Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Shoaling of nonlinear steady waves: maximum height and angle of breaking

  • Romero, S.
  • Farina, L.
A Fourier approximation method is used for modeling and simu- lation of fully nonlinear steady waves. The set of resulting nonlinear equations are solved by Newton’s method. The shoaling of waves is simulated based on comparisons with experimental data. The wave heights and the angles of breaking are analysed until the limit of inadequacy of the numerical method. The results appear quite close to those criteria predicted by the theory of com- pletely nonlinear surface waves and contribute to provide information on the study of the relationship between computational modeling and the theory of steady waves.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Time-resolved adaptive FEM simulation of the DLR-F11 aircraft model at high Reynolds number

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
  • de Abreu, R.V.
We present a time-resolved, adaptive finite element method for aerodynamics, together with the results from the HiLiftPW-2 workshop, where this method is used to compute the ow past a DLR-F11 aircraft model at realistic Reynolds number. The mesh is automatically constructed by the method as part of the computation, and no explicit turbulence model is used. The effect of unresolved turbulent boundary layers is modeled by a simple parametrization of the wall shear stress in terms of the skin friction. In the extreme case of very high Reynolds numbers we approximate the small skin friction by zero skin friction, corresponding to a free slip boundary condition, which results in a computational model without any model parameter that needs tuning. Thus, the simulation methodology bypasses the main challenges posed by high Reynolds number CFD: the design of an optimal computational mesh, turbulence (or subgrid) modeling, and the cost of boundary layer res- olution. The results from HiLiftPW-2 presented in this report show good agreement with experimental data for a range of different angles of attack, while using orders of magnitude fewer degrees of freedom than what is needed in state of the art methods such as RANS.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

LBM-HPC - An open-source tool for fluid simulations. Case study: Unified parallel C (UPC-PGAS)

  • Valero-Lara, P.
  • Jansson, J.
The main motivation of this work is the evaluation of the Unified Parallel C (UPC) model, for Boltzmann-fluid simulations. UPC is one of the current models in the so-called Partitioned Global Address Space paradigm. This paradigm attempts to increase the simplicity of codes and achieve a better efficiency and scalability. Two different UPC-based implementations, explicit and implicit, are presented and evaluated. We compare the fundamental features of our UPC implementations with other parallel programming model, MPI-OpenMP. In particular each of the major steps of any LBM code, i.e., Boundary Conditions, Communication, and LBM solver, are analyzed.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

A Non-uniform Staggered Cartesian Grid approach for Lattice-Boltzmann method

  • Valero-Lara, P.
  • Jansson, J.
We propose a numerical approach based on the Lattice-Boltzmann method (LBM) for dealing with mesh refinement of Non-uniform Staggered Cartesian Grid. We explain, in detail, the strategy for mapping LBM over such geometries. The main benefit of this approach, compared to others, consists of solving all fluid units only once per time-step, and also reducing considerably the complexity of the communication and memory management between different refined levels. Also, it exhibits a better matching for parallel processors. To validate our method, we analyze several standard test scenarios, reaching satisfactory results with respect to other stateof-the-art methods. The performance evaluation proves that our approach not only exhibits a simpler and efficient scheme for dealing with mesh refinement, but also fast resolution, even in those scenarios where our approach needs to use a higher number of fluid units.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Accelerating fluid-solid simulations (Lattice-Boltzmann & Immersed-Boundary) on heterogeneous architectures

  • Valero-Lara, P.
  • Igual, F.D.
  • Prieto-Matias, M.
  • Pinelli, A.
  • Favier, J.
We propose a numerical approach based on the Lattice-Boltzmann (LBM) and Immersed Boundary (IB) methods to tackle the problem of the interaction of solids with an incompressible fluid flow, and its implementation on heterogeneous platforms based on data-parallel accelerators such as NVIDIA GPUs and the Intel Xeon Phi. We explain in detail the parallelization of these methods and describe a number of optimizations, mainly focusing on improving memory management and reducing the cost of host-accelerator communication. As previous research has consistently shown, pure LBM simulations are able to achieve good performance results on heterogeneous systems thanks to the high parallel efficiency of this method. Unfortunately, when coupling LBM and IB methods, the overheads of IB degrade the overall performance. As an alternative, we have explored different hybrid implementations that effectively hide such overheads and allow us to exploit both the multi-core and the hardware accelerator in a cooperative way, with excellent performance results.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Multi-domain grid refinement for lattice-Boltzmann simulations on heterogeneous platforms

  • Valero-Lara, P.
  • Jansson, J.
The main contribution of the present work consists of several parallel approaches for grid refinement based on a multi-domain decomposition for lattice-Boltzmann simulations. The proposed method for discretizing the fluid incorporates different regular Cartesian grids with no homogeneous spatial domains, which are in need to be communicated each other. Three different parallel approaches are proposed, homogeneous Multicore, homogeneous GPU, and heterogeneous Multicore-GPU. Although, the homogeneous implementations exhibit satisfactory results, the heterogeneous approach achieves up to 30% extra efficiency, in terms of Millions of Fluid Lattice Updates per Second (MFLUPS), by overlapping some of the steps on both architectures, Multicore and GPU.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Identification of defects originated during the filling of cast pieces through particles modelling

  • Blanco, J.M.
  • Carranza, P.
  • Pintos, R.
  • Arriaga, P.
  • Remaki, L.
In casting processes, strong recirculation zones may trap air, gases and strip particles of sand off the mold affecting seriously the quality of the cast pieces. Especially during the filling of molten pieces with large surfaces, several faults were detected which are responsible of considerable economic losses in such casting processes. The aim of this work is focused on the correct identification of these physical phenomena, through Computational Fluid Dynamics (CFD). A fully experimental work correlating a saline solution with similar properties than the liquid alloy was carried out in order to guess the flow behavior inside the mold. Different parameters such as filling time, temperature and velocity of the liquid alloy together with the geometrical design of the mold were taken into account. The simulated evolution profiles and propagation speeds were compared with the laboratory experiments showing good agreement, validating thus the numerical model. Through an advanced particles modeling feature from a commercial package, the potential to predict and later correct some casting defects was demonstrated. As a conclusion, the mold together with supply channels need to be carefully optimized in order to control the correct direction of solidification avoiding the appearance of oxides but also to prevent stripping the sand off the walls.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Lieb–Robinson Bounds for Multi–Commutators and Applications to Response Theory

