Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Erbium-doped fiber ring cavity for the measurement of refractive index variations

  • Pérez Herrera, Rosa Ana
  • Soares, Liliana
  • Novais, Susana
  • Frazão, Orlando
  • Silva, Susana
In this work, an erbium-doped fiber ring cavity based on a 3dB optical coupler for refractive index measurements is presented and experimentally verified. This interrogation system, based on a 1 x 2 optical coupler, uses one of these output ports to increase the reflected optical power by means of a fiber Bragg Grating (FBG), used as a reflector. Moreover, the other output port is used as a refractive index sensing head. A spectral analysis of this interrogator system as well as a fiber cavity ring refractive index sensor characterization are carried out. Finally, an experimental comparison of the refractive index sensor range when the 3dB coupler is replace by a 1x3 one is also presented., This work is financed by the program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Universidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021-130378B-C22 funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR; and National Funds through the Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia, within project UIDB/50014/2020 and FCT, Portugal through the Grant 2020.05297.BD
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Compensation of phase noise impairments in distributed acoustic sensors based on optical pulse compression time-domain reflectometry

  • Piñeiro Ben, Enrique
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We introduce a method to compensate for the deleterious effects of the phase noise of the laser source on long-range distributed acoustic sensors (DAS) that implement optical pulse compression (OPC). Pulse compression can be used in coherent optical time-domain reflectometry (COTDR) sensors to extend the measurement range without compromising spatial resolution. In fact, OPC-COTDR sensors have demonstrated the longest measurement range to date in passive sensing links that do not require distributed amplification to compensate fiber attenuation. However, it has been found that the limited coherence of the laser source has a degrading effect on the actual performance enhancement that pulse compression can bring because it constrains the maximum duration of the compression waveforms that can be used and makes the use of lasers with extremely low phase noise necessary.We introduce a technique to compensate for the effects of phase noise on OPC-COTDR sensors so that they can demonstrate their full potential for long-range measurements using lasers with less stringent phase noise requirements. The method is based on sampling the phase noise of the laser with an auxiliary interferometer and using this information in a simple signal processing technique to mitigate its deleterious effect on the signal measured. We test our method in an OPCCOTDR sensor that uses 500-μs linear frequency modulated pulses to demonstrate 100-km range measurements with 200 p/√Hz of strain sensitivity at 2-m initial spatial resolution that becomes 10-m after applying the gauge length. To our knowledge, this is the longest compression waveform demonstrated to date in an OPCCOTDR sensor. Its use provides an extra 20-km range compared to previous demonstrations using laser sources of comparable linewidth. Furthermore, comparable performance is also demonstrated when using a laser source with an order of magnitude larger linewidth., This work was supported in part by European Union “Next generationEU”/PRTR and MCIN/AEI/10.13039/501100011033 under grant PDC2021-121172-C21, in part by FEDER “A way to make Europe” and MCIN/AEI/10.13039/501100011033 under Grant PID2019-107270RB-C22, and in part by the Gobierno de Navarra under Grant PC210-211 FIBRATRAFIC.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

C and L band fiber lasers enhanced by ultrafast laser inscribed artificial backscatter reflectors

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Sánchez González, Arturo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
This letter presents an experimental comparison between two linear-cavity erbiumdoped fiber lasers (EDFL) assisted by two different artificial backscatter fiber-based reflectors. Both reflectors were inscribed by femtosecond laser direct writing, one of them within a single-mode fiber (SMF) and the other one within a multi-mode fiber (MMF). Although the erbium-doped fiber amplifier (EDFA) used in both structures was the same and both reflectors were manufactured under the same parameters, the reflection spectrum of each was clearly different due to their different physical properties. The first linear-cavity EDFL, consisting of an SMF-based reflector with 9µm core and 125µm cladding, resulted in a single laser emission line located in the C-band and centered at 1564.4 nm, exhibiting an optical signal-to-noise ratio (OSNR) of 52dB when pumped at 100mW. On the other hand, a single laser emission line with a similar OSNR but in L-band (centered at 1574.5nm) was obtained when using an MMF-based reflector with 50µm core and 125µm cladding., Ministerio de Educacion, Cultura y Deporte (PhD grant FPU2018/02797); European Commission (Next generation EU/PTR); FEDER (A way to make Europe); MCIN/AEI/10.13039/501100011033 (PDC2021-121172-C21, PID2019-107270RB).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Micro-displacement sensor based on hollow core fiber interferometers

