Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 50
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards Stable Free Lead Mixed Halide Perovskite Thin Films on FTO-Coated Glass Substrate

  • Doumbia, Youssouf
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] All-inorganic cesium (Cs) lead perovskites have better thermal and chemical stability than organic-inorganic hybrids. They therefore represent a hope for stability and increased performance of perovskites as absorber layers in photovoltaic solar cells. In the present work, we have deposited different layers on FTO-coated glass substrates using the one-step spin-coating method. The results of the lead substitution are presented and critically discussed. The X-ray diffraction (XRD) results show four peaks for all three samples. The main peaks of the different films are located at the 2? angles of 26.45 & DEG; and 51.50 & DEG; for the Muller indices (220) and (242), respectively. These two main peaks indicate that the prepared thin films all have two preferred crystallographic orientations. Beyond these two main peaks, we have two other smaller peaks at 2? of 33.67 & DEG; and 37.70 & DEG; corresponding to the Muller indices of (210) and (211), respectively. The smoother the surface of the thin films, the more light they reflect, resulting in poor light absorption by the films. It is therefore important to obtain a surface image of the prepared films, as the larger the surface image, the better the film. With this in mind, we carried out a scanning electron microscope (SEM) analysis, which gave us the surface images. Figure 3 shows the SEM images of thin CsPb1-xSnxI1.5Br1.5 layers (x = 0, 0.5, and 1) grown on FTO-coated glass substrate with different [Pb]/[Sn] ratios. As can be seen from the figure, the effect of the [Pb]/[Sn] ratio is visible in the surface images of the different thin films. The smallest grain size is that of the unsubstituted CsPbI1.5Br1.5, while the largest grain size corresponds to the partially Pb-substituted layer (CsPb0.5Sn0.5I1.5Br1.5). The fully Pb-substituted layer (CsSnI1.5Br1.5) has an intermediate grain size. The surface images of the films show that the surfaces are well coated with grain sizes that vary greatly depending on the layer. The best grain size is that of the thin film with partial lead substitution (CsPb0.5Sn0.5I1.5Br1.5). Regarding the UV-visible absorption of the different films, we can say that the films absorb the maximum amount of light in the wavelength range of 350-550 nm. Above 550 nm, the absorption coefficients drop significantly. The absorption coefficients of the tin-free (Sn) layer remain higher than the coefficients of the other layers throughout the UV-visible spectrum. The degradation study revealed that the Sn-free layer retains good light absorption compared to the other layers after 4 weeks of exposure to the ambient environment. The crystal structure of all the layers shows good resistance to the elements during the 4 weeks, as shown by the renewed XRD results after the 4 weeks of exposure., Author Youssouf Doumbia acknowledges his grant from Erasmus+ KA 107. The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). The Postdoctoral contract Margarita Salas financed with the union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/ and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of the tiger-nut milk co-product on fibre-enriched bread processing and storage: crumb structure-moisture-texture relationships

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Alava, Cecibel
  • Carrascosa, Conrado
[EN] The effect of including tiger-nut milk co-product on the bread-making process was studied. The impact of three wheat flour substitution co-product levels (5%, 10% and 20%) was tested by comparing to a control (pure wheat) as regards fermentation kinetics and baking phase, as well as their implications on the physicochemical features of breads (crumb internal structure, moisture and texture distribution) just after processing and during storage. The dough fermentation kinetics showed significant differences: reducing maximum height at 60 min and maximum growth rate with an increasing co-product concentration. However, water retention in baking was the same for them all despite their differences in volume. These facts significantly affected the crumb internal structure, which was successfully characterised by an image analysis technique. Crumb moisture-structure-texture relationships were analysed in two different zones of cross-section bread slices. The results showed how an increasing co-product level enhanced the homogenization of moisture distribution and hardness across crumb zones, and also reduced the structure differences between them. Moisture and hardness presented high correlation levels with changes in the structure of crumb zones during storage, which allowed the significant effect of co-product on the crumb moisture-structure-texture relationships to be knownin both the bread-making process and storage time., This study was supported by the Regional Valencian Ministry of Culture, Education and Sport for Scientific and Technological Politics by Project entitled "Use of non-wheat flours, from co-products of the food industry, to produce bread, cakes and snacks (AICO/2015/107)" and by the University Polytechnic of Valencia by program "Ayudas para la Contratacin de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV (PAID-10-17)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-organic and covalent organic frameworks as single-site catalysts

  • Rogge, S. M. J.
  • Bavykina, Anastasiya
  • Hajek, J.
  • Olivos-Suarez, A. I.
  • Sepulveda-Escribano, A.
  • Vimont, A.
  • Clet, G.
  • Bazin, P.
  • Kapteijn, Freek
  • Daturi, M.
  • Ramos-Fernandez, Enrique V.
  • Van Speybroeck, Veronique
  • Gascon, Jorge
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions., S. M. J. Rogge, J. Hajek, and V. Van Speybroeck acknowledge the Fund for Scientific Research - Flanders (FWO), the Research Board of Ghent University (BOF) and BELSPO in the frame of IAP/7/05 for financial support. V. Van Speybroeck acknowledges funding from the European Union's Horizon 2020 research and innovation programme (consolidator ERC grant agreement no. 647755 - DYNPOR (2015-2020)). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 641887 (project acronym: DEFNET). W. Dewitte and C. Caratelli are acknowledged for technical support with the figures. J. Gascon acknowledges funding from the European Union's 2020 research and innovation programme (ERC grant agreement no. 335746 - CrystEng-MOF-MMM) and from the Dutch Organization for Scientific Research (NWO, VIDI grant agreement 723.012.107 - MetMOFCat).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elastic and cost-effective data carrier architecture for smart contract in blockchain

  • Liu, Xiaolong
  • Muhammad, Khan
  • Chen, Yu-Wen
  • Yuan, Shyan-Ming
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Smart contract, which could help developer deploy decentralized and secure blockchain application, is one of the most promising technologies for modern Internet of things (IoT) ecosystem today. However, Ethereum smart contract lacks of ability to communicate with outside IoT environment. To enable smart contracts to fetch off-chain data, this paper proposes a data carrier architecture that is cost-effective and elastic for blockchain-enabled IoT environment. Three components, namely Mission Manager, Task Publisher and Worker, are presented in the data carrier architecture to interact with contract developer, smart contract, Ethereum node and off-chain data sources. Selective solutions are also proposed for filtering smart contract event and decoding event log to fit different requirements. The evaluation results and discussions show the proposed system will decrease about 20USD deployment cost in average for every smart contract, and it is more efficient and elastic compared with Oraclize Oracle data carrier service., This work was supported by the fund of National Natural Science Foundation of China (Grants No. 61702102), Natural Science Foundation of Fujian Province, China (Grant No. 2018J05100), Foundation for Distinguished Young Scholars of Fujian Agriculture and Forestry University (Grant No. xjq201809), and in part by the MOST of Taiwan (Grant No. 107-2623-E-009-006-D).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diversity of RNA Viruses and Circular Viroid-like Elements in Heterobasidion spp. in Near-Natural Forests of Bosnia and Herzegovina

  • Dálya, Laszlo Benedek
  • Hejna, Ondrej
  • Stanivukovic, Zoran
  • Kudlácek, Tomas
  • Botella, Leticia
  • La Peña Del Rivero, Marcos De|||0000-0002-7949-8459
[EN] Heterobasidion root rot fungi represent a major threat to conifer forest stands, and virocontrol (biocontrol) has been proposed as an alternative strategy of disease management in recent years. Here, we investigated the occurrence of RNA viruses and viroid-like genomes in Heterobasidion annosum sensu lato in near-natural forests of Bosnia and Herzegovina (Dinaric Alps), a region previously unexplored in this regard. Seventeen H. annosum s.l. isolates were screened for virus presence by RNA Sequencing and bioinformatic analyses. In total, 32 distinct mycoviruses were discovered in the datasets, 26 of which were previously unknown. The detected viruses represent two dsRNA (Partitiviridae and Curvulaviridae), six linear ssRNA (Mitoviridae, Narnaviridae, Botourmiaviridae, Virgaviridae, Benyviridae, and Deltaflexiviridae) and three circular ssRNA (Dumbiviridae, Quambiviridae, and Trimbiviridae) virus families. In addition to the known circular ambiviruses with their hammerhead (HHRz) and hairpin (HPRz) ribozymes, two other smaller non-coding circular RNAs of ca. 910 bp each were identified encoding HHRz and deltavirus (DVRz) ribozymes in both polarities of their genomes. This study documents the first report of a putative viroid-like RNA agent in Heterobasidion, along with beny-like and deltaflexivirus-like viruses in Heterobasidion abietinum, and expands the known virosphere of Heterobasidion species in Southeastern European forests., This work was supported by the European Regional Development Fund, Project "Phytophthora Research Centre", Reg. No. CZ.02.1.01/0.0/0.0/15_003/0000453. M.dlP. was supported by the Generalitat Valenciana through the PROMETEO program, Project CIPROM/2022/21. The first author's internship at the University of Banja Luka was supported by an Erasmus + grant (ERASMUS + 2020-1-CZ01-KA107-078115) funded by the EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Stability and Performance of Cesium Mixed Lead Halides for Photovoltaic Applications

  • Doumbia, Youssouf
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] We have focused on mixed halide perovskite thin films of the formula CsPbX3 where (X-3 = Br-3, Cl-3, I-3, Br2Cl, Br2I, and I2Cl) prepared by spin-coating in order to study the effects of partial and total Br substitution. For this purpose, we performed a series of characterizations, including x-ray diffraction, scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV-visible spectroscopy. All the films except CsPbI2Br showed two characteristic peaks at 2 theta angles of 26.80 degrees and 51.80 degrees corresponding to the (111) and (220) crystallographic planes. In the case of CsPbI2Br, we have the same peaks, but the main ones are located at 15 degrees and 30 degrees for the (100) and (200) planes, respectively. SEM examined the surface morphology of the different mixed lead halide films; the best surface was that of the CsPbBr2I sample, which is well-coated, dense, with no pinholes and no cracks, and has the largest grain size. In addition, all the mixed halide films showed good absorbance, especially between 600 nm and 900 nm, with band gap values between 1.94 and 2.92 eV., Author Youssouf Doumbia acknowledges his grant from Erasmus+ KA 107. Author Amal Bouich acknowledged the post-doctoral contract supported by the RRHH, the Postdoctoral contract Margarita Salas financed with the union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robotic assessment of proprioception in individuals with patellar tendinopathy: A feasibility and pilot study

  • Munoz-Gomez, Elena
  • Gonzalez-Pons, Hector
  • Ingles, Marta
  • Moreno-Segura, Noemi
  • Molla-Casanova, Sara
  • Serra-Añó, Pilar
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Background: Individuals with patellar tendinopathy often exhibit impaired proprioception, which may contribute to symptom persistence and injury recurrence. A parallel robotic system based on a musculoskeletal knee model has shown valid and reliable performance for assessing joint position sense (JPS). This study aims to evaluate the feasibility of a protocol for the robotic assessment of knee proprioception in individuals with patellar tendinopathy and to compare their proprioceptive performance with that of healthy controls. Methods: Twenty-one participants with patellar tendinopathy (PTG) and fifteen healthy individuals (CG) (mean age: 32.36 (9.53) years) completed a single session of knee proprioception evaluation. JPS was assessed at 30 degrees and 50 degrees using passive (PJPS) and active (AJPS) repositioning tasks. Findings: The PTG exhibited greater absolute angular error than the CG during PJPS at 30 degrees (p = 0.04) and 50 degrees (p = 0.04), and during AJPS at 30 degrees (p = 0.01), with no differences detected in the 50 degrees AJPS task (p > 0.05). The feasibility analysis showed that perceived effort, difficulty, and pain were generally low, whereas comfort and satisfaction were rated highly. Interpretation: This study supports the use of a parallel robotic system as a viable instrument for assessing knee proprioception in people with patellar tendinopathy. Significant proprioceptive deficits were identified in this population compared to healthy controls, particularly in passive JPS at 30 degrees and 50 degrees, and in active JPS at 30 degrees., This study was funded by the Spanish Government (PID2021-125694OB-I00: co-financed by EU FEDER funds) ; the Conselleria d'Innovacio , Universitats, Ciencia i Societat, Generalitat Valenciana (CIAICO/2021/107) ; and the Spanish Government (FPU23/01464) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aptamer-based stir bar sorptive extraction combined with MALDI-TOF-MS for the analysis of milk protein allergen B-lactoglobulin in foods