  • Bru, J.-B.
  • de Siqueira Pedra, W.
We generalize to multi–commutators the usual Lieb–Robinson bounds for commutators. In the spirit of constructive QFT, this is done so as to allow the use of combinatorics of minimally connected graphs (tree expan- sions) in order to estimate time–dependent multi–commutators for interact- ing fermions. Lieb–Robinson bounds for multi–commutators are effective mathematical tools to handle analytic aspects of the dynamics of quantum particles with interactions which are non–vanishing in the whole space and possibly time–dependent. To illustrate this, we prove that the bounds for multi–commutators of order three yield existence of fundamental solutions for the corresponding non–autonomous initial value problems for observ- ables of interacting fermions on lattices. We further show how bounds for multi–commutators of order higher than two can be used to study linear and non–linear responses of interacting fermions to external perturbations. The results discussed here are also valid for quantum spins on lattices, with obvi- ous modifications. However, we only discuss the fermionic case in detail, in view of applications to microscopic quantum theory of electrical conduction discussed here and because this case is technically more involved.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Three Observations on Commutators of Singular Integral Operators with BMO Functions

  • Pérez, C.
  • Rivera-Ríos, I.P.
Three observations on commutators of Singular Integral Operators with BMO functions are exposed, namely 1 - The already known subgaussian local decay for the commutator, namely $\[\frac{1}{|Q|}\left|\left\{x\in Q\, : \, |[b,T](f\chi_Q)(x)|>M^2f(x)t\right\}\right|\leq c e^{-\sqrt{ct\|b\|_{BMO}}}\]$ is sharp, since it cannot be better than subgaussian. 2 - It is not possible to obtain a pointwise control of the commutator by a finite sum of sparse operators defined by $L\log L$ averages. 3 - Motivated by the conjugation method for commutators, it is shown the failure of the following endpoint estimate, if $w\in A_p\setminus A_1$ then $$\left\| wM\left(\frac{f}{w}\right)\right\|_{L^1(\mathbb{R}^n)\rightarrow L^{1,\infty}(\mathbb{R}^n)}=\infty.$$, MTM2012-30748
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Multi-objective Optimization of Orbit Transfer Trajectory Using Imperialist Competitive Algorithm

  • Shirazi, A.
This paper proposes a systematic direct approach to carry out effective multi-objective optimization of space orbit transfer with high-level thrust acceleration. The objective is to provide a transfer trajectory with acceptable accuracy in all orbital parameters while minimizing spacecraft fuel consumption. With direct control parameterization, in which the steering angles of thrust vector are interpolated through a finite number of nodes, the optimal control problem is converted into the parameter optimization problem to be solved by nonlinear programming. Besides the thrust vector direction angles, the thrust magnitude is also considered as variable and unknown along with initial conditions. Since the deviation of thrust vector in spacecraft is limited in reality, mathematical modeling of thrust vector direction is carried out in order to satisfy constraints in maximum deviation of thrust vector direction angles. In this modeling, the polynomial function of each steering angle is defined by interpolation of a curve based on finite number of points in a specific range with a nominal center point with uniform distribution. This kind of definition involves additional parameters to the optimization problem which results the capability of search method in satisfying constraint on the variation of thrust direction angles. Thrust profile is also modeled based on polynomial functions of time with respect to solid and liquid propellant rockets. Imperialist competitive algorithm is used in order to find optimal coefficients of polynomial for thrust vector and the optimal initial states within the transfer. Results are mainly affected by the degree of polynomials involved in mathematical modeling of steering angles and thrust profile which results different optimal initial states where the transfer begins. It is shown that the proposed method is fairly beneficial in the viewpoint of optimality and convergence. The optimality of the technique is shown by comparing the finite thrust optimization with the impulsive analysis. Comparison shows that the accuracy is acceptable with respect to fair precision in orbital elements and minimum fuel mass. Also, the convergence of the optimization algorithm is investigated by comparing the solution of the problem with other optimization techniques such as Genetic Algorithm. Results confirms the practicality of Imperialist Competitive Algorithm in finding optimum variation of thrust vector which results best transfer accuracy along with minimizing fuel consumption.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

A novel adaptive density-based ACO algorithm with minimal encoding redundancy for clustering problems

  • Villar-Rodriguez, E.
  • Gonzalez-Pardo, A.
  • Del Ser, J.
  • Bilbao, M.N.
  • Salcedo-Sanz, S.
In the so-called Big Data paradigm descriptive analytics are widely conceived as techniques and models aimed at discovering knowledge within unlabeled datasets (e.g. patterns, similarities, etc) of utmost help for subsequent predictive and prescriptive methods. One of these techniques is clustering, which hinges on different multi-dimensional measures of similarity between unsupervised data instances so as to blindly collect them in groups of clusters. Among the myriad of clustering approaches reported in the literature this manuscript focuses on those relying on bio-inspired meta-heuristics, which have been lately shown to outperform traditional clustering schemes in terms of convergence, adaptability and parallelization. Specifically this work presents a new clustering approach based on the processing fundamentals of the Ant Colony Optimization (ACO) algorithm, i.e. stigmergy via pheromone trails and progressive construction of solutions through a graph. The novelty of the proposed scheme beyond previous research on ACO-based clustering lies on a significantly pruned graph that not only minimizes the representation redundancy of the problem at hand, but also allows for an embedded estimation of the number of clusters within the data. However, this approach imposes a modified ant behavior so as to account for the optimality of entire paths rather than that of single steps within the graph. Simulation results over conventional datasets will evince the promising performance of our approach and motivate further research aimed at its applicability to real scenarios.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

A two-level finite element discretization of the streamfunction formulation of the stationary quasi-geostrophic equations of the ocean

  • Foster, E.L.
  • Iliescu, T.
  • Wells, D.R.
In this paper we proposed a two-level finite element discretization of the nonlinear stationary quasi-geostrophic equations, which model the wind driven large scale ocean circulation. Optimal error estimates for the two-level finite element discretization were derived. Numerical experiments for the two-level algorithm with the Argyris finite element were also carried out. The numerical results verified the theoretical error estimates and showed that, for the appropriate scaling between the coarse and fine mesh sizes, the two-level algorithm significantly decreases the computational time of the standard one-level algorithm.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Evolutionary algorithms to optimize low-thrust trajectory design in spacecraft orbital precession mission

