Pasar al contenido principal

GRAFENO EN CELULAS SOLARES PEROVSKITAS Y ORGANICAS: TINTAS E INTERFACES DE GRAFENO

ENE2016-79282-C5-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 59
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH···O=C hydrogen bonds and removal of chemisorbed water

  • Núñez, Jesús David
  • Benito, Ana M.
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
  • Maser, Wolfgang K.
6 Figuras, Owing to their great interest for energy storage and sensing applications, multi-layer papers consisting of graphene oxide – carbon nanotube (GO-CNT) hybrid sheets were prepared by in-situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. water molecules inherently bound to oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH···O=C hydrogen bonds between the carboxylic groups of oCNTs and OFGs of GO. At oCNT contents of about 10 to 15 wt. % this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. Thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices., JDN is thankful for his CSIC PhD grant JAEPre09-01155 covering also his research stay at Rice University. WKM and AMB acknowledge financial support from Spanish MINECO and the European Regional Development Fund through project grants ENE2013-48816-C5-5-R, ENE2016-79282-C5-1-R and the Government of Aragon and the European Social Fund under project DGA-FSE-T66 CNN. RA gratefully acknowledges the support from MINECO through project grants FIS2013-46159- C3-3-P and MAT2016-79776-P. Some of the research has received funding from the European Union FP7 program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship, and H2020 Marie Skłodowska-Curie grant 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembled core-shell CdTe/Poly(3-hexylthiophene) nanoensembles as novel donor−acceptor light-harvesting systems

  • Istif, Emin
  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Stergiou, Anastasios
  • Skaltsas, Theodosis
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
The self-assembly of novel core-shell nanoensembles consisting of regioregular poly(3-hexylthiophene) nanoparticles (P3HTNPs) of 100 nm as core and semiconducting CdTe quantum dots (CdTeQDs) as shell with a thickness of a few tens of nanometres was accomplished by employing a re-precipitation approach. The structure, morphology and composition of CdTeQDs/P3HTNPs nanoensembles were confirmed by high-resolution scanning transmission microscopy and dynamic light scattering studies. Intimate interface contact between the CdTeQDs shell and the P3HTNPs core leads to the stabilization of the CdTeQDs/P3HTNPs nanoensemble as probed by steady-state absorption spectroscopy. Effective quenching of the characteristic photoluminescence of CdTeQDs at 555 nm, accompanied by simultaneous increase of emission of P3HTNPs at 660 and 720 nm, reveals photoinduced charge-transfer processes. Probing the redox properties of films of CdTeQDs/P3HTNPs further proves the formation of a stabilized core-shell system in the solid-state. Photoelectrochemical assays on CdTeQDs/P3HTNPs films show a reversible on-off photoresponse at a bias voltage of +0.8 V with a three times increased photocurrent compared to CdTeQDs. The improved charge separation is directly related to the unique core-shell configuration, in which the outer CdTeQDs shell forces the P3HTNPs core to effectively act as electron acceptor. The creation of novel donor-acceptor core-shell hybrid materials via self-assembly is transferable to other types of conjugated polymers and semiconducting nanoparticles. This work, therefore, opens new pathways for the design of improved optoelectronic devices., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. AMB and WKM gratefully acknowledge financial support from Spanish MINECO under project ENE206-79282-C5-1-R and its associated European Regional Development Fund, as well as the Government of Aragon under project DGA-T66 and associated European Social Fund. RA gratefully acknowledges financial support from Spanish MINECO under project MAT2016 79776-P and its associated European Regional Development Fund, as well as the Government of Aragon under project DGA-E26 and associated European Social Fund. The STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon Universidad de Zaragoza, Spain. The authors would like to thank Esteban Urriolabeitía for carrying out the NMR studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
  • Maser, Wolfgang K.
The game-changing role of graphene oxide (GO) in tuning the excitonic behavior of conjugated polymer nanoparticles is described for the first time. This is demonstrated by using poly(3-hexylthiophene) (P3HT) as a benchmark conjugated polymer and employing an in-situ re-precipitation approach resulting in P3HT nanoparticles (P3HTNPs) with sizes of 50 - 100 nm in intimate contact with GO. During the self-assembly process, GO changes the crystalline packing of P3HT chains in the forming P3HTNPs from H to H/J aggregates exhibiting exciton coupling constants as low as 2 meV, indicating favorable charge separation along the P3HT chains. Concomitantly, π-π interface interactions between the P3HTNPs and GO sheets are established resulting in the creation of P3HTNPs-GO charge-transfer complexes whose energy bandgaps are lowered by up to 0.5 eV. Moreover, their optoelectronic properties, pre-established in the liquid phase, are retained when processed into thin films from the stable aqueous dispersions, thus eliminating the critical dependency on external processing parameters. These results can be transferred to other types of conjugated polymers. Combined with the possibility of employing water based “green” processing technologies, charge-transfer complexes of conjugated polymer nanoparticles and GO open new pathways for the fabrication of improved optoelectronic thin film devices., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742. AMB, and WKM acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frictional and mechanical behaviour of graphene/UHMWPE composite coatings

  • Chih, A.
  • Ansón-Casaos, Alejandro
  • Puértolas, J. A.
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Bulk-modified ultra-high molecular weight polyethylene (UHMWPE) is a biomaterial currently used for joint replacements. As an alternative, we assess the frictional behaviour of coatings based on graphene/UHMWPE composites and sprayed graphene, which maintain the high performance of the UHMWPE matrix. Composite coatings were prepared with 0–4.6 wt% of graphene nanoplatelets (GNP) and 1–2 layered graphene (2LG). Mechanical properties of the coatings were measured by nanoidentation and friction coefficients were determined with a ball-on-disk tribometer. The results indicate that GNP present better tribological behaviour than 2LG. Spray-coated GNP shows the lowest friction, 40% less than UHMWPE, although with low adhesion. An increase of 10% in elastic modulus and 30% in hardness was measured for composite coatings with 2–5 wt% graphene., Special thanks are directed to the Analysis Service of Instituto de Carboquímica, ICB-CSIC, in particular to M.D. Domínguez, N. Fernández and I. Fernández. This work has been funde(2016–79282-d by MINECO and European Regional Development Fund C5-1ENE -R), and Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric behavior and electrical conductivity of PVDF filled with functionalized single-walled carbon nanotubes

  • Puértolas, J. A.
  • García-García, J. F.
  • Pascual, F. Javier
  • González Domínguez, José Miguel
  • Martínez Fernández de Landa, María Teresa
  • Ansón-Casaos, Alejandro
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Polyvinylidene fluoride (PVDF)/single-walled carbon nanotube (SWCNT) composites are characterized by X-ray diffraction and scanning calorimetry, and studied by dielectric relaxation spectroscopy (DRS) in the temperature range of −75 to 150 °C. The effects of SWCNTs and SWCNT functionalization are analyzed in terms of α and αc relaxation, dielectric permittivity, loss tangent, and AC electrical conductivity. Some small changes are detected in α relaxation with the addition of SWCNTs, and a strong influence of SWCNTs is observed in the other relaxation αc. Below the percolation threshold, the dielectric permittivity of functionalized SWCNT composites increases compared to blank PVDF, without notable changes in the dielectric loss. All the composite systems show an electrical percolation behavior with different thresholds depending on SWCNT functionalization. Threshold concentrations remain nearly unchanged in the whole temperature and frequency ranges. The base PVDF conductivity strongly depends on temperature and frequency, while the maximum conductivity above the percolation remains nearly unchanged (∼10−2 S/m) for all the systems, temperatures and frequencies., Special thanks are directed to the Analysis Service of Instituto de Carboquímica, ICB-CSIC, in particular to I. Fernández. This work has been funded by MINECO and European Regional Development Fund (ENE-2016-79282-C5-1-R), and Government of Aragon and European Social Fund (DGA-T50 and DGA-ESF-T66 “Grupos Consolidados”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron trap states and photopotential of nanocrystalline titanium dioxide electrodes filled with single-walled carbon nanotubes

  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Rubio-Muñoz, Cristina
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Hybrid film electrodes were made of nanocrystalline titanium dioxide (TiO2) and various percentages of single‐walled carbon nanotube (SWCNT) fillers up to 5.5 wt%. A complete photoelectrochemical study was performed in both alkaline and acidic conditions by using cyclic voltammetry, potentiostatic photocurrent measurements, and open‐circuit‐potential measurements under UV/Vis irradiation. Dark voltammograms show a transition from a capacitive to a resistive behavior in the TiO2 accumulation region upon increasing SWCNT percentages. In addition, the energy levels of deep electron traps change inside the TiO2 bandgap. The new peak positions correspond to the reduction potentials of SWCNTs, and their associated charge capacities increase with the SWCNT percentage. The modifications observed in dark experiments directly impact on the shape profile of cyclic voltammograms under irradiation. As a consequence, reduction potentials of SWCNTs appear near the cathodic peaks of certain water oxidation intermediates, and may be interacting with them. On the other hand, open‐circuit photopotentials reach maximum values for small SWCNTs percentages around 0.02 wt%. An increase in potentiodynamic and potentiostatic photocurrents is observed for the electrode containing 0.02 wt% SWCNTs, compared to reference TiO2 in acidic conditions., The authors thank the Institute for Biocomputation and Physics of Complex Systems (BIFI) for the centrifugation laboratory. This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”) and European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the hydration mechanism in a multi-layered graphene oxide paper by in-situ X-ray scattering

