Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Identification of six cardiovascular risk biomarkers in the young population: A promising tool for early prevention

  • Martínez Santos, Paula
  • Baldán Martín, Montserrat
  • López, Juan A.
  • Martín Lorenzo, Marta
  • Santiago Hernández, Aránzazu
  • Agudiez, Marta
  • Cabrera Sierra, Martha
  • Calvo, Eva
  • Vázquez, Jesús
  • Ruiz Hurtado, Gema
  • Vivanco, Fernando
  • Ruilope Urioste, Luis Miguel
  • Barderas, María G.
  • Álvarez Llamas, Gloria
Background and aims The predictive value of traditional CV risk calculators is limited. Novel indicators of CVD progression are needed particularly in the young population. The main aim of this study was the identification of a molecular profile with added value to classical CV risk estimation. Methods: Eighty-one subjects (30–50 years) were classified in 3 groups according to their CV risk: healthy subjects; individuals with CV risk factors; and those who had suffered a previous CV event. The urine proteome was quantitatively analyzed and significantly altered proteins were identified between patients' groups, either related to CV risk or established organ damage. Target-MS and ELISA were used for confirmation in independent patients’ cohorts. Systems Biology Analysis (SBA) was carried out to identify functional categories behind CVD. Results: 4309 proteins were identified, 75 of them differentially expressed. ADX, ECP, FETUB, GDF15, GUAD and NOTCH1 compose a fingerprint positively correlating with lifetime risk estimate (LTR QRISK). Best performance ROC curve was obtained when ECP, GDF15 and GUAD were combined (AUC = 0.96). SBA revealed oxidative stress response, dilated cardiomyopathy, signaling by Wnt and proteasome, as main functional processes related to CV risk. Conclusions: A novel urinary protein signature is shown, which correlates with CV risk estimation in young individuals. Pending further confirmation, this six-protein-panel could help in CV risk assessment.
Repisalud
Publication Artículo científico (JournalArticle)

ANKK1 Is a Wnt/PCP Scaffold Protein for Neural F-ACTIN Assembly.

  • Domínguez-Berzosa, Laura
  • Cantarero, Lara
  • Rodríguez-Sanz, María
  • Tort, Gemma
  • Garrido, Elena
  • Troya-Balseca, Johanna
  • Sáez, María
  • Castro-Martínez, Xóchitl Helga
  • Fernandez-Lizarbe, Sara
  • Urquizu, Edurne
  • Calvo, Enrique
  • López, Juan Antonio
  • Palomo, Tomás
  • Palau, Francesc
  • Hoenicka, Janet
The IA polymorphism is a marker of both the Ankyrin Repeat and Kinase Domain containing I gene () encoding a RIP-kinase, and the gene for the dopamine receptor D2. Despite a large number of studies of IA in addictions and other psychiatric disorders, there is difficulty in interpreting this genetic phenomenon due to the lack of knowledge about ANKK1 function. In SH-SY5Y neuroblastoma models, we show that ANKK1 interacts with the synapse protein FERM ARH/RhoGEF and Pleckstrin Domain 1 (FARP1), which is a guanine nucleotide exchange factor (GEF) of the RhoGTPases RAC1 and RhoA. ANKK1-FARP1 colocalized in F-ACTIN-rich structures for neuronal maturation and migration, and both proteins activate the Wnt/PCP pathway. ANKK1, but not FARP1, promotes neuritogenesis, and both proteins are involved in neuritic spine outgrowth. Notably, the knockdown of or affects RhoGTPases expression and neural differentiation. Additionally, ANKK1 binds WGEF, another GEF of Wnt/PCP, regulating its interaction with RhoA. During neuronal differentiation, ANKK1-WGEF interaction is downregulated, while ANKK1-FARP1 interaction is increased, suggesting that ANKK1 recruits Wnt/PCP components for bidirectional control of F-ACTIN assembly. Our results suggest a brain structural basis in IA-associated phenotypes.
Repisalud
Publication Artículo científico (JournalArticle)

Urine Haptoglobin and Haptoglobin-Related Protein Predict Response to Spironolactone in Patients With Resistant Hypertension

