Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 69
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Framework Reduction of GeO2 Zeolites during Calcination

  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Camblor, M.A.
Calcination in air of GeO2 zeolites with AST topology causes reduction of the framework, hence structural destruction, in a notable extension. This is due to the impossibility for the organic cation occluded inside to react with ambient oxygen. As the temperature increases, reoxidation in air of the reduced framework causes episodes of weight-gain. When calcination is carried out in N-2, weight losses close to 70% imply a loss of Ge due to sublimation of germanium monoxide, GeO. The nature of the organic cation occluded determines the nature and oxidation state of the final residue after calcination in N-2: for tetramethylammonium the residue is GeO2 while trimethyl-terc-butylammonium, thanks to its larger C content, yields metallic Ge. Framework organoreduction is not unique to GeO2-AST zeolites but also occurs during the calcination in air of other germanium containing zeolites with larger pore openings., The authors thank the Spanish Ministery of Economy and Competitiveness (Projects MAT2012-31759, MAT2015-71117-R, and MAT2012-38429-C04) and Generalitat Valenciana (Grant PROMETEOII/2014/047).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sandwich-Type Zeolite Intergrowths with MFI and the Novel Extra-Large Pore IDM-1 as Ordered End-Members

  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Li, Jian
  • Mayoral, Alvaro
  • Gao, Zihao Rei
  • Camblor, Miguel A.
[EN] Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected high-resolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE), PID2019105479RB-I00 and RTI2018-101599-B-C22 (MCUI/AEI/ FEDER, UE), the Swedish Research Council (VR), and the Knut and Alice Wallenberg Foundation (KAW). L.A.V. also thanks the Generalitat Valenciana (project PROMETEO/ 2018/024). A.M. acknowledges the Spanish Ministry of Science (RYC2018-024561-I) and the Regional government of Aragon (DGA E13_20R), the National Natural Science Foundation of China (NFSC-21850410448 and NSFC21835002), and the Centre for High-resolution Electron Microscopy (C.EM), supported by SPST of ShanghaiTech University under contract No. EM02161943.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Driving the Crystallization of Zeolites

  • Lu, Peng
  • Camblor, M. A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] The synthesis of zeolites with new structures and/or improved properties heavily relies on trial and error efforts that are not entirely blind, as the large empirical background accumulated for the last 7 decades can be, to some extent, rationalized and purposefully used to make new materials. The so-called structure-directing factors may be combined to promote (or frustrate) the crystallization of a particular structure. This personal account opens with the concept of geoinspiration, as suggested by Prof. Ruiz-Hitzky, and its application to zeolite synthesis. We then provide a concise overview of structure-direction in the synthesis of zeolites and detail examples, both new and from the literature, on how they can be combined to drive the crystallization towards (or away from) structures displaying particular features., Financial support by the Spanish Ministry of Economy and Competitiveness (MAT2015-71117-R and AGL2015-70235-C2-R) is acknowledged. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Thanks are also due to Wikimedia Commons and Mr. A. T. Chang for the picture of the hot springs included in the frontispiece.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

IDM-1: A Zeolite with Intersecting Medium and Extra-Large Pores Built as an Expansion of Zeolite MFI

  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Li, Jian
  • Gao, Zihao
  • Sun, Junliang
  • Camblor, Miguel A.
[EN] IDM-1 is a new silica zeolite with an ordered and well-defined framework constructed by alternating pentasil layers and interrupted layers, giving rise to an intersecting system of straight medium pores and undulating extra-large lobed pores. This unique structure was solved by rotation electron diffraction and refined against synchrotron powder X-ray diffraction data. Despite the presence of both Si(OSi)(3)(OH) and Si(OSi)(2)(OH)(2) sites, this new zeolite presents high thermal stability, withstanding calcination even to 1000 degrees C. The location of defects at specific sites of the structure results in alternating hydrophobic SiO2 and hydrophilic SiO(2-x)(OH)(2x) intracrystalline regions. This peculiar combination of intersecting medium and extra-large pores and alternating regions of different chemical character may provide this zeolite with unique catalytic properties., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE) and RTI2018-101599-B-C22 (MCUI/AEI/FEDER, UE), the National Natural Science Foundation of China (No. 21871009, 21621061, 21527803, 21471009), the Swedish Research Council (VR) and the Knut and Alice Wallenberg Foundation (KAW). L.A.V. also thanks the Generalitat Valenciana (project PROMETEO/2018/024). Synchrotron experiments were performed at beamline BL04 (MSPD) at ALBA Synchrotron with the collaboration of ALBA staff, and special thanks are due to A. Manjon for support in collecting the data and for helpful comments and suggestions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Introduction to the Zeolite Structure-Directing Phenomenon by Organic Species: General Aspects

  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
During the last years, a tremendous progress has been achieved in the application of new zeolite materials in many different sectors through different pioneering innovations in the field of zeolite synthesis. At the very core of the production of these new zeolite materials lies the use of organic species as structure-directing agents (SDA), which has been recognized as the most important factor to determine the zeolite product rendered after the crystallization process. These organic species organize the inorganic zeolitic units and drive the crystallization pathway towards the production of particular zeolite framework types. This structure-direction phenomenon frequently works in combination with several other factors related to the chemical composition of the synthesis gels, mainly use of fluoride, concentration (H2O/T ratio), and presence of different heteroatoms, which are also relevant for the crystallization of particular zeolite materials. Several properties determine the structure-directing effect of these organic species, especially their molecular size and shape, hydrophobicity, rigidity vs flexibility, and hydrothermal stability. The properties of the zeolitic materials synthesized can be tuned up to a certain point through the use of rationally selected organic species with particular physico-chemical features as SDA. In this introductory chapter, we briefly review the history of the use of organic cations as SDAs, and give the fundaments of the different aspects related to this structure-direction phenomenon and factors affecting it, explaining the main properties of SDAs, providing some examples of recent uses and trends of organic SDAs, as well as the host–guest chemistry involved. In addition, we pay particular attention to the use of imidazolium-based organic cations as SDAs because of their current relevance in the synthesis of new zeolite materials., Funding from the Spanish Ministry of Economy, Industry, and Competitiveness (through projects MAT2015-65767-P and MAT2015-71117-R) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integration of a Copper-Containing Biohybrid (CuHARS) with Cellulose for Subsequent Degradation and Biomedical Control

  • Karan, Anik
  • Darder, Margarita
  • Kansakar, Urna
  • Norcross, Zach
  • DeCoster, Mark A.
We previously described the novel synthesis of a copper high-aspect ratio structure (CuHARS) biohybrid material using cystine. While extremely stable in water, CuHARS is completely (but slowly) degradable in cellular media. Here, integration of the CuHARS into cellulose matrices was carried out to provide added control for CuHARS degradation. Synthesized CuHARS was concentrated by centrifugation and then dried. The weighed mass was re-suspended in water. CuHARS was stable in water for months without degradation. In contrast, 25 μg/mL of the CuHARS in complete cell culture media was completely degraded (slowly) in 18 days under physiological conditions. Stable integration of CuHARS into cellulose matrices was achieved through assembly by mixing cellulose micro- and nano-fibers and CuHARS in an aqueous (pulp mixture) phase, followed by drying. Additional materials were integrated to make the hybrids magnetically susceptible. The cellulose-CuHARS composite films could be transferred, weighed, and cut into usable pieces; they maintained their form after rehydration in water for at least 7 days and were compatible with cell culture studies using brain tumor (glioma) cells. These studies demonstrate utility of a CuHARS-cellulose biohybrid for applied applications including: (1) a platform for biomedical tracking and (2) integration into a 2D/3D matrix using natural products (cellulose)., This work was funded with the support of grant awards from the National Science Foundation (NSF #1547693 and NSF#1632891), and the MINECO (Spain) project MAT2015-71117-R. M. Darder acknowledges the joint sponsorship by the Fulbright Scholar Program and the Spanish Ministry of Education.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics

  • Kocjan, Andraž
  • Schmidt, Rainer
  • Lazar, Ana
  • Prado-Gonjal, Jesús
  • Kovač, Janez
  • Logar, Manca
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Ruiz-Hitzky, Eduardo
  • Wicklein, Bernd
Establishing a 3D electrically percolating network in an insulating matrix is key to numerous engineering and functional applications. To this end, using hydrophobic carbon nanofillers is tempting, but still results in suboptimal performance due to processing challenges. Here, we demonstrate how natural cellulose nanofibres can be in situ transformed into graphene-like sheets connected to a 3D network enhancing both the transport and the mechanical properties of sintered engineering ceramics. The network architecture also permits the decoupling of electrical and thermal conductivities, which represents a major obstacle in attaining efficient thermoelectric materials. We foresee that our transferable methodology can pave the way for the use of natural nanofibres to unravel the full potential of 3D graphene-like networks to accelerate development in fields like energy and telecommunications., Financial support from the Slovenian Research Agency (research core funding No. P2-0087) and the Spanish Ministry of Economy and Competitiveness (CYCIT, MAT2012-31759, MAT2015-71117-R, MAT2014-52405-C2-2-R) is acknowledged as well as from the EU Horizon 2020 research and innovation program under grant agreement No. 696656 (Graphene Core1-Graphene-based disruptive technologies). The authors thank Prof. Mutje and Dr Tarrés for providing CNF, D. Eterovič for photography, Dr I. Sabotin for EDM tests, A. Varela for EDX analysis, Dr Muñoz for access to a Raman microscope, Aljaž Ivekovič for assistance with illustrations, and Prof. Z. Shen for fruitful discussions. BW and JPG thank the Spanish MINECO for granting Juan de la Cierva fellowships (IJCI-2015-23886, FJCI-2015-24149)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured carbon-metal hybrid aerogels from bacterial cellulose

  • Wicklein, Bernd
  • Arranz, Judith
  • Mayoral, Álvaro
  • Aranda, Pilar
  • Huttel, Yves
  • Ruiz-Hitzky, Eduardo
Infiltration of nickel(II) hydroxide inside a bacterial cellulose gel followed by thermal treatment gives rise to highly crystalline nickel nanoparticles that remain associated with the generated carbon nanofibers. The involved mechanism, ascribed to a carbothermal reduction, takes place at an exceptionally low temperature (390 °C). This study suggests the reduction of the intermediate nickel oxide phase by carbon and CO generated during pyrolysis of bacterial cellulose, while the nascent nickel nanoparticles catalyze the formation of graphitic carbon in the form of carbon aerogels. This synthesis route also generates equivalent carbon–iron hybrids pointing to the extension of this procedure to other transition metals as well, thus producing conducting carbon foams with functional metal nanoparticles. This soft procedure opens way to new carbon–metal aerogels with potential interest in fields as diverse as catalysis, energy storage and optical devices., Financial support from CICYT (projects MAT2012-31759, MAT2015-71117-R). BW acknowledges an IJCI contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Si-Ge substitutional series in the chiral STW Zeolite Structure Type

  • Rigo, Reus T.
  • Balestra, Salvador R. G.
  • Hamad, Said
  • Bueno-Pérez, Rocío
  • Ruiz-Salvador, A. Rabdel
  • Calero, Sofía
  • Camblor, Miguel Ángel
The whole compositional range (Gef = Ge/(Ge+Si)= 0 to 1) of zeolite STW has been synthesized and studied by a comprehensive combined experimental--theoretical approach. The yield of zeolite goes through a maximum and then drops at the GeO2 side of the series, following the inverse of the calculated free energy curve. The unit cell generally expands, roughly linearly, as the Gef increases, but a notable resilience to expansion is observed at the high silica side. This can be attributed to the more rigid character of SiO2 and the ability of Ge units to deform. Density functional theory calculations provide a new assignment of the previously controversial 19F MAS NMR resonances for occluded fluoride, which is based not only in the number of Ge atoms in the double-4-ring units but also on the way they are associated (namely, no Ge, isolated Ge, Ge pairs or closed Ge clusters). While we found an overall good agreement between the experimental and theoretical trends in preferential occupation by Ge of different crystallographic sites, the theoretical models show more sharp and abrupt tendencies, likely due both to limitations of the approach and to kinetic factors that allow metastable configurations to actually exist., The authors thank the Spanish Ministry of Science and Competitiveness for funding (Projects MAT2015-71117-R and CTP2016-80206-P). R. T. Rigo thanks CAPES (Brazil) for a PhD fellowship (process 99999.012012/2013-00). S. R. G. Balestra thanks the Spanish State Secretariat for Research, Development and Innovation for his Predoctoral fellowship (BES-2014-067825 from CTQ2013-48396-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Clay-graphene nanoplatelets functional conducting composites

  • Ruiz-Hitzky, Eduardo
  • Sobral, Maria Madalena C.
  • Gómez Avilés, Almudena
  • Nunes, Cláudia
  • Ruiz-García, Cristina
  • Ferreira, Paula
  • Aranda, Pilar
An approach to functionalize graphene-based materials has been developed by assembling graphene nanoplatelets (GNP) with clay minerals. Under convenient sonomechanical treatment, clay–GNP mixtures may produce very stable water dispersions in particular using sepiolite fibrous clay. While in the absence of clay a rapid decantation of GNP in water is observed, in the presence of sepiolite the resulting dispersions remain stable during months without syneresis effects. Rigid but flexible self-supported films are easily obtained by filtering of these dispersions. As the electrical percolation threshold corresponds to sepiolite/GNP composites of 0.5:1 in weight, doping these systems with multiwalled carbon nanotubes (MWCNTs) significantly enhances their electrical conductivity. The particular microporosity of the sepiolite component allows interactions with molecules, such as organic dyes, as well as polymers, such as biopolymers, opening the way to functional materials for advanced applications due to their inherent conductivity afforded by the GNP and MWCNTs carbonaceous components. In fact, using very small amount of MWCNT together with GNP can obtain composites with significant electrical conductivity, maintaining the enhanced mechanical properties, at a lower cost., This work was partially supported by the MINECO, Spain (Project MAT2012‐31759 and MAT2015‐71117‐R) and FCT/MEC, Portugal (CICECO‐Aveiro Institute of Materials – POCI‐01‐0145‐FEDER‐007679, FCT UID/CTM/50011/2013), through national funds and where applicable co‐financed by the FEDER, within the PT2020 Partnership Agreement. EU COST Action MP1202 is also acknowledged. C. Nunes and P. Ferreira thank FCT for their grants SFRH/BPD/100627/2014 and IF/00327/2013, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective intercalation of zein into Na-montmorillonite: role of the protein components and use of the developed biointerfaces