  • Rouzière, Stéphan
  • Launois, Pascale
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Paineau, Erwan
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Hydration of a multi-layered graphene oxide (GO) paper in water vapor atmosphere was studied by in-situ X-ray scattering over a wide range of relative humidity (RH). The intercalation of water molecules physically adsorbed between GO layers induces the expansion of the interlayer distance. Two regimes of adsorption are clearly evidenced according to the variation of the interlayer distance as a function of the relative humidity. The expansion of the interlayer distance is limited to ∼1 Å for RH ranging from 6 to 53%, whereas it is ∼3.5 Å for RH 75–100%. The hydration mechanism corresponds to the progressive adsorption of water molecules onto hydrophilic sites at the surface of GO layers in the low-RH regime, then an additional water monolayer is formed in the high-RH regime., EP, SR and PL benefited of a grant from the French Research National Agency under the program Investissements d’Avenir (SEDECO project, ANR-10-LABX-0035: Labex NanoSaclay). AMB and WKM acknowledge funding from the Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido TO3_17R) and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supramolecular-enhanced charge-transfer within entangled polyamide chains as the origin of the universal blue fluorescence of polymer carbon dots

  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Ruipérez, Fernando
  • Matxain, Jon M.
  • Canton-Vitoria, Rubén
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
The emission of a bright blue fluorescence is a unique feature common to the vast variety of polymer carbon dots (CDs) prepared from carboxylic acid and amine precursors. However, the difficulty to assign a precise chemical structure to this class of CDs yet hampers the comprehension of their underlying luminescence principle. In this work, we show that highly blue fluorescent model types of CDs can be prepared from citric acid and ethylenediamine through low temperature synthesis routes. Facilitating controlled polycondensation processes, the CDs reveal sizes of 1 - 1.5 nm formed by a compact network of short polyamide chains of about ten monomer units. Density functional theory calculations of these model CDs uncover the existence of spatially separated highest occupied molecular orbital and lowest unoccupied molecular orbital located at the amide and carboxylic groups, respectively. Photoinduced charge-transfer between these groups thus constitutes the origin of the strong blue fluorescence emission. Hydrogen-bond mediated supramolecular interactions between the polyamide chains enabling a rigid network structure further contribute to the enhancement of the radiative process. Moreover, the photoinduced charge-transfer processes in the polyamide network structure easily explain the performance of CDs in applications as revealed in studies on metal ion sensing. These findings thus are of general importance to the further development of polymer CDs with tailored properties as well as for the design of technological applications., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742. AMB, and WKM further acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds). EPU acknowledges Gobierno de Aragón (Grupo Reconocido DGA E19_17R) and associated EU Regional Development Funds. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ ERDF and ESF) is gratefully acknowledged for assistance and generous allocation of computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacing transition metal dichalcogenides with carbon nanodots for managing photoinduced energy and chargetransfer processes

  • Vallan, Lorenzo
  • Canton-Vitoria, Rubén
  • Gobeze, Habtom B.
  • Jang, Youngwoo
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Souza, Francis d'
  • Tagmatarchis, Nikos
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1,2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation charge transfer from an exciton dissociation path of MoS2 to CNDs, within CNDMoS2, was observed. However, such process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes., This project has received funding from the European Union‘s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" co-financed by Greece (Ministry of Economy and Development, NSRF 2014-2020) and EU (European Regional Development Fund) to N. T. and the US-NSF (grant 1401188 to F. D.) is acknowledged. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016- 79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” grant agreement 785219. W. K. M. and A. M. B. acknowledge Spanish MINECO grant ENE2016-79282-C5-1-R (AEI/FEDER, EU) and the Covernment of Aragon through project DGA-T03_17R (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge-transfer characteristics in carbon nanostructure/metal oxide photoelectrodes efficiently probed by hydrogen peroxide

  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Víctor-Román, Sandra
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The charge-transfer characteristics of nanostructured carbon/TiO2 electrodes is studied by cyclic voltammetry under photoelectrochemical conditions exploiting the electrooxidation and electroreduction of H2O2 in an alkaline medium. Films of composites were prepared by physically mixing TiO2 with 5 wt.% of either singlewalled carbon nanotubes (SWCNTs) or reduced graphene oxide (rGO). In addition, a layer-by-layer rGO/TiO2 electrode was prepared. Under dark conditions, both mixed SWCNTs and rGO facilitate H2O2 reduction. Under light irradiation, the blank TiO2 electrode shows a cathodic photopotential, the SWCNT/TiO2 an anodic photopotential, and the mixed rGO/TiO2 an increased cathodic photopotential. This scenario unambiguously reveals a photoelectron acceptor behavior for SWCNTs and a photohole acceptor performance for rGO. The latter one also agrees with the photoactivity observed in the layer-by-layer electrode. Overall, the value of H2O2 redox reactions for unraveling the electron-donor or electron-acceptor character of carbon nanostructures in C/metal oxide electrodes is demonstrated., The authors thank Dr. B. Villacampa (University of Zaragoza) for the profilometer analysis, MSc. O. Sanahuja for GO preparation, and Eng. C. Rubio Muñoz for the SWCNT/TiO2 electrode preparation. This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

  • Puértolas, J. A.
  • Castro, Miguel
  • Morris, J. A.
  • Ríos, Ricardo
  • Ansón-Casaos, Alejandro
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Poly(ether ether ketone) (PEEK) is a relevant thermoplastic in industry and in the biomedical sector. In this work, the lubricant capability of graphene nanoplatelets (GNPs) is used for improving the PEEK wear properties. Nanocomposites were prepared by solvent-free melt-blending and injection molding at various compositions between 1 and 10 wt. % of GNPs. The Raman G band shows a progressive increment proportional to the bulk GNP percentage. From calorimetric data, the polymer matrix structure is interpreted in terms of a 3-phase model, in which the crystalline phase fluctuates from 39 to 34% upon GNP addition. Thermal conductivity varies in accordance with the polymer crystallinity. Tensile and flexural tests show a progressive increase in the modulus, as well as a decrease in the fracture strength and the work of fracture. Most important, the composite surface undergoes a substantial improvement in hardness (60%), together with a decrease in the coefficient of friction (−38%) and a great reduction in the wear factor (−83%). Abrasion and fatigue wear mechanisms are predominant at the lowest and highest GNP concentrations respectively. In conclusion, GNPs are used without any chemical functionalization as the filler in PEEK-based materials, improving the surface hardness and the tribological properties., This work has been funded by the University of Zaragoza (UZ2015-TEC-04), the MINECO together with the European Regional Development Fund (ENE 2016-79282-C5-1-R), and the Government of Aragon together with the European Social Fund (DGA T48- 17R, DGA-T03-17R and DGA E11-17R). Special thanks are directed to the Analysis Service of Instituto de Carboquímica, ICB-CSIC, in particular to A.I. Díaz-Megías., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the microstructure and surface chemistry of graphene aerogels via pH and time manipulation by a hydrothermal method

  • García-Bordejé, José Enrique
  • Víctor-Román, Sandra
  • Sanahuja-Parejo, Olga
  • Benito, Ana M.
  • Maser, Wolfgang K.
Three-dimensional graphene aerogels of controlled pore size have emerged as an important platform for several applications such as energy storage or oil–water separation. The aerogels of reduced graphene oxide are mouldable and light weight, with a porosity up to 99.9%, consisting mainly of macropores. Graphene aerogel preparation by self-assembly in the liquid phase is a promising strategy due to its tunability and sustainability. For graphene aerogels prepared by a hydrothermal method, it is known that the pH value has an impact on their properties but it is unclear how pH affects the auto-assembly process leading to the final properties. We have monitored the time evolution of the chemical and morphological properties of aerogels as a function of the initial pH value. In the hydrothermal treatment process, the hydrogel is precipitated earlier and with lower oxygen content for basic pH values (∼13 wt% O) than for acidic pH values (∼20 wt% O). Moreover, ∼7 wt% of nitrogen is incorporated on the graphene nanosheets at basic pH generated by NH3 addition. To our knowledge, there is no precedent showing that the pH value affects the microstructure of graphene nanosheets, which become more twisted and bent for the more intensive deoxygenation occurring at basic pH. The bent nanosheets attained at pH = 11 reduce the stacking by the basal planes and they connect via the borders, hence leading eventually to higher pore volumes. In contrast, the flatter graphene nanosheets attained under acidic pH entail more stacking and higher oxygen content after a long hydrothermal treatment. The gravimetric absorption capacity of non-polar solvents scales directly with the pore volume. The aerogels have proved to be highly selective, recyclable and robust for the absorption of nonpolar solvents in water. The control of the porous structure and surface chemistry by manipulation of pH and time will also pave the way for other applications such as supercapacitors or batteries., Financial support from Spanish MINECO under project ENE2016-79282-C5-1-R and its associated European Regional Development Fund, as well as from the Government of Aragon under project DGA-T66 and its associated European Social Fund is gratefully acknowledged., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanofoam supercapacitor electrodes with enhanced performance using a water-transfer process

  • Nufer, Sebastian
  • Lynch, Peter J.
  • Cann, Maria
  • Large, Matthew J.
  • Salvage, Jonathan P.
  • Víctor-Román, Sandra
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a highly porous, amorphous carbon nanomaterial that can be produced through the interaction of a high-fluence laser and a carbonbased target material. The morphology and electrical properties of CNF make it an ideal candidate for supercapacitor applications. In this paper, we prepare and characterize CNF supercapacitor electrodes through two different processes, namely, a direct process and a water-transfer process. We elucidate the influence of the production process on the microstructural properties of the CNF, as well as the final electrochemical performance. We show that a change in morphology due to capillary forces doubles the specific capacitance of the wet-transferred CNF electrodes., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.M.B., J.H.-F., and W.K.M. acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido DGA-T03_17R), and associated EU Regional Development Funds. S.V.-R. thanks Spanish MINEICO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoactivity improvement of TiO2 electrodes by thin hole transport layers of reduced graphene oxide

