Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 82
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste

  • Montava-Jorda, Sergi|||0000-0002-5378-0333
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
[EN] This study presents the valorization of cotton waste from the textile industry for the development of sustainable and cost-competitive biopolymer composites. The as-received linter of recycled cotton was first chopped to obtain short fibers, called recycled cotton fibers (RCFs), which were thereafter melt-compounded in a twin-screw extruder with partially bio-based polyethylene terephthalate (bio-PET) and shaped into pieces by injection molding. It was observed that the incorporation of RCF, in the 1¿10 wt% range, successfully increased rigidity and hardness of bio-PET. However, particularly at the highest fiber contents, the ductility and toughness of the pieces were considerably impaired due to the poor interfacial adhesion of the fibers to the biopolyester matrix. Interestingly, RCF acted as an effective nucleating agent for the bio-PET crystallization and it also increased thermal resistance. In addition, the overall dimensional stability of the pieces was improved as a function of the fiber loading. Therefore, bio-PET pieces containing 3¿5 wt% RCF presented very balanced properties in terms of mechanical strength, toughness, and thermal resistance. The resultant biopolymer composite pieces can be of interest in rigid food packaging and related applications, contributing positively to the optimization of the integrated biorefinery system design and also to the valorization of textile wastes., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) through the AGL2015-63855-C2-1-R and MAT2017-84909-C2-2-R program numbers. L.Q.-C. wants to thank the Generalitat Valenciana (GVA) for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812). S.T.-G. is a recipient of a Juan de la Cierva Incorporación contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

NOVEL ELECTROSPUN POLYHYDROXYALKANOATE BASED HIGH BARRIER AND ACTIVE BIOPAPERS OF INTEREST IN FOOD PACKAGING

  • Cherpinski Correa, Adriane
[ES] La presente tesis doctoral tuvo como objetivo desarrollar nuevos materiales biodegradables hechos a base de fibras obtenidas mediante la técnica de electroestirado, denominadas "biopapers" o biopapeles, con barrera a agua y a gases y propiedades de secuestro de oxígeno para su posible aplicación en recubrimientos de papel o como capas intermedias en envases alimentarios basados en papel y cartón. En un primer estudio, se desarrollaron biopapeles de PHB mediante electroestirado, usando dos tipos de colectores, colectores de placa plana y rotativo, para evaluar la influencia del alineamiento de las fibras. Con posterioridad se aplicó un tratamento de recocido por debajo del punto de fusión del polímero a diferentes temperaturas, tiempos y procesos de enfriamiento para obtener películas continuas por coalescencia de las fibras, lo que a su vez condujo a la adhesión entre capas, y a una mejora en las propriedades barrera y ópticas. En un segundo estudio, se depositaron biopapeles monocapa y multicapa hechos de PHB, PVOH y PLA sobre un sustrato de papel no estucado, utilizando los dos colectores citados; y el tiempo de procesamiento por electrospinning se varió para producir espesores diferentes. Para mejorar la adhesión al sustrato de papel, y las propiedades ópticas y de barrera de las multicapas, los biopapeles se sometieron a un proceso de recocido como se describe y optimiza en el primer estudio. Con respecto a la barrera al agua, el sistema de papel/ PVOH/PHB presentó las mejores propriedades. En un tercer estudio, se obtuvieron dos nanopapeles de alta barrera hechos a base de nanofibras de celulosa de dos tipos, nanofibras de celulosa (CNF) y nanofibras de lignocelulosa (LCNF) y se recubrieron con biopapeles de PHA electroestirados con barrera a agua. Como resultado, el carácter hidrófobo de los nanopapeles se mejoró significativamente. Por otra parte, estos también exhibieron un rendimiento mecánico más equilibrado. En un cuarto estudio, se desarrollaron biopapeles de PHA con capacidad activa de secuestro de oxígeno, para lo cual se usaron nanopartículas de paladio (PdNP) como catalizadores de la respuesta activa. La principal dificultad asociada con las nanopartículas es mantenerlas dispersas, por lo que en este trabajo evaluamos el uso de surfactantes CTAB y TEOS como sustancias permitidas en contacto con alimentos para ayudar a la dispersión y distribución de PdNP dentro de las fibras de PHA. Como resultado, se prepararon nanocompuestos electroestirados con capacidad de secuestro de oxígeno hechos de PHB y PdNP, seguidos de un tratamiento de recocido para obtener capas continuas y autoadhesivas. La capacidad de secuestro de oxígeno de los biopapeles, medida a un 100% de humedad relativa (HR), mostró un mejor rendimento para el material en forma de fibra que en forma de film. En cualquier caso, los resultados indicaron una cinética de absorcion relativamente baja. Con el fin de mejorar aún más la cinética de secuestro de oxígeno, incluso a una humedad intermedia y en forma de película, un quinto estudio, desarrolló biopapeles multicapa hechos de PCL y PHA aplicados sobre papel no estucado. Los nanocompuestos de PCL/PdNP mostraron uma cinética de secuestro de oxígeno mucho mayor que la del sistema PHA / PdNP anterior. Este resultado se atribuye a la mayor fración de volumen libre del PCL que permite que la humedad, el hidrógeno y la permeación de oxígeno desencadenen la reacción de eliminación catalítica de forma más eficiente. Finalmente, un sexto estudio, desarrolló un nuevo concepto de capa con capacidad de secuestro de oxígeno y con alta barrera passiva a gases y vapores orgánicos basado en PdNP, CNC y EVOH. Así, CNC y CNC oxidado com TEMPO (TEMPO oxidized CNC), se utilizaron para producir PdNP in situ sobre el nanorefuerzo, que se incorporaron en la matriz del polímero EVOH. El TEMPO oxidized CNC demostró poseer una mayor absorción de oxígeno debido a los grupos car, [CA] La present tesi doctoral va tindre com a objectiu desenvolupar noves capes biodegradables actives obtingudes mitjançant electrospinning, denominades "biopapers" o biopapeles, amb barrera a aigua i a gasos i propietats de segrest d'oxigen per a la seua possible aplicació en recobriments de paper o com a capes intermèdies en envasos alimentaris basats en paper i cartó. En un primer estudi, es van desenvolupar bio-papers de PHB mitjançant electrospinning, utilitzant dos tipus de col·lectors, col·lectors de placa plana i rotatiu, per a avaluar la influència de l'alineament de les fibres. Amb posterioritat es va aplicar un tractament de recuita per davall del punt de fusió del polímer a diferents temperatures, temps i processos de refredament per a obtenir pel·lícules contínues per coalescència de les fibres, la qual cosa al seu torn va conduir a l'adhesió entre capes, i a una millora en les propietats barrera i òptiques. En un segon estudi, es van depositar bio-papers monocapa i multicapa fets de PHB, PVOH i PLA sobre un substrat de paper no estucat, utilitzant els dos col·lectors citats; i el temps de processament per electrospinning es va variar per a produir grossàries diferents. Per a millorar l'adhesió al substrat de paper, i les propietats òptiques i de barrera de les multicapes, els biopapers es van sotmetre a un procés de recuita com es descriu i optimitza en el primer estudi. Respecte a la barrera a l'aigua, el sistema de paper/PVOH/PHB va presentar les millors propietats. En un tercer estudi, es van obtenir dos nano-papers d'alta barrera fets a base de nanofibres de cel·lulosa de dos tipus, nanofibres de cel·lulosa (CNF) i nanofibres de lignocel·lulosa (LCNF) i es van recobrir amb bio-papers de PHA electro-estirats amb barrera a aigua. Com a resultat, el caràcter hidròfob dels nano-papers es va millorar significativament. D'altra banda, aquests també van exhibir un rendiment mecànic més equilibrat. En un quart estudi, es van desenvolupar bio-papers de PHA amb capacitat activa de segrest d'oxigen, per a això es van usar nanopartícules de pal·ladi (PdNP) com a catalitzadors de la resposta activa. La principal dificultat associada amb les nanopartícules és mantenir-les disperses, per la qual cosa en aquest treball avaluem l'ús de surfactants CTAB i TEOS com a substàncies permeses en contacte amb aliments per a ajudar la dispersió i distribució de PdNP dins de les fibres de PHA. Com a resultat, es van preparar nano-compostos electro-estirats amb capacitat de segrest d'oxigen fets de PHB i PdNP, seguits d'un tractament de recuita per a obtenir capes contínues i autoadhesives. La capacitat de segrest d'oxigen dels bio-papers, mesurada a un 100% d'humitat relativa (HR), va mostrar un millor rendiment per al material en forma de fibra que en forma de film. En qualsevol cas, els resultats van indicar una cinètica de absorció relativament baixa. Amb la finalitat de millorar encara més la cinètica de segrest d'oxigen, fins i tot a una humitat intermèdia i en forma de pel·lícula, un cinquè estudi, va desenvolupar bio-papers multicapa fets de PCL i PHA aplicats sobre paper no estucat. Els nano-compostos de PCL/PdNP van mostrar una cinètica de segrest d'oxigen molt major que la del sistema PHA/PdNP anterior. Aquest resultat s'atribueix a la major fracció de volum lliure del PCL que permet que la humitat, l'hidrogen i la permeància d'oxigen desencadenen la reacció d'eliminació catalítica de forma més eficient. Finalment, un sisè estudi, va desenvolupar un nou concepte de capa amb capacitat de segrest d'oxigen i amb alta barrera passiva a gasos i vapors orgànics basat en PdNP, CNC i EVOH. Així, CNC i CNC oxidat com TEMPO (TEMPO oxidat CNC), es van utilitzar per a produir PdNP in situ sobre el nano-reforç, que es van incorporar en la matriu del polímer EVOH. El TEMPO oxidat CNC va demostrar posseir una major absorció d'oxigen degut als grups carboxílics generats., [EN] The present PhD thesis aimed to develop novel active fiber based biodegradable layers obtained by electrospinning, so-called biopapers, with water and gas barrier and oxygen scavenging properties for their potential use as paper coatings or packaging interlayers in fiber based packaging. In a first study, PHB biopapers were obtained by electrospinning, by means of two types of collectors namely, flat plate and rotation drum collectors, to evaluate the influence of the alignment of fibers. Annealing post-processing below the polymer melting point was carried at different temperatures, isothermal times and cooling processes to obtain transparent and pore free continuous films by fibers coalescence which in turn led to interlayer adhesion, enhanced barrier and optical properties. In a second study, mono and multilayer biopapers comprising PHB, PVOH and PLA were deposited onto a conventional uncoated paper substrate, using the cited two collectors; and the electrospinning processing time was varied to produce different thickneses. To enhance adhesion to the paper substrate, optical and barrier performance of the multilayer, the biopapers were subjected to an annealed process as described and optimized in the first study. Regarding water barrier, the system paper/PVOH/PHB presented the highest barrier performance. In a third study, environmentally friendly materials such as cellulose based nanopapers, i.e. gas barrier layers made of cellulose nanofibrils (CNFs) and lignocellulose nanofibrils (LCNFs), were obtained and coated with the water barrier electrospun PHA biopapers. As a result, the hydrophobic character of the nanopapers was significantly improved by the electrospun biopapers. Moreover, these also exhibited a more balanced mechanical performance. In a fourth study, active oxygen scavenging PHA biopapers were developed, in which palladium nanoparticles (PdNP) were used as catalysts to scavenge oxygen from the headspace. The main difficulty associated with nanoparticles is to keep them dispersed, so in this work we assessed the use of CTAB and TEOS surfactants as food contact permitted substances to help dispersion and distribution of the PdNP within the PHA fibers. As a result, oxygen scavenging nanocomposite biopapers made of electrospun PHB and PdNP were prepared, followed by annealing treatment to obtain homogeneous and continuous active layers. The oxygen scavenging capacity at 100% relative humidity (RH) of the biopapers in fiber form showed better performance than their annealed specimens as expected, but in general this was not considered optimal. In order to improve further the oxygen scavenging capacity, even at a low relative humidity and in film form, a fifth study, developed multilayered biopapers made of PCL and PHA coated on conventional cellulose paper. The PCL/PdNP nanocomposites showed much more enhanced oxygen scavenging performance in comparison with the above PHA/PdNP system. This result is attributed to the higher fractional free volume of the PCL polymer that allows moisture, hydrogen and oxygen permeation to trigger the catalytic scavenging reaction. Finally, a sixth study, developed a solvent casting high gas barrier and active oxygen scavenging layer concept based on PdNP, CNC and EVOH. Thus, CNC and TEMPO oxidized CNC, were used to produce in situ PdNP, which were incorporated into the EVOH polymer matrix. The TEMPO oxidized CNC exhibited higher oxygen absorption due to the generated carboxylic groups., Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R for financial support. A. Cherpinski also would like to thank the Brazilian Council for Scientific and Technological Development (CNPq) of Brasilian Government for her predoctoral grant (205955/2014-2). A. Cherpinski also acknowledges the European Cooperation in Science and Technology (COST) Action FP1405 for funding through a Short Term Scientific Mission (STSM)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dragon&apos, s Blood Sap: Storage Stability and Antioxidant Activity

  • Escobar, Juan D.
  • Prieto, Cristina
  • Pardo-Figuerez, Maria
  • Lagaron, José M.
[EN] Currently, consumers are demanding additive-free, fresher, and more-natural products. Dragon's Blood Sap (DBS), the deep red latex of the specie of tree Croton lechleri (Müll. Arg.), contains a high concentration of phenolic compounds of great interest for the food, pharmaceutical, and cosmetic industries. These chemical compounds are highly susceptible to degradation. Therefore, DBS storage stability and its photo-oxidation was studied by Fourier transform infrared spectroscopy (FT-IR) and UV-Vis spectrophotometry for 39 days at different temperatures (4¿21 °C) and relative humidities (0¿56%), as well as under UV light exposure. It was observed that the degradation of phenolic compounds was reduced at 0% relative humidity (RH), not showing a significant effect of temperature in the range studied. UV light irradiation degraded DBS in a 20%. DBS has an exceptional high and stable antioxidant content (¿93% inhibition percentage of DPPH), which makes it a unique property to consider the DBS as an antioxidant agent or ingredient for consumer products formulations., This research was funded by MINECO grant numbers [AGL2015-63855-C2-1-R and DI-14-6906]. J.D. Escobar thanks to the Spanish Ministry of Economy, Industry and Competitivity, for the pre-doctoral grant (DI-14-6906).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrospun Oxygen Scavenging Films of Poly(3-hydroxybutyrate) Containing Palladium Nanoparticles for Active Packaging Applications

  • Cherpinski, Adriane
  • Gozutok, Melike
  • Turkoglu Sasmazel, Hilal
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This paper reports on the development and characterization of oxygen scavenging films made of poly(3-hydroxybutyrate) (PHB) containing palladium nanoparticles (PdNPs) prepared by electrospinning followed by annealing treatment at 160 degrees C. The PdNPs were modified with the intention to optimize their dispersion and distribution in PHB by means of two different surfactants permitted for food contact applications, i.e., hexadecyltrimethylammonium bromide (CTAB) and tetraethyl orthosilicate (TEOS). Analysis of the morphology and characterization of the chemical, thermal, mechanical, and water and limonene vapor barrier properties and the oxygen scavenging capacity of the various PHB materials were carried out. From the results, it was seen that a better dispersion and distribution was obtained using CTAB as the dispersing aid. As a result, the PHB/PdNP nanocomposites containing CTAB provided also the best oxygen scavenging performance. These films offer a significant potential as new active coating or interlayer systems for application in the design of novel active food packaging structures., This research has received funding from the Spanish Ministry of Economy and Competitiveness (MINECO, project AGL2015-63855-C2-1-R) and the EU H2020 project YPACK (reference number 773872). A.C. and S.T.-G. would like to thank the Brazilian Council for Scientific and Technological Development (CNPq) and MINECO for her predoctoral grant (205955/2014-2) and his Juan de la Cierva contract (IJCI-2016-29675), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of different compatibilizers on injection-molded green composite pieces based on polylactide filled with almond shell flour

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Carbonell-Verdu, A.
[EN] Green composites made of polylactide (PLA) filled with almond shell flour (ASF) at a constant weight content of 25¿wt.-% were manufactured by injection molding. In order to increase the interfacial adhesion between the biopolymer and the lignocellulosic fillers, three different compatibilizers were tested, namely multi-functional epoxy-based styrene-acrylic oligomer (ESAO), aromatic carbodiimide (AC), and maleinized linseed oil (MLO). The effect of each compatibilizer on the thermal, mechanical, and thermomechanical properties and water uptake of the injection-molded PLA/ASF pieces was analyzed. The obtained results indicated that all the here-studied compatibilizers had a positive influence on both the thermal stability and the mechanical and thermomechanical performance of the green composite pieces but low impact on their water uptake profile. In addition, the morphological analysis performed at the fracture surfaces of the green composite pieces revealed that the filler¿matrix gap was substantially reduced. Among the tested compatibilizers, ESAO and MLO yielded the highest performance in terms of mechanical strength and ductility, respectively. In the case of MLO, it also offers the advantage of being a plant-derived additive so that its application in green composites positively contributes to the development of sustainable polymer technologies., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) program number MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R and Generalitat Valenciana (GV) program number GV/2014/008. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia (UPV) for his FPI grant. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports (MECD) for his FPU grant (FPU13/06011). L. Quiles-Carrillo also wants to thank GV for his FPI grant (ACT/2016/182) and the MECD for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Compatibilized Polyamide 1010/Coconut Fibers Composites by Reactive Extrusion with Modified Linseed Oil and Multi-functional Petroleum Derived Compatibilizers

