Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

High-temperature oxygen-assisted molecular beam epitaxy of BaWO <sub>4</sub> on W(110): growth mechanism and structural characterization

  • Gutiérrez-Cuesta, Clara
  • Rojo, Víctor
  • Prieto, José Emilio
  • Mandziak, Anna
  • Nita, Pawel
  • del Campo, Adolfo
  • Kwiatek-Maroszek, Natalia
  • Cojocariu, Iulia
  • Szpytma, Marcin
  • Fevola, Giovanni
  • Mascaraque Susunaga, Arantzazu
  • Marco, José F.
  • Mentes, Tevfik Onur
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
We have studied the growth of barium tungstate, BaWO4, by high-temperature oxygen-assisted molecular beam epitaxy on W(110). Barium tungstate grows in the form of isosceles triangular-shaped islands, tens of micrometers wide and tens of nanometers in height. The growth was monitored in real time by low-energy electron microscopy and characterized in situ by low-energy electron diffraction, X-ray absorption and X-ray photoelectron spectroscopies. Further ex situ characterization was performed by optical and atomic force microscopies and Raman spectroscopy. Barium tungstate growth on W(110) was performed by dosing only barium in a molecular oxygen atmosphere due to incorporation of W atoms from the W(110) substrate. The islands correspond to the BaWO4 (011) crystallographic orientation and their sides are aligned along the [001] and [11̄1] directions of the BaWO4 crystal.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailoring the Lithium Concentration in Thin Lithium Ferrite Films Obtained by Dual Ion Beam Sputtering

  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Hernández-Gómez, Cayetano
  • Román-Sánchez, Sara
  • París Ogáyar, Marina|||0000-0002-4816-7729
  • Gorni, Giulio
  • Prieto, José Emilio|||0000-0003-2092-6364
  • Serrano, Aida|||0000-0002-6162-0014
Thin films of lithium spinel ferrite, LiFeO, have attracted much scientific attention because of their potential for efficient excitation, the manipulation and propagation of spin currents due to their insulating character, high-saturation magnetization, and Curie temperature, as well as their ultra-low damping value. In addition, LiFeO is currently one of the most interesting materials in terms of developing spintronic devices based on the ionic control of magnetism, for which it is crucial to control the lithium's atomic content. In this work, we demonstrate that dual ion beam sputtering is a suitable technique to tailor the lithium content of thin films of lithium ferrite (LFO) by using the different energies of the assisting ion beam formed by Ar + and O + ions during the growth process. Without assistance, a disordered rock-salt LFO phase (i.e., LiFeO) can be identified as the principal phase. Under beam assistance, highly out-of-plane-oriented (111) thin LFO films have been obtained on (0001) AlO substrates with a disordered spinel structure as the main phase and with lithium concentrations higher and lower than the stoichiometric spinel phase, i.e., LiFeO. After post-annealing of the films at 1025 K, a highly ordered ferromagnetic spinel LFO phase was found when the lithium concentration was higher than the stoichiometric value. With lower lithium contents, the antiferromagnetic hematite (α-FeO) phase emerged and coexisted in films with the ferromagnetic LiFeO. These results open up the possibility of controlling the properties of thin lithium ferrite-based films to enable their use in advanced spintronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying Li-content for compositional tailoring of lithium ferrite ceramics

  • Granados-Miralles, Cecilia
  • Serrano Rubio, Aída
  • Prieto, P.
  • Guzmán-Mínguez, J. C.
  • Prieto, J. E.
  • Friedel, A. M.
  • García-Martín, Eduardo
  • Fernández, J. F.
  • Quesada, Adrián
9 pags., 6 figs., 3 tabs., Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest damping ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in turn, the performance of functional devices based on these materials. Despite this, lithium content is rarely accurately quantified, as a result of the low number of electrons in Li hindering its identification by means of routine materials characterization methods. In the present work, magnetic lithium ferrite powders with Li:Fe ratios of 1:1, 1:3 and 1:5 have been synthesized, successfully obtaining phase-pure materials (LiFeO2 and LiFe5O8), as well as a controlled mixture of both phases. The powders have been compacted and subsequently sintered by thermal treatment (Tmax = 1100 °C) to fabricate dense pellets which preserve the original Li:Fe ratios. Li-content on both powders and pellets has been determined by two independent methods: (i) Rutherford backscattering spectroscopy combined with nuclear reaction analysis and (ii) Rietveld analysis of powder X-ray diffraction data. With good agreement between both techniques, it has been confirmed that the Li:Fe ratios employed in the synthesis are maintained in the sintered ceramics. The same conclusion is drawn from spatially-resolved confocal Raman microscopy experiments on regions of a few microns. Field emission scanning electron microscopy has evidenced the substantial grain growth taking place during the sintering process – mean particle sizes rise from ≈ 600 nm in the powders up to 3.8(6) µm for dense LiFeO2 and 10(2) µm for LiFe5O8 ceramics. Additionally, microstructural analysis has revealed trapped pores inside the grains of the sintered ceramics, suggesting that grain boundary mobility is governed by surface diffusion. Vibrating sample magnetometry on the ceramic samples has confirmed the expected soft ferrimagnetic behavior of LiFe5O8 (with Ms = 61.5(1) Am2/kg) and the paramagnetic character of LiFeO2 at room temperature. A density of 92.7(6)% is measured for the ceramics, ensuring the mechanical integrity required for both their direct utilization in bulk shape and their use as targets for thin-film deposition., This work has been supported by grants RTI2018-095303-B-C51 and RTI2018-095303-A-C52 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and grants PID20210124585NB-C31, PID2021–124585NB-C32 and PID2021-124585NB-C33 funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. C.G.-M. acknowledges financial support from grant FJC2018–035532-I funded by MCIN/AEI/ 10.13039/501100011033 and grant RYC2021–031181-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. A.S. acknowledges financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract No. 2017-t2/IND5395 and grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. A.Q. acknowledges financial support from grant RYC-2017023320 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”. The authors acknowledge support from CMAM for beamtime proposals with codes STD019/20, STD026/20 and STD033/20., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Remanence Increase in SrFe12O19/Fe Exchange-Decoupled Hard-Soft Composite Magnets Owing to Dipolar Interactions

  • Guzmán-Mínguez, J. C.
  • Granados-Miralles, Cecilia
  • Kuntschke, Patrick
  • Julián Fernández, César de
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Schliesch, Thomas
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
In the search for improved permanent magnets, fueled by the geostrategic and environmental issues associated with rare-earth-based magnets, magnetically hard (high anisotropy)-soft (high magnetization) composite magnets hold promise as alternative magnets that could replace modern permanent magnets, such as rare-earth-based and ceramic magnets, in certain applications. However, so far, the magnetic properties reported for hard-soft composites have been underwhelming. Here, an attempt to further understand the correlation between magnetic and microstructural properties in strontium ferrite-based composites, hard SrFe<sub>12</sub>O<sub>19</sub> (SFO) ceramics with different contents of Fe particles as soft phase, both in powder and in dense injection molded magnets, is presented. In addition, the influence of soft phase particle dimension, in the nano- and micron-sized regimes, on these properties is studied. While Fe and SFO are not exchange-coupled in our magnets, a remanence that is higher than expected is measured. In fact, in composite injection molded anisotropic (magnetically oriented) magnets, remanence is improved by 2.4% with respect to a pure ferrite identical magnet. The analysis of the experimental results in combination with micromagnetic simulations allows us to establish that the type of interaction between hard and soft phases is of a dipolar nature, and is responsible for the alignment of a fraction of the soft spins with the magnetization of the hard. The mechanism unraveled in this work has implications for the development of novel hard-soft permanent magnets., This work was supported by the European Commission through Project H2020 No. 720853 (AMPHIBIAN). It is also supported by the Spanish Ministry of Science and Innovation through Grants RTI2018-095303-BC51, RTI2018-095303-A-C52, PID2021-124585NB-C33, TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”. Financed by the European Union—NextGenerationEU (National Sustainable Mobility Center CN00000023, Italian Ministry of University and Research Decree n. 1033—17/06/2022, Spoke 11—Innovative Materials and Lightweighting). C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. A.Q. acknowledges financial support from MICINN through the Ramón y Cajal Program (RYC-2017-23320)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Ni substitution on the antiferromagnetic domains of cobalt oxide

  • Mandziak, Anna
  • de la Figuera, Juan
  • Quesada, Adrián
  • Berja, Alba
  • Granados-Miralles, Cecilia
  • Prieto, J. E.
  • Aballe, Lucía
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Nita, Pawel
9 pags., 8 figs., We present a spatially resolved X-ray magnetic linear dichroism study of high quality micron-sized mixed nickel-cobalt oxide (NCO) crystals. NixCo1-xO was prepared in-situ by high-temperature oxygen-assisted molecular beam epitaxy on a Ru(0001) single crystal substrate. To check the effect of incorporating Ni into the cobalt oxide films, three different compositions were prepared. The element-specific XMLD measurements reveal strong antiferromagnetic contrast at room temperature and magnetic domains up to one micron in size, reflecting the high structural quality of the NCO islands. By means of vectorial magnetometry, the antiferromagnetic spin axis orientation of the domains was determined with nanometer spatial resolution, and found to depend on the stoichiometry of the prepared crystals., This research was funded by the SciMat Priority Research Area budget under the program Excellence Initiative - Research University at the Jagiellonian University in Kraków - Grant No. 75.1920.2021, by Projects No. PID2021-124585NB-C31 and PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Projects No. TED2021-130957B-C54 and TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave Field-Induced Changes in Raman Modes and Magnetic Force Images of Antiferromagnetic NiO Films