  • Sánchez González, Arturo
  • Rodríguez Rodríguez, Armando
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
An interferometric sensor based on hollow core fibers for the measurement of micro-displacement has been designed. Its characterization has resulted in a linear response, suggesting its application in pressure sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generationEU"/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Development of a water flow and velocity optical fiber sensor for field testing

  • Rodríguez Rodríguez, Armando
  • Urroz Unzueta, José Carlos
  • Diéguez Elizondo, Pedro
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Rodríguez, José Javier
A water flow and velocity fiber optic sensor system was developed and tested. The sensing head was especially developed and ruggedized to measure velocities at different depths, in order to calculate the discharge in channels., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generation EU"/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo de láseres de fibra óptica con aplicación en sistemas de sensores, Development of optical fiber lasers for sensing applications

  • Sánchez González, Arturo
Esta tesis presenta el desarrollo y análisis de distintas tecnologías fotónicas basadas en fibra óptica para la monitorización de magnitudes físicas, con énfasis en configuraciones tanto puntuales como cuasidistribuidas. El trabajo se organiza en torno a tres bloques principales que abordan, de forma progresiva, desde el diseño de fuentes láser hasta técnicas avanzadas de interrogación y monitorización estructural. El primer bloque se centra en el estudio de láseres aleatorios de fibra óptica coherentes, fabricados a partir de reflectores pseudoaleatorios inscritos mediante láser de femtosegundo. Se desarrollan diferentes configuraciones orientadas a mejorar la estabilidad espectral, lograr operación en modo longitudinal único y extender la emisión a bandas C y L. Asimismo, se analiza su funcionalidad como sensores multiparamétricos, destacando su capacidad para la discriminación simultánea de temperatura y deformación mediante fuentes multilínea. El segundo bloque examina sensores ópticos interferométricos construidos con fibras de núcleo hueco, en los que se propone una estrategia alternativa de interrogación basada en la transformación espectral al dominio temporal. Este enfoque permite descomponer interferogramas complejos, mejorar la resolución de medida y facilitar la identificación precisa de los mecanismos físicos subyacentes. La técnica se valida experimentalmente en la medición de deformación transversal, demostrando su viabilidad para aplicaciones de caracterización multiparamétrica. El tercer bloque introduce una estrategia cuasidistribuida de monitorización mediante reflectometría óptica en el dominio de la frecuencia. A través de una catenaria de reflectores interferométricos y un modelo analítico detallado, se logra la detección simultánea de vibraciones espectralmente complejas y deformaciones longitudinales, con mejoras en resolución y tiempos de respuesta frente a otras tipologías de esquemas distribuidos basados en retrodispersión Rayleigh. Esta arquitectura se plantea como una solución escalable para aplicaciones de diagnóstico estructural de precisión. En conjunto, la tesis proporciona una base técnica y metodológica para el desarrollo de sistemas fotónicos de monitorización física, abordando tanto aspectos estructurales de los dispositivos como estrategias de interrogación y procesamiento de señal. Los resultados permiten identificar nuevas vías de avance en el diseño de láseres y sensores compactos, estables y adaptables a diferentes entornos operativos., This thesis presents the development and analysis of various photonic technologies based on optical fiber for the monitoring of physical parameters, with an emphasis on both point and quasi-distributed configurations. The work is organized into three main sections that progressively address topics ranging from the design of laser sources to advanced interrogation techniques and structural monitoring. The first section focuses on the study of coherent random fiber lasers, fabricated using pseudo-random reflectors inscribed by femtosecond laser. Several configurations are developed with the aim of improving spectral stability, achieving single longitudinal mode operation, and extending emission to the C and L bands. Additionally, their functionality as multiparametric sensors is analyzed, highlighting their ability to simultaneously discriminate between temperature and strain through multi-line sources. The second section examines interferometric optical sensors constructed with hollow-core fibers, proposing an alternative interrogation strategy based on spectral-to-temporal domain transformation. This approach enables the decomposition of complex interferograms, enhances measurement resolution, and facilitates the precise identification of underlying physical mechanisms. The technique is experimentally validated in the measurement of transverse strain, demonstrating its feasibility for multiparametric characterization applications. The third section introduces a quasi-distributed monitoring strategy using frequency-domain optical reflectometry. Through a catenary of interferometric reflectors and a detailed analytical model, simultaneous detection of spectrally complex vibrations and longitudinal strains is enabled, with improved resolution and response times compared to other distributed schemes based on Rayleigh backscattering. This architecture is proposed as a scalable solution for precision structural diagnostics. Overall, the thesis provides a technical and methodological foundation for the development of photonic systems for physical monitoring, addressing both structural aspects of the devices and strategies for interrogation and signal processing. The results make it possible to identify new avenues for advancement in the design of compact, stable, and adaptable lasers and sensors for various operational environments., Financiado por Universidad Pública de Navarra mediante los «Contratos predoctorales UPNA 2020/2021»(Resolución 989/2020), Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI) mediante el proyecto «Dispositivos y Sistemas Fotónicos Sensores para estructuras inteligentes y evaluación no destructiva II»(PID2019-107270RB-C22), Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), Unión Europea NextGenerationEU/PRTR mediante el proyecto «Sistema integrado para la monitorización de tráfico y mantenimiento de carreteras usando sensores de fibra óptica I»(PDC2021-121172-C21) y Fondo Europeo de Desarrollo Regional, Agencia Estatal de Investigación (AEI) mediante el proyecto «Sensores fotónicos para ciudades inteligentes y sostenibles I»(PID2022-137269OB-C21)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa Ofiziala (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Measurement of paracetamol concentration using a fiber laser system

