Pasar al contenido principal

NUEVAS NANOESTRUCTURAS 1D-HIBRIDAS MULTIFUNCIONALES PARA EL DESARROLLO DE NANOSISTEMAS AUTOALIMENTADOS

MAT2013-42900-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultraviolet pretreatment of titanium dioxide and tin-doped indium oxide surfaces as a promoter of the adsorption of organic molecules in dry deposition processes: light patterning of organic nanowires

  • Oulad-Zian, Youssef
  • Sánchez-Valencia, J. R.
  • Parra-Barranco, J.
  • Hamad, Said
  • Espinós, J.P.
  • Barranco, Ángel
  • Ferrer, F. J.
  • Coll, Mariona
  • Borrás, Ana
In this article we present the preactivation of TiO2 and ITO by UV irradiation under ambient conditions as a tool to enhance the incorporation of organic molecules on these oxides by evaporation at low pressures. The deposition of π-stacked molecules on TiO2 and ITO at controlled substrate temperature and in the presence of Ar is thoroughly followed by SEM, UV–vis, XRD, RBS, and photoluminescence spectroscopy, and the effect is exploited for the patterning formation of small-molecule organic nanowires (ONWs). X-ray photoelectron spectroscopy (XPS) in situ experiments and molecular dynamics simulations add critical information to fully elucidate the mechanism behind the increase in the number of adsorption centers for the organic molecules. Finally, the formation of hybrid organic/inorganic semiconductors is also explored as a result of the controlled vacuum sublimation of organic molecules on the open thin film microstructure of mesoporous TiO2., We thank the Junta de Andalucia (TEP8067, FQM-6900, and P12-FQM-2265) and the Spanish Ministry of Economy and Competitiveness (projects CONSOLIDER-CSD 2008-00023, MAT2011-28345-C02-02, MAT2013-40852-R, MAT2013- 42900-P, and RECUPERA 2020) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating low energy ion plasma fluxes for the growth of nanoporous thin films

  • Álvarez, Rafael
  • López-Santos, Carmen
  • Ferrer, F. J.
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The growth of nanoporous layers by plasma-assisted deposition techniques is strongly mediated by the ion fluxes in the reactor. To analyze their influence we have deposited different nanostructured thin films by the magnetron sputtering technique at oblique angles, modulating the ion fluxes in the plasma by tuning the frequency of the electromagnetic signal from pure DC to 160 kHz DC pulsed mode. In the DC case, ions possess energies below 5 eV and do not induce noticeable changes in the film structure. However, when the signal is pulsed, ions with energies up to 40 eV impinge on the film, decreasing the porosity of the layers and tilting down the porous/nanocolumnar structures. As a result, we demonstrate that the overall porosity of the layers and the tilt angle of the columns can be tailored as two independent morphological quantities., The authors thank the Junta de Andalucía (P12-FQM-2265 and P10-FQM-6900) and the Ministry of Science and Innovation (Projects CONSOLIDER CSD2008-00023, MAT2013-42900-P, MAT2013-40852-R) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured Ti thin films by magnetron sputtering at oblique angles

  • Álvarez, Rafael
  • García-Martín, José Miguel
  • García-Valenzuela, Aurelio
  • Macías-Montero, M.
  • Ferrer, F. J.
  • Santiso, José
  • Cotrino, José
  • Rico, Víctor J.
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The growth of Ti thin films by the magnetron sputtering technique at oblique angles and at room temperature is analysed from both experimental and theoretical points of view. Unlike other materials deposited in similar conditions, the nanostructure development of the Ti layers exhibits an anomalous behaviour when varying both the angle of incidence of the deposition flux and the deposition pressure. At low pressures, a sharp transition from compact to isolated, vertically aligned, nanocolumns is obtained when the angle of incidence surpasses a critical threshold. Remarkably, this transition also occurs when solely increasing the deposition pressure under certain conditions. By the characterization of the Ti layers, the realization of fundamental experiments and the use of a simple growth model, we demonstrate that surface mobilization processes associated to a highly directed momentum distribution and the relatively high kinetic energy of sputtered atoms are responsible for this behaviour, The authors thank Fundación Domingo Martínez, the Junta de Andalucía (P12-FQM-2265) and the Ministry of Science and Innovation (Projects CONSOLIDER CSD2008-00023, MAT2013-42900-P, MAT2013-40852-R, MAT2014-59772- C2-1, MAT2011-29081) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser treatment of nanoparticulated metal thin films for ceramic tile decoration

