Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Perspective Ways to Provide Kids with Protein-Rich Snacks for Preventing Overweight: From Scientific Studies to Consumers

  • Khvostenko, Kateryna|||0000-0002-0552-6576
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Argüelles Foix, Angel Luís|||0000-0001-5320-7011
  • Hernández Pérez, Manuel|||0000-0003-1986-6501
  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Muñoz-Pina, Sara
[EN] Tackling rising up obesity tendency, especially among kids and adolescents, is a crucial task for modern society. The reduction of fast-acting carbohydrate content and plant protein enrichment in snacks recipe is seen as a perspective strategy to prevent overweight. The existed initiates and scientific projects related to the reduction of obesity among kids are described. This study has presented the data about protein-rich snack development by using alternative raw-materials, legumes as well. The review indicates that identifying consumer orientation and co-creation strategy along new functional products development will contribute to the increased consumption of protein-enriched snacks among the young generation., The work was supported by the AGROALNEXT programme supported by MCIN and Generalitat Valenciana [PRTR-C17.I1]; Universitat Politecnica de Valencia [PAID-10-21].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Long-Term Stability Enhancement in Multi-Cavity Optoelectronic Oscillators via Multicore Fibers

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We report a novel multi-cavity Vernier optoelectronic oscillator (OEO) approach enabled by dispersion-engineered heterogeneous multicore fibers (MCFs) to achieve broadband tunability, ultra-low phase noise, and high temporal stability. By using the Central Limit Theorem, we theoretically demonstrate that the temporal stability of the oscillation frequency improves as the number of cavities increases, with the frequency drift variance scaling inversely with the number of cavities. This key insight transcends Vernier-specific implementations, offering a universal framework for enhancing stability in multi-cavity OEOs of varying topologies. Experimental validation using a custom-fabricated 7-core MCF demonstrates up to a 75% reduction in the frequency drift standard deviation for a 7-cavity OEO compared to a dual-cavity configuration, alongside an average phase noise level of approximately -120 dBc/Hz at a 10-kHz offset. By exploiting the phase-to-intensity modulation conversion to implement a broadband radiofrequency filtering response, we reach wideband optically tunable oscillation frequency from 10 to 18 GHz enabled by the MCF dispersion characteristics. These results position MCF-based multi-cavity Vernier OEOs as a versatile platform for next-generation radar, communications, and sensing systems demanding high spectral purity, long-term operational stability, and fast wideband reconfigurability., This work was supported in part by the Spanish MICIU/AEI under project PID2023-152314OB-100, in part by Generalitat Valenciana under Project PROMETEO/2021/15 , and in part by Universitat Politecnica de Valencia PAID-10-21 fellowship for S. Garcia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rethink reporting of evaluation results in AI

  • Burnell, Ryan
  • Schellaert, Wout Willy M.
  • Burden, John
  • Ullman, Tomer D.
  • Tenenbaum, Joshua B.
  • Rutar, Danaja
  • Cheke, Lucy G.
  • Sohl-Dickstein, Jascha
  • Mitchell, Melanie
  • Kiela, Douwe
  • Shanahan, Murray
  • Voorhees, Ellen M.
  • Cohn, Anthony
  • Leibo, Joel Z.
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] Artificial intelligence (AI) systems have begun to be deployed in high-stakes contexts, including autonomous driving and medical diagnosis. In contexts such as these, the consequences of system failures can be devastating. It is therefore vital that researchers and policymakers have a full understanding of the capabilities and weaknesses of AI systems so that they can make informed decisions about where these systems are safe to use and how they might be improved., We are grateful to J. Pineau and S. Russell for their feedback on the manuscript and to M. Brundage and L. Ahmad for helpful discussions about the need for instance-by-instance results for foundation models. Funding support was provided by the Future of Life Institute under grant RFP2-152 (J.H.O. and J.B.); US Defense Advanced Research Projects Agency HR00112120007 (RECoG-AI) (J.H.O., L.C., R.B., J.B., and D.K.); grant PID2021-122830OB-C42 (SFERA) funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe (J.H.O., F.M.P., and W.S.); INNEST/2021/317 [Project cofunded by the European Union with the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) de la Comunitat Valenciana 2014-2020 ] (J.H.O. and W.S.); and UPV (Vicerrectorado de Investigación) grant PAI-10-21 (J.H.O. and W.S.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Constrained multiple instance learning for ulcerative colitis prediction using histological images

  • del Amor, Rocío
  • Meseguer-Esbrí, Pablo|||0000-0001-7821-6168
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Lorenzo Parigi, Tommaso
  • Villanacci, Vincenzo
  • Launet, Laetitia
  • Bazarova, Alina
  • Tontini, Gian Eugenio
  • Bisschops, Raf
  • De Hertogh, Gert
  • Ferraz, Jose G.
  • Götz, Martin
  • Gui, Xianyong
  • Hayee, Bu Hussain
  • Lazarev, Mark
[EN] Background and Objective: Ulcerative colitis (UC) is an inflammatory bowel disease (IBD) affecting the colon and the rectum characterized by a remitting-relapsing course. To detect mucosal inflammation as-sociated with UC, histology is considered the most stringent criteria. In turn, histologic remission (HR) correlates with improved clinical outcomes and has been recently recognized as a desirable treatment target. The leading biomarker for assessing histologic remission is the presence or absence of neutrophils. Therefore, the finding of this cell in specific colon structures indicates that the patient has UC activity. However, no previous studies based on deep learning have been developed to identify UC based on neu-trophils detection using whole-slide images (WSI). Methods: The methodological core of this work is a novel multiple instance learning (MIL) framework with location constraints able to determine the presence of UC activity using WSI. In particular, we put forward an effective way to introduce constraints about positive instances to effectively explore additional weakly supervised information that is easy to obtain and enjoy a significant boost to the learning process. In addition, we propose a new weighted embedding to enlarge the relevance of the positive instances. Results: Extensive experiments on a multi-center dataset of colon and rectum WSIs, PICASSO-MIL, demon-strate that using the location information we can improve considerably the results at WSI-level. In com-parison with prior MIL settings, our method allows for 10% improvements in bag-level accuracy. Conclusion : Our model, which introduces a new form of constraints, surpass the results achieved from current state-of-the-art methods that focus on the MIL paradigm. Our method can be applied to other histological concerns where the morphological features determining a positive WSI are tiny and similar to others in the image., This work has received funding from Horizon 2020, the European Unions Framework Programme for Research and Innovation, under grant agreement No. 860627 (CLARIFY) , the Spanish Ministry of Economy and Competitiveness through project PID2019-105142RB-C21 (AI4SKIN) and GVA through projects PROMETEO/2019/109 and INNEST/2021/321 (SAMUEL) . Roco del Amor and Adrin Colomer work have also been supported by the Spanish Government under FPU Grant (FPU20/05263) and the Universitat Politcnica de Valncia (PAID-10-21-Subprograma 1), respectively. We gratefully acknowledge the support from the Generalitat Valenciana (GVA) with the donation of the DGX A100 used for this work, action co-financed by the European Union through the Operational Program of the European Regional Development Fund of the Comunitat Valenciana 2014¿2020 (IDIFEDER/2020/030).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In vitro digestion assessment (standard vs. older adult model) on antioxidant properties and mineral bioaccessibility of fermented-dried lentils and quinoa

  • Sánchez-García, Janaina Madelein
  • Muñoz-Pina, Sara
  • Tárrega, Amparo
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] The growing number of older adults necessitates tailored food options that accommodate the specific diseases and nutritional deficiencies linked with ageing. This study aims to investigate the influence of age-related digestive conditions in vitro on the phenolic profile, antioxidant activity, and bioaccessibility of minerals (Ca, Fe, and Mg) in two types of unfermented, fermented, and fermented dried quinoa and lentils. Solid-state fermentation, combined with drying at 70 °C, significantly boosted the total phenolic content in Castellana and Pardina lentils from 5.05 and 6.6 to 10.5 and 7.5 mg gallic acid/g dry weight, respectively, in the bioaccessible fraction following the standard digestion model, compared to the unfermented samples. The phenolic profile post-digestion revealed elevated levels of vanillic and caffeic acids in Castellana lentils, and vanillic acid in Pardina lentils, while caffeic acids in Castellana lentils were not detected in the bioaccessible fraction. The highest antioxidant potency composite index was observed in digested fermented dried Castellana lentils, with white quinoa samples exhibiting potency above 80%. Mineral bioaccessibility was greater in fermented and fermented dried samples compared to unfermented ones. Finally, the digestive changes that occur with ageing did not significantly affect mineral bioaccessibility, but compromised the phenolic profile and antioxidant activity., This research was under the project PID2019-107723RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.1309/501100011033. Also, Sara Muñoz Pina was a beneficiary of a postdoctoral grant from the Universitat Politècnica de Valencia (PAID-10-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Amorphous surface modification and scalability of WO3 nanostructures for photoelectrocatalytic degradation of organic pollutants