  • Martin-Lorenzo, Marta
  • Martinez, Paula J
  • Baldan-Martin, Montserrat
  • Lopez, Juan Antonio
  • Minguez, Pablo
  • Santiago-Hernandez, Aranzazu
  • Vazquez, Jesus
  • Segura, Julian
  • Ruiz-Hurtado, Gema
  • Vivanco, Fernando
  • Barderas, Maria G
  • Ruilope, Luis M
  • Alvarez-Llamas, Gloria
Resistant hypertension prevalence is progressively increasing, and prolonged exposure to suboptimal blood pressure control results in higher cardiovascular risk and end-organ damage. Among various antihypertensive agents, spironolactone seems the most effective choice to treat resistant hypertension once triple therapy including a diuretic fails. However success in blood pressure control is not guaranteed, adverse effects are not negligible, and no clinical tools are available to predict patient's response. Complementary to our previous study of resistant hypertension metabolism, here we investigated urinary proteome changes with potential capacity to predict response to spironolactone. Twenty-nine resistant hypertensives were included. A prospective study was conducted and basal urine was collected before spironolactone administration. Patients were classified in responders or nonresponders in terms of blood pressure control. Protein quantitation was performed by liquid chromatography-mass spectrometry; ELISA and target mass spectrometry analysis were performed for confirmation. Among 3310 identified proteins, HP (haptoglobin) and HPR (haptoglobin-related protein) showed the most significant variations, with increased levels in nonresponders compared with responders before drug administration (variation rate, 5.98 and 7.83, respectively). Protein-coordinated responses were also evaluated by functional enrichment analysis, finding oxidative stress, chronic inflammatory response, blood coagulation, complement activation, and regulation of focal adhesions as physiopathological mechanisms in resistant hypertension. In conclusion, protein changes able to predict patients' response to spironolactone in basal urine were here identified for the first time. These data, once further confirmed, will support clinical decisions on patients' management while contributing to optimize the rate of control of resistant hypertensives with spironolactone.
Repisalud
Publication Artículo científico (JournalArticle)

Identification of six cardiovascular risk biomarkers in the young population: A promising tool for early prevention

  • Martínez, Paula J
  • Baldan-Martin, Montserrat
  • Lopez, Juan Antonio
  • Martín-Lorenzo, Marta
  • Santiago-Hernández, Aránzazu
  • Agudiez, Marta
  • Cabrera, Martha
  • Calvo, Eva
  • Vazquez, Jesus
  • Ruiz-Hurtado, Gema
  • Vivanco, Fernando
  • Ruilope, Luis M
  • Barderas, Maria G
  • Alvarez-Llamas, Gloria
BACKGROUND AND AIMS: The predictive value of traditional CV risk calculators is limited. Novel indicators of CVD progression are needed particularly in the young population. The main aim of this study was the identification of a molecular profile with added value to classical CV risk estimation. METHODS: Eighty-one subjects (30-50 years) were classified in 3 groups according to their CV risk: healthy subjects; individuals with CV risk factors; and those who had suffered a previous CV event. The urine proteome was quantitatively analyzed and significantly altered proteins were identified between patients' groups, either related to CV risk or established organ damage. Target-MS and ELISA were used for confirmation in independent patients' cohorts. Systems Biology Analysis (SBA) was carried out to identify functional categories behind CVD. RESULTS: 4309 proteins were identified, 75 of them differentially expressed. ADX, ECP, FETUB, GDF15, GUAD and NOTCH1 compose a fingerprint positively correlating with lifetime risk estimate (LTR QRISK). Best performance ROC curve was obtained when ECP, GDF15 and GUAD were combined (AUC = 0.96). SBA revealed oxidative stress response, dilated cardiomyopathy, signaling by Wnt and proteasome, as main functional processes related to CV risk. CONCLUSIONS: A novel urinary protein signature is shown, which correlates with CV risk estimation in young individuals. Pending further confirmation, this six-protein-panel could help in CV risk assessment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave oscillator and frequency comb in a silicon optomechanical cavity with a full phononic bandgap

  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Martín, Leopoldo L.
  • Navarro-Urrios, Daniel
[EN] Cavity optomechanics has recently emerged as a new paradigm enabling the manipulation of mechanical motion via optical fields tightly confined in deformable cavities. When driving an optomechanical (OM) crystal cavity with a laser blue-detuned with respect to the optical resonance, the mechanical motion is amplified, ultimately resulting in phonon lasing at MHz and even GHz frequencies. In this work, we show that a silicon OM crystal cavity performs as an OM microwave oscillator when pumped above the threshold for self-sustained OM oscillations. To this end, we use an OM cavity designed to have a breathing-like mechanical mode at 3.897 GHz in a full phononic bandgap. Our measurements show that the first harmonic of the detected signal displays a phase noise of ¿¿100 dBc/Hz at 100 kHz. Stronger blue-detuned driving leads eventually to the formation of an OM frequency comb, whose lines are spaced by the mechanical frequency. We also measure the phase noise for higher-order harmonics and show that, unlike in Brillouin oscillators, the noise is increased as corresponding to classical harmonic mixing. Finally, we present real-time measurements of the comb waveform and show that it can be fitted to a theoretical model recently presented. Our results suggest that silicon OM cavities could be relevant processing elements in microwave photonics and optical RF processing, in particular in disciplines requiring low weight, compactness and fiber interconnection., This work was supported by the European Commission (PHENOMEN H2020-EU-713450); Programa de Ayudas de Investigacion y Desarrolo (PAID-01-16) de la Universitat Politecnica de Valencia; Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (PROMETEO/2019/123, PPC/2018/002, IDIFEDER/2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanical microwave oscillators

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical interaction in optical dielectric cavities can be used to generate high-purity microwave tones, giving rise to optomechanical microwave oscillators. Here, we introduce the main properties of these devices, which can be implemented in photonic integrated chips, and envisage its deployment in the mid-term in microwave photonics applications., This work was supported by the European Commission (PHENOMEN H2020-EU-713450; SIOMO H2020-EU-945915); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (BEST/ 2020/178, PROMETEO/2019/123, PPC/2018/002, IDIFEDER/ 2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of ferrite nanoparticle type and content on the crystallization kinetics and electroactive phase nucleation of poly(vinilidene fluoride)