  • Soares, Liliana
  • Pérez Herrera, Rosa Ana
  • Novais, Susana
  • Ferreira, António
  • Frazão, Orlando
  • Silva, Susana
A linear fiber laser system for measurements of paracetamol concentration is experimentally demonstrated. The cavity is based on a fiber loop mirror and an FBG centered at 1567.8 nm. The sensing head corresponds to a refractometric sensor, whose which principle of operation is based on Fresnel reflection in the fiber tip (FBG side). The system works at detected variations of paracetamol concentrations with a sensitivity of [8.74± 0.34)× 10-5] µW/(g/kg) and a resolution of 2.77 g/kg. The results prove that the fiber laser system could be an asset for processing industries, specifically for non-invasive and real-time measurements of concentration., This work was financially supported by the Wellcome Trust, UK, through the Innovator Award “Light-activated cap for catheter sterilization” (WT223940/Z/21/Z); National Funds through FCT/MCTES (PIDDAC), within projects LA/P/0045/2020 (ALiCE), UIDB/00511/2020 and UIDP/00511/2020 (LEPABE); Program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Univesidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021- 130378B-C22 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR. Liliana Soares acknowledges the support of FCT, Portugal, through the Grant 2020.05297.BD.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

One-year analysis of road condition using FBG arrays

  • Corera Orzanco, Íñigo
  • Pradas Martínez, Javier
  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this work, it is presented an analysis of FBG arrays installed in a public road. The arrays were installed in a newly paved urban road and were monitored for more than one year. The study evidences the permanent deformation of the wearing course and the degradation of the reflected spectra of the sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Long-range and high-resolution traffic monitoring based on pulse-compression DAS and advanced vehicle tracking algorithm

  • Corera Orzanco, Íñigo
  • Piñeiro Ben, Enrique
  • Navallas Irujo, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate traffic monitoring over tens of kilometres of road using an enhanced distributed acoustic sensing system based on optical pulse compression and a novel transformed-domain-based processing scheme with enhanced vehicle detection and tracking capabilities., This work was supported in part by European Union “Next generationEU”/PRTR and MCIN/AEI/10.13039/501100011033 under grant PDC2021-121172-C21, in part by FEDER ”A way to make Europe” and MCIN/AEI/10.13039/501100011033 under grant PID2019-107270RB, and in part by Gobierno de Navarra under grant PC210-211 FIBRATRAFIC. The authors would like to thank Gobierno de Navarra and NASERTIC S.A.U for their support by giving access to the dark fiber deployed in this work.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wavelength-switchable L-band fiber laser assisted by random reflectors