  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Víctor-Román, Sandra
  • Sanahuja-Parejo, Olga
  • Martínez Fernández de Landa, María Teresa
  • Villacampa, Belén
  • Benito, Ana M.
  • Maser, Wolfgang K.
9 Figuras, 2 Tablas.-- Datos suplementarios de este artículo disponibles en línea en la página web del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Nanostructured TiO2 and graphene-based materials constitute components of actual interest in devices related to solar energy conversion and storage. In this work, we show that a thin layer of electrochemically reduced graphene oxide (ECrGO), covering nanostructured TiO2 photoelectrodes, can significantly improve the photoactivity. In order to understand the working principle, ECrGO/TiO2 photoelectrodes with different ECrGO thicknesses were prepared and studied by a set of photoelectrochemical measurements. Methanol in alkaline conditions was employed as effective hole acceptor probe to elucidate the electronic phenomena in the electrode layers and interfaces. These studies underline the hole accepting properties of ECrGO and reveal the formation of a p-n junction at the interface between ECrGO and TiO2. It is shown for the first time that the resulting space charge region of about 10 nm defines the operational functionality of the ECrGO layer. Films thinner than the space charge region act as hole transport layer (HTL), which efficiently transfers holes to the liquid interface thus leading to enhanced photoactivity. Thicker films however act as hole blocking layer (HBL), resulting in a systematic decrease of the photoactivity. The finding of a thickness dependent threshold value for the operation of ECrGO as HTL and HBL is of general interest for the fabrication of optoelectronic devices with improved performance., The authors thank Prof. M.T. Martínez for AFM measurements and the Analysis Service of the Instituto de Carboquímica (ICB-CSIC) for XPS measurements. This work has received funding from the Spanish MINEICO (project grant ENE 2016-79282-C5-1-R), Gobierno de Aragón(Grupo ReconocidoDGA T03_17R), and associated EU Regional Development Funds. S.V. acknowledges Spanish MINEICO for her PhD grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmental impact of the production of graphene oxide and reduced graphene oxide

  • Serrano‑Luján, Lucía
  • Víctor-Román, Sandra
  • Toledo, Carlos
  • Sanahuja-Parejo, Olga
  • Mansour, Ahmed E.
  • Abad, José M.
  • Amassian, Aram
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Urbina, Antonio
1 Tabla, 5 Figuras.-- Material suplementario disponible en línea en la página web del editor., Reduced graphene oxide (rGO) is widely seen as the most promising route for the low-cost mass production of graphene for many applications ranging from ultrathin electrodes to structural nanocomposites. The Hummers and Marcano methods are the two most successful approaches for producing high-performance rGO, but have been criticized for producing toxic emissions. We have applied life cycle assessment methodology to evaluate the environmental impacts of both production routes for GO and rGO in the context of applications requiring bulk materials or thin coatings. We find no current obstacle to the industrial scale production of graphene arising from its environmental impact. The cumulative energy demand is found to have a cap value between 20.7 and 68.5 GJ/Kg, a relatively high value; impact in other categories (such as human toxicity or resource depletion) is lower, and materials inventory does not include critical/strategic materials other than graphite itself. Our study proposes 1 kg of graphene as functional unit, and an application-specific functional unit normalized by conductivity which show that Hummers production method is far more suitable for bulk applications of graphene, with lower embedded energy per kg of graphene production, while Marcano’s production method is better suited for thin film electronic applications., This work was supported by Projects ENE2016-79282-C5-1-R and ENE2016-79282-C5-5-R funded by MINECO-Spain (including EU FEDER funds), Project 19882-GERM-15 funded by F. Séneca (Región de Murcia, Spain), and DGA Grupo Reconocido T03_17R by Gobierno de Aragón (including EU FEDER funds). L. S.-L. and C. T. are also grateful to F. Séneca for postdoctoral grant Ref. 19759/PD/15, and predoctoral grant Ref.19768/FPI/15 respectively. SVR thanks Spanish MINECO for her PhD grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrating water-soluble polythiophene with transition-metal dichalcogenides for managing photoinduced processes

  • Canton-Vitoria, Rubén
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
6 Figuras. Información complementaria disponible en la página web del editor., Transition-metal dichalcogenides (TMDs) attract increased attention for the development of donor–acceptor materials enabling improved light harvesting and optoelectronic applications. The development of novel donor–acceptor nanoensembles consisting of poly(3-thiophene sodium acetate) and ammonium functionalized MoS2 and WS2 was accomplished, while photoelectrochemical cells were fabricated and examined. Attractive interactions between the negatively charged carboxylate anion on the polythiophene backbone and the positively charged ammonium moieties on the TMDs enabled in a controlled way and in aqueous dispersions the electrostatic association of two species, evidenced upon titration experiments. A progressive quenching of the characteristic fluorescence emission of the polythiophene derivative at 555 nm revealed photoinduced intraensemble energy and/or electron transfer from the polymer to the conduction band of the two TMDs. Photoelectrochemical assays further confirmed the establishment of photoinduced charge-transfer processes in thin films, with distinct responses for the MoS2- and WS2-based systems. The MoS2-based ensemble exhibited enhanced photoanodic currents offering additional channels for hole transfer to the solution, whereas the WS2-based one displayed increased photocathodic currents providing supplementary pathways of electron transfer to the solution. Moreover, scan direction depending on photoanodic and photocathodic currents suggested the existence of yet unexploited photoinduced memory effects. These findings highlight the value of electrostatic interactions for the creation of novel donor–acceptor TMD-based ensembles and their relevance for managing the performance of photoelectrochemical and optoelectronic processes., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 642742. Support of this work by the projects “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, and “National Infrastructure in Nanotechnology, Advanced Materials and Micro-/Nanoelectronics” (MIS 5002772), which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and cofinanced by Greece and the European Union (European Regional Development Fund) to N.T. is acknowledged. A.M.B. and W.K.M. further acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocidos DGA-T03_17R), and associated EU Regional Development Funds. E.P.U. thanks Gobierno de Aragón (Grupo de Investigación de Referencia E19_17R). The authors are thankful for SEC measurements carried out at Laboratories de Chime des Polymères Organiques (LCPO), University of Bordeaux, CNRS, Bordeaux INP. We would like to thank Dr. C. Chochos of the Institute of Biology, Medicinal Chemistry and Biotechnology/National Hellenic Research Foundation (IBMCB/NHRF) for helping with SEM images acquisition. NHRF acknowledges the General Secretariat for Research and Technology (GSRT) for the financial support through the Research Programs for Excellence under the Programmatic Agreement between Research Centers − GSRT (2015−2017), funded by Siemens SA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, Ana
  • Sanahuja-Parejo, Olga
  • Villacampa, Belén
  • Diez-Ferrer, José Luis
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Muñoz, Edgar
  • Ansón-Casaos, Alejandro
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A tool box to ascertain the nature of doping and photoresponse in single-walled carbon nanotubes

  • Santidrián, Ana
  • González Domínguez, José Miguel
  • Díez-Cabanes, Valentín
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Cornil, Jérôme
  • Ros, Tatiana da
  • Kalbáč, Martin
6 Figuras. 3 Tablas., The effect of doping on the electronic properties in bulk single-walled carbon nanotube (SWCNT) samples is studied for the first time using a new in situ Raman spectroelectrochemical method, and further verified by DFT calculations and photoresponse. We use p-/n-doped SWCNTs prepared by diazonium reactions as a versatile chemical strategy to control the SWCNT behavior. The measured and calculated data testify an acceptor effect of 4-aminobenzenesulfonic acid (p-doping), and a donor effect (n-doping) in the case of benzyl alcohol. In addition, pristine and covalently functionalized SWCNTs were used for the preparation of photoactive film electrodes. The photocathodic current in the photoelectrochemical cell is consistently modulated by the doping group. These results validate the in situ Raman spectroelectrochemistry as a unique tool box for predicting the electronic properties of functionalized SWCNTs in the form of thin films and their operational functionality in thin film devices for future optoelectronic applications., The authors acknowledge financial support from the European Union FP7 RADDEL programme (ITN Marie Curie Actions PEOPLE-2011-290023) and the MEYS Inter Excellence Project no. LTC18039 and H2020-MSCA RISE Agreement no. 734834 (INFUSION). This work at the Instituto de Carboquímica has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 ‘Enabling Excellence’). The work in Mons is supported by the European Union H2020 iSwitch programme (H2020-MSCA-ITN-2014-ETN 642196). Computational resources in Mons were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under Grant 2.5020.11. J. C. is an FNRS research director. The authors acknowledge the assistance provided by the Research Infrastructures NanoEnviCz (Project No. LM2015073) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the project Pro-NanoEnviCz (Reg. no. CZ.02.1.01/0.0/0.0/16_013/0001821) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the European Union – European Structural and Investments Funds in the frame of Operational Programme Research Development and Education. J. M. G.-D. is grateful to Spanish Ministry of Science, Innovation and Universities for his ‘Juan de la Cierva – Incorporación’ research grant. A. S. is grateful to Dr Sara Costa and Dr Johan Ek Weis for fruitful discussions and helpful comments., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Capacitive and charge transfer effects of single‐walled carbon nanotubes in TiO2 electrodes

