Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 46
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anti-staphylococcal hydrogels based on bacterial cellulose and the antimicrobial biopolyester poly(3-hydroxy-acetylthioalkanoate-co-3-hydroxyalkanoate)

  • Rivero-Buceta, Virginia
  • Aguilar, María Rosa
  • Hernández-Arriaga, A.M.
  • Blanco Parte, Francisco German
  • Rojas, Antonia
  • Tortajada, Marta
  • Ramírez-Jiménez, Rosa Ana
  • Vázquez-Lasa, Blanca
  • Prieto, María Auxiliadora
11 p.-7 fig.-4 tab., Polymeric hydrogels from bacterial cellulose (BC) have been widely used for the development of wound dressings due to its water holding capacity, its high tensile strength and flexibility, its permeability to gases and liquids, but lacks antibacterial activity. In this work, we have developed novel antimicrobial hydrogels composed of BC and the antimicrobial poly(3-hydroxy-acetylthioalkanoate-co-3-hydroxyalkanoate) (PHACOS). Hydrogels based on different PHACOS contents (20 and 50 wt%) were generated and analysed through different techniques (IR, DSC, TGA, rheology, SEM and EDX) and their bactericidal activity was studied against Staphylococcus aureus. PHACOS20 (BC 80%-PHACOS 20%) hydrogel shows mechanical and thermal properties in the range of human skin and anti-staphylococcal activity (kills 1.8 logs) demonstrating a huge potential for wound healing applications. Furthermore, the cytotoxicity assay using fibroblast cells showed that it keeps cell viability over 85% in all the cases after seven days., Authors thank financial support to thank the Spanish Ministry of Science,Innovation and Universities [MAT2017-84277-R and Bio2017-8344-8-R], the European Union’s Horizon 2020 Research and Innovation Programme [grant agreement no 870294 (Mix-Up)] and the Community of Madrid [P2018/NMT4389] for the financial support of this project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Environmental Performance of Pseudomonas putida with a Uracylated Genome

  • Algar, Elena
  • Al-Ramahi, Yamal
  • Lorenzo, Víctor de
  • Martínez García, Esteban
A variant of the soil bacterium Pseudomonas putida with a genome containing a ∼20 % replacement of the whole of thymine (T) by uracil (U) was made by deleting genes ung (uracil DNA glycosylase) and dut (deoxyuridine 5′‐triphosphate nucleotide hydrolase). Proteomic comparisons revealed that, of 281 up‐regulated and 96 down‐regulated proteins in the Δung Δdut cells, as compared to the wild‐type, many were involved in nucleotide metabolism. Unexpectedly, genome uracylation did not greatly change the gross environmental endurance profile of P. putida, increased spontaneous mutagenesis by only twofold and supported expression of heterologous proteins well. As U‐enriched DNA is potentially degraded by the base excision repair of recipients encoding a uracil DNA glycosylase, we then tested the spread potential of genetic material originating in the Δung Δdut cells either within the same species or in a commonly used Escherichia coli strain. Transformation and conjugation experiments revealed that horizontal gene transfer of U‐containing plasmids fared worse than those made of standard DNA by two orders of magnitude. Although this figure does not guarantee the certainty of containment, it suggests a general strategy for curbing the dispersal of recombinant genetic constructs., This work was funded by the SETH Project of the Spanish Ministry of Science RTI 2018‐095584‐B‐C42, the MADONNA (H2020‐FET‐OPEN‐RIA‐2017‐1‐766975), BioRoboost (H2020‐NMBP‐BIO‐CSA‐2018), SYNBIO4FLAV (H2020‐NMBP/0500) and MIX‐UP (H2020‐Grant 870294) Contracts of the European Union and the S2017/BMD‐3691 InGEMICS‐CM Project of the Comunidad de Madrid (European Structural and Investment Funds).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-Efficiency Multi-site Genomic Editing of Pseudomonas putida through Thermoinducible ssDNA Recombineering

  • Aparicio, Tomás
  • Nyerges, Akos
  • Martínez-García, Esteban
  • Lorenzo, Víctor de
© 2020 The Author(s), Application of single-stranded DNA recombineering for genome editing of species other than enterobacteria is limited by the efficiency of the recombinase and the action of endogenous mismatch repair (MMR) systems. In this work we have set up a genetic system for entering multiple changes in the chromosome of the biotechnologically relevant strain EM42 of Pseudomononas putida. To this end high-level heat-inducible co-transcription of the rec2 recombinase and P. putida's allele mutLE36KPP was designed under the control of the PL/cI857 system. Cycles of short thermal shifts followed by transformation with a suite of mutagenic oligos delivered different types of genomic changes at frequencies up to 10% per single modification. The same approach was instrumental to super-diversify short chromosomal portions for creating libraries of functional genomic segments—e.g., ribosomal-binding sites. These results enabled multiplexing of genome engineering of P. putida, as required for metabolic reprogramming of this important synthetic biology chassis., This work was funded by the MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), BioRoboost (H2020-NMBP-BIO-CSA-2018), SYNBIO4FLAV (H2020-NMBP/0500), and MIX-UP (H2020-Grant 870294) contracts of the European Union and the S2017/BMD-3691 InGEMICS-CM Project of the Comunidad de Madrid (European Structural and Investment Funds).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Naked Bacterium: Emerging Properties of a Surfome-Streamlined Pseudomonas putida Strain

  • Martínez-García, Esteban
  • Fraile, Sofía
  • Rodríguez Espeso, David
  • Vecchietti, Davide
  • Bertoni, Giovanni
  • Lorenzo, Víctor de
Environmental bacteria are most often endowed with native surface-attachment programs that frequently conflict with efforts to engineer biofilms and synthetic communities with given tridimensional architectures. In this work, we report the editing of the genome of Pseudomonas putida KT2440 for stripping the cells of most outer-facing structures of the bacterial envelope that mediate motion, binding to surfaces, and biofilm formation. To this end, 23 segments of the P. putida chromosome encoding a suite of such functions were deleted, resulting in the surface-naked strain EM371, the physical properties of which changed dramatically in respect to the wild type counterpart. As a consequence, surface-edited P. putida cells were unable to form biofilms on solid supports and, because of the swimming deficiency and other alterations, showed a much faster sedimentation in liquid media. Surface-naked bacteria were then used as carriers of interacting partners (e.g., Jun–Fos domains) ectopically expressed by means of an autotransporter display system on the now easily accessible cell envelope. Abstraction of individual bacteria as adhesin-coated spherocylinders enabled rigorous quantitative description of the multicell interplay brought about by thereby engineered physical interactions. The model was then applied to parametrize the data extracted from automated analysis of confocal microscopy images of the experimentally assembled bacterial flocks for analyzing their structure and distribution. The resulting data not only corroborated the value of P. putida EM371 over the parental strain as a platform for display artificial adhesins but also provided a strategy for rational engineering of catalytic communities., This work was funded by the SETH (RTI2018-095584-B-C42) (MINECO/FEDER), SyCoLiM (ERA-COBIOTECH 2018—PCI2019-111859-2) Project of the Spanish Ministry of Science and Innovation. It was also funded by MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), BioRoboost (H2020-NMBP-BIO-CSA-2018-820699), SynBio4Flav (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650), and MIX-UP (MIX-UP H2020-BIO-CN-2019-870294) Contracts of the European Union and the InGEMICS-CM (S2017/BMD-3691) Project of the Comunidad de Madrid—European Structural and Investment Funds (FSE, FECER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Display of Designer Protein Scaffolds on Genome-Reduced Strains of Pseudomonas putida

  • Dvorak, P.
  • Bayer, Edward A.
  • Lorenzo, Víctor de
The bacterium Pseudomonas putida KT2440 is gaining considerable interest as a microbial platform for biotechnological valorization of polymeric organic materials, such as lignocellulosic residues or plastics. However, P. putida on its own cannot make much use of such complex substrates, mainly because it lacks an efficient extracellular depolymerizing apparatus. We seek to address this limitation by adopting a recombinant cellulosome strategy for this host. In this work, we report an essential step in this endeavor—a display of designer enzyme-anchoring protein “scaffoldins”, encompassing cohesin binding domains from divergent cellulolytic bacterial species on the P. putida surface. Two P. putida chassis strains, EM42 and EM371, with streamlined genomes and differences in the composition of the outer membrane were employed in this study. Scaffoldin variants were optimally delivered to their surface with one of four tested autotransporter systems (Ag43 from Escherichia coli), and the efficient display was confirmed by extracellular attachment of chimeric β-glucosidase and fluorescent proteins. Our results not only highlight the value of cell surface engineering for presentation of recombinant proteins on the envelope of Gram-negative bacteria but also pave the way toward designer cellulosome strategies tailored for P. putida., This work was funded by the SETH Project of the Spanish Ministry of Science RTI 2018-095584-B-C42, the MADONNA (H2020-FET-OPEN-RIA-2017–1–766975), BioRoboost (H2020-NMBP-BIO-CSA-2018), SYNBIO4FLAV (H2020-NMBP/0500) and MIX-UP (H2020-Grant 870294) Contracts of the European Union, and the S2017/BMD-3691 InGEMICS-CM Project of the Comunidad de Madrid (European Structural and Investment Funds) as well as by the Czech Science Foundation (19-06511Y).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Wsp intermembrane complex mediates metabolic control of the swim-attach decision of Pseudomonas putida

  • Hueso-Gil, Angeles
  • Calles, Belén
  • Lorenzo, Víctor de
Pseudomonas putida is a microorganism of biotechnological interest that—similar to many other environmental bacteria—adheres to surfaces and forms biofilms. Although various mechanisms contributing to the swim-attach decision have been studied in this species, the role of a 7-gene operon homologous to the wsp cluster of Pseudomonas aeruginosa—which regulates cyclic di-GMP (cdGMP) levels upon surface contact—remained to be investigated. In this work, the function of the wsp operon of P. putida KT2440 has been characterized through inspection of single and multiple wsp deletion variants, complementation with Pseudomonas aeruginosa's homologues, combined with mutations of regulatory genes fleQ and fleN and removal of the flagellar regulator fglZ. The ability of the resulting strains to form biofilms at 6 and 24 h under three different carbon regimes (citrate, glucose and fructose) revealed that the Wsp complex delivers a similar function to both Pseudomonas species. In P. putida, the key components include WspR, a protein that harbours the domain for producing cdGMP, and WspF, which controls its activity. These results not only contribute to a deeper understanding of the network that regulates the sessile-planktonic decision of P. putida but also suggest strategies to exogenously control such a lifestyle switch., This work was funded by the SETH Project of the Spanish Ministry of Science RTI 2018‐095584‐B‐C42, the MADONNA (H2020‐FET‐OPEN‐RIA‐2017‐1‐766975), BioRoboost (H2020‐NMBP‐BIO‐CSA‐2018), SYNBIO4FLAV (H2020‐NMBP/0500) and MIX‐UP (H2020‐Grant 870294) Contracts of the European Union and the S2017/BMD‐3691 InGEMICS‐CM Project of the Comunidad de Madrid (European Structural and Investment Funds).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MIXed plastics biodegradation and UPcycling using microbial communities: EU Horizon 2020 project MIX-UP started January 2020

