Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Conodont colour alteration from subsurface Palaeozoic Strata of North-Western Bulgaria: burial history and hydrocarbon exploration

Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Conodontos y dacrioconáridos del Emsiense en Santa Cruz de Mudela, provincia de Ciudad Real, zona centroibérica meridional, España

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High performance lattice reduction on heterogeneous computing platform

  • Jozsa, Csaba M
  • Domene Oltra, Fernando
  • Vidal Maciá, Antonio Manuel
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
The lattice reduction (LR) technique has become very important in many engineering fields. However, its high complexity makes difficult its use in real-time applications, especially in applications that deal with large matrices. As a solution, the modified block LLL (MB-LLL) algorithm was introduced, where several levels of parallelism were exploited: (a) fine-grained parallelism was achieved through the cost-reduced all-swap LLL (CR-AS-LLL) algorithm introduced together with the MB-LLL by Jzsa et al. (Proceedings of the tenth international symposium on wireless communication systems, 2013) and (b) coarse-grained parallelism was achieved by applying the block-reduction concept presented by Wetzel (Algorithmic number theory. Springer, New York, pp 323-337, 1998). In this paper, we present the cost-reduced MB-LLL (CR-MB-LLL) algorithm, which allows to significantly reduce the computational complexity of the MB-LLL by allowing the relaxation of the first LLL condition while executing the LR of submatrices, resulting in the delay of the Gram-Schmidt coefficients update and by using less costly procedures during the boundary checks. The effects of complexity reduction and implementation details are analyzed and discussed for several architectures. A mapping of the CR-MB-LLL on a heterogeneous platform is proposed and it is compared with implementations running on a dynamic parallelism enabled GPU and a multi-core CPU. The mapping on the architecture proposed allows a dynamic scheduling of kernels where the overhead introduced is hidden by the use of several CUDA streams. Results show that the execution time of the CR-MB-LLL algorithm on the heterogeneous platform outperforms the multi-core CPU and it is more efficient than the CR-AS-LLL algorithm in case of large matrices., Financial support for this study was provided by grants TAMOP-4.2.1./B-11/2/KMR-2011-0002, TAMOP-4.2.2/B-10/1-2010-0014 from the Pazmany Peter Catholic University, European Union ERDF, Spanish Government through TEC2012-38142-C04-01 project and Generalitat Valenciana through PROMETEO/2009/013 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards the automatic layout synthesis in resonant-type metamaterial transmission lines

  • Selga, J.
  • Rodriguez Perez, Ana Maria
  • Gil, M.
  • Carbonell Olivares, Jorge
  • Martin, F.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The first approach towards the automatic layout generation of resonant-type metamaterial transmission lines by using space mapping optimisation is reported. Specifically, the so-called aggressive space mapping (ASM) technique is applied for synthesising microstrip lines loaded with complementary split ring resonators (CSRRs). From a certain set of elements of the circuit model of the unit cell of such lines (which is typically derived from system specifications), the topology (layout) of the CSRR-loaded microstrip line, providing the same electromagnetic response as the circuit model (within certain error limits), is generated automatically. This synthesis technique is of paramount importance for the design of metamaterial-based (or inspired) circuits implemented by means of electrically small resonators such as CSRRs and SRRs. Although the reported technique is applied here to the synthesis of a negative permittivity structure (CSRR-loaded line), the basics towards the extension of the technique to other artificial transmission lines are clearly established., This work has been supported by MEC (Spain) through the projects TEC2007-68013-C02 METAINNOVA and TEC2007-67630-C03 CABESERES and by MCI (Spain) through the project EMET CSD2008-00066 of the CONSOLIDER Ingenio 2010 Program. The authors especially thank Generalitat de Catalunya for funding CIMITEC and for supporting GEMMA through the project 2009SGR-421. The Ministerio de Education (Spain) has given an FPU grant to J.S. with reference AP2008-04707.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Orellana, Marco
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models., This work has been partially supported by MICIIN-Spain (Projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 AVANSAT, CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707), Generalitat de Catalunya (Project 2009SGR-421), and MITyC-Spain (Project TSI-020100-2010-169 METASINTESIS). Ferran Martin is in debt to ICREA for supporting his work through an ICREA Academia Award (calls 2008 and 2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering plants using diverse CRISPR-associated proteins and deregulation of genome-edited crops.

