Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plastic waste as a novel substrate for industrial biotechnology

  • Wierckx, Nick
  • Prieto, María Auxiliadora
  • Pomposiello, Pablo
  • Lorenzo, Víctor de
  • O'Connor, Kevin
  • Blank, Lars M.
4 p., The authors have received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 633962 for the project P4SB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

To be, or not to be biodegradable. . . that is the question for the bio-based plastics

  • Prieto, María Auxiliadora
6 p., Global warming, market and production capacity are being the key drivers for selecting the main players for the next decades in the market of bio-based plastics. The drop-in bio-based polymers such as the bio-based polyethylene terephtalate (PET) or polyethylene (PE), chemically identical to their petrochemical counterparts but having a component of biological origin, are in the top of the list. They are followed by new polymers such as PHA and PLA with a significant market growth rate since 2014 with projections to 2020. Research will provide improved strains designed through synthetic and systems biology approaches; furthermore, the use of low-cost substrates will contribute to the widespread application of these bio- based polymers. The durability of plastics is not considered anymore as a virtue, and interesting bioprospecting strategies to isolate microorganisms for assimilating the recalcitrant plastics will pave the way for in vivo strategies for plastic mineralization. In this context, waste management of bio-based plastic will be one of the most important issues in the near future in terms of the circular economy. There is a clear need for standardized labelling and sorting instructions, which should be regulated in a coordinated way by policymakers and material producers., Research on polymer biotechnology at the lab of Auxi Prieto is supported by grants from the European Union’s Seventh Framework Programme and for research, technological development and demonstration under grant agreement nº. 311815, and the Horizon 2020 research and innovation Programme under grant agreement nº 633962 and nº. 679050. We also acknowledge the Community of Madrid (P2013/MIT2807) and the Spanish Ministry of Economy (BIO201344878R, BIO2014-61515-EXP)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

About how to capture and exploit the CO2 surplus that nature, per se, is not capable of fixing

  • Godoy, Manuel S.
  • Mongili, Beatrice
  • Fino, Debora
  • Prieto, María Auxiliadora
10 p.-2 fig., Human activity has been altering many ecological cycles for decades, disturbing the natural mechanisms which are responsible for re-establishing the normal environmental balances. Probably, the most disrupted of these cycles is the cycle of carbon. In this context, many technologies have been developed for an efficient CO2 removal from the atmosphere. Once captured, it could be stored in large geological formations and other reservoirs like oceans. This strategy could present some environmental and economic problems. Alternately, CO2 can be transformed into carbonates or different added-value products, such as biofuels and bioplastics, recycling CO2 from fossil fuel. Currently different methods are being studied in this field. We classified them into biological, inorganic and hybrid systems for CO2 transformation. To be environmentally compatible, they should be powered by renewable energy sources. Although hybrid systems are still incipient technologies, they have made great advances in the recent years. In this scenario, biotechnology is the spearhead of ambitious strategies to capture CO2 and reduce global warming., Research on polymer biotechnology at the laboratory of Auxiliadora Prieto is supported by grants from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreements, no 633962, no. 679050, no. 745791 and no. 745737. We also acknowledge the Community of Madrid (P2013/MIT2807) and the Spanish Ministry of Economy (BIO2013-44878R, BIO2014- 61515-EXP)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of leucine zipper-like motifs in the oligomerization of Pseudomonas putida phasins