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Sánchez González, Arturo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
A wavelength-switchable L-band erbium-doped fiber laser (EDFL) assisted by an artificially controlled backscattering (ACB) fiber reflector is here presented. This random reflector was inscribed by femtosecond (fs) laser direct writing on the axial axis of a multimode fiber with 50 lm core and 125 lm cladding with a length of 17 mm. This microstructure was placed inside a surgical syringe to be positioned in the center of a high-precision rotation mount to accurately control its angle of rotation. Only by rotating this mount, three different output spectra were obtained: a single wavelength lasing centered at 1574.75 nm, a dual wavelength lasing centered at 1574.75 nm and 1575.75 nm, and a single wavelength lasing centered at 1575.5 nm. All of them showed an optical signal-to-noise ratio (OSNR) of around 60 dB when pumped at 300 mW, This work was financed by the program "José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores", funded by the Ministerio de Universidades of Spain (reference CAS21/00351); the Spanish AEI projects PID2019-107270RB, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and projects PDC2021-121172 and TED2021-130378B funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generation EU"/PTR. Finally, the work was also founded by the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Method to use transport microsimulation models to create synthetic distributed acoustic sensing datasets

  • Robles Urquijo, Ignacio
  • Benavente, Juan
  • Blanco García, Javier
  • Diego González, Pelayo
  • Loayssa Lara, Alayn
  • Sagüés García, Mikel
  • Rodríguez Cobo, Luis
  • Cobo, Adolfo
This research introduces a new method for creating synthetic Distributed Acoustic Sensing (DAS) datasets from transport microsimulation models. The process involves modeling detailed vehicle interactions, trajectories, and characteristics from the PTV VISSIM transport microsimulation tool. It then applies the Flamant-Boussinesq approximation to simulate the resulting ground deformation detected by virtual fiber-optic cables. These synthetic DAS signals serve as large-scale, scenario-controlled, labeled datasets on training machine learning models for various transport applications. We demonstrate this by training several U-Net convolutional neural networks to enhance spatial resolution (reducing it to half the original gauge length), filtering traffic signals by vehicle direction, and simulating the effects of alternative cable layouts. The methodology is tested using simulations of real road scenarios, featuring a fiber-optic cable buried along the westbound shoulder with sections deviating from the roadside. The U-Net models, trained solely on synthetic data, showed promising performance (e.g., validation MSE down to 0.0015 for directional filtering) and improved the detectability of faint signals, like bicycles among heavy vehicles, when applied to real DAS measurements from the test site. This framework uniquely integrates detailed traffic modeling with DAS physics, providing a novel tool to develop and evaluate DAS signal processing techniques, optimize cable layout deployments, and advance DAS applications in complex transportation monitoring scenarios. Creating such a procedure offers significant potential for advancing the application of DAS in transportation monitoring and smart city initiatives., This research was funded by the Spanish Goverment 'Subprograma Ayudas Predoctorales 2020 Investigadores' program under Grant PRE2020-096336, assigned to the National Plan project PID2019-107270RB-C21, 'Photonic Devices and Systems Sensors for Intelligent Structures and Non Destructive Evaluation I'; the National 'Knowledge Generation Projects' project 'Photonic Sensors for Smart and Sustainable Cities (Performance)' under grant ID6448137269-137269-4-22; the project 'Integrated System for Traffic and Road Condition Monitoring Using Fiber-Optic Sensors (Ingestion)', under grant PDC2021-121172-C22 funded by MICIU/AEI/10.13039/501100011033 and by the European Union Next GenerationEU/PRTR). This work was supported in part by grant PID2022-137269OB-C21 by MICIU/AEI/10.13039/501100011033 and by ERDF 'A way of making Europe'; and grant PID2022-137269OB-C22 by MICIU/AEI/10.13039/501100011033 and by the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Multicore fiber sensors for strain measurement towards traffic monitoring

  • Sánchez González, Arturo
  • Pradas Martínez, Javier
  • Corera Orzanco, Íñigo
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
In this work, two new interferometric sensors based on multicore optical fibers for the measurement of strain with the ultimate goal of traffic monitoring are presented. The operating principle of each sensor relied on the monitoring of the phase shift difference accumulated between the supermodes of the structure of the multicore segment in a full round trip. The strain characterization for both sensors resulted in a linear response, with sensitivities of -4.073·10-3 rad/με and - 4.389·10-3 rad/με for the aligned and V-shaped cases respectively, and one-hour instabilities below 4.6·10-3 rad with a 95% confidence level. These results suggest its feasibility in applications requiring high sensitivities over very wide strain ranges, such as heavy-vehicle traffic monitoring. To corroborate the hypothesis, both sensors were integrated into the pavement and their response to the traffic was analyzed., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Ring cavity erbium-doped fiber for refractive index measurements