  • Zaman, Qamar U.
  • Raza, Ali
  • Chao, Li
  • Jones, Michael G.K.
  • Wang, Hua-Feng
  • Varshney, Rajeev K.
  • Lozano-Juste, Jorge|||0000-0001-7034-566X
[EN] The CRISPR/Cas system comprises RNA-guided nucleases, the target specificity of which is directed by Watson¿Crick base pairing of target loci with single guide (sg)RNA to induce the desired edits. CRISPR-associated proteins and other engineered nucleases are opening new avenues of research in crops to induce heritable mutations. Here, we review the diversity of CRISPR-associated proteins and strategies to deregulate genome-edited (GEd) crops by considering them to be close to natural processes. This technology ensures yield without penalties, advances plant breeding, and guarantees manipulation of the genome for desirable traits. DNA-free and off-target-free GEd crops with defined characteristics can help to achieve sustainable global food security under a changing climate, but need alignment of international regulations to operate in existing supply chains., The authors thank all those who participated in this study. R.K.V. thanks the Food Futures Institute of Murdoch University for supporting part of this work. The authors thank the reviewers, Muhammad Azhar Hussain, Rafaqat Ali Gill, and Qiong Hu for editing this manuscript. Images were created with BioRender (biorender.com). This study was funded by the Hainan Province Science and Technology Special Fund (ZDYF2022XDNY190), the Project of Sanya Yazhou Bay Science and Technology City (Grant Number: SCKJ-JYRC-2022-83), Hainan Provincial Natural Science Foundation of China (421RC486), Collaborative Innovation Center of Nanfan and High Efficiency Tropical Agriculture (XTCX2022NYB09), Innovational Fund for Scientific and Technological Personnel of Hainan Province, and the Major Project of Hubei Hongshan Laboratory (2022hszd002). Work in the J.L-J. group is funded by grants RYC2020-029097-I and PID2021-128826OA-I00 from Ministerio de Ciencia e Innovación (MCIN, Spain), AEI, ERDF, and grants CISEJI/2022/26 and AGROALNEXT/2022/067 from Generalitat Valenciana. It forms part of the AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. It was also supported by the Food Futures Institute of Murdoch University to R.K.V., and by a grant to M.G.K.J. from the Department of Agriculture, Forestry, and Fisheries (formerly DAWE), Government of Australia, Project Assisting Small Exporters (PASE), Building Capacity for Small Exporters to Exploit new breeding technologies , Grant No.4-FA4N7WL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of split-rings-based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these arti ficial lines, has been developed.The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a n ovel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool., This work was supported in part by MICIIN-Spain under Project TEC2010-17512 METATRANSFER, Project TEC2010-21520-C04-01, Project CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707, Generalitat de Catalunya under Project 2009SGR-421, and MITyC-Spain under Project TSI-020100-2010-169 METASINTESIS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The Risks to Vernacular Architecture Associated with Depopulation in the Valencian Community, Spain

  • Tortajada-Montalva, Eva|||0000-0001-8832-4218
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Morocho-Jaramillo, David Eduardo|||0000-0002-5974-937X
[EN] Depopulation is the most widespread demographic phenomenon in Spain. In addition, the areas affected by depopulation hold the greatest proportion of vernacular architecture in the country, and this may in turn lead to a risk for conservation. This research identifies the risks presented by depopulation for conservation of vernacular architecture, which can be classified into three categories: sociocultural risks; physical and material risks; and risks in the management of vernacular architecture. The methodology used follows a two-fold bibliographical review of articles and books. Texts on demographics, culture and society were analysed, paying particular attention to mentions of architecture and housing, while a review of studies on vernacular architecture and heritage focused on aspects relating to depopulation, migration, and cultural loss. Based on these results, a methodology was developed to analyse the level of risk to vernacular architecture in areas with population loss. To do this, the risks identified in the bibliographical review were transformed into quantifiable vulnerability factors. A methodology was created to analyse the level of risk of vernacular architecture by vulnerability factor. This methodology has been contrasted and perfected in 180 municipalities affected by depopulation in the Comunidad Valenciana, for possible application in other similar contexts, both in Spain and abroad. , This research was supported by “Subvenciones para la contratación de personal investigador predoctoral (ACIF/2021/421) financiado por la Generalitat Valenciana y el Fondo Social Europeo” and is part of the research project “REHABITAT—Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos” funded by the R&D&i programme of the Department for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Collaborative concept mapping activities in a classroom scenario

  • Elorriaga Arandia, Jon Ander
  • Arruarte Lasa, Ana
  • Calvo Fabo, Iñaki
  • Larrañaga Olagaray, Mikel
  • Rueda Molina, Urko
  • Herrán Izagirre, Elena
The aim of this study is to test collaborative concept mapping activities using computers in a classroom scenario and to evaluate the possibilities that Elkar-CM offers for collaboratively learning non-technical topics. Elkar-CM is a multi-lingual and multi-media software program designed for drawing concept maps (CMs) collaboratively. Concept mapping is a widely accepted technique that promotes meaningful learning. Graphically representing concepts of the learning domain and relationships between them helps students integrate new knowledge into their current cognitive structure. This study was carried out with Social Education degree students at the University of the Basque Country (UPV/EHU). The experiment included two learning activities. First, all students collaboratively constructed in the classroom a CM on the subject of Moral Development. Second, students were organised into groups to complete the CM generated in the first part., This work has been partially supported by the Spanish Ministry of Education, grant TIN2009-14380, the University of the Basque Country UPV/EHU, grant (EHU09/09) and the Basque Government, grant IT421-10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Modulation of proteostasis in polyglutamine expansion disorders: the role of mitochondrial sirtuins and IP₃/Ca²⁺ signalling in C. elegans