  • Tarazona, Natalia A.
  • Maestro, Beatriz
  • Revelles, Olga
  • Sanz, Jesús M.
  • Prieto, María Auxiliadora
38 p.-6 fig.-4 fig. supl.-2 tab. supl., Background Phasins are low molecular mass proteins that accumulate strongly in bacterial cells in response to the intracellular storage of polyhydroxyalkanoates (PHAs). Although lacking catalytic activity, phasins are the major components of the surface of the PHA granules and could be potentially involved in the formation of a network-like protein layer surrounding the polyester inclusions. Structural models revealed phasins to possess coiled-coil regions that might be important in the establishment of protein-protein interactions. However, there is not experimental evidence of a coiled-coil mediated oligomerization in these proteins., Methods Structure prediction analyses were used to characterize the coiled-coil motifs of phasins PhaF and PhaI –produced by the model bacterium Pseudomonas putida KT2440-. Their oligomerization was evaluated by biolayer interferometry and the in vivo two-hybrid (BACTH) system. The interaction ability of a series of coiled-coil mutated derivatives was also measured., Results The formation of PhaF and PhaI complexes was detected. A predicted short leucine zipper-like coiled-coil (ZIP), containing “ideal” residues located within the hydrophobic core, was shown responsible for the oligomers stability. The substitution of key residues (leucines or valines) in PhaI ZIP (ZIPI) for alanine reduced by four fold the oligomerization efficiency., Conclusions These results indicate that coiled-coil motifs are essential for phasin interactions. Correct oligomerization requires the formation of a stable hydrophobic interface between both phasins., General Significance Our findings elucidate the oligomerization motif of PhaF and PhaI. This motif is present in most phasins from PHA-accumulating bacteria and offers a potentially important target for modulating the PHA granules stability., This work was supported by the European Union’s Horizon 2020 research and innovation program (nº 633962), the Community of Madrid (P2013/MIT2807), and the Spanish Ministry of the Economy (BIO2017-83448-R and BIO2016-79323-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial activity of phasin PhaF from Pseudomonas putida KT2440 at hydrophobic-hydrophilic biointerfaces

  • Mato, Aranzazu
  • Tarazona, Natalia A.
  • Hidalgo, Alberto
  • Cruz, Antonio
  • Jiménez, Mercedes
  • Pérez-Gil, Jesús
  • Prieto, María Auxiliadora
37 p.-8 fig.-2 tab., Phasins, the major proteins coating polyhydroxyalkanoate (PHA) granules, have been proposed as suitable biosurfactants for multiple applications because of their amphiphilic nature. In this work, we analyzed the interfacial activity of the amphiphilic α-helical phasin PhaF from Pseudomonas putida KT2440 at different hydrophobic–hydrophilic interfacial environments. The binding of PhaF to surfaces containing PHA or phospholipids, postulated as structural components of PHA granules, was confirmed in vitro using supported lipid bilayers and confocal microscopy, with polyhydroxyoctanoate-co-hexanoate P(HO-co-HHx) and Escherichia coli lipid extract as model systems. The surfactant-like capabilities of PhaF were determined by measuring changes in surface pressure in Langmuir devices. PhaF spontaneously adsorbed at the air–water interface, reducing the surface tension from 72 mN/m (water surface tension at 25 °C) to 50 mN/m. The differences in the adsorption of the protein in the presence of different phospholipid films showed a marked preference for phosphatidylglycerol species, such as 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol. The PHA-binding domain of PhaF (BioF) conserved a similar surface activity to PhaF, suggesting that it is responsible for the surfactant properties of the whole protein. These new findings not only increase our knowledge about the role of phasins in the PHA machinery but also open new outlooks for the application of these proteins as biosurfactants., This work was supported by the European Union’s Horizon 2020 Research and innovation programme, grant agreement no. 633962 (P4SB), the Community of Madrid (P2013/MIT2807) and the Spanish Ministry of Science, Innovation and Universities (BIO2017-83448-R, BIO2015-67930-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular insights into the physical adsorption of amphiphilic protein PhaF onto copolyester surfaces