  • Shirazi, A.
  • Ceberio, J.
  • Lozano, J.A.
In space environment, perturbations make the spacecraft lose its predefined orbit in space. One of these undesirable changes is the in-plane rotation of space orbit, denominated as orbital precession. To overcome this problem, one option is to correct the orbit direction by employing low-thrust trajectories. However, in addition to the orbital perturbation acting on the spacecraft, a number of parameters related to the spacecraft and its propulsion system must be optimized. This article lays out the trajectory optimization of orbital precession missions using Evolutionary Algorithms (EAs). In this research, the dynamics of spacecraft in the presence of orbital perturbation is modeled. The optimization approach is employed based on the parametrization of the problem according to the space mission. Numerous space mission cases have been studied in low and middle Earth orbits, where various types of orbital perturbations are acted on spacecraft. Consequently, several EAs are employed to solve the optimization problem. Results demonstrate the practicality of different EAs, along with comparing their convergence rates. With a unique trajectory model, EAs prove to be an efficient, reliable and versatile optimization solution, capable of being implemented in conceptual and preliminary design of spacecraft for orbital precession missions., IT-609-13 2013-2018, TIN2016-78365-R
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

The weighted independent domination problem: ILP model and algorithmic approaches

  • Davidson, P.P.
  • Blum, C.
  • Lozano, J.A.
This work deals with the so-called weighted independent domination problem, which is an N P -hard combinatorial optimization problem in graphs. In contrast to previous theoretical work from the liter- ature, this paper considers the problem from an algorithmic perspective. The first contribution consists in the development of an integer linear programming model and a heuristic that makes use of this model. Sec- ond, two greedy heuristics are proposed. Finally, the last contribution is a population-based iterated greedy algorithm that takes profit from the better one of the two developed greedy heuristics. The results of the compared algorithmic approaches show that small problem instances based on random graphs are best solved by an efficient integer linear programming solver such as CPLEX. Larger problem instances are best tackled by the population-based iterated greedy algorithm. The experimental evaluation considers random graphs of different sizes, densities, and ways of generating the node and edge weights.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Nature-inspired approaches for distance metric learning in multivariate time series classification

  • Oregui, I.
  • Del Ser, J.
  • Pérez, A.
  • Lozano, J.A.
The applicability of time series data mining in many different fields has motivated the scientific community to focus on the development of new methods towards improving the performance of the classifiers over this particular class of data. In this context the related literature has extensively shown that dynamic time warping is the similarity measure of choice when univariate time series are considered. However, possible statistical coupling among different dimensions make the generalization of this metric to the multivariate case all but obvious. This has ignited the interest of the community in new distance definitions capable of capturing such inter-dimension dependences. In this paper we propose a simple dynamic time warping based distance that finds the best weighted combination between the dependent - where multivariate time series are treated as whole - and independent approaches - where multivariate time series are just a collection of unrelated univariate time series - of the time series to be classified. A benchmark of four heuristic wrappers, namely, simulated annealing, particle swarm optimization, estimation of distribution algorithms and genetic algorithms are used to evolve the set of weighting coefficients towards maximizing the cross-validated predictive score of the classifiers. In this context one of the most recurring classifiers is nearest neighbor. This classifier is couple with a distance that as afore mentioned, in most cases, have been dynamic time warping. The performance of the proposed approach is validated over datasets widely utilized in the related literature, from which it is concluded that the obtained performance gains can be enlarged by properly decoupling the influence of each dimension in the definition of the dependent dynamic time warping distance.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Discretizations of the spectral fractional Laplacian on general domains with Dirichlet, Neumann, and Robin boundary conditions

  • Cusimano, N.
  • Del Teso, F.
  • Gerardo-Giorda, L.
  • Pagnini, G.
In this work, we propose novel discretisations of the spectral fractional Laplacian on bounded domains based on the integral formulation of the operator via the heat-semigroup formalism. Specifically, we combine suitable quadrature formulas of the integral with a finite element method for the approximation of the solution of the corresponding heat equation. We derive two families of discretisations with order of convergence depending on the regularity of the domain and the function on which the fractional Laplacian is acting. Unlike other existing approaches in literature, our method does not require the computation of the eigenpairs of the Laplacian on the considered domain, can be implemented on possibly irregular bounded domains, and can naturally handle different types of boundary constraints. Various numerical simulations are provided to illustrate performance of the proposed method and support our theoretical results., FdT acknowledges support of Toppforsk project Waves and Nonlinear Phenomena (WaNP), grant no. 250070 from the Research Council of Norway. ERCIM ``Alain Benoussan" Fellowship programme
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

ICCS 2017 Workshop on Agent-Based Simulations, Adaptive Algorithms and Solvers

  • Byrski, A.
  • Paszynski, M.
  • Schaefer, R.
  • Calo, V.M.
  • Pardo, D.
This workshop seeks to integrate results from different domains of computer science, computational science, and mathematics. We welcome simulation papers, either hard simulations using finite element or finite difference methods, or soft simulations by means of evolutionary computations, and related methods. The workshop focuses on simulations performed by using (a) agent-oriented systems; or (b) adaptive algorithms. Simulations performed by other kind of systems are also welcome. An agent-oriented system seems are attractive tools useful for numerous domains of applications. Adaptive algorithms significantly decrease on the computational cost by investing computational resources when needed by the problem.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Nature-inspired approaches for distance metric learning in multivariate time series classification

  • Oregui, I.
  • Del Ser, J.
  • Pérez, A.
  • Lozano, J.A.
The applicability of time series data mining in many different fields has motivated the scientific community to focus on the development of new methods towards improving the performance of the classifiers over this particular class of data. In this context the related literature has extensively shown that dynamic time warping is the similarity measure of choice when univariate time series are considered. However, possible statistical coupling among different dimensions make the generalization of this metric to the multivariate case all but obvious. This has ignited the interest of the community in new distance definitions capable of capturing such inter-dimension dependences. In this paper we propose a simple dynamic time warping based distance that finds the best weighted combination between the dependent – where multivariate time series are treated as whole – and independent approaches – where multivariate time series are just a collection of unrelated univariate time series – of the time series to be classified. A benchmark of four heuristic wrappers, namely, simulated annealing, particle swarm optimization, estimation of distribution algorithms and genetic algorithms are used to evolve the set of weighting coefficients towards maximizing the cross-validated predictive score of the classifiers. In this context one of the most recurring classifiers is nearest neighbor. This classifier is couple with a distance that as afore mentioned, in most cases, have been dynamic time warping. The performance of the proposed approach is validated over datasets widely utilized in the related literature, from which it is concluded that the obtained performance gains can be enlarged by properly decoupling the influence of each dimension in the definition of the dependent dynamic time warping distance.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Are the artificially generated instances uniform in terms of difficulty?