  • Alcântara, Ana C. S.
  • Darder, Margarita
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Biohybrid materials based on the intercalation of zein, the major storage protein in corn, into sodium-exchanged montmorillonite were prepared following two synthesis strategies. The first one made use of zein dissolved in 80% (v/v) ethanol/water solution, the usual solvent for this protein, while the second method is new and uses a sequential process that implies the previous separation of zein components in absolute ethanol. This treatment of zein with ethanol renders a soluble yellow phase and an agglomerate of insoluble components, which are able to intercalate the layered silicate when an aqueous dispersion of montmorillonite is added to the ethanol medium containing both phases. The diverse steps in this second route were investigated individually in order to understand the underlying mechanism that drives to the intercalation of this complex hydrophobic biomacromolecule into the hydrophilic interlayer space of sodium-exchanged montmorillonite. In addition to physicochemical characterization of the resulting materials, these biohybrid interfaces were also evaluated as biofillers in the preparation of diverse ecofriendly nanocomposites., This work was supported by the MINECO (Spain) projects MAT2012-31759 & MAT2015-71117-R and the EU COST Action MP1202. A.C.S.A. acknowledges CSIC for a JAE-Predoc fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organoclay hybrid materials as precursors of porous ZnO/silica-clay heterostructures for photocatalytic applications

  • Akkari, Marwa
  • Aranda, Pilar
  • Haj Amara, Abdessalem Ben
  • Ruiz-Hitzky, Eduardo
In this study, ZnO/SiO2-clay heterostructures were successfully synthesized by a facile two-step process applied to two types of clays: montmorillonite layered silicate and sepiolite microfibrous clay mineral. In the first step, intermediate silica–organoclay hybrid heterostructures were prepared following a colloidal route based on the controlled hydrolysis of tetramethoxysilane in the presence of the starting organoclay. Later on, pre-formed ZnO nanoparticles (NP) dispersed in 2-propanol were incorporated under ultrasound irradiation to the silica–organoclay hybrid heterostructures dispersed in 2-propanol, and finally, the resulting solids were calcinated to eliminate the organic matter and to produce ZnO nanoparticles (NP) homogeneously assembled to the clay–SiO2 framework. In the case of montmorillonite the resulting materials were identified as delaminated clays of ZnO/SiO2-clay composition, whereas for sepiolite, the resulting heterostructure is constituted by the assembling of ZnO NP to the sepiolite–silica substrate only affecting the external surface of the clay. The structural and morphological features of the prepared heterostructures were characterized by diverse physico-chemical techniques (such as XRD, FTIR, TEM, FE-SEM). The efficiency of these new porous ZnO/SiO2-clay heterostructures as potential photocatalysts in the degradation of organic dyes and the removal of pharmaceutical drugs in water solution was tested using methylene blue and ibuprofen compounds, respectively, as model of pollutants., The authors thank the CSIC (i-COOP+ project COOPA20077) and the MINECO (project MAT2012-31759 and MAT2015-71117-R), Spain, and the EU (COST Action MP1202)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Clay-lipid nanohybrids: towards influenza vaccines and beyond

  • Wicklein, Bernd
  • Darder, Margarita
  • Aranda, Pilar
  • Martín del Burgo, M. Ángeles
  • Del Real Soldevilla, Gustavo
  • Esteban, Mariano
  • Ruiz-Hitzky, Eduardo
The design of nanostructured materials based on natural components, such as clay minerals, offers new solutions to biomedical challenges such as more efficient and storage-stable vaccines. Clay-lipid hybrid materials have proved useful as adjuvants in influenza vaccines and with a possible projection to leishmaniasis vaccines and other pathogens. Self-assembly of phospholipid molecules on the surface of microfibrous sepiolite and lamellar Mg/Al layered double hydroxide renders a biocompatible lipid bilayer membrane that ensures non-degrading immobilization of proteins and other biological species including viral particles and DNA (deoxyribonucleic acid). Immunization tests in mice showed the superior immunogenicity of a clay-lipid-supported virus compared to a commercial aluminium hydroxide adjuvant., This work was supported by the CICYT (Spain, projects MAT2009-09960 and AGL2007-60274) and the CSIC (Spain, projects PIF08-018 and 201060I009). BW acknowledges financial support from CICYT (Spain, projects MAT2012-31759 and MAT2015-71117-R). The authors thank Adolfo García-Sastre for providing materials and for support as PI of CRIP (Center for Research on Influenza Pathogenesis), an NIAID-funded Center of Excellence for Influenza Research and Surveillance (HHSN272201400008C).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical interactions between DNA and sepiolite nanofibers, and potential application for DNA transfer into mammalian cells

  • Castro-Smirnov, Fidel Antonio
  • Piétrement, Olivier
  • Aranda, Pilar
  • Bertrand, Jean-Rémi
  • Ayache, Jeanne
  • Cam, Eric le
  • Ruiz-Hitzky, Eduardo
  • Lopez, Bernard S.
Nanofibers of sepiolite, a natural silicate belonging to the clay minerals family, might constitute a potential promising nanocarrier for the non-viral transfer of bio-molecules. We show here that sepiolite nanofibers efficiently bind different types of DNA molecules through electrostatic interactions, hydrogen bonding, cation bridges, and van der Waals forces. Moreover, Fourier-transform infrared spectroscopy identified the external silanol groups as the main sites of interaction with the DNA. Furthermore, as a proof of concept, we show that sepiolite is able to stably transfer plasmid DNA into mammalian cells and that the efficiency can be optimized. Indeed, sonication of sepiolite 100-fold stimulated DNA transfection efficiency. These results open the way to the use of sepiolite-based biohybrids as a novel class of nanoplatform for gene transfer with potential clinical applications., This work was supported by La Ligue Nationale Contre le Cancer, ANR (Agence Nationale de la Recherche, ANR-14-CE10-0010-02), AFM-Téléthon and INCa (Institut National du Cancer, 2011-1-RT-01, 2011-1-PLBIO-09, 2013-1-PLBIO-14), the CICYT, Spain (projects MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of colored geopolymers using Maya blue-based pigments

  • Ouellet-Plamondon, C.
  • Aranda, Pilar
  • Favier, A.
  • Habert, G.
  • Van Damme, H.
  • Ruiz-Hitzky, Eduardo
Poster presented at the 8th Mid-European Clay Conference, held in Kosice (Slovakia) on July 4-8th, 2016. S6: application and treatment of clays and other industrial minerals., Geopolymers are inorganic amorphous silicon-based polymers materials of increasing scientific and industrial interest especially for engineering applications. Diverse types of clay minerals are currently explored as source in the production of such materials which are prepared at very high pH media. For certain applications it would be interesting to produce colored geopolymers, however the direct incorporation of organic dyes was not easy as they may become degraded under the extreme basic conditions used during the synthesis. In this communication, we will report a new approach that uses the concept of ancient Maya Blue pigment to encapsulate diverse organic dyes in the structural tunnels of the fibrous clay to be protected once incorporate as a pigment during the geopolymer formation. Sepiolite is relatively stable in basic media and dyes such as methylene blue (MB) and methyl red (MR) present a convenient size to be adsorbed in the clay inside its structural nanopores. In this way, when the geopolymer is formed the encapsulated organic dye is preserved and the final products show colors that made fade a little with the evolution of the polymerization reaction but remain still persistent with time once the reaction ends. The resulting colored geopolymers are highly stable to treatments with hydrogen peroxide, UV irradiation or in acid conditions. This preliminary study [1] is a first example that may open way to other approaches for functionalizing inorganic binder materials with organic elements sensitive to thermal treatments used in conventional ceramic processing., CICYT (Spain, project MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Layered double hydroxide/sepiolite heterostructured materials: preparation and applications

  • Aranda, Pilar
  • Gómez Avilés, Almudena
  • Rebitski, Ediana P.
  • Darder, Margarita
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the 8th Mid-European Clay Conference, held in Kosice (Slovakia) on July 4-8th, 2016. S6: application and treatment of clays and other industrial minerals., There is an increasing interest in the development of nanostructured materials based on the combination of diverse type of inorganic particulate solids with the aim to produce a new generation of functional materials for diverse applications. In this context, fibrous clays have been used as support of nanoparticles, as for instance metal oxides (e.g., TiO2, Fe3O4,..). This communication will introduce a new type of heterostructured materials in which layered double hydroxides (LDH) are assembled to sepiolite fibrous clay [1]. In this way, Mg-Al and Zn-Al LDH have been generated in presence of sepiolite clay, becoming linked to the fibrous silicate through the silanol groups present at its external surface. The synthesis procedure allows to tune the sepiolite:LDH relative ratio, being also possible to prepare the LDH in the presence of anionic organic species to produce the corresponding intercalation compounds. Changes in the textural properties deduced from the N2adsorption-desorption isotherms can be interpreted by the effect of sepiolite for providing a stable support where nanometric LDH particles remain attached decreasing the amount of N2 adsorbed and therefore its specific surface area. This methodology has been patented [2] and it is now applied to the preparation of diverse materials that can be of interest in diverse areas of application. For example, MgAl-LDH heterostructures show the preservation of adsorption properties ascribed to both type of inorganic components with the possibility of adsorbing simultaneously both cationic and anionic species. This has been tested in the removal of various dye pollutants. The thermal transformation of assembled ZnAl-LDH in the corresponding mixed metal oxide shows the presence of the generated nanoparticles that remain bonded ontothe silicate, confirming the interest of the approach in view to prepare highly disperse metal oxide catalysts supported on sepiolite using LDH of different composition as precursors. The assembled LDH preserves its ion-exchange capacity which can be profited to incorporate anionic species useful for other applications. Thus, the anionic herbicide known as MCPA (2-methyl-4-chlorophenoxyacetic acid) has been intercalated in the supported LDH by ion-exchange as well by co-precipitation of the LDH in presence of MCPA and the clay. The release of the herbicide from these heterostructured materials has been tested in comparison to that from the herbicide intercalated in the LDH alone., CICYT (Spain, project MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Advanced ecological applications of clay minerals

  • Ruiz-Hitzky, Eduardo
Plenary lecture given at the 8th Mid-European Clay Conference, held in Kosice (Slovakia) on July 4-8th, 2016., Nowadays advanced materials derived from clay minerals with potential applications in many diverse fields are under study and development following certain Nanoscience and Nanotechnology concepts [1]. So, novel approaches are being applying for the use of this natural resource in a rational and ecological way to prepare nanostructured materials and, vice versa to apply them in turn to reduce environmental impact. In this context some of them can be utilized, for instance, in the removal of pollutants and other kind of repair and green activities. In this context, clay minerals represent a paradigmatic example because they belong to the most widely spread type of silicates that are present in soils and ore deposits, being exploited since the dawn of humanity. In this lecture it will be introduced recent contributions from our Research Group at the Materials Science Institute of Madrid (CSIC) related to diverse clay-based nanostructured materials, showing their ability for efficient elimination in a green way of pollutants, such as hexavalent chromium, radionuclides, pesticides, drugs in urban water, etc. [2,3]. Also, it will be considered examples of clay-based biohybrids provided of specific and predetermined behavior crucial to design materials of interest as sensing agents for selective ion-recognition, virus particles immobilization for improved adjuvant of vaccines or DNA non-viral transfection [4]. Finally, this lecture will also show the production of clay-carbonaceous materials containing carbon nanotubes and graphenes of great interest for the fabrication of conducting electrodes for potential uses in energy generation and storage as well as in biosensing devices. This methodology may open the way to a future large scale production of graphene-clay based materials in an ecological way [5]. The synthetic strategies here discussed concern layered smectites and vermiculites, as well as microfibrous silicates, such as sepiolite and palygorskite, which can be used as basic building units for the design and preparation of both structural and functional materials., We thank financial support from the CICYT (Spain, projects MAT2012-31759 and MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cellulose nanofibers-sepiolite biohybrid materials

  • González del Campo, M. Mar
  • Darder, Margarita
  • Aranda, Pilar
  • Huttel, Yves
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Bionanocomposites are a type of nanostructured biohybrid materials resulting from the assembly of naturally occurring polymers and inorganic solids with particle size in the nanometer scale [1], as for instance diverse clay minerals with layered or fibrous morphology [2,3]. Amongst biopolymers, there is a special interest in the use of polysaccharides for the preparation of bionanocomposites due to their abundancy in nature and their renewable and biodegradable character. In the recent years, many works are focusing on the use of cellulose, the most abundant polysaccharide on Earth, to develop new hybrid materials involving clay minerals [4-7]. Cellulose chains consisting of β(1→4) linked D-glucose units are arranged in crystalline and amorphous regions forming elementary fibrils, which are in turn assembled forming the cellulose fibers present in the cell wall of plants [8]. In this context, the current work explores the development of biohybrids based on the assembly of cellulose nanofibers (CNF) to the fibrous clay sepiolite. For this purpose, Pangel® S9, sepiolite from Vallecas-Vicálvaro of rheological grade commercialized by Tolsa SA, was used together with CNF (dimensions around 0.5-2 μm in length and 4-20 nm in diameter), which was prepared following a reported procedure [9] and gently provided by Prof. P. Mutjé (LEPAMAP group, Univ. of Girona, Spain). Aqueous suspensions of CNF and sepiolite were combined by means of shear force and ultrasounds energy in order to produce homogenous and stable gels, which can be dried by solvent casting or vacuum filtration leading to self-standing films [7]. The sonication treatment seems to be compulsory in order to obtain uniform films with a considerable degree of transparency. The characterization of these materials reveals the good interaction between both types of fibers of biological and inorganic nature. The decrease in intensity of the IR vibration band at 3720 cm-1, related to the O-H stretching vibration of silanol groups in sepiolite, suggests a perturbation due to their hydrogen bonding interaction with hydroxyl groups in CNF. Accordingly, XPS results show a large perturbation in the C1s signal from CNF as a consequence of its interaction with sepiolite. Tensile modulus values of hybrid films show slightly higher values than those of the individual components, reaching a maximum value of 3.4 GPa for the material containing 20% sepiolite. The thermal stability was also improved as the sepiolite content increased, showing a shift in the thermal decomposition temperature towards higher values. The degree of hydrophobicity can be also controlled with the sepiolite content, and thus, water adsorption was reduced in hybrid films containing a small percentage of inorganic fibers in comparison to pristine CNF. The possibility of incorporating other nanoparticles allows the preparation of multifunctional materials [10]. For instance, multi-walled carbon nanotubes (MWCNTs) can be included in the CNF-sepiolite hybrids in order to provide them with electrical conductivity, allowing their application as active phase in sensor devices., MINECO (Spain), projects MAT2012-31759 & MAT2015-71117-R, and PhD fellowship BES-2013-064677 (MMGC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Clay-based formulations for metformin controlled release

