Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Synthesis and Characterisation of TiO2/ZnO2 hybrid nanostructures formed by electrodeposition with different Zn(NO3)2 concentrations and used in photoelectrochemical applications [Dataset], Influence of Zn(NO3)2 concentration during the ZnO electrodeposition on TiO2 nanosponges used in photoelectrochemical applications

  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Navarro-Gázquez, Pedro José
  • Solsona-Espriu, Benjamín
  • Fernández-Domene, Ramón Manuel
  • Sánchez Tovar, Rita
The dataset contains the data that have been obtained during the synthesis and the characterization (structural, compositional, and electrochemical) of TiO2/ZnO2 hybrid nanostructures used in photoelectrochemical applications. TiO2/ZnO hybrid nanostructures were synthetized by electrochemical anodization of titanium to form TiO2 nanosponges with crystalline structure and subsequently ZnO electrodeposition. Different Zn(NO3)2 concentrations were used for electrodeposition (10–60 mM). A structural and compositional characterisation was performed using X-Ray Diffraction (XRD). Electrochemical characterisation of nanostructures was performed by Photoelectrochemical Water Splitting (PWS), stability to photocorrosion, Electrochemical Impedance Spectroscopy (EIS), and Mott-Schottky tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

UX-comments: Evaluation of User eXperience in E-learning [Dataset]

  • Sanchis Font, Rosario
  • González Barba, José Ángel
  • Pla Santamaría, Ferran
  • Castro-Bleda, Maria Jose|||0000-0003-1001-8258
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
Virtual learning environments are growing in importance as fast as e-learning, which is becoming highly demanded by universities and students worldwide. We have investigated how to automatically evaluate User eXperience in this domain using sentiment analysis techniques. For this purpose, the UX-comments corpus has been built with the opinions of 583 users (107 English speakers and 476 Spanish speakers) about three learning management systems in different courses. All the collected opinions were manually labeled with polarity information (P=positive, N=negative, or NEU=neutral) by three human annotators, both at the whole opinion and sentence levels. Dataset Information P NEU N Total Spanish Observations 338 53 85 476 Spanish Sentences 404 41 142 587 English Observations 56 21 30 107 English Sentences 90 14 80 184, Special thanks to the following biomedical organizations: Fundación IVI and Medigene Press S.L.; both have provided data from their Master and Posgraduate Courses through the academic stay research of Rosario Sanchis-Font, during 2017 and 2018. Many thanks to Carlos Turró-Ribalta and Ignacio Despujol-Zabala for supporting this research with data from UPV MOOCs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

OVS-SCM Modulation (raw data)

  • Pérez Pascual, Mª Asunción|||0000-0002-6925-6878
This dataset contains the raw data of the measurements presented in the paper: "A Computational Efficient Nyquist Shaping Approach for Short-Reach Optical Communications" (https://doi.org/10.1109/JLT.2019.2961506). - Medidas_BER_EVM.xls: contains BER and EVM measurements made for different types of modulations for both the HC-SCM modulator and the OVS-SCM, varying the following parameters: oversampling factor, transmitter filter span, rolloff factor, receiver filter span, receiver equalizer order, pre-emphasis filter (in transmission) - Medidas_Potencia.xls: contains BER and EVM values varying the received power for HC-SCM and OVS-SCM modulations; for all QAM modulations under study.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Proposal for an indicator of interactivity for the top YouTuber content in Spanish, Research material

  • Tur-Viñes, Victoria
  • González-Río, María-José
  • González-Río, María-José|||/items/f5703e1f-0891-45b0-8476-79b731646100
  • Tur-Viñes, Victoria|||/items/bf844414-3ea4-4124-8aa5-47487acd2a53
Data base of the article titled Is YouTube being used to its full potential? Proposal for an indicator of interactivity for the top YouTuber content in Spanish
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

The food sector in YouTube content aimed at children: obesogenic features, El sector alimentación en contenidos de YouTube dirigidos a la audiencia infantil: rasgos obesogénicos

  • Castello-Martinez, Araceli
  • Tur-Viñes, Victoria
  • Castello-Martinez, Araceli|||/items/3c876f7f-aa32-41bc-8bc8-2aebe89651fa
  • Tur-Viñes, Victoria|||/items/bf844414-3ea4-4124-8aa5-47487acd2a53
We analyze and compare the advertising by food brands on regular TV networks (traditional advertising) with videos by child YouTubers (influencing) in Spanish. An exploratory study is conducted by means of a content analysis of 304 videos, with 22 variables grouped into 4 categories: obesogenic features, innovative trends, prevalence of ultra-processed vs. healthy products in advertising, and marketing style.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Egyptian Vulture CR data

  • Badia-Boher, Jaume Adrià
  • Sanz-Aguilar, Ana
  • Riva, Manuel de la
  • Gangoso, Laura
  • van Overveld, Thijs
  • García-Alfonso, Marina
  • Donázar, José A.
This dataset was used to analyze survival probabilities of Egyptian Vultures at Canary Islands from 1998 to 2017., We acknowledge financial support through the projects REN 2000–1556 GLO, CGL2004-00270/BOS, CGL2009-12753-C02-02, CGL2012-40013-C02-01, and CGL2015-66966-C2-1-2-R (Spanish Ministry of Economy and Competitiveness and EU/FEDER)., The data file contains capture, resight and recovery histories of Egyptian vultures at Canary Islands (Fuerteventura and Lanzarote) during breeding seasons 1998 to 2017. This file contains one line per individual; one column per encounter occasion (from column 1 to 20 were code “0” indicate that the individual was not observed in a particular year; code “1” is used for individuals detected (marked at capture or resighted) with both coloured and steel metal butt-end rings; code “2” is used for individuals detected (marked at capture or resighted) with coloured and steel metal lock-on rings; code “3” is used for individuals resighted only retaining their coloured rings, code “4” is used for individuals resighted only retaining steel metal butt-end rings; and code “5” is used for individuals recovered freshly dead. There are six further columns (21 to 26) indicating the group (starting age at marking form 1-year-old to ≥6 year-old) for each individual., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Search for the Production of a Long-Lived Neutral Particle Decaying within the ATLAS Hadronic Calorimeter in Association with a Z Boson from pp Collisions at s =13 TeV