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Puglia, D.
  • Dominici, F.
  • Torre, L.
[EN] This work reports the preparation and characterization of fully bio-based polymer composites with coconut fibers (CFs) as an alternative to wood-plastic composites (WPCs), typically based on petroleum derived materials. Polyamide 1010 (PA1010) was melt-extruded with 20 wt% of CFs and, after that, shaped into pieces by injection molding. Four different multi-functionalized compatibilizers were tested to increase the polymer-fiber interactions with the subsequent improvement on toughness. These consisted of two chemically modified vegetable oils, namely maleinized and epoxidized linseed oil (MLO and ELO) respectively, and two commercial additives derived from petroleum and based on glycidyl functionality, that is, low-functionality epoxy-based styrene-acrylic oligomer (ESAO) and polystyrene-glycidyl methacrylate random copolymer (PS-GMA). The addition of all four compatibilizers improved both the mechanical and thermomechanical properties of the composites, thus resulting in high-performance composite materials with relatively low water uptake. Furthermore, the morphology of the obtained composites revealed an extraordinary embedment of the fibers into the biopolymer matrix, which plays a crucial role in improving toughness. Among all the tested compatibilizers, those derived from vegetable oils can be considered the most interesting ones due to they offer a more sustainable solution., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. Quiles-Carrillo and Torres-Giner are recipients of a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) and a Juan de la Cierva contract (IJCI-2016-29675) from MICIU, respectively. The microscopy services at UPV are acknowledged for their help in collecting and analyzing FESEM images. The authors thank Polyscope for kindly supplying Xibond (TM) 920 for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of the processing window and performance of polyamide 1010/bio-based high-density polyethylene blends by melt mixing with natural additives

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This work reports the enhancement of the processing window and the mechanical and thermal properties of biopolymer blends of polyamide 1010 (PA1010) and bio-based high-density polyethylene (bio-HDPE) at 70/30 (wt/wt) achieved by means of natural additives. The overall performance of the binary blend melt-mixed without additives was poor due to both the relatively low thermal stability of bio-HDPE at the processing temperatures of PA1010, that is, 210¿240 ºC, and the lack or poor miscibility between the two biopolymers. Gallic acid (GA), a natural phenolic compound, was added at 0.8 parts per hundred resin (phr) of biopolymer blend to enhance the thermal stability of the green polyolefin and therefore enlarge the processing window of the binary blend. Maleinized linseed oil (MLO), a multi-functionalized vegetable oil, was then incorporated at 5 phr to compatibilize the biopolymers and its performance was also compared with that of a conventional petroleum-derived copolymer, namely, poly(ethylene-co-acrylic acid) (PE-co-AA). The resultant biopolymer blends showed a remarkable enhancement in the thermal stability and also improved toughness when both natural additives were combined. This work can potentially serve as a sound base study for the mechanical recycling of similar blends based on bio-based but non-biodegradable polymers., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. LQ-C and ST-G are recipients of an FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) and a Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) from MICIU, respectively. The microscopy services at Universitat Politecnica de Valencia (UPV) are acknowledged for their help in collecting and analysing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antibacterial and Barrier Properties of Gelatin Coated by Electrospun Polycaprolactone Ultrathin Fibers Containing Black Pepper Oleoresin of Interest in Active Food Biopackaging Applications

  • Figueroa-López, Kelly Johana
  • Castro-Mayorga, Jinneth Lorena
  • Andrade-Mahecha, Maragarita María
  • Cabedo, Luis
  • Lagaron, José María
[EN] The present study evaluated the effect of using electrospun polycaprolactone (PCL) as a barrier coating and black pepper oleoresin (OR) as a natural extract on the morphology, thermal, mechanical, antimicrobial, oxygen, and water vapor barrier properties of solvent cast gelatin (GEL). The antimicrobial activity of the developed multilayer system obtained by the so-called electrospinning coating technique was also evaluated against Staphylococcus aureus strains for 10 days. The results showed that the multilayer system containing PCL and OR increased the thermal resistance, elongated the GEL film, and significantly diminished its permeance to water vapor. Active multilayer systems stored in hermetically closed bottles increased their antimicrobial activity after 10 days by inhibiting the growth of Staphylococcus aureus. This study demonstrates that addition of electrospun PCL ultrathin fibers and OR improved the properties of GEL films, which promoted its potential use in active food packaging applications., The authors would like to thank the Unidad Asociada IATA-UJI "Plastics Technology", the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, and the H2020 EU project YPACK (reference number 773872) for funding. Kelly J. Figueroa-Lopez is a recipient of a Grisolia (Ref. 0001426013N810001A201) research contract of the Valencian Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the Influence of the Reprocessing Cycles on the Final Properties of Polylactide Pieces Obtained by Injection Molding

  • Agüero, Ángel
  • Morcillo, Maria del Carmen
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] This research work aims to study the influence of the reprocessing cycles on the mechanical, thermal, and thermomechanical properties of polylactide (PLA). To this end, PLA was subjected to as many as six extrusion cycles and the resultant pellets were shaped into pieces by injection molding. Mechanical characterization revealed that the PLA pieces presented relatively similar properties up to the third reprocessing cycle, whereas further cycles induced an intense reduction in ductility and toughness. The effect of the reprocessing cycles was also studied by the changes in the melt fluidity, which showed a significant increase after four reprocessing cycles. An increase in the bio-polyester chain mobility was also attained with the number of the reprocessing cycles that subsequently favored an increase in crystallinity of PLA. A visual inspection indicated that PLA developed certain yellowing and the pieces also became less transparent with the increasing number of reprocessing cycles. Therefore, the obtained results showed that PLA suffers a slight degradation after one or two reprocessing cycles whereas performance impairment becomes more evident above the fourth reprocessing cycle. This finding suggests that the mechanical recycling of PLA for up to three cycles of extrusion and subsequent injection molding is technically feasible., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. L. Quiles-Carrillo wants to thank GV for his FPI grant (ACIF/2016/182) and MECD for his FPU grant (FPU15/03812). D. Lascano wants to thank UPV for the grant received through the PAID-01-18 program. S. Torres-Giner is recipient of a Juan de la Cierva¿ Incorporación contract (IJCI-2016-29675) from MICIU. Microscopy services at UPV are acknowledged for their help in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Sammon, C.
[EN] Highly sustainable composites were produced by melt compounding polylactide (PLA) with almond shell flour (ASF), a processed by-product of the food industry, at a constant weight content of 30 wt.-%. However, due to the lack of miscibility between PLA and ASF, both being raw materials obtained from crops, resultant green composite presented poor ductility and low thermal stability. To overcome this limitation, maleinized linseed oil (MLO), a multi-functionalized plant-derived additive, was originally incorporated as a reactive compatibilizer during the extrusion process. Both chemical and physical characterizations showed that 1¿5 parts per hundred resin (phr) of MLO successfully serve to obtain PLA/ASF composites with improved mechanical, thermal, and thermomechanical properties. The enhancement achieved was particularly related to a dual compatibilizing effect of plasticization in combination with melt grafting. The latter process was specifically ascribed to the formation of new carboxylic ester bonds through the reaction of the multiple maleic anhydride functionalities present in MLO with the hydroxyl groups of both the PLA terminal chains and cellulose on the ASF surface. The fully bio-based and biodegradable composites described herein give an efficient sustainable solution to upgrade agro-food wastes as well as contributing to reducing the cost of PLA-based materials., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) project numbers MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R and Generalitat Valenciana (GV) project number GV/2014/008. L. Quiles-Carrillo wants to thank GV for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Food Biopackaging Films of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Derived From Fruit Pulp Biowaste

  • Meléndez-Rodríguez, Beatriz
  • Castro-Mayorga, Jinneth L.
  • Reis, Maria A. M.
  • Sammon, Chris
  • Cabedo, Luis
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, circular economy based and potentially low-cost poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was produced by mixed microbial cultures derived from fruit pulp, an industrial by-product of the juice industry. Three different chemical routes, namely non-extraction, extraction with sodium hypochlorite (NaClO), and extraction with chloroform, in combination with ¿ltering and centrifugation, were explored to purify the biopolymer and ¿nd the most optimal solution for its processing via electrospinning. The resultant ultrathin ¿ber mats of the different extracted PHBV materials were thermally post-processed at different temperatures in order to obtain continuous ¿lms adequate for food packaging applications. The resultant ¿lms were characterized in terms of morphology, crystallinity as well as thermal, mechanical, and barrier properties. The results showed that extraction with both chloroform and NaClO with a post-treatment of ¿ltering and centrifugation of the PHBV-containing biomass were necessary re¿ning steps to allow its processing by electrospinning. In particular, the PHBV extracted with chloroform presented the highest degree of purity, resulting in more transparent ¿lms with lower wettability and higher ¿exibility. The here-formulated electrospun ¿lms made of biomass derived from biowaste exhibit great potential as interlayers or coatings for food biopackaging applications., The authors would like to thank the Unidad Asociada IATAUJI Plastics Technology and the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R and the H2020 EU projects YPACK (reference number 773872) and RES URBIS (reference number 730349) for funding. BM-R and ST-G would also like to thank the MINECO s FPI (BES2016-077972) and Juan de la Cierva (IJCI-2016-29675) programs, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of the engineering performance of different bio-based aliphatic homopolyamide tubes prepared by profile extrusion

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, three different commercial bio-based polyamides (bio-PAs), namely polyamide 610 (PA610), polyamide 1010 (PA1010), and polyamide 1012 (PA1012), were processed by profile extrusion with an annular die. These aliphatic homopolyamides, also known as "green nylons", are industrially produced by polycondensation reaction of diamines and dicarboxylic acids that are partially or fully obtained from naturally occurring castor oil. The profile-extruded bio-PA tubes were characterized and compared in terms of their thermal, thermomechanical, and mechanical properties and also water uptake. Resultant comparative evaluation indicated that both the methylene-to-amide (CH2/CONH) ratio and the crystallinity degree of the bio-PAs played the main role in determining the performance of the tubes. Due to significant differences in their CH2/CONH ratio, the PA610 tubes showed the highest thermal properties while the tubes made of PA1012 presented the highest flexibility and lowest water uptake. Interestingly, the fully bio-based PA1010 tubes offered the most balanced and enhanced engineering performance, which was ascribed to the high crystallinity achieved during profile extrusion. The here-developed bio-PA tubes can fulfil demanding technical requirements and these also certainly represent a sustainable answer to the rising demand for new high-performance biopolymers for engineering applications. (C) 2017 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Economy and Competitiveness program number MAT2014-59242-C2-1-R and AG12015-63855-C2-1-R and Generalitat Valenciana (GV) program number GV/2014/008. Quiles-Carrillo wants to thank GV for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Oxygen-Scavenging Multilayered Biopapers Containing Palladium Nanoparticles Obtained by the Electrospinning Coating Technique

  • Cherpinski, Adriane
  • Szewczyk, Piotr K.
  • Gruszczynski, Adam
  • Stachewicz, Urszula
  • Lagaron, Jose M.
[EN] The main goal of this study was to obtain, for the first time, highly efficient water barrier and oxygen-scavenging multilayered electrospun biopaper coatings of biodegradable polymers over conventional cellulose paper, using the electrospinning coating technique. In order to do so, poly(3-hydroxybutyrate) (PHB) and polycaprolactone (PCL) polymer-containing palladium nanoparticles (PdNPs) were electrospun over paper, and the morphology, thermal properties, water vapor barrier, and oxygen absorption properties of nanocomposites and multilayers were investigated. In order to reduce the porosity, and to enhance the barrier properties and interlayer adhesion, the biopapers were annealed after electrospinning. A previous study showed that electrospun PHB-containing PdNP did show significant oxygen scavenging capacity, but this was strongly reduced after annealing, a process that is necessary to form a continuous film with the water barrier. The results in the current work indicate that the PdNP were better dispersed and distributed in the PCL matrix, as suggested by focus ion beam-scanning electron microscopy (FIB-SEM) experiments, and that the Pd enhanced, to some extent, the onset of PCL degradation. More importantly, the PCL/PdNP nanobiopaper exhibited much higher oxygen scavenging capacity than the homologous PHB/PdNP, due to most likely, the higher oxygen permeability of the PCL polymer and the somewhat higher dispersion of the Pd. The passive and active multilayered biopapers developed here may be of significant relevance to put forward the next generation of fully biodegradable barrier papers of interest in, for instance, food packaging., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the H2020 EU YPACK (reference number 773872) and ResUrbis (Reference number 730349). A. Cherpinski would like to thank the Brazilian Council for Scientific and Technological Development (CNPq) of the Brazilian Government for her predoctoral grant (205955/2014-2). U. Stachewicz thanks the National Science Centre in Poland for the Sonata Bis 5 project, No 2015/18/E/ST5/00230 allowing this study, and a PhD scholarship for P.K. Szewczyk.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Pectin-Based Films and Their Application in Sustainable Aroma Barrier Multilayer Packaging

  • Balik, Busra Akinalan
  • Argin, Sanem
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Featured Application: The present study aims to develop novel pectin-based films by electrospinning. The here -prepared films were applied as aroma barrier interlayers between two biopolymer films to develop fully bio-based and biodegradable food packaging articles according to the principles of the Circular Economy. Pectin was first dissolved in distilled water and blended with low contents of polyethylene oxide 2000 (PEO2000) as the carrier polymer to produce electrospun fibers. The electrospinning of the water solution of pectin at 9.5 wt% containing 0.5 wt% PEO2000 was selected as it successfully resulted in continuous and non-defected ultrathin fibers with the highest pectin content. However, annealing of the resultant pectin-based fibers, tested at different conditions, developed films with low mechanical integrity, high porosity, and also dark color due to their poor thermal stability. Then, to improve the film-forming process of the electrospun mats, two plasticizers, namely glycerol and polyethylene glycol 900 (PEG(900)), were added to the selected pectin solution in the 2-3 wt% range. The optimal annealing conditions were found at 150 degrees C with a pressure of 12 kN load for 1 min when applied to the electrospun pectin mats containing 5 wt% PEO2000 and 30 wt% glycerol and washed previously with dichloromethane. This process led to completely homogenous films with low porosity and high transparency due to a phenomenon of fibers coalescence. Finally, the selected electrospun pectin-based film was applied as an interlayer between two external layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by the electrospinning coating technology and the whole structure was annealed to produce a fully bio-based and biodegradable multilayer film with enhanced barrier performance to water vapor and limonene., This study was supported by the Turkish Scientific and Technological Research Council (TUBITAK) 2214-A International Research Fellowship Programme for PhD Students and by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers AGL2015-63855-C2-1-R. S.T.-G. is a recipient of a Juan de la Cierva¿Incorporación contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Effect of Halloysite Nanotubes on the Fire Retardancy Properties of Partially Biobased Polyamide 610

  • Marset, David
  • Dolza, Celia
  • Fages, Eduardo
  • Gonga, Eloi
  • Gutiérrez, Óscar
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] The main objective of the work reported here was the analysis and evaluation of halloysite nanotubes (HNTs) as natural flame retardancy filler in partially biobased polyamide 610 (PA610), with 63% of carbon from natural sources. HNTs are naturally occurring clays with a nanotube-like shape. PA610 compounds containing 10%, 20%, and 30% HNT were obtained in a twin-screw co-rotating extruder. The resulting blends were injection molded to create standard samples for fire testing. The incorporation of the HNTs in the PA610 matrix leads to a reduction both in the optical density and a significant reduction in the number of toxic gases emitted during combustion. This improvement in fire properties is relevant in applications where fire safety is required. With regard to calorimetric cone results, the incorporation of 30% HNTs achieved a significant reduction in terms of the peak values obtained of the heat released rate (HRR), changing from 743 kW/m(2) to about 580 kW/m(2) and directly modifying the shape of the characteristic curve. This improvement in the heat released has produced a delay in the mass transfer of the volatile decomposition products, which are entrapped inside the HNTs' lumen, making it difficult for the sample to burn. However, in relation to the ignition time of the samples (TTI), the incorporation of HNTs reduces the ignition start time about 20 s. The results indicate that it is possible to obtain polymer formulations with a high renewable content such as PA610, and a natural occurring inorganic filler in the form of a nanotube, i.e., HNTs, with good flame retardancy properties in terms of toxicity, optical density and UL94 test., This research was funded by the Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanoencapsulation of Aloe vera in Synthetic and Naturally Occurring Polymers by Electrohydrodynamic Processing of Interest in Food Technology and Bioactive Packaging

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Wilkanowicz, Sabina
  • Meléndez-Rodríguez, Beatriz
  • Lagaron, Jose M.
[EN] This work originally reports on the use of electrohydrodynamic processing (EHDP) to encapsulate Aloe vera (AV, Aloe barbadensis Miller) using both synthetic polymers, i.e., polyvinylpyrrolidone (PVP) and poly(vinyl alcohol) (PVOH), and naturally occurring polymers, i.e., barley starch (BS), whey protein concentrate (WPC), and maltodextrin. The AV leaf juice was used as the water-based solvent for EHDP, and the resultant biopolymer solution properties were evaluated to determine their effect on the process. Morphological analysis revealed that, at the optimal processing conditions, synthetic polymers mainly produced fiber-like structures, while naturally occurring polymers generated capsules. Average sizes ranged from 100 nm to above 3 ¿m. As a result of their different and optimal morphology and, hence, higher AV content, PVP, in the form of nanofibers, and WPC, of nanocapsules, were further selected to study the AV stability against ultraviolet (UV) light exposure. Fourier transform infrared (FTIR) spectroscopy confirmed the successful encapsulation of AV in the biopolymer matrices, presenting both encapsulants a high chemical interaction with the bioactive components. Ultraviolet-visible (UV-vis) spectroscopy showed that, while PVP nanofibers offered a poor effect on the AV degradation during UV light exposure (~10% of stability after 5 h), WPC nanobeads delivered excellent protection (stability of >95% after 6 h). This was ascribed to positive interactions between WPC and the hydrophilic components of AV and the inherent UV-blocking and oxygen barrier properties provided by the protein. Therefore, electrospraying of food hydrocolloids interestingly appears as a novel potential nanotechnology tool toward the formulation of more stable functional foods and nutraceuticals., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO, Project AGL2015-63855-C2-1-R) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reactive Melt Mixing of Poly(3-Hydroxybutyrate)/Rice Husk Flour Composites with Purified Biosustainably Produced Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)

