carbon flux towards favoring PHB synthesis. Finally, analysis through Raman, Fourier- transform infrared spectroscopy and proton Nuclear Magnetic Resonance further validated the extracted polymer as PHB. Overall, it was demonstrated for the first time the feasibility of using phototrophic microbiomes to continuous production of PHB in a non-sterile system. This study also offers valuable insights into the metabolic pathways involved., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Monitoring PHB production in Synechocystis sp. with hyperspectral images

  • Rodríguez Lorenzo, Franciso
  • Placer Lorenzo, Miguel
  • Herrero Castilla, Luz
  • Álvarez Rodríguez, Juan Antonio
  • Iglesias, Sandra
  • Gómez, Santiago
  • Fernández Montenegro, Juan Manuel
  • Rueda Hernández, Estel|||0000-0001-8681-3915
  • Díez Montero, Rubén|||0000-0001-8435-0195
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
Microalgae wastewater treatment systems have the potential for producing added-value products. More specifically, cyanobacteria are able to accumulate polyhydroxybutyrates (PHBs), which can be extracted and used for bioplastics production. Nonetheless, PHB production requires proper culture conditions and continue monitoring, challenging the state-of-the-art technologies. The aim of this study was to investigate the application of hyperspectral technologies to monitor cyanobacteria population growth and PHB production. We have established a ground-breaking measurement method able to discern spectral reflectance changes from light emitted to cyanobacteria in different phases. All in all, enabling to distinguish between cyanobacteria growth phase and PHB accumulation phase. Furthermore, first tests of classification algorithms used for machine learning and image recognition technologies had been applied to automatically recognize the different cyanobacteria species from a complex microbial community containing cyanobacteria and microalgae cultivated in pilot-scale photobioreactors (PBRs). We have defined three main indicators for monitoring PHB production: (i) cyanobacteria specific-strain density, (ii) differentiate between growth and PHB-accumulation and (iii) chlorosis progression. The results presented in this study represent an interesting alternative for traditional measurements in cyanobacteria PHB production and its application in pilot-scale PBRs. Although not directly determining the amount of PHB production, they would give insights on the undergoing processes., This research was funded by the European Union H2020 Research and Innovation program [INCOVER, GA This research was funded by the European Union H2020 Research and Innovation program [INCOVER, GA 689242] and [PROMICON, GA 101000733]. R. Díez-Montero would like to thank the Spanish Ministry of Economy and Competitiveness for his research grant (FJCI-2016-30997). E. Rueda would like to thank the Spanish Ministry of Education, Culture and Sport for her grant (FPU18/04941). E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant (2021UPF-MS-12). The dissemination of results herein reflects only the author's view and the Commission is not responsible for any use that may be made of the information it contains. Special thanks to Ramón Villanova, Photon Lines Óptica, S.L., for providing the Pika L camera and linear stage equipment.], Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production

  • Rueda Hernández, Estel|||0000-0001-8681-3915
  • González Flo, Eva|||0000-0001-6560-9018
  • Mondal, Soumila
  • Forchhammer, Karl
  • Arias Lizárraga, Dulce María
  • Ludwig, Katharina
  • Drosg, Bernhard
  • Fritz, Ines
  • Gonzalez Esquer, Cesar Raul
  • Pacheco, Sara
  • García Serrano, Joan|||0000-0003-1258-8174
Polyhydroxyalkanoates (PHA) are a promising bio-based alternative to traditional plastics derived from petroleum. Cyanobacteria are photosynthetic organisms that produce PHA from CO<jats:sub>2</jats:sub> and sunlight, which can potentially reduce production costs and environmental footprint in comparison to heterotrophic bacteria cultures because (1) they utilize inorganic carbon sources for growth and (2) they do not require intensive aeration for oxygenation. Moreover, supplementing precursors such as propionate, acetate, valerate, etc., can be used to obtain various copolymers with plastic customizable properties in comparison to the classical homopolymers, such as polyhydroxybutyrate, PHB. This critical review covers the latest advances in PHA production, including recent discoveries in the metabolism interplay between PHA and glycogen production, and new insights into cultivation strategies that enhance PHA accumulation, and purification processes. This review also addresses the challenges and suggests potential solutions for a viable industrial PHAs production process., The authors would like to acknowledge PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733), AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32), the last two funded by the Spanish "Ministerio de Ciencia e Innovación", the Spanish "Agencia Estatal de Investigación", and “ERDF A way of making Europe”. The knowledge derived from these projects has been instrumental in enriching the depth of this article. Estel Rueda wants to thank the Spanish Ministry of Education, Culture, and Sport [FPU18/04941]. Eva Gonzalez-Flo would like to thank the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS12]. Karl Forchhammer wants to acknowledge the Deutsche Forschungsgemeinschaft grant [DFG Fo195/23-1] and Korea Evaluation Institute of Industrial Technology (KEIT) grant funded by the Korean government (MOTIE) [No. RS-2022-00155902]. J. García acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Potential sustained production of polyhydroxyalkanoate copolymers using cyanobacteria microbiomes

