Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 44
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Near-surface defects break symmetry in water adsorption on CeO2x(111)

  • Custance, Oscar
  • Gonzalez Lastre, Manuel
  • Kim, Kyungmin
  • Fernández-Villanueva, Estefanía
  • Pou, Pablo
  • Abe, Masayuki
  • Sepehri-Amin, Hossein
  • Kawai, Shigeki
  • Ganduglia-Pirovano, M. Veronica
  • Perez, Ruben
[EN] Water interactions with oxygen-deficient cerium dioxide (CeO2) surfaces are central to hydrogen production and catalytic redox reactions, but the atomic-scale details of how defects influence adsorption and reactivity remain elusive. Here, we unveil how water adsorbs on partially reduced CeO2-x(111) using atomic force microscopy (AFM) with chemically sensitive, oxygen-terminated probes, combined with first-principles calculations. Our AFM imaging reveals water molecules as sharp, asymmetric boomerang-like features radically departing from the symmetric triangular motifs previously attributed to molecular water. Strikingly, these features localize near subsurface defects. While the experiments are carried out at cryogenic temperatures, water was dosed at room temperature, capturing configurations relevant to initial adsorption events in catalytic processes. Density functional theory identifies Ce3+ sites adjacent to subsurface vacancies as the thermodynamically favored adsorption sites, where defect-induced symmetry breaking governs water orientation. Force spectroscopy and simulations further distinguish Ce3+ from Ce4+ centers through their unique interaction signatures. By resolving how subsurface defects control water adsorption at the atomic scale, this work demonstrates the power of chemically selective AFM for probing site-specific reactivity in oxide catalysts, laying the groundwork for direct investigations of complex systems such as single-atom catalysts, metal-support interfaces, and defect-engineered oxides., This work was supported by NIMS grants (AG2030 and AM2100), by several Grant-in-Aid for Scientific Research (19H05789, 21H01812, 21K18876, 22H00285, 23KJ1516, 24K01350) from the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT) and by the Spanish Ministry of Science, Innovation and Universities (MCIU), through projects PID2023-149150OB-I00 and PID2021-128915NB-I00, and the "Maria de Maeztu" Program for Units of Excellence in R&D (CEX2023-001316-M). E.F.V. acknowledges support from the Margarita Salas postdoctoral fellowship (Spanish MIU and European Union NextGenerationEU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperacion, Transformacion y Resiliencia European Union NextGenerationEU). The Spanish Supercomputing Network (RES) is acknowledged for providing computational resources at the Marenostrum Supercomputer (BSC, Barcelona).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering PdAu/CeO2 Alloy/Oxide Interfaces for Selective Methane-to-Methanol Conversion with Water

  • Fernández-Villanueva, Estefanía
  • Ramírez, Pedro J.
  • Lustemberg, Pablo G.
  • Pérez, Rubén
  • Ganduglia-Pirovano, Maria Veronica
  • Rodríguez, José A.
[EN] The direct conversion of methane-to-methanol remains a critical challenge in methane valorization. In this study, we unveil the crucial role of PdAu/CeO2 catalysts in enabling selective methane transformation under mild conditions, using only water as the sole oxidant. Through a combination of experimental techniques, including XPS and catalytic testing, alongside density functional theory (DFT) calculations, we demonstrate that a Pd0.3Au0.7/CeO2 catalyst, which predominantly exposes isolated Pd atoms, achieves remarkable methanol selectivity (similar to 80%) at 500 K with a 1:1 methane-to-water ratio. While Pd/CeO2 efficiently activates methane, its tendency for overreaction leads to complete methanol decomposition, thereby limiting selectivity. Alloying Pd with Au on ceria mitigates this over-reactivity, preventing methanol degradation while maintaining sufficient catalytic activity. The PdAu/CeO2 composite exhibits a synergistic effect: Pd in contact with the ceria support facilitates methane activation and water dissociation, while Au fine-tunes reactivity to promote methanol formation. DFT calculations confirm that isolated Pd sites at the PdAu/CeO2 interface play a key role in balancing activity and selectivity. This work underscores the importance of alloy/oxide interfaces in controlling selective methane conversion with water and offers valuable insights for designing highly efficient catalysts for methanol synthesis., The authors thank J.M. Chavez and R.A. Soler for their help during the initial characterization of the PdAu alloys and PdAu/CeO2 composites, and B. Hammer, M.-P. V. Christiansen, and A. Bruix for their guidance in applying the GOFEE methodology. The research conducted at the Chemistry Division of Brookhaven National Laboratory was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division, Catalysis Science Program (Grant No. DE-SC0012704). P.J.R. is grateful to Zoneca-CENEX for an internal grant that facilitated part of this research. E.F.V. thanks UPV for her Margarita Salas postdoctoral fellowship (Spanish MIU and European Union-Next Generation EU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperacion, Transformacion y Resiliencia - European Union - NextGenerationEU). M.V.G.P. and P.G.L. thank the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, UE. R.P. acknowledges support from the Spanish Ministry of Science and Innovation, through project PID2023-149150OB-I00, and the "Maria de Maeztu" Programme for Units of Excellence in R&D (CEX2023-001316-M). The authors also acknowledge computational resources provided by the Red Espanola de Supercomputacion (RES) at MareNostrum 4 and 5 (BSC, Barcelona) node and the Centro de Computacion Cientifica-Universidad Autonoma de Madrid (CCC-UAM). Additionally, this research was supported by access to the Galician Supercomputing Center (CESGA) infrastructure, including its FinisTerrae III supercomputer and its permanent data storage system, funded by the Spanish Ministry of Science and Innovation, the Galician Government, and the ERDF.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Noninvasive and nonadiabatic quantum Maxwell demon

  • Trigal, Lucas
  • Sánchez, Rafael
[eng] A quantum mechanical Maxwell demon is proposed in a quantum dot setting. The demon avoids continuous-measurement-induced decoherence by exploiting an undetailed charge detector. The control of coherent tunneling via Landau-Zener-Stückelberg-Majorana driving allows for efficient feedback operations with no work invested. The local violation of the second law achieves simultaneous power generation and cooling. We discuss the response current fluctuations, and the demon backaction derived from failures, finding optimal performance in the nonadiabatic regime.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Tunable optical matter: electrostatic repulsion modulates near- and far-field gold nanoparticle arrangements

  • Chen, Jui-Kai
  • Olmos Trigo, Jorge
  • Louis, Boris
  • Huang, Chih-Hao
  • Rocha, Susana
  • Masuhara, Hiroshi
  • Hofkens, Johan
  • Delgado-Buscalioni, Rafael
  • Bresolí-Obach, Roger
  • Marqués, Manuel I.
  • Meléndez, Marc
The dynamics and equilibrium configurations of immersed optically-bound particles are complex phenomena involving several physical mechanisms such as optical forces, electrostatic interactions, and fluid dynamics. In this work, we unravel, using experiments and numerical simulations, the key role played by short-range electrostatic forces. The repulsive interaction among gold nanoparticles is adjusted by changing the salt concentration. When the electrostatic interaction is reduced, near-field optical binding with particles oriented along the polarization direction is promoted, while, for low values of the salt concentration, inter-particle repulsion induces far-field (FF) optical binding configurations oriented perpendicular to the polarization. The importance of electrostatic force is confirmed by a theoretical model in which the repulsive effect is explicitly tuned. The numerical results reproduce the measured particle configurations and highlight the dominant role of electrostatic interactions, particularly in FF optical binding configurations., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bismuthene - Tetrahedral DNA nanobioconjugate for virus detection

  • Enebral-Romero, Estefanía
  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • García-Martín, Adrián
  • Salagre, Elena
  • Michel, Enrique G.
  • Torres, Íñigo
  • Zamora, Félix
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work, we present an electrochemical sensor for fast, low-cost, and easy detection of the SARS-CoV-2 spike protein in infected patients. The sensor is based on a selected combination of nanomaterials with a specific purpose. A bioconjugate formed by Few-layer bismuthene nanosheets (FLB) and tetrahedral DNA nanostructures (TDNs) is immobilized on Carbon Screen-Printed Electrodes (CSPE). The TDNs contain on the top vertex an aptamer that specifically binds to the SARS-CoV-2 spike protein, and a thiol group at the three basal vertices to anchor to the FLB. The TDNs are also marked with a redox indicator, Azure A (AA), which allows the direct detection of SARS-CoV-2 spike protein through changes in the current intensity of its electrolysis before and after the biorecognition reaction. The developed sensor can detect SARS-CoV-2 spike protein with a detection limit of 1.74 fg mL-1 directly in nasopharyngeal swab human samples. Therefore, this study offers a new strategy for rapid virus detection since it is versatile enough for different viruses and pathogens., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B–I00) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). Estefanía Enebral-Romero thanks the financial support of “Nanotecnología para detección del SARS-CoV-2 y sus variantes. NANOCOV” project and a contract as a predoctoral researcher funded by grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández and Adrián García-Martín were supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022- 83rd and 66rd place, respectively). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. F. Z. acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M, PDC2021-120782-C21, and PID2022-138908NB-C31), the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. F.Z. also acknowledge support from the European Innovation Council under grant Agreement 101047081 (EVA). EGM acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and through grant PID2021-123295NB-I00. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-optical Particles in Isotropic Spinning Fields Mimic Magnetic Monopoles

  • Marqués, Manuel I.
  • Edelstein, Shulamit
  • Serena, Pedro A.
  • Castillo López de Larrinzar, Beatriz
  • García-Martín, Antonio
In contrast with the typical electric currents accelerated under the influence of a Coulombic force, there are only a few condensed matter examples of particles experiencing a force proportional to a constant, external magnetic field. In this Letter, we present a new alternative, based on an isotropic radiation spinning field and the magneto-optical effect, in which a particle is propelled by a magnetic field just like a magnetic monopole will do. This is a purely nonreciprocal effect as the reciprocal equivalent (a chiral dipole), despite presenting a dichroic response, does not experience any force when illuminated by the spinning field. The "magnetic charge" induced by impinging radiation on the magneto-optical dipole is found to depend linearly on the helicity of the field. In addition, this artificial monopole experiences a dichroic permanent optical torque and does not interact with an external electric field., We acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN), AEI, and FEDER (UE) through Projects No. PID2022-137569NB-C43, No. PID2022-137569NB-C41, and No. TED2021-131417B-I00 and the María de Maeztu Programme for Units of Excellence in R&D (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

β-Ketoenamine-linked covalent organic frameworks synthesized via gel-to-gel monomer exchange reaction: From aerogel monoliths to electrodes for supercapacitors

  • Martín-Illán, Jesús Á.
  • Sierra, Laura
  • Guillem-Navajas, Ana
  • Suárez, José Antonio
  • Royuela, Sergio
  • Rodríguez-San Miguel, David
  • Maspoch, Daniel
  • Ocón, Pilar
  • Zamora, Félix
Covalent organic frameworks (COFs) possess intrinsic nanoscale pores, limiting mass transport and impacting their utility in many applications, such as catalysis, supercapacitors, and gas storage, demanding efficient diffusion throughout the material. Hierarchical porous structures, integrating larger macropores with inherent micro-/meso-pores, facilitate rapid mass transport. Recently, the fabrication of aerogel monoliths is reported exclusively from imine-linked COFs, offering flexibility in aerogel composition. However, challenges in synthesizing robust β-ketoenamine-based COFs with comparable surface areas prompted innovative synthetic approaches. Leveraging the dynamic nature of COF bonds, in this work efficient monomer exchange from imine to partially β-ketoenamine-linked COFs within the gel phase is demonstrated. These aerogels can be transformed into electrodes using the compression technique. The new flexible electrodes-based β-ketoenamine-linked COF composites with C super P exhibit superior durability and redox activity. Through supercapacitor assembly, the β-ketoenamine-linked COF electrodes outperform their imine-based counterparts, showcasing enhanced capacitance (88 mF cm−2) and stability at high current densities (2.0 mA cm−2). These findings underscore the promise of β-ketoenamine-linked COFs for pseudocapacitor energy storage applications., This work was supported by the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M and CEX2023-001316-M), PDC2022-133498-I00, TED2021-129886B-C42, PID2019-106268GB-C32, PID2022-138908NB-C31, MAT2016-77608-C3-1-P, PCI2018-093081, PID2019-108028GB-C21, and RTI2018-095622-B-I00), and the Catalan AGAUR (project 2017 SGR 238). The authors acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, the Recovery, Transformation, and Resilience Plan, and NextGenerationEU from the European Union. This work was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diluted Yu-Shiba-Rusinov arrays on the anisotropic superconductor β-Bi2Pd

  • Trivini, Stefano
  • Ortuzar, Jon
  • Zaldívar, Javier
  • Herrera, Edwin
  • Guillamón, Isabel
  • Suderow, Hermann
  • Bergeret, F. Sebastian
  • Pascual, José I.
Magnetic adatoms on 𝑠-wave superconductors induce bound states inside the superconducting gap, called Yu-Shiba-Rusinov (YSR) states. The anisotropy of the Fermi surface determines the spatial extension of bound states in a quasi-two-dimensional superconductor. This is especially important in the diluted impurity limit since the orbital overlap determines the coupling of YSR states of neighboring atoms and the formation of the collective YSR system. Here, we build diluted arrays of Mn atoms with different dimensionalities on the (100) surface of 𝛽−Bi2⁢Pd and measure the evolution of their YSR spectra with the structure. We detect the coupling as a split of YSR peaks in subgap spectra and find that the split size increases with the number of atoms. The orientation of the structures along different directions of the 𝛽−Bi2⁢Pd substrate modulates the split and particle-hole asymmetry of the YSR states due to the anisotropic character of the Fermi surface, captured by the Green's function model. With the aid of the model, we found multiple YSR excitations in an extended 2D array of 25 Mn atoms, and we identified that their spatial distribution reflects a chiral local density of states., We acknowledge financial support from the Spanish MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF) through Grants No. PID2020-114071RB-I00, No. PID2020-114252GB-I00, No. PID2022-140845OB-C61, No. PID2023-148225NB-C31, No. CEX2020-001038-M, No. CEX2023-001316-M, No. TED2021-130292B-C42, and No. TED2021-130546B-I00, from the Basque Government through Grant No. IT-1591-22, and through the IKUR Strategy (collaboration agreement between the Department of Education of the Basque Government, Ikerbasque Foundation, MPC, CIC nanoGUNE, and DIPC), from the Diputación Foral de Gipuzkoa through Grant No. 2023-QUAN-000028-01, and from the Comunidad de Madrid through grant NANOMAGCOST-CM (Program No. S2018/NMT-4321), from the European Union's Horizon Europe research and innovation programme through Grant No. 101130224 (JOSEPHINE) and through ERC-AdG CONSPIRA (101097693). We also acknowledge collaborations through EU program Cost CA21144 (Superqumap). J.O. acknowledges the scholarship PRE-2021-1-0350 from the Basque Government., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photon antibunching in single-molecule vibrational sum-frequency generation

  • Moradi Kalarde, Fatemeh
  • Ciccarello, Francesco
  • Sánchez-Muñoz, Carlos
  • Feist, Johannes
  • Galland, Christophe
15 pages, 9 figures, 2 tables, Sum-frequency generation (SFG) enables the coherent upconversion of electromagnetic signals and plays a significant role in mid-infrared vibrational spectroscopy for molecular analysis. Recent research indicates that plasmonic nanocavities, which confine light to extremely small volumes, can facilitate the detection of vibrational SFG signals from individual molecules by leveraging surface-enhanced Raman scattering combined with mid-infrared laser excitation. In this article, we compute the degree of second order coherence (g (2)(0)) of the upconverted mid-infrared field under realistic parameters and accounting for the anharmonic potential that characterizes vibrational modes of individual molecules. On the one hand, we delineate the regime in which the device should operate in order to preserve the second-order coherence of the mid-infrared source, as required in quantum applications. On the other hand, we show that an anharmonic molecular potential can lead to antibunching of the upconverted photons under coherent, Poisson-distributed mid-infrared and visible drives. Our results therefore open a path toward bright and tunable source of indistinguishable single photons by leveraging "vibrational blockade" in a resonantly and parametrically driven molecule, without the need for strong light-matter coupling., This work has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement no. 820196 (ERC CoG QTONE) and from the Swiss National Science Foundation (project numbers 214993 and 198898). This work was also supported by Spanish Agencia Estatal de Investigación, Ministerio de Ciencia y Universidades (PID2023-149969NA-I00, PID2021-125894NB-I00, EUR2023-143478, CEX2023-001316-M – through the María de Maeztu program for Units of Excellence in R&D), Comunidad de Madrid (Proyecto Sinergico CAM2020Y2020/TCS-6545), European Union (101070700)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superoxide anion (O2-) collisions with CO2 molecules in the energy range of 50-950 eV