  • Piqueras-García, Natalia
  • Vergara-Barberán, María
  • Simó-Alfonso, Ernesto Francisco
  • Benavente, Fernando
  • Lerma-García, María Jesús
  • Herrero-Martínez, José Manuel
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] In this work, the preparation of an aptamer-based coating for stir bar sorptive extraction (SBSE) aimed at the selective clean-up and preconcentration of the allergenic milk protein ß-lactoglobulin (ß-LG) is described. To this end, a thiol-terminated aptamer was grafted onto a vinylized polytetrafluoroethylene stir bar via ¿thiol-ene¿ click chemistry. The aptamer affinity coating was characterized and several parameters that affect SBSE efficiency were evaluated. The optimized aptamer-based SBSE method combined with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS) analysis provided suitable linearity (0.25¿50 µg¿mL¿ 1), satisfactory limit of detection (LOD) (0.08 µg¿mL¿ 1 ß-LG), and relative standard deviations below 5.2 % among the extraction units, which could be reused for 10 extraction cycles and were stable for at least one month. The applicability of the developed method was successfully demonstrated by analyzing low levels of ß-LG in different dairy-free food samples (i.e. a 100 % cocoa dark chocolate, a hydrolyzed hypoallergenic infant formula, and a white bread) and in white breads with declared and undeclared contents of milk (84 %<recoveries < 93 %)., This study was funded by grants PID2021-125459OB-I00 and PID2021-127137OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and the grant CIAICO/2022/183 funded by Generalitat Valenciana. Natalia Piqueras-Garcia thanks an INVESTIGO contract through the project INVEST/2022/107 funded by the Generalitat Valenciana. Maria Vergara-Barberan thanks the Generalitat Valenciana for a VALi + D postdoctoral research contract (ref. APOSTD/2020/213)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Insight of ZnO/CuO and ZnO/Cu2O solar cells efficiency with SCAPS simulator

  • Klegayere Emmanuel, Kone
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Despite the low power conversion efficiency of solar cells n-ZnO/p-CuO and n-ZnO/p-Cu2O, they can contribute to the development of photovoltaic energy. To optimize their yields, the simulator software SCAPS-1D was used in this work to do the simulations of the two cells (Fig. 1) by varying certain parameters. Its parameters were thickness, bandgap, shallow uniform donor density (ND) for the ZnO, and shallow uniform acceptor density (NA) for the CuO and Cu2O. The values optimized of these parameters gave short-circuit currents and efficiencies of 27.7755 mA.cm¿2, 31.40%, and 12.9790 mA.cm¿2, 13.34% respectively for the solar cells n-ZnO/p-CuO and n-ZnO/p-Cu2O (Fig. 2). Our results reveal that the n-ZnO/p-CuO solar cell is more efficient than the n-ZnO/p-Cu2O solar cell and can be used for converting solar energy into electricity., This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. Erasmus+ (Grant No. KA107), Union European next Generation EU, (Grant No. RRHH), The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

The tools related to mathematics teachers’ pedagogical reasoning: critical review

  • Yang, Kai-Lin
  • Tambunan, Siska
[EN] Shulman (1987) introduced pedagogical reasoning in his model of pedagogical reasoning and action, refers to the phases of activities involving comprehension, transformation, instruction, evaluation, and reflection. The present study aims at a critical review on the tools for investigating the phases of pedagogical reasoning and action for mathematics teachers. Based on a focused search in the database Scopus, 13 articles were reviewed. Findings showed three categories included mathematical tasks, teaching materials and videos. We further classified each category and connected it with Shulman’s phases of pedagogical reasoning. Mathematical tasks are classified as pure mathematical tasks and mathematical pedagogical tasks which can be connected to comprehension and transformation phases. Teaching materials are classified into three sub-categories, including materials in planning session, in implementation session, and after implementation which can be connected to comprehension and transformation, instruction, and evaluation and reflection phases, respectively. Lastly, videos are classified into three subcategories including video of self-teaching, others teaching, and movie which connected to evaluation and reflection phases. Two findings are highlighted including (1) the correspondence between the tools for pedagogical reasoning and Shulman’s phases of pedagogical reasoning and (2) the features of each sub-category of the tools related to pedagogical reasoning., This research was funded by the Ministry of Science and Technology (MOST), Taiwan, R.O.C., under the grant number MOST 107-2511-H-003 -004 -MY3.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Picture Fuzzy Distance Measure in Controlling Network Power Consumption

  • Roan, Ngan Thi
  • Andújar, Fran
  • Le, Son Hoang
  • Vu, Manh Van
  • Smarandache, Felorentin
  • Coll, Salvador|||0000-0002-7795-7252
  • Alonso Díaz, Marina|||0000-0001-7079-5898
  • Martínez-Rubio, Juan-Miguel|||0000-0002-9748-0332
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
[EN] In order to solve the complex decision-making problems, there are many approaches and systems based on the fuzzy theory were proposed. In 1998, Smarandache introduced the concept of single-valued neutrosophic set as a complete development of fuzzy theory. In this paper, we research on the distance measure between single-valued neutrosophic sets based on the H-max measure of Ngan et al. [8]. The proposed measure is also a distance measure between picture fuzzy sets which was introduced by Cuong in 2013 [15]. Based on the proposed measure, an Adaptive Neuro Picture Fuzzy Inference System (ANPFIS) is built and applied to the decision making for the link states in interconnection networks. In experimental evaluation on the real datasets taken from the UPV (Universitat Politècnica de València) university, the performance of the proposed model is better than that of the related fuzzy methods., This work has been supported by MINECO and the European ERDF under grants PID2019-105903RB-I00 and RTI2018-098156-B-C51. The autor (R.T. Ngan) also would like to thank the Erasmus+ Mobility Program (2016-1-ES01-KA107-023453) for supporting her work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Elaboration et caractérisation de couches minces de cuivre, indium, gallium et sélénium (CIGS) pour cellules solaires

  • Armel Ignace, N&apos;Guessan
[ES] Este proyecto de investigación se centra en el campo de las energías renovables y más concretamente de la energía solar fotovoltaica. La tesis se ha focalizado en el desarrollo de películas delgadas de Cobre-Indio-GalioSelenio o Sulfuro (CuIn1-xGax(Se,S)2) con técnicas de bajo coste. La mayoría de las celdas basadas en CIGS utilizan el CdS como capa de búfer. En nuestro experimento, usaremos otra capa de tampón como SnS2 o ZnO1-xSx como alternativa a CdS para mejorar nuestra célula. El estudio se centrará en el contacto tampón/absorbedor para reducir la recombinación. En este trabajo, reportamos la investigación experimental del desarrollo y desarrollo de la caracterización de la calcopirita de cobre, indio, galio y selenio (CIGS) por la técnica de electrodeposición y pulverización. Además, nos hemos centrado en el contacto entre la capa generadora que es el absorbedor y el circuito externo. Las propiedades eléctricas de este contacto dependen principalmente del proceso de deposición de la capa absorbente en el contacto trasero utilizado. Por lo tanto, será necesario controlar el crecimiento de la capa interfacial de MoSe2 entre el absorbedor y el contacto posterior en el caso del molibdeno para obtener un rendimiento óptimo. Por supuesto, la eficiencia de la célula depende de un gran número de parámetros experimentales y varía según los métodos de fabricación, especialmente la capa absorbente CIGS. En nuestro caso, las técnicas utilizadas son la galvanoplastia y la pirólisis por pulverización para la deposición de películas CIGS. Estas técnicas son más baratas, prácticamente alcanzables en cualquier laboratorio y dan un buen rendimiento. Por lo tanto, mediante técnicas de deposición de bajo coste hemos estudiado el comportamiento de la célula solar con una capa de MoSe2 como capa interfacial y el efecto de la banda prohibida de la capa formada y la capa tampón utilizada sobre los parámetros de las células solares CIGS. Los resultados de este estudio podrían ayudar a mejorar el rendimiento de las células solares CIGS utilizando técnicas de bajo coste., [CA] Aquest projecte de recerca es centra en el camp de les energies renovables i més concretament en l'energia solar fotovoltaica. La tesi s'ha centrat en el desenvolupament de pel·lícules primes de Coure-Indi-Gali-Seleni o Sulfur (CuIn1-xGax(Se,S)2) amb tècniques de baix cost. La majoria de les cel·les basades en CIGS utilitzen el CdS com a capa de búfer. En el nostre experiment, farem servir una altra capa de tampó com ara SnS2 o ZnO1-xSx com a alternativa al CdS per millorar la nostra cel·la. L'estudi es centrarà en el contacte tampó/absorbidor per reduir la recombinació. En aquest treball, reportem la recerca experimental del desenvolupament i la caracterització de la calcopirita de coure, indi, gali i seleni (CIGS) mitjançant la tècnica d'electrodeposició i pulverització. A més, ens hem centrat en el contacte entre la capa generadora que és l'absorbidor i el circuit extern. Les propietats elèctriques d'aquest contacte depenen principalment del procés de deposició de la capa absorbent en el contacte posterior utilitzat. Per tant, serà necessari controlar el creixement de la capa interfacial de MoSe2 entre l'absorbidor i el contacte posterior en el cas del molibdè per obtenir un rendiment òptim. És clar que l'eficiència de la cel·la depèn d'un gran nombre de paràmetres experimentals i varia segons els mètodes de fabricació, especialment la capa absorbent CIGS. En el nostre cas, les tècniques utilitzades són la galvanoplàstia i la piròlisi per pulverització per a la deposició de pel·lícules CIGS. Aquestes tècniques són més econòmiques, pràcticament assolibles en qualsevol laboratori i proporcionen un bon rendiment. Per tant, mitjançant tècniques de deposició de baix cost hem estudiat el comportament de la cel·la solar amb una capa de MoSe2 com a capa interfacial i l'efecte de la banda prohibida de la capa formada i la capa tampó utilitzada sobre els paràmetres de les cel·les solars CIGS. Els resultats d'aquest estudi podrien ajudar a millorar el rendiment de les cel·les solars CIGS utilitzant tècniques de baix cost., [EN] Our research project aims at the field of renewable energies and more specifically, photovoltaic solar energy, i.e. solar cells, our study focuses on the elaboration of Copper-Indium-Gallium-Selenium or Sulfide (CuIn1-xGax(Se,S)2 thin films for solar cells with low-cost techniques also to develop the performance of the typical solar cell structure: n-ZnO/i-ZnO/n-tampon/p-CIGS/p+-MoSe2/back contact. Most of the CIGS based cells use CdS as a buffer layer. In our experiment, we will make use of another buffer layer such as SnS2 or ZnO1-xSx as an alternative to CdS to improve our cell. The investigation will be carried out on the buffer/absorber contact to reduce recombination. In addition, we will focus on the contact between the generating layer which is the absorber and the external circuit. The electrical properties of this contact depend essentially on the deposition process of the absorber layer on the back contact used. It will thus be necessary to control the growth of the MoSe2 interfacial layer between the absorber and the back contact in the case of Molybdenum in order to obtain an optimal yield. Obviously, the yield of the cell depends on a large number of experimental parameters and varies according to the fabrication methods, especially of the CIGS absorber layer. In our case the techniques used are electrodeposition and spray pyrolysis for the deposition of CIGS films, there techniques are cheaper, practically feasible in the laboratory and give good performance. Therefore, we will investigate, using low-cost deposition techniques, the performance of the cell with a MoSe2 layer as an interfacial layer and the effect of the bandgap of the formed layer and the buffer layer used on the parameters of the CIGS solar cells. The results of this study could help to improve the performance of the CIGS solar cell using low-cost techniques.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cyber-Resilient Controllers for Smart Distribution Grid Control Layers

  • Chandramathi, Jishnu Sankar Vijayasekharan
  • Nair, Manjula G.
  • Álvarez, Carlos|||0000-0002-8238-1606
[EN] This paper presents a novel cyber-resilient control strategy for enhancing the operational security of future smart distribution systems (SDSs) against compromised control setpoints originating from higher-level controllers. The proposed framework addresses the structure, control architecture, and cyber vulnerabilities of SDSs by embedding an anomaly detection and autonomous response mechanism within each control layer. An artificial neural network (ANN)-based detector is employed to identify non-implementable or malicious control commands based on local measurements and grid location data. Upon detecting a cyber anomaly, the controller avoids disconnection and enables droop-based autonomous operation, ensuring continued grid support. The proposed strategy was validated using MATLAB/Simulink R2022a under various dynamic test scenarios, demonstrating its ability to maintain system stability. Unlike prior studies that rely on offline anomaly detection, this study presents a real-time capable closed-loop control solution that detects anomalies during simulation runtime. The proposed method rejects erroneous commands arising from both cyber intrusions and human errors, thereby enhancing the cyber-resilience and reliability of SDS operations., This research was partially funded by Erasmus+ KA107.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Migration cost optimization for service provider legacy network migration to software-defined IPv6 network