  • Pérez, A.
  • Ceberio, J.
  • Lozano, J.A.
In the field of evolutionary computation, it is usual to generate artificial benchmarks of instances that are used as a test-bed to determine the performance of the algorithms at hand. In this context, a recent work on permutation problems analyzed the implications of generating instances uniformly at random (u.a.r.) when building those benchmarks. Particularly, the authors analyzed instances as rankings of the solutions of the search space sorted according to their objective function value. Thus, two instances are considered equivalent when their objective functions induce the same ranking over the search space. Based on the analysis, they suggested that, when some restrictions hold, the probability to create easy rankings is higher than creating difficult ones. In this paper, we continue on that research line by adopting the framework of local search algorithms with the best improvement criterion. Particularly, we empirically analyze, in terms of difficulty, the instances (rankings) created u.a.r. of three popular problems: Linear Ordering Problem, Quadratic Assignment Problem and Flowshop Scheduling Problem. As the neighborhood system is critical for the performance of local search algorithms three different neighborhood systems have been considered: swap, interchange and insert. Conducted experiments reveal that (1) by sampling the parameters uniformly at random we obtain instances with a non-uniform distribution in terms of difficulty, (2) the distribution of the difficulty strongly depends on the pair problem-neighborhood considered, and (3) given a problem, the distribution of the difficulty seems to depend on the smoothness of the landscape induced by the neighborhood and on its size., Research Groups 2013-2018 (IT-609-13) TIN2016-78365-R(Spanish Ministry of Economy, Industry and Competitiveness)
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

On-Line Dynamic Time Warping for Streaming Time Series

  • Oregui, I.
  • Pérez, A.
  • Del Ser, J.
  • Lozano, J.A.
Dynamic Time Warping is a well-known measure of dissimilarity between time series. Due to its flexibility to deal with non-linear distortions along the time axis, this measure has been widely utilized in machine learning models for this particular kind of data. Nowadays, the proliferation of streaming data sources has ignited the interest and attention of the scientific community around on-line learning models. In this work, we naturally adapt Dynamic Time Warping to the on-line learning setting. Specifically, we propose a novel on-line measure of dissimilarity for streaming time series which combines a warp constraint and a weighted memory mechanism to simplify the time series alignment and adapt to non-stationary data intervals along time. Computer simulations are analyzed and discussed so as to shed light on the performance and complexity of the proposed measure.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Bayesian inference for algorithm ranking analysis

  • Calvo, B.
  • Ceberio, J.
  • Lozano, J.A.
The statistical assessment of the empirical comparison of algorithms is an essential step in heuristic optimization. Classically, researchers have relied on the use of statistical tests. However, recently, concerns about their use have arisen and, in many fields, other (Bayesian) alternatives are being considered. For a proper analysis, different aspects should be considered. In this work we focus on the question: what is the probability of a given algorithm being the best? To tackle this question, we propose a Bayesian analysis based on the Plackett-Luce model over rankings that allows several algorithms to be considered at the same time
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Distance-based exponential probability models on constrained combinatorial optimization problems

  • Ceberio, J.
  • Mendiburu, A.
  • Lozano, J.A.
Estimation of distribution algorithms have already demonstrated their utility when solving a broad range of combinatorial problems. However, there is still room for methodological improvements when approaching constrained type problems. The great majority of works in the literature implement external repairing or penalty schemes, or use ad-hoc sampling methods in order to avoid unfeasible solutions. In this work, we present a new way to develop EDAs for this type of problems by implementing distance-based exponential probability models defined exclusively on the set of feasible solutions. In order to illustrate this procedure, we take the 2-partition balanced Graph Partitioning Problem as a case of study, and design efficient learning and sampling methods in order to use these distance-based probability models in EDAs.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Is minimising the convergence rate the best choice for efficient Optimized Schwarz preconditioning in heterogeneous coupling? The Stokes-Darcy case

  • Discacciati, M.
  • Gerardo-Giorda, L.
Optimized Schwarz Methods (OSM) are domain decomposition techniques based on Robin-type interface condition that have became increasingly popular in the last two decades. Ensuring convergence also on non-overlapping decompositions, OSM are naturally advocated for the heterogeneous coupling of multi-physics problems. Classical approaches optimize the coefficients in the Robin condition by minimizing the effective convergence rate of the resulting iterative algorithm. However, when OSM are used as preconditioners for Krylov solvers of the resulting interface problem, such parameter optimization does not necessarily guarantee the fastest convergence. This drawback is already known for homogeneous decomposition, but in the case of heterogeneous decomposition, the poor performance of the classical optimization approach becomes utterly evident. In this paper, we highlight this drawback for the Stokes/Darcy problem and we propose a more effective alternative optimization procedure., European Union Seventh Framework Programme (FP7/2007-2013; grant 294229) to M. Discacciati
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Simulation of the HarshLab floating platform for offshore experimentation using FEniCS-HPC

  • Moragues, M.
  • Castanon, D.
  • Jansson, J.
  • Nava, V.
  • Krishnasamy, E.
  • Degirmenci, N.C.
  • Nguyen, V.D.
  • Garrido, C.
  • Sanchez, M.
  • Rodriguez-Arias, R.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Effect of Tissue Elasticity in Cardiac Radiofrequency Catheter Ablation Models

  • Petras, A.
  • Leoni, M.
  • Guerra Ramos, J.M.
  • Jansson, J.
  • Gerardo-Giorda, L.
Radiofrequency catheter ablation (RFCA) is an effective treatment for different types of cardiac arrhythmias. However, major complications can occur, including thrombus formation and steam pops. We present a full 3D mathematical model for the radiofrequency ablation process that uses an open-irrigated catheter and accounts for the tissue deformation, an aspect overlooked by the existing literature. An axisymmetric Boussinesq solution for spherical punch is used to model the deformation of the tissue due to the pressure of the catheter tip at the tissue-catheter contact point. We compare the effect of the tissue deformation in the RFCA model against the use of a standard sharp insertion of the catheter in the tissue that other state-of- the-art RFCA computational models use., La Caixa 2016 PhD grant to M.L.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Computational Model for Prediction of the Occurrence of Steam Pops during Irrigated Radiofrequency Catheter Ablation