  • Guerra, Carlos
  • Leiferman, M.
  • Lozano, Ana I.
  • Aguilar-Galindo, F.
  • Díaz-Tendero, S.
  • Oller, Juan C.
  • Limão-Vieira, P.
  • García, Gustavo
8 pages, 8 figures, 3 tables, A novel gas-phase molecular scattering study is reported for O2- collisions with CO2 for impact energies ranging from 50 to 950 eV in the lab frame. The absolute total electron detachment, relative total, and partial ionization cross sections have been measured within this energy range together with the positive ion yields. The primary anionic beam projectile is produced in a pulsed hollow cathode discharge induced plasma, and its interactions with the neutral molecular target occur in a gas cell at a well-known constant pressure. For impact energies above 500 eV, high mass (m > 44 u) charged complexes have been detected. With the aid of a theoretical study using ab initio methods, we propose a mechanism to infer the formation of these cationic species, which have been assigned to projectile-target stable compounds (CO3+ and CO4+)., The authors acknowledge the generous allocation of computer timeat the Centro de Computación Científica at the Universidad Autónoma de Madrid(CCC-UAM).This work was partially supported by MICINN (Spanish Ministry of Science and Innovation) Project Nos. PID2019-104727RB-C21and PID2022138470NB-I00 funded by MCIN/AEI/10.13039/501100011033 and the “María de Maeztu” (Grant No.CEX2023-001316-M) Program for Centers of Excellence in RD. This study has been performed within the framework of the 21GRD02 BIOSPHERE project supported by the European Association of National Metrology Institutes (EURAMET)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic field screening of 2D materials revealed by magnetic force microscopy

  • Aldave, Diego A.
  • López-Polín, Guillermo
  • Calle, Esther
  • Begué Gracia, Adrián
  • Ranchal, Rocío
  • Martínez, Raúl
  • Bran, Cristina
  • Burzurí, Enrique
  • Gómez-Herrero, Julio
  • Ares, Pablo
  • Jaafar, Miriam
2D materials possess exceptional mechanical properties making them promising candidates for protecting nanostructures. However, the magnetic field screening properties of 2D materials are largely unexplored. Here it is used Magnetic Force Microscopy (MFM) to unveil the effects on the magnetic field of magnetic nanostructures when 2D materials are placed on top of them. It is demonstrated that while graphene exhibits a weak diamagnetic response due to its unique electronic structure around the Dirac point, the overall screening effect remains minimal (≈0.5% per layer). Conversely, graphene oxide (GO) and MoS2 show negligible response to the magnetic field, making them ideal for applications where preserving the original magnetic properties is crucial. These findings suggest that 2D materials can offer effective protection while minimally affecting the underlying magnetic functionalities, important for data storage technologies and spintronics., This research was funded by the Spanish Ministry of Science, Innovation and Universities & the State Research Agency MICIU/AEI/10.13039/501100011033, grant numbers PID2021-122980OA-C53, PID2021-122980OB-C51 (AEI/FEDER), PID2021-123295NB-I00, PID2022-138908NB-C32, PID2022-142331NB-I00, TED2021-130957B-C55, TED2021-132219A-I00, CNS2023-143713, Ramon y Cajal fellowship RYC2020-030302-I, and "Maria de Maeztu" Programme for Units of Excellence in R&D (CEX2023-001316-M) A. B. would like to acknowledge the funding received from the Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship. Special mention should be made of the Fundacion Max Mazin, which in collaboration with the CSIC, has made it possible for R. M. to participate in this project., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advancing diagnostics with BODIPY-bismuthene DNA biosensors

  • Gutiérrez-Gálvez, Laura
  • Enebral-Romero, Estefanía
  • Valle Amores, Miguel Ángel
  • Pina Coronado, Clara
  • Torres, Iñigo
  • López-Diego, David
  • Luna, Mónica
  • Fraile, Alberto
  • Zamora, Félix
  • Alemán, José
  • Álvarez, Jesús
  • Capitán, M. J.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
In this work, an electrochemical biosensor is prepared based on few-layer bismuthene hexagons (FLBHs) and a water-soluble BODIPY (BDP) derivative (BDP-NaSO3) for early infection diagnosis. In particular, the detection in advance of a virus sequence in nasopharyngeal swab samples was developed. The combination of the FLBHs and BDP-NaSO3 facilitates the direct, sensitive, and specific detection of gene viruses without the need for any prior amplification step. This work demonstrates that the FLBHs provide an improved electrochemical platform for immobilizing thiolated DNA capture probes that increase the sensitivity of the biosensor, while BDP-NaSO3 serves as a newly powerful electrochemical indicator of the hybridization event. As a proof of concept, SARS-CoV-2 was selected as the model virus. The developed biosensor demonstrated selective, rapid, and straightforward detection of the specific sequence RNA-dependent RNA-polymerase (RdRp) of SARS-CoV-2 with a detection limit of 4.97 fM and a linear range from 16.6 fM to 100 fM. Furthermore, this platform successfully detects the virus directly in nasopharyngeal swab samples with a viral load of at least 19 Cts without being subjected to any prior amplification stage. Finally, the high stability of the biosensor response, which has been working under ambient conditions for over one month, the selectivity and rapidity for specific virus detection, and the requirement of low-volume samples for the determination are remarkable characteristics that make it ideal for its potential application in clinical diagnosis in point-of-care settings., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, PID2023-150844OB-I00, PID2022- 138908NB-C31, and PID2021-122299NB-I00), the Community of Madrid (REACT-UE NANOCOV-CM and Y2020/NMT6469), the Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, TED2021-130470B-I00, and TED2021- 129999B-C32) and the “María de Maeztu” Programme for Units of Excellence in R&D, CEX2023-001316-M. Laura Gutiérrez-Gálvez gratefully acknowledges the financial support of a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Estefanía Enebral-Romero received financial support from the “Nanotecnología para detección del SARS-CoV-2 y sus variantes, NANOCOV” project and a contract as a pre-doctoral researcher funded by a grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. We also acknowledge María U. González and Raquel Alvaro for their help with fluorescence microscopy and EDAX mapping, respectively, and the services of the MiNa Laboratory at IMN and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE). We also acknowledge the “Servicio de Microbiología, Hospital Universitario Ramón y Cajal and Instituto Ramón y Cajal de Investigación Sanitaria (IRYCIS)” for providing the clinical samples. We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid by the Recovery, Transformation and Resilience Plan and by NextGenerationEU from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-Range Interactions in Weyl-Dense Atomic Arrays Protected from Dissipation and Disorder

  • García-Elcano, Iñaki
  • Huidobro, Paloma A.
  • Bravo-Abad, Jorge
  • González-Tudela, A.
7pages, 3 figures, Long-range interactions are a key resource in many quantum phenomena and technologies. Free-space photons mediate power-law interactions but lack tunability and suffer from decoherence processes due to their omnidirectional emission. Engineered dielectrics can yield tunable and coherent interactions, but typically at the expense of making them both shorter ranged and sensitive to material disorder and photon loss. Here, we propose a platform that can circumvent all these limitations based on three-dimensional subwavelength atomic arrays subjected to magnetic fields. Our key result is to show how to design the polaritonic bands of these atomic metamaterials to feature a pair of frequency-isolated Weyl points, i.e., points in reciprocal space around which the bands disperse linearly and defining monopoles of the Berry curvature. As predicted by recent works, such Weyl excitations can mediate interactions that are simultaneously long range, due to their gapless nature; robust, due to the topological protection of Weyl points; and decoherence-free, due to their subradiant character. We demonstrate the robustness of these isolated Weyl points for a large regime of interatomic distances and magnetic field values and characterize the emergence of their corresponding Fermi arcs surface states. The latter can lead to two-dimensional, nonreciprocal atomic interactions with no analogue in other chiral quantum optical setups., A.G.-T. and I.G.-E. acknowledge support from the Proyecto Sinergico CAM 2020 Y2020/ TCS-6545 (NanoQuCo-CM), the CSIC Research Platform on Quantum Technologies PTI-001 and from Spanish projects PID2021-127968NB-I00 funded by MICIU/AEI/ 10.13039/501100011033/ and by FEDER Una manera de hacer Europa funded by MICIU/AEI/10.13039/ 501100011033. A.G.-T. also acknowledges a 2022 Leonardo Grant for Researchers and Cultural Creators, the BBVA Foundation, and support from the QUANTERA project MOLAR with reference PCI2024-153449 and funded MICIU/AEI/10.13039/501100011033 and by the European Union. P.A.H. and J.B.-A. acknowledge funding through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). P.A.H. acknowledges funding from the Spanish Ministry for Science and Innovation (Grant No. RYC2021-031568-I and Project No. PID2022-141036NA-I00 financed by MCIN/AEI/10.13039/501100011033 and FSE+) and the Fundaçao para la Cîencia e a Tecnologia under Project No. 2022.06797.PTDC. J.B.-A. acknowledges support from Grant No. PID2022-139995NB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge Compensation Mechanisms in Ni-Rich NMC Cathodes

  • Díaz-Sánchez, Jesus
  • Ellingsen, Ingeborg S.
  • Salagre, Elena
  • Sánchez-Prieto, Jesús
  • Maldonado, Noelia
  • Galindo, Arturo
  • Morant, Carmen
  • Vasco, Enrique
  • Garcia, Gastón
  • Rettenwander, Daniel
  • Rubio-Zuazo, Juan
  • Michel, Enrique G.
  • Polop, Celia
11 pages and 6 figures, Understanding charge compensation mechanisms in nickel-rich lithium nickel–manganese–cobalt alloy oxide (NMC) cathodes is crucial for optimizing their electrochemical performance. This study employs complementary spectroscopic techniques with varying probing depths, including X-ray absorption near-edge structure spectroscopy, hard X-ray photoemission spectroscopy, X-ray photoelectron spectroscopy, and ion beam analysis, to investigate the correlation between transition metal oxidation states and Li depth profile in NMC811. This approach reveals different charge compensation mechanisms depending on the local Li content, which exhibits near-surface gradients. The results show that Ni oxidation is the main charge compensation mechanism for moderate delithiations at a Li stoichiometry x > 0.35. When the Li content drops below the threshold x = 0.3, which occurs near the surface for high state of charge (SOC), compensation by Ni/Li mixing prevails. Meanwhile, the Li-depleted surface (with x ≪ 0.3) shows evidence of transformation into electrochemically inactive Li-free cubic phases. The voltage window used to cycle the NMC811 prevents the bulk Li content from falling below x = 0.35, so the different charge compensation mechanisms coexist for high SOCs, allowing to compare between their kinetics. This study contributes to a comprehensive understanding of the electrochemical behavior of nickel-rich NMCs, aiding the development of high-energy Li-ion batteries with improved stability., This work has been supported by the SOLIMEC project funded by the M-ERA.NET Call 2021 and by the Spanish Agencia Estatal de Investigación (PCI2022-132998, PCI2022-132955, and PID2021– 124667OB-I00 NanoCatCom project). The authors acknowledge support from the Spanish Ministry of Science, Innovation and Universities through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). The authors also acknowledge the support from the Center for Micro-Analysis of Materials (CMAM) - Universidad Autónoma de Madrid for the beamtime with code STD011/23 and its technical staff for their contribution to the operation of the accelerator, and from ReMade@ARI support. The authors are grateful to the the SpLine of the European Synchrotron Radiation Facility (ESRF) for the beamtimes with codes A25-2-1048 and A25-2-1072 and to the Instituto de Micro y Nanotecnología IMN-CNM (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Roadmap for Photonics with 2D Materials

