Skip to main content

LAB ON CHIP MULTIPARAMETRICOS PARA APLICACIONES AEROESPACIALES, MEDIOAMBIENTALES, AGROALIMENTARIAS Y BIOMEDICAS

CTQ2017-85011-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An LTCC monolithic microreactor for the synthesis of carbon dots with photoluminescence imaging of the reaction progress

  • Berenguel-Alonso, Miguel|||0000-0002-3759-3634
  • Ortiz-Gómez, Inmaculada|||0000-0003-4677-2383
  • Fernández, Belén|||0000-0001-9987-1495
  • Couceiro, Pedro|||0000-0001-5539-2441
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Capitan-Vallvey, Luis Fermín|||0000-0002-7112-3601
  • Salinas-Castillo, Alfonso|||0000-0002-1360-6699
  • Puyol, Mar|||0000-0002-9274-2284
This work describes the development of a fully integrated Low Temperature Co-fired Ceramic (LTCC)microreactor for the synthesis of carbon dots (CDots). The microreactor integrates fluidics, a heating resistor and an optical window for fluorescence imaging of the reaction progress in a monolithic, all ceramic device, ensuring homogeneous surface chemistry and physical properties. A pool of different CDots was synthesized at high temperature and pressure using a hydrothermal method, demonstrating the robustness of the microreactor. The synthesis was monitored by following the photoluminescence of the produced CDots, and the reaction conditions were optimized according to their Quantum Yield (QY)and the flow pattern inside the microchannel. The obtained CDots exhibited blue photoluminescence upon irradiation with UV light with QYs of up to 0.77. The CDots were screened as metal nanoprobes and bioimaging contrast agents.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Testing of a novel automated point-of-care analyzer for blood ammonium monitoring in a clinical setting

  • Rebollo Calderón, Beatriz|||0000-0001-5968-8004
  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Ormazábal, Aida
  • Artuch, R.|||0000-0002-3422-9685
  • Rosell Ferrer, Javier|||0000-0002-9691-328X
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Puyol, Mar|||0000-0002-9274-2284
Certain diseases are marked by elevated ammonium levels in the blood, a condition known as hyperammonemia. Prompt detection and medical intervention are crucial to prevent potentially fatal outcomes. Therefore, ammonium levels should be monitored regularly, typically in referral hospitals where specialized and costly equipment is available. Although compact commercial devices are available for this purpose, none of them meet all the technical and analytical requirements needed for direct blood analysis, and current reported strategies have not been validated with enough samples to confirm results reliably. We present a robust and reliable automated point-of-care (POC) analyzer for the potentiometric determination of ammonium in blood. Comprising three computer-controlled modules-fluid management, detection, and data acquisition and transmission-this system combines portability, ease of use, and affordability. It can directly measure untreated blood samples, significantly reducing analysis time. Fully automated, it operates unsupervised with minimal lab personnel intervention. Analytical quality parameters include 5% RSD repeatability (n = 8), a limit of detection of 24 μM, a working range of 30-1000 µM and a sample volume of 215 µL. Successfully implemented in a hospital for 2 months, it analyzed 238 blood samples in parallel with the hospital's reference method showing comparable results (paired t-test, Passing-Bablok regression and Bland-Altman Plot) and randomly distributed errors, with a 4% accuracy calculated as mean error. Results indicate the POC analyzer effectiveness and reliability in a clinical setting compared to currently reported or commercially available equipment, being suitable for bedside monitoring of conditions associated with hyperammonemia in healthcare centers, including emergency rooms and clinics in developing countries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microanalyser prototype for on-line monitoring of copper(II) ion in mining industrial processes