  • Pérez Herrera, Rosa Ana
  • Soares, Liliana
  • Silva, Susana
  • Frazão, Orlando
In this study, an interrogation system based on an erbium-doped fiber ring cavity for refractive index measurements is presented and experimentally demonstrated. This cavity ring includes a 1 × 3 coupler wherein one of the fiber output ports is used to increase the optical power of the system by means of an FBG used as a reflector. The other two output ports are used as a refractive index sensing head and reference port, respectively. An experimental demonstration of this proposed sensor system for the measurement of a distinct refractive index is presented., This work is financed by the program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Universidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021-130378B-C22 funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR; and National Funds through the Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia, within project UIDB/50014/2020. Liliana Soares acknowledges the support of FCT, Portugal through the Grant 2020.05297.BD.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study of in-line capillary fiber sensor for uniaxial transverse deformation

  • Sánchez González, Arturo
  • Leandro González, Daniel
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
This research explores the impact of cyclic uniaxial transverse deformation on an in-line hollow-core fiber etalon. The structure consists of a 6 mm long section of capillary fiber spliced between two standard single-mode fibers. The optical response of the structure is theoretically analyzed in spectral and transformed domains, evidencing Fabry-Perot and antiresonant interferometric mechanisms. A validation of the theoretical behavior is carried out both through simulation and experimentation. The performance of the structure for uniaxial transverse deformation is subsequently evaluated by tracking the phase of the main component in the transformed domain. The relevance of measuring in the time domain is discussed, demonstrating improved accuracy over wavelength shift and inverse spatial domain methods. Several sensors with different internal diameters underwent cycles of transverse deformation, revealing robust linear trends in every case. On average, the structure demonstrated elastic behavior under deformations up to 42 μm, with a mean sensitivity of 0.174 rad/μm, and mechanical breakage taking place at 58 μm. The results confirmed the suitability of the sensor to withstand uniaxial micro-displacements or pressures, with smaller inner diameter capillary fibers showing the best performance., This work was supported in part by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe" under Project PID2019-107270RB-C22 and Project PID2022-137269OB-C21, in part by MCIN/AEI/10.13039/501100011033 and European Union "Next generation EU"/PRTR under Project PDC2021-121172-C21 and Project TED2021- 130378B-C22, and in part by the Public University of Navarre under Project PJUPNA06-2022. Open access funding provided by Public University of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Long-range traffic monitoring based on pulse-compression distributed acoustic sensing and advanced vehicle tracking and classification algorithm

  • Corera Orzanco, Íñigo
  • Piñeiro Ben, Enrique
  • Navallas Irujo, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We introduce a novel long-range traffic monitoring system for vehicle detection, tracking, and classification based on fiber-optic distributed acoustic sensing (DAS). High resolution and long range are provided by the use of an optimized setup incorporating pulse compression, which, to our knowledge, is the first time that is applied to a traffic-monitoring DAS system. The raw data acquired with this sensor feeds an automatic vehicle detection and tracking algorithm based on a novel transformed domain that can be regarded as an evolution of the Hough Transform operating with non-binary valued signals. The detection of vehicles is performed by calculating the local maxima in the transformed domain for a given time-distance processing block of the detected signal. Then, an automatic tracking algorithm, which relies on a moving window paradigm, identifies the trajectory of the vehicle. Hence, the output of the tracking stage is a set of trajectories, each of which can be regarded as a vehicle passing event from which a vehicle signature can be extracted. This signature is unique for each vehicle, allowing us to implement a machine-learning algorithm for vehicle classification purposes. The system has been experimentally tested by performing measurements using dark fiber in a telecommunication fiber cable running in a buried conduit along 40 km of a road open to traffic. Excellent results were obtained, with a general classification rate of 97.7% for detecting vehicle passing events and 99.6% and 85.7% for specific car and truck passing events, respectively., This work was supported in part by European Union “Next generationEU”/PRTR and MCIN/AEI/10.13039/501100011033 under grant PDC2021-121172-C21, in part by FEDER “A way to make Europe” and MCIN/AEI/10.13039/501100011033 under grant PID2019-107270RB, and in part by Gobierno de Navarra under grant PC210-211 FIBRATRAFIC.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High performance fiber laser resonator for dual band (C and L) sensing