  • González-Suárez, A.
  • Berjano, E.
  • Guerra Ramos, J.M.
  • Gerardo-Giorda, L.
Radiofrequency catheter ablation (RFCA) is a curative treatment for cardiac arrhythmias. Although globally a pretty safe procedure, it may present some risk. Steam pop is a serious complication that can occur during RFCA with irrigated electrodes. Pops are caused by tissue overheating above 89oC, and may cause explosive rupture of myocardial wall. Today, it is still very complicated to predict the occurrence and location of steam pops into the tissue during RFCA. Our aim was to use a computational model to address these issues considering two irrigated catheter tip designs and different power settings. The model has been validated against existing experimental results. Computational results show no evidence of significant differences in the incidence of steam pops between the two catheter designs. Steam pops appears at powers higher than 30W at approximately 2 mm depth under the electrode tip. Overall, the computational findings were in close agreement with previous experimental results, which suggests that the proposed model could be useful to predict the occurrence of steam pops in different clinical situations., MINECO TEC2014–52383-C3-R to E.B. and Generalitat Valenciana APOSTD/2016/045 to A.G.S.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Finite Element Simulations of Two-phase Flow and Floating Bodies Using FEniCS-HPC

  • Moragues, M.
  • Castanon, D.
  • Degirmenci, N.C.
  • Jansson, J.
  • Nava, V.
  • Krishnasamy, E.
  • Hoffman, J.
We present a variational multiscale stabilized finite element method to solve the variable density incompressible Navier-Stokes equations for the simulation of two-phase flow. We introduce a level-set method based on the compression technique similar to [1]. For the simulation of floating devices we make use of a simplified rigid body motion scheme and a deforming mesh approach [2]. The mesh deforms elastically following the movement of the body. An implicit turbulence model is used where turbulence is modelled by the numerical stabilization. The described methods are implemented in the open source software framework FEniCS-HPC [3] provided with an automated methodology for discretization and error control. We are working in a project for marine energy generation together with Tecnalia R&I. In this context we simulate floating platforms that will be used for marine energy generation or device experimentation in the ocean. The aim is to study the dynamics of this kind of off-shore devices. Our simulation results are compared against the experimental data obtained by Tecnalia R&I company in the experimental tank of CEHIPAR in Spain. We also participate in the IEA-OES Task 10 project where different simulations of floating bodies are carried out. The results are compared against other groups simulations that use different methodologies.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Centre-of-mass like superposition of Ornstein-Uhlenbeck processes: A pathway to non-autonomous stochastic differential equations and to fractional diffusion

  • D’Ovidio, M.
  • Vitali, S.
  • Sposini, V.
  • Sliusarenko, O.
  • Paradisi, P.
  • Castellani, G.
  • Pagnini, G.
We consider an ensemble of Ornstein–Uhlenbeck processes featuring a population of relaxation times and a population of noise amplitudes that characterize the heterogeneity of the ensemble. We show that the centre-of-mass like variable corresponding to this ensemble is statistically equivalent to a process driven by a non-autonomous stochastic differential equation with time-dependent drift and a white noise. In particular, the time scaling and the density function of such variable are driven by the population of timescales and of noise amplitudes, respectively. Moreover, we show that this variable is equivalent in distribution to a randomly-scaled Gaussian process, i.e., a process built by the product of a Gaussian process times a non-negative independent random variable. This last result establishes a connection with the so-called generalized grey Brownian motion and suggests application to model fractional anomalous diffusion in biological systems., ”Marco Polo Programme” (University of Bologna)
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Control of distributed parameter systems modelled by parabolic variational inequalities of the obstacle type

  • Kumar, R.
  • Glowinski, R.
  • Jansson, J.
We will investigate the numerical solution of the control problem modelled by parabolic variational inequalities. The general point of view adopted in this work has its roots in the work by R. Glowinski. The optimal control of parabolic variational inequalities is a hot topic in the control of distributed parameter system, since the classical optimality conditions such as KKT conditions do not apply and tools from non-smooth analysis have to be used. We demonstrate the simple approach to address optimal control of parabolic variational inequalities. First, we will introduce the model and describe the solution method. In Section 4 and 5, we will discuss the discretization of the model problem and then a conjugate gradient algorithm for solving the problem numerically. Finally we will present numerical results of optimal control problem related to variational inequality.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spin hall effect and weak antilocalization in graphene/transition metal dichalcogenide heterostructures

  • Garcia, Jose H.
  • Cummings, Aron W.
  • Roche, Stephan
Resumen del trabajo presentado al 1st Workshop Spain-Taiwan: "2D Materials and Interfaces for Spintronics", celebrado en Barcelona (España) del 23 al 25 de octubre de 2017., Since its discovery, graphene has been a promising material for spintronics: its low spin-orbit coupling, negligible hyperfine interaction, and high electron mobility, allow it to transport spin unaltered over long distances. However, the properties needed for such outstanding transport also prevent it from being useful for active spintronics, where strong spin-orbit coupling is needed to create and manipulate spin currents. In previous experimental studies, researchers have found evidences suggesting that spin-orbit coupling (SOC) can be enhanced by combining graphene with transition metal dichalcogenides. These observations were also supported by a theoretical prediction, where they show that these heterostructures present different types of spin-orbit interactions, a necessary prerequisite for the observation of spin Hall Effect and Weak Antilocalization. Using numerical simulations, we predict that measurable spin Hall Effect and Weak Antilocalization is possible in these heterostructures. Additionally, we explored the robustness of these effects against different types of disorder, founding an unexpected dependence with intervalley scattering. Finally we propose experimental guidelines for the observation of both effects., The authors acknowledge CERCA Programme / Generalitat de Catalunya, the Severo Ochoa Program (MINECO, Grant SEV-2013-0295), the Spanish Ministry of Economy and Competitiveness (MAT2012-33911), and Secretariá de Universidades e Investigación del Departamento de Economía y Conocimiento de la Generalidad de Cataluña. The authors also acknowledge the European Union Seventh Framework Program under grant agreement 604391 (Graphene Flagship). This work has been performed thanks to the computational resources awarded from PRACE and the Barcelona Supercomputing Center (Mare Nostrum), under Project No. 2015133194., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Graphene-based synthetic antiferromagnets: and ab-initio study

  • Cuadrado, Ramón
  • Ordejón, Pablo
  • Pruneda, Miguel
Resumen del póster presentado al 1st Workshop Spain-Taiwan: "2D Materials and Interfaces for Spintronics", celebrado en Barcelona (España) del 23 al 25 de octubre de 2017., By means of atomistic first principles calculations we have undertaken a structural, electronic and magnetic study of Fe/Gr/Co/Ir(111) hybrid graphene/magnetic structure using SIESTA DFT package. These kind of materials play a fundamental role in emerging graphene spintronic technologies such as those based in room-temperature long-spin lifetimes or tunnel magneto-resistance. The Fe-to-Graphene/Co/Ir binding mechanisms were investigated via the adsorption energy, charge transfer, density of states, and hybridisation analysis. We show theoretically that a strong perpendicular antiferromagnetic coupling can be established in ultrathin-film structures such as Fe/Gr/Co on Ir(111). To this respect Graphene acts not only as a mere spacer but has a direct role in sustaining antiferromagnetic super exchange-coupling between the Fe and Co magnetic layers by means of the hybridisation between Co-3d and Gr’s pz states. In addition, the calculated magnetocrystalline anisotropy values are in good agreement with the experiments., The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295). RC also acknowledges the funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodoswa-Curie grant agreement no. 665919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanophotonic interferometric immunosensor for label-free and real-time monitoring of Irgarol 1051 in sea water