  • Guevara Amatón, Karla Victoria
  • Tavares, Nuno
  • Coto-Fuentes, Hesner|||0000-0002-9548-7864
  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Sández, Natàlia|||0000-0003-1712-3552
  • Moreno Casillas, Héctor Aurelio|||0000-0003-0740-6209
  • Valdés-Perezgasga, Francisco|||0000-0002-7176-3641
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
A microanalyzer prototype for copper(II) ion monitoring in mining industrial processes is presented. The microanalyzer is designed as an assembly of di_erent modules, each module being responsible for a unit operation. In order to optimize the industrial processes, the microanalyzer can automate all sample management, signal processing, and mathematical calculations and wirelessly transfer data to a control room. The determination of copper(II) ion is done using a colorimetric reaction and the microanalyser performs autocalibration by in situ dilution of a stock solution, matching the higher analyte concentration of the working range defined for the sample to be determined, using a multicommutation approach. The performance of the microanalyzer for monitoring copper(II) ion in water effuents of mining facilities was optimized in the working range from 1 to 10 mg/L to match Mexican environmental law regulations, which allow a maximum concentration of 4 mg/L of copper(II) ion in these circumstances.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biomedical point-of-care microanalyzer for potentiometric determination of ammonium ion in plasma and whole blood

  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Rebollo Calderón, Beatriz|||0000-0001-5968-8004
  • Ormazábal, Aida
  • Artuch, R.|||0000-0002-3422-9685
  • Rosell Ferrer, Javier|||0000-0002-9691-328X
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Puyol, Mar|||0000-0002-9274-2284
Some inborn errors of metabolism and other diseases can result in increasing blood ammonium (hyperammonemia episodes), which can cause serious neurological complications in patients or even death. Early diagnosis, follow up and treatment are essential to minimize irreversible damages in brain. Currently, adequate analytical instrumentation for the necessary ammonium bedside determination is not available in all health centers but only in clinical laboratories of reference hospitals. We therefore have developed a low cost and portable potentiometric Point-of-Care microanalyzer (POC) to address this problem. It consists of a cyclic olefin copolymer-based microanalyzer, the size of a credit card and working in continuous flow, which integrates microfluidics, a gas-diffusion module and a potentiometric detection system. The analytical features achieved are a linear range from 30 to 1000 μmol L NH , a detection limit of 18 μmol L NH and a required sample volume of 100 μL, which comply with the medical requirements. Plasma and blood samples are analyzed with no significant differences observed between ammonium concentrations obtained with both the proposed microanalyzer and the reference method. This demonstrates the value of the developed POC for bedside clinical applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Rapid warning microanalyzer for heavy metals monitoring in natural waters

  • Pascual-Esco, Alex
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Puyol, Mar|||0000-0002-9274-2284
A warning microanalyzer for the rapid monitoring of different heavy metals in water using Carbon Dots (CDs) as selective optical reagents is presented. The synthesized CDs have different surface functionalization and exhibit selective fluorescence quenching by heavy metal ions, that combined with the use of microfluidics, provide sensitivity, ease of automation and reproducibility to the method. Moreover, they present maximum excitation wavelengths around 350 nm, allowing multiparametric analysis with a single light source. Although quantum yields range from 16 % to 78 % depending on the type of CDs, enough sensitivity is achieved for each heavy metal using the same measurement conditions of the optical detection system (lock-in modulating frequency, signal amplitude and measurement frequency). The microanalyzer is composed of a Cyclic Olefin Copolymer (COC) analytical microsystem, a flow management system, and a miniaturized customized optical detection system. In this paper, we demonstrate that our proposed system can be used as a toxicity control system by selectively measuring five different heavy metal ions (Co, Cu, Hg, Ni, and Pb) with detection limits ranging from 2 to 12 ppb. Spiked tap water samples were analyzed, giving recoveries from 98 % to 134 %. Polluted samples containing four of the five heavy metal ions studied (Co, Cu, Ni, and Pb) were also analyzed with no significant differences observed between both methods, the proposed microanalyzer and the reference method (ICP-OES).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Serum/plasma potassium monitoring using potentiometric point-of-care microanalyzers with improved ion selective electrodes

