Pasar al contenido principal

EVALUACION DEL RIESGO DE FRACTURA OSEA CON PREVALENCIA DE OSTEOPOROSIS MEDIANTE UN ENFOQUE MULTIESCALA

PID2020-118920RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of the in-plane ultimate stress of lamellar tissue as a function of bone mineral density and osteocyte lacunae porosity

  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Belda Ricardo|||0000-0003-3913-5773
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Vargas, Pablo
[EN] Detailed finite element models based on medical images (𝜇-CT) are commonly used to analyze the mechanical behavior of bone at microscale. In order to simulate the tissue failure onset, isotropic failure criteria of lamellar tissue are often used, despite its non-isotropic and heterogeneous nature. The main goal of the present work is to estimate the in-plane ultimate stress of lamellar bone, considering the influence of mineral content and the porosity due to the osteocyte lacunae concentration. To this aim, a representative volume cell of lamellar tissue is modeled numerically, including: (1) non-isotropic elastic properties of tissue as a function of the bone mineral density and (2) explicit modeling of the osteocyte lacunae, considering the range of porosity content, size and orientation of ellipsoid-shaped lacunae. Firstly, the element size for the finite element models have been defined from a preliminary convergence analysis. Bounds on the ultimate stress of non-porous lamellar tissue are estimated for two values of bone mineral density, considering the results of tensile and compressive tests of wet osteons from the literature. Subsequently, the ultimate stress of lamellar tissue considering several values of micro-porosity is addressed. Results: Results obtained in this work show that the strength of lamellar bone decreases exponentially with the increase of lacunae porosity concentration. Ultimate stress of non-porous tissue (𝑝 = 0%) increases with high mineral content, reaching a value of ̄ 𝑆 𝑐 𝑡𝑟𝑎𝑛𝑠 = 355.40 ± 39.80 MPa for compression in the transversal direction of the fiber bundles, being BMD = 1.246 g/cm3. The mean value for the longitudinal to transverse strength ratio evaluated for porosity 𝑝 = 0%, 1% and 5% and a mineral content BMD = 1.2 g/cm3, is 2.47:1 for tension and 1.55:1 for compression. These values are in agreement with literature. Conclusions: Osteocyte lacunae act as stress concentrators, acting as potential stimulus for the bone regeneration process. A novel micromechanical model for the in-plane ultimate stress of lamellar tissue as a function of mineral content and lacunae concentration is presented. Additional considerations about the intralamellar shear stress evolution are also given, The authors acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020- 118920RB-I00 and PID2020-118480RB-C21 and C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , the Ministerio de Ciencia e Innovación y Universidades MCIN/AEI/ 10.13039/501100011033 and Europe Union NextGenerationEU/PRTR for the projects PDC2021-121368-C21 and C22, and the Generalitat Valenciana for Programa PROMETEO/2021/046
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of the interfaces and cross-links on the mechanical behavior of mineralized collagen fibrils. A numerical approach

  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • García-Aznar, J. Manuel
[EN] Mechanical properties of bone tissue are highly dependent on its hierarchical structure. The presence of microcracks and diffuse damage in lamellar bone is correlated with the failure of the collagen-mineral interface in mineralized collagen fibrils (MCF). The main goal of this work is to evaluate the mechanical behavior of the interfaces and quantify the stiffness loss of the MCF associated with different failure mechanisms, under controlled in-plane displacement. Additionally, we aim to study the role of the cross-links on the fibril mechanical response, beyond the interface failure. Inter- and intra-microfibrilar cross-links are analyzed. In order to address the first issue, a detailed representative volume of the MCF is analyzed by means of the finite element method, under the assumption of plane strain and periodic boundary conditions. In this model the interfaces between constituents are modeled with an exponential cohesive law. Enzymatic cross-links, located at the molecular terminals connecting each 4D (D = 67 nm) staggered molecules, are represented by non-linear springs. Three in-plane controlled deformations are applied. The results of this work provide the anisotropic stiffness loss of the tissue involved in the different failure mechanisms at the nano-scale length. The initiation of microcracks and the presence of damage zones are compatible with the failure mechanisms observed at interfaces. Interface failure entails a progressive stiffness loss, bringing a non-linear behavior of bone. The strength obtained for the longitudinal maximum deformation is more than 20 times the transverse strength and 3.5 times the shear strength. The quantification of the reduction percentage in the elastic moduli and the shear stiffness when the fibril is damaged, has a potential application in improving failure criteria based on degradation of elastic constants. When longitudinal elongation is applied, the mechanical contribution of the cross-links in delaying the failure initiation of the interface is shown. Likewise, results of this work confirm the scarce influence of the cross-links in the strain range analyzed. Additionally, a threedimensional numerical model of several microfibrils is defined with the aim of analyzing the mechanical relevance of inter- and intra-microfibrilar cross-links, beyond the interface failure. Results confirm that cross-links transfer the load when strain increases, being highlighted the mechanical competence of the trivalent cross-links., The authors acknowledge the Ministerio de Ciencia e Innovacion y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020-118920RB-I00, PID2020-118480RB-C21 and C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", the Ministerio de Ciencia e Innovacion y Universidades MCIN/AEI/10.13039/501100011033 and Europe Union Next Generation EU/PRTR for the projects PDC2021-121368-C21 and C22, CRUE-Universitat Politecnica de Valencia and the Generalitat Valenciana for Programa PROMETEO/2021/046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring design strategies for patient-specific bone scaffolds to create a uniform mechanical environment in trabecular bone

