Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembled line network in BiFeO3 thin films

  • Colson, Baptiste
  • Fuentes, Víctor
  • Konstantinović, Z.
  • Colson,D.
  • Forget, A.
  • Lazarević, Nenad
  • Šćepanović, M.
  • Popović, Z. V.
  • Frontera, Carlos
  • Balcells, Lluis
  • Martínez Perea, Benjamín
  • Pomar, Alberto
In this work we report on the controlled fabrication of a self-assembled line network in highly epitaxial BiFeO3 thin films on top of LaAlO3 in the kinetically limited grown region by RF sputtering. As previously shown in the case of manganite thin films, the remarkable degree of ordering is achieved using vicinal substrates with well-defined step-terrace morphology. Nanostructured BiFeO3 thin films show mixed-phase morphology. Besides typical formation following (100) and (010) axes, some mixed phase nanodomains are detected also in-between the regular line network. These particular microstructures open a playground for future applications in multiferroic nanomaterials., This work has received funding from the European Union’s Horizon 2020 research and innovation under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). A.P., V. F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments. E. P.-M. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496), and project MAT2015-71664 and SPINCURIOX (RTI2018-099960-B-I00). N. L., M. S., Z. K. and Z.V.P. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No III45018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Chemical Solution Deposition of Functional Double Perovskite Epitaxial Thin Films

  • Wang, Hailin
  • Frontera, Carlos
  • Herrero Martín, Javier
  • Pomar, Alberto
  • Pere Roura,[
  • Martínez Perea, Benjamín
  • Mestres, Narcís
Double perovskite structure (A2BB′O6) oxides exhibit a breadth of multifunctional properties with a huge potential range of applications in fields as diverse as spintronics, magneto‐optic devices, or catalysis, and most of these applications require the use of thin films and heterostructures. Chemical solution deposition techniques are appearing as a very promising methodology to achieve epitaxial oxide thin films combining high performance with high throughput and low cost. In addition, the physical properties of these materials are strongly dependent on the ordered arrangement of cations in the double perovskite structure. Thus, promoting spontaneous cationic ordering has become a relevant issue. In this work, our recent achievements by using polymer‐assisted deposition (PAD) of environmentally friendly, water‐based solutions for the growth of epitaxial ferromagnetic insulating double perovskite La2CoMnO6 and La2NiMnO6 thin films on SrTiO3 and LaAlO3 single‐crystal substrates are presented. It is shown that the particular crystallization and growth process conditions of PAD (very slow rate, close to thermodynamic equilibrium conditions) promote high crystallinity and quality of the films, as well as favors spontaneous B‐site cationic ordering., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (SEV‐2015–04969), SUMATE (RTI2018‐095853‐B‐C21), and SPINCURIOX (RTI2018‐099960‐B‐I00) projects co‐financed by the European Regional Development Fund. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship. The authors thank the ALBA Synchrotron (Spain) for the provision of beamtime. The authors also thank Dr. B. Bozzo and F. J. Campos for their technical support during magnetic and X‐ray diffraction measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resistive switching in Strontium iridate based thin films

  • Fuentes, Víctor
  • Vasić, Borislav
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Balcells, Lluis
  • Pomar, Alberto
We report on the local electrical properties, measured by conductive atomic force microscopy, of the Iridate-based Srn+1IrnO3n+1 family of thin films, in particular by comparing the n = 1, Sr2IrO4, and the n = ∞, SrIrO3, phases. We analyze the different resistive switching behavior as a function of the pristine electronic properties of the films. We will show that, for films exhibiting insulating behavior, i.e., films of the n = 1 phase or films below 3 nm of thickness for the n = ∞ phase, hysteretic I–V curves with a sharp transition into a low resistance state (LRS), i.e. an abrupt increase of the current intensity, is detected above a well-defined threshold voltage. This suggests a resistive switching behavior associated to the jump between two resistance states that may be correlated to the activation energy, Δ, obtained by fitting the temperature dependence of the resistivity to a thermal activated Arrhenius law, ρ (T) ~ ρ0exp(−Δ/kBT). On the other hand, thicker samples of the n = ∞ phase exhibit a semimetallic character and I–V curves show progressive changes of the local resistance without a clearly defined threshold voltage. Kelvin Probe Force Microscopy based measurements confirmed that, concomitantly to the resistive switching, an evolution of the electronic states at the surface takes place that may be associated to the migration of oxygen vacancies promoted by the electrical fields under the AFM tip., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R (HETEROCS) and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. B.V. and Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No. OI171005 and III45018). A.P., V.F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature dependence of spin pumping and inverse spin Hall effect in permalloy/Pt bilayers

