Skip to main content

CONTROL TOLERANTE A FALTAS Y PERTURBACIONES EN ACCIONAMIENTOS POLIFASICOS Y EN CONVERTIDORES ELECTRONICOS DE POTENCIA TRIFASICOS CONECTADOS A RED

DPI2016-75832-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Positive- and negative-sequence current controller with direct discrete-time pole placement for grid-tied converters with LCL filter

  • Pérez Estévez, Diego
  • Doval Gandoy, Jesús
  • Gómez Yepes, Alejandro
  • López Sánchez, Óscar
Traditionally, the current control of grid-tied converters with LCL filter is based on proportional-resonant or proportional-integral controllers, which often need an additional active damping method to achieve stability. These solutions do not permit to place the closed-loop poles in convenient locations when dealing with such high-order plants. This constraint results in degraded reference-tracking and disturbance-rejection responses. On the other hand, the existing methods based on direct pole placement or other modern control strategies, do not control with zero steady-state error both positive and negative sequences of the grid current, but only the positive one. This limitation is undesirable under unbalanced grid conditions. This paper presents a current controller for grid-tied converters with LCL filters based on direct discrete-time pole placement. The proposed controller makes it possible to control both positive and negative sequences of the grid-side current with zero steady-state error. Contrarily to the classical resonant controllers, the closed-loop poles can be placed in convenient locations, yielding a fast response with negligible overshoot and low controller effort. Moreover, no additional damping methods of the resonance are necessary to achieve stable operation, regardless of the switching frequency and LCL filter used. Simulation and experimental results that validate the proposal are presented., Agencia Estatal de Investigación | Ref. DPI2016-75832-R, Ministerio de Economía y Competitividad | Ref. BES-2013-063149
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Current harmonic compensation for

n
  • Gómez Yepes, Alejandro
  • Doval Gandoy, Jesús
  • Baneira Collazo, Fernando
  • Pérez Estévez, Diego
  • López Sánchez, Óscar
Low-order current harmonics arise in ac drives due to nonlinearities, producing torque ripple and extra losses. In multiphase machines, which offer advantages over three-phase ones, the latter is aggravated because some harmonics map in low-impedance no-torque subspaces. A multiple-resonant-controller (MRC) structure, combining resonant controllers and synchronous frames, was proposed for harmonic cancellation. It permits substantial computational saving over the multiple-synchronous-frame (MSF) strategy, which includes proportional-integral control in one synchronous frame per harmonic. However, such MRC method is only suitable for symmetrical winding arrangements (SWAs), while asymmetrical winding arrangements (AWAs) are also widespread. Adapting the MRC for AWAs is not straightforward, since the harmonic mapping differs significantly from SWAs, and the effect of neutral configurations on it is more complicated and has hardly been studied. In this paper, an MRC strategy for multiphase machines with AWA is developed. Different neutral configurations are considered; particularly, it is shown and taken into account that for a single isolated neutral, unlike with SWAs, certain subspaces are coupled and unbalanced. The optimum frequencies of the resonant controllers and synchronous frames are assessed. The computational burden of the MRC and MSF schemes is compared, and the differences with SWAs are established. Experimental results are provided, Xunta de Galicia | Ref. ED481B 2016/066-0, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Multifrequency current control including distortion-free saturation and antiwindup with enhanced dynamics

  • Gómez Yepes, Alejandro
  • Doval Gandoy, Jesús
  • Toliyat, Hamid A.
Output-voltage saturation (OVS) in voltage source converters can produce current-control windup. Many OVS and antiwindup (AWU) methods exist for a single-frequency current controller, but they cause additional distortion when applied to multifrequency current control. The latter is important, e.g., for reducing losses in various applications or torque ripple in ac drives. In the existing strategies with distortion-free OVS and AWU for multifrequency current control, the nonlinear effect of the OVS to the hexagon (OVSH) on the dynamics is neglected. Thus, the actual system can have bad dynamics or even be unstable. This letter proposes a multifrequency current control with distortion-free OVS and AWU where this problem is solved. An internal-model-control scheme is included to remove the OVSH nonlinear effect from the control loops, yielding better dynamics. Experimental results are provided, Xunta de Galicia | Ref. ED481B 2016/066-0, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Speed estimation based on rotor slot harmonics in multiphase induction machines under open-phase fault