  • Rico, Víctor J.
  • Lahoz, Ruth
  • Rey-García, F.
  • Yubero, Francisco
  • Espinós, J.P.
  • Fuente, Germán F. de la
  • González-Elipe, Agustín R.
This paper presents a new method for the fabrication of metal-like decorative layers on glazed ceramic tiles. It consists of the laser treatment of copper thin films prepared by electron beam evaporation at glancing angles. A thin film of discontinuous copper nanoparticles was electron beam evaporated in an oblique angle configuration onto ceramic tiles and an ample palette of colors obtained by laser treatment both in air and in vacuum. Scanning electron microscopy (SEM and FESEM) along with UV-vis-NIR spectroscopy and time of flight secondary ion mass spectrometry (TOF-SIMS) analysis were used to characterize the differently colored layers. Based on these analyses, color development has been accounted for by a simple model considering surface melting phenomena and different microstructural and chemical transformations of the outmost surface layers of samples., Financial support from the EU (Grant LIFE11/ENV/ES560), Innovaragon (Grant ITA-DGA/ES 1368), DGA (Group T87), MINECO (Projects MAT2013-40852-R and MAT2013-42900-P), and Junta de Andalucia (Projects TEP 8067 and FQM 6900) is gratefully acknowledged. F.R.-G. acknowledges the Portuguese Science and Technology Foundation for Grant SFRH/BPD/108581/2015., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical Gas Sensing of Ammonia and Amines Based on Protonated Porphyrin/TiO2 Composite Thin Films

  • Castillero, Pedro
  • Roales, Javier
  • Lopes-Costa, Tânia
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • González-Elipe, Agustín R.
  • Pedrosa, José M.
Open porous and transparent microcolumnar structures of TiO<sub>2</sub> prepared by physical vapour deposition in glancing angle configuration (GLAD-PVD) have been used as host matrices for two different fluorescent cationic porphyrins, 5-(<i>N</i>-methyl 4-pyridyl)-10,15,20-triphenyl porphine chloride (MMPyP) and meso-tetra (<i>N</i>-methyl 4-pyridyl) porphine tetrachloride (TMPyP). The porphyrins have been anchored by electrostatic interactions to the microcolumns by self-assembly through the dip-coating method. These porphyrin/TiO<sub>2</sub> composites have been used as gas sensors for ammonia and amines through previous protonation of the porphyrin with HCl followed by subsequent exposure to the basic analyte. UV–vis absorption, emission, and time-resolved spectroscopies have been used to confirm the protonation–deprotonation of the two porphyrins and to follow their spectral changes in the presence of the analytes. The monocationic porphyrin has been found to be more sensible (up to 10 times) than its tetracationic counterpart. This result has been attributed to the different anchoring arrangements of the two porphyrins to the TiO<sub>2</sub> surface and their different states of aggregation within the film. Finally, there was an observed decrease of the emission fluorescence intensity in consecutive cycles of exposure and recovery due to the formation of ammonium chloride inside the film., We thank the Junta de Andalucía (Project: FQM-2310), the European Regional Development Funds program (EU-FEDER) and the Spanish Ministry of Economy and Competitiveness (Projects: MAT2013-40852-R, MAT2013-42900-P, MAT2014-57652-C2-2-R, MAT2015-69035-REDC, MINECO-CSIC 201560E055, PCIN-2015-169-C02-02 under a 2014 M-Era.Net project and RECUPERA 2020), for financial support. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

“In situ” XPS studies of laser-induced surface nitridation and oxidation of tantalum

  • Lahoz, Ruth
  • Espinós, J.P.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
  • Fuente, Germán F. de la
This work studies the nitridation of Ta by laser irradiation by means of x-ray photoelectron spectroscopy. The study has been carried out under in situ conditions by controlling the nitrogen partial pressure, the presence of traces of oxygen, and the irradiance of the laser. It is found that a thin layer of Ta2O5 is directly obtained when irradiating in the presence of oxygen, while a Ta3N5 surface compound and some minor contributions of nonstoichiometric phases are formed in the presence of nitrogen. For O2:N2 mixtures at 0.1 Pa, preferential nitride formation occurs up to a ratio of 1:4, while Ta2O5 starts to be predominant for ratios above this value. The air stability of the tantalum nitride layer formed by laser irradiation and the surface topography of the irradiated metal are also studied. The possible factors determining this behavior are discussed., Authors thank the European Union (Project CERAMGLASS, Life-ENV/ES/560), the Spanish Ministry of Science and Innovation (Projects CONSOLIDER CSD2008-00023, MAT2013-42900-P and MAT2013-40852-R), the “Junta de Andalucía” (Projects TEP8067, FQM-6900 and FQM-2265) and the “Diputación General de Aragón” (Research Group T87) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallization of ceramic substrates by laser induced decomposition of coordination complexes