  • Álvarez Piqueras, D.
  • Aparisi Pozo, J.A.
  • Bailey, A.J.
  • Barranco, Laura
  • Cabrera, Susana
  • Castillo, F.L.
  • Castillo Gimenez, M. V.
  • Cerda Alberich, L.
  • Costa, María José
  • Escobar, Carlos
  • Estrada, Oscar
  • Ferrer, Antonio
  • Fiorini, L.
  • Fullana, Esteban
  • Fuster, Juan
  • García García, Carmen
  • García Navarro, José Enrique
  • González de la Hoz, Santiago
  • Higón, Emilio
  • Jimenez Pena, Javier
  • Lacasta Llácer, Carlos
  • Lozano Bahilo, José J.
  • Madaffari, Daniele
  • Mamuzic, Judita
  • Martí García, Salvador
  • Melini, Davide
  • Miñano Moya, M.
  • Mitsou, Vasiliki A.
  • Rodriguez Bosca, S.
  • Rodriguez Rodriguez, D.
  • Ruiz Martínez, Arantxa
  • Salt, José
  • Santra, A.
  • Sánchez Martínez, Javier
  • Soldevila, Urmila
  • Valero, Alberto
  • Valls Ferrer, Juan Antonio
  • Vos, Marcel
  • ATLAS Collaboration
This Letter presents a search for the production of a long-lived neutral particle (Zd) decaying within the ATLAS hadronic calorimeter, in association with a standard model (SM) Z boson produced via an intermediate scalar boson, where Z→+ (=e, μ). The data used were collected by the ATLAS detector during 2015 and 2016 pp collisions with a center-of-mass energy of s=13 TeV at the Large Hadron Collider and correspond to an integrated luminosity of 36.1±0.8 fb-1. No significant excess of events is observed above the expected background. Limits on the production cross section of the scalar boson times its decay branching fraction into the long-lived neutral particle are derived as a function of the mass of the intermediate scalar boson, the mass of the long-lived neutral particle, and its cτ from a few centimeters to one hundred meters. In the case that the intermediate scalar boson is the SM Higgs boson, its decay branching fraction to a long-lived neutral particle with a cτ approximately between 0.1 and 7 m is excluded with a 95% confidence level up to 10% for mZd between 5 and 15 GeV., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Litospheric Structure of the North Iberian Margin: MARCONI-WA reflection profiles

  • Gallart Muset, Josep
  • Pulgar, J. A.
  • Muñoz, Josep A.
  • Diaz, J.
  • Ruiz Fernández, Mario
An onshore-offshore network of 24 Ocean-Bottom Seismometers or Hydrophones (12 OBS and 8 OBH) and 35 land stations deployed in 46 different sites. The OBS/OBH network remained fixed during all the experiment and covered on place all the profile intersections, with an average spacing of 30–40 km. The land seismic stations were deployed with an average spacing of 10–15 km extending the N-S profiles onshore, with some additional instruments following the shoreline. The seismic source consisted of a Bolt airgun array fired every 40 s, resulting in a shot spacing of 100 m. The shooting pressure was set constant at 140 bars., Ruiz Fernández, Mario; mruiz@geo3bcn.csic.es, MARCONI (MARgen COntinental Nord Iberico - North Iberian Continental Margin) is a deep seismic reflection survey carried out in the southeastern part of the Bay of Biscay in September 2003. It included the acquisition of 11 multichannel (http://dx.doi.org/10.20350/digitalCSIC/8972) and wide-angle deep seismic reflection profiles covering a total length of 2000 km., MARCONI (MARgen COntinental Nord Iberico - North Iberian Continental Margin) is a deep seismic reflection survey carried out in the southeastern part of the Bay of Biscay in September 2003. It included the acquisition of 11 multichannel (http://dx.doi.org/10.20350/digitalCSIC/8972) and wide-angle deep seismic reflection profiles covering a total length of 2000 km, Ministerio de Ciencia y Tecnología, REN2001-1734, MARCONI; CDS2006-0041, Consolider-Ingenio 2010 Programme Topo-Iberia; Ministerio de Ciencia e Innovación, CGL2008-03474-E/BTE, TopoMed; Ministerio de Economía y Competitividad, CGL2013-48601-C2-2-R, MISTERIOS, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Numerical_Model_WM_Peral_et_al_2022

  • Peral, M.
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Zlotnik, Sergio
  • Jimenez-Munt, Ivone
The geodynamic evolution of the Western Mediterranean related to the closure of the Ligurian-Tethys ocean is not yet fully resolved. We present a new 3D numerical model of double subduction with opposite polarities fostered by the inherited segmentation of the Ligurian-Tethys margins and rifting system between Iberia and NW Africa. The model is constrained by plate kinematic reconstructions and assumes that both Alboran-Tethys and Algerian-Tethys plate segments are separated by a NW-SE transform zone enabling that subduction polarity changes from SE-dipping in the Alboran-Tethys segment to NW-dipping in the Algerian-Tethys segment. The model starts about late Eocene times at 36.5 Ma and the temporal evolution of the simulation is tied to the geological evolution by comparing the rates of convergence and trench retreat, and the onset and end of opening in the Alboran Basin. Curvature of the Alboran- Tethys slab is imposed by the pinning of its western edge when reaching the end of the transform zone in the adjacent west-Africa continental block. The progressive curvature of the trench explains the observed regional stress reorientation changing from N-S to NW-SE and to E-W in the central and western regions of the Alboran Basin. The increase of the retreat rates from the Alboran- Tethys to the Algerian-Tethys slabs is compatible with the west-to-east transition from continental-to-magmatic-to-oceanic crustal nature and with the massive and partially synchronous calc-alkaline and alkaline magmatism. Alkaline magmatism is related to the induced sublithospheric mantle flow by the double subduction system depicting a NE-SW upwelling trend., This work is funded by the SUBTETIS (PIE-CSIC-201830E039, CSIC), ALORBE (PIE- CSIC-202030E310), GeoCAM (PGC2018-095154-B-I00, Spanish Government), Equinor R&T Fornebu (Norway), and the Generalitat de Catalunya grant (AGAUR 2017 SGR 847). We also thank the computer resources at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (BSC) through several projects (AECT-2019-1-0013 and AECT-2019-2-0005). S. Z. has been funded by the Spanish Ministry through Grant DPI2017-85139-C2-2-R, by the Catalan Government through Grant 2017-SGR-1278, and by the EU's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement 777778. This work has been done in the framework of the Unidad Asociada of LACAN-UPC with CSIC and using the facilities of the Laboratory of Geodynamic Modeling from Geo3BCN-CSIC., Numerical experiments are named M1 and M2. M1: Alboran-Algerian system; M2: Alboran system, according to Figure S2 in Peral et al., 2022. Increasing numbers indicate different timesteps of each experiment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Seagrass thermal limits

