Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 88
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thorium(IV) phosphate-triphosphate: A valuable ceramic material obtained by thermal treatment of a layered ammonium-thorium(IV) phosphate. Kinetic analysis of the transformation

  • Iglesias, Isabel
  • Alfonso, Belén F.
  • Amghouz, Zakariae
  • Trobajo, Camino
  • García, José R.
  • Huidobro, José A.
Morphological and structural characterization of both (NH4)2Th(PO4)2·H2O (1) and Th2(PO4)(P3O10) (2) have been performed by using electron microscopy techniques (SEM, HR-TEM, DF-STEM and SAED), which reveal a morphological transformation from star-shaped particles to irregularly rhombohedral-like aggregates after thermal treatment at 1000 °C. The 1 → 2 thermal conversion is monitored by thermogravimetric analysis and the activation energy has been obtained by using isoconversional methods. A discrete model describing the kinetic process is obtained and so the original data set can be reconstructed and compared with the experimental measures. By using heating rates different from those involved for getting the model, predictions can be also made. The procedure has worked efficiently in recovering the original kinetic parameters in two theoretical simulations., This work is support by Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R and MAT2011-27573-C04-02), Gobierno del Principado de Asturias (GRUPIN14-060)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The ability of a fibrous titanium oxophosphate for nitrogen-adsorption above room temperature

  • García-Glez, Jorge
  • Amghouz, Zakariae
  • Silva, Iván da
  • Ania, Conchi O.
  • Parra, José B.
  • Trobajo, Camino
  • García-Granda, Santiago
TiO(PO)·2HO (1), a three-dimensional titanium oxophosphate, thermally transforms to TiO(PO) (2), a fibrous novel compound. The crystal structure of 2 was solved ab initio using powder X-ray diffraction data (triclinic, P1, a = 5.0843(1) Å, b = 8.6121(2) Å, c = 9.6766(2) Å, α = 74.501(2)°, β = 76.146(2)°, γ = 74.488(3)°, Z = 2). Compound 2, containing both 4- and 6-fold coordinated titanium atoms, shows measurable thermally activated nitrogen-adsorption. To our knowledge, the process described here constitutes the first example of nitrogen-fixation by an inorganic material at above-ambient temperature., This work was financially supported by Spanish MINECO (MAT2013-40950-R, MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN14-060), and FEDER., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Syntheses and crystal structures of two adamantyl-substituted 1,2,4-triazole-5-thione N-Mannich bases

  • Al-Alshaikh, Monirah A.
  • Al-Mutairi, A. A.
  • Ghabbour, Hazem A.
  • El-Emam, Ali A.
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
In the title N-Mannich bases, 3-(adamantan-1-yl)-4-(4-fluoro­phen­yl)-1-[(4-phenyl­piperazin-1-yl)meth­yl]-4,5-di­hydro-1H-1,2,4-triazole-5-thione (C29H34FN5S) (I), and 3-(adamantan-1-yl)-4-(4-fluoro­phen­yl)-1-{[4-(2-meth­oxyphen­yl)piperazin-1-yl]-meth­yl}-4,5-di­hydro-1H-1,2,4-triazole-5-thione (C30H36FN5OS) (II), fluoro­phenyl, adamantane and piperazine moieties are linked to a planar triazole ring. There is an additional phenyl ring on the piperazine ring in (I) and a meth­oxy­phenyl ring in (II). In compound (I), the fluoro­phenyl and phenyl rings are inclined to the triazole ring by 86.55 (13) and 60.52 (12)°, respectively, and the two aryl rings are inclined to one another by 66.37 (13)°. In compound (II), the corresponding dihedral angles are 83.35 (13), 71.38 (15) and 11.97 (16)°, respectively. The crystal structure of (I) shows pairs of C—H...F hydrogen bonds forming inversion dimers, while in the crystal of compound (II), in addition to the C—H...F hydrogen bonds that generate chains parallel to the b axis, there are C—H...π inter­actions present that link the chains to form layers parallel to the ab plane., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO-13-MAT2013–40950-R, MAT2016–78155-C2–1-R and FPI grant BES-2011–046948 to MSMA), Gobierno del Principado de Asturias (GRUPIN14– 060) and FEDER funding, is also gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure, spectroscopic measurement, thermal studies and optical properties of a new hybrid compound of aquapentachloroindoidate(III) complex

  • Lassoued, Mohamed Saber
  • Abdelbaky, Mohammed S. M.
  • Mendoza-Meroño, Rafael
  • Gadri, Abdellatif
  • Ammar, Salah
  • Ben Salah, Abdelhamid
  • García-Granda, Santiago
A new organic-inorganic complex, bis(4-amine pyridinium) aquapentachloroindoidate(III) (C5H7N2)2[InCl5(H2O)], was synthesized and characterized by single crystal and powder X-ray diffraction, Hirshfeld surface, vibrational spectra, thermal analyses (TGA and DTA) and NMR 13C. Compound crystallizes in triclinic P-1 space group (a = 6.8852(3) Å, b = 11.6914(5) Å, c = 11.9603(6) Å, α = 108.812(4)°, β = 102.028(4)°, γ = 92.835(3)°, Z = 2) with alternation of organic and inorganic layers along the a-axis. The crystal packing was governed by the NH⋯Cl and OH⋯Cl hydrogen bonding interaction between the 4-amine pyridinium cations and the octahedral [InCl5(H2O)] anions, and π-π stacking interactions in which they may be effective in the stabilization of the crystal structure. The optical and photoluminescence properties of the compound were investigated in the solid-state at room temperature., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060), FEDER, and Faculty of Sciences in University of Gabes, Tunisia, are acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization and colour of Ni3VxP2−xO8 (0 ≤ x ≤ 2) and Ni2VyP2−yO7 (0 ≤ y ≤ 2) materials

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • García, José R.
  • García-Granda, Santiago
Structural characterization of Ni3VxP2−xO8 (0 ≤ x ≤ 2) and Ni2VyP2−yO7 (0 ≤ y ≤ 2) compositions was made and colour parameters of these materials measured. Ni(II) diphosphate and divanadate crystalline phases are not stables at high temperature. Solid solutions in Ni3P2O8 and Ni3V2O8 are obtained by incorporation of V(V) in Ni orthophosphate and P(V) in Ni orthovanadate structures. Solid solutions with Ni3V2O8 structure are formed in a greater compositional interval than solid solutions with Ni3P2O8 structure. These materials might be used as ceramic pigments because of its thermal and chemical stability. Tan brown colorations were obtained in glazed tiles when the fired compositions were 4% weight enamelled with a commercial glaze., We gratefully acknowledge the financial support given by MINECO, MAT2013-40950-R project, ERDF funding and MAT2016-78155-C2-1-R project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic degradation of 2-(4-methylphenoxy)ethanol over TiO2 spheres

  • Ilkaeva, Marina
  • Krivtsov, Igor V.
  • Díaz, Eva
  • Amghouz, Zakariae
  • Patiño, Yolanda
  • Khainakov, Sergei
  • García, José R.
  • Ordóñez, Salvador
The photocatalytic TiO2-assisted decomposition of 2-(4-methylphenoxy)ethanol (MPET) in aqueous solution has been studied for the first time. The intermediate compounds of MPET photodegradation have been also determined. A toxic p-cresol is formed in significant quantities during the photocatalytic reaction. A solvent-exchange approach for a template-free preparation of spherical TiO2 particles has been described, which is based solely on precipitation of hydrous titania from aqueous titanium peroxo complex by using organic solvents. The proposed method favours the formation of spherical titania particles with a mean size varying from 50 to 260 nm depending on the choice of solvent. The procedure for converting nonporous titania spheres into mesoporous material maintaining the same spherical morphology has been developed. The synthesized TiO2 spheres demonstrate a degree of MPET photo-degradation close to that of the commercial titania Aeroxide P25, besides being successfully recovered and reused for four reaction cycles without loss of photocatalytic activity. The effectiveness of the commercial Aeroxide P25 in MPET photodegradation, on the other hand, suffers 10-time drop during the third reaction cycle, which is attributed to its poor recoverability because the photocatalyst is composed of small particles of 20 nm size., We gratefully acknowledge financial support from the Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, CTQ2011-29272-C04-02), and the Government of the Principality of Asturias (GRUPIN14-060; GRUPIN14-078; and “Severo Ochoa” PhD grantBP-14-029 to M.I.) and FEDER. South Ural State University acknowledges financial support from Ministry of Education and Science of the Russian Federation (grant No 16.2674.2014/K). IK is grateful for the support by Act 211 Government of the Russian Federation, contract № 02.A03.21.0011., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics and mechanistic insights into the acetate-assisted dimerization of terminal alkynes under Ruthenium- and Acid-Promoted (RAP) catalysis

  • Salvio, Riccardo
  • Juliá-Hernández, Francisco
  • Pisciottani, Luca
  • Mendoza-Meroño, Rafael
  • García-Granda, Santiago
  • Bassetti, Mauro
The mechanism of the dimerization of terminal aryl alkynes promoted by [{RuCl(μ-Cl)(η6-p-cymene)}2](1)/AcOH, under cooperative transition metal/Brønsted acid catalysis, has been investigated with regard to (i) the activation of the dinuclear ruthenium complex and (ii) the catalytic formation of the trans-1,4-diaryl-1,3-enyne products, by a detailed kinetic investigation of both processes. Complex 1 is subject to a slow solvolytic process in neat acetic acid or is transformed rapidly in the presence of sodium acetate to form the monomeric ruthenium(II) acetato complex [RuCl(η6-p-cymene)(OAc)]. The latter is the active catalytic species promoting the alkyne dimerization process, via initial π-alkyne coordination and intramolecular C–H abstraction by the acetate ligand, as key steps of the catalytic cycle. The presence of additive acetate salts allows for the reaction to proceed at room temperature with short reaction times and high trans/cis stereoselectivity, thus rendering this catalytic system among the most active and selective procedures for the dimerization of terminal alkynes in a protic medium. The linear coupling of three molecules of phenylacetylene affords an organometallic ruthenium complex featuring a butenynyl ligand which has been characterized by X-ray crystallography., The research was performed under the joint activity IMCDipartimento di Chimica. Projects “Sistemi catalitici innovativi per lo sviluppo di processi sostenibili” (CNR_DCM.AD001.212) and Ateneo−La Sapienza 2016 (RM116154C9CFDE3B) are acknowledged for financial support. F.J.-H. thanks the Fundacion Seneca (03059/PI/05), Region de Murcia (ES), for a predoctoral fellowship at CNR-IMC. S.G.-G. and R.M.-M. acknowledge the financial support provided by the MINECO, Project MAT2013-40950-R, ERDF funding, and Project MAT2016-78155-C2-1-R″., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the structure of CrPO4 on the formation of CrVxP1-xO4 solid solutions and their colour

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • García, José R.
  • García-Granda, Santiago
CrVxP1−xO4 (0 ≤ x ≤ 1) compositions were synthesized via the chemical co-precipitation method. At 600 °C, the detected crystalline phase is monoclinic CrVO4 when x ≥ 0.7. At 800 °C, two isostructural phases with orthorhombic symmetry are detected. At this temperature, β-CrPO4 is present when x ≤ 0.7 and orthorhombic CrVO4 when 0.1 ≤ x ≤ 0.9. The two orthorhombic phases, β-CrPO4 and CrVO4, are stable at 800 and 1000 °C. At 1200 °C, the major crystalline phase is the α-CrPO4 polymorph when x ≤ 0.3. This phase is not present when x ≥ 0.7. The unit cell increase confirms the formation of solid solutions with the α-CrPO4 and β-CrPO4 structure. The CrVxP1−xO4 solid solutions (x < 0.3) with the α-CrPO4 structure can be used as a green ceramic pigment because of their thermal and chemical stability., We gratefully acknowledge the financial support provided by MINECO, Project MAT2013-40950-R, ERDF funding and Project MAT2016-78155-C2-1-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diphosphanegermylene to nickel, palladium, and platinum complexes containing germyl PGeP pincer ligands

  • Álvarez-Rodríguez, Lucía
  • Brugos, Javier
  • Cabeza, Javier A.
  • García-Álvarez, Pablo
  • Pérez-Carreño, Enrique
The PGeP pincer-type germylene Ge(NCH2 PtBu2 )C6 H4 (1) has been used to prepare a family of group 10 metal complexes, namely, [MCl{κ3 P,Ge,P-GeCl(NCH2 PtBu2 )2 C6 H4 }] (M=Ni (2Ni ), Pd (2Pd ), Pt (2Pt )), featuring a chloridogermyl PGeP pincer ligand and a Cl-Ge-M-Cl bond sequence. Their reactivity is not initially centered on the metal atom but on their Ge atom. Complexes 2Ni and 2Pd easily led to the hydrolyzed products [Ni2 Cl2 {μ-(κ3 P,Ge,P-Ge(NCH2 PtBu2 )2 C6 H4 )2 O}], which features a Cl-Ni-Ge-O-Ge-Ni-Cl bond sequence, and [PdCl{κ3 P,Ge,P-Ge(OH)(NCH2 PtBu2 )2 C6 H4 }], which contains a hydroxidogermyl PGeP pincer ligand (2Pt is reluctant to undergo hydrolysis). Simple chloride exchange reactions led to the methoxidogermyl, methylgermyl, and phenylgermyl derivatives [MCl{κ3 P,Ge,P-GeR(NCH2 PtBu2 )2 C6 H4 }] (M=Pd, Pt; R=OMe, Me, Ph). Whereas the palladium complexes [PdCl{κ3 P,Ge,P-GeR(NCH2 PtBu2 )2 C6 H4 }] (R=Me, Ph) reacted with more MeLi or PhLi to give palladium black and GeR2 (NCH2 PtBu2 )2 C6 H4 (R=Me, Ph), similar reactions with the analogous platinum complexes afforded the transmetalation derivatives [PtR{κ3 P,Ge,P-GeR(NCH2 PtBu2 )2 C6 H4 }] (R=Me, Ph). The short length of the CH2 PtBu2 arms of the PGeP pincer ligands forces the metal atoms of all these complexes to be in a very distorted square-planar ligand environment. The reactivity results have been rationalized with theoretical calculations., This work has been supported by research grants obtained from Ministerio de Economía y Competitividad (CTQ2016-75218-P, CTQ2016-81797-REDC, MAT2016-78155-C2-1-R, and RYC2012-10491) and Gobierno del Principado de Asturias (GRUPIN14-009 and GRUPIN14-060)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nitride assisted chemoselective C-H bond photo-oxidation of alkylphenolethoxylates in water medium

  • Ilkaeva, Marina
  • Krivtsov, Igor V.
  • Bartashevich, Ekaterina V.
  • Khainakov, Sergei
  • García, José R.
  • Díaz, Eva
  • Ordóñez, Salvador
The unprecedented ability of g-C3N4 to chemoselectively photo-oxidise the methyl group of 2-(4-methylphenoxy)ethanol instead of the easily oxidised oxyethanol fragment has been demonstrated. When g-C3N4 is treated with H2O2, its selectivity enhances due to the blocking of surface sites responsible for the adsorption and the subsequent oxidation of the oxyethanol substituent., This work was financially supported by Spanish MINECO (MAT2013-40950-R, CTQ2014-52956-C3-1-R and MAT2016-78155-C2-1-R), Gobierno del Principado de Asturias (GRUPIN14-060, GRUPIN14-078), Severo Ochoa PhD grant BP-14-029 to MI, and FEDER. EB is grateful to the Ministry of Education and Science of the Russian Federation (grant 4.1157.2017/PP) for financing the computational studies. IK is thankful to the Ministry of Education and Science of the Russian Federation (grant no. 4.9722.2017/8.9), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A coordination polymer of mercury(II) formed by triazole-based and chloride linkers

  • Ghorban Hosseini, Seyed
  • Moeini, Keyvan
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
In this work, a coordination polymer formed from 4,5-diamino-3-methyl-4H-1,2,4-triazol-1-ium chloride (DAMT·HCl) and HgCl2 formulated as [Hg5(μ-DAMT)2(μ-Cl)6(μ3-Cl)2Cl2]n has been prepared and characterized by elemental analysis, FT-IR, 1H NMR spectroscopy, and single-crystal X-ray diffraction. X-ray analysis of the complex revealed an organic-inorganic hybrid coordination polymer containing three different mercury atoms with coordination numbers of 4 (HgN(μ-Cl)2(μ3-Cl)), 5 (Hg(μ-Cl)3(μ3-Cl)Cl), and 6 (HgN2(μ-Cl)2(μ3-Cl)2) and seesaw, octahedral, and square pyramidal geometries, respectively. The polymeric chains are extended to a three-dimensional (3D) array by C–H···Cl and N–H···Cl interactions. In addition to these hydrogen bonds, there are Hg···Cl interactions with the mercury atoms with coordination numbers 4 and 5 to complete their pseudo-square planar and -octahedral geometries, respectively., We acknowledge the financial support from Spanish Ministerio de Economía y Competitividad (MINECO-13-MAT2013-40950-R, MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSMA), Gobierno del Principado de Asturias (GRUPIN14-060), and FEDER funding., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure and characterization of a novel layered copper-lithium phosphonate with antiferromagnetic intrachain Cu(II)···Cu(II) interactions

  • Abdelbaky, Mohammed S. M.
  • Amghouz, Zakariae
  • Martínez-Blanco, David
  • García-Granda, Santiago
  • García, José R.
Novel metal phosphonate [CuLi(PPA)] [H3PPA=3-phosphonopropionic acid] was synthesized hydrothermally and characterized by single-crystal X-ray diffraction, powder X-ray diffraction, scanning electron microscopy, infrared spectroscopy, and thermogravimetric analysis. It crystallizes in the space group C2/c, with cell parameters a=21.617(2) Å, b=4.9269(2) Å, c=14.342(1) Å, β=132.3(2)°, and Z=8. Its framework is built up from a main trimer, acting as a secondary building unit (SBU), which is formed by vertex-shared between two {LiO4} and one {Cu(1)O4} polyhedra. These units repeat along b-axis forming infinite inorganic chains, these chains are in turn cross-linked by corner sharing with {Cu(2)O4} polyhedra to produce inorganic layers lying in the bc-plane. The neighboring layers are connected through the PPA ligand, leading to a 3D pillared-layered structure. The topological analysis reveals that the compound exhibits 3,4,10-c net. Finally, magnetic susceptibility measurement of this compound over the temperature range of 2–300 K reveals the occurrence of weak antiferromagnetic intrachain interactions., We acknowledge the financial support from Spanish Ministerio de Economía y Competitividad (MINECO-13-MAT2013-40950-R, MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060) and FEDER funding., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A fibrous titanium phosphate as repository for silver on modified surfaces of titanium and titanium alloys

