Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Responsive molecules for organic neuromorphic devices: Harnessing memory diversification

  • Chen, Yusheng
  • Han, Bin
  • Gobbi, Marco
  • Hou, Lili
  • Samorì, Paolo
In the brain, both the recording and decaying of memory information following external stimulus spikes are fundamental learning rules that determine human behaviors. The former is essential to acquire new knowledge and update the database, while the latter filters noise and autorefresh cache data to reduce energy consumption. To execute these functions, the brain relies on different neuromorphic transmitters possessing various memory kinetics, which can be classified as nonvolatile and volatile memory. Inspired by the human brain, nonvolatile and volatile memory electronic devices have been employed to realize artificial neural networks and spiking neural networks, respectively, which have emerged as essential tools in machine learning. Molecular switches, capable of responding to electrical, optical, electrochemical, and magnetic stimuli, display a disruptive potential for emulating information storage in memory devices. This Review highlights recent developments on responsive molecules, their interfacing with low-dimensional nanostructures and nanomaterials, and their integration into electronic devices. By capitalizing on these concepts, a unique account of neurotransmitter-transfer electronic devices based on responsive molecules with ad hoc memory kinetics is provided. Finally, future directions, challenges, and opportunities are discussed on the use of these devices to engineer more complex logic operations and computing functions at the hardware level., The authors acknowledge funding from the European Commission through the ERC project SUPRA2DMAT (GA-833707) and the HORIZON-CL4-2023-DIGITAL-EMERGING-01-CNECT project 2D-PRINTABLE (GA-101135196) as well as National Natural Science Foundation of China (12274320), the FLAG-ERA project MULTISPIN funded by the Agence Nationale de la Recherche (ANR-21-GRF1-0003-01) and by the Spanish MCIN/AEI with grant number PCI2021-122038-2A, the Agence Nationale de la Recherche through the Interdisciplinary Thematic Institute SysChem via the IdEx Unistra (ANR-10-IDEX-0002) within the program Investissement d'Avenir, the Foundation Jean-Marie Lehn and the Institut Universitaire de France (IUF). M.G. acknowledges support from the project PID2021-128004NB-C21, funded by Spanish MCIN/AEI/10.13039/501100011033 and by ERDF/EU, and from the “Ramón y Cajal” Programme by the Spanish MCIN/AEI and European Union NextGenerationEU/PRTR (Grant No. RYC2021-031705-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantifying the Influence of Nanosheet Aspect Ratio on Network Morphology and Junction Resistance in Solution-Processed Nanosheet Networks

  • Caffrey, Eoin
  • Munuera Fernández, José María
  • Gabbett, Cian
  • Doolan, Luke
  • Neilson, Joseph
  • Wells, Rebekah A
  • McCrystall, Mark
  • McNamara, Alexandra
  • Carey, Tian
  • Gerlei, Martin
  • Seifert, Paul
  • Duesberg, Georg S
  • Coleman, Jonathan N
Optimizing solution-processed nanosheet networks for electronic applications requires understanding the relationship between nanosheet dimensions, network morphology, and electrical properties. Here, we fabricate graphene nanosheets with both low- and high-aspect-ratios using liquid-phase exfoliation (LPE) and electrochemical exfoliation (EE), respectively. Spray-coated networks of both nanosheet types display distinct morphological and electrical properties. High-resolution 3D imaging shows that low-aspect-ratio LPE nanosheet networks display a disordered, porous structure with point-like junctions. Conversely, high-aspect-ratio EE graphene forms low-porosity networks with highly aligned nanosheets with large-area conformal junctions. Electrical measurements demonstrate that EE networks achieve lower resistivity and reduced percolation thicknesses due to reduced junction resistances and improved nanosheet alignment. We propose a theoretical model linking nanosheet bending rigidity, aspect ratio, and junction formation, highlighting the critical role of nanosheet flexibility in enabling conformal junctions. Furthermore, by size-selecting both nanosheet types, we measure the dependence of network resistivity on nanosheet thickness. LPE networks show increasing resistivity with thickness, whereas EE networks exhibit decreasing resistivity. We develop a simple model linking these behaviors to point-like and planar junctions respectively and quantify the size-dependence of both nanosheet and junction resistance for both cases. Unexpectedly, data analysis using this model predicts the EE nanosheets to be more conductive than the LPE ones, a fact confirmed by THz spectroscopy. This study establishes the importance of nanosheet aspect ratio and flexibility in governing network morphology and electrical performance. Our findings provide key insights for developing high-performance, solution-processed 2D material networks for future electronic devices., We acknowledge the European Union the Horizon Europe project 2D-PRINTABLE (GA-101135196) and Taighde Éireann─Research Ireland under Grant numbers RI-23/FFP-A/12254 and GOIPG/2020/1051. J.M.M. thanks the Spanish Government’s Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union’s Next Generation funds. T.C. acknowledges funding from a Marie Skłodowska-Curie Individual Fellowship “MOVE” (grant number 101030735, project number 211395, and award number 16883). J.N. acknowledges funding from ADMIRE Marie Skłodowska-Curie COFUND Postdoctoral Fellowship “SLAM-2D” (grant number 12/RC/2278_P2). We have also received support from the Science Foundation Ireland (SFI) funded centre AMBER (SFI/12/RC/2278) and availed of the facilities of the SFI-funded advanced microscopy laboratory (AML), additive research laboratory (ARL) and iCRAG laboratories., Peer reviewed