  • Sánchez González, Arturo
  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
This work presents an experimental analysis and comparison of the performance of quasi-randomly distributed reflectors inscribed into a single-mode fiber as a sensing mirror both in C- and L-band. Single-wavelength emission has been obtained in either band when using these artificially controlled backscattering fiber reflectors in a ring-cavity fiber laser. Single-longitudinal mode operation with an optical signal to noise ratio (OSNR) of 47 dB and an output power instability as low as 0.04 dB have been measured when employing a C-band optical amplifier. When replaced by an L-band optical amplifier, a single-longitudinal mode behavior has also been obtained, showing an OSNR of 44 dB and an output power instability of 0.09 dB. Regarding their performance as fiber-laser sensing systems, very similar temperature and strain sensitivities have been obtained in both bands, comparable to fiber Bragg grating sensors in the case of temperature and one order of magnitude higher in the case of strain variations., and European Union “Next generationEU”/PTR.This work is part of the project PID2019-107270RB, funded by MCIN/ AEI/10.13039/501100011033 and FEDER “A way to make Europe”, the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and PDC2021-121172, funded by MCIN/ AEI/10.13039/501100011033
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Paracetamol concentration-sensing scheme based on a linear cavity fiber laser configuration

  • Soares, Liliana
  • Pérez Herrera, Rosa Ana
  • Novais, Susana
  • Ferreira, António
  • Frazão, Orlando
  • Silva, Susana
A paracetamol concentration-sensing scheme based on a linear cavity fiber laser configuration is demonstrated experimentally. The laser cavity has a fiber sensor at one end, that allows refractive index measurements. The refractometer consists of a cleaved fiber tip combined with an FBG functioning as a reflecting mirror. The combination of a fiber loop mirror at the other end allows to reflect all the light from the FBG and refractometer, forming a linear cavity. By measuring the intensity variation of the Fresnel reflection at the fiber-to-liquid interface, the measured concentration is linear and have a concentration sensitivity of -8.74±0.34×10-5 µW/(g/kg), over a range of 52.61 to 219.25 g/kg, and with a resolution of 2.77 g/kg. The results obtained present high stability and prove the potential of the fiber laser system to performed real-time measurements of concentration, in a non-invasive way., This research was funded by: National Funds through the Portuguese funding agency, FCT - Fundação para a Ciência e a Tecnologia, within project UIDB/50014/2020; National Funds through FCT/MCTES (PIDDAC), within projects LA/P/0045/2020 (ALiCE), UIDB/00511/2020 and UIDP/00511/2020 (LEPABE); Program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Univesidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021-130378B-C22 funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and European Union “Next generation EU”/PTR. Liliana Soares acknowledges the support of FCT, Portugal, through the Grant 2020.05297.BD.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Time-transformed spectral analysis for multiparametric sensing using a single antiresonant interferometer

  • Jaso Gallego, Isabel
  • Sánchez González, Arturo
  • Bravo Acha, Mikel
  • Pérez Herrera, Rosa Ana
  • Leandro González, Daniel
This work explores the potential of spectral composition analysis in the time-transformed domain for multiparametric sensing using a single in-line hollow-core interferometer. By effectively distinguishing between antiresonance guidance and Fabry Perot-induced contributions, this approach allows simultaneous measurement of two independent parameters. The sensor, featuring polyimide coating, was characterized during humidity cycles at varying temperatures by monitoring phase variations in the transformed domain. The distinct sensitivities of antiresonance and Fabry-Perot components allowed the determination of temperature and relative humidity using a multiparametric linear model, achieving good agreement with experimental results and underscoring its robustness for multiparametric sensing applications., This work was supported in part by projects PID2019-107270RB-C22, PID2022-137269OB-C21 funded by MCIN/AEI/10.13039/501100011033 and FEDER 'A way to make Europe', projects PDC2021-121172-C21, TED2021-130378B-C22 funded by MCIN/AEI/10.13039/501100011033 and European Union 'Next generation EU'/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Stable L-band fiber laser sensor using a backscattering-based multimode fiber reflector

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Sánchez González, Arturo
  • Durán Lázaro, María
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
A new and highly stable L-band fiber laser for sensing is demonstrated. An emission line at 1575.47 nm, was achieved using a special reflector. Good strain sensitivity, optical signal to noise ratio and output power stability were measured., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033, the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and European Union “Next generationEU”/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Development of point optical fiber sensor systems for applications in smart cities, Desarrollo de sistemas de sensores puntuales de fibra óptica para aplicaciones en ciudades inteligentes