  • Sencadas, Vitor Joao Gomes Da Silva
  • Pitaes, Alexandre
  • Benelmekki, Maria
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This work reports on the nucleation of the beta-phase of poly(vinylidene fluoride) (PVDF) by incorporating CoFe2O4 and NiFe2O4 nanoparticles, leading in this way to the preparation of magnetoelectric composites. The fraction of filler nanoparticles needed to produce the same beta- to alpha-phase ratio in crystallized PVDF is 1 order of magnitude lower in the cobalt ferrite nanoparticles. The interaction between nanoparticles and PVDF chains induce the all-trans conformation in PVDF segments, and this structure then propagates in crystal growth. The nucleation kinetics is enhanced by the presence of nanoparticles, as corroborated by the increasing number of spherulites with increasing nanoparticle content and by the variations of the Avrami's exponent. Further, the decrease of the crystalline fraction of PVDF with increasing nanoparticle content indicates that an important fraction of polymer chains are confined in interphases with the filler particle., This work is funded by FEDER funds through the “Programa Operacional Factores de Competitividade COMPETE” and by national funds by FCT- Fundac-~ao para a Ci^encia e a Tecnologia, project references NANO/NMed-SD/0156/2007 and PTDC/CTM/69316/2006. V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. P.M. thanks the FCT for the SFRH/BD/45265/2008 grant. J.L.G.-R. acknowledges the support of the Spanish Ministry of Education through Project No. MAT2010-21611-C03-01 (including the FEDER financial support), Project EUI2008-00126, and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Determination of the parameters affecting electrospun chitosan fiber size distribution and morphology

  • Sencadas, Vitor Joao Gomes Da Silva
  • Correia, Daniela Maria
  • Areias Cepa, Anabela
  • Botelho, G.
  • Fonseca, A.M.
  • Neves, I.C.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros Mendez, Senen
The production of chitosan nanofiber mats by electrospinning presents serious difficulties due to the lack of suitable solvents and the strong influence of processing parameters on the fiber properties. Two are the main problems to be solved: to control the properties of the solution in order to obtain large area uniform fiber mats by having a stable flow rate and to avoid sparks during the process, damaging the fiber mats. In this work chitosan electrospun mats have been prepared form solutions of trifluoroacetic acid/dichloromethanemixtures, allowing solving the aforementionedproblems.Mats withuniformfibers of submicron diameters without beads were obtained. Further, the influence of the different solution and process parameters on the mean fiber diameter and on the width of the distribution of the fiber sizes has been assessed. Solvent composition, needle diameter, applied voltage and traveling distance were the parameters considered in this study., This work is funded by FEDER funds through the “Programa Operacional Factores de Competitividade – COMPETE” and by national funds by FCT – Fundac ̧ ão para a Ciência e a Tecnologia, project references NANO/NMed-SD/0156/2007. VS thanks the FCT for the SFRH/BPD/63148/2009 grants. JLGR acknowledge the sup- port of the Spanish Ministry of Science and Innovation through project No. MAT2010-21611-C03-01 (including the FEDER finan- cial support) and Programa Nacional de Internacionalización de la I+D project EUI2008-00126. Funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Insti- tuto de Salud Carlos III (Ministry of Science and Innovation) is also acknowledged. Thanks are due to the National NMR Network that was purchased within the framework of the National Program for Scientific Re-equipment, contract REDE/1517/RMN/2005 with funds from POCI 2010 (FEDER) and FCT. Also thank to the UPV Microscopy Service for the use of their lab.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Radiationless anapole states in on-chip photonics

  • Díaz-Escobar, Evelyn
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Bauer, Thomas
  • Barreda, Ángela I.
  • Kuipers, K.
[EN] High-index nanoparticles are known to support radiationless states called anapoles, where dipolar and toroidal moments interfere to inhibit scattering to the far field. In order to exploit the striking properties arising from these interference conditions in photonic integrated circuits, the particles must be driven in-plane via integrated waveguides. Here, we address the excitation of electric anapole states in silicon disks when excited on-chip at telecom wavelengths. In contrast to normal illumination, we find that the anapole condition¿identified by a strong reduction of the scattering¿does not overlap with the near-field energy maximum, an observation attributed to retardation effects. We experimentally verify the two distinct spectral regions in individual disks illuminated in-plane from closely placed waveguide terminations via far-field and near-field measurements. Our finding has important consequences concerning the use of anapole states and interference effects of other Mie-type resonances in high-index nanoparticles for building complex photonic integrated circuitry., E.D.E. acknowledges funding from Generalitat Valenciana under grant GRISOLIAP/2018/164. A.I.B. acknowledges financial support by the Alexander von Humboldt Foundation. T.B. and L.K. acknowledge support from the European Research Council (ERC) Advanced Investigator Grant no. 340438-CONSTANS. E.P.-C. gratefully acknowledges support from the Spanish Ministry of Science and Innovation under grant FJCI-2015-27228 and postdoctoral research stay grant CAS19/00349. A.M. thanks funding from Generalitat Valenciana (Grants No. PROMETEO/2019/123, BEST/2020/178 and IDIFEDER/2018/033) and Spanish Ministry of Science, Innovation and Universities (Grants No. PRX18/00126 and PGC2018-094490-BC22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanical Modulation Spectroscopy of Bound States in the Continuum in a Dielectric Metasurface