  • Caso, Diego
  • Serrano Rubio, Aída
  • Jaafar, Miriam
  • Prieto Recio, Pilar
  • Kamra, Akashdeep
  • González-Ruano, César
  • Aliev, Farkhad G.
Effective control of domain walls or magnetic textures in antiferromagnets promises to enable robust, fast, and nonvolatile memories. The lack of net magnetic moment in antiferromagnets implies the need for creative ways to achieve such a manipulation. We conducted a study to investigate changes in magnetic force microscopy (MFM) imaging and in the magnon-related mode in Raman spectroscopy of virgin NiO films under a microwave pump. After MFM and Raman studies were conducted, a combined action of broadband microwave (0.01–20 GHz, power scanned from −20 to 5 dBm) and magnetic field (up to 3 kOe) were applied to virgin epitaxial (111) NiO and (100) NiO films grown on (0001) Al2 O3 and (100) MgO substrates, following which the MFM and Raman studies were repeated. We observed a suppression of the magnon-related Raman mode subsequent to the microwave exposure. Based on MFM imaging, this effect appeared to be caused by the suppression of large antiferromagnetic domain walls due to the possible excitation of antiferromagnetic spin oscillations localized within the antiferromagnetic domain walls., This research was funded by the Spanish Ministerio de Ciencia e Innovación (PID2021-124585NB-C32, PID2021-124585NB-C33, PID2021-122980OA-C53, and TED2021-130196B-C22). F.G.A. also acknowledges financial support from the Spanish Ministerio de Ciencia e Innovación through the María de Maeztu Programme for Units of Excellence in R&D (CEX2018-000805-M) and “Acción financiada por la Comunidad de Madrid en el marco del convenio plurianual con la Universidad Autónoma de Madrid en Línea 3: Excelencia para el Profesorado Universitario”. P.P. acknowledges the support of the Comunidad de Madrid and Universidad Autonoma de Madrid under the V PRICIT program through the Project SI3/PJI/2021-00393. A.S. acknowledges the financial support from MICINN for a Ramón y Cajal contract (RYC2021-031236-I), which was funded by the Recovery, Transformation and Resilience Plan., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the Substrate on the Exchange Coupling of NiO/FeCo Bilayers

  • Lorenzo-Feijoo, Iker
  • Serrano Rubio, Aída
  • Hernández-Gómez, Cayetano
  • Cuñado, José Luis F.
  • Prieto, Pilar
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., https://creativecommons.org/licenses/by/4.0/, Antiferromagnetic/ferromagnetic (AF/F) systems have been extensively investigated due to the importance that interfacial exchange coupling effects have in the development of magnetic storage technologies. Recently, these systems have garnered interest for the potential they have to imprint the magnetic moments of the AF into an F layer, offering the possibility of using it as a read-out mechanism in antiferromagnetic spintronics. In this study, we explored the importance of crystalline orientation and strains induced by the substrate in the exchange coupling properties of NiO/FeCo AF/F bilayers. For that, we have grown NiO/FeCo bilayers on MgO (001) and Al2O3 (0001) substrates varying the FeCo layer thickness. In addition, we have analyzed both deposited samples and those with induced interfacial unidirectional anisotropy. For inducing such interfacial anisotropy, we used a field cooling procedure, heating the bilayers to 650 K and subsequently cooling down to room temperature under the presence of an external magnetic field of 300 mT. We have investigated the effect of the substrate in terms of crystalline orientation and lattice mismatching on the AF/F exchange coupling as well as the dependence of the coercivity and exchange bias on the inverse F layer thickness that is consistent with the interfacial origin of the AF/F exchange coupling. Moreover, the angular dependence of the magnetic properties was explored by using vectorial Kerr magnetometry, confirming the presence of both magnetocrystalline anisotropy, arising from the epitaxial character of the growing process mainly when the bilayer is grown on MgO (001) substrates, and the field cooling (FC)-induced unidirectional anisotropy., The work in Madrid was supported by the Spanish Ministry of Science and Innovation (PID2021-124585NBC32, TED2021-130196B-C22) and Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) grants. A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe”, by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033, by the “European Union NextGenerationEU/PRTR” from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033, and by the “European Union NextGenerationEU/PRTR”. J.L.F.C acknowledges financial support from IMDEA nanociencia as well as from project SOnanoBrain (MINECO, PID2020-116181RB-C31)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural Defects on Graphene Generated by Deposition of CoO: Effect of Electronic Coupling of Graphene

  • Hernández-Gómez, Cayetano
  • Prieto, Pilar
  • Morales, Carlos
  • Serrano Rubio, Aída
  • Flege, Jan Ingo
  • Méndez, Javier
  • García-Pérez, Julia
  • Granados, Daniel
  • Soriano, Leonardo
Understanding the interactions in hybrid systems based on graphene and functional oxides is crucial to the applicability of graphene in real devices. Here, we present a study of the structural defects occurring on graphene during the early stages of the growth of CoO, tailored by the electronic coupling between graphene and the substrate in which it is supported: as received pristine graphene on polycrystalline copper (coupled), cleaned in ultra-high vacuum conditions to remove oxygen contamination, and graphene transferred to SiO2/Si substrates (decoupled). The CoO growth was performed at room temperature by thermal evaporation of metallic Co under a molecular oxygen atmosphere, and the early stages of the growth were investigated. On the decoupled G/SiO2/Si samples, with an initial low crystalline quality of graphene, the formation of a CoO wetting layer is observed, identifying the Stranski-Krastanov growth mode. In contrast, on coupled G/Cu samples, the Volmer-Weber growth mechanism is observed. In both sets of samples, the oxidation of graphene is low during the early stages of growth, increasing for the larger coverages. Furthermore, structural defects are developed in the graphene lattice on both substrates during the growth of CoO, which is significantly higher on decoupled G/SiO2/Si samples mainly for higher CoO coverages. When approaching the full coverage on both substrates, the CoO islands coalesce to form a continuous CoO layer with strip-like structures with diameters ranging between 70 and 150 nm., The work was supported by the Spanish Ministry of Science and Innovation by the projects PID2021-124585NBC32, PID2021-124585NB-C33, and PID2020-113142RB-C21) funded by MCIN/AEI/10.13039/501100011033 and by the projects TED2021-130196B-C22 and TED2021-130957B-C51 funded by the MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR“. The work was also supported by the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) grant. A.S. acknowledges the financial support of the grant RYC2021-031236-I funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRT. C. Morales thanks the Postdoc Network Brandenburg for a PNB individual grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring the Lithium Concentration in Thin Lithium Ferrite Films Obtained by Dual Ion Beam Sputtering

  • Prieto Recio, Pilar
  • Hernández-Gómez, Cayetano
  • Román-Sánchez, Sara
  • París Ogáyar, Marina
  • Gorni, Giulio
  • Prieto, J. E.
  • Serrano Rubio, Aída
Thin films of lithium spinel ferrite, LiFe5O8, have attracted much scientific attention because of their potential for efficient excitation, the manipulation and propagation of spin currents due to their insulating character, high-saturation magnetization, and Curie temperature, as well as their ultra-low damping value. In addition, LiFe5O8 is currently one of the most interesting materials in terms of developing spintronic devices based on the ionic control of magnetism, for which it is crucial to control the lithium’s atomic content. In this work, we demonstrate that dual ion beam sputtering is a suitable technique to tailor the lithium content of thin films of lithium ferrite (LFO) by using the different energies of the assisting ion beam formed by Ar+ and O2 + ions during the growth process. Without assistance, a disordered rock-salt LFO phase (i.e., LiFeO2) can be identified as the principal phase. Under beam assistance, highly out-of-plane-oriented (111) thin LFO films have been obtained on (0001) l2O3 substrates with a disordered spinel structure as the main phase and with lithium concentrations higher and lower than the stoichiometric spinel phase, i.e., LiFe5O8. After post-annealing of the films at 1025 K, a highly ordered ferromagnetic spinel LFO phase was found when the lithium concentration was higher than the stoichiometric value. With lower lithium contents, the antiferromagnetic hematite (α-Fe2O3) phase emerged and coexisted in films with the ferromagnetic LixFe6-xO8. These results open up the possibility of controlling the properties of thin lithium ferrite-based films to enable their use in advanced spintronic devices, The work was supported by the Spanish Ministry of Science and Innovation through the projects PID2021-124585NBC32, PID2021-124585NB-C33, PID2021-124585NB-C31, and PID2020-113142RB-C21 funded by MCIN/AEI/10.13039/501100011033 and “ERDF: A way of making Europe”, and by the projects TED2021-130196B-C22, TED2021-130957B-C51, and TED2021-130957B-C54, funded by the MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR ”. This work has also been supported by the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) grant. Parts of these experiments were performed at the CLAESS-BL22 beamline of the ALBA synchrotron through an experiment with the reference number 2022025654 and in collaboration with ALBA staff. We acknowledge support from CMAM for the beamtime proposals STD012/22 and 028/22. A.S. acknowledges the financial support of the RYC2021-031236-I grant funded by the MCIN/AEI/10.13039/501100011033 and the “European Union NextGeneration EU/PRTR”. M.P.O. acknowledges the financial support from MICINN for an FPU (FPU20/03166), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ICEMS Characterization of NixFe3-xO4 (0.7 ≤ x ≤ 1.7) thin films grown by ion beam sputtering on (0001) Al2O3 substrates