  • Ansón-Casaos, Alejandro
  • Rubio-Muñoz, Cristina
  • Hernández-Ferrer, Javier
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 Figuras.- 1 Suplemento.- Título del pre-print: "Metallic and semiconducting carbon nanotube features observed in a hybrid titanium dioxide electrode".- This is the pre-peer reviewed version of the following article: ChemPhysChem 20: 838-847 (2019), which has been published in final form at DOI:10.1002/cphc.201900066. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The transfer of nanoscale properties from single‐walled carbon nanotubes (SWCNTs) to macroscopic systems is a topic of intense research. In particular, inorganic composites of SWCNTs and metal oxide semiconductors are being investigated for applications in electronics, energy devices, photocatalysis, and electroanalysis. In this work, a commercial SWCNT material is separated into fractions containing different conformations. The liquid fractions show clear variations in their optical absorbance spectra, indicating differences in the metallic/semiconducting character and the diameter of the SWCNTs. Also, changes in the surface chemistry and the electrical resistance are evidenced in SWCNT solid films. The starting SWCNT sample and the fractions as well are used to prepare hybrid electrodes with titanium dioxide (SWCNT/TiO2). Raman spectroscopy reflects the optoelectronic properties of SWCNTs in the SWCNT/TiO2 electrodes, while the electrochemical behavior is studied by cyclic voltammetry. A selective development of charge transfer characteristics and double‐layer behavior is achieved through the suitable choice of SWCNT fractions., This work has been funded by the Spanish Ministry of Science and the European Regional Development Fund (ENE 2016‐79282‐C5‐1‐R), the Government of Aragon (T03‐17R), and the European Commission (H2020‐MSCA‐ITN‐2014‐ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced graphene oxide aerogels with controlled continuous microchannels for environmental remediation

  • Rodríguez Mata, Vanesa
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
9 Figuras.- Información suplementaria., 3D porous graphene microarchitectures with aligned and continuous channels are of paramount interest for several applications such as pollutant removal, energy storage, or biomedical engineering. For these applications, an accurate control over the pore microstructure is of capital importance. Freeze casting is a well-stablished technique to prepare graphene aerogels with unidirectional channels. This technique is typically applied to plain GO colloids, leading to discontinuous microchannels. Herein we have carried out the freeze process starting directly with partially reduced graphene (rGO) hydrogels prepared by a prior hydrothermal treatment in autoclave. This approach leads to the formation of aerogels with aligned and continuous microchannels, enabled by an intermediate cross-linking degree of the rGO nanosheets, carefully controlled by keeping the time of the prior hydrothermal process between the thresholds of 45–75 min. To the best of our knowledge, the effect of the degree of cross-linking in the freeze casting process is not yet reported. The resulting rGO aerogels with highly aligned microchannel structure reveal superior properties over its isotropic counterpart of randomly oriented pores for the absorption of nonpolar solvents and the selective adsorption of an aromatic compound dissolved in an alkane. Our combined hydrothermal freeze casting approach thus affords aligned microchannel rGO aerogels of enormous potential for environmental remediation., Financial support from Spanish Ministry MINECO (Project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale J-aggregates of poly(3-hexylthiophene): Key to electronic interface interactions with graphene oxide as revealed by KPFM

  • Palacios-Lidón, E.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Colchero, J.
1 Esquema, 4 Figuras, The performance of organic thin film optoelectronic devices strongly relies on the nanoscale aggregate structure of the employed conjugated polymer. Their impact on electronic interface interactions with adjacent layers of graphene, widely reported to improve the device characteristics, yet remains an open issue, which needs to be addressed by an appropriate benchmark system. Here, we prepared discrete ensembles of poly(3-hexylthiophene) nanoparticles and graphene oxide sheets (P3HTNPs–GO) with well defined aggregate structures of either J- or H- type and imaged their photogenerated charge transfer dynamics across their interface by Kelvin probe force microscopy (KPFM). A distinctive inversion of the sign of the surface potential and surface photovoltage (SPV) demonstrates that J-aggregates are decisive for establishing charge transfer interactions with GO. These enable efficient injection of photogenerated holes from P3HTNPs into GO sheets over a range of tens of nanometers, causing a slow SPV relaxation dynamics, and define their operation as efficient hole-transport layer (HTL). Conversely, H-type aggregates do not facilitate specific interactions and entrust GO sheets the role of charge-blocking layers (CBL). The direct effect of P3HT’s aggregate structure on GO’s functional operation as HTL or CBL thus establishes clear criteria towards the rational design of improved organic optoelectronic devices., This work has received funding from the Spanish MINECO (project grants ENE 2016-79282-C5-1-R and ENE 2016-79282-C5-4-R) and associated EU Regional Development Funds. A.M.B., E.I., and W.K.M. acknowledge funding from European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowksa-Curie grant agreement no. 642742. They also acknowledge the Gobierno de Aragón (Grupo Reconocido DGA T03_17R) and associated EU Regional Development Funds., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A versatile room-temperature method for the preparation of customized fluorescent non-conjugated polymer dots

  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 Figuras, 2 Tablas.-- Material suplementario disponible en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We present a general procedure for the synthesis and in situ functionalization of highly fluorescent non-conjugated polymer dots, by exploiting the room-temperature carbodiimide-mediated condensation between citric acid and amines. The versatility of this method is proved by the preparation and characterization of a broad set of fluorescent nanoparticles with customized polymer structures and functional groups., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. A.M.B., W.K.M acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R) and associated EU Regional Development Funds. E.P.U acknowledges the Gobierno de Aragón (Grupo Reconocido DGA E19-17R) and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling the surface chemistry of graphene oxide: Key towards efficient ZnO-GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
12 Figures, 3 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Graphene oxide (GO) and related materials are widely reported to enhance the photocatalytic activity of zinc oxide. However, the origin of the observed performance improvements remains elusive and studies contributing to a deeper understanding of this critical issue are largely missing. In this work, we have prepared a set of benchmark ZnO-GO hybrid materials in order to systematically put under closer scrutiny the influence of the surface chemistry of GO on the photocatalytic degradation of methylene blue. The set of ZnO-GO hybrids has been synthesized in an ultrasonication process involving ZnO nanoparticles obtained in a microwave synthesis process and GO with three distinct oxidation degrees, employed in three different loading fractions. Structural and physical-chemical characterization by XRD, FTIR, Raman, UV–vis, photoluminescence and spectroscopy and XPS, consistently demonstrate the importance of the surface chemistry of GO for establishing photo-induced charge-transfer interface interactions with ZnO, facilitating the enhancement of the catalytic activity of the ZnO-GO catalyst. Optimized interface interactions thus enabled the design of a ZnO-GO catalyst exhibiting a conversion rate of 80% obtained in a time of 70 min and at a catalyst concentration of only 0.045 mg/mL., This work was financially supported by the Spanish MINEICO (project grant ENE 2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds. This work has been also partially supported by Project POCI-01-0145-FEDER-006984 – Associate Laboratory LSRE-LCM funded by European Regional Development Fund (ERDF) through COMPETE2020-Programa Operacional Competitividade e Internacionalização (POCI) – and by national funds through FCT-Fundação para a Ciência e a Tecnologia. S. Víctor-Roman acknowledges Spanish MINEICO for her PhD grant (BES2014-068727 and associated EU Social Funds) and for her research stay scholarship in Portugal (EEBB-I-18-12785). J.M. González-Domínguez acknowledges Spanish Ministry of Science, Innovation and Universities for his 'Juan de la Cierva - Incorporación' grant (IJCI-2016-27789)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Percolating metallic structures templated on laser-deposited carbon nanofoams derived from graphene oxide: applications in humidity sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Víctor-Román, Sandra
  • Peláez-Fernández, Mario
  • Nicolosi, Valeria
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
5 Figuras.-- Información complementaria disponible en línea en la página web del editor, Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF., Graham Booth’s work is highly appreciated, helping to set up the deposition system. This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement 642742 as well as from EU H2020 program “Graphene Flagship” (Grant Agreement 696656). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (Grant MAT2016-79776-P, (AEI/FEDER, UE)), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (Grant E/26). A.M.B and W.K.M gratefully acknowledge the financial support from Spanish MINECO and AEI (Project ENE2016-79282-C5-1-R and associated EU Regional Development Funds) and the Gobierno de Aragón (Consolidated Group DGA-T66-GCNN and associated EU Social Funds). S.V.-R. thanks Spanish MINECO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of argon ion sputtering on the surface of graphene/polyethylene composites

  • Ansón-Casaos, Alejandro
  • Aylón Marquina, Elvira
  • Ríos, Ricardo
  • Puértolas, J. A.
13 Figures, 1 Table.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Argon ion sputtering at various energies in the range of 500–5000 eV is performed on polymer composites of ultra-high molecular weight polyethylene (UHMWPE) with 4.6 wt% graphene nanoplatelets (GNPs). X-ray photoelectron spectroscopy (XPS) shows that irradiation above 3000 eV causes an abrupt transition from tetrahedral sp3 into planar sp2 carbon in the blank polyethylene surface. This graphitization process, as well as the formation of certain oxygen groups after the subsequent exposure to air, is delayed by graphene in the composites. Besides, both XPS and Raman spectroscopy indicate that a part of the sp2 graphene network is transformed into sp3 carbon defects by irradiation. Surface hardness and Young's modulus increase by 30–100% in blank polyethylene and the composites upon irradiation. The surface electrical resistance of polyethylene decreases from 1015 to 108 Ω by sputtering at 5000 eV. Composites that are consolidated at low temperature (175 °C) experience a transition from insulating (1015 Ω) to conducting (104 Ω) in a narrow range of Ar+ sputtering energies, while for a high consolidation temperature (240 °C) the transition is not observed. This research provides information on the induced interaction mechanisms between graphene and a polymer matrix upon ion beam irradiation., This work has been funded by the Spanish Ministry of Science and the European Regional Development Fund (ENE 2016-79282-C5-1-R), and the Government of Aragon together with the European Social Fund (DGA ESF T48-17R and T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intercalated water in multi-layered graphene oxide paper: an X-ray scattering study