  • Tarazona, Natalia A.
  • Machatschek, Rainhard
  • Schulz, Burkhard
  • Prieto, María Auxiliadora
  • Lendlein, Andreas
33 p.-6 fig., Phasins are amphiphilic proteins located at the polymer-cytoplasm interface of bacterial polyhydroxyalkanoates (PHA). The immobilization of phasins on biomaterial surfaces is a promising way to enhance the hydrophilicity and supply cell-directing elements in bioinstructing processes. Optimizing the physical adsorption of phasins requires deep insights into molecular processes during polymer-protein interactions to preserve their structural conformation while optimizing surface coverage. Here, the assembly, organization and stability of phasin PhaF from Pseudomonas putida at interfaces is disclosed. The Langmuir technique, combined with in situ microscopy and spectroscopic methods, revealed that PhaF forms stable and robust monolayers at different temperatures, with an almost flat orientation of its alpha-helix at the air-water interface. PhaF adsorption to preformed monolayers of poly[(3-R-hydroxyoctanoate)-co-(3-R-hydroxyhexanoate)] (PHOHHx), yields stable mixed-layers below π = ~15.7 mN/m. Further insertion induces a molecular reorganization. PHOHHx with strong surface hydrophobicity is a more adequate substrate for PhaF adsorption than the less hydrophobic poly[(rac-lactide)-co-glycolide] (PLGA). The observed orientation of the main axis of the protein in relation to copolyester interfaces ensures the best exposure of the hydrophobic residues, providing a suitable coating strategy for functionalized polymers., The work was funded by the Helmholtz Graduate School Macromolecular Bioscience (no. VH-GS-503) and the Helmholtz Programme-oriented Funding. Additional funding was provided by the European Union’s Horizon 2020 research and innovation program (nº 633962), Ministerio de Ciencia Innovación y Universidades (BIO2017-83448-R), and the PhD Fellowship program of the Department of Science Technology and Innovation-Colciencias, Colombia. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Biogenesis of medium-chain-length polyhydroxyalkanoates

  • Kniewel, Ryan
  • Revelles, Olga
  • Prieto, María Auxiliadora
26 p.-3 fig.-2 tab., Medium-chain-length polyhydroxyalkanoates (mcl-PHA) are biotechnologically useful natural products found in many bacteria. This biopolymer functions as a carbon and energy storage reservoir in cells but has physical and mechanical properties that make it a promising bioplastic with applications ranging from adhesives to medical implants. Therefore, there is much interest in understanding the biology of mcl-PHA synthesis and metabolism. Increased knowledge of PHA biology serves as a foundation for the bioengineering of PHA and its eventual use as a biologically derived product. This chapter covers the state of knowledge on mcl-PHA, including its synthesis and its central role in cellular metabolism. Moreover, this chapter discusses methods for bioengineering mcl-PHA production in bacteria as well as synthetic biology methods for its study and production in the natural mcl-PHA producer, Pseudomonas putida., Research on polymer biotechnology in the laboratory of M. Auxiliadora Prieto is supported by funding from the European Union’s Horizon 2020 research and innovation program under grant agreements number 633962 and 679050. We also acknowledge support from the Community of Madrid (P2013/MIT2807) and the Spanish Ministry of Economy (BIO201344878R, BIO2014-61515-EXP)., Peer reviewed, Postprint
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dissecting the polyhydroxyalkanoate-binding domain of the phaf phasin: rational design of a minimized affinity tag, Running title: Rational design of a minimized PHA affinity tag