  • Marbà, Núria
  • Jordá, Gabriel
  • Bennett, Scott
  • Duarte, Carlos M.
The dataset compiles seagrass upper thermal limits (Tlimit) for survival, growth or biomass loss published in the literature and obtained by conducting a search on Web of Knowledge using the keywords combinations seagrass AND (temperature OR warming) and seagrass AND ("thermal limit" OR "thermal threshold" OR "critical temperature" OR "thermal niche”). The reference lists of the papers obtained with these searches were screened for additional relevant data. The dataset only includes data of seagrass populations growing submersed within their native geographical range. Tlimit are derived from empirical observations of seagrass die-off events attributed to heat waves, in combination with other simultaneous stressors (hypersalinity, Carlson et al 2018; low light availability, Moore and Jarvis 2008, Moore et al., 2014), or mesocosm experiments. Seagrasses in mesocosm experiments were exposed to at least 2 temperature treatments above average in situ summer temperature that extended the experimental thermal range beyond the Tlimit. Seagrasses were exposed to experimental temperatures for 6 to 120 days depending on the study. The Tlimit was defined as: a) the upper temperature at which shoot survival, shoot growth or biomass above optimal temperature started to decline in experimental studies; or b) the seawater temperature during the heat wave that triggered die-off events. For each study, the compiled dataset includes the species name, location and coordinates of the population studied, the Tlimit, the approach (i.e. experimental or empirical), the year the study was conducted and the data source. For experimental studies, the dataset also includes the temperature treatments seagrasses were exposed to. For each population studied, we obtained mean annual seawater temperature values for the 5 years before the thermal tolerance experiment or observation was conducted from the ORAS4 ocean reanalysis (Balmaseda, Mogensen, Weaver, 2013), which provides monthly 3D temperature global fields from 1958 to present with a spatial resolution of 1 degree in the horizontal and ~10 m in the vertical. Those temperatures aim at representing the regional characteristics, rather than the local features which cannot be captured by the coarse spatial resolution, [Relationship between files] The file "variables_Marbà_et_al_ 2022.xlsx" defines the variables used in the dataset. The full references of the sources of data compiled in the dataset are provided in the file "References_Dataset_Marba_et_al_2022.docs"., [Environmental/experimental conditions] The dataset includes target experimental temperatures and average annual seawater temperature natural populations were exposed to, calculated for the 5 years before conducting the experiment or the occurrence of seagrass mass-mortality event., Dataset of seagrass upper thermal limits for survival, growth or biomass loss derived from empirical observations of seagrass die-off events attributed to heat waves or mesocosm experiments., This work was funded by the Spanish Ministry of Economy, Industry and Competivness with the projects MedShift (CGL2015-71809-P), SumaEco (RTI2018-095441-B-C21) and Clifish (CTM2015-66400-C3-2-R), the European Union’s Horizon 2020 SOCLIMPACT project (grant agreement No 776661) and the King Abdullah University of Science and Technology (KAUST subaward number 3834). S.B. was supported by a Juan de la Cierva Formación contract funded by the Spanish Ministry of Economy, Industry and Competitiveness., File List: - variables_Marbà_et_al_ 2022.xlsx - dataset_Marbà_et_al_2022_(seagrass thermal limits).xlsx - References_Dataset_Marba_et_al_2022.docs, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Datasets and Supporting Materials for the IPIN 2020 Competition Track 3 (Smartphone-based, off-site)

  • Torres-Sospedra, Joaquín
  • Quezada Gaibor, Darwin
  • Jiménez Ruiz, Antonio R.
  • Pérez-Navarro, Antoni
  • Seco Granja, Fernando
This package contains the datasets and supplementary materials used in the IPIN 2020 Competition. Contents: IPIN2020_Track03_TechnicalAnnex_V1-01.pdf: Technical annex describing the competition 01-Logfiles: This folder contains a subfolder with the 78 training logfiles, 72 of them single floor, 4 in bookshelves areas and 2 of them in floor-transition zones, a subfolder with the 13 validation logfiles, and a subfolder with the 1 blind evaluation logfile as provided to competitors. 02-Supplementary_Materials: This folder contains the matlab/octave parser, the raster maps, the files for the matlab tools and the trajectory visualization. 03-Evaluation: This folder contains the scripts used to calculate the competition metric, the 75th percentile on the 82 evaluation points. It requires the Matlab Mapping Toolbox. The ground truth is also provided as a CSV file. Since the results must be provided with a 2Hz freq. starting from apptimestamp 0, the GT includes the closest timestamp matching the timing provided by competitors. It contains a sample of reported estimations and the corresponding results. Additionally, we provide a second script to provide a more detailed report on the results file (requires export_fig folder to run)., Parts of this work were carried out with the financial support received from projects and grants: - A-WEAR (H2020-MSCA-ITN-2018, Grant Agreement 813278) - INSIGNIA (PTQ2018-009981) - REPNIN+ network (TEC2017-90808-REDT) - LORIS (TIN2012-38080-C04-04) - SmartLoc(CSIC-PIE Ref.201450E011) - TARSIUS (TIN2015-71564-C4-2-R, MINECO/FEDER) - MICROCEBUS (MICINN, ref. RTI2018-095168-B-C55, MCIU/AEI/FEDER UE) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Datasets and Supporting Materials for the IPIN 2021 Competition Track 3 (Smartphone-based, off-site)