  • García, Inés
  • Krivtsov, Igor V.
  • Mendoza-Meroño, Rafael
  • Mauvezín-Quevedo, Mario
  • Adawy, Alaa
  • Amghouz, Zakariae
  • Trobajo, Camino
Resumen del trabajo presentado al congreso Nanomaterials applied to Life Sciences (NALS), celebrado en Gijón (España) del 13 al 15 de diicembre de 2017., Silver is a metal known for its antimicrobial activity against Gram-positive and Gram-negative bacteria, including antibiotic-resistant strains, fungi, protozoa and certain viruses. It is used for treatment of infections, preventing bacterial colonization on medical devices and for water treatment. Silver, as an antiseptic agent, is efficient while present in glass, titanium and polymers. This motivates its use in biomedical applications, water and air purification, food production, cosmetics, clothing and numerous household products. Titanium and its alloys were widely used as artificial joints, bone fixation devices or dental implants, in orthopedic field, mainly due to their great mechanical properties, corrosion resistance and biocompatibility. However, some shortcomings of native titanium were found to hinder its osteointegration and even affect the long-term survival of Ti-based implants. The deposition of nanostructured thin films of certain inorganic compounds on the surface of a metal, thus creating thin film/metal composites, is of particular interest in this field. It has been shown that the materials composed of titanium-based coatings on the Ti-metal surfaces can be used as implants with excellent apatite-forming and antibacterial abilities. Recently, the surface wettability control has attracted significant attention because of the promising applications of superhydrophobic and superhydrophilic materials for self-cleaning, corrosion resistant, fluidic drag reduction, and oil-water separation. In this way, Yada et al. has reported the superhydrophilicity and superhydrophobicity properties of π-titanium phosphate nanorod thin films modified with alkylamine molecules (the first synthesis of π-Ti2O(PO4)2·2H2O was reported by our Lab in the end of the last century), while Lu has described the thin film preparation composed of π-titanium phosphate nanorods by performing a hydrothermal treatment of a titanium plate in phosphoric acid solution at 250 °C. Finally, Park et al. by performing a hydrothermal treatment of the titanium plate in phosphoric acid solution at 180 °C has also obtained a π-titanium phosphate thin film of approximately 5 μm thick and having needle-like surface microstructures. In this context, the present communication is devoted to the ability of π-titanium phosphate to the intra-crystalline incorporation of silver(I) cations as a way for the trapping of bioactive metals into a neutrally charged framework, with the consecutive incorporation of the produced material into titanium (and titanium alloys) surfaces., We thank the Spanish MINECO (MAT2013-40950-R, MAT2016-78155-C2-1-R) and FEDER for financing., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Co2+ substitution on microstructure and magnetic properties of CoxZn1-xFe2O4 nanoparticles

  • Mohamed, W. S.
  • Alzaid, Meshal
  • Abdelbaky, Mohammed S. M.
  • Amghouz, Zakariae
  • García-Granda, Santiago
  • Abu-Dief, Ahmed M.
In the present work, we synthesized CoxZn1-xFe2O4 spinel ferrite nanoparticles (x= 0, 0.1, 0.2, 0.3 and 0.4) via the precipitation and hydrothermal-joint method. Structural parameters were cross-verified using X-ray powder diffraction (XRPD) and electron microscopy-based techniques. The magnetic parameters were determined by means of vibrating sample magnetometry. The as-synthesized CoxZn1-xFe2O4 nanoparticles exhibit high phase purity with a single-phase cubic spinel-type structure of Zn-ferrite. The microstructural parameters of the samples were estimated by XRD line profile analysis using the Williamson–Hall approach. The calculated grain sizes from XRPD analysis for the synthesized samples ranged from 8.3 to 11.4 nm. The electron microscopy analysis revealed that the constituents of all powder samples are spherical nanoparticles with proportions highly dependent on the Co doping ratio. The CoxZn1-xFe2O4 spinel ferrite system exhibits paramagnetic, superparamagnetic and weak ferromagnetic behavior at room temperature depending on the Co2+ doping ratio, while ferromagnetic ordering with a clear hysteresis loop is observed at low temperatures (5K). We concluded that replacing Zn2+ ions with Co2+ ions changes both the structural and magnetic properties of ZnFe2O4 nanoparticles., This research was funded by Spanish “Ministerio de Economía y Competitividad” (MAT2016-78155-C2-1-R, MAT2013-40950-R, MAT2011-27573-C04-02 and FPI grant BES-2011-046948 to MSM.A.), “Gobierno del Principado de Asturias” (GRUPIN14-060) and FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two octahedral σ-borane metal (MnI and RuII) complexes containing a tripod κ3N,H,H-ligand: Synthesis, structural characterization, and theoretical topological study of the charge density

  • Maelen, Juan F. van der
  • Brugos, Javier
  • García-Álvarez, Pablo
  • Cabeza, Javier A.
Theoretical electron density (QTAIM) studies in the gas-phase have shown that the attachment of the BH3 group to the metal atom in complexes [Mn(κ3N,H,H-iPr2bzamBH3)(CO)3] (1) and [Ru(η5-C5Me5)(κ3N,H,H-iPr2bzamBH3)] (2) (HiPr2bzamBH3 = N-trihydridoborane-N,N′-bis(isopropyl) benzamidine) is symmetric in the latter but asymmetric in the former, and involves two B–H–metal interactions that are intermediate between κ1H (Shimoi type) and κ2H,B (agostic type). The herein reported results, coupled to previous ones on related complexes having a similar tripod κ3N,H,H-borane ligand, show that the bonding similarities and differences within each particular M(μ-H)2B moiety are not related to the type of metal atom, nor even to its coordination geometry, but mainly to the molecular symmetry., This work has been supported by Spanish MINECO projects (MAT2016-78155-C2-1-R and CTQ2016-75218-P) and Principality of Asturias grants (GRUPIN14-060 and GRUPIN14-009)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel hybrid iron fluoride based on 8-hydroxyquinoline: Crystal structure, thermal decomposition, spectroscopic characterization, and magnetic properties

  • Guesmi, Oussama
  • Abdelbaky, Mohammed S. M.
  • Martínez-Blanco, David
  • Ktari, Lilia
  • García-Granda, Santiago
  • Dammak, Mohamed
A novel hybrid compound, based on iron, fluoride and 8-hyroxyquinoline, and formulated as (8HQN)6[Fe4F18] (QF1), has been obtained by hydrothermal method and characterized by single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), Hirschfeld surface, IR spectroscopy, photoluminescence (PL), thermal analysis and magnetic study. (QF1) crystalizes in trigonal space group R3c with cell parameters a = 17.9239(5) Å, b = 17.9239(5) Å, c = 30.6196 (11) Å, V = 8519.1(5) Å3, and Z = 6. The crystal structure of (QF1) is built up from isolated tetramers [Fe4F18]6− surrounded by six cations 8HQN+. The cohesion between these entities is performed via NH⋯F and OH⋯F hydrogen bonds to form a three-dimensional network. Hirshfeld surface analysis was used to investigate intermolecular interactions, as well 2D finger plots were conducted to reveal the contribution of these interactions in the crystal structure quantitatively. IR spectra confirmed the presence of 8-hydroxyquinoleine molecules. The photoluminescence studies of (QF1) show a significate green emission at 2.14 eV associated with radiative recombination of excitons confined within the organic part when it was excited in UV–visible wavelength in the solid state at room temperature. Finally, the magnetic analysis shows that (QF1) has a paramagnetic behavior above 100 K., The Minister of Superior Education and Research of Tunisia, Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN-IDI/2018/170) Spain, are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beige materials for the ceramic industry: AlxVyFe1-xP1-yO4 (0.0 ≤ x ≤ 0.3, 0.0 ≤ y ≤ 0.1) solid solutions

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • Martínez-Blanco, David
  • Trobajo, Camino
  • García, José R.
  • García-Granda, Santiago
AlxVyFe1-xP1-yO4 (0.0 ≤ x ≤ 0.3, 0.0 ≤ y ≤ 0.1) compositions were synthesized via the chemical co-precipitation method. At 500 °C, α-FePO4 berlinite crystallizes together with FePO4 tridymite, Fe(III) occupying tetrahedral sites in both structures. The variation in the unit cell confirms the formation of solid solutions with α-FePO4 berlinite structure. These AlxVyFe1-xP1-yO4 (0.0 ≤ x ≤ 0.3, 0.0 ≤ y ≤ 0.1) solid solutions are stable between 800 and 1000 °C and when x > 0.2 at 1200 °C. Fe7P6O24 with Fe(II) and Fe(III) is detected in the compositions with the highest amount of Fe(III) at 1200 °C. The materials are paramagnetic between 100 and 300 K and the variation in their magnetic susceptibilities fits the Curie-Weiss law with negative Weiss constants (antiferromagnetism). At 1200 °C, the presence of small amounts of Fe(II) is associated with a slight decrease in μeff. The presence of vanadium in samples (y > 0) decreases their μeff. Optimal beige materials to work without sample fusion at 1200 °C are reported., We gratefully acknowledge the financial support provided by Ministerio de Ciencia, Innovación y Universidades, projects MAT2013-40950-R and MAT2016-78155-C2-1-R, and ERDF funding.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co2P2O7-Ni2P2O7 solid solutions: Structural characterization and color

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • Trobajo, Camino
  • García, José R.
  • García-Granda, Santiago
NH4[Co1−yNiyPO4]·H2O (0 ≤ y ≤ 1) single crystals were fired to prepare Co2−xNixP2O7 0 ≤ x ≤ 2 solid solutions between 800 and 1200°C. The structure of these solid solutions is α‐M2P2O7 (M = Co, Ni). The contraction of the unit cell with increasing x confirmed the formation of these solid solutions. The UV–vis–NIR spectra of these solid solutions were consistent with Co(II) and Ni(II) ions in the two different crystallographic sites (octahedral site and square pyramidal site) in the α‐M2P2O7 structure. Due to their thermal stability, Co2−xNixP2O7 (0 ≤ x ≤ 2) solid solutions with α‐M2P2O7 structure can be used as a blue, green, brown or yellow ceramic pigment., We gratefully acknowledge the financial support provided by Ministerio de Ciencia, Innovación y Universidades, projects MAT2013‐40950‐R and MAT2016‐78155‐C2‐1‐R and ERDF funding.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure, phase transitions, dielectric and vibrational studies and photoluminescence properties of a new iron fluoride based on bipyridine

  • Bouketaya, Sabrine
  • Elferjani, Atef
  • Abdelbaky, Mohammed S. M.
  • Dammak, Mohamed
  • García-Granda, Santiago
The new iron-fluoride, based on bipyridine formulated as FeF3(2,2′-bpy) (2,2′-bpy = 2,2′-bipyridine), was obtained by hydrothermal synthesis. The crystalline structure was characterized by single crystal X-Ray diffraction data analysis. It crystallizes in monoclinic space group Cc, with a = 14.030(4) Å, b = 9.487(3) Å, c = 7.650(2) Å and β = 103.287(3)º. Moreover, it exhibits three-dimensional organic-inorganic network, resulting from the association of [FeF4N2]∞ chains pertaining to corner sharing FeF4N2 octahedra extending along with the c-axis linked through weak C–H...F hydrogen bonds. The thermal analysis (TG, SDTA and DSC) of the title compound reveals the presence of the phase transitions at high temperature. In order to shed light on the electrical conductivity and dielectric properties of the title compound, we carried out, in the frequency range 200 to 2E5 Hz, impedance spectroscopy technique, in the temperature range 310–380K. The conductivity relaxation parameters of some H+ conducting in the FeF3(2,2′-bpy) material were determined from an analysis pertaining to electric conductivity data. Transport properties in this material appear due to proton hopping mechanism. Finally, the optical properties were evaluated by photoluminescence spectroscopy., We acknowledge financial support from the Ministry of Higher Education and Scientific Research of Tunisia and Spanish Ministerio de Economía y Competitividad (MAT2016–78155-C2-1-R and FPI grant BES-2011–046948 to MSM.A.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation and tunable cyclization of formamidinate ligands in carbonyl complexes of Mn(I): An experimental and theoretical study

  • Ruiz, Javier
  • Sol, Daniel
  • García, Lucía
  • Mateo, María A.
  • Vivanco, Marilín
  • Maelen, Juan F. van der
A subtle change in the substituents at the nitrogen atoms in the N,N′-diarylformamidine complexes of formula fac-[Mn(RN═C(H)NHR)(bipy)(CO)3]+ (1a, R = phenyl; 1b, R = 4-dimethylaminophenyl) produces, upon deprotonation, either the monodentate formamidinate complex fac-[Mn(PhN═C(H)NPh)(bipy)(CO)3] (2a) or metallacylic complex 3b, which features a carbamoyl residue arising from nucleophilic attack to a vicinal carbonyl ligand. Complexes type 3 are also formed when using N-aryl-N′-alkyl-formamidines as well as N,N′-dialkylformamidines. Quantum Theory of Atoms in Molecules computations show the existence of a weak bond critical point of mainly noncovalent electrostatic type between the uncoordinated nitrogen atom of the formamidinate and a carbonyl ligand in 2a, which appears to be an isolable intermediate species that precedes the formation of metallacyclic complexes 3., This work was supported by the Spanish Ministerio de Economía y Competitividad (Projects CTQ2015-66959-P and MAT2016-78155-C2-1-R) and the Principado de Asturias grant GRUP-IN-14-060. D.S. thanks the Principado de Asturias for a scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal synthesis, crystal structure, thermal behaviour and magnetic properties of a new ammonium-chromium-iron(III) bis(hydrogenphosphate)

  • Iglesias, Isabel
  • Alfonso, Belén F.
  • Trobajo, Camino
  • Huidobro, José A.
  • Amghouz, Zakariae
  • Martínez-Blanco, David
  • Blanco, Jesús A.
  • García, José R.
The hydrothermal synthesis and the chemical-physical characterization of an ammonium-chromium(III)-iron(III) bis(hydrogenphosphate), Cr0.34Fe0.66NH4(HPO4)2 [CrFeNP] is reported. It was obtained in aqueous media by reaction between chromium(III) chloride, iron(III) chloride, urea, and orthophosphoric acid. The crystal structure of CrFeNP was determined from single-crystal X-ray diffraction data. It crystallizes in the triclinic system, space group P-1, and exhibits two types of different infinite tunnels along [0 1 0] and [1 0 0] directions, where the ammonium cations are located. Thermal analysis shows that the solid is stable up to ca. 600 K. The activation energy of the thermal decomposition up to 1273 K was computed by isoconversional methods. In addition, the magnetic behaviour of the material was investigated from magnetic susceptibility and magnetization measurements. CrFeNP undergoes two successive magnetic transitions at temperatures  Tc = 17. 9 K and  Tt = 3.1 K, which could be related to a ferri- and an antiferromagnetic magnetic phase transitions, respectively., This work was financially supported by Spanish MINECO (MINECO-15-MAT2014-56116-C4-2-R and MAT2016-78155-C2-1-R), and FEDER. T
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ X-ray diffraction and the internal friction study of the binary yellow 18-carat gold alloy

  • Lamiri, Imene
  • Abdelbaky, Mohammed S. M.
  • Martínez-Blanco, David
  • Mari, Daniele
  • Hamana, Djamel
  • García-Granda, Santiago
Phase transitions in AuCu alloy are investigated using in situ temperature XRD and mechanical spectroscopy. The measurements are carried out from room temperature up to 973 K starting from the ordered phase AuCuI. Using a temperature ramp rate of 1 K/min, the following phase transition sequence was recorded on heating: AuCuI - > AuCuI + AuCuII- > AuCuI + AuCuII + A1 - > AuCuII + A1 - > A1. The mechanical (elastic and anelastic) properties are determined by this phase transition sequence. The mechanical spectroscopy, using a forced torsion pendulum, shows a peak due to antiphase boundary movement in the orthorhombic phase AuCuII according to the temperature dependent internal friction tests. The isothermal frequency measurements show several thermally activated peaks in the phase transitions intervals., Financial support from the Algerian Ministry of Higher Education and Scientific Research (PNE scholarship), Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN-IDI/2018/170) are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of the order -disorder phase transition series in AuCu by in-situ temperature XRD and mechanical spectroscopy

  • Lamiri, Imene
  • Martínez-Blanco, David
  • Abdelbaky, Mohammed S. M.
  • Mari, Daniele
  • Hamana, Djamel
  • García-Granda, Santiago
In-situ temperature XRD and mechanical spectroscopy were applied to study phase transitions in AuCu alloy from the disordered FCC state (A1). The phase transition temperature intervals were investigated upon heating and cooling using a rate of 1 K/min in order to be thoroughly determined. The following sequences of phase transitions were recorded upon continuous heating: A1->AuCuI ->AuCuII->A1 and on subsequent cooling: A1 ->A1+AuCuI+AuCuII ->AuCuI+AuCuII ->AuCuI. This transition sequences determine also temperature dependency of elastic and anelastic properties. Mechanical spectroscopy using a forced torsion pendulum shows a peak due to antiphase boundaries motion characterizing the orthorhombic phase AuCuII and a transient peak with the that appears in the tetragonal phase AuCuI together with the classical Zener peak in the A1 phase., Financial support from the Algerian Ministry of Higher Education and Scientific Research (PNE scholarship), Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.) and Gobierno del Principado de Asturias (GRUPIN14-060), Spain are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetite nanoparticles with aminomethylenephosphonic groups: synthesis, characterization and uptake of europium(III) ions from aqueous media