  • Mato, Aranzazu
  • Blanco Parte, Francisco German
  • Maestro, Beatriz
  • Sanz, Jesús M.
  • Pérez-Gil, Jesús
  • Prieto, María Auxiliadora
52 p.-9 fig.-3 tab., Phasin PhaF from Pseudomonas putida consists of a modular protein whose N-terminal domain (BioF) has been demonstrated to be responsible for the binding to the PHA granule. BioF has been exploited with biotechnological purposes as an affinity tag in the functionalization of PHA beads with fusion proteins both in vivo and in vitro The structural model of this domain suggests an amphipathic α-helical conformation with the hydrophobic residues facing the PHA granule. In this work, we have analysed the mean hydrophobicity and the hydrophobic moment of the native BioF tag to rationally design shorter versions that maintain the affinity for the granule. Hybrid proteins containing the green fluorescent protein (GFP) fused to the BioF derivatives were studied for in vivo localization on the PHA, stability on the surface of the PHA granule against pH, temperature and ionic strength, and their possible influence on the PHA synthesis. Based on the results obtained, a minimized BioF tag for PHA functionalization has been proposed (MinP), which retains similar binding properties but possesses an attractive biotechnological potential derived from its reduced size. The MinP tag was further validated by analyzing functionality and stability of the fusion proteins MinP-β-galactosidase and MinP-CueO from Escherichia coli., IMPORTANCE.Polyhydroxyalkanoates (PHAs) are biocompatible, non-toxic and biodegradable biopolymers with exceptional applications in the industrial and medical fields. The complex structure of the PHA granule can be exploited as a toolbox to display molecules of interest on their surface. Phasins, the most abundant group of proteins on the granule, have been employed as anchoring tags to obtain functionalized PHA beads for high-affinity bioseparation, enzyme immobilization, diagnostics or cell targeting. Here, a shorter module based on the previously designed BioF tag has been demonstrated to maintain the affinity for the PHA granule, with higher stability and similar functionalization efficiency. The use of a 67 % shorter peptide, which maintains the binding properties of the entire protein, constitutes an advantage for the immobilization of recombinant proteins on the PHA surface both in vitro and in vivo., This work was supported by the European Union’s Horizon 2020 Research and Innovation Programme, grant agreement no. 633962 (P4SB), the Spanish Ministry of Science, Innovation and Universities (BIO2017-83448-R, BIO2016-79323-R, RTI2018-094564-B-I00) and the Community of Madrid (P2013/MIT2807, P2018/NMT4389). Francisco Blanco is a recipient of a predoctoral grant from the State 560 Program for the Promotion of Talent and its Employability in R&D&I (PRE-2018- 561 083859) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phasin interactome reveals the interplay of PhaF with the polyhydroxyalkanoate transcriptional regulatory protein PhaD in Pseudomonas putida, Running title: PhaF-PhaD interplay

  • Tarazona, Natalia A.
  • Hernández-Arriaga, A.M.
  • Kniewel, Ryan
  • Prieto, María Auxiliadora
15 p.-6 fig.-2 tab, Phasin PhaF, a multifunctional protein associated with the surface of polyhydroxyalkanoate (PHA) granules that also interacts with the nucleoid, contributes significantly to PHA biogenesis in pseudomonads. As a protein present on the surface of PHA granules, PhaF participates in granule stabilization and segregation, whereas its deletion has a notable impact on overall transcriptome, PHA accumulation and cell physiology, suggesting more extensive functions besides solely being a granule structural protein. Here we followed a systematic approach to detect potential interactions of PhaF with other components of the cell, which could pinpoint unexplored functions of PhaF in the regulation of PHA production. We determined the PhaF interactome in Pseudomonas putida KT2440 via pull‐down‐mass spectrometry (PD‐MS) experiments. PhaF complexed with PHA‐related proteins, phasin PhaI and the transcriptional regulator PhaD, interactions that were verified to be direct using in vivo two‐hybrid analysis. The determination of the PHA granule proteome showed that PhaI and three other potential PhaF interacting partners, but not PhaD, were granule‐associated proteins. Analysis of the interaction of PhaF and PhaD with the phaI promoter by EMSA suggested a new role for PhaF in interacting with PhaD and raises new questions on the regulatory system controlling pha gene expression., This work was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 633962 (P4SB), the Community of Madrid (P2013/MIT2807, P2018/NMT4389) and the Spanish Ministry of Science, Innovation and Universities (BIO2017-83448-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthetic control of metabolic states in Pseudomonas putida by tuning polyhydroxyalkanoate cycle