  • Martin Rio, Sergi
  • Pomar, Alberto
  • Balcells, Lluis
  • Bozzo, Bernat
  • Frontera, Carlos
  • Martínez Perea, Benjamín
The temperature dependence of the spin pumping process in Fe80Ni20 (Py)/Pt bilayers is analyzed for different Pt capping layer thickness. Samples have been grown by means of dc magnetron sputtering, at room temperature, on top of Si substrates. In order to get an optimized interface between the Py and the Pt layers, the Pt capping layers were deposited In situ. The values of the damping constant, α, obtained for the Py alone samples, around 0.007 at RT, make evident the good quality of the samples. The increase of α due to spin pumping into the Pt layer is clearly appreciated; α values in Py/Pt bilayers are twice the value in Py alone. Spin pumping is confirmed by direct measurements of the inverse spin Hall effect (ISHE) voltage signal (VISHE) measured across the samples. To separate ISHE and spin rectification contributions to VISHE the line shape analysis method has been used and the conditions for its applicability thoroughly discussed. VISHE increases almost linearly on lowering temperature for all the frequencies investigated and smoothly increases as frequency decreases showing roughly a linear dependence with the inverse of the frequency. The Pt layer thickness dependence of α and VISHE suggest a low interfacial spin mixing conductance and high spin memory loss., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R and RTI2018-099960-B-I00 and funding from the EU (European Union) Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of Nickel Oxide Nanocuboids in Ferromagnetic La2Ni1−xMn1+xO6

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Z.
  • Frontera, Carlos
  • Fuentes, Víctor
  • Pomar, Alberto
  • Balcells, Lluis
  • Martínez Perea, Benjamín
The control of the spontaneous formation of nanostructures at the surface of thin films is of strong interest in many different fields, from catalysts to microelectronics, because surface and interfacial properties may be substantially enhanced. Here, we analyze the formation of nickel oxide nanocuboids on top of La2Ni1−xMn1+xO6 double perovskite ferromagnetic thin films, epitaxially grown on SrTiO3 (001) substrates by radio-frequency (RF) magnetron sputtering. We show that, by annealing the films at high temperature under high oxygen partial pressure, the spontaneous segregation of nanocuboids is enhanced. The evolution of the structural and magnetic properties of the films is studied as a function of the annealing treatments at different temperatures. It is shown that the formation of NiOx nanocuboids leads to a nanostructured film surface with regions of locally different electrical transport characteristics., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (CEX2019-000917-S) and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (III45018). This work has been performed in the framework of the PhD program of the Universitat Autonoma de Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Finding the Limits of Magnetic Hyperthermia on Core-Shell Nanoparticles Fabricated by Physical Vapor Methods

  • Martínez Boubeta, Carlos
  • Simeonidis, Konstantinos
  • Oró, Judith
  • Makridis, Antonios
  • Serantes, David
  • Balcells, Lluis
Magnetic nanoparticles can generate heat when exposed to an alternating magnetic field. Their heating efficacy is governed by their magnetic properties that are in turn determined by their composition, size and morphology. Thus far, iron oxides (e.g., magnetite, Fe3O4) have been the most popular materials in use, though recently bimagnetic core-shell structures are gaining ground. Herein we present a study on the effect of particle morphology on heating efficiency. More specifically, we use zero waste impact methods for the synthesis of metal/metal oxide Fe/Fe3O4 nanoparticles in both spherical and cubic shapes, which present an interesting venue for understanding how spin coupling across interfaces and also finite size effects may influence the magnetic response. We show that these particles can generate sufficient heat (hundreds of watts per gram) to drive hyperthermia applications, whereas faceted nanoparticles demonstrate superior heating capabilities than spherical nanoparticles of similar size., We thank the CNRS-PROMES laboratory, UPR 8521, belonging to the French National Centre for Scientific Research (CNRS) for providing access to its installations, the support of its scientific and technical staff (N. Boullet, E. Guillot, A. Badziaka), and the financial support of the SFERA-III project (Grant Agreement No 823802). Spanish Ministry of Science, Innovation and Universities through grant (CEX2019-000917-S) in the framework of the Spanish Severo Ochoa Centre of Excellence Program and RTI2018-099960-B-I00 (SPINCURIOX). This research is cofinanced by Greece and the European Union (European Social Fund-ESF) through the Operational Programme “Human Resources Development, Education and Lifelong Learning” in the context of the project “Reinforcement of Postdoctoral Researchers—2nd Cycle” (MIS-5033021), implemented by the State Scholarships Foundation (IKΥ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fractal polymer islands on top of ferromagnetic La2Ni0.6Mn1.4O6 thin films