  • Ballerstedt, Hendrik
  • Tiso, Till
  • Wierckx, Nick
  • Wei, Ren
  • Avérous, L.
  • Bornscheuer, Uwe T.
  • O'Connor, Kevin
  • Tilman, Floehr
  • Jupke, Andreas
  • Klankermayer, Jürgen
  • Liu, Luo
  • Lorenzo, Víctor de
  • Narancic, Tanja
  • Nogales, Juan
  • Perrin, Rémi
  • Pollet, Eric
  • Prieto, María Auxiliadora
  • Casey, William
  • Haarmann, Thomas
  • Sarbu, Alexandru
  • Schwaneberg, Ulrich
  • Xin, Fengxue
  • Dong, Weiliang
  • Xing, Jiamin
  • Chen, Guo‑Qiang
  • Tan,Tianwei
  • Jiang, Min
  • Blank, Lars M.
9 p.-2 fig., This article introduces the EU Horizon 2020 research project MIX-UP, "Mixed plastics biodegradation and upcycling using microbial communities". The project focuses on changing the traditional linear value chain of plastics to a sustainable, biodegradable based one. Plastic mixtures contain five of the top six fossil-based recalcitrant plastics [polyethylene (PE), polyurethane (PUR), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS)], along with upcoming bioplastics polyhydroxyalkanoate (PHA) and polylactate (PLA) will be used as feedstock for microbial transformations. Consecutive controlled enzymatic and microbial degradation of mechanically pre-treated plastics wastes combined with subsequent microbial conversion to polymers and value-added chemicals by mixed cultures. Known plastic-degrading enzymes will be optimised by integrated protein engineering to achieve high specific binding capacities, stability, and catalytic efficacy towards a broad spectrum of plastic polymers under high salt and temperature conditions. Another focus lies in the search and isolation of novel enzymes active on recalcitrant polymers. MIX-UP will formulate enzyme cocktails tailored to specific waste streams and strives to enhance enzyme production significantly. In vivo and in vitro application of these cocktails enable stable, self-sustaining microbiomes to convert the released plastic monomers selectively into value-added products, key building blocks, and biomass. Any remaining material recalcitrant to the enzymatic activities will be recirculated into the process by physicochemical treatment. The Chinese–European MIX-UP consortium is multidisciplinary and industry-participating to address the market need for novel sustainable routes to valorise plastic waste streams. The project's new workflow realises a circular (bio)plastic economy and adds value to present poorly recycled plastic wastes where mechanical and chemical plastic recycling show limits., This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 870294. In addition, this project is funded by the National Natural Science Foundation of China (Grant Numbers 31961133017, 31961133018, 31961133019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

When microbial biotechnology meets material engineering

  • Hernández-Arriaga, A.M.
  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
15 p.-3 fig.-1 tab., Bacterial biopolymers such as bacterial cellulose (BC), alginate or polyhydroxyalkanotes (PHAs) have aroused the interest of researchers in many fields, for instance biomedicine and packaging, due to their being biodegradable, biocompatible and renewable. Their properties can easily be tuned by means of microbial biotechnology strategies combined with materials science. This provides them with highly diverse properties, conferring them non-native features. Herein we highlight the enormous structural diversity of these macromolecules, how are they produced, as well as their wide range of potential applications in our daily lives. The emergence of new technologies, such as synthetic biology, enables the creation of next-generation-advanced materials presenting smart functional properties, for example the ability to sense and respond to stimuli as well as the capacity for self-repair. All this has given rise to the recent emergence of biohybrid materials, in which a synthetic component is brought to life with living organisms. Two different subfields have recently garnered particular attention: hybrid living materials (HLMs), such as encapsulation or bioprinting, and engineered living materials (ELMs), in which the material is created bottom-up with the use of microbial biotechnology tools. Early studies showed the strong potential of alginate and PHAs as HLMs, whilst BC constituted the most currently promising material for the creation of ELMs., Research on polymer biotechnology at the lab of Auxi Prieto is supported by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreements no. 745737 (Afterlife), no. 760994 (Engicoin),no. 870294 (Mix-Up), no. 814418 (SinFonia) and no. 101000733 (Promicon). At National level, the lab is supported by grants from the Community of Madrid (P2018/NMT4389), the Spanish Ministry of Science and Innovation under research grants BIOCIR (PID2020-112766RB-C21), REVOLUZION (PLEC2021-008188) and the Juan de la Cierva aid of Cristina Campano (FJC2019-040298-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From residues to added-value bacterial biopolymers as nanomaterials for biomedical applications

  • Blanco Parte, Francisco German
  • Hernández, Natalia
  • Rivero-Buceta, Virginia
  • Maestro, Beatriz
  • Sanz, Jesús M.
  • Mato, Aranzazu
  • Hernández-Arriaga, A.M.
  • Prieto, María Auxiliadora
41 p.-4 fig.-5 tab., Bacterial biopolymers are naturally occurring materials comprising a wide range of molecules with diverse chemical structures that can be produced from renewable sources following the principles of the circular economy. Over the last decades, they have gained substantial interest in the biomedical field as drug nanocarriers, implantable material coatings, and tissue-regeneration scaffolds or membranes due to their inherent biocompatibility, biodegradability into nonhazardous disintegration products, and their mechanical properties, which are similar to those of human tissues. The present review focuses upon three technologically advanced bacterial biopolymers, namely, bacterial cellulose (BC), polyhydroxyalkanoates (PHA), and γ-polyglutamic acid (PGA), as models of different carbon-backbone structures (polysaccharides, polyesters, and polyamides) produced by bacteria that are suitable for biomedical applications in nanoscale systems. This selection models evidence of the wide versatility of microorganisms to generate biopolymers by diverse metabolic strategies. We highlight the suitability for applied sustainable bioprocesses for the production of BC, PHA, and PGA based on renewable carbon sources and the singularity of each process driven by bacterial machinery. The inherent properties of each polymer can be fine-tuned by means of chemical and biotechnological approaches, such as metabolic engineering and peptide functionalization, to further expand their structural diversity and their applicability as nanomaterials in biomedicine., The authors thank the Community of Madrid [P2018/NMT4389], the Spanish Ministry of Science, Innovation, and Universities [BiO2017-8344-8-R, PID2019-105126RB-I00], and the European Union’s Horizon 2020 Research and Innovation Programme [grant agreement no 870294 (Mix-Up)] for the financial support of this project. Francisco Blanco is the recipient of a predoctoral grant from the State Program for the Promotion of Talent and Its Employability in R&D&I (PRE-2018-083859) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Desafiando el metabolismo de Rhodospirillum rubrum con monóxido de carbono: crecimiento a altas concentraciones de un gas tóxico

  • Godoy, Manuel S.
  • De Miguel, Santiago R.
  • Prieto, María Auxiliadora
1 p., La bacteria púrpura no del azufre Rhodospirillum rubrum, ha sido ampliamente estudiada por su gran versatilidad metabólica, pudiendo consumir una amplia gama de sustratos como el gas de síntesis (syngas) y ácidos grasos volátiles (VGA), como el acetato. Además, su complejo metabolismo les permite sintetizar bioplásticos (PHB), derivados del licopeno y combustibles (hidrógeno). En el presente trabajo se estudia el crecimiento anaeróbico de esta bacteria en diferentes concentraciones de monóxido de carbono (CO, principal componente del syngas) con acetato como fuente secundaria de carbono, en presencia o ausencia de luz. Como resultado, se observó un crecimiento en luz óptimo entre presiones parciales de CO (ppCO)= 0,2-0,6 bar. Sin embargo, una vez que el CO se consumió completamente, las células entraron en lisis después de unos días. Este fenómeno no se observó a altas concentraciones de CO en las que el mismo no se consumió completamente (ppCOinicial > 0,8 bar). La duración de la fase de adaptación aumentó a mayor ppCO inicial, demostrando los efectos tóxicos del CO. Si bien el acetato se consumió completamente en luz, en oscuridad su concentración final fue inversamente proporcional al CO consumido, demostrando la dependencia de CO como fuente de energía en ausencia de luz y con fuentes de carbono cuyo nivel de reducción es similar al de la biomasa. Estos resultados sugieren que es posible el crecimiento de R. rubrum (y concomitantemente la producción de PHB o licopeno) a altas concentraciones de CO, aunque mejorar la adaptación inicial es crucial para acelerar el proceso., Proyecto Mix Up - Grant agreement No 870294, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Engineering bacteria for the production of tailored bacterial polyesters

  • Prieto, María Auxiliadora
1 p., Environmental pollution due to the widespread consumption of petroleum-based polymers has hastened the development of biodegradable and environmentally friendly materials. Bacterial biopolymers have attracted much attention over the last decade due to their sustainable production,biodegradability and to the fact that their properties can be altered by new technologies such as synthetic and systems biology combined with advanced materials approaches, providing pathways to diversify their structure and functional complexity. This allows expanding the catalogue of available biomaterials beyond that which exists in nature, as well as extending their potential applications. In the context of the Circular Economy, bacteria are able to grow and produce materials of interest from complex carbon sources such as industrial and municipal wastes. It entails developing bioprocesses in order to up-cycle waste into added-value materials with application in numerous industrial sectors (e.g. packaging, biomedicine). Bacteria produce a broad range of polymers as part of their inherent physiology. An example is the family of polyhydroxyalkanoates (PHAs), that are linear, intracellular polyesters of R-3-hydroxyalkanoate units that accumulate in the cytoplasm as hydrophobic inclusions or granules (100-500 nm) coated with a series of granule-associated proteins (GAPs) involved in the PHA metabolism and granule formation. Bacterial cell factories for PHAs production have been extensively reported in the literature over the last three decades.Among them, Pseudomonas putida constitutes an excellent model to study and manipulate PHA biosynthesis from a wide variety of substrates. Different approaches to engineering P. putida for the production of functional PHAs will be discussed., Horizon 2020 # 814418 (Sinfonia project) and 870294 (Mix-Up project). -CAM (P2018/ NMT4389)-BIO2017-83448-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ingeniería metabólica de sistemas para la revalorización de residuos plásticos y lignina en bioplásticos utilizando Pseudomonas putida