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
  • Mais, L.
  • Mascia, M.
[EN] This work explores the use of WO3 nanostructures as an effective solution for the removal of emerging contaminants from water, specifically focusing on the degradation of diethyl phthalate (DEP), a widely recognized environmental pollutant. A key aspect of the study is the scaling of the electrochemically active area and surface modification of WO3 nanostructures, progressing from 0.5 cm2 to 2.5 cm2, followed by a surface reduction treatment that induces amorphization and enhances their photoelectrocatalytic activity after applying a 5-minute reduction treatment. Scaling was further extended to 15 cm2, with the 15 cm2 nanostructures exhibiting the highest DEP degradation rate, achieving a degradation constant of 0.0988 h-1. The study also investigates the effect of key operational parameters such as applied voltage (1 V and 1.5 V), contaminant concentration (10 ppm, 25 ppm and 100 ppm). Reusability was also tested, with optimal conditions identified as 10 ppm DEP, 1 V, and the ability to reuse the nanostructures up to three times. Finally, under these optimal conditions, the degradation of DEP was monitored, leading to the identification of ten intermediate products and the proposal of a degradation pathway, highlighting the potential of WO3 for sustainable and efficient water treatment applications., The authors wish to thank the economic support granted by AEI (PID2019 105844RB-I00/AEI/10.13039/501100011033). M. CifreHerrando acknowledges the Ministerio de Universidades for the predoctoral grant (FPU19/02466). G. Rosello-Marquez is also grateful to UPV for the post-doctoral grant (PAID-10 21) and the grant to support postdoctoral research at UPV (PAID-PD-22). Additionally, funding from the Spanish Research Network E3TECH-PLUS (RED2022 134552-T, MICINN/AEI) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the use of the theory of critical distances with mesh control for fretting fatigue life assessment in complete and nearly complete contacts

  • Infante-García, Diego|||0000-0001-6010-2031
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Zabala, A.
  • Llavori, I.
[EN] In this work, the theory of critical distances using point method and mesh control approach for fretting fatigue life prediction in complete and nearly complete contacts is analysed. The approach is applied to thirty experi-mental tests found in the literature, where almost nine hundred simulations are carried out. The work concludes that the theory of critical distances using mesh control is able to predict the fretting fatigue strength of com-ponents using an optimum mesh size of 1.6 times the critical distance for all contact configurations analysed. Due to the use of an element size of around the critical distance length, the computational cost can be reduced up to 98% in comparison with the traditional theory of critical distances., This research was funded by the FEDER programme and the Spanish Ministry of Science and Innovation, under project PID2020-118480RB-C21/AEI/10.13039/501100011033. The funding of the Generalitat Valenciana, Programme PROMETEO 2021/046 and Universitat Politecnica de Valencia, Programme PAID-10-21 is also acknowledged. The authors also gratefully acknowledge the financial support given the Eusko Jaurlaritza under "Programa de apoyo a la investigacion colaborativa enareas estrategicas" (Project BISUM: Ref. KK-2021/00089) programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-vitro digestion assessment of DIAAR, protein digestibility, and ACE/COX inhibitory activity of solid-state fermented beans

  • Muñoz-Pina, Sara
  • Khvostenko, Kateryna|||0000-0002-0552-6576
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Adequate protein intake is critical during childhood to support growth, development, and immune function. This in vitro study evaluated the effect of solid-state fermentation with Pleurotus ostreatus on protein digestibility, amino acid profile, and bioactivity (ACE and COX inhibition) in two local bean varieties. Fermentation enhanced gastric-phase protein digestibility; however, only Roget beans showed a notable increase after intestinal stage (67% in fermented vs. 57% autoclaved samples, representing a 17.5% relative increase). Additionally, bioaccessible amino acid profile improved significantly in fermented Roget beans, with increases in hydrophobic and aromatic amino acids. Correspondingly, DIAAR values for lysine, valine, and isoleucine rose, while sulfur amino acids decreased, whereas Herradura beans showed limited or negative changes. Fermentation preserved COX-2 inhibition while reducing COX-1 activity. Overall, fermented Roget beans showed enhanced digestion and functional properties, suggesting nutritional benefits for consumers of local legume-based foods, particularly in child-oriented formulations, pending in vivo validation., This study forms part of the AGROALNEXT programme (AGROALNEXT/2022/030) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17-I1) and by Generalitat Valenciana. Also, authors are grateful for a grant called Initiative: reception of Ukrainian research personal in the Valencian R+D+I system from Generalitat Valenciana, Spain and financial support from Post-doctoral Grant (PAID-10-21) and Postdoctoral Research Fostering Grant (PAID-PD-22) from the Vicerrectorado de Investigacion (Universitat Politecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and Comparison of WO3/WO3-MoO3 and TiO2/TiO2-ZnO Nanostructures for Photoelectrocatalytic Degradation of the Pesticide Imazalil

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
  • Navarro Gázquez, Pedro José
[EN] Tungsten oxide (WO3) and zinc oxide (ZnO) are n-type semiconductors with numerous applications in photocatalysis. The objective of this study was to synthesize and characterize different types of nanostructures (WO3, WO3-Mo, TiO2, and TiO2-ZnO) for a comparison of hybrid and pure nanostructures to use them as a photoanodes for photoelectrocatalytic degradation of emerging contaminants. With the aim of comparing the properties of both samples, field emission scanning electron microscopy (FE-SEM) and confocal laser-Raman spectroscopy were used to study the morphology, composition, and crystallinity, respectively. Electrochemical impedances, Mott-Schottky, and water splitting measurements were performed to compare the photoelectrochemical properties of photoanodes. Finally, the photoelectrocatalytic degradation of the pesticide Imazalil was carried out with the best optimized nanostructure (TiO2-ZnO)., This research was funded by AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033) and the project co-funded by FEDER operational program 2014¿2020 of Comunitat Valenciana (IDIFEDER/18/044). M.C.-H. received financial support from Ministerio de Universidades of the predoctoral grant (FPU19/02466). G.R.-M. received financial support from the UPV of a post-doctoral grant (PAID-10-21). P.J.N.-G. received support thanks the grant PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033. Finally, project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Protein digestibility and ACE inhibitory activity of fermented flours in older adults and standard gastrointestinal simulation

  • Sánchez-García, Janaina Madelein
  • Muñoz-Pina, Sara
  • Tárrega, Amparo
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Consumption of essential amino acids responsible for muscle protein synthesis is important in preventing sarcopenia among older individuals. This population may experience gastrointestinal disorders that inhibit protein digestibility, making it crucial to address. Therefore, solid-state fermentation (SSF) using Pleurotus ostreatus and air drying has been suggested as a means of improving the protein digestibility of lentils and quinoa. SSF combined with air drying at 70 °C resulted in a slight increase in protein hydrolysis compared to unfermented samples. SSF was found to boost the proportion of small peptides to 35 %. Following digestion, SSF and drying yielded bioactive peptides of 1400 and 450 Da, with a range of 11 % to 28 %, respectively, and peptides < 190 Da making up 60 % of the total. SSF promoted valine, leucine, and isoleucine generation; however, hot air drying reduced free amino acids due to the amino acid-reducing sugar bonding but was never lower than the initial content of its unfermented counterpart. Furthermore, SSF and drying at 70 °C improved the release of hydrophobic amino acids (>70 mg/g dry basis) and negatively charged amino acids (>20 mg/g dry basis) in lentils during digestion. The SSF samples exhibited lower angiotensin converting enzyme (ACE) inhibitory activity, ¿35 %, compared to unfermented flours after digestion. However, the ACE inhibitory activity increased in SSF-dried samples, in part because of melanoidins generated during drying. Finally, lower values of protein digestibility and thus smaller peptides, amino acid profile, and ACE inhibitory activity of fermented flours were found in the older adult digestion model., This research was under the project PID2019-107723RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.1309/501100011033. Sara Munoz Pina was a beneficiary of a postdoctoral grant from the Universitat Polit`ecnica de Valencia (PAID-10-21) and Janaina Sanchez-García of a master s degree scholarship funded by the Ecuadorian Government through the SENESCYT (contract CZ05-000716-2018).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of Methylparaben Using Optimal WO3 Nanostructures: Influence of the Annealing Conditions and Complexing Agent