  • Rouzière, Stéphan
  • Núñez, Jesús David
  • Paineau, Erwan
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Launois, Pascale
X-ray scattering (XRS) experiments have been performed on multi-layered graphene oxide (GO) paper. GO can be easily hydrated as water naturally intercalates in the hydro­philic nanostructure. The effect of the intercalated water on the XRS signals is measured during dehydration under thermal treatment in the temperature range 298–473 K as well as during hydration under saturated water vapour pressure. A simple modelling of the XRS signals by taking into account the presence and the type of intercalated water (bound water or physisorbed water) is introduced. It allows an explanation of the variations of intensity and position of XRS reflections observed experimentally., EP, SR and PL benefited of a grant from the French Research National Agency under the program Investissements d’Avenir (SEDECO project, ANR-10-LABX-0035: Labex NanoSa-clay). AMB and WKM acknowledge funding from the Spanish Ministry MINECO under projects ENE2013-48816-C5-5-R and ENE2016-79282-C5-1-R with their associated European Regional Development Funds, and from the Government of Aragon under Consolidated Group programme DGA-T66-GCNN and the associated European Social Fund., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards high-efficient microsupercapacitors based on reduced graphene oxide with optimized reduction degree

  • Rodríguez Mata, Vanesa
  • Hernández-Ferrer, Javier
  • Carrera Jiménez, Clara
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
6 Figuras, 5 Tablas.-- Información suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced graphene oxide aerogels synthetized using different times of hydrothermal treatment have been tested as raw material to prepare electrochemical supercapacitors. The gravimetric electrochemical capacitance measured using 1 M Na2SO4 as electrolyte was maximized for aerogels that underwent 45 min of hydrothermal treatment. The aerogels synthetized for longer durations of hydrothermal treatment exhibited higher electrical conductivity but the gravimetric capacitance drops dramatically due to an increasing resistance to diffusion of the electrolyte ions. The impeded diffusion is boosted by the intensified crosslinking between graphene sheets, which narrows the pores between them in the prepared electrode. The rGO aerogel attained for 45 min of hydrothermal treatment provided a high gravimetric capacitance of 400 F/g and 100 F/g at 50 A g−1 for three-electrode and two electrodes configuration, respectively, as well as good cyclic stability, competing with other similar carbon materials. Activation pretreatments or adding a second component (glucose, Mn, Fe, CNT) did not provide significant change of capacitance respect to pristine rGO aerogel., Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R(AEI/FEDER,UE)) and Gobierno de Aragón (Grupo Reconocido DGA T03_17R, including EU Regional Development Funds FEDER,UE) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unique properties and behavior of non-mercerized type-II cellulose nanocrystals as carbon nanotube biocompatible dispersants

  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Grasa, Laura
  • Abenia, Luis
  • Salvador, Alba
  • Colom, E.
  • Mesonero, José Emilio
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
2 Esquemas,7 Figuras.-- Información suplementaria disponible en la página web del editor.- This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Biomacromolecules 2019,20,8,3147-3160, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.biomac.9b00722, Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process. Here, we provide an optimal scenario to obtain either type-I or II nanocrystalline cellulose (NCC) by a mercerization-free method consisting only of the acid hydrolysis commonly used to produce nanocellulose from microcellulose. The possibility of having nonmercerized type-II NCC acquires a great relevance since this nanostructure shows particularly appealing properties. Moreover, an entangled and wrapped system arises when used as a dispersing agent for single-walled carbon nanotubes (SWCNTs), significantly different from that of type I. The biological testing of each NCC type and their respective SWCNT–NCC dispersions in human intestinal (Caco-2) cells reveals a general innocuous behavior in both cancer and normal stages of differentiation; however, the type-II-based SWCNT–NCC dispersions display cytotoxicity for cancer cells while enhancing mitochondrial metabolism of normal cells., J.M.G.-D. and E.C. acknowledge Spanish MINEICO for their Juan de la Cierva Incorporación research contract (ref IJCI-2016-27789) and PhD fellowship (FPI, ref BES-2017-080020, and associated EU Social Funds), respectively. This work has received funding from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) and the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds). Additional funding from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfonated hydrothermal carbons from cellulose and glucose as catalysts for glycerol ketalization

  • Fernández, Pablo
  • Fraile, José M.
  • García-Bordejé, José Enrique
  • Pires, Elísabet
12 Figuras, 1 Tabla.-- © The Author(s)., Solketal is one of the most used glycerol-derived solvents. Its production via heterogeneous catalysis is crucial for avoiding important product losses typically found in the aqueous work-up in homogeneous catalysis. In this work, we present a study of the catalytic synthesis of solketal using sulfonated hydrothermal carbons (SHTC). They were prepared from glucose and cellulose resulting in different textural properties depending on the hydrothermal treatment conditions. The sulfonated hydrothermal carbons were also coated on a graphite microfiber felt (SHTC@GF). Thus, up to nine different solids were tested, and their activity was compared with commercial acidic resins. The solids presented very different catalytic activity, which did not correlate with their physical-chemical properties indicating that other aspects likely influence the transport of reactants and products to the catalytic surface. Additionally, the SHTC prepared from cellulose showed better reusability in batch reaction tests. This work also presents the first results for the production of solketal in a flow reactor, which opens the way to the use of SHTC@GF for this kind of reactions., Financial support from Ministerio de Ciencia, Innovación y Universidades (project RTI2018-093431-B-I00 and ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Group E37_17R) co-funded by FEDER 2014-2020 “Construyendo Europa desde Aragón” is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cells

  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
2 Esquemas, 5 Figuras.-- This is the pre-peer reviewed version of the following article: "In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cell", Chemistry - an Asian Journal: 2019, which has been published in final form at https://doi.org/10.1002/asia.201901371. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions"., A facile strategy for the controllable growth of CdS nanoparticles at the periphery of MoS 2 en route the preparation of electron donor‐acceptor nanoensembles is developed. Precisely, the carboxylic group of α‐lipoic acid, as addend of the modified MoS 2 obtained upon 1,2‐dithiolane functionalization, was employed as anchor site for the in‐situ preparation and immobilization of the CdS nanoparticles in an one‐pot two‐step process. The newly prepared MoS 2 /CdS hybrid material was characterized by complementary spectroscopic, thermal and microscopy imaging means. Absorption spectroscopy was employed to register the formation of MoS 2 /CdS, by observing a broad shoulder centered at 420 nm due to CdS nanoparticles, while the excitonic bands of MoS 2 were also evident. Moreover, based on the efficient quenching of the characteristic fluorescence emission of CdS at 725 nm by the presence of MoS 2 , strong electronic interactions at the excited state between the two species within the ensemble were identified. Photoelectrochemical assays of MoS 2 /CdS thin‐film electrodes revealed a prompt, steady and reproducible anodic photoresponse during repeated on‐off cycles of illumination. A significant zero‐current photopotential of ‐540 mV and an anodic photocurrent of 1 μA were observed, underlining improved charge‐separation and electron transport from CdS to MoS 2 . The superior performance of the charge‐transfer processes in MoS 2 /CdS is of direct interest for the fabrication of photoelectrochemical and optoelectronic devices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which Submitted_Manuscript is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Differential properties and effects of fluorescent carbon nanoparticles towards intestinal theranostics

  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Grasa, Laura
  • González Domínguez, José Miguel
  • Martínez Fernández de Landa, María Teresa
  • Ballesteros, Belén
  • Urriolabeitia, Esteban P.
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
10 Figures, 5 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Given the potential applications of fluorescent carbon nanoparticles in biomedicine, the relationship between their chemical structure, optical properties and biocompatibility has to be investigated in detail. In this work, different types of fluorescent carbon nanoparticles are synthesized by acid treatment, sonochemical treatment, electrochemical cleavage and polycondensation. The particle size ranges from 1 to 6 nm, depending on the synthesis method. Nanoparticles that were prepared by acid or sonochemical treatments from graphite keep a crystalline core and can be classified as graphene quantum dots. The electrochemically produced nanoparticles do not clearly show the graphene core, but it is made of heterogeneous aromatic structures with limited size. The polycondensation nanoparticles do not have C=C double bonds. The type of functional groups on the carbon backbone and the optical properties, both absorbance and photoluminescence, strongly depend on the nanoparticle origin. The selected types of nanoparticles are compatible with human intestinal cells, while three of them also show activity against colon cancer cells. The widely different properties of the nanoparticle types need to be considered for their use as diagnosis markers and therapeutic vehicles, specifically in the digestive system., This work has been funded by MINEICO under project ENE2016-79282-C5-1-R, the Gobierno de Aragón (Grupo Reconocido T03-17R + E19-17R + A02-17R) and respective associated EU Regional Development Funds. J.M.G.-D. greatly acknowledges Spanish Ministry of Science, Innovation and Universities (MICINN, formerly MINEICO) for his “Juan de la Cierva – incorporación” grant (Ref. UCI-2016-27789). Special thanks are directed to Ms. L. Martinez for helping with the W-GQD preparation, the Analysis Service at Instituto de Carboquímica ICB-CSIC and the Electron Microscopy Service at the University of Zaragoza. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ru supported on N-doped reduced graphene oxide aerogels with different N-type for alcohol selective oxidation