  • Chocarro Ruiz, Blanca
  • Lechuga, Laura M.
Resumen del trabajo presentado al BRAAVOO Marine Biosensors Workshop, celebrado en Villars-sur-Ollon (Gryon-Suiza) del 24 al 25 de noviembre de 2016., Every year large quantities of wastes and pollutants are dumped in the sea contributing to a slow but constant degradation of the marine water quality. Conventional analytical methodologies are sensitive and selective tools for the sea quality control but they operate only at laboratory settings. Bringing the monitoring tools directly to the contaminated place can result in cost and time savings. In the frame of the BRAAVOO project, we are developing a nanoimmunosensor module for the on-site analysis of sea pollutants. One of these pollutants is Irgarol 1051, a commonly used antifouling paint for marine vessels. Because of its biocidal effect, its presence in the marine environment has a negative impact on marine organisms like corals. We are developing a bimodal waveguide interferometer (BiMW) nano-immunosensor for real-time and label-free detection of Irgarol 1051. The detection is based on a competitive inhibition format assay using a hapten with a similar structure to Irgarol, but with a carboxylic group which can be covalently attached to the sensor surface. Results show limits of detection of few ng/L and the stability of the sensor surface up to 30 measure-regeneration cycles with sea water samples. Each measure-regeneration cycle takes 15 minutes and the sample does not require any pre-treatment., This work has been funded by the 7FP (EU, BRAAVOO Grant Agreement No 614010). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Continuous monitoring of tip radius during atomic force microscopy imaging

  • Fraxedas, J.
  • Perez Murano, Francesc X.
  • Gramazio, Federico
  • Lorenzoni, Matteo
  • Rull, Enrique
  • Staufer, Urs
Resumen del trabajo presentado al Scanning Microscopies, celebrado en Monterey, California (US) del 29 de septiembre al 1 de octubre de 2015., We present a continuous tip monitoring method during atomic force microscopy imaging based on the use of higher harmonics, which are generated in the repulsive regime as a result of the nonlinear interactions between the cantilever tip and the surface under study. We have applied this method to commercial rectangular microfabricated silicon cantilevers with force constants in the 45 N/m range and fundamental frequencies in the 300-400 kHz range and with tip radii below 10 nm. We have focused in the resonance of the 2nd flexural mode and the 6th harmonic using polystyrene surfaces. The simultaneous acquisition of topographic and higher harmonic images allows a continuous control of the state of the tip. The experimental results have been rationalized with computer simulations taking into account both the cantilever dynamics and the tip-surface interactions., This project is supported by the EC through a grant with contract Nr. 309558 within the 7th Framework Program NMP Call 2012.1.4-3 on Nanoscale mechanical metrology for industrial processes and products. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. IMB-CNM, CSIC acknowledges the grant CSD2010-00024., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermal conductivity and air-mediated losses in periodic porous silicon membranes at high temperatures

  • Graczykowski, Bartlomiej
  • Sachat, Alexandros el
  • Reparaz, J. S.
  • Sledzinska, Marianna
  • Wagner, M. R.
  • Chávez-Angel, Emigdio
  • Volz, Sebastian
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
Resumen del trabajo presentado a la NanoTech Poland International Conference and Exhibition, celebrada en Poznán (Polonia) del 1 al 3 de junio de 2017., Progress in the last few decades in nano-scale thermal transport has enabled a significant degree of control over heat and sound propagation by lattice vibrations - phonons. The latest investigations on the thermal properties of silicon, the most common material in electronics, micro- and nano-electro-mechanical systems (MEMS and NEMS) and photonics, have pointed to nanostructuring as a highly efficient approach to acoustic phonon engineering. Heat conduction in silicon can be effectively engineered by means of submicrometer porous thin free-standing membranes. Tunable thermal properties make these structures good candidates for integrated heat management units such as waste heat recovery, rectification or efficient heat dissipation. However, possible applications require detailed thermal characterization at high temperatures which, up to now, has been an experimental challenge. In this work we use the contactless two-laser Raman thermometry to study heat dissipation in periodic porous membranes at high temperatures via lattice conduction and air-mediated losses. We find the reduction of the thermal conductivity and its temperature dependence closely correlated with the structure feature size. Based on two-phonon Raman spectra, we attribute this behavior to diffuse (incoherent) phononboundary scattering. Furthermore, we investigate and quantify the heat dissipation via natural air-mediated cooling, which can be tuned by engineering the porosity., The authors acknowledge the financial support from the FP7 project MERGING (Grant No. 309150) and QUANTIHEAT (Grant No 604668); the Spanish MINECO projects nanoTHERM (Grant No. CSD2010- 595 0044) and PHENTOM (FIS2015-70862-P) and the program Severo Ochoa (Grant SEV-2013-0295). B.G. acknowledges the support from the Homing Programme (Homing/2016-1/2) granted by the Foundation for Polish Science., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Novel (coordination) polymer nanoparticles for advanced theranostics

  • Novio, Fernando
  • Lorenzo, Julia
  • Nador, Fabiana
  • Suárez-García, Salvio
  • Montpeyó, David
  • Ruiz Molina, Daniel
Resumen del trabajo presentado a la NanoTech Poland International Conference and Exhibition, celebrada en Poznán (Polonia) del 1 al 3 de junio de 2017., Recently, nanoscale coordination polymer particles (CPPs) have emerged as an alternative platform to provide new opportunities for engineering multifunctional systems with applications in drug delivery and/or biomedical imaging. In general, CPPs exhibit high metal ion payloads content, high biocompatibility, low toxicity and offer the possibility to harbor additional functions. The pre-synthetic design strategies like judicious choice of metal ions and ligands can address the challenges of synthesizing such functional materials. Moreover, the ability to incorporate diverse metals useful for MRI nd/or fluorescence allows constructing novel contrast agents for biomedical imaging. In this communication we will revise the different approaches developed in the group with this aim., This work was supported by project MAT2015-70615-R from the Spanish Government and FEDER funds. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). NNA thanks EU for Marie Curie Intra-European Fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanoparticle/nanochannel based sensing systems for neuroblastoma biomarkers detection on plastic and paper platforms