  • Rico, Víctor J.
  • López-Gascón, Clarisa
  • Espinós, J.P.
  • Lahoz, Ruth
  • Laguna, Mariano
  • González-Elipe, Agustín R.
  • Fuente, Germán F. de la
This work describes an in-situ Nd:YAG laser-assisted coating method to modify industrial glazed ceramic surfaces. The method makes use of a Cu polymer coordination complex, transformed via 1064 nm continuos wave (cw) laser irradiation, into a lustre-type glassy coating covering the ceramic substrate. The obtained coatings, with typical thicknesses ranging between 4 and 14 μm, become integrated onto the ceramic glaze via a sharp interface, as found by SEM observation. Diffuse Reflectance UV-vis spectroscopy shows that the lustre effect arises from surface plasmon resonant effects associated to the formation of nanometric size Cu particles dispersed throughout the glaze coating. This was confirmed by XPS analysis and other techniques showing that the laser decomposition treatment induces the redox transformation of the Cu (II) complexes, present in the original precursor, into reduced Cu (0) nanoparticles., Financial support from the EU (LIFE11/ENV/ES560), Innovaragón (ITA-DGA/ES 1368), DGA (Group T87), and projects MAT2013-40852-R and MAT2013- 42900-P from MINECO and TEP 8067 and FQM 6900 from the Junta de Andalucía is greatfully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure of mixed oxide thin films prepared by magnetron sputtering at oblique angles

  • Gil-Rostra, J.
  • García-García, Francisco J.
  • Ferrer, F. J.
  • González-Elipe, Agustín R.
  • Yubero, Francisco
Several mixed oxide thin film series of samples (Si¿Co¿O, Si¿Ni¿O, Si¿W¿O) have been prepared by reactive magnetron sputtering at oblique angle geometries. The paper focuses on the description of microstructure of the films as a function of their stoichiometry. It is found that for identical process parameters (gas mixture, pressure, magnetron-substrate distance, incidence angle of the vapour flux, etc.) the tilt angle of the developed columnar microstructure and the film porosity is strongly dependent on the stoichiometry of the films. The results are discussed in the framework of several theoretical models on this topic., The authors thank Junta de Andalucia (Projects TEP8067, and FQM-2265) and Ministry of Science and Innovation (Projects MAT2013-42900-P, and MAT2013-40852-R) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-rate deposition of stoichiometric compounds by reactive magnetron sputtering at oblique angles

  • Álvarez, Rafael
  • García-Valenzuela, Aurelio
  • López-Santos, Carmen
  • Ferrer, F. J.
  • Rico, Víctor J.
  • Escobar Galindo, R.
  • González-Elipe, Agustín R.
  • Palmero, Alberto
Target poisoning in reactive magnetron sputtering deposition of thin films is an undesired phenomenon, well known for causing a drastic fall of the process efficiency. We demonstrate that when this technique is operated at oblique angles, films with composition raging from pure metallic to stoichiometric compound can be grown in non-poisoned conditions, thus avoiding most of the associated drawbacks. We have employed amorphous TiOx, although the presented results can be easily extrapolated to other materials and conditions. It is found that the proposed method improves 400% the growth rate of TiO2 thin films., The authors thank the Junta de Andalucía (P12-FQM-2265) and the Spanish Ministry of Economy and Competitiveness (Projects MAT2013-42900-P, MAT2013-40852-R, MINECO-CSIC 201560E055) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cathode and ion-luminescence of Eu:ZnO thin films prepared by reactive magnetron sputtering and plasma decomposition of non-volatile precursors

  • Gil-Rostra, J.
  • Ferrer, F. J.
  • Martín, Inocencio R.
  • González-Elipe, Agustín R.
  • Yubero, Francisco
This paper reports the luminescent behavior of Eu:ZnO thin films prepared by an one-step procedure that combines reactive magnetron sputtering deposition of ZnO with the plasma activated decomposition of a non-volatile acetylacetonate precursor of Eu sublimated in an effusion cell. Chemical composition and microstructure of the Eu:ZnO thin films have been characterized by several methods and their photo-, cathode- and ion-luminescent properties studied as a function of Eu concentration. The high transparency and well controlled optical properties of the films have demonstrated to be ideal for the development of cathode- and ion- luminescence sensors., The authors thank the Junta de Andalucía (projects FQM-6900, TEP-8067 and FQM-2265) and the MINECO (Projects CONSOLIDER CSD2008-00023, MAT2013-40852-R and MAT2013-42900-P) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stoichiometric control of SiOx thin films grown by reactive magnetron sputtering at oblique angles

  • García-Valenzuela, Aurelio
  • Álvarez, Rafael
  • López-Santos, Carmen
  • Ferrer, F. J.
  • Rico, Víctor J.
  • Escobar Galindo, R.
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The deposition of SiO (X ≤ 2) compound thin films by the reactive magnetron sputtering technique at oblique angles is studied from both theoretical and experimental points of view. A simple mathematical formula that links the film stoichiometry and the deposition conditions is deduced. Numerous experiments have been carried out to test this formula at different deposition pressures and oblique angle geometries obtaining a fairly good agreement in all studied conditions. It is found that, at low deposition pressures, the proportion of oxygen with respect to silicon in the film increases a factor of ∼5 when solely tilting the film substrate with respect to the target, whereas at high pressures the film stoichiometry depends very weakly on the tilt angle. This behavior is explained by considering the fundamental processes mediating the growth of the film by this technique., The authors thank the Junta de Andalucía (P12-FQM-2265) and the Spanish Ministry of Economy and Competitiveness (Projects MAT2013-42900-P, MAT2013-40852-R, MINECO-CSIC 201560E055) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multicolored emission and lasing in DCM-adamantane plasma nanocomposite optical films