  • Manoli, Maria-Tsampika
  • Nogales, Juan
  • Prieto, María Auxiliadora
19 p.-9 fig.-1 tab., Polyhydroxyalkanoates (PHAs) are polyesters produced by numerous microorganisms for energy and carbon storage. Simultaneous synthesis and degradation of PHA drives a dynamic cycle linked to the central carbon metabolism, which modulates numerous and diverse bacterial processes, such as stress endurance, pathogenesis, and persistence. Here, we analyze the role of the PHA cycle in conferring robustness to the model bacterium P. putida KT2440. To assess the effect of this cycle in the cell, we began by constructing a PHA depolymerase (PhaZ) mutant strain that had its PHA cycle blocked. We then restored the flux through the cycle in the context of an engineered library of P. putida strains harboring differential levels of PhaZ. High-throughput phenotyping analyses of this collection of strains revealed significant changes in response to PHA cycle performance impacting cell number and size, PHA accumulation, and production of extracellular (R)-hydroxyalkanoic acids. To understand the metabolic changes at the system level due to PHA turnover, we contextualized these physiological data using the genome-scale metabolic model iJN1411. Model-based predictions suggest successive metabolic steady states during the growth curve and an important carbon flux rerouting driven by the activity of the PHA cycle. Overall, we demonstrate that modulating the activity of the PHA cycle gives us control over the carbon metabolism of P. putida, which in turn will give us the ability to tailor cellular mechanisms driving stress tolerance, e.g., defenses against oxidative stress, and any potential biotechnological applications., This research was funded by the European Union’s Horizon 2020 research and innovation program under grant agreement number 633962 (P4SB) and 870294 (MIX-up). We also acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities through projects BIO2017-83448-R_TECMABIO and RobExplode PID2019‐108458RB‐I00 (AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ingeniería metabólica de sistemas para la revalorización de residuos plásticos y lignina en bioplásticos utilizando Pseudomonas putida

  • Manoli, Maria-Tsampika
  • Del Cerro, Carlos
  • Prieto, María Auxiliadora
  • Nogales, Juan
1 p., Superadas las primeras generaciones de biofactorias alimentadas por fuentes de carbono fácilmente hidrolizables, las nuevas generaciones requieren de materias primas que no compitan con procesos agrícolas. En este sentido, la posibilidad de utilizar polímeros naturales como la lignina o sintéticos como plásticos derivados del petróleo, no solo cumple este requerimiento, sino que posibilita la sostenibilidad del proceso a la vez que resuelve problemas medioambientales a escala global. En este trabajo, abordamos este reto mediante la revalorización de metabolitos derivados de la lignina y de tereftalato de polietileno (PET) y el poliuretano (PU) en bioplásticos (Polihidroxialcanoatos, PHA) usando a la bacteria modelo en biotecnología Pseudomonas putida KT2440 usando aproximaciones de ingeniería metabólica de sistemas. En primer lugar, se utilizó el modelo metabólico de P. putida, iJN1411, como plataforma computacional para diseñar una colección de cepas in sílico superproductoras de PHA a partir de metabolitos derivados de la hidrólisis de estos polímeros.Posteriormente, los diseños más prometedores fueron implementados utilizando tecnologías de vanguardia de edición genética y mutagénesis en esta bacteria. Las cepas resultantes mostraron una producción de PHA muy prometedora. Finalmente, la contextualización fenotípica de estas cepas usando el modelo iJN1411 no sólo identificó los cambios metabólicos claves responsables de esta alta producción, sino que sugirió nuevas intervenciones genéticas que incrementaría aún más los rendimientos obtenidos., Agradecemos financiación de los programas Horizonte 2020 de la UE P4SB/no 633962, MixUp/no 870294 y del Ministerio de Economía BIO2017-83448-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heterologous constitutive production of short-chain-length polyhydroxyalkanoates in Pseudomonas putida KT2440: the involvement of IbpA inclusion body protein