  • Torres-Sospedra, Joaquín
  • Aranda Polo, Fernando J.
  • Parralejo, Felipe
  • Bellavista Parent, Vladimir
  • Álvarez, Fernando J.
  • Pérez-Navarro, Antoni
  • Jiménez Ruiz, Antonio R.
  • Seco Granja, Fernando
This package contains the datasets and supplementary materials used in the IPIN 2021 Competition. Contents: IPIN2021_Track03_TechnicalAnnex_V1-02.pdf: Technical annex describing the competition 01-Logfiles: This folder contains a subfolder with the 105 training logfiles, 80 of them single floor indoors, 10 in outdoor areas, 10 of them in the indoor auditorium with floor-trasitio and 5 of them in floor-transition zones, a subfolder with the 20 validation logfiles, and a subfolder with the 3 blind evaluation logfile as provided to competitors. 02-Supplementary_Materials: This folder contains the matlab/octave parser, the raster maps, the files for the matlab tools and the trajectory visualization. 03-Evaluation: This folder contains the scripts used to calculate the competition metric, the 75th percentile on the 82 evaluation points. It requires the Matlab Mapping Toolbox. The ground truth is also provided as 3 csv files. Since the results must be provided with a 2Hz freq. starting from apptimestamp 0, the GT files include the closest timestamp matching the timing provided by competitors for the 3 evaluation logfiles. It contains samples of reported estimations and the corresponding results., We would like to thank GISS Research team at University of Extremadura for their support in colllecting the datasets and the ISTI-CNR for managing the competition and find sponsors for the winner's award. We are also grateful to Francesco Potortì, Sangjoon Park and the ISTI-CNR team for their invaluable committment in organizing and promoting the IPIN competition and conference. This work has been done within the framework of the IPIN 2021 Conference in Lloret de Mar, organised by A. Pérez-Navarro, R. Montoliu and J. Torres-Sospedra. Parts of this work were carried out with the financial support received from projects and grants: - A-WEAR (H2020-MSCA-ITN-2018, Grant Agreement 813278) - INSIGNIA (PTQ2018-009981) - REPNIN+ network (TEC2017-90808-REDT) - LORIS (TIN2012-38080-C04-04) - SmartLoc(CSIC-PIE Ref.201450E011) - TARSIUS (TIN2015-71564-C4-2-R, MINECO/FEDER) - MICROCEBUS (MICINN, ref. RTI2018-095168-B-C55, MCIU/AEI/FEDER UE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data on the effect of resource availability and herbivory on the defence-growth-reproduction trade-off of a masting Mediterranean pine