  • García de Abajo, Francisco Javier
  • Basov, D. N.
  • Koppens, Frank H. L.
  • Polini, Marco
  • Gonçalves, P. A. D.
  • Jacob, Zubin
  • Schuck, P. J.
  • Mugarza, Aitor
  • Tizei, Luiz H. G.
  • Menon, Vinod
  • Deilmann, Thorsten
  • Abate, Yohannes
  • Chervy, Thibault
  • Dal Conte, Stefano
  • Lienau, Christoph
  • Sun, Zhipei
  • Rozema, Lee A.
  • Alù, Andrea
  • Cox, Joel D.
  • Soavi, Giancarlo
  • Wu, Shiwei
  • Song, Justin C. W.
  • Kaminer, Ido
  • Giessen, Harald
  • Stauber, Tobias
  • Alonso-González, Pablo
  • Groep, Jorik van de
  • Boltasseva, Alexandra
  • Shalaev, Vladimir M.
  • Petek, Hrvoje
  • Mkhitaryan, Vahagn
  • Dai, Qing
  • Sternbach, Aaron
  • Koperski, Maciej
  • Novotny, Lukas
  • Vitiello, Miriam Serena
  • Patanè, Amalia
  • Xia, Fengnian
  • Burch, Kenneth S.
  • Merino, Pablo
  • Cuxart, M. G.
  • Chávez-Angel, Emigdio
  • Krishna Kumar, Roshan
  • Sánchez Sánchez, Miguel
  • Álvarez-Pérez, Gonzalo
  • Martín-Moreno, Luis
  • Nikitin, Alexey Y.
  • Ortega, J. Enrique
et al., Triggered by advances in atomic-layer exfoliation and growth techniques, along with the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or a few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals now constitute a broad research field expanding in multiple directions through the combination of layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary subset of those directions, where 2D materials contribute remarkable nonlinearities, long-lived and ultraconfined polaritons, strong excitons, topological and chiral effects, susceptibility to external stimuli, accessibility, robustness, and a completely new range of photonic materials based on layer stacking, gating, and the formation of moiré patterns. These properties are being leveraged to develop applications in electro-optical modulation, light emission and detection, imaging and metasurfaces, integrated optics, sensing, and quantum physics across a broad spectral range extending from the far-infrared to the ultraviolet, as well as enabling hybridization with spin and momentum textures of electronic band structures and magnetic degrees of freedom. The rapid expansion of photonics with 2D materials as a dynamic research arena is yielding breakthroughs, which this Roadmap summarizes while identifying challenges and opportunities for future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners., This work has been supported in part by the funding sources listed here (grant numbers in parentheses). Section 2: European Research Council (ERC) (101141220 QUEFES); Spanish Ministry of Science, Innovation, and Universities (MICIN) (CEX2019-000910-S). Section 3: Gordon and Betty Moore Foundation (GBMF) (12212); Generalitat de Catalunya and European Social Fund-FEDER. Section 4: Italian Ministry of University and Research (PRIN 2020 2020JLZ52N); European Union (EU) (101131579, 873028). Section 5: Portuguese Foundation for Science and Technology (UIDB/04650/2020, COMPETE 2020, PORTUGAL 2020, FEDER, PTDC/FIS-MAC/2045/2021); Independent Research Fund Denmark (IRFD) (2032-00045B); Danish National Research Foundation (DNRF) (165). Section 6: Office of Naval Research (ONR) (N00014231270). Section 7: U.S. Department of Energy, Office of Science, Basic Energy Sciences (DOE) (DE-SC0019443). Section 8: Catalan CERCA; MICIN (CEX2021-001214-S, PID2022-140845OB-C63, CNS2022-135658, TED2021-132388B-C41, PID2021-125309OA-100, TED2021-129416A-I00); EU (PRTR-C17.I1); Comunidad de Madrid (TEC-2024/TEC-459, SINMOLMAT-CM); CSIC (20226AT011); CSIC and Czech Academy of Sciences (CAS) (BILAT23033/CSIC-24-10); CAS (GAČR 22-18718S). Section 9: French National Agency for Research (ANR) (ANR-20-CE42-0020). Section 10: F.D.: Emmy Noether Program (ENP) (534078167); H.D.: GBMF (10694), ONR (N00014-21-1-2770); C.S.: German Research Society (DFG) (SPP 2244 project SCHN1376 14.2); V.M.M.: GBMF (12764), ONR (W911NF-22-1-0091). Section 11: T.D.: DFG (426726249, DE 2749/2-1, DE 2749/2-2); A.C.: DFG (314695032 (SFB 1277 B05), 417590517 (SFB 1415 B11), 390858490 (EXC 2147 ct.qmat)), ERC (101001764 CoulENGINE); K.S.T.: Novo Nordisk Foundation Challenge Programme 2021 (BIOMAG NNF21OC0066526); K.S.T.: VILLUM FONDEN (37789). Section 12: Y.A.: Air Force Office of Scientific Research (AFOSR) (FA9550-23-1-0375), GBMF (12246); V.K.S. and M.C.H.: Northwestern University (NSF DMR-2308691); M.T.: AFOSR (FA9550-23-1-0447), National Science Foundation (NSF) (DMREF 2323296). Section 13: X.C.: DOE (BES MSE QIS FWP #100740); T.F.H.: DOE (BES CSGB AMOS FWP #SCW0063); L.Y.: DOE (Q-NEXT DE-AC02-76SF00515). Section 14: EU (IR0000016, ID D2B8D520, CUP B53C22001750006, 101130384, HORIZONEIC-2023-PATHFINDEROPEN-01, QUONDENSATE, M4C2-2022LA3TJ8 - CUP D53D23002280006, MSCA-2021 101066108, NQSTI PE00000023-q-ANTHEM-CUP H43C22000870001). Section 15: DFG (Li 580/16-1, DE 3578/3-1, SFB1372/2-Sig01, RTG1885, INST 184/163-1, INST 184/164-1); Niedersächsisches Ministerium für Wissenschaft and Kultur and Volkswagen Foundation (SMART, DyNano, Wissenschaftsraum ElLiKo). Section 16: Research Council of Finland (RSF) (353364, 360411, 359009, 365686, 367808, 320167, PREIN); EU (MSCA-RISE-872049 IPN-Bio, 101155089, ALTOS); ERC (834742). Section 17: DOE (DE-SC0019443). Section 18: IRFD (0165-00051B); DNRF (165); ERC (101141220-QUEFES). Section 19: DFG (CRC 1375 NOA, 398816777 C4, IRTG 2675 ‘Meta-Active’ 437527638 A4); Federal Ministry for Education and Research (BMBF) (16KIS1792 SiNNER). J.W.: DFG (ENP 503985532, CRC 1277-314695032 A03, RTG 2905-502572516). Section 20: National Key Research and Development Program of China (NKRDPC) (2024YFA1409800); National Natural Science Foundation of China (NNSFC) (12034003). Section 21: Singapore Ministry of Education (MOE) (MOE- T2EP50222-0011, MOE- MOET32023-0003). Section 22: ERC (101125662 QinPINEM), Israel Science Foundation (385/23); Hellen Diller Quantum Center; I.K.: GBMF (11473 iQCE); S.T.: Israeli Academy of Science and Humanities (Yad Hanadiv Foundation Rothschild), Israel Council for Higher Education (VATAT-Quantum), Technion (Viterbi). Section 23: DFG; BMBF; Vector-Stiftung; Zeiss-Stiftung; EU. Section 24: MICIN (PID2023-146461NB-I00, CEX2023-001316-M). Section 25: J.D.: Beijing Natural Science Foundation (Z240005), NNSFC (12474027); A.A.: ONR, Simons Foundation (SF); J.DC. ONR MURI (N0001-23-1-2567); A.Y.N.: MICIN (PID2023-147676NB-I00), Basque Department of Education (PIBA-2023-1-0007); P.A.-G.: ERC (101044461 TWISTOPTICS), MICIN (PID2022-141304NB-I00). Section 26: A.Y.N., P.A.G., and L.M.-M.: MICIN (PID2023-147676NB-I00, PID2022-141304NB-I00, PID2023-148359NB-C); L.M.-M.: Aragon Government (Q-MAD);. P.A.-G.: ERC (101044461, TWISTOPTICS); A.A.: ONR (N00014-2212448);. J.D.C and T.L.: ONR MURI (N0001-23-1-2567). Section 27: Department of Defense; NSF; SF. Section 28: J.v.d.G.: Dutch Science Foundation (VI.Vidi.203.027), ERC (101116984); T.S.: 2D-TECH VINNOVA Competence Center (ref.2019-00068); D.J.: ONR (N00014-23-1-203). Section 29: I.V.B.: U.S. Army Research Office (W911NF2310206); A.B. and V.M.S.: DOE (DE-SC0017717); AFOSR (FA9550-20-1-0124). Section 30: Purdue team: ONR (N00014-21-1-2026); J.S.: NSF (Graduate Research Fellowship DGE-1842166). Section 31: H.P.: NSF (CHE-2102601); S.T.: CAS (YSBR-054). Section 32: ERC (101141220 QUEFES); MCINN (CEX2019-000910-S, PID2022-137569NB-C42). Section 33: RCF (353364, 360411, 359009, 365686, 367808, Flagship Programme 320167 PREIN); EU (MSCA-RISE-872049 IPN-Bio); Jane and Aatos Erkko Foundation; Technology Industries of Finland Centennial Foundation (Future Makers 2022); ERC (834742); NNSFC (12374167, 12422406); NKRDPC (2022YFA1403500). Section 34: NNSFC (51925203, U2032206, 52072083, 51972072, 2021YFA1201500). Section 35: Y.Z.: DOE (DE-SC-0022885). Section 36: MOE (EDUN C-33-18-279-V12, I-FIM, MOE-T2EP50122-0012); AFOSR and ONR (FA8655-21-1-7026); MAT-GDT Program at A*STAR (M24N4b0034). Section 37: Swiss National Science Foundation (200021-227862). Section 38: ERC (101157731 Terascan); EU (EXTREME IR 944735, Graphene Flagship core 3, 101070546, PE0000023-NQSTI. Section 39: Defense Science and Technology Laboratory and Engineering and Physical Sciences Research Council (EP/T019018/1, EP/X524967/1). Section 40: ONR; NSF; Government of Israel. Section 41: P.W.: AFOSR (FA8655-20-1-7030 PhoQuGraph, FA8655-23-1-7063 TIQI); Austrian Science Fund (FWF 10.55776/F71); Austrian Federal Ministry of Labour and Economy; Christian Doppler Research Association; L.A.R.: Erwin Schrödinger Center for Quantum Science & Technology (ESQ Discovery). Section 42: K.S.B.: NSF (EPMD EPMD-2211334), DOE (DE-SC0018675); L.Z.: DOE (DE-SC0024145), NSF CAREER (DMR-174774); V.M.M.: DOE (DE-SC0025302); X.X.: DOE (DE-SC0018171), AFOSR MURI (FA9550-19-1-0390)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing band-hybrid Cooper pairs on the surface of a superconductor with spin-orbit coupling

  • Zaldívar, Javier
  • Ortuzar, Jon
  • Alvarado, Miguel
  • Trivini, Stefano
  • Baumard, Julie
  • Rubio-Verdú, Carmen
  • Herrera, Edwin
  • Suderow, Hermann
  • Levy Yeyati, Alfredo
  • Bergeret, F. Sebastian
  • Pascual, José I.
Most superconductors exhibit spin-singlet pairing within a single band. In multiband systems with strong spin-orbit coupling, more exotic scenarios can emerge, including Cooper pairs between bands with distinct symmetries. Here, we present evidence of the formation of Cooper pairs between spin-nondegenerate helical surface bands in the superconductor 𝛽−Bi2⁢Pd. Scanning tunneling microscopy reveals anisotropic Yu-Shiba-Rusinov (YSR) resonances induced by vanadium impurities, with long-range amplitude modulations attributed to spin-conserving Bogoliubov quasiparticle interference (BQPI). Analysis of BQPI at the subgap YSR energy shows that only a selective subset of normal-state scattering processes contributes to Cooper pair formation, indicating interband mixing. We trace this selectivity to the hybridization of a helical surface band with others via the impurity., We acknowledge financial support from the Spanish MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF) through Grants No. PID2020-114071RB-I00, No. PID2020–114252 GB-I00, No. PID2022-140845OB-C61, No. PID2023-148225NB-C31, No. PID2023-150148OB-I00, No. CEX2020-001038-M, No. CEX2023-001316-M, No. TED2021-130292B-C41, and No. TED2021-130546B-I00, from the Basque Government through Grant No. IT-1591-22, from the European Union NextGenerationEU/PRTR-C17.I1 through the IKUR Strategy of the Department of Education of the Basque Government under a collaboration agreement with Ikerbasque MPC, CIC nanoGUNE, and DIPC, and from the European Union’s Horizon Europe through Grant JOSEPHINE (No. 101130224) and through ERC-AdG CONSPIRA (No. 101097693). H. S. and E. H. acknowledge the QUASURF project (ref. SI4/PJI/2024-00199) funded by the Comunidad de Madrid through the agreement to promote and encourage research and technology transfer at the Universidad Autónoma de Madrid. We also acknowledge collaborations through EU program Cost CA21144 (Superqumap). J. O. acknowledges the scholarship PRE-2021-1-0350 from the Basque Government., CEX2020-001038-M, CEX2023-001316-M, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Optoelectronic Properties of Benzylammonium PbI4Hybrid Perovskites

  • Gouadria, Hamida
  • Aguilar-Galindo, Fernando
  • Spilsbury, Michael J.
  • Cano, Rafael
  • de Miguel, Juan José
  • Fraile, Alberto
  • Alemán, José
  • Álvarez-Alonso, Jesús
  • Díaz-Tendero, Sergio
  • Capitán, M. J.
16 pages, 9 figures, 5 tables, We present a joint theoretical–experimental study of perovskites formed by benzylammonium derivatives and PbI<inf>4</inf>. The materials were synthesized with a slow evaporation method and subsequently characterized by combining three experimental techniques: X-ray diffraction, X-ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy. Changes in the electronic structure in response to stimulation with visible light were also studied. Simulations were carried out within the framework of density functional theory. In the structural characterization, we have seen that these are layered materials showing alternating organic and inorganic planes with stoichiometry of (XBA)<inf>2</inf>PbI<inf>4</inf>, where XBA is a benzylammonium derivative. The ammonium salt varies from one perovskite to another, considering several functional groups in the para position of the benzylamine ring (X = −H, −CH<inf>3</inf>, −OCH<inf>3</inf>, and −CF<inf>3</inf>). We have observed shifts in the Pb 4f, I 3d, C 1s, and N 1s photoemission spectra near the Fermi level, which allow to identify changes in the electronic structure of the perovskites with different organic parts. We attribute such observed changes to the nature of the functional group, in particular, to the permanent dipole exerted by the benzylammonium derivative, and therefore, we conclude that the optoelectronic properties of hybrid perovskites can be modified on demand by altering the electron-withdrawing nature of the organic substituent. Furthermore, the layered structure, separation of charges over long distances (large interplanar distance), and semiconducting properties make it a material in which two-dimensional electron confinement effects are expected to appear after photoexcitation, thus exhibiting a large transient photocurrent effect under visible light illumination and making it an optimal material for optoelectronic devices., The authors acknowledge the generous allocation of computer time at the Centro de Computación Científica at the Universidad Autónoma de Madrid (CCC-UAM). This work was partially supported by the MICINN�Spanish Ministry of Science and Innovation�Projects PID2022-138470NB-I00, TED2021-131042B-I00, PID2021-123295NB-I00, PID2021122299NB-I00, TED2021-130470B-I00, and TED2021129999B-C32 funded by MCIN/AEI/10.13039/ 501100011033, the Comunidad de Madrid and Universidad Autónoma through the LAPRASS project (SI4/PJI/202400180), and the María de Maeztu Programme for Units of Excellence in R & D (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From local to collective superconductivity in proximitized graphene

  • Trivini, Stefano
  • Kokkeler, Tim
  • Ortuzar, Jon
  • Cortés-del Río, Eva
  • Viña-Bausá, Beatriz
  • Mallet, Pierre
  • Veuillen, Jean-Yves
  • Cuevas, Juan Carlos
  • Brihuega, Iván
  • Bergeret, F. Sebastian
  • Pascual, José I.
The superconducting proximity effect induces pairing correlations in metallic systems via Andreev scattering. This effect is particularly intriguing in graphene as it enables two-dimensional superconductivity that is tunable through doping. Understanding how superconducting correlations propagate within the metal is crucial to unveiling the key factors behind this tunability. Here, we employ scanning tunneling microscopy to investigate the energy and length scales of the proximity effect induced by Pb islands on graphene. Using tip-induced manipulation, we assemble S/N/S junctions with tunable N-region spacing and explore the evolution of the proximitized state in the confined normal region. We find that different doping levels can lead to either localized or collective superconducting states. By combining our experimental results with quasiclassical theory, we demonstrate that interface conductance plays a key role in determining the strength and coherence length of pairing correlations and interisland coupling. Our findings provide new insights into the design of novel superconducting states and the control of their properties., We acknowledge financial support from the Spanish MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF) through grants PID2022-140845OB-C61, PID2023-148225NB-C31, PID2023-149106NB-I00, CEX2020-001038-M, CEX2023-001316-M, and TED2021-130292B-C42, from the Basque Government through grant IT-1591-22, from the European Union NextGenerationEU/PRTR-C17.I1 through the IKUR Strategy of the Department of Education of the Basque Government under a collaboration agreement with Ikerbasque MPC, CIC nanoGUNE, and DIPC, from the Comunidad de Madrid and the Spanish State through the Recovery, Transformation and Resilience Plan [Materiales Disruptivos Bidimensionales (2D), (MAD2DCM)-UAM Materiales Avanzados], and from the European Union’s Horizon Europe through grant. J.O. acknowledges the scholarship PRE-2021-1-0350 from the Basque Government. B.V. acknowledges funding from the Spanish Ministerio de Universidades through the PhD scholarship No. FPU22/03675. E.C.R. acknowledges funding from the Alexander von Humboldt Foundation via the Henriette Herz program., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Floquet-Nambu theory of electron quantum optics with superconductors

  • Burset, Pablo
  • Roussel, Benjamin
  • Moskalets, Michael
  • Flindt, Christian
We present a comprehensive Floquet-Nambu theory to describe the time-dependent quantum transport in mesoscopic circuits involving superconductors. The central object of our framework is the first-order correlation function, which accounts for the excitations that are generated by a time-dependent voltage and their coherent scattering off the interface with a superconductor. We analyze the time-dependent current generated by periodic voltage pulses and how it depends on the excitation energies of the voltage drive compared to the gap of the superconductor. Our general formalism allows us to identify the conditions for the excitations that are scattered off the superconductor to become coherent electron-hole superpositions. To this end, we consider the purity of the outgoing states, which characterizes their ability to carry quantum information. To illustrate our formalism, we apply it to a system composed of chiral quantum Hall edge states connected to a superconductor, and we calculate the current in the outgoing lead and the purity of the outgoing states for Lorentzian and harmonic voltage drives. Our framework paves the way for systematic investigations of time-dependent scattering problems involving superconductivity, and it may help interpret future experiments in electron quantum optics with superconductors., We thank A. A. Clerk, P. Dutta, and J. Keeling for valuable discussions. The work was supported by Spanish CM “Talento Program” Project No. 2019-T1/IND-14088 and No. 2023-5A/IND-28927; the Agencia Estatal de Investigación Projects No. PID2020-117992GA-I00, No. PID2024-157821NB-I00, and No. CNS2022-135950; and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M); the CSIC/IUCRAN2022 under Grant No. UCRAN20029; and Research Council of Finland through the Finnish Centre of Excellence in Quantum Technology (Project No. 352925)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emergent magnetic structures at the 2D limit of the altermagnet MnTe