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] In this work, WO3 nanostructures were synthesized with different complexing agents (0.05 M H2O2 and 0.1 M citric acid) and annealing conditions (400 degrees C, 500 degrees C and 600 degrees C) to obtain optimal WO3 nanostructures to use them as a photoanode in the photoelectrochemical (PEC) degradation of an endocrine disruptor chemical. These nanostructures were studied morphologically by a field emission scanning electron microscope. X-ray photoelectron spectroscopy was performed to provide information of the electronic states of the nanostructures. The crystallinity of the samples was observed by a confocal Raman laser microscope and X-ray diffraction. Furthermore, photoelectrochemical measurements (photostability, photoelectrochemical impedance spectroscopy, Mott-Schottky and water-splitting test) were also performed using a solar simulator with AM 1.5 conditions at 100 mW center dot cm(-2). Once the optimal nanostructure was obtained (citric acid 0.01 M at an annealing temperature of 600 degrees C), the PEC degradation of methylparaben (C-O 10 ppm) was carried out. It was followed by ultra-high-performance liquid chromatography and mass spectrometry, which allowed to obtain the concentration of the contaminant during degradation and the identification of degradation intermediates. The optimized nanostructure was proved to be an efficient photocatalyst since the degradation of methylparaben was performed in less than 4 h and the kinetic coefficient of degradation was 0.02 min(-1)., Authors would like to express their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019-105844RB-I00/AEI/10.13039/501100011033) in the acquisition of Laser Raman Microscope (UPOV08-3E-012). M. Cifre-Herrando thanks Ministerio de Universidades for the concession of the predoctoral grant (FPU19/02466) and Gemma Rosello-Marquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21). Finally, authors wish to thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) for the financial funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deep Learning for Skin Melanocytic Tumors in Whole-Slide Images: A Systematic Review

  • Mosquera-Zamudio, Andrés
  • Launet, Laetitia
  • Tabatabaei, Zahra
  • Parra-Medina, Rafael
  • Oliver Moll, Javier
  • Monteagudo, Carlos
  • Janssen, Emiel
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Simple Summary Deep learning (DL) is expanding into the surgical pathology field and shows promising outcomes in diminishing subjective interpretations, especially in dermatopathology. We aim to show the efforts of implementing DL models for melanocytic tumors in whole slide images. Four electronic databases were systematically searched, and 28 studies were identified. Our analysis revealed four research trends: DL models vs. pathologists, diagnostic prediction, prognosis, and regions of interest. We also highlight relevant issues that must be considered to implement these models in real scenarios taking into account pathologists' and engineers' perspectives. The rise of Artificial Intelligence (AI) has shown promising performance as a support tool in clinical pathology workflows. In addition to the well-known interobserver variability between dermatopathologists, melanomas present a significant challenge in their histological interpretation. This study aims to analyze all previously published studies on whole-slide images of melanocytic tumors that rely on deep learning techniques for automatic image analysis. Embase, Pubmed, Web of Science, and Virtual Health Library were used to search for relevant studies for the systematic review, in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist. Articles from 2015 to July 2022 were included, with an emphasis placed on the used artificial intelligence methods. Twenty-eight studies that fulfilled the inclusion criteria were grouped into four groups based on their clinical objectives, including pathologists versus deep learning models (n = 10), diagnostic prediction (n = 7); prognosis (n = 5), and histological features (n = 6). These were then analyzed to draw conclusions on the general parameters and conditions of AI in pathology, as well as the necessary factors for better performance in real scenarios., This work has received funding from the European Union's Horizon 2020 Programme for Research and Innovation, under the Marie Sklodowska Curie grant agreement No. 860627 (CLARIFY). The work is also supported by project INNEST/2021/321 (SAMUEL), PAID-10-21 - Subprograma 1 and PAID-PD-22 for postdoctoral research, and PI20/00094, Instituto de Salud Carlos III, y Fondos Europeos FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Activity-Cloud Organization of Shine-Dalgarno Sequences to Guide Translation Engineering in Escherichia coli

  • Zach, Pavel
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
[EN] Modifying the six-nucleotide Shine-Dalgarno (SD) core motif inside the ribosome binding site (RBS) constitutes a straightforward approach for tuning bacterial translation. However, existing methods for adjusting the effective translation rate (ETR) lack predictability. Even single-nucleotide substitutions can induce substantial alterations in translation efficiency. Moreover, this unpredictability is exacerbated by variations in the leader sequence, spacer region, or coding context. By focusing on the SD core as a key, experimentally tunable determinant of translation initiation in Escherichia coli, we introduce a coarse-grained framework that organizes SD core variants into activity clouds with consistent expression levels. This representation converts a dense sequence-to-phenotype map into an interpretable design space for coarse-grained tuning of expression. In contrast to thermodynamic tools such as the RBS Calculator, which estimate initiation from biophysical parameters, our approach is data-driven and emphasizes (i) interpretable rules over nucleotide positions, (ii) a bidirectional workflow (core -> expected ETR range; target ETR -> candidate cores), and (iii) simple paths between clouds that suggest minimal sequence edits. Designed with the needs of research teams in mind, our workflow prioritizes fixing the SD core first (i.e., selecting an appropriate activity cloud) to substantially narrow the spread of observed ETRs across constructs. This dampens variability introduced by flanking DNA/RNA context (leader, spacer, local secondary structure), so that subsequent fine-tuning is simpler, cheaper, and more predictable. We validate cloud stability and predictive utility using an independent high-throughput data set. Our approach provides a solid foundation for fast, interpretable coarse control of expression, while fine-grained tuning can then be achieved through flanking-region edits that account for spacing and local structure. Finally, we provide an open web interface and repository, allowing researchers to explore the hierarchy, inspect positional influences, and export candidate cores. Together, these contributions advance the Bonde et al. data set from a static lookup into a portable, actionable map for SD core guided tuning of translation in E. coli, and outline a path to extend the idea to a fully functional framework, with possible applications also to other bacteria., This research was funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 grant PID2023-151077OB-I00. Y Boada thanks to Vicerrectorado de Investigacion at Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigacion PAID-06-24), and Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion of Ecuador (Scholarship Convocatoria Abierta 2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Forecasting electricity demand of municipalities through artificial neural networks and metered supply point classification

  • Sergio Mateo-Barcos
  • Ribó-Pérez, David Gabriel|||0000-0003-1089-5197
  • Rodríguez-García, Javier|||0000-0002-9637-9208
  • Alcázar-Ortega, Manuel|||0000-0001-5384-3931
[EN] This study develops a methodology to characterise and forecast large consumers¿ electricity demand, particularly municipalities, with hundreds of different metered supply points based on the previous characterisation of facilities¿ consumption. Demand forecasting allows consumers to improve their participation in electricity markets and manage their electricity consumption. The method considers a classification by different types of metered supply points combined with artificial neural networks to obtain hourly forecasts using well-known parameters such as day types, hourly temperature, the last hour of electricity consumption, and sunrise and sunset time. We apply the methodology to the municipality of Valencia using over five hundred hourly load profiles for a year during 2017 and 2018. Our results present aggregated forecasts with a maximum Mean Absolute Percentage Error of 3.8% per day, outperforming the same forecast without classifying Metered Supply Points. We conclude that a correct electricity demand forecast for a consumer with different types of consumption does not need submetering, but characterising Metered Supply Points is an option with lower costs that allows for better predictions., This work was supported in part by the Universitat Politècnica de València, Spain under grant PAID-10-21, and by the Cátedra deTransición Energética Urbana (Las Naves-FVCiE-UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Electropolymerization of PPy, PEDOT, and PANi on WO3 nanostructures to act as anodes in Li-ion batteries [Dataset]

  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
Dataset from Electropolymerization of PPy, PEDOT, and PANi on WO3 nanostructures for high-performance anodes in Li-ion batteries
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrating mathematical modeling into synthetic biology education: a comprehensive approach through webinars and syllabus development

