Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

Repisalud
Publicación Reseña (Review)

T cells in cardiac health and disease.

  • Martín, Pilar
  • Sánchez-Madrid, Francisco
Cardiovascular disease (CVD) remains the leading cause of morbidity and mortality worldwide, with inflammation playing a pivotal role in its pathogenesis. T lymphocytes are crucial components of the adaptive immune system that have emerged as key mediators in both cardiac health and the development and progression of CVD. This Review explores the diverse roles of T cell subsets, including Th1, Th17, γδ T cells, and Tregs, in myocardial inflammatory processes such as autoimmune myocarditis and myocardial infarction. We discuss the contribution of T cells to myocardial injury and remodeling, with emphasis on specific immune receptors, e.g., CD69, that have a critical role in regulating immune tolerance and maintaining the balance between T cell subsets in the heart. Additionally, we offer a perspective on recent advances in T cell-targeted therapies and their potential to modulate immune responses and improve clinical outcomes in patients with CVD and in heart transplant recipients. Understanding the intricate interplay between T cells and cardiovascular pathology is essential for developing novel immunotherapeutic strategies against CVD.
Repisalud
Publicación Artículo científico (JournalArticle)

Lack of p38 activation in T cells increases IL-35 and protects against obesity by promoting thermogenesis.

  • Nikolic, Ivana
  • Ruiz-Garrido, Irene
  • Crespo, María
  • Romero-Becerra, Rafael
  • Leiva-Vega, Luis
  • Mora, Alfonso
  • León, Marta
  • Rodríguez, Elena
  • Leiva, Magdalena
  • Plata-Gómez, Ana Belén
  • Alvarez Flores, Maria Beatriz
  • Torres, Jorge L
  • Hernández-Cosido, Lourdes
  • López, Juan Antonio
  • Vázquez, Jesús
  • Efeyan, Alejo
  • Martin, Pilar
  • Marcos, Miguel
  • Sabio, Guadalupe
Obesity is characterized by low-grade inflammation, energy imbalance and impaired thermogenesis. The role of regulatory T cells (Treg) in inflammation-mediated maladaptive thermogenesis is not well established. Here, we find that the p38 pathway is a key regulator of T cell-mediated adipose tissue (AT) inflammation and browning. Mice with T cells specifically lacking the p38 activators MKK3/6 are protected against diet-induced obesity, leading to an improved metabolic profile, increased browning, and enhanced thermogenesis. We identify IL-35 as a driver of adipocyte thermogenic program through the ATF2/UCP1/FGF21 pathway. IL-35 limits CD8 T cell infiltration and inflammation in AT. Interestingly, we find that IL-35 levels are reduced in visceral fat from obese patients. Mechanistically, we demonstrate that p38 controls the expression of IL-35 in human and mouse Treg cells through mTOR pathway activation. Our findings highlight p38 signaling as a molecular orchestrator of AT T cell accumulation and function.
Repisalud
Publicación Artículo científico (JournalArticle)

Cytosolic protein translation regulates cell asymmetry and function in early TCR activation of human CD8 T lymphocytes.

  • Gómez-Morón, Álvaro
  • Tsukalov, Ilya
  • Scagnetti, Camila
  • Pertusa, Clara
  • Lozano-Prieto, Marta
  • Martínez-Fleta, Pedro
  • Requena, Silvia
  • Martín, Pilar
  • Alfranca, Aranzazu
  • Martin-Gayo, Enrique
  • Martin-Cofreces, Noa B
CD8 cytotoxic T lymphocytes (CTLs) are highly effective in defending against viral infections and tumours. They are activated through the recognition of peptide-MHC-I complex by the T-cell receptor (TCR) and co-stimulation. This cognate interaction promotes the organisation of intimate cell-cell connections that involve cytoskeleton rearrangement to enable effector function and clearance of the target cell. This is key for the asymmetric transport and mobilisation of lytic granules to the cell-cell contact, promoting directed secretion of lytic mediators such as granzymes and perforin. Mitochondria play a role in regulating CTL function by controlling processes such as calcium flux, providing the necessary energy through oxidative phosphorylation, and its own protein translation on 70S ribosomes. However, the effect of acute inhibition of cytosolic translation in the rapid response after TCR has not been studied in mature CTLs. Here, we investigated the importance of cytosolic protein synthesis in human CTLs after early TCR activation and CD28 co-stimulation for the dynamic reorganisation of the cytoskeleton, mitochondria, and lytic granules through short-term chemical inhibition of 80S ribosomes by cycloheximide and 80S and 70S by puromycin. We observed that eukaryotic ribosome function is required to allow proper asymmetric reorganisation of the tubulin cytoskeleton and mitochondria and mTOR pathway activation early upon TCR activation in human primary CTLs. Cytosolic protein translation is required to increase glucose metabolism and degranulation capacity upon TCR activation and thus to regulate the full effector function of human CTLs.
Repisalud
Publicación Artículo científico (JournalArticle)

Unraveling CD69 signaling pathways, ligands and laterally associated molecules.

  • Jiménez-Fernández, María
  • de la Fuente, Hortensia
  • Martín, Pilar
  • Cibrián, Danay
  • Sánchez-Madrid, Francisco
CD69 is an early leukocyte activation marker involved in the regulation of the immune response. Initial studies evaluated its function using monoclonal antibodies until knock-out mice were developed. Subsequently, four ligands for CD69 have been identified, namely galectin-1, S100A8/S100A9 complex, myosin light chains 9 and 12, and oxidized low-density lipoproteins. In addition, several molecules are laterally associated with and regulated by CD69, including calreticulin and two transmembrane receptors, sphingosine-1-phosphate receptor (S1P1) and the heterodimeric amino acid transporter complex SLC7A5-SLC3A2 (LAT1-CD98). Recently, CD69 engagement has been shown to induce the expression of the immunoregulatory receptor programmed cell death-1 (PD-1) in T cells. The molecular signaling induced by CD69 has been explored in different scenarios and cell types. This review provides a perspective on the molecular pathways, ligands and cellular functions known to be regulated by CD69.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of the barrier and mechanical properties of environmentally friendly mango kernel flour/glycerol films by varying the particle size of mango kernel flour

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] The development of environmentally friendly films based on glycerol and different sizes of mango kernel flour particles (MKF), ranging from 100 to 600 µm, is reported. The casting solution method was used to produce the films, using distilled water as the solvent. The mechanical, morphological, barrier, surface, optical, wettability and biodegradability properties of the films were assessed. The mechanical analysis revealed that smaller particles lead to superior mechanical performance in terms of tensile strength, elastic modulus and elongation at break, achieving an elongation at break of 18.1 % for the films with the smallest particle size (100 µm). These results were confirmed by field emission scanning electron microscopy (FESEM) images of the films, where the gap between the mango kernel particles and the glycerol matrix is practically non-existent in films with the smallest particle size (100 µm). On the other hand, it was observed that as the particle size decreased, the barrier properties improved, showing a decrease in water vapor permeability rate (WVPR). With respect to antioxidant properties, it was observed that the films showed strong antioxidant activity, as assessed by 2,2¿diphenyl¿1¿picrylhydrazyl (DPPH) inhibition above 90 % for all films after 1 week. Finally, MKF films proved to be completely biodegradable, with a 100 % of disintegration after 4 weeks of incubation time in compost soil, with the smallest MKF particle size films exhibiting the highest disintegration rate., This research is a part of the Grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA, Grant no. AICO/2021/025 and CIGE/2021/094 for supporting this work. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and Grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 Grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and simulation of a resorbable bone fixation plate made by additive manufacturing for femoral mid-SHAFT fractures

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] Finite element method has been employed to establish the feasibility of a fixation plate made of PLA by additive manufacturing for femoral shaft fractures. For this purpose, Von Mises stress and the pressure contact between bones had been analysed. The proposed design has been compared with an actual titanium fixation plate as a point of reference., J. Ivorra-Martinez is funded with a Formación de Profesorado Universitario (FPU) grant from the Spanish Government (Ministerio de Ciencia, Innovación y Universidades), with reference FPU19/01759.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of dibutyl itaconate on plasticization efficiency of a REX processed polylactide with peroxides

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports the effect of a reactive extrusion (REX) process on polylactide (PLA) based formulations plasticized with dibutyl itaconate (DBI). As DBI contains a carbon-carbon double bond, it is suitable for reactive extrusion. REX was carried out in a co-rotating twin extruder with the addition of two different organic peroxides. The main aim of using REX during the blending of the DBI plasticizer with PLA is to improve the interaction between them so the obtained final properties of the formulations could be improved. Plasticization process allowed to improve the ductile properties of PLA, by using REX, an improvement on the tensile strength was obtained with a no remarkable change in ductility. The thermal characterization also revealed that the glass transition temperature Tg was reduced for all formulations including DBI. REX with DBI provided a slight increase in Tg and this effect was also evident in thermomechanical properties. Regarding the thermal degradation behaviour, the plasticizer reduced the onset degradation and the maximum degradation rate, while a slight improvement on thermal stability was observed by using REX with organic peroxides. Finally, plasticizer migration in water was observed in conventional extruded PLA/DBI formulations, while REX provided improved behaviour against migration., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22) , Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) . J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Also, Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility

  • Barandiaran, Alejandro
  • Moreno-García, Virginia
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Sellés, M.A.|||0000-0002-0784-5757
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] This study demonstrates the potential of different cinnamate esters, namely methyl trans-cinnamate (MC), isobutyl cinnamate (IBC), allyl cinnamate (AC), and ethyl cinnamate (EC), as environmentally friendly plasticizers for polylactide (PLA). Plasticized PLA formulations with a constant nominal wt% of 20 of each plasticizer are compounded in a twin-screw co-rotating extruder and subsequently processed by injection molding. The results show exceptional plasticization efficiency of AC with an increase in elongation at break from 3.9% (neat PLA), up to 339.4% and a remarkable increase in impact strength, thus showing great potential to overcome the main drawback related to PLA intrinsic brittleness. The incorporation of cinnamates in a PLA matrix leads to a decrease in Tg from 61.7 °C down to 36.1 °C for the plasticized PLA formulation containing 20 wt% AC. Thermogravimetry analysis reveals that a slight plasticizer loss occurs during processing, as it happens with other monomeric plasticizers, but this phenomenon does not limit their plasticization efficiency. Therefore, the results obtained in this study confirm the suitability of a new family of organic compounds derived from the esterification of cinnamic acid as green plasticizers for PLA with improved toughness, with comparable, or even superior, ductile properties of typical plasticizers for PLA., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funding for open access charge: Universitat Politecnica de Valencia. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). JaumeGomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant(ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Juan Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Virginia Moreno wants to thank Generalitat Valenciana-GVA for funding a postdoc position through the APOSTD program co-funded by ESF Investing in your future, grant number CIAPOS/2021/67. D. Lascano acknowledge the Margarita Salas postdoctoral grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Open access funding provided by Universitat Politecnica de Valencia within the CRUE/UNIRIS gold Agreement.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of non-ester monoterpenoids as biobased plasticizers for polylactide with improved ductile behaviour

  • Tejada-Oliveros, Ramón
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Montanes, Nestor|||0000-0001-6070-127X
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] Poly(lactide) (PLA) is a biodegradable aliphatic polyester derived from renewable resources. This material is characterized by high strength and stiffness; however, it has a high brittleness which makes it difficult to use in certain applications. In the present work, the plasticizing effect of different non-ester monoterpenoids, namely carvone, citral, citronellal and eucalyptol, on the mechanical, thermal, morphological, physical and chemical properties of PLA has been studied. In this case, different amounts (10 and 20 wt%) of each monoterpenoid were mixed with PLA in a twin-screw extruder and standardized samples were obtained by injection molding. The obtained results show how the addition of 20 wt% of the different monoterpenoids significantly improves the elongation at break of PLA, reaching values of 335.7 % for 20 wt% citral content, which represents an increase of about 4044 % with respect to pure PLA (8.1 %). In addition, a significant reduction in the tensile strength and Young's modulus of PLA has also been observed with the presence of monoterpenoids. The addition of monoterpenoids also leads to a decrease in the glass transition temperature and crystallization temperature of PLA due to the increased mobility of the polymeric chains caused by the plasticizing effect of the monoterpenoids, this decrease being more noticeable in the case of citral and citronellal, which are the monoterpenoids with the highest miscibility with PLA. Finally, it has been observed that the addition of monoterpenoids hardly affects the transparency of PLA, obtaining materials that may have a high potential in sectors such as food packaging. Therefore, it has been demonstrated that these non-ester monoterpenoids, especially citral, have a great potential to obtain environmentally friendly PLA formulations with improved toughness., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. L. Quiles-Carrillo wants to thank "Vicerrectorado de Investigacion" at Universitat Politecnica de Valencia (UPV) for partial funding of this research through the program "Funds for First Research Projects" (PAID-06-22). J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy services at UPV are acknowledged for their help in using and collecting FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Procesado y caracterización de formulaciones industriales de poliésteres alifáticos mediante tecnologías de inyección y fabricación aditiva

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[ES] El principal objetivo de la presente tesis doctoral se centra en la obtención de poliésteres alifáticos con propiedades mejoradas para su empleo en procesos industriales aplicando técnicas de fabricación específicas de polímeros como son el proceso de inyección o la fabricación aditiva. Para alcanzar dicho objetivo se proponen diferentes estrategias como la incorporación de aditivos plastificantes de origen natural, la incorporación de cargas naturales, la obtención de mezclas con otros polímeros, así como la incorporación de aditivos orientados al sector médico. En una primera fase, se han estudiado los poliésteres alifáticos de la familia de los polihidroxialcanoatos - PHA. Las modificaciones realizadas a los polihidroxialcanoatos van desde la incorporación de residuos de cáscara de almendra para la obtención de composites, el desarrollo de mezclas binarias con poli(¿-caprolactona) para la mejora de las propiedades dúctiles y el análisis del efecto de diferentes plastificantes derivados de terpenoides, concretamente ésteres de geraniol. En esta primera fase se propone el uso del moldeo mediante inyección para la determinación precisa de las propiedades que alcanzan las formulaciones tras las modificaciones realizadas. Posteriormente se propone el uso de los polihidroxialcanoatos para su empleo en el sector médico debido a sus propiedades biocompatibles y bioabsorbibles. En un primer momento se opta por analizar el efecto de los parámetros a emplear en fabricación aditiva empleando PHA, siendo polímeros con una ventana de procesado bastante estrecha, y con una alta sensibilidad al grado de cristalinidad que alcanzan en función de las condiciones de enfriamiento. La incorporación de aditivos osteoconductores como la hidroxiapatita tiene un especial interés para la mejora del proceso de regeneración ósea; es por ello que se considera como aditivo para PHA en el sector médico. En un primer trabajo, se propone el uso del proceso de moldeo por inyección para determinar las propiedades que se obtienen con la incorporación de las nanopartículas de hidroxiapatita. Posteriormente, esas mismas formulaciones se emplean en impresión 3D para ofrecer una aplicación más directa al sector médico mediante la obtención de scaffolds que pueden ser empleados en procesos de regeneración ósea. Finalmente, esta tesis aborda el empleo de ácido poliláctico - PLA, empleando las técnicas de conformado mediante inyección y fabricación aditiva. El PLA es un poliéster alifático con propiedades y coste interesante, pero presenta una elevada fragilidad; es por ello que el uso de plastificantes naturales derivados de ésteres del ácido itacónico ofrece una especial relevancia para el desarrollo de formulaciones con alta ductilidad. Adicionalmente, el PLA es un material con alto interés en fabricación aditiva. El empleo de diferentes patrones y la cantidad de relleno tiene un efecto marcado sobre el comportamiento mecánico de los componentes fabricados mediante impresión 3D, que también está vinculado con el tiempo necesario para completar la impresión. Una de las aplicaciones interesantes de la fabricación aditiva con PLA, es la fabricación de dispositivos médicos con la capacidad de ser reabsorbidos por el cuerpo humano de forma progresiva. En este sentido se propone el diseño y validación de una prótesis de fijación ósea para fémur., [CA] El principal objectiu de la present tesi doctoral se centra en l'obtenció de polièsters alifàtics amb propietats millorades per al seu ús en processos industrials aplicant tècniques de fabricació específiques de polímers com són el procés d'injecció o la fabricació additiva. Per a aconseguir aquest objectiu es proposen diferents estratègies com la incorporació d'additius plastificants d'origen natural, la incorporació de càrregues naturals, l'obtenció de mescles amb altres polímers, així com la incorporació d'additius orientats al sector mèdic. En una primera fase, s'han estudiat els polièsters alifàtics de la família dels polihidroxialcanoats - PHA. Les modificacions realitzades als polihidroxialcanoats van des de la incorporació de residus de corfa d'ametla per a l'obtenció de compòsits, el desenvolupament de mescles binàries amb poli(¿-caprolactona) per a la millora de les propietats dúctils i l'anàlisi de l'efecte de diferents plastificants derivats de terpenoids, concretament èsters de geraniol. En aquesta primera fase es proposa l'ús del moldeig mitjançant injecció per a la determinació precisa de les propietats que aconsegueixen les formulacions després de les modificacions realitzades. Posteriorment es proposa l'ús d'aquests polihidroxialcanoats per al seu ús en el sector mèdic donat que tenen propietats biocompatibles i bioabsorbibles. En un primer moment s'opta per analitzar l'efecte dels paràmetres a emprar en fabricació additiva en els utilitzant PHA, donat que es tracta de polímers amb una finestra de processament bastant estreta, i amb una alta sensibilitat pel grau de cristal·linitat que aconsegueixen en funció de les condicions de refredament. La incorporació d'additius osteoconductors com la hidroxiapatita té un especial interés per a la millora del procés de regeneració òssia; és per això que es considera com a additiu per a PHA per al sector mèdic. En un primer treball, es proposa l'ús del procés de moldeig per injecció per a determinar les propietats que s'aconsegueixen amb la incorporació de les nanopartícules d'hidroxipatita. Posteriorment, aqueixes mateixes formulacions s'utilitzen en impressió 3D per oferir una aplicació més directa al sector mèdic mitjançant l'obtenció d'scaffolds que poden ser emprats en processos de regeneració òssia. Finalment, aquesta tesi aborda l'ús de l'àcid poliláctic - PLA emprant les tècniques de conformat mitjançant injecció i fabricació additiva. El PLA és un polièster alifàtic amb propietats i cost interessants, però presenta una elevada fragilitat; és per això que l'ús de plastificants naturals derivats d'èsters de l'àcid itacònic té una especial rellevància per al desenvolupament de formulacions amb alta ductilitat. Addicionalment, el PLA és un material amb alt interés en fabricació additiva. L'ús de diferents patrons i la quantitat de farciment té un efecte marcat sobre el comportament mecànic dels components fabricats mitjançant impressió 3D, que també està vinculat amb el temps necessari per a completar la impressió. Una de les aplicacions interessants de la fabricació additiva amb PLA, és la fabricació de dispositius mèdics amb la capacitat de ser reabsorbits pel cos humà de manera progressiva. En aquest sentit es proposa el disseny i validació d'una pròtesi de fixació òssia per a fèmur., [EN] The main objective of this thesis is to obtain aliphatic polyesters with improved properties for their application in industrial processes by applying conventional polymer processing techniques such as injection moulding and additive manufacturing. In order to reach the aforementioned objective several strategies are proposed such as the incorporation of natural origin plasticizing additives, the incorporation of natural fillers, the development of polymer blends and the incorporation of additives for the medical sector. The first stage of this research consists in the study of aliphatic polyesters from polyhydroxyalkanoates - PHA. The modifications made to those polymers have been the introduction of almond shell wastes to produce composites, the development of binary blends with poly(¿-caprolactone) to improve ductile properties and the addition of different plasticizers derived from terpenoids, more specifically geraniol esters. In this first stage, injection-moulding is proposed to obtain all the properties and features of the formulations after the aforementioned modifications. Afterwards, the use of these polyhydroxyalkanoates in the medical sector due to they are biocompatible and resorbable, is proposed. First, the effect of the parameters to be used in additive manufacturing of PHA is analysed. These polymers possess a very narrow processing window and a great sensitiveness to the degree of crystallinity depending on the cooling conditions. The incorporation of osteoconductive additives such as hydroxyapatite is of great interest for the improvement of the bone regeneration process, so it is considered as an additive of PHA for medical applications. It is for this reason that in the first work, injection moulding is used for determining the effect of nanohydroxyapatite have on the polymer matrix. Then, the developed formulations are used in 3D printing to assess the feasibility of this technology for the medical sector by obtaining scaffolds structures that can be used in bone regeneration processes. Finally, poly(lactic acid) - PLA is processed by injection-moulding and additive manufacturing to assess the feasibility of these techniques. PLA is a cost-effective aliphatic polyester with balanced properties; nevertheless, it shows high intrinsic brittleness. Therefore, the use of natural plasticizers derived from esters of itaconic acid are of especial interest for the development of formulations with improved toughness. Additionally, PLA is a material with a great interest in additive manufacturing. The use of different patterns and infills used in 3D printing play a key role on mechanical behavior of the 3D-printed components, which is also related to the overall 3D-printing time. One of the interesting applications of additive manufacturing with PLA, is the production of medical devices with the ability to be progressively reabsorbed by the human body. In this sense, the design and validation of a femur fixing prosthesis is proposed., I would like to thank the Ministry of Universities for their financial support through the FPU grant FPU19/01759 regarding my PhD studies. I am very grateful to Universitat Politècnica de València for their financial support through the FPI PhD grant PAID–2019– SP20190011. I thank the Ministry of Science and Innovation for their financial support to the research group in the projects RTI2018–097249–B–C21, MAT2017–84909–C2–2–R and PID2020–116496RB–C22. I acknowledge Generalitat Valenciana for their grants AICO/2021/025 and CIGE/2021/094 as a support to the research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green antioxidant composites based on coffee by-products from the alcohol industry

