Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Strain in Halide Perovskites and Solar Cell Stability: Accelerated Stress Tests under Bias Voltage

  • Baumann, Fanny
  • Karimipour, Masoud
  • Padilla-Pantoja, Jessica
  • Chávez-Angel, Emigdio
  • Caicedo, José Manuel
  • Pouteaux, Rémy
  • Alcalá Ibarra, Alex
  • Raga, Sonia R.
  • Santiso, José
  • Lira-Cantú, Mónica
The lifespan of halide perovskite solar cells (PSCs) is currently a major concern for the implementation and commercialization of the technology. Tensile and compressive strain alters the halide perovskite (HP) lattice under operando conditions, affecting PSC stability. However, the mechanisms governing strain responses are still unknown. In this work, we monitored the evolution of strain in PSCs during accelerated stability tests under continuous light irradiation and bias-voltage. Additive engineering led to a compression of the HP lattice, improving PSC stability. The temporal evolution of the HP lattice, together with the electrical response of devices employing modified and reference HP, was tracked by in situ X-ray diffraction, photoluminescence, and quasi in situ electrochemical impedance spectroscopy. Our results demonstrate a good correlation between lattice expansion (strain) and the device's current decay and stability. Additionally, and contrary to the current understanding, we observed that lattice compression in HP was not sufficient to ensure protection against degradation., We thank Prof. Anita Ho-Baillie and Dr. Jae Sung Yun for constructive comments on electrode fabrication. This work was supported by the Spanish Ministry of Science and Innovation (MCIN) and the AEI under the Project No. PID2022-143344OB-I00. This work constitutes part of the Materials Science Ph.D. Program for F.B. at the Universitat Autonoma de Barcelona (UAB, Spain), and the authors acknowledge the Spanish Ministry of Science and Innovation for providing the predoctoral contract to F.B. with reference No. PRE2020-092669 of the Project No. SEV-2017-0706-20-3. S.R.R. acknowledges the support from “la Caixa” Foundation (ID 100010434) with fellowship LCF/BQ/PI20/11760024 and Grant PID2021-122349OAI00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe. ICN2, including the postdoctoral contract to M.K., was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Thanks are extended to Agencia de Gestio d’Ajuts Universitaris i de Recerca for Grant No. SGR 01617 and the Xarxa d’ R + D + I Energy for Society. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. E.C.A. acknowledges support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. We would like to thank Dámaso Torres for his assistance with graphical design., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Spin-orbit torque emerging from orbital textures in centrosymmetric materials

  • Canonico, Luis M.
  • García Aguilar, José H.
  • Roche, Stephan
We unveil a hitherto concealed spin-orbit torque mechanism driven by orbital degrees of freedom in centrosymmetric two-dimensional transition metal dichalcogenides (focusing on PtSe<inf>2</inf>). Using first-principles simulations, tight-binding models, and large-scale quantum transport calculations, we show that such a mechanism fundamentally stems from a spatial localization of orbital textures at opposite sides of the material, which imprints their symmetries onto spin-orbit coupling effects, further producing efficient and tunable spin-orbit torque. Our study suggests that orbital-spin entanglement at play in centrosymmetric materials can be harnessed as a resource for outperforming conventional spin-orbit torques generated by the Rashba-type effects., We acknowledge discussions with A I Figueroa, J F Sierra, S O Valenzuela, and T G Rappoport. L M C acknowledges funding from Ministerio de Ciencia e Innovación de España under Grant Nos. PID2019-106684GB-I00/AEI/10.13039/501100011033, FJC2021-047300-I, financiado por MCIN/AEI/10.13039/501100011033 and the European Union ‘NextGenerationEU/PRTR’. S R and J H G, acknowledge funding from the FLAG-ERA Grant MNEMOSYN, by MCIN/AEI /10.13039/501100011033 and European Union ‘NextGenerationEU/PRTR’ under Grant PCI2021-122035-2A-2a. JHG acknowledges funds from the European Research Council Executive Agency under grant agreement No 101078370 - AI4SPIN .ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. This work is also supported by MICIN with European funds-NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Engineering Ge Profiles in Si/SiGe Heterostructures for Increased Valley Splitting