  • Manoli, Maria-Tsampika
  • Del Cerro, Carlos
  • Prieto, María Auxiliadora
  • Nogales, Juan
1 p., Superadas las primeras generaciones de biofactorias alimentadas por fuentes de carbono fácilmente hidrolizables, las nuevas generaciones requieren de materias primas que no compitan con procesos agrícolas. En este sentido, la posibilidad de utilizar polímeros naturales como la lignina o sintéticos como plásticos derivados del petróleo, no solo cumple este requerimiento, sino que posibilita la sostenibilidad del proceso a la vez que resuelve problemas medioambientales a escala global. En este trabajo, abordamos este reto mediante la revalorización de metabolitos derivados de la lignina y de tereftalato de polietileno (PET) y el poliuretano (PU) en bioplásticos (Polihidroxialcanoatos, PHA) usando a la bacteria modelo en biotecnología Pseudomonas putida KT2440 usando aproximaciones de ingeniería metabólica de sistemas. En primer lugar, se utilizó el modelo metabólico de P. putida, iJN1411, como plataforma computacional para diseñar una colección de cepas in sílico superproductoras de PHA a partir de metabolitos derivados de la hidrólisis de estos polímeros.Posteriormente, los diseños más prometedores fueron implementados utilizando tecnologías de vanguardia de edición genética y mutagénesis en esta bacteria. Las cepas resultantes mostraron una producción de PHA muy prometedora. Finalmente, la contextualización fenotípica de estas cepas usando el modelo iJN1411 no sólo identificó los cambios metabólicos claves responsables de esta alta producción, sino que sugirió nuevas intervenciones genéticas que incrementaría aún más los rendimientos obtenidos., Agradecemos financiación de los programas Horizonte 2020 de la UE P4SB/no 633962, MixUp/no 870294 y del Ministerio de Economía BIO2017-83448-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Subcellular Architecture of the xyl Gene Expression Flow of the TOL Catabolic Plasmid of Pseudomonas putida mt-2

  • Kim, Juhyun
  • Goñi-Moreno, Ángel
  • de Lorenzo, Victor
Centro de Biotecnología y Genómica de Plantas (CBGP), Despite intensive research on the biochemical and regulatory features of the archetypal catabolic TOL system borne by pWW0 of Pseudomonas putida strain mt-2, the physical arrangement and tridimensional logic of the xyl gene expression flow remains unknown. In this work, the spatial distribution of specific xyl mRNAs with respect to the host nucleoid, the TOL plasmid, and the ribosomal pool has been investigated. In situ hybridization of target transcripts with fluorescent oligonucleotide probes revealed that xyl mRNAs cluster in discrete foci, adjacent but clearly separated from the TOL plasmid and the cell nucleoid. Also, they colocalize with ribosome-rich domains of the intracellular milieu. This arrangement was maintained even when the xyl genes were artificially relocated to different chromosomal locations. The same held true when genes were expressed through a heterologous T7 polymerase-based system, which likewise led to mRNA foci outside the DNA. In contrast, rifampin treatment, known to ease crowding, blurred the confinement of xyl transcripts. This suggested that xyl mRNAs exit from their initiation sites to move to ribosome-rich points for translation-rather than being translated coupled to transcription. Moreover, the results suggest the distinct subcellular motion of xyl mRNAs results from both innate properties of the sequences and the physical forces that keep the ribosomal pool away from the nucleoid in P. putida This scenario is discussed within the background of current knowledge on the three-dimensional organization of the gene expression flow in other bacteria and the environmental lifestyle of this soil microorganism.IMPORTANCE The transfer of information between DNA, RNA, and proteins in a bacterium is often compared to the decoding of a piece of software in a computer. However, the tridimensional layout and the relational logic of the cognate biological hardware, i.e., the nucleoid, the RNA polymerase, and the ribosomes, are habitually taken for granted. In this work, we inspected the localization and fate of the transcripts that stem from the archetypal biodegradative plasmid pWW0 of soil bacterium Pseudomonas putida strain KT2440 through the nonhomogeneous milieu of the bacterial cytoplasm. The results expose that-similarly to computers-the material components that enable the expression flow are well separated physically and they decipher the sequences through a distinct tridimensional arrangement with no indication of transcription/translation coupling. We argue that the resulting subcellular architecture enters an extra regulatory layer that obeys a species-specific positional code and accompanies the environmental lifestyle of this bacterium., This work was funded by the SETH (RTI2018-095584-B-C42 MINECO/FEDER) andSyCoLiM (ERA-COBIOTECH 2018 - PCI2019-111859-2) Projects of the Spanish Ministryof Science and Innovation, the MADONNA (H2020-FET-OPEN-RIA-2017-1-766975),BioRoboost (H2020-NMBP-BIO-CSA-2018-820699), SynBio4Flav (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650), and MIX-UP (MIX-UP H2020-BIO-CN-2019-870294)Contracts of the European Union, and the InGEMICS-CM (S2017/BMD-3691) Project ofthe Comunidad de Madrid-European Structural and Investment Funds (FSE, FECER).A.G.-M. was also supported by grants from Comunidad de Madrid (Atracción deTalento Program, grant 2019-T1/BIO-14053) and the Severo Ochoa Program forCentres of Excellence in R&D from the Agencia Estatal de Investigación of Spain, grantSEV-2016-0672 (2017-2021)., Peer reviewed, 15 Pág.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Automated design and implementation of a NOR gate in Pseudomonas putida, 01 September 2021

  • Tas, Huseyin
  • Grozinger, Lewis
  • Goñi-Moreno, Ángel
  • de Lorenzo, Victor
Centro de Biotecnología y Genómica de Plantas (CBGP), Boolean NOR gates have been widely implemented in Escherichia coli as transcriptional regulatory devices for building complex genetic circuits. Yet, their portability to other bacterial hosts/chassis is generally hampered by frequent changes in the parameters of the INPUT/OUTPUT response functions brought about by new genetic and biochemical contexts. Here, we have used the circuit design tool CELLO for assembling a NOR gate in the soil bacterium and the metabolic engineering platform Pseudomonas putida with components tailored for E. coli. To this end, we capitalized on the functional parameters of 20 genetic inverters for each host and the resulting compatibility between NOT pairs. Moreover, we added to the gate library three inducible promoters that are specific to P. putida, thus expanding cross-platform assembly options. While the number of potential connectable inverters decreased drastically when moving the library from E. coli to P. putida, the CELLO software was still able to find an effective NOR gate in the new chassis. The automated generation of the corresponding DNA sequence and in vivo experimental verification accredited that some genetic modules initially optimized for E. coli can indeed be reused to deliver NOR logic in P. putida as well. Furthermore, the results highlight the value of creating host-specific collections of well-characterized regulatory inverters for the quick assembly of genetic circuits to meet complex specifications., SETH [RTI2018-095584-B-C42; MINECO/FEDER] and SyCoLiM [ERA-COBIOTECH 2018—PCI2019-111859-2] Projects of the Spanish Ministry of Science and Innovation; the MADONNA [H2020-FET-OPEN-RIA-2017-1-766975]; BioRoboost [H2020-NMBP-BIO-CSA-2018-820699]; SynBio4Flav [H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650] and MIX-UP [MIX-UP H2020-BIO-CN-2019-870294] Contracts of the European Union; the InGEMICSCM [S2017/BMD-3691 FSE, FECER] and BioSinT-CM [Y2020/TCS-6555] Projects of the Comunidad de Madrid. A.G.-M. was also supported by the CONTEXT project from Comunidad de Madrid [Atracción de Talento Program; 2019-T1/BIO-14053] and the Severo Ochoa Program for Centres of Excellence in R&D from the Agencia Estatal de Investigación of Spain [SEV-2016-0672] (2017–2021)., Peer reviewed, 6 Pág.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The four Fs of the knowledge-based BioEconomy – A homage to Christian Patermann

  • Lorenzo, Víctor de
Every discourse about the knowledge-based BioEconomy (KBBE) leads to identification of specific products that can be manufactured through advanced biology-based processes in a fashion more environmentally-friendly, more sustainable and more economically appealing than earlier procedures. Such products can be grouped in at least four types of tangible goods, the reference names of each of which—as entertained by Christian Patermann—starting by an F: food, feed, fuel, fibre. Since the first elaborations of the KBBE to the present time, major conceptual developments and scientific technologies have impacted the biotechnological practices and endowed the four Fs with possibilities that were not anticipated at the time. New scenarios have also emerged—paramount among which is climate crisis. In this context, what started as a strategy to backup the existing industrial system might end up being a phenomenal tool for a much needed revision of our mutuality with the natural world., Work in Author’s Laboratory was funded by the SYCOLIM (ERA-COBIOTECH 2018 - PCI2019–111859–2 of MCIN/AEI/10.13039/501100011033/EU) Projects of the Spanish Ministry of Science and Innovation, the MADONNA (H2020-FET-OPEN-RIA-2017–1–766975), SYNBIO4FLAV (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018–814650) and MIX-UP (MIX-UP H2020-BIO–CN-2019–870294) Contracts of the European Union and the InGEMICS-CM (S2017/BMD-3691) and BIOSINT-CM (Y2020/TCS- 6555) Projects of the Comunidad de Madrid - European Structural and Investment Funds (FSE, FECER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Propagation of recombinant genes through complex microbiomes with synthetic mini-RP4 plasmid vectors

  • Aparicio, Tomás
  • Silbert, Jillian
  • Cepeda, Sherezade
  • Lorenzo, Víctor de
The promiscuous conjugation machinery of the Gram-negative plasmid RP4 has been reassembled in a minimized, highly transmissible vector for propagating genetically encoded traits through diverse types of naturally occurring microbial communities. To this end, the whole of the RP4-encoded transfer determinants (tra, mob genes, and origin of transfer oriT) was excised from their natural context, minimized, and recreated in the form of a streamlined DNA segment borne by an autoselective replicon. The resulting constructs (the pMATING series) could be self-transferred through a variety of prokaryotic and eukaryotic recipients employing such a rationally designed conjugal delivery device. Insertion of GFP reporter into pMATING exposed the value of this genetic tool for delivering heterologous genes to both specific mating partners and complex consortia (e.g., plant/soil rhizosphere). The results accredited the effective and functional transfer of the recombinant plasmids to a diversity of hosts. Yet the inspection of factors that limit interspecies DNA transfer in such scenarios uncovered type VI secretion systems as one of the factual barriers that check otherwise high conjugal frequencies of tested RP4 derivatives. We argue that the hereby presented programming of hyperpromiscuous gene transfer can become a phenomenal asset for the propagation of beneficial traits through various scales of the environmental microbiome., This work was funded by the SETH (RTI2018-095584-BC42 of MCIN/AEI/10.13039/501100011033/FEDER) and SYCOLIM (ERA-COBIOTECH 2018-PCI2019-111859-2 of MCIN/AEI/10.13039/501100011033/EU) Projects of the Spanish Ministry of Science and Technology; MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), SYNBIO4FLAV (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650), and MIX-UP (MIX-UP H2020-BIO-CN-2019-870294) Contracts of the European Union; and InGEMICS-CM (S2017/ BMD-3691) and BIOSINT-CM (Y2020/TCS-6555) Projects of the Comunidad de Madrid-European Structural and Investment Funds (FSE, FECER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Standardized Inverter Package Borne by Broad Host Range Plasmids for Genetic Circuit Design in Gram-Negative Bacteria