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Beluzán-Flores, Francisco Javier
[EN] Mathematical modeling is a fundamental aspect of synthetic biology, enabling precise design and analysis of biological systems. To enhance students' understanding of this critical topic, we developed a series of webinars aimed at teaching mathematical modeling to iGEM teams. These webinars were initially created to maintain student engagement during a period of restricted lab access but quickly demonstrated their value as an effective educational tool. The success of these webinars highlighted the suitability of mathematical modeling as a topic well-suited to both onsite and online learning environments. Recognizing this, we expanded the content into a comprehensive syllabus for undergraduate courses in synthetic biology at the Universitat Polit & egrave;cnica de Valencia in Spain and Universidad de las Fuerzas Armadas-ESPE in Ecuador. The course now serves as a core component of synthetic biology education, offering students a robust framework for understanding and applying mathematical models. It includes a series of lectures, practical exercises, and case studies, all designed to deepen students' knowledge and skills in this essential area. To support educators and students, we have also developed a deck of slides and example scripts that provide practical examples and reinforce the concepts taught in the course. This manuscript presents the development, implementation, and impact of these educational initiatives, demonstrating how mathematical modeling can be effectively integrated into synthetic biology curricula to prepare students for real-world challenges in the field., The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This research was funded by MCIN/AEI/10.13039/501100011033 grant numbers PID2020-117271RB-C21 and PID2023-151077OB-I00. YB gives thanks to Universitat Politecnica de Valencia (Grant PAID-10-21 Acceso al Sistema Espanol de Ciencia e Innovacion), and Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion-Ecuador (Scholarship Convocatoria Abierta 2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Volatile profile of quinoa and lentil flour under fungal fermentation and drying

  • Sánchez-García, Janaina Madelein
  • Muñoz-Pina, Sara
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Solid-state fermentation reportedly improves the nutritional and sensory properties of legumes and pseudocer-eals. This study examined changes in the volatile profile using HS-SPME-GC-MS of two varieties of lentil and quinoa flour fermented with Pleurotus ostreatus and dried using hot-air drying and lyophilisation. Fermentation significantly increased the volatile profile. Pardina lentil flour showed a 570% increase in its volatile profile, and 10 compounds were created. In white quinoa, the total area rose from 96 to 4500, and 30 compounds were created. Compounds such as 1-octen-3-ol, benzaldehyde, 3-octanone and hexanal were generated during fermentation, providing a sweet, grassy, cocoa flavour. Hot-air drying led to decrease of over 40% in total peak area. Dried fermented flour retained higher levels of compounds that provide a sweet, cocoa aroma. Air-drying temperature had no significant influence on the volatile profile. This a allows the inclusion of these flours in a wide variety of food products., This research was conducted under project PID2019-107723RB-C22, funded by the Ministry of Science and Innovation MCIN/AEI/10.1309/501100011033. Sara Munoz Pina was also a beneficiary of a post-doctoral grant from the Universitat Politecnica de Valencia (PAID-10-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural, vibrational, and electronic behavior of two GaGeTe polytypes under compression

  • Bandiello, Enrico|||0000-0003-0956-3195
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Liang, A.
  • Lora da Silva, E.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Diaz-Anichtchenko, D.
  • Popescu, C.
  • Alabarse, F.G.
  • Rudamas, C.
  • Drasar, C.
  • Segura, A.
[EN] GaGeTe is a layered topological semimetal that has been recently found to exist in at least two different polytypes, a-GaGeTe (R3m) and b-GaGeTe (P63mc). Here we report a joint experimental and theoretical study of the structural, vibrational, and electronic properties of these two polytypes in high-pressure conditions. Both polytypes show anisotropic compressibility and two phase transitions, above 7 and 15 GPa, respectively, as confirmed by XRD and Raman spectroscopy measurements. Although the nature of the high-pressure phases could not be confirmed, comparison with other chalcogenides and total -energy calculations allow us to propose possible high-pressure phases for both polytypes with an in-crease in coordination for Ga and Ge atoms from 4 to 6. In particular, the simplification of the X-ray pattern for both polytypes above 15 GPa suggests a transition to a structure of relatively higher symmetry than the original one. This result is consistent with the rocksalt-like high-pressure phases observed in parent III-VI semiconductors, such as GaTe, GaSe, and InSe. Pressure-induced amorphization is observed upon pressure release. The electronic band structures of a-GaGeTe and b-GaGeTe and their pressure dependence also show similarities to III-VI semiconductors, thus suggesting that the germanene-like sublayer induces a semimetallic character in both GaGeTe polytypes. Above 3 GPa, both polytypes lose their topological features, due to the opening of the direct band gap, while the reduction of the interlayer space increases the thermal conductivity at high pressure. & COPY; 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., This publication is part of the project MALTA Consolider Team Network (RED2022-134388-T) , financed by MINECO/AEI/10.13039/501100003329; by I+D+i projects PID2019-106383GB-41/42/43, FIS2017-83295-P and PID2021-125927NB-C2 financed by MCIN/AEI/10.13039/501100011033; and by project PROMETEO CIPROM/2021/075 (GREENMAT) , financed by Generalitat Valenciana. This study forms part of the Advanced Materials program and is supported by MCIN with funding from European UnionNextGeneration EU (PRTR-C17.I1) and by Generalitat Valenciana through projects MFA/2022/007 and MFA/2022/025 (ARCANGEL) . J.A.S. acknowledges the Ramon y Cajal fellowship (RYC-2015-17482) for financial support. E.B. acknowledges the Universitat Politecnica de Valencia for his postdoctoral contract (program PAID-10-21) . We thank V. Monteseguro (Universidad de Cantabria) and Dr. H. Osman (Universidad de Valencia) for the fruitful discussions on the subject. Authors thank the ALBA Synchrotron for the XRD experiments performed at the MSPD beamline with the collaboration of ALBA staff (proposals No. 2015021222 and 2020074395) as well as the Elettra Sincrotrone Trieste for XRD experiments performed at the XPRESS beamline (proposal 20215005, in-house experiment) . Finally, the authors acknowledge the computing time provided by MALTA Cluster and Red Espanola de Supercomputacion (RES) . E.Ld.S. acknowledges the High Performance Computing Chair-a R & amp;D infrastructure (based at the University of ?Evora; PI: M. Avillez) ,endorsed by Hewlett Packard Enterprise, and involving a con-sortium of higher education institutions, research centers, enter-prises, and public/private organizations; and the Portuguese Foundation of Science and Technology for the financial support with the CEEC individual fellowship 5th edition, Reference 2022.00082.CEECIND.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling and Optimization of a Molecular Biocontroller for the Regulation of Complex Metabolic Pathways

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Santos-Navarro, Fernando Nóbel
[EN] Achieving optimal production in microbial cell factories, robustness against changing intracellular and environmental perturbations requires the dynamic feedback regulation of the pathway of interest. Here, we consider a merging metabolic pathway motif, which appears in a wide range of metabolic engineering applications, including the production of phenylpropanoids among others. We present an approach to use a realistic model that accounts for in vivo implementation and then propose a methodology based on multiobjective optimization for the optimal tuning of the gene circuit parts composing the biomolecular controller and biosensor devices for a dynamic regulation strategy. We show how this approach can deal with the trade-offs between the performance of the regulated pathway, robustness to perturbations, and stability of the feedback loop. Using realistic models, our results suggest that the strategies for fine-tuning the trade-offs among performance, robustness, and stability in dynamic pathway regulation are complex. It is not always possible to infer them by simple inspection. This renders the use of the multiobjective optimization methodology valuable and necessary., This research was funded by MCIN/AEI/10.13039/501100011033 grant number PID 2020-117271RB-C21. YB thanks to Universitat Politècnica de València (Grant PAID-10-21 Acceso al Sistema Español de Ciencia e Innovación), and Secretaría de Educación Superior, Ciencia, Tecnología e Innovación-Ecuador (Scholarship Convocatoria Abierta 2011). FS-N is grateful to grant PAID-01-2017 from Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Comprehensive Review of Torque and Speed Control Strategies for Switched Reluctance Motor Drives

  • Sreeram, K.
  • Preetha, P. K.
  • Rodríguez-García, Javier|||0000-0002-9637-9208
  • Álvarez, Carlos|||0000-0002-8238-1606
[EN] Switched Reluctance Motors (SRMs), outfitted with rugged construction, good speed range, high torque density, and rare earth-free nature that outweigh induction motors (IM) and permanent magnet synchronous motor (PMSM), afford a broad range of applications in the domain of electric vehicles (EVs). Standard copper magnetic wire and low-carbon steel laminations are used to construct SRMs, which give them high efficiency in the range of 85-95%. Despite SRM's desirable features over traditional motor-speed drives, high torque ripples and radial distortions constrain their deployment in EVs. Precise rotor position is imperative for effective management of the speed and torque of SRMs. This paper provides an illustrative compendium on review of the torque-speed control and ripple mitigation techniques using design enhancements and control methods for SRM drives for EV applications. The various schemes were evaluated on their performance metrics-operational speed range, control complexity, practical realization, need for pre-stored parameters (lookup tables of current, inductance and torque profiles) and motor controller memory requirements. The findings provide valuable insights into balancing the gains and tradeoffs associated with EV applications. Furthermore, they pinpoint opportunities for enhancement by analyzing the cost and technical aspects of different SRM controllers., This work was supported in part by the Universitat Politecnica de Valencia under grant PAID-10-21. This study was also supported through AMRITA Seed Grant (Proposal ID: ASG2022188)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Implications of Pleurotus ostreatus solid-state bioprocessing on the nutritional composition, protein structure, and anti-hypertensive and anti-inflammatory potential of local beans (Phaseolus vulgaris L.)