  • Stehouwer, Lucas E. A.
  • Losert, Merrit P.
  • Rigot, Maia
  • Degli Esposti, Davide
  • Martí-Sànchez, Sara
  • Rimbach-Russ, Maximillian
  • Arbiol, Jordi
  • Friesen, Mark
  • Scappucci, Giordano
Electron-spin qubits in Si/SiGe quantum wells are limited by the small and variable energy separation of the conduction-band valleys. While sharp quantum-well interfaces are pursued to increase the valley-splitting energy deterministically, here we explore an alternative approach to enhancing the valley splitting on average. We grow increasingly thinner quantum wells with broad interfaces to controllably increase the electron wave function overlap with Ge atoms. Quantum Hall measurements of two-dimensional electron gases reveal a linear correlation between valley splitting and disorder-induced single-particle energy-level broadening, driven by increasing alloy scattering at the Si/SiGe interface. We demonstrate enhanced valley splitting while maintaining respectable electron mobility, indicating a low-disorder electrostatic potential environment. Simulations using experimental Ge concentration profiles predict an average valley splitting in quantum dots that matches the enhancement observed in two-dimensional systems. Our results motivate the experimental realization of quantum-dot spin qubits in these heterostructures., This work was supported by The Netherlands Organisation for Scientific Research (NWO/OCW), via the Frontiers of Nanoscience program Open Competition Domain Science M program. We acknowledge support by the European Union through the IGNITE project with Grant 101069515 and the QLSI project with Grant 951852. This research was sponsored in part by the Army Research Office (ARO) under Grants W911NF-23-1-0110 and W911NF-22-1-0090. The views, conclusions, and recommendations contained in this document are those of the authors and are not necessarily endorsed, nor should they be interpreted as representing the official policies, either expressed or implied, of the ARO or the U.S. Government. The U.S. Government is authorized to reproduce and distribute reprints for Government purposes notwithstanding any copyright notation herein. This research was sponsored in part by The Netherlands Ministry of Defense under Awards No. QuBits R23/009. The views, conclusions, and recommendations contained in this document are those of the authors and are not necessarily endorsed, nor should they be interpreted as representing the official policies, either expressed or implied, of The Netherlands Ministry of Defense. The Netherlands Ministry of Defense is authorized to reproduce and distribute reprints for Government purposes notwithstanding any copyright notation herein. ICN2 acknowledges funding from the Generalitat de Catalunya 2021SGR00457. We acknowledge support from the CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+). This research work has been funded by the European Commission, NextGenerationEU (Regulation EU 2020/2094), through CSIC’s Quantum Technologies Platform (QTEP). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as technical advice provided by the Joint Electron Microscopy Center at ALBA. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB), funded by the European Union through the European Regional Development Fund, with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Streaming flexoelectricity in saline ice

  • Wen, Xin
  • Ma, Qianqian
  • Liu, Jingran
  • Saeed, Umair
  • Shen, Shengping
  • Catalán, Gustau
Despite 10% of the Earth's surface being covered by ice, ice power remains untapped. Although ice is known to generate electricity upon bending via flexoelectricity1, the generated electric polarization per curvature, that is, the flexoelectric coefficient, is too small (~1-10 nC m-1) to be utilized for electromechanical devices. Here we demonstrate that doping ice with NaCl can enhance its flexoelectric coefficient 1,000-fold, to ~1-10 μC m-1. We find that this enhancement is due to the bending-induced streaming current along ice grain boundaries. On the basis of this mechanism, we fabricated flexural devices with an effective piezoelectric coefficient of ~4,000 pC N-1, which is comparable to that of the best piezoelectric materials. The high flexoelectricity of saline ice brings the vision of harnessing ice power one step closer to reality, and may also be relevant to the electrical activity of ice-covered terrestrial regions and icy ocean worlds such as Europa or Enceladus. In addition, the model for coupling between strain gradients and streaming currents is not limited to ice and provides a general framework for extracting electromechanical activity from liquid-infused porous solids., G.C. acknowledges financial support from the Catalan government (no. 2021 SGR 0129) and from the National Research Agency (Agencia Estatal de Investigación, no. PID2023-148673NB-I00). All research at ICN2 is supported by the Severo Ochoa Centres of Excellence programme (no. CEX2021-001214-S). S.S. acknowledges support from the 111 Project of China (no. B18040) and the National Natural Science Foundation of China (grant no. 12090030). X.W. acknowledges support of the Juan de la Cierva fellowship (no. JDC2022-048192-I) funded by MICIU/AEI/10.13039/501100011033 and by European UnionNextGenerationEU/PRTR. Q.M. acknowledges support from the National Natural Science Foundation of China (no. 123B2027)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Accurate and Fast Thermal Sensing via Phase-Responsive Nanothermometers and Neural Networks