  • Terroba-Delicado, Enrique
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Montanes, Nestor|||0000-0001-6070-127X
[EN] Bio-based high-density polyethylene (BioHDPE)-loaded composites with different amounts of spent coffee powder (up to 30 wt.%) were successfully produced. The use of coffee residues coming from the alcoholic beverage industry in a BioHDPE matrix resulted in a remarkable improvement in the antioxidant properties of the composites. Waste spent coffee powder reduced the elastic modulus, hardness and storage modulus; the reduction was proportional to the amount of by-product considered. To improve the interaction between the highly hydrophobic BioHDPE matrix and the highly hydrophilic spent coffee powder, a copolymer - namely, poly(ethylene-graft-maleic anhydride) (PE-g-MA) - was used. PE-g-MA addition resulted in an improved interaction between the particles and poly(lactic acid), as confirmed by field emission scanning electron microscopy. On the other hand, the presence of the lignocellulosic filler resulted in a low load transfer between the two components, which led to a decrease in tensile strength. The introduction of coffee powder resulted in an improvement in thermal stability, as confirmed by thermogravimetry and differential scanning calorimetry. Finally, antioxidant activity was also observed in the composites, wherein a 27% reduction in 2,2-diphenyl-1-picrylhydrazyl was reported for the composite with the highest coffee content. The presence of antioxidant substances (coffee oil) was confirmed by Fourier transform infrared spectroscopy., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). J. Ivorra-Martinez would like to express thanks for FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Gomez-Caturla would like to express thanks for FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Also, Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images. The authors also want to acknowledge Licores Sinc (Alcoy, Spain) for its collaboration in this project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the chain length of geraniol esters on the plasticization efficiency with poly(lactide)

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Tejada-Oliveros, Ramón
  • Moreno-García, Virginia
[EN] This work reports on the development of environmentally friendly PLA formulations utilizing different esters derived from geraniol as plasticizers. Geranyl formate, acetate, propionate, butyrate, isovalerate and caproate at 10 wt% were combined with PLA in formulations that were produced through extrusion and injection moulding processes. Theoretical solubility parameter studies predicted good miscibility between PLA and all the plasticizers. This was confirmed by tensile test, which showed elongation at break values between 200 and 300 %, totally in contrast with the 8 % value of neat PLA. Geranyl acetate and geranyl formate exhibited the highest elongation at break behavior. These values of elongation at break were supported by FESEM images, which showed clear signs of plasticization. The plasticization effect was further corroborated by DSC and DMTA analysis, where a clear decrease in the glass transition temperature was observed from a typical value of 60 °C for neat PLA down to 40¿50 °C for the plasticized blends. This was related to an enhanced chain mobility of the amorphous regions of PLA. Moreover, the plasticizers slightly increased the water absorption capabilities of PLA, as demonstrated by an increase in the water contact angle and water uptake for 11 weeks., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021- 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice -rectorate for Research of the Universitat Politecnica de Valencia (UPV) . R.T.-O. wishes to thank UPV for the grant received though the PAID-01-20 program. J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. V. M. thanks Ge eralitat Valenciana-GVA for funding a postdoc position through the APOSTD program co -funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-cost fabrication and characterisation of a flexible graphite-based touch sensor, Fabricación y caracterización de bajo coste de un sensor táctil flexible basado en grafito

  • Tormo-García, Francisco-Javier
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Montanes, Nestor|||0000-0001-6070-127X
[ES] En el presente trabajo se expone un nuevo método de elaboración de un sensor piezoresistivo flexible basado en grafito. Bajo la premisa de una fabricación low cost, los materiales empleados son de fácil adquisición y el proceso de fabricación consiste en una sencilla transferencia y exfoliación de una pasta de grafito para obtener láminas flexibles. De esta forma se obtienen sensores con sensibilidad al tacto y la presión. Para caracterizar su respuesta, se ha desarrollado un método ad hoc que pretende recrear la interacción del sensor con un dedo humano, el cual es mostrado con detalle. El resultado presentado es un sensor de grafito de alta sensibilidad, estable y con múltiples posibilidades de aplicación, como por ejemplo en prótesis inteligentes, en sistemas de captura del movimiento del cuerpo humano y hasta incluso para su uso como piel sintética., J. I.-M. quiere agradecer la beca FPU19/01759 financiada por MCIN/AEI/10.13039/501100011033 y por ESF Investing in your future. Esta investigación forma parte del proyecto PID2020-116496RB-C22 financiado por MCIN/AEI/10.13039/501100011033, y de los proyectos AICO/2021/025 y CIGE/2021/094 financiados por Generalitat Valenciana-GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Performance of Environmentally Friendly Blends of Biobased Polyethylene and Kraft Lignin Compatibilized by Reactive Extrusion with Dicumyl Peroxide

  • Rojas-Lema, Sandra Paola
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this work, different contents (0.25, 0.50, 0.75, and 1 phr) of dicumyl peroxide (DCP) are incorporated into the bio-based high-density polyethylene (bioPE)/kraft lignin (KL) blends with a composition of 80 and 20 wt%, respectively with the aim of improving overall performance. The samples are obtained by reactive extrusion and injection-molding process, and then their overall performance is assessed by tensile tests, thermal analysis, optical and surface appearance, and wettability studies. The obtained mechanical properties confirm the successful interaction between bioPE and KL due to the addition of organic peroxide, which plays a key role in compatibilization. In particular, bioPE/KL blends with 1 phr of DCP achieve an increase in elongation at break of about 300% together with a noticeable increase in the impact strength of about 29% higher than the uncompatibilized bioPE/KL blend, while the tensile modulus decreases 42%. In addition, images obtained by field emission scanning electron microscopy show that the presence of DCP in the blends enhances better dispersion of KL into the bioPE matrix. The wettability analysis indicates that KL and DCP affect the hydrophobicity of the neat bioPE. Therefore, the resultant blends can be considered as potential sustainable polymers with balanced properties., S.R.-L. is a recipient of a Santiago Grisolía grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). D.L. thanks Universitat Politècnica de València (UPV) for the grant received through the PAID-01-18 program. J.I.-M. thanks the Spanish Ministry of Science, Innovation and Universities for his FPU grant (FPU19/01759). Microscopy services at UPV are acknowledged for their help in using and collecting FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cytomegalovirus Reactivation Is Associated With Lower Rates of Hepatocellular Carcinoma Recurrence After Liver Transplantation

