Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Functional expression of inwardly rectifying and ATP-sensitive potassium channels in human pulmonary artery smooth muscle and endothelial cells.

  • Barreira, Bianca
  • Morales Cano, Daniel
  • Moreno Gutiérrez, Laura
  • de Olaiz, Beatriz
  • Adão, Rui
  • Cogolludo Torralba, Ángel Luis
  • Pérez Vizcaíno, Francisco
  • Sancho González, María
The resting membrane potential (V) of vascular cells is a key determinant of arterial tone, integrating multiple ionic conductances to control smooth muscle contractility and endothelial signalling. In the human pulmonary circulation, the specific K channels responsible for setting the V of smooth muscle cells (SMCs) and endothelial cells (ECs) remain incompletely defined. This study investigated whether inwardly rectifying (Kir2) and ATP-sensitive (K) K channels are functionally expressed in native human pulmonary artery (PA) SMCs and ECs and assessed their contribution to vascular tone. Combining patch-clamp electrophysiology, immunofluorescence and wire myography, we evaluated channel expression and function in freshly isolated PASMCs and PAECs, and intact PAs. Kir2 channels were identified by Ba-sensitive inward currents with a characteristic rectification profile, supported by immunolabelling of Kir2.1 and Kir2.2 subunits. Functionally, BaCl induced concentration-dependent contractions of PA rings and significantly attenuated acetylcholine-evoked, endothelium-dependent relaxation, revealing a tonic vasodilatory role for Kir2 channels. K currents, activated by pinacidil and blocked by glibenclamide and PNU-37883A, were also observed in PASMCs and PAECs, consistent with immunodetection of Kir6.1 and SUR2 subunits. In isolated PAs, pinacidil elicited concentration-dependent vasodilatation, which was significantly reduced by K channel blockade. Collectively, these findings demonstrate for the first time the functional presence of Kir2 and K channels in native human pulmonary vascular cells, and their modulatory role on V and arterial tone. These channels emerge as key electro-metabolic regulators of pulmonary vascular function and promising therapeutic targets in diseases characterized by V dysregulation, such as pulmonary arterial hypertension. KEY POINTS: Inwardly rectifying (Kir2) K channels are key regulators of the resting membrane potential (V) in different vascular cell types across multiple vascular beds, whereas ATP-sensitive (K) K channels detect changes in the metabolic state of vascular cells and translate these changes into V modulation. Despite their well-established physiological relevance, a comprehensive characterization of Kir2 and K channels in freshly isolated human pulmonary vascular cells - particularly within the endothelium - remains lacking. Our study provides compelling evidence for the functional expression of Kir2 and K channels in native human pulmonary arterial smooth muscle and endothelial cells, demonstrating their contribution to V regulation and pulmonary vascular tone at rest and in response to specific stimuli.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BIM Requirements in the Spanish Public Tender-Analysis of Adoption in Construction Contracts

  • Pérez-García, Ana
  • Martín-Dorta, Norena
  • Aranda Domingo, José Ángel|||0000-0001-6457-1150
[EN] The use of Building Information Modeling (BIM) is increasingly widespread within the Architecture, Engineering, Construction & Operations (AECO) sector. BIM allows the construction of a digital scale model of the asset to be built, ensuring the early detection of conflicts and interferences, enabling communication between the different participant agents, and facilitating the processes in the maintenance and management phase. Studies on the subject are many and varied. However, very few works refer to the inclusion of BIM in the public procurement stage, one of the most complex and competitive stages within the asset's life cycle. A bibliographic review has been conducted about the BIM situation in the AECO sector contracts, the existing problems and the possible solutions to implement. In the specific field of public procurement, Spain has made great progress, especially at the regional level. During 2020, a total of 440 tenders with BIM requirements were published, with an investment volume of EUR 752 million, which represents an increase of 230% compared to 2017. The aim of this research is to analyze the Spanish public procurement, highlighting the progress made so far in the implementation of this technology, as well as to develop a proposal of BIM requirements that, in general, could be used as a reference for tenders of the AECO sector in the country. With this objective, a selection of twenty relevant public tenders is made, covering both the building and infrastructure fields. The requirements address areas such as: BIM uses, BIM deliverables, model structure, Level of Development, Common Data Environment, classification systems, standards or quality control., This research was funded by Contract with Cabildo de Tenerife (Spain) and Agreement with City Hall of Santa Cruz de Tenerife (Spain): ULLCT2101; ULLASC2102. The work of Ana Perez-Garcia was funded by the Predoctoral Program for Training of Research Personnel of the Canary Islands Government Agencia Canaria de Investigacion, Innovacion y Sociedad de la Informacion (ACIISI), co-financed with the European Social Fund (contract number TESIS2021010090).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Face Video Competition