  • Meléndez-Rodríguez, Beatriz
  • Aldureid, Abdulaziz
  • Cabedo, Luis
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Novel green composites based on commercial poly(3-hydroxybutyrate) (PHB) filled with 10 wt % rice husk flour (RHF) were melt-compounded in a mini-mixer unit using triglycidyl isocyanurate (TGIC) as compatibilizer and dicumyl peroxide (DCP) as initiator. Purified poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed bacterial cultures derived from fruit pulp waste was then incorporated into the green composite in contents in the 5-50 wt % range. Films for testing were obtained thereafter by thermo-compression and characterized. Results showed that the incorporation of up to 20 wt % of biowaste derived PHBV yielded green composite films with a high contact transparency, relatively low crystallinity, high thermal stability, improved mechanical ductility, and medium barrier performance to water vapor and aroma. This study puts forth the potential use of purified biosustainably produced PHBV as a cost-effective additive to develop more affordable and waste valorized food packaging articles., This research was supported by the Spanish Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva-Incorporación contract (IJCI-2016-29675), respectively. The authors also thank the Joint Unit in Polymers Technology between IATA¿CSIC and PIMA-Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antimicrobial and Antioxidant Performance of Various Essential Oils and Natural Extracts and Their Incorporation into Biowaste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Layers Made from Electrospun Ultrathin Fibers

  • Figueroa-López, Kelly Johana
  • Vicente, António A.
  • Reis, Maria A.M.
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, the antibacterial and antioxidant properties of oregano essential oil (OEO), rosemary extract (RE), and green tea extract (GTE) were evaluated. These active substances were encapsulated into ultrathin fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from fruit waste using solution electrospinning, and the resultant electrospun mats were annealed to produce continuous films. The incorporation of the active substances resulted in PHBV films with a relatively high contact transparency, but it also induced a slightly yellow appearance and increased the films opacity. Whereas OEO significantly reduced the onset of thermal degradation of PHBV, both the RE and GTE-containing PHBV films showed a thermal stability profile that was similar to the neat PHBV film. In any case, all the active PHBV films were stable up to approximately 200 degrees C. The incorporation of the active substances also resulted in a significant decrease in hydrophobicity. The antimicrobial and antioxidant activity of the films were finally evaluated in both open and closed systems for up to 15 days in order to anticipate the real packaging conditions. The results showed that the electrospun OEO-containing PHBV films presented the highest antimicrobial activity against two strains of food-borne bacteria, as well as the most significant antioxidant performance, ascribed to the films high content in carvacrol and thymol. Therefore, the PHBV films developed in this study presented high antimicrobial and antioxidant properties, and they can be applied as active layers to prolong the shelf life of the foods in biopackaging applications., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 project YPACK (reference number 773872). K.J.F.-L. is a recipient of a Santiago Grisolía (GRISOLIAP/2017/101) grant of the Generalitat Valenciana (GVA) and S.T.-G. is on a Juan de la Cierva - Incorporación contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Melt processability, characterization, and antibacterial activity of compression-molded green composite sheets made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced with coconut fibers impregnated with oregano essential oil

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Hilliou, Loic
  • Meléndez-Rodríguez, Beatriz
  • Figueroa-López, Kelly Johana
  • Madalena, Daniel
  • Cabedo, Luis
  • Covas, Jose A.
  • Vicente, Antonio
  • Lagaron, Jose M.
[EN] New packaging materials based on green composite sheets consisting of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and coconut fibers (CFs) were obtained by twin-screw extrusion (TSE) followed by compression molding. The effect of varying the CF weight content, i.e. 1, 3, 5, and 10¿wt.-%, and the screw speed during melt processing, i.e. 75, 150, and 225¿rpm, on both the aspect ratio and dispersion of the fibers was analyzed and related to the properties of the compression-molded sheets. Finally, the CFs were impregnated with oregano essential oil (OEO) by an innovative spray coating methodology and then incorporated into PHBV at the optimal processing conditions. The functionalized green composite sheets presented bacteriostatic effect against Staphylococcus aureus from fiber contents as low as 3¿wt.-%. Therefore, the here-prepared CFs can be successfully applied as natural vehicles to entrap extracts and develop green composites of high interest in active food packaging to provide protection and shelf life extension., This research was funded by the EU H2020 project YPACK (reference number 773872), the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684), and the BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund (ERDF) under the scope of Norte2020 - Programa Operacional Regional do Norte. Prof. Sergio Torres-Giner wants to thank the European Cooperation in Science and Technology (COST) Action FP1405, ActInPak, for financial support during his Short Term Scientific Mission (STSM) at the University of Minho.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrospun Antimicrobial Films of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Containing Eugenol Essential Oil Encapsulated in Mesoporous Silica Nanoparticles

  • Meléndez-Rodríguez, Beatriz
  • Figueroa-López, Kelly Johana
  • CABEDO MAS, LUIS
  • LAGARON CABELLO, JOSE MARIA
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The main goal of this study was to develop poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films with long-term antimicrobial capacity of interest in food packaging applications. To this end, eugenol was first highly efficiently encapsulated at 50 wt.-% in the pores of mesoporous silica nanoparticles by vapor adsorption. The eugenol-containing nanoparticles were then loaded in the 2.5-20 wt.-% range into PHBV by electrospinning and the resultant electrospun composite fibers were annealed at 155 degrees C to produce continuous films. The characterization showed that the PHBV films filled with mesoporous silica nanoparticles containing eugenol present sufficient thermal resistance and enhanced mechanical strength and barrier performance to water vapor and limonene. The antimicrobial activity of the films was also evaluated against foodborne bacteria for 15 days in open vs. closed conditions in order to simulate real packaging conditions. The electrospun PHBV films with loadings above 10 wt.-% of mesoporous silica nanoparticles containing eugenol successfully inhibited the bacterial growth, whereas the active films stored in hermetically closed systems increased their antimicrobial activity after 15 days due to the volatile portion accumulated in the system's headspace and the sustained release capacity of the films. The resultant biopolymer films are, therefore, potential candidates to be applied in active food packaging applications to provide shelf life extension and food safety., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers AGL2015-63855-C2-1-R and MAT2015-64139-C4-1-R, by the Generalitat Valenciana (GVA) PROMETEO/2018/024 program, and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva - Incorporación contract (IJCI-2016-29675), respectively. K.J.F-L. also acknowledges GVA for her Santiago Grisolia grant (GRISOLIAP/2017/101). A.B. would also like to thank GVA (POSTD/2014/016) and MICIU for her Juan de la Cierva - Incorporación contract (IJCI-2014-21534). The authors also thank the Joint Unit in Polymers Technology between IATA¿CSIC and PIMA-Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ductility and Toughness Improvement of Injection-Molded Compostable Pieces of Polylactide by Melt Blending with Poly(e-caprolactone) and Thermoplastic Starch

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Jorda-Vilaplana, Amparo
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Pineiro, Federico
[EN] The present study describes the preparation and characterization of binary and ternary blends based on polylactide (PLA) with poly("-caprolactone) (PCL) and thermoplastic starch (TPS) to develop fully compostable plastics with improved ductility and toughness. To this end, PLA was first melt-mixed in a co rotating twin-screw extruder with up to 40 wt % of different PCL and TPS combinations and then shaped into pieces by injection molding. The mechanical, thermal, and thermomechanical properties of the resultant binary and ternary blend pieces were analyzed and related to their composition. Although the biopolymer blends were immiscible, the addition of both PCL and TPS remarkably increased the flexibility and impact strength of PLA while it slightly reduced its mechanical strength. The most balanced mechanical performance was achieved for the ternary blend pieces that combined high PCL contents with low amounts of TPS, suggesting a main phase change from PLA/TPS (comparatively rigid) to PLA/PCL (comparatively flexible). The PLA-based blends presented an ¿island-and-sea¿ morphology in which the TPS phase contributed to the fine dispersion of PCL as micro-sized spherical domains that acted as a rubber-like phase with the capacity to improve toughness. In addition, the here-prepared ternary blend pieces presented slightly higher thermal stability and lower thermomechanical stiffness than the neat PLA pieces. Finally, all biopolymer pieces fully disintegrated in a controlled compost soil after 28 days. Therefore, the inherently low ductility and toughness of PLA can be successfully improved by melt blending with PCL and TPS, resulting in compostable plastic materials with a great potential in, for instance, rigid packaging applications., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R, and by the EU H2020 project YPACK (reference number 773872).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The impact of electrospun films of poly(epsilon-caprolactone) filled with nanostructured zeolite and silica microparticles on in vitro histamine formation by Staphylococcus aureus and Salmonella Paratyphi A

  • Alp-Erbay, Esen
  • Figueroa-López, Kelly Johana
  • Lagaron, Jose M.
  • Çaglak, Emre
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This research study originally reports the preparation and characterization of electrospun films based on poly(epsilon-caprolactone) (PCL) with high histamine-binding capacity. To this end, submicron PCL fibers filled with nanostructured zeolite or silica (SiO2) microparticles in the 5-20 wt% range were first prepared by solution electrospinning. The resultant electrospun composite fiber mats were thereafter thermally post-treated at 55 degrees C to successfully develop contact-transparent films with reduced porosity and improved mechanical strength. The capacity of the developed composite films to entrap histamine was evaluated in vitro by the culture media method using Staphylococcus aureus (S. aureus) and Salmonella Paratyphi A (S. Paratyphi A) foodborne bacteria. Both electrospun zeolite- and SiO2-containing PCL films exhibited high histamine-binding capacity, being more effective for S. aureus. The histamine entrapment performance was significantly higher for the PCL films filled with zeolite due to the enhanced porous structure and more optimal adsorption selectivity of this inorganic filler. The here-developed electrospun composite films can be applied as novel active-scavenging packaging materials to entrap heat-stable histamine and other biogenic amines released from fish and fishery products., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 YPACK project (reference number 773872). The authors also thank the Republic of Turkey Ministry of Agriculture and Forestry General Directorate of Agricultural Research and Policies (TAGEM) and Central Fisheries Research Institute SUMAE) for funding support through the projects TAGEM/HSGYAD/14/A05/P05/70 and TAGEM/HSGYAD/17/A03/P05/133. Figueroa Lopez is a recipient of a Santiago Grisolia (GRISOLIAP/2017/101) grant of the Generalitat Valenciana (GVA) and Torres-Giner is on a Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced Interfacial Adhesion of Polylactide/Poly(e-caprolactone)/Walnut Shell Flour Composites by Reactive Extrusion with Maleinized Linseed Oil

  • Montava-Jorda, Sergi|||0000-0002-5378-0333
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Montanes, Nestor|||0000-0001-6070-127X
  • Richart, Nuria
[EN] Novel green composites were prepared by melt compounding a binary blend of polylactide (PLA) and poly("-caprolactone) (PCL) at 4/1 (wt/wt) with particles of walnut shell flour (WSF) in the 10¿40 wt % range, which were obtained as a waste from the agro-food industry. Maleinized linseed oil (MLO) was added at 5 parts per hundred resin (phr) of composite to counteract the intrinsically low compatibility between the biopolymer blend matrix and the lignocellulosic fillers. Although the incorporation of WSF tended to reduce the mechanical strength and thermal stability of PLA/PCL, the MLO-containing composites filled with up to 20 wt % WSF showed superior ductility and a more balanced thermomechanical response. The morphological analysis revealed that the performance improvement attained was related to a plasticization phenomenon of the biopolymer blend and, more interestingly, to an enhancement of the interfacial adhesion of the green composites achieved by extrusion with the multi-functionalized vegetable oil., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers AGL2015-63855-C2-1-R and MAT2017-84909-C2-2-R. L.Q.-C. holds a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) whereas S.T.-G. is a recipient of a Juan de la Cierva Incorporación contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Post-processing optimization of electrospun submicron poly(3-hydroxybutyrate) fibers to obtain continuous films of interest in food packaging applications

  • Cherpinski, Adriane
  • Cabedo, Luis
  • Lagaron. Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Polyhydroxyalkanoates (PHAs) are one of the most researched family of biodegradable polymers based on renewable materials due to their thermoplastic nature and moisture resistance. The present study was targeted to investigate the preparation and characterization of poly(3-hydroxybutyrate) (PHB) films obtained through the electrospinning technique. To convert them into continuous films and then to increase their application interest in packaging, the electrospun fiber mats were subsequently post-processed by different physical treatments. Thus, the effect of annealing time and cooling method on morphology, molecular order, thermal, optical, mechanical, and barrier properties of the electrospun submicron PHB fibers was studied. Annealing at 160°C, well below the homopolyester melting point, was found to be the minimum temperature at which homogeneous transparent films were produced. The film samples that were cooled slowly after annealing showed the lowest permeability to oxygen, water vapor, and limonene. The optimally post-processed electrospun PHB fibers exhibited similar rigidity to conventional compression-molded PHA films, but with enhanced elongation at break and toughness. Films made by this electrospinning technique have many potential applications, such as in the design of barrier layers, adhesive interlayers, and coatings for fiber- and plastic-based food packaging materials., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [Project AGL2015-63855-C2-1-R] and by the Brazilian Council for Scientific and Technological Development (CNPq) [Grant 205955/2014-2].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In Situ Compatibilization of Biopolymer Ternary Blends by Reactive Extrusion with Low-Functionality Epoxy-Based Styrene Acrylic Oligomer

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Lagaron, J.M.
[EN] The present study reports on the use of low-functionality epoxy-based styrene¿acrylic oligomer (ESAO) to compatibilize immiscible ternary blends made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), polylactide (PLA), and poly(butylene adipate-co-terephthalate) (PBAT). The addition during melt processing of low-functionality ESAO at two parts per hundred resin (phr) of biopolymer successfully changed the soften inclusion phase in the blend system to a thinner morphology, yielding biopolymer ternary blends with higher mechanical ductility and also improved oxygen barrier performance. The compatibilization achieved was ascribed to the in situ formation of a newly block terpolymer, i.e. PHBVb- PLA-b-PBAT, which was produced at the blend interface by the reaction of the multiple epoxy groups present in ESAO with the functional terminal groups of the biopolymers. This chemical reaction was mainly linear due to the inherently low functionality of ESAO and the more favorable reactivity of the epoxy groups with the carboxyl groups of the biopolymers, which avoided the formation of highly branched and/or cross-linked structures and thus facilitated the films processability. Therefore, the reactive blending of biopolymers at different mixing ratios with low-functionality ESAO represents a straightforward methodology to prepare sustainable plastics at industrial scale with different physical properties that can be of interest in, for instance, food packaging applications., This research was funded by the EU H2020 project YPACK (Reference number 773872) and by the Spanish Ministry of Science, Innovation, and Universities (MICIU) with project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. L. Quiles-Carrillo wants to thank the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through his FPU Grant Number FPU15/03812. Torres-Giner also acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A comparative study on the effect of different reactive compatibilizers on injection-molded pieces of bio-based high-density polyethylene/polylactide blends

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Jorda-Vilaplana, Amparo
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present study reports on the development of binary blends consisting of bio-based high-density polyethylene (bio-HDPE) with polylactide (PLA), in the 5¿20 wt % range, prepared by melt compounding and then shaped into pieces by injection molding. In order to enhance the miscibility between the green polyolefin and the biopolyester, different reactive compatibilizers were added during the melt-blending process, namely polyethylene grafted maleic anhydride (PE-g-MA), poly(ethylene-co-glycidyl methacrylate) (PE-co-GMA), maleinized linseed oil (MLO), and a combination of MLO with dicumyl peroxide (DCP). Among the tested compatibilizers, the dual addition of MLO and DCP provided the binary blend pieces with the most balanced mechanical performance in terms of rigidity and impact strength as well as the highest thermal stability. The fracture surface of the binary blend piece processed with MLO and DCP revealed the formation of a continuous structure in which the dispersed PLA phase was nearly no discerned in the bio-HDPE matrix. The resultant miscibility improvement was ascribed to both the high solubility and plasticizing effect of MLO on the PLA phase as well as the crosslinking effect of DCP on both biopolymers. The latter effect was particularly related to the formation of macroradicals of each biopolymer that, thereafter, led to the in situ formation of bio HDPE-co-PLA copolymers and also to the development of a partially crosslinked network in the binary blend. As a result, cost-effective and fully bio-based polymer pieces with improved mechanical strength, high toughness, and enhanced thermal resistance were obtained., This research was funded by the EU H2020 project YPACK (reference number 773872) and by the Ministry of Science, Innovation, and Universities (MICIU, project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R). Quiles-Carrillo and Torres-Giner are recipients of a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) and a Juan de la Cierva contract (IJCI-2016-29675) from the MICIU, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reactive toughening of injection-molded polylactide pieces using maleinized hemp seed oil

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Balart, Rafael|||0000-0001-5670-7126
  • Blanes-Martínez, M.M.
[EN] The present study describes the effect of maleinized hemp seed oil (MHO) on the physical performance of polylactide (PLA) pieces. To this end, PLA pieces with varying MHO contents in the 0¿10 wt% range were manufactured by twin-screw extrusion (TSE) followed by injection molding. The resultant pieces were characterized in terms of their mechanical, thermal, and thermomechanical properties. The obtained properties suggested that, unlike typical plasticizers, MHO does not only induce an increment in elongation at break and impact resistance but it also enhances both elastic modulus and tensile strength. In addition, a moderate decrease in the glass transition temperature (Tg) was observed. This was ascribed to simultaneous linear chain-extension, branching, and/or cross-linking phenomena due to the reaction of the multiple maleic anhydride (MAH) groups present in MHO with the terminal hydroxyl groups of the PLA chains. Furthermore, morphology characterization revealed that, though certain phase separation occurred at its highest content, MHO was finely dispersed as submicron droplets within the PLA matrix contributing to improving toughness. The use of multi-functionalized reactive vegetable oils thus represents a highly sustainable solution to reduce the intrinsic brittleness of PLA materials without compromising their mechanical resistance and the toughened biopolymer pieces described herein can find interesting applications in, for instance, rigid packaging., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) (projects MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R.). L. Quiles-Carrillo acknowledges Generalitat Valenciana (GV) for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of microwave-assisted extraction of phenolic compounds with antioxidant activity from carob pods