  • Sun, Lin
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
The copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is considered one of the most promising PHA candidates for bioplastics production, exhibiting superior physical properties than the homopolymer poly(3-hydroxybutyrate) (PHB). In this study, for the first time, PHBV was successfully produced under non-sterile conditions with Synechocystis sp. and Synechococcus sp. as the dominant cyanobacteria in microbiomes. A semi-continuous cultivation approach was employed, alternating between growth and accumulation phases over an extended period of 56 days. The process included valerate supplementation as an external carbon precursor, and the working volume was 2.5 L. Additionally, four independent repetitions of PHBV production and recovery were conducted. This methodology contrasts with conventional experiments, which typically involve only a single repetition, focus on isolated strains, and are limited to small-scale, short-term flask experiments. The maximum PHBV content reached 10.7%dcw, the highest achieved proportion of the monomer 3-hydroxyvalerate (HV) was 57.4%. Moreover, fluorescence microscopy images staining with Nile Blue positive validated that PHBV biosynthesis in cyanobacterial cells. Image quantification revealed that Synechococcus sp., produced larger PHBV granules (avg. 0.80±0.13 µm) than Synechocystis sp. (avg. 0.52±0.13 µm). Excessive valerate concentration at the start of the growth phases caused a certain inhibition, impairing both biomass productivity and nitrogen assimilation. Thus, optimizing valerate dosage is critical to balancing microbial metabolism and maximizing PHBV yield. This work demonstrates the potential feasibility of sustained and cyclic PHBV production and extraction, and establishing a scalable, eco-friendly biomanufacturing platform., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). L.S. thanks to financial support from the program of China Scholarships Council (No.202308440158). E.G.F. would like to thank the European Union- NextGenerationEU, Ministry of Universities and Recovery, Trans-formation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Photosynthetic species composition determines bioplastics production in microbiomes: strategy to enrich cyanobacteria PHB-producers

  • Altamira Algarra, Beatriz
  • Lage Julia, Artai|||0009-0003-8994-8841
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
The aim of this study was to set the operating mode in regards to nutrients, temperature and light to use as a strategy to enrich a microbiome rich in cyanobacteria in polyhydroxybutyrate (PHB)-producers in order to enhance the biopolymer production. Alternate growth and accumulation phases were conducted for 197 days in a 3 L photobioreactor. Although, presence of green algae potentially reduced PHB production, the microbiome produced up to 22 % dry cell weight (dcw) PHB. Results highlighted the important role of culture composition and suggested that this methodology could be applied to a robust microbiome rich in cyanobacteria to boost PHB production., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bioplastic production by harnessing cyanobacteria-rich microbiomes for long-term synthesis

  • Altamira Algarra, Beatriz
  • Lage Julia, Artai
  • Meléndez, Ana Lucía
  • Arnau Roca, Marc
  • González Flo, Eva
  • García Serrano, Joan
Departing from the conventional axenic and heterotrophic cultures, our research ventures into unexplored territory by investigating the potential of photosynthetic microbiomes for polyhydroxybutyrate (PHB) synthesis, a biodegradable polyester that presents a sustainable alternative to conventional plastics. Our investigation focused on a cyanobacteria-enriched microbiome, dominated by Synechocystis sp. and Synechococcus sp., cultivated in a 3¿L photobioreactor under non-sterile conditions, achieving significant PHB production—up to 28¿% dry cell weight (dcw) over a span of 108¿days through alternating cycles of biomass growth and PHB accumulation. Nile Blue staining and Transmission Electron Microscope visualization allowed to successfully confirm the presence of PHB granules within cyanobacteria cells. Furthermore, the overexpression of PHA synthase during the accumulation phase directly correlated with the increased PHB production. Also, gene expression changes revealed glycogen as the primary storage compound, but under prolonged macronutrient stress, there was a shift of the carbon flux towards favoring PHB synthesis. Finally, analysis through Raman, Fourier- transform infrared spectroscopy and proton Nuclear Magnetic Resonance further validated the extracted polymer as PHB. Overall, it was demonstrated for the first time the feasibility of using phototrophic microbiomes to continuous production of PHB in a non-sterile system. This study also offers valuable insights into the metabolic pathways involved., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production