  • Larrinaga, Asier R.
  • Sampedro Pérez, Luis
  • Zas Arregui, Rafael
[General methods] The full collection of six csv files contains all the raw data used in the paper “Resource availability and herbivory alter defence-growth-reproduction trade-offs in a masting Mediterranean pine”, which is now in its pre-print version. In this article we report the results of two parallel experiments we carried out to independently asses the effect of nutrient availability and different defence induction treatments on the three-way trade-off. Thirty six ramets were allocated to the fertilization experiment, with 12 ramets of each of three genotypes being randomly assigned to one of three blocks and one of two treatments (fertilization and control). Within each block, ramets were spatially grouped in two treatment plots. Each treatment by genotype combination comprises six ramets, two per block. The remaining 45 ramets were included in the defence induction experiment and randomly assigned to one of three blocks and one of five induction treatments. Within each block, ramets were spatially grouped in five treatment plots. Each treatment by genotype combination had three ramets, one per block. In the fertilization experiment we had only two treatments (fertilized vs control). Fertilization was accomplished by applying Fertimon Rojo (Soaga S.L. 2-10-16 NPK + 2.8% Mg) and a liquid 100-20-70 NPK fertilizer applied to the substrate at the base of the trunk of each tree (see Sampedro et al. 2011 for details on this fertilizer solution). The foliar fertilization continued until the end of the experiment. In january 2010, 125 additional grams of Osmocote (KB®, Scotts, NPK 17-09-11 + 2% MgO) were also added to each tree. Fertilization was maintained throughout the whole monitoring period (2010-2015). Five treatments were assigned to the herbivory simulation experiment (applied during the first two years, 2010-2011): • Needle clipping (repeated cutting of needles tips, around 1-2 cm). • Methyl jasmonate application (brushing a 25 mM solution on debarked areas of the trunk; see details in Vázquez-González et al. 2021). • Low intensity mechanical wounding of the trunk involved making three 5 mm circular holes in the bark and phloem. • High intensity mechanical wounding of the trunk, throug six 5 mm circular hole in the bark and phloem Ramets were monitored from 2010 to 2015. Below, we provide specific details on the methods associated to its data-set and the variables it includes., [growth.csv] Ramet growth was monitored for six years, beginning in 2010. Growth monitoring involved measuring maximum tree height and stem diameter at one meter height and two orthogonal directions. Tree height was measured to the nearest dm using a telescopic measuring rod, while tree callipers were used to measure stem diameter to the nearest cm., [nutrients.csv] Nutrient content was only assessed for the fertilization experiment and for the needles produced in 2010. Needle samples were taken in 14 October 2010. Nitrogen concentration in needles was determined in a LECO elemental analyzer (model CHN 628) while phosphorus was analyzed by inductively coupled plasma optical emission spectroscopy (ICP-OES) using a Perkin-Elmer Optima 4300DV (Massachusetts, USA) at the central laboratory facilities of Universidade de Vigo – CACTI (www.uvigo.es/webs/cactiweb/). Nitrogen and P concentration were expressed in mg g-1 tissue on a dry weight basis., [phenols.csv] See “resin.csv” below, for details on the sampling protocol for defensive compounds estimation. Polyphenolics were extracted from a subsample of 30 mg of needles or phloem, by immersion in a metanol-water solution (1:1 volume) in an ultrasonic bath of 15 min, followed by centrifugation and extract dilution. Colorimetric measurements were taken with a Biorad 650 microplate reader (Bio-Rad Laboratories, Philadelphia, PA,USA) a 740 nm., [pissodes.csv] During the summer of 2011 both experiments suffered an outbreak of Pissodes castaneus. We assessed the abundance of the damage caused by this curculionid in each ramet on 16 September 2011, by visually inspecting the scars produced in the main stem and assigning them to a four category ordinal scale (none, rare, abundant and very abundant)., [reproduction.csv] Monitoring of ramet reproduction comprised measures of reproductive effort (number of female strobili and abundance of male strobili) from 2010 to 2013, and measures of reproductive output (number of ripe cones, total number of seeds produced and number and dry weight of healthy seeds) from 2012 to 2015. Strobili cohorts blooming in 2010 to 2013 were hence monitored to ripeness (in 2012 to 2015). All female flowering strobili were visually counted and ripe cones collected, while male strobili shoots were counted and their length visually estimated to the nearest 5 mm to get an estimate of male strobili abundance. Pine cones where air-dried for several weeks and then oven-dried for seven days to induce opening (35ºC). Empty and healthy seeds were discriminated by decanting them on cold water, where empty seeds remain floating on the surface. After separating healthy and empty seeds for each cone, they were oven-dried again at 35ºC before weighing them to the nearest 1 mg with a precision scale., [resin.csv] On 14 October 2010 we collected needle samples from both experiments, to assess defensive compound (non-volatile resin and total polyphenolics) and nutrient content (nitrogen and phosphorus concentration). Both needles produced in 2009 and 2010 were collected (and analysed) separately in each ramet. Nutrient content was only assessed for the fertilization experiment and for the needles produced in 2010. Defensive compounds were also determined in phloem samples collected from all ramets on 16 april 2011 but due to logistical reasons, resin content data for phloem samples in 2010 were lost. Needle and phloem sampling was hence repeated at the end of the experiment, in 2013, in order to estimate non-volatile resin concentration. Total non-volatile resin content in phloem and needle tissue was determined by gravimetric analysis. Needle and phloem fresh samples (aprox 2-5 g) were immediately covered with hexane within pre-weighed test tubes, and sonicated for 20 min at 20ºC. Resin extraction continued for 24 h at room temperature under the fume hood and then the content of the tube was filtered with GFF filters (Whatman GF⁄ D, Whatman Int. Ltd, Maidstone, Kent, UK) into a second pre-weighed tube. The whole extraction procedure was repeated with each sample and the liquid fraction from both extractions pooled before letting them dry under the fume hood. Completely dried tubes were weighed with a precision scale to the nearest 0.0001 g. The solid fraction was oven-dried at 65ºC until constant weight. Total non-volatile resin content was estimated as mg of dried extracted resin per g of dry sample. Needle and phloem samples were analysed to estimate phenol content by the Folin-Ciocalteu method (Scalbert 1992), a colorimetric protocol using the Folin-Ciocalteu reagent and tannic acid as standard. Fresh samples were immediately oven-dried at 45ºC and manually ground in a mortar with liquid nitrogen., Pairwise trade-offs among the main dimensions of life history of plants, namely growth, reproduction and defence, have repeatedly tested with inconclusive results. Relationships between life history dimensions mediate the evolution of reproductive strategies, such as masting, as they are key to understand resource allocation, predator satiation and the response of plants to resource and climate variation. We carried out two long-term field experiments with 81 clonally replicated individuals from 6 genotypes to assess their response to increased resource availability (fertilization and control treatments) and simulated herbivory (low intensity mechanical wounding, high intensity mechanical wounding, needle clipping, jasmonate application and control treatments). The data set comprises 6 csv files containing between 6 and 19 variables each, with data on tree (ramet) growth (DBH), reproductive effort and performance (female and male strobili production, number of ripe cones, number of healthy seeds, total number of seeds and mean dry weight of seeds), nutrient content (P, C, N and C/N), production of defensive compounds (total resin and total phenolics) and realized herbivory damage (damage level produced by Pissodes castaneus) during six years (four reproductive cohorts)., This data were collected with the support of the Spanish Goverment (grant numbers AGL2012-40151-C03-01, AGL2015-68274-C3-2-R)., growth.csv, nutrients.csv, phenols.csv, pissode.csv, reproduction.csv, resin.csv, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MOPREDAScentury: a long-term monthly precipitation grid for the Spanish mainland

  • Beguería, Santiago
  • Peña-Angulo, Dhais
  • Trullenque Blanco, Víctor
  • González-Hidalgo, José Carlos
29 Pags.-, 24 Figs.- 15 Tabls. © Author(s) 2023. This work is distributed under the Creative Commons Attribution 4.0 License., This article describes the development of a monthly precipitation dataset for the Spanish mainland, covering the period between December 1915 and December 2020. The dataset combines ground observational data from the National Climate Data Bank (NCDB) of the Spanish meteorological service (AEMET) and new data rescued from meteorological yearbooks published prior to 1951 that were never incorporated into the NCDB. The yearbooks’ data represented a significant improvement of the dataset, as it almost doubled the number of weather stations available during the first decades of the 20th century, the period when the data were more scarce. The final dataset contains records from 11 312 stations, although the number of stations with data in a given month varies largely between 674 in 1939 and a maximum of 5234 in 1975. Spatial interpolation was used on the resulting dataset to create monthly precipitation grids. The process involved a two-stage process: estimation of the probability of zero precipitation (dry month) and estimation of precipitation magnitude. Interpolation was carried out using universal kriging, using anomalies (ratios with respect to the 1961–2000 monthly climatology) as dependent variables and several geographic variates as independent variables. Cross-validation results showed that the resulting grids are spatially and temporally unbiased, although the mean error and the variance deflation effect are highest during the first decades of the 20th century, when the observational data were more scarce. The dataset is available at https://doi.org/10.20350/digitalCSIC/15136 under an open license and can be cited as Beguería et al. (2023)., . This research has been supported by research grants PID2020-116860RB-C22, CGL2017-83866-C1-3-R, and CGL2017-83866-C3-3-R by the Spanish Ministry of Science and Innovation and by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC’s Interdisciplinary Thematic Platform Clima (PTI Clima)/Development of Operational Climate Services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for Dimensionality-driven metal-insulator transition in spin-orbit-coupled IrO2