  • Dawadi, Babu R.
  • Rawat, Danda B.
  • Joshi, Shashidhar R.
  • Keitsch, Martina M.
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] This paper studies a problem for seamless migration of legacy networks of Internet service providers to a software-defined networking (SDN)-based architecture along with the transition to the full adoption of the Internet protocol version 6 (IPv6) connectivity. Migration of currently running legacy IPv4 networks into such new approaches requires either upgrades or replacement of existing networking devices and technologies that are actively operating. The joint migration to SDN and IPv6 network is considered to be vital in terms of migration cost optimization, skilled human resource management, and other critical factors. In this work, we first present the approaches of SDN and IPv6 migration in service providers' networks. Then, we present the common concerns of IPv6 and SDN migration with joint transition strategies so that the cost associated with joint migration is minimized to lower than that of the individual migration. For the incremental adoption of software-defined IPv6 (SoDIP6) network with optimum migration cost, a greedy algorithm is proposed based on optimal path and the customer priority. Simulation and empirical analysis show that a unified transition planning to SoDIP6 network results in lower migration cost., U.S. National Science Foundation (NSF), Grant/Award Number: CNS 1650831 and HRD 1828811; ERASMUS+ KA107; Nepal Academy of Science and Technology (NAST); Norwegian University of Science and Technology; University Grant Commission (UGC), Nepal, Grant/Award Number: FRG/74_75/Engg-1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrothermal Synthesis of Ruthenium Nanoparticles with a Metallic Core and a Ruthenium Carbide Shell for Low-Temperature Activation of CO2 to Methane

  • Cored-Bandrés, Jorge
  • Garcia-Ortiz, Andrea
  • Liu, Lichen
  • Chuang, Cheng-Hao
  • Chan, Ting-Shan
  • Escudero, Carlos
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Ruthenium nanoparticles with a core-shell structure formed by a core of metallic ruthenium and a shell of ruthenium carbide have been synthesized by a mild and easy hydrothermal treatment. The dual structure and composition of the nanoparticles have been determined by synchrotron X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) analysis, and transmission electron microscopy (TEM) imaging. According to depth profile synchrotron XPS and X-ray diffraction (XRD) analysis, metallic ruthenium species predominate in the inner layers of the material, ruthenium carbide species being located on the upper surface layers. The ruthenium carbon catalysts presented herein are able to activate both CO2 and H-2, exhibiting exceptional high activity for CO2 hydrogenation at low temperatures (160-200 degrees C) with 100% selectivity to methane, surpassing by far the most active Ru catalysts reported up to now. On the basis of catalytic studies and isotopic (CO)-C-13/(CO2)-C-12/H-2 experiments, the active sites responsible for this unprecedented activity can be associated with surface ruthenium carbide (RuC) species, which enable CO2 activation and transformation to methane via a direct CO2 hydrogenation mechanism. Both the high activity and the absence of CO in the gas effluent confer relevance to these catalysts for the Sabatier reaction, a chemical process with renewed interest for storing surplus renewable energy in the form of methane., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa" Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project. The authors also thank the Microscopy Service of UPV for kind help with measurements. A G.O. thanks "Severo Ochoa" Programme (SEV-2016-0683) for a predoctoral fellowship. C.-H.C. acknowledges financial support from MOST project 107-2112-M-032-005. J.C. thanks the Spanish Government (MINECO) for a "Severo Ochoa" grant (BES-2015-075748). The authors are thankful for the support of the ALBA Synchrotron Light Source staff for the successful performance of the measurements at CIRCE beamline (BL24).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical and structural investigation of methylammonium lead perovskite mixed halide (I, Br, and Cl) on spin-coated zinc oxide

  • Klegayere Emmanuel, Kone
  • Marí Soucase, Bernabé
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
[EN] This study investigated the effect of mixing different halides bromine (Br) with iodine (I) and Br with chlorine (Cl) and using only bromide for methylammonium lead perovskites films deposited in ZnO to produce different heterojunctions ZnO/MAPbBr3, ZnO/MAPbBr2I and ZnO/MAPbBr2Cl. Thus, these three heterojunction samples were produced and characterized. The perovskite is deposited at ZnO films showed two main peaks located at 2¿ = 33.66° and 2¿ = 37.69°. These peaks correspond to the (0 0 2) and (1 0 1) planes of the hexagonal wurtzite structure of ZnO respectively. The XRD results indicate that all the heterojunction samples show two main peaks at 2¿ = 14.79° and 2¿ = 29.83° for the (1 0 0) and (2 0 0) crystallographic planes respectively. The peaks of the sample mixed with iodine are the most intense and those of the sample mixed with chlorine are the least intense. These results also reveal that the mixed samples have lower crystallinity than the unmixed ZnO/MAPbBr3 sample. The SEM results confirmed this. The UV¿Visible results indicate that the sample mixed with iodine absorbs the most and has the smallest band gap of 2.15 eV. The band gaps of the heterojunctions range from 2.15 eV to 2.4 eV. The unmixed sample (ZnO/MAPbBr3) has the largest band gap. The degradation study showed that the sample mixed with iodine degrades faster., Author Klegaye Emmanuel Kone thanks Erasmus + KA107 for the grant. Amal Bouich acknowledges Ministerio de Ciencia e Innovacion (Spain) for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). This work has been funded by the Conselleria d Innovacio, Universitats, Ciencia i Societat Digital (Generalitat valenciana, Prometeus 2023 CIPROM2022/03) and the Agencia Estatal de Investigacion (Spain) through project PID2019-107137RBC21/AEI/10.13039/501100011033 and by ERDF under the funding Away of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First Report of Tomato Leaf Curl New Delhi Virus Infecting Cucurbit Plants in Algeria

  • Kheireddine, A.
  • Sáez-Sánchez, Cristina
  • Sifres Cuerda, Alicia Gemma|||0000-0002-9498-0083
  • Picó Sirvent, María Belén|||0000-0001-7761-990X
  • López Del Rincón, Carmelo|||0000-0001-7459-1315
This work was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades, cofunded with FEDER funds (project nos. AGL2017-85563-C2-1-R and RTA2017-00061-C03-03 [INIA]) and the programa para grupos de investigacion de excelencia from the Conselleria d'Educacio, Investigacio, Cultura i Esport, (Generalitat Valenciana) (Prometeo Program 2017/078). A. Kheireddine thanks the Erasmus+ Programme of the European Union for her mobility project (KA107 2018-20). C. Saez is a recipient of a predoctoral fellowship from Generalitat Valenciana, cofunded by the Operational Program of the European Social Fund (FSECV 2014-2020) (grant no. ACIF/2016/188).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic degradation of pharmaceuticals using natural sand-based TiO2 catalysts: Preparation, characterization, and reactivity

  • Chahid, Abdessalim
  • Zahraoui, Brahim
  • Lahcene, Driss
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Quartz sand collected from the dunes of Taghit, a region of Bechar in southwestern Algeria, served a dual purpose in this study. Firstly, it acted as a natural support for the TiO2 photocatalyst. Secondly, it served as a lowcost precursor for silica extraction through an alkaline fusion process. TiO2 nanoparticles were efficiently immobilized on both Dune Sand (TiO2-DS) and extracted silica (TiO2-SP) using an organometallic coating approach, providing a versatile TiO2-based photocatalyst solution. Characterizing the prepared catalysts included techniques such as ICP, N2 adsorption XRD, FTIR, FESEM, and XPS. It was noted that TiO2 exhibited a well-coated layer on both dune sand and extracted silica, demonstrating a prominent anatase crystalline phase. Chemical composition analysis revealed the presence of chemical bonds between Ti and Si in the TiO2-SP and TiO2-DS samples. Moreover, TiO2 particles showed improved dispersion on the surface of TiO2-SP compared to TiO2-DS due to the larger specific surface area of the extracted silica resulting in S BET of 83.74 m2.g-1 for TiO2-SP compared to 30.15 m2.g-1 for TiO2-DS. The photocatalytic performance of TiO2-DS and TiO2-SP was compared to P25 in the abatement of three common pharmaceutical compounds: amoxicillin (AMO), ibuprofen (IBU), and acetaminophen (ACT), with a focus on the influence of the support material on photoactivity. TiO2-SP exhibited a slight advantage in terms of mineralization with 90 %, 92 %, and 99 % after 300 min for ACT, AMO, and IBU, respectively, Whereas the TiO2-DS catalyst resulted in slightly lower results of 81 %, 85 %, and 97 % for the same drugs over the same irradiation period. Additionally, both TiO2-SP and TiO2-DS demonstrated easy separation from the reaction medium by quick sedimentation upon agitation cessation. In contrast, P25 remained in a colloidal suspension., This project gratefully acknowledges the financial support from the European Union as part of the Erasmus + KA1017 project. Special appreciation is extended to the Universitat Politecnica de Valencia (UPV) and the Instituto de Tecnologia Quimica (ITQ) for their invaluable contributions and support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Legacy Network Integration with SDN-IP Implementation towards a Multi-Domain SoDIP6 Network Environment

  • Dawadi, Babu R.
  • Rawat, Danda B.
  • Joshi, Shashidhar R.
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The logical separation of the data plane and the control plane of the network device conceptually defined by software-defined networking (SDN) creates many opportunities to create smart networking with better efficiency for network management and operation. SDN implementation over telecommunications (Telcos) and Internet service provider (ISP) networks is a challenging issue due to the lack of a high maturity level of SDN-based standards and several other critical factors that are considered during the real-time migration of existing legacy IPv4 networks. Different migration approaches have been studied; however, none of them seem to be close to realizing implementation. This paper implements the SDN-IP and Open Network Operating System (ONOS) SDN controller to migrate legacy IPv4 networks to multi-domain software-defined IPv6 (SoDIP6) networks and experimentally evaluate the viability of joint network migration in the ISP networks. We present results using extensive simulations for the suitable placement of the master ONOS controller during network migration by considering minimum control path latency using optimal path routing and the breadth first router replacement (BFR) technique. Our empirical analysis and evaluations show that the identification of the median router to attach the master controller and router migration planning using BFR give better results for carrier-grade legacy networks' migration to SoDIP6 networks., This research was partially funded by the Norwegian University of Science and Technology, Trondhiem, Norway (NTNU) under Sustainable Engineering Education Project (SEEP) financed by EnPE, University Grant Commission (grant-ID: FRG7475Engg01), Bhaktapur, Nepal, Nepal academy of Science and Technology (NAST), Kathmandu, Nepal, and U.S. National Science Foundation (NSF). The work of Danda B. Rawat was partly supported by the U.S. National Science Foundation (NSF) under grants CNS 1650831 and HRD 1828811. Any opinions, findings, and conclusions or recommendations expressed in this article are those of the authors and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the NSF. We are thankful to the ERASMUS+ KA107 project and the GRC lab team members at Universitat Politècnica De València for the research support and facilitation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation On The Crystallinity And Optoelectronic Properties Of Thin Films Of Zno/Mapbx3heterojunctionsynthesized Via The Spin-Coating Method

  • Soro, Donafologo
  • Kone, Klegayere Emmanuel
  • Marí-Guaita, Julia
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In this paper, thin layers of ZnO were deposited onto fluorine-doped tin oxide (FTO) substrates. Subsequently, different layers of perovskite (MAPbX3, X = I, Br, Cl) were spin-coated onto these ZnO layers. The resulting layers were characterized using X-ray diffraction (XRD), UV-Visible spectroscopy, and scanning electron microscopy (SEM). Special attention was given to the surface topography, the crystallinityand optoelectronic properties.XRD analysis of all the thin layers showed two diffraction peaks for the ZnO/MAPbX3 heterojunction corresponding to the crystallographic planes (100) and (200). The ZnO/MAPbBr3 peaks were more intense than the peaks from the ZnO/MAPbI3 and ZnO/MAPbCl3 samples. SEM images showed the crystalline nature of the produced thin layers. The grain size of the ZnO/MAPbBr3 sample was approximately 747.00 nm, while those of the ZnO/MAPbI3 and ZnO/MAPbCl3 samples were 412.00 nm and 330.55 nm, respectively. UV-visible characterization demonstrated that the iodine-based sample had the highest solar radiation absorption and had the smallest bandgap, with Eg = 1.95 eV., The authors acknowledge the support provided by Erasmus+ KA 107 which offers scholarships for the realization of this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolutionary gaming approach for decision making of Tier-3 Internet service provider networks migration to SoDIP6 networks

  • Dawadi, Babu R.
  • Rawat, Danda B.
  • Joshi, Shashidhar R.
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] With the increasing number of Internet of Things (IoT) devices, current networking world is suffering in terms of management and operations with lack of IPv4 addresses leading to issues like network address translation (NAT) proliferation, security and quality of services. Software-defined networking (SDN) and Internet Protocol version 6 (IPv6) are the new networking paradigms evolved to address related issues of legacy IPv4 networking. To adapt with global competitive environment and avoid all existing issues in legacy networking system, network service providers have to migrate their networks into IPv6 and SDN-enabled networks. But immediate transformations of existing network are not viable due to several factors like higher cost of migration, lack of technical human resources, lack of standards and protocols during transitions, and many more. In this paper, we present the migration analysis for proper decision making of network transition in terms of customer demand, traffic engineering, and organizational strength with operation expenditure for network migration using evolutionary gaming approach. Joint migration to SDN-enabled IPv6 network from game theoretic perspective is modeled and is validated using numerical results obtained from simulations. Our empirical analysis shows the evolutionary process of network migration while different internal and external factors in the organization affect the overall migration. Evolutionary game in migration planning is supportive in decision making for service providers to develop suitable strategy for their network migration. The proposed approach for migration decision making is mostly applicable to fairly sustained service providers who lack economics, regulation/policy, and resources strengths., ERASMUS+, Grant/Award Number: KA107; UGC-NP, Grant/Award Number: FRG-074/75-Engg-01; NTNU-EnPE-MSESSD; US National Science Foundation, Grant/Award Numbers: CNS 1650831, HRD 1828811; NAST
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Species-specific responses of fish sperm to thermal incubation and activation during short-term storage