  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Arasa-Puig, Eva|||0000-0002-0702-0069
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Puyol, Mar|||0000-0002-9274-2284
Different causes can trigger imbalances on homeostatic mechanisms between intracellular and extracellular compartments resulting in abnormal blood potassium concentrations (hypo or hyperkalemia). This can lead to serious consequences, even a life-threatening situation. Early diagnosis, treatment and follow-up are essential to minimize critical impacts in patients. Bedside determination of blood potassium is not accessible in all health care centers or in all emergency departments and far less common in this kind of centers in emerging countries. We have therefore proposed a portable, economic and long-lifetime potentiometric point-of-care (POC) analytical microsystem to deal with this question. It is a continuous flow microfluidic platform, made of cyclic olefin copolymer (COC), which combines microfluidics and a detection system based on the potentiometric technique containing a potassium selective electrode with a novel composition of polymeric membrane, which improves lifetime. Its size is smaller than a credit card and shows a linear range of Nernst calibration equation from 1 to 26 mM K+, a detection limit of 0.16 mM K+, a satisfactory repeatability and reproducibility, and an analysis frequency of 20 samples h-1, requiring only 25 μL as sample volume. Moreover, lifetime is as long as 9 months by intensive use. All these features comply with medical requirements. Human serum samples were analyzed with the developed device and the obtained results were compared with those provided by two methods: ICP-OES and another using ion selective electrodes. No significant differences were observed, demonstrating the suitability of the developed POC microanalyzer for bedside health applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Live synthesis of selective carbon dots as fluorescent probes for cobalt determination in water with an automatic microanalyzer

  • Pascual-Esco, Alex
  • Lleonart, Pere
  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Puyol, Mar|||0000-0002-9274-2284
A new strategy integrating the straight synthesis of carbon dots (CDs) and their direct use for the determination of heavy metals by means of fuorescence quenching is presented. The proposal consists of a modular analyzer, which includes a low temperature co-fred ceramics (LTCC) microreactor for the synthesis of CDs and a cyclic olefn copolymer (COC) microfuidic platform, which automatically performs a reverse fow injection analysis (rFIA) protocol for the determination of heavy metal ions in water by CD fuorescence quenching. As a proof of concept, nitrogen-doped CDs were synthesized from acrylic acid and ethylenediamine (ED) with quantum yields (QYs) of up to 44%, which are selective to cobalt. With the described system, we synthesized homogeneous CDs without the need for further purifcation and with the minimum consumption of reagents, and optimized fuorescence measurements can be performed with freshly obtained luminescent nanomaterials that have not undergone decomposition processes. They have an averagehydrodynamic diameter of 4.2±0.9 nm and maximum excitation and emission wavelengths at 358 nm and 452 nm, respectively. The system allows the automatic dilution and bufering of the synthesized CDs and the sample prior to the determination of cobalt. The concentration of cobalt was determined with good sensitivity and a limit of detection of 7 μg·L-1 with a linear range of 0.02-1 mg·L-1 of Co2+. Spiked tap water and river water samples were analyzed, obtaining recovery from 98 to 104%. This demonstrates the potential of the equipment as an efcient on-site control system for heavy metal monitoring in water.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly versatile and automated total ammonia nitrogen compact analyzer suitable for different types of water samples

  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
  • Puyol, Mar|||0000-0002-9274-2284
Continuous monitoring of total ammonia nitrogen (TAN) currently needs to improve further not only to meet optimal analytical features but also to reduce equipment maintenance needs and avoid manual intervention. The development, evaluation in different aqueous samples (fresh and wastewater) and validation of a fully automated and adaptable miniaturized potentiometric analytical instrument with this purpose are presented. The main goals accomplished are a wider and adaptable working range (0.08 to 1000 mg L-1 NH4+) with a detection limit of 0.03 mg L-1 and a significant reduction of reagent and sample consumption, as well as waste generation, compared to current commercial potentiometric flow analyzers. Moreover, different programmable calibration and sample analysis protocols have been successfully applied. Finally, suitable analytical features in terms of accuracy and precision are achieved even with samples with very complex matrices without any pretreatment required.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Automated analytical microsystem for the spectrophotometric monitoring of titratable acidity in white, rosé and red wines