  • Rodríguez Rodríguez, Armando
La tecnología de fibra óptica ha avanzado significativamente en las últimas décadas debido a su rendimiento superior en aplicaciones de comunicación. Basándose en estas innovaciones científicas y tecnológicas, los sensores de fibra óptica (FOS) han surgido como soluciones versátiles a muchas limitaciones de las tecnologías de detección tradicionales. Por ejemplo, los sensores de fibra óptica son químicamente inertes y resistentes a la interferencia electromagnética, lo que los hace ideales para su uso en entornos peligrosos. Además de estos beneficios, los sensores de fibra óptica tienen otras características deseables, como bajo ruido de señal, diseño ligero y compacidad. Estas cualidades únicas han hecho posible su implementación en varias aplicaciones, siendo las que han mostrado mayor éxito, las tecnologías basadas en mecanismos interferométricos, de retrodispersión y de redes de difracción de Bragg (FBGs). Las estrategias de detección por fibra óptica utilizan diversos mecanismos de transductores y métodos de multiplexación. Sin embargo, se necesitan mejoras, principalmente debido al alto coste de los sensores de fibra en comparación con las tecnologías establecidas. Por lo tanto, las técnicas de multiplexación son esenciales para reducir los costes por sensor. Elegir un enfoque de multiplexación depende del tipo específico de sensor y de los requisitos de la aplicación. Por ejemplo, las redes de difracción de Bragg funcionan bien con la multiplexación por división de longitud de onda, mientras que los sensores interferométricos requieren métodos más complejos. Aunque el coste es una preocupación principal, el rendimiento y la versatilidad también deben ser considerados para una solución óptima. El progreso de las Ciudades Inteligentes requiere tecnologías de sensores innovadoras que puedan abordar las complejidades de los sistemas urbanos modernos con precisión, eficiencia y escalabilidad. En este sentido, esta tesis pretende contribuir con nuevas soluciones de sensores de fibra óptica puntuales. Incluye la incorporación de redes de difracción de Bragg y fibras ópticas microestructuradas, desplegando métodos de multiplexación híbridos para redes de sensores escalables, e implementando la tecnología Power over Fiber para facilitar el suministro remoto de energía y la interrogación eficiente de redes de sensores heterogéneas. Estas estructuras pueden adaptarse para aplicaciones tales como la medición de parámetros ambientales y el monitoreo de la calidad del agua y la salud estructural. El trabajo desarrollado durante esta tesis ha sido realizado en el grupo de investigación de Comunicaciones Ópticas y Aplicaciones Electrónicas de la Universidad Pública de Navarra (UPNA) bajo el Programa de Doctorado en “Tecnologías de la Comunicación, Bioingeniería y Energías Renovables” para el Grado de Doctor en Ingeniería de Telecomunicación. Además, este trabajo se ha desarrollado en parte durante una estancia de investigación en la Universidade de Aveiro (Portugal) bajo la supervisión del Prof. Dr. Carlos Marques., Fiber optic technology has advanced significantly in recent decades due to its superior performance in communication applications. Building on these scientific and technological innovations, fiber optic sensors (FOS) have emerged as versatile solutions to many limitations of traditional sensing technologies. For instance, fiber optic sensors are chemically inert and resistant to electromagnetic interference, making them ideal for use in hazardous environments. In addition to these benefits, fiber optic sensors have other desirable features, including low signal noise, a lightweight design, and compactness. These unique qualities have enabled their deployment in several applications, with technologies based on interferometric mechanisms, backscattering, and Fiber Bragg Gratings (FBGs) showing the most success. Several fiber optic sensing strategies use various transducer mechanisms and multiplexing methods. However, improvements are needed, primarily due to the high cost of fiber sensors compared to established technologies. Thus, multiplexing techniques are essential for reducing the cost per sensor. Choosing a multiplexing approach depends on the specific sensor type and application requirements. For example, fiber Bragg gratings work well with wavelength division multiplexing, while interferometric sensors require more complex methods. Although cost is a primary concern, performance and versatility must also be considered for an optimal solution. The progress of Smart Cities requires innovative sensing technologies that can address the complexities of modern urban systems with precision, efficiency, and scalability. In this regard, this thesis aims to contribute to the development of new point optical fiber sensing solutions. It includes the incorporation of fiber Bragg gratings and microstructured optical fibers, deploying hybrid multiplexing methods for scalable sensor networks, and implementing Power over Fiber technology to facilitate remote power provision and efficient interrogation of heterogeneous sensor networks. These structures can be adapted for various applications, including measuring environmental parameters and monitoring water quality and structural integrity. The work developed during this thesis was conducted in the Optical Communication and Electronic Applications research group at Universidad Pública de Navarra (UPNA) under the Doctorate Program in “Communications Technologies, Bioengineering, and Renewable Energies” for the degree of Doctor of Philosophy (Ph.D.) in Telecommunication Engineering. Additionally, this work was developed in part during a research stay at the Department of Physics and I3N, Universidade de Aveiro, Aveiro, Portugal, under the supervision of Prof. Dr. Carlos Marques., Financial support received: Universidad Pública de Navarra (UPNA) through the pre-doctoral research grants, mobility grants, and complementary grants for doctoral theses; Research project PID2019-107270RB-C02 funded by the Spanish Government Ministerio de Ciencia e Innovación (MCIN)/Agencia Estatal de Investigación (AEI) and FEDER “A way to make Europe”; Research project PDC2021-121172-C01 funded by the Spanish Government MCIN/AEI and the European Union “Next generation EU” / Plan de Recuperación, Transformación y Resilencia (PRTR); Research project TED2021-130378B-C22 funded by the Spanish Government MCIN/AEI and the European Union “Next Generation EU” / PRTR and Research project PID2022-137269OB funded by the Spanish Government CIN/AEI and FEDER “A way to make Europe”., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa Ofiziala (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Compensation of phase-noise in pulse-compression phase-sensitive OTDR sensors