  • Gómez Yepes, Alejandro
  • Doval Gandoy, Jesús
  • Baneira Collazo, Fernando
  • Toliyat, Hamid A
Multiphase (i.e., with more than three phases) induction machines (MIMs) are particularly attractive for safety-critical applications, because they are able to operate under open-phase fault. On the other hand, algorithms for sensorless speed estimation are of great interest, since, e.g., they improve reliability and decrease cost and maintenance. Among these methods, the approach based on rotor slot harmonics (RSHs) is especially popular, due to advantages such as its independence from time-varying parameters (e.g., resistances and inductances). In healthy machines, usually the fundamental or any given harmonic component has ideally equal magnitude in all stator phases. The previous RSH-based techniques rely on this characteristic. Conversely, under open-phase fault there is current imbalance. Moreover, due to the postfault strategies for optimum current reference generation, such imbalance varies with the load. Thus, the existing RSH-based methods are not suitable for open-phase fault, and alternative ones should be developed. This paper addresses the sensorless speed estimation based on RSHs for MIMs under open-phase fault. The main RSHs obtained in faulty situations are studied. Then, accordingly, a speed estimation technique for MIMs under open-phase fault is developed, able to work with good accuracy despite the variable current imbalance. Finite-element and experimental results are provided., Xunta de Galicia | Ref. ED481B 2016/066-0, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Contribución de congreso (ConferenceOutput)

Small signal dynamic model of a self-synchronising current regulated rectifier for a permanent magnet wind energy conversion system (WECS)

  • McGrath, Brendan
  • López Sánchez, Óscar
  • Holmes, Grahame
Permanent magnet synchronous generators (PMSGs) are attractive for wind energy applications since they can both self-excite and operate at high power densities. Recent work has shown how the rectifiers for these systems can self-synchronise to the stator output voltage using a phase-locked-loop (PLL), and thus control the stator current without requiring rotor position sensors/observers and/or field orientation/direct torque control concepts. This paper now presents a small signal model of this strategy that accounts for the dynamic elements of the current regulator, the PLL, converter modulation delays, and the generator electrical dynamics. The model establishes design principles for this control strategy that confirm its stability when the PLL bandwidth is set to one decade below the current regulator bandwidth. The theoretical findings have been validated using a full-switched model of a PMSG based Wind Energy Conversion System (WECS)., Australian Research Council, Ministerio de Economía, Industria y Competitividad | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Carrier-Based PWM equivalent to multilevel multiphase space vector PWM techniques

  • López Sánchez, Óscar
  • Álvarez Ruiz de Ojeda, Luis Jacobo
  • Gómez Yepes, Alejandro
  • Baneira Collazo, Fernando
  • Pérez Estévez, Diego
  • Freijedo Fernández, Francisco Daniel
  • Doval Gandoy, Jesús
The space vector pulsewidth modulation (SVPWM) techniques enhance the performance of multilevel multiphase inverters. With multilevel (three-phase) inverters and with (two-level) multiphase inverters, it is widely accepted that the typical SVPWM strategies have an equivalent carrier-based pulsewidth modulation (CBPWM) counterpart, which produces identical results. However, the conclusions reached in the articles that show these cannot be applied, nor even extended, to SVPWM techniques with more than two levels and three phases. This article shows that the most widely accepted multilevel multiphase SVPWM techniques have a fully equivalent CBPWM counterpart, which consists of a phase disposition pulsewidth modulation with an appropriate zero-sequence injection scheme. Closed-form expressions to calculate the zero sequences are provided. The proposed modulation techniques are simulated and then implemented in a field- programmable gate array, showing that the equivalent CBPWM techniques produce identical results as the original SVPWM ones, but with a significant reduction of hardware requirements. The proposed methodology can be generalized to other multilevel multiphase SVPWM techniques., European Commission, Ministerio de Economía, Industria y Competitividad | Ref. DPI2016-75832-R, Ministerio de Ciencia e Innovación
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Generalized multifrequency current controller for grid-connected converters with LCL filter