  • Kostenko, Liudmyla
  • Kobylinska, Natalia
  • Khainakov, Sergei
  • García-Granda, Santiago
Two adsorbents with covalently bound aminomethylenephosphonic acid functions (and referred to as MNPs/AMPA and MNPs/SiO2-AMPA) were synthesized from two types of amino-functionalized magnetic nanoparticles (MNPs) via Moedritzer-Irani reaction. The sorbents with anchored dopamine ligand (MNPs/dopa) or aminopropyl groups (MNPs/SiO2-NH2), and the MNPs/AMPA were characterized by X-ray diffraction, FTIR, transmission electron microscopy and vibrating sample magnetometry. Surface modification does not adversely impact the physical properties of the starting magnetite. Compared to the size of the unmodified Fe3O4 (magnetite) nanoparticles (7–12 nm), the average size of functionalized nanoparticles is increased to 10–16 nm. Similarly, the magnetic saturation decreased from 67.5 emu g-1 to 42.0 emu g−1, and the surface area is increased up to 205 m2 g−1 for MNPs/SiO2-AMPA. The kinetics of the adsorption of Eu(III) on the sorbent is ultra-fast, and equilibria are attained within 5–10 min at room temperature. The adsorption kinetics can be described by a pseudo-second-order model. Adsorption and desorption conditions were tested with respect to the removal of Eu(III) ions from water solution. The adsorption capacities for Eu(III) at pH 7.0 are 77 mg g−1 and 69 mg g−1 for MNPs/AMPA and MNPs/SiO2-AMPA nanoparticles, respectively. Eu(III) was quantified by ICP-MS. The limit of detection (LOD) for Eu(III) is 0.05 ng L−1 (based on the 3σ criterion), with an enrichment factor of 150. The selectivity over ions such as Tb(III), Fe(III), Zn(II), Cu(II), and Ca(II) ions was studied. Under optimal condition the distribution coefficient for Eu(III) relative to these ions is near 105 mL g−1. The sorbents can be easily retrieved from even large volumes of aqueous solutions by magnetic separations. The method was tested for spiked water samples (with recoveries from 96.6–102.5%) and for rock minerals., Financial support was provided by Ministry of Economy and Competitiveness (MINECO, Spain) MAT2016-78155-C2-1-R and EU (FP-7-PEOPLE-2009-IRSES grant No. 247603).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization, Hirshfeld surface analysis, vibrational (FT-IR and Raman) and optical properties of the tris (4-Bromo-N, N-dimethylanilinium) hexachlorobismuthate (III)

  • Kahouli, Kaouther
  • Hajji, Rachid
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Chaabouni, Slaheddine
A novel interesting hybrid organic-inorganic compound with the formula [C8H11BrN]3BiCl6. Tris(4-Bromo-N, N-dimethylanilinium) hexachlorobismuthate (III) was grown by the slow evaporation technique at ambient temperature. It is structurally characterized by vibrational spectroscopy, Hirshfeld surface analyses, Solid state 13C NMR, UV-Visible absorption and photoluminescence measurements. A preliminary single crystal X-ray diffraction study revealed that the title compound crystallizes in the non-centrosymmetric (space group P212121) with crystallographic parameters: a = 9.2820(3) Å,b = 13.7960(5) Å, c = 27.4298(12) Å, v = 3512.5(2) Å3 with Z = 4. The Crystal structure composed of discrete [BiCl6]3- anions surrounded by three [C8H11BrN]+cations, which are connected via N-H⋯Cl and C-H⋯Cl hydrogen bonds arranged in a three dimensional network. The Hirshfeld surface analysis associated with 2D fingerprint plots were used to visualize and explore the significant intermolecular interactions in the crystal structure quantitatively.13C Nuclear Magnetic Resonance (NMR) spectrum is in agreement with the X-ray structure. Furthermore, the optical absorption and photoluminescence measurements, exhibit a strong purple photoluminescence emission located at 2.92 eV and observed at room temperature., This work is support by the “Department of Chemistry, Faculty of Sciences of Sfax, University of Sfax, BP 1171, 3038 Sfax, Tunisia”, Spanish MINECO (MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN-ID2018-170).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure, spectroscopic measurement, thermal studies and optical properties of a new non-centrosymmetric hybrid compound

  • Sakka, Ameni
  • Jellali, Aycha
  • Hamdi, Besma
  • Abdelbaky, Mohammed S. M.
  • Naïli, Houcine
  • García-Granda, Santiago
  • Zouari, Rihad
A novel inorganic-organic hybrid material of bis (5,7-dichloro-8-hydroxyquinolium) tetrachlorozincate (II) dihydrate was crystallized and characterized by IR, Raman, 13C NMR spectroscopy, scanning electron microscopy (SEM) and thermal analyses (TG/DTG/SDTA). The solid-state structures were determined by single crystal X-ray diffraction. The compound was found to crystallizes in the non-centrosymmetric orthorhombic system, space group P212121 with the following cell parameters a = 10.4872(3) Å, b = 13.4464 (5) Å, c = 18.0305 (7) Å, V = 2542.57(15) Ǻ3 and Z = 4, to ensure that our samples are single-phase, the purity of our products was verified by X-Ray Powder Diffraction Analysis, while the composition of our phase was verified by semi-quantitative analysis EDXS. Thermal analysis showed that the complexes decompose in three steps: the structural water was firstly progressively lost, then the neutral ligand of 5,7-dichloro-8-hydroxyquinolium and lastly the second ligand with 4 mol of chlorine in the form of hydrochloric acid. The final phase solid product at 713 °C is zinc oxide. The theoretical calculations were conducted using B3LYP/LanL2DZ basis sets using GAUSSIAN09, for studying the structural parameters, vibrational and non-linear optical characterization (NLO) of the investigated compound. The analyses of the optical spectra indicate that this compound has a direct band gap energy equal to (2.72 eV) due to direct transition. This energy is much larger than 0.02 eV. The photoluminescence properties (PL) of the compound were investigated in the solid-state at room temperature., Financial support from Faculty of Science in University of Sfax, Tunisia, Spanish Ministerio de Economía y Competitividad (MINECO-13-MAT2013-40950-R, MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060) and FEDER funding are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and molecular structure of a new metal-organic complex based on Zn(II) and quinoline, a precursor for fabrication of ZnO nanoparticles applicable in the photocatalytic reactions

  • Razmara, Zohreh
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
A novel zinc-based pseudohalide metal–organic complex formulated as [Zn(NCS)4].2(C9H8N) (1) (C9H7N = quinoline) has been synthesized by a sonochemical process. The structure of 1 has been characterized by elemental analysis, atomic absorption spectroscopy (AAS), Fourier-transform infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), differential thermal analysis (DTA) and single-crystal X-ray diffraction (SC-XRD). Complex 1 crystallizes in a monoclinic system, space group P21/c with unit cell parameters a = 8.5406(6) Å, b = 35.6706(17) Å, c = 8.6418(6) Å, and β = 107.093(7)º. Its structure consists of a tetrahedral [Zn(NCS)4] complex and two molecules of quinoline. In the crystal lattice of complex 1, the [Zn(NCS)4]2- complex anion is stacked in hexagonal-like columns forming 2D layers, each column includes an organic chain formed from one of [C9H8N]+ organic cations where the other cation separates between layers. The hydrogen bonds and some weak interactions are responsible for linking and strengthening the whole structure. Magnetic measurements revealed that complex 1 is a weak ferromagnet at room temperature. Nanoparticles of ZnO have been successfully synthesized by thermal decomposition of 1 and characterized by FT-IR spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller N2 adsorption-desorption analysis. The photocatalytic activity of commercial ZnO and as-obtained ZnO was investigated for degradation of methyl orange (MO) and Bisphenol A (BPA) under UV irradiation. The results revealed that the synthetic ZnO had higher catalytic activity than the commercial ZnO and the highest degradation occurs at pH = 4 and pH = 8 for MO and BPA, respectively., The financial support from University of Zabol (Grant No-9618-39), Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN-IDI/2018/170) are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, physico-chemical characterization and theoretical study of a new Pb(II) complex [C10H22N2]3·PbCl5·3Cl·3H2O

  • Feddaoui, Imen
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Essalah, Khaled
  • Ben Nasr, Cherif
  • Mrad, Mohamed Habib
A novel hybrid material, [C10H22N2]3·PbCl5·3Cl·3H2O, has been synthesized and its structure was determined by single-crystal X-ray diffraction. In the atomic arrangement, the different entities are held together through NH⋯Cl, OH⋯Cl and OH⋯O hydrogen bonds to form a three-dimensional network. Intermolecular interactions were investigated by Hirshfeld surfaces. The powder XRD data confirms the phase purity of the crystalline sample. The resulting IR spectrum calculated by the DFT/B3LYP/LanL2DZ method, is similar to the experimental spectrum allowing a good correlation between the experimental and theoretical wavenumbers. The optical properties in the UV–visible region have been explored by the UV–visible absorption. The photoluminescence (PL) spectroscopy, which was investigated at room temperature, exhibited one emission at 426 nm. Thermal analysis discloses a phase transition at 435 K and the decomposition of the sample starts from 554 K., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060), FEDER, and the Secretary of State for Scientific Research and Technology of Tunisia, are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, vibrational spectroscopy, DFT, optical study and thermal analysis of a new stannate(IV) complex based on 2-ethyl-6-methylanilinium (C9H14N)2[SnCl6]

  • Feddaoui, Imen
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Essalah, Khaled
  • Ben Nasr, Cherif
  • Mrad, Mohamed Habib
The new organic-inorganic compound, (C9H14N)2[SnCl6], has been synthesized and characterized by single-crystal X-ray diffraction at room temperature. Structural analysis indicates that this compound crystallizes in the monoclinic system with C2/m space group. The NH⋯Cl hydrogen bonds between (C9H14N)+ cations and [SnCl6]2- dianions contribute to the cohesion and the stability of the atomic arrangement. Hirshfeld surface analysis was used to investigate intermolecular interactions, as well 2D finger plots were conducted to reveal the contribution of these interactions in the crystal structure quantitatively. Furthermore, the room temperature Infrared (IR) spectrum of the title compound was analyzed on the basis of data found in the literature. The optical properties of the crystal were studied using optical absorption UV–visible and photoluminescence (PL) spectroscopy, which were investigated at room temperature exhibited one band at 237 nm and a photoluminescence emission at 407 nm. Experimental room-temperature X-ray studies were supported by theoretical methods using the DFT/B3LYP methods with the LanL2DZ basis set. The X-ray powder is in agreement with the X-ray structure. To determine molecular electrical transport properties we studied the energy difference between Occupied, HOMO, and Lowest Unoccupied, LUMO orbitals. Moreover, this compound was characterized by thermal analysis between 300 and 750 K and shows that the compound remains stable up to the temperature 383 K. Finally, X-ray photoelectron spectroscopy (XPS) analysis is reported to determine the degree of oxidation of tin in this compound and analyze the surface chemistry of (C9H14N)2[SnCl6]., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), GobiernodelPrincipado de Asturias (GRUPIN14-060), FEDER, and the Secretary of State for Scientific Research and Technology of Tunisia, are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The crystal structure of visible light absorbing piezoelectric semiconductor SrNb2V2O11 revisited: high-resolution X-ray diffraction, vibrational spectroscopy and computational study

  • Odynets, Ievgen V.
  • Khainakov, Sergei
  • García-Granda, Santiago
  • Gumeniuk, Roman
  • Zschornak, Matthias
  • Soloviova, Natalia
  • Slobodyanik, Nikolay S.
  • Horcajada, Patricia
  • Babaryk, Artem A.
Ferroelectric materials have a long-term track record of applications in electronics due to their spontaneous electric polarization. This property can be coupled with photoabsorption properties, resulting in a bulk photoelectric effect, the new on-the-edge domain for ferroelectric use. In this sense, considering the low bandgap of binary strontium-niobium ortho-vanadate SrNb2V2O11, which has recently been reported as ferroelectric, we propose here a deep experimental and computational understanding of its structural and physical properties, considered relevant for further applications. Microcrystalline SrNb2V2O11 was prepared by a conventional solid state route, proposing a synthetic pathway deduced from thermoanalytical observations and high-temperature powder X-ray diffraction. The crystal structure (space group Cc, a = 18.15415(2) Å, b = 5.52811(6) Å, c = 9.52728(1) Å, β = 99.8033(8)°, Z = 2), successfully solved using high resolution powder X-ray diffraction, reveals the presence of distorted perovskite-like [Nb4V2O12] units when preparing [Nb2V2O11] sheets. By application of symmetry adapted mode analysis, the non-centrosymmetry originates from Sr atom displacements and [Nb4V2O12] unit “breathing” deformations, which can be explained in terms of the group–subgroup relationship. By ground state analysis of the polytypes across possible C-centered monoclinic cells, only the present experimentally based structural model (space group Cc) can be adopted, substituting the so far reported crystallographic data. The semiconducting nature of the phase, with a direct bandgap of 2.3 eV, was determined by optical absorption measurements and confirmed computationally. By coupling Raman spectroscopy and density functional perturbation theory, the dielectric properties (εriso = 55) were accurately calculated and the observed optical phonons were fully interpreted. Finally, using the Berry phase formalism, we predicted a value of spontaneous polarization of 16.6 μC cm−2 in the absence of confident existing experimental data., Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. S. K., S. G. G. and A. B. B. acknowledge the financial support from Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R). P. H. and A. A. B. are indebted to the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7/2007-2013) under REA grant agreement no. 291803. This work is partially supported by the ICDD GiA #12-02 “Patterns of inorganic oxides and salts based on oxoanions” and Raphuel (ENE2016-79608-C2-1-R) project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activation of two-dimensional MoS2 nanosheets by wet-chemical sulfur vacancy engineering for the catalytic reduction of nitroarenes and organic dyes

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Caridad, Bárbara
  • Villar Rodil, Silvia
  • Díaz-González, María Del Mar
  • Fernández-Sánchez, C.
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Two-dimensional 2H-phase MoS2 nanosheets can be used as a non-noble metal-based catalyst for nitroarene and organic dye reduction, thus being of potential utility towards the treatment of industrial wastewater. However, their activity is severely limited by the inertness of their pristine basal surface. We report here a simple approach for the catalytic activation of solvent-dispersed MoS2 nanosheets based on the introduction of sulfur vacancies by hydrazine treatment. MoS2 nanosheets boasting markedly improved catalytic activities in the reduction of 4-nitrophenol, 4-nitroaniline, methyl orange and methylene blue by NaBH4 could be obtained, outperforming many prior non-noble metal-based catalysts developed for such reactions. Notably, the improvement in catalytic activity was not compromised by the use of a proper dispersant to colloidally stabilize the activated nanosheets in the aqueous reaction medium. Substrate-supported catalysts could be prepared by immobilizing the nanosheets on melamine foam, facilitating their handling and reutilization. The chemical processes taking place between the investigated reagents and the MoS2 catalyst were also discussed and rationalized, based on which a mechanism for nitroarene/dye reduction mediated by the sulfur vacancies was proposed., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and the ERDF through project RTI2018-100832-B-I00, and Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G.-D. is grateful to the Spanish MINECO for his pre-doctoral contract (BES/2016 077830). A.A. acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R) and the Government of the Principality of Asturias (GRUPIN-IDI/2018/170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local structure of supported keggin and wells-dawson heteropolyacids and its influence on the catalytic activity

  • García-López, Elisa I.
  • Marcì, Giuseppe
  • Krivtsov, Igor
  • Casado Espina, Jorge
  • Liotta, Leonarda F.
  • Serrano Rubio, Aída
[EN] Keggin [PW12O40]3– and Wells–Dawson [P2W18O62]6– heteropolyanions are nanosized transition-metal-oxygen clusters belonging to the heteropolyacids (HPAs) family. They are widely used as catalysts due to their high Brønsted acidity, and their dispersion on solid supports favors the accessibility to their acid sites generally increasing the catalytic activity. A series of binary materials composed of Keggin or Wells–Dawson HPAs and SiO2, TiO2, and ZrO2 have been prepared by impregnation or solvothermal methods. Remarkable differences have been found in the catalytic activities among the unsupported and supported HPAs. These differences have been correlated in the past to the structural changes of the HPAs due to the cluster–support interaction, which is different depending on preparation methodologies of the binary material. In the present work, the modes of interaction between the two types of HPA, Keggin and Wells–Dawson, and various supports have been studied by X-ray absorption spectroscopy. The obtained data have been compared to the characterization of the same materials reported before by using different bulk and surface physicochemical techniques. The characterization results were then used to correlate the interaction modes between the HPAs and the supports with the catalytic performances reported for 2-propanol dehydration to propene and for propene hydration to 2-propanol. The results reveal that the deposition of HPA by impregnation or solvothermal treatment may cause distortions in the H3PW12O40 cluster structure depending on the presence of stronger (TiO2 and ZrO2) or weaker (SiO2) basic sites in the support, respectively. Moreover, the type of preparation method affects the structure and acidic properties of the supported HPAs. In particular, during the preparation of TiO2 and ZrO2 with HPA by in situ solvothermal method, the reaction of the HPA with the products of metal alkoxides hydrolysis occurs with consequent destruction of the Keggin structure. Therefore, the catalytic activity of such materials is poor. These modifications, in addition to the bulk and surface features of the supported HPAs, affected the catalytic 2-propanol dehydration to a significant extent. On the contrary, the propene hydration was less influenced, probably, due to the propene nonpolar nature., I.K. acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R), Gobierno del Principado de Asturias (GRUPIN-ID2018-170), and Ministry of Education and Science of the Russian Federation (grant No. 4.9722.2017/8.9). L.F.L. is grateful to progetto di Ricerca ARS01_00637 Energie per l′Ambiente-TARANTO (PNR 2015-2020) for financial support. The authors acknowledge The European Synchrotron (The ESRF), MINECO, and CSIC for the provision of measurements using the BM25-SpLine beamline. They also thank the BM25-SpLine staff for the technical support beyond their duties.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Topological analysis of the electron density in the carbonyl complexes M(CO)8 (M = Ca, Sr, Ba)

  • Maelen, Juan F. van der
The quantum theory of atoms in molecules (QTAIM) has been applied to the recently synthesized alkaline-earth cubic Oh-symmetric complexes Ca(CO)8 (1), Sr(CO)8 (2), and Ba(CO)8 (3). Theoretical calculations reveal that M–CO interactions in these complexes can be properly described as highly polar bonds, showing some features traditionally associated with transition-metal bonding, although with noticeable differences, as well. In this sense, δ(M–C) and δ(M···O) delocalization indexes for bonding and nonbonding interactions, electron localization funcion (ELF) analyses, source function (SF) calculations, and the interacting quantum atoms (IQA) approach, among other methodologies, produce results consistent with interactions dominated by electrostatics between the CO ligands and alkaline-earth metals, with an increasing degree of covalency on going from 1 to 3 and without any significant π-back-donation., This work has been supported by the Spanish MINECO project MAT2016-78155-C2-1-R and the Principality of Asturias Grant No. GRUP-IN-14-060., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Fosfatos de titanio modificados: de materiales luminiscentes a contenedores de gases

  • García-Glez, Jorge
Programa de Doctorado en Materiales., This work is supported by Ministerio de Economía y Competitivdad (MAT2016-78155-C2-1-R, MAT2013-40950-R, MAT2011-27573-C04-02, Gobierno del Principado de Asturias (GRUPIN14-060), and FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exfoliation and europium(III)-functionalization of α-titanium phosphate via propylamine intercalation: from multilayer assemblies to single nanosheets