  • Prieto, P.
  • Prieto, J. E.
  • Serrano, A.
  • de la Figuera, Juan
  • Marco, J.F.
10 pags., 3 figs., 2 tabs., We report here on the ICEMS characterization of nickel ferrite (NiFeO) thin films having different nickel contents grown on alumina substrates by Ion Beam Sputtering. The spectra corresponding to the films with nominal x = 0.7, 1.0 and 1.2 are characteristic of compounds crystallizing in a spinel-related structure showing two different magnetic sextets associated with Fe located in the tetrahedral and octahedral sites of such structure. The spectra show an additional broad third sextet with a large isomer shift which suggests the occurrence of electron hopping between Fe and Fe ions sitting in the octahedral sites. With increasing nickel content, the linewidth of the sextets increases and their corresponding hyperfine magnetic fields decrease. This is an indication of an increase in structural disorder in the deposited films as their nickel concentrations increase. The cation distribution of the iron ions over the tetrahedral and octahedral sites appears also to depend on the nickel content. The film with x = 1.2 shows a significant increase in the fraction of octahedral iron ions as compared with the expected nominal value suggesting that, for this composition, some Ni could also occupy tetrahedral sites. The Mössbauer spectrum corresponding to the film with x = 1.7 shows a magnetic pattern with very broad lines similar to those shown by amorphous or disordered materials. The average isomer shift is quite high (around 0.40 mms) and characteristic of Fe in octahedral oxygen coordination. This indicates that for the largest nickel content studied (x = 1.7), the film does not contain Fe in tetrahedral environments suggesting that the spinel structure is no longer present. This correlates well with the X-Ray Diffraction data which indicate a structural change from spinel to a disordered rock-salt structure for this particular film with high nickel content., This work has been supported by projects PID2021-124585NB-C31, PID2021-124585NB-C32 and PID2021-124585NB-C33 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project No. TED2021-130957B-C51, TED2021-130957B-C54 and TED2021-130196B-C22 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. The authors also thank financial support from the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) and from the Comunidad de Madrid and Universidad Autónoma de Madrid under the V PRICIT program through the Project SI3/PJI/2021 − 00393. A. S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/ PRTR”. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ICEMS Characterization of NixFe3-xO4 (0.7 ≤ x ≤ 1.7) thin films grown by ion beam sputtering on (0001) Al2O3 substrates

  • Prieto, P.
  • Prieto, J. E.
  • Serrano, A.
  • de la Figuera, Juan
  • Marco, J.F.
10 pags., 3 figs., 2 tabs., We report here on the ICEMS characterization of nickel ferrite (NiFeO) thin films having different nickel contents grown on alumina substrates by Ion Beam Sputtering. The spectra corresponding to the films with nominal x = 0.7, 1.0 and 1.2 are characteristic of compounds crystallizing in a spinel-related structure showing two different magnetic sextets associated with Fe located in the tetrahedral and octahedral sites of such structure. The spectra show an additional broad third sextet with a large isomer shift which suggests the occurrence of electron hopping between Fe and Fe ions sitting in the octahedral sites. With increasing nickel content, the linewidth of the sextets increases and their corresponding hyperfine magnetic fields decrease. This is an indication of an increase in structural disorder in the deposited films as their nickel concentrations increase. The cation distribution of the iron ions over the tetrahedral and octahedral sites appears also to depend on the nickel content. The film with x = 1.2 shows a significant increase in the fraction of octahedral iron ions as compared with the expected nominal value suggesting that, for this composition, some Ni could also occupy tetrahedral sites. The Mössbauer spectrum corresponding to the film with x = 1.7 shows a magnetic pattern with very broad lines similar to those shown by amorphous or disordered materials. The average isomer shift is quite high (around 0.40 mms) and characteristic of Fe in octahedral oxygen coordination. This indicates that for the largest nickel content studied (x = 1.7), the film does not contain Fe in tetrahedral environments suggesting that the spinel structure is no longer present. This correlates well with the X-Ray Diffraction data which indicate a structural change from spinel to a disordered rock-salt structure for this particular film with high nickel content., This work has been supported by projects PID2021-124585NB-C31, PID2021-124585NB-C32 and PID2021-124585NB-C33 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project No. TED2021-130957B-C51, TED2021-130957B-C54 and TED2021-130196B-C22 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. The authors also thank financial support from the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) and from the Comunidad de Madrid and Universidad Autónoma de Madrid under the V PRICIT program through the Project SI3/PJI/2021 − 00393. A. S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/ PRTR”. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ICEMS Characterization of NixFe3-xO4 (0.7 ≤ x ≤ 1.7) thin films grown by ion beam sputtering on (0001) Al2O3 substrates

  • Prieto, P.
  • Prieto, J. E.
  • Serrano, A.
  • de la Figuera, Juan
  • Marco, J.F.
10 pags., 3 figs., 2 tabs., We report here on the ICEMS characterization of nickel ferrite (NiFeO) thin films having different nickel contents grown on alumina substrates by Ion Beam Sputtering. The spectra corresponding to the films with nominal x = 0.7, 1.0 and 1.2 are characteristic of compounds crystallizing in a spinel-related structure showing two different magnetic sextets associated with Fe located in the tetrahedral and octahedral sites of such structure. The spectra show an additional broad third sextet with a large isomer shift which suggests the occurrence of electron hopping between Fe and Fe ions sitting in the octahedral sites. With increasing nickel content, the linewidth of the sextets increases and their corresponding hyperfine magnetic fields decrease. This is an indication of an increase in structural disorder in the deposited films as their nickel concentrations increase. The cation distribution of the iron ions over the tetrahedral and octahedral sites appears also to depend on the nickel content. The film with x = 1.2 shows a significant increase in the fraction of octahedral iron ions as compared with the expected nominal value suggesting that, for this composition, some Ni could also occupy tetrahedral sites. The Mössbauer spectrum corresponding to the film with x = 1.7 shows a magnetic pattern with very broad lines similar to those shown by amorphous or disordered materials. The average isomer shift is quite high (around 0.40 mms) and characteristic of Fe in octahedral oxygen coordination. This indicates that for the largest nickel content studied (x = 1.7), the film does not contain Fe in tetrahedral environments suggesting that the spinel structure is no longer present. This correlates well with the X-Ray Diffraction data which indicate a structural change from spinel to a disordered rock-salt structure for this particular film with high nickel content., This work has been supported by projects PID2021-124585NB-C31, PID2021-124585NB-C32 and PID2021-124585NB-C33 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project No. TED2021-130957B-C51, TED2021-130957B-C54 and TED2021-130196B-C22 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. The authors also thank financial support from the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) and from the Comunidad de Madrid and Universidad Autónoma de Madrid under the V PRICIT program through the Project SI3/PJI/2021 − 00393. A. S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/ PRTR”. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ICEMS Characterization of NixFe3-xO4 (0.7 ≤ x ≤ 1.7) thin films grown by ion beam sputtering on (0001) Al2O3 substrates

  • Prieto, P.
  • Prieto, J. E.
  • Serrano, A.
  • de la Figuera, Juan
  • Marco, J.F.
10 pags., 3 figs., 2 tabs., We report here on the ICEMS characterization of nickel ferrite (NiFeO) thin films having different nickel contents grown on alumina substrates by Ion Beam Sputtering. The spectra corresponding to the films with nominal x = 0.7, 1.0 and 1.2 are characteristic of compounds crystallizing in a spinel-related structure showing two different magnetic sextets associated with Fe located in the tetrahedral and octahedral sites of such structure. The spectra show an additional broad third sextet with a large isomer shift which suggests the occurrence of electron hopping between Fe and Fe ions sitting in the octahedral sites. With increasing nickel content, the linewidth of the sextets increases and their corresponding hyperfine magnetic fields decrease. This is an indication of an increase in structural disorder in the deposited films as their nickel concentrations increase. The cation distribution of the iron ions over the tetrahedral and octahedral sites appears also to depend on the nickel content. The film with x = 1.2 shows a significant increase in the fraction of octahedral iron ions as compared with the expected nominal value suggesting that, for this composition, some Ni could also occupy tetrahedral sites. The Mössbauer spectrum corresponding to the film with x = 1.7 shows a magnetic pattern with very broad lines similar to those shown by amorphous or disordered materials. The average isomer shift is quite high (around 0.40 mms) and characteristic of Fe in octahedral oxygen coordination. This indicates that for the largest nickel content studied (x = 1.7), the film does not contain Fe in tetrahedral environments suggesting that the spinel structure is no longer present. This correlates well with the X-Ray Diffraction data which indicate a structural change from spinel to a disordered rock-salt structure for this particular film with high nickel content., This work has been supported by projects PID2021-124585NB-C31, PID2021-124585NB-C32 and PID2021-124585NB-C33 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project No. TED2021-130957B-C51, TED2021-130957B-C54 and TED2021-130196B-C22 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. The authors also thank financial support from the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) and from the Comunidad de Madrid and Universidad Autónoma de Madrid under the V PRICIT program through the Project SI3/PJI/2021 − 00393. A. S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/ PRTR”. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Promoting the circularity of ceramic materials through cold sintering of aggregates from construction and demolition waste

  • Marín Cortés, Sonia
  • Biesuz, Mattia
  • Serrano, Aida
  • De Bona, Emanuele
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
  • Sglavo, Vincenzo M.
10 pags., 6 figs., A ceramic composition containing 95 wt% of construction and demolition waste-like material was consolidated by cold sintering process at 200 °C using KOH water solutions as the liquid medium. The relative density of the samples reaches ∼90 % of the theoretical one for process conditions of 600 MPa and 60 min. A post-annealing process at 1100 °C of the as-cold sintered samples causes a slight increase in the relative density and of their mechanical strength compared with conventionally sintered samples at 1100 °C and increases the shape factor of the Weibull distribution, thus increasing the reliability of the component. It is shown that cold sintering of the material avoids its high pyroplasticity, providing low shrinkage and reducing internal defects in the ceramic. This work represents the first exploration of the viability of manufacturing ceramic tiles with high recycled content contributing to the transition to a greener world., The authors gratefully acknowledge the financial support of the European Union's Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the project PID2020-114192RB-C41 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘. The authors are grateful to the JECS Trust for funding the visit of S. M-C. to the Department of Industrial Engineering, University of Trento, Italy (Contract No. 2022336). A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘, by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’ and from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dense ceramics by cold reaction sintering using 95 % powdered construction and demolition waste and sodium silicate