  • Rebitski, Ediana P.
  • Aranda, Pilar
  • Darder, Margarita
  • Carraro, Rafaelle
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Currently, metformin hydrochloride is the reference drug used for the treatment of type 2 diabetes [1,2], which as it is well known, is a widespread chronic metabolic disease, characterized by elevated blood glucose (hyperglycemia) [3,4]. Metformin is able to decrease blood glucose concentration by mechanisms other than insulin or sulphonylureas [2,3]. It also decreases plasma insulin concentrations, contributing to increase peripheral glucose uptake and decreasing hepatic glucose production [5]. In this way, the glycemic index is improved without gaining weight by the patient. For optimal therapeutic effect, a metformin dosage of 250-500 mg 3-4 times daily, is required to reach a maximum of 2.5 g/day. The absolute bioavailability of metformin hydrochloride is 50-60% in which it has a biological half-life of 6.2 hours. However, the use of therapy with metformin results in a high incidence of gastrointestinal side effects [6], and therefore, it is of great relevance to produce formulations that allow a controlled release of the drug. In this context, clay minerals have proved to be efficient substrates to produce systems for controlled drug delivery [7]. Thus, here is evaluated the possibility of using montmorillonite to stabilize metformin, allowing its further incorporation in a formulation that may increase its biological half-life, decreasing the daily dosage and presumably, other side effects associated with the regular use of metformin. The selected clay mineral is a commercial sodium montmorillonite (MMT) known as Cloisite®-Nathat presents a cation exchange capacity ca. 93 mEq/100 g, and acceptable characteristics for uses in pharmacology [7]. As a first step, metformin has been intercalated in that clay by a cation-exchange reaction carried out in water under agitation during 24 h at room temperature. The resulting hybrid material has been characterized by diverse physicochemical techniques showing a drug content of 190 mEq/100g entrapped in the intracrystalline space of the silicate. The intercalation compound was also combined with pectin and chitosan to produce bionanocomposite materials, in which the presence of chitosan may have additional advantages related to its mucoadhesive properties in view to increase its permanence in the intestinal tract[8,9]. The prepared materials montmorillonite-metformin (MMT-MET) pectin-chitosan/metformin (PEC-CHT/MET) and pectin-chitosan/montmorillonite-metformin (PEC-CHT/MMT-MET) were in vitro tested in release experiments in which their passage through the gastro-intestinal tractis simulated by switching the pH conditions and the elapsed time in the different media. Based on obtained preliminary results, the PEC-CHT/MMTMET system considerably provides a good controlled release compared to the other two systems (MMT-MET and PEC-CHT/MET). Thus, pectin-chitosan/MMT-metformin formulation seems a promising candidate for the oral administration of metformin for the control of type 2 diabetes., MINECO (Spain, project MAT2015-71117-R) and CNPQ (Brazil, fellowship 204360/2014-5).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Next generation of advanced materials derived from clay minerals

  • Ruiz-Hitzky, Eduardo
Conference given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Since many centuries ago, humans have largely used day-to-day clay-based materials as clays represent an abundant, wide-spread, cheap, eco-friendly and versatile resource in Earth. Building materials, pottery, pencils and tablets for writing, and a huge variety of decorative products, are examples of world-wide traditional clay-based objects. Nowadays, at the High-Tec Era and at the Information Age, clays still play a significant role in current life addressed to the development of the so-called advanced materials based on these minerals. As it is well known, in the current global economy, most of the materials advancements are directly derived from a knowledge-based society. Particularly, research on clay minerals represents a paradigmatic field where Natural Sciences such as Geology, Physics, Chemistry and Biology, and Applied Sciences such as Materials Science and Engineering meet. Taking into account these features it arise the following key question: how can we create new clay-based advanced materials? To answer that question, it should be considered that as occurs with other type of low-dimensional inorganic colloidal particles, advanced materials derived from clay minerals could be developed under the Nanoscience and Nanotechnology concepts, in particular on the basis of the Nanoarchitectonics discipline [1]. In this way, novel approaches are being applying using this natural resource in a rational and ecological way to prepare nanostructured materials deserving diverse type of applications from energy production and storage to pharmaceutical and biomedicine fields. Recent contributions from our Group at the Materials Science Institute of Madrid (CSIC) related to diverse clay-based nanostructured materials will be introduced in this lecture and discussed on light of their promising future usages. For instance, smectites and sepiolite clay minerals deserve as starting building units that can be assembled to diverse metal and metal-oxide nanoparticles (NPs) for the design and preparation of highly-efficient adsorbents and catalysts, provided in some cases of superparamagnetic behavior giving rise to multifunctional materials useful for its easy recovery upon use. This type of nanoarchitectures can be applied in the elimination of pollutants such as organic dyes, radionuclides, pesticides and drugs in wastewater [2-5]. Furthermore, the assembly of carbon-nanoparticles, such as graphene and carbon nanotubes, to clay minerals can be achieved either by their direct combination under sonomechanical treatments or by the in situ generation of the carbon material from sucrose and other biomass sources. The resulting supported carbon materials exhibit good electrical conductivity and there is not necessary the removal of the silicate substrate for diverse applications, including clean energy production and storage, sensor devices as well as fillers of polymers for the development of conducting polymer-clay minerals nanocomposites [6,7]. Finally, by means of clay-organic interactions it can be prepared as well diverse biohybrids and bionanocomposites provided of specific and predetermined behaviors of interest in the removal of pollutants, controlled drug delivery, sensing agents for selective ion-recognition, immobilization and carrier of virus particles for improved adjuvant of vaccines [8], or as non-viral transfection vectors of nucleic acids [9]., MINECO (Spain, projects MAT2012-31759 & MAT2015-71117-R) and the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ultrasound-assisted preparation of cellulose nanocrystals-sepiolite bionanocomposites

  • Caja, Borja
  • González del Campo, M. Mar
  • Darder, Margarita
  • Aranda, Pilar
  • Vázquez Burgos, Luis
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Bionanocomposites are a group of hybrid materials resulting from the combination of naturally occurring polymers and inorganic nanoparticles, which show interesting properties such as non-toxicity, biocompatibility and biodegradability [1]. Cellulose, the most abundant biopolymer on earth, is being widely applied in diverse areas (paper industry, food and pharmaceutical sectors…) and also used in the development of bionanocomposites, in some cases based on its assembly to clay minerals [2-5]. Cellulose is a linear polysaccharide consisting of β(1→4) linked D-glucose units, present as a structural component of the cell wall mainly in higher plants. These individual polysaccharide chains are arranged in crystalline and amorphous regions in elementary fibrils that assemble into cellulose fibers [6]. Several methodologies are applied for defibrillation of wood pulp in order to give the so-called microcrystalline cellulose (50-10 μm length and 10-50 μm diameter) or nanocelluloses, including microfibrillated cellulose (0.5-1 μm length and 10-100 nm diameter) as well as cellulose nanofibers (CNF, 0.5-2 μm length and 4-20 nm diameter) or nanocrystals (CNC, 50-500 nm length and 3-5 nm diameter) [6], which are suitable for preparation of bionanocomposite materials. The current work explores the development of bionanocomposites based on the assembly of two dissimilar fibrous components: sepiolite (Pangel® S9 from Vallecas-Vicálvaro, Tolsa SA) as inorganic component, and CNC obtained from commercial microcrystalline cellulose as the biological counterpart. The methodology used for the preparation of these materials involves the application of shear force and ultrasound energy to aqueous suspensions of microcrystalline cellulose in the presence of sepiolite [5]. CNC are produced during the sonication process [7], as confirmed by FE-SEM and AFM, avoiding the use of concentrated sulfuric acid commonly employed to obtain these nanomaterials. During the sonication process, the interaction of the sepiolite fibers with the produced CNC may help to reduce their re-aggregation, in a similar way than that reported for carbon nanotubes-sepiolite systems prepared under analogous conditions [8]. Thus, the resulting gels are stable and homogeneous, and can be conformed as self-standing films by solvent casting or vacuum filtration. Their characterization by FTIR confirms the good interaction between both types of organic and inorganic fibers, revealing the establishment of hydrogen bonding interactions between the hydroxyl groups in the CNC and the silanol groups in the external surface of sepiolite. The films show improved water resistance as determined from water sorption isotherms. In addition, multifunctional materials can be easily produced by incorporating other components during the preparation step, as for instance carbon nanotubes, or by grafting or adsorbing organic molecules with the desired properties. The CNC-sepiolite films can be promising materials in diverse fields such as environmental remediation, food packaging or biomedicine., MINECO (Spain), projects MAT2012-31759 & MAT2015-71117-R, and PhD fellowship BES-2013-064677 (MMGC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zein-sepiolite superparamagnetic bionanocomposite foams

  • Alcântara, Ana C. S.
  • González-Alfaro, Y.
  • Darder, Margarita
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., Bionanocomposites are a versatile type of materials that may offer both remarkable structural and multifunctional properties [1]. Interestingly, they can be conformed by different types of processing, giving rise for instance to films and foams of interest for a wide variety of applications, such as bioplastics, gas separation membranes, adsorbents, scaffolds for tissue engineering, packaging or building insulation. In this context, bionanocomposites foams can be prepared by diverse strategies including gas foaming, particulate leaching or freeze-drying [2], being this last one the mostly applied method as hydrophilic polysaccharides or proteins are the largest employed biopolymers and water is used as their main solvent [1,2]. The presence of inorganic solids, for instance clay minerals, as fillers in the biopolymer matrix could help the foaming process, affording nucleation sites that may control the cell density and also contributing to enhance mechanical and physical properties [2,3]. Despite this, the high hydrophilicity of most of the commonly used biopolymers limits the bionanocomposite foam stability in aqueous media, hampering their use in certain applications that involve its immersion in aqueous media, e.g., removal of pollutants in water. To overcome this drawback it is possible to stabilize the foam using cross-linking agents or less hydrophilic polymers. For instance, in the case of hydrophobic biopolymers such as zein, the main storage protein of corn, polymeric foams have been prepared using supercritical CO2 or a previously modified zein with hydrophilic compounds [4,5]. Recently, our group has reported a methodology that plays with the different solubility of zein components in presence of ethanol and water to produce zein-montmorillonite nanocomposites [6]. This communication will show how this convenient property of zein can be also applied to produce bionanocomposite foams by assembly of sepiolite to zein following a process that implies the subsequent immersion of mixtures of both components in anhydrous ethanol and water, followed by a final step of freeze-drying. Bionanocomposite foams can be also prepared using a sepiolite that incorporates magnetite nanoparticles (NP) from a ferrofluid, previously prepared by a methodology that have proved to produce very stable superparamagnetic multifunctional materials [7]. As occurs in other biohybrids involving zein assembled to sepiolite and palygorskite fibrous clays [8], the presence of this protein affords hydrophobicity and stability in water to the resulting bionanocomposite foams. Moreover, the existence of strong affinity between zein and the sepiolite-based fillers results in foams that show good mechanical properties and, in certain cases, additional superparamagnetic properties, when they incorporate the magnetite- based filler. The resulting bionanocomposite foams have been tested as adsorbents of 4-chloro-2-methylphenoxyacetic acid (MCPA), here selected as model herbicide, to prove their potential usefulness in environmental remediation. Furthermore, as the zein-sepiolite superparamagnetic bionanocomposite foams could be easily recovered from the aqueous media by applying an external magnetic field (magnet) this type of adsorbent could be easily applied in open water areas., MINECO (Spain, projects MAT2012-31759 and MAT2015-71117-R) and CSIC (Spain, JAE-Pre fellowships Program).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

ZnO/sepiolite heterostructured materials for photocatalytic degradation of emerging pollutants in wastewater

  • Akkari, Marwa
  • Aranda, Pilar
  • Belver, Carolina
  • Bedia, Jorge
  • Ben Haj Amara, Abdessalem
  • Ruiz-Hitzky, Eduardo
Oral presentation given at the XVI International Clay Conference, held in Granada (Spain) on July 17-21, 2017., The development of porous nanoarchitectures materials based on clays minerals is a topic of growing interest, being typically addressed to catalysis and adsorption applications [1,2]. Among clay minerals, sepiolite fibrous clay provides larger external surface area as well as the presence of external silanol groups in comparison to typical layered silicates (e.g., smectites), which favours the immobilization of diverse nanoparticles (NP). In this communication it will be introduced several porous ZnO-sepiolite nanostructured materials prepared using sepiolite or organosepiolite as intermediate to control the assembly and aggregation of the metal-oxide nanoparticles. On the one side, ZnO-sepiolite nanoarchitectures were prepared following a process based on the assembly of previously synthesized ZnO NP to sepiolite modified with hexadecyltrimethylammonium ions, both dispersed in 2-propanol medium, to produce an intermediate that after a thermal treatment consolidates the final ZnO/clay nanoarchitecture [3]. On the other side, the ZnO NP were incorporated to a sepiolite previously modified with SiO2 NP produced following a sol-gel methodology reported elsewhere [4]. In this case, it is intended to have a support of ZnO NP with a larger accessible surface area and also appropriate chemical reactivity of the clay surface. Finally, a novel heterostructure has been prepared using directly the sepiolite as substrate on which magnetite NP were in situ growth [5] and then ZnO NP were assembled as in the previously described materials. All types of samples have been characterized by diverse characterization techniques (XRD, FTIR, specific surface area and porosity determinations, TEM, FE-SEM-EDX, SQUID, etc.) and their activity in the photocatalytic degradation of emerging pollutants in water was tested. In this way, solutions of paracetamol, antypirine and ibuprofen drugs were exposed to a lamp that simulates solar light and the variation of their concentration with time of exposure was followed by HPLC. For instance, it has been observed that the ZnO/sepiolite heterostructure exhibits better photoactivity than ZnO/SiO2-sepiolite and ZnO/Fe3O4-sepiolite materials for the degradation of ibuprofen. However, the last material has an important advantage as it presents superparamagnetic afforded by the magnetite NP and it can be easily recovered from the reaction media by applying an external magnetic field, which makes very easy the reusability of the photocatalyst in consecutive cycles of treatment., MINECO (Spain, project MAT2015-71117-R) and CSIC (Spain, COOPA20077).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New biohybrid materials as nanocarriers of nucleic acids, and their biotechnological applications