  • Zanotto, S.
  • Conte, G.
  • Navarro-Urrios, Daniel
  • Tredicucci, A.
  • Pitanti, A.
  • Bellieres, Laurent Christophe
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Elusive features in photonic and electronic devices can be detected by means of advanced, time-domain spectroscopic techniques. In this paper we introduce a modulation spectroscopy based on the optomechanical interaction of photonic and mechanical modes. Applying the technique to a Si metasurface and its drumlike mechanical modes, we detect narrow-band quasi-bound-state-in-the-continuum (quasi-BIC) modes close to normal incidence, where their measurement can be hindered by a high-symmetry protection and undesired background modes. Showing a visibility enhancement of more than one order of magnitude, the optomechanical modulation spectroscopy can be an innovative tool for precise spectroscopy of a wide set of photonic devices, including the goal of measuring purely symmetry protected BIC resonances., A.M. acknowledges funding from Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B-C21, PRX18/00126) and Generalitat Valenciana (PROMETEO/2019/123, IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vertical Engineering for Large Brillouin Gain in Unreleased Silicon-Based Waveguides

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Korovin, Alexander V.
  • Pennec, Yan
  • Ahopelto, Jouni
  • Djafari-Rouhani, Bahram
[EN] Strong acousto-optic interaction in high-index waveguides and cavities generally requires the releasing of the high-index core to avoid mechanical leakage into the underlying low-index substrate. This complicates fabrication, limits thermalization, reduces the mechanical robustness, and hinders large-area optomechanical devices on a single chip. Here, we overcome this limitation by employing vertical photonic-phononic engineering to drastically reduce mechanical leakage into the cladding by adding a pedestal with specific properties between the core and the cladding. We apply this concept to a silicon-based platform, due to the remarkable properties of silicon to enhance optomechanical interactions and the technological relevance of silicon devices in multiple applications. Specifically, the insertion of a thick silicon nitride layer between the silicon guiding core and the silica substrate contributes to reducing gigahertz-frequency phonon leakage while enabling large values of the Brillouin gain in an unreleased platform. We numerically obtain values of the Brillouin gain around 300 ( W m ) ¿ 1 for different configurations, which could be further increased by operation at cryogenic temperatures. These values should enable Brillouin-related phenomena in centimeter-scale waveguides or in more compact ring resonators. Our findings could pave the way toward large-area unreleased-cavity and waveguide optomechanics on silicon and other high-index photonic technologies., This work was supported by the European Commission (PHENOMEN Grant No. H2020-EU-713450), the Universitat Politecnica de Valencia (Grant No. PAID-01-169), the Ministerio de Ciencia, Innovacion y Universidades (Grants No. PGC2018-094490-B and No. PRX18/00126), and the Generalitat Valenciana (Grant No. PROMETEO/2019/123)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Traditional Sweet Peppers as Resources for Internal Fruit Quality: Evidence from Experimental F1 Hybrids Across Two Organic Growing Environments

  • Jiménez-Perez, Marisa|||0000-0001-8427-4700
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
[EN] Traditional sweet pepper germplasm represents a valuable source of variation in fruit quality traits for hybrid breeding and sustainable production. Although hybridization has mainly exploited heterosis for yield and related traits, its effect on fruit quality remains underexplored. In this single-year study, traditional Spanish genotypes and their hybrids, derived from crosses with modern virus-resistance donor lines, were evaluated in two organic environments in southeastern Spain: open-field conditions in Valencia and greenhouse conditions in Murcia. Sugars, vitamin C and flavonoids were determined by HPLC, while red and yellow-orange carotenoids were assessed spectrophotometrically. Genotype × environment responses, heterosis, principal component analysis and trait correlations were also evaluated. Genotype explained substantial variation in sugars, vitamin C and carotenoids, whereas environment was the main factor for flavonoids. Significant G × E interactions were detected for all traits. Sugars and vitamin C differed less between the two environments, while flavonoids and carotenoids tended to reach higher levels in the open-field trial. Positive mid-parent heterosis was more frequent than best-parent heterosis, highlighting P10 × P5 in sugars (26%, open-field), P6 × P10 in vitamin C (33%, greenhouse), P9 × P10 in flavonoids (82%, open-field) and P10 × P2 in carotenoids (87%, open-field). These results identified promising traditional genotypes and hybrids with high internal fruit quality under the tested conditions, although multi-year confirmation is needed., This research was partially funded by projects PID2019-110221RR-C32 and PID2022-137735OR-C33, financed by MCIN/AEI/10.13039/501100011033/FEDER, UE. This study also received funding from the European Union s Horizon 2020 research and innovation program under grant agreement No. 101059872-LIVESEEDING. Marisa Jiménez Pérez acknowledges her PhD grant FPU20/03486, funded by the Ministerio de Universidades and the short-stay mobility grant EST24/00126, funded by the Ministerio de Ciencia, Innovación y Universidades.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fibronectin adsorption and cell response on electroactive poly (vinylidene fluoride) films