  • Cuxart, M. G.
  • Robles, Roberto
  • Muñiz Cano, Beatriz
  • Gargiani, Pierluigi
  • Rebanal, Clara
  • Di Bernardo, Iolanda
  • Amiri, Alireza
  • Calleja, Fabián
  • Garnica, Manuela
  • Valbuena, Miguel A.
  • Vázquez de Parga, Amadeo L.
MnTe has recently emerged as a canonical altermagnet, a newly identified class of magnetism characterized by compensated antiferromagnetic order coexisting with spin-split electronic bands, traditionally considered exclusive to ferromagnets. However, the extent to which altermagnetism persists as altermagnets are thinned to the 2D limit remains largely unexplored. Here, the magnetic behavior of two-dimensional (2D) MnTe is investigated, specifically atomically-thin monolayers (MLs) and bilayers (BLs) grown on graphene/Ir(111) substrate, by combining experimental scanning tunneling microscopy, X-ray photoelectron microscopy, X-ray absorption spectroscopy, and X-ray magnetic circular dichroism with density functional theory calculations. It is found that while ML and BL MnTe adopt atomic structures with symmetries incompatible with altermagnetism, they exhibit intriguing magnetic phases: the BL forms a highly-robust layered antiferromagnet with in-plane spin anisotropy, whereas the ML presents characteristics compatible with spin-glass behavior below its freezing temperature, a phenomenon not previously observed in an atomically thin material. These findings highlight how reduced dimensionality can promote the emergence of unusual magnetic structures distinct from those of their 3D counterparts, providing new insights into low-dimensional magnetism., This work was supported by the Spanish Ministry of Science and Innovation and the European Union, Grant Nos. PID2021-123776NB-C21 (CONPHASETM), PID2021-128011NB-I00 and PID2024-157655NB-I00. Comunidad de Madrid through grant “Materiales Disruptivos Bidimensionales (2D)” MAD2D-CM-UAM. Financial support from MAD2D-CM projects — MRR MATERIALES AVANZADOS-IMDEA-NC and MRR MATERIALES AVANZADOS-UAM — is also acknowledged. IMDEA Nanociencia and IFIMAC acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centres of Excellence in R& D (Grant CEX2020-001039-S) and “María de Maeztu” (Grant CEX2023-001316-M) Programme for Units of Excellence in R& D, respectively. M.G.C. acknowledges funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101034431 (IDEAL programme) and financial support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. M.G. acknowledges financial support through the “Ramón y Cajal” Fellowship program (RYC2020-029317-I) and the “Ayudas para Incentivar la Consolidación Investigadora” programme (CNS2022-135175). Financial support through the “Soluciones sostenibles del NanoMAGnetismo para TIC” (Mag4TIC-CM) is acknowledged. I.D.B. acknowledges funding from the European Union's Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement no.101063547 (STORM) and support from the “Ramón y Cajal” program, grant no. YC2022-035562-I. We acknowledge beam time on BOREAS (BL29) beam line at ALBA Synchrotron under proposal 2023027388, and beam line scientist Dr. M. Valvidares for his supportive commitment to the project., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Demand and Tunable Andreev Conversion of Single-Electron Charge Pulses

  • Burset, Pablo
  • Roussel, Benjamin
  • Moskalets, Michael
  • Flindt, Christian
Electron quantum optics explores coherent single-electron charge pulse propagation in electronic nanoscale circuits akin to tabletop photon setups. While past experiments focused on normal-state conductors, incorporating superconductors holds promise for exploiting the electron-hole degree of freedom in quantum sensing applications and quantum information processing. Here, we propose and analyze an on-demand and tunable mechanism for converting single-electron pulses into holes through Andreev processes on a superconductor. We develop a Floquet-Nambu scattering formalism to demonstrate the dynamic conversion of charge pulses and the controllable generation of coherent electron-hole superpositions through interferometric magnetic flux control based on the chiral edge states of a quantum Hall sample. Our discussion covers optimal conditions in realistic scenarios, affirming the feasibility of our proposal with current technology., The work was supported by the Spanish CM “Talento Program,” Projects No. 2019-T1/IND-14088 and No. 2023-5A/IND-28927; by the Agencia Estatal de Investigación, Projects No. PID2020-117992GA-I00, No. PID2024-157821NB-I00, and No. CNS2022-135950; and through the “María de Maeztu” Program for Units of Excellence in R&D (No. CEX2023-001316-M), the CSIC/IUCRAN2022 under Grant No. UCRAN20029, and the Research Council of Finland through the Finnish Centre of Excellence in Quantum Technology (Project No. 352925)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2023-001316-M)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Demand and Tunable Andreev Conversion of Single-Electron Charge Pulses

  • Burset, Pablo
  • Roussel, Benjamin
  • Moskalets, Michael
  • Flindt, Christian
8 pages, 3 figures. V2: changed title, revised text, added references, updated Figure 3., Electron quantum optics explores coherent single-electron charge pulse propagation in electronic nanoscale circuits akin to table-top photon setups. While past experiments focused on normal-state conductors, incorporating superconductors holds promise for exploiting the electron-hole degree of freedom in quantum sensing applications and quantum information processing. Here, we propose and analyze an on-demand and tunable mechanism for converting single-electron pulses into holes through Andreev processes on a superconductor. We develop a Floquet-Nambu scattering formalism to demonstrate the dynamic conversion of charge pulses and the controllable generation of coherent electron-hole superpositions through interferometric magnetic flux control based on the chiral edge states of a quantum Hall sample. Our discussion covers optimal conditions in realistic scenarios, affirming the feasibility of our proposal with current technology., The work was supported by the Spanish CM “Talento Program,” Projects No. 2019-T1/IND-14088 and No. 2023-5A/IND-28927; by the Agencia Estatal de Investigación, Projects No. PID2020-117992GA-I00, No. PID2024-157821NB-I00, and No. CNS2022-135950; and through the “María de Maeztu” Program for Units of Excellence in R&D (No. CEX2023-001316-M), the CSIC/IUCRAN2022 under Grant No. UCRAN20029, and the Research Council of Finland through the Finnish Centre of Excellence in Quantum Technology (Project No. 352925)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2023-001316-M)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glycans Modulate the Adsorption of RBD Glycoproteins on Polarizable Surfaces

  • Bosch-Fernández, Antonio M.
  • Menacho, Willy
  • Pérez, Rubén
  • Vargas Guzmán, Horacio Andrés
Numerous respiratory viruses are transmitted via airborne microdroplets that frequently adhere to fomites. Understanding the behavior of these phenomenologically rich bio-material interfaces remains an open issue. Here, we tackle the complex interplay between glycans and protein conformational dynamics during adsorption onto polarizable surfaces, focusing on the potential of glycans as molecular interaction modulators. We employ molecular dynamics simulations to dissect the interactions of the Receptor Binding Domain (RBD) glycoproteins from different SARS-CoV-2 variants of concern (VoC), in both open and closed conformations, with polarizable planar interfaces. Advanced analysis using 2D space reveals distinct adsorption mechanisms depending on the initial loci of the glycan within the protein wall. Hydrophobic surfaces facilitate stable adsorption for both RBD conformations. Conversely, hydrophilic surfaces exhibit reduced adsorption, particularly for the closed-RBD, where glycans predominantly form hydrogen bonds. Glycans significantly modulate closed-RBD adsorption, either enhancing it by permanent tethering or impeding it depending on the initial conformation and protein mutations (Omicron). Results for the individual RBDs are consistent with scaled-up simulations for the complete spike ectodomain glycoprotein. Our findings unveil novel glycan-mediated adsorption phenomena and provide fundamental insights into glycoprotein-surface interactions, paving the way for understanding glycan roles in glycoprotein-fomite adsorption, protein aggregation, and recognition at polarizable biological interfaces., We thank Matej Kandučfor illuminating discussions on the molecular modeling of polarizable surfaces, Dr. Abigail Dommer for advice regarding the modeling of the whole spike trimer with glycans and for providing valuable comments on the first version of the manuscript. H.V.G. acknowledges financial support from the Ramón y Cajal grant No. RYC2022- 038082-I and the Spanish Ministry of Science and Innovation through project PID2023-150536NA-I00, as well as the “Severo Ochoa” Grant No. CEX2023-001263-S for Centers of Excellence, and CSIC’s grant MMT24-ICMAB-01 for the nanoML4Med project. H.V.G. also acknowledges the Red Española de Supercomputación (RES) for computing time and technical support at the Finisterrae III supercomputer projects FI-2025-2-0062 and FI-2025-2-0058. R.P. acknowledges support from the Spanish Ministry of Science and Innovation through project PID2023−149150OB-I00 and the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023−001316-M). A.M.B.-F. acknowledges support from the autonomous community of Madrid through the predoctoral research contract PIPF-2023/TEC-29920, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2Danalysis: A toolbox for analysis of lipid membranes and biopolymers in two-dimensional space

  • Ramirez, Ricardo X.
  • Bosch, Antonio M.
  • Pérez, Rubén
  • Guzman, Horacio V.
  • Monje, Viviana
Molecular simulations expand our ability to learn about the interplay of biomolecules. Biological membranes, composed of diverse lipids with varying physicochemical properties, are highly dynamic environments involved in cellular functions. Proteins, nucleic acids, glycans, and biocompatible polymers are the machinery of cellular processes both in the cytosol and at the lipid membrane interface. Lipid species directly modulate membrane properties, and affect the interaction and function of other biomolecules. Natural molecular diffusion results in changes of local lipid distribution, affecting the membrane properties. Projecting biophysical, structural membrane and biopolymer properties to a two-dimensional plane can be beneficial to quantify molecular signatures in a reduced dimensional space to identify relevant interactions at the interface of interest, i.e., the membrane surface or biopolymer-surface interface. Here, we present a toolbox designed to project membrane and biopolymer properties to a two-dimensional plane to characterize patterns of interaction and spatial correlations between lipid-lipid and lipid-biopolymer interfaces. The toolbox contains two hubs implemented using MDAKits architecture, one for membranes and one for biopolymers, that can be used independently or together. Three case studies demonstrate the versatility of the toolbox with detailed tutorials in GitHub. The toolbox and tutorials will be periodically updated with other functionalities and resolutions to expand our understanding of the structure-function relationship of biomolecules in two dimensions. Video Abstract: [Figure presented], R.X.R. and V.M acknowledge the computational resources available through the University at Buffalo Center for Computational Research (105) and the Anton2 machine, provided by Pittsburgh Supercomputing Center (PSC) through grant R01GM116961 from the National Institutes of Health, specific award MCB200093P. The Anton2 machine as PSC was generously made available by DE Shaw Research (20). H.V.G. acknowledges financial support from the Ramón y Cajal grant no. RYC2022-038082-I, and Spanish Ministry of Science and Innovation, through project PID2023-150536NA-I00 and the “Severo Ochoa” grant no. CEX2023-001263-S for Centers of Excellence, and thanks the Red Española de Supercomputación (RES) for the computing time and technical support at the Finisterrae III supercomputer project FI-2024-3-0033. R.P. acknowledges support from the Spanish Ministry of Science and Innovation, through project PID2023–149150OB-I00, and the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023–001316-M). A.M.B. acknowledges the financial support of Comunidad de Madrid through the predoctoral research contract PIPF-2023/TEC-29920. The authors thank Willy Menacho, Jinhui Li, and Oluwatoyin Campbell for testing the code before its release and feedback during the writing of this manuscript., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enabling the bulk photovoltaic effect in centrosymmetric materials through an external electric field

  • Inacio, Guilherme J.
  • Esteve-Paredes, Juan José
  • Martins Quintela, Maurício F. C.
  • Paz, Wendel S.
  • Palacios, Juan José
The data that support the findings of this article are not publicly available upon publication because it is not technically feasible and/or the cost of preparing, depositing, and hosting the data would be prohibitive within the terms of this research project. The data are available from the authors upon reasonable request., We develop a practical approach to electrically tuning the nonlinear photoresponse of two-dimensional semiconductors by explicitly incorporating a static out-of-plane electric field into the electronic ground state prior to optical excitation, as a gate bias. The method is implemented by dressing a Wannier-interpolated Hamiltonian with the field through its position matrix elements, which allows the gate bias to modify orbital hybridization and band dispersion beyond perturbative treatments. Within the independent-particle approximation, the resulting second-order (shift) conductivity is evaluated for both centrosymmetric and noncentrosymmetric layered systems. Applied to MoS2, the approach captures the emergence of a finite shift current in centrosymmetric bilayers and the tunability of intrinsic responses in polar structures. The shift conductivity rises linearly at small fields and saturates at higher intensities, reflecting the competition between the growing shift vector and the weakening interband coupling as resonant transitions move away from high-symmetry valleys. A Taylor expansion of the field-dressed conductivity connects this behavior to the third-order optical response, revealing a unified picture of field-induced nonlinearities. These results establish field dressing of Wannier Hamiltonians as a practical route to model and predict nonlinear photocurrents in layered materials., This work has been funded by the Spanish Ministry of Science, Innovation and Universities and the State Research Agency (MCIU/AEI/FEDER,UE) through Grants No. TED2021-131323BI00 and No. PID2022-141712NB-C21, the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M), the Comunidad de Madrid within the Recovery, Transformation and Resilience Plan, and by NextGenerationEU programme from the European Union through the project “Disruptive 2D materials” (MAD2D-CM-UAM7) and the Generalitat Valenciana through the Program Prometeo (2021/017). We also acknowledge computer resources and assistance provided by Centro de Computación Científica de la Universidad Autónoma de Madrid and RES resources (FI-2025-1-12, FI-2024-3-0010, FI-2024-2-0016, FI-2024-1-0038, FI-2023-3-0049, and FI-2023-2-0013). G.J.I. and W.S.P. acknowledge financial support from the Brazilian funding agencies FAPES (1044/2022, 1081/2022–P:2022-8L35F, and 875/2023–P:2023-V36VC) and CNPq (under Grants No. 444450/2024-6, No. 305227/2024-6, and No. 442781/2023-7)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Glass Stability on the Low Frequency Vibrations of Vapor Deposited Glasses

  • Festi, I.
  • Alfinelli, E.
  • Bessas, D.
  • Caporaletti, F.
  • Chumakov, A. I.
  • Moratalla, Manuel
  • Ramos, Miguel A.
  • Rodríguez-López, Marta
  • Rodríguez-Tinoco, Cristian
  • Rodríguez-Viejo, Javie
  • Baldi, G.
Ultrastable glasses prepared from the physical vapor deposition of organic molecules present a very low density of two-level states, the kind of glass defects that determine their peculiar low-temperature thermal properties. Numerical simulations suggest that quasilocalized harmonic vibrational modes emerge in the soft regions associated with two-level states. However, the connection between the low-frequency vibrational modes and the local structural instabilities of glasses remains unexplained. Here, we exploit a recently developed spectrograph for nuclear resonant analysis of inelastic x-ray scattering to probe the density of vibrational states of amorphous thin films of ultrastable and conventional glasses down to an exceptionally low frequency of approximately 70 GHz. We show that the glass stability does not affect the harmonic vibrational modes at the lowest frequencies, despite a reduction of almost an order of magnitude in the density of two-level states. At the same time, the vibrational modes at higher frequencies, around the boson peak maximum, are extremely sensitive to the glass stability. Although we cannot exclude the possible existence of quasilocalized modes in glasses, we show that their presence is not strictly necessary to describe the measured density of low-frequency vibrations. The experimental developments here presented pave the way to the solution to the long-standing debate on the low-frequency vibrations in glasses., We thank Mr. J.-P. Celse for providing technical assistance during the beam time at ID18 at the European Synchrotron Radiation Facility (ESRF). We acknowledge ESRF for provision of synchrotron radiation facilities under Proposals No. HC-4933 and No. HC-5322 at beam line ID18 (now ID14). F. C. acknowledges support from the Fund for Scientific Research (F.R.S.-FNRS). M. M. and M. A. R. acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033) through Grant No. PID2021-127498NB-I00, and within the “María de Maeztu” Program for Units of Excellence in R&D (CEX2023-001316-M). J. R.-V., C. R.-T., and M. R.-L. acknowledge Grants No. PID2020-117409RB-I00 and No. PID2023-147645NB-I00 from MICIU and No. 2021SGR-00644 funded by AGAUR. M. R.-L. was in receipt of a grant from AGAUR. The ICN2 is funded by the CERCA program/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence program, Grant No. CEX2021-001214-S, funded by Grant No. MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001316-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green Hydrogen Production via Water Splitting Using SrFe0.9Mo0.1O3−δ Perovskite as a Catalyst