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Zorica
  • Balcells, Lluis
  • Scepanovic, Maja J.
  • Valencia, Sergio
  • Pannunzio-Miner, Elisa
  • Frontera, Carlos
  • Pomar, Alberto
  • Martínez Perea, Benjamín
The formation of the crystalline organic polymer (OP) islands on top of double perovskite ferromagnetic La2Ni1–xMn1+xO6 (x = 0.4) thin films by RF sputtering is reported. The presence of randomly ramified organic polymer islands for film grown on top of SrTiO3 and LaAlO3 substrates suggest the fractal growth. The stability of fractal OP islands is tested by an in-situ oxygen annealing process as function of the annealing temperature. The evolution of the fractal structure of OP islands is followed in parallel with the evolution of structural and magnetic properties of LNMO thin films. The modification of the manganese valence state due to the presence of organic polymer fractals is studied by means of X-ray photoemission microscopy., This work has received funding from the European Union's Horizon 2020 research and innovation under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). A.P. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments. E. P.-M. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S), and project MAT2015-71664 and SPINCURIOX (RTI2018-099960-B-I00). M. Š. and Z. K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No III45018). This work has been performed in the framework of the PhD program of the Universitat Autonoma de Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How size, shape and assembly of magnetic nanoparticles give rise to different hyperthermia scenarios

  • Gavilán, Helena
  • Simeonidis, Konstantinos
  • Myrovali, Eirini
  • Mazarío, Eva
  • Chubykalo-Fesenko, Oksana
  • Chantrell, Roy W.
  • Balcells, Lluis
  • Angelakeris, Mavroidis
  • Morales, María Del Puerto
  • Serantes, David
The use of magnetic nanoparticles (MNPs) to locally increase the temperature at the nanoscale under the remote application of alternating magnetic fields (magnetic particle hyperthermia, MHT) has become an important subject of nanomedicine multidisciplinary research, focusing among other topics on the optimization of the heating performance of MNPs and their assemblies under the effect of the magnetic field. We report experimental data of heat released by MNPs using a wide range of anisometric shapes and their assemblies in different media. We outline a basic theoretical investigation, which assists the interpretation of the experimental data, including the effect of the size, shape and assembly of MNPs on the MNPs’ hysteresis loops and the maximum heat delivered. We report heat release data of anisometric MNPs, including nanodisks, spindles (elongated nanoparticles) and nanocubes, analysing, for a given shape, the size dependence. We study the MNPs either acting as individuals or assembled through a magnetic-field-assisted method. Thus, the physical geometrical arrangement of these anisometric particles, the magnetization switching and the heat release (by means of the determination of the specific adsorption rate, SAR values) under the application of AC fields have been analysed and compared in aqueous suspensions and after immobilization in agar matrix mimicking the tumour environment. The different nano-systems were analysed when dispersed at random or in assembled configurations. We report a systematic fall in the SAR for all anisometric MNPs randomly embedded in a viscous environment. However, certain anisometric shapes will have a less marked, an almost total preservation or even an increase in SAR when embedded in a viscous environment with certain orientation, in contrast to the measurements in water solution. Discrepancies between theoretical and experimental values reflect the complexity of the systems due to the interplay of different factors such as size, shape and nanoparticle assembly due to magnetic interactions. We demonstrate that magnetic assembly holds great potential for producing materials with high functional and structural diversity, as we transform our nanoscale building blocks (anisometric MNPs) into a material displaying enhanced SAR properties., K. S. acknowledges Stavros Niarchos Foundation for financial support. SQUID measurements received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by CSIC-ICMAB in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This work was also partially supported by grants from the MINEICO (MAT2017-88148R to M. P. Morales; Severo Ochoa Program (CEX2019-000917-S), RTI2018-099960-B-I00 to Ll. Balcells), the Spanish Agencia Estatal de Investigación (PID2019-109514RJ-100 to D. Serantes) and from the EU, H2020 program through HOTZYME-829162 project. E. M. acknowledges financial support from the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with Universidad Autónoma de Madrid in the line of action encouraging youth research doctors, in the context of the V PRICIT (Regional Programme of Research and Technological Innovation, SI1-PJI-2019-00366)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppression of spin rectification effects in spin pumping experiments