  • García-Glez, Jorge
  • Trobajo, Camino
  • Adawy, Alaa
  • Amghouz, Zakariae
Layered α-titanium phosphate intercalated with propylamine, Ti(HPO4)2·2C3H7NH2·H2O (α-TiPPr), has been synthesized by solid-vapour reaction and then exfoliated via a single-stage approach based on overnight stirring in aqueous medium. The obtained nanosheets were then functionalized using solid–liquid reaction with europium(III) nitrate aqueous solutions. The obtained materials were characterized by powder X-ray diffraction (PXRD), N2 adsorption–desorption isotherms at 77 K, scanning electron microscopy (SEM), transmission electron microscopy (TEM, SAED, STEM-EDX), atomic force microscopy (AFM) and photoluminescence spectroscopy (PL). The europium(III) sorption takes place via two distinct pathways, the first is the previously reported C3H7NH3+/[Eu(H2O)6]3+ ion-exchange process into the titanium–phosphate interlayer space of the multilayered α-TiPPr. The second pathway is the self-assembly of single-sheets which is provoked by electrostatic interactions between the negatively charged titanium–phosphate sheets and the Eu(III)-aqueous cations, leading to the formation of layered nanoparticles., Financial support from Spanish Ministerio de Economía y Competitividad (MAT2013-40950-R and MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN14-060), and FEDER funding are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic analysis of the thermal decomposition of iron(III) phosphates: Fe(NH3)2PO4 and Fe(ND3)2PO4

  • Iglesias, Isabel
  • Huidobro, José A.
  • Alfonso, Belén F.
  • Trobajo, Camino
  • Espina, Aránzazu
  • Mendoza-Meroño, Rafael
  • García, José R.
This article belongs to the Special Issue Solution Chemical Kinetics 2019., The hydrothermal synthesis and both the chemical and structural characterization of a diamin iron phosphate are reported. A new synthetic route, by using n-butylammonium dihydrogen phosphate as a precursor, leads to the largest crystals described thus far for this compound. Its crystal structure is determined from single-crystal X-ray diffraction data. It crystallizes in the orthorhombic system (Pnma space group, a = 10.1116(2) Å, b = 6.3652(1) Å, c = 7.5691(1) Å, Z = 4) at room temperature and, below 220 K, changes towards the monoclinic system P21/n, space group. The in situ powder X-ray thermo-diffraction monitoring for the compound, between room temperature and 1100 K, is also included. Thermal analysis shows that the solid is stable up to ca. 440 K. The kinetic analysis of thermal decomposition (hydrogenated and deuterated forms) is performed by using the isoconversional methods of Vyazovkin and a modified version of Friedman. Similar values for the kinetic parameters are achieved by both methods and they are checked by comparing experimental and calculated conversion curves., This work was financially supported by Spanish MINECO (MINECO-15-MAT2014-56116-C4-2-R and MAT2016-78155-C2-1-R), and FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and crystal structure of 3-(adamantan-1- yl)-4-(2-bromo-4-fluorophenyl)-1H-1,2,4-triazole5(4H)-thione

  • Abdelrazeq, Alaa S.
  • Ghabbour, Hazem A.
  • El-Emam, Ali A.
  • Ahmed Osman, Doaa
  • García-Granda, Santiago
In the title compound, C18H19BrFN3S, the 1,2,4-triazole ring is nearly planar with a maximum deviation of −0.009 (3) and 0.009 (4) Å, respectively, for the S-bound C atom and the N atom bonded to the bromo­fluoro­phenyl ring. The phenyl and triazole rings are almost perpendicular to each other, forming a dihedral angle of 89.5 (2)°. In the crystal, the mol­ecules are linked by weak C—H⋯π(phen­yl) inter­actions, forming supra­molecular chains extending along the c-axis direction. The crystal packing is further consolidated by inter­molecular N—H⋯S hydrogen bonds and by weak C—H⋯S inter­actions, yielding double chains propagating along the a-axis direction. The crystal studied was refined as a racemic twin., Funding for this research was provided by: Financial support from the Spanish Ministerio de Economıia y Competitividad (grant No. MAT2016-78155-C2-1-R); Gobierno del Principado de Asturias (award No. GRUPIN-IDI/2018/170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water‐soluble polymeric carbon nitride colloidal nanoparticles for highly selective quasi‐homogeneous photocatalysis

  • Krivtsov, Igor V.
  • Mitoraj, Dariusz
  • Adler, Christiane
  • Ilkaeva, Marina
  • Sardo, Mariana
  • Mafra, Luís
  • Neumann, Christof
  • Turchanin, Andrey
  • Li, Chunyu
  • Dietzek, Benjamin
  • Leiter, Robert
  • Biskupek, Johannes
  • Kaiser, Ute
  • Im, Changbin
  • Kirchhoff, Björn
  • Jacob, Timo
  • Beranek, Radim
Heptazine‐based polymeric carbon nitrides (PCN) are promising photocatalysts for light‐driven redox transformations. However, their activity is hampered by low surface area resulting in low concentration of accessible active sites. Herein, we report a bottom‐up preparation of PCN nanoparticles with a narrow size distribution (ca. 10±3 nm), which are fully soluble in water showing no gelation or precipitation over several months. They allow photocatalysis to be carried out under quasi‐homogeneous conditions. The superior performance of water‐soluble PCN, compared to conventional solid PCN, is shown in photocatalytic H2O2 production via reduction of oxygen accompanied by highly selective photooxidation of 4‐methoxybenzyl alcohol and benzyl alcohol or lignocellulose‐derived feedstock (ethanol, glycerol, glucose). The dissolved photocatalyst can be easily recovered and re‐dissolved by simple modulation of the ionic strength of the medium, without any loss of activity and selectivity., This work was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Projektnummer 364549901—TRR 234 [Projects B6, B7, C3 and Z2] and BE 5102/3‐1. We acknowledge also support by Spanish MINECO (MAT2016‐78155‐C2‐1‐R) and Gobierno del Principado de Asturias (GRUPIN‐ID2018‐170), and the project CICECO‐Aveiro Institute of Materials, FCT Ref. UID/CTM/50011/2019, financed by national funds through the FCT/MCTES. L.M., M.S., and M.I. also acknowledge the National NMR Network (PTNMR), partially supported by Infrastructure Project N° 022161, and FCT/MCTES for funding (Project PTDC/QEQ‐QAN/6373/2014). B.K. acknowledges the University of Iceland Research Fund for support through a PhD fellowship. Computational resources were provided by the state of Baden‐Württemberg through bwHPC and the German Science Foundation (DFG) under Grant No. INST 40/467‐1 FUGG. C.N. and A.T. acknowledge financial support of the DFG through the project TU 149/8‐2 “Towards photo‐active membranes for artificial photosynthesis” as well as the DFG through a research infrastructure grant INST 275/257‐1 FUGG. I.K. acknowledges the support of the Alexander von Humboldt Foundation through the Humboldt Research Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of hydrophobic magnetic nanoparticles as cleanup adsorbents for pesticide residue analysis in fruit, vegetable, and various soil samples

  • Hubetska, Tetiana S.
  • Kobylinska, Natalia
  • García, José R.
A cleanup procedure based on hydrophobic magnetic nanoparticles for QuEChERS extraction followed by GC-MS method for the simultaneous determination of 16 organochlorine pesticides was developed. The type and amount of cleanup adsorbents (C18/GCB/Fe3O4/Fe3O4@Triton), the volume and polarity of the extraction solvent were optimized. The method was validated according to SANTE/11813/2017 and ICH/2005/Q2/R1 guidelines. Spiked-sample recoveries of 84–108% with RSD below 8% were obtained for all the tested pesticides in strawberry. Quantification was carried out using matrix-matched calibration plots, which displayed good linearity (R2 > 0.99), the limits of quantification being less than the maximum residue limits (MRL) for food. The elaborated procedure with satisfactory results was applied in to determine the pesticides in fruit, vegetable (strawberries, avocadoes, watermelons, radishes, and flesh kiwis) and soil (agricultural, urban and lab-made) samples. The most frequently founded pesticide residues were 4,4′-DDE, 4,4′-DDD, lindane, and 4,4′-DDT, which in all cases were found to be below MRL. The highest concentration of 4,4′-DDT was founded in agricultural and lab-made soils., This research was supported by the Research Program - MINECO (MAT2016-78155-C2-1-R). The authors are grateful to the Ministry for the Economy and Business (Spain) for this financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Z-type PGeP pincer germylene ligand in a T-shaped palladium(0) complex

  • Cabeza, Javier A.
  • García-Álvarez, Pablo
  • Laglera-Gándara, Carlos J.
  • Pérez-Carreño, Enrique
A dipyrromethane-based germylene decorated with two phosphane groups has been used to prepare an unusual T-shaped palladium(0) containing a PGeP pincer germylene that acts as a Z-type ligand. This compound is a strong reducing reagent, as it has been easily oxidized to germyl–palladium(II) derivatives with a gold(I) complex, HCl and Ph2S2 through processes that involve formal addition of a bond of the oxidant across the Ge–Pd bond., This work was supported by MINECO (CTQ2016-75218-P, MAT2016-78155-C2-1-R and RED2018-102387-T) and AEI (PID2019-104652GB-I00) projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of yellow and red inorganic pigments from Mg0.5Cu1.5VxP2−xO7 (0 ≤ x ≤ 2) solid solutions

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • Martínez, David
  • Trobajo, Camino
  • García, José R.
  • García-Granda, Santiago
The structural characterization of Mg0.5Cu1.5VxP2−xO7 (0.0 ≤ x ≤ 2.0) compositions was performed and the colour parameters of these materials measured. Solid solutions in the α-Cu2P2O7, β-Cu2P2O7 and β-Cu2V2O7 structures were obtained by incorporation of V(V) in the α-Cu2P2O7 and β-Cu2P2O7 structures and P(V) in the β-Cu2V2O7 structure. Solid solutions with the α-Cu2P2O7 structure are obtained at 500–600 °C when the vanadium:phosphorus ratio is lower than 2/3 (x ≤ 1.2). At 600 °C, these materials have a bright yellow colour. In these compositions, the transition to the β-Cu2P2O7 structure occurs at 800 °C. This transition modifies the colour but it keeps the yellow colouration for compositions. At 1000 °C, the Cu3P2O8 phase coexists with the β-Cu2P2O7 phase and the yellow colouration is lost. Solid solutions with the β-Cu2V2O7 structure are obtained at 600–800 °C when the amount of vanadium is high (x ≥ 1.5). The increase in the amount of vanadium in Mg0.5Cu1.5VxP2−xO7 (0.0 < x ≤ 2.0) compositions changes the colour of the materials from yellow to red at 600 °C (the Mg0.5Cu1.5P2O7 composition, x = 0.0, is pale green). The colour of the materials darkens with increasing temperature and compositions with x > 1.5 melted at 1000 °C., We gratefully acknowledge the financial support provided by Spain’s Ministerio de Ciencia, Innovación y Universidades, project MAT2016-78155-C2-1-R, and ERDF funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure, Hirschfield surface analysis, thermal and DFT investigation accomplished with photoluminescence study of bis(N, N-diethylethylendiammonium)decabromodiantimoinate(III)

  • Essalhi, Rim
  • Abdelbaky, Mohammed S. M.
  • Elleuch, Slim
  • Zouari, Fatma
  • García-Granda, Santiago
The hybrid compound [C6H18N2]2Sb2Br10 was synthesized by slow evaporation at room temperature. X-ray single crystal diffraction, Infrared spectroscopy coupled with DFT calculation, optical absorption, photoluminescence and thermal analysis were used to characterize the centrosymmetric compound. Crystallization was obtained in the monoclinic system P21/c space group with cell parameters: a = 10.7309 (3) Å, b = 10.5842 (3) Å, c = 14.5551 (4) Å, β = 96.962 (3) ° and Z = 4. Results showed that the structure is built up from bioctahedral [Sb2Br10]4- dimers composed of two equivalent distorted octahedrons sharing one edge and N, N-diethylethylendiammoniumcations. The cohesion and stabilization between these entities is performed via N–H⋯Br hydrogen bonds. Crystal structure analysis was supported with the Hirshfeld surface (HS) and fingerprint plots to identify the significant intermolecular interactions in the crystal network.Furthermore, Thermal analysis of the title compound revealed no phase transition in the temperature range between 25 and 450°. The X-ray powder was in agreement with the X-ray structure. Scanning electronic microscopy (SEM) was also carried out. The theoretical calculations were conducted using the DFT approach with the B3LYP/LanL2DZ basis set to depict the vibrational IR spectrum of the investigated compound in its ground state. A satisfactory agreement was found between the calculated and experimental results for the structural parameters and the vibrational properties. Moreover, Photoluminescence measurements showed a strong emission line at 3.64eV, the unaided-eye detectable blue luminescence emission came from the excitonic transition in the Sb2Br10 anions., We acknowledge the Financial support from the Ministry of Higher Education and Scientific Research of Tunisia and Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN-IDI/2018/170) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient adsorption of pharmaceutical drugs from aqueous solution using a mesoporous activated carbon

  • Hubetska, Tetiana S.
  • Kobylinska, Natalia
  • García, José R.
The removal of widely used pharmaceuticals by new granular mesoporous activated carbon materials prepared via a simple one-step pyrolysis process was studied. The series of mesoporous carbons (MC) were derived from sucrose/polystyrene using two mesoporous matrices: MCM-48 and SBA-15 sieves. Two different activation schemes were used to obtained samples: steam-pyrolysis at 900 °C, and chemical modification (with HNO3, H2O2 and their mixture) at 200 °C. The studied conditions of chemical oxidation led to significant structural alterations. Compared to the activated carbon treated by steam at 900 °C, the treatment via chemical oxidation increased the total volume of pores from 1.09 to 2.73 cm3 g−1. The total adsorption capacity towards tetracycline was found to be proportional to the mesoporous volume and the amount of surface O-containing groups. From the experimental adsorption isotherms, the maximum adsorption capacity was calculated 909.2 mg g−1 for tetracycline at pH 7. The kinetics of adsorption fits the pseudo-second order model perfectly. The adsorption data treated by both Langmuir and Freundlich models indicates that the adsorption was monomolecular. This research provides insight into the adsorption behavior of antibiotics on non-activated and activated mesoporous carbonous materials and facilitates their application to removal of pharmaceuticals from contaminated aqueous solutions. The potential adsorption mechanism of mesoporous carbons for the adsorption of antibiotics was proposed. The granular mesoporous carbon after oxidation by mixture of HNO3 and H2O2 with ration 1:1 exhibited much higher adsorptive activity and still showed relatively high adsorption stability even after five cycles, which were potentially suitable for easy separation and high efficiency., This study was supported by grants from EU FP-7-PEOPLE-2009-IRSES (№ 247603). The University of Oviedo is grateful for financial support from Spain’s Ministry for the Economy and Business - MINECO (MAT2016-78155-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elaboration, crystal structure, characterization and DFT calculation of a new Hg(II) inorganic-organic hybrid salt [C6H16N2O]HgCl4

  • Mrad, Mohamed Habib
  • Feddaoui, Imen
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Ben Nasr, Cherif
The crystal structure of new organic-inorganic hybrid (2-hydroxyethyl)piperazine-1,4-diiumtetrachloromercurate (II), [C6H16N2O]HgCl4, was determined by X-ray diffraction analysis. In the atomic arrangement, the different entities are held together through N-H⋯Cl, C-H⋯Cl and O-H⋯Cl hydrogen bonds to form ribbons. The powder XRD pattern was in good relation with the results of single crystal structure analysis. This compound was also investigated by scanning electronic microscopy, energy-dispersive X-ray, infrared spectroscopy and differential thermal analysis. DFT calculations allowed the attribution of the IR bands. Intermolecular interactions were investigated by Hirshfeld surfaces. The thermal analysis shows that this compound is stable below 380 ​K., The financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013- 40950-R, and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060), FEDER, the Secretary of State for Scientific Research and Technology of Tunisia and Department of Chemistry, College of Sciences and Humanities, Shaqra University, 11911, Ad-Dawadmi, Saudi Arabia are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elaboration, crystal structure, vibrational, optical properties, thermal analysis and theoretical study of a new inorganic-organic hybrid salt [C4H12N2]4·Pb2Cl11·Cl·4H2O

  • Feddaoui, Imen
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Ben Nasr, Cherif
  • Mrad, Mohamed Habib
A new organic–inorganic hybrid salt[C4H12N2]4·Pb2Cl11·Cl·4H2O, containing [Pb2Cl11]7−anions, has been synthesized and characterized by several techniques. X-ray diffraction study shows that the compound crystallizes in the orthorhombic system and Pnnm space group with a = 8.210 (5), b = 25.782 (5), c = 9.467 (5) Å and V = 2003.9 (17) Å3.The structure of the title compound can be described by organic-inorganic layers extending parallel to the (a, b) plane at z = 0 and z = ½. These layers are built up by means of hydrogen bonds forming a three-dimensional network. Intermolecular interactions were investigated by Hirshfeld surfaces. Scanning electronic microscopy (SEM) and energy-dispersive X-ray (EDX) were carried out. Vibrational assignments of the title compound are discussed by FT-IR and FT-Raman spectroscopic studies and DFT calculations allowed the attribution of the spectral bands. The optical study was also investigated by UV–Vis absorption and photoluminescence spectroscopy. The thermal behavior was studied by TGA/DTA analysis., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060), FEDER, the Secretary of State for Scientific Research and Technology of Tunisia and Department of Chemistry, College of Sciences and Humanities, Shaqra University, 11911, Ad-Dawadmi, Saudi Arabia are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphane-functionalized heavier tetrylenes: synthesis of silylene- and germylene-decorated phosphanes and their reactions with Group 10 metal complexes

  • Cabeza, Javier A.
  • García-Álvarez, Pablo
  • Laglera-Gándara, Carlos J.
  • Pérez-Carreño, Enrique
The stable phosphane-functionalized heavier tetrylenes E(tBu2bzam)pyrmPtBu2 (E = Si (1Si), Ge (1Ge); tBu2bzam = N,N′-ditertbutylbenzamidinate; HpyrmPtBu2 = ditertbutyl(2-pyrrolylmethyl)phosphane) have been prepared by reacting the amidinatotetrylenes E(tBu2bzam)Cl (E = Si, Ge) with LipyrmPtBu2. The reactions of 1Si and 1Ge with selected M0 and MII (M = Ni, Pd, Pt) metal precursors have allowed the synthesis of square-planar [MCl2{κ2E,P-E(tBu2bzam)pyrmPtBu2}] (M = Ni, Pd, Pt; E = Si, Ge), tetrahedral [Ni{κ2E,P-E(tBu2bzam)pyrmPtBu2}(cod)] (E = Si, Ge; cod = 1,5-cyclooctadiene) and triangular [M{κ2E,P-E(tBu2bzam)pyrmPtBu2}(PPh3)] (M = Pd, Pt; E = Si, Ge) complexes, showing that 1Si and 1Ge are excellent Si,P- and Ge,P-chelating ligands that, due to their large steric bulk, are able to stabilize three-coordinate Pd0 and Pt0 complexes., This work was supported by MINECO-FEDER projects MAT2016-78155-C2-1-R, CTQ2016-75218-P and RED2018-102387-T., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Response to “comment on ‘topological analysis of the electron density in the carbonyl complexes M(CO)8 (M = Ca, Sr, Ba)’”