  • Andrea Fresquet Monter
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Background and Objective: Large bone defects cannot be repaired by the inherent regeneration mechanisms of bone due to their size, which makes medical intervention essential. Current therapeutic treatments have their limitations, which has led to the study and development of bone scaffolds that maintain structural integrity during bone healing. Novel designs are required to create a mechanical environment that promote osseointegration. In this work, we aim to analyse the effect of patient-specific designs on the creation of a uniform mechanical environment in bone-scaffold constructs. Methods: Novel patient-specific Triply Periodic Minimal Surface (TPMS) structures were designed according to the characterisation of the microstructure of healthy and osteoporotic human cancellous bone to mimic morphometry. In addition, the assessment of the TPMS representative volume element size was also considered for scaffold design. The interaction between bone and scaffold was analysed through finite element model simulation. In those bone-scaffold assemblies we evaluated three different design strategies: (1) matching bone microstructure; (2) similar apparent compression elastic modulus; and (3) mimicking both the morphometry and the apparent modulus of trabecular bone. Results: The stress distribution in patient-specific TPMS scaffolds is 83.86 % similar to that of the targeted bone, significantly outperforming the 54.41 % similarity of non-patient-specific solutions. Conclusions: The design of novel patient-specific scaffolds based on a microstructure similar to cancellous bone allows a uniform stress distribution. Hence, matching both the bone morphometry and apparent elastic modulus is a key issue to reducing stress shielding phenomena and inducing osseointegration., The authors acknowledge the Ministerio de Ciencia e Innovación y Universidades and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020- 118920RB-I00 and PID2023-151610OB-C22 funded by MCIN/AEI /10.13039/501100011033, the Generalitat Valenciana PROMETEO/2021/046, CIGE/2023/110 and CIACIF/2023/454, and CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of the influence of triply periodic minimal surface structures morphometry on the mechanical response

  • Belda Ricardo|||0000-0003-3913-5773
  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Marco, Miguel
[EN] Background and Objective: Design of bone scaffolds requires a combination of material and geometry to fulfil requirements of mechanical properties, porosity and pore size. Triply Periodic Minimal Surface (TPMS) structures have gained attention due to their similarities to cancellous bone. In this work, we aim at exploring relationships between morphometry and mechanical properties for TPMS configurations.Methods: Eight TPMS structures are defined considering six porosity levels and their morphometry is characterized. The stiffness matrix of each structure is assessed and related to morphometry through a statistical analysis.Results: An orthotropic mechanical behavior has been derived from the numerical homogenization. Prop-erties decay exponentially for decreasing volume fraction. Through volume fraction variation, TPMS me-chanical properties can be selected to match bone properties in a range of 0.2% to 70% of the bulk mate-rial properties.Conclusions: The comparison between cancellous bone and TPMS morphometry, considering a unit cell size of 1.5 mm, reveals that the configurations analyzed in this work match the requirements of volume fraction, mean thickness and pore size. However, the TPMS studied in this work differ from cancellous bone anisotropy. The results in this paper provide a framework to select the proper TPMS configuration and its geometry for patient-specific applications., This work was supported by the Spanish Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033 through grant numbers PID2020-118480RB-C21, PID2020-118920RB-I0 0 and PID2020-112628RA-I0 0, the European Union NextGenerationEU/PRTR through grant number PDC2021-121368-C22 and the Generalitat Valenciana (Programme PROMETEO 2021/046 and Plan FDGENT 2018 GVA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical modelling of cancellous bone damage using an orthotropic failure criterion and tissue elastic properties as a function of the mineral content and microporosity.