  • Martin Rio, Sergi
  • Frontera, Carlos
  • Pomar, Alberto
  • Balcells, Lluis
  • Martínez Perea, Benjamín
Spin pumping (SP) is a well-established method to generate pure spin currents allowing efficient spin injection into metals and semiconductors avoiding the problem of impedance mismatch. However, to disentangle pure spin currents from parasitic effects due to spin rectification effects (SRE) is a difficult task that is seriously hampering further developments. Here we propose a simple method that allows suppressing SRE contribution to inverse spin Hall effect (ISHE) voltage signal avoiding long and tedious angle-dependent measurements. We show an experimental study in the well-known Py/Pt system by using a coplanar waveguide (CPW). Results obtained demonstrate that the sign and size of the measured transverse voltage signal depends on the width of the sample along the CPW active line. A progressive reduction of this width evidences that SRE contribution to the measured transverse voltage signal becomes negligibly small for sample width below 200 μm. A numerical solution of the Maxwell equations in the CPW-sample setup, by using the Landau-Lifshitz equation with the Gilbert damping term (LLG) as the constitutive equation of the media, and with the proper set of boundary conditions, confirms the obtained experimental results., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (CEX2019-000917-S), RTI2018-099960-B-I00 and funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. CF thanks Prof. M. Kostylev for fruitful communications., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin to charge conversion in chemically deposited epitaxial La0.9MnO3 thin films capped with Pt

  • Martin Rio, Sergi
  • Pomar, Alberto
  • Frontera, Carlos
  • Wang, Hailin
  • Manzorro, Ramón
  • Magén, César
  • Balcells, Lluis
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Spin to charge conversion process in a broad range of temperatures is studied in La0.92MnO3/Pt bilayers prepared by polymer-assisted deposition (PAD). It is shown that an excellent LMO/Pt interface can be obtained in spite of using ex situ deposition of the Pt layer. The values obtained for the effective spin-mixing conductance, g↑↓eff = 0.76 × 1015 cm−2, suggest that significant spin transport across the LMO/Pt interface could be achieved. Spin pumping experiments generate a transversal voltage signal VISHE, due to spin to charge conversion via inverse spin Hall effect, that has been detected down to about 100 K with values of the spin-Hall angle, θSH, of about 2.5%, slightly decreasing on reducing temperature in the analyzed temperature range. These results indicate that LMO is a promising perovskite building block for all-oxide multifunctional high-frequency spintronics devices and that PAD technique provides oxide epitaxial thin films of good quality adequate for spintronic applications., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (CEX2019-000917-S), and SPINCURIOX (RTI2018-099960-BI00) and AMONANO (PID2020-112914RB-I00) projects co-financed by the European Regional Development Funds. AMONANO also received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 823717-ESTEEM3. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the Growth Process of Double Perovskite Pr2−δNi1−xMn1+xO6−y Epitaxial Thin Films by RF Sputtering

  • Bernal Salamanca, Mónica E.
  • Balcells, Lluis
  • Konstantinović, Zorica
  • Pomar, Alberto
  • Martínez, Benjamín
  • Frontera, Carlos
Epitaxial thin films of Pr2-δNi1-xMn1+xO6-y (PNMO) double perovskite were grown on (001)-oriented SrTiO3 substrates by RF magnetron sputtering. The influence of the growth parameters (oxygen pressure, substrate temperature, and annealing treatments) on the structural, magnetic and transport properties, and stoichiometry of the films was thoroughly investigated. It is found that high-quality epitaxial, insulating, and ferromagnetic PNMO thin films can only be obtained in a narrow deposition parameter window. It is shown that a careful selection of the growth conditions allows for obtaining a high degree of Ni/Mn cation ordering, which is reflected in the values of the Curie temperature, TC, and saturation magnetization, MS, which are very close to those of bulk material., This research was funded by Spanish Ministry of Science and Innovation through Severo Ochoa (grant number: CEX2019-000917-S) and SPINCURIOX (grant number: RTI2018-099960-BI00) projects cofinanced by the European Regional Development Funds., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin to charge conversion in chemically deposited epitaxial La0.9MnO3 thin films capped with Pt

  • Martin-Rio, Sergi
  • Pomar, Alberto
  • Frontera, Carlos
  • Wang, Hailin
  • Manzorro, Ramon
  • Magen, Cesar
  • Balcells, Lluis
  • Mestres, Narcis
  • Martinez, Benjamin
Spin to charge conversion process in a broad range of temperatures is studied in La0.92MnO3/Pt bilayers prepared by polymer-assisted deposition (PAD). It is shown that an excellent LMO/Pt interface can be obtained in spite of using ex situ deposition of the Pt layer. The values obtained for the effective spin-mixing conductance, g up arrow down arrow(eff) = 0.76 x 10(15) cm(-2), suggest that significant spin transport across the LMO/Pt interface could be achieved. Spin pumping experiments generate a transversal voltage signal V-ISHE, due to spin to charge conversion via inverse spin Hall effect, that has been detected down to about 100 K with values of the spin-Hall angle, theta(SH), of about 2.5%, slightly decreasing on reducing temperature in the analyzed temperature range. These results indicate that LMO is a promising perovskite building block for all-oxide multifunctional high-frequency spintronics devices and that PAD technique provides oxide epitaxial thin films of good quality adequate for spintronic applications.