  • Ribeiro, Clarisse
  • Panadero Pérez, Juan Alberto
  • Sencadas, Vitor Joao Gomes Da Silva
  • Lanceros Mendez, Senen
  • Tamaño Machiavello, María Noel
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Due to the large potential of electroactive materials in novel tissue engineering strategies, the aim of this work is to determine if the crystalline phase and/or the surface electrical charge of electroactive poly(vinylidene fluoride), PVDF, have influence on the biological response in monolayer cell culture. Non-polar α-PVDF and electroactive β-PVDF were prepared. The β-PVDF films were poled by corona discharge to show negative or positive electrical surface charge density. It has been concluded that hydrophilicity of the PVDF substrates depends significantly on crystalline phase and polarity. Furthermore, by means of atomic force microscopy and an enzyme-linked immunosorbent assay test, it has been shown that positive or negative poling strongly influences the behavior of β-PVDF supports with respect to fibronectin (FN) adsorption, varying the exhibition of adhesion ligands of adsorbed FN. Culture of MC3T3-E1 pre-osteoeblasts proved that cell proliferation depends on surface polarity as well. These results open the viability of cell culture stimulation by mechanical deformation of a piezoelectric substrate that results in varying electrical charge densities on the substrate surface., This work is funded by FEDER funds through the 'Programa Operacional Factores de Competitividade-COMPETE' and by national funds by FCT-Fundacao para a Ciencia e a Tecnologia, project reference NANO/NMed-SD/0156/2007. CR thanks the INL for a PhD grant. VS and JAP thank the FCT for the SFRH/BPD/63148/2009 and SFRH/BD/64586/2009/grants, respectively. JLGR acknowledges the support of the Spanish Ministry of Education through project no MAT2010-21611-C03-01 (including the FEDER financial support), project EUI2008-00126 and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana) and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors thank Armando Ferreira for the help with the contact angle measurements and CENTI, Portugal, for allowing the use of the set-up.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toward Chiral Sensing and Spectroscopy Enabled by All-Dielectric Integrated Photonic Waveguides

  • Vázquez-Lozano, J. Enrique
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Chiral spectroscopy is a powerful technique enabling to identify optically the chirality of matter. So far, most experiments to check the chirality of matter or nanostructures have been performed through arrangements wherein both the optical excitation and detection are realized via circularly polarized light propagating in free space. However, for the sake of miniaturization, it would be desirable to perform chiral spectroscopy in photonic integrated platforms, with the additional benefit of massive parallel detection, low¿cost production, repeatability, and portability. Here it is shown that all¿dielectric photonic waveguides can support chiral modes under proper combination of fundamental eigenmodes. Two mainstream configurations are investigated: a dielectric wire with square cross section and a slotted waveguide. Three different scenarios in which such waveguides could be used for chiral detection are numerically analyzed: waveguides as near¿field probes, evanescent¿induced chiral fields, and chiroptical interaction in void slots. In all the cases, a metallic nanohelix is considered as a chiral probe, though all the approaches can be extended to other kinds of chiral nanostructures as well as matter. These results establish that chiral applications such as sensing and spectroscopy could be realized in standard integrated optics, in particular, with silicon-based technology., The authors thank S. Lechago for valuable comments and technical support with the numerical simulations. This work was partially supported by funding from the European Commission Project THOR H2020-EU-829067. A.M. also acknowledges funding from Generalitat Valenciana (Grant No. PROMETEO/2019/123) and Spanish Ministry of Science, Innovation and Universities (Grant No. PRX18/00126).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical-chemical properties of cross-linked chitosan electrospun fiber mats

  • Sencadas, Vitor Joao Gomes Da Silva
  • Correia, Daniela
  • Ribeiro, Clarisse
  • Moreira, S.
  • Botelho, G.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Chitosan fiber mats were successfully processed by electrospinning. The as-spun fiber mats were neutralized with ethanol and cross-linked with glutaraldehyde. A decrease of the fiber average diameter from 243 +/- 43 nm down to 215.53 nm was observed for the neutralized and cross-linking chitosan membrane. It was found that the processing conditions do not alter the initial deacetylation degree of the polymer. Polymer crystallinity index showed a decrease from 61% for the Protasan material down to 17% for the cross-linking fiber mats. A swelling index up to 1000% was observed for the cross-linked samples. Preliminary MC-3T3-E1 cell culture results showed good cell adhesion and proliferation in the cross-linked chitosan fiber mats., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds by FCT - Fundacao para a Ciencia e a Tecnologia, project references NANO/NMed-SD/0156/2007. V.S. and SM thanks the FCT grants SFRH/BPD/63148/2009 and SFRH/BPD/64726/2009, respectively. The authors also thank the support of the COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles' (ESNAM). JLGR acknowledge the support of the Spanish Ministry of Science and Innovation through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and Programa Nacional de Internacionalizacion de la I+D project EUI2008-00126. The authors also thank the National NMR Network (National Program for Scientific Re-equipment, REDE/1517/RMN/2005, funds from POCI 2010 (FEDER) and FCT) and Microscopy Service of the UPV for the use of their lab.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of Parameters Influencing fiber characteristics of chitosan nanofiber membrane to optimize fiber mat productioi

