Pasar al contenido principal

OBTENCION DE BIOCOMBUSTIBLES CON PROPIEDADES MEJORADAS MEDIANTE LA UTILIZACION DE SISTEMAS CATALITICOS AVANZADOS BASADOS EN NANOMATERIALES DE CARBONO

ENE2014-52189-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards a sustainable bio-fuels production from lignocellulosic bio-oils: Influence of operating conditions on the hydrodeoxygenation of guaiacol over a Mo2C/CNF catalyst

  • Remón, Javier
  • Ochoa, Elba
  • Foguet, Carlos
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
5 Figuras.- Tablas suplementarias disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work firstly provides a thorough insight into the effects of the operating conditions (catalyst loading, initial H2 pressure temperature, reaction time, H2/guaiacol ratio and liquid reaction volume) on the hydrodeoxygenation (HDO) of guaiacol over a Mo2C/CNF catalyst. Under the operating condition tested, gas and solid formation was negligible and guaiacol was primary converted to different liquid products, including non-deoxygenated (0-oxy), mono-deoxygenated (1-oxy) and fully deoxygenated (2-oxy) compounds, together with high molecular weight soluble oligomers. An increase in the catalyst loading increased the guaiacol conversion and HDO efficiency, augmenting the proportions of HDO products. Among these species, the progressive transformation of 1-oxy compounds into 2-oxy species was kinetically and thermodynamically controlled by the catalyst loading and the amount of H2 dissolved in the liquid medium, respectively. Augmenting the H2 pressure increased the H2 availability in the liquid, which led to increases over time in the guaiacol conversion and HDO efficiency, thus promoting the production of HDO products and facilitating the transformation of guaiacol into fully de-oxygenated products. This increase depended on the reaction volume, with more pronounced variations occurring for a small than for a large volume due to the greater variations occurring in the H2/guaiacol ratio for the former than the latter. The temperature exerted a kinetic promoting effect together with a thermodynamic inhibitory influence, as some of the reactions involved were not thermodynamically favoured at high temperature. Therefore, the detailed analysis included in this work brings novel information on guaiacol HDO, which can help to establish the basis for catalysts development and reactors design to achieve a sustainable bio-fuels production from lignocellulosic bio-oils., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of the aforementioned project. In addition, Javier Remón Núñez would like to express his gratitude to the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” for the Juan de la Cierva fellowship (FJCI-2016-30847) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and stability of counter electrodes based on reduced few-layer graphene oxide sheets and reduced graphene oxide quantum dots for dye-sensitized solar cells

  • Torres Gamarra, Daniel
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
9 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Graphene-based materials represent an attractive alternative to platinum in dye-sensitized solar cells (DSSC) counter electrodes to contribute to an efficient conversion of solar energy into electricity. Despite the slower kinetics of carbon for the reduction of triiodide compared to platinum, they are characterized by low cost and promising stability. In this work, two different materials are investigated: reduced few-layer graphene oxide (rFLGO) and reduced graphene oxide quantum dots (rGOQD). The electrochemical performance of DSSC assembled with either rFLGO or rGOQD at the counter electrode is correlated to their most important physico-chemical features. The domain size of graphene sheets had an important effect on the performance at the counter electrode, with quantum dots performing 13% higher efficiency than rFLGO, correlated with a higher density of active sites. Both graphene nanostructures exhibited a better stability behavior upon electrochemical cycling and seasoning of the cells as compared to Pt counter electrode., ICB-CSIC authors acknowledge the Raw Materials Network of Infrastructure “ITO substitution in opto-electronic devices” (European Union), and the funding of the FEDER and the Spanish Science, Innovation and Universities Ministry (MICINN) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). JLP and DS thank MICINN for their Ramón y Cajal research contracts (RyC-2013-12494 and RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibres

  • Remón, Javier
  • Arauzo, J.
  • García Nieto, Lucía
  • Arcelus-Arrillaga, Pedro
  • Millan, Marcos
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
6 Figures, 9 Tables.-- © 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work addresses the preparation, characterisation and screening of different Ni-Co catalysts supported on carbon nanofibres (CNFs) for use in the upgrading of bio-oil in supercritical water. The aim is to improve the physicochemical properties of bio-oil so that it can be used as a fuel. The CNFs were firstly oxidised in HNO3 and afterwards subjected to a thermal treatment to selectively modify their surface chemistry prior to the incorporation of the metal active phase (Ni-Co). The CNFs and the supported catalysts were thoroughly characterised by several techniques, which allowed a relationship to be established between the catalyst properties and the upgrading results. The use of Ni-Co/CNFs for bio-oil upgrading in supercritical water (SCW) significantly improved the properties of the original feedstock. In addition, the thermal treatment to which the fibres were subjected exerted a significant influence on their catalytic properties. An increase in the severity of the thermal treatment led to a substantial reduction in the oxygen content of the CNFs, mainly due to the removal of the less stable oxygen surface groups, which allowed their surface polarity to decrease. This decrease resulted in less formation of solid products. However, it also reduced the H/C and increased the O/C ratios of the upgraded liquid. Therefore, a compromise between the yield and the properties of the upgraded bio-oil was achieved with a Ni-Co supported on a CNF with a moderate amount of oxygen surface groups., The authors wish to express their gratitude to the Aragon Government (GPT group), the European Social Fund and the Spanish MINECO (projects ENE2010-18985, ENE 2011-28318, ENE2013-41523-R and ENE2014-52189-C2-1-R) for providing financial support. Javier Remón Núñez would like to express his gratitude to the Spanish MINECO for the FPI (BES-2011-044856) and mobility (EEBB-I-14-08688) grants awarded. Jose Luis Pinilla thanks the Spanish MINECO for his Ramon y Cajal research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt doping of α-Fe/Al2O3 catalysts for the production of hydrogen and high-quality carbon nanotubes by thermal decomposition of methane

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
10 figures, 4 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Fe–Co/Al2O3 catalysts were developed and tested in the catalytic decomposition of methane (CDM) for the synthesis of multi-wall carbon nanotubes (MWCNT) and the CO2-free hydrogen production. While Fe (54.5–66.7 mol.%) is the main active phase for the carbon formation on the catalyst, Co acts as dopant aiming to improve its overall catalytic behaviour. Catalysts with Co contents of up to 18.2 M% showed the presence of α-Fe and Fe–Co crystallites with different size and lattice parameter. Fe1-xCox alloy with bcc crystal system was identified only for Co contents of 14.0% and above, and presented a lattice constant lower than α-Fe, which would modify the carbon diffusion of the metal particle during the MWCNT growth. Co inhibited the Fe3C formation during CDM resulting in higher carbon formations and longer activity times. This phase, shown in undoped catalysts, favored the presence of bamboo-type carbon nanotubes., This work was funded by the European Regional Development Fund (ERDF) and the Spanish Economy and Competitiveness Ministry (ENE2014-52189-C02-01-R and ENE2017-83854-R). DT thanks for his research contract under the frame of ENE2014-52189-C02-01-R project., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibres

  • Remón, J.
  • Arauzo, J.
  • García, L.
  • Arcelus-Arrillaga, P.
  • Millan, M.
  • Suelves, I.
  • Pinilla, J. L.
This work addresses the preparation, characterisation and screening of different Ni-Co catalysts supported on carbon nanofibres (CNFs) for use in the upgrading of bio-oil in supercritical water. The aim is to improve the physicochemical properties of bio-oil so that it can be used as a fuel. The CNFs were firstly oxidised in HNO3 and afterwards subjected to a thermal treatment to selectively modify their surface chemistry prior to the incorporation of the metal active phase (Ni-Co). The CNFs and the supported catalysts were thoroughly characterised by several techniques, which allowed a relationship to be established between the catalyst properties and the upgrading results. The use of Ni-Co/CNFs for bio-oil upgrading in supercritical water (SCW) significantly improved the properties of the original feedstock. In addition, the thermal treatment to which the fibres were subjected exerted a significant influence on their catalytic properties. An increase in the severity of the thermal treatment led to a substantial reduction in the oxygen content of the CNFs, mainly due to the removal of the less stable oxygen surface groups, which allowed their surface polarity to decrease. This decrease resulted in less formation of solid products. However, it also reduced the H/C and increased the O/C ratios of the upgraded liquid. Therefore, a compromise between the yield and the properties of the upgraded bio-oil was achieved with a Ni-Co supported on a CNF with a moderate amount of oxygen surface groups.