  • Maelen, Juan F. van der
The Comment by Holzmann et al. does not properly reflect the conclusions of the original article, as shown in the current response. New calculations on the title compounds, as well as on M(CO)2 (M = Ca, Sr, Ba) complexes with both D∞h and C2v symmetry, included in the current response and based not only on the Quantum Theory of Atoms in Molecules but also on the Natural Bond Orbital approach, strengthen the arguments of the original article., This work has been supported by the Spanish MINECO project MAT2016-78155-C2-1-R and the Principality of Asturias grant GRUP-IN-14-060., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural study, spectroscopic characterization, thermal behavior, DFT calculations and antimicrobial properties of a new hybrid compound, (C7H9N2)2[HgCl4]·H2O

  • Jomaa, Mariem Ben
  • Bourguiba, Noura Fakher
  • Chebbi, Hammouda
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Korbi, Nedra
  • Ouzari, Hadda-Imene
A new bis(benzamidinium)tetrachloridomercurate(II) monohydrate, (C7H9N2)2[HgCl4]·H2O, was synthesized by slow evaporation at room temperature and characterized by powder XRD, IR, Raman, UV-vis spectroscopy and thermal analysis. Single-crystal X-ray diffraction analysis indicates that the asymmetric unit of the title compound is formed by tetrachloridomercurate [HgCl4]2− anion, a protonated organic cation (C7H9N2)2+ and one free water crystallization molecule. The cohesion of the structure is insured by N–H···Cl, O–H···Cl and N–H ···O hydrogen bonds and π-π stacking interactions. The density functional theory (DFT)-optimized structure at the B3LYP/6-311++G(2d,2p) level is compared with the experimentally determined molecular structure. Comprehensive experimental and theoretical structural studies on the compound are carried out through IR and UV-vis spectroscopies. The compound was characterized by thermal analysis to determine its thermal behavior with respect to the temperature. The in vitro antibacterial activity of the compound against different bacterial strains was evaluated. The three-dimensional Hirshfeld surface (3 D-HS) and the two-dimensional fingerprint plots (2 D-FP) reveal that the structure is dominated by H···Cl/Cl···H (51.0%) and H···H (32.3%) contacts., Financial support from the Ministry of Higher Education, Scientific Research and Technology of Tunisia, Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN-IDI/2018/170) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and crystal structure of a new copper (II) complex, designed to produce efficient successor of Cu2O, toward synergy of adsorption and photodegradation of MB

  • Razmara, Zohreh
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
A new copper (II) coordination complex formulated as [Cu (dipic)(phen)(2‐MePy)]. 2H2O (1) where phen = 1, 10‐phenanthroline, dipic2− = pyridine‐2,6‐dicarboxylato and 2‐MePy = 2‐methyl pyrrole was synthesized through a simple and environment‐friendly reaction under ultrasound irradiation. Also, complex 1 was synthesized by hydrothermal process at 120 °C for 3 days. The corresponding structure of complex 1 was characterized by elemental analysis, atomic absorption spectroscopy (AAS), inductively coupled plasma (ICP), conductivity measurement, Fourier‐transform infrared spectroscopy (FT‐IR), Raman spectroscopy, ultraviolet–visible spectroscopy (UV–Vis), thermal gravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and fluorescence. The crystal structure of the hydrothermally synthesized complex was characterized by single crystal X‐ray diffraction (SC‐XRD(, which revealed a triclinic structure. In the remainder of this study, the Cu2O nanoparticles have been prepared via thermal decomposition of hydrothermal and ultrasound complexes and characterized by ICP, FT‐IR, powder X‐ray diffraction (XRD), SEM and N2 adsorption/desorption. Adsorption and visible‐light‐driven photocatalytic capabilities of two synthetic Cu2O were investigated in the removal of MB from water. The result showed that the synthesized catalysts have good catalytic activity and the photocatalytic degradation is more effective in dye removal of MB compared with the adsorption., The financial support from University of Zabol (Grant No‐9618‐39), Spanish Ministerio de Economía y Competitividad (MAT2016‐78155‐C2‐1‐R), Gobierno del Principado de Asturias (GRUPIN‐IDI/2018/170) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, characterization, crystal structure, and thermal behavior of new triazolium salt along with docking studies

  • Hosseini, S. G.
  • Moeini, Keyvan
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
A new triazolic compound 4,5-diamino-3-methyl-4H-1,2,4-triazol-1-ium nitrate (DAMT·HNO3) is synthesized and characterized by elemental analysis, FTIR, 1H NMR spectroscopy, and single crystal X-ray diffraction along with thermal analyses (TGA/DSC). The X-ray analysis of the compound reveals triazolium nitrate salt with a new tautomeric form. Among different N-H…X bonds (X = C, N, O), the N-H…O ones form R 22(4), R 42(8), R 44(18), R 24(14), and R 21(4) hydrogen bond motifs. The crystal network of DAMT·HNO3 is also stabilized by π-π stacking interactions between triazole rings. Thermal studies reveal that this compound has a good thermal stability and can release a considerable amount of heat at the first decomposition step. Further, the thermal properties of this compound are compared with its chloride salt analogue DAMT·HCl. The thermodynamic stability of DAMT·HNO3 is studied by DFT calculations and compared with those of DAMT·HCl and DAMT. The ability of these compounds to interact with a DNA molecule is investigated by docking studies., We acknowledge the financial support from Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.) and FEDER funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nuevos materiales compuestos basados en silicio-xerogel para baterías de ion litio

  • Santos-Gómez, Lucía dos
  • Montes Morán, Miguel Ángel
  • García, José R.
  • García-Granda, Santiago
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Resumen del trabajo presentado al V Workshop de la Red E3TECH / I Workshop Iberoamericano a Distancia E3TECH: “Aplicaciones Medioambientales y Energéticas de la Tecnología Electroquímica”, celebrado de forma telemática del 28 al 31 de octubre de 2020., Este trabajo ha sido financiado por el Ministerio de Economia, Industria y Competitividad de España (CTQ2017-87820-R y MAT2016-78155-C2-1-R) y El Principado de Asturias (FICYT-FEDER: IDI/2018/000118 y IDI/2018/000170). Lucía dos Santos-Gómez agradece al Ministerio de Ciencia, Innovación y Universidades por su beca Juan de la Cierva Formación (FJC2018-036746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Graphene aerogels: A simultaneous combination of both high porosity and large electrical conductivity in a single material

  • Santos-Gómez, Lucía dos
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • García, José R.
  • García-Granda, Santiago
  • Arenillas de la Puente, Ana
Trabajo presentado a la 2nd International Online-Conference on Nanomaterials (IOCN), celebrada del 15 al 30 de noviembre de 2020., This work has been supported by CTQ2017-87820-R, MAT2016-78155-C2-1-R, IDI/2018/000118 and IDI/2018/000170 research grant (Spain). L. dos Santos-Gómez thanks the Ministerio de Ciencia, Innovación y Universidades for her Juan de la Cierva Formación grant (FJC2018-036746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eficacia del permanganato potásico en la degradación de cianuro y tiocianato en aguas residuales mineras, Effectiveness of potassium permanganate for the degradation of cyanide and thiocyanate from mine wastewater

  • Fernández Pérez, Begoña
  • Viña Mediavilla, Juan José
  • Ayala Espina, Julia
  • Ovín Ania, María Concepción
This work was focused on evaluating the viability of potassium permanganate as an oxidizing agent for the simultaneous degradation of cyanides and thiocyanates from an acid mine wastewater. Data has confirmed the effectiveness of permanganate solutions for the oxidation of cyanides, with removal efficiencies between 95-100 %, in waters with an initial concentration of cyanides of 312 mg/L and thiocyanates of 314 mg/L. In contrast, the chemical oxidation of thiocyanates with permanganate was less efficient, with overall yields below 50 % for the highest oxidant concentrations assayed. Furthermore, the studies from synthetic water confirmed that the partial oxidation of thiocyanates using permanganate results in the release of a residual amount of cyanides that remains in the treated water. For this reason, the simultaneous oxidation of cyanides and thiocyanates in not complete for any of the studied industrial wastewaters, finding not negligible residual concentrations of both cyanide and thiocyanate, after the reaction with permanganate. This makes it necessary to consider further treatments of the wastewater for a full removal of the cyanide species., Agradecemos al Gobierno español por su apoyo a través de los programas MINECO (Ministerio de Economía y Empresa de España), becas CTM2014-56770-R y MAT2016-78155-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure, Hirshfeld surface analysis, vibrational and optical properties of organic-inorganic hybrid compound (C13H16N2)5(BiCl6)3•Cl

  • Kahouli, Kaouther
  • Mesbeh, Radhia
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Koumina, Abdelaziz
  • Chaabouni, Slaheddine
A novel hybrid material (C13H16N2)5(BiCl6)3•Cl has been successfully synthesized by slow evaporation at room temperature. The compound structure was determined by single-crystal X-ray diffraction and crystallized in the triclinic space group Pī (a = 14.7757(2) Å, b = 14.7799(2) Å, c = 23.1633(4) Å, α = 89.016(2)°, β = 84.0080(10)°, γ = 74.0400(10)° and v = 4836.57(13) Å3, Z = 2) at 296 K. The crystal packing consists of three isolated [BiCl6]3- octahedral anions and an isolated chloride ion Cl− surrounded by five crystallographically independent4,4′-Diaminiumdiphenylmethane cations. The organic layers are inserted between the inorganic ones and connected with N-H…Cl and C-H…Cl hydrogen bonds to build a three dimensional network. The vibrational spectrum measured at room temperature by FT-IR spectroscopy (4000-400 cm−1) on polycrystalline samples shows the presence of organic cation. The number of 13C CP-MAS NMR lines is in full agreement with the crystallographic data. The Hirshfeld surface analysis associated with 2D fingerprint plots visualizing the significant intermolecular interactions in the crystal structure have been used to examine molecular shapes. The optical and photoluminescence properties of the compound were investigated in the solid-state at room temperature., This work is support by the “Department of Chemistry, Faculty of Sciences of Sfax, University of Sfax, BP 1171, 3038 Sfax, Tunisia”, Spanish MINECO (MAT2016-78155-C2-1-R) and Gobiernodel Principado de Asturias (GRUPIN-ID2018-170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ag- and Sr-enriched nanofibrous titanium phosphate phases as potential antimicrobial cement and coating for a biomedical alloy

  • García, Inés
  • Trobajo, Camino
  • Amghouz, Zakariae
  • Alonso-Guervos, Marta
  • Díaz, Raquel
  • Mendoza-Meroño, Rafael
  • Mauvezín-Quevedo, Mario
  • Adawy, Alaa
Biomaterials and their surfaces regulate the biological response and ultimately the quality of healing at a possible site of implantation. The physical, chemical and topographical properties of implants' surfaces play a decisive role in the biological integration process for their immediate loading and long-term success. Since at this level of biological interaction nano-dimensionality is basically entailed, bio-functional nanostructured composites either as filling/cement or coating to metallic implants are required. This study shows the possibility of synthesizing two phases of nanostructured titanium phosphate (π and ρ polymorphs) and enriching them with silver nanoparticles and strontium. More importantly, Ag-Sr-enriched nanostructured π‑titanium phosphate is induced to grow on a commercially available titanium alloy (Ti-6Al-4V), widely used in orthopedic and dental implants, under highly controlled conditions. Structural and microscopic studies, using XRD, HRTEM and SEM altogether confirm the resultant phases and their enrichment with strontium and silver nanoparticles with an average particle size around 6 nm. Using confocal laser scanning microscopy, the surface roughness was measured and is found to lay at the interface between the nanosized and microsized topologies. Ion release assessments showed that the presence of strontium controlled the release rate of silver ions and this could be beneficial in terms of decreasing the accompanied cytotoxicity that is usually encountered at high concentrations of silver release. Antimicrobial and cell proliferation assays have proved that enriching titanium phosphate with strontium and silver nanoparticles has improved their antimicrobial properties, while the cytotoxicity could be controlled., The University of Oviedo acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R) and the Government of the Principality of Asturias (GRUPIN-IDI/2018/170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ceramic pigments from CoxNi3-xP2O8 (0 ≤ x ≤ 3) solid solutions

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • Trobajo, Camino
  • García, José R.
  • García-Granda, Santiago
CoxNi3-xP2O8 (0 ≤ x ≤ 3) solid solutions were synthesized via the chemical co-precipitation method. Variation of unit cell parameters and interatomic distances indicated that these solid solutions with the Ni3P2O8 structure are stable between 800 and 1200 °C in compositions with 0 ≤ x ≤ 1.5 and between 800 and 1000 °C when (0 ≤ x ≤ 3). When (2.5 ≤ x ≤ 3.0), the solid solutions lead to the Co3P2O8 structure, being stable between 800 and 1000 °C. The yellow colour of the Ni3P2O8 compound changes to pink or red when Co(II) ions are incorporated in the structure as Ni3P2O8 solid solutions are formed. Bands corresponding to second and third electronic transitions of the Co(II) ions in octahedral coordination appear in the 450–600 nm in the UV-V spectra, and they are responsible of the observed changes in the colour. Absorbance in the visible spectra was also obtained from enamelled samples but a new band at 650 nm with considerable absorbance when x > 1.0 increased the blue amount, and colour of the enamelled samples was yellowish brown, brown, green and blue., We gratefully acknowledge the financial support provided by Spain's Ministerio de Ciencia, Innovación y Universidades, project MAT2016-78155-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanolayered metal phosphates as biocompatible reservoirs for antimicrobial silver nanoparticles

  • García, Inés
  • Trobajo, Camino
  • Amghouz, Zakariae
  • Adawy, Alaa
This article belongs to the Special Issue Advances in Phosphate Materials: Structural, Technological and Biomedical Applications., There is an increasing demand on synthesizing pharmaceuticals and biomaterials that possess antimicrobial and/or antiviral activities. In this respective silver nanoparticles are known for their excellent antimicrobial activity. Nevertheless, their uncontrolled release in a biological medium can induce a cytotoxic effect. For this, we explored the use of nanolayered metal phosphates based on titanium and zirconium as materials that can be enriched with silver nanoparticles. Employing the hydrothermal route, crystalline α-phases of zirconium and titanium phosphates (α-ZrP, α-TiP) were synthesized and there after surface-enriched with silver nanoparticles. The structural assessment confirmed the stability of the structures and their sizes are in the nanoscale at least in one dimension. The cytocompatibility assays confirmed the biocompatibility of the pristine phases and the antimicrobial assay confirmed that both silver-enriched nanolayered structures maintain an antibacterial effect at reasonably low concentrations., This research was funded by MINECO, grant number MAT2016-78155-C2-1-R and by the Government of the Principality of Asturias, grant number GRUPIN-IDI/2018/170., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sol−gel processing of water-soluble carbon nitride enables high-performance photoanodes

  • Adler, Christiane
  • Krivtsov, Igor V.
  • Mitoraj, Dariusz
  • Santos-Gómez, Lucía dos
  • García-Granda, Santiago
  • Neumann, Christof
  • Kund, Julian
  • Kranz, Christine
  • Mizaikoff, Boris
  • Turchanin, Andrey
  • Beranek, Radim
In spite of the enormous promise that polymeric carbon nitride (PCN) materials hold for various applications, the fabrication of high-quality, binder-free PCN films and electrodes has been a largely elusive goal to date. Here, we tackle this challenge by devising, for the first time, a water-based sol−gel approach that enables facile preparation of thin films based on poly(heptazine imide) (PHI), a polymer belonging to the PCN family. The sol−gel process capitalizes on the use of a water-soluble PHI precursor that allows formation of a non-covalent hydrogel. The hydrogel can be deposited on conductive substrates, resulting in formation of mechanically stable polymeric thin layers. The resulting photoanodes exhibit unprecedented photoelectrochemical (PEC) performance in alcohol reforming and highly selective (∼100 %) conversions with very high photocurrents (>0.25 mA cm−2 under 2 sun) down to <0 V vs. RHE. This enables even effective PEC operation under zero-bias conditions and represents the very first example of a ‘soft matter’-based PEC system capable of bias-free photoreforming. The robust binder-free films derived from sol−gel processing of water-soluble PCN thus constitute a new paradigm for high-performance ‘soft matter’ photoelectrocatalytic systems and pave the way for further applications in which high-quality PCN films are required., This work was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)–Projektnummer 364549901–TRR 234 [Projects B6, B7, C2, C4 and Z2] and BE 5102/5-1. C.N and A.T. acknowledge financial support of the DFG through the project TU 149/8-2 “Towards photo-active membranes for artificial photosynthesis” as well as the DFG through a research infrastructure grant INST 275/257-1 FUGG. S.G.G. acknowledges support by Spanish MINECO (MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN-ID2018-170). L.d.S.G. acknowledges Juan de la Cierva Formación scholarship. I.K. acknowledges the support of the Alexander von Humboldt Foundation through the Humboldt Research Fellowship. Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and proton conductivity studies of fibrous π-Ti2O(PO4)2·2H2O: application in chitosan-based composite membranes