  • Marín Cortés, Sonia
  • Serrano, Aida
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
10 pags. 7 figs., 2 tabs., This work explores the feasibility of producing ceramic-like materials from recycled construction and demolition waste through cold reaction sintering using sodium silicate as the liquid medium. The recycled material consists of a mixture of ceramics, mortar, and/or plasterboard - common building materials. Samples containing 95 wt% of recycled content were successfully fabricated at 150 ºC, a considerably lower temperature compared to conventional ceramic processes. These samples exhibited dense microstructures with relative densities of ∼ 90 %, as well as promising mechanical properties, including Vickers hardness values comparable to conventional bricks. In particular, samples with 30 % non-ceramic material showed more than twice the hardness when mortar was incorporated. Leaching tests confirmed the chemical stability of the material, with the incorporation of Ca²⁺ ions into non-leachable species, suggesting a reaction during CRS that enhances its durability. Additionally, FTIR analysis showed a blueshift in the signature from 973 cm⁻¹ to 1041 cm⁻¹ under more aggressive conditions, indicating structural changes and improved leachability. The primary advantage of this process would lie in the high recycled content used to create materials. This proposed new method allows obtaining dense pieces at very low temperatures, which also supposes a reduction of energy consumption, and therefore, an improvement of the sustainability of the production process. Given that this construction and demolition waste are often limited to not high added values, this approach not only supports environmental sustainability and resource conservation but also offers a viable pathway to decarbonizing the ceramic industry., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the project PID2020–114192RB-C41 and PID2021–124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project T130957B-C51ED2021– funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. A.S. acknowledges financial support from grant RYC2021–031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Finite element modeling of plasmonic resonances in photothermal gold nanoparticles embedded in cells

  • París Ogáyar, Marina
  • López-Méndez, R.
  • Figueruelo-Campanero, Ignacio
  • Muñoz-Ortiz, T.
  • Wilhelm, C.
  • Jaque, D.
  • Espinosa, Ana
  • Serrano Rubio, Aída
The use of plasmonic nanoparticles in performing photothermal treatments in cancer cells requires a full knowledge about their optical properties. The surface plasmon resonance is easily foreseen and measurable in colloidal suspensions, however it can be strongly modified when located inside cells. Assessing the optical behavior of plasmonic nanoparticles in cells is essential for an efficient and controlled treatment. This requires the combination of experimental data and computational models to understand the mechanisms that cause the change in their optical response. In this work, we investigate the plasmonic response of Au nanospheres (AuNSs) internalized into cancer cells (MCF-7). Experimental data are compared to the simulations provided by a 3D model based on a finite element method. We demonstrate the impact of physical parameters such as the type of NS assembly, the surrounding medium and the interparticle gap, in the photothermal efficiency of AuNSs. Results open the avenue to predict, by numerical calculations, the optical properties of plasmonic nanoparticles inside cells to minimize treatment costs and times in photothermal therapies. © 2024 RSC., This work has been supported by the Ministerio Español de Ciencia e Innovaci´on (MICINN) through the projects PID2021- 124585NB-C33, PID2021-127033OB-C21, RTI2018-095303-AC52 and CNS2023-144689 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe”. M. P. O., R. L. M., and I. F.-C. acknowledge the nancial support from MICINN for an FPU (FPU20/03166) and FPI (PRE2020- 96246 and PRE2020-092625) contracts, respectively. A. E. also acknowledges the nancial support from MICINN for a Ram´on y Cajal contract (RYC2020-029282-I), Comunidad de Madrid (2018-T1/IND-1005 and ASAP-CM S2022/BMD-7434) and CSIC (PIE-20226AT024). A. S. acknowledges nancial support from grant RYC2021-031236-I funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and CSIC (PIE-20236AT002). IMDEA Nanociencia acknowledges the “Severo Ochoa” program for Centres of Excellence in R&D (CEX2020-001039-S). We thank Milagros Guerra for her assistance with TEM preparation at the Electron Microscopy Service of the Centro de Biolog´ıa Molecular Severo Ochoa (CBMSO, CSIC-UAM Spain), as well as to technical personnel at ICMM-CSIC (Spain) for conducting ICP-OES measurements., Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Apparent color and Raman vibrational modes of the high-temperature superconductor Bi2Sr2CaCu2O8+δ exfoliated flakes

  • Figueruelo-Campanero, Ignacio
  • Campo, Ángel Adolfo del
  • Nieva, G.
  • González, E.M.
  • Serrano Rubio, Aída
  • Menghini, M.
Studying and controlling the properties of individual exfoliated materials is one of the first steps towards the fabrication of complex van der Waals systems. In this work, we present a systematic study of optical properties and micro-Raman spectroscopy on exfoliated flakes of the high-temperature superconductor Bi2Sr2CaCu2O 8 + δ (BSCCO-2212). We demonstrate that these are quick and non-invasive techniques for studying air sensitive materials. The apparent color of BSCCO-2212 exfoliated flakes on SiO2/Si has allowed a rough and fast identification of the number of layers. By analyzing the optical contrast of different flakes we determined the complex refractive index in the visible range and found the optimal combination of illumination wavelength and substrate properties for the identification of flakes with different thickness. In addition, we report the hardening of the most characteristic Raman modes as flake thickness decreases, possibly caused by strain in the BiO and CuO2 planes. Moreover, the evolution of the Raman modes establishes a second approach to determine the thickness of BSCCO-2212 thin flakes. As BSCCO-2212 is a challenging material due to its sensitivity to ambient conditions, the present work provides a guide for the fabrication and characterization of complex van der Waals systems paving the way for studying heterostructures based on unconventional superconductors in the 2D limit. © 2024 IOP Publishing Ltd., We thank A Parente and G Caballero and A Munoz Noval for their help with the AFM measurements and W Smith for the construction of the glove-box. I F C also thanks E Alcon for prolific discussions. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under Projects PGC2018-098613-B-C21 (SporQuMat) PID2021-122980OB-C52 (ECoSOx-ECLIPSE) and PID2021-124585NB-C33. I F C, E M G and M M acknowledge support from the 'Severo Ochoa' Programme for Centres of Excellence in R&D (Grants SEV-2016-0686 and CEX2020-001039-S). I F C holds a FPI fellowship from AEI-MCIN (PRE2020-092625). A S acknowledges the financial support from MCIN for a Ramon y Cajal Contract (No. RYC2021-031236-I), which is funded by the Recovery, Transformation and Resilience plan., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving the reliability of silicon diodes via manufacturing process modification strategies

  • Román-Sánchez, Sara
  • París Ogáyar, Marina
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
  • Moure Arroyo, Alberto
The multicomponent nature of power electronic devices can be an issue for their reliability due to the high currents and temperatures reached during operation. Proper design of each component and the system as a whole is mandatory to ensure a long lifetime and small failure rates. In this work, we systematically investigate the influence of manufacturing on the behavior of press-fit rectifier Si diodes by introducing changes in the manufacturing process. Concretely, we focused on the solder geometry and the epoxy component. Thermography measurements and computational modeling show that optimization of the solder thickness and its uniformity allows the diode to bear higher currents and temperatures close to 250 °C in the hottest parts of the device (located in the epoxy zones) without failure. In addition, choosing an adequate epoxy with a limited expansion rate over a wide temperature range helps to reduce stress and strain effects, preventing the breakdown of the diodes even at continuous currents up to 40 A. © 2023, This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the projects PID2021-124585NB-C33 and PID2020-114192RB-C41. S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. M.P.O. acknowledges financial support from the Spanish Ministry of Universities, through the FPU program (FPU20/03166) . A.S. acknowledges the financial support from MCIN for a Ramon y Cajal contract (No. RYC2021-031236-I) , which is funded by the Recovery, Transformation and Resilience plan., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of thermo-mechanical phenomena in Si-based diodes via operando confocal Raman microscopy

  • Román-Sánchez, Sara
  • Moure Arroyo, Alberto
  • Campo, Ángel Adolfo del
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
The deconvolution of the thermal and mechanical stress and other induced effects caused by the electrical current flowing through a semiconductor-based device is often quite challenging. In this work, a novel specific analysis procedure is successfully tested, based on the study of mapped regions from in situ characterization by confocal Raman microscopy. The width of Si T2g Raman mode and its position are used to determine the individual spatial distribution of all phenomena occurring in the Si chip at different current intensities. The method is applied to Si-based press-fit rectifier diodes in forward-bias conditions but can be extended to other devices. The analysis reveals the presence of several regions in the Si chip as a function of their doping level and stress magnitude. Results indicate that the Si component is subjected to a predominant thermal contribution along with other two contributions related to residual and electrically induced effects, whose values differ for each region. © 2024 The Author(s), This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the projects PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR" and PID2020-114192RB-C41 funded by MCIN/AEI/10.13039/501100011033. S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. A.S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Operando multiscale characterization of press-fit diodes as a pathway to improve their reliability, Caracterización multiescala de diodos rectificadores en condiciones de operación para mejorar su fiabilidad