  • Trujillo del Río, Cristina
[ES] Las enfermedades neurodegenerativas son trastornos progresivos, complejos y actualmente incurables, caracterizados en gran medida por la alteración de la proteostasis, un proceso al que las neuronas son particularmente vulnerables. Las enfermedades por expansión de poliglutaminas (poliQ) están causadas por expansiones de repeticiones CAG. Como consecuencia, se generan proteínas mal plegadas propensas a la agregación que se acumulan en el cerebro, dando lugar a disfunción y degeneración neuronal. Entre ellas, la enfermedad de Huntington (EH) es la más prevalente. Está bien establecido que el trasfondo genómico de los individuos influye en la toxicidad y agregación proteica, con un impacto directo en la patología. Algunas variantes genéticas son protectoras y retrasan la aparición de los síntomas, mientras que otras aceleran la progresión de la enfermedad. La identificación de estos genes modificadores puede ser útil para el descubrimiento de nuevas dianas terapéuticas. En esta tesis, se utilizó Caenorhabditis elegans como modelo in vivo para investigar las vías moleculares que regulan la proteostasis y la resiliencia neuronal, centrándonos especialmente en dos vías: las sirtuinas mitocondriales y la señalización del calcio dependiente de las fosfolipasas C (PLC). En el Capítulo 1 investigamos el papel de la sirtuina mitocondrial SIR-2.3, el ortólogo en C. elegans de SIRT4, en la toxicidad de poliQs y de la huntingtina mutante (mHTT). La pérdida de sir-2.3 redujo significativamente la agregación neuronal de poliQ y mejoró la función neuronal en gusanos que expresaban mHTT. Estos efectos protectores estuvieron mediados por la activación de AMPK y la autofagia, con contribuciones parciales de los factores de transcripción DAF-16/FOXO y NHR-49. Asimismo, el silenciamiento de SIRT4 en modelos celulares humanos también redujo la agregación insoluble de mHTT. La inhibición farmacológica de la ATP sintasa mediante tomatidina o bedaquilina reprodujo el fenotipo de la pérdida de sir-2.3 de manera dependiente de AMPK. En el Capítulo 2 abordamos el papel de la señalización del calcio mediada por PLC en el mantenimiento de la proteostasis. La pérdida de función de las isoformas de PLC en el gusano incrementó la agregación de poliQ y deterioró la función motora. Centrándonos en plc-1, el ortólogo de PLC¿ de mamíferos, demostramos que su pérdida exacerba la agregación y la disfunción neuronal a través de una señalización deficiente de calcio mediada por el receptor de IP¿ en C. elegans, itr-1. Además, la depleción de plc-1 aumentó la agregación de ¿-sinucleína, lo que sugiere un papel más amplio en la proteostasis más allá de los modelos poliQ. De forma inesperada, durante los experimentos del Capítulo 2 observamos que algunos mutantes de plc-1 desarrollaban quistes en el sistema excretor, similares a los observados en mutantes con defectos en la célula excretora. Esto nos llevó a investigar un posible papel de PLC-1 en la polaridad epitelial. El sistema excretor de C. elegans es un órgano tubular simple en forma de H con una célula excretora altamente polarizada. Encontramos que PLC-1 es necesario para la correcta formación del lumen e interactúa genéticamente con FLN-2 (el ortólogo del gusano de la filamina, una proteína organizadora del citoesqueleto de actina). PLC-1 y FLN-2 se localizan en la membrana apical y colocalizan con marcadores apicales de polaridad PAR, lo que sugiere que cooperan para mantener la estructura del citoesqueleto y la polaridad epitelial. En conclusión, esta tesis identifica vías genéticas y metabólicas conservadas que regulan la proteostasis y la resiliencia neuronal. Al descubrir nuevos roles para el eje SIRT4-AMPK y la señalización del calcio mediada por PLC-1, este trabajo aporta conocimiento mecanístico y propone nuevas dianas terapéuticas potenciales para la EH y otros trastornos neurodegenerativos relacionados., [CA] Les malalties neurodegeneratives són trastorns progressius, complexos i actualment incurables, caracteritzats en gran mesura per l'alteració de la proteòstasi, un procés al qual les neurones són particularment vulnerables. Les malalties per expansió de poliglutamines (poliQ) estan causades per expansions de repeticions CAG. Com a conseqüència, es generen proteïnes mal plegades amb tendència agregar que s'acumulen al cervell, donant lloc a disfunció i degeneració neuronal. Entre aquestes, la malaltia de Huntington (MH) és la més prevalent. Està ben establit que el fons genòmic dels individus influeix en la toxicitat i l'agregació proteica, amb un impacte directe en la patologia. Algunes variants genètiques són protectores i retarden l'aparició dels símptomes, mentre que altres acceleren la progressió de la malaltia. La identificació d'aquests gens modificadors pot ser útil per al descobriment de noves dianes terapèutiques. En aquesta tesi, es va utilitzar Caenorhabditis elegans com a model in vivo per a investigar les vies moleculars que regulen la proteòstasi i la resiliència neuronal, centrant-nos especialment en dues vies: les sirtuïnes mitocondrials i la senyalització del calci dependent de les fosfolipases C (PLC). En el Capítol 1 vam investigar el paper de la sirtuïna mitocondrial SIR-2.3, l'ortòleg en C. elegans de SIRT4, en la toxicitat de les poliQ i de la huntingtina mutant (mHTT). La pèrdua de sir-2.3 va reduir significativament l'agregació neuronal de poliQ i va millorar la funció neuronal en nematods que expressaven mHTT. Aquests efectes protectors van estar mediats per l'activació d'AMPK i l'autofàgia, amb contribucions parcials dels factors de transcripció DAF-16/FOXO i NHR-49. Així mateix, el silenciament de SIRT4 en models cel·lulars humans també va reduir l'agregació insoluble de mHTT. La inhibició farmacològica de l'ATP sintasa mitjançant tomatidina o bedaquilina va reproduir el fenotip de la pèrdua de sir-2.3 de manera dependent d'AMPK. En el Capítol 2 vam abordar el paper de la senyalització del calci mediada per PLC en el manteniment de la proteòstasi. La pèrdua de funció de les isoformes de PLC va incrementar l'agregació