  • Aguilera, Victoria
  • Romero Moreno, Sarai
  • Conde, Isabel
  • Rubín, Angel
  • Carvalho-Gomes, Angela
  • Romero, Mario
  • Zamora-Olaya, Javier
  • Gómez-Bravo, Miguel Angel
  • Fuentes-Valenzuela, Esteban
  • Dopazo, Cristina
  • Bilbao, Nikita
  • Gonzalez, Antonio
  • Sanchez-Martinez, Ana
  • Pascual, Sonia
  • Rivera-Esteban, Jesus
  • Martínez-Arenas, Laura
[EN] In patients with hepatocellular carcinoma (HCC), undergoing liver transplantation (LT), cytomegalovirus reactivation (CMVr) may modulate the immune system to prevent tumor recurrence. In this multicenter retrospective study (2010-2015) involving 15 institutions, we assessed the effect of early CMVr in tumor recurrence rates among 771-LT HCC patients with tacrolimus-based immunosuppression (88% men, mean age 58 years). CMV prophylaxis was implemented for 19.7% of patients, while the rest were managed with preemptive therapy. The Milan criteria were met by 88% of patients. Microvascular invasion was present in 12.7% of explanted livers. The serum AFP level before transplantation was 5.1 (3-15) ng/mL. After a median follow-up of 7.4 years, 101 patients (13%) experienced HCC recurrence. CMVr occurred in 235 patients (30.5%) at a median of 41.5 days post-LT and 42 patients (5.6%) had CMV disease. Cumulative exposure to tacrolimus within the first 3 months after LT was similar among patients with and without CMVr. In a multivariate Cox regression analysis, factors associated with an increased rate of HCC recurrence included microvascular invasion [HR:2.82, CI95%:1.55-5.14; p 0.0001], donation after circulatory determination of death [HR:4.43,CI95%:1.52-12.9; p 0.006) and diameter of the main nodule at explant [HR:1.04, CI95%:1.02-1.06; p < 0.001]. Meanwhile CMVr [HR:0.46, CI95%:0.23-0.93, p 0.031] and MELD [HR:0.93, CI95%:0.87-0.99; p0.017] exhibited protective effects. In conclusion, early CMVr may protect against HCC recurrence. The underlying immune mechanisms warrant further investigation., The author(s) declare that financial support was received for the research and/or publication of this article. This study was supported by competitive grants from the Instituto de Salud Carlos III (grant numbers: PI13/01770 and PI18/01759), and co-financed by the European Regional Development Fund "A way to achieve Europe." AC-G and MB were also supported by the Centro de Investigacion Biomedica en Red de Enfermedades Hepaticas y Digestivas (CIBERehd) (https://www.ciberehd.org/), which is funded by the Instituto de Salud Carlos III (co-financed by the European Regional Development Fund). VA has received a grant from the AEEH (Asociacion Espanola para el Estudio del Higado, Spain): Beca de Intensificacion. AC-G received a postdoctoral Fellowship from CiberEHD and MB was supported by competitive grants from the Instituto de Salud Carlos III (grant numbers PI23/00088 and INT24/00021) and by Generalitat Valenciana (grant numbers AICO/2021/035 and CIPROM/2023/16). Victoria Aguilera received a grant from the AEEH "Beca de intensificacion para investigadores" in 2021. LM-A was supported by the Instituto de Salud Carlos III (grant numbers FI20/00033 and MV22/00053).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasticization of poly(3-hydroxybutyrate) with biobased terpenoid esters of geraniol

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
  • Valencia, Yago
  • Agüero, Ángel
  • Arrieta, Marina Patricia
[EN] Poly(3-hydroxybutyrate) (P3HB) is, by far, one of the most promising bacterial polyesters at the commercial scale, but it is a brittle polymer due to physical aging occurring at room temperature, which promotes secondary crystallization. Plasticization is a cost-effective and technical approach to overcome or minimize, this drawback. In this work, the use of terpenoid-based organic compounds as plasticizers for P3HB is proposed. Geranyl esters with different chain length carboxylic acids, namely acetic (C2), propionic (C3), butyric (C4), and isovaleric (C5) acids, are used at a constant proportion with the main aim of improving the ductility of P3HB. In addition, thermal properties, morphology, and disintegration are also addressed. All geraniol-based plasticizers provided increased ductility. The elongation at break of neat P3HB (7.4%) increased up to 9.7%, which represents a percentage increase of 31.1%. A remarkable increase in toughness is also obtained by a change in the impact strength from 2.2 kJ·m¿2 (neat P3HB) up to 3.4 kJ·m¿2 with geranyl acetate. Thus, the proposed P3HB formulations widen the potential uses of P3HB since its ductile properties are improved. Other relevant results are related to the glass transition temperature reduction and an increase in the disintegration rate in controlled compost soil., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Likewise, Ángel Agüero thanks his Margarita Salas postdoctoral contract with the Universitat Politècnica de València, financed through the Ministry of Universities, by the European Union-Next generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of P(3HB-co-3HHx) nanohydroxyapatite (nHA) composites for scaffolds manufacturing by means of fused deposition modeling

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ferrer, Ines
  • Aguado, Roberto
  • Delgado-Aguilar, Marc
  • Garcia-Romeu, Maria Luisa
[EN] This work reports on the development of nanocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] and nanohydroxyapatite (nHA) for the development of scaffolds by means of a two-stage extrusion process followed by a 3D printing process. Tensile test samples were produced for the characterization of the materials. Each processing thermal cycle promoted a slight thermal degradation, identified by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Also, a viscosity reduction was observed in the rheological measurements. The 3D-printed tensile test samples exhibited increasing stiffness at increasing nHA content (with elastic modulus values close to 1000 MPa), while tensile strength and strain at break were reduced. Nonetheless, the deposition direction oriented with the tensile direction (raster angle of 0°C) exhibited the highest tensile strength (18 MPa) but lower elongation at break than the 45/45°C deposition, which resulted in the highest strain (up to 17 %). Regarding the scaffolds, they were degraded in phosphate-buffered saline at 37°C for 8 weeks. This degradation was identified by a reduction of their weight (between 1.5% and 3.0%) and reduced mechanical behavior measured by means of a compression test. Scaffolds showed a decrease of the compression strength (from values close to 13 MPa to 9 MPa)., Juan Ivorra-Martinez wants to thank for the FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ESF Investing in Your Future. Funding for open-access charge is provided by Universitat Politècnica de València (UPV). Marc Delgado-Aguilar is a Serra Húnter Fellow. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images. This work is supported bythe grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union. Authors also thank Generalitat Valenciana-GVA for Funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. This study is also funded by Aid for First Research Projects (PAID-06-22) , Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and characterization of high environmental performance composites of Bio-PBSA and short hemp fibers from different compatibilization strategies, Desarrollo y caracterización de compuestos de alto rendimiento medioambiental de Bio-PBSA y fibras cortas de cáñamo a partir de diferentes estrategias de compatibilización

  • Tejada-Oliveros, Ramón
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this research work, the effect of various compatibilizing agents on naturally sourced composites formed from poly(butylene succinate-co-adipate) - PBSA and short hemp fibers has been analyzed. Hemp has been employed as a natural reinforcement to obtain environmentally friendly composites, using biobased PBSA as a matrix. These composites were obtained from twin-screw extrusion and shaped by injection molding. To improve the poor compatibility between the matrix and lignocellulosic fibers, different compatibilizing agents were used, including a maleic anhydride graft copolymer (PBSA-g-MA), a copolymer based on itaconic acid (PBSA-g-IA) and dibutyl itaconate (DBI). The addition of these compatibilizers provided different levels of improvement with respect to the PBSA/hemp base compound. In relation to the mechanical properties, the addition of the copolymers significantly increased the maximum tensile stress, with values around 20 MPa, with respect to the 8,86 MPa of the PBSA/hemp uncompatibilized composite. The addition of DBI to the base blend led to an improvement in the elongation at break of 82% (3,51% elongation at break of the base blend versus 6,40% with the addition of DBI). These results are in agreement with those obtained in dynamic mechanical thermal analysis (DMTA), where the incorporation of hemp fibers and the combination of the different compatibilizers resulted in an improvement in stiffness over the entire temperature range., Los autores agradecen la financiación otorgada gracias al proyecto con número de subvención PID2020-116496RB-C22 financiado por el Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 y número de subvención AICO/2021/025 financiado por la Generalitat Valenciana. R. T.-O. quiere agradecer a la UPV la subvención recibida a través del programa PAID-01-20. J. I.-M. quiere agradecer la beca FPU19/01759 financiada por MCIN/AEI/10.13039/501100011033 y por el FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of starch-rich thermoplastic polymers based on mango kernel flour and different plasticizers