  • Anemone, G.
  • Azcondo, M.T.
  • Muñóz-Noval, A.
  • Al Taleb, A.
  • Rubio-Zuazo, J.
  • Farías, D.
  • Amador, U.
Evidence of hydrogen production from water splitting using a nonstoichiometric cubic perovskite, SrFe (Formula presented.) Mo (Formula presented.) O (Formula presented.) (SFMO), as a catalyst under moderate operating condition is presented. It is demonstrated that the SFMO oxide, when reduced at 800 °C in air, can dissociate water to produce hydrogen and oxygen at the same temperature. The direct test of water dissociation with consequent hydrogen production is carried out using quadrupole mass spectrometry (QMS) under ultrahigh vacuum conditions, where the production of hydrogen by the material is unambiguously determined using heavy water. In addition, in operando synchrotron X-ray diffraction and X-ray absorption spectroscopy are employed to track structural and electronic changes during the reaction, revealing a reversible unit cell expansion without oxygen incorporation and indicating a nonredox mechanism distinct from that of conventional perovskites. This combined characterization approach enables correlation between gas-phase evolution and the structural and electronic response of the catalyst. The reaction cycle could be repeated several times without any decomposition, segregation, or irreversible structural changes, demonstrating the high stability of SFMO. These findings highlight SFMO as a robust and stable catalyst for sustainable hydrogen generation, with strong potential for integration into solar-driven water splitting technologies. © 2025 The Author(s). Small Structures published by Wiley-VCH GmbH., The authors thank “MCIN/AEI/10.13039/501100011033 and Fondo Europeo de Desarrollo Regional” (FEDER/UE “Una manera de hacer Europa”) for funding the project PID2022-139501OB-C21. The authors also thank BM5 Spline line and CSIC for allocating beamtime and facilitating the access to ESRF for XAS and SXRD experiments, through grants A25-2-1017, A25-2-1076, MA-4722, and IH-CH-1546. M.T.A. and U.A. also thank USP-CEU for financial support. This work has been partially supported by the Spanish Ministerio de Ciencia e Innovación under project PID2023-147466OB-C21. The COST Action CA21101 is also acknowledged. D.F. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Mara de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). AMN thanks the project PID2021-126323OA-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics and rupture of doped motility induced phase separation

  • Fernández-Quevedo García, Rodrigo
  • Chacón, E.
  • Tarazona, P.
  • Valeriani, Chantal
Adding a small amount of passive (Brownian) particles to a two-dimensional dense suspension of repulsive active Brownian particles does not affect the appearance of a motility-induced phase separation into a dense and a dilute phase, caused by the persistence of the active particles' direction of motion. Unlike a purely active suspension, the dense slab formed in an elongated system of a passive-active mixture may show, over long periods of time, a stable and well-defined propagation of the interfaces, because of the symmetry breaking caused by the depletion of passive particles on one side of the slab. We investigate these dynamical structures via average density profile calculations, revealing an asymmetry between the two interfaces, and enabling a kinetic analysis of the slab movement. The apparent movement of the dense slab is not a pure source/sink effect, nor a rigid displacement of all the particles, but a self-sustained combination of both effects. Furthermore, we analyse the specific fluctuations that produce, cancel and abruptly reverse the slab motion. © 2025 The Royal Society of Chemistry., We acknowledge the support from the Spanish Secretariat for Research, Development and Innovation (grants no. PID2020-117080RB-C52, PID2022-139776NB-C66, IHRC22/00002 and PID2022-140407NB-C21) and the Maria de Maeztu Programme for Units of Excellence in R&D (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rough Fabry–Perot cavity: a vastly multi-scale numerical problem

  • Slipchenko, Tetiana
  • Abad-Arredondo, J.
  • Consoli, A.
  • García Vidal, F.J.
  • Fernández-Domínguez, A.I.
  • García Fernández, Pedro David
  • López, Cefe
A commercial Fabry–Perot laser diode is characterized by highly disproportionate dimensions, which poses a significant numerical challenge, even for state-of-the-art tools. This challenge is exacerbated when one of the cavity mirrors is roughened, as is the case when fabricating random laser diodes. Such a system involves length scales from several hundred micrometres (length) to a few nanometres (roughness) all of which are relevant when studying optical properties in the visible. While involving an extreme range of dimensions, these cavities cannot be treated through statistical approaches such as those used with self-similar fractal structures known to show well-studied properties. Here we deploy numerical methods to compute cavity modes and show how random corrugations of the Fabry–Perot cavity wall affect statistical proper-ties of their spectral features. Our study constitutes a necessary first step in developing technologically essential devices for photonic computation and efficient speckle-free illumination. © 2025 the author(s), published by De Gruyter, Berlin/Boston., This work has received funding from MICIU Grants Ref. PID2021-124814NB-C21, PID2021-126964OB-I00, PID2021-127968NB-I00, and PDC2022-133418-I00. TS, AC, PDG, and CL acknowledge support from the Spanish MICIU Severo Ochoa program for Centres of Excellence through grant CEX2024-001445-S. JBA, FJGV and AIFD acknowledge funding from the María de Maeztu program for Units of Excellence in R&D through grant CEX2023-001316-M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coexistence of weak and strong coupling in a photonic molecule through dissipative coupling to a quantum dot

  • Lichtmannecker, Stefan
  • Echeverri-Arteaga, Santiago
  • Kaniber, Michael
  • Andrade Martelo, Isabel C.
  • Ruiz-Rivas, Joaquín
  • Reichert, Thorsten
  • Reithmaier, Günther
  • Ardelt, Per-Lennart
  • Bichler, Max
  • Zubizarreta Casalengua, Eduardo
  • Gómez, Edgar A.
  • Vinck-Posada, Herbert
  • Valle, Elena del
  • Müller, Kai
  • Laussy, Fabrice P.
  • Finley, Jonathan J.
We study the emission from a molecular photonic cavity formed by two proximal photonic crystal defect cavities containing a small number mathematical equation of In(Ga)As quantum dots. Under strong excitation, we observe photoluminescence from the bonding and antibonding modes in agreement with ab initio numerical simulations. Power dependent measurements, however, reveal an unexpected peak, emerging at an energy between the bonding and antibonding modes of the molecule. Temperature-dependent measurements indicate that this unexpected feature is photonic in origin. Time-resolved measurements show the emergent peak exhibits a lifetime τM = 0.75(10) ns, similar to both bonding and antibonding coupled modes. Comparisons of experimental results with quantum optical modeling suggest that this new feature arises from a coexistence of weak and strong coupling, due to the molecule emitting in an environment whose configuration permits or, on the contrary, impedes its strong coupling. This scenario is reproduced theoretically with a master equation reduced to the key ingredients of its dynamics and that roots the mechanism to a dissipative coupling between bare modes of the system. Excellent qualitative agreement is obtained between experiment and theory, showing how solid-state cavity QED can reveal intriguing new regimes of light–matter interaction., Financial support is acknowledged from the German Science Foundation (DFG) via the German excellence initiative within the Munich Center for Quantum Science and Technology (MCQST – EXS 2111) and e-conversion (EXS 2089) and SPP 2244, the BMBF via Projects No. 16KIS0874 and 16KIS0948. FPL acknowledges support from HORIZON EIC-2022PATHFINDERCHALLENGES-01 HEISINGBERG Project 101114978 and the Spanish Ministry of Science, Innovation and Universities through the project PID2023-150420NB-C32 (R). EdV acknowledges support from the CAM Pricit Plan (Ayudas de Excelencia del Profesorado Universitario), the Technical University of Munich Institute for Advanced Study (Hans Fischer Fellowship) and the Spanish Ministry of Science, Innovation and Universities through the “Maria de Maetzu” Programme for Units of Excellence in R & D (CEX2023-001316-M), the MCIN/AEI/10.13039/501100011033, FEDER UE, projects No. PID2020-113415RB-C22 (2DEnLight) and No. PID2023-150420NB-C31 (Q), and from the Proyecto Sinérgico CAM 2020 Y2020/TCS-6545 (NanoQuCo CM). HV-P and EAG thank the financial support from the project “Ampliación del uso de la mecánica cuántica desde el punto de vista experimental y su relación con la teoría, generando desarrollos en tecnologías cuánticas útiles para metrología y computación cuántica a nivel nacional”, BPIN 2022000100133, funded by SGR of MINCIENCIAS; Gobierno de Colombia. EAG acknowledges financial support from Universidad del Quindío under project No. 1141., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlations in circular quantum cascades

  • Palomo Marcos, Miguel Ángel
  • Zubizarreta Casalengua, Eduardo
  • Valle, Elena del
  • Laussy, Fabrice P.
14 pages, 5 figures, submitted to Phys. Rev. A. Added discussion on time crystals and details on the structure of each peak, We introduce a one-way, one-quantum cascade, whereby a single excitation proceeds one-direction-wise in a ladder of energy levels. This makes a variation from more famous two-way cascades where the excitation can go up and down following its excitation or relaxation in the ladder. We provide closed-form solutions for two-photon correlation functions between any transitions in such circular cascades. We discuss how the rich correlations that result from what appears to be an extremely simple implementation are essentially those which have been obtained from complex architectures relying on strongly correlated, many-body physics or cavity QED effects, and might constitute the liquid phase of the new family of time materials., E.d.V. acknowledges support from the TUM-IAS Hans Fischer Fellowship, the CAM Pricit Plan (Ayudas de Excelencia del Profesorado Universitario), Sinérgico CAM Project No. Y2020/TCS-6545 (NanoQuCo-CM), and the Spanish Ministry of Science, Innovation and Universities under Grant No. AEI/10.13039/501100011033 (2DEnLight) and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). F.P.L. acknowledges support from the HORIZON EIC-2022-PATHFINDERCHALLENGES-01 HEISINGBERG Project No. 101114978., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing covalent organic frameworks for organic catalysis: bridging reticular and molecular chemistry

  • Shirani, Mohammad Ali
  • Afshari, Mohaddeseh
  • Romero-Muñiz, Ignacio
  • Platero Prats, Ana Eva
  • Dinari, Mohammad
  • Zamora, Félix
Covalent organic frameworks (COFs) have gained significant attention over the past decade as heterogeneous catalysts for a wide range of applications. Among the most prominent is organic synthesis, a key area in disciplines such as medicinal chemistry, materials science, and designing molecules with optoelectronic properties. In this review, we provide an overview of the fundamental advances in the synthetic design of COFs, specifically focusing on strategies to enhance their catalytic activity for organic transformations. The discussion is organized around four key areas: catalysis driven by the material's backbone, ligand design for organocatalysis, support for metals, and the hosting of nanostructures such as nanoparticles or enzymes., M. A. S., M. A. and M. D., gratefully acknowledge the Iranian National Science Foundation (INSF) for their financial (Grant No. 4026090) support and the Research Affairs Division of the Isfahan University of Technology (IUT), for partial financial support. I. R.-M. and F. Z., acknowledge financial support from the Comunidad de Madrid and the Spanish State through the Recovery, Transformation and Resilience Plan [“Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM) (UAM2)-MRR Materiales Avanzados], and the European Union through the Next Generation EU funds. F. Z. acknowledges the grants PDC2022-133498-I00, TED2021-129886B-C42, and PID2022-138908NB-C31. F. Z. also acknowledges support from the European Innovation Council under grant agreement 101047081 (EVA). A. E. P.-P. acknowledges the grants PID2021-123839OB-I00, RYC2018-024328-I, and CNS2022-135261 funded by MICIU/AEI/10.13039/501100011033. F. Z. and A. E. P.-P. acknowledge support from the Spanish Ministry of Science, Innovation and Universities through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316 M). I. R.-M. also acknowledges Juan de la Cierva programme JDC2023-051645-I, funded by MCIU/AEI/10.13039/501100011033 and by the FSE+., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316 M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic Doping of Nickelates with Lithium Reveals a Widely Tunable Insulator–Metal Transition with Charge Filling and Band Renormalization Regimes