  • Alcaire, María
  • Cerdán, L.
  • Lahoz, F.
  • Aparicio, Francisco J.
  • González, J. C.
  • Ferrer, F. J.
  • Borrás, Ana
  • Espinós, J.P.
  • Barranco, Ángel
We present a low-temperature versatile protocol for the fabrication of plasma nanocomposite thin films to act as tunable emitters and optical gain media. The films are obtained by the remote plasma-assisted deposition of a 4-(dicyano-methylene)-2-methyl-6-(4-dimethylamino-styryl)-4H-pyran (DCM) laser dye alongside adamantane. The experimental parameters that determine the concentration of the dye in the films and their optical properties, including light absorption, the refractive index, and luminescence, are evaluated. Amplified spontaneous emission experiments in the DCM/adamantane nanocomposite waveguides show the improvement of the copolymerized nanocomposites’ properties compared to films that were deposited with DCM as the sole precursor. Moreover, one-dimensional distributed feed-back laser emission is demonstrated and characterized in some of the nanocomposite films that are studied. These results open new paths for the optimization of the optical and lasing properties of plasma nanocomposite polymers, which can be straightforwardly integrated as active components in optoelectronic devices., The authors thank the European Regional Development Funds program (EU-FEDER), the Junta de Andalucia (TEP8067), and the Spanish Ministry of Economy and Competitiveness (Project Nos. MAT2016-79866-R, MAT2013-40852-R, MAT2013-42900-P, MAT2014-51937-C3-1-P, RECUPERA 2020, and IJCI-2014-21226) for their financial support., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ determination of the water condensation mechanisms on superhydrophobic and superhydrophilic titanium dioxide nanotubes

  • Macías-Montero, M.
  • López-Santos, Carmen
  • Filippin, Nicolas
  • Rico, Víctor J.
  • Espinós, J.P.
  • Fraxedas, J.
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • González-Elipe, Agustín R.
  • Borrás, Ana
One-dimensional (1D) nanostructured surfaces based on high-density arrays of nanowires and nanotubes of photoactive titanium dioxide (TiO2) present a tunable wetting behavior from superhydrophobic to superhydrophilic states. These situations are depicted in a reversible way by simply irradiating with ultraviolet light (superhydrophobic to superhydrophilic) and storage in dark. In this article, we combine in situ environmental scanning electron microscopy (ESEM) and near ambient pressure photoemission analysis (NAPP) to understand this transition. These experiments reveal complementary information at microscopic and atomic level reflecting the surface wettability and chemical state modifications experienced by these 1D surfaces upon irradiation. We pay special attention to the role of the water condensation mechanisms and try to elucidate the relationship between apparent water contact angles of sessile drops under ambient conditions at the macroscale with the formation of droplets by water condensation at low temperature and increasing humidity on the nanotubes' surfaces. Thus, for the as-grown nanotubes, we reveal a metastable and superhydrophobic Cassie state for sessile drops that tunes toward water dropwise condensation at the microscale compatible with a partial hydrophobic Wenzel state. For the UV-irradiated surfaces, a filmwise wetting behavior is observed for both condensed water and sessile droplets. NAPP analyses show a hydroxyl accumulation on the as-grown nanotubes surfaces during the exposure to water condensation conditions, whereas the water filmwise condensation on a previously hydroxyl enriched surface is proved for the superhydrophilic counterpart., We thank the Junta de Andalucia (TEP8067, FQM-196, and P12-FQM-2265), the European Regional Development Funds program (EU-FEDER), and the AEI and MINECO (projects MAT2013-40852-R, MAT2013-42900-P, MINECO-CSIC 201560E055, and MAT2016-79866-R) for financial support,, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembly of the non-planar Fe(III) phthalocyanine small-molecule: unraveling the impact on the magnetic properties of organic nanowires

  • Filippin, Nicolas
  • López-Flores, Víctor
  • Rojas, T. Cristina
  • Saghi, Zineb
  • Rico, Víctor J.
  • Sánchez-Valencia, J. R.
  • Espinós, J.P.
  • Zitolo, Andrea
  • Viret, Michel
  • Midgley, Paul A.
  • Barranco, Ángel
  • Borrás, Ana
In this article we show for the first time the formation of magnetic supported organic nanowires (ONWs) driven by self-assembly of a nonplanar Fe(III) phthalocyanine chloride (FePcCl) molecule. The ONWs grow by a crystallization mechanism on roughness-tailored substrates. The growth methodology consists of a vapor deposition under low vacuum and mild temperature conditions. The structure, microstructure, and chemical composition of the FePcCl NWs are thoroughly elucidated and compared with those of Fe(II) phthalocyanine NWs by a consistent and complementary combination of advanced electron microscopies and X-ray spectroscopies. In a further step, we vertically align the NWs by conformal deposition of a SiO2 shell. Such orientation is critical to analyze the magnetic properties of the FePcCl and FePc supported NWs. A ferromagnetic behavior below 30 K with an easy axis perpendicular to the phthalocyanine plane was observed in the two cases with the FePcCl nanowires presenting a wider hysteresis. These results open the path to the fabrication of nanostructured one-dimensional small-molecule spintronic devices., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization and application of a new pH sensor based on magnetron sputtered porous WO3 thin films deposited at oblique angles