  • Manoli, Maria-Tsampika
  • Blanco Parte, Francisco German
  • Rivero-Buceta, Virginia
  • Kniewel, Ryan
  • Herrera Alarcón, Sandra
  • Salgado-Briegas, Sergio
  • Prieto, María Auxiliadora
18 p.-6 fig.-5 tab., Designing cell factories for the production of novel polyhydroxyalkanoates (PHAs) via smart metabolic engineering is key to obtain à la carte materials with tailored physicochemical properties. To this end, we used the model medium-chain-length-PHA producing bacterium, P. putida KT2440 as a chassis, which is characterized by its metabolic versatility and stress tolerance. Different PHA biosynthetic modules were assembled in expression plasmids using the Golden gate/MoClo modular assembly technique to implement an orthogonal short-chain-lengh-PHA (scl-PHA) switch in a “deaf” PHA mutant. This was specifically constructed to override endogenous multilevel regulation of PHA synthesis in the native strain. We generated a panel of engineered approaches carrying the genes from Rhodospirillum rubrum, Cupriavidus necator and Pseudomonas pseudoalcaligenes, demonstrating that diverse scl-PHAs can be constitutively produced in the chassis strain to varying yields from 23% to 84% PHA/CDW. Co-feeding assays of the most promising engineered strain harboring the PHA machinery from C. necator resulted to a panel of PHBV from 0.6% to 19% C5 monomeric incorporation. Chromosomally integrated PHA machineries with high PhaCCn synthase dosage successfully resulted in 68% PHA/CDW production. Interestingly, an inverse relationship between PhaC synthase dosage and granule size distribution was demonstrated in the heterologous host. In this vein, it is proposed the key involvement of inclusion body protein IbpA to the heterologous production of tailored PHA in P. putida KT2440., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 633962 (P4SB), 814418 (SinFonia) and 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID 2020-112766RB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Golden Standard: a complete standard, portable, and interoperative MoClo tool for model and non-model proteobacteria

  • Blázquez, Blas
  • San León, David
  • Torres-Bacete, Jesús
  • Gómez-Luengo, Álvaro
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
16 p.-8 fig.-1 tab.-1 graph.abst., Modular cloning has become a benchmark technology in synthetic biology. However, a notable disparity exists between its remarkable development and the need for standardization to facilitate seamless interoperability among systems. The field is thus impeded by an overwhelming proliferation of organism-specific systems that frequently lack compatibility. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture. GS unlocks modular cloning applications for most bacteria, and delivers combinatorial multi-part assembly to create genetic circuits of up to twenty transcription units (TUs). Reliance on MoClo syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was validated in terms of DNA assembly, portability, interoperability and phenotype engineering in α-, β-, γ- and δ-proteobacteria. Furthermore, we provide a computational pipeline for parts characterization that was used to assess the performance of GS parts. To promote community-driven development of GS, we provide a dedicated web-portal including a repository of parts, vectors, and Wizard and Setup tools that guide users in designing constructs. Overall, GS establishes an open, standardized framework propelling the progress of synthetic biology as a whole., European Union's Horizon 2020 research and innovation program [814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), 870294 (MixUp)]; Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 [AEI /10.13039/501100011033], BIO2017-83448-R and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+); A.G.L. was funded by ‘Fondo Social Europeo’ and ‘Iniciativa de Empleo Juvenil (YEI)’ [PEJ-2020-AI/BIO-18028] and S.S. by a FPU (Ayuda para la formación de profesorado universitario) fellowship [FPU17/03978] from the Spanish Ministry of Universities. Funding for open access charge: Consejo Superior de Investigaciones Científicas (CSIC) [82582328]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A model-driven approach to upcycling recalcitrant feedstocks in Pseudomonas putida by decoupling PHA production from nutrient limitation

