Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1407
Encontrada(s) 15 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Lu, Xuan|||0000-0003-2453-2805
  • Liang, Zhifu
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On-surface synthesis of porous graphene nanoribbons mediated by phenyl migration

  • Moreno, Cesar|||0000-0003-2682-211X
  • Diaz de Cerio, Xabier|||0000-0002-2389-1905
  • Tenorio Tuñas, Maria|||0000-0002-0632-1636
  • Gao, Fei
  • Vilas-Varela, Manuel|||0000-0002-6768-5441
  • Sarasola, Ane
  • Peña, Diego|||0000-0003-3814-589X
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Mugarza, Aitor|||0000-0002-2698-885X
Advancements in the on-surface synthesis of atomically precise graphene nanostructures are propelled by the introduction of innovative precursor designs and reaction types. Until now, the latter has been confined to cross-coupling and cyclization reactions that involve the cleavage of specific atoms or groups. In this article, we elucidate how the migration of phenyl substituents attached to graphene nanoribbons can be harnessed to generate arrays of [18]-annulene pores at the edges of the nanostructures. This sequential pathway is revealed through a comprehensive study employing bond-resolved scanning tunneling microscopy and ab-initio computational techniques. The yield of pore formation is maximized by anchoring the graphene nanoribbons at steps of vicinal surfaces, underscoring the potential of these substrates to guide reaction paths. Our study introduces a new reaction to the on-surface synthesis toolbox along with a sequential route, altogether enabling the extension of this strategy towards the formation of other porous nanostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Control of protein synthesis and memory by GluN3A-NMDA receptors through inhibition of GIT1/mTORC1 assembly

  • Conde-Dusman, María J.|||0000-0001-6841-2181
  • Dey, Partha N.
  • Elía-Zudaire, Óscar|||0000-0002-1396-834X
  • Rabaneda, Luis G 4
  • García-Lira, Carmen
  • Grand, Teddy
  • Briz, Victor|||0000-0001-6936-0918
  • Velasco, Eric R.
  • Andero Galí, Raül|||0000-0003-3641-8903
  • Niñerola, Sergio
  • Barco, Angel|||0000-0002-0653-3751
  • Paoletti, Pierre|||0000-0002-3681-4845
  • Wesseling, John F.
  • Gardoni, Fabrizio|||0000-0003-4598-5563
  • Tavalin, Steven J.|||0000-0001-7169-0932
  • Perez-Otaño, Isabel|||0000-0002-7222-8202
De novo protein synthesis is required for synapse modifications underlying stable memory encoding. Yet neurons are highly compartmentalized cells and how protein synthesis can be regulated at the synapse level is unknown. Here, we characterize neuronal signaling complexes formed by the postsynaptic scaffold GIT1, the mechanistic target of rapamycin (mTOR) kinase, and Raptor that couple synaptic stimuli to mTOR-dependent protein synthesis; and identify NMDA receptors containing GluN3A subunits as key negative regulators of GIT1 binding to mTOR. Disruption of GIT1/mTOR complexes by enhancing GluN3A expression or silencing GIT1 inhibits synaptic mTOR activation and restricts the mTOR-dependent translation of specific activity-regulated mRNAs. Conversely, GluN3A removal enables complex formation, potentiates mTOR-dependent protein synthesis, and facilitates the consolidation of associative and spatial memories in mice. The memory enhancement becomes evident with light or spaced training, can be achieved by selectively deleting GluN3A from excitatory neurons during adulthood, and does not compromise other aspects of cognition such as memory flexibility or extinction. Our findings provide mechanistic insight into synaptic translational control and reveal a potentially selective target for cognitive enhancement.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A high voltage solid state symmetric supercapacitor based on graphene-polyoxometalate hybrid electrodes with a hydroquinone doped hybrid gel-electrolyte

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Suarez-Guevara, Jullieth|||0000-0003-4570-7125
  • Tonti, Dino|||0000-0003-0240-1011
  • Enciso, Eduardo|||0000-0002-5536-2864
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
In pursuit of high capacitance and high energy density storage devices, hybrid materials have quickly garnered well-deserved attention based on their power to merge complementary components and properties. Here, we report the fabrication of all-solid state symmetric supercapacitors (ASSSC) based on a double hybrid approach combining a hybrid electrode (reduced graphene oxide-phoshomolybdate, rGO-PMo) and a hybrid electrolyte (hydroquinone doped gel-electrolyte). To begin with, a high-performance hybrid electrode based on HPMoO nanodots anchored onto rGO was prepared (rGO-PMo). Later, an all-solid state symmetric cell based on these rGO-PMo electrodes, and making use of a polymer gel-electrolyte was assembled. This symmetric cell showed a significant improvement in cell performance. Indeed, it allowed for an extended potential window by 0.3 V that led to an energy density of 1.07 mW h cm. Finally, we combined these hybrid electrodes with a hybrid electrolyte incorporating an electroactive species. This is the first proof-of-design where a redox-active solid-state gel-electrolyte is applied to rGO-PMo hybrid supercapacitors to accomplish a significant enhancement in the capacitance. Strikingly, a further excellent increase in the device performance (energy density of 1.7 mW h cm) was realized with the hybrid electrode-hybrid electrolyte combination cell as compared to that of the conventional electrolyte cell. Thus, this unique symmetric device outclasses the high-voltage asymmetric counterparts under the same power and represents a noteworthy advance towards high energy density supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Narrowing the Zero-Field Tunneling Resonance by Decreasing the Crystal Symmetry of Mn12 Acetate

  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Imaz, Inhar|||0000-0002-0278-1141
  • Chudnovsky, Eugene|||0000-0002-1880-3966
  • Tejada, Javier|||0000-0001-9246-5566
  • Zarzuela, Ricardo|||0000-0003-1765-1697
  • Statuto, Nahuel|||0000-0002-0062-760X
We report the discovery of a less symmetric crystalline phase of Mn acetate, a triclinic phase, resulting from recrystallizing the original tetragonal phase reported by Lis in acetonitrile and toluene. This new phase exhibits the same structure of Mn acetate clusters and the same positions of tunneling resonances on the magnetic field as the conventional tetragonal phase. However, the width of the zero-field resonance is at least 1 order of magnitude smaller - can be as low as 50 Oe - indicating very small inhomogeneous broadening due to dipolar and nuclear fields.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering Homochiral Metal-Organic Frameworks by Spatially Separating 1D Chiral Metal-Peptide Ladders, Tuning the Pore Size for Enantioselective Adsorption

  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Gómez, Laura
  • Imaz, Inhar|||0000-0002-0278-1141
  • Verdugo-Escamilla, Cristóbal|||0000-0003-2345-8359
  • Ribas, Xavi|||0000-0002-2850-4409
  • Maspoch, Daniel|||0000-0003-1325-9161
The reaction of the chiral dipeptide glycyl-L(S)-glutamate with Co<sup.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles, impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Torruella Besa, Pau|||0000-0002-6864-4000
  • Petrecca, Michele|||0000-0002-4895-0254
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puntes, Víctor|||0000-0001-8996-9499
  • Nogués, Josep|||0000-0003-4616-1371
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Diamond-coated silicon nanowires for enhanced micro-supercapacitor with ionic liquids

  • Gund, Girish S.|||0000-0002-2301-6051
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Aradilla, David|||0000-0002-8532-0323
  • Mueller-Sebert, Wolfgang
  • Bidan, Gérard
  • Gaboriau, D.
  • Gentile, Pascal|||0000-0002-1547-4247
  • Schubert, Thomas J. S.
  • Wimberg, Jan
  • Sadki, Saïd
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Silicon nanowires (SiNWs) and diamond-coated SiNWs (D@SiNWs) on highly n-doped silicon wafer substrates were prepared through standard chemical vapor deposition (CVD) method as electrodes for micro-supercapacitors. The surface of electrodes exhibited uniform distribution of SiNWs on silicon wafer and continuous diamond coating on SiNWs. Electrochemical measurements were carried out in order to test the combined effect of using Ionic Liquid electrolytes and diamond coating on SiNWs on energy storage performance. Optimal values of areal capacitance, energy density and power densities were 317 μF cm, 0.13 μWh cm and 150 μW cm, respectively. So, the work reported here confirms the suitability and compatibility of D@SiNWs electrode materials and ionic liquid electrolytes for the fabrication of high-performing and robust micro-supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Healing damaged coatings using friction-sensitive hybrid microcapsules

  • García Jimeno, Sonia|||0000-0003-3821-2714
  • Cano-Sarabia, Mary|||0000-0003-4254-8157
  • Mejias, Nereida
  • Navarro Bañón, Mª Virtudes
  • Frances, A.B.
  • Maspoch, Daniel|||0000-0003-1325-9161
A new healing surface coating technology based on the incorporation of hybrid melamine-formaldehyde-polyurethane (MF/PU) microcapsules which contain a healing mixture, into standard polyurethane surface coatings, is described. Microcapsules release the healing mixture upon surface scratching after mechanical damage.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lanthanide-organic framework nanothermometers prepared by spray-drying

  • Wang, Zhuopeng
  • Ananias, Duarte
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Brites, Carlos D. S.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Rocha, João
  • Carlos, Luís D.|||0000-0003-4747-6535
Accurate, noninvasive, and self-referenced temperature measurements at the submicrometer scale are of great interest, prompted by the ever-growing demands in the fields of nanotechnology and nanomedicine. The thermal dependence of the phosphor's luminescence provides high detection sensitivity and spatial resolution with short acquisition times in, e.g., biological fluids, strong electromagnetic fields, and fast-moving objects. Here, it is shown that nanoparticles of [(Tb0.914Eu0.086)2(PDA)3(H2O)]·2H2O (PDA = 1,4-phenylenediacetic acid), the first lanthanide-organic framework prepared by the spray-drying method, are excellent nanothermometers operating in the solid state in the 10-325 K range (quantum yield of 0.25 at 370 nm, at room temperature). Intriguingly, this system is the most sensitive cryogenic nanothermometer reported so far, combining high sensitivity (up to 5.96 ± 0.04% K-1 at 25 K), reproducibility (in excess of 99%), and low-temperature uncertainty (0.02 K at 25 K).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of texture in hybrid carbon-phosphomolybdic acid materials on their performance as electrodes in supercapacitors

  • Palomino, Pablo
  • Suarez-Guevara, Jullieth|||0000-0003-4570-7125
  • Olivares-Marín, Mara|||0000-0002-9797-7904
  • Ruiz Ruiz, Vanesa|||0000-0001-6657-2253
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Tonti, Dino|||0000-0003-0240-1011
  • Enciso, Eduardo|||0000-0002-5536-2864
In this paper, phosphomolybdic acid HPMoO (PMo) was anchored to four synthetic micro-mesoporous carbons and a commercial one to analyse the relationship between the porous texture of the support, the PMo adsorption and the performance of the resulting hybrid materials as electrodes in supercapacitors. The uptake of PMo on carbon supports follows a clear correlation with the micropore volume, which implies that PMo is mainly adsorbed in microporosity as a consequence of a greater confinement in this kind of pores instead of mesopores. Transmission electron microscopy indicates that the PMo adsorbed is homogeneously dispersed in the carbon texture. Finally, the addition of PMo to the original carbon electrodes provided capacitances up to 293 F per gram of electrode, substantially larger than the 206-240 F g of the unmodified activated carbon. This result represented an increase of up to 35% in terms of gravimetric energy density and 160% in terms of volumetric energy density, after PMo integration into the carbon matrix.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fully automated method for segmentation and classification of local field potential recordings. Preliminary results

  • Díaz-Parra, Antonio
  • Canals, S.
  • Moratal, David|||0000-0002-2825-3646
[EN] Identification of brain states measured with electrophysiological methods such as electroencephalography and local field potential (LFP) recordings is of great importance in numerous neuroscientific applications. For instance, in Brain Computer Interface, in the diagnosis of neurological disorders as well as to investigate how brain rhythms stem from synchronized physiological mechanisms (e.g., memory and learning). In this work, we propose a fully automated method with the aim of partitioning LFP signals into stationary segments as well as classifying each detected segment into three different classes (delta, regular theta or irregular theta rhythms). Our approach is computationally efficient since the process of detection and partition of signals into stationary segments is only based on two features (the variance and the so-called spectral error measure) and allow the classification at the same time. We developed the algorithm upon analyzing six anesthetized rats, resulting in a true positive rate of 97.5%, 91.8% and 79.1% in detecting delta, irregular theta and regular theta rhythms, respectively. This preliminary quantitative evaluation offers encouraging results for further research., Research supported by the Spanish Ministerio de Economia y Competitividad (MINECO) under grants BFU2015-64380-C2-1-R and BFU2015-64380-C2-2R and European Union's Horizon 2020 research and innovation programme under grant agreement No 668863 (SyBil-AA). Santiago Canals acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV- 2013-0317). Antonio Diaz-Parra is funded by the Spanish Ministerio de Educacion, Cultura y Deporte (MECD) under grant FPU13/01475.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

TherMouseDuino: An affordable Open-Source temperature control system for functional magnetic resonance imaging experimentation with mice

  • Quiñones, Darío R.
  • Fernández-Mollá, Luis Miguel
  • Pacheco-Torres, Jesús
  • Caramés, José M.
  • Canals, Santiago
  • Moratal, David|||0000-0002-2825-3646
[EN] Introduction: Functional magnetic resonance imaging (fMRI) is one of the most highly regarded techniques in the neuroimaging field. This technique is based on vascular responses to neuronal activation and is extensively used in clinical and animal research studies. In preclinical settings, fMRI is usually applied to anesthetized animals. However, anesthetics cause alterations, e.g. hypothermia, in the physiology of the animals and this has the potential to disrupt fMRI signals. The current temperature control method involves a technician, as well as monitoring the acquisition MRI sequences, also controlling the temperature of the animal; this is inefficient. Methods: In order to avoid hypothermia in anesthetized rodents an Open-Source automatic temperature control device is presented. It takes signals from an intrarectal temperature sensor, as well as signals from a thermal bath, which warms up the body of the animal under study, in order to determine the mathematical model of the thermal response of the animal. Results: A Proportional-Integral-Derivative (PID) algorithm, which was discretized in an Arduino micro-controller, was developed to automatically keep stable the body temperature of the animal under study. The PID algorithm has been shown to be accurate in preserving the body temperature of the animal. Conclusion: This work presents the TherMouseDuino. It is an Open-Source automatic temperature control system and reduces temperature fluctuations, thus providing robust conditions in which to perform fMRI experiments. Furthermore, our device frees up the technician to focus solely on monitoring the MRI sequences., This work was supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-2-R (D.M.) and BFU2015-64380-C2-1-R and EU Horizon 2020 Program 668863-SyBil-AA grant (S.C.). S.C. acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV-2013-0317). D.R.Q. was supported by grant "Ayudas para la formation de personal investigador (FPI)" from the Vicerrectorado de Investigation, Innovation y Transferencia of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Tangible Educative 3D Printed Atlas of the Rat Brain