  • Laguna-Marco, M. A.
  • Arias-Egido, Eduardo
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Boada, Roberto
  • Proyecto: PID2020-115159GB-I00
All the experiments have been carried out on thin films of IrO2, the thickness and crystallinity of the each film being specified in each file. X-ray reflectivity (XRR) and X-ray diffraction measurements (XRD) were performed by using Bruker D8 and Rigaku D/max-2500 diffractometers, respectively, by using the Ka radiation line of copper. The electrical resistivity was measured using the four points van der Pauw method by means of a Quantum Design PPMS-9T with no applied magnetic field and with a small electric current (0.1 mA). Magnetization measurements were carried out by using a commercial SQUID magnetometer from Quantum Design. Magnetization versus temperature data were collected from 5 to 350 K with a heating rate of 5 K/min at 1000 Oe. High-energy resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XANES) measurements were carried out at RT by using a beamline I20-Scanning at Diamond Light Source. More informacion can be found in https://doi.org/10.1107/S1600577518008974. X-ray magnetic circular dichroism (XMCD) measurements were carried out at beamline 4-ID-D of the Advanced Photon Source, Argonne National Laboratory. Measurements were done in a cryomagnet with the sample cooled with 4He vapor. A 500 micron thick diamond phase plate was used to generate circularly polarized X-rays and XMCD measurements were carried out in helicity-switching mode. Measurements were done in fluorescence mode using a grazing incidence geometry and an energy dispersive 4-element Si drift diode detector placed at 90 degrees relative to the incident beam direction. XMCD Data were collected at 10 K with the magnetic fields along and opposite the X-ray propagation direction to remove any artifacts of nonmagnetic origin., Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER,UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE); Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033; Aragon Regional Government (Projects No. E12-20R and E28-20R); European Union’s Horizon 2020 program Marie Sklodowska-Curie grant agreement no. 665919; European Union’s Horizon 2020 Programme project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473)., XRD_IrO2_001epitaxy.dat XRD_IrO2_100epitaxy.dat XRD_IrO2_110epitaxy.dat XRD_IrO2_110textured.dat AFM_2d2nm_thick_001epitaxy.tif STEM_5d7_nm_thick_001epitaxy.tif XAS_IrO2_001epitaxy_5d7nm.dat XAS_IrO2_001epitaxy_96nm.dat XAS_IrO2_100epitaxy_1d7nm.dat XAS_IrO2_100epitaxy_5d1nm.dat XAS_IrO2_100epitaxy_89nm.dat XAS_IrO2_110epitaxy_5d3nm.dat XAS_IrO2_110epitaxy_92d2nm.dat XAS_IrO2_polycrystalline_films resistivity_IrO2_ 001epitaxy.dat resistivity_IrO2_ 100epitaxy.dat resistivity_IrO2_ 110epitaxy.dat resistivity_IrO2_ 110texture.dat MvsT_IrO2_001epitaxy_1d5nmthick.dat MvsT_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_powderIrO2.dat XRR_IrO2_5nmthick.dat XRR_IrO2_100nmthick.dat XAS_polycrystalline_vs_amorphous.dat rockingcurves_IrO2.dat RSM_IrO2_001epitaxy_5d7nm.dat RSM_IrO2_001epitaxy_96nm.dat RSM_IrO2_100epitaxy_5d1nm.dat RSM_IrO2_100epitaxy_89nm.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Variable relationships between trait diversity and avian ecological functions in agroecosystems [Dataset]

  • Peña García, Rocío
  • Schleuning, Matthias
  • Miñarro, Marcos
  • García, Daniel
dataset: SeedDispersal_data_Pastures.csv: It contains data of the resource and forest cover availability, FDis and MPD standardized values for each frugivorous local assemblage, frugivorous bird abundances, and the dispersed seeds by birds, in different sampling plots in woodland pastures. Below we describe the contents of each column: plot_code: code for plot identity. year: sampling year. id_station: code for seed-trap identity. disp_seeds_m2: dispersed seeds/m2 Forest_cover: forest cover availability in each plot. Fruit_abundance: resource availability in each plot. FDis: Trait-based functional diversity estimated as the standardized Functional Dispersion in each local assemblage. Frug_abundance: abundance of all present frugivorous birds per plot. MPD: Phylogenetic Diversity estimated as the standardized Mean Pairwise Distance in each local assemblage., dataset: Insectivory_data_Pastures.csv: It contains data of the resource and forest cover availability, FDis and MPD standardized values for each insectivorous local assemblage, insectivorous bird abundances, and the dispersed seeds by frugivorous birds, in different sampling plots in woodland pastures. Below we describe the contents of each column: plot_code: code for plot identity year: sampling year tree_identity: code for focal tree identity. Attacked_success: pecked caterpillar. Intact_failure: intact caterpillar. n_models: number of caterpillar models placed on each focal tree. Forest_cover: forest cover availability in each plot. arthropod_g: resource availability in each plot. FDis: Trait-based functional diversity estimated as the standardized Functional Dispersion in each local assemblage. FI_bird_abundance: abundance of all forest insectivorous birds per plot. MPD: Phylogenetic Diversity estimated as the standardized Mean Pairwise Distance in each local assemblage., dataset: Insectivory_data_Orchards.csv: It contains data of the resource and forest cover availability, FDis and MPD standardized values for each insectivorous local assemblage, insectivorous bird abundance, and the dispersed seeds by frugivorous birds, in different sampling plots in apple orchards. Below we describe the contents of each column: plot_code: code for plot identity year: sampling year tree_identity: code for focal tree identity Attacked_success: pecked caterpillar Intact_failure: intact caterpillar n_models: number of caterpillar models placed on each focal tree Forest_cover: forest cover availability in each plot. arthropod_g: resource availability in each plot. FDis: Trait-based functional diversity estimated as the standardized Functional Dispersion in each local assemblage. FI_bird_abundance: abundance of all forest insectivorous birds per plot. MPD: Phylogenetic Diversity estimated as the standardized Mean Pairwise Distance in each local assemblage., 1) The diversity of traits within animal assemblages has been shown to affect the magnitude of animal-provided ecological functions. However, little is known about how consistent trait diversity effects are across ecological functions and ecosystems. More importantly, the importance of trait diversity in driving ecosystem functioning, relative to other components of biodiversity, has rarely been assessed. It also remains unclear how environmental gradients filter trait diversity and, ultimately, modulate ecological functions. 2) Here we test how different biodiversity components (i.e., trait diversity, phylogenetic diversity and abundance) affect the magnitude of avian seed dispersal and insect predation along large environmental gradients. We sampled frugivorous and insectivorous birds and their ecological functions across gradients of forest cover and fruit and insect abundances in woodland pastures and apple orchards in Northern Spain. We measured 6 morphological traits and compiled phylogenetic information on 43 bird species. We used Structural Equation Models to disentangle the effects of environmental gradients and biodiversity components on ecological functions. 3) We found that different avian functions in the same agroecosystem were controlled by different biodiversity components. While seed dispersal was positively driven by bird abundance in woodland pastures, insect predation responded positively to trait and phylogenetic diversity. The positive effects of trait diversity on insect predation were, on the other hand, consistent across woodland pastures and apple orchards. 4) Our results also pinpointed forest cover and resource availability as filters of the different components of avian diversity, suggesting that environmental gradients condition the effects of biodiversity on avian ecological functions. 5) Our findings reveal variable effects of trait diversity on two different avian ecological functions, but consistent effects on the same function across agroecosystems. Consolidating the generalities of trait diversity effects will require further multi-function studies, as well as a unifying framework for animal-driven functions that integrates the causal links between environmental gradients, the different biodiversity components, and ecological functions., MinECo/FEDER, Award: CGL2015-68963-C2-2-R, MinECo/FEDER, Award: BES-2016-078260, Fundación BBVA, Award: 044-2019 ClaveSER, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data from: Frugivore biodiversity and complementarity in interaction networks enhance landscape-scale seed dispersal function

