Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication
Artículo científico (JournalArticle)
Study of the optimal deposition conditions of Ag(O2) and Ag(N2) seed layers on ultrathin silver transparent conductive films
In this study, ultrathin Ag layers were analyzed for their use as conductive films, which were fabricated via magnetron sputtering on a glass substrate and protected with aluminum-doped zinc oxide (AZO). These layers were obtained using seed layers made of silver deposited by adding small amounts of oxygen or nitrogen prior to the deposition of the metallic silver layer. This study aimed to determine the optimal amount of gas needed to maximize the conductivity and transparency properties of the conductive films with varied silver thicknesses. The optimal characteristics of the studied samples were verified using spectrophotometric, sheet resistance measurements, and surface morphology techniques. It was concluded that a smaller amount of silver required a higher amount of gas to be introduced into the seed layer. Besides, to fabricate an optimal conductive film, it is necessary to deposit 5.9 or 5.2 nm of silver with a seed layer obtained with a O2 partial pressure of 1.7 × 10−4 mbar, or 5.2 or 4.7 nm of silver with a seed layer obtained using a N2 partial pressure of 4.2 × 10−4 mbar. These samples provide sheet resistance values between 13.0 Ω/sq and 17.6 Ω/sq and transmission between 86.2 % and 87.3 % at 550 nm.