  • Zhang, Alan C.
  • Álvarez-Chico, Alejandro
  • Salagre, Elena
  • Gonzalez, Martín
  • Spataru, Catalin D.
  • Sugar, Joshua D.
  • Gross, Adam L.
  • González-Barrio, M. A.
  • Segovia, P.
  • Tallarida, Massimo
  • Dai, Ji
  • Kumar, Suhas
  • Talin, A. Alec
  • Hwang, Harold Y.
  • Michel, Enrique G.
  • Mascaraque, Arantzazu
  • Fuller, Elliot J.
The insertion of electron-donating ions has emerged as a powerful technique to manipulate the electronic structure of correlated oxides. However, the resulting electronic structure remains poorly understood, with challenges in quantifying dopant concentration, unexplained differences with substitutionally doped films, and a poor understanding of how dopant atoms interact with insulator–metal transitions (IMTs). Here, these issues are addressed in the context of the rare earth nickelates, a prototypical correlated oxide family with widely tunable electronic behavior under the insertion of protons and alkali metals as interstitial dopants. RNiO3 (R = Pr, Nd) epitaxial thin films are synthesized, lithium dopants are introduced and quantified using electrochemical and synchrotron-based techniques, and the resulting electronic structure is studied. From electronic transport measurements of LixLiRNiO3, lithium is found to affect the metal–insulator transition, causing more than an order of magnitude reduction in ground-state resistivity at fractions xLi < 0.18, a systematic lowering of transition temperature, and successively smaller ON/OFF ratios over 0.00 < xLi < 0.25. At larger fractions xLi > 0.25, the transition is destroyed, and insulating behavior is observed over T = 5–300 K. Angle-resolved photoemission (ARPES) confirms transport results and reveals band renormalization occurring over 0.10 < xLi ≤ 0.71. ARPES and X-ray absorption spectroscopy (XAS) combined with density functional theory indicate that rigid band filling models are generally insufficient to explain doping from lithium, especially at low temperatures, but could approximate room temperature effects in the low doping regime (xLi < 0.10). Broadly, the results indicate that interstitial dopants lead to complex interactions with metal–insulator transitions and the emergence of an exciting family of correlated electronic phases., Introduction The insertion of ions or molecules as dopants into correlated electron systems has a rich history, especially in the case of 2D materials, where electron-donating ions provide a far greater effective doping concentration relative to gating by electric fields or electric double layers. For example, as early as 1970, it was discovered that the superconducting transition in TaS2 could be tuned through an intercalated layer of pyridine (1) or alkali metals. (2) More recently, a rich field of new correlated phases has emerged from 2D van der Waals materials. (2−5) This includes the extraordinary ability to tune between Bardeen–Cooper–Schrieffer superfluidity and a Bose–Einstein-like superconducting condensate in the 2D superconducting system ZrNCl through the intercalation of lithium. (6) On the other hand, correlated oxide systems have also been explored as ion-insertion hosts, with early work from 1950 to 1980 on tungsten bronzes (7−9) and later work on the rare earth nickelates, (10−14) cuprates, (15) and vanadium oxides. (16) In such systems, a similarly rich landscape of new correlated phases now seems possible. However, oxides lack the weak van der Waals layers between which to insert ions, and doping at interstitial sites has generally been more challenging. For example, the metastable nature of the resulting material coupled with sluggish diffusion kinetics has confined many works to thin-film approaches (as opposed to high-temperature bulk synthesis) in which the species can be introduced across short diffusion lengths but are then limited to thin-film experimental probes. In this case, bulk techniques such as thermogravimetric analysis to quantify dopants or neutron scattering to provide precise structural information are not typically possible. Therefore, new techniques and methodologies by which to synthesize and characterize oxide systems under interstitial doping should enable new discoveries in this fascinating class of emerging materials. In this work, these issues are addressed to reveal the electronic structure at quantified doping concentrations for the rare earth nickelate systems PrNiO3 and NdNiO3. The nickelates are negative charge-transfer insulators, with the chemical formula RNiO3, where R is a trivalent rare-earth (R = La, Nd, Pr, ... etc.), and the interplay between charge and lattice degrees of freedom leads to a bond-disproportionated insulating state at low temperature with a transition to a metal state at elevated temperature. (17) Recently, the insertion of protons or alkali metals has yielded interesting results, such as colossal changes in the room temperature resistivity by up to a factor of 108 and applications in computing devices. (11,18) Nevertheless, the electronic structure of these systems continues to elicit controversy. First, there are substantial differences with substitutionally doped films, which have not clearly been explained. (17,19,20) Second, the number of dopants is often not reported or unknown, making phase diagrams difficult to construct. And third, proposed models can be simplistic (i.e., rigid band filling) and consider only the room temperature behavior without interactions with the transition. (14) On one hand, if there are indeed regimes where rigid band filling is a good approximation, interstitial doping could become a powerful technique to probe the intrinsic electronic structure of nickelates and other oxides. On the other hand, any new electronic phases emerging from interstitial dopants with significant changes to the electronic structure (or interactions with transitions) may be interesting phases in their own right. In this work, quantitative electrochemical cells are constructed to determine dopant concentrations, and cryogenic transport measurements are used to construct phase diagrams across the full temperature range to include the bond-disproportionation transition. To more clearly reveal the resulting electronic structure evolution, including charge filling and band renormalization regimes, synchrotron-compatible doping techniques in situ with angle-resolved photoemission (ARPES) are carried out. In each case, the methodology presented allows the study of the same sample under a continuous doping evolution, within a simple experimental setup, and without the issue of sample-to-sample variability. Results and Discussion PrNiO3 is synthesized as epitaxial thin films, and electrochemical cells are constructed in order to dope them with lithium, quantify the number of lithium dopants introduced, and characterize the resulting effects via electronic transport measurements. Briefly, films with thicknesses ranging from 5 to 100 nm are synthesized using pulsed laser deposition (PLD) on (LaAlO3)0.3(Sr2TaAlO6)0.7 (LSAT) single-crystal substrates. As depicted in the schematic in Figure 1b, the electrochemical cells are constructed by patterning the films into well-defined channels of various sizes (typically 3 mm × 100 μm) using optical lithography and etching unused regions with nitric acid. Electrode contacts (4-wire configuration) are patterned on the film with 50 nm of gold, and LiFePO4 is drop-cast onto a gold current collector to act as a counter electrode (source of lithium). A polydimethylsiloxane (PDMS) well is used to contain electrolyte consisting of either 1 M LiClO4 in propylene carbonate or ionic liquid 1 M LiFSI in PYR-14 TFSI. All electrochemical cycling is either done in vacuum or in an inert argon environment with <5 PPM H2O and O2, and the films are characterized in a vacuum cryostat. More details of the synthesis, fabrication, and electrochemical processes can be found in the Methods/Experimental Section. Figure 1 Figure 1. Electrochemical cycling and transport measurements of LixLiPrNiO3. (a) A schematic of the bond disproportionation transition in PrNiO3 (top panel) and the same transition with lithium interstitial defects (bottom panel). The transition is viewed in the a–b plane, with oxygen octahedra (gray) surrounding Ni sites (dark blue) and lithium ions inserted through a charge transfer reaction (green). (b) A schematic of electrochemical cycling with a thin-film LixLiPrNiO3 working electrode (brown), a LiClO4 electrolyte (blue), a LiFePO4 counter electrode (brown), gold current collectors and electrodes (yellow), and a single-crystal LSAT substrate (tan). (c) Consecutive charge–discharge curves of the working electrode potential EWE (LixLiPrNiO3) vs LiFePO4 (top panel) and corresponding change in the LixLiPrNiO3 resistance ratio (bottom panel). The areas shaded light blue (light red) correspond to lithium insertion into (out of) LixLiPrNiO3. (d) Resistivity plotted against temperature for doping fractions xLi = 0.0–0.27. (e) Resistance ratio at T = 5 K for doping fractions xLi = 0.00–0.27. (f) Activation energy Ea extracted from transport curves at temperatures below the transition. (g) The transition temperature Tc as a function of lithium doping. The films are electrochemically cycled at constant current (chronopotentiometry), and the resistance is monitored simultaneously using a Biologic SP-300 bipotentiostat. A LiFePO4 counter electrode is used to drive Li+ ions through the electrolyte into the LixLiPrNiO3 working electrode. LiFePO4 is chosen because it is a stable, phase-coexistence source of lithium with a flat electrochemical voltage profile, and it more easily provides a quantitative electrochemical probe at lower voltages than pure lithium. (21) At low voltage, side reactions can be reduced, enabling the quantification of electrochemical charge transfer. Figure 1c shows an example of a cycling curve for a 90 nm thick film. At a charging rate of C/8, where C is the amount of charge needed to reach xLi = 1.00 in 1 h, an increase in the working electrode potential EWE to approximately 1 V is observed in the first few minutes (Figure 1c, top panel, blue shaded regions). Next, a shallow but steady increase in EWE to roughly 1.4 V is observed and accompanied by a monotonic but nonlinear increase in the resistance by a factor of roughly 4.5 after 1 h of charging (Figure 1c, bottom panel, blue shaded regions). The large swing in EWE within the first few minutes of charging is ascribed to overpotential, which is related to voltage buildup at the electrolyte–electrode interface due to charge-transfer resistance. The subsequent gradual increase in EWE (to 1.4 V) is ascribed to the lithium insertion process, in which a steady increasing potential suggests a solid solution of LixLiPrNiO3. A subsequent discharge at C/8 returns the resistance to the initial value, although over a shorter duration and a smaller total charge. The discharge process allows for a calculation of the Coulombic efficiency of the cell. Here, the reversible amount of charge is ascribed to the lithium insertion process and the irreversible charge to side reactions. The Coulombic efficiency is then used to calculate the lithium fraction xLi in LixLiPrNiO3 during further cycling and transport measurements. The insertion of lithium into the bulk of RNiO3 through Faradaic electrochemical reactions has been reported elsewhere (13,14,22) and is distinct from ionic liquid gating, which primarily acts as a field effect based upon electric double layers. Cryogenic electronic transport curves are measured as a function of xLi for a 33 nm thick film and are plotted in Figure 1d. In the pristine film (red), intrinsic transport behavior is observed with metallic conduction down to 122 K, followed by a sharp insulator–metal transition with a roughly 1 × 105 ON/OFF ratio and divergent resistivity below 20 K. This is consistent with previous reports of high-quality nickelate films. Next, at doping xLi = 0.16 (dark orange), a sharp drop in the ground-state resistance by more than 1 order of magnitude is observed, accompanied by an increase in the room temperature resistance by a factor of 4.2. The transition temperature, which is defined as the inflection point where the slope switches from negative to positive, is decreased by about 12 K (Figure 1g). This behavior is qualitatively similar to substitutional electron doping at the rare earth site in Nd1–xCeCexCeNiO3, (20) where small fractions xCe of Ce have the same effect, albeit over a much different range in dopant concentration (xCe < 0.01). However, at larger concentrations, lithium doping qualitatively diverges from substitutional doping. First, the trend in the low-temperature resistance reverses (Figure 1e), and a monotonic increase is observed for all doping fractions, with successive suppression of the transition and a smaller ON/OFF resistance ratio. Second, the activated transport gap Ea, which is extracted from the slope in the insulating regime and plotted in Figure 1f, lowers to a minimum but then increases for xLi > 0.24. In contrast, substitutional doping has the effect of completely destroying the bond disproportionation transition and inducing metallic behavior at all fractions xCe > 0.05. Finally, it is observed that between xLi = 0.24 and 0.26, the bond disproportionation is destroyed (Figure 1d, purple and brown curves), giving rise to fully insulating behavior. It is noted that previous reports on proton doping have shown qualitatively similar behavior (e.g., with the xLi = 0.16 transition), although with unknown dopant fractions, (12) suggesting proton-doped films may have similar behavior as lithium-doped films. It is useful to construct and analyze phase diagrams from the transport data of LixLiPrNiO3. These diagrams can provide identification of new correlated phases emerging from the complex interaction of lithium with the lattice. In Figure 2a, we plot the derivative d(ln ρ)/dT (color scale) as a function of doping (vertical axis) and temperature (horizontal axis) to identify the critical regions. We define insulating and metallic regions by negative and positive values of d(ln ρ)/dT, respectively. First, we note the large blue region from about 130 K to 300 K and from xLi = 0.0 to 0.24, corresponding to metallic behavior. Next, the red and yellow regions indicate sharper points in the transition at low doping fractions. Finally, a crossover to fully insulating behavior xLi > 0.24 is noted, where the transition is completely suppressed. While the primary focus in this report is on films which exhibit intrinsic transport properties, often the materials reported in the literature are polycrystalline and defective and exhibit much smaller ON/OFF ratios. This is especially problematic for perovskite nickelates due to the thermodynamic preference for Ni2+ valence states and resulting secondary phases such as Ruddlesden–Popper (RP)-type faults. (23) Therefore, an additional phase diagram is presented in Figure 2b, where the Ni/R ratio had not been optimized in synthesis (Ni/R < 1.0). Here, the xLi = 0.00 ON/OFF ratio is only about 1 order of magnitude (as often reported for polycrystalline films), and a much smaller range in slope is observed over the entire phase diagram. Interestingly, the transition can still be tuned between xLi = 0.00 and 0.08, albeit with much smaller fractions of lithium required to disrupt the metal–insulator transition. In striking contrast to the intrinsic case, the film becomes metallic at all temperatures for fractions 0.08 < xLi < 0.16, although with higher total resistance. Therefore, it is concluded that RP stacking faults have the effect of stabilizing a metallic phase under lithium doping. Figure 2 Figure 2. Phase diagrams of LixLiPrNiO3. (a) Phase diagram of a LixLiPrNiO3 film is generated from the slope d(ln ρ)/dT from the transport curves in Figure 1d. The white-to-blue portion of the color scale represents a positive slope, whereas green-to-red represents a negative slope. (b) Phase diagram of LixLiPrNiO3 with Ruddlesden–Popper stacking faults. The color scale delineates negative and positive slopes as with (a), but the overall slope magnitudes are significantly shallower. ARPES is carried out in situ with lithium doping to measure the resulting band structure. While electronic transport measurements combined with electrochemical cycling can provide quantitative information about metallic and insulating phases at specific doping fractions, ARPES offers direct insight into the evolution of the electronic structure. Briefly, samples are prepared by oxygen plasma etching in an ultrahigh vacuum environment. X-ray photoemission spectroscopy (XPS) is performed to verify the lack of carbon contamination at the surface and to determine lithium fractions. The quality of the surface after cleaning is checked with low-energy electron diffraction (see Supporting Information Figure S16). Lithium doping at various fractions is studied across a single sample by a succession of depositions with a commercial lithium getter from SAES. Deposition steps range between 1 and 90 min, in which a pressure better than 5 × 10–10 mbar is maintained. The lithium content for each doping fraction is then calculated based upon a quartz balance calibration and the measurement of the Li 1s, O 2s, Nd 5p, and Nd 5s core-level intensity. A detailed discussion on the lithium doping process can be found in Supporting Information Figures S8–S11. Measurements of both PrNiO3 and NdNiO3 were performed with qualitatively similar results. The NdNiO3 yielded a higher quality surface with clearer bands, and therefore, we primarily report on NdNiO3 given the similarity in electronic structure and transition temperatures to PrNiO3 (see Supporting Information Figure S12). First, qualitative changes to the valence band from ARPES are described for a single 5.5 nm thick NdNiO3 film after successive lithium evaporation steps. Figures 3a and 3b show the normal emission, long-range valence band as a function of lithium content for hv = 80 eV (Γ point) and for hv = 110 eV (Z point), respectively. Peak B (Fermi edge) originates from Ni 3d eg orbitals, while peak B′ at −1 eV is associated with Ni 3d t2g orbitals. Peak B″, located at a −2.3 eV binding energy, corresponds to a hybridized state involving Ni t2g orbitals and O p-orbitals. In the right insets, the pristine state (red) shows a metallic Fermi edge. With increasing lithium content from xLi = 0.10 to 0.24 (orange to light blue), the Fermi edge decreases, indicating more insulating behavior with spectral weight shifted lower in BE. A larger difference compared with pristine is observed at xLi = 0.71 (dark blue), with a total collapse of the signal near the Fermi level, complete insulating character following this collapse, and significant renormalization of all Ni 3d states. While spectra with lithium content xLi = 0.10–0.24 do not have such a drastic change as xLi = 0.71, closer inspection of the valence band shape and spectral distribution indicates significant renormalization effects. First, deeper levels (observed in the left panels in Figure 3a,b) exhibit a systematic increase in spectral weight at the expense of states closer to the Fermi level. For example, spectral features labeled A and A′ grow in intensity, whereas spectral features labeled B and B′ are found to decrease. These changes are photon-energy-dependent and are observed for both 80 and 110 eV, which indicates that such features are not simply related to surface effects or changes to sample quality. Furthermore, the intensity distribution of the shallow peaks B, B′, and B″ is modified by lithiation as the intensity at the Fermi energy (B) collapses. Figure 3 Figure 3. LixLiNdNiO3 valence band spectra as a function of lithium content and temperature. Panels (a) and (b) are the integrated long-range valence band for different lithium contents (pristine, xLi = 0.1, 0.19, 0.24, and 0.71) taken around 200 K. The photon energy for (a) and (b) is 80 and 110 eV, respectively. Insets on the right for each photon energy are taken near the Fermi level. Panels (c) to (g) are the evolution at each lithium content measured during cooling at temperatures between 20 and 240 K. The temperature scale is indicated by color and vertical displacement of the lines according to the legend (right). The state of the sample in each case is identified by the color bars at the right of each graph, with metallic (red, M), insulating (blue, I) and transition regions (yellow, T). To investigate how the bands change during the metal–insulator transition, the valence band was measured as a function of the temperature. Figure 3c–g shows the valence band spectra for xLi = 0.00–0.71. The spectra are obtained by integrating the acceptance angle (ky = ± 1.15 Å–1) at fixed kx in order to capture changes to both electron and hole pockets. The temperature range of metallic and insulating states and transitions is obtained from the intensity at BE = 0.0 and 0.2 eV, as shown in Supporting Information Figure S14. For the pristine state in Figure 3c, the flattening of the Fermi edge observed between 140 and 160 K is labeled T1, and this is ascribed to the metal–insulator transition in NdNiO3. An additional transition, labeled T2, is found between 40 and 60 K and marked by differences in slope, which is ascribed to the antiferromagnetic insulating transition. The two transitions occur simultaneously in bulk NdNiO3 but appear at different temperatures in the thin film, likely due to epitaxial strain. (17) Next, at xLi = 0.06 (Figure 3d), the intensity at the Fermi edge decreases in the metallic phase, and the metal–insulator transition is lowered to between 110 and 130 K. Interestingly, the T2 transition temperature is raised to between 50 and 70 K compared with pristine. For xLi = 0.10 and 0.19, the metal–insulator transition T1 is lowered further in temperature to between 100 and 120 K with no additional transition T2 observed, potentially indicating that these transitions are now simultaneous. It is noted that the qualitative trend of lowering the T1 transition agrees well with transport data for electrochemically doped PrNiO3 films (Figure 1d), but with systematically lower temperatures for all doping fractions, consistent with differences between PrNiO3 and NdNiO3. A more detailed analysis of the band structure is carried out with constant energy surfaces. The Fermi surface of pristine NdNiO3 is plotted in Figure 4a at around 200 K (metallic state) and presents an electron pocket at the Γ points and hole pockets centered at A points. (24) Figure 4a–f shows cuts through the Fermi surface (intensity distribution at the Fermi energy) near the bulk Γ point (hv = 80 eV) for increasing lithium content (the results for hv = 110 eV can be found in Supporting Information Figure S13). All surfaces have been measured at a temperature between 200 and 250 K except for panel (f) with xLi = 0.71, which was insulating for all temperatures, and a completely unoccupied surface at 12 K is shown as an example. The dashed white lines correspond to the Brillouin zone edges, and the blue and red lines indicate the electron and hole sheets, respectively. In the series, up to xLi = 0.19, the central electron pocket and hole pockets are conserved. There is also a decrease in the feature contrast, as expected from the decrease in slope at the Fermi level seen in the integrated VB spectra in Figure 3. Figure 4a–e shows partial degradation of the quality in the Fermi surface with increasing lithium content, which is partly attributed to the small probing depth of ARPES at the photon energies used and the possibility of some surface lithium terminating the NdNiO3 film. Figure 4 Figure 4. Fermi surfaces and cuts for LixLiNdNiO3. Panels (a) to (f) show constant energy cuts at the Fermi level for each lithium fraction indicated by a label and color-coded dot in the lower right corner of each graph. In panel (a), red (holes) and blue (electrons) lines are intended to be a help to the eye in identifying the bands. Panel (g) corresponds to MDC cuts at the green and yellow dotted lines of panel (a) in order to quantify the size of the surfaces for each different lithium fraction. The results and therefore evolution of the Fermi surface size are plotted in panel (h) for 80 eV photon energy and 110 eV photon energy for both hole (red) and electron bands (blue). To quantify the effects of lithium near the Fermi level, an analysis of momentum distribution curves (MDCs) is carried out. The MDCs are plotted in Figure 4g and correspond to cuts at the horizontal yellow and green dashed lines in Figure 4a, which are the electron and hole pockets, respectively. In Figure 4g, the distance between the two peaks reflects the size of the electron and hole pockets, which are found to increase with the lithium content. The peak distance is plotted in Figure 4h, where both a small increase in the distance between the adjacent hole pockets and an increase in the electron pocket diameter are quantified. Both trends indicate an increase in electron content, consistent with lithium donating an electron to the lattice. The band filling due to lithium insertion is obtained from absolute electron doping, which is calculated from a Luttinger analysis of the volume of the Fermi surface. For a small range, the effect of electron doping could be approximated by band filling. The first lithium doping step, xLi = 0.01, has a corresponding band filling increase of 0.013, and xLi = 0.06 has an increase of 0.071. The evolution of electron filling was also tracked via X-ray absorption spectroscopy at the O K-edge (see Figure S15). A clear decrease in the prepeak intensity with increasing lithium content indicates a progressive weakening of Ni–O hybridization. This prepeak, associated with transitions from O 1s core levels to hybridized Ni 3d–O 2p states, reflects the degree of orbital mixing between nickel and oxygen. Consequently, the reduction in prepeak intensity implies a lower degree of hybridization and a corresponding decrease in the Ni valence. This behavior is consistent with electron doping driven by lithium incorporation, which donates electrons to the system and stabilizes nickel in a more reduced oxidation state and is reflected also in the intensity change of peak B″. (25) At more incorporation steps, the lithium content and band filling values start to diverge further. For xLi = 0.10, the corresponding filling increase is 0.17, which indicates a strong deviation from pure electron filling behavior. This conclusion is supported by the analysis of binding energy vs momentum plots (see Supporting Information, Figure S17), which show that lithium induces a change in the band curvature (i.e., a modification of the effective mass). Ground-state density functional theory (DFT) calculations were carried out to compare with transport measurements in the low-temperature limit. The electronic properties of LixPrNiO3 are calculated using density functional theory (DFT) within the GGA + U approach with U = 2.0 eV for Ni d-states. The calculations are carried out using the VASP code (26) in conjunction with PAW pseudopotentials. (27) Complex S-type antiferromagnetic ordering for the higher-spin Ni ions (28) was assumed, and supercells containing 32 PrNiO3 formula units were considered. Figure 5a (top) shows a schematic of the transition showing the long and short disproportionated NiO6 labeled as NiL and NiS, respectively. The Ni–O bond lengths are 1.89 Å for NiS and 1.95 Å for NiL. The Ni ions are low-spin (0 magnetic moment) for NiS and higher-spin (magnetic moment = 1.15 μB) for NiL, indicative of valence states of +4 and +2, respectively. Lithium atoms were inserted randomly into low-energy intercalation sites. Figure 5a (bottom) shows a lithium intercalation site, with the shortest Li–Ni bond (length = 2.15 Å) taking place between Li and NiS. The initial calculation of the pristine ground state (Figure 5b) shows a bandgap of 460 meV that agrees well with the literature (21) and with the value from transport data of 445 meV in Figure 1f. From DFT, it is found that small fractions of doping xLi = 0.03 are enough to disrupt bond disproportionation (Figure 5c) with a strong reduction in the Eg (Figure 5g). At subsequently larger doping fractions xLi > 0.06, the bandgap opens up again, returning to more insulating behavior, presumably due to Coulomb repulsion due to electron filling, as was proposed previously. (13) We note that the overall trend is precisely what is observed in transport in Figure 1f, with a reduction in the gap, followed by an increase. It is noted, though, that the fractions required to achieve this trend are shifted lower from the experiment, with an increase in gap occurring at smaller lithium fractions. However, the overall trend is captured qualitatively. This might partially be related to the Li intercalation contrasted with effective filling observed in the photoemission measurements. We find that with increasing lithium content, the oxygen octahedra are distorted and bond disproportionation is gradually reduced, while the magnetic moments gradually increase/decrease on the NiS/NiL ions closest to lithium (with magnetic moments of about 0.8 μB for xLi = 0.25), suggesting a gradual change in valency from +4/+2 to +3. The overall decrease in bond disproportionation is also reflected in the reduced difference between NiS and NiL PDOS (Figure 5b–f). We note that at large lithium contents, the insulating behavior captured by DFT agrees with transport and photoemission measurements. This suggests that, even though the DFT calculations target the low-temperature limit, the calculated electronic structure for the highest considered lithium content (e.g. xLi = 0.25) may be partially representative (given the reduced bond disproportionation) for the high-temperature case as well and, in particular, for high enough lithium content where the phase transition is suppressed. Figure 5 Figure 5. Density functional theory calculations of LixLiPrNiO3. (a) Diagram showing long and short disproportionated NiO6 labeled as NiL and NiS, respectively (top). The same diagram is shown for a lithium interstitial defect (bottom). The density of states for xLi = 0.00 (b), xLi = 0.03 (c), xLi = 0.06 (d), xLi = 0.13 (e), and x = 0.25 (f) with contributions from NiL and NiS plotted in blue and red, respectively. (g) The calculated band gap Eg as a function of the fraction xLi in LixLiPrNiO3. Conclusions The effect of interstitial lithium for PrNiO3 and NiNiO3 significantly deviates from both substitutional dopant counterparts (such as Th or Ce (19)), as well as from a pure electron filling model (i.e., rigid band filling models (14)), which does not take into account complex interstitial defect interactions. From transport measurements, ARPES, and DFT, an intriguing picture of interstitial lithium doping emerges, where a strong interruption of the bond disproportionation transition occurs at low temperatures even with small doping fractions x < 0.16, and where more than an order of magnitude reduction in ground-state resistance occurs. At room temperature and at low doping fractions x < 0.10, a rigid band filling model may be a reasonable approximation. However, as doping exceeds x > 0.1, clear renormalization effects are apparent from the resulting changes in spectral weight near the Fermi level and changes to band curvature. Such renormalization does not lead to complete metallization as with substitutional dopants, likely due to the lack of strong steric effects on the Ni–O bond angle as reported by Munoz et al., (19) although structural distortions from the interstitial site occupancy clearly play a role. Next, a discussion of the results in the context of other oxides and interstitial atoms is presented. First, smaller-radius interstitial proton defects or larger-radius alkali metal atoms may exhibit significant similarities. For example, despite their small ionic radius, protons were found to increase the cell volume by as much as 13% at doping fractions approaching x = 1.0, (29) indicating significant structural distortion similar to lithium, and therefore, renormalization effects are likely to play a role. As the ionic radius grows larger with different alkali metals, these distortion effects may increase relative to lithium, potentially leading to phase segregation effects or large structural transformations as observed with intercalated 2D materials. (4) Finally, the methods described in this study can be extended to other oxide systems more generally, either to probe their intrinsic electronic structure (at low fractions) or to create new correlated phases of matter, where interstitial defects interact with correlated transitions. As this study demonstrates, with careful consideration of electrochemistry, interstitial defect densities can be quantified and controlled via quantitative means to precisely map phase diagrams. Further, the in situ doping methods presented allow the band structure to be revealed and at quantified dopant concentrations. Therefore, we anticipate interstitial doping to be of broad interest: first, it is less explored than substitutional doping and may provide a more intrinsic probe of electronic structure at small concentrations and with smaller ionic radii (such as Li, H). Finally, we anticipate the discovery of an exciting new family of correlated phases to emerge more generally in other oxide systems and across a variety of dopant atoms (i.e., H, K, Na, etc.). Methods/Experimental Section Pulsed Laser Deposition PrNiO3 thin films were grown on LSAT (001) substrates by using a Neocera PLD system. The LSAT substrate was chosen because of the small in-plane lattice mismatch; it imposes 1.2% tensile strain on PrNiO3. The stoichiometric and Ni-enriched polycrystalline targets were ablated using a 266 nm Nd:YAG laser operating at 5 Hz. The laser fluence was 3.4 J/cm2 with a spot size of 1.7 mm2. The low-energy outer edge of the laser beam was truncated by imaging through a circular aperture to achieve a more uniform laser spot. The stoichiometric target was purchased from Toshima Manufacturing Co., and the Ni-enriched target was made by sintering a pelletized Pr2O3 and NiO powder mixture with a composition of PrNi1.2O3; the target was sintered in air at 1200 °C for 12 h 4 times with intermediate grinding in between. A combinatorial method was used for synthesis by varying the duty cycling between the two targets with each full cycle totaling 40 shots. The growth substrate temperature was 570 °C in 200 mTorr partial pressure of O2. The films were cooled at 5 °C/min in a 2.5 Torr O2 atmosphere. NdNiO3 thin films were grown on a LSAT (001) by PLD with a 248 nm KrF excimer laser and a polycrystalline NdNiO3 target. The LSAT substrate was prepared ex situ by standard acetone–isopropyl alcohol ultrasonication. Laser fluence was set to 2.6 J/cm2, with a laser spot of 0.77 mm2. Substrate temperature during growth was 580 °C, and partial O2 pressure was set to 150 mTorr. A 30 min postanneal in a partial oxygen atmosphere of 5 × 10–6 Torr at 900 °C was done after growth. Electrical Transport Measurements Electrical transport measurements were performed in the linear Kelvin probe configuration with sputtered Cr/Au electrodes in a Lakeshore ST-500. A Keithley 6221 current source provided a constant DC current, and a Keithley 2182A nanovoltmeter measured the voltage difference across the inner electrodes. Data were recorded using the NHMFL Data Acquisition System v.2.4.1. Electrochemical Cycling The PrNiO3 films were patterned into 3.2 mm long and 0.1 mm wide bars by nitric acid fume etching. The gold counter electrode and contact (working) electrodes were deposited on top of the substrate and PrNiO3. A lithium-ion source was deposited on the counter electrode with electrolyte in a PDMS gasket covering the device and lithium source, as seen in Figure 1b. The electrochemistry was performed at room temperature in an Ar glovebox or in a vacuum chamber using a Biologic SP-300. The first channel performed chronopotentiometry between the counter and working electrodes, and the second channel performed chronoamperometry between the film contact electrodes; this monitored the change in PrNiO3 resistance of lithium-ion intercalation/deintercalation (Figure 1c). After reaching a prescribed resistance change, an electrical transport measurement was taken. The process was repeated on the same device for different intercalation levels. Angle-Resolved Photoemission Spectroscopy ARPES measurements were performed at the LOREA beamline of ALBA synchrotron using an MBS A-1 hemispherical analyzer with high energy resolution (better than 1 meV) and the fast Fermi surface mapping mode. The samples were cleaned in situ with an oxygen plasma source. The cleanliness and structural quality of the samples were confirmed by in situ LEED (Supporting Information Figure S16 and Results and Discussion), valence band UV photoelectron spectroscopy, and XPS of C 1s and O 1s peaks. The angular resolution and total energy resolution were 0.1° and 20 meV, respectively. The experiments were performed in the temperature range 10–200 K and photon energies between 80 and 160 eV. Supporting Information The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.5c06879. Additional characterization and analysis details; structural characterization using XRD, HRTEM, electrical resistivity, and Raman spectroscopy; details about lithium quantification via electrochemical and spectroscopic techniques; additional spectroscopic analysis including PNO data and further analysis of NNO data presented in the main text; LEED pattern of a prepared NNO sample surface; additional ARPES data and band fitting for NNO at different Li doping levels; and atomic force microscopy image of pristine and lithiated samples (PDF) nn5c06879_si_001.pdf (1.57 MB) Dynamic Doping of Nickelates with Lithium Reveals a Widely Tunable Insulator–Metal Transition with Charge Filling and Band Renormalization Regimes 18 views 0 shares 0 downloads Skip to figshare navigation 1 Supplementary Information: Dynamic doping of nickelates with lithium reveals a widely tunable insulator-metal transition with charge filling and band renormalization regimes Alan C. Zhang1†, Alejandro Álvarez-Chico2,3†, Elena Salagre1, Martin Gonzalez4,5, Catalin D. Spataru1, Joshua D. Sugar1, Adam L. Gross1, Miguel A. González-Barrio2, Pilar Segovia7,8, Massimo Tallarida9, Ji Dai9, Suhas Kumar1, A. Alec Talin1, Harold Y. Hwang5,6, Enrique G. Michel7,8*, Arantzazu Mascaraque2*, and Elliot J. Fuller1* 1Sandia National Laboratories, 7011 East Ave. Livermore, CA 94550, United States of America 2Dto. Física de Materiales, Univ. Complutense de Madrid, 28040 Madrid, Spain 3Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones Científicas (ICMM-CSIC), 28049 Madrid, Spain 4Department of Materials Science and Engineering, Stanford University, Stanford, California 94305, USA 5Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, CA 94025, USA 6Department of Applied Physics, Stanford University, Stanford, California 94305, USA 7Dto. Física Materia Condensada, Univ. Autónoma de Madrid, 28049 Madrid, Spain 8IFIMAC (Condensed Matter Physics Center), Univ. Autónoma de Madrid, 28049 Madrid, Spain 9ALBA Synchrotron Light Source, Cerdanyola del Vallès, Barcelona, Spain †contributed equally *corresponding author 2 PrNiO3 film X-ray diffraction XRD of a 33nm thick PrNiO3 grown on LSAT substrate is shown in Figure S1, it shows clear pseudocubic perovskite (00l) peaks of the PrNiO3 film that is epitaxially strained to the substrate. No other reflections were present. The Laue fringes indicate a high-quality single crystal film. Expand Terms & Conditions Most electronic Supporting Information files are available without a subscription to ACS Web Editions. Such files may be downloaded by article for research use (if there is a public use license linked to the relevant article, that license may permit other uses). Permission may be obtained from ACS for other uses through requests via the RightsLink permission system: http://pubs.acs.org/page/copyright/permissions.html. Author Information Corresponding Authors Enrique G. Michel - Dto. Física Materia Condensada, Univ. Autónoma de Madrid, Madrid 28049, Spain; IFIMAC (Condensed Matter Physics Center), Univ. Autónoma de Madrid, Madrid 28049, Spain; Orcidhttps://orcid.org/0000-0003-4207-7658; Email: enrique.garcia.michel@uam.es Arantzazu Mascaraque - Dto. Física de Materiales, Univ. Complutense de Madrid, Madrid 28040, Spain; Orcidhttps://orcid.org/0000-0002-2614-2862; Email: arantzazu.mascaraque@fis.ucm.es Elliot J. Fuller - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America; Orcidhttps://orcid.org/0000-0001-7912-8688; Email: ejfull@sandia.gov Authors Alan C. Zhang - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America Alejandro Álvarez-Chico - Dto. Física de Materiales, Univ. Complutense de Madrid, Madrid 28040, Spain; Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones Científicas (ICMM-CSIC), Madrid 28049, Spain; Orcidhttps://orcid.org/0009-0004-5050-8950 Elena Salagre - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America Martin Gonzalez - Department of Materials Science and Engineering, Stanford University, Stanford, California 94305, United States; Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, California 94025, United States Catalin D. Spataru - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America Joshua D. Sugar - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America Adam L. Gross - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America Miguel A. González-Barrio - Dto. Física de Materiales, Univ. Complutense de Madrid, Madrid 28040, Spain; Orcidhttps://orcid.org/0000-0002-4027-3711 Pilar Segovia - Dto. Física Materia Condensada, Univ. Autónoma de Madrid, Madrid 28049, Spain; IFIMAC (Condensed Matter Physics Center), Univ. Autónoma de Madrid, Madrid 28049, Spain Massimo Tallarida - ALBA Synchrotron Light Source, Cerdanyola del Vallès, Barcelona 08290, Spain Ji Dai - ALBA Synchrotron Light Source, Cerdanyola del Vallès, Barcelona 08290, Spain Suhas Kumar - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America; Orcidhttps://orcid.org/0000-0002-6772-7250 A. Alec Talin - Sandia National Laboratories, 7011 East Avenue, Livermore, California 94550, United States of America; Orcidhttps://orcid.org/0000-0002-1102-680X Harold Y. Hwang - Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, California 94025, United States; Department of Applied Physics, Stanford University, Stanford, California 94305, United States Author Contributions A.C.Z. and A.Á.-C. contributed equally. Notes The authors declare no competing financial interest. Acknowledgments This work was supported as part of the Center for Reconfigurable Electronic Materials Inspired by Nonlinear Neuron Dynamics (reMIND), an Energy Frontier Research Center funded by the US Department of Energy (DOE), Office of Science, Basic Energy Sciences., A.Z., E.S., C.S., A.L.G., J.D.S., and E.J.F. were additionally supported by the Sandia Laboratory-Directed Research and Development (LDRD) Program. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International, Inc., for the US Department of Energy’s National Nuclear Security Administration under contract DE-NA-0003525., M.G. and H.Y.H. were supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, under contract DE-AC02-76SF00515. M.A.G., P.S., E.G.M., and A.M. acknowledge the support of the Comunidad de Madrid through the TEC-2024/TEC-380 “Mag4TIC” projects and from the Spanish MICINN through grants PID2021-123295NB-I00 and TED2021-130957B-C53. E.G.M. and P.S. are funded by the “María de Maetzu” Program for Units of Excellence in R&D (Grant No. CEX2023-001316-M). The LOREA beamline is cofunded by the European Regional Development Fund (ERDF) within the “Framework of the Smart Growth Operative Program 014-2020”., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the Gap Distance and Morphology on the Plasmon Modes of Gold Nanocube Dimers