  • Pérez Estévez, Diego
  • Doval Gandoy, Jesús
  • Gómez Yepes, Alejandro
  • López Sánchez, Óscar
  • Baneira Collazo, Fernando
This paper presents a grid-side current controller for grid-tied inverters with LCL filter, including harmonic current elimination. The proposed controller only measures the grid current and voltage and it combines excellent dynamic characteristics with good robustness. Contrarily to previously proposed harmonic-current controllers, the presented solution offers a generalized method that gives a consistent (with minimal variation in the reference-tracking dynamics) and stable performance irrespectively of the number of current harmonics to be canceled and of the resonant frequency of the LCL filter (provided that it is lower than the Nyquist frequency). The response to reference commands is completely damped and fast. The response speed is set in accordance with the low-pass characteristic of the LCL filter so as to limit the control effort. Concerning the disturbance rejection, the controller offers an infinite impedance to any disturbances (such as grid voltage harmonics) at a set of arbitrarily specified frequencies. This allows the designer to eliminate all the undesired current harmonics with a simple design process. In addition, the performance of the presented controller is evaluated in terms of a fundamental tradeoff that exists between robustness to variations in the grid impedance and the number of frequency components rejected. Finally, simulation and experimental results that validate the proposal are presented., Ministerio de Ciencia e Innovación, European Commission, Agencia Estatal de Investigación | Ref. DPI2016-75832-R, Ministerio de Educación, Cultura y Deporte | Ref. FPU14/00683
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

DC-current injection with minimum torque ripple in interior permanent-magnet synchronous motors

  • Baneira Collazo, Fernando
  • Doval Gandoy, Jesús
  • Gómez Yepes, Alejandro
  • López Sánchez, Óscar
Several proposals based on dc-current injection have been reported for estimating the stator winding resistance in induction machines, and recently extended for synchronous machines. Tracking this resistance can be very useful, e.g., for thermal monitoring or preserving control dynamics. In surface-mounted permanent-magnet synchronous machines (PMSMs), it is possible to inject a dc component in the d -axis, without perturbing the torque. However, it has been claimed that, for synchronous machines with saliency, it is not possible to avoid the torque ripple due to such injection. This letter proposes optimum reference currents to impose dc current in three-phase interior PMSMs while minimizing to practically zero its associated torque ripple. Namely, the dc signal is injected in combination with a suitable second-order harmonic so that the stator current space vector follows the constant-torque locus, while the fundamental is set according to the maximum-torque-per-ampere strategy. Experimental results validate the theory., Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Enhanced resonant current controller for grid-connected converters with LCL filter

  • Pérez Estévez, Diego
  • Doval Gandoy, Jesús
  • Gómez Yepes, Alejandro
  • López Sánchez, Óscar
  • Baneira Collazo, Fernando
Conventional resonant controllers (RCs) are commonly used in the current control of grid-tied converters with LCL filter due to their advantages, such as zero steady-state error at both fundamental sequences, easy design process, and straightforward implementation. Nevertheless, these traditional solutions do not permit to place the closed-loop poles of the system in convenient locations when dealing with a fourth-order plant model such as the LCL filter plus the computation delay. Therefore, the reference tracking and the disturbance rejection are deficient in terms of transient behavior and depend on the LCL filter. Furthermore, an additional active damping method usually has to be designed in order to ensure stability. This paper presents an enhanced current RC with stable and fast response, negligible overshoot, good disturbance rejection, and low controller effort for grid-tied converters with LCL filter. The developed solution uses a direct discrete-time pole-placement strategy from the classical control theory (using transfer functions), involving two extra filters, to enhance the performance of the RC. In this manner, the complexity of state-space methods from modern control theory is avoided. Simulation and experimental results are provided to verify the effectiveness of the proposed control scheme., Agencia Estatal de Investigación | Ref. DPI2016-75832-R, Ministerio de Economía y Competitividad | Ref. BES-2013-063149
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Improvement in dc-link utilization with reduced current and torque deterioration for five-phase drives by combination of circulating-current filters and simple carrier-based PWM based on closed-form expressions

  • Gómez Yepes, Alejandro
  • Doval Gandoy, Jesús
  • Toliyat, Hamid A.
Multiphase drives offer important advantages over three-phase ones. With pulsewidth modulation (PWM), zero-sequence and x-y signals can be injected to enhance dc-link utilization (DLU). For example, in five-phase drives, for given dc-link voltage, the fundamental is raised by 23.1%. For sinusoidally distributed windings, although x-y currents increase losses, torque is unaffected. However, no simple carrier-based PWM methods based on closed-form expressions have been presented for this purpose so far. Most importantly, x-y currents may be unacceptably large, due to the small x-y impedance. This is particularly troublesome when high fundamental voltage is needed continuously. Applying square waveform instead of PWM raises the fundamental from 23.1 to 27.3%. Given the square-voltage distortion, filters with large x-y impedance were devised for this approach. However, some square-waveform harmonics map into the torque-producing plane without attenuation, generating torque ripple. This article proposes to use a simple carrier-based PWM method in five-phase drives combined with a circulating-current filter. The x-y voltages, which see large filter impedance, are exploited to achieve a high DLU similar to previous solutions, but without torque ripple or excessive x-y currents. Guidelines are given for designing the filter when used with the presented PWM strategy. Experimental results verify the proposal, Agencia Estatal de Investigación | Ref. RYC2018-024407-I, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Capítulo o parte de un libro (BookPart)