  • Piñeiro Ben, Enrique
  • Sagüés García, Mikel
  • Eyal, Avishay
  • Loayssa Lara, Alayn
We introduce a technique to compensate the performance impairments due to the laser phase noise in long-range pulse-compression DAS sensors. Experiments demonstrate the use of the longest duration pulse compression waveform to date., This work was supported in part by European Union "Next generationEU"/PRTR and MCIN/AEI/10.13039/501100011033 under grant PDC2021-121172-C21, in part by FEDER "A way to make Europe"and MCIN/AEI/10.13039/501100011033 under grant PID2019-107270RB, in part by Gobierno de Navarra under grant PC210-211 FIBRATRAFIC, and in part by the Israeli Science Foundation (ISF) under grant number 2675/20.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Fiber optic mirror fabrication using general-purpose metallic pigments

  • Jaso Gallego, Isabel
  • Mejia-Olivo, Edison
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, the potential of using general-purpose paints to fabricate highly reflective, low-cost optical mirrors is evaluated. The study shows that high-reflectivity mirrors can be created in standard single-mode fiber in a reliable, simple and economic manner using the appropriate metallic paint. Preliminary results confirm that the grain size of the metallic particles is a crucial factor in the reflective behavior, together with the substrate in which the particles are suspended. Moreover, interferometric patterns have been observed in some cases, which could lead to the creation of simple and economic fiber optic sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, TED2021-130378B-C22, funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Measurement of paracetamol concentration using an erbium-doped fiber ring cavity

  • Soares, Liliana
  • Pérez Herrera, Rosa Ana
  • Novais, Susana
  • Ferreira, António
  • Silva, Susana
  • Frazão, Orlando
Process Analytical Technology (PAT) has been increasingly used in the pharmaceutical industry to monitor essential parameters in real-time during pharmaceutical processes. The concentration of Active Pharmaceutical Ingredients (APIs), such as paracetamol, is one of these parameters, and controlling its variations allows for optimization of the production process. In this study, a refractometric sensor, implemented by an interrogation system based on an Erbium-Doped Fiber Ring Cavity (EDFRC), was presented and experimentally demonstrated. The Cavity Ring proposed included a 1 × 3 coupler. One port of the coupler was used to increase the optical power of the system through a Fiber Bragg Grating (FBG), and the other two ports were used as sensing head and reference. The sensor detected variations of paracetamol concentration with a sensitivity of [(−1.00 ± 0.05) × 10−3] nW/(g/kg) and a resolution of 5.53 g/kg. The results demonstrate the potential of this technology as a possible non-invasive PAT tool., and European Union “Next generation EU”/PTR. Liliana Soares acknowledges the support of FCT, Portugal, through the Grant 2020.05297.BD.This research was funded by: National Funds through the Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia, within project UIDB/50014/2020; National Funds through FCT/MCTES (PIDDAC), within projects LA/P/0045/2020 (ALiCE), UIDB/00511/2020, and UIDP/00511/2020 (LEPABE); Program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Univesidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021-130378B-C22, funded by MCIN/AEI/10.13039/501100011033