  • Muñoz-Pina, Sara
  • Khvostenko, Kateryna|||0000-0002-0552-6576
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Improving snacks formulation to make them more nutritionally balanced can support healthy growth and development in children. Specifically, this approach can be beneficial for preventing obesity and promoting overall metabolic health. Therefore, the effect of Pleurotus ostreatus solid-state fermentation on the nutritional quality, amino acid profile, and functionality of two traditional Valencian bean varieties were analyzed as potential ingredients for food formulation. Pleurotus ostreatus solid-state fermentation increased protein content by 23 % in Roget beans and 13 % in Herradura beans compared to the untreated beans, while simultaneously enhancing both essential and non-essential amino acid levels and reducing total carbohydrate content and antinutrient concentrations. Additionally, fermentation altered the amino acid profile, leading to an increase in amino acids such as valine, leucine, isoleucine, and tyrosine, compared to all other treatments. These amino acids play a crucial role in childhood health and development. Furthermore, fermented beans showed a 20 % angiotensin-converting enzyme inhibition, and Roget beans enhanced the inhibitory capacity of both cyclooxygenase-1 and cyclooxygenase-2 enzymes up to 90 %. Thus, fermented beans with Pleurotus ostreatus, specifically Roget beans, were identified as a novel ingredient for creating high-protein snacks specifically designed for children and teenagers., This study forms part of the AGROALNEXT programme (AGROALNEXT/2022/030) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17 center dot I1) and by Generalitat Valenciana. Also, authors are grateful for a grant called "Initiative: reception of Ukrainian research personal in the Valencian R + D + I system" from Generalitat Valenciana, Spain and financial support from Post-doctoral Grant (PAID-10-21) and Postdoctoral Research Fostering Grant (PAID-PD-22) from the Vicerrectorado de Investigacion (Universitat Politecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the Complexing Agent on the Synthesis of WO3 Nanostructures for Energy Storage Applications

  • Roselló-Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, energy problems have become one of our society¿s biggest challenges and have drawn worldwide attention. Rechargeable lithium-ion batteries (LIBs) are a good option to solve these problems thanks to their high energy density and good cycle stability. However, much effort has recently been devoted to find alternative anode materials and replace graphite in LIBs, like tungsten oxide (WO3) which has attracted much interest as an anode due to its excellent properties. In this work, a simple method is used to synthesize crystalline WO3 nanostructures, with well-defined morphology using an electrochemical procedure known as electrochemical anodization. This method presents several advantages such as being a simple procedure and easy to control its parameters. During the anodization, two different complexing agents (oxygen peroxide and citric acid) were used. The effect of each complexing agent on the anode behaviour of nanostructures in lithium-ion batteries has been evaluated. On the one hand, Field Emission Scanning Electron Microscopy (FE-SEM) has been used to study the morphology of the samples, Raman Spectroscopy technique has been employed to verify the composition and crystallinity of the nanostructures and Electrochemical Impedance Spectroscopy (EIS) was performed to study their electrochemical properties. Finally, the different samples were applied as an anode for energy storage in Li-ion batteries and their specific capacity was evaluated by Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and Charge-Discharge curves. The nanostructures that presented better electrochemical properties and superior behaviour as anode in lithium-ion batteries were those synthesized with H2O2 as a complexing agent. This sample presents lower resistance to charge transfer and better behaviour during the cycling process, their specific capacity values during discharge and charge 318 mAh·g-1 and 310 mAh·g-1, respectively., Authors would like to express their gratitude to AEI (PID2019-105844RB-I00/ AEI/10.13039/501100011033) for the financial support. M. Cifre-Herrando thank Ministerio de Universidades for the concession of the pre-doctoral grant (FPU19/02466). G. Roselló-Márquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21) and for the grant to promote postdoctoral research at the UPV (PAID.-PD-22). Finally, project cofunded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Solvent on the Photoelectrochemical Performance of WO3 Nanostructures for Hydrogen Evolution

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] Hydrogen has emerged as a pivotal energy carrier for a sustainable future, and photoelectrocatalytic (PEC) water splitting presents a promising method for its production using semiconductor materials. Tungsten trioxide (WO¿) is a potential photoanode for PEC water splitting, but its performance is often hindered by poor charge separation, material stability, and low efficiency. This study investigates the effect of solvent additives during the synthesis of WO¿ nanostructures via anodization, focusing on isopropanol and formamide. The impact of these solvents on the morphology and photoelectrochemical properties of the resulting WO¿ films was analyzed. Results indicate that water is the optimal solvent for synthesizing WO¿ nanostructures, yielding the highest photocurrent density (0.629 mA/cm²) and theoretical hydrogen production of 2.87 L H¿/h·m², significantly outperforming samples synthesized with isopropanol and formamide. The introduction of isopropanol and formamide significantly reduced the performance due to morphological and structural changes that hinder charge transport. Although hydrogen evolution was not directly measured, the enhanced photocurrent suggests improved potential for solar water splitting applications. These findings provide insights into optimizing WO¿based photoanodes for enhanced hydrogen production, contributing to sustainable energy solutions., Authors would like to express their gratitude to AEI (PID2019-105844RB-I00/ AEI/10.13039/501100011033) for the financial support. M. Cifre-Herrando thank Ministerio de Universidades for the concession of the pre-doctoral grant (FPU19/02466). G. Roselló-Márquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21) and the grant for the promotion of postdoctoral research at UPV (PAID-PD-22). Finally, project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Fava Bean (Vicia faba) Processing on Quality Characteristics and Digestibility of a Protein-Rich Snack

  • Khvostenko, Kateryna|||0000-0002-0552-6576
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
  • Muñoz-Pina, Sara
[EN] The impact of fava bean processing methods (soaking, autoclaving, fermentation) on a legume-based bars' quality, protein characteristics, and digestibility was shown. The antioxidant and the angiotensin-converting enzyme-inhibitory capacity before and after in vitro digestion were investigated to reveal the potential advantages of fava bean usage for snacks. All bars have demonstrated high protein content, varying from 22.1 to 25.1 g/100 g DB. Based on the fermented fava beans of Pleurotus ostreatus, the samples were characterized by a higher concentration of essential amino acids by 8.6% and a reduction of tannins by 18.5% compared with bars based on soaked fava beans. Sensory evaluation improved the color, texture, and overall acceptability of the bars with fermented legumes. Various types of bean processing did not significantly affect the protein digestibility of the bars. The fermentation method positively affected the angiotensin-converting enzyme-inhibitory properties of bars and increased by 16.5% (before digestion) and 15% (after digestion) compared with other samples. After digestion, samples were characterized by a high level of Fe bioaccessibility (100, 83, and 79% for the bars based on soaked, autoclaved, and fermented fava beans, respectively) and increased total phenolic content. These findings highlight the potential health benefits of fava bean usage for snack products., This research formed part of the AGROALNEXT program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Kateryna Khvostenko was a beneficiary of a grant called "Initiative: reception of Ukrainian research personal in the Valencian R + D + I system" from Generalitat Valenciana. Sara Munoz-Pina was a beneficiary of a Post-doctoral Grant (PAID-10-21) and Postdoctoral Research Fostering Grant (PAID-PD-22) from the Vicerrectorado de Investigacion (Universitat Politecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In vitro digestibility and angiotensin converting enzyme (ACE) inhibitory activity of solid-state fermented fava beans (Vicia faba L.)