  • Areias, A.C.
  • Gómez-Tejedor, José Antonio
  • Sencadas, V.
  • Alio, J.
  • Lanceros-Mendez, S.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Electrospun chitosan nanofiber mats have been obtained using chitosan solutions in a mixture of trifluoroacetic acid and dichloromethane. The relationship between processing parameters (solvent composition, polymer concentration in the solution, feeding rate, applied voltage, traveling distance between the needle, and the collector) and fiber morphology was studied. Taguchi's methodology was followed to determine which parameters have the strongest influence on mean fiber diameter and fiber homogeneity. Chitosan nanofibers obtained with this procedure were water soluble due to the protonation of amine side groups but were successfully neutralized by immersion in calcium carbonate solutions. It was established that fiber diameter is mainly determined by the solution concentration and the distance from the needle to the collector while other parameters have less influence. The set of parameters that produce the thinnest fibers were a concentration of 8 wt%, a TFA/DCM ratio of 80:20 (v/v%), a voltage of 30 kV, a flow rate of 6.0 mL/h, a gap distance of 10 cm, using a needle diameter of 0.5, allowing to produce randomly oriented mats with a mean fiber thickness of 66 nm. © 2012 Society of Plastics Engineers., Contract grant sponsor: Portuguese Foundation for Science and Technology (FCT); contract grant number: NANO/NMed-SD/0156/2007; Contract grant sponsor: FCT; contract grant number: SFRH/BPD/63148/2009; Contract grant sponsor: Spanish Ministry of Science and Innovation; contract grant number: MAT2010-21611-C03-01; Contract grant sponsor: Programa Nacional de Internacionalizacion de la I+D; contract grant number: EUI2008-00126; Contract grant sponsors: Regenerative Medicine collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation); Contract grant sponsors: Spanish Ministry of Science and Innovation, Centro para el Desarrollo Tecnologico Industrial (CDTI), CENIT: "Customized Eye Care'' and CeyeC; contract grant number: CEN-20091021; Contract grant sponsor: The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid photonic-plasmonic cavities based on the nanoparticle-on-a-mirror configuration

  • Barreda, Ángela I.
  • Zapata-Herrera, Mario
  • Palstra, Isabelle M.
  • Aizpurua, Javier
  • Koenderink, A. Femius
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, the plasmonic element is usually a metallic bow-tie antenna, so the plasmonic gap-defined by lithography-is limited to minimum values of several nanometers. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as plasmonic gaps smaller than 1 nm can be created. Here, we design a hybrid cavity that combines an NPoM plasmonic cavity and a dielectric-nanobeam photonic crystal cavity operating at transverse-magnetic polarization. The metallic nanoparticle can be placed very close (<1 nm) to the upper surface of the dielectric cavity, which acts as a low-reflectivity mirror. We demonstrate through numerical calculations of the local density of states that this hybrid plasmonic-photonic cavity exhibits quality factors Q above 10(3) and normalized mode volumes V down to 10(-3), thus resulting in high Purcell factors (F-P approximate to 10(5)), while being experimentally feasible with current technology. Our results suggest that hybrid cavities with sub-nanometer gaps should open new avenues for boosting light -matter interaction in nanophotonic systems., Horizon 2020 Framework Programme (829067 THOR); Generalitat Valenciana (PPC/2018/002, PROMETEO/2019/123); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126); Alexander von Humboldt-Stiftung.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relaxation dynamics of poly(vinylidene fluoride) studied by dynamical mechanical measurements and dielectric spectroscopy