El poder normativo y económico unilateral de la UE como complemento a la acción multilateral ambiental e instrumento para la universalización del Pacto Verde Europeo

  • Movilla Pateiro, Laura
La Unión Europea, además de seguir apostando como hasta ahora por el liderazgo a través del ejemplo y el multilateralismo para abordar los pro­blemas ambientales, está recurriendo también de forma consciente y estratégica al poder comercial y normativo que le otorgan su Política Comercial Común y su mercado interior y que le permite establecer estándares ambientales en todas las cadenas de valor mundiales. Algunos de los ejemplos recientes más icónicos de estas medidas unilaterales son el establecimiento de un Mecanismo de Ajuste en Frontera por Carbono o la adopción de un Reglamento para luchar contra la deforestación. Este tipo de medidas tienen dos grandes finalidades:reforzar la implementación del multilateralismo ambiental -del que obtienen su legitimidad-, y, con ello, la universalización de las metas del Pacto Europeo; y garantizar un level playing field para el sector productivo europeo. Estas medidas resultan controvertidas y podrían llegar a ser desafiadas ante el Sistema de Solución de Controversias de la OMC., As well as continuing to lead by example and multilateralism in takling environmental problems, the EU is also consciously and strategical ly using the trade and regulatory power granted by its Common Commercial Policy and its internal market to set environmental standards in al/ global value chains. Some of the most iconic recent examples of these unilateral measures are the establishment of a Border Carbon Adjustment Mechanism or the adoption of a Regulation to combat deforestation. These types of measures have two main purposes: to reinforce the implementation of environmental multilateralism-from which they derive their legitimacy-and, with it, the universalisation of the goals of the European Green Deal; and to guarantee a level playing field far the European productive sector. These measures are controversial and could be challenged before the WTO Dispute Settlement System., Agencia Estatal de Investigación | Ref. PID2022-142484NB-C22, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Control strategy for dual three-phase machines with two open phases providing minimum loss in the full torque operation range

  • Gómez Yepes, Alejandro
  • Doval Gandoy, Jesús
  • Baneira Collazo, Fernando
  • Toliyat, Hamid A
Dual three-phase machines (D3PMs) are particularly attractive due to their fault-tolerance capability. In general, under open-phase (OP) faults, the current references are adapted following a minimum-loss strategy (MLS) or a maximum-torque strategy (MTS). The MLS offers lower copper loss than the MTS for any given torque, but a smaller torque operation range. The full-range MLS (FRMLS) has recently been proposed, providing minimum copper loss, for each torque value, in the whole torque operation range (the MTS torque operation range); however, only one OP was considered. Furthermore, neither the torque operation range of the MLS nor the copper loss of the MLS or MTS have been assessed with two OPs. Consequently, it is difficult to infer a priori the relevance that the FRLMS may have for two OPs. This letter evaluates the extension of the FRMLS to D3PMs with two OPs. First, the procedure to carry out this extension is described. Then, the convenience of the FRMLS for two OPs is studied for different situations. It is concluded that for two OPs in most cases, the FRMLS is substantially better than the MTS and MLS in terms of copper loss and torque operation range. Experimental results verify the theory., Xunta de Galicia | Ref. ED481B 2016/066-0, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Control strategy for multiphase drives with minimum losses in the full torque operation range under single open-phase fault

  • Baneira Collazo, Fernando
  • Doval Gandoy, Jesús
  • Gómez Yepes, Alejandro
  • López Sánchez, Óscar
  • Pérez Estévez, Diego
Fault tolerance is an advantageous characteristic of multiphase machines when compared with three-phase ones. During open-phase fault, the current references need to be adapted to provide ripple-free torque. As a consequence of this modification, the postfault phase currents might be larger than the rated current. Such a situation leads to overheating, and to preserve the integrity of the system, some limits are set to the postfault phase currents. Two main strategies have been proposed for the postfault situation: maximum torque (MT) and minimum losses (ML). The MT strategy allows us to obtain the widest torque operation range (TOR) in the postfault situation but does not minimize the stator winding losses; conversely, the ML strategy provides the minimum stator winding losses for each torque value, at the expense of reducing the TOR. Thus, the solutions proposed so far do not achieve minimum stator winding losses in the entire (that of the MT strategy) TOR. This paper presents the full-range minimum losses (FRML) postfault control strategy, which minimizes the losses in the whole TOR, for multiphase machines with sinusoidally distributed windings under single open-phase fault. The FRML strategy is evaluated for different types of machines, phase numbers, and winding arrangements. Experimental results are provided., Agencia Estatal de Investigación | Ref. DPI2016-75832, Ministerio de Economía y Competitividad | Ref. BES-2013-063149
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Estimation method of stator winding resistance for induction motor drives based on DC-signal injection suitable for low inerti