  • Quiñones, Darío R.
  • Ferragud-Agulló, Jorge
  • Canals-Gamoneda, Santiago
  • Pérez Feito, Ricardo|||0000-0002-8428-9395
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
  • Moratal, David|||0000-0002-2825-3646
[EN] In biology and neuroscience courses, brain anatomy is usually explained using Magnetic Resonance (MR) images or histological sections of different orientations. These can show the most important macroscopic areas in an animals¿ brain. However, this method is neither dynamic nor intuitive. In this work, an anatomical 3D printed rat brain with educative purposes is presented. Hand manipulation of the structure, facilitated by the scale up of its dimensions, and the ability to dismantle the ¿brain¿ into some of its constituent parts, facilitates the understanding of the 3D organization of the nervous system. This is an alternative method for teaching students in general and biologists in particular the rat brain anatomy. The 3D printed rat brain has been developed with eight parts, which correspond to the most important divisions of the brain. Each part has been fitted with interconnections, facilitating assembling and disassembling as required. These solid parts were smoothed out, modified and manufactured through 3D printing techniques with poly(lactic acid) (PLA). This work presents a methodology that could be expanded to almost any field of clinical and pre-clinical research, and moreover it avoids the need for dissecting animals to teach brain anatomy., This work was supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-2-R (D.M.) and BFU2015-64380-C2-1-R and EU Horizon 2020 Program 668863-SyBil-AA grant (S.C.). S.C. acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV-2013-0317). D.R.Q. was supported by grant "Ayudas para la formacion de personal investigador (FPI)" from the Vicerrectorado de Investigacion, Innovacion y Transferencia of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RATT: RFID Assisted Tracking Tile. Preliminary results

  • Quiñones, Darío R.
  • Cuevas-López, Aarón
  • Cambra-Enguix J.
  • Canals-Gamoneda, Santiago
  • Moratal, David|||0000-0002-2825-3646
[EN] Behavior is one of the most important aspects of animal life. This behavior depends on the link between animals, their nervous systems and their environment. In order to study the behavior of laboratory animals several tools are needed, but a tracking tool is essential to perform a thorough behavioral study. Currently, several visual tracking tools are available. However, they have some drawbacks. For instance, when an animal is inside a cave, or is close to other animals, the tracking cameras cannot always detect the location or movement of this animal. This paper presents RFID Assisted Tracking Tile (RATT), a tracking system based on passive Radio Frequency Identification (RFID) technology in high frequency band according to ISO/IEC 15693. The RATT system is composed of electronic tiles that have nine active RFID antennas attached; in addition, it contains several overlapping passive coils to improve the magnetic field characteristics. Using several tiles, a large surface can be built on which the animals can move, allowing identification and tracking of their movements. This system, that could also be combined with a visual tracking system, paves the way for complete behavioral studies., Research supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-2-R and BFU2015-64380-C2-1-R. Santiago Canals acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV-2013-0317). Dario R. Quinones is supported by grant Ayudas para la formacion de personal investigador (FPI) from Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical modulation of coherent phonon emission in optomechanical cavities

  • Maire, Jeremie
  • Arregui, Guillermo
  • Capuj, Nestor E.
  • Colombano, Martín F.
  • Sotomayor-Torres, Clivia M.
  • Navarro-Urrios, Daniel
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical (OM) structures are well suited to study photon-phonon interactions, and they also turn out to be potential building blocks for phononic circuits and quantum computing. In phononic circuits, in which information is carried and processed by phonons, OM structures could be used as interfaces to photons and electrons thanks to their excellent coupling efficiency. Among the components required for phononic circuits, such structures could be used to create coherent phonon sources and detectors, but more complex functions remain challenging. Here, we propose and demonstrate a way to modulate the coherent phonon emission from OM crystals by a photothermal effect induced by an external laser, effectively creating a phonon switch working at ambient conditions of pressure and temperature and the working speed of which is only limited by the build-up time of the mechanical motion of the OM structure. We additionally demonstrate two other modulation schemes: modulation of harmonics in which the mechanical mode remains active but different harmonics of the optical force are used, and modulation to and from a chaotic regime. Furthermore, due to the local nature of the photothermal effect used here, we expect this method to allow us to selectively modulate the emission of any single cavity on a chip without affecting its surroundings in the absence of mechanical coupling between the structures, which is an important step toward freely controllable networks of OM phonon emitters. (c) 2018 Author(s)., This work was supported by the European Comission FET Open project PHENOMEN (No. H2020-EU-713450) and the Spanish MINECO project PHENTOM (No. FIS2015-70862-P). The ICN2 is funded by the CERCA programme, the Generalitat de Catalunya, and supported by the Severo Ochoa programme of the Spanish MINECO Grant No. SEV-2013-0295. D.N.U. and M.F.C. gratefully acknowledge the support of a Ramon y Cajal postdoctoral fellowship (No. RYC-2014-15392) and a Severo Ochoa studentship, respectively. The authors thank F. Alzina for fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methane hydrate formation in confined nanospace can surpass nature

  • Casco, M.E.
  • Silvestre Albero, Joaquin
  • Ramirez-Cuesta, A.J.
  • Bansode, A.
  • Urakawa, A.
  • Peral, I.
  • Martinez-Escandell, M.
  • Kaneko, K.
  • Rodríguez Reinoso, Francisco
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
Natural methane hydrates are believed to be the largest source of hydrocarbons on Earth. These structures are formed in specific locations such as deep-sea sediments and the permafrost based on demanding conditions of high pressure and low temperature. Here we report that, by taking advantage of the confinement effects on nanopore space, synthetic methane hydrates grow under mild conditions (3.5 MPa and 2 degrees C), with faster kinetics (within minutes) than nature, fully reversibly and with a nominal stoichiometry that mimics nature. The formation of the hydrate structures in nanospace and their similarity to natural hydrates is confirmed using inelastic neutron scattering experiments and synchrotron X-ray powder diffraction. These findings may be a step towards the application of a smart synthesis of methane hydrates in energy-demanding applications (for example, transportation)., We acknowledge UK Science and Technlology Facilities Council for the provision of beam time on the TOSCA spectrometer (Projects RB1410624 and RB122099) and financial support from the European Commission under the 7th Framework Programme through the 'Research Infrastructures' action of the 'Capacities' Programme (NMI3-II Grant number 283883). J.S.-A. and F.R. acknowledges the financial support from MINECO: Strategic Japanese-Spanish Cooperation Program (PLE2009-0052), Concert Project-NASEMS (PCIN-2013-057) and Generalitat Valenciana (PROMETEO/2009/002). F.R. and J.L.J. thank the financial support from MINECO (MAT2012-38567-C02-01, Consolider Ingenio 2010-Multicat CSD-2009-00050 and SEV-2012-0267). K.K. thanks Grant-in-Aid for Scientific Research (A) (2424-1038), Japan. A.B. and A.U. thank the financial support from MINECO (SEV-2013-0319). J.L.J. and I.P. thank synchrotron ALBA for beamtime availability.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational Modeling of Open-Irrigated Electrodes for Radiofrequency Cardiac Ablation Including Blood Motion-Saline Flow Interaction

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
  • Guerra, Jose M.
  • Gerardo-Giorda, Luca
[EN] Radiofrequency catheter ablation (RFCA) is a routine treatment for cardiac arrhythmias. During RFCA, the electrode-tissue interface temperature should be kept below 80°C to avoid thrombus formation. Open-irrigated electrodes facilitate power delivery while keeping low temperatures around the catheter. No computational model of an open-irrigated electrode in endocardial RFCA accounting for both the saline irrigation flow and the blood motion in the cardiac chamber has been proposed yet. We present the first computational model including both effects at once. The model has been validated against existing experimental results. Computational results showed that the surface lesion width and blood temperature are affected by both the electrode design and the irrigation flow rate. Smaller surface lesion widths and blood temperatures are obtained with higher irrigation flow rate, while the lesion depth is not affected by changing the irrigation flow rate. Larger lesions are obtained with increasing power and the electrode-tissue contact. Also, larger lesions are obtained when electrode is placed horizontally. Overall, the computational findings are in close agreement with previous experimental results providing an excellent tool for future catheter research., This work was supported in part by the Basque Government through the BERC 2014-2017 program and by Spanish Ministry of Economy and Competitiveness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013-0323, and also by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3-R (TEC2014-52383-C3-1-R) and Grant MTM201569992-R. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. This work was supported in part by the Basque Government through the BERC 2014-2017 program and by Spanish Ministry of Economy and Competitiveness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013-0323, and also by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3-R (TEC2014-52383-C3-1-R) and Grant MTM2015-69992-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A SIR-based model for contact-based messaging applications supported by permanent infrastructure

  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo-Arcila, Marina
[EN] In this paper, we focus on the study of coupled systems of ordinary differential equations (ODEs) describing the diffusion of messages between mobile devices. Communications in mobile opportunistic networks take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. SIR (Sane, Infected, Recovered) models permit to represent the diffusion of messages using an epidemiological based approach. The question we analyse in this work is whether the coexistence of a fixed infrastructure can improve the diffusion of messages and thus justify the additional costs. We analyse this case from the point of view of dynamical systems, finding and characterising the admissible equilibrium of this scenario. We show that a centralised diffusion is not efficient when people density reaches a sufficient value. This result supports the interest in developing opportunistic networks for occasionally crowded places to avoid the cost of additional infrastructure., This work was partially supported by Ministerio de Economia y Competitividad, Spain (Grants TEC2014-52690-R, MTM2016-75963-P & BCAM Severo Ochoa excellence accreditation SEV-2013-0323), Generalitat Valenciana, Spain (Grants AICO/2015/108, ACOMP/2015/005, GVA/2018/110), by the Basque Government through the BERC 2014-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Developing preclinical devices for neuroscience research in the fields of animal tracking, fMRI acquisition, and 3D histology cutting