  • Castro-Smirnov, Fidel Antonio
  • Rodriguez-Hoyos, Oscar Edgar
  • Guzmán-Martínez, Fernando
  • Lopez, Bernard S.
  • Piétrement, Olivier
  • Ayache, Jeanne
  • Cam, Eric le
  • Bertrand, Jean-Rémi
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
This work focused on the synthesis, physicochemical characterization and biotechnological applications of new nanomaterials composed of sepiolite for gene transfer. Biohybrids were obtained of sepiolite nanofibers covered by nucleic acids (DNA and RNA molecules). They were characterized by novel techniques and procedures, identifying that the DNA gets adsorbed onto the surface of sepiolite nanofibers that were previously subjected to disaggregation procedures for a maximum fractionation. Such interaction is mediated by silanol groups evenly spaced on the outer surface of silicate particles, through electrostatic interactions, hydrogen bonds, cation bridges and Van der Waals forces. It was shown that sepiolite can be spontaneously internalized by eukaryotic cells in culture, and the mechanisms mediating such internalization were characterized, both endocytic and non-endocytic. Similarly, it was found that sepiolite nanofibers can be transferred between neighboring cells spontaneously, these particles displaying intrinsic fluorescence that facilitates its detection within the cell as gene transfer vector. The biohybrids were assayed with satisfactory results for the transfer of a plasmid DNA vector into cancer cell lines, and strategies were also established to significantly increase their transfection efficiency. These studies demonstrated for the first time the use of sepiolite nanofibers as a platform for transferring nucleic acids and potentially other types of molecules into mammalian cells, those molecules administered for functional or therapeutic purposes, among other applications. This work granted the Annual Award of the National Academy of Sciences of Cuba for the year 2016., This work was supported by La Ligue Nationale Contre le Cancer, ANR (Agence Nationale de la recherche, ANR-14-CE10-0010-02), AFM-Téléthon and INCa (Institut National du Cancer, 2011-1-RT-01, 2011-1-PLBIO-09, 2013-1-PLBIO-14), the MINECO in Spain (projects MAT2012-31759 and MAT2015-71117-R), and the EU COST Action MP1202. Thanks are due to the French Embassy in Cuba and the Campus France for their contribution in partial financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bionanocomposite foams based on the assembly of starch and alginate with sepiolite fibrous clay

  • Darder, Margarita
  • Santos Matos, Charlene Regina
  • Aranda, Pilar
  • Figueredo Gouveia, Rubia
  • Ruiz-Hitzky, Eduardo
Bionanocomposite foams based on alginate, potato starch and the microfibrous clay mineral sepiolite as reinforcing filler were prepared by lyophilization. Spectroscopic techniques were applied in order to assess the interaction mechanism established between the inorganic fibers and the polysaccharide chains, which is established between the hydroxyl groups in the polysaccharide chains and the silanol groups at the external surface of the sepiolite fibers. The textural properties studied by means of mercury intrusion porosimetry, FE-SEM and X-ray microtomography, revealed a decrease in porosity as the sepiolite content increased. Mechanical properties were also determined for the studied foams, showing an increase in compression moduli from 7.3 MPa in the foam without sepiolite to 29 MPa in foams containing 10% starch, 40% sepiolite and 50% alginate. Horizontal burning tests were carried out for a preliminary evaluation of the role of the inorganic fibers on the fire resistance properties of the bionanocomposite foams, revealing that bionanocomposite foams with sepiolite content >25% behave as auto-extinguishable materials. Post-synthesis cross-linking with CaCl was carried out in some of these samples, leading to an increase in the compression modulus up to 40 MPa for the optimal composition., Financial support from the CICYT (projects MAT2009-09960 & MAT2015-71117-R), the MICINN (project RyC-2007-00381), and the EU COST Action MP1202. C.R.S.M. thanks the AECID for the award of a Master fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the porous silicate HPM-5

  • Jo, Donghui
  • Mayoral, Álvaro
  • Hong, Suk Bong
  • Camblor, Miguel Ángel
HPM-5, a porous aluminosilicate with an intricate and so far unsolved structure, has been synthesized by using 1,2,3-trimethylimidazolium in hydroxide medium in the absence of fluoride anions. It consistently displays an ill-defined XRD pattern with broad and overlapped reflections and contains a large concentration of defects, as evidenced by IR and Si MAS NMR spectroscopy. H MAS NMR spectroscopy confirmed the existence of highly deshielded protons (δ = –11.6 ppm) assigned to hydrogen atoms in relatively strong Si–O–H···O–Si hydrogen bonds (O···O distance ≈ 2.64 Å) The calcined material shows limited microporosity (0.07–0.09 cm g). The results of a high-resolution transmission electron microscopy study suggest HPM-5 may be far more complicated than “standard” layered zeolites and may consist of low-density layers profusely decorated by holes. The resulting lace-like layers may be too unstable to withstand reactions characteristic of more conventional layered materials (both delamination and expansion by silylation); although the derivatives show an increase in the specific surface area, the layers are apparently disassembled and, at most, only ribbons remain., The authors acknowledge financial support from the Spanish Ministry of Science and Competitiveness (Projects MAT2012‐31759 and MAT2015‐71117‐R) and from the National Creative Research Initiative Program (2012R1A3A2048833) through the National Research Foundation of Korea. We also thank A. Valera for technical help (FESEM and EDS). A. M. acknowledges the European Union Seventh Framework Programme under Grant Agreement No. 312483‐ESTEEM2 (Integrated Infrastructure Initiative‐I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sepiolite nanoplatform for the simultaneous assembly of magnetite and zinc oxide nanoparticles as photocatalyst for improving removal of organic pollutants

  • Akkari, Marwa
  • Aranda, Pilar
  • Mayoral, Álvaro
  • García-Hernández, Mar
  • Ben Haj Amara, A.
  • Ruiz-Hitzky, Eduardo
Novel ternary ZnO/FeO-sepiolite nanostructured materials were developed in a two-step procedure based on the incorporation of ZnO nanoparticles on a substrate composed by magnetite nanoparticles previously assembled to the sepiolite fibrous silicate (FeO-sepiolite). The structural and morphological characterization shows that both, ZnO and FeO nanoparticles, were homogeneously dispersed on the surface of sepiolite. Therefore, the resulting material is characterized as a multifunctional nanoplatform simultaneously providing magnetic and photoactive properties. ZnO/FeO-sepiolite materials exhibit superparamagnetic properties at room temperature, which is one of the sought properties in view to facilitate their recovery from the reaction medium after application as heterogeneous catalysts. ZnO/FeO-sepiolite materials were tested as photocatalysts using methylene blue dye in water as model of a pollutant molecule, showing full decolorization after 2 h of UV irradiation. Moreover, the photocatalytic activity of this nanoplataform may be maintained after reuse in several consecutive cycles of treatment. Remarkably, the ZnO/magnetite-sepiolite nanostructured material displays a similar activity as ZnO/sepiolite materials, but shows the additional advantage of easier recovery by means of a magnet which facilitates its reuse., Financial support from CSIC (project COOPA20077), MINECO (projects MAT2012-31759 and MAT2015-71117-R), Spain, as well as technical assistance by Mr. A. Valera, Mr. R. Barrios (ICMM-CSIC) and Dr. L. Pascual (ICP-CSIC) are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conducting macroporous carbon foams derived from microwave-generated caramel/silica gel intermediates

  • Canencia, Flor
  • Darder, Margarita
  • Aranda, Pilar
  • Fernandes, Francisco M.
  • Gouveia, Rubia Figueredo
  • Ruiz-Hitzky, Eduardo
The current work reports the preparation of macroporous carbon/silica foams using sucrose as precursor in the presence of silica gel and water. After a preliminary fast transformation of sucrose into caramel by MW irradiation, the carbon/silica materials are obtained by thermal treatment at 800 °C under nitrogen atmosphere. In contrast to carbon/clay materials prepared by the same synthetic route, the use of microporous silica gel as inorganic support for the chemical transformation of sucrose gives rise to foam-like materials without requiring the addition of blowing agents. The resulting materials are low-density monoliths (0.17 g cm) that show several populations of macropores centered at 150 and in the range of 30–5 µm, as well as mesopores around 5–6 nm. The porosity is close to 97%, as determined from helium pycnometry, which gave a skeletal density value of 6.08 g cm. The resulting foams show electrical conductivity values around 3 mS cm due to the generated graphene-like materials, as corroborated by Raman spectroscopy. A preliminary evaluation of these macroporous materials as adsorbents of aromatic pollutants was carried out using methylene blue (MB) as a model dye. The regeneration of the MB-loaded foams to make possible their application in successive adsorption cycles was assessed by solid–liquid extraction and electrochemical regeneration. In both cases, the treatment produced an increase in the uptake capacity, which could be due to an increment in porosity and specific surface area, from 360 to 440 m g, as determined from mercury porosimetry and N adsorption measurements. In addition, the electrochemical method allowed a partial degradation of the pollutant, as determined by UV–Vis and HPLC–MS. Thus, the carbon/silica materials here developed are promising adsorbents for treatment of polluted effluents., Authors thank the CICYT (Spain, projects MAT2012-31759 and MAT2015-71117-R), the EU COST Action MP1202.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellular uptake pathways of sepiolite nanofibers and DNA transfection improvement

  • Castro-Smirnov, Fidel Antonio
  • Ayache, Jeanne
  • Bertrand, Jean-Rémi
  • Dardillac, Elodie
  • Cam, Eric le
  • Piétrement, Olivier
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
  • Lopez, Bernard S.
Sepiolite is a nanofibrous natural silicate that can be used as a nanocarrier because it can be naturally internalized into mammalian cells, due to its nano-size dimension. Therefore, deciphering the mechanisms of sepiolite cell internalization constitutes a question interesting biotechnology, for the use of sepiolite as nanocarrier, as well as environmental and public health concerns. Though it is low, the perfectly stable and natural intrinsic fluorescence of sepiolite nanofibers allows to follow their fate into cells by specifically sensitive technics. By combining fluorescence microscopy (including confocal analysis), time-lapse video microscopy, fluorescence activated cell sorting and transmission electron microscopy, we show that sepiolite can be spontaneously internalized into mammalian cells through both non-endocytic and endocytic pathways, macropinocytosis being one of the main pathways. Interestingly, exposure of the cells to endocytosis inhibitors, such as chloroquine, two-fold increase the efficiency of sepiolite-mediated gene transfer, in addition to the 100-fold increased resulting from sepiolite sonomechanical treatment. As sepiolite is able to bind various biological molecules, this nanoparticulate silicate could be a good candidate as a nanocarrier for simultaneous vectorization of diverse biological molecules., This work was supported by La Ligue Nationale Contre le Cancer, ANR (Agence Nationale de la Recherche, ANR-14-CE10-0010-02, ANR-16-CE18-0012-02), AFM-Téléthon and INCa (Institut National du Cancer, 2013-1-PLBIO-14), MINECO (projects MAT2012-31759 and MAT2015-71117-R), Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Driving the Crystallization of Zeolites

  • Lu, Peng
  • Villaescusa, Luis A.
  • Camblor, Miguel Ángel
[EN] The synthesis of zeolites with new structures and/or improved properties heavily relies on trial and error efforts that are not entirely blind, as the large empirical background accumulated for the last 7 decades can be, to some extent, rationalized and purposefully used to make new materials. The so-called structure-directing factors may be combined to promote (or frustrate) the crystallization of a particular structure. This personal account opens with the concept of geoinspiration, as suggested by Prof. Ruiz-Hitzky, and its application to zeolite synthesis. We then provide a concise overview of structure-direction in the synthesis of zeolites and detail examples, both new and from the literature, on how they can be combined to drive the crystallization towards (or away from) structures displaying particular features., Financial support by the Spanish Ministry of Economy and Competitiveness (MAT2015‐71117‐R and AGL2015‐70235‐C2‐R) is acknowledged. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Thanks are also due to Wikimedia Commons and Mr. A. T. Chang for the picture of the hot springs included in the frontispiece.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Flexibility on the Separation of Chiral Isomers in STW-Type Zeolite

  • Bueno-Pérez, Rocío
  • Balestra, Salvador R. G.
  • Camblor, Miguel Ángel
  • Min, Jung Gi
  • Hong, Suk Bong
  • Merkling, Patrick J.
  • Calero, Sofía
[EN] Molecular simulation, through the computation of adsorption isotherms, is a useful predictive tool for the selective capacity of nanoporous materials. Generally, adsorbents are modelled as rigid frameworks, as opposed to allowing for vibrations of the lattice, and this approximation is assumed to have negligible impact on adsorption. In this work, this approach was tested in an especially challenging system by computing the adsorption of the chiral molecules 2-pentanol, 2-methylbutanol and 3-methyl-2-butanol in the all-silica and germanosilicate chiral zeolites STW and studying their lattice vibrations upon adsorption. The analysis of single- and multicomponent adsorption isotherms showed the suitability of STW-type zeolites as molecular sieves for chiral separation processes, which pose a challenging task in the chemical and pharmaceutical industries. Moreover, new experimental adsorption data validate the force field employed. The results reveal that the lattice vibrations of the all-silica framework are sorbate-independent, while those of germanosilicate STW show host–guest coupling modulated by uptake and sorbate type that disrupts the chiral recognition sites. This study indicates that the effects of intrinsic flexibility on the selective capacity of nanoporous materials may range from low to high impact, and some of them could not have been foreseen even after examination of the structural dynamics of an empty framework., This work was supported by the Spanish Ministerio de Economía y Competitividad (CTP2016-80206-P and MAT2015-71117-R) and the National Creative Research Initia-tive Program (2012R1A3A-2048833) through the National Research Foundation of Korea. S. R. G. Balestra thanks the Spanish MINECO for his predoctoral fellowship (BES-2014-067825).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stepped Propane Adsorption in Pure-Silica ITW Zeolite

  • Min, Jung Gi
  • Luna-Triguero, Azahara
  • Byun, Youngchul
  • Balestra, Salvador R. G.
  • Vicent-Luna, Jose Manuel
  • Calero, Sofía
  • Hong, Suk Bong
  • Camblor, Miguel Ángel
[EN] Gas adsorption over zeolites is at the basis of important applications of this class of microporous crystalline solids, notably as separation media and catalysts, but it may also be complex and not straightforward to understand. Here we report that for temperature below 323 K propane adsorption on the small-pore pure-silica zeolite ITW exhibits a clear step (pseudosaturation). This is absent in the case of propene and the other small linear alkanes. An intermediate plateau, clearly observed in the 293 K isotherm, always occurs when one molecule of propane is loaded in every other cage, i.e., at half-saturation. The simulation results show a swelling of the ITW structure upon propane adsorption. The strong dependence of available pore volume on the adsorbate loading level implies that adsorption cannot occur on the void structure while saturation can only be reached on highly loaded structures. To account for this unprecedented adsorption phenomenon, we propose the term >guest-modulated effect>., This work was supported by Spanish Ministerio de Economía y Competitividad (CTQ2016-80206-P, MAT2015-71117-R) and the National Creative Research Initiative Program (2012R1A3A-2048833) through the National Research Foundation of Korea. The authors also thank Dr. R. Ruiz-Salvador for guidance with optimization techniques for flexible zeolites with guest molecules. S.R.G.B. thanks the “Ministerio de Economía y Competitividad” for his predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 3D Large-Pore Germanosilicate Zeolites Using Imidazolium-Based Long Dications