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports on the development of starch-rich thermoplastic based formulations produced by using mango kernel flour, avoiding the extraction process of starch from mango kernel to produce these materials. Glycerol, sorbitol and urea at 15 wt% are used as plasticizers to obtain thermoplastic starch (TPS) formulations by extrusion and injection-moulding processes. Mechanical results show that sorbitol and urea allowed to obtain samples with tensile strength and elongation at break higher than the glycerol-plasticized sample, achieving values of 2.9 MPa of tensile strength and 42% of elongation at break at 53 % RH. These results are supported by field emission scanning electron microscopy (FESEM) micrographs, where a limited concentration of voids was observed in the samples with sorbitol and urea, indicating a better interaction between starch and the plasticizers. Thermogravimetric analysis (TGA) shows that urea and sorbitol increase the thermal stability of TPS in comparison to the glycerol-plasticized sample. Differential scanning calorimetry (DSC) and dynamic-mechanical-thermal analysis (DMTA) verify the increase in stiffness of the sorbitol and urea plasticized TPS and also illustrate an increase in the glass transition temperature of both samples in comparison to the glycerol-plasticized sample. Glass transition temperatures of 45 °C were achieved for the sample with sorbitol., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Potential of an Itaconic Acid Diester as EnvironmentallyFriendly Plasticizer for Injection-Molded Polylactide Parts

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Peydro, M. A.|||0000-0002-8503-1505
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work reports on the use of dibutyl itaconate (DBI) as an environmentallyfriendly plasticizer for polylactide (PLA) with different proportions of DBI inthe 2.5¿20 wt% (weight content) range. A co-rotating twin-screw extrusionprocess followed by injection molding is employed for the manufacturing ofthe samples. The results show that the plasticized PLA formulation with10 wt% DBI offers the most balanced overall properties, with a noticeableincrease in the elongation at break from 4.6% (neat PLA) up to 322%, with atensile modulus of 1572 MPa, and a tensile strength of 23.8 MPa. In the caseof 15 and 20 wt% DBI formulations, PLA reaches the saturation point with nomore increase in the elongation at break and a clear decrease in the tensilemodulus. DBI also decreases the glass transition temperature (Tg)from61.3°C (neat PLA) down to 23.4°C for plasticized PLA formulation containing20 wt% DBI, thus showing the high plasticization efficiency of DBI., J.I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J.G.-C. wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Also, Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the grant AICO/2021/025 funded by Generalitat Valenciana-GVA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and evaluation of novel nanofibers based on mango kernel starch obtained by electrospinning

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] This work reports on the development of fibers based on natural mango kernel starch (MKS) with diameters in the nanoscalse by means of the electrospinning technique. MKS was extracted from mango kernels and two synthetic polymers, namely polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP), were blended with MKS in order to improve its spinnability, obtaining MKS/PVA and MKS/PVP fibers with a 10 wt% of total polymer concentration. Several electrospinning conditions (voltage and flux) were tested in solutions of MKS concentrations ranging from 0 to 5 wt% for both group of fibers. The morphology of all the fibers was evaluated by field emission scanning electron microscopy (FESEM) and their topography was analysed by means of atomic force microscopy (AFM). MKS/PVA nanofibers were obtained with a diameter range from 0.146 to 0.315 ¿m, with a ¿smooth fiber concentration threshold¿ of 3 wt%, while MKS/PVP, fibers with diameters from 0.080 to 0.339 ¿m were produced, but 5 wt% MKS concentration fibers were beaded fibers, as a result of an excess in starch concentration. Finally, the roughness of the optimal fibers showed quite a similar trend to that of fiber diameter, presenting roughnessess between 80 and 343 nm., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025 for supporting this work. J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manufacturing and Characterization of High-Density Polyethylene Composites with Active Fillers from Persimmon Peel Flour with Improved Antioxidant Activity and Hydrophobicity

  • Rojas-Lema, Sandra Paola
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] The potential of persimmon peel waste (PPF) as renewable active filler in biobased polyethylene composites, with improved antioxidant properties and resistance to water uptake is shown. To improve the interaction between the hydrophilic biofiller and the highly hydrophobic matrix, several compatibilization approaches are assessed. The first approach consists of using a polyethylene grafted copolymer with maleic anhydride (PE-g-MA). The second approach consists of modifying the PPF surface with two treatments before compounding with Bio-HDPE. The first consists on conventional silanization with (3-glycidyloxypropyl)trimethoxysilane, while the second consists on esterification with palmitoyl chloride. The results show an improvement of the matrix/biofiller interaction, as observed by field emission scanning electron microscopy (FESEM), leading to an increase in Young¿s modulus of 10% in composites compatibilized with PE-g-MA, and silanized PPF compared to composites without compatibilizer and no surface treatment on PPF. Interestingly, treatment with palmitoyl chloride leads to an increase in the hydrophobic behavior of composites keeping the water contact angle virtually constant at 128°. This effect is also reflected in a clear decrease in water absorption capacity of only 0.3 wt% over 9 weeks. Finally, PPF increases stabilization against oxidation, improving the oxidation induction time from 4.8 min (Bio-HDPE) to 82.5 min for composites with silanized PPF., The authors want to thank the Spanish Ministry of Science and Innovation, grant number MEN PID2020-116496RB-C22 for funding this research. D.L. wants to thank UPV for the grant received though the PAID-01-18 program. S.R.-L. is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). J.G.-C. wants to thank Universitat Politècnica de València for his FPI grant from (SP20200080). J.I.-M. thanks the Spanish Ministry of Science, Innovation and Universities for his FPU grant (FPU19/01759). Microscopy services at UPV are acknowledged for their help in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of bacterial cellulose obtained from kombucha fermentation in spent coffee grounds for active composites based on PLA and maleinized linseed oil

  • Agüero, Ángel
  • Arrieta, Marina P.
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Spent coffee grounds have been successfully used as an alternative infusion for kombucha fermentation (spent coffee kombucha, SCK). The obtained by-product of this fermentation consists of a kombucha bacterial cellulose (KBC) matrix. The bacterial cellulose was also fermented in pristine coffee grounds infusion for comparison (coffee kombucha, CK). The bacterial cellulose obtained from both infusion fermentations (SCK and CK) was used as filler in PLA matrix plasticized with a 5 wt% of maleinized linseed oil (MLO). Two different content of SCK and CK (3 and 5 wt%) were introduced in the PLA-MLO matrix to produce a film using a conical twin-screw microextruder to simulate the industrial processing conditions. The resultant bio-based films were studied in tern of morphological, tensile, and thermal properties, UV¿visible absorption, water vapor permeability, and wettability. The antioxidant activity of the obtained materials was tested in contact with a fatty food simulant demonstrating antioxidant activity. In addition, disintegrability tests under composting conditions confirmed the compostable character of all films. The obtained results suggest the potential applicability of these bio-based materials obtained by the revaluation of HoReCa waste in antioxidant materials with interest as food packaging or for agricultural uses., This research contributes to "The Circular and Regenerative Campus" community from the EELISA European University Alliance. Authors gratefully acknowledge Alcoin for kindly providing the coffee waste recovered at the University canteen of the Industrial Engineering School of the Polytechnic University of Madrid (ETSII-UPM). This research was funded by the Spanish Ministry of Science and Innovation (MICINN) through PID-AEI project (grants PID2020-116496RB-C22 and PID2021-123753NA-C32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" by the "Euro-pean Union" and TED-AEI Projects (grants TED2021-129920A-C43 and TED2021-131762A-I00) and "Consolidaci'on Investigadora" Project (grant CNS2022-136064 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". It was also funded by Comunidad de Madrid-CAM ("Ayudas de Estimulo a la Investigaci'on de J'ovenes Doctores de la Universidad Polite'cnica de Madrid", APOYO-JOVENES-21-VUI9G6-56-I7GABQ) and Generalitat Valenciana-GVA grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Meanwhile, Ph.D. 'A. Agueero and Ph.D. D. Lascano acknowledge the Margarita Salas postdoctoral grants from the Ministerio de Uni-versidades, Spain, funded by the European Union-Next Generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the mechanical properties of polylactide composites with jute reinforcements

  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Montanes, Nestor|||0000-0001-6070-127X
  • Cristobal Aljaro
  • Eduardo Fages
  • Sandra Rojas-Lema
[EN] Concern has arisen in recent years over the excessive use of oil-based materials, making the development of new materials with a low environmental impact all the more urgent. In this study, environmentally friendly composites were obtained using a thermoplastic polylactide (PLA) matrix with jute fibers (fabrics and non-woven mats) as reinforcement. PLA/jute biocomposites were manufactured by thermocompression. The effect of the amount of jute fiber reinforcement (in the 30¿50¿wt.% range) on the tensile and flexural properties of these composites was analyzed, and the fiber¿matrix interaction was assessed by scanning electron microscopy. The results show that thermocompression molding is a simple technique for obtaining high-environmental-efficiency biocomposites with high reinforcement loadings (up to 50¿wt.%). As expected, the tensile properties are directly related to the amount of fiber loading, as well as the directionality of these fibers in the composite. Mechanical performance is also highly dependent on fiber¿matrix interactions. These biocomposites could be attractive as lightweight interior panels in the automotive industry, cases/covers in electric/electronic applications, and turbine blade components in the wind energy industry, among others, due to their balanced mechanical properties and the rather complex shapes that could be obtained by thermocompression., This research is part of grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033 and grant AICO/2021/025 funded by Generalitat Valenciana (GVA). S. Rojas-Lema is a recipient of a Santiago Grisolía grant from GVA (GRISOLIAP/2019/ 132). D. Lascano wants to thank Universitat Politècnica de València (UPV) for the grant received through the PAID-01-18 program. J. Ivorra-Martinez wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in Your Future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of Poly(lactide) Ductile Properties by Plasticization with Biobased Tartaric Acid Ester