  • Babaryk, Artem A.
  • Adawy, Alaa
  • García, Inés
  • Trobajo, Camino
  • Amghouz, Zakariae
  • Colodrero, Rosario M. P.
  • Cabeza, Aurelio
  • Olivera-Pastor, Pascual
  • Bazaga-García, Montse
  • Santos-Gómez, Lucía dos
Although the fibrous polymorphic modification of titanium phosphate, π-Ti2O(PO4)2·2H2O (π-TiP) has been known for decades, its crystal structure has remained unsolved. Herewith, we report the crystal structure of π-TiP at room temperature, as determined from synchrotron radiation powder X-ray diffraction, and corroborated by 31P solid state NMR and accurate density functional theory calculations. In contrast to the previously reported ρ-TiP polymorph, the as-synthesized hydrated phase crystallizes in the monoclinic system (P21/c, a = 5.1121(2) Å, b = 14.4921(9) Å, c = 12.0450(11), β = 115.31(1)°, Z = 4), and is composed of corner-sharing titanium octahedra and phosphate units arranged in a pattern that is unique to the ρ-TiP polymorph. The unit cell was confirmed by electron diffraction, while the formation of planar packing imperfections and stacking faults along the [101] plane was revealed by HRTEM analysis. An in situ dehydration study of π-TiP, monitored by high-temperature powder X-ray diffraction, led to a new anhydrous monoclinic (P21/c, a = 5.1187(13) Å, b = 11.0600(21) Å, c = 14.4556(26), β = 107.65(2)°, Z = 4) phase that crystallizes at 500 °C. The latter resembles the packing fashion of the parental π-TiP, albeit titanium atoms are present in both distorted tetrahedral and octahedral coordination environments. Anhydrous π-TiP was found to partially rehydrate at room temperature, reversibly adopting the structure of the initial phase. The studies carried out under different conditions of leaching and impregnation with H3PO4 showed that π-TiP exhibits an extrinsic proton conductivity (1.3 × 10−3 S cm−1 at 90 °C and 95% RH) due to the presence of the protonated phosphate species bound on the particles surface, as revealed by 31P MAS-NMR spectroscopy data. The composite membranes of Chitosan (CS) matrices filled with H3PO4-impregnated π-TiP solid show an increment of proton conductivity up to 4.5 × 10−3 S cm−1, at 80 °C and 95% RH, which is 1.8-fold higher than those of the bare CS membranes., This work has been supported by Ministerio de Ciencia, Innovación y Universidades and Ministerio de Economía, Industria y Competitividad from Spain (MAT2016-78155-C2-1-R, MAT2016-77648-R and PID2019-110249RB-I00), Junta de Andalucía (FQM-113) research project and Principado de Asturias–FICYT-FEDER (IDI/2018/000170). Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. Artem A. Babaryk would like to thank Prof. Santiago García-Granda (SYSTAM Group), the Department of Physical and Analytical Chemistry, University of Oviedo, for the SRPXRD data (APS 11 BM-B “Mail-In” program, under proposal no. GUP-65338). Prof. José Manuel Recio (MALTA-Consolider Team) is acknowledged for providing computational facilities at the University of Oviedo. The authors thank Prof. José R. García and S. Khainakov, Department of Organic and Inorganic Chemistry, University of Oviedo, for their generous scientific assistance. L. dos Santos-Gómez thanks the Ministerio de Ciencia, Innovación y Universidades for her Juan de la Cierva Formación grant (FJC2018-036746-I), M. Bazaga-García thanks Junta de Andalucía for her Postdoc PAIDI grant, and R. M. P. Colodrero thanks UMA Research Plan for her financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization and colour of Ni3−xCuxP2O8 (0 ≤ x ≤ 3) materials

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • Trobajo, Camino
  • García, José R.
  • García-Granda, Santiago
The structural characterization of Ni3−xCuxP2O8 (0.0 ≤ x ≤ 3.0) compositions was performed and the colour parameters of these materials measured. Solid solutions with Ni3P2O8, Ni2CuP2O8 and Cu3P2O8 structures were obtained and the compositional range in which they are formed was established. Structural distortion was detected in these solid solutions when x increases from the variation in the unit cell parameters and that of the interatomic distances. Solid solutions with Ni3P2O8 structure are stable at 1200 °C and may be used as ceramic pigments. Changes in the colour of these materials were related to the structural changes. Yellow materials are obtained from Ni3−xCuxP2O8 solid solutions with a Ni3P2O8 or Ni2CuP2O8 structure and a gradual change from yellow to brown is obtained with the introduction of Cu(II) in the Ni3P2O8 structure, 0.0 ≤ x ≤ 0.7 at 1200 °C., We gratefully acknowledge the financial support provided by Spain’s Ministerio de Ciencia, Innovación y Universidades, Project MAT2016-78155-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sunflower biomass power plant by-products: Properties and its potential for water purification of organic pollutants

  • Hubetska, Tetiana S.
  • Kobylinska, Natalia
  • García, José R.
The present study explores possibility of using sunflower seed husk agricultural biowastes from industrial pyrolysis power plant as a feedstock for preparation of activated carbon (AC). Sunflower biomass by-products contain up to 70 % of carbon with residual seed husk components, have low specific surface area (less than 21 m2 g−1) and smaller number of oxygen-containing groups in comparison with wood-based biochars. The main process parameters of AC preparation, namely a type of an activation agent (organic solvent, HNO3, NaOH), temperature and duration of the carbonization step, were optimized in respect to adsorption efficiency. We found that simple pre-treatment of sunflower biomass with tetrahydrofuran easily converts it into biochar precursor having large number of carbonyl and hydroxyl groups. Further thermal and chemical activation of the biochar precursor results in formation of AC products with specific surface area in the range from 625 to 980 m2 g−1 and from 1000 to 1755 m2 g−1, respectively. Methylene blue (MB) was used as a test molecule for characterization of adsorption properties of the obtained AC. Kinetics studies showed that MB adsorption on AC is fast and follows pseudo-second-order model. MB adsorption on biochar and AC is well described by Langmuir isotherm, assuming monolayer formation of MB on the surface of adsorbents via chemical interactions. Adsorption capacity of AC towards MB achieved by nitric acid activation is higher (379.0 mg g−1) than capacity of benchmark commercial activated carbon from Norit. The study opens up possibilities for the development of by-product-based adsorbents via the straightforward, eco-friendly approach, with specific focus on the economic effect achieved with these materials., The University of Oviedo is grateful for financial support from Spain’s Ministry for the Economy and Business - MINECO (MAT2016-78155-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultralight-weight graphene aerogels with extremely high electrical conductivity

  • Santos-Gómez, Lucía dos
  • García, José R.
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • García-Granda, Santiago
  • Arenillas de la Puente, Ana
The integration of 2D graphene sheets into a porous and macroscopic structure is extremely attractive for application in several electrochemical fields. In this regard, for the first time, the synthesis of 3D graphene aerogels is reported by using a rapid, easy, cost-effective, and scalable at industrial level methodology. These aerogels integrate the intrinsic properties of graphene with a high pore volume. To achieve this ultraporous graphene network, resorcinol/formaldehyde polymer with controllable porosity is employed as a binder and a cross-linker material, and a graphene oxide solution provides the graphene building blocks. Two series of materials with and without catalyst for resorcinol/formaldehyde reaction and with different synthesis conditions and graphene contents are studied. The resulting graphene aerogels present low density, large macroporosity, and electrical conductivity values as high as 852 S m−1, with 97.58% of porosity, which is the highest value of electrical conductivity reported so far in the literature for ultralight-weight graphene aerogels., This work was supported by the Ministerio de Economía, Industria y Competitividad from Spain (CTQ2017-87820-R and MAT2016-78155-C2-1-R) and Principado de Asturias—FICYT-FEDER (IDI/2018/000118 and IDI/2018/000170). L.d.S.-G. thanks the Ministerio de Ciencia, Innovación y Universidades for her Juan de la Cierva Formación grant (FJC2018-036746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heteropolyacids supported on boron nitride and carbon nitride for catalytic and catalytic photo-assisted alcohol dehydration

  • García-López, Elisa I.
  • Pomilla, Francesca R.
  • Krivtsov, Igor
  • Serrano, Aida
  • Liotta, Leonarda F.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Marcì, Giuseppe
Keggin H3PW12O40 (PW12) and Wells-Dawson H6P2W18O60 (P2W18) heteropolyacids (HPAs) are photo(catalysts) for various acid-promoted and redox catalytic reactions. Their activity increases if they are deposited on certain supports as metal oxides or carbon materials. Although the surface area and acid-base interactions of the HPAs with supports are considered as key factors for the performance of the binary material, the role of the local structure changes in the HPAs upon their immobilization on solids must be also of primary importance, directly affecting both acidity and photoredox properties. Here, the (photo)catalytic performance of Keggin and Wells-Dawson heteropolytungstates supported on boron nitride (BN) and two types of carbon nitride (C3N4) in the gas-solid 2-propanol dehydration to propene has been studied. Apart from characterizing the materials by a set of conventional laboratory-scale structural and physical-chemical techniques, an insight into the variations of the local structure of supported HPAs is provided by means of X-ray absorption spectroscopy (XAS), and their influence on the supported HPAs (photo)catalytic activity is discussed. The irradiation with UV light increased the activity of both heteropolytungstates with respect to the catalytic experiments. The apparent activation energy calculated for the photo-assisted process resulted always lower with respect to that obtained for the catalytic one alone. Moreover, the materials that showed the highest apparent turnover frequency (TOF) were those in which the HPAs were impregnated on graphitic C3N4 or on BN and, in particular, the highest TOF values were observed at the highest temperature for the PW12/BN and P2W18/BN samples. Interestingly, the highest activity of HPAs supported on BN seems to be due to the stabilization of the W octahedral coordination, according to the XAS data., LFL is grateful to progetto di Ricerca ARS01_00637 Energie per l’Ambiente-TARANTO (PNR 2015-2020) for financial support. IK acknowledges support by Spanish MINECO (MAT2016-78155-C2-1-R), Gobierno del Principado de Asturias (GRUPIN-ID2018-170) and the Alexander von Humboldt Foundation through the Humboldt Research Fellowship. S.V.-R. and J.I.P. acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIU), the Spanish Agencia Estatal de Investigación and European Regional Development Fund (ERDF) through project RTI2018-100832B-I00, and partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233). A.S acknowledges financial support from the MCIU through the projects MAT2017-86540-C4-1-R and RTI2018-095303-A-C52 and from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017t2/IND5395). The European Synchrotron (ESRF), MCIU and Consejo Superior de Investigaciones Científicas (CSIC) are also acknowledged for the provision of synchrotron radiation facilities. We also thank the BM25-SpLine staff for the technical support beyond their duties., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Impact of Co2+ substitution on microstructural evolution and magnetic properties of zinc ferrite nanoparticles synthesized by precipitation and hydrothermal-joint method

  • Abdelbaky, Mohammed S. M.
  • Abu-Dief, Ahmed M.
  • García-Granda, Santiago
Resumen del póster presentado al 25th Congress of the International Union of Crystallography (IUCr), celebrado en Praga (Rep. Checa) del 14 al 22 de agosto de 2021., The microstructural characterization of spinel-ferrites has been long discussed in the literature. Such interests are justified by the spinel-ferrites potential applications that involve spintronic and magnetic resonance imaging (MRI), gas sensors, magnetic recording, medical diagnostics, antibacterial agents and self-controlled magnetic hyperthermia. In the present work, we have synthesized CoxZn1-xFe2O4 spinel ferrite nanoparticles (x= 0, 0.1, 0.2, 0.3 and 0.4) via the precipitation and hydrothermal-joint method. Structural parameters were cross-verified using Xray diffraction (XRD) and electron microscopy based-techniques. The magnetic parameters were determined by means of vibrating sample magnetometry. The as-synthesized CoxZn1-xFe2O4 nanoparticles exhibit high phase purity with a single-phase cubic spinel-type structure of Znferrite. The microstructural parameters of the samples were estimated by XRD line profile analysis using Williamson-Hall method. The calculated crystallite sizes from XRD analysis for the synthesized samples ranged from 8.3 to 11.4 nm. The electron microscopy analysis revealed that all powder samples are composed of regular spherical nanoparticles with highly homogeneous elemental composition. The CoxZn1-xFe2O4 spinel ferrite system exhibits paramagnetic, superparamagnetic and weak ferromagnetic behavior at room temperature depending on the Co2+ doping ratio, while ferromagnetic ordering with a clear hysteresis loop is observed at low temperature (5K). We concluded that the substitution of Zn with Co2+ ions impact both structural and magnetic properties of ZnFe2O4 nanoparticles., Spanish MINECO (MAT2016–78155-C2–1-R) and Gobierno del Principado de Asturias (GRUPIN-IDI/2018/0 0 0170) are acknowledged for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structural characterization of MgxCo3-xP2O8 solid solutions

  • Tena, M. A.
  • Mendoza-Meroño, Rafael
  • Trobajo, Camino
  • García, José R.
  • García-Granda, Santiago
Resumen del póster presentado al 25th Congress of the International Union of Crystallography (IUCr), celebrado en Praga (Rep. Checa) del 14 al 22 de agosto de 2021., Electrical, optical and magnetic properties of phosphates related in the literature made interesting the study of these materials. Specifically, many structures of phosphates are stables at high temperature. Co(II) phosphates avoid some deficiencies detected when cobalt oxides or other cobalt salts are used as raw materials in the synthesis of ceramic pigments. Cobalt violet phosphate, Co3P2O8, is included in the DCMA Classification of the Mixed Metal Oxide Inorganic Coloured Pigments (DCMA-8-11-1). Melting point in Co3P2O8 compound at 1160 ºC could be increased from the formation of solid solutions with Mg3P2O8 with melting point at 1240 ºC. The stable polymorph of Co3P2O8 compound presents Mg3P2O8 structure with monoclinic symmetry, so the formation of these solid solutions seems possible in a partial or total compositional range. Unit cell parameters are a = 5.064 Å, b = 8.371 Å, c = 8.794 Å, β = 121.01 in Co3P2O8 compound (ICSD-38259) and a = 5.077 Å, b = 8.230 Å, c = 8.833 Å, β = 120.94 in Mg3P2O8 compound (ICSD-31005). The variation of the unit cell parameters with composition will confirm the formation of these solid solutions. Structural characterization of the MgxCo3-xP2O8 compositions with temperature, position of the Co(II) absorption bands in Visible spectrum and measurement of the CIEL*a*b* colour parameters give us information about the composition and temperature in which the desired colour is developed., We gratefully acknowledge the financial support provided by Spanish Ministerio de Ciencia, Innovación y Universidades, project MAT2016-78155-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ag2O versus Cu2O in the catalytic isomerization of coordinated diaminocarbenes to formamidines: A theoretical study

  • Maelen, Juan F. van der
  • Ruiz, Javier
DFT theoretical calculations for the Ag2O-induced isomerization process of diaminocarbenes to formamidines, coordinated to Mn(I), have been carried out. The reaction mechanism found involves metalation of an N-H residue of the carbene ligand by the catalyst Ag2O and the formation of a key transition state showing a μ-η2:η2 coordination of the formamidinyl ligand between manganese and silver, which allows a translocation process of Mn(I) and silver(I) ions between the carbene carbon atom and the nitrogen atom, before the formation of the formamidine ligand is completed. Calculations carried out using Cu2O as a catalyst instead of Ag2O show a similar reaction mechanism that is thermodynamically possible, but highly unfavorable kinetically and very unlikely to be observed, which fully agrees with experimental results., This work was supported by the Spanish Ministerio de Ciencia e Innovación (Projects PID2019-109975GB-100 and MAT2016-78155-C2-1-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review on the synthesis and current and prospective applications of zirconium and titanium phosphates

  • Amghouz, Zakariae
  • García, José R.
  • Adawy, Alaa
Metal phosphates represent an important group of materials with established industrial applications that are still attracting special scientific interest, owing to their outstanding physical and chemical properties. In this review, we account on the different synthetic routes and applications of zirconium and titanium phosphates, with a special focus on their application in the medicinal field. While zirconium phosphate has been extensively studied and explored with several reported industrial and medicinal applications, especially for drug delivery applications, titanium phosphates have not yet attracted the deserved attention regarding their established applications. However, titanium phosphates have been the focus of several structural studies with their different polymorphic forms, varied chemical structures, and morphologies. These variations introduce titanium phosphates as a strong candidate for technological and, particularly, biomedical applications., This review project was funded by MINECO, grant numbers MAT2016-78155-C2-1-R and MCI-415 21-PID2020-113558RB-C41; and by the Government of the Principality of Asturias, grant number 416 GRUPIN-IDI/2018/170.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the Structure, Cytocompatibility, and Antimicrobial Efficacy of Silver-, Strontium-, and Zinc-Doped Monetite

  • Adawy, Alaa
  • Díaz, Raquel
Calcium phosphate phases are among the most widely accepted compounds for biomaterial applications, of which the resorbable phases have gained particular attention in recent years. Brushite and its anhydrous form monetite are among the most interesting resorbable calcium phosphate phases that can be applied as cements and for in situ fabrication of three-dimensional (3D) implants. Of these two dicalcium phosphate compounds, monetite is more stable and undergoes slower degradation than brushite. The purpose of the current study is to synthesize and dope monetite with the antimicrobial elements silver and zinc and the osteoinductive element strontium and investigate the possible structural variations as well as their biocompatibility and antimicrobial effectiveness. For this, powder X-ray diffraction (PXRD), energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and cryo-transmission electron microscopy (cryo-TEM) were used to thoroughly study the synthesized structures. Moreover, the ASTM E-2149-01 protocol and a cell proliferation assay were used to determine the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) and the cytocompatibility of the different phases with the Soas-2 cell line, respectively. The results confirm the successful synthesis and doping procedures, such that zinc was the most incorporated element into the monetite phase and strontium was the least incorporated element. The microbiological studies revealed that silver is a very effective antimicrobial agent at low concentrations but unsuitable at high concentrations because its cytotoxicity would prevail. On the other hand, doping the compounds with zinc led to a reasonable antimicrobial activity without compromising the biocompatibility to obviously high concentrations. The study also highlights that strontium, widely known for its osteoinductivity, bears an antimicrobial effect at high concentrations. The generated doped compounds could be beneficial for prospective studies as bone cements or for scaffold biomaterial applications., This research was funded by MINECO (Grant numbers MAT2016-78155-C2-1-R and MCI-21-PID2020-113558RBC41) and by the Government of the Principality of Asturias (Grant number GRUPIN-IDI/2018/170). The authors thank the Institute for Scientific and Technological Resources (SCTs) at the University of Oviedo; in particular, they deeply thank Marcos García-Ocaña, Biomedical and Biotechnological studies Unit, for the assistance with cell toxicity assay, and Emilio José Ariño Ariño for acquiring the PXRD patterns. Finally, A.A. expresses her deepest gratitude to N.M. Nassar for her infinite support and dedicates this work to the souls of Adawy M. Hassan and R. M. Nassar to whom she is eternally grateful.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steam Activation of Acid-Chars for Enhanced Textural Properties and Pharmaceuticals Removal