  • París Ogáyar, Marina
  • Ming, Liyan
  • Zhang, Fengchan
  • Ximendes, Erving
  • Marin, Riccardo
  • Lifante-Pedrola, Ginés
  • Serrano Rubio, Aída
  • Espinosa, Ana
  • Haro-González, Patricia
  • Hernando, Jordi
  • Ruiz Molina, Daniel
  • Otaegui, Jaume R.
  • Roscini, Claudio
  • Jaque, Daniel
Accurate, rapid, and remote temperature sensing at the nanoscale is essential for applications ranging from monitoring cellular thermodynamics to thermal management of microelectronic devices. Luminescent nanothermometers are promising candidates; however, their deployment is hindered by limited thermal sensitivity and cross-sensitivity to environmental factors that mimic temperature-induced luminescence changes. We introduce fluorescent chromatic nanoswitchers (CNSs), comprising silica nanocapsules incorporating a fluorescent dye within a thermoresponsive matrix. The matrix undergoes a solid-to-liquid phase transition, yielding an exceptional fluorescence lifetime sensitivity of 19% °C-1 at 37 °C. Crucially, the lifetime-based thermal readout provided by CNSs is resistant to environmental interference, ensuring reliable, reproducible temperature measurements. To enhance CNS performance, we integrate artificial neural networks (ANNs) for advanced lifetime signal processing, enabling faster and robust thermal readouts. Proof-of-concept experiments show that the synergy between high-sensitivity lifetime-based nanothermometers and ANN-driven analysis paves the way for next-generation thermal sensing technologies, offering improved responsiveness, real-time capabilities, and enhanced accuracy., M.P.O. acknowledges the financial support from MICINN for an FPU (FPU20/03166). L.M. acknowledges a scholarship from the China Scholarship Council (202108350018). F.Z. acknowledges a scholarship from the China Scholarship Council (202108440235). E.X. thanks the Community of Madrid for Project SI4/PJI/2024-00130 through a direct grant with Universidad Autónoma de Madrid and also acknowledges support from Grant RYC2023-044309-I, funded by MICIU/AEI (10.13039/501100011033) and the FSE. This work was supported by Grant PID2024-161565OB-C21 funded by MICIU/AEI/10.13039/501100011033/FEDER, UE, and CNS2022-135495 and PID2023-151078OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.501100011033. R.M. is grateful to the Spanish Ministerio de Ciencia, Innovación y Universidades for support to research through a Ramón y Cajal Fellowship (RYC2021-032913-I) and Project PID2022- 14210NA-I00 (NAMASTEPS) funded by MICIU/AEI/10.13039/5011000 11033 and by FEDER, EU. The ICMM-CSIC acknowledges support from the Severo Ochoa Centres of Excellence Program, Grant CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033. The UAB thanks the support from MICIU/AEI/10.13039.501100011033 (PID2022-141293OB-I00) and Generalitat de Catalunya (2021 SGR 00064 project). J.R.O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. A.S. acknowledges financial support from Grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and Project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. A.E. acknowledges financial support from Project PID2024-161273OB-C21 funded by MCIN/AEI/10.13039/501100011033 and CNS2023-144689 funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001445-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Engineering p-d Coupling at Fe-Bi and Zn-Bi Sites for Efficient Li-S Conversion

  • Yu, Jing
  • Liang, Zhifu
  • Zhou, Xianggui
  • Zhang, Chaoqi
  • Pinto, Iván
  • Usoltsev, Oleg
  • Zhang, Chao Yue
  • Robertson, Alex W.
  • Cabot, Andreu
  • Arbiol, Jordi
Electrocatalytic sulfur hosts are crucial for high-performance, lightweight lithium-sulfur (Li-S) batteries, demanding atomically dispersed metals with precisely tuned electronic structures. Here, we present 3d-6p dual-atom catalysts (DACs) composed of earth-abundant Fe-Bi or Zn-Bi pairs anchored on nitrogen-doped carbon. Aberration-corrected scanning transmission electron microscopy and X-ray absorption spectroscopy confirm atomically dispersed bimetallic centers stabilized through TM-N coordination. In Li-S cells, DACs, particularly Fe-Bi, markedly accelerate polysulfide conversion, achieving near-ideal discharge plateau ratios, superior rate capability with >50% capacity retention at 3C, and about 80% retention after 1000 cycles at 1C. Density functional theory indicates that Bi induces strong ligand-field and p-d coupling effects, shifting Fe 3d states toward the Fermi level and polarizing Zn through charge redistribution. This Bi-driven cooperative activation transcends d-electron limitations, offering a general and scalable route to high-rate, durable Li-S electrocatalysts., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge support of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. IREC acknowledges funding from CERCA Programme/Generalitat de Catalunya, Generalitat de Catalunya 2021SGR01581, SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), and European Union NextGenerationEU/PRTR. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.Y. has received funding from the CSC-UAB PhD scholarship program. I.P.-H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). Authors thank the beamtime at CLAESS beamline in ALBA Synchrotron. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (22), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Vortices and antivortices in antiferroelectric PbZrO3