de poliQ i va deteriorar la funció motora als nematods. Centrant-nos en plc-1, l'ortòleg de la PLC¿ dels mamífers, vam demostrar que la seua pèrdua exacerba l'agregació i la disfunció neuronal a través d'una senyalització del calci deficient mediada pel receptor d'IP¿ en C. elegans, ITR-1. A més, la depleció de plc-1 va augmentar l'agregació de l'¿-sinucleïna, el que suggereix un paper més ampli en la proteòstasi més enllà dels models de poliQ. De manera inesperada, durant els experiments del Capítol 2 vam observar que alguns mutants de plc-1 desenvolupaven quists en el sistema excretor, similars als observats en mutants amb defectes en la cèl·lula excretora. Això ens va portar a investigar un possible paper de PLC-1 en la polaritat epitelial. El sistema excretor de C. elegans és un òrgan tubular simple en forma de H amb una cèl·lula excretora altament polaritzada. Vam trobar que PLC-1 és necessari per a la correcta formació del lumen i que interactua genèticament amb FLN-2 (l'ortòleg del cuc de la filamina, una proteïna organitzadora del citoesquelet d'actina). PLC-1 i FLN-2 es localitzen a la membrana apical i colocalitzen amb marcadors apicals de polaritat PAR, la qual cosa suggereix que cooperen per a mantindre l'estructura del citoesquelet i la polaritat epitelial. En conclusió, aquesta tesi identifica vies genètiques i metabòliques conservades que regulen la proteòstasi i la resiliència neuronal. En descobrir nous rols per a l'eix SIRT4-AMPK i la senyalització del calci mediada per PLC-1, aquest treball aporta coneixement mecanístic i proposa noves dianes terapèutiques potencials per a la MH i altres trastorns neurodegeneratius relacionats., [EN] Neurodegenerative diseases are progressive, complex and currently incurable disorders, largely characterized by the disruption of proteostasis, a process to which neurons are particularly vulnerable. Polyglutamine (polyQ) diseases are caused by CAG repeat expansions that generate aggregation-prone proteins with toxic gain-of-function properties. These aggregates impair cellular quality control systems, leading to neuronal dysfunction and degeneration. Huntington's disease (HD) is the most prevalent polyQ disorder. It is well known that the genomic background of individuals influences protein toxicity and aggregation, having an impact on the pathology. Some genes are protective, delaying the onset of symptoms, while others accelerate disease progression. Finding such modifier genes may be useful for the discovery of new therapeutic targets. In this thesis, Caenorhabditis elegans was used as an in vivo model to investigate molecular pathways that regulate proteostasis and neuronal resilience, with a particular focus on mitochondrial sirtuins and phospholipase C (PLC)-dependent calcium signalling. In Chapter 1, we investigated the role of the mitochondrial sirtuin SIR-2.3, the C. elegans orthologue of mammalian SIRT4, in polyQ and mutant huntingtin (mHTT) toxicity. Loss of sir-2.3 significantly reduced neuronal polyQ aggregation and improved neuronal function in worms expressing mHTT. These protective effects were mediated by activation of AMPK and autophagy, with partial contributions from the transcription factors DAF-16/FOXO and NHR-49. Importantly, SIRT4 knockdown in human cell models also reduced insoluble mHTT aggregation, indicating evolutionary conservation. Pharmacological inhibition of ATP synthase using tomatidine or bedaquiline phenocopied sir-2.3 loss in an AMPK-dependent manner, highlighting the SIRT4-AMPK axis as a key regulator linking mitochondrial metabolism, autophagy and neuronal proteostasis. Chapter 2 addressed the role of PLC-mediated calcium signalling in the maintenance of proteostasis. Disruption of multiple PLC isoforms increased polyQ aggregation and impaired motor function, indicating a conserved role for this pathway. Focusing on plc-1, the orthologue of mammalian PLC¿, we demonstrated that its loss exacerbates aggregation and neuronal dysfunction through impaired IP¿-ITR-1 calcium signalling. Furthermore, plc-1 depletion enhanced ¿-synuclein aggregation, suggesting a broader role in proteostasis beyond polyQ models. Unexpectedly, during the experiments of Chapter 2, we observed that some plc-1 mutants developed large cysts in the excretory system, reminiscent of excretory cell-defective mutants. This led us to investigate a role of PLC-1 in epithelial polarity. The C. elegans excretory system is a simple H-shaped tubular organ with a highly polarized excretory cell, making it an ideal model for studying apical-basal polarity. We found that PLC-1 is required for proper lumen formation and genetically interacts with FLN-2 (the worm orthologue of filamin, an actin-organizing protein). PLC-1 and FLN-2 localize to the apical membrane and colocalize with PAR polarity apical markers, suggesting they cooperate to maintain cytoskeletal structure and epithelial polarity. In conclusion, this thesis identifies conserved genetic and metabolic pathways that regulate proteostasis and neuronal resilience. By uncovering roles for the SIRT4-AMPK axis and PLC-1-calcium signalling, this work provides mechanistic insight and proposes new potential therapeutic targets for HD and related neurodegenerative disorders., This work was funded by grants from the Instituto de Salud Carlos III (ISCIII) (PI20/00114 and PI23/00455). Jose María Millán holds a Fortalece grant from the ISCIII (PCI2021-122099-2B). ISCIII grants are co-financed by the European Regional Development Fund “A way to achieve Europe” (ERDF). Julia Tortajada-Perez holds a grant from the Generalitat Valenciana and the European Social Fund (CIACIF2022/421). Andrea del Valle Carranza was supported by the MODFAT-HD (PCI2021-122099-2B) grant, funded by MCIN/AEI/10.13039/501100011033 and by a postdoctoral Marie Skolodowska-Curie fellowship funded by the European Union through the “NextGenerationEU/PRTR” and Agencia Española de Investigación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis y Comparación de Modelos de Estudiante Abiertos, Analysis and Comparison of Open Student Models