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Belda Ricardo|||0000-0003-3913-5773
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • PERIS SERRA, JOSE LUIS
  • Larrainzar-Garijo, Ricardo
[EN] Background and objective : Elastic and strength properties of lamellar tissue are essential to analyze the mechanical behaviour of bone at the meso- or macro-scale. Although many effort s have been made to model the architecture of cancellous bone, in general, isotropic elastic constants are assumed for tissue modelling, neglecting its non-isotropic behaviour. Therefore, isotropic damage laws are often used to esti- mate the bone failure. The main goals of this work are: (1) to present a new model for the estimation of the elastic properties of lamellar tissue which includes the bone mineral density (BMD) and the micro- porosity, (2) to address the numerical modelling of cancellous bone damage using an orthotropic failure criterion and a discrete damage mechanics analysis, including the novel approach for the tissue elastic properties aforementioned. Methods : Numerical homogenization has been used to estimate the elastic properties of lamellar bone considering BMD and microporosity. Microcomputed Tomography ( ¿-CT) scans have been performed to obtain the micro-finite element ( ¿-FE) model of cancellous bone from a vertebra of swine. In this model, lamellar tissue is orientated by considering a unidirectional layer pattern being the mineralized colla- gen fibrils aligned with the most representative geometrical feature of the trabeculae network. We have considered the Hashin¿s failure criterion and the Material Property Degradation (MPDG) method for sim- ulating the onset and evolution of bone damage. Results: The terms of the stiffness matrix for lamellar tissue are derived as functions of the BMD and mi- croporosity at tissue scale. Results obtained for the apparent yield strain values agree with experimental values found in the literature. The influence of the damage parameters on the bone mechanics behaviour is also presented. Conclusions : Stiffness matrix of lamellar tissue depends on both BMD and microporosity. The new ap- proach presented in this work enables to analyze the influence of the BMD and porosity on the mechan- ical response of bone. Lamellar tissue orientation has to be considered in the mechanical analysis of the cancellous bone. An orthotropic failure criterion can be used to analyze the bone failure onset instead of isotropic criteria. The elastic property degradation method is an efficient procedure to analyze the failure propagation in a 3D numerical model., The authors acknowledge the Ministerio de Ciencia e Innovacion and the European Regional Development Fund (FEDER) for the financial support received through the projects PID2020-118920RB-I00 and PID2020-118480RB-C21, the Generalitat Valenciana for Plan FDGENT 2018 and Programme PROMETEO 2021/046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strength and toughness estimation of cement lines in cortical bone via finite fracture mechanics and numerical modeling

  • Quiñonero-Moya, Antonio Ramón|||0000-0002-2370-7960
  • Infante-García, Diego|||0000-0001-6010-2031
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] The mechanical characterization of bone tissue presents significant challenges due to its hierarchical multi-scale structure. A precise modeling of bone fracture at the micro-scale requires the inclusion of bone micro constituents, their mechanical properties and interactions. Among micro constituents, cement lines play a significant role in fracture propagation, because they constitute the most likely crack growth path, while allowing the increase of fracture toughness due to crack arrest and deflection. To address this challenge, researchers often estimate the fracture toughness of cortical bone constituents at the micro-scale by combining experimental testing with numerical simulations. This work presents a first approach to the application of finite fracture mechanics to estimate the fracture toughness and strength of cement lines. An inverse problem analysis using an interface failure model, based on the coupled criterion and an optimization algorithm, is evaluated to estimate the material properties of cement lines in conjunction with experimental data. In addition, simulations considering a cohesive zone model using the estimated properties via finite fracture mechanics show strong agreement with the experimental results. Lastly, the phase field model and cohesive interfaces are successfully applied to assess crack propagation across the cortical bone microstructure. The results can be of interest to model cortical bone fracture and evaluate fracture risk at different length scales., The authors acknowledge the financial support received through the project PID2023-151610OB-C22 funded by MICIU/AEI/10.1 3039/501100011033 and FEDER, UE, the project PID2020-118920RB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF A way of making Europe , grant PRE2021-097626 funded by MICIU/AEI/10.13039/501100011033 and by ESF+ , programme PROMETEO 2021/046 and CIGE/2023/110 funded by the Generalitat Valenciana, Spain. The funding of Vice-Rectorate for Research of Universitat Politècnica de València with the project Primeros Proyectos de Investigación (PAID-06-23) is also acknowledged. Funding for open access charge: CRUE-Universitat Politècnica de València.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of the interfaces and cross-links on the mechanical behavior of mineralized collagen fibrils. A numerical approach