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Mellinas, Cristina
  • Garrigos, M.C.
[EN] A microwave-assisted extraction (MAE) procedure to obtain phenolic compounds from carob bark was optimized by using response surface methodology. A four-factor, three-level Box-Behnken design with five central points was used to evaluate the influence of temperature, solid-liquid ratio, ethanol concentration and time in carob bark extraction in terms of antioxidant activity (DPPH) and total extraction yield. Optimal extraction conditions were found using 80 ºC, 35% (v/v) ethanol, a ratio of 35 mL/g and 29.5 min. Total phenolics content (TPC), antioxidant activity (DPPH, FRAP, ABTS), carbohydrates content and main polyphenols composition (HPLC) were determined at optimal conditions. An experimental total yield of 66.5% was obtained with a TPC value of 33.6 mg GAE/g DW and polysaccharides content of 345.4 mg glucose/g DW. A high antioxidant activity was also shown by the three methods tested. The results showed the potential of carob pods skin as a natural source of phenolic compounds, in particular gallic acid, and the effectiveness of MAE as extraction technique for the revalorization of this agro-food waste., This research was supported by the Spanish Ministry of Science, Innovation and Universities (MICIU) programs MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R and by the EU H2020 project YPACK (reference number 773872). Quiles-Carrillo wants to thank GV for his FPI grant (ACIF/2016/182) and MECD for his FPU grant (FPU15/03812). Torres-Giner also thank MINECO for his Juan de la Cierva contract (IJCI-2016-29675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Balart, Rafael|||0000-0001-5670-7126
  • Duart, S.
[EN] Thiswork reports the effect of acrylated epoxidized soybean oil (AESO) addition on the mechanical, thermal, and thermomechanical properties of polylactide (PLA) parts obtained by injection molding. To this end, AESO, a chemically multi-functionalized vegetable oil, was incorporated into PLA during melt processing. The PLA parts with AESO contents in the 2.5¿7.5 wt% range showed a remarkable enhancement in both elongation at break and impact-absorbed energy while their tensile and flexural strength as well as thermomechanical properties were maintained or slightly improved. Additionally, the AESO-containing PLA parts presented higher thermal stability and lower crystallinity. The improvement achievedwas ascribed to a dual effect of plasticization in combination with a chain-extension and/or cross-linking process of the PLA chains by the highly reactive acrylate and epoxy groups present in AESO. The use of AESO thus represents an environmentally friendly solution to obtain toughened PLA materials of high interest in, for instance, rigid packaging, automotive or building and construction applications., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [grant numbers MAT2014-59242-C2-1-R & AGL2015-63855-C2-1-R]. L. Quiles-Carrillo thanks the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through the FPU program [grant number FPU15/03812].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel poly(e-caprolactone)/gelatin wound dressings prepared by emulsion electrospinning with controlled release capacity of Ketoprofen anti-inflammatory drug

  • Basar, A. O.
  • Castro, S.
  • Lagaron, J. M.
  • Turkoglu Sasmazel, H.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, a single and binary Ketoprofen-loaded mats of ultrathin fibers were developed by electrospinning and their physical properties and drug release capacity was analyzed. The single mat was prepared by solution electrospinning of poly(¿-caprolactone) (PCL) with Ketoprofen at a weight ratio of 5wt%. This Ketoprofen-containing PCL solution was also used as the oil phase in a 7:3 (wt/wt) emulsion with gelatin dissolved in acidified water. The resultant stable oil-in-water (O/W) emulsion of PCL-in-gelatin, also containing Ketoprofen at 5wt%, was electrospun to produce the binary mat. Cross-linking process was performed by means of glutaraldehyde vapor on the electrospun binary mat to prevent dissolution of the hydrophilic gelatin phase. The performed characterization indicated that Ketoprofen was successfully embedded in the single and binary electrospun mats, i.e. PCL and PCL/gelatin, and both mats showed high hydrophobicity but poor thermal resistance. In vitro release studies interestingly revealed that, in comparison to the single PCL electrospun mat, the binary PCL/gelatin mat significantly hindered Ketoprofen burst release and exhibited a sustained release capacity of the drug for up to 4days. In addition, the electrospun Ketoprofen-loaded mats showed enhanced attachment and proliferation of L929 mouse fibroblast cells, presenting the binary mat the highest cell growth yield due to its improved porosity. The here-developed electrospun materials clearly show a great deal of potential as novel wound dressings with an outstanding controlled capacity to release drugs., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R for financial support. The authors would also like to thank the European Cooperation Science & Technology (COST) Action MP1206 for their Short Term Scientific Mission (STSM) at IATA-CSIC, Valencia, and the Academic Writing Advisory Center (AWAC) of Atilim University for English language revision.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrospraying assisted by pressurized gas as an innovative high-throughput process for the microencapsulation and stabilization of docosahexaenoic acid-enriched fish oil in zein prolamine

  • Busolo, M.A.
  • Prieto, C.
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Zein, a prolamine obtained from maize, was employed to encapsulate a fish oil highly enriched with docosahexaenoic acid (DHA) by an innovative process termed electrospraying assisted by pressurized gas (EAPG). This technology combines high electric voltage with pneumatic spray to yield a high-throughput encapsulation process. Semi-spherical zein flowable capsules with mean sizes of 1.4 mu m containing the DHA-enriched fish oil were produced by EAPG from inert ethanol solutions at room conditions, presenting a high encapsulation efficiency. The oxidative stability tests carried out in the zein microcapsules obtained by EAPG showed that the DHA-enriched fish oil was efficiently protected over storage time. Sensory tests were also performed on fortified reconstituted milk with the freshly prepared zein/DHA-enriched fish oil microcapsules, suggesting negligible oxidation effects after 45 days. The results described herein indicate that EAPG is a promising innovative high-throughput electrospraying-based methodology for the encapsulation of bioactives and, therefore, the resultant DHA-enriched fish oil containing microcapsules can be industrially applied for the formulation of fortified foods. Industrial relevance: An innovative process, termed electrospraying assisted by pressurized gas (EAPG), is herein originally presented as a novel encapsulation methodology. This technology is based on the combination of high voltage and pneumatic spray, allowing the formation of microcapsules at room temperature conditions. Thus, EAPG shows a great deal of potential to encapsulate nutraceuticals and other bioactives that are sensitive to thermal degradation and/or oxidation. The resultant bioactive-containing capsules can be, thereafter, applied to develop novel fortified food products., The authors would like to thank the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R and to the H2020 EU project YPACK (reference number 773872) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A comparative study on the reactive compatibilization of melt-processed polyamide 1010/polylactide blends by multi-functionalized additives derived from linseed oil and petroleum

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Rallini, M.
  • Dominici, F.
  • Torre, L.
[EN] This research work describes the manufacturing and characterization of novel engineering materials consisted of fully bio-based blends of polyamide 1010 (PA1010) with 20 wt% of polylactide (PLA). Four different compatibilizers were used to enhance the miscibility and the performance of the biopolymer blends. Two multi-functionalized vegetable oils (maleinized linseed oil (MLO) and epoxidized linseed oil (ELO)) and two petroleum-derived glycidyl-based additives (epoxy styrene-acrylic oligomer (ESAO) and styrene-glycidyl methacrylate copolymer (PS-GMA)) were tested during melt compounding. The resultant biopolymer blends were processed by either cast film extrusion or injection molding to obtain films and pieces, respectively. Thin films with an average thickness of 50¿60 µm and thick pieces of 4 mm were obtained, and their mechanical, morphological, thermal, thermomechanical, barrier and, optical properties were characterized. Although all four compatibilizers successfully provided compatibilization to the blends, the chemically modified vegetable oils, that is, MLO and ELO yielded the injection-molded pieces with the most balanced mechanical properties in terms of strength and toughness. Besides, the resultant films showed very low oxygen transmission rate values, thus broadening the potential of these biopolymer blends for the food packaging industry, This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. Quiles-Carrillo and Torres-Giner are recipients of a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) and a Juan de la Cierva contract (IJCI-2016-29675) from MICIU, respectively. Microscopy services at UPV are acknowledged for their help in collecting and analyzing FESEM images. Authors thank Polyscope for kindly supplying XibondTM 920 for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation, characterization and antimicrobial properties of electrospun polylactide films containing Allium ursinum L. extract

  • Radusin, Tanja
  • Stupar, Alena
  • Ristic, Ivan
  • Miletic, Aleksandra
  • Novakovic, Aleksandra
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Novel active films of polylactide (PLA) containing extract of Allium ursinum L. (AU), also called wild garlic, at 10 wt% were succesfully prepared by the electrospinning technology. Electrospinning of the AU-containing PLA solutions yielded fibers in the 1-2 mu m range with a beaded-like morphology, suggesting that the AU extract was mainly encapsulated in certain fiber regions. The resultant electrospun mats were then subjected to annealing at 135 degrees C to obtain continuous films of application interest in active packaging. The film cross-sections revealed that the AU extract was incorporated into the PLA matrix in the form of micro-sized droplets. The thermal properties showed that the AU extract addition plasticized the PLA matrix and also lowered its crystallinity degree as it disrupted the ordering of the PLA chains by hindering their folding into the crystalline lattice. Thermal stability analysis indicated that the natural extract positively contributed to a delay in thermal degradation of the biopolymer and it was thermally stable when encapsulated in the PLA film. The AU extract incorporation also produced a mechanical reinforcement on the electrospun PLA films and improved slightly the water barrier performance. Finally, a significant antimicrobial activity of the electrospun PLA films containing the natural extract was achieved against foodborne bacteria., This paper has been supported by the COST Action FP1405 Active and intelligent fiber-based packaging - innovation and market introduction (ActInPak), FOODStars project Food Product Development Cycle: Frame for stepping Up Research Excellence of FINS (Grant Agreement 692276), the Spanish Ministry of Science, Innovation, and Universities (MICIU, project AGL2015-63855-C2-1-R) and the EU H2020 project YPACK (reference number 773872). Torres-Giner also acknowledges MICIU for his Juan de la Cierva-Incorporacion contract (IJCI-2016-29675).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bioactive Multilayer Polylactide Films with Controlled Release Capacity of Gallic Acid Accomplished by Incorporating Electrospun Nanostructured Coatings and Interlayers

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Lagaron, Jose M.
[EN] The present research reports on the development of bi- and multilayer polylactide (PLA) films by the incorporation of electrospun nanostructured PLA coatings and interlayers containing the antioxidant gallic acid (GA) at 40 wt% onto cast-extruded PLA films. To achieve the bilayer structures, submicron GA-loaded PLA fibers were applied on 200-µm cast PLA films in the form of coatings by electrospinning for 1, 2, and 3 h. For the multilayers, the cast PLA films were first coated on one side by electrospinning, then sandwiched with 10-µm PLA film on the other side, and the resultant whole structure was finally thermally post-treated at 150 ºC without pressure. Whereas the bilayer PLA films easily delaminated and lacked transparency, the multilayers showed sufficient adhesion between layers and high transparency for deposition times during electrospinning of up to 2 h. The incorporation of GA positively contributed to delaying the thermal degradation of PLA for approximately 10 ºC, as all films were thermally stable up to 345 ºC. The in vitro release studies performed in saline medium indicated that the GA released from the bilayer PLA films rapidly increased during the first 5 h of immersion while it stabilized after 45¿250 h. Interestingly, the PLA multilayers offered a high sustained release of GA, having the capacity to deliver the bioactive for over 1000 h. In addition, in the whole tested period, the GA released from the PLA films retained most of its antioxidant functionality. Thus, during the first days, the bilayer PLA films can perform as potent vehicles to deliver GA while the multilayer PLA films are able to show a sustained release of the natural antioxidant for extended periods, This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R and by the EU H2020 project YPACK (reference number 773872).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Injection-Molded Parts of Partially Biobased Polyamide 610 and Biobased Halloysite Nanotubes

  • Marset, David
  • Dolza, Celia
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] This works focuses on the development of environmentally friendly composites with a partially biobased polyamide 610 (PA610), containing 63% biobased content, and a natural inorganic filler at the nanoscale, namely, halloysite nanotubes (HNTs). PA610 composites containing 10, 20, and 30 wt% HNTs were obtained by melt extrusion in a twin screw co-rotating extruder. The resulting composites were injection-molded for further characterization. The obtained materials were characterized to obtain reliable data about their mechanical, thermal, and morphological properties. The effect of the HNTs wt% on these properties was evaluated. From a mechanical standpoint, the addition of 30 wt% HNTs gave an increase in tensile modulus of twice the initial value, thus verifying how this type of natural load provides increased stiffness on injection molded parts. The materials prepared with HNTs slightly improved the thermal stability, while a noticeable improvement on thermomechanical resistance over a wide temperature range was observed with increasing HNTs content. The obtained results indicate that high biobased content composites can be obtained with an engineering thermoplastic, i.e., PA610, and a natural inorganic nanotubeshaped filler, i.e., HNTs, with balanced mechanical properties and attractive behavior against high temperature., This research was funded by the Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the use of acrylated epoxidized soybean oil as a reactive compatibilizer in injection-molded compostable pieces consisting of polylactide filled with orange peel flour

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Lagaron, Jose Maria
[EN] In the present study, novel green composites made of polylactide (PLA) and orange peel flour (OPF) were melt compounded by twin¿screw extrusion (TSE) and shaped into pieces by injection molding. Orange peel, a large by¿product of the juice industry, was first grounded to flour and then incorporated as a lignocellulosic filler into the biopolymer at 10, 20, and 30 wt.¿%. Since both components of the green composite presented low compatibility, the resultant injection¿molded pieces showed poor ductility and impaired thermomechanical performance. As a new bio¿based reactive compatibilizer, acrylated epoxidized soybean oil (AESO) was added at 5 parts per hundred resin (phr) to the PLA/OPF formulations during the extrusion process. The addition of AESO increased the filler¿biopolymer adhesion and led to compostable green composite pieces with improved physical properties. The enhancement achieved was related to a dual effect of plasticization and melt grafting of the OPF particles onto the PLA chains provided by the multiple acrylate and epoxy groups present in AESO. The use of multi¿functionalized vegetable oils to improve the performance of green composites certainly opens up new opportunities for the expansion of fully bio¿based and biodegradable materials that are partially obtained from agro¿food waste., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) program numbers MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R. LQ-C also thanks the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through FPU grant number FPU15/03812.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrospun Poly(ethylene-co-vinyl alcohol)/Graphene Nanoplatelets Composites of Interest in Intelligent Food Packaging Applications

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Echegoyen, Y.
  • Badia, Jose D.
  • Lagaron Cabello, José María
[EN] Graphene nanoplatelets (GNPs) were synthetized from graphite powder and, thereafter, embedded in poly(ethylene-co-vinyl alcohol) (EVOH) fibers by electrospinning in the 0.1-2 wt.-% range. The morphological, chemical, and thermal characterization performed on the electrospun nanocomposite fibers mats revealed that the GNPs were efficiently dispersed and rolled along the EVOH fibrilar matrix up to contents of 0.5 wt.-%. Additionally, the dielectric behavior of the nanocomposite fibers was evaluated as a function of the frequency range and GNPs content. The obtained results indicated that their dielectric constant rapidly decreased with the frequency increase and only increased at low GNPs loadings while the nanocomposite fiber mats became electrically conductive, with the maximum at 0.5 wt.-% GNPs content. Finally, the electrospun mats were subjected to a thermal post-treatment and dark films with a high contact transparency were obtained, suggesting that the nanocomposites can be used either in a nonwoven fibers form or in a continuous film form. This study demonstrates the potential of electrospinning as a promising technology to produce GNPs-containing materials with high electrical conductivity that can be of potential interest in intelligent packaging applications as "smart" labels or tags., This research was funded by the European Regional Development Funds (ERDF) and Ministry of Science, Innovation, and Universities (MICIU) project numbers ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R, UPOV13-3E-1947, and AGL2015-63855-C2-1-R. S.T.-G. acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675). J.D.B. and R.T.-J. also thank Generalitat Valenciana (GV) for their projects APOSTD14/041 and GRISOLIA/2012/003, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Injection-molded parts of fully bio-based polyamide 1010 strengthened with waste derived slate fibers pretreated with glycidyl- and amino-silane coupling agents

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Fully bio-based polyamide 1010 (PA1010) was melt-compounded with 15 wt% of slate fibers (SFs), which were obtained from wastes of the tile industry, and the resultant composites were shaped into parts by injection molding. The as-received fibers were first thermally treated and afterwards subjected to surface modification with glycidyl- and amino-silane coupling agents to improve the interfacial adhesion of the composites. The incorporation of both the glycidyl-silane slate fiber (G-SF) and amino-silane slate fiber (A-SF) remarkably improved the mechanical strength of PA1010, inducing a 3-fold increase in tensile modulus. The composite parts prepared with the silanized SFs also presented higher thermal stability and improved thermomechanical resistance. Water uptake was reduced below 1%, encouragingly suggesting that the mechanical performance of the PA1010/SF composites would be scarcely affected by atmospheric humidity. G-SF was the most effective in strengthening PA1010. This improvement was ascribed to the higher reactivity of the cyclic anhydride in the coupled silane with the terminal hydroxyl groups of the biopolymer., The Spanish Ministry of Science, Innovation and Universities MICIU) is acknowledged for funding through the MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R projects. Quiles-Carrillo holds a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) whereas Torres-Giner is a recipient of a Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) from MICIU.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Optimization of Microwave-Assisted Extraction of Phenolic Compounds with Antioxidant Activity from Carob Pods