  • García, Daniel
  • Donoso, Isabel
  • Rodríguez-Pérez, Javier
Abundance.csv: Abundance of birds and fruits, Fruit_Consumption.csv: Fruit consumption observations events, Seed_Dispersal_Year.csv: Seed deposition by birds in different years, Seed_Dispersal_Pooled.csv: Seed deposition by birds, sampling years pooled., 1. Animal biodiversity matters for the provision of ecosystem functions derived from trophic activity. However, the mechanisms underlying this pattern remain elusive since animal abundance and diversity, which are the components commonly used for representing biodiversity, provide poor information about ecological complementarity in species assemblages. An approach based on species interaction networks may overcome this constraint. 2. Here, we relate frugivore biodiversity and frugivore-plant network structure with landscape-scale seed dispersal function. We sampled, for two years, and at fourteen plots with variable assemblages of frugivores and plants in the Cantabrian Range (N Spain), data on the abundance and diversity of frugivorous birds, the consumption of fleshy fruits of woody plants, and the landscape-scale patterns of avian seed deposition. As a measure of interaction complementarity in seed dispersal networks, we estimated the degree to which frugivore and plant species specialize in their interacting partners. 3. Specialization varied strongly across the seed dispersal networks of the different plots, being higher in networks harboring smaller bird species that dispersed mostly small-fruited plants, and also in networks with late-ripening, dominant fruiting species dispersed mostly by wintering birds. 4. Bird abundance markedly affected seed deposition. Plots harboring more birds received a higher density of dispersed seeds, and showed higher probabilities of seed arrival and seed deposition in open microhabitats. Bird diversity also had a positive effect on the density of dispersed seed and, to a lesser extent, seed arrival probability. Independently of frugivore abundance and diversity, the density of dispersed seeds increased in plots where seed dispersal networks showed a higher degree of specialization. 5. This study considers the structure of interaction networks to re-address the relationship between biodiversity and ecosystem functionality, evidencing that specialization in frugivore-plant networks drives the large-scale process of seed dispersal. These results encourage the consideration of interaction complementarity as an underlying mechanism linking animal biodiversity and trophic-related functions., Spanish MinECo/FEDER; grants CGL2011-28430 and CGL2015-68963-C2-2-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Datasets and Supporting Materials for the IPIN 2025 Competition Track 3 (Smartphone-based, off-site)

  • Torres-Sospedra, Joaquín
  • Jiménez Ruiz, Antonio R.
  • Pérez-Navarro, Antoni
  • Palumbo, Filippo
  • La Rosa, Davide
  • Potortì, Francesco
  • Klus, Lucie
  • Klus, Roman
  • Ometov, Aleksandr
  • Lohan, Elena Simona
  • Nurmi, Jari
  • Ortiz, Miguel
The Track 3 competition aims to benchmark indoor localization methods based on smartphone sensors and radio signals, such as Wi-Fi, BLE, magnetic field, inertial, pressure, light, sound, and GNSS data. The recordings were performed in a realistic multi-floor university building while participants moved naturally through various environments., This work and competition are part of the IPIN 2025 Conference in Tampere, Finland., This dataset was collected for the IPIN 2025 Indoor Positioning Competition – Track 3 ("Smartphone-based"), organized within the 15th International Conference on Indoor Positioning and Indoor Navigation (IPIN 2025) in Tampere, Finland., This package provides the complete data used in the competition — including training, testing, and scoring trials, as well as the Matlab tools, maps, and evaluation scripts supporting the generation and assessment of the results., - POSITIONATE (CIDEXG/2023/17, Conselleria d’Educació, Universitats i Ocupació, Generalitat Valenciana) - GeoLibero (from CYTED) - INDRI (MICINN, ref. PID2021-122642OB-C42, PID2021-122642OB-C43, PID2021-122642OB-C44, MCIU/AEI/FEDER UE) - MICROCEBUS (MICINN, ref. RTI2018-095168-B-C55, MCIU/AEI/FEDER UE) - TARSIUS (TIN2015-71564-C4-2-R, MINECO/FEDER) - SmartLoc (CSIC-PIE Ref.201450E011) - LORIS (TIN2012-38080-C04-04), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental dataset (2018-2022) of the effect of winter legume cover crops on irrigated monoculture maize performance in Ebro valley (Spain) [Dataset], Conjunto de datos experimental (2018-2022) sobre el efecto de cultivos cubierta de leguminosas de invierno en el rendimiento del maíz en monocultivo en regadío en el valle del Ebro (España) [Dataset]