  • Sánchez-García, Joel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
5 Figures, 2 Tables.-- Supplementary information available.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced graphene oxide aerogels doped with nitrogen have been prepared via two different strategies, namely, direct doping of rGO nanosheets with NH3 (GANH3) and coating the rGO nanosheets with an N-containing amorphous carbon derived from polydopamine (GADA). Both methods lead to comparable N/C ratios (3.4–4.7 %) but the relative contribution of quaternary nitrogen is 30 % for GADA while only 15 % for GANH3. Moreover, the N is incorporated within graphene lattice for GANH3 while it is within an amorphous carbon layer on top of graphene nanosheets for GADA. The Ru catalyst supported on the aerogels exhibited very distinct performance in the selective oxidation of benzyl alcohol depending on the support material despite having similar Ru particle size. The best performance for 5 wt% Ru on GADA can be explained by the larger reduction extent of Ru and the more hydrophobic surface. The open macroporosity of the aerogel makes it an excellent platform for using as structured catalyst in a continuous flow process., Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalized carbon dots on TiO2 for perovskite photovoltaics and stable photoanodes for water splitting

  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Vallan, Lorenzo
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
10 figures, 1 table, Various types of fluorescent carbon nanoparticles, often called carbon dots (CDs), are synthesized by different polycondensation methods: microwave irradiation, hydrothermal conditions or solution chemistry at ambient temperature with subsequent chemical functionalization. The CDs are deposited on TiO2 films to be probed as electron transport layers in perovskite photovoltaics and the anode for photoelectrochemical water splitting. Nitrogen CDs, which do not contain oxygen, lead to an increase of around 50 mV in the open circuit voltage of perovskite solar cells. All the CD types produce an improved photocurrent in water splitting, particularly CDs that are functionalized with thiol groups and butyl chains. It is demonstrated that the modified electrode is stable under continuous operation. Other electrochemical characteristics of the electrode, such as the voltammogram shape, onset potentials and open circuit potentials, remain nearly unchanged upon the deposition of CDs. Only the incident photon to current conversion efficiency improves clearly, extending the absorption range by around 20 nm towards longer wavelengths. This study provides new data about mechanisms and electrode arrangements for improving the performance of n-type semiconductors in photovoltaic cells and photoelectrochemical hydrogen production., This work has been funded by the Spanish MINEICO under the project ENE2016-79282-C5-1-R (AEI/FEDER, UE), the Government of Aragón (Grupo reconocido T03-17R) and associated EU Regional Development Funds (DGA/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids

  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Sanahuja-Parejo, Olga
  • Víctor-Román, Sandra
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 Tablas, 7 Figuras.-- Material suplementario disponible en línea en la página web del editor., Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e. 1D and 2D nanoparticles with extreme aspect ratios, is analyzed by empirical and predictive physical models. The focus is to understand how the nanoparticle shape, concentration, motion degrees and surface chemistry affect the viscosity of diluted dispersions. To this end, experimental results from capillary viscosimeters are first examined in terms of the energy of viscous flow and the maximum packing fraction applying the Maron-Pierce model. Next, a comparison of the experimental data with predictive physical models is carried out in terms of nanoparticle characteristics that affect the viscosity of the fluid, mostly their aspect ratio. The analysis of intrinsic viscosity data leads to a general understanding of motion modes for carbon nanoparticles, including those with extreme aspect ratios, in a flowing liquid. The resulting universal curve might be extended to the prediction of the viscosity for any kind of 1D and 2D nanoparticles in dilute suspensions., This work has been funded by the Spanish MINEICO under the project ENE 2016-79282-C5-1-R (AEI/FEDER, UE), the Government of Aragón (Grupo reconocido T03-20R) and associated EU Regional Development Funds (DGA/FEDER, UE). SVR thanks Spanish MINEICO for her PhD grant (BES2014-068727 and associated EU Social Funds). J.M.G.-D. greatly acknowledges Spanish Ministry of Science, Innovation and Universities (MICINN, formerly MINEICO) for his “Juan de la Cierva – incorporación” grant (Ref. JCI-2016-27789). We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes with acrylic additives: Blocking electrochemical charge transfer reactions

  • Ansón-Casaos, Alejandro
  • Sanahuja-Parejo, Olga
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures, 4 tables, Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode–electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration. Our results suggest a valuable strategy to enhance the chemical stability of CNT film electrodes and to suppress non-specific parasitic electrochemical reactions of relevance to electroanalytical and energy storage applications., This research was funded by the Spanish MINEICO under the project ENE 2016-79282-C5-1-R (AEI/FEDER, UE), and the Government of Aragón (Grupo reconocido T03-20R, DGA/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mono- and bimetallic metal catalysts based on Ni and Ru supported on alumina-coated monoliths for CO2 methanation

  • Bustinza, Ainhoa
  • Frías, Marina
  • Liu, Yuefeng
5 figures, 4 tables.-- Supplementary information available, Structured reactors such as monoliths have some favorable properties over fixed bed reactors such as low pressure drop, ease in handling and fast heat and mass transfer. Some of these properties make them advantageous reactors for the catalytic reduction of CO2 contained in post-combustion gases. Mono- and bimetallic Ru and Ni catalysts on alumina-washcoated cordierite monoliths have been scrutinized for CO2 methanation. The methodology for the preparation of NiRu bimetallic catalysts has been optimized to obtain an outperforming monolithic catalyst. The catalyst providing the highest CH4 productivity corresponds to a bimetallic NiRu catalyst with a small amount of Ru, prepared by consecutive impregnation of Ni and Ru precursors with an intermediate reduction step. This catalyst consists of 2–4 nm Ni nanoparticles interspersed with atomic Ru homogeneously distributed on the alumina coating. This nanostructure endows the catalyst with the highest density of basic sites of medium strength and the highest degree of Ni oxidation in the passivated catalyst compared to the other tested catalysts. The bimetallic monolithic catalyst afforded a stable CO2 methanation activity at high space velocities and with a low pressure drop, reducing energy consumption., The Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged. The DICP team acknowledges the National Natural Science Foundation of China (21872144 and 21972140), Liaoning Revitalization Talents Program (XLYC1907053) and CAS Youth Innovation Promotion Association (2018220) for financial support. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of physicochemical properties and boosting electrical conductivity of reduced graphene oxide aerogels by postsynthesis treatment

  • Carrera Jiménez, Clara
  • González Domínguez, José Miguel
  • Pascual, F. Javier
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
13 figures, Electrically conductive graphene aerogels are attracting great interest as functional materials. Nevertheless, graphene aerogels synthesized from graphene oxide usually exhibit low electrical conductivity. In order to increase conductivity, herein a postsynthesis thermal treatment at several temperatures (from 300 to 1000 °C) has been applied to pristine reduced graphene oxide aerogels under two different atmospheres, namely, inert Ar flow and isopropanol+H2 flow. Upon thermal treatment under Ar flow, the electrical conductivity of aerogel upscales with the treatment temperature. More remarkably, the electrical conductivity becomes 1 order of magnitude larger when the thermal treatment is carried out under isopropanol+H2 instead of under Ar, while maintaining a very low density and porous structure. The electrical conductivity achieved is exceptionally high for such a lightweight and porous material. The exhaustive characterization allowed disclosing that the generation of carbon links between the reduced graphene oxide nanosheets is the reason for this enhancement. The electrically conductive aerogels have excellent prospects for application as scaffolds for energy storage or biomedical applications., Financial support from Spanish Ministry MICINN under Project ENE2016-79282-C5-1-R (AEI/UE/FEDER), Gobierno de Aragón (Grupo reconocido DGA T03_17R, DGA/FEDER/UE), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt-doped ZnO nanorods coated with nanoscale metal-organic framework shells for water-splitting photoanodes

  • Galán, Alejandro
  • Sivan, Aswathi K.
  • Hernández-Ferrer, Javier
  • Bowen, Leon
  • Di Mario, Lorenzo
  • Martelli, Faustino
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Chaudhry, Mujeeb Ullah
  • Gallant, Andrew
  • Zeze, Dagou A.
5 figures.-- Supporting information available.-- This ACS article is provided under the terms of this ACS AuthorChoice/Editors’ Choice via Creative Commons CC-BY agreement: https://pubs.acs.org/page/policy/authorchoice_ccby_termsofuse.html, Developing highly efficient and stable photoelectrochemical (PEC) water-splitting electrodes via inexpensive, liquid phase processing is one of the key challenges for the conversion of solar energy into hydrogen for sustainable energy production. ZnO represents one the most suitable semiconductor metal oxide alternatives because of its high electron mobility, abundance, and low cost, although its performance is limited by its lack of absorption in the visible spectrum and reduced charge separation and charge transfer efficiency. Here, we present a solution-processed water-splitting photoanode based on Co-doped ZnO nanorods (NRs) coated with a transparent functionalizing metal–organic framework (MOF). The light absorption of the ZnO NRs is engineered toward the visible region by Co-doping, while the MOF significantly improves the stability and charge separation and transfer properties of the NRs. This synergetic combination of doping and nanoscale surface functionalization boosts the current density and functional lifetime of the photoanodes while achieving an unprecedented incident photon to current efficiency (IPCE) of 75% at 350 nm, which is over 2 times that of pristine ZnO. A theoretical model and band structure for the core–shell nanostructure is provided, highlighting how this nanomaterial combination provides an attractive pathway for the design of robust and highly efficient semiconductor-based photoanodes that can be translated to other semiconducting oxide systems., A.G.-G., A.K.S., F.M., A.G., D.A.Z., and D.A. acknowledge funding received from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 722176. W.K.M., A.M.B., and J.H.F. acknowledge financial support from Spanish Ministry MINEICO under Project ENE2016-79282-C5-1-R (AEI/UE/FEDER) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE y DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical properties and carrier dynamics in Co-doped ZnO nanorods