  • Quiles-Carrillo, Luis
  • Mellinas-Ciller, Ana-Cristina
  • Garrigós, María del Carmen
  • Balart, Rafael
  • Torres-Giner, Sergio
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Mellinas-Ciller, Ana-Cristina|||/items/8f6577ab-b8f1-410d-9d1e-fa3fbf1b7f01
A microwave-assisted extraction (MAE) procedure to obtain phenolic compounds from carob bark was optimized by using response surface methodology. A four-factor, three-level Box–Behnken design with five central points was used to evaluate the influence of temperature, solid-liquid ratio, ethanol concentration, and time in carob bark extraction in terms of antioxidant activity (DPPH) and total extraction yield. Optimal extraction conditions were found using 80 °C, 35% (v/v) ethanol, a ratio of 35 mL/g, and 29.5 min. Total phenolics content (TPC), antioxidant activity (DPPH, FRAP, ABTS), carbohydrate content, and main polyphenols composition (HPLC) were determined at optimal conditions. An experimental total yield of 66.5% was obtained with a TPC value of 33.6 mg GAE/g DW and polysaccharides content of 345.4 mg glucose/g DW. A high antioxidant activity was also shown by the three methods tested. The results showed the potential of carob pods skin as a natural source of phenolic compounds, in particular gallic acid, and the effectiveness of MAE as extraction technique for the revalorization of this agro-food waste.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of molecular weight on the formation of electrosprayed chitosan microcapsules as delivery vehicles for bioactive compounds

  • Gómez-Mascaraque, Laura G.
  • Sánchez Moragas, Gloria
  • López-Rubio, Amparo
The molecular weight of chitosan is one of its most determinant characteristics, which affects its processability and its performance as a biomaterial. However, information about the effect of this parameter on the formation of electrosprayed chitosan microcapsules is scarce. In this work, the impact of chitosan molecular weight on its electrosprayability was studied and correlated with its effect on the viscosity, surface tension and electrical conductivity of solutions. A Discriminant Function Analysis revealed that the morphology of the electrosprayed chitosan materials could be correctly predicted using these three parameters for almost 85% of the samples. The suitability of using electrosprayed chitosan capsules as carriers for bioactive agents was also assessed by loading them with a model active compound, (−)-epigallocatechin gallate (EGCG). This encapsulation, with an estimated efficiency of around 80% in terms of preserved antioxidant activity, showed the potential to prolong the antiviral activity of EGCG against murine norovirus via gradual bioactive release combined with its protection against degradation in simulated physiological conditions., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013. Gloria Sanchez was supported by the “Ramón y Cajal” Young Investigator Program. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1 and INIA grant RTA2014-00024-C04-03 for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stability and bioaccessibility of EGCG within edible micro-hydrogels. Chitosan vs. gelatin, a comparative study

  • Gómez-Mascaraque, Laura G.
  • Soler, Carla
  • López-Rubio, Amparo
Micro-hydrogels are very promising systems for the protection and controlled delivery of sensitive bioactives, but limited knowledge exists regarding the impact of this encapsulation on their bioaccessibility. In this work, two different hydrogel-forming biopolymers (gelatin and chitosan) were compared as wall materials for the microencapsulation of a model flavonoid, (−)-epigallocatechin gallate (EGCG). Results showed that gelatin was more adequate as wall material for the encapsulation of EGCG than chitosan, achieving higher encapsulation efficiencies (95% ± 6%), being more effective in delaying EGCG release and degradation in aqueous solution and exhibiting a 7 times higher bioaccessibility of the bioactive compound (in terms of antioxidant activity) after in-vitro gastrointestinal digestion. A very low bioaccessibility of EGCG in chitosan was observed, due to the neutralization of the carbohydrate in the basic simulating salivary conditions, thus precluding subsequent flavonoid release. Moreover, gelatin micro-hydrogels also hindered dimer formation during in-vitro digestion, thus suggesting greater bioavailability when compared with free EGCG., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013. The authors would like to thank the Spanish MINECO projectAGL2015-63855-C2-1 for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Use of the Electrospinning Coating Technique to Produce Antimicrobial Polyhydroxyalkanoate Materials Containing In Situ-Stabilized Silver Nanoparticles

  • Castro Mayorga, Jinneth Lorena
  • Fabra, María José
  • Cabedo, Luis
  • Lagarón Cabello, José María
Electro-hydrodynamic processing, comprising electrospraying and electrospinning techniques, has emerged as a versatile technology to produce nanostructured fiber-based and particle-based materials. In this work, an antimicrobial active multilayer system comprising a commercial polyhydroxyalkanoate substrate (PHA) and an electrospun PHA coating containing in situ-stabilized silver nanoparticles (AgNPs) was successfully developed and characterized in terms of morphology, thermal, mechanical, and barrier properties. The obtained materials reduced the bacterial population of <i>Salmonella enterica</i> below the detection limits at very low silver loading of 0.002 ± 0.0005 wt %. As a result, this study provides an innovative route to generate fully renewable and biodegradable materials that could prevent microbial outbreaks in food packages and food contact surfaces., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (AGL2015-63855-C2-1-R). Jinneth Lorena Castro-Mayorga is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of the Colombian Government. Maria Jose Fabra is recipient of a Ramon y Cajal contract from the Spanish Ministry of Economy and Competitiveness. Maria Reis from Universidade Nova de Lisboa, Lisbon, Portugal is acknowledged for supplying the PHBV18 material. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The impact of zinc oxide particle morphology as an antimicrobial and when incorporated in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) films for food packaging and food contact surfaces applications

  • Castro Mayorga, Jinneth Lorena
  • Fabra, María José
  • Pourrahim, A.M.
  • Olsson, R.T.
  • Lagarón Cabello, José María
In this work, zinc oxide (ZnO) micron and nano sized-particles with different morphologies were synthesized by aqueous precipitation and evaluated as antimicrobial agents against foodborne pathogens. The most effective bactericide system was selected to prepare active poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films by three different methods (i) direct melt-mixing, (ii) melt-mixing of preincorporated ZnO into PHBV18 (18 mol% valerate content) fiber mats made by electrospinning, and, (iii) as a coating of the annealed electrospun PHBV18/ZnO fiber mats over compression molded PHBV. Results showed that ZnO successfully improved the thermal stability of the PHBV18, being the preincorporation method the most efficient in mitigating the negative impact that the PHBV18 had on the thermal stability, barrier and optical properties of the PHBV films. Similar behavior was found for the coating structure although this film showed effective and prolonged antibacterial activity against Listeria monocytogenes. This study highlights the suitability of the PHBV/ZnO nanostructures for active food packaging and food contact surface applications., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (MAT2012-38947-C02-01 and AGL2015-63855-C2-1-R). J.L. Castro-Mayorga is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of Colombian Government. M. J. Fabra is recipient of a Ramon y Cajal contract from the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficacy of Cinnamaldehyde Against Enteric Viruses and Its Activity After Incorporation Into Biodegradable Multilayer Systems of Interest in Food Packaging

  • Fabra, María José
  • Castro Mayorga, Jinneth Lorena
  • Randazzo, Walter
  • Lagarón Cabello, José María
  • López-Rubio, Amparo
  • Aznar, Rosa
  • Sánchez Moragas, Gloria
Cinnamaldehyde (CNMA), an organic compound that gives cinnamon its flavor and odor, was investigated for its virucidal activity on norovirus surrogates, murine norovirus (MNV) and feline calicivirus (FCV), and hepatitis A virus (HAV). Initially, different concentrations of CNMA (0.1, 0.5 and 1 %) were individually mixed with each virus at titers of ca. 6–7 log10 TCID50/ml and incubated 2 h at 4 and 37 °C. CNMA was effective in reducing the titers of norovirus surrogates in a dose-dependent manner after 2 h at 37 °C, while HAV titers were reduced by 1 log10 after treatment with 1 % of CNMA. When incubation time was extended, HAV titers were reduced by 3.4 and 2.7 log10 after overnight incubation at 37 °C with 1 and 0.5 % of CNMA, respectively. Moreover, this paper analyzed, for the first time, the antiviral activity of adding an active electrospun interlayer based on zein and CNMA to a polyhydroxybutyrate packaging material (PHB) in a multilayer form. Biodegradable multilayer systems prepared with 2.60 mg/cm2 (~9.7 %) of CNMA completely inactivated FCV according to ISO 22196:2011, while MNV titers were reduced by 2.75 log10. When the developed multilayer films were evaluated after one month of preparation or at 25 °C, the antiviral activity was reduced as compared to freshly prepared multilayer films evaluated at 37 °C. The results show the excellent potential of this system for food contact applications as well as for active packaging technologies in order to maintain or extend food quality and safety., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) (RYC-2012-09950, AGL2015-63855-C2-1 and INIA Grant RTA2014-00024-C04-03). GS was supported by the “Ramón y Cajal” Young Investigator and MJF was recipient of a Juan de la Cierva contract from the MINECO. JLC-M was supported by the Departamento Administrativo de Ciencia, Tecnología e Innovación (Colciencias) of Colombian Government and WR by the “Student Mobility for Placement e SMP” Grant of the EU Life Learning Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antiviral properties of silver nanoparticles against norovirus surrogates and their efficacy in coated polyhydroxyalkanoates systems

  • Castro Mayorga, Jinneth Lorena
  • Randazzo, Walter
  • Fabra, María José
  • Lagarón Cabello, José María
  • Aznar, Rosa
  • Sánchez Moragas, Gloria
Silver nanoparticles (AgNP) have strong broad-spectrum antimicrobial activity and gained increased attention for the development of AgNP based products, including medical and food applications. Initially, the efficacy of AgNP and silver nitrate (AgNO3) was evaluated for inactivating norovirus surrogates, the feline calicivirus (FCV) and the murine norovirus (MNV). These norovirus surrogates were exposed to AgNO3 and AgNP solutions for 24 h at 25 °C and then analyzed by cell-culture assays. Both AgNP and silver ions significantly decreased FCV and MNV infectivity in a dose-dependent manner between concentrations of 2.1 and 21 mg/L. Furthermore, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films were prepared by depositing a coating of thermally post-processed electrospun PHBV18/AgNP fiber mats over compression moulded PHBV3 films. After 24 h exposure at 37 °C and 100% RH, no infectious FCV were recovered when in contact with the AgNP films while MNV titers decreased by 0.86 log. The morphology of the PHBV18 and PHBV18/AgNP fibers studied by SEM showed smooth and continuous fibers in both cases and the EDAX analysis confirmed the homogeneously distribution of AgNP into the coating and onto the PHBV3/PHBV18 layer. This study showed, for the first time, the suitability of the PHBV18/AgNP electrospun coating for antiviral surfaces., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) (RYC-2012-09950, RYC-2014-158, AGL2015-63855-C2-1-R and INIA grant RTA2014-00024-C04-03). GS and MJF were supported by the “Ramón y Cajal” Young Investigator from the MINECO (RYC-2012-09950 and RYC-2014-15842). JLC-M was supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of Colombian Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of microencapsulation within electrosprayed proteins on the formulation of green tea extract-enriched biscuits

  • Gómez-Mascaraque, Laura G.
  • Hernández Rojas, Marai
  • Tarancón, Paula
  • Tenon, Mathieu
  • Feuillère, Nicolas
  • Vélez Ruiz, Jorge
  • Fiszman, Susana
  • López-Rubio, Amparo
In this work, a green tea extract (GTE) was encapsulated within electrosprayed protein (i.e. gelatin and zein) microparticles, and the protective ability of both systems on the green tea catechins was assessed. The microparticles (with encapsulation efficiencies ∼90 g/100 g), proved to be very effective in stabilizing the catechins during a thermal treatment at 180 °C (12 min), preserving 85–90 g/100 g of their initial catechins content, while free GTE lost almost 40 g/100 g of its catechins content. In order to assess the impact of microencapsulation in a real food system, the GTE-loaded electrosprayed microparticles were added to biscuits dough. Results showed that microencapsulation did not significantly protect during biscuit processing and emphasized the need of assessing the behaviour of microencapsulation systems in real food processing conditions. The sensorial analysis of the biscuits indicated that addition of the GTE-loaded microparticles did not impact the acceptability of the biscuits, as perceived by consumers., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1 for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of (−)-epigallocatechin gallate at different pH conditions on enteric viruses

  • Falcó, Irene
  • Randazzo, Walter
  • Gómez-Mascaraque, Laura G.
  • Aznar, Rosa
  • López-Rubio, Amparo
  • Sánchez Moragas, Gloria
Epigallocatechin gallate (EGCG), a flavonoid from green tea, is said to have extensive antimicrobial activity in a wide range of food spoilage or pathogenic fungi, yeast and bacteria. In this work, the antiviral activity of EGCG was assessed against hepatitis A virus (HAV) and murine norovirus (MNV), a human norovirus surrogate, at different temperatures, contact times and pH conditions by cell-culture methods. EGCG was effective in reducing the titers of HAV and MNV in a dose-dependent manner at neutral pH and 25 and 37 °C, while no effect was reported at 4 °C. HAV and MNV infectivity was completely removed after overnight treatment with EGCG at 2.5 mg/mL at 37 °C. Furthermore, results also revealed that EGCG was very effective inactivating MNV and HAV at neutral and alkaline pH but was ineffective at pH 5.5. Results from cell-culture assays and viability RT-qPCR assays indicated that EGCG did not dramatically affect viral capsid, which instead may suffer subtle alterations of proteins. Moreover, HPLC/MS analysis of catechin solutions at different pHs indicated that antiviral activity was most likely due to catechin derivatives rather than EGCG itself, given the evolution of these compounds at the various pH conditions tested. These findings suggest that green tea catechins appear to be a suitable natural option for foodborne viral reduction., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) (RYC-2012-09950 and AGL2015-63855-C2-1) and the Spanish National Institute for Agriculture and Food Research and Technology (INIA) co-financed by the European Social Fund (Project RTA2014-00024-C03). Financial support has been co-sponsored by the European Regional Development Fund. GS was supported by the “Ramón y Cajal” Young Investigator. Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microencapsulation structures based on protein-coated liposomes obtained through electrospraying for the stabilization and improved bioaccessibility of curcumin

  • Gómez-Mascaraque, Laura G.
  • Casagrande Sipoli, Caroline
  • de La Torre, Lucimara Gaziola
  • López-Rubio, Amparo
Novel food-grade hybrid encapsulation structures based on the entrapment of phosphatidylcholine liposomes, within a WPC matrix through electrospraying, were developed and used as delivery vehicles for curcumin. The loading capacity and encapsulation efficiency of the proposed system was studied, and the suitability of the approach to stabilize curcumin and increase its bioaccessibility was assessed. Results showed that the maximum loading capacity of the liposomes was around 1.5% of curcumin, although the loading capacity of the hybrid microencapsulation structures increased with the curcumin content by incorporation of curcumin microcrystals upon electrospraying. Microencapsulation of curcumin within the proposed hybrid structures significantly increased its bioaccessibility (∼1.7-fold) compared to the free compound, and could successfully stabilize it against degradation in PBS (pH = 7.4). The proposed approach thus proved to be a promising alternative to produce powder-like functional ingredients., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013. The authors would like to thank the Spanish MINECO projects AGL2012-30647 and AGL2015-63855-C2-1-R for financial support. Authors would also like to thank the Laboratory for Analytical Resources and Calibration (LRAC) at UNICAMP for the characterization services, and Prof. Dr. Rosiane Lopes da Cunha from the Laboratory of Process Engineering (UNICAMP) for granting the use of their equipment acquired from FAPESP Financial support (project numbers 2009/54137-1 and 2011/06083-0)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Potential of microencapsulation through emulsion-electrospraying to improve the bioaccesibility of β-carotene

  • Gómez-Mascaraque, Laura G.
  • Perez-Masiá, Rocío
  • González-Barrio, Rocío
  • Periago, María Jesús
  • López-Rubio, Amparo
The development of carotenoid-enriched functional foods is limited by the low bioaccessibility of these bioactive compounds. The aim of this work was to improve the bioaccessibility of β-carotene after in-vitro digestion through its encapsulation within electrosprayed protein microparticles. Two different protein matrices (zein and a whey protein concentrate, WPC) and two emulsification procedures (high-speed homogenization and ultrasonication) were used to prepare the microcapsules through emulsion-electrospraying, using a soy bean oil as lipid carrier, and the impact of the emulsion properties on the microencapsulation efficiency (MEE) and the bioaccessibility of β-carotene was studied. Results showed that the stability of the prepared emulsions was the main factor affecting the microencapsulation efficiency. The application of an ultrasonic treatment was necessary to stabilize the WPC emulsions and increase the MEE of the WPC microcapsules, but had a slight negative impact on the total β-carotene content of the zein particles, due to thermal degradation of β-carotene, without significantly affecting their MEE. The highest MEE was achieved for the capsules obtained from zein emulsions (34 ± 7%). All the encapsulation structures, except those obtained from WPC emulsions prepared by high-speed homogenization, increased the bioaccessibility of β-carotene after in-vitro digestion, which was negligible in its free form., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1 for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of Acetic Acid on the Survival of L. plantarum upon Microencapsulation by Coaxial Electrospraying

  • Gómez-Mascaraque, Laura G.
  • Ambrosio-Martín, Jesús
  • Pérez Masiá, Rocío
  • López-Rubio, Amparo
In this work, coaxial electrospraying was used for the first time to microencapsulate probiotic bacteria, specifically Lactobacillus plantarum, within edible protein particles with the aim of improving their resistance to in vitro digestion. The developed structures, based on an inner core of whey protein concentrate and an outer layer of gelatin, were obtained in the presence of acetic acid in the outer solution as a requirement for the electrospraying of gelatin. Despite the limited contact of the inner suspension and outer solution during electrospraying, the combination of the high voltage used during electrospraying with the presence of acetic acid was found to have a severe impact on the lactobacilli, not only decreasing initial viability but also negatively affecting the survival of the bacteria during storage and their resistance to different stress conditions, including simulated in vitro digestion., Laura G. Gómez-Mascaraque is a recipient of a predoctoral contract from the Spanish Ministry of Economy and Competitiveness (MINECO), Call 2013. This work was financially supported by the Spanish MINECO Projects AGL2012-30647 and AGL2015-63855-C2-1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dietary polyphenols bind to potato cells and cellular components