  • Isla Climente, Ramón
  • Zugasti López, Inés
  • Cavero Campo, José
[EN] This file contains .xlsx files. Reading the data requires a Microsoft Excel software., [ES] Este archivo contiene .xlsx. Su lectura requiere utilizar el programa Microsoft Excel., This dataset is covered by a Creative Commons Licence Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)., [EN] This file contains the raw data supporting the article “Exploring Winter Legume Cover Crop Management Strategies in Irrigated Maize Monoculture Systems”, published in the journal Agronomy (doi:10.3390/agronomy16060630). The Excel file includes the different datasets obtained from a field experiment conducted between October 2018 and December 2022. The objective of the study was to evaluate the performance of different winter legume cover crops in an irrigated maize monoculture system in the Ebro Valley (Spain). The experiment assessed: (1) The effect of cover crop species (Vicia sativa, Vicia villosa, pea, and a no-cover-crop control), (2) The effect of seeding rate (standard seeding rate and a seeding rate reduced by 20%), (3) The effect of cover crop establishment method (conventional sowing after tillage and no-till sowing directly into maize residue). The dataset includes meteorological data collected during the experimental period, cover crop biomass production, biological nitrogen fixation, and soil mineral nitrogen content measured at different stages of the cropping cycle. Data on the effects of cover crops on weed growth and maize productivity are also included., [ES] Este archivo contiene los datos base del artículo ““Exploring Winter Legume Cover Crop management Strategies in Irrigated Maize Monoculture Systems”, publicado en la revista Agronomy. doi:10.3390/agronomy16060630. El archivo Excel contiene los distintos datos del experimento de campo que se llevó a cabo entre octubre 2018 y diciembre de 2022. EL objetivo del estudio fue evaluar cómo se comportan distintas cubiertas vegetales de leguminosas en un sistema de monocultivo de maíz en sistemas de regadío del Valle del Ebro. En el experimento se estudió: (1) el efecto de la especie (veza sativa, veza villosa, guisante, control sin cubierta vegetal), () el efecto de la dosis de siembra (dosis normal y dosis reducida un 20%), y (3) el efecto del tipo de siembra de la cubierta vegetal (siembra convencional tras laboreo y siembra directa sobre rastrojo de maíz. Se incluyen datos meteorológicos durante el periodo del ensayo, de producción de biomasa de las cubiertas vegetales, la fijación biológica de nitrógeno, el contenido de nitrógeno mineral en el suelo en distintos momentos del ciclo de cultivo. También se incluye el efecto de las cubiertas sobre el crecimiento de especies arvenses (malas hierbas), y sobre la productividad del maíz., AGL2017-84529-C3-12-R; AGL2017-84529-C3-2-R; PID2021-1263430B-C32 / Spanish Ministry of Economy, Industry and Competitiveness; Spanish Ministry of Science and Innovation., The data are included in the file named “ExperimentalDataset_CC-maize2018-2022.xlsx”. There is only one Microsoft Excel file dataset. The MS Excel dataset includes five subdata sets: MeteoData_Fig1, CoverCrops, BiologicalFixation, Maize performance, SoilMineralContent., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the paper “Grouping products for the optimization of production processes: A case in the steel manufacturing industry”. European Journal of Operational Research, 286(1), 190-202

  • Casado Yusta, Silvia
  • Laguna, Manuel
  • Pacheco Bonrostro, Joaquín
  • Puche Regaliza, Julio César
The optimization of a production process is often based on the efficient utilization of the production facility and equipment. In particular, reducing the time to change from producing one product to another is critical to the fulfillment of demand at a minimum cost. We study the production of steel coils in the context of searching for groups of products with similar characteristics in order to create production batches that minimize the cost of fulfilling production orders originated by a known demand. We formulate the problem as mixed-integer program and develop a heuristic solution procedure. We show that a simplified version of the problem is equivalent to the clique partition problem, which in turn is equivalent to the graph-coloring problem. Computational experiments show that the heuristic procedure is effective in finding high-quality solutions to both the clique partition problem and the original grouping problem that includes additional costs., This work was partially supported by FEDER funds and the Spanish Ministry of Economy and Competitiveness (Projects ECO2013-47129-C4-3-R and ECO2016-76567-C4-2-R), the Regional Government of Castilla y León, Spain (Project BU329U14 and BU071G19), and the Regional Government of Castilla y León and FEDER funds (Project BU062U16).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the paper “Variable selection for linear regression in large databases: exact methods” Applied Intelligence, 51(6), 3736-3756

  • Pacheco Bonrostro, Joaquín
  • Casado Yusta, Silvia
The variable selection problem in the context of Linear Regression for large databases is analysed. The problem consists in selecting a small subset of independent variables that can perform the prediction task optimally. This problem has a wide range of applications. One important type of application is the design of composite indicators in various areas (sociology and economics, for example). Other important applications of variable selection in linear regression can be found in fields such as chemometrics, genetics, and climate prediction, among many others. For this problem, we propose a Branch & Bound method. This is an exact method and therefore guarantees optimal solutions. We also provide strategies that enable this method to be applied in very large databases (with hundreds of thousands of cases) in a moderate computation time. A series of computational experiments shows that our method performs well compared with well-known methods in the literature and with commercial software., This work was partially supported by FEDER funds and the Spanish Ministry of Economy and Competitiveness (Projects ECO2016-76567-C4-2-R and PID2019-104263RB-C44), the Regional Government of “Castilla y León”, Spain (Project BU329U14 and BU071G19), the Regional Government of “Castilla y León” and FEDER funds (Project BU062U16 and COV2000375).