  • Quiñones Colomer, Darío Rubén
[ES] La neurociencia es un campo que abarca muchas especialidades. El objetivo de esta tesis es subsanar algunas carencias tecnológicas que existen en los métodos actuales de experimentación animal en neurociencia. En esta tesis, se presentan seis proyectos, que tendrán como objetivo mejorar el "Principio de las tres R", el cual fue enunciado por los biólogos ingleses W. M. S. Russell y R. L. Burch, durante la experimentación animal. El comportamiento es uno de los aspectos más importantes de la vida animal. Depende de los vínculos entre los animales, sus sistemas nerviosos y sus entornos. Para estudiar el comportamiento de los animales de laboratorio, se necesitan varias herramientas, pero una herramienta de seguimiento es esencial para llevar a cabo un estudio de comportamiento exhaustivo. Varias herramientas de seguimiento visual están actualmente disponibles. Sin embargo, todas tienen algunos inconvenientes. Por ejemplo, en una situación en la que un animal está dentro de una madriguera o cerca de otros animales, las cámaras de rastreo (tracking) no siempre pueden detectar la ubicación precisa o el movimiento del animal. Por esta razón, los entornos enriquecidos para intentar recrear el hábitat natural de los animales en experimentación no pueden utilizarse, ya que los datos recopilados son insuficientes/inexactos. Con la finalidad de mejorar los experimentos de tracking RFID Assisted Tracking Tile (RATT) es presentado en esta tesis. RATT es un sistema de seguimiento basado en tecnología de identificación pasiva de radiofrecuencia (RFID) y está compuesto por baldosas electrónicas con las que se puede construir una gran superficie, sobre la cual los animales pueden moverse libremente. Esto permite la identificación más precisa de los animales, así como el seguimiento de sus movimientos. Este sistema, que también se puede combinar con un sistema de seguimiento con cámaras, allana el camino para estudios completos de comportamiento en entornos enriquecidos. Dada la capacidad de rastrear animales y, por lo tanto, realizar experimentos de comportamiento exhaustivos, es posible observar cómo se comportan los sujetos desde un punto de vista externo. Sin embargo, si queremos comprender lo que sucede en el cerebro de estos sujetos, es necesario aplicar otras técnicas de análisis, por ejemplo, el estudio de señales dependientes del nivel de oxígeno en la sangre (BOLD, por sus siglas en inglés). Las señales BOLD se basan en las respuestas vasculares a la activación neuronal y se utilizan ampliamente en estudios de investigación clínicos y preclínicos. En entornos preclínicos, los animales suelen ser anestesiados. Sin embargo, los anestésicos causan cambios en la fisiología de los animales, p. Ej. hipotermia, y esto tiene el potencial de alterar las señales funcionales de MRI (fMRI). Para evitar la hipotermia en roedores anestesiados, se presenta TherMouseDuino. Este es un sistema de control automático de temperatura de código abierto, que reduce las fluctuaciones de la temperatura, lo que proporciona condiciones sólidas para realizar experimentos de resonancia magnética funcional. En los cursos de biología y neurociencia, la anatomía del cerebro se enseña generalmente utilizando imágenes de resonancia magnética (IRM) o secciones histológicas de diferentes planos. Estos muestran las áreas macroscópicas más importantes en el cerebro de un animal. Sin embargo, este método no es dinámico ni intuitivo. En esta tesis se presenta un cerebro de rata impreso en 3D con fines educativos. La manipulación manual de la estructura, facilitada por la ampliación de sus dimensiones, junto con la capacidad de desmontar el "cerebro" en algunas de sus partes principales, facilita la comprensión de la organización 3D del sistema nervioso. Este es un método alternativo y mejorado para enseñar a los estudiantes en general y a los biólogos, en particular, la anatomía del cerebro de rata., [CA] La neurociència és un camp que abasta moltes especialitats. L'objectiu d'aquesta tesi és esmenar algunes manques tecnològiques que existeixen en els mètodes actuals d'experimentació animal en neurociència. En aquesta tesi, es presenten sis projectes, que tindran com a objectiu millorar el "Principi de les tres R", el qual va ser enunciat pels biòlegs anglesos W. M. S. Russell i R. L. Burch, durant l'experimentació animal. El comportament és un dels aspectes m'és importants de la vida animal. Depèn dels vincles entre els animals, els seus sistemes nerviosos i els seus entorns. Per estudiar el comportament dels animals de laboratori, es necessiten diverses eines, però` una eina de seguiment és essencial per a dur a terme un estudi de comportament exhaustiu. Diverses eines de seguiment visual estan actualment disponibles. No obstant això, totes tenen alguns inconvenients. Per exemple, en una situació en la qual un animal esta` dins d'un cau o prop d'altres animals, les cambres de rastreig (tracking) no sempre poden detectar la ubicació precisa o el moviment de l'animal. Per aquesta raó, els entorns enriquits per a intentar recrear l'hàbitat natural dels animals en experimentació no poden utilitzar-se, ja que les dades recopilades són insuficients/inexactes. Amb la finalitat de millorar els experiments de tracking/seguiment RFID Assisted Tracking Tile (RATT) és presentat en aquesta tesi. RATT es un sistema de seguiment basat en tecnologia d'identificació passiva de radiofreqüència (RFID) i esta` compost per rajoles electròniques amb les quals es pot construir una gran superfície, sobre la qual els animals poden moures lliurement. Això permet la identificació més precisa dels animals, així com el seguiment dels seus moviments. Aquest sistema, que també es pot combinar amb un sistema de seguiment amb cambres, aplana el camí per a estudis complets de comportament en entorns enriquits. Donada la capacitat de rastrejar animals i, per tant, realitzar experiments de comportament exhaustius, és possible observar com es comporten els subjectes des d'un punt de vista extern. No obstant això, si volem comprendre el que succeeix en el cervell d'aquests subjectes, és necessari aplicar altres tècniques d'anàlisis, per exemple, l'estudi de senyals dependents del nivell d'oxigen en la sang (BOLD, per les seues sigles en anglès). Els senyals BOLD es basen en les respostes vasculars a l'activació neuronal i s'utilitzen àmpliament en estudis d'investigació clínics i preclínics. En entorns preclínics, els animals solen ser anestesiats. No obstant això, els anestèsics causen canvis en la fisiologia de els animals, per exemple hipotèrmia, i això te el potencial d'alterar els senyals funcionals de MRI (fMRI). Per a evitar la hipotèrmia en rosegadors anestesiats, es presenta TherMouseDuino. Aquest és un sistema de control automàtic de temperatura de codi obert, que redueix les fluctuacions de la temperatura, la qual cosa proporciona condicions solides per a realitzar experiments de ressonància magnètica funcional. En els cursos de biologia i neurociència, l'anatomia del cervell s'ensenya generalment utilitzant imatges de ressonància magnètica (IRM) o seccions histològiques de diferents plans. Aquests mostren les àrees macroscòpiques més importants en el cervell de un animal. No obstant això, aquest mètode no és dinàmic ni intuïtiu. En aquesta tesi es presenta un cervell de rata imprès en 3D amb finalitats educatius. La manipulació manual de l'estructura, facilitada per l'ampliació de les seues dimensions, juntament amb la capacitat de desmuntar el "cervell" en algunes de les seues parts principals, facilita la comprensió de l'organització 3D del sistema nerviós. Aquest és un mètode alternatiu i millorat per a ensenyar a els estudiants en general i als biòlegs, en particular, l'anatomia del cervell de rata., [EN] Neuroscience is a field that covers many specialties. The objective of this thesis is to correct some technological deficiencies that exist in current methods of animal experimentation in neuroscience. In this thesis, six projects are presented, which will aim to improve the "Principle of the three Rs" in animal experimentation enunciated by the English biologists W. M. S. Russell and R. L. Burch. In the present era of impressive progress in neuroscience, it is still not arguable that a complete understanding of the brain cannot be possible without a comparable understanding of animal behavior. In order to study the behavior of laboratory animals, various tools are needed, being a reliable tracking system one of the most important to follow large populations of individual subjects that interact in complex manners. Several visual tracking tools are currently available. However, they all have some drawbacks. For example, in a situation where an animal is inside a cave, or is in close proximity to other animals, tracking cameras cannot always detect the precise location or movement of the animal. For this reason, environments that have been enriched in order to attempt to recreate the natural habitat of the animals under experiment, cannot be used, as the data gathered is insufficient/inaccurate. In order to improve the current tracking systems , the RATT is presented. RATT is a tracking system based on passive RFID technology and it is composed of electronic tiles. Using several tiles, a large surface area, on which the animals can move freely, can be built. This enables the more accurate identification of the animals, as well as the tracking of their movements. This system, which can also be combined with a visual tracking system, paves the way for complete behavioral studies in enriched environments. Given the ability to track animals and thus conduct thorough behavioral experiments, it is possible to observe how the subjects behave from an external viewpoint. However, if we want to understand what is going on in the brains of these subjects, it is necessary to apply other analysis techniques, for example the study of BOLD signals. BOLD signals are based on vascular responses to neuronal activation and are used extensively in clinical and preclinical research studies. In preclinical settings, animals are usually anesthetized. However, anesthetics cause changes in the physiology of the animals, e.g. hypothermia, and this has the potential to disrupt fMRI signals. In order to avoid hypothermia in anesthetized rodents, TherMouseDuino is presented. This is an Open-Source automatic temperature control system, which reduces temperature fluctuations, thus providing robust conditions in which to perform fMRI experiments. In biology and neuroscience courses, brain anatomy is generally taught using MRI or histological sections of different planes. These show the most important macroscopic areas in an animals' brain. However, this method is neither dynamic nor intuitive. An anatomical 3D printed rat brain with educative purposes is presented in this thesis. Hand manipulation of the structure, facilitated by the scaling up of its dimensions, together with the ability to dismantle the "brain" into some of main its constituent parts, facilitates the understanding of the 3D organization of the nervous system. This is an alternative and improved method for teaching students in general and biologists, in particular, the rat brain anatomy., This work was supported in part by the Spanish Ministerio de Economía y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-2-R (D.M.) and BFU2015-64380-C2-1-R, by EU Horizon 2020 Program 668863-SyBil-AA grant (S.C.). S.C. acknowledges financial support from the Spanish State Research Agency, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (ref. SEV-2013-0317) and by a grant “Ayudas para la formación de personal investigador (FPI)” from the Vicerrectorado de Investigación, Innovación y Transferencia of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanocrystalline silicon optomechanical cavities

  • Navarro-Urrios, D.
  • Capuj, N.E.
  • Maire, J.
  • Colombano, M.F.
  • Jaramillo-Fernandez, J.
  • Chavez-Angel, E.
  • Martín-Rodríguez, Leopoldo Luis
  • Sotomayor-Torres, C.M.
  • Ahopelto, J.
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Silicon on insulator photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, there are some constraints such as the high cost of the wafers and limitation to a single physical device level. In the present work we investigate nanocrystalline silicon as an alternative material for optomechanical devices. In particular we demonstrate that optomechanical crystal cavities fabricated of nanocrystalline silicon have optical and mechanical properties enabling non-linear dynamical behaviour and effects such as thermo-optic/free-carrier-dispersion self-pulsing, phonon lasing and chaos, all at low input laser power and with typical frequencies as high as 0.3 GHz. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Commission project PHENOMEN (H2020-EU-713450), MINECO Severo Ochoa Excellence program (SEV-2013-0295), MINECO (FIS2015-70862-P, RYC-2014-15392) and CERCA Programme/Generalitat de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lineability within probability theory settings

  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Fenoy, Mar
  • Murillo Arcila, Marina
  • Seoane Sepúlveda, Juan B.
[EN] The search of lineability consists on finding large vector spaces of mathematical objects with special properties. Such examples have arisen in the last years in a wide range of settings such as in real and complex analysis, sequence spaces, linear dynamics, norm-attaining functionals, zeros of polynomials in Banach spaces, Dirichlet series, and non-convergent Fourier series, among others. In this paper we present the novelty of linking this notion of lineability to the area of Probability Theory by providing positive (and negative) results within the framework of martingales, random variables, and certain stochastic processes., This work was partially supported by Ministerio de Educacion, Cultura y Deporte, projects MTM2013-47093-P and MTM2015-65825-P, by the Basque Government through the BERC 2014-2017 program and by the Spanish Ministerio de Economia y Competitividad: BCAM Severo Ochoa excellence accreditation SEV-2013-0323.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiomicrobiomics: Advancing Along the Gut-brain Axis Through Big Data Analysis

  • De Santis, Silvia
  • Canals, Santiago
  • Moratal, David|||0000-0002-2825-3646
[EN] The gut-brain axis communicates the brain with the gut microbiota, a bidirectional conduit that has received increasing attention in recent years thanks to its emerging role in brain development and function. Alterations in microbiota composition have been associated to neurological and psychiatric disorders, and several studies suggest that the immune system plays a fundamental role in the gut-brain interaction. Recent advances in brain imaging and in microbiome sequencing have generated a large amount of information, yet the data from both these sources need to be combined efficiently to extract biological meaning, and any diagnostic and/or prognostic benefit from these tools. In addition, the causal nature of the gut-brain interaction remains to be fully established, and preclinical findings translated to humans. In this "Perspective" article, we discuss recent efforts to combine data on the gut microbiota with the features that can be obtained from the conversion of brain images into mineable data. The subsequent analysis of these data for diagnostic and prognostic purposes is an approach we call radiomicrobiomics and it holds tremendous potential to enhance our understanding of this fascinating connection., These studies were supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-1-R (S.C.) and BFU2015-64380-C2-2-R (D.M.). This project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 668863. S. C. acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV-2013-0317). D.M. acknowledges financial support from the Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana (grant AEST/2017/013). S.D.S was supported by a NARSAD Young Investigator Grant (Grant #: 25104).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic positioning device for cutting three-dimensional tissue in living or fixed samples. Proof of concept

  • Quiñones, Darío R.
  • Canals-Gamoneda, Santiago
  • Pérez Feito, Ricardo|||0000-0002-8428-9395
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
  • Moratal, David|||0000-0002-2825-3646
[EN] The study and analysis of tissues has always been an important part of the subject in biology. For this reason, obtaining specimens of tissue has been vital to morphological and functionality research. Historically, the main tools used to obtain slices of tissue have been microtomes and vibratomes. However, they are largely unsatisfactory. This is because it is impossible to obtain a full, three-dimensional structure of a tissue sample with these devices. This paper presents an automatic positioning device for a three-dimensional cut in living or fixed tissue samples, which can be applied mainly in histology, anatomy, biochemistry and pharmacology. The system consists of a platform on which the tissue samples can be deposited, plus two containers. An electromechanical system with motors and gears gives the platform the ability to change the orientation of a sample. These orientation changes were tested with movement sensors to ensure that accurate changes were made. This device paves the way for researchers to make cuts in the sample tissue along different planes and in different directions by maximizing the surface of the tract that appears in a slice., Research supported in part by the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under grants BFU2015-64380-C2-2-R and BFU2015-64380-C2-1-R. Santiago Canals acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV- 2013-0317). Dario Quinones is supported by grant Ayudas para la formacion de personal investigador (FPI) from Universitat Politecnica de Valencia. We are grateful to Begoña Fernández (Neuroscience Institute, Consejo Superior de Investigaciones Científicas - CSIC, Alicante, Spain) for her excellent technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Analytical Model Based on Population Processes to Characterize Data Dissemination in 5G Opportunistic Networks

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo Arcila, Marina
[EN] The scarcity of bandwidth due to the explosive growth of mobile devices in 5G makes the offloading messaging workload to Wi-Fi devices that use opportunistic connections, a very promising solution. Communications in mobile opportunistic networks take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we propose an analytical model based on population processes to evaluate data dissemination considering several parameters, such as user density, contact rate, and the number of fixed nodes. From this model, we obtain closed-form expressions for determining the diffusion time, the network coverage, and the waiting time. Newer 5G wireless technologies, such as WiGig, can offer multi-gigabit speeds, low latency, and security-protected connectivity between nearby devices. We therefore focus our work on the impact of high-speed and short-range wireless communications technologies for data dissemination in mobile opportunistic networks. Moreover, we test whether the coexistence with a fixed infrastructure can improve content dissemination, and thus justify its additional cost. Our results show that, when user density is high, the diffusion is mainly performed through the opportunistic contacts between mobile nodes, and that the diffusion coverage is close to 100%. Moreover, the diffusion is fast enough to dynamically update the information among all the participating members, so users do not need to get closer to fixed spots for receiving updated information., This work was supported in part by the Ministerio de Economa y Competitividad, Spain, under Grant TEC2014-52690-R, Grant MTM 2016-75963-P, and Grant SEV-2013-0323, in part by Generalitat Valenciana, Spain, under Grant AICO/2015/108 and Grant ACOMP/2015/005.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Brain functional connectivity alterations in a rat model of excessive alcohol drinking: A resting-state network analysis

  • Pérez-Ramírez, María Úrsula
  • Díaz-Parra, Antonio
  • Ciccocioppo, R.
  • Canals, S.
  • Moratal, David|||0000-0002-2825-3646
[EN] Alcohol use disorders (AUD) are a major public health concern. Understanding the brain network alterations is of the utmost importance to diagnose and develop treatment strategies. Employing resting-state functional magnetic resonance imaging, we have performed a longitudinal study in a rat model of chronic excessive alcohol consumption, to identify functional alterations in brain networks triggered by alcohol drinking. Two time points were considered: 1) before alcohol consumption (control condition) and 2) after 30 days of alcohol drinking (alcohol condition). We first identified nine resting-state networks with group independent component analysis. Afterwards, dual regression was applied to obtain subject-specific time courses and spatial maps. L2-regularized partial correlation analysis between pairs of networks showed that functional connectivity (FC) between the retrosplenial-visual and striatal networks decreases due to alcohol consumption, whereas FC between the prefrontal-cingulate and striatal networks increases. Analysis of subject-specific spatial maps revealed FC decreases within networks after alcohol drinking, including the striatal, motor-parietal, prefrontal-cingulate, retrosplenial-visual and left motor-parietal networks. Overall, our results unveil a generalized decrease in brain FC induced by alcohol drinking in genetically predisposed animals, even after a relatively short period of exposure (1 month). The only exception to this hypo-connectivity state is the functional association between the striatal and prefrontal-cingulate networks, which increases after drinking, supporting evidence in human alcoholics., Research supported by the Spanish Ministerio de Economia y Competitividad (MINECO) under grants BFU2015-64380-C2-1-R and BFU2015-64380-C2-2R, and EU Horizon 2020 Program 668863-SyBil-AA grant. S. Canals acknowledges financial support from the Spanish State Research Agency, through the "Severo Ochoa" Programme for Centres of Excellence in R&D (ref. SEV-2013-0317). U. Perez-Ramirez and A. Diaz-Parra are funded by the Spanish Ministerio de Educacion, Cultura y Deporte (MECD) under grant FPU13/03537 and FPU13/01475 respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical evaluation of the performance of contact-based messaging applications