  • Poh, N
  • Chan, CH
  • Kittler, J
  • Marcel, S
  • Mc Cool, C
  • Rua, EA
  • Alba Castro, JL
  • Villegas, Mauricio
  • Struc, V
  • Pavesic, N
  • Salah, AA
  • Fang, H
  • Costen, N
  • Paredes Palacios, Roberto
Person recognition using facial features, e.g., mug-shot images, has long been used in identity documents. However, due to the widespread use of web-cams and mobile devices embedded with a camera, it is now possible to realise facial video recognition, rather than resorting to just still images. In fact, facial video recognition offers many advantages over still image recognition; these include the potential of boosting the system accuracy and deterring spoof attacks. This paper presents the first known benchmarking effort of person identity verification using facial video data. The evaluation involves 18 systems submitted by seven academic institutes., The work of NPoh is supported by the advanced researcher fellowship PA0022121477of the Swiss NSF; NPoh, CHC and JK by the EU-funded Mobio project grant IST-214324; NPC and HF by the EPSRC grants EP/D056942 and EP/D054818; VS andNP by the Slovenian national research program P2-0250(C) Metrology and Biomet-ric System, the COST Action 2101 and FP7-217762 HIDE; and, AAS by the Dutch BRICKS/BSIK project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A charging station planning model considering electric bus aggregators

  • Clairand, Jean-Michel
  • González-Rodríguez, Mario
  • Cerdeño, Irvin
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Many governments are pushing for cleaner transportation. In particular, public transportation allows massive transportation of passengers, but it remains highly polluting, especially in high elevation cities. Thus, the progressive introduction of electric buses (EBS) will allow mitigating these environmental concerns. However, some technological problems must be addressed considering the massive penetration of EBs. The lack of flexibility and the time connection of scheduling for public transit make EBS harder than internal combustion ones. This work studies the impact of charging EBs at the bus station and suggests a new way to take EB aggregators into account to reduce energy costs while fulfilling grid restrictions. In addition, to find a different number of charging spots to be installed, a scheduling analysis is conducted., This works belongs to the projects IEA.JCG.20.01 and SIS.MGR.21.01 from Universidad de las Americas - Ecuador. The authors would like to thank Paulo Guerra-Teran from Universidad de las Americas - Ecuador for the fruitful discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An evaluation of video-to-video face verification

  • Poh, Norman
  • Chan, Chi Ho
  • Kittler, Josef
  • Marcel, Sébastien
  • McCool, Christopher
  • Aragonés Rúa, Enrique
  • Alba Castro, Jose Luis
  • Villegas, Mauricio
  • Struc, Vitomir
  • Pavesic, Nikola
  • Salah, Albert Ali
  • Fang, Hui
  • Costen, Nicholas
  • Paredes Palacios, Roberto
[EN] Person recognition using facial features, e.g., mug-shot images, has long been used in identity documents. However, due to the widespread use of web-cams and mobile devices embedded with a camera, it is now possible to realize facial video recognition, rather than resorting to just still images. In fact, facial video recognition offers many advantages over still image recognition; these include the potential of boosting the system accuracy and deterring spoof attacks. This paper presents an evaluation of person identity verification using facial video data, organized in conjunction with the International Conference on Biometrics (ICB 2009). It involves 18 systems submitted by seven academic institutes. These systems provide for a diverse set of assumptions, including feature representation and preprocessing variations, allowing us to assess the effect of adverse conditions, usage of quality information, query selection, and template construction for video-to-video face authentication., Manuscript received September 30, 2009; revised August 18, 2010; accepted August 23, 2010. Date of publication September 20, 2010; date of current version November 17, 2010. The work of N. Poh was supported by the Advanced Researcher Fellowship PA0022 121477 of the Swiss NSF. The work of N. Poh, C. H. Chan, and J. Kittler was supported by the EU-funded Mobio project grant IST-214324. The work of N. Costen and H. Fang was supported by the EPSRC Grant EP/D056942 and Grant EP/D054818. The work of N. Pavesic and V. Struc was supported by the Slovenian National Research Program P2-0250(C) Metrology and Biometric System, the COST Action 2101 and FP7-217762 HIDE. The work of E. A. Rua was supported by the Spanish Project TEC2008-05894. The work of M. Villegas and R. Paredes was supported by the Spanish MEC/MICINN under the MIPRCV "Consolider Ingenio 2010" program (CSD2007-00018). The work of A. A. Salah was supported by the Dutch BRICKS/BSIK project. The associate editor coordinating the review of this manuscript and approving it for publication was Dr. Patrick J. Flynn. N. Poh, C. H. Chan, and J. Kittler are with the Centre for Vision, Speech and Signal Processing (CVSSP), School of Electronics and Physical Sciences, University of Surrey, Guildford, GU2 7XH, Surrey, U. K. (e-mail: n.poh@surrey.ac.uk; normanpoh@ieee.com).
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Comparison between cold-stored platelets treated with riboflavin andUV light versus untreated cold-stored platelets