  • Sández, Natàlia|||0000-0003-1712-3552
  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Vidigal, Susana S.M.P.|||0000-0002-0213-063X
  • Rangel, António O.S.S.|||0000-0002-6486-8947
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
The design, construction and evaluation of a low-cost cyclic olefin copolymer (COC)-based continuous flow microanalyzer with optical detection to determine the titratable acidity content of wine is here presented. The analysis method is based on the monitoring of the blue coloration decrease of a buffered bromothymol blue (BTB) solution in the presence of the acidic compounds of wine. The microanalyzer monolithically integrates the required microfluidic motifs as well as an optical flow cell where the measurements are performed by using a miniaturized and versatile photometric detection system. Fluid management is totally automated by the use of computer-controlled microvalves, permitting the automatic calibration of the system as well as the automatic sampling, including in-line dilution and analysis. The reduced size of the whole system along with its high simplicity and automation make it suitable for its application to the on-line monitoring of titratable acidity during wine-making processes. With the optimal conditions, a linear range up to 0.50 g L-1 tartaric acid, a quantification limit (LOQ) of 0.01 g L-1 and a detection limit (LOD) of 0.004 g L-1 were obtained, covering the most common acidity content of musts and wines. A sampling rate up to 26 h-1 could be achieved, consuming less than 3 mL of inexpensive reagents per analysis and requiring no pretreatment of the sample. The microsystem has been successfully applied to the quantification of the titratable acidity content of several wine samples, being the results in excellent agreement with the ones obtained by the reference method.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Soluble reactive phosphorous determination in wastewater treatment plants by automatic microanalyzers

  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Ymbern Llorens, Oriol|||0000-0003-1997-6794
  • Puyol, Mar|||0000-0002-9274-2284
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
The analysis of soluble reactive phosphate (SRP) in water is key to control water quality. In order to continuous monitor orthophosphate content in water during treatment processes and in the effluents of wastewater treatment plants, conventional procedures, usually performed in a laboratory, must be adapted. This means pursuing efforts on miniaturizing systems to operate in situ and automating analytical methods to work on-line. The design, construction and evaluation of an automatic and low cost cyclic olefin copolymer (COC)-based spectrophotometric microanalyzer, capable of operating in unattended conditions, is presented to monitor soluble reactive phosphorous, as orthophosphate ion, in wastewater samples coming from sewage treatment plants. The microsystem, constructed by CNC micromilling and using a multilayer approach, integrates microfluidics to carry out the phosphomolybdenum blue (PMB) reaction and an optical flow-cell for the spectrophotometric orthophosphate determination in a single polymeric substrate smaller than a credit card. It is connected to a compact optical detection system composed by a LED emitting at 660 nm and a PIN-photodiode, both integrated in a PCB. Flow management is automatically performed by programmed microvalves and micropumps, which control autocalibration processes and allow unattended operation. Analytical features after the optimization of the microfluidic platform and the chemical and the hydrodynamic variables, were a linear range from 0.09 to 32 mg L-1 P and a detection limit of 0.03 mg L-1 P with a sampling rate of 24 samples h-1, demonstrating the microanalyzer suitability for SRP monitoring in water. Moreover, real samples were analyzed obtaining promising results.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Monitoring of total potassium in winemaking processes using a potentiometric analytical microsystem

  • Calvo-López, Antonio|||0000-0003-2728-8676
  • Martinez-Bassedas, Ernest
  • Puyol, Mar|||0000-0002-9274-2284
  • Alonso-Chamarro, Julián|||0000-0002-6804-6027
Innovation in products and processes, traceability, food security and quality control are inherent challenges in agri-food sector. Trends in wine production are focused on obtaining natural wines with less chemical intervention. Following this goal, a low cost miniaturized, easy-to-use and highly automated microanalyzer to monitor total potassium in winemaking processes is presented. The microsystem monolithically integrates microfluidics as well as a potentiometric detection system and does not require any sample pretreatment. The analytical features provided are a linear range from 250 to 4000 mg L-1 K+, covering all the concentrations expected in must and wine samples, a detection limit of 75 ± 12 mg L-1 K+, and an adequate reproducibility and repeatability. Sample throughput is calculated at 20 h-1 with a waste volume generation lower than 4 mL per analysis. The microsystem lifetime is at least 4 months. Different wine and grape juice samples have been analyzed reaching outstanding results.