  • Sivan, Aswathi K.
  • Galán, Alejandro
  • Di Mario, Lorenzo
  • Tappy, Nicolas
  • Hernández-Ferrer, Javier
  • Catone, Daniele
  • Turchini, Stefano
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Escobar Steinvall, Simon
  • Fontcuberta i Morral, Anna
  • Gallant, Andrew
  • Zeze, Dagou A.
  • Atkinson, Del
  • Martelli, Faustino
8 figures.-- Supplementary information available., The controlled modification of the electronic properties of ZnO nanorods via transition metal doping is reported. A series of ZnO nanorods were synthesized by chemical bath growth with varying Co content from 0 to 20 atomic % in the growth solution. Optoelectronic behavior was probed using cathodoluminescence, time-resolved luminescence, transient absorbance spectroscopy, and the incident photon-to-current conversion efficiency (IPCE). Analysis indicates the crucial role of surface defects in determining the electronic behavior. Significantly, Co-doping extends the light absorption of the nanorods into the visible region, increases the surface defects, shortens the non-radiative lifetimes, while leaving the radiative lifetime constant. Furthermore, for 1 atomic % Co-doping the IPCE of the ZnO nanorods is enhanced. These results demonstrate that doping can controllably tune the functional electronic properties of ZnO nanorods for applications., WKM, AMB acknowledge Spanish MINEICO (ENE2016-79282-C5-1-R (AEI/FEDER, UE)), MICINN (PID2019-104272RB-C51/AEI/10.13039/501100011033), CSIC (2019AEP010) and Gobierno de Aragón (Grupo Reconocido DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ reduction by Joule heating and measurement of electrical conductivity of graphene oxide in a transmission electron microscope

  • Hettler, Simon
  • Sebastián del Río, David
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
4 figures.-- Supporting information available on the website of the publisher., Graphene oxide (GO) is reduced by Joule heating using in-situ transmission electron microscopy (TEM). The approach allows the simultaneous study of GO conductivity by electrical measurements and of its composition and structural properties throughout the reduction process by TEM, electron diffraction and electron energy-loss spectroscopy. The small changes of GO properties observed at low applied electric currents are attributed to the promotion of diffusion processes. The actual reduction process starts from an applied power density of about 2 × 1014 Wm−3 and occurs in a highly uniform and localized manner. The conductivity increases more than 4 orders of magnitude reaching a value of 3 × 103 Sm−1 with a final O content of less than 1%. We discuss differences between the reduction by thermal annealing and Joule heating., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1). Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P,AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; ENE2016-79282-C5-1-R, AEI/FEDER, EU and PID2019-104272RB-C51/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-17R (FEDER, EU); DGA T03-17R (FEDER, EU) and DGA T03-20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137), ITN Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene aerogels via hydrothermal gelation of graphene oxide colloids: Fine-tuning of its porous and chemical properties and catalytic applications

  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
14 figures.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Recently, 3D graphene aerogel has garnered a high interest aiming at benefiting of the excellent properties of graphene in devices for energy storage or environmental remediation. Hydrothermal gelation of GO dispersion is a straightforward method that offers many opportunities for tuning its properties and for processing it to devices. By adjusting hydrothermal gelation and drying conditions, it is possible to tune the density (from ~3 mg cm−3 to ~2 g cm−3), pore volume, pores size (micro to macropores), pore distribution, surface chemical polarity (hydrophobic or hydrophilic), and electrical conductivity (from ~0.5 S m−1 to S cm−1). Besides other well explored applications in energy storage or environmental remediation, graphene aerogels have excellent prospects as support for catalysis since they combine the advantages of graphene sheets (high surface area, high electrical conductivity, surface chemistry tunability, high adsorption capacity…) while circumventing their drawbacks such as difficult separation from reaction media or tendency to stacking. Compared to other 3D porous carbon materials used as catalyst support, graphene aerogels have unique porous structure. The pore walls are the thinnest to be expected for a carbon material (the thickness of monolayer graphene is 0.335 nm), hence leading to the highest exposed surface area per weight and even per volume for compacted aerogels. This has the potential to maximize the catalytic site density per reactor mass and volume while minimizing the pressure drop for continuous reactions in flow. Herein, different strategies to control the porous texture, chemical and physical properties are revised along with their processability and scalability for the implementation into different morphologies and devices. Finally, the application of graphene aerogels in the catalysis field are overviewed, giving a perspective about future directions needing further research., Financial support from Spanish Ministry MICINN under Project ENE2016-79282-C5-1-R (AEI/UE/FEDER), Gobierno de Aragon (Grupo reconocido T03_20R, DGA/FEDER/UE), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table.-- Supplementary information available., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez, Silvia
  • Sierra, Tania
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillén, Agustín G.
  • Escarpa, Alberto
4 figures, 2 tables., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financially supported by the TRANSNANOAVANSENS program from the Community of Madrid (P2018/NMT-4349), and the Spanish Ministry of Economy and Competitiveness (CTQ2017-86441-C2-1-R). Additional funding support was from Spanish MINEICO/MICINN under project with references ENE2016-79282-C5-1-R (AEI/FEDER/UE), PID2019-104272RB-C51/AEI/10.13039/501100011033, and PID2020-120439RA-I00. Funding support from Gobierno de Aragón (Grupo Reconocido T03_20R) is also acknowledged., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH¿O=C hydrogen bonds and the removal of chemisorbed water

  • Núñez, J.D.
  • Benito, A.M.
  • Rouzière, S.
  • Launois, P.
  • Arenal, R.
  • Ajayan, P.M.
  • Maser, W.K.
Owing to their great significance for energy storage and sensing applications, multi-layer papers consisting of graphene oxide-carbon nanotube (GO-CNT) hybrid sheets were prepared by in situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. the water molecules inherently bound to the oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH¿OC hydrogen bonds between the carboxylic groups of the oCNTs and OFGs of GO. At oCNT amounts of about 10 to 15 wt% this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. The thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of the cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, A.
  • Sanahuja, O.
  • Villacampa, B.
  • Diez, J.L.
  • Benito, Ana M.
  • Maser, W.K.
  • Muñoz, E.
  • Ansón Casaos, A.
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

  • Puértolas, J.A.
  • Castro, M.
  • Morris, J.A.
  • Ríos, R.
  • Ansón-Casaos, A.
Poly(ether ether ketone) (PEEK) is a relevant thermoplastic in industry and in the biomedical sector. In this work, the lubricant capability of graphene nanoplatelets (GNPs) is used for improving the PEEK wear properties. Nanocomposites were prepared by solvent-free melt-blending and injection molding at various compositions between 1 and 10 wt. % of GNPs. The Raman G band shows a progressive increment proportional to the bulk GNP percentage. From calorimetric data, the polymer matrix structure is interpreted in terms of a 3-phase model, in which the crystalline phase fluctuates from 39 to 34% upon GNP addition. Thermal conductivity varies in accordance with the polymer crystallinity. Tensile and flexural tests show a progressive increase in the modulus, as well as a decrease in the fracture strength and the work of fracture. Most important, the composite surface undergoes a substantial improvement in hardness (60%), together with a decrease in the coefficient of friction (-38%) and a great reduction in the wear factor (-83%). Abrasion and fatigue wear mechanisms are predominant at the lowest and highest GNP concentrations respectively. In conclusion, GNPs are used without any chemical functionalization as the filler in PEEK-based materials, improving the surface hardness and the tribological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sulfonated hydrothermal carbons from cellulose and glucose as catalysts for glycerol ketalization

  • Fernández, Pablo
  • Fraile, José María
  • García-Bordejé, Enrique
  • Pires, Elísabet
Soetal is one of the most used glycerol-derived solvents. Its production via heterogeneous catalysis is crucial for avoiding important product losses typically found in the aqueous work-up in homogeneous catalysis. In this work, we present a study of the catalytic synthesis of solketal using sulfonated hydrothermal carbons (SHTC). They were prepared from glucose and cellulose resulting in different textural properties depending on the hydrothermal treatment conditions. The sulfonated hydrothermal carbons were also coated on a graphite microfiber felt (SHTC@GF). Thus, up to nine different solids were tested, and their activity was compared with commercial acidic resins. The solids presented very different catalytic activity, which did not correlate with their physical-chemical properties indicating that other aspects likely influence the transport of reactants and products to the catalytic surface. Additionally, the SHTC prepared from cellulose showed better reusability in batch reaction tests. This work also presents the first results for the production of solketal in a flow reactor, which opens the way to the use of SHTC.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photoactivity improvement of TiO2 electrodes by thin hole transport layers of reduced graphene oxide

