Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Terahertz frequency-scaled differential imaging for Sub-6 GHz vehicular antenna signature analysis

  • Solano Pérez, José Antonio
  • Martínez Inglés, María Teresa
  • Molina García-Pardo, José María
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
  • Ballesteros Sánchez, Christian
  • Rodríguez Rodríguez, José Víctor
  • Mateo Aroca, Antonio
The next generation of connected and autonomous vehicles will be equipped with high numbers of antennas operating in a wide frequency range for communications and environment sensing. The study of 3D spatial angular responses and the radiation patterns modified by vehicular structure will allow for better integration of the associated communication and sensing antennas. The use of near-field monostatic focusing, applied with frequency-dimension scale translation and differential imaging, offers a novel imaging application. The objective of this paper is to theoretically and experimentally study the method of obtaining currents produced by an antenna radiating on top of a vehicular platform using differential imaging. The experimental part of the study focuses on measuring a scaled target using an imaging system operating in a terahertz band—from 220 to 330 GHz—that matches a 5G frequency band according to frequency-dimension scale translation. The results show that the induced currents are properly estimated using this methodology, and that the influence of the bandwidth is assessed., This research was funded by the Ministry of Education and Science, Spain (PID2019-107885GB-C33/AEI/10.13039/501100011033, TEC2016-78028-C3-1-P, TEC2016-78028-C3-2-P and TEC2016-78028-C3-3-P, MDM2016-O6OO), Catalan Research Group 2017 SGR 219, and the European FEDER funds.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Acceleration of Born series by change of variables

  • López Menchón, Héctor
  • Rius Casals, Juan Manuel
  • Heldring, Alexander
  • Úbeda Farré, Eduard
In this work, we propose a method to enhance the convergence of the Born series. The Born series is widely used in scattering theory, but its convergence is only guaranteed under certain restrictive conditions which limit the cases where this formulation can be applied. The proposed method, based on modifying the singularities of the resolvent operator by a change of variables, accelerates the convergence of the series or even achieves convergence in otherwise divergent cases. Due to its low computational cost and ease of implementation, the method preserves the advantages of the Born series while it extends its range of application. It can also be applied to a variety of methods relying on the same mathematical principles as the Born series. Numerical examples are provided to show that a significant improvement can be achieved with simple techniques and with a limited knowledge about the operator spectrum., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, MDM2016-0600, TEC2017-83343-C4-2-R, TEC2017-84817-C2-2-R, PID 2019-107885GB-C31 and Catalan Research Group 2017 SGR 219; and by Secretary of Universities and Research of the Ministry of Business and Knowledge of the Generalitat of Catalonia and European Social Fund under scholarship 2019 FI B00788., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On differential imaging using electromagnetic simulation for vehicular antenna signature analysis

  • Solano Pérez, José Antonio
  • Martinez Ingles, Maria Teresa
  • Molina García-Pardo, José María
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
  • Ballesteros Sánchez, Christian
  • Rodríguez Rodríguez, José Víctor
  • Mateo Aroca, Antonio
  • Guzmán Quirós, Raúl
The current trend in vehicles is to integrate a wide number of antennae and sensors operating at a variety of frequencies for sensing and communications. The integration of these antennae and sensors in the vehicle platform is complex because of the way in which the antenna radiation patterns interact with the vehicle structure and other antennae/sensors. Consequently, there is a need to study the radiation pattern of each antenna or, alternatively, the currents induced on the surface of the vehicle to optimize the integration of multiple antennae. The novel concept of differential imaging represents one method by which it is possible to obtain the surface current distribution without introducing any perturbing probe. The aim of this study was to develop and confirm the assumptions that underpin differential imaging by means of full-wave electromagnetic simulation, thereby providing additional verification of the concept. The simulation environment and parameters were selected to replicate the conditions in which real measurements were taken in previous studies. The simulations were performed using Ansys HFSS simulation software. The results confirm that the approximations are valid, and the differential currents are representative of the induced surface currents generated by a monopole positioned on the top of a vehicle., This research was funded by the Ministry of Education and Science, Spain (PID2019-107885GB-C33 / Agencia Estatal de Investigación AEI / 10.13039/501100011033), and the Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reconfigurable dual-polarized beam-steering broadband antenna using a crossed-strips geometry