  • Rueda Hernández, Estel
  • González Flo, Eva
  • Mondal, Soumila
  • Forchhammer, Karl
  • Arias Lizárraga, Dulce María
  • Ludwig, Katharina
  • Drosg, Bernhard
  • Fritz, Ines
  • Gonzalez Esquer, Cesar Raul
  • Pacheco, Sara
  • García Serrano, Joan
Polyhydroxyalkanoates (PHA) are a promising bio-based alternative to traditional plastics derived from petroleum. Cyanobacteria are photosynthetic organisms that produce PHA from CO<jats:sub>2</jats:sub> and sunlight, which can potentially reduce production costs and environmental footprint in comparison to heterotrophic bacteria cultures because (1) they utilize inorganic carbon sources for growth and (2) they do not require intensive aeration for oxygenation. Moreover, supplementing precursors such as propionate, acetate, valerate, etc., can be used to obtain various copolymers with plastic customizable properties in comparison to the classical homopolymers, such as polyhydroxybutyrate, PHB. This critical review covers the latest advances in PHA production, including recent discoveries in the metabolism interplay between PHA and glycogen production, and new insights into cultivation strategies that enhance PHA accumulation, and purification processes. This review also addresses the challenges and suggests potential solutions for a viable industrial PHAs production process., The authors would like to acknowledge PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733), AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32), the last two funded by the Spanish "Ministerio de Ciencia e Innovación", the Spanish "Agencia Estatal de Investigación", and “ERDF A way of making Europe”. The knowledge derived from these projects has been instrumental in enriching the depth of this article. Estel Rueda wants to thank the Spanish Ministry of Education, Culture, and Sport [FPU18/04941]. Eva Gonzalez-Flo would like to thank the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS12]. Karl Forchhammer wants to acknowledge the Deutsche Forschungsgemeinschaft grant [DFG Fo195/23-1] and Korea Evaluation Institute of Industrial Technology (KEIT) grant funded by the Korean government (MOTIE) [No. RS-2022-00155902]. J. García acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

New strategy for bioplastic and exopolysaccharides production: enrichment of field microbiomes with cyanobacteria

  • Altamira Algarra, Beatriz
  • Rueda Hernández, Estel
  • Lage Julia, Artai
  • San León Granada, David
  • Martínez Blanch, Juan Francisco
  • Nogales, Juan
  • García Serrano, Joan
  • González Flo, Eva
Seven photosynthethic microbiomes were collected from field environmental samples to test their potential in polyhydroxybutyrate (PHB) and exopolysaccharides (EPS) production, both alternatives to chemical-based polymers. Microscope observations together with microbial sequence analysis revealed the microbiome enrichment in cyanobacteria after culture growth under phosphorus limitation. PHB and EPS production were studied under three culture factors (phototrophy, mixotrophy and heterotrophy) by evaluating and optimizing the effect of three parameters (organic and inorganic carbon and days under light:dark cycles) by Box-Behnken design. Results showed that optimal conditions for both biopolymers synthesis were microbiome-dependent; however, the addition of organic carbon boosted PHB production in all the tested microbiomes, producing up to 14%dcw PHB with the addition of 1.2 g acetate·L-1 and seven days under light:dark photoperiods. The highest EPS production was 59 mg·L-1 with the addition of 1.2 g acetate·L-1 and four days under light:dark photoperiods. The methodology used is suitable for enriching microbiomes in cyanobacteria, and for testing the best conditions for bioproduct synthesis for further scale up., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. J. Nogales acknowledges the suport of SyCoSys project, TED2021-130689B-C33 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Social life cycle assessment of bio-based products from microbiomes: additives, bioplastics, pigments and hydrogen