  • Liu, Ying
  • Zhang, Huazhang
  • Shapovalov, Konstantin
  • Niu, Ranming
  • Cairney, Julie M.
  • Liao, Xiaozhou
  • Roleder, Krystian
  • Majchrowski, Andrzej
  • Arbiol, Jordi
  • Ghosez, Philippe
  • Catalán, Gustau
Ferroelectric materials are characterized by a parallel arrangement of electric dipoles, but at the nanoscale they can present vortices and other non-trivial topological structures1-9 that combine small size and topological protection, rendering them functionally attractive10-13. The driving force for the appearance of vortices in ferroelectrics is the need to minimize the depolarizing fields at interfaces3-5,14; by making the polarization rotate, depolarization fields vanish4,5,8,9. Antiferroelectrics, by contrast, are defined by an antiparallel arrangement of electric dipoles15. A priori, therefore, they lack the depolarization fields that drive the appearance of non-trivial topologies in ferroelectrics. At the atomic scale of the dipoles, however, we find that polar discontinuities can still happen, driving the appearance of topological singularities at ferroelastic domain walls., We thank J. Hlinka for insights about domain-wall motion. This work was funded by the FET-Open programme of the EU, project Topological Solitons in Antiferroics (TSAR). Y.L. acknowledges the BIST Postdoctoral Fellowship Programme (PROBIST) funded by the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement number 754510. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant number CEX2021-001214-S. G.C. acknowledges financial support from the Catalan government (grant number 2021 SGR 0129), and from the National Research Agency (Agencia Estatal de Investigación), project number PID2023-148673NB-I00. K.R. was supported by the National Science Centre, Poland, grant number 2022/47/B/ST3/02778. P.G. and K.S. acknowledges support from F.R.S. FNRS Belgium under PDR grant T.0107.20 (PROMOSPAN). H.Z. acknowledges the Research IPD STEMA Program of University of Liège. Simulations were performed at the CECI supercomputer facilities funded by the F.R.S. FNRS (grant number 2.5020.1) and also made use of the Tier-1 supercomputer of the Fédération Wallonie-Bruxelles funded by the Walloon Region (grant number 1117545). We are grateful for the scientific and technical support from the Australian Centre for Microscopy and Microanalysis (ACMM) as well as the Microscopy Australia node at the University of Sydney., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Label-Free Photonic Biosensors: Key Technologies for Precision Diagnostics

  • Soler, María
  • Lechuga, Laura M.
With the rise of multidrug-resistant pathogens, emerging zoonotic viruses, and the increasing prevalence of cancer, the modernization of clinical diagnostics has become a critical priority. Label-free optical biosensors, including those based on plasmonics and silicon photonic technologies, offer promising solutions for highly sensitive molecular analysis, rapid assay times, and decentralized operation. However, important challenges must be addressed for their successful clinical implementation, including the miniaturization and integration in compact, automated devices and the direct analysis of complex human specimens, like blood. In this context, an overview of recent advancements and future perspectives in photonic biosensors are provided for clinical diagnostics. The critical limitations of these technologies are examined, and specific research objectives that need to be met to fully leverage the potential of photonic biosensors and accelerate their adoption in the clinical practice are proposed. Finally, the most innovative biosensor designs and methodologies are highlighted, along with their prospects for contributing to precision diagnosis and personalized medicine., M.S. acknowledges the economic support of the Ramon y Cajal Grant (RYC2020-029015-I) funded by the AEI/MCIN and the European Union NextGenerationEU/PRTR. The ICN2 is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. ICN2 is funded by the CERCA programme (Generalitat de Catalunya). The NanoB2A group is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament de Recerca i Universitats de la Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

LightNET Carbon Capture CO2atings and CO2rallites: A circular ex-situ mineralization route for CO2 capture, sequestration, and product valorization