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Moreno, Virginia
[EN] Diethyl l-tartrate (DET) is used as a biobased plasticizer for poly(lactide) (PLA) formulations with improved ductile properties without compromising biodegradation. Different weight percentages (wt.%) of DET in the 0¿50 wt.% range are added to PLA by melt compounding and subsequently processed by injection molding. The effect of wt.% DET on mechanical, thermal, thermo-mechanical, morphology, biodegradation, and crystallinity is studied. Addition of 20 wt.% DET leads to a noticeable increase in elongation at break up to values of 567%, which is quite an interesting result considering the extreme brittleness of PLA. These results are verified by field emission scanning electron microscopy (FESEM) images, where filament-like structures are observed, indicative of an effective plasticization. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) show that the glass transition temperature of PLA is drastically decreased down to values of 23 °C for the sample with the highest amount of DET (50 wt.%), thus increasing its ductility and processability. Fourier-transformed infrared spectroscopy (FTIR) spectra show that there exists chemical interactions between PLA and DET. Finally, the biodegradability analysis proves that the developed blends are fully biodegradable, achieving complete disintegration after 49 days. It is observed that DET enhanced the disintegration rate of PLA., This research was a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. The authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025 and CIGE/2021/094 for supporting this work. J.G.-C. wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J.I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. V.M. wants to thank Generalitat Valenciana - GVA for funding a postdoc position through the APOSTD program co-funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo y caracterización de polímeros de alto rendimiento medioambiental derivados de residuos agroindustriales y aditivos de origen renovable

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[ES] La presente tesis doctoral tiene como principal objetivo el desarrollo de materiales poliméricos que sean respetuosos con el medio ambiente y favorezcan modelos de economía circular, centrando las líneas de investigación en el reaprovechamiento de residuos de la industria del mango y en la utilización de ácido poliláctico (PLA) como principal matriz polimérica. Para ello se emplean diferentes técnicas de procesado como el electrospinning, la extrusión, la inyección o la producción de films por disolución. Además, se plantea la utilización de diferentes aditivos como plastificantes y cargas lignocelulósicas de origen renovable para mejorar las propiedades de estos materiales sin comprometer su alto potencial medioambiental. El primer bloque de la tesis centra sus esfuerzos en el reaprovechamiento de diferentes residuos del mango (uno de los cultivos más populares del mundo), como la piel y el kernel, para desarrollar diferentes materiales con un gran contenido natural. Dentro de los estudios realizados en este bloque se incluye la extracción de almidón a partir del kernel de mango para la posterior fabricación de nanofibras por electrospinning, con gran aplicación en el sector médico. Otros estudios realizados proponen la combinación de matrices poliméricas como el biopolipropileno y el PLA, en combinación con harina de piel de mango y harina de hueso de mango, respectivamente, mediante procesos de extrusión, extrusión reactiva (REX) e inyección. En el caso del biopolipropileno se utilizan además agentes compatibilizantes basados en ácido itacónico para aumentar la adhesión entre las partículas lignocelulósicas de la piel del mango con la matriz polimérica, la cual es altamente apolar. Por otro lado, a las formulaciones de PLA y harina de hueso de mango se le añaden plastificantes como la triacetina y la tributirina para aumentar las propiedades dúctiles del PLA. Un cuarto estudio se enfoca en la producción de films de glicerol con harina de hueso de mango, rica en almidón, para observar cómo afecta el tamaño de partícula de la harina sobre las propiedades de los films. Por último, se propone el desarrollo de materiales termoplásticos ricos en almidón utilizando harina de kernel de mango en combinación con diferentes plastificantes como glicerol, sorbitol y urea. Estos materiales ricos en almidón son procesados por extrusión e inyección y son completamente biodegradables y de origen natural. El segundo y último bloque de la tesis está enfocado a la utilización del ácido poliláctico obtenido de fuentes renovables en procesos de extrusión e inyección. Este poliéster es un polímero biodegradable cuya principal desventaja es su gran fragilidad. Por ello, se han empleado diferentes tipos de plastificantes naturales para incrementar las propiedades dúctiles del PLA. En un primer trabajo, se combina el PLA con α-terpinil acetato, un plastificante de origen renovable. Además, se añade piel de mandarina molida como carga natural para evaluar si este plastificante es capaz de aumentar la ductilidad de mezclas de PLA con cargas lignocelulósicas, obtenido resultados muy positivos. Un segundo trabajo plantea la combinación de PLA con dietil-L-tartrato, un plastificante obtenido del ácido tartárico, encontrado en la uva y el tamarindo, obteniendo elongaciones de más de un 300%. Por último, dos estudios más plantean la combinación de PLA con terpenoides, más concretamente ésteres de geranilo y linalilo. En este sentido, uno de los trabajos se centra en variar la proporción de acetato de linalilo y acetato de geranilo en las composiciones, mientras que el otro trabajo evalúa como afecta la longitud de cadena de los ésteres de geranilo a la plastificación del PLA. Todos los plastificantes utilizados en este bloque ofrecieron resultados muy prometedores, con alargamientos a la rotura superiores al 200% en materiales completamente naturales y biodegradables con gran aplicación en el sector alimentario y del envase y embalaje., [CA] La present tesi doctoral té com a principal objectiu el desenvolupament de materials polimèrics que siguen respectuosos amb el medi ambient i afavorisquen models d'economia circular, centrant les línies d'investigació en el reaprofitament de residus de la indústria del mango i en la utilització d'àcid polilàctic (PLA) com a principal matriu polimèrica. Per a això s'empren diferents tècniques de processament com l'electrospinning, l'extrusió, la injecció o la producció de films per dissolució. A més, es planteja la utilització de diferents additius com a plastificants i càrregues lignocelulòsiques d'origen renovable per a millorar les propietats d'aquests materials sense comprometre el seu alt potencial mediambiental. El primer bloc de la tesi centra els seus esforços en el reaprofitament de diferents residus del mango (un dels cultius més populars del món), com la pell i el kernel, per a desenvolupar diferents materials amb un gran contingut natural. Dins dels estudis realitzats en aquest bloc s'inclou l'extracció de midó a partir del kernel de mango per a la posterior fabricació de nanofibers per electrospinning, amb gran aplicació en el sector mèdic. Altres estudis realitzats proposen la combinació de matrius polimèriques com el biopolipropilè i el PLA, en combinació amb farina de pell de mango i farina d'os de mango, respectivament, mitjançant processos d'extrusió, extrusió reactiva (REX) i injecció. En el cas del biopolipropilè s'utilitzen a més agents compatibilitzants basats en àcid itacònic per a augmentar l'adhesió entre les partícules lignocelulòsiques de la pell del mango amb la matriu polimèrica, la qual és altament apolar. D'altra banda, a les formulacions de PLA i farina d'os de mango se li afigen plastificants com la triacetina i la tributirina per a augmentar les propietats dúctils del PLA. Un quart estudi s'enfoca en la producció de films de glicerol amb farina d'os de mango, rica en midó, per a observar com afecta la grandària de partícula de la farina sobre les propietats dels films. Finalment, es proposa el desenvolupament de materials termoplàstics rics en midó utilitzant farina de kernel de mango en combinació amb diferents plastificants com glicerol, sorbitol i urea. Aquests materials rics en midó són processats per extrusió i injecció i són completament biodegradables i d'origen natural. El segon i últim bloc de la tesi està enfocat a la utilització de l'àcid polilàctic obtingut de fonts renovables en processos d'extrusió i injecció. Aquest polièster és un polímer biodegradable el principal desavantatge del qual és la seua gran fragilitat. Per això, s'han emprat diferents tipus de plastificants naturals per a incrementar les propietats dúctils del PLA. En un primer treball, es combina el PLA amb α-terpinil acetat, un plastificant d'origen renovable. A més, s'afig pell de mandarina molta com a càrrega natural per a avaluar si aquest plastificant és capaç d'augmentar la ductilitat de mescles de PLA amb càrregues lignocelulòsiques, obtenint resultats molt positius. Un segon treball planteja la combinació de PLA amb dietil-L-tartrat, un plastificant obtingut de l'àcid tartàric, trobat en el raïm i el tamarinde, obtenint elongacions de més d'un 300%. Finalment, dos estudis més plantegen la combinació de PLA amb terpenoids, més concretament èsters de geranil i linalil. En aquest sentit, un dels treballs se centra en variar la proporció d'acetat de linalil i acetat de geranil en les composicions, mentre que l'altre treball avalua com afecta la longitud de cadena dels èsters de geranil a la plastificació del PLA. Tots els plastificants utilitzats en aquest bloc van oferir resultats molt prometedors, amb allargaments al trencament superiors al 200% en materials completament naturals i biodegradables amb gran aplicació en el sector alimentari i de l'envàs i embalatge., [EN] The present doctoral thesis has as its main objective the development of polymeric materials that are environmentally friendly and promote circular economy models, focusing research on the reuse of waste from the mango industry and the use of polylactic acid (PLA) as the main polymer matrix. Various processing techniques such as electrospinning, extrusion, injection, or cast film are employed for this purpose. In addition, the use of different additives such as plasticizers and lignocellulosic fillers of renewable origin is proposed to improve the properties of these materials without compromising their high environmental potential. The first part of the thesis focuses on the reuse of various mango waste products (one of the most popular crops in the world), such as peel and kernel, to develop different materials with a high natural content. Studies in this section include the extraction of starch from mango kernels for the subsequent production of nanofibers by electrospinning, which have significant applications in the medical sector. Other studies propose the combination of polymeric matrices such as biopolypropylene and PLA, in combination with mango peel flour and mango kernel flour, respectively, through extrusion, reactive extrusion (REX), and injection processes. In the case of biopolypropylene, compatibilizing agents based on itaconic acid are also used to increase the adhesion between lignocellulosic particles from mango peel and the highly apolar polymer matrix. On the other hand, PLA formulations with mango kernel flour are supplemented with plasticizers such as triacetin and tributyrin to enhance the ductile properties of PLA. A fourth study focuses on the production of glycerol films with mango kernel flour, rich in starch, to observe how the particle size of the flour affects the film properties. Finally, the development of starch-rich thermoplastic materials is proposed using mango kernel flour in combination with different plasticizers such as glycerol, sorbitol, and urea. These starch-rich materials are processed by extrusion and injection and are completely biodegradable and of natural origin. The second and final part of the thesis is focused on the use of polylactic acid obtained from renewable sources in extrusion and injection processes. This biodegradable polyester has the main disadvantage of being very brittle. Therefore, different types of natural plasticizers have been used to increase the ductile properties of PLA. In the first study, PLA is combined with α-terpinyl acetate, a renewable plasticizer. In addition, ground tangerine peel is added as a natural filler to evaluate if this plasticizer can increase the ductility of PLA blends with lignocellulosic fillers, yielding very positive results. A second study proposes the combination of PLA with diethyl-L-tartrate, a plasticizer obtained from tartaric acid, found in grapes and tamarind, resulting in elongations of more than 300%. Finally, two more studies propose the combination of PLA with terpenoids, specifically geranyl and linalyl esters. In this regard, one of the works focuses on varying the proportion of linalyl acetate and geranyl acetate in the compositions, while the other study evaluates how the chain length of geranyl esters affects PLA plasticization. All the plasticizers used in this section offered very promising results, with elongations at break exceeding 200% in completely natural and biodegradable materials with significant applications in the food and packaging sectors., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Commercial Grade of P(3HB-co-3HHX) Final Properties Adjustment by the Modification of Cooling Conditions in the Injection Molding and Ageing Process