  • Escosura-Muñiz, Alfredo de la
  • Espinoza-Castañeda, Marisol
  • Chamorro-García, Alejandro
  • Rodríguez-Hernández, Carlos J.
  • Torres, Carmen de
  • Merkoçi, Arben
Resumen del trabajo presentado al VIII International Congress on Analytical Nanoscience and Nanotechnology, celebrado en Barcelona (España) del 3 al 5 de julio de 2017., Neuroblastoma (NB) is a childhood cancer of the peripheral nervous system. It affects 10.2 per million children under 15 years of age, and it is the most frequent type of cancer in the first year of life. Despite all the efforts in new therapies, overall survival rates remaining below 40%. Besides, long term survivors suffer from secondary effects inflicted by current multimodal therapies on their normal, developing organs. In this context, there is an important medical need to develop devices for rapid quantification of circulating markers that allow for the precise evaluation of tumor evolution either spontaneous and/or in response to treatments. Parathyroid Hormone-like Hormone (PTHLH) is a cytokine that exerts relevant roles in normal tissues as well as in the initiation, progression and dissemination of several tumors. PTHLH is identified as a factor responsible for neuroblastomainduced hypercalcemia and it is known that circulating PTHLH is a useful marker to monitor the state of malignant-associated hypercalcemia and the effectiveness of treatment in cancer patients. However, there is a lack of specific, sensitive and widely available techniques to detect and quantify this protein. Methods used in hospitals are based on radioimmunoassays (RIAs), involving time consuming hazardous procedures which require sophisticated and expensive equipment and facilities. So point-of-care biosensors for PTHLH detection are strongly demanded by oncologists. In this context, we present here two different nanobiosensing approaches for the rapid and sensitive determination of PTHLH in physiological samples. The first approach is based on the use of solid-state nanoporous platforms in combination with electrochemical detection on screen-printed electrodes. Immunocomplex formation inside the nanoporous platforms leads to nanochannel blockage, which is electrochemically monitored and related to PTHLH concentration. The second methodology relies in a lateral-flow immunoassay (LFIA) using gold nanoparticle (AuNP) tags. Cell culture medium and cell lysates are evaluated with these systems, giving relevant information for understanding the factors that regulate the production and secretion of this protein by tumor cells, with potential interest for new therapies. PTHLH is also determined in human serum, being this data of great interest for diagnostics and for monitoring the effectiveness of therapies., ICN2 acknowledges support of the Spanish MINECO under projects MAT2014-52485-P and PCIN-2016-066 (“NACANCELL”) and through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. The Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya (Grant 2014 SGR 260) is also acknowledged. The authors also wish to acknowledge funding from the Spanish Ministry of Health (FIS PI14/ 00040 to CdT) and Fundació Privada Cellex., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Approximating the maximum weighted decomposable graph problem with applications to probabilistic graphical models

  • Pérez, Aritz
  • Blum, Christian
  • Lozano, Jose A.
Trabajo presentado en International Conference on Probabilistic Graphical Models (PGM 2018), celebrada en Praga (República Checa), del 11 al 14 de septiembre de2018, In this work we deal with the problem of learning a maximum weighted (k+1)-order decomposable graph coarser than a given maximal k-order decomposable graph (also known as hypertree of treewidth k − 1). An Integer Linear Programming formulation for the problem has recently been proposed and used in order to solve instances of the problem with a moderate number of vertices. However, as the problem is known to be NP-hard, it is of practical interest to develop approximate algorithms able to work with a limited amount of computational resources. In this paper we propose an approximate Integer Linear Programming formulation for the problem using a threshold distance which discards the edges that, on average, have a low probability of being contained in the solution. Experiments have been carried out with weighted graphs and probabilistic graphical models. Using the proposed formulation we have obtained results close to the optimum, even when most of the candidate edges were discarded using the distance criterion. The obtained good results indicate that the approximate formulation has important applications for learning probabilistic graphical models using decomposable scores, e.g., BDe, This work has been partially supported by the Basque Government through the BERC 2014-2017 and the ELKARTEK programs, and by the Spanish Ministry of Economy and Competitiveness MINECO: BCAM Severo Ochoa excellence accreditation SVP-2014-068574 and SEV-2013-0323, and through the project TIN2017-82626-R funded by (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the enhancement of the thermal conductivity of graphene-based nanofluids

  • Rodríguez-Laguna, María del Rocío
  • Sotomayor Torres, C. M.
  • Gómez-Romero, P.
  • Chávez-Angel, Emigdio
Trabajo presentado a la 18th International Conference on Nanotechnology (IEEE-NANO), celebrada en Cork (Irlanda) del 23 al 26 de julio de 2018., Heat transfer fluids have been extensively used in both low-temperature and high temperature applications (e.g. microelectronics cooling and concentrated solar power). However, their low thermal conductivity is still a limit on performance. One way to enhance thermal properties is to disperse nanomaterials, such as graphene flakes in the base fluid. In this work, we have developed highly stable DMAcgraphene nanofluids with enhanced thermal properties. Furthermore, the displacement of several Raman bands as a function of graphene concentration in DMAc suggests that the solvent molecules are able to interact with graphene surfaces strongly., We acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry (MINECO-FEDER MAT2015-68394-R NaCarFLOW) and PHENTOM (FIS2015-70862-P) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Atomic atom distribution of Ruthenium dispersed on a 2D covalent organic framework for electrocatalytic hydrogen evolution reaction

  • Liang, Zhifu
  • Wang, Xiang
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al nanoGe Fall Meeting, celebrado en Berlín (Alemania) del 4 al 8 de noviembre de 2019., In recent years, Single-atom catalysis (SAC) has become one of the most research hot topics in heterogeneous catalysis. As it is known, both homogeneous and heterogeneous catalysts are important for the reactions used in chemical industry. In homogeneous catalysis, up to 100% of the atoms may remain active during reactions, while for the in the case of heterogeneous catalysts, only a small fraction of the metal atoms can be utilized due to the aggregation of the atoms when forming clusters. In this way, SACs have the benefits of homogeneous and heterogeneous catalysts. In our case, we will use a 2D covalent organic framework (COF), which is a π-conjugated microporous polymer with a high stability, designability and crystallinity. In addition, contains a high number of pyridinic nitrogen which will not only be used for anchoring the metal atoms, but also as an active site for the catalytic reaction. Here we propose a single atom ruthenium catalysts on a 2D COF for improved electrocatalytic hydrogen evolution reaction., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Ciencia, Innovación y Universidades through the project SEHTOP (ENE 2016-77798-C4-3-R). This poster is funded by FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (ENE2017-85087-C3-3-R). Z.Liang. are grateful for financial support from Severo Ochoa Fellowship SEV-2013-0295. W Xiang and D Yang. thanks the China Scholarship Council. ICN2 is supported by the Severo Ochoa programme funded by AEI (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modulation of the TRPA1 ion channel by sigma-1 receptor