  • Rueda Molina, Urko
  • Calvo Fabo, Iñaki
  • Arruarte Lasa, Ana
  • Elorriaga Arandia, Jon Ander
[EN] This article is focused on the study of Open Student Models, area that takes on the opening of Student Models¿ characteristics in Technology Based Learning Systems. In this work a review of the state of the art on Open Student Models is performed. Different approximations of the literature are compared against an opening guide that authors have defined. This guide is formulated on three main parts: learning domain, learning state and progress and student profile., Este trabajo está cofinanciado por la Universidad del País Vasco/Euskal Herriko Unibertsitatea (EHU09/09), el Ministerio de Ciencia y Tecnología a través del programa CICYT (TIN2009-14380) y el Gobierno Vasco (IT421-10).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment Methodology for Physical Vulnerability of Vernacular Architecture in Areas Affected by Depopulation: The Case of Comunidad Valenciana, Spain

  • Tortajada-Montalva, Eva|||0000-0001-8832-4218
  • Mileto, Camilla|||0000-0002-6987-8802
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
[EN] The intensity with which the phenomenon of depopulation has affected rural municipalities in Spain between 1950 and 2022 has led to a loss in the intergenerational transmission of traditional knowledge, values and customs. Sociocultural loss entails associated physical risks: the abandonment, demolition, and loss of vernacular architecture. This research analyzes the evolution of this type of architecture in a period of acute depopulation and its current state of conservation. A total of 180 case studies in the region of Comunidad Valenciana are analyzed through four factors affecting the physical vulnerability of dwellings: year of construction, state of conservation, type of use, and a combination of all three. Data management software is used to combine all the information and produce the results in a tabular and graphical format, while the Geographic Information System is used to draw up risk maps showing the results. These results are then divided into analysis groups created according to the degree of depopulation observed in the years mentioned. This made it possible to identify the relationship between depopulation and the conservation of vernacular architecture, showing the risk level for each case study, and thus creating an analysis methodology applicable in other territories affected by depopulation at a national and international level., This research was supported by Subvenciones para la contratación de personal investigador predoctoral (ACIF/2021/421) financiado por la Generalitat Valenciana y el Fondo Social Europeo and is part of the research project RE-HABITAT Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos funded by the R&D&i programme of the Department for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parallel Sphere Detector algorithm providing optimal MIMO detection on massively parallel architectures

  • Jozsa, Csaba M
  • Kolumban, Geza
  • Vidal Maciá, Antonio Manuel
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Gonzalez, Alberto|||0000-0002-6984-3212
Multiple-input multiple-output (MIMO) systems have attracted considerable attention in wireless communications because they offer a significant increase in data throughput and link coverage without additional bandwidth requirement or increased transmit power. The price that has to be paid is the increased complexity of hardware components and algorithms. The sphere detector (SD) algorithm solves the problem of maximum likelihood (ML) detection for MIMO channels by significantly reducing the search space of possible solutions. The main drawback of the SD algorithm is in its sequential nature, consequently, running it on massively parallel architectures (MPAs) is very inefficient. In order to overcome the drawbacks of the SD algorithm, a new parallel sphere detector (PSD) algorithm is proposed. It implements a novel hybrid tree search method, where the algorithm parallelism is assured by the efficient combination of depth-first search and breadth-first search algorithms. A path metric-based parallel sorting is employed at each intermediate stage. The PSD algorithm is able to adjust its memory requirements and extent of parallelism to fit a wide range of parallel architectures. Mapping details for MPAs are proposed by giving the details of thread dependent, highly parallel building blocks of the algorithm. Based on the building blocks proposed, a mapping to general-purpose graphics processing unit is provided, and its performance is evaluated. In order to achieve high-throughput, several levels of parallelism are introduced, and different scheduling strategies are considered. Copyright © 2015 John Wiley & Sons, Ltd., This work was supported by grants TAMOP-4.2.1./B-11/2/KMR-2011-0002, TAMOP-4.2.2/B-10/1-2010-0014 from the Hungarian Government, KAP-1.3-14/001 from the Pazmany Peter Catholic University, and CICYT TEC2012-38142-CO4 from the Spanish Government. The authors would like to express their deepest gratitude for the help and support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vitamin A supplementation enhances Senegalese sole (Solea senegalensis) early juvenile's immunocompetence: New insights on potential underlying pathways

  • Fernández Monzón, Ignacio
  • López-Joven, Carmen
  • Andree, Karl B.
  • Roque, Ana
  • Gisbert, Enric
7 páginas, 3 figuras., Senegalese sole (Solea senegalensis) has been considered since the 1990's to be a promising flatfish species for diversifying European marine aquaculture. However, pathogen outbreaks leading to high mortality rates can impair Senegalese sole commercial production at the weaning phase. Different approaches have been shown to improve fish immunocompetence; with this in mind the objective of the work described herein was to determine whether increased levels of dietary vitamin A (VA) improve the immune response in early juveniles of Senegalese sole. For this purpose, Senegalese sole were reared and fed with Artemia metanauplii containing increased levels of VA (37,000; 44,666; 82,666 and 203,000 total VA IU Kg(-1)) from 6 to 60 days post-hatch (early juvenile stage). After an induced bacterial infection with a 50% lethal dose of Photobacterium damselae subsp. damselae, survival rate, as well as underlying gene expression of specific immune markers (C1inh, C3, C9, Lgals1, Hamp, LysC, Prdx1, Steap4 and Transf) were evaluated. Results showed that fish fed higher doses of dietary VA were more resistant to the bacterial challenge. The lower mortality was found to be related with differential expression of genes involved in the complement system and iron availability. We suggest that feeding metamorphosed Senegalese sole with 203,000 total VA IU Kg(-1) might be an effective, inexpensive and environmentally friendly method to improve Senegalese sole immunocompetence, thereby improving survival of juveniles and reducing economic losses., This work was funded by grant AGL2005-02478 from the Ministry of Education and Culture (MEC) of the Spanish Government. IF was supported by a predoctoral Spanish fellowship (BES-2006- 12650) and a Portuguese postdoctoral fellowship (SFRH/BPD/ 82049/2011) and CL-J was supported by a predoctoral Spanish fellowships (INIA RTA 2005-00079-00-00 and RTA 421 2007- 00063-00-00) and a French postdoctoral fellowship (DRH/LG/JC nº 2013-865)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Designing and implementing a massive open online course: Lessons learnt