  • Lu, Peng
  • Mayoral, Álvaro
  • Gómez-Hortigüela Sainz, Luis
  • Zhang, Yaping
  • Camblor, Miguel Ángel
[EN] Introduction of small molar fractions of Ge in a synthesis system otherwise yielding the monodimensional large-pore zeolite MTW produced three 3D large-pore materials as the Ge fraction increased: *BEA, HPM-8, and HPM-7. HPM-8 is a zeolite consisting of an intergrowth of polymorphs D and E of the zeolite Beta family with a large predominance (>80%) of polymorph D, according to DIFFaX simulations and high-resolution scanning transmission electron microscopy analysis. After calcination, HPM-8 becomes remarkably stable upon contact with ambient air. HPM-7 likely possesses the POS topology, which is related to polymorph C. The density of double 4-ring (D4R) units in the crystallized materials increases from *BEA to HPM-8 to HPM-7, that is, as the Ge fraction increases. Interestingly, molecular mechanics show that in both HPM-7 and HPM-8, the organic dications prefer to site with their imidazolium rings in close contact with the D4R units as a consequence of a stronger confinement in this position. Indeed, the structure-directing role of these long dications can be explained as a consequence of the appropriate distance match between adjacent D4R units in both zeolite frameworks (and hence the negative charges associated with the occluded fluoride) and the imidazolium rings of these organic dications (and hence the positive charges), which is dictated by the length of the alkyl spacers, thus driving the crystallization pathway toward these particular germanosilicate zeolites., Ministry of Science, Innovation and Universities (projects MAT2016-77496-R and MAT2015-71117-R) and the National Natural Science Foundation of China (NSFC-21850410448, NSFC- 21835002). P.L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. A.M. and Y.Z. acknowledge The Centre for High-resolution Electron Microscopy (CℏEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. The authors are also indebted to L.A. Villaescusa (Valencia) for helpful comments and suggestions. Centro Técnico Informático-CSIC is acknowledged for running the calculations, and Biovia for providing the computational software.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of pure silica MFI zeolites using imidazolium-based long dications. A comparative study of structure-directing effects derived from a further spacer length increase

  • Lu, Peng
  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
[EN] Length-dependent structure direction of linear methylimidazolium-based dications towards MFI zeolite, previously known only for the tetramethylene spacer, has also been found for octamethylene and decamethylene spacers. This works only under highly concentrated conditions, whereas dilution always tends to favor TON, a default structure that is the only zeolite obtained with the other reported dications (with tri-, penta-, and hexamethylene spacers). The locations and conformations of the dications have been studied by molecular mechanics simulations. As longer dications introduce lower density of positive charges in the zeolite, the density of connectivity defects also decreases. Finally, these long dications cannot easily place each charged imidazolium ring in the two possible orientations (either parallel or perpendicular to 4MR close to F sites) found for the tetramethylene case. Hence, although the three MFI materials display two F NMR resonances at similar chemical shifts, their relative intensities strongly vary as a function of the spacer length., Financial support provided by the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71117-R and MAT2016-77496-R) is acknowledged. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Centro Técnico Informático-CSIC is acknowledged for running the calculations, and Biovia is acknowledged for providing the computational software.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of Pure Silica MWW Zeolite in Fluoride Medium by Using an Imidazolium-Based Long Dication

  • Lu, Peng
  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
[EN] As the spacer length in 1,2-dimethylimidazolium-based dications increases beyond a specific point (six methylene units), they fail in structure-directing towards STW zeolites in any synthetic conditions. These dications can instead produce, under fluoride concentrated conditions, either *BEA [in the case of the eight-methylene-unit structure-directing agent (SDA)] or MWW (ten methylene units) zeolites. For any length of the dication, the default zeolite (MTW) is a relatively dense zeolite containing a unidimensional channel, whereas the zeolite demanding most specificity (STW, *BEA or MWW) is more porous, affording a larger concentration of the dication to be occluded. This work provides the first reported fluoride synthesis of pure silica MWW zeolites. Charge balance of the organic dications in this zeolite was achieved by combining “structural” silanolates, regular “connectivity defects” and occluded fluoride. Molecular mechanics calculations showed a perfect fit of the decamethylenebis(dimethylimidazolium) dication in the sinusoidal intralayer pore system of MWW. The calculations showed also that the dication is able to stabilize the interlayer space without disturbing the hydrogen-bonding system that holds the layers together in the as-made material. The F magic-angle spinning (MAS) NMR presented two distinct resonances at −71 and −83 ppm, which, on the basis of DFT calculations, we tentatively assigned to fluoride occluded in [46] and [456] cages of the MWW structure, respectively. The same DFT study determines a different chemical shift of one methyl C nuclear magnetic resonance according to the imidazolium ring residing in the sinusoidal channels or in the large cup cavities, thus explaining an experimentally observed splitting of that resonance., Financial support provided by the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71117-R and MAT2016-77496-R) is acknowledged. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Centro Técnico Informático-CSIC is acknowledged for running the calculations, and Biovia is acknowledged for providing the computational software.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zein-layered hydroxide biohybrids: strategies of synthesis and characterization

  • Alcântara, Ana C. S.
  • Darder, Margarita
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
© 2020 by the authors., This work constitutes a basic study about the first exploration on the preparation of biohybrids based on the corn protein zein and layered metal hydroxides, such as layered double hydroxides (LDH) and layered single hydroxides (LSHs). For this purpose, MgAl layered double hydroxide and the Co2(OH)3 layered single hydroxide were selected as hosts, and various synthetic approaches were explored to achieve the formation of the zein-layered hydroxide biohybrids, profiting from the presence of negatively charged groups in zein in basic medium. Zein-based layered hydroxide biohybrids were characterized by diverse physicochemical techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis/differential thermal analysis (TG/DTA), solid state 13C cross-polarization magical angle spinning nuclear magnetic resonance (CP-MAS NMR), field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), etc., which suggest that the different synthesis procedures employed and the anion located in the interlayer region of the inorganic host material seem to have a strong influence on the final features of the biohybrids, resulting in mixed, single intercalated, or highly exfoliated intercalated phases. Thus, the resulting biohybrids based on zein and layered hydroxides could have interest in applications in biomedicine, biosensing, materials for electronic devices, catalysis, and photocatalysis., This research was funded by the MAT2012-31759 (CICYT, Spain) and MAT2015-71117-R (MINECO, Spain and FEDER, EU) projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoactive nanoarchitectures based on clays incorporating TiO2 and ZnO nanoparticles

  • Ruiz-Hitzky, Eduardo
  • Aranda, Pilar
  • Akkari, Marwa
  • Khaorapapong, Nithima
  • Ogawa, Makoto
[EN] Thought as raw materials clay minerals are often disregarded in the development of advanced materials. However, clays of natural and synthetic origin constitute excellent platforms for developing nanostructured functional materials for numerous applications. They can be easily assembled to diverse types of nanoparticles provided with magnetic, electronic, photoactive or bioactive properties, allowing to overcome drawbacks of other types of substrates in the design of functional nanoarchitectures. Within this scope, clays can be of special relevance in the production of photoactive materials as they offer an advantageous way for the stabilization and immobilization of diverse metal-oxide nanoparticles. The controlled assembly under mild conditions of titanium dioxide and zinc oxide nanoparticles with clay minerals to give diverse clay-semiconductor nanoarchitectures are summarized and critically discussed in this review article. The possibility to use clay minerals as starting components showing different morphologies, such as layered, fibrous, or tubular morphologies, to immobilize these types of nanoparticles mainly plays a role in i) the control of their size and size distribution on the solid surface, ii) the mitigation or suppression of the nanoparticle aggregation, and iii) the hierarchical design for selectivity enhancements in the catalytic transformation and for improved overall reaction efficiency. This article tries also to present new steps towards more sophisticated but efficient and highly selective functional nanoarchitectures incorporating photosensitizer elements for tuning the semiconductor-clay photoactivity., Authors thank the MINECO (Spain, project MAT2015-71117-R) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Layered double hydroxide/sepiolite hybrid nanoarchitectures for the controlled release of herbicides

  • Rebitski, Ediana P.
  • Darder, Margarita
  • Aranda, Pilar
This article is part of the thematic issue "Nanoarchitectonics: bottom-up creation of functional materials and systems"., [EN] In this work, organic–inorganic hybrid nanoarchitectures were prepared in a single coprecipitation step by assembling magnesium–aluminum layered double hydroxides (MgAl-LDH) and a sepiolite fibrous clay, with the simultaneous encapsulation of the herbicide 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the MgAl-LDH retains its ion exchange properties. The synthetic procedure was advantageous in comparison to the incorporation of MCPA by ion exchange after the formation of the LDH/sepiolite nanoarchitecture in a previous step, as it was less time consuming and gave rise to a higher loading of MCPA. The resulting MCPA-LDH/sepiolite nanoarchitectures were characterized by various physicochemical techniques (XRD, FTIR and 29Si NMR spectroscopies, CHN analysis and SEM) that revealed interactions of LDH with the sepiolite fibers through the silanol groups present on the outer surface of sepiolite, together with the intercalation of MCPA in the LDH confirmed by the increase in the basal spacing from 0.77 nm for the pristine LDH to 2.32 nm for the prepared materials. The amount of herbicide incorporated in the hybrid nanoarchitectures prepared by the single-step coprecipitation method surpassed the CEC of LDH (ca. 330 mEq/100 g), with values reaching 445 mEq/100 g LDH for certain compositions. This suggests a synergy between the inorganic solids that allows the nanoarchitecture to exhibit better adsorption properties than the separate components. Additionally, in the release assays, the herbicide incorporated in the hybrid nanoarchitectures could be completely released, which confirms its suitability for agricultural applications. In order to achieve a more controlled release of the herbicide and to act for several days on the surface of the soil, the hybrid nanoarchitectures were encapsulated in a biopolymer matrix of alginate/zein and shaped into spheres. In in vitro tests carried out in bidistilled water, a continuous release of MCPA from the bionanocomposite beads was achieved for more than a week, while the non-encapsulated materials released the 100% of MCPA in 48 h. Besides, the encapsulation may allow for better handling and transport of the herbicide., This work was supported by the MINECO (Spain, project MAT2015-71117-R) and CNPq (Brazil, fellowship 204360/ 2014-5)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

  • Dico, Giulia Lo
  • Wicklein, Bernd
  • Lisuzzo, Lorenzo
  • Lazzara, Giuseppe
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
[EN] Based on the unique ability of defibrillated sepiolite (SEP) to form stable and homogeneous colloidal dispersions of diverse types of nanoparticles in aqueous media under ultrasonication, multicomponent conductive nanoarchitectured materials integrating halloysite nanotubes (HNTs), graphene nanoplatelets (GNPs) and chitosan (CHI) have been developed. The resulting nanohybrid suspensions could be easily formed into films or foams, where each individual component plays a critical role in the biocomposite: HNTs act as nanocontainers for bioactive species, GNPs provide electrical conductivity (enhanced by doping with MWCNTs) and, the CHI polymer matrix introduces mechanical and membrane properties that are of key significance for the development of electrochemical devices. The resulting characteristics allow for a possible application of these active elements as integrated multicomponent materials for advanced electrochemical devices such as biosensors and enzymatic biofuel cells. This strategy can be regarded as an >a la carte> menu, where the selection of the nanocomponents exhibiting different properties will determine a functional set of predetermined utility with SEP maintaining stable colloidal dispersions of different nanoparticles and polymers in water., The authors thank the MINECO (project MAT2015-71117-R) for financial support. GLD and LL acknowledge the University of Palermo for the “UOB21 Borse di studio finalizzate alla ricerca” grants. BW thanks the MINECO for an IJCI contract (IJCI-2015-23886). The authors also thank Dr. M. Darder, Dr. M. L. Ferrer, and Dr. N. López-Salas for fruitful discussions on bioelectrocatalysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical and experimental investigation on the intercalation of metformin into layered clay minerals

  • Rebitski, Ediana P.
  • Darder, Margarita
  • Sainz-Díaz, C. Ignacio
  • Carraro, Rafaelle
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
This work introduces a comparative study on the use of two layered clays, a natural Wyoming montmorillonite (commercialized as Cloisite®Na; Mt) and a synthetic hectorite (commercialized as Laponite® XLG; Lap), to encapsulate metformin (MF), which is the most widely used oral drug for the treatment of type II diabetes. The aim was the evaluation of the suitability of the synthetic Lap clay as substrate for the controlled release of MF in comparison to the montmorillonite clay previously studied, in view to dispose of a convenient and well-regulated clay-based component for pharmaceutical formulation production. The combination of molecular modeling and experimental characterization techniques, such as FTIR, XRD, CHN chemical analysis and EDX, allowed us to study the adsorption process and the final molecular arrangement of MF in the interlayer space of the two silicates. The intercalation of MF in both clays follows an ion-exchange mechanism that leads to a basal spacing increase of 0.36 nm and 0.40 nm for the Lap-MF and Mt-MF systems, respectively, and the intercalated amount of MF matches the cation exchange capacity of each clay. Calculations at molecular level showed thermodynamically favorable systems produced by cation exchange reaction, where the MF species form a monolayer in the interlayer of both clays. In view to the application of these materials as delivery systems of MF, the release of the drug from Lap-MF and Mt-MF intercalation compounds was evaluated in pH conditions that simulate those of the gastrointestinal tract. Interestingly, Lap-MF allows a complete release of the loaded drug, guaranteeing the possibility of reaching an efficient drug delivery system. However, the large MF release in acid medium in both systems makes necessary a further encapsulation of the intercalation compound in a protective polymer matrix to increase the delivery in the intestine. Promising results were obtained using pectin as encapsulating matrix, leading to a gradual release of MF in the simulated gastrointestinal tract conditions., This work was supported by the MINECO (Spain) and FEDER (EU) funds (projects MAT2015-71117-R, and FIS2016-77692-C2-2-P), Andalusian RNM1897 grant and the CNPq (Brazil) predoctoral fellowship 204360/2014-5. Ediana Paula Rebitski also acknowledges the reception of the Martin Vivaldi award granted by the Spanish Clay Society.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of a germanosilicate zeolite HPM-12 using a short imidazolium-based dication: Structure-direction by charge-to-charge distance matching