  • Vercher-Martínez, Ana
  • Giner, Eugenio
  • Fuenmayor, F. Javier
  • García-Aznar, J. Manuel
Mechanical properties of bone tissue are highly dependent on its hierarchical structure. The presence of microcracks and diffuse damage in lamellar bone is correlated with the failure of the collagen-mineral interface in mineralized collagen fibrils (MCF). The main goal of this work is to evaluate the mechanical behavior of the interfaces and quantify the stiffness loss of the MCF associated with different failure mechanisms, under controlled in-plane displacement. Additionally, we aim to study the role of the cross-links on the fibril mechanical response, beyond the interface failure. Inter- and intra-microfibrilar cross-links are analyzed. In order to address the first issue, a detailed representative volume of the MCF is analyzed by means of the finite element method, under the assumption of plane strain and periodic boundary conditions. In this model the interfaces between constituents are modeled with an exponential cohesive law. Enzymatic cross-links, located at the molecular terminals connecting each 4D ( ) staggered molecules, are represented by non-linear springs. Three in-plane controlled deformations are applied. The results of this work provide the anisotropic stiffness loss of the tissue involved in the different failure mechanisms at the nano-scale length. The initiation of microcracks and the presence of damage zones are compatible with the failure mechanisms observed at interfaces. Interface failure entails a progressive stiffness loss, bringing a non-linear behavior of bone. The strength obtained for the longitudinal maximum deformation is more than 20 times the transverse strength and 3.5 times the shear strength. The quantification of the reduction percentage in the elastic moduli and the shear stiffness when the fibril is damaged, has a potential application in improving failure criteria based on degradation of elastic constants. When longitudinal elongation is applied, the mechanical contribution of the cross-links in delaying the failure initiation of the interface is shown. Likewise, results of this work confirm the scarce influence of the cross-links in the strain range analyzed. Additionally, a three-dimensional numerical model of several microfibrils is defined with the aim of analyzing the mechanical relevance of inter- and intra-microfibrilar cross-links, beyond the interface failure. Results confirm that cross-links transfer the load when strain increases, being highlighted the mechanical competence of the trivalent cross-links.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Numerical modelling of cancellous bone damage using an orthotropic failure criterion and tissue elastic properties as a function of the mineral content and microporosity

  • Larrainzar Garijo, Ricardo
  • Megías , Raquel
  • Vercher-Martínez, Ana
  • Belda, Ricardo
  • Peris, José Luis
  • Giner, Eugenio
  • Fuenmayor, Javier
Background and objective: Elastic and strength properties of lamellar tissue are essential to analyze the mechanical behaviour of bone at the meso- or macro-scale. Although many efforts have been made to model the architecture of cancellous bone, in general, isotropic elastic constants are assumed for tissue modelling, neglecting its non-isotropic behaviour. Therefore, isotropic damage laws are often used to estimate the bone failure. The main goals of this work are: (1) to present a new model for the estimation of the elastic properties of lamellar tissue which includes the bone mineral density (BMD) and the microporosity, (2) to address the numerical modelling of cancellous bone damage using an orthotropic failure criterion and a discrete damage mechanics analysis, including the novel approach for the tissue elastic properties aforementioned. Methods: Numerical homogenization has been used to estimate the elastic properties of lamellar bone considering BMD and microporosity. Microcomputed Tomography (μ-CT) scans have been performed to obtain the micro-finite element (μ-FE) model of cancellous bone from a vertebra of swine. In this model, lamellar tissue is orientated by considering a unidirectional layer pattern being the mineralized collagen fibrils aligned with the most representative geometrical feature of the trabeculae network. We have considered the Hashin's failure criterion and the Material Property Degradation (MPDG) method for simulating the onset and evolution of bone damage. Results: The terms of the stiffness matrix for lamellar tissue are derived as functions of the BMD and microporosity at tissue scale. Results obtained for the apparent yield strain values agree with experimental values found in the literature. The influence of the damage parameters on the bone mechanics behaviour is also presented. Conclusions: Stiffness matrix of lamellar tissue depends on both BMD and microporosity. The new approach presented in this work enables to analyze the influence of the BMD and porosity on the mechanical response of bone. Lamellar tissue orientation has to be considered in the mechanical analysis of the cancellous bone. An orthotropic failure criterion can be used to analyze the bone failure onset instead of isotropic criteria. The elastic property degradation method is an efficient procedure to analyze the failure propagation in a 3D numerical model.