  • Zhang, Songpei
  • Peng, Shuang
  • Gao, Yu
  • Ma, Zhijun
  • Cheng, Yu
  • Shazada, Nururshopa Eskander
  • Pérez-Sánchez, Jaime
  • Boryshpolets, Serhii
  • Rodina, Marek
  • Linhart, Otomar
  • Havlíková, Zuzana
  • de Souza-França, Thales
  • Fernández-García, Fátima|||0009-0001-5070-3762
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] Although short-term storage of diluted sperm at 0-2 degrees C with extenders has been shown to effectively preserve sperm quality, its broad applicability across fish species with different thermal preferences-and the ability of stored sperm to respond to elevated incubation or activation temperatures-remains insufficiently understood. To investigate this further, sperm samples from six species: zebrafish, common carp, European eel, gilthead seabream, sterlet and rainbow trout, were accordingly diluted with immobilising solutions and stored at 0-2 degrees C under aerobic conditions for 1 to 28 days depending on the species. The effect of the following incubation and activation at low (4 degrees C) and relatively high temperatures (natural species-specific spawning temperature) on various spermatozoa motility parameters during the storage was estimated. During sperm storage, sperm motility and velocity declined when activated at the species-specific spawning temperature. Nevertheless, incubation and activation at higher temperatures were associated with improved motility parameters in several species. Significant variations were observed between different species in spermatozoa motility (MOT) and velocity (VCL and VSL) during storage, particularly in response to low-or high-temperature incubation and activation. PCA of stored spermatozoa revealed distinct clustering of motility parameters in zebrafish, common carp, and sterlet, indicating clear thermal response patterns. In contrast, European eel and gilthead seabream exhibited no such clustering, reflecting interspecific variability in thermal sensitivity. GLMM analysis revealed that sperm motility parameters were generally affected, albeit to varying degrees, by thermal conditions during incubation and activation. Further validation using an XGBoost model revealed that storage duration, incubation, and activation temperatures markedly impacted sperm motility in thermophilic and mesophilic fish species (zebrafish, common carp, and European eel) compared to the other species. These results underscore the broad applicability and effectiveness of chilled sperm storage at 0-2 degrees C for preserving sperm quality across diverse fish species under variable thermal incubation and activation conditions., This study was partly funded by the Ministry of Education, Youth and Sports of the Czech Republic with the support of VVI CENAKVA Research Infrastructure (ID 90238, MEYS CR, 2023-2026), by the Grant Agency of the University of South Bohemia in Ceske Budejovice (107/2022/Z) and by the Czech Science Foundation (23-06426S). This study forms part of the ThinkInAzul programme and was also supported by MICIU with funding from European Union NextGenerationEU (PRTR-C17 center dot I1) and by Generalitat Valenciana [GVA-THINKINAZUL/2021/012, -24; Principal investigators: J.F. Asturiano (Universitat Politecnica de Valencia) and J. Perez-Sanchez (CSIC), respectively].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Association of Heterotic Groups with Morphological Relationships and General Combining Ability in Eggplant

  • Boyaci, Hatice Filiz
  • Unlu, Abdullah
  • Gumrukcu, Emine
  • Oten, Mehmet
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
[EN] The identification of heterotic groups may provide an important advantage for hybrid eggplant (Solanum melongena) breeding. In this study, we evaluated the combining ability and heterotic patterns of eggplant lines in order to develop improved eggplant cultivars resistant to Fusarium oxysporum f. sp. melongenae (FOM). A set of 62 inbred lines was evaluated with 32 morphological descriptors and their relationships were analyzed through a multivariate cluster analysis. A subset of 39 inbred lines was selected and, together with 15 sister lines, they were crossed with two testers to investigate their general combining ability (GCA) and to establish heterotic groups. Twenty selected inbred lines with high GCA were intercrossed using a half-diallel mating design. Eighty-two hybrids were obtained and evaluated for yield and yield components. We found no association between morphological distance and membership to specific heterotic groups. However, heterosis for yield was found in hybrids among parents from different heterotic groups or that were included in all heterotic groups. Among the hybrids evaluated, some were found to be highly productive and resistant to FOM, being candidates for the registration of new cultivars with dramatically improved characteristics., Scientific and Technological Research Council of Turkey financially supported this study with Project No: 107G027. Mariola Plazas gratefully acknowledges financial support from Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of CFD methods to an anaerobic digester: The case of Ontinyent WWTP, Valencia, Spain

  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Escudero-Gonzalez, Juan
  • Montoya Martinez, Tatiana
  • Fajardo Montanana, Vicente
  • Gualtieri, Carlo
[EN] tIn recent years, Computational Fluid Dynamics (CFD) methods have increasingly been used to charac-terize hydrodynamics and mass-transport in wastewater treatment units. Despite being a well-knownand widely applied treatment method to stabilize sludge before final disposal, the hydrodynamics andmass transport in the anaerobic digester have been less studied than those of other treatment units.This paper presents the preliminary results of a 3D numerical study, investigating the characteristicsof sludge flow inside the Ontinyent Wastewater Treatment Plant anaerobic digester (Valencia, Spain).An approach based upon the Reynolds Averaged Navier-Stokes (RANS) equation was applied, and clo-sure was obtained using the classical standard k model. In this particular case, a single-phase modelwas applied considering both Newtonian and Non Newtonian behavior for the sludge simulations. Thesesingle-phase preliminary results allowed the occurrence of dead zones to be identified as well as pos-sible shortcuts inside the digester. The analysis was carried out considering the velocities and the flowpatterns inside the digester as well as the sludge volume in the digester that had lower velocities than adetermined settling velocity. The model was calibrated using available experimental pressure and tem-perature data. Finally, as well-mixed conditions are strongly desirable for effective anaerobic digestion,proposals to reduce the volume of dead zones are suggested and discussed., The authors acknowledge the cooperation of the Entidad Publicade Saneamiento de Aguas Residuales. This work has been partially supported by Instituto de la Mediana y Pequena Industria Valenciana (IMPIVA, Project IMIDTF/2011/107) and Fondo Europeo de Desarrollo Regional (FEDER). The authors also acknowledge the help of Vincenzo Morone in the preliminary development of the present research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface Morphology And Optical Properties Of Ma-Doped Fapbbr3 Thin Films For Photovoltaic Applications

  • Soro, Donafologo
  • Doumbia, Youssouf
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In general, the optical and structural properties of perovskites can be improved by doping in order to use them for various applications. In this work, we have developed by the method of spin coating in one step thin layers of FA1-xMAxPbBr3, x gradually taking the values0.2 0.4 0.6 0.8 and 0.1. An analysis of the structural and optical properties was made after their characterization. The results obtained indicate thatthe thin films produced exhibit low dislocation densities and good lattice strain values. All have a main peak of maximum intensity located at the 2Ɵ angle of 26.84° for the crystallographic plane (111) and their grain size decreases with the increase in the percentage of methylammonium (MA) from 501 nm to 452 nm. From the morphological point of view, we have well-covered, dense and crack-free surfaces. We also obtained an improvement in the band gap which gradually decreases during doping from 2.68eV for 2% MA to 2.40 eV for 10% MA. At the end of our study, it should be noted that MA-doped FAPbBr3 thin films are of goodquality and can be used in the photovoltaic field., The authors acknowledge the support provided by Erasmus+ KA 107 which offers scholarships for the realization of this research..
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of mixed bromide iodide lead perovskites by spin coating onto single and tandem solar cells applications

  • Armel Ignace, N&apos;Guessan
  • Doumbia, Youssouf
  • D. Soro
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In this study mixed bromide iodide lead perovskites CH3NH3PbI3-xBrx were successfully deposed at Fluorine doped Tin Oxide (FTO) coated glass substrate by Spin coating process. We investigated the processing substitution of PbI3 by PbBr3 in CH3NH3PbI3-xBrx.We also studied the structural and optical properties in Br-gradient MAPbI3-xBrx perovskites thin film deposited using UV-vis absorption and X-ray diffraction of each mixed halide (I/Br) perovskites film and nanostructured for solar cell applications. The surface morphology of mixed halide perovskite films deposited was analyzed by Scanning electron microscopy (SEM). We observed that peaks are shifted toward the higher 2 theta direction as Br content increases, moving from a tetragonal to a cubic structure. The perovskite films deposited show bandgap increasing with Br content. We also used device simulation to study the impact of various compositions of Br on single, and tandem proposed solar cells' performance. In consideration of the Br rate, the suitable device for adequate Br rate in solar cell application has been considered. The tandem J-V shows a short-circuit current density (Jsc) of 38.81 mA/cm2, an open-circuit voltage (Voc) of 1.54 V, fia ll factor (FF) of 73.32 % a,nd Pa CE of 43.84 %., Author N'Guessan Armel Ignace acknowledges his Erasmus+KA 107 grant. The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/ 501100011033) and NextGenerationEU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/ 501100011033 and by "ERDF A way of making Europe"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of kesterite Cu2ZnSn (SxSe1-x) 4 thin films with low-cost for efficient solar cells

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In this study, we conducted an investigation on the Cu2ZnSnS4 (CZTS) k¿esterite compound, which is considered an attractive material for its favorable absorption properties, making it a suitable semiconductor for photovoltaic applications. However, its market potential is limited by its low efficiency of 12.6%, primarily caused by the presence of secondary phases that act as recombination centers. Theoretically, the efficiency limit for CZTS ranges from 31% to 33%. To enhance the photovoltaic performance of CZTS, we employed a doping strategy by incorporating selenium (Se) into the Cu2ZnSn(SxSe1-x)4 film, where the sulfur-to-selenium ratio (S/Se) was optimized within the range of 0< x <1. The CZTS films were deposited onto FTO substrates using the spray pyrolysis technique, which is a simple and cost-effective method. The characterization of these films involved X-ray diffraction (XRD) and UV¿visible spectroscopy analysis. Additionally, the morphology and topography of the CZTSSe layers were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. Trans mission electron microscopy (TEM) was also employed. The results obtained in this study indicate that CZTSSe films exhibit band gap values ranging from 1.54 eV to 1.68 eV and grain compactness, with larger agglomerated grains on the film surface when the S/Se ratio is approximately 0.5 or lower. Moreover, the resistivity measurements revealed significant variations when sulfur and selenium were combined, suggesting the influence of their composition on the electrical properties of the CZTS films., Aka Hyacinthe AKA acknowledged Erasmus107 for the grant, The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). This work has been funded by the Ministerio de Ciencia e Innovacio¿n (Spain) and by the Spanish Agencia Estatal de Investigacio¿n through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/501100011033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding A way of making Europe
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green Public Procurement in Civil Infrastructure Construction: Current Performance and Main Project Characteristics

  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Torres-Machi, Cristina
  • Molenaar, Keith R.
[EN] Green Public Procurement (GPP) is an alternative for public agencies to purchase goods and services with a reduced environmental impact. GPP encourages the integration of environmental criteria in the procurement procedure to achieve goals related to climate change, resource use, and sustainable consumption and production. The inclusion of environmental criteria in public procurement of civil infrastructure has been claimed as an essential step to enhance sustainability in construction. However, there is limited knowledge of how environmental criteria currently are included in public procurement. This study analyzed the inclusion of environmental criteria in public works procurement. Three research objectives were established: (1) identify the environmental criteria included in public-works procurement of civil engineering projects, (2) analyze how these criteria are included in the procurement processes, and (3) identify the characteristics of projects main factors driving in the inclusion of these environmental criteria. This study analyzed 343 tendering documents from 11 different countries at the international level. Tendering documents were analyzed using quantitative content analysis, descriptive statistics, nonparametric techniques, and logistic regressions. Within the 343 tenders analyzed, the study identified 4,500 instances in which environmental indicators were included in the procurement processes. These instances can be classified into 9 criteria (emissions, energy, environmental management, flora and fauna preservation, landscaping, materials, noise and vibration, waste, and water) and 22 subcriteria. These criteria were analyzed considering their inclusion within the procurement process, in general, and in the different stages of the procurement process, in particular: selection criteria, award criteria, and technical specifications and contract performance clauses. The results show that although more than 90% of the analyzed tenders included environmental criteria, the environmental management criterion was the only one included as selection criteria and award criteria. Environmental criteria tend to be included as technical specifications and contract performance clauses. Their inclusion depends on the type of civil infrastructure, the size of the contract, and the type of construction work. Nevertheless, the project delivery and procurement methods do not influence the inclusion of environmental criteria. This study helps procurement professionals and researchers implement GPP by providing guidance on how to incorporate environmental criteria in the procurement process based on the type of infrastructure and characteristics of the project. This action is necessary for governments interested in improving their performance toward the Sustainable Development Goals., AcknowledgmentsThe authors acknowledge the financial support of the Valencian Regional Government (CIGE/2021/107 and CIBEST/2021/224). Furthermore, the valuable commentaries and suggestions of two anonymous reviewers are highly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Powder Manufacturing to Perovskite/&lt, i&gt, p&lt, /i&gt, -type TCO Thin Film Deposition