  • Lu, Peng
  • Gómez-Hortigüela Sainz, Luis
  • Gao, Yi
  • Camblor, Miguel Ángel
[EN] A short imidazolium based dication, with only three methylene units in the spacer linker, selectively directs the crystallization of zeolite HPM-12 (?UOE) as long as there is enough germanium present in the synthesis gel. The integrity of the dication is proved by dissolution of the zeolite and H and C NMR spectroscopy, where significant effects of organic dication concentration and the presence and concentration of HF need to be taken into account. For the as-made HPM-12 zeolite, a large shift of 9 ppm of one resonance in the C MAS NMR spectrum is due to the particular conformation of the dication imposed by confinement in the zeolite framework, as found by DFT calculations. The structure-directing ability of this kind of dication with varying length of the linker suggests that matching of the distance between positive charges (imidazolium moieties) and negative charges (double four rings in which fluoride resides) plays a crucial role during crystallization., The authors acknowledge financial support from the Spanish Ministerio de Economía y Competitividad, the Spanish Agencia Estatal de Investigación and the EU's Fondo Europeo de Desarrollo Regional under projects MAT2016-77496-R (AEI/FEDER, UE) and MAT2015-71117-R (MINECO/FEDER, UE). We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). P.L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Centro Técnico Informático-CSIC is acknowledged for running the calculations and Biovia for providing the computational software. We also thank L. A. Villaescusa for helpful comments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

IDM-1: A Zeolite with Intersecting Medium and Extra-Large Pores Built as an Expansion of Zeolite MFI

  • Villaescusa, Luis A.
  • Li, Jian
  • Gao, Zihao Rei
  • Sunz, Junliang
  • Camblor, Miguel Ángel
[EN] IDM-1 is a new silica zeolite with an ordered and well-defined framework constructed by alternating pentasil layers and interrupted layers, giving rise to an intersecting system of straight medium pores and undulating extra-large lobed pores. This unique structure was solved by rotation electron diffraction and refined against synchrotron powder X-ray diffraction data. Despite the presence of both Si(OSi)(OH) and Si(OSi)(OH) sites, this new zeolite presents high thermal stability, withstanding calcination even to 1000 °C. The location of defects at specific sites of the structure results in alternating hydrophobic SiO and hydrophilic SiO(OH) intracrystalline regions. This peculiar combination of intersecting medium and extra-large pores and alternating regions of different chemical character may provide this zeolite with unique catalytic properties., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE) and RTI2018-101599-B-C22 (MCUI/AEI/FEDER, UE), the National Natural Science Foundation of China (No. 21871009, 21621061,21527803, 21471009), the Swedish Research Council (VR) and the Knut and Alice Wallenberg Foundation (KAW) L.A.V. also thanks the Generalitat Valenciana (projectPROMETEO/2018/024). Synchrotron experiments were per-formed at beamline BL04 (MSPD) at ALBA Synchrotronwith the collaboration of ALBA staff, and special thanks aredue to A. Manjón for support in collecting the data and forhelpful comments and suggestions
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization of HPM-7, a more ordered than expected germanosilicate zeolite

  • Lu, Peng
  • Zhang, Yaping
  • Mayoral, Álvaro
  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
[EN] HPM-7, a germanosilicate synthesized using long imidazolium-based dications with two different linkers, is shown to possess the POS topology, although disorder may exist but it is very difficult to discern. First, three simple ordered polymorphs (POS-A to POS-C) with very similar energies and structural motifs could give rise to intergrowths that would be very difficult to recognize by powder X-ray diffraction, according to DIFFaX simulations. Another four structures (POS-D to POS-G) can be derived from POS by changing the orientation of two single four rings within the structure, possibly providing an additional source of disorder. While 3D EDT strongly suggests that HPM-7 basically possesses the POS-A (i.e.POS) topology, a detailed HR-STEM study demonstrates the rare existence of some disorder compatible with the polymorph POS-D. The general avoidance of polymorphs with very similar structural motifs and comparable energies points to a rather specific structure-direction by the organic dications used., The authors acknowledge the financial support by the Spanish Ministerio de Economía y Competitividad, the Spanish Agencia Estatal de Investigación and the EU’s Fondo Europeo de Desarrollo Regional under projects MAT2016-77496-R (AEI/FEDER, UE) and MAT2015-71117-R (MINECO/FEDER, UE). We are indebted to the ERSF (Grenoble) and the BM25 Spline staff, particularly to G. Castro and A. Serrano as well as to L. A. Villaescusa (Valencia) for help in collecting the SPXRD data and for helpful comments and suggestions. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. AM acknowledges the Natural National Science Foundation of China (NFSC) through the grants NFSC-21850410448 & NSFC-21835002. AM and YZ acknowledge the Centre for Highresolution Electron Microscopy (CħEM), supported by SPST of ShanghaiTech University under contract no. EM02161943. We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotechnology Responses to COVID‐19

  • Ruiz-Hitzky, Eduardo
  • Darder, Margarita
  • Wicklein, Bernd
  • Ruiz‐Garcia, Cristina
  • Martín-Sampedro, Raquel
  • Del Real Soldevilla, Gustavo
  • Aranda, Pilar
Researchers, engineers, and medical doctors are made aware of the severity of the COVID‐19 infection and act quickly against the coronavirus SARS‐CoV‐2 using a large variety of tools. In this review, a panoply of nanoscience and nanotechnology approaches show how these disciplines can help the medical, technical, and scientific communities to fight the pandemic, highlighting the development of nanomaterials for detection, sanitation, therapies, and vaccines. SARS‐CoV‐2, which can be regarded as a functional core–shell nanoparticle (NP), can interact with diverse materials in its vicinity and remains attached for variable times while preserving its bioactivity. These studies are critical for the appropriate use of controlled disinfection systems. Other nanotechnological approaches are also decisive for the development of improved novel testing and diagnosis kits of coronavirus that are urgently required. Therapeutics are based on nanotechnology strategies as well and focus on antiviral drug design and on new nanoarchitectured vaccines. A brief overview on patented work is presented that emphasizes nanotechnology applied to coronaviruses. Finally, some comments are made on patents of the initial technological responses to COVID‐19 that have already been put in practice., The authors gratefully acknowledge the financial support from the MINECO (Spain) and FEDER (EU) funds (project MAT2015‐71117‐R) as well as NIAID centers of Excellence for Influenza Research and Surveillance (contract no HHSN272201400008C). R.M.‐S. acknowledges the MINECO (Spain) for a “Juan de la Cierva‐Incorporación” contract (IJCI‐2016‐28403)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional biohybrid materials based on halloysite, sepiolite and cellulose nanofibers for health applications

  • Lisuzzo, Lorenzo
  • Wicklein, Bernd
  • Lo Dico, Giulia
  • Lazzara, Giuseppe
  • Del Real Soldevilla, Gustavo
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Biohybrid materials were prepared by co-assembling the three following components: nanotubular halloysite, microfibrous sepiolite, and cellulose nanofibers dispersed in water, in order to exploit the most salient features of each individual component and to render homogeneous, flexible, yet strong films. Indeed, the incorporation of halloysite improves the mechanical performance of the resulting hybrid nanopapers and the assembly of the three components modifies the surface features concerning wetting properties compared to pristine materials, so that the main characteristics of the resulting materials become tunable with regard to certain properties. Owing to their hierarchical porosity together with their diverse surface characteristics, these hybrids can be used in diverse biomedical/pharmaceutical applications. Herein, for instance, loading with two model drugs, salicylic acid and ibuprofen, allows controlled and sustained release as deduced from antimicrobial assays, opening a versatile path for developing other related organic-inorganic materials of potential interest in diverse application fields., The authors thank the MINECO (Spain) and FEDER (EU) for financial support (project MAT2015-71117-R). LL and GDL acknowledge the University of Palermo for the “UOB21 Borse di studio finalizzate alla ricerca” grants. BW thanks the MINECO for the IJCI contract (IJCI-2015-23886). We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure–direction towards the new large pore zeolite NUD-3

  • Chen, Fei-Jian
  • Gao, Zihao Rei
  • Li, Jian
  • Gómez-Hortigüela Sainz, Luis
  • Lin, Cong
  • Xu, Le
  • Du, Hong-Bin
  • Márquez Álvarez, Carlos
  • Sun, Junliang
  • Camblor, Miguel Ángel
[EN] The new zeolite NUD-3 possesses a three-dimensional system of large pore channels that is topologically identical to those of ITQ-21 and PKU- 14. However, the three zeolites have distinctly different frameworks: a particular single 4-membered ring inside the denser portion of the zeolite is missing in PKU-14, disordered in ITQ-21 and fully ordered in NUD-3. We document these differences and use molecular simulations to unravel the mechanismbywhich a particular structure directing agent dication, 1,10-(1,2-phenylenebis(methylene))bis(3-methylimidazolium), is able to orient this inner ring., Spanish Ministry of Science Innovation and Universities (MAT2015-71117-R, PID2019-105479RB-I00 and PID2019-107968RB-I00 projects, AEI, Spain and FEDER, EU), the National Natural Science Foundation of China (No. 22071099, 21673115, 21527803, 21871009, and 21601004), top talent cultivation program of Anhui Educational Committee (gxgwfx2018051), and the Swedish Research Council (VR) and the Knut and Alice Wallenberg Foundation (KAW). Synchrotron experiments were performed at beamline BL04 (MSPD) at ALBA Synchrotron with the collaboration of ALBA staff, and special thanks are given to A. Manjo´n for support in collecting the data and for helpful comments and suggestions. Z. R. G. specially thanks Yingxia Wang of Peking University for her kind suggestions and help with this paper. Centro Te´cnico Informa´tico- CSIC is acknowledged for running the calculations, and BIOVIA for providing the computational software. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

HPM-14, a new germanosilicate zeolite with Interconnected extra-large pores plus odd-membered and small pores

  • Gao, Zihao Rei
  • Li, Jian
  • Lin, Cong
  • Mayoral, Álvaro
  • Sun, Junliang
  • Camblor, Miguel Ángel
HPM-14 is a new extra-large pore zeolite synthesized using imidazolium-based organic structuredirecting agents, fluoride anions and germanium and silicon as tetrahedral components of the framework. Due to the presence of stacking disorder, the structure elucidation of HPM-14 was challenging, and different techniques were necessary to clarify the details of the structure and to understand the nature of the disorder. The structure has been solved by three-dimensional electron diffraction technique (3D ED) and consists of an intergrowth of two polymorphs possessing a three-dimensional channel system, including an extra-large pore opened through windows made up of sixteen tetrahedral atoms (16-membered ring, 16MR) as well as two additional sets of oddmembered (9MR) and small (8MR) pores. The intergrowth has been studied by scanning transmission electron microscopy (Cs-STEM) and powder X-ray diffraction simulations (DIFFaX), which show a large predominance of the monoclinic polymorph A., The authors acknowledge financial support by the Spanish Ministry of Science, Innovation and Universities (MAT2015-71117-R and PID2019-105479RB-I00 projects, AEI, Spain and FEDER, EU), the National Natural Science Foundation of China (No. 21871009, 21621061, 21527803, 21471009, NFSC-21850410448, NSFC- 21835002), the Swedish Research Council (VR) and the Knut and Alice Wallenberg Foundation (KAW), and the Centre for High-resolution Electron Microscopy (ChEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. A.M. also acknowledges funding by the Spanish Ministry of Science, Innovation and Universities through the Ramon y Cajal Program (RYC2018-024561-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sandwich-type zeolite intergrowths with MFI and the novel extra-large pore IDM-1 as ordered end-members

  • Villaescusa, Luis A.
  • Li, Jian
  • Mayoral, Álvaro
  • Gao, Zihao Rei
  • Camblor, Miguel Ángel
Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected highresolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE), PID2019-105479RB-I00 and RTI2018-101599-B-C22 (MCUI/AEI/FEDER, UE), the Swedish Research Council (VR), and the Knut and Alice Wallenberg Foundation (KAW). L.A.V. also thanks the Generalitat Valenciana (project PROMETEO/2018/024). A.M. acknowledges the Spanish Ministry of Science (RYC2018-024561-I) and the Regional government of Aragon (DGA E13_20R), the National Natural Science Foundation of China (NFSC-21850410448 and NSFC-21835002), and the Centre for High-resolution Electron Microscopy (CℏEM), supported by SPST of ShanghaiTech University under contract No. EM02161943., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of microfibrillated cellulose from fast-growing poplar and olive tree pruning by physical pretreatment

  • Ibarra, David
  • Martín-Sampedro, Raquel
  • Wicklein, Bernd
  • Fillat, Ursula
  • Eugenio, María E.
Centro de Investigación Forestal (CIFOR), Motivated by the negative impact of fossil fuel consumption on the environment, the need arises to produce materials and energy from renewable sources. Cellulose, the main biopolymer on Earth, plays a key role in this context, serving as a platform for the development of biofuels, chemicals and novel materials. Among the latter, micro-and nanocellulose have been receiving increasing attention in the last few years. Their many attractive properties, i.e., thermal stability, high mechanical resistance, barrier properties, lightweight, optical transparency and ease of chemical modification, allow their use in a wide range of applications, such as Paper or polymer reinforcement, Packag-ing, construction, membranes, bioplastics, bioengineering, optics and electronics. In view of the increasing demand for traditional wood pulp (e.g., obtained from eucalypt, birch, pine, spruce) for micro/nanocellulose production, dedicated crops and agricultural residues can be interesting as raw materials for this purpose. This work aims at achieving microfibrillated cellulose production from fast-growing poplar and olive tree pruning using physical pretreatment (PFI refining) before the microfibrillation stage. Both raw materials yielded microfibrillated cellulose with similar properties to that obtained from a commercial industrial eucalypt pulp, producing films with high mechanical properties and low wettability. According to these properties, different applications for cellulose microfibers suspensions and films are discussed., This research was funded by Comunidad de Madrid and MCIU/AEI/FEDER, EU via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. B.W. acknowledges financial support from MINECO (Spain) and FEDER (EU) (project MAT2015-71117-R) and from MICINN (Spain) for a JIN contract (PID2019-107022RJ-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrophobic composite foams based on nanocellulose-sepiolite for oil sorption applications