  • Pérez-Tomás, Amador
  • Pastor-Andreu, Pedro
  • Bujaldón, Marina
  • Argemi, Alex
  • Nieva, Claudia
  • Arbiol, Jordi
  • Rique, Eugenia
  • Mas-Castella, Jordi
  • Garrell, Enric
  • Negre Medall, Francisco
Carbon capture market worldwide has experienced a significant growth in recent years driven by increasing concerns about climate change and the need to reduce greenhouse gas emissions. LightNET Carbon Capture S.L. (LNCC) is a company whose purpose is to help Catalan, Spanish, EU, and global companies to become carbon neutral by sequestering and valorizing CO2 at the emission point and/or directly from the air. LNCC ex-situ CO2 removal strategies are focused on speed up reactions to occur on human timescales of several decades or faster to meet long-term international climate targets. We have developed innovative material solutions that can be developed into products that will capture CO2 at a faster rate and efficiency than current point source capture and direct air capture absorbers. Here, two different products are presented: (1) CO2ating®: a coating layer for any kind of surface that captures CO2 until its saturation. (2) CO2rallite®: a replaceable element that captures CO2 until its saturation and then may be replaced. Proof-of-concept and prototypes (TRL 6-7) are presented engaging global building industry improving education, bringing awareness as well as human and institutional capacity in relation to climate change reduction of effects and early warning., We acknowledge Escola Pia de Sitges, Sitges (Núria Mestre Pérez); Escola Pau Casals, El Vendrell (Aurora Ventosa Calbet); INS Bosc de la Coma, Olot (Ferran Pellicer Rodríguez); and Institut Escola Greda, Olot (Marta Cullell Busquets) for providing materials for this publication., We also acknowledge Institut Josefina Castellví i Piulachs, Viladecans (Raquel Campos Castán); INS La Sureda, Palafrugell (Sara Gabarrón, Meritxell Cruañas, Oriol Colldecarrera); INS Cubelles, Cubelles, (Ana Ponce León, Elisenda Vidal Sans); Fundación Educativa Amor de Déu, Sant Adrià de Besòs, (Luis Jalón Hidalgo); Escola Consol Ferré, Amposta (Sandra Solà); Escola Bergantí, El Masnou (Toni Garcia); Escola Eladi Homs, Valls (Goretti Andreu); Escola Paidos, Sant Fruitós de Bages (Isabel Morraja Leiguarda); INS Alexandre de Riquer, Calaf (Ariadna Segura Duch); Escola Vilanova de Segrià, Vilanova de Segrià (Alícia Morlans Ballesté); Escola Josep Barceló i Matas, Palafrugell (Ruben Vargas Quiñones); Institut Alt Foix, Sant Martí Sarroca (Isabel Moreno Verbo); Col·legi Vedruna Santa Coloma de Queralt, Santa Coloma de Queralt (Maria Teresa Soler Casellas); Institut de Deltebre, Deltebre (Aida Fibla Tomàs); Institut Puig Castellar, Santa Coloma de Gramenet (Carolina Saniger Merino); Institut La Ferreria, Montcada i Reixac (Manuel Serafín Ramiro Trenado); Col·legi Les Savines, Cervera (Edgar Rodero Roig); Col·legi Sant Josep, Reus (Mercè Civit Salvat, Isidre Torroja Capdevila); Escola El Rajaret - ZER Montgrí, Bellcaire d’Empordà (Lluïsa Piferrer Morer); Institut Escola Greda, Olot (Marta Cullell Busquets); Col·legi Vedruna Manlleu, Manlleu (Ingrid Vilalta Rovira); Institut Can Mas, Ripollet (Cira Garcia Ros); Escola Catalunya, Sant Adrià de Besòs (Dina Frias); Institut Miquel Martí i Pol, Cornellà de Llobregat (Maria Belmonte); FEDAC Guissona, Guissona (Rosa M Morros Vives); Institut Gelida, Gelida (Rosa Perarnau Ramos); INS Terra Alta, Gandesa (Núria Gisbert Bueno); INS Vilamajor, Sant Pere de Vilamajor, (Irene Fraile Torroella); Institut Pons d’Icart, Tarragona (Cristina Arqué); Institut Vacarisses, Vacarisses (Dulcenombre Medina López); IE Caritat Serinyana Cap de Creus, Cadaqués (Marina Fortea Esparza); INS Anton Busquets i Punset, Sant Hilari Sacalm, (Josep Broch Muñoz); Escola Pi Verd, Palafrugell (Ernest Serra Soler); Institut de L’Arboç, L’Arboç (Mercè Pagan Polo, Maite Morales Secanella); Escola Els Roures - ZER Gavarresa, Sant Feliu Sasserra (Cèlia Soldevila); Institut Pere Barnils, Centelles (David García); INS Poeta Maragall, Barcelona (Àngel Pérez Beroy, Susana Colomer Domènech); Col·legi Vedruna Cardona, Cardona (Mercè Boixadera de León), IES Can Peixauet, Santa Coloma de Gramanet (Daniel Ramil Ramos); INS Pobla de Segur, La Pobla de Segur (Montse Martínez Palacín); INS Santiago Sobrequés i Vidal, Girona (Mian Vich Homs); Institut Bisbe Berenguer, L’Hospitalet de Llobregat (Núria Sanz Casañas); Ins Lacetània, Manresa (Marta Santaulària Rosell); Institut Jaume Salvador i Pedrol, Sant Joan Despí (Xavier Monje Vega); Institut Sant Pere i Sant Pau, Tarragona (Ester Borrell); Institut Berenguer d’Entença, L’Hospitalet de l’Infant (Jaume Espuny Casademunt, Lourdes Gil Pagà); INS Vescomtat de Cabrera, Hostalric (Montse Jordà, Maria Tomàs i Vives); Escola l’Alzina, Molins de Rei (Luis Garrido Bujardón); Institut Guillem de Berguedà, Berga (Ferran Barroso Boixader); Escola Mont-roig, Balaguer (Cristina Carbonell Figuerola); Escola Sant Vicenç, Mollet del Valles (Montse Farell Pastor); Escola Consol Ferré, Amposta (Sandra Solà); INS Montgrí, Torroella de Montgrí (Conxi Camúñez Garcia); Institut del Voltreganès, Les Masies de Voltregà (Anna Folch Albareda); Sant Antoni Maria Claret, Cornellà de Llobregat (Rosalia Donaire Pena); Escola El Rajaret - ZER Montgrí, Bellcaire d’Empordà (Lluïsa Piferrer Morer); Bernat Metge, El Prat de Llobregat (Olga Ruiz Mariscal); Escola Marjal, Les Cases d’Alcanar (Joel Roig Fornós); Escola Santa Caterina, Vinyols i els Arcs (Anna Escudé Recasens); Les Eres, Vinebre (Miguel Segura Caelles); FEDAC Súria, Súria (Manoli Garcia Soler); Escola Mare de Déu de la Roca, Mont-roig del Camp (Ernest Frigola Olives); Institut Sunsi Móra (Canet de Mar); Eulàlia Salichs Fradera; Ins El Pont de Suert, El Pont de Suert (Ester Parache Palacín, Cristian Fondevilla, Arnau Pueyo); Escola Sant Joan, Berga (Mònica Corominas Camprubí); and Institut Martí Pous, Sant Adrià, Barcelona (Anna Saperas Morón) for participation and feedback on LightNET - Fundació Catalana per a la Recerca i la Innovació (FCRI) Setmana de la Ciència (2023). We thank Salva Ferré and Bea Cordero from EDUSCOPI (Agència de Comunicació Científica) for composing the didactic materials., This work was partially supported by grants ajuts d’Indústria del Coneixement under Grant Nos. (IdC) AGAUR INNOVADORS 2023 (INNOV 00069) and IdC AGAUR PRODUCTE 2024 (Professor 00147 METHAFILTER); Grant Nos. AGAUR SGR 2021_SGR_00496, AGAUR SGR 2021_SGR_00457 and ACCIÓ innovació oberta i disruptiva; Grant No. ACE139/24/000076, funded by the Generalitat de Catalunya. Colaboración Público-Privada (Programa CSIC COCREA-CONVERGE) Convocatoria 2024 COCRE24034 (ESCO2RIAS). Maria de Maeztu; and Grant No. CEX2023-001397-M funded by Grant No. MICIU/AEI/10.13039/501100011033. ICN2 is funded by the CERCA programmme/Generalitat de Catalunya and by the Severo Ochoa Centres of Excellence programme under Grant No. CEX2021-001214-S., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrochemical Nucleation and Growth in Battery Electrodes under Reactant-Limited Conditions