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo Arcila, Marina
Communications in mobile opportunistic networks, instead of using the Internet infrastructure, take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we analytically model the performance of mobile opportunistic networks for contact-based messaging applications in city squares or gathering points, a key challenging topic that is required for the effective design of novel services. We take into account several social aspects such as: the density of people, the dynamic of people arriving and leaving a place, the size of the messages and the duration of the contacts. We base our models on Population Processes, an approach commonly used to represent the dynamics of biological populations. We study their stable equilibrium points and obtain analytical expressions for their resolution. The evaluations performed show that these models can reproduce the dynamics of message diffusion applications. We demonstrate that when the density of people increases, the effectiveness of the diffusion is improved. Regarding the arrival and departure of people, their impact is more relevant when the density of people is low. Finally, we prove that for large message sizes the effectiveness of the epidemic diffusion is reduced, and novel diffusion protocols should be considered. © 2016 Elsevier B.V. All rights reserved., This work was partially supported by Ministerio de Economia y Competitividad, Spain (Grants TEC2014-52690-R & MTM2013-47093-P & SEV-2013-0323), Generalitat Valenciana, Spain (Grants AICO/2015/108 & ACOMP/2015/005) and by the Basque Government through the BERC 2014-2017 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
Our aim was to compare the different methods of modeling the effect of circulating blood flow on the thermal lesion dimensions created by radio frequency (RF) cardiac ablation and on the maximum blood temperature. Computational models were built to study the temperature distributions and lesion dimensions created by a nonirrigated electrode by two RF energy delivery protocols (constant voltage and constant temperature) under high and low blood flow conditions. Four methods of modeling the effect of circulating blood flow on lesion dimensions and temperature distribution were compared. Three of them considered convective coeffi- cients at the electrode–blood and tissue–blood interfaces to model blood flow: 1) without including blood as a part of the domain; 2) constant electrical conductivity of blood; and 3) temperaturedependent electrical conductivity of blood (+2%/°C). Method 4) included blood motion and was considered to be a reference method for comparison purposes. Only Method 4 provided a realistic blood temperature distribution. The other three methods predicted lesion depth values similar to those of the reference method (differences smaller than 1 mm), regardless of ablation mode and blood flow conditions. Considering the aspects of lesion size and maximum temperature reached in blood and tissue, Method 2 seems to be the most suitable alternative to Method 4 in order to reduce the computational complexity. Our findings could have an important implication in future studies of RF cardiac ablation, in particular, in choosing the most suitable method to model the thermal effect of circulating blood., This work was supported in part by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3 (TEC2014-52383-C3-1-R) and also by the Basque Government through the BERC 2014-2017 program and by Spanish Ministry of Economy and Competitiveness MINECO: BCAM Severo Ochoa excellence accreditation SEV-2013-0323. Asterisk indicates corresponding author.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Shoaling of nonlinear steady waves: maximum height and angle of breaking

  • Romero, S.
  • Farina, L.
A Fourier approximation method is used for modeling and simu- lation of fully nonlinear steady waves. The set of resulting nonlinear equations are solved by Newton’s method. The shoaling of waves is simulated based on comparisons with experimental data. The wave heights and the angles of breaking are analysed until the limit of inadequacy of the numerical method. The results appear quite close to those criteria predicted by the theory of com- pletely nonlinear surface waves and contribute to provide information on the study of the relationship between computational modeling and the theory of steady waves.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Complex angular momentum theory of state-to-state integral cross sections: Resonance effects in the

F + HD \to HF(v' = 3) + D
  • Sokolovski, D.
  • Akhmatskaya, E.
  • Echeverria-Arrondo, C.
  • de Fazio, D.
State-to-state reactive integral cross sections (ICSs) are often affected by quantum mechanical resonances, especially near a reactive threshold. An ICS is usually obtained by summing partial waves at a given value of energy. For this reason, the knowledge of pole positions and residues in the complex energy plane is not sufficient for a quantitative description of the patterns produced by resonance. Such description is available in terms of the poles of an S-matrix element in the complex plane of the total angular momentum. The approach was recently implemented in a computer code, available in the public domain [Comput. Phys. Commun., 2014, 185, 2127]. In this paper, we employ the package to analyse in detail, for the first time, the resonance patterns predicted for integral cross sections (ICSs) of the benchmark F + HD → HF(v′ = 3) + D reaction. The v = 0, j = 0, Ω = 0 → v′ = 3, j′ = 0, 1, 2, and Ω′ = 0, 1, 2 transitions are studied for collision energies from 58.54 to 197.54 meV. For these energies, we find several resonances, whose contributions to the ICS vary from symmetric and asymmetric Fano shapes to smooth sinusoidal Regge oscillations. Complex energies of metastable states and Regge pole positions and residues are found by Padé reconstruction of the scattering matrix elements. The accuracy of the code, relation between complex energies and Regge poles, various types of Regge trajectories, and the origin of the J-shifting approximation are also discussed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The airfoil equation on near disjoint intervals: Approximate models and polynomial solutions

  • Farina, L.
  • Ferreira, M.R.S.
  • Peron, V.
The airfoil equation is considered over two disjoint intervals. Assuming the distance between the intervals is small an approximate solution is found and relationships between this approximation and the solution of the classical airfoil equation are obtained. Numerical results show the convergence of the solution of the original problem to the approximation. Polynomial solutions for an approximate model are obtained and a spectral method for the generalized airfoil equation on near disjoint intervals is proposed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An Isoperimetric-Type Inequality for Electrostatic Shell Interactions for Dirac Operators

  • Arrizabalaga, N.
  • Mas, A.
  • Vega, L.
In this article we investigate spectral properties of the coupling $H + V_{\lambda}$, where $H =-i\alpha \cdot \nabla + m\beta$ is the free Dirac operator in $\mathbb{R}^3$, $m>0$ and $V_{\lambda}$ is an electrostatic shell potential (which depends on a parameter $\lambda \in \mathbb{R}$) located on the boundary of a smooth domain in $\mathbb{R}^3$. Our main result is an isoperimetric-type inequality for the admissible range of $\lambda$'s for which the coupling $H + V_{\lambda}$ generates pure point spectrum in $(-m,m)$. That the ball is the unique optimizer of this inequality is also shown. Regarding some ingredients of the proof, we make use of the Birman-Schwinger principle adapted to our setting in order to prove some monotonicity property of the admissible $\lambda$'s, and we use this to relate the endpoints of the admissible range of $\lambda$'s to the sharp constant of a quadratic form inequality, from which the isoperimetric-type inequality is derived.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Spectral asymptotics of the Dirichlet Laplacian in a conical layer

  • Dauge, M.
  • Ourmières-Bonafos, T.
  • Raymond, N.
The spectrum of the Dirichlet Laplacian on conical layers is analysed through two aspects: the infiniteness of the discrete eigenvalues and their expansions in the small aperture limit. On the one hand, we prove that, for any aperture, the eigenvalues accumulate below the threshold of the essential spectrum: For a small distance from the essential spectrum, the number of eigenvalues farther from the threshold than this distance behaves like the logarithm of the distance. On the other hand, in the small aperture regime, we provide a two-term asymptotics of the first eigenvalues thanks to a priori localization estimates for the associated eigenfunctions. We prove that these eigenfunctions are localized in the conical cap at a scale of order the cubic root of the aperture angle and that they get into the other part of the layer at a scale involving the logarithm of the aperture angle.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Time-resolved adaptive FEM simulation of the DLR-F11 aircraft model at high Reynolds number

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
  • de Abreu, R.V.
We present a time-resolved, adaptive finite element method for aerodynamics, together with the results from the HiLiftPW-2 workshop, where this method is used to compute the ow past a DLR-F11 aircraft model at realistic Reynolds number. The mesh is automatically constructed by the method as part of the computation, and no explicit turbulence model is used. The effect of unresolved turbulent boundary layers is modeled by a simple parametrization of the wall shear stress in terms of the skin friction. In the extreme case of very high Reynolds numbers we approximate the small skin friction by zero skin friction, corresponding to a free slip boundary condition, which results in a computational model without any model parameter that needs tuning. Thus, the simulation methodology bypasses the main challenges posed by high Reynolds number CFD: the design of an optimal computational mesh, turbulence (or subgrid) modeling, and the cost of boundary layer res- olution. The results from HiLiftPW-2 presented in this report show good agreement with experimental data for a range of different angles of attack, while using orders of magnitude fewer degrees of freedom than what is needed in state of the art methods such as RANS.
BIRD. BCAM's Institutional Repository Data
Publicación Otros (Other)

Introduction to the special issue on high performance computing solutions for complex problems

BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

LBM-HPC - An open-source tool for fluid simulations. Case study: Unified parallel C (UPC-PGAS)

  • Valero-Lara, P.
  • Jansson, J.
The main motivation of this work is the evaluation of the Unified Parallel C (UPC) model, for Boltzmann-fluid simulations. UPC is one of the current models in the so-called Partitioned Global Address Space paradigm. This paradigm attempts to increase the simplicity of codes and achieve a better efficiency and scalability. Two different UPC-based implementations, explicit and implicit, are presented and evaluated. We compare the fundamental features of our UPC implementations with other parallel programming model, MPI-OpenMP. In particular each of the major steps of any LBM code, i.e., Boundary Conditions, Communication, and LBM solver, are analyzed.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

A Non-uniform Staggered Cartesian Grid approach for Lattice-Boltzmann method

  • Valero-Lara, P.
  • Jansson, J.
We propose a numerical approach based on the Lattice-Boltzmann method (LBM) for dealing with mesh refinement of Non-uniform Staggered Cartesian Grid. We explain, in detail, the strategy for mapping LBM over such geometries. The main benefit of this approach, compared to others, consists of solving all fluid units only once per time-step, and also reducing considerably the complexity of the communication and memory management between different refined levels. Also, it exhibits a better matching for parallel processors. To validate our method, we analyze several standard test scenarios, reaching satisfactory results with respect to other stateof-the-art methods. The performance evaluation proves that our approach not only exhibits a simpler and efficient scheme for dealing with mesh refinement, but also fast resolution, even in those scenarios where our approach needs to use a higher number of fluid units.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards a parameter-free method for high Reynolds number turbulent flow simulation based on adaptive finite element approximation

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
  • de Abreu, R.V.
This article is a review of our work towards a parameter-free method for simulation of turbulent flow at high Reynolds numbers. In a series of papers we have developed a model for turbulent flow in the form of weak solutions of the Navier-Stokes equations, approximated by an adaptive finite element method, where: (i) viscous dissipation is assumed to be dominated by turbulent dissipation proportional to the residual of the equations, and (ii) skin friction at solid walls is assumed to be negligible compared to inertial effects. The result is a computational model without empirical data, where the only model parameter is the local size of the finite element mesh. Under adaptive refinement of the mesh based on a posteriori error estimation, output quantities of interest in the form of functionals of the finite element solution converge to become independent of the mesh resolution, and thus the resulting method has no adjustable parameters. No ad hoc design of the mesh is needed, instead the mesh is optimized based on solution features, in particular no boundary layer mesh is needed. We connect the computational method to the mathematical concept of a dissipative weak solution of the Euler equations, as a model of high Reynolds number turbulent flow, and we highlight a number of benchmark problems for which the method is validated. The purpose of the article is to present the computational framework in a concise form, to report on recent progress, and to discuss open problems that are subject to ongoing research.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Accelerating fluid-solid simulations (Lattice-Boltzmann & Immersed-Boundary) on heterogeneous architectures

  • Valero-Lara, P.
  • Igual, F.D.
  • Prieto-Matias, M.
  • Pinelli, A.
  • Favier, J.
We propose a numerical approach based on the Lattice-Boltzmann (LBM) and Immersed Boundary (IB) methods to tackle the problem of the interaction of solids with an incompressible fluid flow, and its implementation on heterogeneous platforms based on data-parallel accelerators such as NVIDIA GPUs and the Intel Xeon Phi. We explain in detail the parallelization of these methods and describe a number of optimizations, mainly focusing on improving memory management and reducing the cost of host-accelerator communication. As previous research has consistently shown, pure LBM simulations are able to achieve good performance results on heterogeneous systems thanks to the high parallel efficiency of this method. Unfortunately, when coupling LBM and IB methods, the overheads of IB degrade the overall performance. As an alternative, we have explored different hybrid implementations that effectively hide such overheads and allow us to exploit both the multi-core and the hardware accelerator in a cooperative way, with excellent performance results.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Adaptive simulation of unsteady flow past the submerged part of a floating wind turbine platform

  • Jansson, J.
  • Nava, V.
  • Sanchez, M.
  • Aguirre, G.
  • de Abreu, R.V.
  • Hoffman, J.
  • Villate, J.L.
Offshore floating platforms for wind turbines represent challenging concepts for designers trying to combine an optimal compromise between cost effectiveness and performance. Modelling of the hydrodynamic behaviour of the structure is still the subject of wide debate in the technical communities. The assessment of the hydrodynamics of the support structure is not an easy task as the floaters consist of an assembly of columns, braces and pontoons, commonly also with heave plates: Each of these components corresponds to a different hydrodynamic model and it further interacts with the other elements. This results in very complex non-linear modeling, which makes it necessary to resort to computational fluid dynamics (CFD) methods for the evaluation of the combined hydrodynamics. In the framework of the collaboration between the Basque Centre for Applied Mathematics (BCAM) and Tecnalia R&I, the interaction of the sea flow with a semisubmersible floating offshore wind platform have been calculated by using the open source solver Unicorn in the FEniCS-HPC framework when subject to a steady inflow. The prototype of the platform consists in a semi-submersible 4-columns column stabilized platform - NAUTILUS Floating Solutions concept-; columns are connected by a rigid ring pontoon provided with heave damping plates at the bottom. The novelty of the approach in FEniCS-HPC hinges upon an implicit formulation for the turbulence, a cheap free slip model of the boundary layer and goal-oriented mesh adaptivity [8, 6, 9, 20, 1]. We find that the results are consistent with experimental results for cylinders at high Reynolds number.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Multi-domain grid refinement for lattice-Boltzmann simulations on heterogeneous platforms