  • Ziegler Rodriguez, Kurt Eduardo
  • González Flo, Eva
  • García Serrano, Joan
  • Garfi, Marianna
In recent decades, interest in bio-based products from microbiomes has grown significantly, driven by increasing concerns over the sustainability of conventional and chemically derived products. Although significant technical progress has been made, limited awareness and comprehension of their social dimensions persist. This study aimed to analyse the social performance of the production of 4 bio-based products for both food and non-food applications (i.e. additives (Exopolysacharides (EPS)), bioplastics (Polyhydroxyalkanoates (PHA)), pigments (phycobiliproteins) and hydrogen) by means of novel bio-based routes based on microbiomes, using the Social Life Cycle Assessment (S-LCA) methodology. In total, 9 scenarios were considered, combining the sole or the co-production of different bio-products. The stakeholder groups were: workers, consumers, local community, value chain actors and society. Results showed that the sole production of bioplastics and hydrogen had the best social performance (total normalised scores up to 2.5 times higher than the other scenarios). It was mainly due to the high acceptance level for consumers and the better performance in terms of public commitment to sustainability issues for society. In particular, the non-food products (bioplastics and hydrogen) seemed to have higher acceptability from consumers and higher interest in terms of regulation and policy development. On the whole, all the scenarios showed good performance for workers (health and safety), consumers (quality and performance, acceptability) and the local community (number of jobs generated). More efforts should be made to develop specific regulations and policies (especially for additives and pigments) and implementation at full scale should be boosted to cover the technological development gap., This research has received funding from the European Union's Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). Joan García acknowledges the support provided by the ICREA Academia program. Eva GonzalezFlo would like to thank the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant (2021UPF-MS-12). Kurt Ziegler is grateful to the Universitat Politècnica de Catalunya and Banco Santander for the financial support of his predoctoral grant FPI-UPC (2022 FPI-UPC_21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enhancing pigment production with cyanobacteria-rich microbiomes: effect of light quality and exposure time

  • Bellver Catalá, Marta
  • Altamira Algarra, Beatriz
  • García Serrano, Joan
  • Ferrer Martí, Ivet
  • González Flo, Eva
Cyanobacteria-rich microbiomes may stand as a cost-effective source of pigments, as they exhibit improved stability in comparison to monocultures and do not require sterile media to grow. However, these bioproduct sources have not been thoroughly optimized for pigment production. The aim of the present study was to evaluate the effects of light quality and exposure time on pigment concentration and population distribution in 6 microbiomes rich in Synechococcus sp. and Synechocystis sp. A multivariable experimental design was implemented for selecting the optimal culture conditions in terms of light quality (white, red, green and blue) and exposure time (4 and 6 days). As a result, differential light quality exposures did not favor the growth of one species over another. Green light had a significantly positive effect on phycobiliprotein content in all microbiomes, with up to a 2.3-fold increase as compared to white light. Indeed, 4 days of exposure induced a change in phycobiliprotein composition in 5 microbiomes. Microbiome M11 was the best phycobiliprotein producer (content up to 145.5 mg gDW- 1 ). Meanwhile, carotenoid contents above 1.8 mg gDW- 1 were attained in all the microbiomes under optimized conditions. In conclusion, light quality modulation is a promising approach to stimulate the production of pigments in cyanobacteria-rich microbiomes., Authors would like to acknowledge the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON), for funding this study. Marta Bellver is grateful to the Spanish Ministry of Science and Innovation for her grant [PRE2019-091552]. Eva Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. Beatriz Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. Joan García acknowledges the support provided by the ICREA Academia program. Authors would like to acknowledge Sara Azhar for providing support in the laboratory., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Monitoring PHB production in Synechocystis sp. with hyperspectral images