  • Yu, Jing
  • Martynova, Irina
  • Li, Zeyan
  • Li, Canhuang
  • Zhang, Chaoqi
  • Sun, Qing
  • Arbiol, Jordi
  • Cabot, Andreu
Nucleation and growth of solid phases from species dissolved in an electrolyte govern battery performance, defining capacity, efficiency, rate capability, stability, and safety. However, classical nucleation-growth models often do not realistically describe working cells, failing to capture highly asymmetric out-of-plane growth and finite reactant supply. Here, we introduce a nucleation-growth model to fit potentiostatic nucleation transients that explicitly accounts for a finite amount of reactant and its depletion, reproducing the characteristic current rise upon nucleation, peak, and subsequent decay without ad hoc corrections. Both instantaneous nucleation and progressive nucleation are considered. The model is applied to the nucleation and growth of Li2S at a catalyzed electrode from a lithium polysulfide solution, yielding nucleus densities of up to 6.7 × 109 cm-2 and an effective reaction rate constant of 1.8 × 10-3 s-1. Beyond Li-S batteries, the framework can be extended to other conversion and metal-deposition chemistries in which finite-supply effects dominate., IREC acknowledges funding from CERCA Programme/Generalitat de Catalunya, Generalitat de Catalunya 2021SGR01581, SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), and European Union NextGenerationEU/PRTR. This work was partially funded by the European Union (Grant Agreement 101104006 - HEALING BAT - HORIZON-CL5-2022-D2-01). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors are thankful for the support from project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science Ph.D. program. J.Y. has received funding from the CSC-UAB Ph.D. scholarship program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. (17), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Hexagonal Boron Nitride for Nanoscale Heat Dissipation in Electronic and Photonic Chips