  • Gómez-Mascaraque, Laura G.
  • Dhital, Sushil
  • López-Rubio, Amparo
  • Gidley, Michael J.
The ability of phenolic compounds to bind to dietary polysaccharides such as starch and plant cell wall components impacts their nutritional value. Here, we report interactions between potato cells and three different phenolic compounds (+)-catechin, phloridzin and vanillic acid. The binding interactions of the phenolic compounds with intact potato cells, as well as disrupted cells, cooked cells, isolated cell walls and starch granules was explored varying polyphenol concentration, pH and incubation time. Results showed that binding capacity depends on the type of phenolic compound ((+)-catechin > phloridzin > vanillic acid) as well as the type of substrate, to a maximum of ∼50 µmol/g (dry weight). The observed differences (p < 0.05) were ascribed to the amount and accessibility of potential binding sites in both the phenolic compounds and the polysaccharides. Remarkably, polyphenols could penetrate intact cells and bind the starch within them, suggesting their potential as delivery vehicles, whose loading capacity more than doubled after cooking., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), Call 2013. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1-R and the Australian Research Council Centre of Excellence in Plant Cell Walls (CE110001007) for financial support and Meena Shrestha for her help with the total starch analysis assay., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A step forward towards the design of a continuous process to produce hybrid liposome/protein microcapsules

  • Gómez-Mascaraque, Laura G.
  • Casagrande Sipoli, Caroline
  • Gaziola de La Torre, Lucimara
  • López-Rubio, Amparo
Microfluidics and electrospraying, two revolutionary technologies with industrial potential for the microencapsulation of lipophilic bioactive ingredients, have been combined to produce hybrid liposome/protein microencapsulation structures in a semi-continuous process, reducing the number of steps required for their manufacture. Three different microfluidic mixing devices, one of them consisting of a simple straight microchannel (cross junction design) and the other two exhibiting patterned microchannels with different geometries (Tesla and ‘splitting and recombination’ designs), were used to mix a liposome suspension with a whey protein concentrate dispersion. The Tesla design showed the best mixing performance, as observed by fluorescence microscopy, so it was selected to be assembled to an electrospraying apparatus. The proposed in-line setup was successfully used to produce the micron-sized encapsulation structures, as observed by scanning electron microscopy., Laura G. Gómez-Mascaraque is recipient of a predoctoral contract from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), Call 2013. The authors would like to thank the Spanish MINECO projects AGL2012-30647 and AGL2015-63855-C2-1-R for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antimicrobial nanocomposites and electrospun coatings based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and copper oxide nanoparticles for active packaging and coating applications

  • Castro Mayorga, Jinneth Lorena
  • Fabra, María José
  • Cabedo, Luis
  • Sánchez Moragas, Gloria
  • Lagarón Cabello, José María
Active biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) melt mixed nanocomposites and bilayer structures containing copper oxide (CuO) nanoparticles were developed and characterized. The bilayer structures consisted of a bottom layer of compression molded PHBV3 (3% mol valerate) coated with an active electrospun fibers mat made with CuO nanoparticles and PHBV18 (18% valerate) derived from microbial mixed cultures and cheese whey. The results showed that the water vapor permeability increased with the CuO addition while the oxygen barrier properties were slightly enhanced by the addition of 0.05 wt % CuO nanoparticles to nanocomposite films but a negligible effect was registered for the bilayer structures. However, the mechanical properties were modified by the addition of CuO nanoparticles. Interestingly, by incorporating highly dispersed and distributed CuO nanoparticles in a coating by electrospinning, a lower metal oxide loading was required to exhibit significant bactericidal and virucidal performance against the food-borne pathogens Salmonella enterica, Listeria monocytogenes, and murine norovirus. The biodisintegration tests of the samples under composting conditions showed that even the 0.05% CuO-coated structures biodegraded within 35 days., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (project AGL2015–63855-C2–1-R). J.L.C.-M. is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of Colombian Government. M.J.F. is recipient of a Ramon y Cajal contract from the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biosynthesis of silver nanoparticles and polyhydroxybutyrate nanocomposites of interest in antimicrobial applications

  • Castro Mayorga, Jinneth Lorena
  • Freitas, F.
  • Reis, M.A.M.
  • Prieto, María Auxiliadora
  • Lagarón Cabello, José María
This study deals with the optimization and scaling up of the production of poly(3-hydroxybutyrate), PHB, nanocomposites containing biosynthesized silver nanoparticles (AgNPs) to generate materials with antimicrobial performance. First, a comparative study of the chemical and biological synthesis of AgNPs during the fermentation process of Cupriavidus necator at shake flask-scale was carried out. These experiments demonstrated the inherent capacity of C. necator to reduce the silver salt and produce AgNPs without the need for adding a reducing agent and, that the method of synthesis (with or without reducing agent) affects the dispersion of the AgNPs and their antimicrobial performance. Finally, the process was scaled-up to a 10 Liters bioreactor and the relevant physical properties of the PHB-AgNPs nanocomposites pressed into films were determined. From the characterization work, the AgNPs were found to be well dispersed and distributed into the polymer matrix, having a maximum frequency of particles with average diameter of 76–95 nm. Moreover, the presence of AgNPs did not cause any effect on the thermal properties of the biopolymer, although a slight reduction in crystallinity was seen. The developed materials presented a strong antimicrobial activity against the food-borne pathogens Salmonella enterica and Listeria monocytogenes, which makes them potentially suitable for active coatings and packaging applications. Complete biodisintegration of the samples occurred during composting conditions within the first 40 days. Interestingly, the presence of the AgNPs did not impair the profile of biodegradation of the microbial polymer., The authors would like to thank to the Active and intelligent fibre-based packaging – innovation and market introduction (ActInPak) COST Action FP1405 for the funding of the Short Therm Scientific Mission, to Octavio Cedenilla from the Instituto de Ciencias Agrarias-CSIC for the ICP-OES analysis and to Dr. Luis Cabedo, from Universitat Jaume I for his support with WAXD analyses and biodisintegration tests. Research leading to these results has received funding from the Comunidad de Madrid (P2013/MIT2807) and the Spanish Ministry of Economy and Competitiveness, (BIO2013-44878-R and AGL2015-63855-C2-1-R). Jinneth Lorena Castro-Mayorga is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of the Colombian Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development and characterization of chitosan/gelatin electrosprayed microparticles as food grade delivery vehicles for anthocyanin extracts

  • Atay, Elif
  • Fabra, María José
  • Martínez Sanz, Marta
  • Gómez-Mascaraque, Laura G.
  • López-Rubio, Amparo
This work reports on the development of electrosprayed chitosan/gelatin microparticles for encapsulation purposes. Initially, the effects of the chitosan molecular weight (Mw), biopolymers and solvent composition on solution properties and capsule formation were investigated. Results demonstrated that the sprayability of the blend solutions was mainly determined by a critical range of solids content, which was needed for chain entanglement and subsequent capsule formation, and by their rheological properties. SAXS experiments from selected electrospraying solutions showed that clustered networks between both biopolymers were formed due to the electrostatic interactions between the positively charged amino groups in chitosan and negatively charged amino acid residues in gelatin. As a model bioactive extract, an anthocyanin-rich black carrot extract (BCE) was loaded into selected chitosan/gelatin electrosprayed structures and the encapsulation efficiency and release into two food simulants (ethanol 10% and acetic acid 3%) was evaluated. Faster and greater release was observed in the acetic acid medium as expected and the results showed that the main factor affecting the bioactive release was the blend composition, i.e. increasing the chitosan content of the formulations limited BCE release., Financial support from the Spanish Ministry of Economy, Industry and Competitiveness MINECO (AGL2015-63855-C2-1-R project) and the financial support of EU FEDER funds. L.G. Gómez-Mascaraque is recipient of a predoctoral contract (BES-2013-065883) from MINECO. M. Martínez-Sanz and M.J. Fabra are recipients of Juan de la Cierva (IJCI-2015-23389) and Ramon y Cajal (RYC-2014-158) contracts from MINECO, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembled gelatin-ι-carrageenan encapsulation structures for intestinal-targeted release applications

  • Gómez-Mascaraque, Laura G.
  • Llavata Cabrero, Beatriz
  • Martínez Sanz, Marta
  • Fabra, María José
  • López-Rubio, Amparo
In this work, natural biopolymeric encapsulation structures were developed through the self-assembly of gelatin and ι-carrageenan in aqueous solutions. The interactions of this binary system and of a ternary system containing a polyphenol-rich extract were deeply explored for the development of intestinal delivery systems. The processing of the structures (extrusion vs. freeze-drying) greatly influenced release properties, explained by the specific interactions between gelatin and polyphenols, thus allowing for tuning the processing conditions depending on the desired target application. Release was further controlled by incorporating a divalent salt, giving raise to extract-loaded ι-carrageenan/gelatin capsules with adequate release profiles for intestinal targeted delivery. These results demonstrate the potential of exploiting biopolymer interactions for designing bioactive delivery systems using environmentally friendly processes which do not involve the use of toxic or harsh solvents or cross-linkers., L. G. Gómez-Mascaraque, M. Martinez-Sanz and M. J. Fabra are recipients of a predoctoral (BES-2013-065883), Juan de la Cierva (IJCI-2015-23389) and Ramón y Cajal (RYC-2014-158) contracts from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), respectively. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1-R for financial support. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (2016021658 project)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication

Superhydrophobic Bilayer Coating Based on Annealed Electrospun Ultrathin Poly(ε-caprolactone) Fibers and Electrosprayed Nanostructured Silica Microparticles for Easy Emptying Packaging Applications

  • Lasprilla-Botero, Juliana
  • Torres-Giner, Sergio
  • Pardo Figuérez, María
  • Álvarez-Láinez, Mónica
  • Lagarón Cabello, José María
A coating rendering superhydrophobic properties to low-density polyethylene (LDPE) films used in packaging applications was herein generated by means of the electrohydrodynamic processing (EHDP) technique. To this end, electrospun ultrathin poly(ε-caprolactone) (PCL) fibers, followed by electrosprayed nanostructured silica (SiO<sub>2</sub>) microparticles, were deposited on top of the LDPE film. Various electrospinning and electrospraying times were tested and optimized followed by a thermal post-treatment to provide physical adhesion between the bilayer coating and the LDPE substrate. The morphology, hydrophobicity, permeance to limonene, and thermal stability of the resultant nanostructured coatings were characterized. It was observed that by controlling both the deposition time of the electrospun ultrathin PCL fibers and the electrosprayed SiO<sub>2</sub> microparticles, as well as the conditions of the thermal post-treatment, effective superhydrophobic coatings were developed onto the LDPE films. The resultant multilayer presented a hierarchical micro/nanostructured surface with an apparent contact angle of 157° and a sliding angle of 8°. The addition of silica reduced, to some extent, the limonene (aroma) barrier, likely due to the increased surface-to-volume ratio, which allowed permeant sorption to occur but improved the thermal stability of the LDPE/PCL film. As a result, the developed multilayer system of LDPE/PCL/SiO<sub>2</sub> has significant potential for use in easy-to-empty packaging applications of high water activity products., This study was funded by the EU H2020 project OPTINANOPRO (reference number 686116) and the MINECO project AGL2015-63855-C2-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospun Oxygen Scavenging Films of Poly(3-hydroxybutyrate) Containing Palladium Nanoparticles for Active Packaging Applications

  • Cherpinski, Adriane
  • Gozutok, Melike
  • Sasmazel, Hilal Turkoglu
  • Torres-Giner, Sergio
  • Lagarón Cabello, José María
This paper reports on the development and characterization of oxygen scavenging films made of poly(3-hydroxybutyrate) (PHB) containing palladium nanoparticles (PdNPs) prepared by electrospinning followed by annealing treatment at 160 ◦C. The PdNPs were modified with the intention to optimize their dispersion and distribution in PHB by means of two different surfactants permitted for food contact applications, i.e., hexadecyltrimethylammonium bromide (CTAB) and tetraethyl orthosilicate (TEOS). Analysis of the morphology and characterization of the chemical, thermal, mechanical, and water and limonene vapor barrier properties and the oxygen scavenging capacity of the various PHB materials were carried out. From the results, it was seen that a better dispersion and distribution was obtained using CTAB as the dispersing aid. As a result, the PHB/PdNP nanocomposites containing CTAB provided also the best oxygen scavenging performance. These films offer a significant potential as new active coating or interlayer systems for application in the design of novel active food packaging structures., This research has received funding from the Spanish Ministry of Economy and Competitiveness (MINECO, project AGL2015-63855-C2-1-R) and the EU H2020 project YPACK (reference number 773872)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dragon’s blood sap: storage stability and antioxidant activity

  • Escobar, Juan D.
  • Prieto López, Cristina
  • Pardo Figuérez, María
  • Lagarón Cabello, José María
Currently, consumers are demanding additive-free, fresher, and more-natural products. Dragon’s Blood Sap (DBS), the deep red latex of the specie of tree Croton lechleri (Müll. Arg.), contains a high concentration of phenolic compounds of great interest for the food, pharmaceutical, and cosmetic industries. These chemical compounds are highly susceptible to degradation. Therefore, DBS storage stability and its photo-oxidation was studied by Fourier transform infrared spectroscopy (FT-IR) and UV-Vis spectrophotometry for 39 days at different temperatures (4–21 °C) and relative humidities (0–56%), as well as under UV light exposure. It was observed that the degradation of phenolic compounds was reduced at 0% relative humidity (RH), not showing a significant effect of temperature in the range studied. UV light irradiation degraded DBS in a 20%. DBS has an exceptional high and stable antioxidant content (≥93% inhibition percentage of DPPH), which makes it a unique property to consider the DBS as an antioxidant agent or ingredient for consumer products formulations., This research was funded by MINECO grant numbers [AGL2015-63855-C2-1-R and DI-14-6906]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospun Poly(ethylene-co-vinyl alcohol)/Graphene Nanoplatelets Composites of Interest in Intelligent Food Packaging Applications

  • Torres-Giner, Sergio
  • Echegoyen Sanz, Yolanda
  • Teruel-Juanes, Roberto
  • Badía, José D.
  • Ribes-Greus, Amparo
  • Lagarón Cabello, José María
Graphene nanoplatelets (GNPs) were synthetized from graphite powder and, thereafter, embedded in poly(ethylene-co-vinyl alcohol) (EVOH) fibers by electrospinning in the 0.1–2 wt.-% range. The morphological, chemical, and thermal characterization performed on the electrospun nanocomposite fibers mats revealed that the GNPs were efficiently dispersed and rolled along the EVOH fibrilar matrix up to contents of 0.5 wt.-%. Additionally, the dielectric behavior of the nanocomposite fibers was evaluated as a function of the frequency range and GNPs content. The obtained results indicated that their dielectric constant rapidly decreased with the frequency increase and only increased at low GNPs loadings while the nanocomposite fiber mats became electrically conductive, with the maximum at 0.5 wt.-% GNPs content. Finally, the electrospun mats were subjected to a thermal post-treatment and dark films with a high contact transparency were obtained, suggesting that the nanocomposites can be used either in a nonwoven fibers form or in a continuous film form. This study demonstrates the potential of electrospinning as a promising technology to produce GNPs-containing materials with high electrical conductivity that can be of potential interest in intelligent packaging applications as “smart” labels or tags., This research was funded by the European Regional Development Funds (ERDF) and Ministry of Science, Innovation, and Universities (MICIU) project numbers ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R, UPOV13-3E-1947, and AGL2015-63855-C2-1-R. Acknowledgments: S.T.-G. acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675). J.D.B. and R.T.-J. also thank Generalitat Valenciana (GV) for their projects APOSTD14/041 and GRISOLIA/2012/003, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ductility and Toughness Improvement of Injection-Molded Compostable Pieces of Polylactide by Melt Blending with Poly(ε-caprolactone) and Thermoplastic Starch

  • Quiles-Carrillo, Luis
  • Montanes, Néstor
  • Pineiro, Fede
  • Jorda-Vilaplana, Amparo
  • Torres-Giner, Sergio
The present study describes the preparation and characterization of binary and ternary blends based on polylactide (PLA) with poly(ε-caprolactone) (PCL) and thermoplastic starch (TPS) to develop fully compostable plastics with improved ductility and toughness. To this end, PLA was first melt-mixed in a co-rotating twin-screw extruder with up to 40 wt % of different PCL and TPS combinations and then shaped into pieces by injection molding. The mechanical, thermal, and thermomechanical properties of the resultant binary and ternary blend pieces were analyzed and related to their composition. Although the biopolymer blends were immiscible, the addition of both PCL and TPS remarkably increased the flexibility and impact strength of PLA while it slightly reduced its mechanical strength. The most balanced mechanical performance was achieved for the ternary blend pieces that combined high PCL contents with low amounts of TPS, suggesting a main phase change from PLA/TPS (comparatively rigid) to PLA/PCL (comparatively flexible). The PLA-based blends presented an “island-and-sea” morphology in which the TPS phase contributed to the fine dispersion of PCL as micro-sized spherical domains that acted as a rubber-like phase with the capacity to improve toughness. In addition, the here-prepared ternary blend pieces presented slightly higher thermal stability and lower thermomechanical stiffness than the neat PLA pieces. Finally, all biopolymer pieces fully disintegrated in a controlled compost soil after 28 days. Therefore, the inherently low ductility and toughness of PLA can be successfully improved by melt blending with PCL and TPS, resulting in compostable plastic materials with a great potential in, for instance, rigid packaging applications., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R, and by the EU H2020 project YPACK (reference number 773872). L.Q.-C. wants to thank Generalitat Valenciana (GV) for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812). S.T.-G. also acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Use of Electrosprayed Agave Fructans as Nanoencapsulating Hydrocolloids for Bioactives