  • Salazar, Pedro
  • García-García, Francisco J.
  • Yubero, Francisco
  • Gil-Rostra, J.
  • González-Elipe, Agustín R.
In this communication we report about an outstanding solid-state pH sensor based on amorphous nanocolumnar porous thin film electrodes. Transparent WO thin films were deposited by reactive magnetron sputtering in an oblique angle configuration to enhance their porosity onto indium tin oxide (ITO) and screen printed electrodes (SPE). The potentiometric pH response of the nanoporous WO-modified ITO electrode revealed a quasi-Nernstian behaviour, i.e. a linear working range from pH 1 to 12 with a slope of about -57.7 mV/pH. pH detection with this electrode was quite reproducible, displayed excellent anti-interference properties and a high stable response that remained unaltered over at least 3 months. Finally, a pH sensor was developed using nanoporous WO-modified screen printed electrode (SPE) using a polypyrrole-modified Ag/AgCl electrode as internal reference electrode. This full solid state pH sensor presented a Nernstian behaviour with a slope of about -59 mV/pH and offered important analytical and operation advantages for decentralized pH measurements in different applications., The funds for the development of the present work have been provided by the MINECO (projects RECUPERA 2020 together with the ⿿Fondo social Europeo⿿, MAT2013-40852-R and MAT2013-42900-P) and the Junta de Andalucía(TEP 8067 and FQM 6900).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-enzymataic Glucose electrochemical sensor made of porous NiO thin films prepared by reactive magnetron sputtering at oblique angles

  • García-García, Francisco J.
  • Salazar, Pedro
  • Yubero, Francisco
  • González-Elipe, Agustín R.
Porous nanostructured NiO thin films have been prepared in one step by magnetron sputtering in an oblique angle configuration (MS-OAD) and used as electrodes for the non-enzymatic detection of glucose. The films have been thoroughly characterized by different complementary techniques and their performance for the analysis of glucose in basic solutions determined by electrochemical methods. These electrodes presented four times higher sensitivity that equivalent compact thin films prepared by MS in a normal configuration and were superior in terms of sensitivity than majority of nickel based electrodes prepared by other methods. Finally, a high sensitivity towards detection of glucose in blood, insensitivity to common interferences, a long term stability and high reproducibility confirmed the good performance and reliability of these electrodes for practical analytical purposes., The funds for the development of the present work have been provided by the MINECO (projects RECUPERA 2020 together with the “Fondo social Europeo”, MAT2013-40852-R and MAT2013-42900-P) and the Junta de Andalucía (TEP 8067 and FQM 6900).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glutamate microbiosensors based on Prussian blue modified carbon fiber electrodes for neuroscience applications: in-vitro characterization

  • Salazar, P.
  • Martín, M.
  • O'Neill, R. D.
  • González-Mora, José Luis
Herein we report a Prussian Blue modified carbon fiber electrode (CFE/PB) to be used in microbiosensors for glutamate monitoring in physiological applications as an alternative to the classical Pt and Pt-Ir transducers. Their low dimensions (∼250 μm CFE length and ∼10 μm diameter) are advantageous for measuring in living tissues. In addition, PB-modified microelectrodes allow the detection of enzyme-generated hydrogen peroxide at a low applied potential (∼0.0 V against SCE), contrasting the high potential used in many previous designs (∼0.7 V), decreasing the endogenous interference contributions. Moreover, the electrosynthesized polymer, poly-o-phenylenediamine (PoPD), was used to improve biosensor stability and selectivity. CFE/PB was conveniently characterized using impedance, Raman and XPS spectroscopies. Optimization of the fabrication procedure and analytical conditions is described, including activation of CFE/PB, enzyme enrichment, cross-linking, stabilization and anti-interference. A range of analytical parameters were also characterized such as sensitivity, limit of detection, linear range, and enzymatic loading. Finally, an optimized biosensor displaying a linear sensitivity of 135 ± 2 nA μM cm (n = 3), LOD of <2 μM, linear range up to 150 μM and effectively free of interference, is proposed as a suitable candidate for in-vivo glutamate monitoring in the central nervous system., This research was supported by the grant INNPACTO-MINECO (IPT-2012-0961-300000), Ministerio de Ciencia e Innovación (TIN2011-28146), project RECUPERA 2020 from MINECO and the “Fondo social Europeo”, project MAT2013-40852-R and MAT2013-42900-P from MINECO and TEP8067 and FQM6900 from the Junta de Andalucía.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of Prussian blue electrodes for amperometric detection of free chlorine in water samples using Flow injection analysis