  • Hubetska, Tetiana S.
  • Mestre, Ana S.
  • Kobylinska, Natalia
  • Carvalho, Ana P.
The present work aims to explore steam activation of sisal or glucose-derived acid-chars as an alternative to KOH activation to prepare superactivated carbons, and to assess the adsorption performance of acid-chars and derived activated carbons for pharmaceuticals removal. Acid-chars were prepared from two biomass precursors (sisal and glucose) using various HSO concentrations (13.5 M, 12 M, and 9 M) and further steam-activated at increasing burn-off degrees. Selected materials were tested for the removal of ibuprofen and iopamidol from aqueous solution (kinetic and equilibrium assays) in single-solute conditions. Activated carbons prepared from acid-char carbonized with 13.5 M and 12 M HSO are mainly microporous solids composed of compact rough particles, yielding a maximum surface area and a total pore volume of 1987 m g and 0.96 cm g, respectively. Solid state NMR reveals that steam activation increased the aromaticity degree and amount of C=O functionalities. Steam activation improved the acid-chars adsorption capacity for ibuprofen from 20-65 mg g to higher than 280 mg g, leading to fast adsorption kinetics (15–20 min). The maximum adsorption capacities of selected activated samples for ibuprofen and iopamidol were 323 and 1111 mg g, respectively., The authors are grateful for financial support from Spain’s Ministry for the Economy and Business-MINECO (MAT2016-78155-C2-1-R), the Spanish Ministry of Science and Innovation (PID2020-113558RB-C41), the Government of the Principality of Asturias (AYUD/2021/50997), and also Fundação para a Ciência e a Tecnologia (FCT), I.P./MCTES through national funds (PIDDAC), to CQE (UIDB/00100/2020 and UIDP/00100/2020) and IMS (LA/P/0056/2020). This work was supported by the Erasmus+ programs 2017/2018, and 2018/2019 of Tetiana S. Hubetska at the University of Lisbon (Portugal). Ana S. Mestre thanks FCT for the Assistant Researcher contract CEECIND/01371/2017 (Embrace Project).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, vibrational properties, optical properties and Hirshfeld surface analysis of a new Bi (III) halide complex: (C2H8N)3BiBr6 for optoelectronic devices

  • Kahouli, Kaouther
  • Kharrat, A. Ben Jazia
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Khirouni, Kamel
  • Chaabouni, Slaheddine
A new organic–inorganic material, dimethylaminium hexabromobismuthate (C2H8N)3BiBr6 was elaborated by the slow evaporation technique at room temperature. This compound is synthesized and characterized by X-ray diffraction, Raman spectroscopy scattering, Hirshfeld surface analysis, 13C NMR spectroscopy, photoluminescence and by UV–Vis spectroscopy. The crystal lattice is formed by discrete [BiBr6]3− anions surrounded by dimethylaminium cations. Besides, the title compound crystallizes in the space group R 3¯¯¯ of trigonal system. The unit cell parameters are a = 29.3387(9) Å, b = 29.3387(9) Å and c = 8.4642(3) Å. The Raman and infrared spectra recorded at room temperature were interpreted by analogy with homologous materials. The cohesion of the structure is ensured by a huge network of N–H…Br hydrogen bonds and van der Waals interaction (C–H….Cl). The UV–Vis measurements, performed from 200 to 2400 nm, show a direct and wide optical bandgap evaluated at (2.840 ± 0.005), (2.482 ± 0.004) and (2.805 ± 0.006) eV by different methods. The Urbach energy presents a low value estimated at (182 ± 3) meV confirming the high quality of our compound. In addition, the evolution of the extinction coefficient (ke) and the refractive index n with the wavelength λ were determined. Furthermore, we have demonstrated that n obeys to Cauchy relation. Other optical parameters such as the skin depth and the optical conductivity were calculated, and all obtained results were discussed. We have demonstrated, in addition, that the energy losses are mainly in the bulk rather than the surface of the studied material. Based on the Wemple–Di-Domenico model, the dispersion parameters E0 and Ed relative to the (C2H8N)3BiBr6 sample were calculated. These encouraging results such as the obtained high and direct optical bandgap value prompt us to propose this compound as a basic material for optoelectronic devices., This work is supported by the “Department of Chemistry, Faculty of Sciences of Sfax, University of Sfax, BP 1171, 3038 Sfax, Tunisia,” Spanish MINECO (MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN-ID2018-170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure, Hirshfeld surfaces computational study and physicochemical characterization of the hybrid material (C7H10N)2[SnCl6]·H2O

  • Belhajsalah, Souhir
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Essalah, Khaled
  • Ben Nasr, Cherif
  • Mrad, Mohamed Habib
A novel hybrid compound, bis(4-methylanilinium)hexachlorostannate(IV) monohydrate, formulated as (C7H10N)2[SnCl6]·H2O, has been prepared and characterized by powder and single crystal X-ray diffraction (XRD), Hirshfeld surface analysis, infrared spectroscopy (IR), optical study, differential thermal analysis(DTA) and X-ray photoelectron spectroscopy analysis (XPS). The title compound crystallizes in the monoclinic space group P21/c with a = 13.093(1)Å, b = 7.093(6)Å, c = 24.152(2)Å, β = 98.536(4)⁰ and V = 2218.4(4) Å3. Their crystal structure exhibits alternating inorganic layers parallel to the (ab) plane at z = n/2. The different entities, [SnCl6]2-, organic cations and water molecules, are connected via hydrogen bonds to form a three-dimensional network. The powder XRD data confirms the phase purity of the crystalline sample. The intermolecular interactions were investigated by Hirshfeld surfaces. The vibrational absorption bands were identified by IR spectroscopy and have been discussed. The optical properties of the crystal were studied by using optical absorption, UV–visible absorption and photoluminescence spectroscopy studies. The compound was also characterized by DTA to determine its thermal behavior with respect to the temperature. Finally, XPS technique is reported for analyzing the surface chemistry of this compound., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias, Spain (GRUPIN14-060), FEDER, and the Secretary of State for Scientific Research and Technology of Tunisia, are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective anticancer activities of an acyclic symmetrical compartmental Schiff base ligand and its Co(II), Cu(II) and Zn(II) complexes against the human leukemia cell line K562

  • Saghatforoush, Lotfali
  • Moeini, Keyvan
  • Hosseini-Yazdi, Seyed Abolfazl
  • Mardani, Zahra
  • Bakhtiari, Akbar
  • Hajabbas-Farshchi, Alireza
  • Honarvar, Soghra
  • Abdelbaky, Mohammed S. M.
Syntheses of new N2O5 donor type compartmental Schiff base ligand, 2,2′-((((((2-hydroxypropane-1,3-diyl)bis(oxy))bis(2,1-phenylene))bis(methylene))bis(azanylylidene))bis(methanylylidene))bis(4-nitrophenol) (H3L) and its cobalt(II), copper(II) and zinc(II) complexes, [Co(HL)] (1), [Cu2(L)(μ-1,3-OAc)] (2) and [Zn(HL)] (3), are reported. The synthesized compounds were characterized by elemental analysis, FT-IR, 1H and 13C NMR spectroscopies and X-ray single-crystal diffraction. In the structure of 1 and 3, the metal ion has a N2O2 coordination environment with tetrahedral geometry. Compound 2 is a binuclear complex, in which copper ions are bonded by NO4 donor atoms set in square planar coordination geometry. The ability of all compounds to interact with ten selected biomacromolecules (BRAF kinase, CatB, DNA gyrase, HDAC7, rHA, RNR, TrxR, TS, Top II and B-DNA) are investigated by the docking calculations. In continue, the in vitro activities of all compounds against the human leukemia cell line K562 were investigated by evaluation of IC50 values and mode of cell death (apoptosis). The experiments revealed that the cytotoxicity of the studied complexes is higher than or comparable with cisplatin., We acknowledge the financial support from the Council of the Payame Noor University, Iran and Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.) and FEDER funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of substituents on partial photocatalytic oxidation of aromatic alcohols assisted by polymeric C3N4

  • Krivtsov, Igor V.
  • Ilkaeva, Marina
  • García-López, Elisa I.
  • Marcì, Giuseppe
  • Palmisano, Leonardo
  • Bartashevich, Ekaterina V.
  • Matveeva, Olga G.
  • Díaz, Eva
  • Ordóñez, Salvador
In the present work we scrutinize the effect of substituents in the phenyl ring of the benzyl alcohol on its photo-oxidation to the corresponding benzaldehyde driven by polymeric carbon nitride photocatalyst in aqueous medium. It has been established that electron donating (ED) substituents in para- and ortho-position with respect to the CH2OH-group promote the reactivity of the substrate without compromising the selectivity towards benzaldehyde formation, maintaining it in the range of 84–98 %, if compared to the unsubstituted molecule. The same observation is true for meta-substituted benzyl alcohol with an electron withdrawing (EW) group. On the other hand, the presence of ED-group in meta-position or EW-group in para-position with respect to the CH2OH-group reduces the reactivity as well as the selectivity towards the aldehyde production, resulting in the values of selectivity ranging from 40 to 80 %. Quantum chemical calculations have allowed to establish that the reactivity correlates with the positive charge on the benzylic carbon in benzyl alcohol cation intermediate, while the selectivity, most probably, is conditioned by a negative charge on the carbon atoms in the phenyl ring being a target for an electrophile attack. The modification of the polymeric C3N4 photocatalyst with H2O2 reduces the unselective benzyl alcohol oxidation, thus favouring the higher selectivity towards benzaldehyde production., This work is supported by Spanish MINECO ( MAT2016-78155-C2-1-R; CTQ2017-89443-C3-2-R) and Gobierno del Principado de Asturias (GRUPIN-ID2018-170; GRUPIN-ID2018-116). Theoretical modelling supported by the grants of Ministry of Education and Science of the Russian Federation No 4.1157.2017/4.6. IK acknowledges financial support from Ministry of Education and Science of the Russian Federation (grant No 4.9722.2017/8.9)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From a PGeP pincer-type germylene to metal complexes featuring chelating (Ir) and tripodal (Ir) PGeP germyl and bridging (Mn2) and chelating (Ru) PGeP germylene ligands

  • Brugos, Javier
  • Cabeza, Javier A.
  • García-Álvarez, Pablo
  • Pérez-Carreño, Enrique
Different coordination modes of a PGeP chloridogermyl ligand (Ge,P-chelating and P,Ge,P-tripodal) and a PGeP germylene ligand (P,Ge,P-bridging and Ge,P-chelating) have been identified in coordination compounds resulting from reactions of the PGeP pincer-type diphosphane-germylene Ge(NCH2PtBu2)2C6H4 (1) with iridium(I), manganese(0), and ruthenium(II) complex reagents. Germylene 1 reacted with [Ir2(μ-Cl)2(η4-cod)2] (cod = 1,5-cyclooctadiene) to give [Ir{κ2Ge,P-GeCl(NCH2PtBu2)2C6H4}(η4-cod)] (2), which contains a Ge,P-chelating PGeP chloridogermyl ligand and an uncoordinated phosphane group that weakly interacts with the Ge atom. Carbon monoxide readily displaced the cod ligand of 2 to give the dicarbonyl derivative [Ir{κ3P,Ge,P-GeCl(NCH2PtBu2)2C6H4}(CO)2] (3), in which the PGeP chloridogermyl ligand displays a P,Ge,P-tripodal coordination mode. A bridging germylene moiety has been identified in the binuclear derivative [Mn2{μ-κ3P,Ge,P-Ge(NCH2PtBu2)2C6H4}(CO)8] (4), which resulted from the treatment of [Mn2(CO)10] with germylene 1. The ruthenium complex [RuHCl(CO){κ2Ge,P-Ge(NCH2PtBu2)2C6H4}(PiPr3)] (5), which was isolated from the reaction of 1 with [RuHCl(CO)(PiPr3)2], is the first transition-metal derivative of 1 in which the germylene moiety has not inserted into an M–M or M–Cl bond (M = transition metal), as it contains germylene 1 coordinated in a Ge,P-chelating mode, the resulting GeNCPRu ring being severely strained due to the short length of the coordinated CH2PtBu2 arm, which also forces the germanium atom to be in an uncommon T-shaped environment. DFT calculations have been used to shed light on bonding features of complexes 2 and 5. The X-ray structures of 1–5 are also reported., This work has been supported by MINECO-FEDER (CTQ2016-75218-P, MAT2016-78155-C2-1-R, RYC2012-10491, and CTQ2016-81797-REDC) and Gobierno del Principado de Asturias (GRUPIN14-009 and GRUPIN14-060) research grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrophobically functionalised magnetic nanocomposite as a new adsorbent for pre-concentration of organochlorine pesticides in water solution

  • Hubetska, Tetiana S.
  • Krivtsov, Igor V.
  • Kobylinska, Natalia
  • García, José R.
Magnetite (Fe 3 O 4 ) nanoparticles modified with a nonionic surfactant, Triton X-100, have been applied for magnetic solid-phase extraction of organochlorine pesticides (OCPs) from a water medium. The magnetic core-shell nanoparticles decorated with layers of silica and Triton X-100 have been prepared through a step-by-step technique. The synthesized materials were thoroughly characterized using transmission electron microscopy, powder X-ray diffraction analysis, nitrogen physisorption, elemental analysis, and vibrating sample magnetometry. The synthesized solids were tested for the preconcentration of OCPs present in water for their subsequent analysis by gas chromatography coupled with mass spectrometry. The proposed method has demonstrated a good linearity (R 2 > 0.9915) in the range of 1-10 000 ng·kg -1 , with a relative standard deviation of less than 11.7%. The preconcentration factors obtained under the optimal conditions were in the range of 2362-10593 for 100 mL of sample solution., This study was supported by grants from EU FP-7-PEOPLE-2009-IRSES (№ 247603). University of Oviedo thanks for financial support Spanish MINECO (MAT2016-78155-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metastable phase in binary and ternary 12-carat gold alloys at low temperature

  • Lamiri, Imene
  • Abdelbaky, Mohammed S. M.
  • Hamana, Djamel
  • García-Granda, Santiago
Low temperature phase transitions in 12-carat gold alloys have been investigated for binary Au-Cu and ternary Au-Cu-Ag compositions. The thermal analyses investigations using differential scanning calorimetry (DSC) and the dilatometry were performed in the 50–300 °C temperature range in order to detect the structural transformations. The thermal analyses were carried out on annealed samples at 700 °C for two hour followed by water quenching. They reveal an important new reaction for both used compositions and both thermal techniques confirm each other. This reaction has been assessed as pre-ordering reaction. SEM and STM imaging were performed on annealed samples at 700 °C for two hours and water quenched followed by a heating from room temperature up to the temperature of the new peaks obtained in the thermal study. The imaging reveals the relationship between the pre-ordering reaction and the surface aspect presented in the fact of dendrite precipitates. A series of SEM observation have been performed in order to follow the kinetic of the observed precipitates by the way of several series of heating up, from 140 to 220 °C for the binary composition and from 100 to 180 °C for the ternary composition. Furthermore, this study shows that the silver accelerates the ordering reaction., Financial support from the Algerian Ministry of Higher Education and Scientific Research (PNE scholarship), Spanish Ministerio de Economía y Competitividad (MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.) and Gobierno del Principado de Asturias (GRUPIN14-060) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microporous composite SiO2-TiO2 spheres prepared via the peroxo route: Lead(II) removal in aqueous media

  • Morozov, Roman
  • Krivtsov, Igor V.
  • Avdin, Viacheslav
  • Amghouz, Zakariae
  • Gorshkov, Alexander
  • Pushkova, Ekaterina
  • Bol'shakov, Oleg
  • Bulanova, Aleksandra
  • Ilkaeva, Marina
Composite microporous SiO2-TiO2 spheres and micro/mesoporous TiO2 spheres were prepared via the template-free two-step synthetic route using aqueous peroxotitanate solution and tetraethyl orthosilicate (TEOS) as precursors. Both the composite SiO2-TiO2 and pure TiO2 spheres prepared by the solvent-exchange method were initially non-porous, but the applied reflux treatment in water-ethanol suspension successfully transformed them into microporous materials with high apparent surface areas approaching 500 m2·g− 1 and the micropore volume of 0.17 cm3·g− 1, while maintaining the same morphology. The prepared composites retained high values of pore volume and specific surface area up to 400 °C of thermal treatment temperature. The crystallization of TiO2 into the anatase phase in the mixed oxide occurred only at 700 °C, that process was also accompanied by the significant reduction of pore volume, as well as apparent surface area values. The prepared materials were tested as adsorbents for the lead(II) removal; they demonstrated high adsorption capacities, reaching 340 mg(Pb2 +)·g− 1. Moreover, the mixed silica-titania oxide was found to be more efficient adsorbent at low pH values., South Ural State University is grateful for financial support of the Ministry of Education and Science of the Russian Federation (grant No 16.2674.2014/K). University of Oviedo gratefully acknowledges financial support from the Spanish MINECO (MAT2013-40950-R and MAT2016-78155-C2-1-R). Igor Krivtsov thanks for the support the Russian Foundation for Basic Research 16-29-10757-ofi., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective photocatalytic oxidation of 5-hydroxymethyl-2-furfural in aqueous suspension of polymeric carbon nitride and its adduct with H2O2 in a solar pilot plant

  • Ilkaeva, Marina
  • Krivtsov, Igor V.
  • García, José R.
  • Díaz, Eva
  • Ordóñez, Salvador
  • García-López, Elisa I.
  • Marcì, Giuseppe
  • Palmisano, Leonardo
  • Maldonado, M. Ignacio
  • Malato, Sixto
This work reports a study on the reactivity of polymeric carbon nitride (PCN) and PCN-H2O2 adduct samples for sunlight photocatalytic selective oxidation reactions. The characterization of these materials was reported in a previous paper where the reactivity towards the partial oxidation of 5-hydroxymethylfurfural (HMF) was studied by using two different laboratory scale photoreactors; one irradiated by UV lamps and the other one by natural sunlight. In the present study it has been confirmed the effectiveness of these C3N4 based materials for the selective partial oxidation of HMF to FDC (2,5-furandicarboxaldehyde) in aqueous medium in a pilot plant photoreactor irradiated by natural sunlight. The reactivity results and, in particular, the selectivity to FDC formation have been very encouraging, mostly by considering that the reaction was carried out in water. Moreover, they are comparable with those obtained in the laboratory scale photoreactors irradiated by both UV lamps and natural sunlight. Interestingly, the pristine PCN sample has shown a higher HMF conversion with respect to that of the PCN-H2O2 adduct, but the last one is more selective to the FDC formation. A kinetic study indicates that the pseudo-first-order rate constant of HMF oxidation is higher in the case of pristine photocatalyst and that the equilibrium adsorption constants of HMF is higher in the case of PCN-H2O2 adduct catalyst. Finally, the partial oxidation of two aromatic alcohols, i.e. benzyl alcohol (BA) and 4-methoxy benzyl alcohol (4-MBA) to benzaldehyde (BAL) and 4-methoxy benzaldehyde (4-MBAL), respectively, has also been studied., Authors wish to thank CIEMAT-PSA and European Commission for the funding in the framework of the EU-DG RTD’s project: SFERA II contract no. 312643. University of Oviedo acknowledges the financial support from Spanish MINECO (MAT2013-40950-R, CTQ2014-52956-C3-1-R and MAT2016-78155-C2-1-R) and Gobierno del Principado de Asturias (GRUPIN14-060, GRUPIN14-078 and Severo Ochoa PhD grant BP-14-029 to MI). IK thanks for the support the Ministry of Education and Science of the Russian Federation (grant no. 4.9722.2017/8.9)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective photocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxaldehyde by polymeric carbon nitride-hydrogen peroxide adduct