  • Sanguanwong, Amaret
  • Flood, Adrian E
  • Ogawa, Makoto
  • Martín-Sampedro, Raquel
  • Darder, Margarita
  • Wicklein, Bernd
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Centro de Investigación Forestal (CIFOR), TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl)-oxidized cellulose nanofibers (CNF) were assembled to fibrous clay sepiolite (SEP) by means of a high shear homogenizer and an ultrasound treatment followed by lyophilization using three different methods: normal freezing, directional freezing, and a sequential combination of both methods. Methyltrimethoxysilane (MTMS) was grafted to the foam surface by the vapor deposition method to introduce hydrophobicity to the resulting materials. Both the SEP addition (for the normal and directional freezing methods) and the refreezing preparation procedure enhanced the compressive strength of the foams, showing compressive moduli in the range from 28 to 103 kPa for foams loaded with 20% w/w sepiolite. Mercury intrusion porosimetry shows that the average pore diameters were in the range of 30-45 µm depending on the freezing method. This large porosity leads to materials with very low apparent density, around 6 mg/cm3, and very high porosity >99.5%. In addition, water contact angle measurement and Fourier-transform infrared spectroscopy (FTIR) were applied to confirm the foam hydrophobicity, which is suitable for use as an oil sorbent. The sorption ability of these composite foams has been tested using olive and motor oils as models of organophilic liquid adsorbates, observing a maximum sorption capacity of 138 and 90 g/g, respectively., This work was supported by Vidyasirimedhi Institute of Science and Technology (VISTEC), and funds (projects: MAT2015-71117-R and PID2019-105479RB-I00) from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU). R. M.-S. acknowledges the MINECO (Spain) for a “Juan de la Cierva-Incorporación” contract (IJCI-2016-28403) and B.W. thanks the AEI for a JIN project (PID2019-107022RJ-I00). Authors thank the Agencia Estatal CSIC (Spain) for supporting the Open Access publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intercalation of metformin into montmorillonite

  • Rebitski, Ediana P.
  • Aranda, Pilar
  • Darder, Margarita
  • Carraro, Rafaelle
  • Ruiz-Hitzky, Eduardo
Metformin hydrochloride is an extensively used antidiabetic drug that according to the results reported here is able to spontaneously intercalate layered silicates like the montmorillonite clay mineral following an ion-exchange mechanism. The adsorption isotherm from water solutions shows a great affinity of metformin towards the clay mineral, which can retain about thrice the exchange capacity of the clay. The adsorbed excess was easily removed by washing with water, leading to an intercalation compound that contains 93 meq of metformin per 100 g of montmorillonite, matching the CEC value of this clay. The intercalated metformin is arranged in the interlayer space as a monolayer of monoprotonated molecules, which remain strongly entrapped within the solid. These new hybrid materials were characterized by elemental chemical analysis, XRD, FTIR, TG-DTA, and NMR. We preliminary evaluated the use of the metformin-montmorillonite intercalation compound as a drug delivery system, determining the liberation kinetics of metformin at diverse pH values that mimic the gastrointestinal tract. Although the release rate was not totally slowed down, the system seems promising in view of further optimization for drug delivery applications., This work was supported by the MINECO (Spain, project MAT2015-71117-R) and CNPq (Brazil, fellowship 204360/ 2014-5).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the properties of nanocellulose-sepiolite hybrid nanopapers by varying the nanocellulose type and clay content

  • Martín-Sampedro, Raquel
  • Eugenio, María E.
  • Ibarra, David
  • Ruiz-Hitzky, Eduardo
  • Aranda, Pilar
  • Darder, Margarita
23 Pág., The development of nanocellulose-clay materials resulted of great relevance, as it opened up the applications of nanocellulose, but it still requires new approaches that could contribute to improve the preparation procedures and the features of this type of biohybrid materials. In this context, nanocellulose-sepiolite (NC-S) biocomposite foams and films have already been successfully tested for some applications. However, the influence of the nanocellulose properties on sepiolite-cellulose interactions, and consequently on the final properties and potential applications of NC-S biohybrid materials, has not been previously studied. To address this knowledge gap, four kinds of nanocelluloses produced from elm biomass (non-chemically pretreated lignocellulose and bleached cellulose nanofibers (LCNFs and CNFs, respectively), TEMPO-oxidized cellulose nanofibers (TOCNFs) and cellulose nanocrystals (CNCs)) were characterized and used to develop NC-S nanopapers. A stronger interaction was found between sepiolite and negatively charged nanocelluloses (TOCNFs and CNCs), improving their thermal stability and mechanical properties by increasing the sepiolite content. Furthermore, the type of nanocellulose and the sepiolite content could be adjusted to tune the flammability, water permeability and mechanical and optical properties of the NC-S nanopapers. Graphical abstract: [Figure not available: see fulltext.], This work was supported by the MCIN/AEI/https://doi.org/10.13039/501100011033 [Spain, project PID2019-105479RB-I00] and by MCIN/AEI/https://doi.org/10.13039/501100011033 and FEDER Una manera de hacer Europa [Spain & EU, projects MAT2015-71117-R and RTI2018-096080-B-C22]; Comunidad de Madrid [Spain, project SUSTEC-CM S2018/EMT-4348]; and MINECO [Spain, grant IJCI-2016-28403]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Synthesis of Carbon-Clay Nanocomposites

  • Barra, Ana
  • Nunes, Cláudia
  • Ruiz-Hitzky, Eduardo
  • Ferreira, Paula
Carbon nanostructures, such as graphene derivatives, have remarkable mechanical properties, electrical conductivity, and high specific surface areas [...], This work was developed within the scope of the project CICECO—Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020, and LA/P/0006/2020, financed by national funds through the FCT/MEC (PIDDAC). A.B. and P.F. are thankful to FCT for grant SFRH/BD/148856/2019 and the Investigator FCT (IF/00300/2015), respectively. C.N. is grateful to Portuguese national funds (OE), through FCT, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. E.R.-H. gratefully acknowledges the financial support from AEI (Spain) and FEDER (EU) funds (projects MAT2015-71117-R and PID2019-105479RB-I00, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing cellulose nanofiber production from olive tree pruning residue

  • Fillat, Ursula
  • Martín-Sampedro, Raquel
  • Ibarra, David
  • Ruiz-Hitzky, Eduardo
  • Valencia, Concepción
  • Sarrión, A.
  • Castro, Elena
  • Eugenio, María E.
  • Wicklein, Bernd
Pruning operation in olive trees generates a large amount of biomass that is normally burned causing severe environmental concern. Therefore, the transformation of this agricultural residue into value-added products is imperative but still remains as a technological challenge. In this study, olive tree pruning (OTP) residue is evaluated for the first time to produce cellulose nanofibers (CNF). The OTP bleached pulp was treated by TEMPO-mediated oxidation and subsequent defibrillation in a microfluidizer. The resulting CNF was characterized and compared to CNF obtained from a commercial bleached eucalyptus kraft pulp using the same chemi-mechanical procedure. CNF from OTP showed higher carboxylate content but lower fibrillation yield and optical transmittance as compared to eucalyptus CNF. Finally, the visco-elastic gel obtained from OTP was stronger than that produced from eucalyptus. Therefore, the properties of CNF from OTP made this nanomaterial suitable for several applications. CNF from OTP showed higher carboxylate content as compared to eucalyptus CNF (1038 vs. 778 μmol/g) but lower fibrillation yield (48% vs. 96%) and optical transmittance. Finally, the visco-elastic gel obtained from OTP was stronger than that produced from eucalyptus. Therefore, the properties of CNF from OTP made this nanomaterial suitable for several applications., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) via Projects CTQ2013-47158-R, RTA2015-00051-00-00, MAT2015-71117-R and Programme PTA2014-09248-I. BW acknowledges an IJCI contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of lignins from Populus alba L. generated as by-products in different transformation processes Kraft pulping, organosolv and acid hydrolysis

  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Fillat, Ursula
  • Eugenio, María E.
  • Ibarra, David
  • Wicklein, Bernd
The complexity and heterogeneity of lignin requires a detailed understanding in order to decide about more efficient lignin valorization approaches. This study deals with the characterization of lignins from Populus alba L. generated as by-products in different transformation processes: kraft pulping, organosolv and dilute acid hydrolysis. In addition to the composition, the chemical and structural features of the different lignins were investigated by Fourier Transform infrared spectroscopy (FTIR), solid-state 13C nuclear magnetic resonance (13C NMR), two-dimensional nuclear magnetic spectrometry (2D NMR), size exclusion chromatography (SEC), and thermal analysis. Organosolv lignin showed noticeably different characteristics compared to kraft and acid hydrolysis lignins; higher molar mass, higher amount of side-chain linkages (mainly aryl-β ether and resinol) together with lower phenolic content. On the contrary, kraft and acid hydrolysis lignins presented an extensive elimination of lateral chains and therefore a higher phenolic content, which suggests a much stronger lignin depolymerization (lower molar mass) during these processes. Moreover, thermal analysis results revealed that the thermal stability of kraft and acid hydrolysis lignins was higher than that of organosolv lignin, especially in the case of acid hydrolysis lignin. According to all these characteristics, several valorization pathways for studied lignin are discussed., The authors wish to thank the MINECO for funding this study via Project MAT2015-71117-R, CTQ2013-47158-R and RTA2015-00051-00-00. BW acknowledges an IJCI contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose Nanofibers from a Dutch Elm Disease-Resistant Ulmus minor Clone

  • Jiménez-López Laura
  • Eugenio, María E.
  • Ibarra, David
  • Darder, Margarita
  • Martín, Juan Antonio
  • Martín-Sampedro, Raquel
21 pág., The potential use of elm wood in lignocellulosic industries has been hindered by the Dutch elm disease (DED) pandemics, which have ravaged European and North American elm groves in the last century. However, the selection of DED-resistant cultivars paves the way for their use as feedstock in lignocellulosic biorefineries. Here, the production of cellulose nanofibers from the resistant Ulmus minor clone Ademuz was evaluated for the first time. Both mechanical (PFI refining) and chemical (TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation) pretreatments were assessed prior to microfluidization, observing not only easier fibrillation but also better optical and barrier properties for elm nanopapers compared to eucalyptus ones (used as reference). Furthermore, mechanically pretreated samples showed higher strength for elm nanopapers. Although lower nanofibrillation yields were obtained by mechanical pretreatment, nanofibers showed higher thermal, mechanical and barrier properties, compared to TEMPO-oxidized nanofibers. Furthermore, lignin-containing elm nanofibers presented the most promising characteristics, with slightly lower transparencies., This research was funded by FEDER (EU) and MINECO (Spain) (project MAT2015-71117-R), by FEDER (EU), AEI (Spain) and MICIU (Spain) (project RTI2018-096080-B-C22)) and by Comunidad de Madrid (Spain) (project SUSTEC-CM-S2018/EMT-4348). MINECO (Spain) also supported this work via contract IJCI-2016-28403., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose-based biomaterials integrated with copper-cystine hybrid structures as catalysts for nitric oxide generation

  • Darder, Margarita
  • Karan, Anik
  • Del Real Soldevilla, Gustavo
  • DeCoster, Mark A.
10 Pág., Bionanocomposite materials were developed from the assembly of polymer-coated copper-cystine high-aspect ratio structures (CuHARS) and cellulose fibers. The coating of the metal-organic materials with polyallylamine hydrochloride (PAH) allows their covalent linkage to TEMPO-oxidized cellulose by means of EDC/NHS. The resulting materials can be processed as films or macroporous foams by solvent casting and lyophilization, respectively. The films show good mechanical behavior with Young's moduli around 1.5 GPa as well as resistance in water, while the obtained foams show an open network of interconnected macropores with average diameters around 130 μm, depending on the concentration of the initial suspension, and compression modulus values around 450 kPa, similar to other reported freeze-dried nanocellulose-based aerogels. Based on these characteristics, the cellulose/PAH-CuHARS composites are promising for potential biomedical applications as implants or wound dressing materials. They have proved to be effective in the decomposition of low molecular weight S-nitrosothiols (RSNOs), similar to those existing in blood, releasing nitric oxide (NO). This effect is attributed to the presence of copper in the crystalline structure of the CuHARS building unit, which can be gradually released in the presence of redox species like ascorbic acid, typically found in blood. The resulting biomaterials can offer the interesting properties associated with NO, like antimicrobial activity as preliminary tests showed here with Escherichia coli and Staphylococcus epidermidis. In the presence of physiological concentration of RSNOs the amount of generated NO (around 360 nM) is not enough to show bactericidal effect on the studied bacteria, but it could provide other properties inherent to NO even at low concentration in the nM range like anti-inflammatory and anti-thrombotic effects. The cytotoxic effect recorded of the films on rat brain endothelial cells (BMVECs) is least significant and proves them to be friendly enough for further biological studies., This work was supported by the project MAT2015-71117-R (MINECO/FEDER, UE) and by NSF grant award #1547693. M. Darder acknowledges the joint sponsorship by the Fulbright Program and the Spanish Ministry of Education (grant PRX16/00153)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Allantoin‑zinc layered simple hydroxide biohybrid as antimicrobial active phase in cellulosic bionanocomposites as potential wound dressings

  • Marugan, Esther
  • Rebitski, Ediana P.
  • Darder, Margarita
  • Balestra, Salvador R. G.
  • Del Real Soldevilla, Gustavo
  • Aranda, Pilar
15 Pág., Cellulosic materials loaded with a novel zinc layered simple hydroxide (LSH) with allantoin in its structure (allant-ZnLSH) have been developed for potential application as wound dressings. The allant-ZnLSH biohybrid was synthesized by slow addition of a zinc chloride solution to an aqueous solution of allantoin, while adding a NaOH solution dropwise to maintain a controlled pH. The recovered precipitate was characterized by XRD, FTIR, chemical analysis, and FE-SEM. The allant-ZnLSH material was further incorporated into biopolymeric matrices such as hydroxypropylmethylcellulose (HPMC), carboxymethylcellulose (CMC) and cellulose nanofibers (CNF), because of their biocompatibility and biodegradability. The resulting films presented suitable mechanical properties, with Young's modulus values ranging between 1.3 and 3.9 GPa, as well as appropriate water vapor transmission rates (WVTR) for application in would healing, around 250–630 g/m2 per day. The bionanocomposite films also showed interesting barrier properties against the passage of UV light, while keeping a certain transparency in the visible range that would allow the healing process to be monitored without removing the dressing. Their antibacterial action was evaluated against E. coli and S. aureus in agar plates, showing only antimicrobial activity against the latter. The goal is to develop materials that can exhibit antimicrobial, and skin regenerative properties provided by the presence of zinc ions and allantoin, respectively., Authors acknowledge financial support from the MCIN/AEI/10.13039/501100011033 (Spain, project PID2019-105479RB-I00) and FEDER (EU) funds (project MAT2015-71117-R). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). EPR acknowledges the CNPq (Brazil) for the fellowship 204360/2014-5. S. R. G. B. was supported by grant POSTDOC_21_00069 funded by Consejería de Universidad, Investigación e Innovación, Junta de Andalucı́a (Spain). We are thankful to C3UPO for the HPC facilities provided. Authors also acknowledge Dr. I Sobrados and Dr. V. Díez for valuable technical assistance and discussion in the NMR study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual-Fiber Approach toward Flexible Multifunctional Hybrid Materials