  • Muñoz-Pina, Sara
  • Khvostenko, Kateryna|||0000-0002-0552-6576
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Reducing the content of quickly absorbed carbohydrates and saturated fats in snack formulations while increasing the consumption of high-quality proteins are effective strategies to prevent obesity in childhood. Thus, the nutritional value, digestibility, and functionality of fava beans (Vicia faba L.) fermented with Pleurotus ostreatus were examined as potential ingredients for food design. Solid-state fermentation enhanced the protein content by 16% with a rise in essential (25%) and non-essential (15%) amino acids while decreasing total carbohydrate content and tannin levels. Moreover, fermentation modified the amino acid profile released during digestion, increasing amino acids such as valine, isoleucine, and threonine, which are vital for health and development in childhood. Furthermore, the bioaccessible fraction of the fermented bean showed a 60% of ACE inhibition and improved magnesium bioaccessibility. Consequently, fava beans fermented with Pleurotus ostreatus emerged as a new ingredient in the development of new protein-rich snacks tailored for children and adolescents., This study forms part of the AGROALNEXT programme (AGROALNEXT/2022/030) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Also, authors are grateful for a grant called Initiative: reception of Ukrainian research personal in the Valencian R+D+I system from Generalitat Valenciana, Spain and financial support from Post-doctoral Grant (PAID-10-21) and Postdoctoral Research Fostering Grant (PAID-PD-22) from the Vicerrectorado de Investigacion (Universitat Polit`ecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Is photoelectrocatalysis an efficient process to degrade endocrine disruptors chemicals?

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] Endocrine disruptors chemicals (EDCs) pose significant health risks, including cancer, behavioral disorders, and infertility. In this study, we employed the photoelectrocatalysis (PEC) technique with optimized tungsten oxide (WO3) nanostructures as a photoanode to degrade three diverse EDCs: methiocarb, dimethyl phthalate, and 4- tert-butylphenol. PEC degradation tests were carried out for individual contaminants and a mixture of them, assessing efficiency across different EDC families. Ultra High-Performance Liquid Chromatography and Mass Spectrometry was used to control the course of the experiments. For individual solutions, 4-tert-butylphenol and methiocarb were 100% degraded at 1 hour of PEC degradation. Among the tested EDCs, dimethyl phthalate showed the highest resistance to degradation when treated individually. However, when assessed in a mixture with the other EDCs, the degradation efficiency of dimethyl phthalate increased compared to its individual treatment. Furthermore, four degradation intermediates were identified for each contaminant. Finally, toxicity tests revealed that the initial solution was more toxic than the samples treated for all the contaminants tested, except for the phthalate., Authors would like to express their gratitude for the financial support to the Ministerio de Ciencia e Innovacion ¿ (Project code: PID2019- 105844RB-I00/AEI/10.13039/501100011033). M. Cifre-Herrando thanks Ministerio de Universidades for the concession of the predoctoral grant (FPU19/02466) and Gemma Rosello-Marquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10 21) and for the grant to promote postdoctoral research at the UPV (PAID-PD-22). Finally, authors wish to thank to project co-funded by FEDER operational programme 2014 2020 of Comunitat Valenciana (IDIFEDER/18/044) for the financial funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Air-Drying Temperature on Antioxidant Properties and ACE-Inhibiting Activity of Fungal Fermented Lentil Flour

  • Sánchez-García, Janaina Madelein
  • Muñoz-Pina, Sara
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Solid-state fermentation (SSF) with Pleurotus ostreatus enhances the nutritional value of legumes. However, drying can cause significant changes in physical and nutritional properties of the final products. Thus, this work studies the impact of air-drying temperature (50, 60, and 70 C) on relevant properties (antioxidant properties, ACE-inhibitory capacity, phytic acid, colour, and particle size) of two fermented lentils flour (Pardina and Castellana) using freeze-drying as a reference method. Castellana variety is a better substrate for Pleurotus, generating four times more biomass. In addition, an almost total reduction of phytic acid from 7.3 to 0.9 mg/g db is achieved in this variety. Air-drying significantly decreased the particle size and the final colour with DE > 20; nonetheless, the temperature does not play a crucial role. SSF decreased the total phenolic content and the antioxidant capacity regardless of the variety, however, drying at 70 C increased total phenolic content (186%) in fermented Castellana flour. Comparing drying methods, freeze-drying implied a higher decrease in those parameters, reducing the TPC from 2.4 to 1.6 and from 7.7 to 3.4 mg gallic acid/g db in Pardina and Castellana dried flours. Finally, the flours inhibit the angiotensin I-converting-enzyme, and fermentation and drying increased their potential cardiovascular benefits., This research was under the project PID2019-107723RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.1309/501100011033, Spain. Sara Munoz Pina was a beneficiary of a post-doctoral grant from the Universitat Politecnica de Valencia (PAID-10-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fermented quinoa flour: Implications of fungal solid-state bioprocessing and drying on nutritional and antioxidant properties

  • Sánchez-García, Janaina Madelein
  • Muñoz-Pina, Sara
  • García Hernández, Jorge|||0000-0003-1258-6128
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Andrés Grau, Ana María|||0000-0002-6132-3167
[EN] Quinoa (Chenopodium quinoa Willd) is a pseudocereal rich in protein and excellent source of vitamins, antioxidants, and minerals. Developing new quinoa-based products would be a strategy to extend its consumption. The aim of this study is to evaluate the impact of solid-state fermentation with Pleurotus ostreatus and drying (hot-air at 50, 60 and 70 degrees C and lyophilization) on the nutritional and functional properties of fermented white and black quinoa flours. Changes in proximal composition revealed that white variety was more suitable for solid-state fermentation (SSF), according to the higher biomass production, higher increase of protein (2.11%) and insoluble fiber (7.82%) content. SSF was highly effective in phytic acid reduction (90%) regardless the variety. However, after fermentation, quinoa seeds presented reduced total phenolic content (TPC) and antioxidant capacity, especially on black variety. Nonetheless, hot-air drying improved the antioxidant properties (increased TPC and antioxidant capacity) and promoted changes in the phenolic profile. These changes were characterized by a release of gallic acid together with a notable reduction of vanillic, caffeic and ferulic acids, quercetin-3-glucoside and/or quercetin. A notable increase of the angiotensin converting enzyme-I inhibitory activity was found on the fermented flours mainly due to SSF., This research was under the project PID2019-107723RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.1309/501100011033. Also, Sara Munoz Pina was a beneficiary of a post-doctoral grant from the Universitat Politecnica de Valencia (PAID-10-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental demonstration of dispersion-diversity multicore fiber optical beamforming

  • Ureña-Gisbert, Mario
  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] Phased array antenna (PAA) beam-steering in high radiofrequency bands will be key for upcoming 5G & Beyond wireless communications systems. As a compact and efficient solution to provide tunable beam steering simultaneously to parallel antenna distribution and connectivity, we experimentally demonstrate, for the first time to our knowledge, tunable optical beamforming implemented on a dispersion-diversity multicore optical fiber. The uniqueness of this fiber lies in the fact that each one of its seven step-index trench-assisted cores has been tailored to provide the required chromatic dispersion to enable tunable optical true-time delay line operation. Continuous 1D beam-steering was demonstrated by measuring the radiating pattern of an in-house fabricated 8-element PAA in an anechoic chamber at the radiofrequency of 26 GHz, sweeping the beam-pointing angle from -43 degrees up to 40 degrees by varying the operating optical wavelength from 1542.50 up to 1548.28 nm. Next-generation fiber-wireless communications systems will benefit from the demonstrated dispersion-diversity MCF optical beamforming in terms of flexibility, versatility, capacity, and connectivity along with reduced size, weight, and power consumption., Ministerio de Ciencia e Innovacion (PID2020-118310RB-100); Universitat Politecnica de Valencia (PAID10-21); Generalitat Valenciana (IDIFEDER/2020/032); European Research Council (724663).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthetic biology design principles enable efficient bioproduction of Heparosan with low molecular weight and low polydispersion index for the biomedical industry