  • Valero-Lara, P.
  • Jansson, J.
The main contribution of the present work consists of several parallel approaches for grid refinement based on a multi-domain decomposition for lattice-Boltzmann simulations. The proposed method for discretizing the fluid incorporates different regular Cartesian grids with no homogeneous spatial domains, which are in need to be communicated each other. Three different parallel approaches are proposed, homogeneous Multicore, homogeneous GPU, and heterogeneous Multicore-GPU. Although, the homogeneous implementations exhibit satisfactory results, the heterogeneous approach achieves up to 30% extra efficiency, in terms of Millions of Fluid Lattice Updates per Second (MFLUPS), by overlapping some of the steps on both architectures, Multicore and GPU.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

FEniCS-HPC: Automated predictive high-performance finite element computing with applications in aerodynamics

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
Developing multiphysics finite element methods (FEM) and scalable HPC implementations can be very challenging in terms of software complexity and performance, even more so with the addition of goal-oriented adaptive mesh refinement. To manage the complexity we in this work present general adaptive stabilized methods with automated implementation in the FEniCS-HPC automated open source software framework. This allows taking the weak form of a partial differential equation (PDE) as input in near-mathematical notation and automatically generating the low-level implementation source code and auxiliary equations and quantities necessary for the adaptivity. We demonstrate new optimal strong scaling results for the whole adaptive framework applied to turbulent flow on massively parallel architectures down to 25000 vertices per core with ca. 5000 cores with the MPI-based PETSc backend and for assembly down to 500 vertices per core with ca. 20000 cores with the PGAS-based JANPACK backend. As a demonstration of the power of the combination of the scalability together with the adaptive methodology allowing prediction of gross quantities in turbulent flow we present an application in aerodynamics of a full DLR-F11 aircraft in connection with the HiLift-PW2 benchmarking workshop with good match to experiments.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Many-task computing on many-core architectures

  • Valero-Lara, P.
  • Nookala, P.
  • Pelayo, F.L.
  • Jansson, J.
  • Dimitropoulos, S.
  • Raicu, I.
Many-Task Computing (MTC) is a common scenario for multiple parallel systems, such as cluster, grids, cloud and supercomputers, but it is not so popular in shared memory parallel processors. In this sense and given the spectacular growth in performance and in number of cores integrated in many-core architectures, the study of MTC on such architectures is becoming more and more relevant. In this paper, authors present what are those programming mechanisms to take advantages of such massively parallel features for the particular target of MTC. Also, the hardware features of the two dominant many-core platforms (NVIDIA's GPUs and Intel Xeon Phi) are also analyzed for our specific framework. Given the important differences in terms of hardware and software in our two many-core platforms, we have considered different strategies based on CUDA (for GPUs) and OpenMP (for Intel Xeon Phi). We carried out several test cases based on an appropriate and widely studied problem for benchmarking as matrix multiplication. Essentially, this study consisted of comparing the time consumed for computing in parallel several tasks one by one (the whole computational resources are used just to compute one task at a time) with the time consumed for computing in parallel the same set of tasks simultaneously (the whole computational resources are used for computing the set of tasks at very same time). Finally, we compared both software-hardware scenarios to identify the most relevant computer features in each of our many-core architectures.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

BBIPED: BCAM-Baltogar Industrial Platform for Engineering Design

  • Alonso-Montes, C.
  • Garcia, I.
  • Ramezani, A.
  • Remaki, L.
Currently, commercial software for computational fluid dynamics offers a good set of features to deal with traditional designs. Within a competitive market industrial innovation is a key factor that must be faced by companies. However, the design of solutions to deal with industrial challenges cannot be done within commercial software due to the lack of flexibility. Open source initiatives are a good option but the learning curve is high, specially for industrial engineers profiles. In this paper, we present the BBIPED platform which has been designed to deal with turbomachinery applications in a simple and friendly way. The main goal is to keep the platform as simpler as possible providing the enough flexibility to include out-of-the-box solutions to cope with industrial challenges. BBIPED platform provides links with currently existing remarkable open source initiatives altogether with our own developments. Particularly, it is remarkable a first approach for automatic mesh generation based on geometry parametrization solution, and the provision of novel techniques to deal with multiple rotating frame (MRF): Multizone MRF an Virtual MRF. Case tests were designed to test the solutions and to assess and validate the results against commercial suites with promising results.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Identification of defects originated during the filling of cast pieces through particles modelling

  • Blanco, J.M.
  • Carranza, P.
  • Pintos, R.
  • Arriaga, P.
  • Remaki, L.
In casting processes, strong recirculation zones may trap air, gases and strip particles of sand off the mold affecting seriously the quality of the cast pieces. Especially during the filling of molten pieces with large surfaces, several faults were detected which are responsible of considerable economic losses in such casting processes. The aim of this work is focused on the correct identification of these physical phenomena, through Computational Fluid Dynamics (CFD). A fully experimental work correlating a saline solution with similar properties than the liquid alloy was carried out in order to guess the flow behavior inside the mold. Different parameters such as filling time, temperature and velocity of the liquid alloy together with the geometrical design of the mold were taken into account. The simulated evolution profiles and propagation speeds were compared with the laboratory experiments showing good agreement, validating thus the numerical model. Through an advanced particles modeling feature from a commercial package, the potential to predict and later correct some casting defects was demonstrated. As a conclusion, the mold together with supply channels need to be carefully optimized in order to control the correct direction of solidification avoiding the appearance of oxides but also to prevent stripping the sand off the walls.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Lagged and instantaneous dynamical influences related to brain structural connectivity

  • Alonso, C.
  • Diez, I.
  • Remaki, L.
  • Escudero, I.
  • Mateos, B.
  • Rosseel, Y.
  • Marinazzo, D.
  • Stramaglia, S.
  • Cortes, J.M.
Contemporary neuroimaging methods can shed light on the basis of human neural and cognitive specializations, with important implications for neuroscience and medicine. Indeed, different MRI acquisitions provide different brain networks at the macroscale; whilst diffusion-weighted MRI (dMRI) provides a structural connectivity (SC) coincident with the bundles of parallel fibers between brain areas, functional MRI (fMRI) accounts for the variations in the blood-oxygenation-level-dependent T2* signal, providing functional connectivity (FC). Understanding the precise relation between FC and SC, that is, between brain dynamics and structure, is still a challenge for neuroscience. To investigate this problem, we acquired data at rest and built the corresponding SC (with matrix elements corresponding to the fiber number between brain areas) to be compared with FC connectivity matrices obtained by three different methods: directed dependencies by an exploratory version of structural equation modeling (eSEM), linear correlations (C) and partial correlations (PC). We also considered the possibility of using lagged correlations in time series; in particular, we compared a lagged version of eSEM and Granger causality (GC). Our results were two-fold: firstly, eSEM performance in correlating with SC was comparable to those obtained from C and PC, but eSEM (not C, nor PC) provides information about directionality of the functional interactions. Second, interactions on a time scale much smaller than the sampling time, captured by instantaneous connectivity methods, are much more related to SC than slow directed influences captured by the lagged analysis. Indeed the performance in correlating with SC was much worse for GC and for the lagged version of eSEM. We expect these results to supply further insights to the interplay between SC and functional patterns, an important issue in the study of brain physiology and function.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Numerical investigation of the aerodynamic performance for a wells-type turbine in a wave energy converter

  • Stipcich, G.
  • Ramezani, A.
  • Nava, V.
  • Touzon, I.
  • Sanchez-Lara, M.
  • Remaki, L.
Ocean waves constitute an extensive energy resource, whose extraction has been the subject of intense research activity in the last three decades. Among the different variants of Wave Energy Converters, the principle of the Oscillating Water Column (OWC) is one of the most promising ones. An OWC comprises two key elements: A collector chamber, which transfers the wave oscillations' energy to the air within the chamber by back and forth displacement, and a power take off system, which converts the pneumatic power into electricity or some other usable form. The Wells turbine is a self-rectifying air turbine, a suitable solution for energy extraction from reciprocating air flow in an OWC. In the present work, the steady state, inviscid flow in the Wells turbine is investigated by numerical simulations. The relatively novel Virtual Multiple Reference Frame (VMRF) technique is used to account for the rotary motion of the turbine, and the overall performance is compared with results in the literature.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Pseudospin lifetime in relaxed-shape armchair graphene nanoribbons due to in-plane phonon modes

  • Prabhakar, S.
  • Melnik, R.
  • Bonilla, L.
We study the influence of ripple waves on the band structures of strained armchair graphene nanoribbons. We argue that the Zeeman pseudospin (p-spin) splitting energy induced by ripple waves might not be neglected for smaller widths of armchair graphene nanoribbons (GNRs). We show that the p-spin splitting energy breaks the symmetry of degeneracy due to the ripple-induced Zeeman effect in GNRs, originating from electromechanical coupling. We estimate the p-spin lifetime in strained armchair GNRs caused by in-plane phonon modes for possible applications in straintronics and quantum information processing. By considering higher order terms in the strain tensor expansion, we also demonstrate that highly asymmetric band structures of GNRs induce asymmetric phonon-mediated p-spin relaxation. Such asymmetric p-spin relaxation is not possible for unstrained armchair and zigzag GNRs. In particular, we report that the p-spin transition rate decreases like B05 (as a function of p-magnetic fields), L-9 (as a function of GNR width) and τe-1, where τe is the externally applied tensile edge stress.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Multiple-time-stepping generalized hybrid Monte Carlo methods

  • Escribano, B.
  • Akhmatskaya, E.
  • Reich, S.
  • Azpiroz, J.M.
Performance of the generalized shadow hybrid Monte Carlo (GSHMC) method [1], which proved to be superior in sampling efficiency over its predecessors [2-4], molecular dynamics and hybrid Monte Carlo, can be further improved by combining it with multi-time-stepping (MTS) and mollification of slow forces. We demonstrate that the comparatively simple modifications of the method not only lead to better performance of GSHMC itself but also allow for beating the best performed methods, which use the similar force splitting schemes. In addition we show that the same ideas can be successfully applied to the conventional generalized hybrid Monte Carlo method (GHMC). The resulting methods, MTS-GHMC and MTS-GSHMC, provide accurate reproduction of thermodynamic and dynamical properties, exact temperature control during simulation and computational robustness and efficiency. MTS-GHMC uses a generalized momentum update to achieve weak stochastic stabilization to the molecular dynamics (MD) integrator. MTS-GSHMC adds the use of a shadow (modified) Hamiltonian to filter the MD trajectories in the HMC scheme. We introduce a new shadow Hamiltonian formulation adapted to force-splitting methods. The use of such Hamiltonians improves the acceptance rate of trajectories and has a strong impact on the sampling efficiency of the method. Both methods were implemented in the open-source MD package ProtoMol and were tested on a water and a protein systems. Results were compared to those obtained using a Langevin Molly (LM) method [5] on the same systems. The test results demonstrate the superiority of the new methods over LM in terms of stability, accuracy and sampling efficiency. This suggests that putting the MTS approach in the framework of hybrid Monte Carlo and using the natural stochasticity offered by the generalized hybrid Monte Carlo lead to improving stability of MTS and allow for achieving larger step sizes in the simulation of complex systems.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Constant pressure hybrid Monte Carlo simulations in GROMACS

  • Fernández-Pendás, M.
  • Escribano, B.
  • Radivojevic, T.
  • Akhmatskaya, E.
Adaptation and implementation of the Generalized Shadow Hybrid Monte Carlo (GSHMC) method for molecular simulation at constant pressure in the NPT ensemble are discussed. The resulting method, termed NPT-GSHMC, combines Andersen barostat with GSHMC to enable molecular simulations in the environment natural for biological applications, namely, at constant pressure and constant temperature. Generalized Hybrid Monte Carlo methods are designed to maintain constant temperature and volume and extending their functionality to preserving pressure is not trivial. The theoretical formulation of NPT-GSHMC was previously introduced. Our main contribution is the implementation of this methodology in the GROMACS molecular simulation package and the evaluation of properties of NPT-GSHMC, such as accuracy, performance, effectiveness for real physical systems in comparison with well-established molecular simulation techniques. Benchmarking tests are presented and the obtained preliminary results are promising. For the first time, the generalized hybrid Monte Carlo simulations at constant pressure are available within the popular open source molecular dynamics software package.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Computing the eigenvalues of realistic Daphnia models by pseudospectral methods

  • Breda, D.
  • Getto, P.
  • Sanchez Sanz, J.
  • Vermiglio, R.
This work deals with physiologically structured populations of the Daphnia type. Their biological modeling poses several computational challenges. In such models, indeed, the evolution of a size structured consumer described by a Volterra functional equation (VFE) is coupled to the evolution of an unstructured resource described by a delay differential equation (DDE), resulting in dynamics over an infinite dimensional state space. As additional complexities, the right-hand sides are both of integral type (continuous age distribution) and given implicitly through external ordinary differential equations (ODEs). Moreover, discontinuities in the vital rates occur at a maturation age, also given implicitly through one of the above ODEs. With the aim at studying the local asymptotic stability of equilibria and relevant bifurcations, we revisit a pseudospectral approach recently proposed to compute the eigenvalues of the infinitesimal generator of linearized systems of coupled VFEs/DDEs. First, we modify it in view of extension to nonlinear problems for future developments. Then, we consider a suitable implementation to tackle all the computational difficulties mentioned above: a piecewise approach to handle discontinuities, numerical quadrature of integrals, and numerical solution of ODEs. Moreover, we rigorously prove the spectral accuracy of the method in approximating the eigenvalues and how this outstanding feature is influenced by the other unavoidable error sources. Implementation details and experimental computations on existing available data conclude the work.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Microscopic Conductivity of Lattice Fermions at Equilibrium. Part II: Interacting Particles

  • Bru, J.-B.
  • de Siqueira Pedra, W.
We apply Lieb–Robinson bounds for multi-commutators we recently derived (Bru and de Siqueira Pedra, Lieb–Robinson bounds for multi-commutators and applications to response theory, 2015) to study the (possibly non-linear) response of interacting fermions at thermal equilibrium to perturbations of the external electromagnetic field. This analysis leads to an extension of the results for quasi-free fermions of (Bru et al. Commun Pure Appl Math 68(6):964–1013, 2015; Bru et al. J Math Phys 56:051901-1–051901-51, 2015) to fermion systems on the lattice with short-range interactions. More precisely, we investigate entropy production and charge transport properties of non-autonomous C*-dynamical systems associated with interacting lattice fermions within bounded static potentials and in presence of an electric field that is time and space dependent. We verify the 1st law of thermodynamics for the heat production of the system under consideration. In linear response theory, the latter is related with Ohm and Joule’s laws. These laws are proven here to hold at the microscopic scale, uniformly with respect to the size of the (microscopic) region where the electric field is applied. An important outcome is the extension of the notion of conductivity measures to interacting fermions.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Kinetic energy estimates for the accuracy of the time-dependent Hartree-Fock approximation with Coulomb interaction