  • Sencadas, V.
  • Lanceros-Mendez, S.
  • Andrio Balado, A.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this study is to analyze the mobility of polymer chains in semicrystalline poly(vinylidene fluoride) (PVDF). PVDF crystallizes from the melt in the crystalline phase. The transformation from the phase to the electroactive phase can be induced by stretching at temperatures in the range between 80 and 140 &#9702;C. The spherulitic structure of the crystalline phase is deformed during stretching to form fibrils oriented in the direction of the strain. The amorphous phase confined among the crystalline lamellae is distorted as well and some degree of orientation of the polymer chains is expected. Dynamicmechanical and dielectric spectroscopy measurements were performed in PVDF films stretched to strain ratios up to 5 at temperatures between 80 and 140 &#9702;C. Dynamic-mechanical measurements were conducted between &#8722;60 &#9702;C and melting and in this temperature range the relaxation spectra show the main relaxation of the amorphous phase (called -relaxation) and at higher temperatures a relaxation related to crystallites motions (c-relaxation). Although the mean relaxation times of the -relaxation are nearly equal in PVDF before and after crystal phase transformation, a significant change of shape of the relaxation spectrum proves the effect of chain distortion due to crystal reorganization. In stretched PVDF the elastic modulus of the polymer in the direction of deformation is significantly higher than in the transversal one, as expected by chain and crystals fibril orientation. The recovery of the deformation when the sample is heated is related with the appearance of the c-relaxation. Dielectric spectroscopy spectrum shows the main relaxation of the amorphous phase and a secondary process (-relaxation) at lower temperatures. Stretching produces significant changes in the relaxation processes, mainly in the strength and shape of the main relaxation. The Havriliak-Negami function has been applied to analyze the dielectric response., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade-COMPETE" and by national funds by FCT-Fundacao para a Ciencia e Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM/69316/2006 and PTDC/CTM-NAN/112574/2009. V. S. thanks the FCT for the SFRH/BPD/63148/2009 grant. JLGR acknowledges the support of the Spanish Ministry of Science and Innovation through MAT2010-21611-C03-01 (including the FEDER financial support), and EUI2008-00126 projects and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors also acknowledge support from the COST Action MP1003, 2010 "European Scientific Network for Artificial Muscles".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Glass transition and polymer dynamics in silver/poly(methyl methacrylate) nanocomposites

  • Pandis, C.
  • Logakis, E.
  • Kyritsis, A.
  • Pissis, P.
  • Vodnik, V. V.
  • Dzunuzovic, E.
  • Nedeljkovic, J. M.
  • Djokovic, V.
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Dynamic mechanical-thermal analysis (DMTA), differential scanning calorimetry (DSC), thermally stimulated depolarization currents (TSDC) and, mainly, broadband dielectric relaxation spectroscopy (DRS) were employed to investigate in detail glass transition and polymer dynamics in silver/poly(methyl methacrylate) (Ag/PMMA) nanocomposites. The nanocomposites were prepared by radical polymerization of MMA in the presence of surface modified Ag nanoparticles with a mean diameter of 5.6 nm dispersed in chloroform. The fraction of Ag nanoparticles in the final materials was varied between 0 and 0.5 wt%, the latter corresponding to 0.055 vol%. The results show that the nanoparticles have practically no effect on the time scale of the secondary ß and ¿ relaxations, whereas the magnitude of both increases slightly but systematically with increasing filler content. The segmental ¿ relaxation, associated with the glass transition, becomes systematically faster and stronger in the nanocomposites. The glass transition temperature T g decreases with increasing filler content of the nanocomposites up to about 10 °C, in good correlation by the four techniques employed. Finally, the elastic modulus decreases slightly but systematically in the nanocomposites, both in the glassy and in the rubbery state. The results are explained in terms of plasticization of the PMMA matrix, due to constraints imposed to packing of the chains by the Ag nanoparticles, and at the same time, of the absence of strong polymer-filler interactions, due to the surface modification of the Ag nanoparticles by oleylamine at the stage of preparation. © 2011 Elsevier Ltd. All rights reserved., JLGR acknowledges the support of the Spanish Ministry of Science and Innovation through project No. EUI2008-00126 and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Automated calibration of FEM models using LiDAR point clouds

  • Riveiro Rodríguez, Belén
  • Cubreiro, G.
  • Conde Carnero, Borja
  • Cabaleiro Alfaya, María
  • Lindenbergh, R.
  • Soilán Rodríguez, Mario
  • Caamaño Martinez, Jose Carlos
In present work it is pretended to estimate elastic parameters of beams through the combined use of precision geomatic techniques (laser scanning) and structural behaviour simulation tools. The study has two aims, on the one hand, to develop an algorithm able to interpret automatically point clouds acquired by laser scanning systems of beams subjected to different load situations on experimental tests; and on the other hand, to minimize differences between deformation values given by simulation tools and those measured by laser scanning. In this way we will proceed to identify elastic parameters and boundary conditions of structural element so that surface stresses can be estimated more easily., Ministerio de Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017- 87598, Ministerio de Educación, Cultura y Deporte | Ref. CAS15/00126, Xunta de Galicia | Ref. ED431C2016‐038
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Long term application of dairy cattle manure and pig slurry to winter cereals improves soil quality