  • Peña, Elvira de la
  • Marcotti, Aida
  • Fernández-Trillo, Jorge
  • González, Alejandro
  • Gomis, Ana
  • Viana, Félix
Resumen del póster presentado al 49th Annual Meeting of the Society for Neuroscience, celebrado en Chicago (USA) del 19 al 23 de octubre de 2019., TRPA1 channels expressed in mammalian nociceptor endings play a critical role in chemonociception as a molecular sensors of reactive irritants, stress and tissue damage. Additionally, TRPA1 has been implicated in noxious cold and mechanical pain sensation. Sigma-1 receptor (σ-1R) is a chaperone mainly located in endoplasmic reticulum membrane, acting as an interoganelle signaling modulator that regulates the trafficking and function of different ionic channels. In the context of pain, pharmacological treatment of mice with the σ-1R antagonist, E-52862 (provided by ESTEVE PHARMACEUTICALS SA), produces antinociceptive effects, and has been shown to reduce the symptoms of neuropathic pain but the molecular mechanism is still unresolved. We studied the possible role of σ-1R in the modulation of TRPA1 channels and the result of this modulation on pain in mice. Measurement of intracellular calcium changes [Ca2+]i (FURA-2), and patch-clamp recordings were carried out in HEK-293 cells transfected with human TRPA1 (HEK-hTRPA1), and in cultured mouse DRG sensory neurons responsive to 50 µM AITC, a TRPA1 agonist. In both systems, incubation (4-24h) with E-52862 decreased significantly, in a dose dependent manner, the amplitude of [Ca2+]i responses evoked by AITC. Whole-cell membrane currents in HEK-hTRPA1 cells in response to AITC were also reduced, following incubation with the drug. In DRG sensory neurons the firing of action potentials, recorded in cell-attached mode, the membrane depolarization and the number of action potentials recorded in whole-cell current-clamp configuration evoked by AITC, were also significantly reduced following incubation with E-52862. In mice, we found that pain behaviors (licking, lifting and flickering) associated with TRPA1 activation by intraplantar injection of 10 mM AITC, decreased following intraperitoneal injection 24 h before of (40mg/kg) E-52862. These results implicate TRPA1 channels in the anti-nociceptive effects of σ-1R antagonists. All experimental procedures were carried out according to Spanish Royal Decree 1201/2005 and the ECC directive 2010/63/EU., Esteve Pharmaceuticals SA; SAF2016-77233-R co-financed by the European Regional Development Fund (ERDF); SEV- 2013-0317; GRISOLIA/2015/034., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Local activity in the dentate gruys and its propagation are controlled by VTA inputs

  • Pérez-Cervera, Laura
  • Cobos, Corinne
  • Álvarez Salvado, Efrén
  • Canals, Santiago
Trabajo presentado al 12th Federation of European Neuroscience Societies (FENS): Virtual Forum of NeuroScience, celebrado del 11 al 15 de julio de 2020., We acknowledge financial support from the Horizon2020 research and innovation programme (668863-SyBil-AA), the Spanish Ministerio de Economía y Competitividad (MINECO) and FEDER funds (PGC2018-101055-B-I00) and the State Research Agency, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (ref.SEV-2013-0317). L.P.C is supported by a FPI MEC student ship from MINECO (BES-2016-078460)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Vesicular dynamics and molecular machinery underlying social neuropeptides release

  • Aznar Escolano, Beatriz
  • Madrigal, M. Pilar
  • Jurado, Sandra
Trabajo presentado al 12th Federation of European Neuroscience Societies (FENS): Virtual Forum of NeuroScience, celebrado del 11 al 15 de julio de 2020., Funding Sources: R01AG049937 NIA NIH; Severo Ochoa Excellence Program SEV2013 0317; MINECO SAF2017 82524 R B. Aznar Escolano is funded by FPI PRE2018 083812 associated to SEV 2017 0723 18 3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of sex differences in response to olfactory social stimuli during aging

  • Portalés, Adrián
  • Jurado, Sandra
Trabajo presentado al 12th Federation of European Neuroscience Societies (FENS): Virtual Forum of NeuroScience, celebrado del 11 al 15 de julio de 2020., Funding Sources: R01AG049937 NIA NIH; Severo Ochoa Excellence Program SEV2013 0317; MINECO SAF2017 82524 R A. Portalés is funded by a FPI contract (BES2017 081243) associated to SEV2013 0317., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Role of Piezo2 channels in mechanical ocular pain

  • Fernández-Trillo, Jorge
  • Flórez-Paz, Danny
  • Íñigo-Portugués, Almudena
  • González-González, Omar
  • Gómez del Campo, Ana
  • González, Alejandro
  • Viana, Félix
  • Belmonte, Carlos
  • Gomis, Ana
Resumen del trabajo presentado al International Workshop on Chronic Pain and Itch: Mechanisms and Circuits, celebrado en Alicante (España) del 20 al 22 de octubre de 2021., Ministerio de Ciencia e Innovación, SAF2016-77233-R and PID2019-108194RB-100 co-financed by the European Regional Development Fund (ERDF), and the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2013-0317 and SEV-2017-0723., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structural and functional insights into TRPM8 modulation by the immunosuppressant macrolide Rapamycin

  • Oudaha, Khalid
  • Arcas, José Miguel
  • Peña, Elvira de la
  • Gomis, Ana
  • Sala, Salvador
  • Viana, Félix
Resumen del trabajo presentado al VIII Congreso Red Española de Canales Iónicos, celebrado en Alicante del 24 al 27 de mayo de 2022., Ministerio de Ciencia e Innovación, PID2019-108194RB-100 co-financed by the European Regional Development Fund (ERDF), the “Severo Ochoa” Program for Centers of Excellence in R&D SEV- 2017-0723 and predoctoral fellowships GRISOLIA/2019/089 and SEV-2013-0317., Peer reviewed