  • Bach, V.
  • Breteaux, S.
  • Petrat, S.
  • Pickl, P.
  • Tzaneteas, T.
We study the time evolution of a system of $N$ spinless fermions in $\mathbb{R}^3$ which interact through a pair potential, e.g., the Coulomb potential. We compare the dynamics given by the solution to Schrödinger's equation with the time-dependent Hartree-Fock approximation, and we give an estimate for the accuracy of this approximation in terms of the kinetic energy of the system. This leads, in turn, to bounds in terms of the initial total energy of the system.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Lieb–Robinson Bounds for Multi–Commutators and Applications to Response Theory

  • Bru, J.-B.
  • de Siqueira Pedra, W.
We generalize to multi–commutators the usual Lieb–Robinson bounds for commutators. In the spirit of constructive QFT, this is done so as to allow the use of combinatorics of minimally connected graphs (tree expan- sions) in order to estimate time–dependent multi–commutators for interact- ing fermions. Lieb–Robinson bounds for multi–commutators are effective mathematical tools to handle analytic aspects of the dynamics of quantum particles with interactions which are non–vanishing in the whole space and possibly time–dependent. To illustrate this, we prove that the bounds for multi–commutators of order three yield existence of fundamental solutions for the corresponding non–autonomous initial value problems for observ- ables of interacting fermions on lattices. We further show how bounds for multi–commutators of order higher than two can be used to study linear and non–linear responses of interacting fermions to external perturbations. The results discussed here are also valid for quantum spins on lattices, with obvi- ous modifications. However, we only discuss the fermionic case in detail, in view of applications to microscopic quantum theory of electrical conduction discussed here and because this case is technically more involved.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Universal Bounds for Large Determinants from Non–Commutative Ho ̈lder Inequalities in Fermionic Constructive Quantum Field Theory

  • Bru, J.-B.
  • de Siqueira Pedra, W.
Efficiently bounding large determinants is an essential step in non–relati- vistic fermionic constructive quantum field theory, because, together with the summability of the interaction and the covariance, it implies the abso- lute convergence of the perturbation expansion of all correlation functions in terms of powers of the strength u ∈ R of the interparticle interaction. We provide, for large determinants of fermionic convariances, sharp bounds which hold for all (bounded and unbounded, the latter not being limited to semibounded) one–particle Hamiltonians. We find the smallest universal determinant bound to be exactly 1. In particular, the convergence of pertur- bation series at u = 0 of any fermionic quantum field theory is ensured by the decay properties of the covariance and the interparticle interaction alone. Our proofs use Ho ̈lder inequalities for general non–commutative Lp–spaces derived by Araki and Masuda [AM].
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Equisingularity in One-Parameter Families of Generically Reduced Curves

  • Fernández de Bobadilla, J.
  • Snoussi, J.
  • Spivakovsky, M.
We explore some equisingularity criteria in one-parameter families of generically reduced curves. We prove the equivalence between Whitney regularity and Zariski’s discriminant criterion. We prove that topological triviality implies smoothness of the normalized surface. Examples are given to show that Witney regularity and equisaturation are not stable under the blow-up of the singular locus nor under the Nash modification.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Modelling wildland fire propagation by tracking random fronts

  • Pagnini, G.
  • Mentrelli, A.
Abstract. Wildland fire propagation is studied in the liter- ature by two alternative approaches, namely the reaction– diffusion equation and the level-set method. These two ap- proaches are considered alternatives to each other because the solution of the reaction–diffusion equation is generally a continuous smooth function that has an exponential de- cay, and it is not zero in an infinite domain, while the level- set method, which is a front tracking technique, generates a sharp function that is not zero inside a compact domain. However, these two approaches can indeed be considered complementary and reconciled. Turbulent hot-air transport and fire spotting are phenomena with a random nature and they are extremely important in wildland fire propagation. Consequently, the fire front gets a random character, too; hence, a tracking method for random fronts is needed. In par- ticular, the level-set contour is randomised here according to the probability density function of the interface particle dis- placement. Actually, when the level-set method is developed for tracking a front interface with a random motion, the re- sulting averaged process emerges to be governed by an evo- lution equation of the reaction–diffusion type. In this recon- ciled approach, the rate of spread of the fire keeps the same key and characterising role that is typical of the level-set ap- proach. The resulting model emerges to be suitable for sim- ulating effects due to turbulent convection, such as fire flank and backing fire, the faster fire spread being because of the actions by hot-air pre-heating and by ember landing, and also due to the fire overcoming a fire-break zone, which is a case not resolved by models based on the level-set method. More- over, from the proposed formulation, a correction follows for the formula of the rate of spread which is due to the mean jump length of firebrands in the downwind direction for the leeward sector of the fireline contour. The presented study constitutes a proof of concept, and it needs to be subjected to a future validation.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Front propagation in anomalous diffusive media governed by time-fractional diffusion

  • Mentrelli, A.
  • Pagnini, G.
In this paper, a multi-dimensional model is proposed to study the propagation of random fronts in media in which anomalous diffusion takes place. The front position is obtained as the weighted mean of fronts calculated by means of the level set method, using as weight-function the probability density function which characterizes the anomalous diffusion process. Since anomalous diffusion is assumed to be governed by a time-fractional diffusion equation, its fundamental solution is the required probability density function. It is shown that this fundamental solution can be expressed in the multi-dimensional case in terms of the well-known M-Wright/Mainardi function, as in the one-dimensional case. Making use of this representation for the practical purpose of numerical evaluation, the propagation of random fronts in two-dimensional subdiffusive media is discussed and investigated.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Self-similar stochastic models with stationary increments for symmetric space-time fractional diffusion

  • Pagnini, G.
An approach to develop stochastic models for studying anomalous diffusion is proposed. In particular, in this approach the stochastic particle trajectory is based on the fractional Brownian motion but, for any realization, it is multiplied by an independent random variable properly distributed. The resulting probability density function for particle displacement can be represented by an integral formula of subordination type and, in the single-point case, it emerges to be equal to the solution of the spatially symmetric space-time fractional diffusion equation. Due to the fractional Brownian motion, this class of stochastic processes is self-similar with stationary increments in nature and uniquely defined by the mean and the auto-covariance structure analogously to the Gaussian processes. Special cases are the time-fractional diffusion, the space-fractional diffusion and the classical Gaussian diffusion.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Averaged control

  • Zuazua, E.
We analyze the problem of controlling parameter-dependent systems. We introduce the notion of averaged control according to which the quantity of interest is the average of the states with respect to the parameter. First we consider the problem of controllability for linear finite-dimensional systems and show that a necessary and sufficient condition for averaged controllability is an averaged rank condition, in the spirit of the classical rank condition for linear control systems, but involving averaged momenta of any order of the matrices generating the dynamics and representing the control action. We also describe some open problems and directions of possible research, in particular on the average controllability of evolution partial differential equations. In this context we analyze also the averaged version of a classical optimal control problem for a parameter dependent elliptic equation and derive the corresponding optimality system.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The turnpike property infinite-dimensional nonlinear optimal control

  • Trélat, E.
  • Zuazua, E.
Turnpike properties have been established long time ago in finite-dimensional optimal control problems arising in econometry. They refer to the fact that, under quite general assumptions, the optimal solutions of a given optimal control problem settled in large time consist approximately of three pieces, the first and the last of which being transient short-time arcs, and the middle piece being a long-time arc staying exponentially close to the optimal steady-state solution of an associated static optimal control problem. We provide in this paper a general version of a turnpike theorem, valuable for nonlinear dynamics without any specific assumption, and for very general terminal conditions. Not only the optimal trajectory is shown to remain exponentially close to a steady-state, but also the corresponding adjoint vector of the Pontryagin maximum principle. The exponential closedness is quantified with the use of appropriate normal forms of Riccati equations. We show then how the property on the adjoint vector can be adequately used in order to initialize successfully a numerical direct method, or a shooting method. In particular, we provide an appropriate variant of the usual shooting method in which we initialize the adjoint vector, not at the initial time, but at the middle of the trajectory.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Complexity and regularity of maximal energy domains for the wave equation with fixed initial data

  • Privat, Y.
  • Trélat, E.
  • Zuazua, E.
We consider the homogeneous wave equation on a bounded open connected subset Ω of IRn. Some initial data being specified, we consider the problem of determining a measurable subset ω of Ω maximizing the L2-norm of the restriction of the corresponding solution to ω over a time interval [0, T], over all possible subsets of Ω having a certain prescribed measure. We prove that this problem always has at least one solution and that, if the initial data satisfy some analyticity assumptions, then the optimal set is unique and moreover has a finite number of connected components. In contrast, we construct smooth but not analytic initial conditions for which the optimal set is of Cantor type and in particular has an infinite number of connected components.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Output feedback of Markov jump linear systems with no mode observation: An automotive throttle application

  • Vargas, A.N.
  • Acho, L.
  • Pujol, G.
  • Costa, E.F.
  • Ishihara, J.Y.
  • Do Val, J.B.R.
Summary The note presents an output feedback control strategy for Markov jump linear systems with no mode observation. Based on minimizing a finite-time quadratic cost, we derive an algorithm that generates output feedback gains that satisfy a necessary optimality condition. These gains can be computed off-line relying only on the initial condition of the system. This result expands a previous one from the literature that considered state-feedback only. To illustrate the usefulness of the approach, real-time laboratory experiments were performed to control an automotive electronic throttle valve subject to Markov-driven voltage fluctuations.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Time asymptotics for a critical case in fragmentation and growth-fragmentation equations

  • Doumic, M.
  • Escobedo, M.
Fragmentation and growth-fragmentation equations is a family of problems with varied and wide applications. This paper is devoted to the description of the long-time asymptotics of two critical cases of these equations, when the division rate is constant and the growth rate is linear or zero. The study of these cases may be reduced to the study of the following fragmentation equation: ∂ / ∂t u(t, x) + u(t, x) = ∞ ∫ x k0 (x/y )u(t, y)dy. Using the Mellin transform of the equation, we determine the long-time behavior of the solutions. Our results show in particular the strong dependence of this asymptotic behavior with respect to the initial data.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Null controllability for a heat equation with a singular inverse-square potential involving the distance to the boundary function

  • Biccari, U.
  • Zuazua, E.
This article is devoted to the analysis of control properties for a heat equation with a singular potential μ/δ2, defined on a bounded C2 domain Ω⊂RN, where δ is the distance to the boundary function. More precisely, we show that for any μ≤1/4 the system is exactly null controllable using a distributed control located in any open subset of Ω, while for μ>1/4 there is no way of preventing the solutions of the equation from blowing-up. The result is obtained applying a new Carleman estimate.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Geometry shapes propagation: Assessing the presence and absence of cortical symmetries through a computational model of cortical spreading depression

  • Kroos, J.M.
  • Diez, I.
  • Cortes, J.M.
  • Stramaglia, S.
  • Gerardo-Giorda, L.
Cortical spreading depression (CSD), a depolarization wave which originates in the visual cortex and travels toward the frontal lobe, has been suggested to be one neural correlate of aura migraine. To the date, little is known about the mechanisms which can trigger or stop aura migraine. Here, to shed some light on this problem and, under the hypothesis that CSD might mediate aura migraine, we aim to study different aspects favoring or disfavoring the propagation of CSD. In particular, by using a computational neuronal model distributed throughout a realistic cortical mesh, we study the role that the geometry has in shaping CSD. Our results are two-fold: first, we found significant differences in the propagation traveling patterns of CSD, both intra and inter-hemispherically, revealing important asymmetries in the propagation profile. Second, we developed methods able to identify brain regions featuring a peculiar behavior during CSD propagation. Our study reveals dynamical aspects of CSD, which, if applied to subject-specific cortical geometry, might shed some light on how to differentiate between healthy subjects and those suffering migraine.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Large-time behavior of some numerical schemes: application to the sonic-boom phenomenon

  • Pozo, A.
In this thesis we highlight the necessity of employing numerical schemes that preserve the large-time dynamical properties of the continuous system. We focus on Burgers- like equations, which are well known to develop N-waves as intermediate or asymptotic profiles. As we show, not only forward simulations can be distorted; the efficiency of solutions of optimization and inverse design problems might be affected too. In particular, we apply our results to the case of the prediction and control of the sonic- boom phenomenon, modeled by the augmented Burgers equation.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

About the controlability of some equations in Cardiology, Biology, Fluid Mechanics, and Viscoelasticity

  • Chaves-Silva, F.W.
In this thesis we analyze the properties of controllability and observability for selected partial differential equations which model various phenomena in cardiology, biology, fluid mechanics and viscoelasticity. We begin, in chapter 2, with the analysis of the uniform controllability of families of linear coupled parabolic systems approximating parabolic-elliptic systems. We prove, under appropriate assumptions on the coupling terms, the uniform, with respect to the degenerating parameter, null controllability of the family when only one control is acting on the system. In chapter 3, we analyze the uniform null controllability of a family of nonlinear reaction-diffusion systems approximating a nonlinear parabolic-elliptic system model- ing electrical activity in the cardiac tissue. Combining Carleman estimates and energy inequalities, we prove the uniform null controllability of the family by means of a single control. Chapter 4 studies the controllability of the parabolic Keller-Segel system of chemo- taxis which converges to its parabolic-elliptic version. We show that this nonlinear coupled parabolic system is locally uniformly controllable around a solution of the parabolic-elliptic system when the control is acting on the chemical component. In chapter 5, we consider the wave equation with both a viscous Kelvin-Voigt and a frictional damping as a model of viscoelasticity. Decomposing the system in its parabolic and hyperbolic parts, we prove the null controllability of the system when the control region, driven by the flow of an ODE, covers the whole domain. Finally, in chapter 6, we study the cost of controlling the Stokes system to zero. Using a new controllability result for a hyperbolic system with a pressure term and the control transmutation method, we show that the cost of driving the Stokes system to rest at a time $T >0$ is of order $e^{C/T}$ when $T \to 0^+$, as in the case of the heat equation.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Pseudospectral methods and numerical continuation for the analysis of structured population models