  • Manoli, Maria-Tsampika
  • Gargantilla-Becerra, Álvaro
  • Del Cerro, Carlos
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
  • Nogales, Juan
24 p.-7 fig.-1 graph. abst., Bacterial polyhydroxyalkanoates (PHAs) have emerged as promising eco-friendly alternatives to petroleum-based plastics since they are synthesized from renewable resources and offer exceptional properties. However, their production is limited to the stationary growth phase under nutrient-limited conditions, requiring customized strategies and costly two-phase bioprocesses. In this study, we tackle these challenges by employing a model-driven approach to reroute carbon flux and remove regulatory constraints using synthetic biology. We construct a collection of Pseudomonas putida-overproducing strains at the expense of plastics and lignin-related compounds using growth-coupling approaches. PHA production was successfully achieved during growth phase, resulting in the production of up to 46% PHA/cell dry weight while maintaining a balanced carbon-to-nitrogen ratio. Our strains are additionally validated under an upcycling scenario using enzymatically hydrolyzed polyethylene terephthalate as a feedstock. These findings have the potential to revolutionize PHA production and address the global plastic crisis by overcoming the complexities of traditional PHA production bioprocesses., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 633962 (P4SB), 870294 (MIX-up), and 101000733 (PROMICON). We also acknowledge support from the Spanish Ministry of Innovation and Science (AEI/10.13039/501100011033) through projects BIO2017-83448-R_TECMABIO, PID2020-112766RB-C21-BIOCIR, PID2022-139247OB-I00 (Rob3D), and TED2021-130689B-C33 (SyCoSys). Funding was likewise provided by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Golden Standard: A complete standard, portable, and interoperative MoClo tool for model and non-model bacterial hosts

  • Blázquez, Blas
  • Torres-Bacete, Jesús
  • San León, David
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
39 p.-7 fig.-2 tab., Modular cloning assembly has become a benchmark technology in synthetic biology. However, there is a mismatch between its impressive development and the standardization required to promote interoperability between the different systems available. The full development of the field is thus hampered by a surge of oftentimes incompatible organism-specific systems. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture (SEVA). GS unlocks modular cloning applications with any type of microorganism and delivers consistent combinatorial multi-part assembly of standardized genetic elements to create genetic circuits of up to twenty transcription units. Reliance on the Golden Gate syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was fully validated in terms of DNA assembly performance, portability and phenotype engineering in model and non-model bacteria. In order to facilitate the widespread adoption and future community-driven development of GS, we provide a web-portal featuring: i) a repository of parts and vectors, ii) a SBOLHub for exchange and analysis of constructs and iii) Wizard and Setup tools to guide the design of constructs using stored and user-specific parts., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under grant agreements no. 814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), and 870294 (MixUp), the Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 (AEI /10.13039/501100011033), BIO2017-83448-R, and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). SS was supported by a FPU (Ayuda para la formación de profesorado universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Role of leucine zipper-like motifs in the oligomerization of Pseudomonas putida phasins

  • Tarazona, Natalia
  • Maestro García-Donas, María Beatriz
  • Revelles, Olga
  • Sanz, Jesús
  • Prieto, María Auxiliadora
Background Phasins are low molecular mass proteins that accumulate strongly in bacterial cells in response to the intracellular storage of polyhydroxyalkanoates (PHA). Although lacking catalytic activity, phasins are the major components of the surface of the PHA granules and could be potentially involved in the formation of a network-like protein layer surrounding the polyester inclusions. Structural models revealed phasins to possess coiled-coil regions that might be important in the establishment of protein-protein interactions. However, there is not experimental evidence of a coiled-coil mediated oligomerization in these proteins. Methods Structure prediction analyses were used to characterize the coiled-coil motifs of phasins PhaF and PhaI –produced by the model bacterium Pseudomonas putida KT2440–. Their oligomerization was evaluated by biolayer interferometry and the in vivo two-hybrid (BACTH) system. The interaction ability of a series of coiled-coil mutated derivatives was also measured. Results The formation of PhaF and PhaI complexes was detected. A predicted short leucine zipper-like coiled-coil (ZIP), containing “ideal” residues located within the hydrophobic core, was shown responsible for the oligomers stability. The substitution of key residues (leucines or valines) in PhaI ZIP (ZIPI) for alanine reduced by four fold the oligomerization efficiency. Conclusions These results indicate that coiled-coil motifs are essential for phasin interactions. Correct oligomerization requires the formation of a stable hydrophobic interface between both phasins. General Significance. Our findings elucidate the oligomerization motif of PhaF and PhaI. This motif is present in most phasins from PHA-accumulating bacteria and offers a potentially important target for modulating the PHA granules stability.