  • Román-Sánchez, Sara
[EN] Silicon-based press-fit rectifier diodes play a crucial role in the automotive industry, but the mismatch between components may cause differences in their thermoelastic response and thus lead to the appearance of interfacial stress within the device in operando conditions at high temperatures. This thesis presents an exhaustive study of the behavior of various commercial Si-based press-fit rectifier diodes with different features and under different conditions. For that, a multiscale evaluation of the devices was performed by several advanced characterization methods, standing out techniques such as infrared thermography (IRT), confocal Raman microscopy (CRM) and single-crystal X-ray diffraction (SCXRD). Macroscopic thermal characterization revealed great differences in heat release between press-fit diodes, evaluating different designs and technologies during forward and reverse polarization. A reliability study based on those results, design and manufacturing process modifications were proposed and implemented by one of the commercial suppliers to improve the performance of the diodes. Microscopic and submicroscopic characterization of specific localized regions within the active Si semiconductor of the press-fit rectifier diodes was performed by ex-situ and in-operando studies enabled the semi-quantification of the different phenomena occurring at forward polarization conditions, as thermoelastic stresses and carrier dynamics, particularly at the semiconductor/solder interfaces Thus, this thesis provides a comprehensive analysis of the main parameters affecting the reliability of press-fit rectifier diodes for automotive applications. The findings highlight the importance of thermal release management and how crucial it is to optimize the design and manufacturing processes of the diodes to increase their useful lifetime. These insights will contribute to the development of more efficient press-fit rectifier diodes, ultimately improving the reliability of automotive mechanical to electrical transformation systems., [ES] Los diodos rectificadores de tipo press-fit basados en silicio desempeñan un papel crucial en la industria del automóvil. Sin embargo, el desacoplo termomécánico entre los componentes puede provocar diferencias en su respuesta termoelástica y, en consecuencia, la aparición de tensiones interfaciales dentro del dispositivo en condiciones operativas a altas temperaturas. Esta tesis presenta un estudio exhaustivo del comportamiento de diversos diodos rectificadores de tipo press-fit basados en silicio con diferentes características y bajo distintas condiciones. Para ello, se llevó a cabo una evaluación a múltiples escalas de los dispositivos mediante varios métodos avanzados de caracterización, destacando técnicas como la termografía infrarroja (IRT), la microscopía confocal Raman (CRM) y la difracción de rayos X de monocristal (SCXRD). La caracterización térmica macroscópica reveló grandes diferencias en la disipación de calor entre los diodos press-fit, evaluando distintos diseños y tecnologías durante la polarización directa e inversa. A partir de un estudio de fiabilidad basado en estos resultados, se propusieron y aplicaron modificaciones en el diseño y el proceso de fabricación por parte de uno de los proveedores comerciales para mejorar el rendimiento de los diodos. La caracterización microscópica y submicroscópica de regiones localizadas específicas dentro del semiconductor de silicio activo de los diodos rectificadores se realizó mediante estudios ex-situ y en condiciones de operación operando, lo que permitió la semicuantificación de los diferentes fenómenos que ocurren en condiciones de polarización directa, como las tensiones termoelásticas y la dinámica de los portadores, particularmente en las intercaras semiconductor/soldadura. Por lo tanto, esta tesis proporciona un análisis integral de los principales parámetros que afectan la fiabilidad de los diodos rectificadores de tipo press-fit para aplicaciones en automóviles. Los resultados destacan la importancia de la disipación térmica y subrayan la necesidad de optimizar los procesos de diseño y fabricación de los diodos para aumentar su vida útil. Estos conocimientos contribuirán al desarrollo de diodos press-fit más eficientes, mejorando así la fiabilidad de los sistemas de transformación mecánica a eléctrica dentro del campo de la automoción., Esta Tesis Doctoral ha sido realizada en el departamento de Electrocerámica del Instituto de Cerámica y Vidrio (ICV), Consejo Superior de Investigaciones Científicas (CSIC), y desarrollada en el marco del proyecto Functional Alternator Rectifier Diodes (FARDIO) financiado por la empresa SEG Automotive Germany, GmbH (Alemania). El desarrollo de este trabajo también fue posible gracias a los proyectos PID2021-124585NB-C33 y PID2020- 114192RB-C41 financiados por MCIN/AEI/10.13039/501100011033 y la ayuda RYC-2013-14436 financiada por MCIN/AEI/10.13039/501100011033 y RYC2021- 031236-I financiada por MCIN/AEI/10.13039/501100011033 y por la “Unión Europea NextGenerationEU/PRTR”. Se agradece también a The European Synchrotron Radiation Facility (The ESRF) y el CSIC por la financiación de los experimentos: A25-02-940, A25-02-997, A25- 02-1030, MA-5391 y A25-02-1074, así como al Centro de Microanálisis de Materiales (CMAM), de la Universidad Autónoma de Madrid (UAM) por la financiación de los experimentos IMP019/22 y IMP013/23., The publications included in this thesis are listed in: 1. A. Moure, A. Serrano, S. Román-Sánchez, I. Lorite, J. F. Fernández, Influence of the design on the thermal response of press-fit diodes: An infrared thermographic study, Results Phys. 22 (2021) 103909. https://doi.org/10.1016/j.rinp.2021.103909 2. A. Moure, S. Román-Sánchez, A. Serrano, I. Lorite, J. F. Fernández, In-situ thermal runaway of Si-based press-fit diodes monitored by infrared thermography, Results Phys. 19 (2020) 103529. https://doi.org/10.1016/j.rinp.2020.103529 3. S. Román-Sánchez, M. París Ogáyar, I. Lorite, J. F. Fernández, A. Serrano, A. Moure, Improving the reliability of silicon diodes via manufacturing process modification strategies, J. Mater. Res. Technol. 28 (2024) 3882-3891. https://doi.org/10.1016/j.jmrt.2023.12.155 4. S. Román-Sánchez, A. Serrano, A. del Campo, I. Lorite, J. F. Fernández, A. Moure, Thermal response of active Si in press-fit rectifier diodes by confocal Raman microscopy: Influence of diode design and technology, J. Mater. Res. Technol. 18 (2022) 2570-2581. https://doi.org/10.1016/j.jmrt.2022.03.116 5. S. Román-Sánchez, A. Moure, J. López-Sánchez, J. Rubio-Zuazo, A. del Campo, R. Calvo, I. Lorite, J. F. Fernández, A. Serrano, Structural impact in Si-based diodes with PNjunction technology under operating conditions, submitted. 6. S. Román-Sánchez, A. Moure, A. del Campo, I. Lorite, J. F. Fernández, A. Serrano, Assessment of thermo-mechanical phenomena in Si-based diodes via operando confocal Raman microscopy, Measurement. 229 (2024) 114425. https://doi.org/10.1016/j.measurement.2024.114425, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth and magnetic domain imaging of barium hexaferrite thin films with a Co overlayer, Crecimiento y visualización de dominios magnéticos de películas delgadas de hexaferrita de bario con una capa superficial de Co

  • Delgado Soria, Guiomar
  • García-Martín, Eduardo
  • Ruiz-Gómez, Sandra
  • Gutiérrez-Cuesta, Clara
  • Marco, J.F.
  • Granados-Miralles, Cecilia
  • Trapero, E. M. 
  • Sánchez-Cortés, Santiago
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • Quesada, Adrián
  • Prieto, J. E.
10 pages, 8 figures, 2 tables, This work was supported by Grants TED2021130957B-C54 and TED2021-130957B-C51, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, by Grants PID2021-124585NB-C31, PID2021-124585NB-C33 and PID2021-122980OB-C54, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA). Neither the European Union nor EACEA can be held responsible for them. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. We acknowledge support from CMAM for the beamtime proposal STD009/20., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Data for Magnetic Circular Dichroism at the Oxygen K edge in Microcrystals of Spinels Grown on Ru(0001) (arxiv 2505.24439)

  • Mandziak, Anna
  • Sosa, V.
  • Nita, Pawel
  • Martín-García, Laura
  • Prieto, J. E.
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Tejera-Centeno, César
  • Gallego, Silvia
  • de la Figuera, Juan
[Description of methods used for collection/generation of data] X-ray absorption spectroscopy and X-ray magnetic circular dichroism in photoemission electron microscopy., We have measured the circular magnetic dichroism in the x-ray absorption at the K-edge of oxygen in microcrystals of different spinel oxides. The microcrystals are islands of micrometric size and nanometric thickness, grown on Ru(0001) substrates using high-temperature oxygen-assisted molecular beam epitaxy. The domains observed in the oxygen K-edge dichroism have the same distribution and orientation as those observed in x-ray magnetic circular dichroism at the L3 edge of the octahedral cations. Integrating the area from a single domain, x-ray magnetic circular dichroic spectra of oxygen were measured and, by the application of the K-edge sum rule, non vanishing orbital magnetic moments aligned with the octahedral cations were found. The work is described in arXiv:2505.24439. The dataset comprises the original raw PEEM data for the XMCD images and the XAS spectra in both the cobalt ferrite and the nickel ferrite. The PEEM images have only been reduced in size by half in each direction to reduce the size (and saved in a single TIFF file for each measurement)., AMADEUS (PID2021-124585NB-C31, PID2021-124585NB-C33), Nanobond (TED2021-130196B-C22, TED2021-130957B-C54)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Magnetic Circular Dichroism at the Oxygen K edge in Microcrystals of Spinels Grown on Ru(0001)

  • Mandziak, Anna
  • Sosa, V.
  • Nita, Pawel
  • Martín-García, Laura
  • Prieto, J. E.
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Tejera-Centeno, César
  • Gallego, Silvia
  • de la Figuera, Juan
We have measured the circular magnetic dichroism in the x-ray absorption at the K-edge of oxygen in microcrystals of different spinel oxides. The microcrystals are islands of micrometric size and nanometric thickness, grown on Ru(0001) substrates using high-temperature oxygen-assisted molecular beam epitaxy. The domains observed in the oxygen K-edge dichroism have the same distribution and orientation as those observed in x-ray magnetic circular dichroism at the L edge of the octahedral cations. Integrating the area from a single domain, x-ray magnetic circular dichroic spectra of oxygen were measured and, by the application of the K-edge sum rule, non vanishing orbital magnetic moments aligned with the octahedral cations were found. Density functional theory calculations, which did not show any orbital moment at the oxygen anions, indicate that the energy ranges where oxygen dichroism is observed correspond to those with significant hybridization with the cations d bands. They also show a correlation between the magnitude of the measured value of the oxygen orbital moment and the theoretical one for the cations, and demonstrate that this trend is preserved in the presence of Fe excess in the samples. Our experimental XMCD suggest, following the DFT calculations, that the origin of the oxygen magnetic moment lies in the hybridization of the oxygen unoccupied p-derived bands with the cation bands, mostly with the d-derived ones., This work is supported by the Grants PID2021-124585NB-C31/-C33, PID2021-122980OB-C55, PID2020-117024GB-C43 and TED2021-130957B-C53/-C54 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and by the ”European Union NextGenerationEU/PRTR”. P. N. acknowledges the SciMat Priority Research Area budget under the program Excellence Initiative - Research University at the Jagiellonian University in Krakow - Grant No. 75.1920.2021These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. V.S. acknowledges financial support from PIPF-2023/ECO-30425., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermally driven rock-salt to spinel transition in high-entropy (CoFeMnNiZn)xOy oxides: Effects on magnetic and mechanical properties