  • Barrio, Jesús
  • Manzorro, Ramon
  • Sánchez-Iglesias, Ana
  • Rodríguez-San-Miguel, David
  • Coronado-Puchau, Marc
  • Moreno, Consuelo
  • Langer, Judith
  • Fernández-Domínguez, Antonio I.
  • Trasobares, Susana
  • Liz-Marzán, Luis Manuel
  • Zamora, Felix
  • Juárez, Beatriz H.
Plasmonic metallic nanostructures have gained significant attention due to their ability to confine light at the nanoscale. In this study, the influence of minor morphological variations by truncation of different planes on the plasmonic response of colloidal Au nanocube dimers and their separation (nanogap) is investigated by electron energy loss spectroscopy (EELS). To understand the impact of these factors, two different cube models for numerical simulations have been considered: one mimicking the truncation by {111} facets, and another mimicking their truncation by {110} ones. The experimental results, supported by numerical simulations, reveal two origins for the sensitivity of EELS spectra to nanostructure truncation: the plasmonic modes' dependence on facet geometry at the nanogap between Au nanocubes and the beam position's precision, which governs excitation efficiency. Notably, the nanogap distances between Au nanocubes are accurately measured using edge spread functions from High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images, demonstrating that STEM mode provides superior precision compared to the more commonly used TEM modes. These findings contribute to a deeper understanding of the relationship between structural features and plasmonic behavior in Au nanocube dimers, crucial for the designing next-generation plasmonic devices, including quantum plasmonic systems and SERS-based sensors., B.H.J acknowledges for the project PID2020-118878RB-I00 by MICIU/AEI/10.13039/501100011033 and PID2023-151371OB-C21 by MCIN/AEI /10.13039/501100011033 and by FEDER, EU. F. Z. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities by project PID2022-138908NB-C31, and the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). F.Z. also acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. RM, ST gratefully acknowledges financial support from National Project PID2022-142312NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF- A way of making Europe”. A.I.F.-D. acknowledges funding from the Spanish Ministry of Science, Innovation and Universities through grants PID2021-126964OB-I00 and TED2021-130552B-C21. M. C. P. thanks the Spanish Ministry of Science, Innovation and Universities for an International Attraction of Talent Maria Zambrano Grant., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum valley pseudospin controlled by strain