  • Bueno García, C.
  • Hernández Ara, L.
  • Sein-Echaluce Lacleta, M.L.
  • Ubieto Artur, C.
  • Bueso Guillén, P.
  • Ubieto-Artur, I.
  • Fidalgo Blanco, A.
•In this paper, we describe the design, implementation, and evaluation of a Massive Open Online Course, or MOOC, on good practice in the application of Intellectual Property. It is aimed primarily at teachers and students, and taught in Spanish. We have used the Spanish legislation on Intellectual Property. This paper outlines the structure and content of a course developed on an ad-hoc basis, and describes its evaluation by participants in questionnaires and a final survey. The results of the initial questionnaire are framed by a) the participant''s profile, and b) by consideration of the MOOC''s implementation, given the results of the satisfaction survey. In this paper we describe the advantages of the MOOC and identify areas for improvement.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

La "caliza de Scyphocrinites" (Silúrico Superior) del norte de Sevilla: avance de resultados paleontológicos y bioestratigráficos

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of split rings based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these artificial lines, has been developed. The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a novel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Orellana Gutiérrez, Marco Antonio
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR- and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of inter-resonator coupling in split ring resonator loaded metamaterial transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Mesa Ledesma, Francisco
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper investigates the effects of inter-resonator coupling in metamaterial transmission lines loaded with split ring resonators (SRRs). The study is performed from Bloch mode theory applied to the multiport equivalent circuit model of the unit cell of such artificial lines. From this analysis, it follows that the stopband bandwidth, inherent to SRR-loaded lines, is enhanced as inter-resonator coupling strengthens, and this enhancement is attributed to the presence of complex modes. The theoretical results are corroborated through calculation of the dispersion relation using a full-wave eigenmode solver, and also by measuring the frequency response of SRR-loaded lines with different inter-resonator distance and, hence, coupling.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective mode suppression in microstrip differential lines by means of electric-LC (ELC) and magnetic-LC (MLC) resonators

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, it is demonstrated that the so-called electric-LC (ELC) resonators, and their dual counterparts, the magnetic-LC (MLC) resonators, are useful for the selective suppression of either the differential or the common mode in microstrip differential lines. The key point to mode suppression is the alignment of the resonator with the electric (differential mode) or magnetic (common mode) wall of the line. It is shown that by simply rotating the resonators 90∘ we can selectively choose the suppressed mode in the vicinity of the resonator's fundamental resonance frequency. The theory is validated through full-wave electromagnetic simulation, the lumped element equivalent circuit models of the proposed structures and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact dual-band differential power splitter with common-mode suppression and filtering capability based on differential-mode composite right/left-handed transmission-line metamaterials

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a compact differential-mode (balanced) power splitter with filtering capability and dual-band functionality. This multifunctional device is based on differential-mode composite right/left-handed (DM-CRLH) transmission lines specifically designed to achieve the dual-band behavior and to suppress the common-mode noise over a broad frequency band. The DM-CRLH lines are implemented by means of pairs of CRLH lines with series connected interdigital capacitors and strip inductors in the series branches and mirrored step impedance resonators (SIRs) in the shunt branches. For the differential mode, the SIRs are described by parallel resonant tanks, and the resulting equivalent circuit model is the canonical circuit of a CRLH line, which can be used for designing the dual-band balanced splitter/filter. However, the SIRs are opened under common-mode operation, introducing transmission zeros for that mode. By tailoring the position of these transmission zeros, the common mode can be effectively rejected over a frequency band that covers the splitter operating frequencies. The fabricated dual-band balanced power splitter exhibits a measured matching level better than -11 dB, and measured insertion losses (power splitting) lower than 4.1 dB at the design frequencies (f₁=1.8 GHz and f₂=2.4 GHz). The common-mode suppression at f₁ and f₂ is better than 30 dB.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Shaterian, Zahra
  • Abbott, Derek|||0000-0002-0945-2674
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators (BC-SRRs). As a basis for this sensor, a one-dimensional displacement sensor based on a microstrip line loaded with BC-SRRs is presented firstly. It is shown that compared to previously published displacement sensors, based on SRR-loaded coplanar waveguides, the proposed one-dimensional sensor benefits from a much wider dynamic range. Secondly, it is shown that with modifications in the geometry of the BC-SRRs, the proposed one-dimensional sensor can be modified and extended by adding a second element to create a high-dynamic range two-dimensional displacement sensor. Since the proposed sensors operate based on a split in the resonance frequency, rather than the resonance depth, they benefit from a high immunity to environmental noise. Furthermore, since the sensors' principle of operation is based on the deviation from symmetry, they are more robust to ambient conditions such as changes in the temperature, and thus they can be used as alignment sensors as well. A prototype of the proposed two-dimensional sensor is fabricated and the concept and simulation results are validated through experiment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Common-mode suppressed differential bandpass filter based on open complementary split ring resonators fabricated in microstrip technology without ground plane etching

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A differential (or balanced) bandpass filter based on open complementary split ring resonators (OCSRRs) coupled through admittance inverters is presented in this article. Pairs of OCSRRs are symmet- rically placed in a mirror configuration between the strips of the differential line and are modeled by means of two series connected parallel resonators. For the differential (odd) mode, there is a virtual ground at the connecting plane between the OCSRR pairs, and the structure is roughly described by the canonical model of a bandpass filter, consisting of a cascade of shunt resonators coupled through admittance inverters. It is demonstrated that, through a proper design of the OCSRR stages, the common mode noise in the vicinity of the differential filter pass band can be efficiently suppressed. Due to the differential mode operation of the filter, it is not necessary to incorporate metallic vias to ground the OCSRRs. Moreover, as compared to other differential filters based on OCSRRs, defected ground structures are not present in the proposed filters. To illustrate the potential of the approach, two balanced bandpass filters are designed, fabricated, and characterized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Angular displacement and velocity sensors based on electric-LC (ELC) loaded microstrip lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
Planar microwave angular displacement and angular velocity sensors implemented in microstrip technology are proposed. The transducer element is a circularly shaped divider/combiner, whereas the sensing element is an electricLC resonator, attached to the rotating object and magnetically coupled to the circular (active) region of the transducer. The angular variables are measured by inspection of the transmission characteristics, which are modulated by the magnetic coupling between the resonator and the divider/combiner. The degree of coupling is hence sensitive to the angular position of the resonator. As compared with coplanar waveguide angular displacement and velocity sensors, the proposed microstrip sensors do not require air bridges, and the ground plane provides backside isolation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

S-shaped complementary split ring resonators and their application to compact differential bandpass filters with common-mode suppression

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents an S-shaped complementary split ring resonator (S-CSRR) for application in compact differential filters. The working principle of the proposed S-CSRR is explained and a circuit model is developed and validated through electromagnetic simulations. It is shown that an S-CSRR-loaded differential microstrip line with series gaps can be used in the design of compact differential bandpass filters (BPFs) with common-mode suppression. The filter design procedure is explained and the theoretical concept is validated through fabrication and measurement of a compact (0.09 λg 0.25 λg) third-order differential BPF with common-mode suppression.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanically reconfigurable microstrip lines loaded with stepped impedance resonators and potential applications

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on exploring the possibilities and potential applications of microstrip transmission lines loaded with stepped impedance resonators (SIRs) etched on top of the signal strip, in a separated substrate. It is shown that if the symmetry plane of the line (a magnetic wall) is perfectly aligned with the electric wall of the SIR at the fundamental resonance, the line is transparent. However, if symmetry is somehow ruptured, a notch in the transmission coefficient appears. The notch frequency and depth can thus be mechanically controlled, and this property can be of interest for the implementation of sensors and barcodes, as it is discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of transmission lines loaded with pairs of coupled resonant elements and application to sensors

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the analysis of transmission lines loaded with pairs of magnetically coupled resonators. We have considered two different structures: (i) a microstrip line loaded with pairs of stepped impedance resonators (SIRs), and (ii) a coplanar waveguide (CPW) transmission line loaded with pairs of split ring resonators (SRRs). In both cases, the line exhibits a single resonance frequency (transmission zero) if the resonators are identical (symmetric structure with regard to the line axis), and this resonance is different to the one of the line loaded with a single resonator due to inter-resonator coupling. If the structures are asymmetric, inter-resonator coupling enhances the distance between the two split resonance frequencies that arise. In spite that the considered lines and loading resonators are very different and are described by different lumped element equivalent circuit models, the phenomenology associated to the effects of coupling is exactly the same, and the resonance frequencies are given by identical expressions. The reported lumped element circuit models of both structures are validated by comparing the circuit simulations with extracted parameters with both electromagnetic simulations and experimental data. These structures can be useful for the implementation of microwave sensors based on symmetry properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling metamaterial transmission lines loaded with pairs of coupled split-ring resonators

  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
A lumped-element equivalent circuit model of the unit cell of metamaterial transmission lines loaded with pairs of coupled split-ring resonators (SRRs) is presented. It is assumed that the dominant coupling mechanism between the SRRs forming the pair is magnetic, and that the distance between SRRs of adjacent cells is high enough to neglect such additional inter-resonator coupling. SRRs are oriented with their symmetry plane orthogonal to the line axis. Under these conditions, the line-to-SRR coupling is also magnetic, the electric coupling being negligible. The presented model accounts for the rupture of symmetry that can be caused, for instance, by asymmetric dielectric loading of the SRRs. Thus, the analysis is carried out on a general model where the SRRs of the pair have different inductance and capacitance. Then, different cases are studied, in particular a line with identical SRRs, and a line with different SRRs, but with the same resonance frequency. It is shown that coupling between SRRs tends to far or split the resonance frequencies of the loaded lines (transmission zeros), except for the symmetric case, where only one resonance (different to the one of uncoupled SRRs) appears. The model is validated by comparing circuit simulations using extracted parameters with electromagnetic simulations and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential microstrip lines with common-mode suppression based on electromagnetic band-gaps (EBGs)