  • Doumbia, Youssouf
  • Touré, Abdoulaye
  • Mari Guaita, Julia
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Photovoltaic perovskites are very attractive candidates as absorber layers because of their very interesting properties. In the present work, we have two parts: first, we prepared powders of the perovskites MAPbBr3, MAPbI3, and MAPbCl3, with the aim of maximizing their purity, and then we deposited thin films using these powders previously prepared by the one-step spin-coating method. The anti-solvent used was under the same ambient deposition conditions. We concluded with a series of characterizations such as X-ray diffraction, scanning electron microscopy, and UV-visible absorption to better appreciate the quality of the films produced. The crystalline structures of the films, their surface morphology, and their optical properties from the characterizations show that we have succeeded in producing film samples suitable for photovoltaics., Author Youssouf Doumbia acknowledges his grant from Erasmus+ KA 107. The author Amal Bouich postdoctoral researcher acknowledges a Margarita Salas Fellowship (MCIN/AEI/https://doi.org/10.13039/501100011033) for funding support. This work was supported by the EU with Project PID2019-107137RB-C22 and by ERDF under the funding "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Laser backscattering imaging as a non-destructive quality control technique for solid food matrices: Modelling the fibre enrichment effects on the physico-chemical and sensory properties of biscuits

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
[EN] This work focused on modelling the effect of fibre enrichment on the physico-chemical and sensory properties of biscuits by an image analysis of laser backscattering patterns. The study was done on four formulas where, besides the control, three fibre enrichment levels were included (5%, 10% and 20% w/w). The impact on the physico-chemical and sensory properties of biscuits was characterised according to analyses of texture, thickness, area, mass increment, density, flux of solvents (water and milk), colour, taste, mouth texture, etc. Moreover, the image analysis was carried out to collect information from the interaction of a laser with two different biscuit production chain matrices: after the mixing and forming phase (doughs) and after baking (end biscuits). That information was obtained according to the image descriptors generated from the morphology of the observed laser patterns. Both studied matrices offered different, but complementary, information about isolating the variance produced by fibre enrichment for doughs, while the variance generated by heat treatment was also recorded for biscuits. The quantitative prediction of the physico-chemical and sensory properties of biscuits improved when combining both information blocks. The impact of fibre enrichment on biscuits can be modelled by this imaging technique, which could be the basis to develop new non-destructive systems for online inspections made during cookie processing to quickly and non-destructively report physico-chemical and sensory information., This study was supported by the Regional Valencian Ministry of Culture, Education and Sport for Scientific and Technological Politics by Project entitled Use of non-wheat flours, from co-products of the food industry, to produce bread, cakes and snacks (AICO/2015/107) and by the University Polytechnic of Valencia by program Ayudas para la Contratación de Doctores para el Acceso al Sistema Español de Ciencia, Tecnología e Innovación, en Estructuras de Investigación de la UPV (PAID-10-17)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Insight into the effect of halogen X in methylammonium lead halide (MAPbX3) spin-coated on zinc oxide film

  • Kone, Klegayere Emmanuel
  • Marí-Guaita, Julia
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Herein, we investigated the effect of halogen X in methylammonium lead halide (MAPbX3) where X = (Iodide/ Bromide, or Chloride) deposited by spin coating technique on a zinc oxide layer. The ZnO films were first deposited on Fluorine-doped Tin Oxide (FTO) substrates. Then, the perovskite solutions (MAPbI3, MAPbBr3, and MAPbCl3) were deposited on the ZnO layer. The films obtained were characterized by X-ray diffraction (XRD), UV¿Visible spectroscopy, and Scanning Electron Microscopy (SEM). The XRD analysis shows characteristic peaks of the ZnO/MAPbX3 heterojunction corresponding to the (100) and (200). The ZnO/MAPbBr3 peaks are more intense than other sample peaks. This analysis also shows the crystalline character of the films produced. SEM images also show the good crystallinity of the films produced. The images show that the grain sizes of the sample ZnO/MAPbBr3 are the largest compared to others. The UV¿visible characterization showed that the iodine-based sample absorbed better and had a good band gap (Eg = 1.95 eV). The degradation study was carried out after two weeks of the deposition. The results showed that the iodine-based sample degrades faster compared to another halogen. These findings are helpful in producing stable and efficient perovskite-based solar cells., Author Klegayere Emmanuel Kone thanks Erasmus + KA107 for the grant. This work has been funded by the Ministerio de Ciencia e Innovacion (Spain) and by the Spanish Agencia Estatal de Investigacion through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/501100011033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding "A way of making Europe". The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of tiger-nut (Cyperus esculentus) milk co-product on the surface and diffusional properties of a wheat-based matrix

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Alava Pincay, Cecibel
[EN] The food processing industry generates huge volumes of waste and co-products which still contain valuable compounds. Tiger-nut milk production generates large amounts of a co-product with a high insoluble fibre content, which is interesting as a bioactive component from a nutritional viewpoint. This co-product is formed by two different tissues in composition, particle size and colour terms, so two different flours were obtained from them. Both flours were included in a wheat-based matrix at different substitution levels: 5%, 10% and 20% (d.b). The surface tension of matrices, and the wettability and diffusion of water and oil, were studied. The results showed the matrix s reduced capacity to interact with solvents, principally from the 10% substitution level, with diminished surface tension, and a longer time was needed for both water and oil to wet and diffuse., This study was supported by the Regional Valencian Ministry of Culture, Education and Sport for Scientific and Technological Politics, with the project entitled "Use of non-wheat flours, from co-products of the food industry, to produce bread, cakes and snacks (AICO/2015/107)".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodiversity for biocatalysis: A review of the α/β-hydrolase fold superfamily of esterases-lipases discovered in metagenomes

  • Ferrer, Manuel
  • Bargiela, Rafael
  • Martínez-Martínez, Mónica
  • Mir, Jaume
  • Koch, Rainhard
  • Golyshina, Olga V.
  • Golyshin, Peter N.
Review Article., Natural biodiversity undoubtedly inspires biocatalysis research and innovation. Biotransformations of interest also inspire the search for appropriate biocatalysts in nature. Indeed, natural genetic resources have been found to support the hydrolysis and synthesis of not only common but also unusual synthetic scaffolds. The emerging tool of metagenomics has the advantage of allowing straightforward identification of activity directly applicable as biocatalysis. However, new enzymes must not only have outstanding properties in terms of performance but also other properties superior to those of well-established commercial preparations in order to successfully replace the latter. Esterases (EST) and lipases (LIP) from the α/β-hydrolase fold superfamily are among the enzymes primarily used in biocatalysis. Accordingly, they have been extensively examined with metagenomics. Here we provided an updated (October 2015) overview of sequence and functional data sets of 288 EST–LIP enzymes with validated functions that have been isolated in metagenomes and (mostly partially) characterized. Through sequence, biochemical, and reactivity analyses, we attempted to understand the phenomenon of variability and versatility within this group of enzymes and to implement this knowledge to identify sequences encoding EST–LIP which may be useful for biocatalysis. We found that the diversity of described EST–LIP polypeptides was not dominated by a particular type of protein or highly similar clusters of proteins but rather by diverse nonredundant sequences. Purified EST–LIP exhibited a wide temperature activity range of 10–85 °C, although a preferred bias for a mesophilic temperature range (35–40 °C) was observed. At least 60% of the total characterized metagenomics-derived EST–LIP showed outstanding properties in terms of stability (solvent tolerance) and reactivity (selectivity and substrate profile), which are the features of interest in biocatalysis. We hope that, in the future, the search for and utilization of sequences similar to those already encoded and characterized EST–LIP enzymes from metagenomes may be of interest for promoting unresolved biotransformations in the chemical industry. Some examples are discussed in this review., The authors gratefully acknowledge the financial support provided by the European Community project MAMBA (FP7-KBBE-2008-226977), MAGIC-PAH (FP7-KBBE-2009-245226), ULIXES (FP7-KBBE-2010-266473), MicroB3 (FP7-OCEAN.2011-2-287589), KILL-SPILL (FP7-KBBE-2012-312139) and Royal Society UK-Russia Exchange Grant (IE130218). We thank EU Horizon 2020 Program for the support of the Project INMARE H2020-BG-2014-2634486. This work was further funded by grants BIO2011-25012,PCIN-2014-107 and BIO2014-54494-R from the Spanish Ministry of Economy and Competitiveness. The present investigation was funded by the Spanish Ministry of Economy and Competitiveness, the UK Biotechnology and Biological Sciences Research Council (BBSRC) and the German Federal Ministry of Education and Research (BMBF) within the ERA NET-IB2 program, grant number ERA-IB-14-030. The authors gratefully acknowledge the financial support provided by the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and Functional Characterization of a Ruminal β-Glycosidase Defines a Novel Subfamily of Glycoside Hydrolase Family 3 with Permuted Domain Topology

  • Ramírez-Escudero, Mercedes
  • Pozo, Mercedes V. del
  • Marín Navarro, Julia
  • González, Beatriz
  • Golyshin, Peter N.
  • Polaina Molina, Julio
  • Ferrer, Manuel
  • Sanz-Aparicio, J.
Metagenomics has opened up a vast pool of genes for putative, yet uncharacterized, enzymes. It widens our knowledge on the enzyme diversity world and discloses new families for which a clear classification is still needed, as is exemplified by glycoside hydrolase family-3 (GH3) proteins. Herein, we describe a GH3 enzyme (GlyA1) from resident microbial communities in strained ruminal fluid. The enzyme is a β-glucosidase/β-xylosidase that also shows β-galactosidase, β-fucosidase, α-arabinofuranosidase, and α-arabinopyranosidase activities. Short cello- and xylo-oligosaccharides, sophorose and gentibiose, are among the preferred substrates, with the large polysaccharide lichenan also being hydrolyzed by GlyA1. The determination of the crystal structure of the enzyme in combination with deletion and site-directed mutagenesis allowed identification of its unusual domain composition and the active site architecture. Complexes of GlyA1 with glucose, galactose, and xylose allowed picturing the catalytic pocket and illustrated the molecular basis of the substrate specificity. A hydrophobic platform defined by residues Trp-711 and Trp-106, located in a highly mobile loop, appears able to allocate differently β-linked bioses. GlyA1 includes an additional C-terminal domain previously unobserved in GH3 members, but crystallization of the full-length enzyme was unsuccessful. Therefore, small angle x-ray experiments have been performed to investigate the molecular flexibility and overall putative shape. This study provided evidence that GlyA1 defines a new subfamily of GH3 proteins with a novel permuted domain topology. Phylogenetic analysis indicates that this topology is associated with microbes inhabiting the digestive tracts of ruminants and other animals, feeding on chemically diverse plant polymeric materials., This work was supported by Grants BIO2013-48779-C4-2-R, BIO2013-48779-C4-3-R, and BIO2014-54494-R from the Spanish Ministry of Economy and Competitiveness; ERA Net IB2 Project MetaCat through the Spanish Ministry of Economy and Competitiveness Grant PCIN-2014-107; United Kingdom's Biotechnology and Biological Sciences Research Council Grant BB/M029085/1; European Union's Horizon 2020 Research and Innovation Program (Blue Growth, Unlocking the potential of Seas and Oceans) Grant 634486, and the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proteomic Analysis of Methanonatronarchaeum thermophilum AMET1, a Representative of a Putative New Class of Euryarchaeota, “Methanonatronarchaeia”