  • Wicklein, Bernd
  • Diem, Achim M.
  • Knöller, Andrea
  • Cavalcante, Manoella S.
  • Bergström, Lennart
  • Bill, Joachim
  • Burghard, Zaklina
This article is dedicated to Prof. Fritz Aldinger on the occasion of his 75th birthday., [EN] Multifunctional paper-like materials containing metal oxide nanofibers are important for flexible electronics and other redox-based applications, but are often prone to mechanical failure. This work presents the coassembly of VO nanofibers (VNFs) in a dual-fiber approach together with cellulose nanofibers to produce tough (0.26 MJ m), but strong (250 MPa) flexible hybrid materials. Indeed, nanotensile tests reveal a significant increase in toughness (200%) and strength (85%) of the hybrid films as compared to pristine VNF films. The microstructure of the films shows a transition from an anisotropic texture for the single-component films to an isotropic, entangled network in case of the hybrid films, which facilitates effective fracture resistance mechanisms. The flexible hybrid films display high electrical conductivity (0.2 S cm) and elastic properties originating from VO nanofibers with excellent toughness and transparency endowed by the cellulose nanofibers. The self-supported hybrid films show reversible electrochromic behavior without the need for common substrates such as conducting indium tin oxide glass. It is conceivable that these self-supported films can be exploited in the future in smart, flexible optoelectronic devices., German DFG. Grant Number: BU2713/2-1 Spanish MINECO. Grant Number: MAT2015-71117-R, Supporting Information is available from the Wiley Online Library or from the author., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of Nanoparticles on Fibrous Clay Surfaces: Towards Promising Nanoplatforms for Advanced Functional Applications

  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
[EN] This account discusses on diverse general approaches employed for the preparation of heterostructured materials based on the immobilization of metal oxides and other nanoparticles on sepiolite and palygorskite fibrous clay minerals, showing the many opportunities of application offered by the resulting materials. Various examples from our own experience have been selected to show how sepiolite acts as a convenient nanoplatform for immobilization of diverse type of nanoparticles, such as TiO, FeO, Prussian blue, zeolites, layered double hydroxides, carbon nanotubes and graphenes, etc., to produce functional materials for applications in catalysis, environmental remediation, sensing devices, energy production, and others., Financial support from MINECO, Spain (Project MAT2015-71117-R) is grateful acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional Hybrid Nanopaper by Assembling Nanofibers of Cellulose and Sepiolite

  • González del Campo, M. Mar
  • Darder, Margarita
  • Aranda, Pilar
  • Akkari, Marwa
  • Huttel, Yves
  • Mayoral, Álvaro
  • Bettini, Jefferson
  • Ruiz-Hitzky, Eduardo
[EN] Functional heterofibrous hybrid materials are prepared in an integrative approach from aqueous dispersions of nanofibrillated cellulose and sepiolite by applying high shear homogenization and ultrasound irradiation. Both types of nanofibers remain physically cross-linked forming homogeneous and very stable high-viscosity gels that can be shaped as films and considered as “hybrid nanopapers” as well. The presence of sepiolite modifies the surface roughness of the films resulting from the casting process, which can be rendered hydrophobic, as the hydrophilic characteristics of both components resulted modulated. In addition, these fibrous hybrid systems can benefit from the properties provided by the two components, such as mechanical behavior, surface properties, and chemical reactivity. Moreover, further assembly of these hybrid nanopapers to other particulate solids, such as carbon nanotubes, magnetite, or ZnO nanoparticles, results in multifunctional hybrid nanopapers, opening a versatile way for developing other numerous organic–inorganic materials of interest in diverse applications., This work was supported by the MINECO (Spain) projects MAT2012-31759 and MAT2015-71117-R. M.M.G.C. acknowledges the PhD fellowship BES-2013-064677 (MINECO, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Meeting Point of Carbonaceous Materials and Clays: Toward a New Generation of Functional Composites

  • Darder, Margarita
  • Aranda, Pilar
  • Ruiz-García, Cristina
  • Fernandes, Francisco M.
  • Ruiz-Hitzky, Eduardo
[EN] Carbon and clays are worldwide-spread natural resources known and used for centuries by humans. In spite of their differences, both have been combined to produce diverse types of functional materials, from conventional pencil cores to advanced hybrid composites. The presence of highly conductive graphene and/or carbon nanotubes allows for their use in applications ranging from elements of electrochemical devices to additives for polymer nanocomposites, pollution adsorbents, or active catalysts. Both top-down and bottom-up strategies can be applied to conveniently assemble carbon and clay counterparts. Moreover, such synthetic strategies can be tailored to produce adequate nanostructured materials and/or associate other species. This critical review presents the latest advances on this topic, addressing aspects related to the possibility to produce hybrid materials based on their functionalization capacity., Authors acknowledge financial support from the MINECO (Spain) project MAT2015-71117-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the combined addition of ultrasonicated kraft lignin and montmorillonite on hydroxypropyl methylcellulose bionanocomposites

  • Martín-Sampedro, Raquel
  • Aranda, Pilar
  • Del Real Soldevilla, Gustavo
  • Ruiz-Hitzky, Eduardo
  • Darder, Margarita
17 Pág., Although hydroxypropyl methylcellulose (HPMC) has been proposed as renewable substitute for traditional plastic, its barrier and active properties need to be improved. Thus, the combination of an organic residue such as kraft lignin (0-10% w/w) and a natural clay such as montmorillonite (3% w/w) by application of ultrasound can significantly improve HPMC properties. This is most likely due to the close interaction between lignin and montmorillonite, which leads to delamination of the clay and improves its dispersion within the HPMC matrix. Specifically, the addition of kraft lignin to the bionanocomposite films provided them with UV-shielding, antioxidant capacity and antibacterial activity. The incorporation of 3% montmorillonite resulted in reductions of 65.8% and 11.4% in oxygen (OP) and water vapor permeabilities (WVP), respectively. Moreover, a reduction of 43.8% in WVP was achieved when both lignin (1%) and montmorillonite (3%) were incorporated, observing a synergistic effect. Thus, the HPMC bionanocomposite with 1% lignin and 3% montmorillonite, presented good thermal stability and mechanical strength with significantly improved gas barrier permeability, as well as UV-shielding (maintaining a good transparency), antioxidant and antibacterial activities., This work was supported by the MICIN/AEI doi: 10.13039/501100011033 (Spain) [PID2019-105479RB-I00]; MICIU/AEI (Spain) and FEDER (EU) [MAT2015-71117-R]; MINECO (Spain) [contract IJCI-2016-28403]. Dr Cristina Almansa, from the Technical Research Service of University of Alicante, and Dr Maria del Mar López-González, from ICTP-CSIC, are also acknowledged for their contribution and help in TEM and confocal analysis and in oxygen permeability measurements, respectively. Finally, authors gratefully acknowledge the contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting the interaction, exchange of knowledge and collaborations in the field of lignin valorization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na-S batteries

  • Tabuyo-Martínez, Marina
  • Wicklein, Bernd
  • Aranda, Pilar
Rechargeable batteries are a major element in the transition to renewable energie systems, but the current lithium-ion battery technology may face limitations in the future concerning the availability of raw materials and socio-economic insecurities. Sodium-sulfur (Na-S) batteries are a promising alternative energy storage device for small- to large-scale applications driven by more favorable environmental and economic perspectives. However, scientific and technological problems are still hindering a commercial breakthrough of these batteries. This review discusses strategies to remedy some of the current drawbacks such as the polysulfide shuttle effect, catastrophic volume expansion, Na dendrite growth, and slow reaction kinetics by nanostructuring both the sulfur cathode and the Na anode. Moreover, a survey of recent patents on room temperature (RT) Na-S batteries revealed that nanostructured sulfur and sodium electrodes are still in the minority, which suggests that much investigation and innovation is needed until RT Na-S batteries can be commercialized. © 2021 Tabuyo-Martinez et al.; licensee Beilstein-Institut. License and terms: see end of document. All Rights Reserved., Financial support from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU) is acknowledged (MAT2015-71117-R and PID2019-105479RB-I00 projects). BW also thanks the MICINN for a JIN contract (PID2019-107022RJ-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure-property relationships in composites of 8YSZ ceramics and in situ graphitized nanocellulose

  • Hudelja, Polona
  • Schmidt, Rainer
  • Amorín, Harvey
  • Drev, Sandra
  • Iveković, Aljaž
  • Abram, Anže
  • Kocjan, Andraž
  • Wicklein, Bernd
Ceramic matrix composites (CMC) of 8 mol.% yttria-stabilized zirconia (8YSZ) mixed with natural fiber nanocellulose (0.75, 1, 2 wt%) were prepared by spark plasma sintering (SPS). Nanocellulose markedly improved the densification of the 8YSZ ceramic matrix and induced significant grain size refinement. It was demonstrated that in situ graphitization of nanocellulose during the SPS processing resulted in 6 nm thin turbostratic graphite layers homogeneously covering the 8YSZ ceramic grains. The dielectric properties were analyzed by electrical impedance spectroscopy suggesting a low percolation threshold near or below ≈ 1.6 vol% graphite, above which mixed ionic-electronic conduction dominates. The CMCs are stable under reducing conditions (5%H2/Ar atmosphere) at least until 800 °C with a high conductivity of σdc = 0.17 S∙cm−1 even at 900 °C (8YSZ-2%CNF). These features make the 8YSZ-nanocellulose CMCs promising candidates for application in medium- to high-temperature electrochemical devices. © 2022, PH thanks the JECS Trust for funding a mobility stay project in 2020 (Contract 2019231). The Slovenian Research Agency is acknowledged for funding through research program P2-0087. RS acknowledges funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Spanish MINECO (Grant PID2020-118078RB-I00). Financial support from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU) is acknowledged (MAT2015-71117-R). BW thanks the MICINN for a JIN contract (PID2019-107022RJ-I00). HA thanks the MICINN for funding through project MAT2017-88788-R., Supplementary data associated with this article can be found in the online version at doi:10.1016/j.jeurceramsoc.2022.04.041, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural characterization of HPM-7, a more ordered than expected germanosilicate zeolite

  • Lu, Peng
  • Zhang, Yaping
  • Mayoral, Alvaro
  • Gómez-Hortigüela, Luis
  • Camblor, Miguel A.
HPM-7, a germanosilicate synthesized using long imidazolium-based dications with two different linkers, is shown to possess the POS topology, although disorder may exist but it is very difficult to discern. First, three simple ordered polymorphs (POS-A to POS-C) with very similar energies and structural motifs could give rise to intergrowths that would be very difficult to recognize by powder X-ray diffraction, according to DIFFaX simulations. Another four structures (POS-D to POS-G) can be derived from POS by changing the orientation of two single four rings within the structure, possibly providing an additional source of disorder. While 3D EDT strongly suggests that HPM-7 basically possesses the POS-A (i.e. POS) topology, a detailed HR-STEM study demonstrates the rare existence of some disorder compatible with the polymorph POS-D. The general avoidance of polymorphs with very similar structural motifs and comparable energies points to a rather specific structure-direction by the organic dications used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

HPM-14, a New Germanosilicate Zeolite with Interconnected Extra-Large Pores Plus Odd-Membered and Small Pores

  • Gao, Zihao
  • Li, Jian
  • Lin, Cong
  • Mayoral, Alvaro
  • Sun, Junliang
  • Camblor, Miguel
We describe HPM-14, a new extra-large pore zeolite synthesized using imidazolium-based organic structure-directing agents, fluoride anions and germanium and silicon as tetrahedral components of the framework. Due to the presence of stacking disorder, the structure elucidation of HPM-14 was challenging, and different techniques were necessary to clarify the details of the structure and to understand the nature of the disorder. The structure has been solved by three-dimensional electron diffraction technique (3D ED) and consists of an intergrowth of two polymorphs possessing a three-dimensional channel system, including an extra-large pore opened through windows made up of sixteen tetrahedral atoms (16-membered ring, 16MR) as well as two additional sets of odd-membered (9MR) and small (8MR) pores. The intergrowth has been studied by scanning transmission electron microscopy (C s -STEM) and powder X-ray diffraction simulations (DIFFaX), which show a large predominance of the monoclinic polymorph A.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

HPM-14: A New Germanosilicate Zeolite with Interconnected Extra-Large Pores Plus Odd-Membered and Small Pores

  • Gao, Z.R.
  • Li, J.
  • Lin, C.
  • Mayoral, A.
  • Sun, J.L.
  • Camblor, M.A.
HPM-14 is a new extra-large pore zeolite synthesized using imidazolium-based organic structure-directing agents (SDAs), fluoride anions, and germanium and silicon as tetrahedral components of the framework. Owing to the presence of stacking disorder, the structure elucidation of HPM-14 was challenging, and different techniques were necessary to clarify the details of the structure and to understand the nature of the disorder. The structure has been solved by three-dimensional electron-diffraction technique (3D ED) and consists of an intergrowth of two polymorphs possessing a three-dimensional channel system, including an extra-large pore opened through windows made up of sixteen tetrahedral atoms (16-membered ring, 16MR) as well as two additional sets of odd-membered (9MR) and small (8MR) pores. The intergrowth has been studied by scanning transmission electron microscopy (C-s-STEM) and powder X-ray diffraction simulations (DIFFaX), which show a large predominance of the monoclinic polymorph A.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sandwich-type zeolite intergrowths with MFI and the novel extralarge pore IDM-1 as ordered end-members

  • Villaescusa, L. A.
  • Li, Jain.
  • Mayoral, Álvaro
  • Gao, Zihao Rei
  • Camblor, Miguel A.
Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected high-resolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture.