Skip to main content

APLICACION DE TECNOLOGIAS DE VANGUARDIA PARA LA SINTESIS DE MATERIALES BIOFUNCIONALES BASADOS EN BIOPOLIMEROS BACTERIANOS.

BIO2017-83448-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of leucine zipper-like motifs in the oligomerization of Pseudomonas putida phasins

  • Tarazona, Natalia A.
  • Maestro, Beatriz
  • Revelles, Olga
  • Sanz, Jesús M.
  • Prieto, María Auxiliadora
38 p.-6 fig.-4 fig. supl.-2 tab. supl., Background Phasins are low molecular mass proteins that accumulate strongly in bacterial cells in response to the intracellular storage of polyhydroxyalkanoates (PHAs). Although lacking catalytic activity, phasins are the major components of the surface of the PHA granules and could be potentially involved in the formation of a network-like protein layer surrounding the polyester inclusions. Structural models revealed phasins to possess coiled-coil regions that might be important in the establishment of protein-protein interactions. However, there is not experimental evidence of a coiled-coil mediated oligomerization in these proteins., Methods Structure prediction analyses were used to characterize the coiled-coil motifs of phasins PhaF and PhaI –produced by the model bacterium Pseudomonas putida KT2440-. Their oligomerization was evaluated by biolayer interferometry and the in vivo two-hybrid (BACTH) system. The interaction ability of a series of coiled-coil mutated derivatives was also measured., Results The formation of PhaF and PhaI complexes was detected. A predicted short leucine zipper-like coiled-coil (ZIP), containing “ideal” residues located within the hydrophobic core, was shown responsible for the oligomers stability. The substitution of key residues (leucines or valines) in PhaI ZIP (ZIPI) for alanine reduced by four fold the oligomerization efficiency., Conclusions These results indicate that coiled-coil motifs are essential for phasin interactions. Correct oligomerization requires the formation of a stable hydrophobic interface between both phasins., General Significance Our findings elucidate the oligomerization motif of PhaF and PhaI. This motif is present in most phasins from PHA-accumulating bacteria and offers a potentially important target for modulating the PHA granules stability., This work was supported by the European Union’s Horizon 2020 research and innovation program (nº 633962), the Community of Madrid (P2013/MIT2807), and the Spanish Ministry of the Economy (BIO2017-83448-R and BIO2016-79323-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Genome sequence and characterization of the bcs clusters for the production of nanocellulose from the low pH resistant strain Komagataeibacter medellinensis ID13488

  • Hernández-Arriaga, A.M.
  • Del Cerro, Carlos
  • Urbina, Leire
  • Eceiza, Arantxa
  • Corcuera, Mª Ángeles
  • Retegi, Aloña
  • Prieto, María Auxiliadora
13 p.-5 fig., Komagataeibacter medellinensis ID13488 (formerly Gluconacetobacter medellinensis ID13488) is able to produce crystalline bacterial cellulose (BC) under high acidic growth conditions. These abilities make this strain desirable for industrial BC production from acidic residues (e.g. wastes generated from cider production). To explore the molecular bases of the BC biosynthesis in this bacterium, the genome has been sequenced revealing a sequence of 3.4 Mb containing three putative plasmids of 38.1 kb (pKM01), 4.3 kb (pKM02) and 3.3 Kb (pKM03). Genome comparison analyses of K. medellinensis ID13488 with other cellulose-producing related strains resulted in the identification of the bcs genes involved in the cellulose biosynthesis. Genes arrangement and composition of four bcs clusters (bcs1, bcs2, bcs3 and bcs4) was studied by RT-PCR, and their organization in four operons transcribed as four independent polycistronic mRNAs was determined. qRT-PCR experiments demonstrated that mostly bcs1 and bcs4 are expressed under BC production conditions, suggesting that these operons direct the synthesis of BC. Genomic differences with the close related strain K. medellinensis NBRC 3288 unable to produce BC were also described and discussed., The authors thank for the financial support from the Foundation Domingo Martınez (2015-Area Materiales 2), the Spanish Ministry of Science, Innovation and Universities (MAT2016-76294-R, BIO2017-83448-R), the Community of Madrid (P2013/MIT2807), the Basque Government in the frame of Grupos Consolidados (IT-776-13). L.U. PIF PRE_2014_1_371., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phasin interactome reveals the interplay of PhaF with the polyhydroxyalkanoate transcriptional regulatory protein PhaD in Pseudomonas putida, Running title: PhaF-PhaD interplay