  • Ramírez Arroyave, Germán Augusto
  • Zhou, Ivan
  • Blanch Boris, Sebastián
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this letter, a reconfigurable dual-polarized broadband antenna with beam-steering capabilities using a parasitic layer is proposed for 5G new radio (NR) frequency range 1 (FR-1) applications. The antenna is a dual-port aperture-stacked patch structure with symmetrical orthogonal (horizontal and vertical) currents. The beam-steering is achieved by a pair of reconfigurable cross-shaped parasitic strips, which bestow the antenna three main beam directions θ = { ~ -25 ° ,0 ° , ~ 25 ° }, Ψ = {0 ° } with pointing and gain (7 dB) stability across a 30% impedance bandwidth (S 11 , S 22 <; -10 dB) from 3.2 - 4.3 GHz for both ports/polarizations. A prototype of the antenna is manufactured and measured demonstrating results in accordance with simulation expectations., This work was supported in part by Colombian “Departamento Administrativo de Ciencia, Tecnología e Innovación” Colciencias through convocatoria 727 of 2015 scholarship, and in part by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under Projects TEC2013-47360-C3-1-P/AEI/10.13039/501100011033, TEC2016-78028-C3- 1-P/AEI/10.13039/501100011033, and MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving the accuracy of the adaptive cross approximation with a convergence criterion based on random sampling

  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The accuracy of the Adaptive Cross Approximation (ACA) algorithm, a popular method for the compression of low rank matrix blocks in Method of Moment computations, is sometimes seriously compromised by unpredictable errors in the convergence criterion. This paper proposes an alternative criterion, based on global sampling of the error in the elements of the ACA compressed matrix. The sampling error depends on the size of the sample but also on the population distribution of the error, which makes it difficult to control the error independently of the underlying problem. However, as argued and demonstrated in the paper, the distribution of the error converges to the same unique probability distribution function for all low rank matrices. Complementing the sampling criterion with a simple mechanism to detect this convergence, we arrive at a criterion that controls the error irrespective of the underlying problem. As a practical example the RCS of a moderate size metallic ogive is computed to illustrate the merits of the proposed criterion. The proposed algorithm may also be useful in other methods that approximate low-rank matrices by interpolation of a reduced set of its elements., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, TEC2017-84817-C2-2-R, TEC2017-83343-C4-2-R, PID 2019-107885GBC31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Technology assessment of aperture coupled slot antenna array in Groove Gapwaveguide for 5G millimeter wave applications

  • Zhou, Ivan
  • Jofre Roca, Lluís
  • Romeu Robert, Jordi
A compact triple-layer series fed slot unit array using Groove Gap Waveguide (GGW) technology for 5G millimeter-wave applications is presented in this paper. The design employed a two-step coupling mechanism for the radiating slots. The aperture coupling design when combined with the groove gapWaveguide (GGW) technology allows achieving three different goals: First, a reduction of the array size in the transversal direction, so more unit arrays can be added without grating lobes. Secondly, low insertion losses with high radiation efficiency. And third, a reduction of the manufacturing complexity with good stability against fabrication tolerances of up to 0.1 mm, making the design feasible to be massively deployed. The antenna was fabricated and measured showing good agreement with the numerical simulation results, the antenna provides a peak realized gain of 12.15dB at the central frequency of operation and a fractional bandwidth (FBW) of 9%., This work was supported in part by the Agencia Estatal Investigación under Grant PID2019-107885GB-C31/AEI/10.13039; and in part by the Catalan Research Group under Grant 2017SGR219, Grant MDM2016-O6OO, and Grant DI2020-043., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nested fast adaptive cross approximation algorithm for solving electromagnetic scattering problems

  • Fang, Xiaoxing
  • Heldring, Alexander
  • Rius Casals, Juan Manuel
  • Chen, Xinlei
  • Cao, Qunsheng
In this paper, a Nested Fast Adaptive Cross Approximation (NFACA) algorithm is presented to accelerate the solution of electromagnetic scattering problems. It is based on the Fast Adaptive Cross Approximation (FACA) and the Nested Cross Approximation (NCA). In the NFACA, the FACA is applied instead of the ACA or the Chebyshev nodes, to enhance the efficiency. It is shown to have O(N) storage and computational complexity for electrically small problems. Different from the conventional NCA or the Fast Nested Cross Approximation (FNCA), the pivot-selection does not rely on a preliminary selection with Chebyshev nodes or ACA for each group. The NFACA permits the selection of the optimum pivots independently at each level to make the accuracy controllable. Numerical results of several objects are presented to demonstrate the performance of this method. Compared with the FACA and NCA in solving the electromagnetic scattering problems, the NFACA is more efficient both in computational cost and storage. Compared with the FNCA, the NFACA is both faster and more accurate., This work was supported in part by the National Nature Science Foundation of China under Grant 61871219, Grant 61771238, and Grant 61501227; in part by the Post-Graduate Research and Practice Innovation Program of Jiangsu Province under Grant KYCX18_0289; in part by the China Scholarship Council under Grant 201906830042; in part by the Spanish Ministerio de Ciencia e Innovacion (MICINN) under Project TEC2016-78028-C3-1-P, Project PID 2019-107885GB-C31, Project TEC2017-83343-C4-2-R, and Project MDM2016-0600; and in part by the Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)