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Flores, Marcelo
  • Stiebritz, Martin
  • Córdova, Marco
  • Flores, Francisco
[EN] Heparosan is a natural polymer with unique chemical and biological properties, that holds great promise for biomedical applications. The molecular weight (Mw) and polydispersion index (PDI) are critical factors influencing the performance of heparosan-based materials. Achieving precise control over the synthesis process to consistently produce heparosan with low Mw and low PDI can be challenging, as it requires tight regulation of reaction conditions, enzyme activity, and precursor concentrations. We propose a novel approach utilizing synthetic biology principles to precisely control heparosan biosynthesis in bacteria. Our strategy involves designing a biomolecular controller that can regulate the expression of genes involved in heparosan biosynthesis. This controller is activated by biosensors that detect heparosan precursors, allowing for fine-tuned control of the polymerization process. Through this approach, we foresee the implementation of this synthetic device, demonstrating the potential to produce low Mw and low PDI heparosan in the probiotic E. coli Nissle 1917 as a biosafe and biosecure biofactory. This study represents a significant advancement in the field of heparosan production, offering new opportunities for the development and manufacturing of biomaterials with tailored properties for diverse biomedical applications., This work was partially supported by the following funding sources: MCIN/AEI/10.13039/501100011033 project numbers PID2023-151077OB-I00, PID2020-117271RB-C21 and AYUDA PAID06-24 (20250092) from Universitat Politècnica de Valéncia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photonic-Assisted Analog-to-Digital Conversion Based on a Dispersion-Diversity Multicore Fiber

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Ureña-Gisbert, Mario
[EN] Multigigabit-per-second photonic-assisted time-interleaved analog-to-digital conversion (ADC) built upon a dispersion-diversity multicore fiber (MCF) is proposed and experimentally demonstrated for the first time to our knowledge. Tunable true-time delay line operation for the analog signal replicas is provided by the different cores of a heterogeneous MCF, which feature different radial dimensions and GeO2 dopant concentrations. Continuous real-time ADC tunability with the optical wavelength is experimentally demonstrated by time interleaving 5 digitized channels achieving equivalent sampling rates of 25, 50 and 125 GS/s for optical wavelengths of 1538, 1534 and 1531.6 nm, respectively. These values are beyond the 10.25-GS/s sampling rates offered by commercial electronic ADCs. One of the advantages of using a MCF for the parallel channels relies on the fact that all the cavities are subject to similar environmental conditions. The introduction of space and dispersion diversities provided by MCFs in photonic-assisted ADCs brings benefits in terms of size, weight, and power consumption reduction along with system flexibility and stability improvement. This is of particular relevance in those application scenarios where an optical fiber link is required to distribute the signal, such as fiber distributed sensing networks, as well as access networks for radar systems or next-generation wireless communications., This work was supported in part by ERC Consolidator under Grant 724663, in part by the Spanish Ministerio de Ciencia e Innovacion under Grant PID2020-118310RB-100, in part by the Generalitat Valenciana Advanced Instrumentation for World Class Microwave Photonics Research under Grant IDIFEDER/2018/031, in part by Generalitat Valenciana PROMETEO/2021/15 Research Excellency Award, and in part by the Universitat Politecnica deValencia PAID-10-21 fellowship for Sergi Garcia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electropolymerization of PPy, PEDOT, and PANi on WO3 nanostructures for high-performance anodes in Li-ion batteries

  • Roselló-Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this research work, four distinct WO3 electrodes were synthesized and coated with three different polymers, known as polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) in poly(4-styrenesulfonate) (PEDOT:PSS) and polyaniline (PANi), using electropolymerization techniques. The morphological features of the samples were thoroughly characterized through Field Emission Scanning Electron Microscopy (FE-SEM) and Atomic Force Microscopy (AFM) analyses. Additionally, contact angle measurements and electrochemical characterizations were used to verify the performance of each electrode, aiding in the prediction of their suitability for energy storage applications in lithium-ion batteries. The electrodes were subsequently employed as anodes in lithium-ion batteries, and charge-discharge cycles were performed to analyze its specific capacity, and the Electrochemical Impedance Spectroscopy (EIS) technique was employed to analyze its behavior both before and after cycling. The results revealed superior performance for WO3 electrodes with PEDOT:PSS coating electropolymerized during 100 min at 0.4 mA. This comprehensive investigation not only sheds light on the synthesis and morphological characteristics of WO3 electrodes but also highlights the crucial role of PEDOT:PSS in enhancing electrochemical behavior for efficient energy storage applications., The authors wish to thank the economic support granted by AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033). G. Rosello-Marquez is also grateful to UPV for the post-doctoral grant (PAID-10-21) and the grant to support postdoctoral research at UPV (PAID-PD-22), as well as to Generalitat Valenciana for the research stays in centers located outside the Valencian Community (CIBEST 2022). M. Cifre-Herrando acknowledges the Ministerio de Universidades for the pre-doctoral grant (FPU19/02466).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Facile preparation of electrodes based on WO3 nanostructures modified with C and S used as anode materials for Li-ion batteries

  • Roselló-Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] An appropriate morphological and structure matrix configuration where lithium ions could insert and de-insert is essential for lithium-ion batteries (LiB). Tungsten oxides (WO3) are especially attractive materials for this aim. In this research, the effects of the morphology and composition of WO3 nanostructures on the charge/discharge behavior for Li-ion batteries are methodically examined. On the one hand, nanostructured WO3 thin film was effectively synthesized by an electrochemical procedure. Then, an annealing treatment at 600°C in air environment for 4 h was carried out. In the second electrode synthesized, a carbon layer was uniformly deposited on WO3 nanostructures to obtain a WO3/C electrode. Finally, WO3/WS2 electrodes were prepared by means of in situ sulfurization of WO3 one-step solid-state synthesis using tungsten trioxide (WO3) and thiourea as precursor material. By using X-ray photoelectron spectroscopy, X-ray diffraction analysis, transmission electron microscopy, Raman spectra, and field-emission scanning electron microscopy, the three electrodes have been morphologically characterized. Electrochemical properties were analyzed by cyclic voltammogram, galvanostatic charge/discharge cycling, and electrochemical impedance spectroscopy. Among all the synthesized samples, WO3/C nanostructures reveal the best performance as they exhibit the greatest discharge capacity and cycle performance (820 mA h g¿1)., UPV for the concession of a postdoctoral, Grant/Award Number: PAID-10-21; Ministerio de Universidades for the concession of the predoctoral, Grant/Award Number: FPU19/02466; Comunitat Valenciana, Grant/Award Number: IDIFEDER/18/044
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advancements in synthetic biology-based bacterial cancer therapy: A modular design approach

  • Arboleda-García, Mario Andrés|||0000-0001-9647-9949
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Jantus-Lewintre, Eloisa|||0000-0001-7395-4380
  • Alarcon-Ruiz, Ivan
  • Boada-Acosta, Lissette
[EN] Synthetic biology aims to program living bacteria cells with artificial genetic circuits for user-defined functions, transforming them into powerful tools with numerous applications in various fields, including oncology. Cancer treatments have serious side effects on patients due to the systemic action of the drugs involved. To address this, new systems that provide localized antitumoral action while minimizing damage to healthy tissues are required. Bacteria, often considered pathogenic agents, have been used as cancer treatments since the early 20th century. Advances in genetic engineering, synthetic biology, microbiology, and oncology have improved bacterial therapies, making them safer and more effective. Here we propose six modules for a successful synthetic biology-based bacterial cancer therapy, the modules include Payload, Release, Tumor-targeting, Biocontainment, Memory, and Genetic Circuit Stability Module. These will ensure antitumor activity, safety for the environment and patient, prevent bacterial colonization, maintain cell stability, and prevent loss or defunctionalization of the genetic circuit., This research was funded by MCIN/AEI/10.13039/501100011033 Grant numbers PID2020-117271RB-C21 and TED2021-131049B-I00, Generalitat Valenciana GVA Grant CIAICO/2021/159, Centro de Investigacion Biomedica en Red de Cancer (CIBERONC) Grant CB16-12-00350, Instituto de Salud Carlos III (Grant PI22/01221) , and GVA Grant AICO/2021/333.A Arboleda-Garcia thanks the Grant PAID-01-21 Programa de Ayudas de Investigacion y Desarrollo from Universitat Politecnica de Valencia, Spain. I Alarcon-Ruiz thanks the FPU grant (FPU20/04814) from the Spanish Government. L Boada-Acosta thanks the Grant Santiago Grisolia GRISOLIAP/2021/030 from Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital and Generalitat Valenciana, Spain. Y Boada is thankful for the Grant PAID-10-21 Acceso al Sistema Espanol de Ciencia e Innovacion from Universitat Politecnica de Valencia, Spain; and the Scholarship Convocatoria Abierta 2011 from Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion, Ecuador. The authors are grateful to Prof. Jesus Pico for his guidance during the preparation of this manuscript. Bio Render was used to illustrate the figures under a paid license for publication authorization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Layered topological semimetal GaGeTe: New polytype with non-centrosymmetric structure