  • Salazar, Pedro
  • Martín, Miriam
  • González-Mora, José Luis
  • González-Elipe, Agustín R.
The performance for free chlorine detection of surfactant-modified Prussian Blue screen printed carbon electrodes (SPCEs/PB-BZT) have been assessed by cyclic voltammetry and constant potential amperometry. The characterization of SPCEs/PB-BZT by X-ray photoemission, Raman and infrared spectroscopies confirmed the correct electrodeposition of the surfactant-modified PB film. These electrodes were incorporated in a Flow Injection device and the optimal working conditions determined as a function of experimental variables such as detection potential, electrolyte concentration or flow-rate. The sensor presented a linear response in the range 0–3 ppm free chlorine, with a sensitivity of 16.2 μA ppm−1 cm−2. The limit of detection (LOD) (S/N=3.3) and the limit of quantification (S/N=10) amounted to 8.25 and 24.6 ppb, respectively, adequate for controlling tap and drinking waters. To demonstrate the feasibility of using this free chlorine sensor for real applications possible interferences such as nitrate, nitrite and sulfate ions were successfully tested and discarded. Real free chlorine analysis was carried out in spiked tap water samples and commercial bleaches., The funds for the development of the present work have been provided by the MINECO (projects RECUPERA 2020 in cooperation with the >Fondo social Europeo>, MAT2013-40852-R and MAT2013-42900-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of moisture on efficiency-determining electronic processes in perovskite solar cells

  • Salado, Manuel
  • Contreras-Bernal, Lidia
  • Calió, Laura
  • Todinova, Anna
  • López-Santos, Carmen
  • Ahmad, Shahzada
  • Borrás, Ana
  • Idígoras, Jesús
  • Anta, Juan A.
Moisture-induced degradation in perovskite solar cells was thoroughly investigated by structural (SEM, EDS, XRD and XPS) and device characterization (impedance and intensity modulated photocurrent spectroscopy) techniques. Both the influence of the perovskite composition and the nature of the hole selective material were analyzed. The degradation rate was found to be significantly slower for mixed perovskites and P3HT-based devices. However, for a fixed degradation degree (defined as a 50% drop from the initial photocurrent), all configurations show similar features in small-perturbation analysis. Thus, a new mid-frequency signal appears in the impedance response, which seems to be related to charge accumulation at the interfaces. In addition, faster recombination, with a more important surface contribution, and slower transport were clearly inferred from our results. Both features can be associated with the deterioration of the contacts and the formation of a higher number of grain boundaries., We thank Junta de Andalucía for financial support via grant FQM 1851 and FQM 2310. We thank the Ministerio de Economía y Competitividad of Spain (MAT2013-47192-C3-3-R and MAT2016-76892-C3-2-R) and the EU through the Cohesion Fund and FEDER programs (MAT2013-42900-P and MAT2016-79866-R) for financial support and Red de Excelencia “Emerging photovoltaic Technologies”. SA and LC are thankful for the “Thinface” project from the European Union Seventh Framework Programme, under grant agreement no. 607232, for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural control in porous/compact multilayer systems grown by magnetron sputtering

  • García-Valenzuela, Aurelio
  • López-Santos, Carmen
  • Álvarez, Rafael
  • Rico, Víctor J.
  • Cotrino, José
  • González-Elipe, Agustín R.
  • Palmero, Alberto
In this work we analyze a phenomenon that takes place when growing magnetron sputtered porous/compact multilayer systems by alternating the oblique angle and the classical configuration geometries. We show that the compact layers develop numerous fissures rooted in the porous structures of the film below, in a phenomenon that amplifies when increasing the number of stacked layers. We demonstrate that these fissures emerge during growth due to the high roughness of the porous layers and the coarsening of a discontinuous interfacial region. To minimize this phenomenon, we have grown thin interlayers between porous and compact films under the impingement of energetic plasma ions, responsible for smoothing out the interfaces and inhibiting the formation of structural fissures. This method has been tested in practical situations for compact TiO/porous SiO multilayer systems, although it can be extrapolated to other materials and conditions., Authors acknowledge the University of Seville (VPPI-US), the Junta de Andalucía (TEP8067, TEP5283 and P12–2265MO) and the Ministry of Economy and Competitiveness of Spain (MAT2013-42900-P, MAT2013-40852-R, MAT2016-79866-R, MAT2015-69035-REDC) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced stability of perovskite solar cells incorporating dopant-free Crystalline spiro-OMeTAD layers by vacuum sublimation