  • Ramos-Hernández, Jorge A.
  • Ragazzo Sánchez, Juan Arturo
  • Calderón-Santoyo, Montserrat
  • Ortiz-Basurto, Rosa I.
  • Prieto López, Cristina
  • Lagarón Cabello, José María
High degree of polymerization Agave fructans (HDPAF) are presented as a novel encapsulating material. Electrospraying coating (EC) was selected as the encapsulation technique and β-carotene as the model bioactive compound. For direct electrospraying, two encapsulation methodologies (solution and emulsion) were proposed to find the formulation which provided a suitable particle morphology and an adequate concentration of β-carotene encapsulated in the particles to provide a protective effect of β-carotene by the nanocapsules. Scanning electron microscopy (SEM) images showed spherical particles with sizes ranging from 440 nm to 880 nm depending on the concentration of HDPAF and processing parameters. FTIR analysis confirmed the interaction and encapsulation of β-carotene with HDPAF. The thermal stability of β-carotene encapsulated in HDPAF was evidenced by thermogravimetric analysis (TGA). The study showed that β-carotene encapsulated in HDPAF by the EC method remained stable for up to 50 h of exposure to ultraviolet (UV) light. Therefore, HDPAF is a viable option to formulate nanocapsules as a new encapsulating material. In addition, EC allowed for increases in the ratio of β-carotene:polymer, as well as its photostability., This research was funded by MINECO project grant number AGL2015-63855-C2-1-R. The authors would like to thank the “Plan de Movilidad AGARED 2017” (“AGARED-Red Temática Mexicana Aprovechamiento Integral Sustentable y Biotecnología de los Agaves”; the MINECO project AGL2015-63855-C2-1-R for funding and the CONACYT (Mexico) for the scholarship granted to Jorge AlbertoRamos-Hernández., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antimicrobial and Antioxidant Performance of Various Essential Oils and Natural Extracts and Their Incorporation into Biowaste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Layers Made from Electrospun Ultrathin Fibers

  • Figueroa-Lopez, Kelly J.
  • Vicente, António
  • Reis, M.A.M.
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
In this research, the antibacterial and antioxidant properties of oregano essential oil (OEO), rosemary extract (RE), and green tea extract (GTE) were evaluated. These active substances were encapsulated into ultrathin fibers of poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) (PHBV) derived from fruit waste using solution electrospinning, and the resultant electrospun mats were annealed to produce continuous films. The incorporation of the active substances resulted in PHBV films with a relatively high contact transparency, but it also induced a slightly yellow appearance and increased the films opacity. Whereas OEO significantly reduced the onset of thermal degradation of PHBV, both the RE and GTE-containing PHBV films showed a thermal stability profile that was similar to the neat PHBV film. In any case, all the active PHBV films were stable up to approximately 200 °C. The incorporation of the active substances also resulted in a significant decrease in hydrophobicity. The antimicrobial and antioxidant activity of the films were finally evaluated in both open and closed systems for up to 15 days in order to anticipate the real packaging conditions. The results showed that the electrospun OEO-containing PHBV films presented the highest antimicrobial activity against two strains of food-borne bacteria, as well as the most significant antioxidant performance, ascribed to the films high content in carvacrol and thymol. Therefore, the PHBV films developed in this study presented high antimicrobial and antioxidant properties, and they can be applied as active layers to prolong the shelf life of the foods in biopackaging applications., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 project YPACK (reference number 773872), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospun antimicrobial films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) containing eugenol essential oil encapsulated in mesoporous silica nanoparticles

  • Meléndez-Rodríguez, Beatriz
  • Figueroa-Lopez, Kelly J.
  • Bernardos, Andrea
  • Martínez-Máñez, Ramón
  • Cabedo, Luis
  • Torres-Giner, Sergio
  • Lagarón Cabello, José María
The main goal of this study was to develop poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) (PHBV) films with long-term antimicrobial capacity of interest in food packaging applications. To this end, eugenol was first highly efficiently encapsulated at 50 wt.-% in the pores of mesoporous silica nanoparticles by vapor adsorption. The eugenol-containing nanoparticles were then loaded in the 2.5–20 wt.-% range into PHBV by electrospinning and the resultant electrospun composite fibers were annealed at 155 °C to produce continuous films. The characterization showed that the PHBV films filled with mesoporous silica nanoparticles containing eugenol present sufficient thermal resistance and enhanced mechanical strength and barrier performance to water vapor and limonene. The antimicrobial activity of the films was also evaluated against foodborne bacteria for 15 days in open vs. closed conditions in order to simulate real packaging conditions. The electrospun PHBV films with loadings above 10 wt.-% of mesoporous silica nanoparticles containing eugenol successfully inhibited the bacterial growth, whereas the active films stored in hermetically closed systems increased their antimicrobial activity after 15 days due to the volatile portion accumulated in the system’s headspace and the sustained release capacity of the films. The resultant biopolymer films are, therefore, potential candidates to be applied in active food packaging applications to provide shelf life extension and food safety., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers AGL2015-63855-C2-1-R and MAT2015-64139-C4-1-R, by the Generalitat Valenciana (GVA) PROMETEO/2018/024 program, and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oxygen-Scavenging Multilayered Biopapers Containing Palladium Nanoparticles Obtained by the Electrospinning Coating Technique

  • Cherpinski, Adriane
  • Szewczyk, Piotr K.
  • Gruszczyński, Adam
  • Stachewicz, Urszula
  • Lagarón Cabello, José María
The main goal of this study was to obtain, for the first time, highly efficient water barrier and oxygen-scavenging multilayered electrospun biopaper coatings of biodegradable polymers over conventional cellulose paper, using the electrospinning coating technique. In order to do so, poly(3-hydroxybutyrate) (PHB) and polycaprolactone (PCL) polymer-containing palladium nanoparticles (PdNPs) were electrospun over paper, and the morphology, thermal properties, water vapor barrier, and oxygen absorption properties of nanocomposites and multilayers were investigated. In order to reduce the porosity, and to enhance the barrier properties and interlayer adhesion, the biopapers were annealed after electrospinning. A previous study showed that electrospun PHB-containing PdNP did show significant oxygen scavenging capacity, but this was strongly reduced after annealing, a process that is necessary to form a continuous film with the water barrier. The results in the current work indicate that the PdNP were better dispersed and distributed in the PCL matrix, as suggested by focus ion beam-scanning electron microscopy (FIB-SEM) experiments, and that the Pd enhanced, to some extent, the onset of PCL degradation. More importantly, the PCL/PdNP nanobiopaper exhibited much higher oxygen scavenging capacity than the homologous PHB/PdNP, due to most likely, the higher oxygen permeability of the PCL polymer and the somewhat higher dispersion of the Pd. The passive and active multilayered biopapers developed here may be of significant relevance to put forward the next generation of fully biodegradable barrier papers of interest in, for instance, food packaging., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the H2020 EU YPACK (reference number 773872) and ResUrbis (Reference number 730349), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste

  • Montava-Jordà, Sergi
  • Torres-Giner, Sergio
  • Ferrándiz-Bou, Santiago
  • Quiles-Carrillo, Luis
  • Montanes, Néstor
This study presents the valorization of cotton waste from the textile industry for the development of sustainable and cost-competitive biopolymer composites. The as-received linter of recycled cotton was first chopped to obtain short fibers, called recycled cotton fibers (RCFs), which were thereafter melt-compounded in a twin-screw extruder with partially bio-based polyethylene terephthalate (bio-PET) and shaped into pieces by injection molding. It was observed that the incorporation of RCF, in the 1–10 wt% range, successfully increased rigidity and hardness of bio-PET. However, particularly at the highest fiber contents, the ductility and toughness of the pieces were considerably impaired due to the poor interfacial adhesion of the fibers to the biopolyester matrix. Interestingly, RCF acted as an effective nucleating agent for the bio-PET crystallization and it also increased thermal resistance. In addition, the overall dimensional stability of the pieces was improved as a function of the fiber loading. Therefore, bio-PET pieces containing 3–5 wt% RCF presented very balanced properties in terms of mechanical strength, toughness, and thermal resistance. The resultant biopolymer composite pieces can be of interest in rigid food packaging and related applications, contributing positively to the optimization of the integrated biorefinery system design and also to the valorization of textile wastes., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) through the AGL2015-63855-C2-1-R and MAT2017-84909-C2-2-R program numbers, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced interfacial adhesion of polylactide/poly(ε-caprolactone)/walnut shell flour composites by reactive extrusion with maleinized linseed oil

  • Montava-Jordà, Sergi
  • Quiles-Carrillo, Luis
  • Richart, Nuria
  • Torres Giner, Sergio
  • Montanes, Néstor
Novel green composites were prepared by melt compounding a binary blend of polylactide (PLA) and poly(ε-caprolactone) (PCL) at 4/1 (wt/wt) with particles of walnut shell flour (WSF) in the 10–40 wt % range, which were obtained as a waste from the agro-food industry. Maleinized linseed oil (MLO) was added at 5 parts per hundred resin (phr) of composite to counteract the intrinsically low compatibility between the biopolymer blend matrix and the lignocellulosic fillers. Although the incorporation of WSF tended to reduce the mechanical strength and thermal stability of PLA/PCL, the MLO-containing composites filled with up to 20 wt % WSF showed superior ductility and a more balanced thermomechanical response. The morphological analysis revealed that the performance improvement attained was related to a plasticization phenomenon of the biopolymer blend and, more interestingly, to an enhancement of the interfacial adhesion of the green composites achieved by extrusion with the multi-functionalized vegetable oil., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers AGL2015-63855-C2-1-R and MAT2017-84909-C2-2-R. L.Q.-C. holds a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) whereas S.T.-G. is a recipient of a Juan de la Cierva—Incorporación contract (IJCI-2016-29675) from MICIU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of gelatin-coated ι-carrageenan hydrogel capsules by electric field-aided extrusion. Impact of phenolic compounds on their performance

  • Gómez-Mascaraque, Laura G.
  • Martínez Sanz, Marta
  • Fabra, María José
  • López-Rubio, Amparo
The aim of this work was to develop edible encapsulation structures based on gelatin-coated ι-carrageenan hydrogel beads, and to study the impact of incorporating different phenolic compounds within them in their microstructure, physic-chemical properties and release performance. The developed capsules were produced in aqueous solutions and mild conditions (i.e. suitable for food applications and sensitive bioactive compounds) by electric field-aided extrusion of ι-carrageenan solutions onto a gelatin bath containing calcium chloride, and exhibited shape-memory behaviour upon re-hydration in water after freeze-drying. The impact of loading them with gallic acid, catechin, chlorogenic acid and tannic acid was evaluated, and the results showed that only tannic acid could be efficiently incorporated within the hydrogel structures, while it limited the binding of the gelatin coating and altered the structure and thermal properties of the capsules. Reducing the concentration of tannic acid minimised its impact on the structure of the beads without negatively affecting its release, which was found to be however affected by the capsule size. The potential of these structures for the encapsulation of hydrophobic compounds was also anticipated., M. Martínez-Sanz and M. J. Fabra were recipients of a Juan de la Cierva (IJCI-2015-23389) and Ramón y Cajal (RYC-2014-158) contracts, respectively, from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), respectively. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1-R for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crosslinked electrospun zein-based food packaging coatings containing bioactive chilto fruit extracts

  • Moreno, María Alejandra
  • Orqueda, María Eugenia
  • Gómez-Mascaraque, Laura G.
  • Isla, María Inés
  • López-Rubio, Amparo
In this work, zein fibers loaded with phenolic-enriched extracts from pulp, seed and skin of orange chilto were collected on polyhydroxyalkanoate (PHA) films through the electrospinning technique, for their potential use as bioactive internal coatings for food packaging applications. The zein fibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). The water stability of the zein fibers was improved by crosslinking with glutaraldehyde vapors. The encapsulation efficiency of all bioactive phenolic-enriched extracts was greater than 90%. Encapsulation in the zein fibers improved the thermostability of the extracts. Two food simulants (50% ethanol and 3% acetic acid) were used to evaluate the release of the extracts from the crosslinked zein fibers. It was observed that crosslinking delayed the release of phenolic compounds (rosmarinic acid, caffeic acid and its derivates) in both solvents (80% released after 7 days of contact in 50% ethanol and 23 days in 3% acetic acid) and their antioxidant properties were kept. Therefore, this work demonstrates the potential of the developed zein-based encapsulation structures containing chilto extracts to be applied as antioxidant coatings in food packaging structures to contribute to the preservation of both hydrophilic and lipophilic food products., This research was supported by grants from Secretaría de Ciencia, Arte e Innovación Tecnológica de la Universidad Nacional de Tucumán, Argentina (SCAIT-UNT), Consejo Nacional de Investigaciones Científicas y Técnicas, Argentina (CONICET), the Spanish MINECO project AGL2015-63855-C2-1, Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT), ARCOR Award to Technological Innovation (Argentina) in Edition 2015 and EMHE-CSIC (Grant MHE-200038)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Food-grade gliadin microstructures obtained by electrohydrodynamic processing

  • Sharif, Niloufar
  • Golmakani, Mohammad-Taghi
  • Niakousari, Mehrdad
  • Ghorani, Behrouz
  • López-Rubio, Amparo
This paper presents a comprehensive study on the electrohydrodynamic processing of gliadin to develop food-grade delivery systems with different morphologies. The effects of biopolymer concentration, applied voltage and solution flow-rate on particle morphology, molecular organisation, crystallinity and thermal properties were investigated. Gliadin concentration influenced the apparent viscosity and conductivity of the solutions, giving raise to particle morphologies at 10 wt% gliadin and beaded-free fibers above 25 wt% gliadin. In general, increasing the voltage resulted in smaller average sizes of the obtained structures, while no significant differences in morphology were observed among the tested flow rates. Interestingly, the amide I position in the FTIR reflected changes in protein conformation which could be correlated with the final morphology attained. Moreover, the acetic acid used for solution preparation disrupted the original amino acid chain packing of the gliadin fraction, being the electrospun/electrosprayed samples amorphous. These gliadin-based microparticles and microfibers obtained could serve as food-grade delivery vehicles., The authors gratefully acknowledge the financial support of the Research Affairs Office at Shiraz University (Grant #93GCU1M1981). The authors acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness MINECO (AGL2015-63855-C2-1-R project) and the financial support of EU FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stabilization of a saffron extract through its encapsulation within electrospun/electrosprayed zein structures

  • Alehosseini, Ali
  • Gómez-Mascaraque, Laura G.
  • Ghorani, B.
  • López-Rubio, Amparo
In this work, electrospinning and electrospraying techniques were used to encapsulate the sensitive bioactive compounds of a saffron extract (i.e. picrocrocin, safranal, and crocin) using zein as protective matrix. Initially, a dried saffron extract (DSE) was obtained and characterized and was subsequently incorporated within zein solutions prepared at two concentrations (10% w/v for capsules and 20% for fiber development). The greatest encapsulation efficiency was observed for the fiber samples, with retention values for picrocrocin, safranal, and crocin of up to 97, 88, and 97%, respectively. The stability of the free and encapsulated extract when exposed to UV light, different pH (2, 7.4) and temperatures (25, 75 °C) was also studied. The photostability of crocin and safranal was significantly (p < 0.05) increased upon encapsulation. Similarly, while about 98% of the non-encapsulated crocin degraded after 15 h of exposure to acetic acid at 75 °C, only 67.23% of the encapsulated compound was lost under the same conditions. The release profiles of crocin, safranal and picrocrocin from the encapsulation structures were fitted using the Peppas-Sahlin model (R2 = 0.98), showing that the dominant release mechanism was diffusion. Finally, the encapsulation structures retained their integrity upon contact with water, highlighting their potential use as food packaging coatings., A. Alehosseini received a scholarship by the Ministry of Science, Research and Technology (MSRT) of Iran. The authors would like to thank the Spanish MINECO project AGL2015-63855-C2-1 for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospun β-carotene-loaded SPI:PVA fiber mats produced by emulsion-electrospinning as bioactive coatings for food packaging

  • Pinheiro Bruni, Graziella
  • de Oliveira, Jean Paulo
  • Gómez-Mascaraque, Laura G.
  • Fabra, María José
  • Guimarães Martins, Vilásia
  • Zavarezea, Elessandra da Rosa
  • López-Rubio, Amparo
In this work, emulsion electrospinning was used to develop an active internal coating for food packaging applications. Specifically, the antioxidant molecule β-carotene, was encapsulated in a mixture of soy protein isolate (SPI) and polyvinyl alcohol (PVA) which was directly electrospun onto a polyhydroxybutyrate-co-valerate (PHB92/PHV8) film. An annealing treatment was applied to improve the adhesion of the electrospun mat onto the packaging film, which contributed to modulate the release of the active compound. Stable SPI:PVA emulsions (with a 50:50 ratio) were developed using soybean oil (SBO) as carrier of the hydrophobic β-carotene. The encapsulation efficiency of β-carotene in the electrospun SPI:PVA fibers was 65.0 % ± 2.6 %, being 51.4 % ± 0.9 % effectively incorporated into their cores. Finally, the in-vitro release assay of the antioxidant in soybean oil, which simulates fatty foods, demonstrated that the heat treatment (anneling) contributed to a slower and more sustained released of the bioactive compound., We would like to thank CAPES (88887.124727/2014-00), CNPq (448800/2014-4), FAPERGS (16/2551-0000250-9), SCT-RS and Pólo de Inovação Tecnológica em Alimentos da Região Sul. M. J. Fabra is recipient of a Ramón y Cajal (RYC-2014-158) contract from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). The authors would also like to thank the Spanish MINECO project AGL2015-63855-C2-1-R for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation, characterization and antimicrobial properties of electrospun polylactide films containing Allium ursinum L. extract