  • Liu, Bohai
  • Farina, Riccardo
  • Świniarski, Michał
  • Kwapiński, Wiktor
  • De La Bastida Chiza, Ronny Omar
  • Tilburg, Marvin van
  • Jansen, Marvin Marco
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Bakkers, Erik P. A. M.
  • Haverkort, Jos E. M.
  • Tielrooij, Klaas-Jan
Efficient heat dissipation is critical for chip components, in particular around (sub)microscopic regions with locally elevated power densities, where performance degradation and failure can originate. Here, we experimentally demonstrate enhanced heat dissipation using hexagonal boron nitride (hBN) flakes and heterostructures on gold nanostrips and hexagonal SiGe nanowires. These nanoscale building blocks for electronic and photonic chips simultaneously serve as local temperature sensors. We transferred flakes using dry transfer, ensuring pristine interfaces. Covering gold nanostrips with hBN flakes or hBN/graphene/hBN stacks decreases the temperature ramp rate by up to 40%, and increases the breakdown current density by up to 30%. This occurs through improved in-plane heat dissipation, according to our simulations. Covering hexagonal SiGe nanowires with hBN decreases the operating temperature by up to 500 K under optical excitation, due to improved thermal boundary conductance. These findings pave the way for targeted thermal management in miniaturized electronic and photonic devices., We thank Yuqing Jiao for discussions. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. K.-J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. ERC-2022-POC-101069363 (“COOLGRAELE”) and No. ERC-2023-CoG-101125457 (“EQUATE”). This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement number 964191, Opto Silicon and the Dutch Organization for Scientific Research (NWO) Grant OCENW.M.21.052. K.W. and T.T. acknowledge support from the JSPS KAKENHI (Grant Numbers 21H05233 and 23H02052), the CREST (JPMJCR24A5), JST and World Premier International Research Center Initiative (WPI), MEXT, Japan., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Reviving Air Electrodes in Protonic Ceramic Cells by Unlocking Subsurface

  • Lin, Haoqing
  • Li, Bing
  • Luo, Shunrui
  • Ding, Yong
  • Li, Tongtong
  • Yuan, Tenghui
  • Peng, Chaoxia
  • Pei, Kai
  • Zhou, Yucun
  • Jiang, Simin
  • Luo, Shasha
  • Arbiol, Jordi
  • Chen, Yu
  • Yuan, Wei
  • Liu, Enzuo
  • Liu, Meilin
  • Zhao, Bote
Protonic ceramic electrochemical cells (PCECs) show promise for efficient hydrogen production and power generation, yet surface degradation of perovskite air electrodes caused by A-site cation segregation poses a challenge. Rather than suppressing surface segregation, this work leverages the opportunity, unlocking the latent potential of the catalytically active, B-site-enriched subsurface beneath the segregated surface layers. Using PrBa<inf>0.5</inf>Sr<inf>0.5</inf>Co<inf>1.5</inf>Fe<inf>0.5</inf>O<inf>5+δ</inf> (PBSCF) as a model electrode, we expose a subsurface enriched with oxygen vacancies through an alkaline treatment. As a result, the electrolysis current density increases by 28% at 1.3 V and the peak power density improves by 24% at 650 °C in reversible PCEC operation, while maintaining stability. These improvements arise from enhanced H<inf>2</inf>O/O<inf>2</inf> adsorption and dissociation, and facilitated charge transfer, supported by experimental and theoretical analysis. This surface activation strategy is further validated across multiple perovskite air electrodes, demonstrating a general approach to revive segregated electrodes by harnessing the self-reconstructed subsurface., This work was supported by the National Key R&D Program of China (2021YFA1502400), the Introduced Innovative R&D Team of Guangdong (2021ZT09L392), the National Natural Science Foundation of China (52102248, 22479050), the Guangdong Basic and Applied Basic Research Foundation (2025A1515011944, 2022A1515010231), the Guangzhou Basic Research Projects (Basic and Applied Basic Research Projects) (2023A04J1568), the Fundamental Research Funds for the Central Universities (2024ZYGXZR067), and HuaHydro Horizon Energy (Guangdong) Co. Ltd. M.L. acknowledges the generous support of Phillips 66 and the Hightower Endowment through the Georgia Tech Foundation. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Kinetic model of complete reconstruction of zigzag graphene edge [Software]