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Peydro, M. A.|||0000-0002-8503-1505
  • Sellés, M.A.|||0000-0002-0784-5757
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) is a polymer obtained bybacterial fermentation that emerges as an alternative to polymers ofpetrochemical origin. The complex crystallization kinetics that occurs over 15days after melting, known as ageing, limits its industrial application. Duringthe aging process, there is a change of the degree of crystallinity, which has ane¿ect on the chemical structure of the material. Additionally, changes in themechanical properties, colorimetry, and dimensional shrinkage are observed.Di¿erent material properties are observed depending on the coolingconditions employed. For the ageing process, two di¿erent conditions areconsidered: ageing at room temperature and annealing at high temperature(60 °C)., This research was a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762AI00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. This work was also funded with Aid for First Research Projects (PAID-06-22), the Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. I.-M. wants to thank FPU grant FPU19/01759 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF: Investing in Your Future. J.G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF: Investing in Your Future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The effects of processing parameters on mechanical properties of 3D-printed polyhydroxyalkanoates parts

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Peydro, M. A.|||0000-0002-8503-1505
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The crystallisation process of polyhydroxyalkanoates (PHA) polymers plays a key role on final properties of manufactured parts due to most PHA are highly sensitive to physical aging which leads to embrittlement. The secondary crystallisation associated with the aging process can be partially controlled by the cooling process during manufacturing or, even, by heat treatments such as annealing. A critical parameter in additive manufacturing is the difficulty to achieve good adhesion of the material to the printing bed. The bed temperature plays a key role on PHBH crystallisation, which leads to shrinkage having a negative effect on polymer-to-bed adhesion. In this work, a study of the effect of different processing parameters such as the printing temperature, the bed temperature, the cooling conditions, as well as raster direction on the final properties of PHBH 3D-printed parts is carried out., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/ 094. Wants to thank the Ministerio de Ciencia e Innovación and Universities for his FPU grant (FPU19/01759). Wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/ 185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding

  • Jordà-Reolid, María
  • Moreno-García, Virginia
  • Martínez-García, Asunción
  • Covas, José A.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this study, a new composite material is developed using a semi bio-based polypropylene (bioPP) and micronized argan shell (MAS) byproducts. To improve the interaction between the filler and the polymer matrix, a compatibilizer, PP-g-MA, is used. The samples are prepared using a co-rotating twin extruder followed by an injection molding process. The addition of the MAS filler improves the mechanical properties of the bioPP, as evidenced by an increase in tensile strength from 18.2 MPa to 20.8 MPa. The reinforcement is also observed in the thermomechanical properties, with an increased storage modulus. The thermal characterization and X-ray diffraction indicate that the addition of the filler leads to the formation of ¿ structure crystals in the polymer matrix. However, the addition of a lignocellulosic filler also leads to an increased affinity for water. As a result, the water uptake of the composites increases, although it remains relatively low even after 14 weeks. The water contact angle is also reduced. The color of the composites changes to a color similar to wood. Overall, this study demonstrates the potential of using MAS byproducts to improve their mechanical properties. However, the increased affinity with water should be taken into account in potential applications., This research was funded by [Aid for First Research Projects] grant number [PAID-06-22] and The APC was funded by [Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV)].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Allergic inflammation triggers dyslipidemia via IgG signalling

  • Fernández-Gallego, Nieves
  • Castillo-González, Raquel
  • Moreno-Serna, Lucía
  • García-Cívico, Antonio J
  • Sánchez-Martínez, Elisa
  • López-Sanz, Celia
  • Fontes, Ana Luiza
  • Pimentel, Lígia L
  • Gradillas, Ana
  • Obeso, David
  • Neuhaus, René
  • Ramírez-Huesca, Marta
  • Ruiz-Fernández, Ignacio
  • Nuñez-Borque, Emilio
  • Carrasco, Yolanda R
  • Ibáñez, Borja
  • Martín, Pilar
  • Blanco, Carlos
  • Barbas, Coral
  • Barber Hernández, Domingo
  • Rodríguez-Alcalá, Luis M
  • Villaseñor, Alma
  • Esteban, Vanesa
  • Sánchez-Madrid, Francisco
  • Jiménez-Saiz, Rodrigo
Allergic diseases begin early in life and are often chronic, thus creating an inflammatory environment that may precede or exacerbate other pathologies. In this regard, allergy has been associated to metabolic disorders and with a higher risk of cardiovascular disease, but the underlying mechanisms remain incompletely understood., R.J.-­ S.´s laboratory has received support from the Severo Ochoa Program (AEI/SEV-­2017-­0712; Spain), FSE/FEDER through the Instituto de Salud Carlos III (ISCIII; CP20/00043; PI22/00236; Spain), The Nutricia Research Foundation (NRF-2021-­13; The Netherlands), New Frontiers in Research Fund (NFRFE-­ 2019-­ 00083; Canada) and SEAIC (BECA20A9; Spain). F.S.-­ M. reports grants from Ministerio de Ciencia e Innovación (MICIN; PID2020-­ 120412RB-­ I00; Spain), and Comunidad de Madrid (INTEGRAMUNE, P2022/BMD7209; Spain). V.E. obtained support from the ISCIII (PI21/00158; Spain). N.F.-­ G. and I.R.-­ F. received a Formación de Profesorado Universitario grant (FPU16/03953 and FPU20/05176, respectively) from Ministerio de Universidades (Spain). N.F.-­ G. and L.M.-­ S. are supported by the INVESTIGO Program of the Comunidad de Madrid and Ministerio de Trabajo y Economía Social, Servicio Público de Empleo (SEPE), respectively, which is funded by “Plan de Recuperación, Transformación y Resiliencia” and “NextGenerationEU” of the European Union (09-­ PIN1-­ 00015.6/2022 and 2022-­ C23.I01.P03.S0020-­ 0000031). R.C.-­ G. is supported by Ayudas para con- tratos Juan de la Cierva-­ formación 2021 (FJC2021-­ 047282-­ I) from MICIN (Spain). C.L.-­ S. and E.N.-­ B. are supported by a Río Hortega (CM23/0019) and a Sara Borrell grant (CD23/00125), respectively, from ISCIII. P.M.is supported by MICIN-­ ISCIII-­ Fondo de Investigación Sanitaria (PI22/01759; PMPTA22/00090-BIOCARDIOTOX) and Comunidad de Madrid (P2022/BMD-­ 7209-INTEGRAMUNE-­CM; Spain) CNIC is a Severo Ochoa Center of Excellence (grant CEX2020-­ 001041-­ Sfunded by MICIN/ AEI/10.13039/501100011033)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cytomegalovirus reactivation is associated with lower rates of hepatocellular carcinoma recurrence after liver transplantation