  • Radusin, T.
  • Torres-Giner, Sergio
  • Stupar, A.
  • Ristic, I.
  • Miletic, A.
  • Novakovic, A.
  • Lagarón Cabello, José María
Novel active films of polylactide (PLA) containing extract of Allium ursinum L. (AU), also called wild garlic, at 10 wt% were succesfully prepared by the electrospinning technology. Electrospinning of the AU-containing PLA solutions yielded fibers in the 1–2 μm range with a beaded-like morphology, suggesting that the AU extract was mainly encapsulated in certain fiber regions. The resultant electrospun mats were then subjected to annealing at 135 °C to obtain continuous films of application interest in active packaging. The film cross-sections revealed that the AU extract was incorporated into the PLA matrix in the form of micro-sized droplets. The thermal properties showed that the AU extract addition plasticized the PLA matrix and also lowered its crystallinity degree as it disrupted the ordering of the PLA chains by hindering their folding into the crystalline lattice. Thermal stability analysis indicated that the natural extract positively contributed to a delay in thermal degradation of the biopolymer and it was thermally stable when encapsulated in the PLA film. The AU extract incorporation also produced a mechanical reinforcement on the electrospun PLA films and improved slightly the water barrier performance. Finally, a significant antimicrobial activity of the electrospun PLA films containing the natural extract was achieved against foodborne bacteria., This paper has been supported by the COST Action FP1405 Active and intelligent fiber-based packaging - innovation and market introduction (ActInPak), FOODStars project Food Product Development Cycle: Frame for stepping Up Research Excellence of FINS (Grant Agreement 692276), the Spanish Ministry of Science, Innovation, and Universities (MICIU, project AGL2015-63855-C2-1-R) and the EU H2020 project YPACK (reference number 773872). Torres-Giner also acknowledges MICIU for his Juan de la Cierva-Incorporación contract (IJCI-2016-29675)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reactive melt mixing of poly(3-hydroxybutyrate)/rice husk flour composites with purified biosustainably produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Aldureid, Abdulaziz
  • Cabedo, Luis
  • Lagarón Cabello, José María
Novel green composites based on commercial poly(3-hydroxybutyrate) (PHB) filled with 10 wt % rice husk flour (RHF) were melt-compounded in a mini-mixer unit using triglycidyl isocyanurate (TGIC) as compatibilizer and dicumyl peroxide (DCP) as initiator. Purified poly(3- hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed bacterial cultures derived from fruit pulp waste was then incorporated into the green composite in contents in the 5-50 wt % range. Films for testing were obtained thereafter by thermo-compression and characterized. Results showed that the incorporation of up to 20 wt % of biowaste derived PHBV yielded green composite films with a high contact transparency, relatively low crystallinity, high thermal stability, improved mechanical ductility, and medium barrier performance to water vapor and aroma. This study puts forth the potential use of purified biosustainably produced PHBV as a cost-effective additive to develop more affordable and waste valorized food packaging articles., This research was supported by the Spanish Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva-Incorporación contract (IJCI-2016-29675), respectively. The authors also thank the Joint Unit in Polymers Technology between IATA–CSIC and PIMA-Universitat Jaume I., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation and characterization of electrospun pectin-based films and their application in sustainable aroma barrier multilayer packaging

  • Akinalan Balik, Busra
  • Argin, Sanem
  • Lagarón Cabello, José María
  • Torres Giner, Sergio
Pectin was first dissolved in distilled water and blended with low contents of polyethylene oxide 2000 (PEO2000) as the carrier polymer to produce electrospun fibers. The electrospinning of the water solution of pectin at 9.5 wt% containing 0.5 wt% PEO2000 was selected as it successfully resulted in continuous and non-defected ultrathin fibers with the highest pectin content. However, annealing of the resultant pectin-based fibers, tested at different conditions, developed films with low mechanical integrity, high porosity, and also dark color due to their poor thermal stability. Then, to improve the film-forming process of the electrospun mats, two plasticizers, namely glycerol and polyethylene glycol 900 (PEG900), were added to the selected pectin solution in the 2–3 wt% range. The optimal annealing conditions were found at 150 °C with a pressure of 12 kN load for 1 min when applied to the electrospun pectin mats containing 5 wt% PEO2000 and 30 wt% glycerol and washed previously with dichloromethane. This process led to completely homogenous films with low porosity and high transparency due to a phenomenon of fibers coalescence. Finally, the selected electrospun pectin-based film was applied as an interlayer between two external layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by the electrospinning coating technology and the whole structure was annealed to produce a fully bio-based and biodegradable multilayer film with enhanced barrier performance to water vapor and limonene., This study was supported by the Turkish Scientific and Technological Research Council (TUBITAK) 2214-A International Research Fellowship Programme for PhD Students and by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers AGL2015-63855-C2-1-R. S.T.-G. is a recipient of a Juan de la Cierva—Incorporación contract (IJCI-2016-29675) from MICIU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of the Influence of the Reprocessing Cycles on the Final Properties of Polylactide Pieces Obtained by Injection Molding

  • Agüero, Ángel
  • Morcillo, Maria del Carmen
  • Quiles-Carrillo, Luis
  • Balart, Rafael
  • Boronat, Teodomiro
  • Lascano, Diego
  • Torres Giner, Sergio
  • Fenollar, Octavio
© 2019 by the authors., This research work aims to study the influence of the reprocessing cycles on the mechanical, thermal, and thermomechanical properties of polylactide (PLA). To this end, PLA was subjected to as many as six extrusion cycles and the resultant pellets were shaped into pieces by injection molding. Mechanical characterization revealed that the PLA pieces presented relatively similar properties up to the third reprocessing cycle, whereas further cycles induced an intense reduction in ductility and toughness. The effect of the reprocessing cycles was also studied by the changes in the melt fluidity, which showed a significant increase after four reprocessing cycles. An increase in the bio-polyester chain mobility was also attained with the number of the reprocessing cycles that subsequently favored an increase in crystallinity of PLA. A visual inspection indicated that PLA developed certain yellowing and the pieces also became less transparent with the increasing number of reprocessing cycles. Therefore, the obtained results showed that PLA suffers a slight degradation after one or two reprocessing cycles whereas performance impairment becomes more evident above the fourth reprocessing cycle. This finding suggests that the mechanical recycling of PLA for up to three cycles of extrusion and subsequent injection molding is technically feasible., This research was funded by by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bioactive Multilayer Polylactide Films with Controlled Release Capacity of Gallic Acid Accomplished by Incorporating Electrospun Nanostructured Coatings and Interlayers

  • Quiles Carrillo, Luis
  • Montanes, Néstor
  • Lagarón Cabello, José María
  • Balart, Rafael
  • Torres Giner, Sergio
The present research reports on the development of bi- and multilayer polylactide (PLA) films by the incorporation of electrospun nanostructured PLA coatings and interlayers containing the antioxidant gallic acid (GA) at 40 wt% onto cast-extruded PLA films. To achieve the bilayer structures, submicron GA-loaded PLA fibers were applied on 200-µm cast PLA films in the form of coatings by electrospinning for 1, 2, and 3 h. For the multilayers, the cast PLA films were first coated on one side by electrospinning, then sandwiched with 10-µm PLA film on the other side, and the resultant whole structure was finally thermally post-treated at 150 °C without pressure. Whereas the bilayer PLA films easily delaminated and lacked transparency, the multilayers showed sufficient adhesion between layers and high transparency for deposition times during electrospinning of up to 2 h. The incorporation of GA positively contributed to delaying the thermal degradation of PLA for approximately 10 °C, as all films were thermally stable up to 345 °C. The in vitro release studies performed in saline medium indicated that the GA released from the bilayer PLA films rapidly increased during the first 5 h of immersion while it stabilized after 45–250 h. Interestingly, the PLA multilayers offered a high sustained release of GA, having the capacity to deliver the bioactive for over 1000 h. In addition, in the whole tested period, the GA released from the PLA films retained most of its antioxidant functionality. Thus, during the first days, the bilayer PLA films can perform as potent vehicles to deliver GA while the multilayer PLA films are able to show a sustained release of the natural antioxidant for extended periods., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R and by the EU H2020 project YPACK (reference number 773872).L.Q.-C. wants to thank Generalitat Valenciana (GV) for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812). S.T.-G. acknowledges MICIU for his Juan de la Cierva–Incorporación contract (IJCI-2016-29675)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved Process to Obtain Nanofibrillated Cellulose (CNF) Reinforced Starch Films with Upgraded Mechanical Properties and Barrier Character

  • Granda, Luis Angel
  • Oliver-Ortega, Helena
  • Fabra, María José
  • Tarrés, Quim
  • Pèlach, Maria Àngels
  • Lagarón Cabello, José María
  • Méndez, José Alberto
© 2020 by the authors., Nowadays, the interest on nanofibrillated cellulose (CNF) has increased owing to its sustainability and its capacity to improve mechanical and barrier properties of polymeric films. Moreover, this filler shows some drawbacks related with its high capacity to form aggregates, hindering its dispersion in the matrix. In this work, an improved procedure to optimize the dispersability of CNF in a thermoplastic starch was put forward. On the one hand, CNF needs a hydrophilic dispersant to be included in the matrix, and on the other, starch needs a hydrophilic plasticizer to obtain a thermoformable material. Glycerol was used to fulfil both targets at once. CNF was predispersed in the plasticizer before nanofibrillation and later on was included into starch, obtaining thin films. The tensile strength of these CNF–starch composite films was 60% higher than the plain thermoplastic starch at a very low 0.36% w/w percentage of CNF. The films showed a noticeable correlation between water uptake, and temperature and humidity. Regarding permeability, a ca. 55% oxygen and water vapor permeability drop was found by nanofiller loading. The hydrolytic susceptibility of the composite was confirmed, being similar to that of the thermoplastic starch., This research was funded by University of Girona through the Program of the Improvement of the Scientific Production and the MINECO project AGL2015-63855-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comparative study on the effect of different reactive compatibilizers on injection‐molded pieces of bio‐based high‐density polyethylene/polylactide blends

  • Quiles-Carrillo, L.
  • Montanes, N.
  • Jorda‐Vilaplana, A.
  • Balart, Rafael
  • Torres-Giner, S.
The present study reports on the development of binary blends consisting of bio‐based high‐density polyethylene (bio‐HDPE) with polylactide (PLA), in the 5–20 wt % range, prepared by melt compounding and then shaped into pieces by injection molding. In order to enhance the miscibility between the green polyolefin and the biopolyester, different reactive compatibilizers were added during the melt‐blending process, namely polyethylene‐grafted maleic anhydride (PE‐g‐MA), poly(ethylene‐co‐glycidyl methacrylate) (PE‐co‐GMA), maleinized linseed oil (MLO), and a combination of MLO with dicumyl peroxide (DCP). Among the tested compatibilizers, the dual addition of MLO and DCP provided the binary blend pieces with the most balanced mechanical performance in terms of rigidity and impact strength as well as the highest thermal stability. The fracture surface of the binary blend piece processed with MLO and DCP revealed the formation of a continuous structure in which the dispersed PLA phase was nearly no discerned in the bio‐HDPE matrix. The resultant miscibility improvement was ascribed to both the high solubility and plasticizing effect of MLO on the PLA phase as well as the crosslinking effect of DCP on both biopolymers. The latter effect was particularly related to the formation of macroradicals of each biopolymer that, thereafter, led to the in situ formation of bio‐HDPE‐co‐PLA copolymers and also to the development of a partially crosslinked network in the binary blend. As a result, cost‐effective and fully bio‐based polymer pieces with improved mechanical strength, high toughness, and enhanced thermal resistance were obtained., This research was funded by the EU H2020 project YPACK (reference number 773872) and by the Ministry of Science, Innovation, and Universities (MICIU, project numbers MAT2017‐84909‐C2‐2‐R and AGL2015‐63855‐C2‐1‐R). Quiles‐Carrillo and Torres‐Giner are recipients of a FPU grant (FPU15/03812) from the Spanish Ministry of Education, Culture, and Sports (MECD) and a Juan de la Cierva contract (IJCI‐2016‐29675) from the MICIU, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ compatibilization of biopolymer ternary blends by reactive extrusion with low-functionality epoxy-based styrene–acrylic oligomer

  • Quiles-Carrillo, L.
  • Montanes, N.
  • Lagarón Cabello, José María
  • Balart, Rafael
  • Torres-Giner, S.
The present study reports on the use of low-functionality epoxy-based styrene–acrylic oligomer (ESAO) to compatibilize immiscible ternary blends made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), polylactide (PLA), and poly(butylene adipate-co-terephthalate) (PBAT). The addition during melt processing of low-functionality ESAO at two parts per hundred resin (phr) of biopolymer successfully changed the soften inclusion phase in the blend system to a thinner morphology, yielding biopolymer ternary blends with higher mechanical ductility and also improved oxygen barrier performance. The compatibilization achieved was ascribed to the in situ formation of a newly block terpolymer, i.e. PHBV-b-PLA-b-PBAT, which was produced at the blend interface by the reaction of the multiple epoxy groups present in ESAO with the functional terminal groups of the biopolymers. This chemical reaction was mainly linear due to the inherently low functionality of ESAO and the more favorable reactivity of the epoxy groups with the carboxyl groups of the biopolymers, which avoided the formation of highly branched and/or cross-linked structures and thus facilitated the films processability. Therefore, the reactive blending of biopolymers at different mixing ratios with low-functionality ESAO represents a straightforward methodology to prepare sustainable plastics at industrial scale with different physical properties that can be of interest in, for instance, food packaging applications., This research was funded by the EU H2020 project YPACK (Reference number 773872) and by the Spanish Ministry of Science, Innovation, and Universities (MICIU) with project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. L. Quiles-Carrillo wants to thank the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through his FPU Grant Number FPU15/03812. Torres-Giner also acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Preparation and Characterization of Electrospun Films of Poly (3- hydroxybutyrate-co-3-hydroxyvalerate) Derived From Fruit Pulp Biowaste for Food Biopackaging

  • Meléndez-Rodríguez, Beatriz
  • Castro Mayorga, Jinneth Lorena
  • Reis, M.A.M.
  • Sammon,C.
  • Cabedo, Luis
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
Comunicación al congreso 1st NANOGATEWAY International Scientific Conference, Braga (Portugal) Octubre 2018, Industrial by-product residues management is the main goal to maintain resource conservation and the quality of the environment. The growing concern for plastic waste disposal of petroleum-based materials has intensified the study and development of bio-based and biodegradable polymers, particularly those synthesized from agro-industrial residues [1]. Recently, biopolymers are used to replace petroleum-based synthetic polymers to reduce the non-renewable energy consumption and the carbon dioxide emission [2]. This work reports different methods to purify, namely non-extraction, extraction with sodium hypochlorite (NaClO) (sample 1), and extraction with chloroform (sample 2) of a circular economy based and potentially low-cost poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed microbial cultures derived from fruit pulp, an industrial by-product of the juice industry. The highest yield obtained was 40% with sample 2 and it was the most optimal solution for its processing via electrospinning. After thermal post-processed of the resultant ultrathin fiber mats, in order to obtain continuous films adequate for food packaging applications, the films were characterized in terms of morphology, crystallinity as well as thermal, mechanical, and barrier properties. Different results in their characteristics were found depending on the purification applied. The results showed that sample 2 presented the highest degree of purity, resulting in more transparent films with lower wettability and higher flexibility. Therefore, there are a great potential as interlayers or coatings for food biopackaging applications for these electrospun films made of biomass derived from biowaste [3]., The authors would like to thank the Unidad Asociada IATA-UJI Plastics Technology and the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R and the H2020 EU projects YPACK (reference number 773872) and RES URBIS (reference number 730349) for funding. BM-R and ST-G would also like to thank the MINECO’s FPI (BES-2016-077972) and Juan de la Cierva (IJCI-2016-29675) programs, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospraying assisted by pressurized gas as an innovative high-throughput process for the microencapsulation and stabilization of docosahexaenoic acid-enriched fish oil in zein prolamine

  • Busolo, M. A.
  • Torres-Giner, Sergio
  • Prieto López, Cristina
  • Lagarón, José María
Zein, a prolamine obtained from maize, was employed to encapsulate a fish oil highly enriched with docosahexaenoic acid (DHA) by an innovative process termed electrospraying assisted by pressurized gas (EAPG). This technology combines high electric voltage with pneumatic spray to yield a high-throughput encapsulation process. Semi-spherical zein flowable capsules with mean sizes of 1.4 μm containing the DHA-enriched fish oil were produced by EAPG from inert ethanol solutions at room conditions, presenting a high encapsulation efficiency. The oxidative stability tests carried out in the zein microcapsules obtained by EAPG showed that the DHA-enriched fish oil was efficiently protected over storage time. Sensory tests were also performed on fortified reconstituted milk with the freshly prepared zein/DHA-enriched fish oil microcapsules, suggesting negligible oxidation effects after 45 days. The results described herein indicate that EAPG is a promising innovative high-throughput electrospraying-based methodology for the encapsulation of bioactives and, therefore, the resultant DHA-enriched fish oil containing microcapsules can be industrially applied for the formulation of fortified foods. Industrial relevance: An innovative process, termed electrospraying assisted by pressurized gas (EAPG), is herein originally presented as a novel encapsulation methodology. This technology is based on the combination of high voltage and pneumatic spray, allowing the formation of microcapsules at room temperature conditions. Thus, EAPG shows a great deal of potential to encapsulate nutraceuticals and other bioactives that are sensitive to thermal degradation and/or oxidation. The resultant bioactive-containing capsules can be, thereafter, applied to develop novel fortified food products., The authors would like to thank the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R and to the H2020 EU project YPACK (reference number 773872) for funding., Peer reviewed