  • Rodríguez Lorenzo, Franciso
  • Placer Lorenzo, Miguel
  • Herrero Castilla, Luz
  • Álvarez Rodríguez, Juan Antonio
  • Iglesias, Sandra
  • Gómez, Santiago
  • Fernández Montenegro, Juan Manuel
  • Rueda Hernández, Estel
  • Díez Montero, Rubén
  • García Serrano, Joan
  • González Flo, Eva
Microalgae wastewater treatment systems have the potential for producing added-value products. More specifically, cyanobacteria are able to accumulate polyhydroxybutyrates (PHBs), which can be extracted and used for bioplastics production. Nonetheless, PHB production requires proper culture conditions and continue monitoring, challenging the state-of-the-art technologies. The aim of this study was to investigate the application of hyperspectral technologies to monitor cyanobacteria population growth and PHB production. We have established a ground-breaking measurement method able to discern spectral reflectance changes from light emitted to cyanobacteria in different phases. All in all, enabling to distinguish between cyanobacteria growth phase and PHB accumulation phase. Furthermore, first tests of classification algorithms used for machine learning and image recognition technologies had been applied to automatically recognize the different cyanobacteria species from a complex microbial community containing cyanobacteria and microalgae cultivated in pilot-scale photobioreactors (PBRs). We have defined three main indicators for monitoring PHB production: (i) cyanobacteria specific-strain density, (ii) differentiate between growth and PHB-accumulation and (iii) chlorosis progression. The results presented in this study represent an interesting alternative for traditional measurements in cyanobacteria PHB production and its application in pilot-scale PBRs. Although not directly determining the amount of PHB production, they would give insights on the undergoing processes., This research was funded by the European Union H2020 Research and Innovation program [INCOVER, GA This research was funded by the European Union H2020 Research and Innovation program [INCOVER, GA 689242] and [PROMICON, GA 101000733]. R. Díez-Montero would like to thank the Spanish Ministry of Economy and Competitiveness for his research grant (FJCI-2016-30997). E. Rueda would like to thank the Spanish Ministry of Education, Culture and Sport for her grant (FPU18/04941). E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant (2021UPF-MS-12). The dissemination of results herein reflects only the author's view and the Commission is not responsible for any use that may be made of the information it contains. Special thanks to Ramón Villanova, Photon Lines Óptica, S.L., for providing the Pika L camera and linear stage equipment.], Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Potential sustained production of polyhydroxyalkanoate copolymers using cyanobacteria microbiomes

  • Sun, Lin
  • García Serrano, Joan
  • González Flo, Eva
The copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is considered one of the most promising PHA candidates for bioplastics production, exhibiting superior physical properties than the homopolymer poly(3-hydroxybutyrate) (PHB). In this study, for the first time, PHBV was successfully produced under non-sterile conditions with Synechocystis sp. and Synechococcus sp. as the dominant cyanobacteria in microbiomes. A semi-continuous cultivation approach was employed, alternating between growth and accumulation phases over an extended period of 56 days. The process included valerate supplementation as an external carbon precursor, and the working volume was 2.5 L. Additionally, four independent repetitions of PHBV production and recovery were conducted. This methodology contrasts with conventional experiments, which typically involve only a single repetition, focus on isolated strains, and are limited to small-scale, short-term flask experiments. The maximum PHBV content reached 10.7%dcw, the highest achieved proportion of the monomer 3-hydroxyvalerate (HV) was 57.4%. Moreover, fluorescence microscopy images staining with Nile Blue positive validated that PHBV biosynthesis in cyanobacterial cells. Image quantification revealed that Synechococcus sp., produced larger PHBV granules (avg. 0.80±0.13 µm) than Synechocystis sp. (avg. 0.52±0.13 µm). Excessive valerate concentration at the start of the growth phases caused a certain inhibition, impairing both biomass productivity and nitrogen assimilation. Thus, optimizing valerate dosage is critical to balancing microbial metabolism and maximizing PHBV yield. This work demonstrates the potential feasibility of sustained and cyclic PHBV production and extraction, and establishing a scalable, eco-friendly biomanufacturing platform., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). L.S. thanks to financial support from the program of China Scholarships Council (No.202308440158). E.G.F. would like to thank the European Union- NextGenerationEU, Ministry of Universities and Recovery, Trans-formation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Photosynthetic species composition determines bioplastics production in microbiomes: strategy to enrich cyanobacteria PHB-producers

  • Altamira Algarra, Beatriz
  • Lage Julia, Artai
  • García Serrano, Joan
  • González Flo, Eva
The aim of this study was to set the operating mode in regards to nutrients, temperature and light to use as a strategy to enrich a microbiome rich in cyanobacteria in polyhydroxybutyrate (PHB)-producers in order to enhance the biopolymer production. Alternate growth and accumulation phases were conducted for 197 days in a 3 L photobioreactor. Although, presence of green algae potentially reduced PHB production, the microbiome produced up to 22 % dry cell weight (dcw) PHB. Results highlighted the important role of culture composition and suggested that this methodology could be applied to a robust microbiome rich in cyanobacteria to boost PHB production., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Cyanobacteria microbiomes for bioplastic production: critical review of key factors and challenges in scaling from laboratory to industry set-ups

  • Altamira Algarra, Beatriz
  • García Serrano, Joan
  • González Flo, Eva
Cyanobacteria are photoautotrophic microorganisms capable of accumulating polyhydroxybutyrate (PHB). A novel approach for PHB production involves the exploration of cyanobacterial microbiomes, potentially reducing costs through non-sterile cultivation with non-pure substrates. Although still in its early stages, this approach shows promise for high yields and sustained synthesis. However, managing microbiome population dynamics in non-sterile environments requires effective monitoring and control. This review covers PHB production by cyanobacteria microbiomes, from sample procurement to laboratory-scale production. It highlights recent insights into optimizing cultivation parameters for enhanced biopolymer yield. Strategies to overcome challenges in PHB production are evaluated, emphasizing integrated molecular biology techniques with quantitative and qualitative PHB analysis. Finally, key challenges in scaling up production to industrial-scale scenarios are discussed, along with potential solutions to support the development of sustainable industrial processes. Cyanobacteria microbiomes show promise PHB production but challenges like managing non-sterile conditions and scaling up require optimized strategies and integrated approaches., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Artificial intelligence based hyperespectral biomass estimator for cyanobacteria cultivation

  • Fernández Montenegro, Juan Manuel
  • Pérez Couñago, Inés
  • Iglesias Moreira, Sandra
  • Rodríguez Lorenzo, Franciso
  • Villar Sola, Paula
  • Pancorbo González, Erika
  • Altamira Algarra, Beatriz
  • García Serrano, Joan
  • Muíños Lanín, S.
  • González Flo, Eva
Hyperspectral imaging combined with machine learning offers an innovative approach for biomass monitoring at laboratory and industrial scale, but a proof-of-concept linking hyperspectral data to biomass prediction remains limited. This study fills that gap by creating a dataset with 205 biomass measurements and 450 hyperspectral images from three cyanobacteria-rich microbiomes. Data were acquired using a compact push-broom camera, followed by image preprocessing to extract spectral information for training three machine learning algorithms based on either spectral or image data. The Fully Connected Neural Network model achieved the highest accuracy, predicting biomass levels with a mean absolute error of 37¿mg/L (below 4¿%). Notably, a simplified multispectral model using only three wavelengths reached comparable accuracy, highlighting the potential of low-cost multispectral systems. This study demonstrates the feasibility of hyperspectral and multispectral imaging for biomass estimation in cyanobacterial cultures and supports the development of real-time, non-invasive monitoring tools for photosynthetic bioprocesses., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Robust strategy for bioplastic production from cyanobacteria-enriched microbiomes: insights from gene expression and population dynamics

  • Altamira Algarra, Beatriz
  • Sun, Lin
  • San León Granada, David
  • Romero Morillo, Lucía
  • Vurro, Livia
  • Nogales, Juan
  • González Flo, Eva
  • García Serrano, Joan
In this study, four cyanobacteria-rich microbiomes were evaluated in terms of PHB synthesis over 168 days. Despite applying consistent environmental and cultivation conditions to the cultures, significant differences in biopolymer accumulation were observed, highlighting the influence of microbial community on PHB production. By overlapping PHB quantification data, DNA sequencing and RT-qPCR data, links between PHB content, microbial community, and gene expression could be detected. The high PHB content in CW1 microbiome was associated with upregulation of the phaC gene, involved in PHB synthesis, and glgp1, linked to glycogen catabolism. This suggested an interaction between PHB and glycogen pathways that supports higher PHB accumulation. In contrast, lower PHB production in CW2 microbiome (a representative example of microbiome with reduced PHB content) correlated with the overexpression of gltA, a gene involved in the TCA cycle, which may divert metabolic resources away from PHB synthesis. Moreover, variations in the relative abundance of Cyanobacteria and Alphaproteobacteria were observed across microbiomes. The stabilization of Alphaproteobacteria and Cyanobacteria relative abundances in CW1 were associated to high PHB content. The findings suggest that maintaining a balanced coexistence between these microbial groups may be critical for achieving optimal PHB production in cyanobacteria-enriched microbiomes. However, it is important to note that the specific mechanisms underlying this interaction remain unclear and further investigation is needed to elucidate the precise roles of each microbial group in PHB accumulation., This work was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B.A.A. acknowledges the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. L.S. thanks the financial support from the program of China Scholarships Council (No. 202308440158) J. N. acknowledges the support of SyCoSys project, TED2021-130689B-C33 funded by MCIN/ AEI/10.13039/ 501100011033 and the European Union “NextGenerationEU”/PRTR. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program. The authors would like to sincerely thank ADM Biopolis (Val` encia, Spain) for their assistance in performing the 16S rRNA gene amplification, and the Barcelona Research Center in Multiscale Science and Engineering (Barcelona, Spain) for their support with the confocal laser scanning microscopy., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Improving PHB production in cyanobacteria: modeling the optimal light regime for growth

  • Pérez Couñago, Inés
  • Fernández Montenegro, Juan Manuel
  • Iglesias Moreira, Sandra
  • Rodríguez Lorenzo, Franciso
  • Placer Lorenzo, Miguel
  • Villar Sola, Paula
  • Pancorbo González, Erika
  • Illade Quinteiro, Julio
  • Herrero Castilla, Luz
  • Álvarez Rodríguez, Juan Antonio
  • Altamira Algarra, Beatriz
  • González Flo, Eva
The production of bioplastics, such as polyhydroxybutyrate (PHB), using cyanobacteria offers a sustainable alternative to conventional plastics. However, achieving economically viable production requires optimizing biomass growth. This study examined four growth models: Gompertz (empirical growth), Baranyi-Roberts (biologically dependent), Monod (nutrient dependent), and Aiba (irradiance dependent). The results indicate that a light-based model more accurately describes cyanobacterial growth and shows potential for optimizing light regimes. Additionally, an estimator was proposed to assess the potential PHB yield within the given biomass. Experiments were conducted to correlate photosynthetic efficiency with biomass production, providing deeper insights into the effects of light on growth. These findings support the development of optimized cultivation strategies, ultimately improving the economic viability of cyanobacteria-based bioplastics., This work was funded by the European Union’s Horizon 2020 research and innovation program under grant agreement No 101000733 (PROMICON project)., Peer Reviewed, I. Perez Couñago a J.M. Fernandez Montenegro a S. Iglesias Moreira a F. Rodriguez Lorenzo a M. Placer Lorenzo a P. Villar Sola a E. Pancorbo González a J. Illade Quinteiro a L. Herrero Castilla a J.A. Álvarez Rodríguez a B. Altamira Algarra b, E. Gonzalez Flo b J. Garcia b F. Guedes c M. Lopez-Garcia c S. Muiños-Landin a a AIMEN, Technology center, Environmental Technologies Unit/Robotics and Control Unit, Polígono Industrial de Cataboi SUR-PPI-2 (Sector 2) Parcela 3, O Porriño, 36418, Spain b GEMMA-Group of Environmental Engineering and Microbiology, Department of Civil and Environmental Engineering, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Politècnica de Catalunya-BarcelonaTech, Av. Eduard Maristany 16, Building C5.1, Barcelona, E-08019, Spain c Natural and Artificial Photonic Structures and Devices Group, International Iberian Nanotechnology Laboratory, Braga, 4715-330, Portugal, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Exploring simultaneous production of poly(3-hydroxybutyrate) and exopolysaccharides in cyanobacteria-rich microbiomes

  • Altamira Algarra, Beatriz
  • García Serrano, Joan
  • Torres, Cristiana A.V.
  • Reis, Maria A.M.
  • González Flo, Eva
The aim of this study was to explore the viability of the dual production of poly(3-hydroxybutyrate) (PHB) and exopolysaccharides (EPS) by seven microbiomes rich in cyanobacteria. Our initial experiments involved to screen for EPS-producing candidates and examine the impact of salinity and acetate on EPS synthesis. Salinity's known influence on EPS production and acetate's role in enhancing PHB production guided our parameter selection. Surprisingly, neither the introduction of an external carbon source (acetate) nor exposure to an abiotic stressor (salt) significantly altered EPS synthesis rates, which ranged from 25 to 150¿mg·L-1, or its composition, with glucose being the dominant sugar component. Scaling up to a 3¿L photobioreactor, we achieved simultaneous biopolymer production, reaching up to 205¿mg·L-1 EPS and 87¿mg·L-1 PHB. Additionally, the presence of uronic acid in the EPS facilitated biomass flocculation, streamlining the separation process, and potentially reducing associated time and costs., This research was supported by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research Grants (AGAUR) from the Government of Catalonia for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. C. A.V. Torres and M. A.M. Reis acknowledges national funds from FCT - Fundação para a Ciência e a Tecnologia, I.P., in the scope of the project UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences - UCIBIO and the project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy - i4HB., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

PHB in cyanobacteria: analyzing production through images processing and FT-IR techniques

  • Villar Sola, Paula
  • Fernández Montenegro, Juan Manuel
  • Iglesias Moreira, Sandra
  • Rodríguez Lorenzo, Franciso
  • Vandervorst, Philippe
  • Pancorbo González, Erika
  • Placer Lorenzo, Miguel
  • Pérez Couñago, Inés
  • Muíños Landín, Santiago
  • Herrero Castilla, Luz
  • Illade Quinteiro, Julio
  • Álvarez Rodríguez, Juan Antonio
  • Altamira Algarra, Beatriz
  • González Flo, Eva
  • García Serrano, Joan
Cyanobacteria have gained significant attention in recent years due to their ability to produce a variety of valuable compounds. One such compound is polyhydroxybutyrate (PHB), a biodegradable polymer with immense potential in various industrial applications. Given that PHB is stored intracellularly, a dedicated process is needed to extract and measure the biopolymer content. Nevertheless, this process is time consuming and requires environmental hazardous chemicals, such as chloroform. In the present work, we present two complementary methods developed to analyze and quantify PHB production in cyanobacteria microbiomes. The first one consists in an image processing applied on images obtained from Transmission Electronic Microscope (TEM), that can potentially be applied to others type of microscope images as confocal, for qualitative assessment. In this case, a segmentation process allows differentiating PHB grains inside cyanobacteria cells. A metric is then established by computing pixels area taken up by PHB in the whole image and in cyanobacteria cells. A good correlation (higher than 0.65) is observed for all indicators as regard to PHB content. The second method relies on Fourier-transform infrared (FTIR) spectroscopy, as a non-destructive and rapid method to analyze PHB. Absorption peaks due to carbonyl, and Amide I and II group characteristics of monomer structure in PHB and cyanobacteria´s protein are observed. A correlation coefficient r2 of 0.96 is reached with the linear regression. A comparison between the two techniques is presented and their main advantages for PHB production optimization are explained., This research was supported by the European Union’s Horizon 2020 research and innovation program under the grant agreement No 101000733 (project PROMICON). B. Altamira-Algarra thanks the Agency for Management of University and Research (AGAUR) for her grant [FIAGAUR_2021]. E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU. Ministry of Universities and Recovery. Transformation and Resilience Plan for her research grant [2021UPFMS-12]. J. Garcia acknowledges the support provided by the ICREA Academia program. J., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microalgae harvesting for wastewater treatment and resources recovery: a review

  • Morais, Etiele Greque de
  • Carvalho Fontes Sampaio, Igor
  • González Flo, Eva
  • Ferrer Martí, Ivet
  • Uggetti, Enrica
  • García Serrano, Joan
Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods., The authors would like to thank the support provided by two distinct projects: Cyan2Bio (funded by the Spanish Ministry of Science and Innovation (MCIN), the Research National Agency (AEI), and the European Regional Development Fund (FEDER) under the grant agreement PID2021-126564OB-C32) and PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733). The knowledge derived from these projects has been instrumental in enriching the depth of this article. Enrica Uggetti is grateful to the Spanish Ministry of Industry and Economy for her research grant (RYC2018-025514-I). Igor C.F. Sampaio is grateful to the Brazilian National Council for Scientific and Technological Development (CNPq) for the financial support and his postdoctoral scholarship (Call 26/2021). Eva Gonzalez-Flo is grateful to the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. Joan Garcia acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament, Postprint (published version)