  • Baneira Collazo, Fernando
  • Asiminoaei, Lucian
  • Doval Gandoy, Jesús
  • Delpino, Hernan Andres Miranda
  • Gómez Yepes, Alejandro
  • Godbersen, Jens
Thermal protection is an important aspect that should be considered in ac machines to prevent reduction of the lifetime. For economic reasons, temperature estimation is preferable than the installation of thermal sensors. Thus, several proposals based on dc-signal injection have been reported. Their main drawback is that a certain torque ripple is produced during the injection. On the other hand, the already published filtering techniques proposed to extract the dc components from the phase voltages and currents are based on transforming the per-phase variables to a synchronous reference frame where the fundamental component is eliminated. For this transformation, the rotor position is needed. It is shown in this paper that, due to the disturbance caused in the position due to the torque ripple, the stator resistance estimation is deteriorated when the inertia is not high enough to make this perturbation negligible. In addition, a new technique is also presented to segregate the dc components from the phase currents and voltages, which is robust in terms of accuracy even when the speed/position is perturbed due to the injection. Experimental results validate the theory, Agencia Estatal de Investigación | Ref. DPI2016-75832-R, Ministerio de Economía y Competitividad | Ref. BES-2013-063149
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Multifrequency current control for

n
  • Gómez Yepes, Alejandro
  • Doval Gandoy, Jesús
  • Toliyat, Hamid A.
Multiphase drives offer important advantages over three-phase ones, e.g., lower per-phase rating and enhanced fault tolerance. For multiphase machines, multifrequency current control (MCC) is often required, e.g., for harmonic cancellation or injection. In certain situations, converter output voltage (OV) saturation occurs, which can cause windup and additional OV distortion. For MCC, obtaining antiwindup and distortion-free OV saturation, with full dc-bus exploitation, entails extra complexity. Recent publications address this problem in three-phase and dual-three-phase (treated as two independent three phases) systems with one and two isolated neutrals, respectively. However, extending such solutions to drives of any phase number n, winding arrangement (symmetrical or asymmetrical), and neutral configuration is not straightforward. This paper proposes a general MCC scheme, including antiwindup and distortion-free OV saturation with full dc-link utilization, for n-phase machines with different winding arrangements (symmetrical or asymmetrical) and neutral configurations. The computational burden required by the proposed antiwindup and saturation strategy is studied; it is concluded that, although it is significant in comparison with the resources needed by the rest of the MCC, the total computational load is acceptable in most of the cases. Experimental results with two multiphase machines are provided, including a comparison with other approaches, Xunta de Galicia | Ref. ED481B 2016/066-0, Agencia Estatal de Investigación | Ref. DPI2016-75832-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Grid-tied inverter with AC voltage sensorless synchronization and soft start

  • Pérez Estévez, Diego
  • Doval Gandoy, Jesús
This paper presents a novel grid synchronization method with bumpless start that requires minimal computational load and can selectively track the positive sequence of the grid voltage in an unbalanced and distorted three-phase weak grid. Only 12 floating-point operations are required to obtain the in-phase and quadrature components that define a synchronous frame which tracks the positive sequence of the grid voltage. Contrary to a phase-locked loop (PLL), the presented scheme does not require to measure any ac voltages. Therefore, this sensorless method is particularly suited for weak-grid conditions, in which the voltage at the point of common coupling may contain significant noise and can experience larger deviations from the grid voltage (compared to a strong grid) due to the voltage drop in the weak grid impedance. The error in the estimated phase depends on the accuracy of the plant model. If the LCL filter parameters are known, then both the proposal and a PLL-based scheme result in the same steady-state error. Experimental results show the advantages of the proposal compared to a moving average filter PLL., Agencia Estatal de Investigación | Ref. DPI2016-75832-R, Ministerio de Educación, Cultura y Deporte | Ref. FPU14/00683