  • Ferrer, Manuel
  • Sorokin, Dimitry Y.
  • Wolf, Yuri I.
  • Ciordia, Sergio
  • Mena, M. Carmen
  • Bargiela, Rafael
  • Koonin, Eugene V.
  • Makarova, Kira S.
The recently discovered Methanonatronarchaeia are extremely halophilic and moderately thermophilic methyl-reducing methanogens representing a novel class-level lineage in the phylum Euryarchaeota related to the class Halobacteria. Here we present a detailed analysis of 1D-nano liquid chromatography–electrospray ionization tandem mass spectrometry data obtained for “Methanonatronarchaeum thermophilum” AMET1 grown in different physiological conditions, including variation of the growth temperature and substrates. Analysis of these data allows us to refine the current understanding of the key biosynthetic pathways of this triple extremophilic methanogenic euryarchaeon and identify proteins that are likely to be involved in its response to growth condition changes., D.Y.S. was supported by Gravitation-SIAM Program (grant 24002002, Dutch Ministry of Education and Science) and by RFBR (grant 16-04-00035). K.S.M., Y.I.W. and E.V.K. are supported by the intramural program of the U.S. Department of Health and Human Services (to the National Library of Medicine). The proteomic analysis was performed in the Proteomics Facility of The Spanish National Centre for Biotechnology (CNB-CSIC) that belongs to ProteoRed, PRB2-ISCIII, supported by grant PT13/0001. This project has received funding from the European Union’s Horizon 2020 research and innovation program [Blue Growth: Unlocking the potential of Seas and Oceans] under grant agreement No [634486]. This work was further funded by grants BIO2014-54494-R, BIO2017-85522-R, PCIN-2014-107 (within the ERA NET-IB2 program), PCIN-2017-078 (within the ERA-MarineBiotech program) from the Spanish Ministry of Economy, Industry and Competitiveness and grant AC17/00022 from the Instituto de Salud Carlos III (within the ERA TRANSCAN-2 program).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Identificación metagenómica de una ruta de degradación de dibenzotiofeno y caracterización de su regulación génica

  • Martín-Cabello, Guadalupe
  • Terrón-González, Laura
  • Ferrer, Manuel
  • Santero, Eduardo
Resumen del trabajo presentado al Congreso Nacional de Biotecnología, celebrado en Murcia del 18 al 21 de junio de 2017., El dibenzotiofeno (DBT) y sus derivados son compuestos orgánicos reducidos que contienen azufre, relativamente abundantes en crudos de petróleo. El azufre presente en los crudos de petróleo ha de ser eliminado por debajo de un umbral durante su refinado con objeto de evitar en lo posible la lluvia ácida provocada por la combustión de productos que contienen S. Los procesos de hidrodesulfuración eliminan gran parte del S pero el dibenzotiofeno, y sobre todo sus derivados alquilados, son resistentes al tratamiento físico-químico, por lo que se considera muy importante desarrollar procesos de biodesulfuración. Se conoce que el DBT puede ser metabolizado por distintas bacterias utilizando una vía de desulfuración que libera el S de la molécula para que pueda ser asimilado por la bacteria. Se han descrito diversas bacterias capaces de crecer a expensas de DBT como única fuente de S y se conocen los genes responsables de esta capacidad. Sin embargo, no se conoce prácticamente nada sobre la regulación génica de esta ruta de degradación. Realizando rastreos funcionales con una metagenoteca construida de un suelo contaminado con crudo de petróleo, aislamos un clon con actividad oxigenasa cuya secuenciación reveló que contenía los genes codificantes de las 3 enzimas implicadas en la ruta de degradación de DBT, dszABC, así como un cuarto gen codificante de una FMN reductasa que transfiere los electrones a las dos oxigenasas de la ruta, todos juntos en el mismo operón dszEABC. Esta organización es distinta a las descritas previamente, en las que el gen codificante de la reductasa no se encuentra ligado a los otros genes de degradación. A su vez, hemos identificado un gen regulador que es responsable de activar la transcripción de los genes de degradación. El gen regulador, dszR, es un activador transcripcional de promotores dependientes del factor sigma-N, aunque atípico ya que dispone de una región amino terminal reguladora muy pequeña (17 aminoácidos). El operón dispone de un sistema simple y elegantísimo que solo permite la traducción de los genes dszEABC si estos son transcritos desde su propio promotor, evitando una expresión espuria de estos genes desde promotores que puedan existir aguas arriba del operón. En esta comunicación presentaremos nuestros últimos resultados en relación con la regulación de la transcripción del operón dszEABC y la identificación de las secuencias reguladoras implicadas en la activación de la transcripción., El trabajo ha sido financiado por el Ministerio de Economía, Industria y Competitividad (BIO2014-54494-R y PCIN-2014-107), y la Unión Europea (INMARE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determinants and prediction of esterase substrate promiscuity patterns

  • Martínez-Martínez, Mónica
  • Coscolín, Cristina
  • Santiago, Gerard
  • Chow, Jennifer
  • Stogios, Peter J.
  • Bargiela, Rafael
  • Gertler, Christoph
  • Navarro-Fernández, José
  • Bollinger, Alexander
  • Thies, Stephan
  • Méndez-García, Celia
  • Popovic, Ana
  • Brown, Greg
  • Chernikova, Tatyana
  • García-Moyano, Antonio
  • Bjerga, Gro Elin Kjæreng
  • Pérez-García, Pablo
  • Hai, Tran
  • Pozo, Mercedes V. del
  • Stokke, Runar
  • Steen, Ida H.
  • Cui, Hong
  • Xu, Xiaohui
  • Nocek, Boguslaw P.
  • Alcaide, María M.
  • Distaso, Marco
  • Mesa, Victoria
  • Peláez, Ana I.
  • Sánchez, Jesús
  • Buchholz, Patrick C. F.
  • Pleiss, Jürgen
  • Fernández-Guerra, Antonio
  • Glöckner, Frank Oliver
  • Golyshina, Olga V.
  • Yakimov, Michail M.
  • Savchenko, Alexei
  • Jaeger, Karl-Erich
  • Yakunin, Alexander F.
  • Streit, Wolfgang R.
  • Golyshin, Peter N.
  • Guallar, Victor
  • Ferrer, Manuel
  • INMARE Consortium
Esterases receive special attention because of their wide distribution in biological systems and environments and their importance for physiology and chemical synthesis. The prediction of esterases’ substrate promiscuity level from sequence data and the molecular reasons why certain such enzymes are more promiscuous than others remain to be elucidated. This limits the surveillance of the sequence space for esterases potentially leading to new versatile biocatalysts and new insights into their role in cellular function. Here, we performed an extensive analysis of the substrate spectra of 145 phylogenetically and environmentally diverse microbial esterases, when tested with 96 diverse esters. We determined the primary factors shaping their substrate range by analyzing substrate range patterns in combination with structural analysis and protein–ligand simulations. We found a structural parameter that helps rank (classify) the promiscuity level of esterases from sequence data at 94% accuracy. This parameter, the active site effective volume, exemplifies the topology of the catalytic environment by measuring the active site cavity volume corrected by the relative solvent accessible surface area (SASA) of the catalytic triad. Sequences encoding esterases with active site effective volumes (cavity volume/SASA) above a threshold show greater substrate spectra, which can be further extended in combination with phylogenetic data. This measure provides also a valuable tool for interrogating substrates capable of being converted. This measure, found to be transferred to phosphatases of the haloalkanoic acid dehalogenase superfamily and possibly other enzymatic systems, represents a powerful tool for low-cost bioprospecting for esterases with broad substrate ranges, in large scale sequence data sets., C.C. thanks the Spanish Ministry of Economy, Industry and Competitiveness for a Ph.D. fellowship (Grant BES-2015-073829). This project received funding from the European Union’s Horizon 2020 research and innovation program [Blue Growth: Unlocking the potential of Seas and Oceans] under grant agreement no. 634486 (project acronym INMARE). This research was also supported by the European Community Projects MAGICPAH (FP7-KBBE-2009-245226), ULIXES (FP7-KBBE-2010-266473), and KILLSPILL (FP7-KBBE2012-312139) and grants BIO2011-25012, PCIN-2014-107, BIO2014-54494-R, and CTQ2016-79138-R from the Spanish Ministry of Economy, Industry and Competitiveness. The present investigation was also funded by the Spanish Ministry of Economy, Industry and Competitiveness within the ERA NET IB2, grant no. ERA-IB-14-030 (MetaCat), the UK Biotechnology and Biological Sciences Research Council (BBSRC), grant no. BB/M029085/1, and the German Research Foundation (FOR1296). R.B. and P.N.G. acknowledge the support of the Supercomputing Wales project, which is part-funded by the European Regional Development Fund (ERDF) via the Welsh Government. O.V.G. and P.N.G. acknowledge the support of the Centre of Environmental Biotechnology Project funded by the European Regional Development Fund (ERDF) through the Welsh Government. A.Y. and A.S. gratefully acknowledge funding from Genome Canada (2009-OGI-ABC-1405) and the NSERC Strategic Network grant IBN. A.I.P. was supported by the Counseling of Economy and Employment of the Principality of Asturias, Spain (Grant FC-15-GRUPIN14-107). V.G. acknowledges the joint BSC-CRG-IRB Research Program in Computational Biology. The authors gratefully acknowledge financial support provided by the European Regional Development Fund (ERDF)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High throughput screening of esterases, lipases and phospholipases in mutant and metagenomic libraries: A review

  • Peña‐García, Carlina
  • Martínez-Martínez, Mónica
  • Reyes-Duarte, Dolores
  • Ferrer, Manuel
Nowadays, enzymes can be efficiently identified and screened from metagenomic resources or mutant libraries. A set of a few hundred new enzymes can be found using a simple substrate within few months. Hence, the establishment of collections of enzymes is no longer a big hurdle. However, a key problem is the relatively low rate of positive hits and that a timeline of several years from the identification of a gene to the development of a process is the reality rather than the exception. Major problems are related to the time-consuming and cost intensive screening process that only very few enzymes finally pass. Accessing to the highest possible enzyme and mutant diversity by different, but complementary approaches is increasingly important. The aim of this review is to deliver state-of-art status of traditional and novel screening protocols for targeting lipases, esterases and phospholipases of industrial relevance, and that can be applied at high throughput scale (HTS) for at least 200 distinct substrates, at a speed of more than 105 - 108 clones/day. We also review fine-tuning sequence analysis pipelines and in silico tools, which can further improve enzyme selection by an unprecedent speed (up to 1030 enzymes). If the hit rate in an enzyme collection could be increased by HTS approaches, it can be expected that also the very further expensive and time-consuming enzyme optimization phase could be significantly shortened, as the processes of enzyme-candidate selection by such methods can be adapted to conditions most likely similar to the ones needed at industrialscale., The authors gratefully acknowledge the financial support provided by the European Community project MAMBA (FP7-KBBE-2008-226977), MAGICPAH (FP7-KBBE- 2009-245226), ULIXES (FP7-KBBE-2010-266473), and KILLSPILL (FP7-KBBE-2012-312139), and by Mexican Council CONACYT CB-2008-01 (101784). This project has also received funding from the European Union’s Horizon 2020 research and innovation program [Blue Growth: Unlocking the potential of Seas and Oceans] under grant agreement No [634486]. This work was further funded by grants PCIN-2014-107 (within the ERA NET-IB2 program),BIO2011-25012 and BIO2014-54494-R from the Spanish Ministry of Economy and Competitiveness. The authors gratefully acknowledge the financial support provided by the European Regional Development Fund (ERDF). C.P-G. thanks Doctoral Fellowship CONACYT no. 372746. We thank Rafael Bargiela for his excellent support for the preparation of Fig. (1)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Throughput Screening of Esterases, Lipases and Phospholipases in Mutant and Metagenomic Libraries: A Review

  • Peña‐García, Carlina
  • Martínez-Martínez, Mónica
  • Reyes-Duarte, Dolores
  • Ferrer, Manuel
[EN] Nowadays, enzymes can be efficiently identified and screened from metagenomic resources or mutant libraries. A set of a few hundred new enzymes can be found using a simple substrate within few months. Hence, the establishment of an enzymes collection is no longer a big hurdle. However, a key problem is the relatively low rate of positive hits and that a timeline of several years from the identification of a gene to the development of a process is the reality rather than the exception. Major problems are related to the time-consuming and cost-intensive screening process that only very few enzymes finally pass. Accessing to the highest possible enzyme and mutant diversity by different, but complementary approaches is increasingly important. The aim of this review is to deliver state-of-art status of traditional and novel screening protocols for targeting lipases, esterases and phospholipases of industrial relevance, and that can be applied at high throughput scale (HTS) for at least 200 distinct substrates, at a speed of more than 105 ¿ 108 clones/day. We also review fine-tuning sequence analysis pipelines and in silico tools, which can further improve enzyme selection by an unprecedent speed (up to 1030 enzymes). If the hit rate in an enzyme collection could be increased by HTS approaches, it can be expected that also the very further expensive and time-consuming enzyme optimization phase could be significantly shortened, as the processes of enzyme-candidate selection by such methods can be adapted to conditions most likely similar to the ones needed at industrial scale., The authors gratefully acknowledge the financial support provided by the European Community project MAMBA (FP7-KBBE-2008-226977), MAGICPAH (FP7-KBBE-2009 245226), ULIXES (FP7-KBBE-2010-266473), and KILLSPILL (FP7-KBBE-2012-312139), and by Mexican Council CONACYT CB-2008-01 (101784). This project has also received funding from the European Union’s Horizon 2020 research and innovation program [Blue Growth: Unlocking the potential of Seas and Oceans] under grant agreement No [634486]. This work was further funded by grants PCIN-2014-107 (within the ERA NET-IB2 program), BIO2011-25012 and BIO2014-54494-R from the Spanish Ministry of Economy and Competitiveness. The authors gratefully acknowledge the financial support provided by the European Regional Development Fund (ERDF). C.P-G. thanks Doctoral Fellowship CONACYT no. 372746., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled manipulation of enzyme specificity through immobilization-induced flexibility constraints

