Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced biaxial compressive strain tuning of 2D semiconductors via hot dry transfer on polymer substrates

  • Cortés-Flores, Álvaro
  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Gosálbez-Martínez, Daniel
  • Li, Hao
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
Strain engineering is an effective tool for tailoring the properties of two-dimensional (2D) materials, of particular interest for tuning quantum phenomena. Among the limited methods available for strain engineering under cryogenic conditions, thermal mismatch with polymeric substrates provides a simple and affordable strategy to induce biaxial compressive strain upon cooling. In this work, we demonstrate the transfer of unprecedentedly large levels of uniform biaxial compressive strain to single-layer WS2 by employing a pre-straining approach prior to cryogenic cooling. Using a hot-dry-transfer method, single-layer WS2 samples were deposited onto thermally expanded polymeric substrates at 100 °C. As the substrate cools to room temperature (RT), it contracts ∼0.5%, inducing biaxial compressive strain in the WS2 layer. This pre-strain results in a measurable blueshift in excitonic energies compared to samples transferred at RT, which serve as not pre-strained controls. Subsequent cooling of the pre-strained samples from RT down to 5 K leads to a remarkable total blueshift of ∼200 meV in the exciton energies of single-layer WS2. This energy shift surpasses previously reported values, indicating superior levels of biaxial compressive strain induced by the accumulated substrate contraction (∼1.7%). Moreover, our findings reveal a pronounced temperature dependence in strain transfer efficiency, with gauge factors approaching theoretical limits for ideal strain transfer at 5 K. This enhanced efficiency, attributed to the increase of the Young’s modulus of the polymeric substrate with decreasing temperature, is particularly relevant for strain engineering of 2D materials at low temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulation of the Superconducting Phase Transition in Multilayer 2H-NbSe2 Induced by Uniform Biaxial Compressive Strain

  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Li, Hao
  • Elvira, Daniel
  • Calvo, M. Reyes
  • Castellanos-Gomez, Andres
Strain is a powerful tool for tuning the properties of two-dimensional materials. Here, we investigated the effects of large, uniform biaxial compressive strain on the superconducting phase transition of multilayered 2H-NbSe2 flakes. We observed a consistent decrease in the critical temperature of NbSe2 flakes induced by the large thermal compression of a polymeric substrate (>1.2%) at cryogenic temperatures. For thin flakes (∼10 nm thick), a strong modulation of the critical temperature up to 1.5 K is observed, which monotonically decreases with increasing flake thickness. The effects of biaxial compressive strain remain significant even for relatively thick samples up to 80 nm thick, indicating efficient transfer of strain not only from the substrate to the flakes but also across several van der Waals layers. This work demonstrates that compressive strain induced from substrate thermal deformation can effectively tune phase transitions at low temperatures in 2D materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Thickness Determination and Control in Protein-Based Biomaterial Thin Films

  • Almonte, Lisa
  • Fernandez, Maxence
  • Cortés-Ossa, Juan David
  • Blesio, Paolo
  • Juan-Bordera, Lucía
  • Sabater, Carlos
  • Cortajarena, Aitziber L.
  • Calvo, M. Reyes
  • Sabater, Carlos|||/items/dde13588-5758-450f-b6c3-494d08459c4d
Controlling the thickness and uniformity of biomaterial films is crucial for their application in various fields including sensing and bioelectronics. In this work, we investigated film assemblies of an engineered repeat protein─specifically, the consensus tetratricopeptide repeat (CTPR) protein ─a system with unique robustness and tunability. We propose the use of microreflectance spectroscopy and apparent color inspection for the quick assessment of the thickness and uniformity of protein-based biomaterial films deposited on oxidized silicon substrates. Initially, we characterized the thickness of large, uniform, spin-coated protein films and compared the values obtained from microreflectance spectroscopy with those obtained from other typical methods, such as ellipsometry and atomic force microscopy. The excellent agreement between the results obtained from the different techniques validates the effectiveness of microreflectance as a fast, noninvasive, and affordable technique for determining the thickness of biomaterial films. Subsequently, we applied microreflectance spectroscopy to determine the thickness of drop-casted CTPR-based films prepared from small protein solution volumes, which present a smaller surface area and are less uniform compared to spin-coated samples. Additionally, we demonstrate the utility of apparent color inspection as a tool for assessing film uniformity. Finally, based on these results, we provide a calibration of film thickness as a function of the protein length and concentration for both spin-coated and drop-casted films, serving as a guide for the preparation of CTPR films with a specific thickness. Our results demonstrate the remarkable reproducibility of the CTPR film assembly, enabling the simple preparation of biomaterial films with precise thickness.