  • Barranco, Ángel
  • López-Santos, Carmen
  • Idígoras, Jesús
  • Aparicio, Francisco J.
  • Obrero-Pérez, José M.
  • López-Flores, Víctor
  • Contreras-Bernal, Lidia
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Espinós, J.P.
  • Borrás, Ana
  • Anta, Juan A.
  • Sánchez-Valencia, J. R.
The main handicap still hindering the eventual exploitation of organometal halide perovskite-based solar cells is their poor stability under prolonged illumination, ambient conditions, and increased temperatures. This article shows for the first time the vacuum processing of the most widely used solid-state hole conductor (SSHC), i.e., the Spiro-OMeTAD [2,2′,7,7′-tetrakis (N,N-di-p-methoxyphenyl-amine) 9,9′-spirobifluorene], and how its dopant-free crystalline formation unprecedently improves perovskite solar cell (PSC) stability under continuous illumination by about two orders of magnitude with respect to the solution-processed reference and after annealing in air up to 200 °C. It is demonstrated that the control over the temperature of the samples during the vacuum deposition enhances the crystallinity of the SSHC, obtaining a preferential orientation along the π–π stacking direction. These results may represent a milestone toward the full vacuum processing of hybrid organic halide PSCs as well as light-emitting diodes, with promising impacts on the development of durable devices. The microstructure, purity, and crystallinity of the vacuum sublimated Spiro-OMeTAD layers are fully elucidated by applying an unparalleled set of complementary characterization techniques, including scanning electron microscopy, X-ray diffraction, grazing-incidence small-angle X-ray scattering and grazing-incidence wide-angle X-ray scattering, X-ray photoelectron spectroscopy, and Rutherford backscattering spectroscopy., The authors thank the “Agencia Estatal de Investigación”, “Consejería de Economía y Conocimiento de la Junta de Andalucía” (US‐1263142), “Ministerio de Economía y Competitividad” (MAT2016‐79866‐R, MAT2013‐42900‐P, FPA2016‐77689‐C2‐1‐R, and MAT2016‐76892‐C3‐2‐R) and the European Union (EU) through cohesion fund and FEDER 2014‐2020 programs for financial support. J.R.S.‐V. and A.B. acknowledge the EU project PlasmaPerovSol and funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement ID 661480. J.R.S.‐V‐ and M.C.L.‐S. thank the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US” (VI PPIT‐US). This research has received funding from the EU‐H2020 research and innovation programme under Grant Agreement No. 654360 having benefitted from the access provided by Technische Universität Graz at Elettra—TUG in Trieste (IT) within the framework on the NFFA (Nanoscience Foundries & Fine Analysis) Europe Transnational Access Activity. F.J.A. and J.R.S.‐V. acknowledge the “Juan de la Cierva” and “Ramon y Cajal” national programs, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Physiological Degradation Mechanisms of PLGA Membrane Films under Oxygen Plasma Treatment

  • López-Santos, Carmen
  • Terriza, A
  • Portolés, J
  • Yubero, F.
  • González-Elipe, Agustín R.
Degradation under simulated physiological conditions of poly(lactic-co-glycolic) (PLGA) copolymer membrane films subjected to an oxygen plasma treatment compared to its "as prepared" state has been studied by gas cluster ion beam assisted X-ray photoelectron spectroscopy for chemical depth profiling analysis. This investigation is complemented with atomic force microscopy, weight loss measurements, and visual inspection of the films at the different stages of the degradation process. The obtained results show that the carbon functional groups of the PLGA membrane films undergo a heterogeneous hydrolytic degradation to different rates depending on the plasma pretreatment. The content of glycolic groups (GA) in untreated PLGA samples immersed for 3 weeks in a phosphate-buffered saline solution decreased at the surface, whereas the ratio between glycolic and lactic units (LA) did not vary in the inner regions (∼400 nm depth) of the degraded membrane films. By contrast, oxygen plasma pretreatment enhances the degradation efficiency and causes that both lactic and glycolic functional components decreased at the surface and in the interior of the film, although with less prevalence for the lactic units that present a comparatively higher resistance to degradation., The authors thank the Junta de Andalucía (Projects FQM-6900, Pi-0047-2013, and FQM-2265), the MINECO (Projects CONSOLIDER CSD2008-00023, MAT2013-40852-R, MAT2013-42900-P, and RECUPERA2020-1.4.1), and the Framework Agreement with Abengoa Research for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanically Switchable Wetting Petal Effect in Self-Patterned Nanocolumnar Films on Poly(dimethylsiloxane)