  • Lebedeva, Irina
Copyright 2026 Irina V. Lebedeva. --Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0, Features: - Stochastic nucleation: Randomly creates 57 seeds at pristine zigzag edge regions. - Domain growth: Simulates the expansion of reconstructed domains into the pristine edge. - Coalescence & merging: Handles the meeting of adjacent domains, including instantaneous annihilation of specific defect configurations. - Annihilation kinetics: Tracks the long-term diffusion and annihilation of residual defects at various temperatures. - Data export: Generates detailed CSV files for domain length distributions and time-resolved defect counts., Prerequisites: - Python 3.8 or higher - NumPy, Usage: You can run the script with default parameters or specify custom simulation settings using command-line arguments. Bash python script_domains.py To run a simulation at 900K with a larger system size and redirected output: Bash python script_domains.py --temp 900 --cell_length 3000000 --max_loops 30 > simulation.log, Optional Arguments: Argument Type Default Description --cell_length int 3000000 Number of polygons at the edge --temp float 1000 Simulation temperature in Kelvin --time_zero_6 float 2000 Number of time steps to setting the concentration of 6 defects to zero --total_time float 100000 Total time limit in time steps for 6 defect diffusion --max_loops int 20 Number of simulation iterations to average, Output Files: The script generates several files to help analyze the reconstruction process: - domains.out: Real-time log of domain counts and total reconstructed length during the domain growth and coalescence phase. - domains_dist.csv: A histogram of domain lengths across various stages (after initial reconstruction, merging of domains with the same orientation of 57 pairs, simultaneous annihilation of 6 and 7557 defects, etc.). - evolution_[Temp]K_[Loop].csv: Time-resolved defect counts (num_6, num_7557, etc.) for each simulation run. - domains_summary: A text summary containing average lengths, mean squared lengths, and average defect lifetimes., IL acknowledges support from the EuroHPC JU under the MAX (Materials design at the Exascale) project (grant no. 101093374), and from the Spanish MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR through grant no. PCI2022-134972-2. ICN2 is supported by the CERCA programme (Generalitat de Catalunya) and the Severo Ochoa Centres of Excellence programme (grant no. CEX2021-001214-S), funded by MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Phonon-Dominated In-Plane Thermal Conductivity of Single-Flake Metallic Ti3C2Tx MXene

  • Hemert, Max van
  • Ramsden, Hugh
  • Ippolito, Stefano
  • Varghese, Sebin
  • Liu, Bohai
  • Tornero Gasca, Elvira
  • Muñoz Rojo, Miguel
  • Wang, Hai I.
  • Gogotsi, Yury
  • Tielrooij, Klaas-Jan
MXenes are a promising class of 2D materials, with prospects in applications such as electromagnetic interference shielding, energy storage, catalysis, and thermal management. Despite the importance of understanding their thermal transport properties, it is not clear whether electrons or phonons dominate heat transport, and the experimentally obtained in-plane thermal conductivities vary substantially. Here, we address this by studying in-plane heat transport in single Ti3C2Tx MXene flakes using spatiotemporal microscopy, directly visualizing heat transport in space and time. We obtain a thermal diffusivity of 0.05 cm2 s-1, corresponding to an in-plane thermal conductivity of 13-16 W m-1 K-1. Using an upper limit for the electronic conductivity based on terahertz measurements, we find that electrons carry at most half of the heat. This shows that─despite their metallic nature─phonons play an important role in the heat transport of Ti3C2Tx MXene, providing an unconventional combination of heat and charge transport properties., The authors thank Changhoon Park for discussions. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. K.-J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 101125457 (ERC CoG “EQUATE”) and Spanish MCIN/AEI project (PID2022-142730NB-I00 “HYDROPTO”). M.M.R. acknowledges the European Union ERC CoG THERMO2DEAL 101123381, the national project MXENE2DEVICES (PID2023-149764OA-I00), and the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. S.I. and Y.G. acknowledge the Army Research Laboratory for supporting this work under Cooperative Agreements no. W911NF-19-2-0119 and W911NF-24-2-0100., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001445-S), Peer reviewed