  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Bandiello, Enrico|||0000-0003-0956-3195
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Liang, A.
  • Da Silva, E. Lora
  • Rodriguez-Hernandez, P.
  • Muñoz, A.
  • Radescu, S.
  • Romero, A.H.
  • Drasar, C.
  • Errandonea, D.
[EN] GaGeTe is a layered van der Waals material composed of germanene and GaTe sublayers that has been recently predicted to be a basic Z2 topological semimetal. To date, only one polytype of GaGeTe is known with trigonal centrosymmetric structure (a phase, space group R-3m, No. 166). Here we show that asgrown samples of GaGeTe show traces of at least another polytype with hexagonal noncentrosymmetric structure (f3 phase, space group P63mc, No. 186). Moreover, we suggest that another bulk hexagonal polytype (g phase, space group P-3m1, No. 164) could also be found near room conditions. Both a and f3 polytypes have been identified and characterized by means of X-ray diffraction and Raman scattering measurements with the support of ab initio calculations. We provide the vibrational properties of both polytypes and show that the Raman spectrum reported for GaGeTe almost forty years ago and attributed to the a phase, was, in fact, that of the secondary f3 phase. Additionally, we show that a Fermi resonance occurs in a-GaGeTe under non-resonant excitation conditions, but not under resonant excitation conditions. Theoretical calculations show that bulk f3-GaGeTe is a non-centrosymmetric weak topological semimetal with even smaller lattice thermal conductivity than centrosymmetric bulk aGaGeTe. In perspective, our work paves the way for the control and engineering of GaGeTe polytypes to design and implement complex van der Waals heterostructures formed by a combination of centrosymmetric and non-centrosymmetric layers of up to three different polytypes in a single material, suitable for a number of fundamental studies and technological applications., This publication is part of the project MALTA Consolider Team network (RED2018-102612-T) , financed by MINECO/AEI/10.13039/501100003329; by I ? D ? i projects PID2019-106383 GB -41/42/43 financed by MCIN/AEI/10.13039/501100011033; and by project PROMETEO/2018/123 (EFIMAT) financed by Generalitat Valenciana. E.B. would like to thank the Universitat Politecnica de Valencia for his postdoctoral contract (Ref. PAID -10-21) . AHR was supported by the U.S. Department of Energy (DOE) , Office of Science, Basic Energy Sciences under award DE-SC0021375. We also acknowledge the computational resources awarded by XSEDE, a project supported by National Science Foundation grant number ACI-1053575. The authors also acknowledge the support from the Texas Advances Computer Center (with the Stampede2 and Bridges supercom- puters) . E.L.d.S would like to acknowledge the Network of Extreme Conditions Laboratories (NECL) , financed by FCT and co -financed by NORTE 2020, through the program Portugal 2020 and FEDER; the High Performance Computing Chair-a R & D infrastructure (based at the University of ? Evora; PI: M. Avillez) ; and for the computational support provided by the HPC center OBLIVION -U. ? Evora to perform the lattice thermal conductivity calculations. A.L. and D.E. would like to thank the Generalitat Valenciana for the Ph.D. Fellowship no. GRISOLIAP/2019/025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and electrochemical characterization of modified WO3 nanostructures for lithium-ion battery anodes

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] This research explores the electrochemical performance of tungsten trioxide (WO3) nanostructures as anodes in lithium-ion batteries, with a focus on the impact of synthesis modifications. Three types of WO3 nanostructures have been synthesized: basic (B-WO3), isopropanol-modified (Isop-WO3), and molybdenum-doped (Mo-WO3). Characterization was performed using Field Emission Scanning Electron Microscopy, X-ray Diffraction, and X-ray Photoelectron Spectroscopy to analyze their structural and chemical properties. Electrochemical tests were carried out to the nanostructures, showing that modifications in the electrolyte composition significantly enhanced the electrochemical properties of WO3 nanostructures. Particularly, the incorporation of isopropanol and molybdenum into the synthesis process led to nanostructures with increased donor density and enhanced electrical conductivity, thereby improving the overall electrochemical performance of the nanostructures. Finally, lithium-ion batteries were fabricated using the nanostructures as anode and their performance was evaluated. Electrochemical assessments included Cyclic Voltammetry, Electrochemical Impedance Spectrocopy and Charge-Discharge tests. The hybrid Mo-WO3 nanostructure exhibited the best performance, showing lower charge transfer resistance and greater structural stability, attributed to molybdenum's beneficial effects. These findings suggest that tailored nanostructure synthesis can significantly enhance lithium-ion battery efficiency, contributing to the progression of advanced energy storage solutions., The authors wish to thank the economic support granted by Ministerio de Ciencia e Innovacion (PID2019-105844RB-I00/AEI/10.13039/501100011033) . M. Cifre-Herrando acknowledges the Ministerio de Universidades for the pre-doctoral grant (FPU19/02466) . G. Rosello -Marquez is also grateful to UPV for the post-doctoral grant (PAID-10-21) and the grant to support postdoctoral research at UPV (PAID-PD-22) . The authors wish to thank the project co-funded by the FEDER operational program 2014-2020 of the Comunitat Valenciana (IDIFEDER/18/044) for the financial funding. Additionally, funding from the Spanish Research Network E3TECH-PLUS (RED2022-134552-T, MICINN/AEI) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dispersion-Diversity Multicore Fiber Signal Processing

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Ureña-Gisbert, Mario
[EN] Beyond playing a primary role in high-capacity communication networks, multicore optical fibers can bring many advantages to optical and microwave signal processing, as not only space but also chromatic dispersion are introduced as new degrees of freedom. The key lies in developing radically new multicore fibers where the refractive index profile of each individual core is tailored properly to provide parallel dispersion-diversity signal processing with application in a variety of scenarios such as parallel channel equalization, analogue-to-digital conversion, optical computing, pulse generation and shaping, multiparameter fiber sensing, medical imaging, optical coherence tomography, broad-band measurement instrumentation, and next-generation fiber-wireless communications. Here, we experimentally prove, for the first time to our knowledge, reconfigurable two-dimensional dispersion-managed signal processing performed by a novel dispersion-diversity heterogeneous multicore fiber. The fiber comprises seven different trench-assisted cores featuring a different refractive index profile in terms of both radial geometry and core dopant concentration. As a representative application case, we demonstrate reconfigurable microwave signal filtering with increased compactness as well as performance flexibility and versatility as compared to previous technologies., The authors acknowledge financial support by the European Research Council Consolidator Grant 724663, the Spanish Ministerio de Ciencia e Innovacion Project PID2020118310RB-100, and the Generalitat Valenciana Projects IDIFEDER/2018/031 and PROMETEO/2021/15, as well as the Universitat Politecnica de Valencia PAID-10-21 fellowship for S.G.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photonic Temporal Operators for Microwave Signals Enabled by Multicore Fibers

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We present, to the best of our knowledge, a novel approach to implement photonic temporal operators for microwave signals using dispersion-diversity heterogeneous multicore fibers. The signal samples are created by the distinct fiber cores, which are dispersion-engineered to offer tunable true time delay line operation. We showcase photonic temporal operators enabled through a 5-km long dispersion-diversity seven-core heterogeneous multicore fiber true time delay line, successfully demonstrating up to the fourth-order temporal differentiation and seven-sample temporal integration, with integration windows ranging from 350 up to 700 ps, for different microwave signals. The proposed scheme holds promise for scalability and parallel implementation of different temporal operators, opening avenues for further advancements in optical computing and signal processing systems. In comparison with other methods, our solution provides important benefits in terms of power consumption, compactness and seamless integration with optical networks. This work paves the way for enhanced performance and efficiency in optical communication and signal processing systems as the multicore fiber provides the medium for both signal processing and distribution functionalities., This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion under Project PID2020-118310RB-100 and in part by Generalitat Valenciana under Project PROMETEO/2021/15. The work of Sergi Garcia was supported by the Universitat Politecnica de Valencia under Grant PAID-10-21 Fellowship.