  • Parra-Barranco, Julian
  • López-Santos, Carmen
  • Sánchez-Valencia, Juan Ramón
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Barranco, Ángel
Switchable mechanically induced changes in the wetting behavior of surfaces are of paramount importance for advanced microfluidic, self-cleaning and biomedical applications. In this work we show that the well-known polydimethylsiloxane (PDMS) elastomer develops self-patterning when it is coated with nanostructured TiO2 films prepared by physical vapor deposition at glancing angles and subsequently subjected to a mechanical deformation. Thus, unlike the disordered wrinkled surfaces typically created by deformation of the bare elastomer, well-ordered and aligned micro-scaled grooves form on TiO2/PDMS after the first post-deposition bending or stretching event. These regularly patterned surfaces can be reversibly modified by mechanical deformation, thereby inducing a switchable and reversible wetting petal effect and the sliding of liquid droplets. When performed in a dynamic way, this mechanical actuation produces a unique capacity of liquid droplets (water and diiodomethane) transport and tweezing, this latter through their selective capture and release depending on their volume and chemical characteristics. Scanning electron and atomic force microscopy studies of the strained samples showed that a dual-scale roughness, a parallel alignment of patterned grooves and their reversible widening upon deformation, are critical factors controlling this singular sliding behavior and the possibility to tailor their response by the appropriate manufacturing of surface structures., The projects leading to this article received funding from the EU H2020 program under the grant agreement 899352 (FETOPEN-01-2018-2019-2020—SOUNDofICE), the AEI-MICINN (PID2019-110430GB-C21 and PID2019-109603RA-I0, MAT2013-40852-R, MAT2013- 42900-P and MINECO-CSIC 201560E055) and the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects ref. AT17-6079, P18-RT-3480)., The authors thank the AEI-MICINN (PID2019-110430GB-C21 and PID2019-109603RA-I0, MAT2013-40852-R, MAT2013- 42900-P and MINECO-CSIC 201560E055), the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects ref. AT17-6079, P18-RT-3480, US-1263142 and US-1381045) and the EU through cohesion fund and FEDER 2014–2020 and the EU H2020 program under the grant agreement 899352 (FETOPEN-01-2018-2019-2020—SOUNDofICE). C.L.-S. and J.R.S.-V. thank the University of Seville through the VI PPIT-US program. J.R.S.-V. thanks the Ramon y Cajal Spanish National program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical activation of an oblique angle deposited Cu catalyst film for H2 production

  • González-Cobos, Jesús
  • Rico, Víctor J.
  • González-Elipe, Agustín R.
  • Valverde, José L.
  • De Lucas-Consuegra, Antonio
A novel Cu catalyst film was prepared by oblique angle physical vapour deposition (OAD) on a K-βAl2O3 solid electrolyte (alkaline ionic conductor) for catalytic/electrocatalytic purposes. This technique allowed us to obtain a highly porous and electrically conductive Cu catalyst electrode which was tested in the partial oxidation of methanol (POM) reaction for H2 production and its catalytic activity was in situ enhanced via electrochemical promotion of catalysis (EPOC). The electropromotional effect was reversible and reproducible, and allowed us to increase both hydrogen and methyl formate production rates by almost three times under optimal promotion conditions (320 °C, 2.2 × 10−7 mol of K+ transferred). The observed promotional effect was attributed to a decrease in the Cu catalyst work function as a consequence of the controlled migration of electropositive K+ ions which favoured the chemisorption of electron acceptor molecules (O2) at the expense of the electron donor ones (CH3OH). Under the reaction conditions these ions formed some kinds of potassium surface compounds as demonstrated by SEM, EDX and XPS post-reaction characterization analyses. The obtained results demonstrate the interest of the used catalyst-electrode preparation technique for the electrochemical activation of non-noble metal catalyst films., We gratefully acknowledge the Spanish Ministry of Economy and Competiveness (projects MAT2013-40852-R, MAT2013-42900-P and CTQ2013-45030-R) for financial support to this work., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

In situ determination of the water condensation mechanisms on superhydrophobic and superhydrophilic titanium dioxide nanotubes

  • Macias-Montero, Manuel|||0000-0002-5508-928X
  • Lopez-Santos, Carmen
  • Filippin, A. Nicolas
  • Rico, Victor J.|||0000-0002-5083-0390
  • Espinos, Juan Pedro|||0000-0002-3053-0841
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Gonzalez-Elipe, Agustín|||0000-0002-6417-1437
  • Borras, Ana|||0000-0001-8799-2054
One-dimensional (1D) nanostructured surfaces based on high-density arrays of nanowires and nanotubes of photoactive titanium dioxide (TiO) present a tunable wetting behavior from superhydrophobic to superhydrophilic states. These situations are depicted in a reversible way by simply irradiating with ultraviolet light (superhydrophobic to superhydrophilic) and storage in dark. In this article, we combine in situ environmental scanning electron microscopy (ESEM) and near ambient pressure photoemission analysis (NAPP) to understand this transition. These experiments reveal complementary information at microscopic and atomic level reflecting the surface wettability and chemical state modifications experienced by these 1D surfaces upon irradiation. We pay special attention to the role of the water condensation mechanisms and try to elucidate the relationship between apparent water contact angles of sessile drops under ambient conditions at the macroscale with the formation of droplets by water condensation at low temperature and increasing humidity on the nanotubes' surfaces. Thus, for the as-grown nanotubes, we reveal a metastable and superhydrophobic Cassie state for sessile drops that tunes toward water dropwise condensation at the microscale compatible with a partial hydrophobic Wenzel state. For the UV-irradiated surfaces, a filmwise wetting behavior is observed for both condensed water and sessile droplets. NAPP analyses show a hydroxyl accumulation on the as-grown nanotubes surfaces during the exposure to water condensation conditions, whereas the water filmwise condensation on a previously hydroxyl enriched surface is proved for the superhydrophilic counterpart.