  • Coscolín, Cristina
  • Beloqui, Ana
  • Martínez-Martínez, Mónica
  • Bargiela, Rafael
  • Santiago, Gerard
  • Blanco Martín, Rosa María
  • Delaittre, Guillaume
  • Márquez Álvarez, Carlos
  • Ferrer, Manuel
It is thought that during immobilization enzymes, as dynamic biomolecules, may become distorted and this may alter their catalytic properties. However, the effects of different immobilization strategies on enzyme rigidity or flexibility and their consequences in specificity and stereochemistry at large scale has not been yet clearly evaluated and understood. This was here investigated by using as model an ester hydrolase, isolated from a bacterium inhabiting a karstic lake, with broad substrate spectrum (72 esters being converted; 61.5 U mg−1 for glyceryl tripropionate) but initially non-enantiospecific. We found that the enzyme (7 nm × 4.4 nm × 4.2 nm) could be efficiently ionic exchanged inside the pores (9.3 nm under dry conditions) of amino-functionalized ordered mesoporous material (NH2-SBA-15), achieving a protein load of 48 mg g−1, and a specific activity of 4.5 ± 0.1 U mg−1. When the enzyme was site-directed immobilized through His interaction with an immobilized cationon the surface of two types of magnetic micro-particles through hexahistidine-tags, protein loads up to 10.2 μg g−1 and specific activities of up to 29.9 ± 0.3 U mg−1, were obtained. We found that ionically exchanged enzyme inside pores of NH2-SBA-15 drastically narrowed the substrate range (17 esters), to an extent much higher than ionically exchanged enzyme on the surface of magnetic micro-particles (up to 61 esters). This is attributed to differences in surface chemistry, particle size, and substrate accessibility to the active site tunnel. Our results also suggested, for the first time, that immobilization of enzymes in pores of similar size may alter the enzyme structures and produce enzyme active centers with different configuration which promote stereochemical conversions in a manner different to those arising from surface immobilization, where the strength of the ionic exchange also has an influence. This was shown by demonstrating that when the enzyme was introduced inside pores with a diameter (under dry conditions) slightly higher than that of the enzyme crystal structure a biocatalyst enantiospecific for ethyl (R)-4-chloro-3-hydroxybutyrate was produced, a feature not found when using wider pores. By contrast, immobilization on the surface of ferromagnetic microparticles produced selective biocatalysts for methyl (S)-(+)-mandelate or methyl (S)-lactate depending on the functionalization. This study illustrates the benefits of extensive analysis of the substrate spectra to better understand the effects of different immobilization strategies on enzyme flexibility/rigidity, as well as substrate specificity and stereochemistry. Our results will help to design tunable materials and interfaces for a controlled manipulation of specificity and to transform non-enantiospecific enzymes into stereo-chemically substrate promiscuous biocatalysts capable of converting multiple chiral molecules. © 2018 The Author(s), This project received funding from the European Union’s Horizon 2020 research and innovation program Blue Growth: Unlockingthe potential of Seas and Oceans under grant agreement no. 634486 (project acronym INMARE). This research was also supported by the grants PCIN-2014-107 (within ERA NET IB2 grant nr. ERA-IB-14-030 - MetaCat), PCIN-2017-078 (within the ERA-MarineBiotech grant ProBone), BIO2014-54494-R, MAT2016-77496-R, BIO2017-85522-R, and CTQ2016-79138-R from the Spanish Ministry of Economy, Industry and Competitiveness. A.B. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness (MAT2017-88808- R grant), María de Maeztu Units of Excellence Programme (MDM-2016- 0618), and the Diputación de Guipúzcoa for current funding in the frame of Gipuzkoa Fellows program. G.D. thanks the German Federal Ministry of Education and Research (BMBF, Grant No. 031A095C) for funding in the frame of the Molecular Interaction Engineering program (Biotechnologie 2020+). The authors gratefully acknowledge financial support provided by the European Regional Development Fund (ERDF). C.C. thanks the Spanish Ministry of Economy, Industry and Competitiveness for a PhD fellowship (Grant BES-2015-073829)., Supplementary material related to this article can be found, in the online version, at doi: https://doi.org/10.1016/j.apcata.2018.08.003, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protocol for obtaining polyhydroxyalkanoates from microbial cultures: Production, quantification, and analytical assays

  • Manoli, Maria-Tsampika
  • Hernández-Herreros, Natalia
  • Rivero-Buceta, Virginia
  • Rodríguez-Izquierdo, Alberto
  • Prieto, María Auxiliadora
Polyhydroxyalkanoates (PHAs), a family of natural bacterial biodegradable bio polymers, constitute a promising alternative to conventional plastics. Here, we present a protocol to monitor bacterial growth and biopolymer accumulation in shaken flasks using two model bacteria, Pseudomonas putida KT2440 and Cu priavidus necator H16. We also describe steps to achieve high cell-density cul tures in benchtop bioreactors using bioprocess engineering. Typical perfor mance metrics include biomass concentrations of 6.5–7 g cell dry weight (CDW)/L and PHA titers of 4.2–4.5 g/L for P. putida and 3.5 g/L for C. necator. We then detail procedures for downstream processing, assessing monomer composition, and determining its thermal properties., This research received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement nos. 760994 (Engicoin), 870294 (MixUp), 101000733 (PROMICON), 101081782 (DeCypher), and 101081776 (AgriLoop) and the European Union and the Circular Bio-based Europe Joint Undertaking grant agreement no. 101156032 (ReBioCycle). This work was supported by the CSIC Interdisciplinary Thematic Platform (PTI+) Sustainable Plastics towards a Cir cular Economy (PTI-Susplast), OPENVIRO (PID2023-146557OB-C21), and NOVELPOL (202320E107)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Urban art in North-eastern Africa: The painter Keflä Haylä

  • Fernández, Víctor M.
  • Ortiz García, Carmen
[EN] An introduction is presented to the urban art, mostly of painted advertisements on public buildings, in Western and Northern Ethiopia, with a short reference to the rare cases observed in nearby Sudan. It is also an opportunity to consider some of the folk paintings housed in the Asosa Ethnographic Museum (Benishangul-Gumuz, Western Ethiopia) re-installed by the authors in 2006-2009. Finally, a painter of this type of art, as well as funeral portraits and traditional religious art, the Ethiopian Keflä Haylä, was interviewed in Asosa and a summary of his life and outstanding work in various contexts is also presented., [ES] Se presenta una introducción al arte popular urbano, sobre todo de anuncios pintados en edificios de uso público, en Etiopía occidental y septentrional, junto con algunos de los raros casos observados en el cercano Sudán. Se aprovecha para presentar también algunas pinturas populares custodiadas en el Museo Etnográfico de Asosa (Benishangul-Gumuz, Etiopía Occidental) reinstalado por los autores en 2006-2009. Finalmente, un pintor de este tipo de arte, así como de temas religiosos tradicionales y retratos funerarios, el etíope Keflä Haylä, fue entrevistado en Asosa sobre su vida y se presenta aquí un resumen de ella y algunas de sus obras más sobresalientes en varios contextos, The fieldwork in Sudan and Ethiopia has been funded by the Ministry of Culture of Spain (General Directorate of Fine Arts and Cultural Heritage, Archaeological Excavations Abroad Program, project “Survey of the Blue Nile Basin in Western Ethiopia,” Grant 107/1I/06/BL9), and the Spanish Agency of International Cooperation to Development of the Ministry of Foreign Affairs of Spain (“Consolidation and Valorization of Iberian Jesuit Monuments of the 17th Century at Lake Tana, Ethiopia,” 08-CAP2-0869)., This article is also part of the research project “Science, Race, and Visual Colonialism (Visualrace)” (PID2020-112730GB-100. National Re-search Plan. Ministry of Science. 2021-2023. Directors: Miguel-Ángel Puig-Samper and José-María López), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evolutionary dynamics of the repeatome explains contrasting differences in genome sizes and hybrid and polyploid origins of grass loliinae lineages

  • Moreno-Aguilar, M.
  • Inda, L. A.
  • Sánchez-Rodríguez, A.
  • Arnelas, I.
  • Catalán, P.
The repeatome is composed of diverse families of repetitive DNA that keep signatures on the historical events that shaped the evolution of their hosting species. The cold seasonal Loliinae subtribe includes worldwide distributed taxa, some of which are the most important forage and lawn species (fescues and ray-grasses). The Loliinae are prone to hybridization and polyploidization. It has been observed a striking two-fold difference in genome size between the broad-leaved (BL) and fine-leaved (FL) Loliinae diploids and a general trend of genome reduction of some high polyploids. We have used genome skimming data to uncover the composition, abundance, and potential phylogenetic signal of repetitive elements across 47 representatives of the main Loliinae lineages. Independent and comparative analyses of repetitive sequences and of 5S rDNA loci were performed for all taxa under study and for four evolutionary Loliinae groups Loliinae, Broad-leaved (BL), Fine-leaved (FL), and Schedonorus lineages]. Our data showed that the proportion of the genome covered by the repeatome in the Loliinae species was relatively high (average ~ 51.8%), ranging from high percentages in some diploids (68.7%) to low percentages in some high-polyploids (30.7%), and that changes in their genome sizes were likely caused by gains or losses in their repeat elements. Ty3-gypsy Retand and Ty1-copia Angela retrotransposons were the most frequent repeat families in the Loliinae although the relatively more conservative Angela repeats presented the highest correlation of repeat content with genome size variation and the highest phylogenetic signal of the whole repeatome. By contrast, Athila retrotransposons presented evidence of recent proliferations almost exclusively in the Lolium clade. The repeatome evolutionary networks showed an overall topological congruence with the nuclear 35S rDNA phylogeny and a geographic-based structure for some lineages. The evolution of the Loliinae repeatome suggests a plausible scenario of recurrent allopolyploidizations followed by diploidizations that generated the large genome sizes of BL diploids as well as large genomic rearrangements in highly hybridogenous lineages that caused massive repeatome and genome contractions in the Schedonorus and Aulaxyper polyploids. Our study has contributed to disentangling the impact of the repeatome dynamics on the genome diversification and evolution of the Loliinae grasses. Copyright © 2022 Moreno-Aguilar, Inda, Sánchez-Rodríguez, Arnelas and Catalán.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Phylogenomics and Systematics of Overlooked Mesoamerican and South American Polyploid Broad-Leaved Festuca Grasses Differentiate F. sects. Glabricarpae and Ruprechtia and F. subgen. Asperifolia, Erosiflorae, Mallopetalon and Coironhuecu (subgen. nov.)