  • Kirakosyan, Hasmik
  • Sargsyan, Ani
  • Grigoryan, Yeva
  • Sheardy, Alex T.
  • Manukyan, Khachatur
  • Zakaryan, Marieta
  • Gyulasaryan, Harutyun
  • Quesada, Adrián
  • Granados-Miralles, Cecilia
  • Aydinyan, Sofiya
  • Kharat'yan, Suren
High-entropy (CoFeMnNiZn)<inf>x</inf>O<inf>y</inf> oxides with rock-salt and spinel structures were synthesized by a one-step solution combustion synthesis method employing metal nitrates as oxidizers and glycine as fuel. Two distinct combustion regimes were established by adjusting the fuel-to-oxidizer ratio. Fuel-lean conditions favored the formation of a single-phase rock-salt (CoFeMnNiZn)O, whereas fuel-rich conditions led to the formation of spinel (CoFeMnNiZn)<inf>3</inf>O<inf>4</inf> through the re-oxidation of reduced intermediate phases. Thermal analysis and spark plasma sintering (SPS) revealed a reversible transformation between the rock-salt and spinel structures driven by the redox environment, i.e. oxygen uptake and release processes. SPS enabled densification up to ~97 % of the theoretical density and promoted grain growth while preserving nanoscale crystallinity, which is important for structural reversibility. The structural evolution was tracked using X-ray diffraction, Raman spectroscopy, and electron microscopy. Entropy calculations confirmed the high-entropy character of both phases. The sample retaining partial spinel content showed higher hardness and magnetization, while the fully transformed counterpart exhibited higher coercivity. These insights offer a tunable platform for designing functional high-entropy oxides with broad technological relevance. © 2025 Elsevier B.V., All rights reserved., This work was supported by the Higher Education and Science Committee of Science Ministry of Education, Science, Culture and Sports of the Republic of Armenia (grant numbers 23LCG-2F001, 24FP-2B026), the Estonian Research Council (S. Aydinyan) (grant number PSG220). This work was also supported by the Horizon Europe Project BEETHOVEN, which received funding from the European Union's Horizon Europe research and innovation program under GA No 101129912. KM acknowledges support from the U.S. Army Research Office for grant #W911NF2110045 through the Materials Synthesis & Processing Program, with Dr. Jacob Marx as program manager. We also acknowledge funding from the Spanish Ministerio de Ciencia, Innovación y Universidades through projects PID2021-124585NB-C33, TED2021-130957B-C51, CNS2022-135876 and by “ERDF A way of making Europe”. C.G.-M. acknowledges financial support through grant RYC2021–031181-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU., Appendix A. Supplementary data at DOI: 10.1016/j.cej.2025.168976. Data will be made available on request., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recovery of Rare Earths from End-of-Life NdFeB Permanent Magnets from Wind Turbines

  • Alcaraz, Lorena
  • Rodríguez-Largo, Olga
  • Barquero-Carmona, Gorka
  • Berja, Alba
  • Quesada, Adrián
  • López, Félix A.
This work aims to recover rare earths from wind turbines NdFeB magnets through pyrometallurgical and hydrometallurgical techniques. First, a NdFeB hydride powder is obtained by decrepitation with hydrogen. Subsequently, this powder was subjected to a chlorination roasting process and successive leaching with water to bring the metals into solution. This was followed by a liquid-liquid extraction to remove the iron and purify the rare earth solution. For this purpose, Aliquat 336 diluted in Solvesso was selected as the iron selective extraction agent. As a single extraction was not enough for complete iron removal, a second Fe extraction step was carried out. This second extraction step was performed using the restored organic phase. This restoration was achieved by treating the organic phase with Na<inf>2</inf>SO<inf>3</inf> and then washing it with a 3 M HCl solution. In this way, the process was achieved more sustainably. Finally, the rare earths contained in the final solution were precipitated using oxalic acid to obtain mixed rare earth oxalates. © 2025 Elsevier B.V., All rights reserved., We acknowledge funding from the EIT Raw Materials, co-funded by the European Commission, through Project INSPIRES (20090), from the European Commission through Horizon Europe project BEETHOVEN (101129912) and from the Spanish Ministerio de Ciencia, Innovación y Universidades through projects PID2021-124585NB−C33, PCI2024-153493, TED2021-130957B−C51, CNS2022-135876 and by “ERDF A way of making Europe”. Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or HADEA. Neither the European Union nor the HADEA can be held responsible for them., this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors at DOI: 10.1002/cssc.202402237, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Data for High-Temperature Oxygen-Assisted Molecular Beam Epitaxy of BaWO4 on W(110): Growth Mechanism and Structural Characterization

  • Gutiérrez-Cuesta, Clara
  • Rojo-Silva, V.
  • Prieto, J. E.
  • Mandziak, Anna
  • Nita, Pawel
  • Campo, Adolfo del
  • Kwiatek-Maroszek, Natalia
  • Cojocariu, Iulia
  • Szpytmae, Marcin
  • Fevola, Giovanni
  • Mascaraque, Arantzazu
  • Marco, J.F.
  • Onur Mentes, Tevik
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
1. Description of methods used for collection/generation of data: X-ray absorption spectroscopy and X-ray magnetic circular dichroism in photoemission electron microscopy, low-energy electron microscopy, Raman spectroscopy, Optical microscopy, Atomic Force Microscopy. 2. Methods for processing the data: Intensity extracted from areas of interest from sequence of images at different photon energies, or different start voltage. -- Environmental/experimental conditions: ultra-high-vacuum . -- Number of cases/rows: 3 sample, We study the growth of barium tungstate, BaWO4, by high-temperature oxygen-assisted molecular beam epitaxy on W(110). Barium tungstate grows in the form of isosceles triangular-shaped islands, tens of micrometers wide and tens of nanometers in height. The growth was monitored in real timeby low-energy electron microscopy and characterized in situ by low-energy electron difraction, x-ray absorption and x-ray photoelectron spectroscopies. Further ex situ characterization was performed by optical and atomic force microscopies and Raman spectroscopy. Barium tungstate growth on W(110) was performed by dosing only barium in a molecular oxygen atmosphere due to incorporation of W atoms from the W(110) substrate. The islands correspond to the BaWO4(011) crystallographic orientation and their sides are aligned along the [001] and [111] directions of the BaWO4 crystal., AMADEUS (AEI PID2021-124585NB-C31), AEI PID2021-124585NB-C33, BEETHOVEN (EU 101129912), NEPHEWS (101131414), SERI (22.00187), UKRI (10039728), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Accurate and Fast Thermal Sensing via Phase-Responsive Nanothermometers and Neural Networks

  • París Ogáyar, Marina
  • Ming, Liyan
  • Zhang, Fengchan
  • Ximendes, Erving
  • Marin, Riccardo
  • Lifante-Pedrola, Ginés
  • Serrano Rubio, Aída
  • Espinosa, Ana
  • Haro-González, Patricia
  • Hernando, Jordi
  • Ruiz Molina, Daniel
  • Otaegui, Jaume R.
  • Roscini, Claudio
  • Jaque, Daniel
Accurate, rapid, and remote temperature sensing at the nanoscale is essential for applications ranging from monitoring cellular thermodynamics to thermal management of microelectronic devices. Luminescent nanothermometers are promising candidates; however, their deployment is hindered by limited thermal sensitivity and cross-sensitivity to environmental factors that mimic temperature-induced luminescence changes. We introduce fluorescent chromatic nanoswitchers (CNSs), comprising silica nanocapsules incorporating a fluorescent dye within a thermoresponsive matrix. The matrix undergoes a solid-to-liquid phase transition, yielding an exceptional fluorescence lifetime sensitivity of 19% °C-1 at 37 °C. Crucially, the lifetime-based thermal readout provided by CNSs is resistant to environmental interference, ensuring reliable, reproducible temperature measurements. To enhance CNS performance, we integrate artificial neural networks (ANNs) for advanced lifetime signal processing, enabling faster and robust thermal readouts. Proof-of-concept experiments show that the synergy between high-sensitivity lifetime-based nanothermometers and ANN-driven analysis paves the way for next-generation thermal sensing technologies, offering improved responsiveness, real-time capabilities, and enhanced accuracy., M.P.O. acknowledges the financial support from MICINN for an FPU (FPU20/03166). L.M. acknowledges a scholarship from the China Scholarship Council (202108350018). F.Z. acknowledges a scholarship from the China Scholarship Council (202108440235). E.X. thanks the Community of Madrid for Project SI4/PJI/2024-00130 through a direct grant with Universidad Autónoma de Madrid and also acknowledges support from Grant RYC2023-044309-I, funded by MICIU/AEI (10.13039/501100011033) and the FSE. This work was supported by Grant PID2024-161565OB-C21 funded by MICIU/AEI/10.13039/501100011033/FEDER, UE, and CNS2022-135495 and PID2023-151078OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.501100011033. R.M. is grateful to the Spanish Ministerio de Ciencia, Innovación y Universidades for support to research through a Ramón y Cajal Fellowship (RYC2021-032913-I) and Project PID2022- 14210NA-I00 (NAMASTEPS) funded by MICIU/AEI/10.13039/5011000 11033 and by FEDER, EU. The ICMM-CSIC acknowledges support from the Severo Ochoa Centres of Excellence Program, Grant CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033. The UAB thanks the support from MICIU/AEI/10.13039.501100011033 (PID2022-141293OB-I00) and Generalitat de Catalunya (2021 SGR 00064 project). J.R.O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. A.S. acknowledges financial support from Grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and Project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. A.E. acknowledges financial support from Project PID2024-161273OB-C21 funded by MCIN/AEI/10.13039/501100011033 and CNS2023-144689 funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001445-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comprehensive characterization and structural modelling of lithium ferrites