  • Jiménez-Marco, Teresa
  • Torres-Reverte, Natalia
  • Quetglas-Oliver, Miguel
  • Morell-García, Daniel
  • Ballester-Servera, Carme
[eng] Background - Riboflavin and UV light-based pathogen reduction technology (PRT) and cold-stored platelets (CSP) have a significant impact on platelet (PLT) function. The aim of this study is to determine whether the use of both methods is beneficial.Materials and methods - Twenty buffy coat (BC) PLT concentrates were grouped into 10 type-matched pairs, which were pooled and split into 10 non-PRT-treated PLTs and 10 PRT-treated PLTs, diluted in platelet additive solution (PAS-E) and leukoreduced. Both groups were cold-stored at 2-6ºC without agitation for 14 days (non-PRT CSP and PRT CSP). Hemostatic function and metabolic parameters were monitored on day 1 pre-refrigeration and on days 3, 7 and 14 of cold storage. Results - No swirling and no aggregates were observed at any time in either group after cold storage for 14 days. PRT CSP were less metabolically active (with better pH, lower lactate, lower pCO2 and higher pO2) than non-PRT CSP (p<0.001) after 14 days of cold storage. PRT CSP and non-PRT CSP resulted in faster clot formation over storage (p<0.001). Clot strength was reduced under optimal levels on day 14 in the PRT CSP (p<0.001). Discussion - The enhanced hemostatic PLT function achieved by CSP, i.e., faster clot formation, is also maintained by riboflavin and UV light treatment. The combination of riboflavin and UV light-based PRT and CSP has the added benefit of reducing platelet metabolism, which may have a positive effect on PLT viability. Further research is required to assess whether the in vitro benefits of combining PRT and CSP are confirmed in clinical trials.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrating high-throughput phenotyping and genome-wide association analyses to unravel Mediterranean maize resilience to combined drought and high temperatures

  • Shi, Rongli
  • López-Malvar, Ana
  • Knoch, Dominic
  • Tschiersch, Henning
  • Heuermann, Marc C.
  • Shaaf, Salar
  • Madur, Delphine
  • Santiago Carabelos, Rogelio
  • Balconi, Carlotta
  • Frascaroli, Elisabetta
  • Erdal, Sekip
  • Palaffre, Carine
  • Charcosset, Alain
  • Revilla Temiño, Pedro
  • Altmann, Thomas
14 pages, 5 figures, 2 tables., The produced raw datasets and source code were uploaded to the e!DAL repository in ISA-Tab format (http://dx.doi.org/10.5447/ipk/2025/8) according to the MIAPPE standard (Arend et al., 2014). A Data in Brief manuscript with the raw data records has been submitted as a supporting article. Supplementary material associated with this article can be found, in the online version, at doi:10.1016/j.stress.2025.100954., Integrating phenomics and genomics is a promising approach to identify genetic factors that confer stress resistance to plants in certain phases. Differently adapted germplasm enables valuable insights into multiple plant stress resilience mechanisms. The dynamic responses of 106 Mediterranean maize inbred lines to combined drought and high temperature (D-HT) were investigated by high-throughput shoot phenotyping. Two experiments were conducted under control (25/20 °C, 70 % field capacity) and D-HT conditions (35/25 °C, 30 % field capacity). Stress was applied from 18 to 32 days after sowing, followed by recovery under control conditions. The stress treatment resulted in decreased plant height, projected shoot area, estimated shoot volume (ESV), as well as diminished relative growth rates during the vegetative phase. Additionally, photosynthetic parameters decreased significantly under D-HT, but normalized during a recovery phase. Stress indices, namely stress resistance, stress recovery and stress adaptability, were calculated based on ESV. Both, stress resistance and recovery contributed to maize resilience to D-HT, however they appear to be mediated through different processes. Genome-wide association studies (GWAS) were performed to dissect the genetic basis of maize resilience to D-HT-stress. Overall, associations with 201 unique single nucleotide polymorphism (SNP) markers and 89 linked candidate genes were detected. We conducted a detailed temporal analysis of trait development across stress and recovery phases, and evaluated the dynamics of the underlying genetic system. These findings contribute to refining our understanding of multiple plant stress resilience mechanisms in the face of ongoing global climate change and to advance future maize breeding to enhance stress resilience., This work was performed in the frame of the DROMAMED project conducted under "PRIMA”, a program supported by the European Union (NextGenerationEU/PRTR) within the H2020 framework program. It was funded by the German Federal Ministry of Education and Research (BMBF), Project identification number: 01DH2101 and by the MCIN/AEI/ 10.13039/501100011033, grant no. PCI2021–121912. ALM’s postdoctoral contract was granted by Xunta de Galicia’s program “Axudas de apoio a etapa de formación postdoutoral”., Peer reviewed