  • Tas, Huseyin
  • Goñi-Moreno, Ángel
  • de Lorenzo, Victor
Centro de Biotecnología y Genómica de Plantas (CBGP), Genetically encoded logic gates, especially inverters-NOT gates-are the building blocks for designing circuits, engineering biosensors, or decision-making devices in synthetic biology. However, the repertoire of inverters readily available for different species is rather limited. In this work, a large whole of NOT gates that was shown to function previously in a specific strain of Escherichia coli, was recreated as broad host range (BHR) collection of constructs assembled in low, medium, and high copy number plasmid backbones of the SEVA (Standard European Vector Architecture) collection. The input/output function of each of the gates was characterized and parametrized in the environmental bacterium and metabolic engineering chassis Pseudomonas putida. Comparisons of the resulting fluorescence cytometry data with those published for the same gates in Escherichia coli provided useful hints on the portability of the corresponding gates. The hereby described inverter package (20 different versions of 12 distinct gates) borne by BHR plasmids thus becomes a toolbox of choice for designing genetic circuitries in a variety of Gram-negative species other than E. coli., This work was funded by the SETH Project of the Spanish Ministry of Science RTI 2018-095584-B-C42, the MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), BioRoboost (H2020-NMBP-BIO-CSA-2018), SYNBIO4FLAV (H2020-NMBP/0500) and MIX-UP (H2020-Grant 870294) Contracts of the European Union, the S2017/BMD-3691 InGEMICS-CM Project of the Comunidad de Madrid (European Structural and Investment Funds), and the SynBio3D project of the UK Engineering and Physical Sciences Research Council (EP/R019002/1). AG-M was also supported by grants from Comunidad de Madrid (Atracción de Talento Program, grant 2019-T1/BIO-14053) and the Severo Ochoa Program for Centres of Excellence in R&D from the Agencia Estatal de Investigación of Spain, grant SEV-2016-0672 (2017-2021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Contextual dependencies expand the re-usability of genetic inverters

  • Tas, Huseyin
  • Grozinger, Lewis
  • Stoof, Ruud
  • de Lorenzo, Victor
  • Goñi-Moreno, Ángel
The implementation of Boolean logic circuits in cells have become a very active field within synthetic biology. Although these are mostly focussed on the genetic components alone, the context in which the circuit performs is crucial for its outcome. We characterise 20 genetic NOT logic gates in up to 7 bacterial-based contexts each, to generate 135 different functions. The contexts we focus on are combinations of four plasmid backbones and three hosts, two Escherichia coli and one Pseudomonas putida strains. Each gate shows seven different dynamic behaviours, depending on the context. That is, gates can be fine-tuned by changing only contextual parameters, thus improving the compatibility between gates. Finally, we analyse portability by measuring, scoring, and comparing gate performance across contexts. Rather than being a limitation, we argue that the effect of the genetic background on synthetic constructs expands functionality, and advocate for considering context as a fundamental design parameter., This work was funded by the SETH (RTI2018-095584-B-C42) (MINECO/FEDER), SYCOLIM (PCI2019-111859-2 ERA-COBIOTECH 2018) Project of the Spanish Ministry of Science and Innovation. MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), BioRoboost (H2020-NMBP-BIO-CSA-2018/ 820699), SYNBIO4FLAV (H2020-NMBP/0500) and MIX-UP (H2020-Grant 870294) Contracts of the European Union, the InGEMICS-CM (S2017/BMD-3691) Project of the Comunidad de Madrid - European Structural and Investment Funds - (FSE, FECER), and the SynBio3D project of the UK Engineering and Physical Sciences Research Council (EP/R019002/1). G-M was also supported by grants from Comunidad de Madrid (Atracción de Talento Program, grant 2019-T1/BIO-14053) and the Severo Ochoa Program for Centres of Excellence in R&D from the Agencia Estatal de Investigación of Spain, grant SEV-2016-0672 (2017-2021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gaining control of bacterial cellulose colonization by polyhydroxyalkanoate-producing microorganisms to develop bioplasticized ultrathin films

  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Fabra, María José
  • Prieto, María Auxiliadora
Synergistic methodological strategies based on the fields of microbial biotechnology and materials science open up an enormous range of possibilities for the sustainable production of advanced materials with predictable properties. This study shows how naturally produced polyhydroxyalkanoate (PHA) particles are introduced into bacterial cellulose (BC) driven by their bacterial producers. Thanks to an extensive knowledge of the internal structure of BC, it was possible to control the colonization process, i.e. loading and localization of PHA. A subsequent acid treatment favored the PHA-BC bonding at the position reached by the bacteria. These biodegradable films showed improved mechanical and barrier properties even with respect to reference plastic films 8 times thicker, reaching a Young's modulus 4.25 times higher and an oxygen permeability 3 times lower than those of polyethylene terephthalate (PET) films. Owing to the versatility of the method, a wide variety of materials can be developed for very diverse fields of application., Authors want to acknowledge the European Union's Horizon 2020 Research and Innovation Program under the grant agreement no. 870294 (Mix-Up). Authors also received financial support from the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), and the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21), DECOMPACK (PID2020-112766RB-C22) and the Juan de la Cierva aid of Cristina Campano (FJC2019-040298-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metabolic modelling approaches for describing and engineering microbial communities

  • García-Jiménez, Beatriz
  • Torres-Bacete, Jesús
  • Nogales, Juan
21 Pág. Centro de Biotecnología y Genómica de Plantas, Microbes do not live in isolation but in microbial communities. The relevance of microbial communities is increasing due to growing awareness of their influence on a huge number of environmental, health and industrial processes. Hence, being able to control and engineer the output of both natural and synthetic communities would be of great interest. However, most of the available methods and biotechnological applications involving microorganisms, both in vivo and in silico, have been developed in the context of isolated microbes. In vivo microbial consortia development is extremely difficult and costly because it implies replicating suitable environments in the wet-lab. Computational approaches are thus a good, cost-effective alternative to study microbial communities, mainly via descriptive modelling, but also via engineering modelling. In this review we provide a detailed compilation of examples of engineered microbial communities and a comprehensive, historical revision of available computational metabolic modelling methods to better understand, and rationally engineer wild and synthetic microbial communities., This work was supported by the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreements no. 814650 (SynBio4Flav) and 870294 (MixUp) and the‘‘Severo Ochoa Program for Centres of Excellence in R&D” from the Agencia Estatal de Investigación of Spain (grant SEV-2016- 0672 (2017-2021)) to the CBGP. BGJ was supported by a Postdoc toral contract associated to the Severo Ochoa Program. The authors thank Clive A. Dove for critical reading of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzybiotic-mediated antimicrobial functionalization of polyhydroxyalkanoate nanoparticles

  • Blanco Parte, Francisco German
  • Vázquez, Roberto
  • Hernández-Arriaga, A.M.
  • García González, Pedro
  • Prieto, María Auxiliadora
22 p.-5 fig.-1 tab., Background: Increasing antibiotic resistance is depleting the available arsenal of these conventional antimicrobials, thus making the development of alternative antibacterial agents a priority for biomedical research. This is the case for Streptococcus penumoniae, a severe respiratory pathogen which, upon colonization of the lung alveoli below the lung surfactant layer (LS), causes community-acquired pneumonia. One of the alternative approaches is the use of enzybiotics, phage-encoded peptidoglycan hydrolases that degrade the bacterial cell wall, thus leading to their death by osmotic shock. To meet therapeutic parameters such as longer in vivo half-life or targeted activity release, the design of enzybiotic formulations is required. Polyhydroxyalkanoates (PHAs) nanoparticles (NPs), present some ideal properties as biomedical nanocarriers such as their inherent biocompatibility, biodegradability, and ability to be vehiculized through hydrophobic barriers, including the lung surfactant (LS). Here, we develop PHA NPs as a platform for the immobilization of enzybiotics against S. pneumoniae via a minimal PHA affinity tag., Results In this study, we tagged the Cpl-711 enzybiotic, which specifically targets S. pneumoniae, with the minimal PHA affinity peptide MinP, resulting in the M711 protein. Then, a PHA nanoparticulate suspension with adequate physicochemical properties for pulmonary delivery was formulated, and M711 was immobilized on their surface. Finally, we assessed the antipneumococcal activity of the nanosystem against planktonic and sessile forms of the pathogen. The resulting pioneer nanosystem displayed sustained antimicrobial activity against free cells, and effectively disaggregated S. pneumoniae biofilms., Conclusions Our findings indicate tag-mediated immobilization of enzybiotics as an effective method for the antimicrobial functionalization of PHA NPs. This straightforward approach may be extrapolated to other enzybiotics (or cargo proteins) with other specificities, highlighting the versatility of the system., The authors want to acknowledge the European Union's Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up). The authors also received financial support from the CSIC Page 14/22 Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTISusplast+),and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). Francisco G. Blanco is a recipient of (PRE-2018-083859)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SEVA 4.0: an update of the Standard European Vector Architecture database for advanced analysis and programming of bacterial phenotypes