  • Sanchez Sanz, J.
In this thesis new numerical methods are presented for the analysis of models in population dynamics. The methods approximate equilibria and bifurcations in a certain class of so called structured population models. Chapter 1 consists of an introduction to structured population dynamics, where the state of the art is presented through a classical consumer-resource model [44]. The necessity of new numerical methods for analyzing structured population models is discussed and motivated by their applications to life sciences. In Chapter 2 [44] is extended to a more general class in which a structured population with a unique state at birth interacts with an environment of unstruc- tured populations and interaction variables. Equilibrium types are defined, the model is linearized and a characteristic equation is obtained. Finally, a discussion about equilibria and bifurcations under parameter variation is included. In Chapter 3 a new pseudospectral method for the computation of eigenvalues of linear VFE/DDE systems is presented. The technique consists of constructing a finite approximation of the infinitesimal generator of the solution semigroup. The spectral convergence of the method is proved, and a piecewise variation which speeds up the computations presented and validated with toy models. An exten- sion to deal with structured population models is proposed and validated with the model in [44]. Chapter 4 is devoted to the numerical continuation of equilibrium branches and bifurcation curves under parameter variation for models of the class presented in Chapter 2. A new technique for the curve continuation is presented, where a reduction of the dimension and a simplification of the equilibrium conditions result in new test functions for the detection of transcritical bifurcations, reducing the computational cost. The methods were implemented in the development of routines that were tested and validated with models from the literature.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

New Theory of Flight

  • Hoffman, J.
  • Jansson, J.
  • Claes, J.
We present a new mathematical theory explaining the fluid mechanics of subsonic flight, which is fundamentally different from the existing boundary layer-circulation theory by Prandtl–Kutta–Zhukovsky formed 100 year ago. The new theory is based on our new resolution of d’Alembert’s paradox showing that slightly viscous bluff body flow can be viewed as zero-drag/lift potential flow modified by 3d rotational slip separation arising from a specific separation instability of potential flow, into turbulent flow with nonzero drag/lift. For a wing this separation mechanism maintains the large lift of potential flow generated at the leading edge at the price of small drag, resulting in a lift to drag quotient of size 15–20 for a small propeller plane at cruising speed with Reynolds number $Re \approx 10^7$ and a jumbojet at take-off and landing with $Re \approx 10^8$, which allows flight at affordable power. The new mathematical theory is supported by computed turbulent solutions of the Navier–Stokes equations with a slip boundary condition as a model of observed small skin friction of a turbulent boundary layer always arising for $Re > 10^6$, in close accordance with experimental observations over the entire range of angle of attacks including stall using a few millions of mesh points for a full wing-body configuration.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Penalized composite link models for aggregated spatial count data: a mixed model approach

  • Ayma, D.
  • Durban, M.
  • Lee, D.J.
  • Eilers, P.H.C.
Mortality data provide valuable information for the study of the spatial distri- bution of mortality risk, in disciplines such as spatial epidemiology and public health. However, they are frequently available in an aggregated form over irreg- ular geographical units, hindering the visualization of the underlying mortality risk. Also, it can be of interest to obtain mortality risk estimates on a finer spatial resolution, such that they can be linked to potential risk factors that are usually measured in a different spatial resolution. In this paper, we propose the use of the penalized composite link model and its mixed model representation. This model considers the nature of mortality rates by incorporating the population size at the finest resolution, and allows the creation of mortality maps at a finer scale, thus reducing the visual bias resulting from the spatial aggrega- tion within original units. We also extend the model by considering individual random effects at the aggregated scale, in order to take into account the overdis- persion. We illustrate our novel proposal using two datasets: female deaths by lung cancer in Indiana, USA, and male lip cancer incidence in Scotland counties. We also compare the performance of our proposal with the area-to-point Poisson kriging approach.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Numerical Bifurcation Analysis of Physiologically Structured Populations: Consumer-Resource, Cannibalistic and Trophic Models

  • Sanchez Sanz, J.
  • Getto, P.
With the aim of applying numerical methods, we develop a formalism for physiologically structured population models in a new generality that includes con- sumer resource, cannibalism and trophic models. The dynamics at the population level are formulated as a system of Volterra functional equations coupled to ODE. For this general class we develop numerical methods to continue equilibria with respect to a parameter, detect transcritical and saddle-node bifurcations and compute curves in parameter planes along which these bifurcations occur. The methods combine curve continuation, ODE solvers and test functions. Finally we apply the method to the above models using existing data for Daphnia magna consuming Algae, and for Perca fluviatilis feeding on Daphnia magna. In particular we validate the methods by deriving expressions for equilibria and bifurcations with respect to which we compute rrors, and by comparing the obtained curves with curves that were computed earlier with other methods. We also present new curves to show how the methods can easily be applied to derive new biological insight. Schemes of algorithms are included.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An efficient approximation to the K-means clustering for Massive Data

  • Capo, M.
  • Pérez, A.
  • Lozano, J.A.
Due to the progressive growth of the amount of data available in a wide variety of scientific fields, it has become more difficult to manipulate and analyze such information. In spite of its dependency on the initial settings and the large number of distance computations that it can require to converge, the $K$-means algorithm remains as one of the most popular clustering methods for massive datasets. In this work, we propose an efficient approximation to the $K$-means problem intended for massive data. Our approach recursively partitions the entire dataset into a small number of subsets, each of which is characterized by its representative (center of mass) and weight (cardinality), afterwards a weighted version of the $K$-means algorithm is applied over such local representation, which can drastically reduce the number of distances computed. In addition to some theoretical properties, experimental results indicate that our method outperforms well-known approaches, such as the $K$-means++ and the minibatch $K$-means, in terms of the relation between number of distance computations and the quality of the approximation., Marco Capó and Aritz Pérez are partially supported by the Basque Government, Elkartek and by the Spanish Ministry of Economy and Competitiveness MINECO: BCAM Severo Ochoa excelence accreditation SVP-2014- 068574 and SEV-2013-0323. José A. Lozano is partially supported by the Basque Government (IT609-13), Elkartek and the Spanish Ministry of Economy and Competitiveness MINECO (TIN2013-41272P).
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Temporal excitation patterns on the cerebral cortex as a result of migraine modeling

  • Kroos, J.M.
  • Diez, I.
  • Cortes, J.M.
  • Stramaglia, S.
  • Gerardo-Giorda, L.
The complex, highly individual, geometry of the cerebral cortex in humans presents a major challenge in studying the spreading of spontaneous neuronal activity. Recent computational advances [1] allow to simulate the propagation of depolarization waves on the macroscale and for individual geometries, reconstructed from accurate medical imaging as MRI, with high levels of detail. In this paper we take advantage of such technique to study the temporal excitation patterns that follow the passage of a depolarization wave on the cerebral cortex., This work was supported by the Bizkaia Talent and European Commission through COFUND under the grant BRAhMS – Brain Aura Mathematical Simulation– (AYD-000- 285), and also by the Basque Government through the BERC 2014-2017 program, and by the Spanish Ministry of Economics and Competitiveness MINECO: BCAM Severo Ochoa excellence accreditation SEV-2013-0323. JMC acknowledges financial support from Ikerbasque: The Basque Foundation for Science and Euskampus at UPV/EHU.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Patient-specific computational modeling of Cortical Spreading Depression via Diffusion Tensor Imaging

  • Kroos, J.M.
  • Marinelli, I.
  • Diez, I.
  • Cortes, J.M.
  • Stramaglia, S.
  • Gerardo-Giorda, L.
Cortical Spreading Depression (CSD), a depolarization wave originat- ing in the visual cortex and traveling towards the frontal lobe, is com- monly accepted as a correlate of migraine visual aura. As of today, little is known about the mechanisms that can trigger or stop such phenomenon. However, the complex and highly individual characteristics of the brain cortex suggest that the geometry might have a significant impact in sup- porting or contrasting the propagation of CSD. Accurate patient-specific computational models are fundamental to cope with the high variability in cortical geometries among individuals, but also with the conduction anisotropy induced in a given cortex by the complex neuronal organisa- tion in the grey matter. In this paper we integrate a distributed model for extracellular potassium concentration with patient-specific diffusivity tensors derived locally from Diffusion Tensor Imaging data., This work was supported by the Bizkaia Talent and European Commission through COFUND under the grant BRAhMS - Brain Aura Mathematical Sim- ulation (AYD-000-285), by the Basque Government through the BERC 2014- 2017 program, and by the Spanish Ministry of Economics and Competitiveness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013- 0323 and the Spanish "Plan Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad" under Grant BELEMET - Brain ELEctro- METabolic modeling and numerical approximation (MTM2015-69992-R). JMC acknowledges financial support from Ikerbasque: The Basque Foundation for Science and Euskampus at UPV/EHU.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On the bound states of Schrödinger operators with

\delta
  • Lotoreichik, V.
  • Ourmières-Bonafos, T.
In dimension greater than or equal to three, we investigate the spectrum of a Schrödinger operator with a $\delta$-interaction supported on a cone whose cross section is the sphere of codimension two. After decomposing into fibers, we prove that there is discrete spectrum only in dimension three and that it is generated by the axisymmetric fiber. We get that these eigenvalues are nondecreasing functions of the aperture of the cone and we exhibit the precise logarithmic accumulation of the discrete spectrum below the threshold of the essential spectrum., V.Lotoreichik is supported by the Czech Science Foundation (GACˇR) under the project 14-06818S. He is grateful for the stimulating research stay and the hospitality at the Basque Center for Applied Mathematics in May 2015 where a part of this paper was written.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Mixed weak type estimates: Examples and counterexamples related to a problem of E. Sawyer

  • Ombrosi, S.
  • Pérez, C.
In this paper we study mixed weighted weak-type inequal- ities for families of functions, which can be applied to study classic operators in harmonic analysis. Our main theorem extends the key result from [CMP2].
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Bootstrap-based procedures for inference in nonparametric ROC regression analysis

  • Rodríguez-Álvarez, M.X.
  • Roca-Pardiñas, J.
  • Cadarso-Suárez, C.
  • Tahoces, P.G.
Before the use of a diagnostic test in a routine clinical setting, the rigorous evaluation of its diagnostic accuracy is an essential step. The receiver operating characteristic (ROC) curve is the measure of accuracy most widely used for continuous diagnostic tests. However, the possible impact of extra information about the patient (or even the environment) on diagnostic accuracy needs to be also assessed. In this paper, attention is focused on an estimator for the covariate-specific ROC curve based on direct regression modelling and nonparametric smoothing techniques. This approach defines the class of generalized additive models for the ROC curve (ROC-GAM). The main aim of the paper is to offer new inferential procedures for testing the effect of co- variates over the conditional ROC curve within the ROC-GAM context. Specifically, two different bootstrap-based tests are suggested to check (a) the possible effect of continuous covariates on the ROC curve; and (b) the presence of factor-by-curve interaction terms. The validity of the proposed bootstrap-based procedures is supported by simulations. To facilitate the application of these new procedures in practice, an R-package, known as npROCRegression, is provided and briefly described. Finally, data derived from a computed-aided diagnostic (CAD) system for the automatic detection of tumour masses in breast cancer is analysed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Quantitative weighted mixed weak-type inequalities for classical operators

  • Ombrosi, S.
  • Pérez, C.
  • Recchi, J.
We improve on several mixed weak type inequalities both for the Hardy-Littlewood maximal function and for Calderón-Zygmund operators. These type of inequalities were considered by Muckenhoupt and Wheeden and later on by Sawyer estimating the $L^{1,\infty}(uv)$ norm of $v^{−1}T(fv)$ for special cases. The emphasis is made in proving new and more precise quantitative estimates involving the $A_p$ or $A_{\infty}$ constants of the weights involved.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Reverse Hölder Property for Strong Weights and General Measures

  • Luque, T.
  • Pérez, C.
  • Rela, E.
We present dimension-free reverse Hölder inequalities for strong $A^{\ast}_p$ weights, $1 \le p < \infty$. We also provide a proof for the full range of local integrability of $A^{\ast}_1$ weights. The common ingredient is a multidimensional version of Riesz’s “rising sun” lemma. Our results are valid for any nonnegative Radon measure with no atoms. For $p = \infty$, we also provide a reverse Ho ̈lder inequality for certain product measures. As a corollary we derive mixed $A^{\ast}_p − A^{\ast}_{\infty}$ weighted estimates., The third author is partially supported by grants UBACyT 20020130100403BA, and PIP (CONICET) 11220110101018.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards efficient 5-axis flank CNC machining of free-form surfaces via fitting envelopes of surfaces of revolution

  • Bo, P.
  • Barton, M.
  • Plakhotnik, D.
  • Pottmann, H.
We introduce a new method that approximates free-form surfaces by envelopes of one-parameter motions of surfaces of revolution. In the context of 5-axis computer numerically controlled (CNC) machining, we propose a flank machining methodology which is a preferable scallop-free scenario when the milling tool and the machined free-form surface meet tangentially along a smooth curve. We seek both an optimal shape of the milling tool as well as its optimal path in 3D space and propose an optimization based framework where these entities are the unknowns. We propose two initialization strategies where the first one requires a user’s intervention only by setting the initial position of the milling tool while the second one enables to prescribe a preferable tool-path. We present several examples showing that the proposed method recovers exact envelopes, including semi-envelopes and incomplete data, and for general free-form objects it detects envelope sub-patches.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Gauss-Galerkin quadrature rules for quadratic and cubic spline spaces and their application to isogeometric analysis

  • Barton, M.
  • Calo, V.M.
We introduce Gaussian quadrature rules for spline spaces that are frequently used in Galerkin discretizations to build mass and stiffness matrices. By definition, these spaces are of even degrees. The optimal quadrature rules we recently derived [6] act on spaces of the smallest odd degrees and, therefore, are still slightly sub-optimal. In this work, we derive optimal rules directly for even- degree spaces and therefore further improve our recent result. We use optimal quadrature rules for spaces over two elements as elementary building blocks and use recursively the homotopy continuation concept described in [5] to derive op- timal rules for arbitrary admissible numbers of elements. We demonstrate the proposed methodology on relevant examples, where we derive optimal rules for various even-degree spline spaces. We also discuss convergence of our rules to their asymptotic counterparts, these are the analogues of the midpoint rule of Hughes et al. [18], that are exact and optimal for infinite domains.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Borderline Weighted Estimates for Commutators of Singular Integrals

  • Pérez, C.
  • Rivera-Ríos, I.P.
In this paper we establish the following estimate \[ w\left(\left\{ x\in\mathbb{R}^{n}\,:\,\left|[b,T]f(x)\right| > \lambda\right\} \right)\leq \frac{c_{T}}{\varepsilon^{2}}\int_{\mathbb{R}^{n}}\Phi\left(\|b\|_{BMO}\frac{|f(x)|}{\lambda}\right)M_{L(\log L)^{1+\varepsilon}}w(x)dx \] where $w\geq0, \, 0<\varepsilon<1$ and $\Phi(t)=t(1+\log^+(t))$. This inequality relies upon the following sharp $L^p$ estimate \[ \|[b,T]f\|_{L^{p}(w)}\leq c_{T}\left(p'\right)^{2}p^{2}\left(\frac{p-1}{\delta}\right)^{\frac{1}{p'}} \|b\|_{BMO} \, \|f \|_{L^{p}(M_{L(\log L)^{2p-1+\delta}}w)} \]where $1<p<\infty, w\geq0 \text{ and } 0<\delta<1.$ As a consequence we recover the following estimate essentially contained in \cite{MR3008263}: \[w\left(\{x\in\mathbb{R}^{n}\,:\,\left|[b,T]f(x)\right| >\lambda\}\right)\leq c_T\,[w]_{A_{\infty}}\left(1+\log^{+}[w]_{A_{\infty}}\right)^{2}\int_{\mathbb{R}^{n}} \Phi\left(\|b\|_{BMO}\frac{|f(x)|}{\lambda}\right)Mw(x)dx\] We also obtain the analogue estimates for symbol-multilinear commutators for a wider class of symbols.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A note on the off-diagonal Muckenhoupt-Wheeden conjecture

  • Cruz-Uribe, D.
  • Martell, J.M.
  • Pérez, C.
We obtain the off-diagonal Muckenhoupt-Wheeden conjecture for Calderón-Zygmund operators. Namely, given $1 < p < q < \infty$ and a pair of weights $(u; v)$, if the Hardy-Littlewood maximal function satisfies the following two weight inequalities: $$ M:L^p(v) \to L^q(u) \quad \mbox{and} \quad M: L^{q'} (u^{1-q'}) \to (v^{1-p'} ); $$ then any Calderón-Zygmund operator $T$ and its associated truncated maximal operator $T_{*}$ are bounded from $M:L^p(v)$ to $L^q(u)$. Additionally, assuming only the second estimate for $M$ then $T$ and $T_{*}$ map continuously $M:L^p(v)$ to $L^{q,\infty}(u)$ We also consider the case of generalized Haar shift operators and show that their off-diagonal two weight estimates are governed by the corresponding estimates for the dyadic Hardy-Littlewood maximal function.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Three Observations on Commutators of Singular Integral Operators with BMO Functions

  • Pérez, C.
  • Rivera-Ríos, I.P.
Three observations on commutators of Singular Integral Operators with BMO functions are exposed, namely 1 - The already known subgaussian local decay for the commutator, namely $\[\frac{1}{|Q|}\left|\left\{x\in Q\, : \, |[b,T](f\chi_Q)(x)|>M^2f(x)t\right\}\right|\leq c e^{-\sqrt{ct\|b\|_{BMO}}}\]$ is sharp, since it cannot be better than subgaussian. 2 - It is not possible to obtain a pointwise control of the commutator by a finite sum of sparse operators defined by $L\log L$ averages. 3 - Motivated by the conjugation method for commutators, it is shown the failure of the following endpoint estimate, if $w\in A_p\setminus A_1$ then $$\left\| wM\left(\frac{f}{w}\right)\right\|_{L^1(\mathbb{R}^n)\rightarrow L^{1,\infty}(\mathbb{R}^n)}=\infty.$$, MTM2012-30748
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Spectral Transitions for Aharonov-Bohm Laplacians on Conical Layers

  • Krejčiřík, D.
  • Lotoreichik, V.
  • Ourmières-Bonafos, T.
We consider the Laplace operator in a tubular neighbourhood of a conical surface of revolution, subject to an Aharonov-Bohm magnetic field supported on the axis of symmetry and Dirichlet boundary conditions on the boundary of the domain. We show that there exists a critical total magnetic flux depending on the aperture of the conical surface for which the system undergoes an abrupt spectral transition from infinitely many eigenvalues below the essential spectrum to an empty discrete spectrum. For the critical flux we establish a Hardy-type inequality. In the regime with infinite discrete spectrum we obtain sharp spectral asymptotics with refined estimate of the remainder and investigate the dependence of the eigenvalues on the aperture of the surface and the flux of the magnetic field.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Improved Quantification of Important Beer Quality Parameters based on Non-linear Calibration Methods applied to FT-MIR Spectra

  • Cernuda, C.
  • Lughofer, E.
  • Klein, H.
  • Forster, C.
  • Pawliczek, M.
  • Brandstetter, M.
During the production process of beer, it is of utmost importance to guarantee a high consistency of the beer quality. For instance, the bitterness is an essential quality parameter which has to be controlled within the specifications already at the beginning of the production process in the unfermented beer (wort) as well as in final products such as beer and beer mix beverages. Nowadays, analytical techniques for quality control in beer production are mainly based on manual supervision, i.e. samples are taken from the process and analyzed in the laboratory. This typically requires significant lab technicians efforts for only a small fraction of samples to be analyzed, which leads to significant costs for beer breweries and companies. Fourier transform mid-infrared (FT-MIR) spectroscopy was used in combination with non-linear multivariate calibration techniques to overcome (i) the time consuming off-line analyses in beer production and (ii) already known limitations of standard linear chemometric methods , like partial least squares (PLS), for important quality parameters [1][2] such as bitterness, citric acid, total acids, free amino nitrogen, final attenuation or foam stability. The calibration models are established with enhanced non-linear techniques based (i) on a new piece-wise linear version of PLS by employing fuzzy rules for local partitioning the latent variable space and (ii) on extensions of support vector regression variants (ε-PLSSVR and ν-PLSSVR), for overcoming high computation times in high-dimensional problems and time-intensive and inappropriate settings of the kernel parameters. Furthermore, we introduce a new model selection scheme based on bagged ensembles in order to improve robustness and thus predictive quality of the final models. The approaches are tested on real-world calibration data sets for wort and beer mix beverages, and successfully compared to linear methods, as showing a clear out-performance in most cases and being able to meet the model quality requirements defined by the experts at the beer company.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Geometric inequalities from phase space translations

  • Huber, S.
  • König, R.
  • Vershynina, A.
We establish a quantum version of the classical isoperimetric inequality relating the Fisher information and the entropy power of a quantum state. The key tool is a Fisher information inequality for a state which results from a certain convolution operation: the latter maps a classical probability distribution on phase space and a quantum state to a quantum state. We show that this inequality also gives rise to several related inequalities whose counterparts are well-known in the classical setting: in particular, it implies an entropy power inequality for the mentioned convolution operation as well as the isoperimetric inequality, and establishes concavity of the entropy power along trajectories of the quantum heat diffusion semigroup. As an application, we derive a Log-Sobolev inequality for the quantum Ornstein-Uhlenbeck semigroup, and argue that it implies fast convergence towards the fixed point for a large class of initial states.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A_1
  • Pérez, C.
  • Rivera-Ríos, I.P.
  • Roncal, L.
Quantitative $A_1-A_\infty$ estimates for rough homogeneous singular integrals $T_{\Omega}$ and commutators of $BMO$ symbols and $T_{\Omega}$ are obtained. In particular the following estimates are proved: \[ \|T_\Omega \|_{L^p(w)}\le c_{n,p}\|\Omega\|_{L^\infty} [w]_{A_1}^{\frac{1}{p}}\,[w]_{A_{\infty}}^{1+\frac{1}{p'}}\|f\|_{L^p(w)} \] and \[ \| [b,T_{\Omega}]f\| _{L^{p}(w)}\leq c_{n,p}\|b\|_{BMO}\|\Omega\|_{L^{\infty}} [w]_{A_1}^{\frac{1}{p}}[w]_{A_{\infty}}^{2+\frac{1}{p'}}\|f\|_{L^{p}\left(w\right)}, \] for $1<p<\infty$ and $1/p+1/p'=1$.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Uniqueness and Properties of Distributional Solutions of Nonlocal Equations of Porous Medium Type

  • Del Teso, F.
  • Endal, J.
  • Jacobsen, E.R.
We study the uniqueness, existence, and properties of bounded distributional solutions of the initial value problem for the anomalous diffusion equation $\partial_tu-\mathcal{L}^\mu [\varphi (u)]=0$. Here $\mathcal{L}^\mu$ can be any nonlocal symmetric degenerate elliptic operator including the fractional Laplacian and numerical discretizations of this operator. The function $\varphi:\mathbb{R} \to \mathbb{R}$ is only assumed to be continuous and nondecreasing. The class of equations include nonlocal (generalized) porous medium equations, fast diffusion equations, and Stefan problems. In addition to very general uniqueness and existence results, we obtain stability, $L^1$-contraction, and a priori estimates. We also study local limits, continuous dependence, and properties and convergence of a numerical approximation of our equations.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Optimal control of the Lotka–Volterra system: turnpike property and numerical simulations

  • Ibañez, A.
The Lotka-Volterra model is a differential system of two coupled equations representing the interaction of two species: a prey one and a predator one. We formulate an optimal control problem adding the effect of hunting both species as the control variable. We analyse the optimal hunting problem paying special attention to the nature of the optimal state and control trajectories in long time intervals. To do that, we apply recent theoretical results on the frame to show that, when the time horizon is large enough, optimal strategies are nearly steady-state. Such path is known as turnpike property. Some experiments are performed to observe such turnpike phenomenon in the hunting problem. Based on the turnpike property, we implement a variant of the single shooting method to solve the previous optimisation problem, taking the middle of the time interval as starting point.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On sums involving Fourier coefficients of Maass forms for SL(3,Z)

  • Jääsaari, J.
  • Vesalainen, E.V.
We derive a truncated Voronoi identity for rationally additively twisted sums of Fourier coefficients of Maass forms for SL(3,Z), and as an application obtain a pointwise estimate and a second moment estimate for the sums in question.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Reconstruction from boundary measurements for less regular conductivities

  • García, A.
  • Zhang, G.
In this paper, following Nachman's idea [14] and Haberman and Tataru's idea [9], we reconstruct $C^1$ conductivity $\gamma$ or Lipchitz conductivity $\gamma$ with small enough value of $|\nabla log\gamma|$ in a Lipschitz domain $\Omega$ from the Dirichlet-to-Neumann map $\Lambda_{\gamma}$. In the appendix the authors and R. M. Brown recover the gradient of a $C^1$-conductivity at the boundary of a Lipschitz domain from the Dirichlet-to-Neumann map $\Lambda_{\gamma}$.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Hidden electronic rule in the "cluster-plus-glue-Atom" model

  • Du, J.
  • Dong, C.
  • Melnik, R.
  • Kawazoe, Y.
  • Wen, B.
Electrons and their interactions are intrinsic factors to affect the structure and properties of materials. Based on the “cluster-cluster-plus-glue-atom” model, an electron counting rule for complex metallic alloys (CMAs) has been revealed in this work (i. e. the CPGAMEC rule). Our results on the cluster structure and electron concentration of CMAs with apparent cluster features, indicate that the valence electrons’ number per unit cluster formula for these CMAs are specific constants of eight-multiples and twelve-multiples. It is thus termed as specific electrons cluster formula. This CPGAMEC rule has been demonstrated as a useful guidance to direct the design of CMAs with desired properties, while its practical applications and underlying mechanism have been illustrated on the basis of CMAs’ cluster structural features. Our investigation provides an aggregate picture with intriguing electronic rule and atomic structural features of CMAs.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A note on the Boltzmann distribution and the linear ordering problem

  • Ceberio, J.
  • Mendiburu, A.
  • Lozano, J.A.
The Boltzmann distribution plays a key role in the field of optimization as it directly connects this field with that of probability. Basically, given a function to optimize, the Boltzmann distribution associated to this function assigns higher probability to the candidate solutions with better quality. Therefore, an efficient sampling of the Boltzmann distribution would turn optimization into an easy task. However, inference tasks on this distribution imply performing operations over an exponential number of terms, which hinders its applicability. As a result, the scientific community has investigated how the structure of objective functions is translated to probabilistic properties in order to simplify the corresponding Boltzmann distribution. In this paper, we elaborate on the properties induced in the Boltzmann distribution associated to permutation-based combinatorial optimization problems. Particularly, we prove that certain characteristics of the linear ordering problem are translated as conditional independence relations to the Boltzmann distribution in the form of L − decomposability.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Estimating attraction basin sizes

  • Hernando, L.
  • Mendiburu, A.
  • Lozano, J.A.
The performance of local search algorithms is influenced by the properties that the neighborhood imposes on the search space. Among these properties, the number of local optima has been traditionally considered as a complexity measure of the instance, and different methods for its estimation have been developed. The accuracy of these estimators depends on properties such as the relative attraction basin sizes. As calculating the exact attraction basin sizes becomes unaffordable for moderate problem sizes, their estimations are required. The lack of techniques achieving this purpose encourages us to propose two methods that estimate the attraction basin size of a given local optimum. The first method takes uniformly at random solutions from the whole search space, while the second one takes into account the structure defined by the neighborhood. They are tested on different instances of problems in the permutation space, considering the swap and the adjacent swap neighborhoods.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Adaptive multi-stage integrators for optimal energy conservation in molecular simulations

  • Fernández-Pendás, M.
  • Akhmatskaya, E.
  • Sanz-Serna, J.M.
We introduce a new Adaptive Integration Approach (AIA) to be used in a wide range of molecular simulations. Given a simulation problem and a step size, the method automatically chooses the optimal scheme out of an available family of numerical integrators. Although we focus on two-stage splitting integrators, the idea may be used with more general families. In each instance, the system-specific integrating scheme identified by our approach is optimal in the sense that it provides the best conservation of energy for harmonic forces. The AIA method has been implemented in the BCAM-modified GROMACS software package. Numerical tests in molecular dynamics and hybrid Monte Carlo simulations of constrained and unconstrained physical systems show that the method successfully realizes the fail-safe strategy. In all experiments, and for each of the criteria employed, the AIA is at least as good as, and often significantly outperforms the standard Verlet scheme, as well as fixed parameter, optimized two-stage integrators. In particular, for the systems where harmonic forces play an important role, the sampling efficiency found in simulations using the AIA is up to 5 times better than the one achieved with other tested schemes., MTM2013-46553-C3-1-P, BES-2014-068640