  • Granados-Miralles, Cecilia
  • Marco, J.F.
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • López-Sánchez, Jesús
  • Castellano-Soria, Alberto
  • Navarro, Elena
  • Marín, Pilar
  • Rubio-Zuazo, J.
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
13 pages, 8 figures, 2 tables, The character and magnitude of the properties of lithium ferrites depend on the specific polymorph stabilized. Reliable polymorph identification and quantitative analysis have been realized by complementary structural characterization techniques (synchrotron X-ray diffraction, 57Fe M¨ossbauer and X-ray absorption spectroscopies), through fitting/modelling of the experimental datasets to appropriate mathematical models. Calculated sample compositions show a maximum offset of 7 wt% between techniques, and cation distribution on the spinel-like LiFe5O8 material has yielded values ranging from 60 to 67 at% Fe3+ in octahedral sites with respect to the total number of Fe3+cations in the spinel phase. Magnetic transition temperatures (i.e., N´eel/Curie) in the order of 91–93 K and 893–898 K have been measured for LiFeO2 and LiFe5O8, respectively. The combined characterization presented here is brought forward as a reliable method to establish the relative concentrations of polymorphs in ferrites, a strategy which can be expanded to other families of Fe-based materials., This work has been supported by grants PID2021–124585NB-C31, PID2021–124585NB-C33, and PID2023–151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, grants TED2021–130957B-C51, CNS2022–135876, RYC2021–031181-I, and RYC2021–031236-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and grants RYC- 2017–23320, and RYC2022–035912-I funded by MICIU/AEI/10.13039/ 501100011033 and by “ESF Investing in your future”. XAS experiments were performed at the BL22-CLÆSS beamline at ALBA Synchrotron with the collaboration of ALBA staff (experiment n. 2022025654). The MICIU, and CSIC are acknowledged for provision of synchrotron radiation facilities at BM25-SpLine and for financial support through the projects PE-2010 6 0E 013 and PE-2021 60 E 030. The authors sincerely acknowledge the ESRF (France), the MCINN, and the Consejo Superior de Investigaciones Científicas (CSIC, Spain) for their financial and technical support under proposal number A25–02–1009, as well as the BM25-SpLine staff for their assistance in the use of the synchrotron radiation facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic circular dichroism at the oxygen K-edge in microcrystals of spinels grown on Ru(0001)

  • Mandziak, Anna
  • Sosa, Victor
  • Nita, Pawel
  • Martín-García, Laura
  • Prieto, J. E.
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucia
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Tejera-Centeno, César
  • Gallego, Silvia
  • de la Figuera, Juan
10 pages, 3 figures, 4 tables, We have measured the circular magnetic dichroism in the x-ray absorption at the K-edge of oxygen in microcrystals of different spinel oxides. The microcrystals are islands of micrometric size and nanometric thickness, grown on Ru(0001) substrates using high-temperature oxygen-assisted molecular beam epitaxy. The domains observed in the oxygen K-edge dichroism have the same distribution and orientation as those observed in x-ray magnetic circular dichroism at the L3edge of the octahedral cations. Integrating the area from a single domain, x-ray magnetic circular dichroic spectra of oxygen were measured and, by the application of the K-edge sum rule, non vanishing orbital magnetic moments aligned with the octahedral cations were found. Density functional theory calculations, which did not show any orbital moment at the oxygen anions, indicate that the energy ranges where oxygen dichroism is observed correspond to those with significant hybridization with the cations d bands. They also show a correlation between the magnitude of the measured value of the oxygen orbital moment and the theoretical one for the cations, and demonstrate that this trend is preserved in the presence of Fe excess in the samples. Our experimental XMCD suggest, following the density functional theory calculations, that the origin of the oxygen magnetic moment lies in the hybridization of the oxygen unoccupied p-derived bands with the cation bands, mostly with the d-derived ones and does not correspond to a localized orbital magnetic moment in the oxygen in spinels., This work is supported by the Grants PID2021124585NB-C31/-C33, PID2021-122980OB-C55, PID2020117024GB-C43 and TED2021-130957B-C53/-C54 funded by MCIN/AEI/10.13039/501100011033 and by ‘ERDF A way of making Europe’ and by the ‘European Union Next Generation EU/PRTR’. P N acknowledges the SciMat Priority Research Area budget under the program Excellence Initiative—Research University at the Jagiellonian University in Craków—Grant No. 75.1920.2021. C G-M acknowledges f inancial support from Grant RYC2021–031181-I funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. V S acknowledges financial support from PIPF2023/ECO-30425., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dual luminescent and magnetic properties in Ti1-xNdxO2-x solid solutions with nanoscaled rutile

  • Colomer, María T.
  • Quesada, Adrián
  • López-Sánchez, Jesús
  • Martínez, Jesús I.
  • Mather, Glenn C.
  • Molina, Pablo
In this work, we have synthesised Ti1-xNdxO2-0.5x solid solutions (0.05 ≤ x ≤ 0.10) by a colloidal sol−gel route followed by calcination at 400, 700 or 900 °C in air for 10 min. Pure rutile solid solutions were obtained when calcined at 900 °C for compositions up to 1 mol% Nd3+. On doping with 2, 3, 5, and 10 mol% Nd3+, the solid solutions are comprised of rutile and Nd4Ti9O24 as second phase according to XRD. In addition, by HREM TiO1.9 Magneli series is also observed as a trace. Photoluminescence (PL) decay curves show a multi−exponential decay behaviour likely attributable to the structural properties of the host matrix and the formation of at least two different microenvironments. Moreover, to the best of our knowledge, it is shown for the first time that, in addition to PL emission, rutile solid solutions with x = 0.03 present ferromagnetic behaviour with a robust magnetic hysteresis. According to the magnetisation measurements, the isolated Nd3+ centres, detected by EPR, are magnetically non−interacting; in addition, Nd4Ti9O24 presents a paramagnetic behaviour. Furthermore, the height of the EPR feature increases for Nd3+ content below 3 mol%, reaches a maximum for this value, and decreases for higher values of Nd3+. In this framework, a plausible explanation is that a non−stoichiometric Nd−Ti−O based phase, undetectable via XRD or Raman but detectable by PL and magnetisation measurements, hosts the magnetic order. These results pave the way for the development of novel optomagnetic multifunctional nanomaterials., This work was supported by the Science and Innovation Ministry (Government of Spain) and FEDER Funds under the Grants n° PID2019−104118RB−C21, and PID2022−140923NB−C21, and also through next generation funds, grants TED2021−130809B−I00 and TED2021–130957B−C51, and CNS2022–135876 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR, and grant PID2021−124585NB−C33 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic growth of ferberite (FeWO4) on W(110) by high-temperature oxygen-assisted molecular beam epitaxy

  • Gutiérrez-Cuesta, Clara
  • del Campo, Adolfo
  • Rojo-Silva, V.
  • Marco, J.F.
  • Cojocariu, Iulia
  • Szpytma, Marcin
  • Fevola, Giovanni
  • Mascaraque, Arantzazu
  • Menteş, Tevfik Onur
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
  • Prieto, J. E.
8 pages, 6 figures, 1 table, We report on the growth of nanowires of ferberite (FeWO<inf>4</inf>) by high-temperature oxygen-assisted molecular beam epitaxy on W(110). This multifunctional material has promising applications in different fields. The wires extend for several millimeters in length, with widths in the hundreds and heights in the tens of nanometers. We have monitored the growth process by real-time low-energy electron microscopy and characterized the wires in-situ by low-energy electron microscopy and laterally-resolved X-ray absorption and photoelectron spectroscopies. Further analysis was performed ex-situ by atomic force and optical microscopies as well as by Raman spectroscopy. The growth of ferberite on W(110) was possible by dosing iron in a molecular oxygen atmosphere likely due to the formation of highly mobile WO<inf>x</inf> units that can be incorporated into the anisotropic wolframite structure, which in turn is responsible for the highly anisotropic growth. We propose that the same method may be used for the growth of other tungstate or related compounds., This work is supported by Grants PID2021-124585NB-C31, PID2021-124585NB-C33, TED2021-130957B-C54 and TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”; by Grant Mag4TIC-CM funded by the TEC-2024/TEC-380 program of the Comunidad de Madrid and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. It is also funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA) or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor EACEA or the granting authorities can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Structural and magnetic properties of Fe11Mn2Ga3: an off-stoichiometric Heusler alloy

  • Morales, Oswaldo
  • Plazaola, Fernando
  • Marco, J.F.
  • Peña, Víctor A.
  • Rojo, Víctor
  • Prieto, J. E.
  • de la Figuera, Juan
  • Dávalos, J.Z.
16 pages, 9 figures, 1 table . -- Conference Proceedings, This work investigates the structural and magnetic properties of the off-stoichiometric Heusler alloy Fe₁₁Mn₂Ga₃. X-ray diffraction confirms a face-centered cubic L2₁ structure with significant chemical disorder. Magnetic characterization reveals a complex phase diagram with two distinct transitions: a Curie temperature at T<inf>m2</inf> =309 K and a magnetic reorientation at T<inf>m1</inf> =167 K, below which antiferromagnetic interactions dominate, evidenced by a reentrant decrease in magnetization. This behavior yields a bifunctional magnetocaloric response, with a direct effect near T<inf>m1</inf> and an inverse effect near T<inf>m2</inf>. Mössbauer spectroscopy confirms a ferrimagnetic state at room temperature and provides microscopic evidence for the development of non-collinear magnetism at low temperatures. The novelty of these results lies in the consequences of the strong Fe-rich off-stoichiometry, which stabilizes chemical disorder and shifts the balance beteween competing ferromagnetic and antiferromagnetic interactions to unusually high temperatures. The results demonstrate that strategic off-stoichiometry is a powerful tool for stabilizing disordered states and engineering novel magnetic functionality in Heusler alloys., This work is supported by grants PID2022-138108OB-C33, PID2021-124585NB-C31 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and “ERDF A way of making Europe”; the Basque Government under grant IT-1500-22; the “Comunidad de Madrid” funded TEC-2024/TEC-380 program under grant Mag4TIC-CM and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA). Neither the European Union nor EACEA or the granting authorities can be held responsible for them. In addition, O.M. thanks Dr. E.M.B. Saitovitch (CNRB-R.J.-Brazil) for the opportunity to research with her group. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-temperature oxygen-assisted molecular beam epitaxy of BaWO4 on W(110): growth mechanism and structural characterization