  • Martínez-García, Esteban
  • Fraile, Sofía
  • Algar, Elena
  • Aparicio, Tomás
  • Velázquez, Elena
  • Calles, Belén
  • Tas, Huseyin
  • Blázquez, Blas
  • Martín, Bruno
  • Prieto, Clara
  • Sánchez-Sampedro, Lucas
  • Norholm, Morten H.H.
  • Volke, Daniel C.
  • Wirth, Nicolas T.
  • Dvorak, Pavel
  • Alejaldre, Lorea
  • Grozinger, Lewis
  • Crowther, Matthew
  • Goñi-Moreno, Ángel
  • Nikel, Pablo I.
  • Nogales, Juan
  • de Lorenzo, Victor
10 Pág., The SEVA platform (https://seva-plasmids.com) was launched one decade ago, both as a database (DB) and as a physical repository of plasmid vectors for genetic analysis and engineering of Gram-negative bacteria with a structure and nomenclature that follows a strict, fixed architecture of functional DNA segments. While the current update keeps the basic features of earlier versions, the platform has been upgraded not only with many more ready-to-use plasmids but also with features that expand the range of target species, harmonize DNA assembly methods and enable new applications. In particular, SEVA 4.0 includes (i) a sub-collection of plasmids for easing the composition of multiple DNA segments with MoClo/Golden Gate technology, (ii) vectors for Gram-positive bacteria and yeast and [iii] off-the-shelf constructs with built-in functionalities. A growing collection of plasmids that capture part of the standard-but not its entirety-has been compiled also into the DB and repository as a separate corpus (SEVAsib) because of its value as a resource for constructing and deploying phenotypes of interest. Maintenance and curation of the DB were accompanied by dedicated diffusion and communication channels that make the SEVA platform a popular resource for genetic analyses, genome editing and bioengineering of a large number of microorganisms., The SEVA repository has been developed and maintained with funds of the SYCOLIM [ERA-COBIOTECH 2018-PCI2019-111859-2] Project of the Spanish Ministry of Science and Innovation, SYNBIO4FLAV [H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650]; MIX-UP [MIX-UP H2020-BIO-CN-2019-870294] Contracts of the European Union; BIOSINT-CM [Y2020/TCS-6555] Project of the Comunidad de Madrid-European Structural and Investment Funds (FSE, FECER); P.I.N. acknowledges financial support by the Novo Nordisk Foundation [NNF20CC0035580, TARGET (NNF21OC0067996]; European Union's Horizon 2020 Research and Innovation Programme [814418 (SinFonia)]; M.H.H.N. acknowledges funding by the Novo Nordisk Foundation [NNF20CC0035580]; P.D. was funded by Czech Science Foundation Project 22-12505S; A.G.M. was supported by the Grants BioSinT-CM [Y2020/TCS-6555]; CONTEXT (Atracción de Talento Program) [2019-T1/BIO-14053] Projects of the Comunidad de Madrid, MULTI-SYSBIO [PID2020-117205GA-I00]; Severo Ochoa Program for Centres of Excellence in R&D [CEX2020-000999-S] funded by MCIN/AEI/10.13039/501100011033 and the ECCO (ERC-2021-COG-101044360) Contract of the EU. Funding for open access charge: European Commission Grant SYNBIO4FLAV [H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650]., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020‐000999‐S) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzybiotic-mediated antimicrobial functionalization of polyhydroxyalkanoates

  • Blanco Parte, Francisco German
  • Vázquez, Roberto
  • Hernández-Arriaga, A.M.
  • García González, Pedro
  • Prieto, María Auxiliadora
11 p.-6 fig.-1 tab., Polymeric nanoparticles (NPs) present some ideal properties as biomedical nanocarriers for targeted drug delivery such as enhanced translocation through body barriers. Biopolymers, such as polyhydroxyalkanoates (PHAs) are gaining attention as nanocarrier biomaterials due to their inherent biocompatibility, biodegradability, and ability to be vehiculized through hydrophobic media, such as the lung surfactant (LS). Upon colonization of the lung alveoli, below the LS layer, Streptococcus pneumoniae, causes community-acquired pneumonia, a severe respiratory condition. In this work, we convert PHA NPs into an antimicrobial material by the immobilization of an enzybiotic, an antimicrobial enzyme, via a minimal PHA affinity tag. We first produced the fusion protein M711, comprising the minimized PHA affinity tag, MinP, and the enzybiotic Cpl-711, which specifically targets S. pneumoniae. Then, a PHA nanoparticulate suspension with adequate physicochemical properties for pulmonary delivery was formulated, and NPs were decorated with M711. Finally, we assessed the antipneumococcal activity of the nanosystem against planktonic and biofilm forms of S. pneumoniae. The resulting system displayed sustained antimicrobial activity against both, free and sessile cells, confirming that tag-mediated immobilization of enzybiotics on PHAs is a promising platform for bioactive antimicrobial functionalization., The authors received financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up), the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). FB is a recipient of (PREQ13 2018-083859)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pressure-dependent growth controls 3D architecture of Pseudomonas putida microcolonies

  • Kim, Juhyun
  • de Lorenzo, Victor
  • Goñi-Moreno, Ángel
8 Pág., Colony formation is key to many ecological and biotechnological processes. In its early stages, colony formation involves the concourse of a number of physical and biological parameters for generation of a distinct 3D structure-the specific influence of which remains unclear. We focused on a thus far neglected aspect of the process, specifically the consequences of the differential pressure experienced by cells in the middle of a colony versus that endured by bacteria located in the growing periphery. This feature was characterized experimentally in the soil bacterium Pseudomonas putida. Using an agent-based model we recreated the growth of microcolonies in a scenario in which pressure was the only parameter affecting proliferation of cells. Simulations exposed that, due to constant collisions with other growing bacteria, cells have virtually no free space to move sideways, thereby delaying growth and boosting chances of overlapping on top of each other. This scenario was tested experimentally on agar surfaces. Comparison between experiments and simulations suggested that the inside/outside differential pressure determines growth, both timewise and in terms of spatial directions, eventually moulding colony shape. We thus argue that-at least in the case studied-mere physical pressure of growing cells suffices to explain key dynamics of colony formation., This work was funded by grants BioSinT-CM (Y2020/TCS-6555); CONTEXT (Atraccion de Talento Program) (2019-T1/BIO-14053) Projects of the Comunidad de Madrid—European Structural and Investment Funds (FSE, FECER), MULTI-SYSBIO (PID2020-117205GA I00); Severo Ochoa Program for Centres of Excellence (CEX2020-000999-S) funded by MCIN/AEI/10.13039/501100011033 and the ECCO (ERC-2021-COG101044360), SYNBIO4FLAV (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650), MIX-UP (MIX-UP H2020-BIO-CN-2019-870294) and the NYMPHE (Horizon Europe 2022 GA 101060625) Contracts of the European Union. JK was supported by Kyungpook National University Research Fund 2021, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020‐000999‐S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nature-inspired material binding peptides with versatile polyester affinities and binding strengths

  • Blanco Parte, Francisco German
  • Machatschek, Rainhard
  • Keller, Manuela
  • Hernández-Arriaga, A.M.
  • Godoy, Manuel S.
  • Tarazona, Natalia A.
  • Prieto, María Auxiliadora
14 p.-6 fig.-4 tab., Biodegradable polyesters, such as polyhydroxyalkanoates (PHAs), are having a tremendous impact on biomedicine. However, these polymers lack functional moieties to impart functions like targeted delivery of molecules. Inspired by native GAPs, such as phasins and their polymer-binding and surfactant properties, we generated small material binding peptides (MBPs) for polyester surface functionalization using a rational approach based on amphiphilicity. Here, two peptides of 48 amino acids derived from phasins PhaF and PhaI from Pseudomonas putida, MinP and the novel-designed MinI, were assessed for their binding towards two types of PHAs, PHB and PHOH. In vivo, fluorescence studies revealed selective binding towards PHOH, whilst in vitro binding experiments using the Langmuir-Blodgett technique coupled to ellipsometry showed KD in the range of nM for all polymers and MBPs. Marked morphological changes of the polymer surface upon peptide adsorption were shown by BAM and AFM for PHOH. Moreover, both MBPs were successfully used to immobilize cargo proteins on the polymer surfaces. Altogether, this work shows that by redesigning the amphiphilicity of phasins, a high affinity but lower specificity to polyesters can be achieved in vitro. Furthermore, the MBPs demonstrated binding to PET, showing potential to bind cargo molecules also to synthetic polyesters., This work was financially supported by the European Unio n's Horizon 2020 Research and Innovation Program, grant agreement no. 870294 ( Mix -Up). The authors also received financial support from the CSIC Interdisciplinary Thematic Platform ( PTI+) Sustainable Plastics towards a Circular Economy (PTI -Susplast+), and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). This work was financially supported by the Helmhotlz Association through program-oriented funding . Francisco G . Blanco is the recipient of a predoctoral grant from the State Program for the Promotion of Talent and Its Employability in R & D & I (PRE-2018-083859) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heterologous constitutive production of short-chain-length polyhydroxyalkanoates in Pseudomonas putida KT2440: the involvement of IbpA inclusion body protein

  • Manoli, Maria-Tsampika
  • Blanco Parte, Francisco German
  • Rivero-Buceta, Virginia
  • Kniewel, Ryan
  • Herrera Alarcón, Sandra
  • Salgado-Briegas, Sergio
  • Prieto, María Auxiliadora
18 p.-6 fig.-5 tab., Designing cell factories for the production of novel polyhydroxyalkanoates (PHAs) via smart metabolic engineering is key to obtain à la carte materials with tailored physicochemical properties. To this end, we used the model medium-chain-length-PHA producing bacterium, P. putida KT2440 as a chassis, which is characterized by its metabolic versatility and stress tolerance. Different PHA biosynthetic modules were assembled in expression plasmids using the Golden gate/MoClo modular assembly technique to implement an orthogonal short-chain-lengh-PHA (scl-PHA) switch in a “deaf” PHA mutant. This was specifically constructed to override endogenous multilevel regulation of PHA synthesis in the native strain. We generated a panel of engineered approaches carrying the genes from Rhodospirillum rubrum, Cupriavidus necator and Pseudomonas pseudoalcaligenes, demonstrating that diverse scl-PHAs can be constitutively produced in the chassis strain to varying yields from 23% to 84% PHA/CDW. Co-feeding assays of the most promising engineered strain harboring the PHA machinery from C. necator resulted to a panel of PHBV from 0.6% to 19% C5 monomeric incorporation. Chromosomally integrated PHA machineries with high PhaCCn synthase dosage successfully resulted in 68% PHA/CDW production. Interestingly, an inverse relationship between PhaC synthase dosage and granule size distribution was demonstrated in the heterologous host. In this vein, it is proposed the key involvement of inclusion body protein IbpA to the heterologous production of tailored PHA in P. putida KT2440., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 633962 (P4SB), 814418 (SinFonia) and 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID 2020-112766RB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

À la carte synthesis of polyhydroxyalkanoates using Pseudomonas putida: exploiting the possibilities within the synthetic biology

  • De Miguel, Santiago R.
  • Manoli, Maria-Tsampika
  • Godoy, Manuel S.
  • Prieto, María Auxiliadora
1 p., Bio-based materials are a sustainable alternative for the substitution of oil derived plastics. Within this group we can highlight the polyhydroxyalkanoates (PHAs), biodegradable polymers with similar properties to conventional plastics. The physicochemical properties of the PHA can be tuneable and strongly depends on its hydroxyacids’ monomeric composition1. The synthesis of these PHAs is triggered in many bacteria by a complex regulatory network driven by many factors such as the nutritional imbalance, where the cells experience an excess of carbon coupled with a limitation of other nutrients such as nitrogen. In this study we focus on the model bacterium Pseudomonas putida KT2440 for the production of à la carte PHAs due to its versatile metabolism, resistance to stress, and that naturally produces medium-chain-length-PHA. In order to avoid the complexity of the native regulatory system in this chassis, the entire pha operon was deleted generating the P. putida ∆pha strain, named as PP05_01. Using the Golden Gate technology, a battery of synthetic operons was constructed bearing the minimum set of genes needed for tuneable PHA production in PP05_01. For this, we explored a range of enzymatic set scenarios from different microorganisms (i.e. Rhodospirillum rubrum, Cupriavidus necator, P. putida) producing a panel of PHA with different monomer composition. The most promising candidates were expressed in a multicopy system in PP05_01 strain chassis and the amount and composition of PHA synthesized from various substrates was determined. This study provides P. putida optimized cell factories for the production of tailored PHAs., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21. This study is supported by a “Ayudas para contratos predoctorales para la formación de doctores” fellowship (PRE2021-098281) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

À la carte synthesis of polyhydroxyalkanoates using Pseudomonas putida: exploiting the possibilities within the synthetic biology

  • De Miguel, Santiago R.
  • Manoli, Maria-Tsampika
  • Godoy, Manuel S.
  • Prieto, María Auxiliadora
1 p.-6 fig.-1 tab., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 870294 (MIX-up). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21. This study is supported by a “Ayudas para contratos predoctorales para la formación de doctores” fellowship (PRE2021-098281) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Golden Standard: a complete standard, portable, and interoperative MoClo tool for model and non-model proteobacteria

  • Blázquez, Blas
  • San León, David
  • Torres-Bacete, Jesús
  • Gómez-Luengo, Álvaro
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
16 p.-8 fig.-1 tab.-1 graph.abst., Modular cloning has become a benchmark technology in synthetic biology. However, a notable disparity exists between its remarkable development and the need for standardization to facilitate seamless interoperability among systems. The field is thus impeded by an overwhelming proliferation of organism-specific systems that frequently lack compatibility. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture. GS unlocks modular cloning applications for most bacteria, and delivers combinatorial multi-part assembly to create genetic circuits of up to twenty transcription units (TUs). Reliance on MoClo syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was validated in terms of DNA assembly, portability, interoperability and phenotype engineering in α-, β-, γ- and δ-proteobacteria. Furthermore, we provide a computational pipeline for parts characterization that was used to assess the performance of GS parts. To promote community-driven development of GS, we provide a dedicated web-portal including a repository of parts, vectors, and Wizard and Setup tools that guide users in designing constructs. Overall, GS establishes an open, standardized framework propelling the progress of synthetic biology as a whole., European Union's Horizon 2020 research and innovation program [814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), 870294 (MixUp)]; Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 [AEI /10.13039/501100011033], BIO2017-83448-R and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+); A.G.L. was funded by ‘Fondo Social Europeo’ and ‘Iniciativa de Empleo Juvenil (YEI)’ [PEJ-2020-AI/BIO-18028] and S.S. by a FPU (Ayuda para la formación de profesorado universitario) fellowship [FPU17/03978] from the Spanish Ministry of Universities. Funding for open access charge: Consejo Superior de Investigaciones Científicas (CSIC) [82582328]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A model-driven approach to upcycling recalcitrant feedstocks in Pseudomonas putida by decoupling PHA production from nutrient limitation

  • Manoli, Maria-Tsampika
  • Gargantilla-Becerra, Álvaro
  • Del Cerro, Carlos
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
  • Nogales, Juan
24 p.-7 fig.-1 graph. abst., Bacterial polyhydroxyalkanoates (PHAs) have emerged as promising eco-friendly alternatives to petroleum-based plastics since they are synthesized from renewable resources and offer exceptional properties. However, their production is limited to the stationary growth phase under nutrient-limited conditions, requiring customized strategies and costly two-phase bioprocesses. In this study, we tackle these challenges by employing a model-driven approach to reroute carbon flux and remove regulatory constraints using synthetic biology. We construct a collection of Pseudomonas putida-overproducing strains at the expense of plastics and lignin-related compounds using growth-coupling approaches. PHA production was successfully achieved during growth phase, resulting in the production of up to 46% PHA/cell dry weight while maintaining a balanced carbon-to-nitrogen ratio. Our strains are additionally validated under an upcycling scenario using enzymatically hydrolyzed polyethylene terephthalate as a feedstock. These findings have the potential to revolutionize PHA production and address the global plastic crisis by overcoming the complexities of traditional PHA production bioprocesses., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 633962 (P4SB), 870294 (MIX-up), and 101000733 (PROMICON). We also acknowledge support from the Spanish Ministry of Innovation and Science (AEI/10.13039/501100011033) through projects BIO2017-83448-R_TECMABIO, PID2020-112766RB-C21-BIOCIR, PID2022-139247OB-I00 (Rob3D), and TED2021-130689B-C33 (SyCoSys). Funding was likewise provided by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Designing biopolymers with advanced functional properties

  • Prieto, María Auxiliadora
1 p., The emergence of new technologies, such as synthetic biology, enables the creation of nextgeneration- advanced materials presenting smart functional properties. Among these group, biohybrid materials have recently grown in attention due to the enormous range of possibilities presented by a material that has the functionalities of living cells or simply enzymes supported on a scaffold. Bacterial biopolymers such as bacterial cellulose (BC) and polyhydroxyalkanotes (PHAs) have stood out in thisfield as their properties can be engineered by microbial biotechnology tools through sustainable bioprocesses combined with materials science. Moreover, the fabrication of new formulations based on BC and PHA polymers with complementary characteristics provides them with highly diverse properties, conferring them non-native features [1]. BC, an extracellular biopolymer produced by bacteria of the genus Komagataeibacter spp., shows excellent mechanical performance with a high capacity of retaining water in its nanofibrillar structure that can be controlled by bioprocess engineering. PHAs, intracellular biopolyesters synthetized by bacteria of many genus, highlight by theirhydrophobic character which triggers this material has excellent barrier properties. Designing cell factories for the production of novel PHAs via smart metabolic engineering is key to obtain à la carte materials with tailored monomer composition and thus, customized mechanical and thermal properties. In this work, we used the model mcl-PHA producing bacterium, Pseudomonas putida KT2440 as a chassis, to assemble heterologous PHA biosynthetic modules to implement an orthogonal PHA switch in a chassis specifically constructed to override endogenous multilevel regulation of PHA synthesis in the native strain. The final goal is to design customized materials with compartments of different functionalities involving the complementary use of BC and PHA and carrying active cargos (i.e. enzymes and/or microorganisms). Several strategies will be presented and discussed such as gaining control of bacterial cellulose colonization by PHA-producing microorganisms to develop bioplasticized ultrathin films [2] and the use of biopolymers for enzybiotics delivery [3]., This project receives funding from the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21), the Community of Madrid (P2018/NMT4389) and the European Union s Horizon 2020 research and innovation program (under grants agreement No. EU 101000733 (PROMICON), 870294 (MIX-up) and 814418 (SinFonia))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Can bioplastics always offer a truly sustainable alternative to fossil-based plastics?

  • Serrano-Aguirre, Lara
  • Prieto, María Auxiliadora
10 p.-2 fig.-1 tab., Bioplastics, comprised of bio-based and/or biodegradable polymers, have the potential to play a crucial role in the transition towards a sustainable circular economy. The use of biodegradable polymers not only leads to reduced greenhouse gas emissions but also might address the problem of plastic waste persisting in the environment, especially when removal is challenging. Nevertheless, biodegradable plastics should not be considered as substitutes for proper waste management practices, given that their biodegradability strongly depends on environmental conditions. Among the challenges hindering the sustainable implementation of bioplastics in the market, the development of effective downstream recycling routes is imperative, given the increasing production volumes of these materials. Here, we discuss about the most advisable end-of-life scenarios for bioplastics. Various recycling strategies, including mechanical, chemical or biological (both enzymatic and microbial) approaches, should be considered. Employing enzymes as biocatalysts emerges as a more selective and environmentally friendly alternative to chemical recycling, allowing the production of new bioplastics and added value and high-quality products. Other pending concerns for industrial implementation of bioplastics include misinformation among end users, the lack of a standardised bioplastic labelling, unclear life cycle assessment guidelines and the need for higher financial investments. Although further research and development efforts are essential to foster the sustainable and widespread application of bioplastics, significant strides have already been made in this direction., Authors want to acknowledge the financial support from the CSIC Interdisciplinary Thematic Platform (PTI) Sustainable Plastics towards a Circular Economy (PTI-Susplast), the Spanish Ministry of Science, Innovation and Universities MCIU/AEI/10.13039/501100011033 under the research grant BIOCIR (PID2020-112766RB-C21) and REVOLUZION (PLEC2021-008188/Next Generation EU/PRTR) and European Union's Horizon 2020 Research and Innovation Program, grant agreement no. Mix-UP-870294., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The principle of uncertainty in biology: Will machine learning/artificial intelligence lead to the end of mechanistic studies?

  • de Lorenzo, Víctor
Molecular Biology has long tried to discover mechanisms, considering that unless we understand the principles, we cannot develop applications. Now machine learning and artificial intelligence enable direct leaps to application without understanding the principles. Will this herald a decline in mechanistic studies?, This work was supported by European Union Horizon Programs (MIX-UP H2020-BIO-CN- 2019-870294 and HORIZON-CL6-2021-UE 101060625 to VdL) and by European Structural and Investment Funds (BIOSINT-CM (Y2020/TCS- 6555-CAM to VdL). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Engineering Green-light-responsive Heterologous Gene Expression in Pseudomonas

  • Hueso-Gil, Angeles
  • Calles, Belén
  • de Lorenzo, Victor
12 Pág., Engineering bacterial properties requires precision and fine-tuning for optimal control of the desired application. In consequence, it is essential to accurately turn the function of interest from OFF to ON state and vice versa, avoiding any type of residual activation. For this type of purpose, light switches have revealed a clean and powerful tool in which control does not depend on the addition of chemical compounds that may remain in the media. To reach this degree of directed regulation through light, the switch based on the cyanobacterial two-component system CcaSR system was previously adapted to manipulate Pseudomonas putida for transcription of a gene of interest. In this chapter, we describe how to induce biofilm formation by placing the expression of the c-di-GMP-producing diguanylate cyclase PleD from Caulobacter sp. under the control of the CcaSR system. The regulation through optogenetics accomplished with this protocol promotes higher exploitation of biofilm beneficial features in a cheaper and cleaner way compared to chemical induction., This work was funded by the SETH (RTI2018-095584-B-C42) (MINECO/FEDER) and SyCoLiM (ERA-COBIOTECH 2018 - PCI2019-111859-2) Projects of the Spanish Ministry of Science and Innovation, the MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), BioRoboost (H2020-NMBP-BIO-CSA-2018-820699), SynBio4Flav (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650) and MIX-UP (MIX-UP H2020-BIO-CN-2019-870294) Contracts of the European Union and the InGEMICS-CM (S2017/BMD-3691) Project of the Comunidad de Madrid - European Structural and Investment Funds (FSE, FECER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Golden Standard: A complete standard, portable, and interoperative MoClo tool for model and non-model bacterial hosts

  • Blázquez, Blas
  • Torres-Bacete, Jesús
  • San León, David
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
39 p.-7 fig.-2 tab., Modular cloning assembly has become a benchmark technology in synthetic biology. However, there is a mismatch between its impressive development and the standardization required to promote interoperability between the different systems available. The full development of the field is thus hampered by a surge of oftentimes incompatible organism-specific systems. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture (SEVA). GS unlocks modular cloning applications with any type of microorganism and delivers consistent combinatorial multi-part assembly of standardized genetic elements to create genetic circuits of up to twenty transcription units. Reliance on the Golden Gate syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was fully validated in terms of DNA assembly performance, portability and phenotype engineering in model and non-model bacteria. In order to facilitate the widespread adoption and future community-driven development of GS, we provide a web-portal featuring: i) a repository of parts and vectors, ii) a SBOLHub for exchange and analysis of constructs and iii) Wizard and Setup tools to guide the design of constructs using stored and user-specific parts., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under grant agreements no. 814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), and 870294 (MixUp), the Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 (AEI /10.13039/501100011033), BIO2017-83448-R, and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). SS was supported by a FPU (Ayuda para la formación de profesorado universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In Vivo Sampling of Intracellular Heterogeneity of Pseudomonas putida Enables Multiobjective Optimization of Genetic Devices

  • Hueso-Gil, Angeles
  • Calles, Belén
  • de Lorenzo, Víctor
The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssynbio.3c00009., The inner physicochemical heterogeneity of bacterial cells generates three-dimensional (3D)-dependent variations of resources for effective expression of given chromosomally located genes. This fact has been exploited for adjusting the most favorable parameters for implanting a complex device for optogenetic control of biofilm formation in the soil bacterium Pseudomonas putida. To this end, a DNA segment encoding a superactive variant of the Caulobacter crescendus diguanylate cyclase PleD expressed under the control of the cyanobacterial light-responsive CcaSR system was placed in a mini-Tn5 transposon vector and randomly inserted through the chromosome of wild-type and biofilm-deficient variants of P. putida lacking the wsp gene cluster. This operation delivered a collection of clones covering a whole range of biofilm-building capacities and dynamic ranges in response to green light. Since the phenotypic output of the device depends on a large number of parameters (multiple promoters, RNA stability, translational efficacy, metabolic precursors, protein folding, etc.), we argue that random chromosomal insertions enable sampling the intracellular milieu for an optimal set of resources that deliver a preset phenotypic specification. Results thus support the notion that the context dependency can be exploited as a tool for multiobjective optimization, rather than a foe to be suppressed in Synthetic Biology constructs., This work was funded by SYNBIO4FLAV (H2020-NMBP- TR-IND/H2020-NMBP-BIO-2018-814650), the MIX-UP (MIX-UP H2020-BIO-CN-2019-870294), and the NYNPHE (HORIZON-CL6-2021-UE 101060625) Contracts of the European Union and the BIOSINT-CM (Y2020/TCS-6555) Project of the Comunidad de Madrid�European Structural and Investment Funds (FSE, FECER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Innovation versus novelty in microbial systems

  • de Lorenzo, Víctor
Consejería de Educación e Investigación, Grant/Award Number: BIOSINT-CM (Y2020/TCS- 6555); Horizon 2020 Framework Programme, Grant/Award Numbers: H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650, MIX-UP H2020-BIO-CN-2019-870294; Ministerio de Ciencia y Tecnología, Grant/Award Number: ERA-COBIOTECH 2018 - PCI2019-111859-2 of MCIN/AEI//10.13039/501100011033/EU; Spanish Ministry of Science and Innovation; European Union; Comunidad de Madrid, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Programming bacterial adhesion to functionalized surfaces through cellular display of recombinant nanobodies

  • Fraile, Sofía
  • Veiga, Esteban
  • Lorenzo, Víctor de
  • Martínez-García, Esteban
The use of catalytic surfaces has an enormous biotechnological potential. Surfaces provide a material to localize and concentrate enzymes or even bacterial cells to achieve biological reactions in a more efficient way. A promising approach to specifically direct bacterial attachment to a surface of choice is the induced expression of synthetic adhesins. In this way cells are re-programmed by the adhesin to bind a specific target. Synthetic adhesins are recombinant molecules obtained by the fusion of an autotransporter module to a single-chain nanobody. In this case, the nanobody part acts as the recognition module targeting cells to cognate antigens, functioning as a perfect glue. The protocol described in this chapter aims to explain all steps required to effectively gain the functionality of the system. Specifically, the protocol provides a way to quantify and visualize bacterial immobilization on the modified surface. The methodology is exemplified by Escherichia coli with the use of two well characterized systems: (i) intimin as surface display and a (ii) nanobody that targets fibrinogen as adhesin., This work was funded by SYNBIO4FLAV (H2020-NMBP-TR-IND/H2020-NMBP-BIO-2018-814650), the MIX-UP (MIX-UP H2020-BIO-CN-2019-870294) and the NYMPHE (HORIZON-CL6-2021-UE 101060625) Contracts of the European Union and the BIOSINT-CM (Y2020/TCS-6555) Project of the Comunidad de Madrid—European Structural and Investment Funds (FSE, FECER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bacterial cellulose with CHAPK‑mediated specific antimicrobial activity against Staphylococcus aureus

  • Blanco Parte, Francisco German
  • Campano, Cristina
  • Rivero-Buceta, Virginia
  • Hernández-Arriaga, A.M.
  • Prieto, María Auxiliadora
15 p.-5 fig.-1 tab., Wound healing represents a complex biological process often hampered by bacterial infections, in particular those caused by Staphylococcus aureus, which is already multiresistant to many antibiotics. In this sense, enzybiotics have additional advantages over conventional antibiotics, since they provide pathogen specificity and do not contribute to antibiotic resistance. However, their soluble administration at the wound site would result in enzyme leakage. On the other hand, bacterial cellulose (BC) pellicles present a very promising dressing and scaffold, given its high purity, water retention capacity, and barrier effect in the wound against possible contaminants. In this study, we present a novel approach that incorporates the enzybiotic CHAPK into BC to develop functionalized membranes that exhibit targeted and controlled antimicrobial activity against S. aureus. The kinetic tests revealed a continuous loading of the enzybiotic into BC until it reaches a maximum and a two-stage release process, characterized by an initial fast release followed by a sustained release. Attenuated total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and Confocal Laser Scanning Microscopy (CLSM) confirmed the incorporation and the preferential surface localization of CHAPK within the BC membranes. Finally, the BC/CHAPK materials demonstrated the sustained reduction of up to 4 logarithmic units in the viability of S. aureus. Overall, the biomaterials developed here exhibit promising antimicrobial efficacy against S. aureus, offering a potential strategy for wound management and skin infection control while maintaining unharmed the commensal skin microbiota, which impairment could compromise the integrity of the skin barrier function., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors received financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up), the CSIC Interdisciplinary Thematic Platform (PTI +) Sustainable Plastics towards a Circular Economy (PTI-Susplast +), and the Community of Madrid (P2018/NMT4389), and the Spanish Ministry of Science and Innovation under the research grant BIOCIR (PID2020-112766RB-C21). FGB is a recipient of the grant PRE2018-083859 awarded by the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hints from nature for a PHA circular economy: Carbon synthesis and sharing by Pseudomonas solani GK13

  • Jiménez, José D.
  • Godoy, Manuel S.
  • Del Cerro, Carlos
  • Prieto, María Auxiliadora
15 p.-7 fig.-5 tab., Polyhydroxyalkanoates (PHAs) are a well-known group of biodegradable and biocompatible bioplastics that are synthesised and stored by microorganisms as carbon and energy reservoirs. Extracellular PHA depolymerases (ePhaZs), secreted by a limited range of microorganisms, are the main hydrolytic enzymes responsible for their environmental degradation. Pseudomonas sp. GK13, initially identified as P. fluorescens GK13, produces PHA and a prototypic ePhaZ that specifically degrades mcl-PHA. In this study, a comprehensive characterization of strain GK13 was performed. The whole genomic sequence of GK13 was consolidated into one complete chromosome, leading to its reclassification as P. solani GK13. We conducted a detailed in silico examination of the bacteria genomic sequence, specifically targeting PHA metabolic functions. From the different growth conditions explored, PHA accumulation occurred only under carbon/nitrogen (C/N) imbalance, whereas ePhaZ production was induced even at balanced C/N ratios in mineral media. We extend our study to other bacteria belonging to the Pseudomonas genus revealing that the ePhaZ production capacity is closely associated with mcl-PHA synthesis capacity, as also suggested by metagenomic samples. This finding suggests that these types of microorganisms could contribute to the carbon economy of the microbial community, by storing PHA in carbon-rich times, and sharing it with the rest of the population during times of carbon scarcity through PHA hydrolysis. The conclusion pointed that carbon cycle metabolism performed by P. solani GK13 may contribute to the environmental circular economy at a microscopic scale., Funding Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 870294 (MIX UP), the Ministry of Science, Innovation and Universities: grant BIOCIR (PID2020-112766RB-C21) funded by MICIU/AEI/ 10.13039/501100011033 and the CSIC Interdisciplinary Thematic Platform (PTI) Sustainable Plastics towards a Circular Economy (PTI-Susplast). José D. Jiménez is the recipient of a postdoctoral FPU grant by the Ministry of Science, Innovation and Universities (FPU21/04158)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring biotechnology for plastic recycling, degradation and upcycling for a sustainable future

  • Liu, Xu
  • Park, Helen
  • Ackermann, Yannic Sebastian
  • Avérous, L.
  • Ballerstedt, Hendrik
  • Besenmatter, Werner
  • Blázquez, Blas
  • Bornscheuer, Uwe T.
  • Branson, Yannick
  • Casey, William
  • Lorenzo, Víctor de
  • Dong, Weiliang
  • Tilman, Floehr
  • Godoy, Manuel S.
  • Ji, Yu
  • Jupke, Andreas
  • Klankermayer, Jürgen
  • San León, David
  • Liu, Luo
  • Liu, Xianrui
  • Liu, Yizhi
  • Manoli, Maria-Tsampika
  • Martínez-García, Esteban
  • Narancic, Tanja
  • Nogales, Juan
  • O'Connor, Kevin
  • Osterthun, Ole
  • Perrin, Rémi
  • Prieto, María Auxiliadora
  • Pollet, Eric
  • Sarbu, Alexandru
  • Schwaneberg, Ulrich
  • Su, Haijia
  • Tang, Zequn
  • Tiso, Till
  • Wang, Zishuai
  • Wei, Ren
  • Welsing, Gina
  • Wierckx, Nick
  • Wolter, Birger
  • Xiao, Gang
  • Xing, Jiamin
  • Zhao, Yilin
  • Zhou, Jie
  • Tan,Tianwei
  • Blank, Lars M.
  • Jiang, Min
  • Chen, Guo‑Qiang
52 p.-5 fig.-2 tab., The persistent demand for plastic commodities, inadequate recycling infrastructure, and pervasive environmental contamination due to plastic waste present a formidable global challenge. Recycling, degradation and upcycling are the three most important ways to solve the problem of plastic pollution. Sequential enzymatic and microbial degradation of mechanically and chemically pre-treated plastic waste can be orchestrated, followed by microbial conversion into value-added chemicals and polymers through mixed culture systems. Furthermore, plastics-degrading enzymes can be optimized through protein engineering to enhance their specific binding capacities, stability, and catalytic efficiency across a broad spectrum of polymer substrates under challenging high salinity and temperature conditions. Also, the production and formulation of enzyme mixtures can be fine-tuned to suit specific waste compositions, facilitating their effective deployment both in vitro, in vivo and in combination with chemical technologies. Here, we emphasized the comprehensive strategy leveraging microbial processes to transform mixed plastics of fossil-derived polymers such as PP, PE, PU, PET, and PS, most notably polyesters, in conjunction with potential biodegradable alternatives such as PLA and PHA. Any residual material resistant to enzymatic degradation can be reintroduced into the process loop following appropriate physicochemical treatment., This project was funded by the National Natural Science Foundation of China [Grant numbers 31961133017, 31961133018, 31961133019]. These grants are part of MIX-UP, a joint NSFC and EU H2020 collaboration. In Europe, MIX-UP has received funding from the European Union's Horizon 2020 Research and Innovation Program [grant agreement Number 870294]. JK, OO, and LMB acknowledge support of the Werner Siemens Foundation in the frame of the WSS Research Centre “Catalaix”. AP and JN acknowledge support from CSIC's Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and Synthesis of Hollow Particles Based on Bacterial Cellulose and Polyhydroxybutyrate for Microbial Entrapping Using Coaxial Electrospray Technology

  • Rivero-Buceta, Virginia
  • García-Fernández, Luis
  • Campano, Cristina
  • Hernández-Herreros, Natalia
  • Aguilar, María Rosa
  • Prieto, M. Auxiliadora
The design of biocarriers presents an effective approach for preserving bioactive elements and enabling controlled release in specific environments. This study introduces a novel biocarrier structure composed of two biodegradable, non-toxic, yet inherently incompatible bacterial biopolymers: bacterial cellulose (BC), a hydrophilic porous polymer known for its high water-holding capacity (up to 400 times its dry weight) and tensile strength, and polyhydroxybutyrate (PHB), a hydrophobic polymer characterized by its excellent barrier properties and UV stability. Using a coaxial electrospray technique, double-shelled hollow particles (DSHP) with a spherical architecture and an average diameter of 360 µm were produced. These particles consist of an outer PHB shell that serves as a protective barrier, and an inner BC-based layer designed to support microbial viability. To ensure structural integrity and enhance compatibility between the polymers, PHB chains were grafted onto BC, achieving a modification degree of 31%, prior to electrospraying. The resulting DSHP demonstrated an internal cavity capable of housing bacterial loads up to 108 CFU/mL, maintaining cell viability for at least 2 days and enabling controlled release profile. Additionally, the optimized electrospray conditions ensured high reproducibility and stability. This promising particle configuration offers potential applicability across various fields, from biomedicine to environmental applications., The authors received financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 870294 (Mix-Up), the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Circular Economy (PTI-Susplast+), the Community of Madrid (P2018/NMT4389), and the grants BIOCIR (PID2020-112766RB-C21) and OPENVIRO (PID2023-146557OB-C21) funded by MCIN/AEI/ 10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rational Design Assisted by Evolutionary Engineering Allows (De)Construction and Optimization of Complex Phenotypes in Pseudomonas putida KT2440

  • Blázquez, Blas
  • Nogales, Juan
Beyond the rational construction of genetic determinants to encode target functions, complex phenotype engineering requires the contextualisation of their expression within the metabolic and genetic background of the host strain. Furthermore, wherever metabolic complexity is involved, phenotype engineering demands standard, reliable, plug-and-play tools. We introduce GENIO (GENome Integration and fitness Optimization platform for Pseudomonas putida), a framework to optimise genetic circuit performance by means of (i) chromosome-location-based differential gene expression and (ii) subsequent fitness improvement through evolutionary engineering if needed. Using gene expression strength and cell-to-cell variation, we characterised 10 P. putida chromosomal loci (ppLPS) to show that genome context rather than distance to ORI is the main factor driving differential expression performance. We further contextualised ppLPS gene expression against well-known chromosomal integration sites and plasmids displaying different copy numbers. GENIO supports comprehensive exploration of the gene expression space across P. putida's genome while unlocking performance optimization of complex heterologous metabolic pathways through evolutionary engineering. To demonstrate the usability of GENIO, we restored P. putida's aromatic hydrocarbon metabolism by (de)constructing the toluene/m-xylene catabolic pathway coded in the pWW0 plasmid. We also showed that engineering complex phenotypes requires accurate contextualisation of the synthetic pathways involved, a process that benefits from biological robustness., This research received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement numbers 814650 (SynBio4Flav), 870294 (MIX-UP) and 101000733 (PROMICON), as well as the TED2021-130689B-C33 (SyCoSys) and PID2022-139247OB-I00 (Rob3D) projects funded by MCIN/AEI/10.13039/501100011033 and European Union (Next Generation EU/PRTR) funding, a way to make Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Revealing the essential role of the lid in mclPHA intracellular depolymerase from Pseudomonas putida KT2440

  • de Eugenio, Laura Isabel
  • Jiménez, José Daniel
  • Ramos, Elena
  • Serrano-Aguirre, Lara
  • Sanz, Jesus M.
  • Prieto, M. Auxiliadora
Polyhydroxyalkanoates (PHAs) are microbial polyesters that serve as intracellular carbon reserves and represent promising biodegradable alternatives to conventional plastics. However, their large-scale application requires not only cost-effective production but also efficient strategies for recovery and recycling. Unlike short-chain-length PHAs, which are widely degraded by diverse enzymes, the intracellular degradation of medium-chain-length PHAs (mclPHAs) appears to be a genus-specific trait of Pseudomonas. In this context, thePhaZKT depolymerase from Pseudomonas putida KT2440 is considered a model enzyme for intracellular mclPHA mobilization; it is highly substrate-specific, acting almost exclusively on mclPHAs, and consists of an α/β-hydrolase fold with a lid domain, similar to lipases and other enzymes acting on lipid substrates, in con trast to extracellular PHA depolymerases, which generally lack this lid structure. Here, we explored the essential role of this lid structure through site-directed deletions and random mutagenesis. Targeted deletions within or near the lid completely abolished enzyme activity, highlighting its critical structural and functional importance. Random mutagenesis identified two beneficial variants: S184F, located in the lid hinge region, and G286R, situated in a still unmapped region. The S184F mutant exhibited increased esterase activity on p-nitrophenyl esters but significantly reduced depolymerase activity on mclPHA nanoparticles, indicating that lid integrity and dynamics precisely control substrate specificity and access. Molecular dynamics simulations supported these findings, revealing enhanced rigidity near the lid region in the S184F variant. Conversely, G286R showed substantially improved depolymerase activity toward mclPHA, suggesting alternative regions for beneficial mutations without compromising lid functionality. These results underscore the delicate balance between lid integrity and enzyme performance, offering insights into targeted protein engineering for optimized enzymatic recycling of bioplastics, This study was funded by the European Union’s Horizon 2020 and Horizon Europe research and innovation program under grant agreements no. 870294 (Mix-Up) and no. 101156032 (ReBioCycle), and from the Spanish Ministry of Science, Innovation and Universities MCIU/AEI/https://doi.org/10.13039/501100011033under the research grants SMARTERIAL PID2023-146557OB-C21 and PID2022-139209OB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Protocol for obtaining polyhydroxyalkanoates from microbial cultures: Production, quantification, and analytical assays

  • Manoli, Maria-Tsampika
  • Hernández-Herreros, Natalia
  • Rivero-Buceta, Virginia
  • Rodríguez-Izquierdo, Alberto
  • Prieto, María Auxiliadora
Polyhydroxyalkanoates (PHAs), a family of natural bacterial biodegradable bio polymers, constitute a promising alternative to conventional plastics. Here, we present a protocol to monitor bacterial growth and biopolymer accumulation in shaken flasks using two model bacteria, Pseudomonas putida KT2440 and Cu priavidus necator H16. We also describe steps to achieve high cell-density cul tures in benchtop bioreactors using bioprocess engineering. Typical perfor mance metrics include biomass concentrations of 6.5–7 g cell dry weight (CDW)/L and PHA titers of 4.2–4.5 g/L for P. putida and 3.5 g/L for C. necator. We then detail procedures for downstream processing, assessing monomer composition, and determining its thermal properties., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 760994 (Engicoin), 870294 (MixUp), 101000733 (PROMICON), 101081782 (DeCypher), and 101081776 (AgriLoop) and the European Union and the Circular Bio-based Europe Joint Undertaking grant agreement no. 101156032 (ReBioCycle). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Cir cular Economy (PTI-Susplast), OPENVIRO (PID2023-146557OB-C21), and NOVELPOL (202320E107)., Peer reviewed
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Research data Set de datos (Dataset)

Confocal and fluorescence microscopy files of growing Pseudomonas putida microcolonies

  • Goñi-Moreno, Ángel
<p>Description of the project</p> <p></p> <p>The project aims at describing the formation and development of small bacterial colonies. Our hypothesis is that, along with nutrient and environmental conditions, the physical interactions between bacterial cells help shaping the micro colonies.</p> <p></p> <p>Description of the dataset</p> <p></p> <p>The dataset is divided into three folders, according to different experimental measurements. The first one (termed Fig1) contains the microscopy file where small colonies on a surface start developing from 1 single cell into micro-colonies. The second one (termed Fig2) contains two microscopy files, one that measures the dynamic formation of a colony and the other one that captures the transversal cut features (height, etc) of various segments. The third one contains raw figures taken from microscopy experiments under different agar concentrations.</p> <p><p> <p>1. Methodology</p> <p></p> <p>The growing cells on the agarose pad were recorded at 30 minutes time intervals using a Leica TCS SP5 confocal microscope equipped with a temperature control chamber. This approach allowed us to analyze 3D formation of cellular growth. We also cultivated the cell on the agarose pad overnight, and the growth formation in 2D was explored using an Olympus BX61 instrument. Green fluorescent signals were obtained with filters carrying an excitation laser (488 nm) built in both microscopes.</p>