  • Martins Quintela, Maurício F. C.
  • Sá, Miguel
  • Uría-Álvarez, Alejandro J.
  • Malakhov, Mikhail
  • Cistaro, Giovanni
  • Quereda, Jorge
  • Palacios, Juan J.
  • Picón, Antonio
Valleytronics, as an alternative to traditional electronics or spintronics, is based on the encoding of quantum information in pseudospin valley quantum numbers, rather than in charge or spin states. A key ingredient is the (optical) manipulation of valley states before loss of coherence, which can be as fast as 100 fs. Previous works have shown the possibility of valley state manipulation using external fields. Here, we propose uniaxial strain as a more flexible and robust scheme to manipulate the valley state through the breaking of the crystal symmetry and the concomitant lifting of the degeneracy of the 1s exciton energy. Our theory is corroborated by state-of-the-art numerical simulations in monolayer hBN and shows the possibility to control valley pseudospin at the attosecond timescale., The authors acknowledge financial support to the Spanish Ministry of Science, Innovation and Universities and the State Research Agency through Grants No. PID2021-126560NB-I00, No. CNS2022-135803, No. TED2021-131323B-I00, and No. PID2022-141712NB-C21 (MCIU/AEI/FEDER, UE), the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M), the Comunidad de Madrid and the Spanish State through the Recovery, Transformation and Resilience Plan [Materiales Disruptivos Bidimensionales (2D), MAD2D-CM-UAM7 Materiales Avanzados], the European Union through the Next Generation EU funds, and the Generalitat Valenciana through the Program Prometeo (2021/017). M.M. thanks the Ministry of Science and Higher Education of the Russian Federation for supporting theoretical calculations through funding the Institute of Metal Physics, as well as the Uran supercomputer at the IMM UB RAS for providing computational resources. We also acknowledge computer resources and assistance provided by Centro de Computación Científica de la Universidad Autónoma de Madrid and RES resources (FI-2024-3-0010, FI-2024-3-0011, FI-2024-2-0034, FI-2023-2-0012, FI-2022-3-0022, FI-2022-1-0031)., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emergent Topology from Landau Level Mixing in Quantum Hall-Superconductor Nanostructures

  • Baba, Yuriko
  • Levy Yeyati, Alfredo
  • Burset, Pablo
[Data Statement] The data that support the findings of this article are not publicly available. The data are available from the authors upon reasonable request., We demonstrate the emergence of novel topological phases in quantum Hall-superconductor hybrid structures driven by Landau-level mixing and spin-orbit coupling. For a narrow superconducting stripe atop a two-dimensional electron gas, hybridization of chiral Andreev edge states yields a rich phase diagram, including the unexpected realization of the long-sought p-wave superconducting state at even filling factors, thus allowing its detection at lower fields. These phases feature quantized nonlocal conductance from electron cotunneling at filling factor ν=1, coexisting with quantized crossed Andreev reflection at ν=2 leading to the appearance of a neutral mode. Numerical simulations and effective modeling reveal how spin-orbit coupling and geometry control these transitions, enabling realistic routes to engineer topology in proximized quantum Hall devices., The work was supported by Spanish CM “Talento Program” Projects No. 2019-T1/IND-14088 and No. 2023-5A/IND-28927, the Agencia Estatal de Investigación Projects No. PID2020- 117992GA-I00, No. CNS2022-135950, No. PID2023- 150224NB-I00, and No. PID2024-157821NB-I00 and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M)., With funding from the Spanish government through the 'María de Maeztu Unit of Excellence' accreditation (CEX2023-001316-M)., Peer reviewed
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Quantifying non-Gaussian diffusion in transient microscopy using excess kurtosis

  • Prins, Ferry
  • Arévalo Rodríguez, Enrique
  • Meléndez, Marc
  • Cuadra, Jorge
<p>Coprehensible analysis of anomalous diffusion in transient microscopy. We introduce the parameter of kurtosis to quantify deviations from a Gaussian shape of the exciton distribution. As a case example we emply transient scattering microscopy (TScM, or stroboSCAT) in bulk tungesten diselenide (WSe2) revealing that exciton populations drastically deviate from pure Gaussian diffusion. Numerical simulations suggest that the origin for these deviations arise from the coexistance of multiple populations at short times, while after a few ns the crucial factor become trap states.</p> <p>The full dataset consists of three complimentary datasets:</p> <ul> <li>1. Power dependent measurements. TScM measured at different injected carrier densities.</li> <li>2. Repetition rate dependent measurements. TScM measured at different laser repetition rates, keeping fluence unalttered.</li> <li>3. Results from numerical simulations.</li> </ul> <p>All the data is collected in the same WSe2 flake. The data acquisition was done using custom python code and the analysis is performed using custom python code which can be found in GitHub. https://github.com/EaRodriguez3/TM_kurtosis</p> <p>For more information about the dataset and the techniques consult the related publication (to be added at a later date) or contact us. </p>
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Determining the Free-Carrier Fraction in 2D Perovskites using Power Dependent Photoluminescence

  • Prins, Ferry
  • Cutrupi, Antonella
  • Meléndez, Marc
  • Utrera-Melero, Raquel
  • Frising, Michel
  • Arévalo Rodríguez, Enrique
  • Das, Upasana
<p>A study using power-dependent photoluminescence measurements, which allows for a correction of the excitation density and also enables the direct determination of the free carrier fraction x. We focus on two families of Ruddlesden-Popper perovskites, spanning the full range of free carrier fractions vs excitons. Our approach provides a tool for probing the nature of optically excited states in semiconductors and for investigating spatial variations.</p> <p>The full dataset consists of dataset:</p> <p>Photoluminescence Time Resolved Power Dependent Measurements of a family of RP perovskite (n=1,2,3,4,5)</p> <p></p> <p></p> <p></p> <p>All the data is collected in different flakes of RP perovskites (n=1,2,3,4,5).The data acquisition was done using custom python code and the analysis is performed using custom python code which can be found in GitHub, <a href="https://github.com/phond-uam/Power_Dependent_Photoluminescence">https://github.com/phond-uam/Power_Dependent_Photoluminescence</a></p> <p>Methodology:</p> <p>For details about sample preparation and methodology consult the related publication.</p> <p>Perovskite nanocrystal are prepared using two different cations with a hot solution synthesis approach.</p> <p>The power dependent photoluminescence measurements are taken using the combination of a picoquant diode laser (LDH-DC-375) and TSCPC module (Picoharp 300). After the laser light is filtered using a single mode fiber the light is directed towards a home-built microscope using a Nikon CFI S Plan Fluor (60x, 0.7 NA) objective. The PL is then sent to an avalanche photodiode (MPD) controlled by the TSCPC module.</p>
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tunable optical matter: electrostatic repulsion modulates near- and far-field gold nanoparticle arrangements

  • Chen, Jui-Kai
  • Olmos Trigo, Jorge
  • Louis, Boris
  • Huang, Chih-Hao
  • Rocha, Susana
  • Masuhara, Hiroshi
  • Hofkens, Johan
  • Delgado-Buscalioni, Rafael
  • Bresolí-Obach, Roger
  • Marqués, Manuel I.
  • Meléndez, Marc
The dynamics and equilibrium configurations of immersed optically-bound particles are complex phenomena involving several physical mechanisms such as optical forces, electrostatic interactions, and fluid dynamics. In this work, we unravel, using experiments and numerical simulations, the key role played by short-range electrostatic forces. The repulsive interaction among gold nanoparticles is adjusted by changing the salt concentration. When the electrostatic interaction is reduced, near-field optical binding with particles oriented along the polarization direction is promoted, while, for low values of the salt concentration, inter-particle repulsion induces far-field (FF) optical binding configurations oriented perpendicular to the polarization. The importance of electrostatic force is confirmed by a theoretical model in which the repulsive effect is explicitly tuned. The numerical results reproduce the measured particle configurations and highlight the dominant role of electrostatic interactions, particularly in FF optical binding configurations., info:eu-repo/semantics/publishedVersion
Docta Complutense
Publicación Artículo científico (JournalArticle)

Influence of carrier density and disorder on the quantum Hall plateau widths in epitaxial graphene

  • Figueruelo Campanero, Ignacio
  • Baba, Yuriko
  • Jimeno Pozo, Alejandro
  • García Pérez, Julia
  • González Herrera, Elvira María
  • Miranda, Rodolfo
  • Guinea, Francisco
  • Cánovas, Enrique
  • Granados, Daniel
  • Pantaleón, Pierre A.
  • Burset, Pablo
  • Menghini, Mariela
The half-integer quantum Hall effect in graphene, characterized by the quantization of Hall resistivity as a function of applied magnetic field, offers opportunities for advancements in quantum metrology and the understanding of topological quantum states. While the role of disorder in stabilizing quantum Hall plateaus (QHPs) is widely recognized, the precise interplay between the plateaus’ width, disorder, mobility, and carrier density remains less explored. In this work, we investigate the width of the ν = 6 QHP in epitaxial graphene, focusing on two distinct regions of the device with markedly different electronic mobilities. Depending on the storage conditions, it is possible to modify the carrier density of graphene QHE devices and consequently increase or reduce the mobility. Our experiments reveal mobility variations of up to 200%fromtheir initial value. In particular, the sample storage time and ambient conditions also cause noticeable changes in the positions and extension of the QHPs. Our results show that the QHP extension for ν = 6 differs significantly between the two regions, influenced by both mobility and disorder, rather than solely by carrier density. Transport simulations based on the Landauer–Büttiker formalism with Anderson disorder in a scaled model reveal the critical role of impurities in shaping graphene transport properties, defining the extension of the QHPs. This study provides valuable insights into the interplay between mobility, disorder, and quantum transport in graphene systems.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Dynamics and rupture of doped motility induced phase separation

  • Fernández-Quevedo García, Rodrigo
  • Chacón, Enrique
  • Tarazona, Pedro
  • Valeriani, Chantal
Adding a small amount of passive (Brownian) particles to a two-dimensional dense suspension of repulsive active Brownian particles does not affect the appearance of a motility-induced phase separation into a dense and a dilute phase, caused by the persistence of the active particles' direction of motion. Unlike a purely active suspension, the dense slab formed in an elongated system of a passive–active mixture may show, over long periods of time, a stable and well-defined propagation of the interfaces, because of the symmetry breaking caused by the depletion of passive particles on one side of the slab. We investigate these dynamical structures via average density profile calculations, revealing an asymmetry between the two interfaces, and enabling a kinetic analysis of the slab movement. The apparent movement of the dense slab is not a pure source/sink effect, nor a rigid displacement of all the particles, but a self-sustained combination of both effects. Furthermore, we analyse the specific fluctuations that produce, cancel and abruptly reverse the slab motion.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Magnetic field screening of 2D materials revealed by magnetic force microscopy

  • Aldave, Diego A
  • López-Polín, Guillermo
  • Calle, Esther
  • Begué Gracia, Adrián
  • Ranchal Sánchez, Rocío
  • Martínez, Raúl
  • Bran, Cristina
  • Burzurí, Enrique
  • Gómez Herrero, Julio
  • Ares, Pablo
  • Jaafar, Miriam
2D materials possess exceptional mechanical properties making them promising candidates for protecting nanostructures. However, the magnetic field screening properties of 2D materials are largely unexplored. Here it is used Magnetic Force Microscopy (MFM) to unveil the effects on the magnetic field of magnetic nanostructures when 2D materials are placed on top of them. It is demonstrated that while graphene exhibits a weak diamagnetic response due to its unique electronic structure around the Dirac point, the overall screening effect remains minimal (≈0.5% per layer). Conversely, graphene oxide (GO) and MoS2 show negligible response to the magnetic field, making them ideal for applications where preserving the original magnetic properties is crucial. These findings suggest that 2D materials can offer effective protection while minimally affecting the underlying magnetic functionalities, important for data storage technologies and spintronics.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Tuning the spin transition and carrier type in rare-earth cobaltates via compositional complexity

  • Zhang, Alan
  • Oh, Sangheon
  • Choi, Byoung Ki
  • Rotenberg, Eli
  • Brown, Timothy D.
  • Spataru, Catalin D
  • Kinigstein, Eli
  • Guo, Jinghua
  • Sugar, Joshua D.
  • Salagre, Elena
  • Mascaraque Susunaga, Arantzazu
  • Michel, Enrique G.
  • Shad, Alison C
  • Zhu, Jacklyn
  • Suhas Kumar1
  • Witman, Matthew D.
  • Kumar, Suhas
  • Talin, A. Alec
  • Fuller, Elliot J.
There is growing interest in material candidates with properties that can be engineered beyond traditional design limits. Compositionally complex oxides (CCO), often called high entropy oxides, are excellent candidates, wherein a lattice site shares more than four cations, forming single-phase solid solutions with unique properties. However, the nature of compositional complexity in dictating properties remains unclear, with characteristics that are difficult to calculate from first principles. Here, compositional complexity is demonstrated as a tunable parameter in a spin-transition oxide semiconductor La1− x(Nd, Sm, Gd, Y)x/4CoO3, by varying the population x of rare earth cations over 0.00≤ x≤ 0.80. Across the series, increasing complexity is revealed to systematically improve crystallinity, increase the amount of electron versus hole carriers, and tune the spin transition temperature and on-off ratio. At high a population (x = 0.8), Seebeck measurements indicate a crossover from hole-majority to electron-majority conduction without the introduction of conventional electron donors, and tunable complexity is proposed as new method to dope semiconductors. First principles calculations combined with angle resolved photoemission reveal an unconventional doping mechanism of lattice distortions leading to asymmetric hole localization over electrons. Thus, tunable complexity is demonstrated as a facile knob to improve crystallinity, tune electronic transitions, and to dope semiconductors beyond traditional means.