  • Moreno Aguilar, María Fernanda
  • Inda, Luís. A.
  • Sánchez Rodríguez, Aminael
  • Catalán, Pilar
  • Arnelas, Itziar
Allopolyploidy is considered a driver of diversity in subtribe Loliinae. We investigate the evolution and systematics of the poorly studied Mesoamerican and South American polyploid broad-leaved Festuca L. species of uncertain origin and unclear taxonomy. A taxonomic study of seven diagnostic morphological traits was conducted on a representation of 22 species. Phylogenomic analyses were performed on a representation of these supraspecific taxa and all other Loliinae lineages using separate data from the entire plastome, nuclear rDNA 45S and 5S genes, and repetitive DNA elements. F. subgen. Mallopetalon falls within the fine-leaved (FL) Loliinae clade, whereas the remaining taxa are nested within the broad-leaved (BL) Loliinae clade forming two separate Mexico–Central–South American (MCSAI, MCSAII) lineages. MCSAI includes representatives of F. sect. Glabricarpae and F. subgen. Asperifolia plus F. superba, and MCSAII of F. subgen. Erosiflorae and F. sect. Ruprechtia plus F. argentina. MCSAII likely had a BL Leucopoa paternal ancestor, MCSAI and MCSAII a BL Meso-South American maternal ancestor, and Mallopetalon FL, American I–II ancestors. Plastome vs. nuclear topological discordances corroborated the hybrid allopolyploid origins of these taxa, some of which probably originated from Northern Hemisphere ancestors. The observed data indicate rapid reticulate radiations in the Central–South American subcontinent. Our systematic study supports the reclassification of some studied taxa in different supraspecific Festuca ranks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Muscle activation during gait in unilateral transtibial amputee patients with prosthesis: The influence of the insole material density

  • Sarroca, N.
  • Luesma Bartolomé, M.J.
  • Valero, J.
  • Deus, J.
  • Casanova, J.
  • Lahoz, M.
Background: Walking is a complex process that is highly automated and efficient. This knowledge is essential for the study of pathological gait. The amputation of lower limbs involves new biomechanical load and gait patterns, and injuries due to overload or disuse may occur. The objective of this study is to assess muscle activation as part of the gait in unilateral transtibial amputee patients with prosthesis, at different speeds and with different plantar supports. Method: Included in the sample were 25 people with amputation and 25 control participants. Muscle activation was evaluated in both groups by means of surface electromyography (EMG) under normal and altered conditions. Results: Control participants did not show statistically significant differences (p > 0.05) between their muscle groups, irrespective of support and speed. However, people with amputation did show differences in muscle activity in the quadriceps, all of which occurred at the highest speeds, irrespective of support. In the analysis between groups, significant differences (p < 0.05) were obtained between the leg of the amputee patient and the leg of the control participant, all of them in the quadriceps, and at speeds 3 and 4, regardless of the insole used. Conclusions: Participants with unilateral transtibial amputation carry out more quadriceps muscle activity during gait compared to the control group.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Community Supported Agriculture (CSA) as resilient socio-economic structures: the role of collaboration and public policies in Brazil and Spain

  • González Azcárate, Mario|||0000-0001-9599-2564
  • Lara Silva, Vivian
  • Cruz Macein, José Luis
  • López García, Daniel|||0000-0003-2265-880X
  • Bardaji de Azcarate, Isabel|||0000-0002-6122-525X
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Survival curves and behavioral profiles of female 3xTg-AD mice surviving to 18-months of age as compared to mice with normal aging

  • Torres-Lista, Virginia|||0000-0002-0603-5111
  • De la Fuente, Mónica
  • Gimenez-Llort, Lydia|||0000-0002-4091-489X
New evidence reveals a high degree of heterogeneity in Alzheimer's disease (AD) clinical and temporal patterns, supporting the existence of several subgroups of patients. Prognosticators of end-of-life dementia specific to elderly patients are necessary to address this heterogeneity. Among 3xTg-AD mice, a widely-used model for AD, a very small number of animals overcome advanced neuropathological stages of disease beyond 18 months of age. They are usually females, which reach longevity in spite of worse neuropathological status as compared to males (the morbidity/mortality paradox). We posit that 3xTg-AD long-term survivors could serve to model end-of-life dementia but also aware about the mortality selection bias. In the present study, we performed behavioral and functional phenotype in long-term survivors, 18-month-old female 3xTg-AD mice and age-matched wildtype undergoing normal aging. Animals were followed up until natural death to correlate survival with phenotype assessments. Strong similarity of their behavioral profiles in all the variables analyzed (e.g. reflexes, sensorimotor functions, locomotion, exploration, emotionality, and anxiety-like behaviors) was found, with the exception of memory impairment, which was a salient trait in old 3xTg-AD survivors. The two groups showed similar mean life expectancy and had behavioral correlates among lifespan, neophobia and long-term memory in common, with some distinctions in 3xTg-AD, supporting recent studies in end-of-life patients. In spite of the small sample size, this brief report presents an interesting scenario to further study heterogeneity and survival in Alzheimer's disease. 3xTg-AD survivors may be a model to gain insight into the frailty/survival paradigm in normal and pathological aging.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Plant ammonium sensitivity is associated with external pH adaptation, repertoire of nitrogen transporters, and nitrogen requirement

  • Rivero Marcos, Mikel
  • Lasa Larrea, Berta
  • Neves, Tomé
  • Zamarreño, Ángel M.
  • García-Mina, José María
  • García Olaverri, Carmen
  • Aparicio Tejo, Pedro María
  • Cruz, Cristina
  • Ariz Arnedo, Idoia
Modern crops exhibit diverse sensitivities to ammonium as the primary nitrogen source, influenced by environmental factors such as external pH and nutrient availability. Despite its significance, there is currently no systematic classification of plant species based on their ammonium sensitivity. We conducted a meta-analysis of 50 plant species and present a new classification method based on the comparison of fresh biomass obtained under ammonium and nitrate nutrition. The classification uses the natural logarithm of the biomass ratio as the size effect indicator of ammonium sensitivity. This numerical parameter is associated with critical factors for nitrogen demand and form preference, such as Ellenberg indicators and the repertoire of nitrogen transporters for ammonium and nitrate uptake. Finally, a comparative analysis of the developmental and metabolic responses, including hormonal balance, is conducted in two species with divergent ammonium sensitivity values in the classification. Results indicate that nitrate has a key role in counteracting ammonium toxicity in species with a higher abundance of genes encoding NRT2-type proteins and fewer of those encoding the AMT2-type proteins. Additionally, the study demonstrates the reliability of the phytohormone balance and methylglyoxal content as indicators for anticipating ammonium toxicity. This study emphasizes the importance of ecophysiological requirements and the repertoire of nitrogen transporters in understanding plant sensitivity to ammonium, and enhances our knowledge of plant nitrogen nutrition., MR-M received funding from a PhD fellowship through the Public University of Navarra. IA was supported by an MCIN RyC Programme MCIN/AEI/10.13039/501100011033 and by the 'European Union Next Generation EU/PRTR' under grant no. RYC2021-032345-I. This work was supported by the AEI under grant no. PID2019-107463RJ-I00/AEI/10.13039/501100011033, and the Regional Research and Development Programme of the Government of Navarre (calls 2019 and 2020, projects NitroHealthy2, PC068, and HORTA0,0; PC106-107). Open Access funding was provided by Universidad Publica de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Use of nitrate as a metabolic modulator in ammonium-fed leafy vegetable production

  • Calleja Satrustegui, Aitziber
Global agriculture's dependence on nitrogen-based fertilizers and high soil nitrification rates causes excessive nitrate accumulation in soil and plants, leading to environmental and health problems. Nitrate accumulation in plans is especially notable in nitratepreferring leafy vegetables, frequently exceeding European Union (EU) food safety limits. Ammonium-based fertilization is a promising alternative to lower nitrate content in edible tissues. However, ammonium as the sole nitrogen source is toxic to most crops, particularly to nitrate-preferring species like spinach (Spinacia oleracea L.) and other leafy vegetables. This toxicity, among other, is linked to disruptions in central carbon metabolism, promoting the synthesis of methylglyoxal (MG), a toxic compound. It is known that millimolar levels of nitrate can alleviate ammonium toxicity. However, the mechanisms by which alleviation also could occur at non-nutritive doses (i.e., micromolar range) remain poorly explored. Furthermore, the specific function of micromolar nitrate in regulating ammonium-induced carbon overflow in primary metabolism is not yet fully elucidated. This thesis hypothesized that the co-supply of small, micromolar concentrations of nitrate could alleviate ammonium toxicity while maintaining the Benefit of low nitrate content in edible tissues. We further proposed that this alleviation is driven by a specific regulatory action on carbon metabolism, likely mediated by nitric oxide (NO) derivatives (like GSNO) through redox-based post-translational modifications (PTMs), preventing MG synthesis. The general aim of this thesis was to bridge the gap between fundamental knowledge of the nitrate-ammonium interaction and its practical application in agriculture. We sought to gain mechanistic insights into how nitrate regulates carbon metabolism to inform the formulation of improved, ammonium-dominant nutrient solutions for the comercial production of leafy vegetables with reduced nitrate content. Our findings confirm that at micromolar concentrations, nitrate is rapidly translocated to the leaves where it exerts a regulatory function. This micromolar supply triggers a reorganization of carbon flow, effectively redirect carbon to different metabolic pathways, avoiding the spontaneous synthesis of toxic MG. A key target of this regulatory action was identified as the photosynthetic enzyme ABtype glyceraldehyde-3-phosphate dehydrogenase (AB-GAPDH), a crucial component of central carbon metabolism. Our data established that this regulatory mechanism is posttranslational, as no changes in AB-GAPDH transcript or protein abundance were detected. Instead, the enzyme’s activity is modulated through redox-dependent PTMs. Consistent with our initial hypothesis, we observed that the levels of GSNO were significantly higher in ammonium-fed plants supplemented with micromolar nitrate compared to those without, strongly suggesting that S-nitrosation is the likely (though yet to be definitively confirmed) mechanism of this redox-based regulation. While the micromolar nitrate supply provided an important mechanistic insight, we found it was insufficient to sustain agronomically acceptable yields in advanced-stage leafy vegetables on its own. This demonstrated that a higher, albeit still minimized, nitrate content is required for practical cultivation. We therefore explored different nitrate-to-ammonium ratios to balance yield, stress tolerance, and nitrate accumulation. For some leafy vegetables like rocket (Eruca sativa Mill.) and borage (Borago officinalis L.), a 3.33:6.66 (mM) nitrate-to-ammonium ratio emerged as the optimal solution. For the highly ammonium-sensitive spinach, however, none of the tested ratios simultaneously achieved the dual objective of lowering nitrate accumulation while maintaining acceptable yields. This emphasises the importance of tailoring fertilisation strategies to the specific physiology of each crop. This thesis provides a novel knowledge on nitrate’s function as a post-translational regulator of central carbon metabolism in the context of ammonium nutrition. This discovery opens new perspectives for applied agriculture. It provides a fundamental scientific basis for the formulation of ammonium-dominant fertilizers that incorporate low levels of nitrate not just as a nutrient, but as a critical regulator. This approach paves the way for the commercial production of leafy vegetables that are high-yield, high-quality and compliant with EU food safety standard for nitrate content., This thesis was funded by the following grants: NITROSYM. Re-evaluation of organic and inorganic nitrogen fertilizer application on symbiotic nitrogen fixation in legumes: sustainable agriculture and circular economy, funded by the Spanish Ministry of Science and Innovation, State Investigation Agency (AEI) and European Union NextGenerationEU/PRTR. Project reference: TED2021-130111B-I00. Project date: 01/12/2022-31/05/2025; BIOESTIMULAN. Design and study of the use of natural biostimulants of metabolic or microbial origin products to improve nitrogen use efficiency in plant species with agronomic interest, funded by the Government of Navarre. Project reference: PC108-019 BIOESTIMULAN. Project date: 01/12/2021-30/11/2024; MODULATransProt. Improved ammonium nutrition in leafy vegetables by modulation of ammonium transport proteins under nitrogen-sufficient conditions, funded by the Spanish Ministry of Science and Innovation. Project reference: PID2019-107463RJ-I00. Project date: 01/10/2020-30/09/2023; HORTA 0,0. Diseño y manejo de moduladores del metabolismo nitrogenado vegetal para la reducción del contenido de nitrato en hortalizas, funded by the Government of Navarre. Project reference: PC106-107 HORTA 0,0. Project date: 01/12/2019-30/11/2022; Aitziber Calleja Satrustegui was awarded a predoctoral grant funded by the Public University of Navarre (UPNA) and Santander Bank during the thesis performance. Grant resolution: 2659/2021. Grant date:15/01/2022-14/01/2026; The research stay at the University of Bolonia (UniBo, date: 01/09/2023-15/12/2023) was funded by European Union with Erasmus+ grant (grant resolution: 1212/2022) and the Public University of Navarre with a predoctoral mobility grant (grant resolution: 972/2023)., Programa de Doctorado en Agrobiología Ambiental (RD 99/2011), Ingurumen Agrobiologiako Doktoretza Programa (ED 99/2011)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Development of a molecularly imprinted membrane for selective, high-sensitive, and on-site detection of antibiotics in waters and drugs: Application for sulfamethoxazole

  • El Hani, Ouarda
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Digua, Khalid
  • Amine, Aziz
  • Cubillana Aguilera, Laura
Sulfonamides are among the widespread bacterial antibiotics. Despite this, their quick emergence constitutes a serious problem for ecosystems and human health. Therefore, there is an increased interest in developing relevant detection method for antibiotics in different matrices. In this work, a straightforward, green, and cost-effective protocol was proposed for the preparation of a selective molecularly imprinted membrane (MIM) of sulfamethoxazole (SMX), a commonly used antibiotic. Thus, cellulose acetate was used as the functional polymer, while polyethylene glycol served as a pore-former. The developed MIM was successfully characterized through scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The MIM was used as a sensing platform in conjunction with a smartphone for optical readout, enabling on-site, selective, and highly sensitive detection of SMX. In this way, a satisfactory imprinting factor of around 3.6 and a limit of detection of 2 ng mL−1 were reached after applying response surface methodologies, including Box-Behnken and central composite designs. Besides, MIM demonstrated its applicability for the accurate and selective detection of SMX in river waters, wastewater, and drugs. Additionally, the MIM was shown to be a valuable sorbent in a solid-phase extraction protocol, employing a spin column setup that offered rapid and reproducible results. Furthermore, the developed sensing platform exhibited notable regeneration properties over multiple cycles and long shelf-life in different storage conditions. The newly developed methodology is of crucial importance to overcome the limitations of classical imprinting polymers. Furthermore, the smartphone-based platform was used to surpass the typically expensive and complicated methods of detection.