  • Aguilera, Victoria
  • Romero Moreno, Sarai
  • Conde, Isabel
  • Rubín, Angel
  • Carvalho-Gomes, Angela
  • Romero, Mario
  • Zamora-Olaya, Javier
  • Gómez-Bravo, Miguel Angel
  • Fuentes-Valenzuela, Esteban
  • Dopazo, Cristina
  • Bilbao, Nikita
  • González, Antonio
  • Sánchez-Martínez, Ana
  • Pascual, Sonia
  • Rivera-Esteban, Jesús
  • Herrero, José Ignacio
  • Lorente, Sara
  • Cuadrado-Lavín, Antonio
  • Nogueras, Flor
  • Martínez-Arenas, Laura
  • González-Grande, Rocío
  • Berenguer, Marina
  • Rodriguez-Perálvarez, Manuel
In patients with hepatocellular carcinoma (HCC), undergoing liver transplantation (LT), cytomegalovirus reactivation (CMVr) may modulate the immune system to prevent tumor recurrence. In this multicenter retrospective study (2010–2015) involving 15 institutions, we assessed the effect of early CMVr in tumor recurrence rates among 771-LT HCC patients with tacrolimus-based immunosuppression (88% men, mean age 58 years). CMV prophylaxis was implemented for 19.7% of patients, while the rest were managed with preemptive therapy. The Milan criteria were met by 88% of patients. Microvascular invasion was present in 12.7% of explanted livers. The serum AFP level before transplantation was 5.1 (3–15) ng/mL. After a median follow-up of 7.4 years, 101 patients (13%) experienced HCC recurrence. CMVr occurred in 235 patients (30.5%) at a median of 41.5 days post-LT and 42 patients (5.6%) had CMV disease. Cumulative exposure to tacrolimus within the first 3 months after LT was similar among patients with and without CMVr. In a multivariate Cox regression analysis, factors associated with an increased rate of HCC recurrence included microvascular invasion [HR:2.82, CI95%:1.55–5.14; p 0.0001], donation after circulatory determination of death [HR:4.43,CI95%:1.52–12.9; p 0.006) and diameter of the main nodule at explant [HR:1.04, CI95%:1.02–1.06; p < 0.001]. Meanwhile CMVr [HR:0.46, CI95%:0.23–0.93, p 0.031] and MELD [HR:0.93, CI95%:0.87–0.99; p0.017] exhibited protective effects. In conclusion, early CMVr may protect against HCC recurrence. The underlying immune mechanisms warrant further investigation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Inhibition of Neuronal Apoptosis and Axonal Regression Ameliorates Sympathetic Atrophy and Hemodynamic Alterations in Portal Hypertensive Rats

  • Ezkurdia Garmendia, Nahia
  • Raurell, Imma|||0000-0003-4477-7367
  • Rodríguez, Sarai
  • González, Antonio|||0000-0002-2137-5835
  • Esteban, Rafael|||0000-0001-5280-392X
  • Genescà Ferrer, Joan|||0000-0002-0831-8422
  • Martell, María|||0000-0002-0935-0029
A neuronal pathway participates in the development of portal hypertension: blockade of afferent sensory nerves in portal vein ligated (PVL) rats simultaneously prevents brain cardiovascular regularory nuclei activation, neuromodulator overexpression in superior mesenteric ganglia, sympathetic atrophy of mesenteric innervation and hemodynamic alterations. Here we investigated in PVL rats alterations in neuromodulators and signaling pathways leading to axonal regression or apoptosis in the superior mesenteric ganglia and tested the effects of the stimulation of neuronal proliferation/survival by using a tyrosine kinase receptor A agonist, gambogic amide. The neuronal pathway was confirmed by an increased neuronal afferent activity at the vagal nodose ganglia and the presence of semaphorin3A in sympathetic pre-ganglionic neurons at the intermediolateral nucleus of the spinal cord of PVL rats. Expression of the active form of tyrosine kinase receptor A (phosphorylated), leading to proliferation and survival signaling, showed a significant reduction in PVL comparing to sham rats. In contrast, the apoptotic and axonal retraction pathways were stimulated in PVL, demonstrated by a significant overexpression of semaphorin 3A and its receptor neuropilin1, together with increases of cleaved caspase7, inactive poly(ADP-ribose) polymerase and Rho kinase expression. Finally, the administration of gambogic amide in PVL rats showed an amelioration of hemodynamic alterations and sympathetic atrophy, through the activation of survival pathways together with the inhibition of apoptotic cascades and Rho kinase mediated axonal regression. The adrenergic alteration and sympathetic atrophy in mesenteric vessels during portal hypertension is caused by alterations on neuromodulation leading to post-ganglionic sympathetic regression and apoptosis and contributing to splanchnic vasodilation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Nitric Oxide-Donating Statin Decreases Portal Pressure with a Better Toxicity Profile than Conventional Statins in Cirrhotic Rats

  • Rodríguez, Sarai
  • Raurell, Imma|||0000-0003-4477-7367
  • Torres-Arauz, Manuel
  • García Lezana, Teresa
  • Genescà Ferrer, Joan|||0000-0002-0831-8422
  • Martell, María|||0000-0002-0935-0029
Statins present many beneficial effects in chronic liver disease, but concerns about safety exist. We evaluated the hepatic effects of a nitric oxide-releasing atorvastatin (NCX 6560) compared to conventional statins. Simvastatin, atorvastatin and NCX 6560 were evaluated in four-week bile duct-ligated rats (BDL) simulating decompensated cirrhosis and in thirteen-week carbon tetrachloride (CCl) intoxicated rats, a model of early cirrhosis. In the BDL model, simvastatin treated rats showed high mortality and the remaining animals presented muscular and hepatic toxicity. At equivalent doses, NCX 6560 eliminated hepatic toxicity and reduced muscular toxicity (60-74%) caused by atorvastatin in the more advanced BDL model; toxicity was minimal in the CCl model. Atorvastatin and NCX 6560 similarly reduced portal pressure without changing systemic hemodynamics in both models. Atorvastatin and NCX 6560 caused a mild decrease in liver fibrosis and inflammation and a significant increase in intrahepatic cyclic guanosine monophosphate. NCX 6560 induced a higher intrahepatic vasoprotective profile (activated endothelial nitric oxide synthase and decreased platelet/endothelial cell adhesion molecule-1), especially in the CCl model, suggesting a higher benefit in early cirrhosis. In conclusion, NCX 6560 improves the liver profile and portal hypertension of cirrhotic rats similarly to conventional statins, but with a much better safety profile.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

CD69 expression on regulatory T cells protects from immune damage after myocardial infarction

  • Blanco-Domínguez, Rafael|||0000-0003-2448-8699
  • Fuente, Hortensia de la
  • Rodríguez, Cristina|||0000-0002-6472-5647
  • Martín-Aguado, Laura
  • Sánchez-Díaz, Raquel
  • Jiménez-Alejandre, Rosa
  • Rodríguez-Arabaolaza, Iker
  • Curtabbi, Andrea
  • García-Guimaraes, Marcos M.
  • Vera, Alberto
  • Rivero, Fernando|||0000-0002-3676-0277
  • Cuesta, Javier
  • Jiménez-Borreguero, Luis J.
  • Cecconi, Alberto|||0000-0002-0031-9914
  • Duran Cambra, Albert|||0000-0002-5692-6844
  • Tauron, Manel|||0000-0002-5864-519X
  • Alonso Nieto, Judith|||0000-0003-0537-0417
  • Bueno, Héctor|||0000-0003-0277-7596
  • Villalba-Orero, María|||0000-0002-7680-3980
  • Enríquez, Jose Antonio
  • Robson, Simon C.|||0000-0001-6374-0194
  • Alfonso, Fernando|||0000-0002-7480-2511
  • Sánchez-Madrid, Francisco|||0000-0001-5303-0762
  • Martínez-González, José|||0000-0002-3894-7166
  • Martin, Pilar|||0000-0002-2392-1764
Increasing evidence has pointed to the important function of T cells in controlling immune homeostasis and pathogenesis after myocardial infarction (MI), although the underlying molecular mechanisms remain elusive. In this study, a broad analysis of immune markers in 283 patients revealed significant CD69 overexpression on Tregs after MI. Our results in mice showed that CD69 expression on Tregs increased survival after left anterior descending (LAD) coronary artery ligation. Cd69 -/- mice developed strong IL-17 + γδT cell responses after ischemia that increased myocardial inflammation and, consequently, worsened cardiac function. CD69 + Tregs, by induction of AhR-dependent CD39 ectonucleotidase activity, induced apoptosis and decreased IL-17A production in γδT cells. Adoptive transfer of CD69 + Tregs into Cd69 -/- mice after LAD ligation reduced IL-17 + γδT cell recruitment, thus increasing survival. Consistently, clinical data from 2 independent cohorts of patients indicated that increased CD69 expression in peripheral blood cells after acute MI was associated with a lower risk of rehospitalization for heart failure (HF) after 2.5 years of follow-up. This result remained significant after adjustment for age, sex, and traditional cardiac damage biomarkers. Our data highlight CD69 expression on Tregs as a potential prognostic factor and a therapeutic option to prevent HF after MI.