  • Ilkaeva, Marina
  • Krivtsov, Igor V.
  • García-López, Elisa I.
  • Marcì, Giuseppe
  • Khainakova, Olena A.
  • García, José R.
  • Palmisano, Leonardo
  • Díaz, Eva
  • Ordóñez, Salvador
Polymeric carbon nitride-hydrogen peroxide adduct (PCN-H2O2) has been prepared, thoroughly characterised and its application for selective photocatalytic conversion of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxaldehyde (FDC) in aqueous suspension has been studied. The PCN-H2O2 adduct is stable in aqueous suspension under UV and solar irradiation up to 100 °C. It is also stable up to 200 °C if heated in air, while at temperatures close to 300 °C its decomposition takes place. Based on the obtained characterisation data it has been proposed that H2O2 attaches to the non-polymerised carbon nitride species and to the heptazine nitrogen atoms, thus producing strong hydrogen bonding within the PCN-H2O2 adduct. The blockage of the surface amino-groups in PCN-H2O2 by H2O2 hinders the interaction of HMF with these sites, which are responsible for unselective substrate conversion. PCN-H2O2, although being less active, possesses a superior selectivity in natural solar light assisted oxidation of HMF to FDC reaching 80% with respect to its thermally etched PCN counterpart, which gives rise to a 40–50% selectivity. We believe that the exceptional performance of the applied photocatalyst in the selective photocatalytic conversion of HMF to a high added value FDC in a green solvent under natural illumination makes a significant contribution to the development of environmentally friendly technologies for biomass valorisation., We gratefully acknowledge financial support from the Spanish MINECO (MAT2013-40950-R, MAT2016-78155-C2-1-R, CTQ2014-52956-C3-1-R, and Severo Ochoa PhD grant BP-14-029 to M.I.) and FEDER. IK acknowledges financial support from Ministry of Education and Science of the Russian Federation (grant No. 4.9722.2017/8.9) and grateful for the support by Act 211 Government of the Russian Federation, contract No. 02.A03.21.0011., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective photocatalytic oxidation of aromatic alcohols in water by using P-doped g-C3N4

  • Bellardita, Marianna
  • García-López, Elisa I.
  • Marcì, Giuseppe
  • Krivtsov, Igor V.
  • García, José R.
  • Palmisano, Leonardo
A set of bare and P-doped graphitic carbon nitride (g-C3N4) photocatalysts has been prepared by thermal condensation of melamine, urea or thiourea. For the sake of comparison, a g-C3N4 sample obtained in the presence of cyanuric acid and thermally exfoliated C3N4 powders were also studied. The materials were physicochemically characterized and their photocatalytic activity was studied for the selective oxidation of benzyl alcohol (BA), 4-methoxy benzyl alcohol (4-MBA) and piperonyl alcohol (PA) in water suspension both under UV and visible light irradiation. The influence of the type and position of the substituents on conversion and selectivity to aldehyde was remarkable. The presence of P in the C3N4 material improved the selectivity of the reaction towards the aldehyde., University of Oviedo thanks for financial support Spanish MINECO (MAT2013-40950-R, CTQ2014-52956-C3-1-R and MAT2016-78155-C2-1-R) grants. I.K. is grateful for financial support of the Ministry of Education and Science of the Russian Federation (grant No 4.9722.2017/8.9)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sev and pcu topological nets in one-pot newly synthesized mixed-ligand imidazole-containing Cu(II) coordination frameworks: Crystal structure, intermolecular interactions, theoretical calculations, magnetic behavior and biological activity

  • Direm, Amani
  • Abdelbaky, Mohammed S. M.
  • Sayin, Koray
  • Cornia, Andrea
  • Abosede, Olufunso
  • García-Granda, Santiago
Novel mixed-ligand coordination frameworks, occurring concomitantly namely [Cu(Im)3(H2Cit)] (1) and [Cu(Im)2(HCit)]·HIm (2) (with Im = imidazole and H4Cit = citric acid) were obtained as a result of the one-pot reaction between imidazole, citric acid and copper chloride. The complexes were structurally characterized by elemental analysis, FTIR spectroscopy and X-ray diffraction. The two structures were found to be connected through 3D hydrogen-bonding networks examined by means of the Hirshfeld surface analysis which highlighted the presence of O–H⋯O, N–H⋯O and C–H⋯O H-bonds together with the π⋯lp interactions. A topological analysis of the underlying nets corresponding to the two hydrogen-bonded frameworks was carried out. Moreover, quantum chemical calculations were performed using the HF method with 6-31G(d) and LANL2DZ levels in the gas phase, and therefore the optimized structures, the IR, 1H NMR, 13C NMR spectra and the electronic structure descriptors were examined in detail. Furthermore, the magnetic properties of (1) and (2) were also investigated. The complexes showed remarkable antimicrobial and antifungal inhibition activities., The financial support from Université Abbes Laghrour Khenchela (Algeria), TUBITAK ULAKBIM, High Performance and Grid Computing Center (TRUBA Resources, Turkey), Spanish MINECO MAT2016-78155-C2-1-R, FPI grant BES-2011-046948 to MSM.A., Gobierno del Principado de Asturias (GRUPIN14-060) and FEDER are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure and characterization of a new organic-inorganic hybrid material 4-(ammonium methyl) pipyridinium hexachloro stanate (II) trihydrate

  • Lassoued, Mohamed Saber
  • Abdelbaky, Mohammed S. M.
  • Lassoued, Abdelmajid
  • Ammar, Salah
  • Gadri, Abdellatif
  • Ben Salah, Abdelhamid
  • García-Granda, Santiago
The present paper undertakes the study of (C6H16N2) SnCl6·3H2O which is a new hybrid compound. It was prepared and characterized by single crystal X-ray diffraction, X-ray powder, Hirshfeld surface, Spectroscopy measurement, thermal study and photoluminescence properties. The single crystal X-ray diffraction studies revealed that the compound crystallizes in monoclinic Cc space group with cell parameters a = 8.3309(9) Å, b = 22.956(2) Å, c = 9.8381(9) Å, β = 101.334(9) ° and Z = 4. The atomic arrangement shows an alternation of organic and inorganic entities. The cohesion between these entities is performed via Nsingle bondH⋯Cl, Nsingle bondH⋯O, Osingle bondH⋯Cl and Osingle bondH⋯O hydrogen bonding to form a three-dimensional network. Hirshfeld surface analysis was used to investigate intermolecular interactions, as well 2D finger plots were conducted to reveal the contribution of these interactions in the crystal structure quantitatively. The X-ray powder is in agreement with the X-ray structure. Scanning electron microscope (SEM) was carried out. Furthermore, the room temperature infrared (IR) spectrum of the title compound was recorded and analyzed on the basis of data found in the literature. Solid state 13C NMR spectrum shows four signals, confirming the solid state structure determined by X-ray diffraction. Besides, the thermal analysis studies were performed, but no phase transition was found in the temperature range between 30 and 450 °C. The optical and PL properties of the compound were investigated in the solid state at room temperature and exhibited three bands at 348 and 401 cm−1 and a strong fluorescence at 480 nm., Financial support from Faculty of Science in University of Gabes, Tunisia, Spanish Ministerio de Economía y Competitividad (MINECO-17- MAT2016-78155-C2-1-R, and FPI grant BES-2011-046948 to MSM.A.) and Gobierno del Principado de Asturias (GRUPIN14-060) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, characterizations and magnetic study of a novel two-dimensional iron fluoride

  • Bouketaya, Sabrine
  • Smida, Mouna
  • Abdelbaky, Mohammed S. M.
  • Dammak, Mohamed
  • García-Granda, Santiago
A new hybrid compound formulated as [Fe3F8(H2O)2](Am2TAZ)2 (Am2TAZ= 3,5-diamino-1,2,4-triazole) was prepared under hydrothermal conditions. The crystal structure was solved by single-crystal X-ray diffraction and the bulk was characterized by thermal analyses (TG-MS), vibrational spectroscopy (FTIR, Raman), Ultraviolet-visible spectroscopy (UV–Vis), and scanning electron microscopy (SEM-EDX). It crystallizes in the triclinic system space group P1̅ ̅with unit cell parameters a= 7.100(2) Å, b= 7.658(2) Å, c= 8.321(2) Å, α = 107.330(20)°, β = 111.842(18)°, γ = 93.049(17)°, Z = 1 and V= 394.01(17) Å3. The studied X-ray crystal structure shows the two oxidation states for iron atoms (Fe2+, Fe3+) and generates a 2D inorganic network, built up of inorganic layers constructed from infinite inorganic chains running along a axis. In fact, these chains are connected via (Fe3+(3)F6) octahedral. OW-H…F and N-H…F hydrogen bonds, making up the whole 3D network, are strongly linked in the layers. Magnetization measurements were performed, exhibiting the paramagnetic feature of the studied compound above 150 K., We acknowledge financial support from the Ministry of Higher Education and Scientific Research of Tunisia and Spanish Ministerio de Economía y Competitividad (MAT2016–78155-C2-1-R and FPI grant BES-2011–046948 to MSM.A.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, DFT (B3LYP/LanL2DZ) and photoluminescence study of new stanate (IV) based inorganic-organic hybrid

  • Lassoued, Mohamed Saber
  • Osman, Hussien H.
  • Abdelbaky, Mohammed S. M.
  • Lassoued, Abdelmajid
  • Ammar, Salah
  • Ben Salah, Abdelhamid
  • Gadri, Abdellatif
  • García-Granda, Santiago
A novel interesting metal hybrid compound, named as hexachlorostanate (II) 4.4′ bipyridinium and formulated as (C10H10N2) SnCl6, was synthesized at room temperature by slow evaporation and then characterized by a single X-ray diffraction, spectroscopic measurements, Scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence technique. It crystallizes in the space group C2/c with the following unit cell parameters: a = 17.9611 (13) Å, b = 12.9274 (5) Å, c = 7.6305 (6) Å and β = 117.860 (10) °. The structure can be described by the alternation of two different cationic-anionic layers. It consists of isolated [SnCl6]2- octahedral anions and 4.4′ bipyridinium (C10H10N2) cations, which are connected via N-H⋯Cl hydrogen bonds forming a chain network. The Hirshfeld surface analysis was conducted to investigate intermolecular interactions and associated 2D fingerprint plots, revealing the relative contribution of these interactions in the crystal structure quantitatively. The optimized geometric parameters, normal mode frequencies and corresponding vibrational assignments of the present compound were theoretically examined by the DFT/B3LYP method with the LanL2DZ basis set. The X-ray powder is in agreement with the X-ray structure. 13C NMR spectrum shows three signals, confirming the solid state structure determined by X-ray diffraction. Photoluminescence measurements showed a strong emission line at 2.95 eV associated with radiative recombinations of excitons confined within the [SnCl6]2- which were investigated at room temperature., Financial support from Faculty of Science in University of Gabes, Tunisia, Spanish Ministerio de Economía y Competitividad(MAT2016-78155-C2-1-R and FPI grant BES-2011-046948 to MSM.A.) and Gobierno del Principado deAsturias (GRUPIN14-060).are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, vibrational and optical properties of a new Pb(II) complex (2-hydroxyethyl)piperazine-1,4-diium tetrachloroplombate(II) C6H16N2OPbCl4

  • Mrad, Mohamed Habib
  • Feddaoui, Imen
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Ben Nasr, Cherif
A novel hybrid material, C6H16N2OPbCl4, has been successfully synthesized in nitrogen atmosphere by slow evaporation at room temperature. The compound structure was determined by single-crystal X–ray diffraction and crystallizes in the triclinic space group P-1 (a  =  5.9926(2) Å, b  =  10.3691(5) Å, c  =  11.3558(4) Å, α = 111.755(4)°, β = 96.080(3)°, γ = 105.948(4)°, Z = 2) at 293 K. The structure is built up from anionic 1-D polymeric chains of PbCl4O octahedral extended along the (b + c)-axis. These chains are interconnected by Osingle bondH⋯Cl hydrogen bonds to form inorganic layers parallel to (a, b + c) plane. The organic layers are inserted between the inorganic ones and connect them through Nsingle bondH⋯Cl and Csingle bondH⋯Cl hydrogen bonds to build a three dimensional network. To gain more information about intermolecular interaction we used Hirshfeld surfaces associated with 2D finger plots. The optical and PL properties of the compound were investigated in the solid state at room temperature and exhibited two bands at 250 and 290 nm and a photoluminescence emission at 529 nm. Raman and infrared spectra were used to gain more information for vibrational modes of the title compound. As for thermal analysis, DSC analysis shows that this compound is stable at temperature below melting point. Finally, XPS analysis is achieved for analyzing the surface chemistry of C6H16N2OPbCl4 crystals., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), GobiernodelPrincipado de Asturias (GRUPIN14-060), FEDER, and the Secretary of State for Scientific Research and Technology of Tunisia, are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, vibrational, optical properties, and a theoretical study of a new Pb(II) complex with bis(1-methylpiperazine-1,4-diium): [C5H14N2]2PbCl6·3H2O

  • Mrad, Mohamed Habib
  • Belhajsalah, Souhir
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Essalah, Khaled
  • Ben Nasr, Cherif
An investigation of the solid-state X-ray structure of the new organic–inorganic compound [C5H14N2]2PbCl6·3H2O shows a layered organization of the (PbCl6)4– anions, with (R2NH2)+ groups and water molecules developed in the [Citation001] plane at x = (2n + 1)/4. The crystal structure is stabilized by N − H···Cl, N − H···O, O − H···Cl, O − H···O, and C − H···Cl hydrogen bonds. The powder X-ray diffraction and X-ray photoelectron spectroscopic (XPS) analyses confirm the phase purity of the crystal sample. The intermolecular contacts are quantified using the Hirshfeld surfaces computational method. The major inter-contacts contributing to the Hirshfeld surfaces are H…Cl, H…H, and O…H. The vibrational modes were identified and assigned by IR and Raman spectroscopies. The optical properties were investigated by UV–visible and photoluminescence spectroscopic studies. The compound was characterized by thermal analysis to determine its thermal behavior with respect to the temperature. Finally, X-ray photoelectron spectroscopy analysis is reported for analyzing the surface chemistry of [C5H14N2]2PbCl6·3H2O., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to M.S.M.A.), GobiernodelPrincipado de Asturias (GRUPIN14-060), FEDER, and the Secretary of State for Scientific Research and Technology of Tunisia, are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure, vibrational, optical properties, thermal analysis and theoretical study of a new Sn(IV) complex (C5H14N2)2[SnCl6]2·5H2O

  • Belhajsalah, Souhir
  • Abdelbaky, Mohammed S. M.
  • García-Granda, Santiago
  • Essalah, Khaled
  • Ben Nasr, Cherif
  • Mrad, Mohamed Habib
In this study, a new organic-inorganic hybrid metal compound (C5H14N2)2[SnCl6]2·5H2O was crystallized at room temperature in the orthorhombic system (space group P21 21 21) where the structure is determined by single crystal X-ray diffraction analysis. The examination of the structure shows the cohesion and stability of the atomic arrangement result from the establishment of N—H⋯Cl, O(W)—H(W)⋯Cl, N—H⋯O(W) and O(W)—H(W)⋯O(W) hydrogen bonds between 1-methylpiperazine-1,4-diium (C5H14N2)2+cations, isolated (SnCl6)2– anions and water molecules to form organic and inorganic layers parallel to the (a, c) plane and alternate along the b-axis. Hirshfeld surface analysis was used to investigate intermolecular interactions, as well 2D fingerprint plots were conducted to reveal the contribution of these interactions in the crystal structure quantitatively. The solid phase FTIR and FT-Raman spectra of this compound have been recorded in the regions 400–4000 and 100–500 cm−1, respectively. The vibrational frequencies were also predicted from the calculated intensities by DFT method and were compared with the experimental frequencies, which yield good agreement between observed and calculated frequencies. Besides, the optical proprieties were investigated by UV-visible and photoluminescence spectroscopy studies in the region 200–700 nm and the electronic properties HOMO and LUMO energies were measured by TD-DFT approach. Moreover, this compound was characterized by thermal analysis between 300 and 500 K which revealing two phase transitions. Finally, X-ray photoelectron spectroscopy (XPS) analysis is reported to determine the degree of oxidation of tin in this compound and analyzing the surface chemistry of (C5H14N2)2[SnCl6]2·5H2O., Financial support from Spanish MINECO (MAT2016-78155-C2-1-R, MAT2013-40950-R, and FPI grant BES-2011-046948 to MSM.A.), Gobierno del Principado de Asturias (GRUPIN14-060), FEDER, and the Secretary of State for Scientific Research and Technology of Tunisia, are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal behavior of layered alpha-titanium phosphates: from the titanium(IV) bis(hydrogenphosphate) monohydrate to an europium(III)-phase via propylamine intercalation

  • García-Glez, Jorge
  • Khainakova, Olena A.
  • Iglesias, Isabel
  • Alfonso, Belén F.
  • Huidobro, José A.
  • Amghouz, Zakariae
  • Espina, Aránzazu
  • Trobajo, Camino
Polycrystalline layered α-titanium phosphate, α-Ti(HPO4)2·H2O, has been obtained under H3PO4(aq) reflux conditions, and its intercalation compound with propylamine, α-Ti(HPO4)2·2C3H7NH2·H2O, was used for trapping luminescent Eu-centers in two-dimensional confined space. All materials were characterized by X-ray powder diffraction, scanning electron microscopy, solid-state nuclear magnetic resonance (SS-NMR, 31P MAS and 13C CPMAS) and thermogravimetric analysis coupled with mass spectrometry. Moreover, the activation energy of thermal decomposition has been calculated as a function of the extent of conversion, applying both a modified Friedman method developed in our laboratory and the advanced nonlinear method proposed by Vyazovkin., This work is supported by “Ministerio de Economía y Competitividad” (MAT2016-78155-C2-1-R, MAT2013-40950-R, MAT2011-27573-C04-02), “Gobierno del Principado de Asturias” (GRUPIN14-060), and FEDER., Peer reviewed