  • Tarazona, Natalia A.
  • Hernández-Arriaga, A.M.
  • Kniewel, Ryan
  • Prieto, María Auxiliadora
15 p.-6 fig.-2 tab, Phasin PhaF, a multifunctional protein associated with the surface of polyhydroxyalkanoate (PHA) granules that also interacts with the nucleoid, contributes significantly to PHA biogenesis in pseudomonads. As a protein present on the surface of PHA granules, PhaF participates in granule stabilization and segregation, whereas its deletion has a notable impact on overall transcriptome, PHA accumulation and cell physiology, suggesting more extensive functions besides solely being a granule structural protein. Here we followed a systematic approach to detect potential interactions of PhaF with other components of the cell, which could pinpoint unexplored functions of PhaF in the regulation of PHA production. We determined the PhaF interactome in Pseudomonas putida KT2440 via pull‐down‐mass spectrometry (PD‐MS) experiments. PhaF complexed with PHA‐related proteins, phasin PhaI and the transcriptional regulator PhaD, interactions that were verified to be direct using in vivo two‐hybrid analysis. The determination of the PHA granule proteome showed that PhaI and three other potential PhaF interacting partners, but not PhaD, were granule‐associated proteins. Analysis of the interaction of PhaF and PhaD with the phaI promoter by EMSA suggested a new role for PhaF in interacting with PhaD and raises new questions on the regulatory system controlling pha gene expression., This work was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 633962 (P4SB), the Community of Madrid (P2013/MIT2807, P2018/NMT4389) and the Spanish Ministry of Science, Innovation and Universities (BIO2017-83448-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering native and synthetic pathways in Pseudomonas putida for the production of tailored polyhydroxyalkanoates, Running headline: Engineering PHA production in P. putida

  • Mezzina, Mariela P.
  • Manoli, Maria-Tsampika
  • Prieto, María Auxiliadora
  • Nikel, Pablo I.
28 p.-6 fig.-1 tab.This article is dedicated to the memory of our colleague, Dr. Shane Kenny, who made significant contributions towards developing bioprocesses for sustainable PHA production. The scientific community is deeply saddened by his untimely demise in 2020., BACKGROUND: Growing environmental concern sparked renewed interest in the sustainable production of (bio)materials that can replace oil-derived goods. Polyhydroxyalkanoates (PHAs) are isotactic polymers that play a critical role in the central metabolism of producer bacteria, as they act as dynamic reservoirs of carbon and reducing equivalents. PHAs continue to attract industrial attention as a starting point towards renewable, biodegradable, biocompatible, and versatile thermoplastic and elastomeric materials. Pseudomonas species have been known for long as efficient biopolymer producers, especially for medium-chain-length PHAs., PURPOSE AND SCOPE: The surge of synthetic biology and metabolic engineering approaches in recent years now offers the possibility of exploiting the untapped potential of Pseudomonas-based cell factories for the production of tailored PHAs. In this article, we provide an overview of the metabolic and regulatory circuits that rule PHA accumulation in P. putida, and we discuss approaches leading to the biosynthesis of novel polymers (e.g. PHAs including non-biological chemical elements in their structures)., CONCLUSION: The potential of novel PHAs to disrupt existing and future market segments is closer to realization than ever before. We conclude the review by pinpointing challenges that currently hinder the wide adoption of bio-based PHAs, and we propose strategies towards programmable polymer biosynthesis from alternative substrates in engineered P. putida strains., This work was supported by grants from The Novo Nordisk Foundation (NNF10CC1016517 and NNF18OC0034818—LiFe), the European Union’s Horizon2020 Research and Innovation Programme under grant agreement No. 814418 (SinFonia) and the Danish Council for Independent Research (SWEET, DFF-Research Project 8021-00039B) to P.I.N. M.M. acknowledges the support of the Novo Nordisk Foundation. We also acknowledge support from the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science, Innovation, and Universities (BIO2017-83448-R) to M.A.P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Providing new insights on the biphasic lifestyle of the predatory bacterium Bdellovibrio bacteriovorus through genome-scale metabolic modeling

  • Herencias, Cristina
  • Salgado-Briegas, Sergio
  • Prieto, María Auxiliadora
  • Nogales, Juan
© 2020 Herencias et al., In this study we analyze the growth-phase dependent metabolic states of Bdellovibrio bacteriovorus by constructing a fully compartmented, mass and charge-balanced genome-scale metabolic model of this predatory bacterium (iCH457). Considering the differences between life cycle phases driving the growth of this predator, growth-phase condition-specific models have been generated allowing the systematic study of its metabolic capabilities. Using these computational tools, we have been able to analyze, from a system level, the dynamic metabolism of the predatory bacteria as the life cycle progresses. We provide computational evidences supporting potential axenic growth of B. bacteriovorus’s in a rich medium based on its encoded metabolic capabilities. Our systems-level analysis confirms the presence of “energy-saving” mechanisms in this predator as well as an abrupt metabolic shift between the attack and intraperiplasmic growth phases. Our results strongly suggest that predatory bacteria’s metabolic networks have low robustness, likely hampering their ability to tackle drastic environmental fluctuations, thus being confined to stable and predictable habitats. Overall, we present here a valuable computational testbed based on predatory bacteria activity for rational design of novel and controlled biocatalysts in biotechnological/clinical applications., This work was supported by the Spanish Ministry of Economy and Competitiveness through the grants BIO2014-59528-JIN (JN), BIO2013-44878-R, and BIO2017-83448-R and H2020 Engicoin no 760994 (MAP). CH was supported by a FPI (Contratos predoctorales para la formación de doctores) fellowship (BES-2014-070856). SSB was supported by a FPU (Ayuda para la formación de profesorado universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Molecular basis of medium-chain length-PHA metabolism of Pseudomonas putida

  • Manoli, Maria-Tsampika
  • Tarazona, Natalia A.
  • Mato, Aranzazu
  • Maestro, Beatriz
  • Sanz, Jesús M.
  • Nogales, Juan
  • Prieto, María Auxiliadora
22 p.-9 fig.-3 tab., This work was supported by funding from the European Union's Horizon 2020 research and innovation program under grant agreement numbers 633962 (P4S project) and 814418 (SinFonia project). We also acknowledge support from the Community of Madrid (P218/NMT4389), Instituto de Saluid Carlos III (CIBER de enfermedades respiratorias), and the Spanish Ministry of Science, Innovation and Universities (BIO2016-79323-R, BIO2017-83448_R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthetic control of metabolic states in Pseudomonas putida by tuning polyhydroxyalkanoate cycle

  • Manoli, Maria-Tsampika
  • Nogales, Juan
  • Prieto, María Auxiliadora
19 p.-9 fig.-1 tab., Polyhydroxyalkanoates (PHAs) are polyesters produced by numerous microorganisms for energy and carbon storage. Simultaneous synthesis and degradation of PHA drives a dynamic cycle linked to the central carbon metabolism, which modulates numerous and diverse bacterial processes, such as stress endurance, pathogenesis, and persistence. Here, we analyze the role of the PHA cycle in conferring robustness to the model bacterium P. putida KT2440. To assess the effect of this cycle in the cell, we began by constructing a PHA depolymerase (PhaZ) mutant strain that had its PHA cycle blocked. We then restored the flux through the cycle in the context of an engineered library of P. putida strains harboring differential levels of PhaZ. High-throughput phenotyping analyses of this collection of strains revealed significant changes in response to PHA cycle performance impacting cell number and size, PHA accumulation, and production of extracellular (R)-hydroxyalkanoic acids. To understand the metabolic changes at the system level due to PHA turnover, we contextualized these physiological data using the genome-scale metabolic model iJN1411. Model-based predictions suggest successive metabolic steady states during the growth curve and an important carbon flux rerouting driven by the activity of the PHA cycle. Overall, we demonstrate that modulating the activity of the PHA cycle gives us control over the carbon metabolism of P. putida, which in turn will give us the ability to tailor cellular mechanisms driving stress tolerance, e.g., defenses against oxidative stress, and any potential biotechnological applications., This research was funded by the European Union’s Horizon 2020 research and innovation program under grant agreement number 633962 (P4SB) and 870294 (MIX-up). We also acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities through projects BIO2017-83448-R_TECMABIO and RobExplode PID2019‐108458RB‐I00 (AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polyhydroxyalkanoate nanoparticles for pulmonary drug delivery: interaction with lung surfactant

  • Cañadas, O.
  • García-García, Andrea
  • Prieto, María Auxiliadora
  • Pérez-Gil, Jesús
17 p.-7 fig., Polyhydroxyalkanoates (PHA) are polyesters produced intracellularly by many bacterial species as energy storage materials, which are used in biomedical applications, including drug delivery systems, due to their biocompatibility and biodegradability. In this study, we evaluated the potential application of this nanomaterial as a basis of inhaled drug delivery systems. To that end, we assessed the possible interaction between PHA nanoparticles (NPs) and pulmonary surfactant using dynamic light scattering, Langmuir balances, and epifluorescence microscopy. Our results demonstrate that NPs deposited onto preformed monolayers of DPPC or DPPC/POPG bind these surfactant lipids. This interaction facilitated the translocation of the nanomaterial towards the aqueous subphase, with the subsequent loss of lipid from the interface. NPs that remained at the interface associated with liquid expanded (LE)/tilted condensed (TC) phase boundaries, decreasing the size of condensed domains and promoting the intermixing of TC and LE phases at submicroscopic scale. This provided the stability necessary for attaining high surface pressures upon compression, countering the destabilization induced by lipid loss. These effects were observed only for high NP loads, suggesting a limit for the use of these NPs in pulmonary drug delivery., Research in the laboratory of the authors is currently funded by grants from the Spanish Ministry of Science, Universities and Innovation (RTI2018-094564-B-I00, BIO2017-83448-R) and the Regional Government of Madrid (P2018/NMT-4389)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From residues to added-value bacterial biopolymers as nanomaterials for biomedical applications

  • Blanco Parte, Francisco German
  • Hernández, Natalia
  • Rivero-Buceta, Virginia
  • Maestro, Beatriz
  • Sanz, Jesús M.
  • Mato, Aranzazu
  • Hernández-Arriaga, A.M.
  • Prieto, María Auxiliadora
41 p.-4 fig.-5 tab., Bacterial biopolymers are naturally occurring materials comprising a wide range of molecules with diverse chemical structures that can be produced from renewable sources following the principles of the circular economy. Over the last decades, they have gained substantial interest in the biomedical field as drug nanocarriers, implantable material coatings, and tissue-regeneration scaffolds or membranes due to their inherent biocompatibility, biodegradability into nonhazardous disintegration products, and their mechanical properties, which are similar to those of human tissues. The present review focuses upon three technologically advanced bacterial biopolymers, namely, bacterial cellulose (BC), polyhydroxyalkanoates (PHA), and γ-polyglutamic acid (PGA), as models of different carbon-backbone structures (polysaccharides, polyesters, and polyamides) produced by bacteria that are suitable for biomedical applications in nanoscale systems. This selection models evidence of the wide versatility of microorganisms to generate biopolymers by diverse metabolic strategies. We highlight the suitability for applied sustainable bioprocesses for the production of BC, PHA, and PGA based on renewable carbon sources and the singularity of each process driven by bacterial machinery. The inherent properties of each polymer can be fine-tuned by means of chemical and biotechnological approaches, such as metabolic engineering and peptide functionalization, to further expand their structural diversity and their applicability as nanomaterials in biomedicine., The authors thank the Community of Madrid [P2018/NMT4389], the Spanish Ministry of Science, Innovation, and Universities [BiO2017-8344-8-R, PID2019-105126RB-I00], and the European Union’s Horizon 2020 Research and Innovation Programme [grant agreement no 870294 (Mix-Up)] for the financial support of this project. Francisco Blanco is the recipient of a predoctoral grant from the State Program for the Promotion of Talent and Its Employability in R&D&I (PRE-2018-083859) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancement of biohydrogen production rate in Rhodospirillum rubrum by a dynamic CO-feeding strategy using dark fermentation

  • Rodríguez, Alberto
  • Hernández‑Herreros, Natalia
  • García, José Luis
  • Prieto, María Auxiliadora
16 p.-5 fig.-6 tab., Background: Rhodospirillum rubrum is a purple non-sulphur bacterium that produces H2 by photofermentation of several organic compounds or by water gas-shift reaction during CO fermentation. Successful strategies for both processes have been developed in light-dependent systems. This work explores a dark fermentation bioprocess for H2 production from water using CO as the electron donor., Results: The study of the influence of the stirring and the initial CO partial pressure (pCO) demonstrated that the process was inhibited at pCO of 1.00 atm. Optimal pCO value was established in 0.60 atm. CO dose adaptation to bacterial growth in fed-batch fermentations increased the global rate of H2 production, yielding 27.2 mmol H2 l−1 h−1 and reduced by 50% the operation time. A kinetic model was proposed to describe the evolution of the molecular species involved in gas and liquid phases in a wide range of pCO conditions from 0.10 to 1.00 atm., Conclusions: Dark fermentation in R. rubrum expands the ways to produce biohydrogen from CO. This work optimizes this bioprocess at lab-bioreactor scale studying the influence of the stirring speed, the initial CO partial pressure and the operation in batch and fed-batch regimes. Dynamic CO supply adapted to the biomass growth enhances the productivity reached in darkness by other strategies described in the literature, being similar to that obtained under light continuous syngas fermentations. The kinetic model proposed describes all the conditions tested., The European Union’s Horizon 2020 research and innovation program under grant agreement no. 679050 (CELBICON), the Community of Madrid (P2018/NMT4389) and the Spanish Ministry of Science, Innovation and Universities (BIO2017-83448-R) supported this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Engineering bacteria for the production of tailored bacterial polyesters

  • Prieto, María Auxiliadora
1 p., Environmental pollution due to the widespread consumption of petroleum-based polymers has hastened the development of biodegradable and environmentally friendly materials. Bacterial biopolymers have attracted much attention over the last decade due to their sustainable production,biodegradability and to the fact that their properties can be altered by new technologies such as synthetic and systems biology combined with advanced materials approaches, providing pathways to diversify their structure and functional complexity. This allows expanding the catalogue of available biomaterials beyond that which exists in nature, as well as extending their potential applications. In the context of the Circular Economy, bacteria are able to grow and produce materials of interest from complex carbon sources such as industrial and municipal wastes. It entails developing bioprocesses in order to up-cycle waste into added-value materials with application in numerous industrial sectors (e.g. packaging, biomedicine). Bacteria produce a broad range of polymers as part of their inherent physiology. An example is the family of polyhydroxyalkanoates (PHAs), that are linear, intracellular polyesters of R-3-hydroxyalkanoate units that accumulate in the cytoplasm as hydrophobic inclusions or granules (100-500 nm) coated with a series of granule-associated proteins (GAPs) involved in the PHA metabolism and granule formation. Bacterial cell factories for PHAs production have been extensively reported in the literature over the last three decades.Among them, Pseudomonas putida constitutes an excellent model to study and manipulate PHA biosynthesis from a wide variety of substrates. Different approaches to engineering P. putida for the production of functional PHAs will be discussed., Horizon 2020 # 814418 (Sinfonia project) and 870294 (Mix-Up project). -CAM (P2018/ NMT4389)-BIO2017-83448-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ingeniería metabólica de sistemas para la revalorización de residuos plásticos y lignina en bioplásticos utilizando Pseudomonas putida

  • Manoli, Maria-Tsampika
  • Del Cerro, Carlos
  • Prieto, María Auxiliadora
  • Nogales, Juan
1 p., Superadas las primeras generaciones de biofactorias alimentadas por fuentes de carbono fácilmente hidrolizables, las nuevas generaciones requieren de materias primas que no compitan con procesos agrícolas. En este sentido, la posibilidad de utilizar polímeros naturales como la lignina o sintéticos como plásticos derivados del petróleo, no solo cumple este requerimiento, sino que posibilita la sostenibilidad del proceso a la vez que resuelve problemas medioambientales a escala global. En este trabajo, abordamos este reto mediante la revalorización de metabolitos derivados de la lignina y de tereftalato de polietileno (PET) y el poliuretano (PU) en bioplásticos (Polihidroxialcanoatos, PHA) usando a la bacteria modelo en biotecnología Pseudomonas putida KT2440 usando aproximaciones de ingeniería metabólica de sistemas. En primer lugar, se utilizó el modelo metabólico de P. putida, iJN1411, como plataforma computacional para diseñar una colección de cepas in sílico superproductoras de PHA a partir de metabolitos derivados de la hidrólisis de estos polímeros.Posteriormente, los diseños más prometedores fueron implementados utilizando tecnologías de vanguardia de edición genética y mutagénesis en esta bacteria. Las cepas resultantes mostraron una producción de PHA muy prometedora. Finalmente, la contextualización fenotípica de estas cepas usando el modelo iJN1411 no sólo identificó los cambios metabólicos claves responsables de esta alta producción, sino que sugirió nuevas intervenciones genéticas que incrementaría aún más los rendimientos obtenidos., Agradecemos financiación de los programas Horizonte 2020 de la UE P4SB/no 633962, MixUp/no 870294 y del Ministerio de Economía BIO2017-83448-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Desarrollo de herramientas genéticas modulares para la domesticación de la bacteria depredadora Bdellovibrio bacteriovorus HD100

  • Salgado-Briegas, Sergio
  • Prieto, María Auxiliadora
1 p., Bdellovibrio bacteriovorus, depredador de otras bacterias Gram-negativas, ha despertado un enorme interés en terapia antimicrobiana y como herramienta lítica para la liberación de productos intracelulares como los bioplásticos o polihidroxialcanoatos. La reciente publicación de su modelo metabólico a escala genómica (iCH455) abre nuevas posibilidades en el estudio de su particular ciclo celular, compuesto por una fase natatoria de ataque a su presa, y una fase intraperiplásmica en la que degrada los componentes celulares de la presa para replicarse. Este modelo permite predecir requerimientos y auxotrofías nutricionales, así como rutas metabólicas incompletas cuya reconstrucción podría reducir dichos requisitos nutricionales o su dependencia de la presa. Sin embargo, a pesar del potencial de B. bacteriovorus, carecemos de herramientas genéticas que nos permitan su domesticación, limitándose principalmente a la interrupción de genes mediante recombinación homóloga y su complementación mediante plásmidos replicativos inestables. En este trabajo, hemos desarrollado plásmidos replicativos en B. bacteriovorus compatibles con el sistema de ensamblado modular GoldenGate-ModularCloning, que nos permite generar librerías genéticas intercambiables para controlar los niveles de expresión de proteínas heterólogas. Debido a las limitaciones de la expresión de proteínas en plásmidos replicativos, por su variable número de copias en B.bacteriovorus, hemos puesto a punto la integración cromosómica mediada por el transposón Tn7, caracterizada por localizarse en un punto concreto del genoma. La inserción en esta región de una proteína fluorescente fusionada a diferentes componentes de una unidad génica (promotores, RBS o terminadores) nos permite determinar rápidamente su influencia en los niveles de expresión y depredación., Este trabajo ha sido financiado gracias a la Ayuda FPU17/03978 y los proyectos H2020 Engicoin 760994 y BIO2017-83448-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Golden Standard: a complete standard, portable, and interoperative MoClo tool for model and non-model proteobacteria

  • Blázquez, Blas
  • San León, David
  • Torres-Bacete, Jesús
  • Gómez-Luengo, Álvaro
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
16 p.-8 fig.-1 tab.-1 graph.abst., Modular cloning has become a benchmark technology in synthetic biology. However, a notable disparity exists between its remarkable development and the need for standardization to facilitate seamless interoperability among systems. The field is thus impeded by an overwhelming proliferation of organism-specific systems that frequently lack compatibility. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture. GS unlocks modular cloning applications for most bacteria, and delivers combinatorial multi-part assembly to create genetic circuits of up to twenty transcription units (TUs). Reliance on MoClo syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was validated in terms of DNA assembly, portability, interoperability and phenotype engineering in α-, β-, γ- and δ-proteobacteria. Furthermore, we provide a computational pipeline for parts characterization that was used to assess the performance of GS parts. To promote community-driven development of GS, we provide a dedicated web-portal including a repository of parts, vectors, and Wizard and Setup tools that guide users in designing constructs. Overall, GS establishes an open, standardized framework propelling the progress of synthetic biology as a whole., European Union's Horizon 2020 research and innovation program [814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), 870294 (MixUp)]; Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 [AEI /10.13039/501100011033], BIO2017-83448-R and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+); A.G.L. was funded by ‘Fondo Social Europeo’ and ‘Iniciativa de Empleo Juvenil (YEI)’ [PEJ-2020-AI/BIO-18028] and S.S. by a FPU (Ayuda para la formación de profesorado universitario) fellowship [FPU17/03978] from the Spanish Ministry of Universities. Funding for open access charge: Consejo Superior de Investigaciones Científicas (CSIC) [82582328]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A model-driven approach to upcycling recalcitrant feedstocks in Pseudomonas putida by decoupling PHA production from nutrient limitation