  • Hernández-Ferrer, J.
  • Ansón-Casaos, A.
  • Víctor-Román, S.
  • Sanahuja-Parejo, O.
  • Martínez, M.T.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Nanostructured TiO2 and graphene-based materials constitute components of actual interest in devices related to solar energy conversion and storage. In this work, we show that a thin layer of electrochemically reduced graphene oxide (ECrGO), covering nanostructured TiO2 photoelectrodes, can significantly improve the photoactivity. In order to understand the working principle, ECrGO/TiO2 photoelectrodes with different ECrGO thicknesses were prepared and studied by a set of photoelectrochemical measurements. Methanol in alkaline conditions was employed as effective hole acceptor probe to elucidate the electronic phenomena in the electrode layers and interfaces. These studies underline the hole accepting properties of ECrGO and reveal the formation of a p-n junction at the interface between ECrGO and TiO2. It is shown for the first time that the resulting space charge region of about 10 nm defines the operational functionality of the ECrGO layer. Films thinner than the space charge region act as hole transport layer (HTL), which efficiently transfers holes to the liquid interface thus leading to enhanced photoactivity. Thicker films however act as hole blocking layer (HBL), resulting in a systematic decrease of the photoactivity. The finding of a thickness dependent threshold value for the operation of ECrGO as HTL and HBL is of general interest for the fabrication of optoelectronic devices with improved performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Percolating Metallic Structures Templated on Laser-Deposited Carbon Nanofoams Derived from Graphene Oxide: Applications in Humidity Sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Victor-Roman, Sandra
  • Pelaez-Fernandez, Mario
  • Nicolosi, Valeria
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacing Transition Metal Dichalcogenides with Carbon Nanodots for Managing Photoinduced Energy and Charge-Transfer Processes

  • Vallan, L.
  • Canton-Vitoria, R.
  • Gobeze, H.B.
  • Jang, Y.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • D''Souza, F.
  • Tagmatarchis, N.
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1, 2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal, and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation, charge transfer from an exciton dissociation path of MoS2 to CNDs, within CND-MoS2, was observed. However, such a process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes. development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unique properties and behavior of nonmercerized type-ii cellulose nanocrystals as carbon nanotube biocompatible dispersants

  • Gonzalez-Dominguez, José Miguel
  • Anson-Casaos, Alejandro
  • Grasa, Laura
  • Abenia, Luis
  • Salvador, Alba
  • Colom, Eduardo
  • Mesonero, José E.
  • Garcia-Bordeje, J.Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process. Here, we provide an optimal scenario to obtain either type-I or II nanocrystalline cellulose (NCC) by a mercerization-free method consisting only of the acid hydrolysis commonly used to produce nanocellulose from microcellulose. The possibility of having nonmercerized type-II NCC acquires a great relevance since this nanostructure shows particularly appealing properties. Moreover, an entangled and wrapped system arises when used as a dispersing agent for single-walled carbon nanotubes (SWCNTs), significantly different from that of type I. The biological testing of each NCC type and their respective SWCNT-NCC dispersions in human intestinal (Caco-2) cells reveals a general innocuous behavior in both cancer and normal stages of differentiation; however, the type-II-based SWCNT-NCC dispersions display cytotoxicity for cancer cells while enhancing mitochondrial metabolism of normal cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes with acrylic additives: Blocking electrochemical charge transfer reactions

  • Ansón Casados, A.
  • Sanahuja Parejo, O.
  • Hernández Ferrer, J.
  • Benito, Ana M.
  • Wolfgang K., Maser
Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode–electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration. Our results suggest a valuable strategy to enhance the chemical stability of CNT film electrodes and to suppress non-specific parasitic electrochemical reactions of relevance to electroanalytical and energy storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Sanahuja-Parejo, O.
  • Víctor-Román, Sandra
  • González-Domínguez, J.M.
  • García-Bordejé, E.
  • Benito, Ana M.
  • Maser, W.K.
Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e. 1D and 2D nanoparticles with extreme aspect ratios, is analyzed by empirical and predictive physical models. The focus is to understand how the nanoparticle shape, concentration, motion degrees and surface chemistry affect the viscosity of diluted dispersions. To this end, experimental results from capillary viscosimeters are first examined in terms of the energy of viscous flow and the maximum packing fraction applying the Maron–Pierce model. Next, a comparison of the experimental data with predictive physical models is carried out in terms of nanoparticle characteristics that affect the viscosity of the fluid, mostly their aspect ratio. The analysis of intrinsic viscosity data leads to a general understanding of motion modes for carbon nanoparticles, including those with extreme aspect ratios, in a flowing liquid. The resulting universal curve might be extended to the prediction of the viscosity for any kind of 1D and 2D nanoparticles in dilute suspensions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modification of Physicochemical Properties and Boosting Electrical Conductivity of Reduced Graphene Oxide Aerogels by Postsynthesis Treatment

  • Carrera, C
  • Gonzalez-Dominguez, JM
  • Pascual, FJ
  • Anson-Casaos, A
  • Benito, AM
  • Maser, WK
  • Garcia-Bordeje, E
Electrically conductive graphene aerogels are attracting great interest as functional materials. Nevertheless, graphene aerogels synthesized from graphene oxide usually exhibit low electrical conductivity. In order to increase conductivity, herein a postsynthesis thermal treatment at several temperatures (from 300 to 1000 degrees C) has been applied to pristine reduced graphene oxide aerogels under two different atmospheres, namely, inert Ar flow and isopropanol+H-2 flow. Upon thermal treatment under Ar flow, the electrical conductivity of aerogel upscales with the treatment temperature. More remarkably, the electrical conductivity becomes 1 order of magnitude larger when the thermal treatment is carried out under isopropanol+H-2 instead of under Ar, while maintaining a very low density and porous structure. The electrical conductivity achieved is exceptionally high for such a lightweight and porous material. The exhaustive characterization allowed disclosing that the generation of carbon links between the reduced graphene oxide nanosheets is the reason for this enhancement. The electrically conductive aerogels have excellent prospects for application as scaffolds for energy storage or biomedical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential properties and effects of fluorescent carbon nanoparticles towards intestinal theranostics

  • Vallan, Lorenzo|||0000-0001-5267-4849
  • Hernández Ferrer, Javier|||0000-0002-6586-6935
  • Grasa, Laura
  • González-Domínguez, José Miguel|||0000-0002-0701-7695
  • Martínez Fernández de Landa, María Teresa
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Urriolabeitia, Esteban P.
  • Ansón-Casaos, Alejandro|||0000-0002-3134-8566
  • Benito, Ana M.|||0000-0002-8654-7386
  • Maser, Wolfgang K.|||0000-0003-4253-0758
Given the potential applications of fluorescent carbon nanoparticles in biomedicine, the relationship between their chemical structure, optical properties and biocompatibility has to be investigated in detail. In this work, different types of fluorescent carbon nanoparticles are synthesized by acid treatment, sonochemical treatment, electrochemical cleavage and polycondensation. The particle size ranges from 1 to 6 nm, depending on the synthesis method. Nanoparticles that were prepared by acid or sonochemical treatments from graphite keep a crystalline core and can be classified as graphene quantum dots. The electrochemically produced nanoparticles do not clearly show the graphene core, but it is made of heterogeneous aromatic structures with limited size. The polycondensation nanoparticles do not have C[dbnd]C double bonds. The type of functional groups on the carbon backbone and the optical properties, both absorbance and photoluminescence, strongly depend on the nanoparticle origin. The selected types of nanoparticles are compatible with human intestinal cells, while three of them also show activity against colon cancer cells. The widely different properties of the nanoparticle types need to be considered for their use as diagnosis markers and therapeutic vehicles, specifically in the digestive system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Functionalized carbon dots on TiO₂ for perovskite photovoltaics and stable photoanodes for water splitting

  • Ansón-Casaos, Alejandro|||0000-0002-3134-8566
  • Hernández Ferrer, Javier|||0000-0002-6586-6935
  • Vallan, Lorenzo|||0000-0001-5267-4849
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Benito, Ana M.|||0000-0002-8654-7386
  • Maser, Wolfgang K.|||0000-0003-4253-0758
Various types of fluorescent carbon nanoparticles, often called carbon dots (CDs), are synthesized by different polycondensation methods: microwave irradiation, hydrothermal conditions or solution chemistry at ambient temperature with subsequent chemical functionalization. The CDs are deposited on TiO films to be probed as electron transport layers in perovskite photovoltaics and the anode for photoelectrochemical water splitting. Nitrogen CDs, which do not contain oxygen, lead to an increase of around 50 mV in the open circuit voltage of perovskite solar cells. All the CD types produce an improved photocurrent in water splitting, particularly CDs that are functionalized with thiol groups and butyl chains. It is demonstrated that the modified electrode is stable under continuous operation. Other electrochemical characteristics of the electrode, such as the voltammogram shape, onset potentials and open circuit potentials, remain nearly unchanged upon the deposition of CDs. Only the incident photon to current conversion efficiency improves clearly, extending the absorption range by around 20 nm towards longer wavelengths. This study provides new data about mechanisms and electrode arrangements for improving the performance of n-type semiconductors in photovoltaic cells and photoelectrochemical hydrogen production.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez Herranz, Silvia|||0000-0002-1999-5605
  • Sierra Gómez, Tania|||0000-0003-3019-2026
  • Álvarez Sánchez, Miguel A.
  • González Domínguez, José L.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillen, Agustín G.
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
10 p., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L?1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Comunidad de Madrid; Ministerio de Economía y Competitividad de España; CRUE-CSIC; Gobierno de Aragon, Comunidad de Madrid, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Gobierno de Aragón