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A technique for the suppression of the common mode in differential (balanced) microstrip lines, based on electromagnetic band-gaps (EBGs), is presented in this letter. It is demonstrated that by periodically modulating the common-mode characteristic impedance of the line and simultaneously forcing the differential-mode impedance to be uniform (and equal to the reference impedance of the differential ports), the common mode can be efficiently suppressed over a certain frequency band, while the line is transparent for the differential-mode. The main advantage of EBGs, as compared to other approaches for common-mode suppression in differential microstrip lines, is the fact that the ground plane is kept unaltered. Moreover, the design of the differential line is straightforward since the required level of common-mode suppression and bandwidth are given by simple approximate analytical expressions. As a design example, we report a four-stage common-mode suppressed differential line with 68% fractional bandwidth for the common-mode stopband centered at 2.4 GHz, and maximum common-mode rejection ratio (CMRR) of 19 dB at that frequency. Furthermore, we have designed and fabricated a six-stage double-tuned common-mode suppressed differential line in order to enhance the stopband bandwidth for the common mode around 2.4 GHz.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recent advances in multiband printed antennas based on metamaterial loading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
It is shown that printed antennas loaded with metamaterial resonators can be designed to exhibit multiband functionality. Two different antenna types and metamaterial loading are considered: (i) printed dipoles or monopoles loaded with open complementary split ring resonators (OCSRRs) and (ii) meander line or folded dipole antennas loaded with split ring resonators (SRRs) or spiral resonators (SRs). In the first case, multiband operation is achieved by series connecting one or more OCSRRs within the dipole/monopole. Such resonators force opens at their positions, and by locating them at a quarter wavelength (at the required operating frequencies) from the feeding point, it is possible to achieve multiple radiation bands. In the second case, dual-band functionality is achieved through the perturbation of the antenna characteristics caused by the presence of the metamaterial resonators. This latter strategy is specially suited to achieve conjugate matching between the antenna and the chip in radiofrequency identification (RFID) tags at two of the regulated UHF-RFID bands.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dual-band impedance-matching networks based on split-ring resonators for applications in RF identification (RFID)

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the design of dual-band impedance-matching networks of interest in RF identification (RFID) systems. By cascading an impedance-matching network between the chip and antenna, the performance of the RFID tags can be improved. The main aim of this study is to demonstrate the possibility of designing such networks by means of split-ring resonators coupled to microstrip transmission lines. These resonators are especially useful in this design since their equivalent circuit substantially simplifies the parameter calculation of the matching network. Dual-band conjugate matching at two different frequencies, f1=867 MHz and f2=915 MHz, corresponding to the assigned bands for UHF RFID in Europe and the U.S., respectively, is demonstrated. The main difficulty for the synthesis of these dual-band matching networks relies on the proximity of f1 and f2 . Although the chip impedance cannot be considered a design parameter, the network design can be alleviated by allowing certain flexibility in the antenna stage. The fabricated prototype, a dual-band impedance-matching network based on split-ring resonators and loaded with a slot antenna, was characterized by measuring its reflection coefficient. The results reveal that conjugate matching at the above-cited frequencies for the chip impedance under consideration is achieved.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dual-band UHF-RFID tags based on meander line antennas loaded with spiral resonators

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
The purpose of this letter is to implement dual-band tags for ultrahigh-frequency (UHF) radio frequency identification (RFID) applications operative in Europe and the US. Since the regulated bands of UHF-RFID in Europe (867 MHz) and the US (915 MHz) are close, broadband tags might be also considered. However, it is demonstrated in this letter that the performance of dual-band tags designed to operate at the frequency bands of interest is superior to that of broadband (monoband) tags. A meander-line antenna (MLA) has been considered for tag implementation. The dual-band functionality is achieved through a perturbation method consisting of coupling an electrically small resonator [a two-turn spiral resonator (2-SR)] to the antenna. The analysis, design, and fabrication of a dual-band UHF-RFID tag has been carried out. The measured performance of the fabricated prototype is in good agreement with theory. Measured read ranges of 6 and 8 m at the European and US frequency bands, respectively, have been obtained.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Printed Magnetoinductive-Wave (MIW) delay lines for chipless RFID Applications

  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A novel fully passive and electromagnetic chipless radiofrequency identification (RFID) system is proposed. The system is based on printed tags implemented with magnetoinductive-wave (MIW) delay lines. Such lines are composed of a periodic array of coupled square split ring resonators (SSRRs) and propagate slow waves. The tag is codified by introducing reflectors (which provide the identification signature) between the elements of the array. When the tags are interrogated with a pulse in time domain, they produce replicas at the positions where the reflectors are placed. Thanks to the slow group velocity of the MIW delay line, the replicas of the original pulse are not overlapped in time domain and can be demodulated, thus providing the identification code of the tag. The design considerations to implement these chipless tags are studied in the present work. Moreover, a complete set of codified MIW lines for a two-bit system is designed, manufactured and measured. The reported experimental results validate the proposed approach.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fundamental-mode Leaky-Wave Antenna (LWA) using slotline and Split-Ring-Resonator (SRR)-based metamaterials

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A new composite right/left-handed (CRLH) slotline leaky-wave antenna (LWA) is proposed. The antenna, implemented by loading a slotline with split-ring resonators (SRRs), is designed to exhibit a balanced dispersion relation, with a continuous transition between the left-handed and the right-handed bands at 2.5 GHz. Since the periodicity of the structure is much less than a wavelength, the proposed LWA belongs to the family of quasi-uniform LWAs, and it radiates from the fundamental mode (contrary to periodic LWAs). Measured and simulated radiation patterns, gain, and scanning angle are reported for a 17-cell LWA. The experimental results demonstrate the potential of the LWA to continuously radiate from backward (- 50°) to forward (+60°) scanning angles, with maximum gains of 7.1 and 11.3 dB in the left- and right-handed bands, respectively, and specular radiation patterns.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An approach for the design of passive UHF-RFID tags mounted on optical discs

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this paper, an innovative design strategy for UHF-RFID tags mounted on optical discs (such as DVDs) is presented. By using the metal layer of the disc as the main radiating element, it is possible to overcome the severe limitations of the existing tags for disc identification in terms of read range and bandwidth. The design and synthesis process, based on the proposed circuit model of the tag, is described. A worldwide UHF-RFID tag prototype, for direct mounting on a DVD disc, is designed and fabricated. The measured read range demonstrates that the presented method drastically improves the performance within the whole UHF-RFID band (840-930 MHz), in comparison to the DVD tags found in the available literature.