  • Manoli, Maria-Tsampika
  • Gargantilla-Becerra, Álvaro
  • Del Cerro, Carlos
  • Rivero-Buceta, Virginia
  • Prieto, María Auxiliadora
  • Nogales, Juan
24 p.-7 fig.-1 graph. abst., Bacterial polyhydroxyalkanoates (PHAs) have emerged as promising eco-friendly alternatives to petroleum-based plastics since they are synthesized from renewable resources and offer exceptional properties. However, their production is limited to the stationary growth phase under nutrient-limited conditions, requiring customized strategies and costly two-phase bioprocesses. In this study, we tackle these challenges by employing a model-driven approach to reroute carbon flux and remove regulatory constraints using synthetic biology. We construct a collection of Pseudomonas putida-overproducing strains at the expense of plastics and lignin-related compounds using growth-coupling approaches. PHA production was successfully achieved during growth phase, resulting in the production of up to 46% PHA/cell dry weight while maintaining a balanced carbon-to-nitrogen ratio. Our strains are additionally validated under an upcycling scenario using enzymatically hydrolyzed polyethylene terephthalate as a feedstock. These findings have the potential to revolutionize PHA production and address the global plastic crisis by overcoming the complexities of traditional PHA production bioprocesses., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 633962 (P4SB), 870294 (MIX-up), and 101000733 (PROMICON). We also acknowledge support from the Spanish Ministry of Innovation and Science (AEI/10.13039/501100011033) through projects BIO2017-83448-R_TECMABIO, PID2020-112766RB-C21-BIOCIR, PID2022-139247OB-I00 (Rob3D), and TED2021-130689B-C33 (SyCoSys). Funding was likewise provided by CSIC’s Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy+ (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Golden Standard: A complete standard, portable, and interoperative MoClo tool for model and non-model bacterial hosts

  • Blázquez, Blas
  • Torres-Bacete, Jesús
  • San León, David
  • Kniewel, Ryan
  • Martínez, Igor
  • Sordon, Sandra
  • Wilczak, Aleksandra
  • Salgado, Sergio
  • Huszcza, Ewa
  • Poplonski, Jarosław
  • Prieto, María Auxiliadora
  • Nogales, Juan
39 p.-7 fig.-2 tab., Modular cloning assembly has become a benchmark technology in synthetic biology. However, there is a mismatch between its impressive development and the standardization required to promote interoperability between the different systems available. The full development of the field is thus hampered by a surge of oftentimes incompatible organism-specific systems. To overcome these issues, we present Golden Standard (GS), a Type IIS assembly method underpinned by the Standard European Vector Architecture (SEVA). GS unlocks modular cloning applications with any type of microorganism and delivers consistent combinatorial multi-part assembly of standardized genetic elements to create genetic circuits of up to twenty transcription units. Reliance on the Golden Gate syntax renders GS fully compatible with many existing tools and it sets the path towards efficient reusability of available part libraries and assembled TUs. GS was fully validated in terms of DNA assembly performance, portability and phenotype engineering in model and non-model bacteria. In order to facilitate the widespread adoption and future community-driven development of GS, we provide a web-portal featuring: i) a repository of parts and vectors, ii) a SBOLHub for exchange and analysis of constructs and iii) Wizard and Setup tools to guide the design of constructs using stored and user-specific parts., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under grant agreements no. 814650 (Synbio4Flav), 633962 (P4SB), 814418 (SinFonia), and 870294 (MixUp), the Spanish Ministry of Science and Innovation for the RobExplode project PID2019‐108458RB‐I00 (AEI /10.13039/501100011033), BIO2017-83448-R, and PID2020-112766RB-C21, and CSIC’s Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). SS was supported by a FPU (Ayuda para la formación de profesorado universitario) fellowship (FPU17/03978) from the Spanish Ministry of Universities., Peer reviewed