  • Gutiérrez-Cuesta, Clara
  • Rojo-Silva, V.
  • Prieto, J. E.
  • Mandziak, Anna
  • Nita, Pawel
  • Del Campo, Adolfo
  • Kwiatek-Maroszek, Natalia
  • Cojocariu, Iulia
  • Szpytma, Marcin
  • Fevola, Giovanni
  • Mascaraque, Arantzazu
  • Marco, J.F.
  • Onur Menteş, Tevfik
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
8 pages, 6 figures, 1 table, We have studied the growth of barium tungstate, BaWO4, by high-temperature oxygen-assisted molecular beam epitaxy on W(110). Barium tungstate grows in the form of isosceles triangular-shaped islands, tens of micrometers wide and tens of nanometers in height. The growth was monitored in real time by low-energy electron microscopy and characterized in situ by low-energy electron diffraction, X-ray absorption and X-ray photoelectron spectroscopies. Further ex situ characterization was performed by optical and atomic force microscopies and Raman spectroscopy. Barium tungstate growth on W(110) was performed by dosing only barium in a molecular oxygen atmosphere due to incorporation of W atoms from the W(110) substrate. The islands correspond to the BaWO4 (011) crystallographic orientation and their sides are aligned along the [001] and [11̄1] directions of the BaWO4 crystal., This work was supported by Grants PID2021-124585NB-C31 and PID2021-124585NB-C33, grant Mag4TIC-CM funded by the TEC-2024/TEC-380 program of the Comunidad de Madrid and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. It was also funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA) or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor EACEA or the granting authorities can be held responsible for them. This work has received support from the European Union under the Horizon Europe programme, project NEPHEWS– Neutrons and Photons Elevating Worldwide Science (No. 101131414)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvent-assisted spark plasma sintering of SrFe12O19 permanent magnets

  • Pino-Batlles, Carmen del
  • Rojas-Hernández, Rocío E.
  • Granados-Miralles, Cecilia
  • Berja, Alba
  • Casaleiz, DAniel
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • Serrano Rubio, Aída
The increased demand expected for permanent magnets in the next few years and the need for a more sustainable production in the ceramic industry bring forward the need to develop new and greener processes. Herein, spark plasma sintering is employed to consolidate strontium hexaferrite magnets at lower sintering temperatures by adding a transient solvent, such as glacial acetic acid, to the starting powder. The addition of a solvent activates the onset of mass transport at reduced temperatures, leading to dense pieces with relative densities above 95% at 850 °C, lower than those reported in previous studies. An optimized solvent-assisted spark plasma sintering strategy is established, allowing us to identify the parameter ranges that lead to a trade-off between relative density and coercivity. The results presented unveil that integrating solvent-assisted approaches with advanced sintering techniques can be a powerful pathway for the development of new strategies for production of ceramic permanent magnets., This work was supported by the Spanish Ministry for Science, Innovation and Universities (MICIU) under the projects PID2021- 124585NB-C33 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU and PID2023–151036OA-I00, TED2021-130957B-C51, CNS2022–135876 and CNS2024-154490 funded by MICIU/AEI/ 10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. This work has also been supported by BEETHOVEN project funded by the European Comission under grant agreement 101129912. R.E. R.-H. acknowledges the financial support from the Estonian Research Council (grants PSG-466) and project PID2023-153398OB-I00 funded by MCIU/AEI/10.13039/ 501100011033 and the European Social Fund Plus (ESF+). A.S. and C. G.-M. acknowledge financial support from grant RYC2021–031236-I and RYC2021–031181-I, respectively, funded by MICIU/AEI/10.13039/ 501100011033 and by the “European Union NextGenerationEU/PRTR”., Supplementary data to this article can be found online at https://doi. org/10.1016/j.jmrt.2026.04.255., Peer reviewed, Sin experimentacion animal ni uso de NAMs
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-Operando local structural response of Si-based press-fit PN-junction diodes

  • Román, Sara
  • Moure Arroyo, Alberto
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Campo, Ángel Adolfo del
  • Oujja, Mohamed
  • Calvo, Rodrigo
  • Sánchez-Prieto, Jesús
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
[Data Statement] Data will be made available on request., Understanding the local structural evolution of silicon-based press-fit diodes under real operating conditions is critical for the development of reliable power electronic components. During operation, these diodes are exposed to high electric currents, leading to significant overheating and the generation of interfacial stresses caused by mismatches in the thermal expansion coefficients of the constituent materials in the device. These effects are further influenced by the doping profiles of the semiconductor junctions. In this study, we examine the structural response of single-crystal silicon in commercial press-fit power diodes both under room conditions (room temperature and no applied current) as well as under real current-driven operating conditions, focusing on localized regions defined by the doping profiles of three different PN-junction-based devices. The presence of dopants, along with the current-induced strain and thermal effects in the silicon lattice, leads to structural changes that directly impact device performance. By employing advanced in-operando characterization techniques, we resolve, for the first time, localized interfacial and region-dependent structural phenomena within operating press-fit diodes and establish direct correlations between lattice distortions, interfacial behavior, and doping concentration. These results provide new insights into the microscopic mechanisms governing reliability and degradation in high-power silicon devices under realistic working conditions., This work was supported by the Consejo Superior de Investigaciones Científicas (CSIC) under project AFICHES (No. 202460E101). S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +). A.S. acknowledges the financial support from Spanish Ministry for Science and Innovation (MCIN) for a Ramón y Cajal contract (No. RYC2021-031236-I) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. The authors acknowledge the support from the ‘Centro de Microanalisis de Materiales (CMAM)—Universidad Autonoma de Madrid’, for the beam time proposals with codes IMP019/22 and IMP013/23; and its technical staff for their contribution to the operation of the accelerator. We thank Gastón García and José Olivares for helpful discussions and reading of the manuscript. The authors also acknowledge the European Synchrotron Radiation Facility (ESRF), the MCIN and the CSIC for provision of synchrotron radiation facilities under proposal numbers A25-02-940, A25-02-997, A25-02-1030, MA-5391 and A25-02-1074, as well as for the funding through the projects PIE-2010-6-0E-013 and PIE-2021-60-E-030. We would like to thank technical staff for their assistance and support in using beamline BM25-SpLine., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dual luminescent and magnetic properties in Ti1-xNdxO2-δ solid solutions with nanoscaled rutile

  • Colomer, María T.
  • Quesada, A.
  • López-Sánchez, J.
  • Martínez Martínez, Jesús Ignacio
  • Mather, G.C.
  • Molina, P.
In this work, we have synthesised Ti1-xNdxO2-0.5x solid solutions (0.05 ≤ x ≤ 0.10) by a colloidal sol−gel route followed by calcination at 400, 700 or 900 °C in air for 10 min. Pure rutile solid solutions were obtained when calcined at 900 °C for compositions up to 1 mol% Nd3+. On doping with 2, 3, 5, and 10 mol% Nd3+, the solid solutions are comprised of rutile and Nd4Ti9O24 as second phase according to XRD. In addition, by HREM TiO1.9 Magneli series is also observed as a trace. Photoluminescence (PL) decay curves show a multi−exponential decay behaviour likely attributable to the structural properties of the host matrix and the formation of at least two different microenvironments. Moreover, to the best of our knowledge, it is shown for the first time that, in addition to PL emission, rutile solid solutions with x = 0.03 present ferromagnetic behaviour with a robust magnetic hysteresis. According to the magnetisation measurements, the isolated Nd3+ centres, detected by EPR, are magnetically non−interacting; in addition, Nd4Ti9O24 presents a paramagnetic behaviour. Furthermore, the height of the EPR feature increases for Nd3+ content below 3 mol%, reaches a maximum for this value, and decreases for higher values of Nd3+. In this framework, a plausible explanation is that a non−stoichiometric Nd−Ti−O based phase, undetectable via XRD or Raman but detectable by PL and magnetisation measurements, hosts the magnetic order. These results pave the way for the development of novel optomagnetic multifunctional nanomaterials.
Docta Complutense
Publication Artículo científico (JournalArticle)

Apparent color and Raman vibrational modes of the high-temperature superconductor Bi2Sr2CaCu2O8+δ exfoliated flakes

  • Figueruelo-Campanero, Ignacio
  • Campo, Adolfo del
  • Nieva, Gladys
  • González Herrera, Elvira María
  • Serrano, Aida
  • Menghini, Mariela
Studying and controlling the properties of individual exfoliated materials is one of the first steps towards the fabrication of complex van der Waals systems. In this work, we present a systematic study of optical properties and micro-Raman spectroscopy on exfoliated flakes of the high-temperature superconductor Bi2Sr2CaCu2O8+δ (BSCCO-2212). We demonstrate that these are quick and non-invasive techniques for studying air sensitive materials. The apparent color of BSCCO-2212 exfoliated flakes on SiO2/Si has allowed a rough and fast identification of the number of layers. By analyzing the optical contrast of different flakes we determined the complex refractive index in the visible range and found the optimal combination of illumination wavelength and substrate properties for the identification of flakes with different thickness. In addition, we report the hardening of the most characteristic Raman modes as flake thickness decreases, possibly causedby strain in the BiO and CuO2 planes. Moreover, the evolution of the Raman modes establishes a second approach to determine the thickness of BSCCO-2212 thin flakes. As BSCCO-2212 is a challenging material due to its sensitivity to ambient conditions, the present work provides a guide for the fabrication and characterization of complex van der Waals systems paving the way for studying heterostructures based on unconventional superconductors in the 2D limit.