  • Domingo Olivé, Francesc
  • Bosch Serra, Àngela D.
  • Yagüe Carrasco, María Rosa
  • Poch, Rosa M.
  • Boixadera Llobet, Jaume
Organic fertilizers (manures and slurries) applied repeatedly over many cropping seasons favourably influence nutrient recycling, maintenance of soil organic matter (SOM), and improve soil quality parameters such as soil aggregation and porosity. These aspects are particularly relevant in Mediterranean environments characterized by low SOM. This study was set up in a subhumid Mediterranean area where two different trials, devoted to winter cereals, were fertilized with dairy cattle manure (DCM) or pig slurry (PS) for a period of 12 years. One objective of this research was to evaluate the impacts of these fertilization practices on aggregate stability and SOM fractions, when compared with a mineral N fertilizer and a control (no-N) treatment. Porosity and pore shape were also studied in PS plots. The use of DCM significantly increased water stable aggregates by up to 16.4–18.0 %. Slurry addition did not affect aggregation but it increased the area occupied by pores >65 µm. Soil organic carbon (SOC) and light organic fraction (0.05–0.2 mm) increased with DCM incorporation but in PS treatments the SOC increment was non-significant. Data from DCM and PS together showed a positive and significant linear relationship between SOC (p < 0.05, R2 = 0.60), SOC light fraction (p < 0.01, R2 = 0.75) and SOC light fraction at 0.05–0.2 mm size (p < 0.01, R2 = 0.83), with water-stable aggregate. The use of animal residues (DCM or PS), applied according to an N criterion, increased available phosphorus and potassium soil content while improving yields. The enrichment of soil nutrients with DCM and PS use requires further research in order to avoid potential environmental impacts., The authors thank IRTA Mas Badia staff, all along the period of the experiment for field assistance and Montse Antúnez and Belén Martı́ nez for laboratory assistance. The initial field maintenance was done through a project fromInterministerial Science and Technology Research commission (CICYT) of Spain (AGL2001-2214-C06). The subsequent fieldmaintenance and measurements development were supported through the Plans for the improvement of crop fertilization, led by the Department of Agriculture, Livestock, Fisheries, Food and Natural Environment from Generalitat de Catalonia and through different projects from the National Institute for Agricultural and Food Scientific Research and Technology of Spain (INIA): RTA04-114-C3; RTA2010-00126-C02-02 and RTA2013-57-C5-05.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Long term application of dairy cattle manure and pig slurry to winter cereals improves soil quality

  • Domingo Olivé, Francesc
  • Bosch Serra, Àngela D.
  • Yagüe Carrasco, María Rosa
  • Poch, Rosa M.
  • Boixadera Llobet, Jaume
Organic fertilizers (manures and slurries) applied repeatedly over many cropping seasons favourably influence nutrient recycling, maintenance of soil organic matter (SOM), and improve soil quality parameters such as soil aggregation and porosity. These aspects are particularly relevant in Mediterranean environments characterized by low SOM. This study was set up in a subhumid Mediterranean area where two different trials, devoted to winter cereals, were fertilized with dairy cattle manure (DCM) or pig slurry (PS) for a period of 12 years. One objective of this research was to evaluate the impacts of these fertilization practices on aggregate stability and SOM fractions, when compared with a mineral N fertilizer and a control (no-N) treatment. Porosity and pore shape were also studied in PS plots. The use of DCM significantly increased water stable aggregates by up to 16.4–18.0 %. Slurry addition did not affect aggregation but it increased the area occupied by pores >65 µm. Soil organic carbon (SOC) and light organic fraction (0.05–0.2 mm) increased with DCM incorporation but in PS treatments the SOC increment was non-significant. Data from DCM and PS together showed a positive and significant linear relationship between SOC (p < 0.05, R2 = 0.60), SOC light fraction (p < 0.01, R2 = 0.75) and SOC light fraction at 0.05–0.2 mm size (p < 0.01, R2 = 0.83), with water-stable aggregate. The use of animal residues (DCM or PS), applied according to an N criterion, increased available phosphorus and potassium soil content while improving yields. The enrichment of soil nutrients with DCM and PS use requires further research in order to avoid potential environmental impacts., The authors thank IRTA Mas Badia staff, all along the period of the experiment for field assistance and Montse Antúnez and Belén Martı́ nez for laboratory assistance. The initial field maintenance was done through a project fromInterministerial Science and Technology Research commission (CICYT) of Spain (AGL2001-2214-C06). The subsequent fieldmaintenance and measurements development were supported through the Plans for the improvement of crop fertilization, led by the Department of Agriculture, Livestock, Fisheries, Food and Natural Environment from Generalitat de Catalonia and through different projects from the National Institute for Agricultural and Food Scientific Research and Technology of Spain (INIA): RTA04-114-C3; RTA2010-00126-C02-02 and RTA2013-57-C5-05.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Small resistance artery disease and ACE2 in hypertension, A new paradigm in the context of COVID-19

  • Galán, María|||0000-0002-4758-8388
  • Jiménez Altayó, Francesc|||0000-0002-9034-2041
Cardiovascular disease causes almost one third of deaths worldwide, and more than half are related to primary arterial hypertension (PAH). The occurrence of several deleterious events, such as hyperactivation of the renin-angiotensin system (RAS), and oxidative and inflammatory stress, contributes to the development of small vessel disease in PAH. Small resistance arteries are found at various points through the arterial tree, act as the major site of vascular resistance, and actively regulate local tissue perfusion. Experimental and clinical studies demonstrate that alterations in small resistance artery properties are important features of PAH pathophysiology. Diseased small vessels in PAH show decreased lumens, thicker walls, endothelial dysfunction, and oxidative stress and inflammation. These events may lead to altered blood flow supply to tissues and organs, and can increase the risk of thrombosis. Notably, PAH is prevalent among patients diagnosed with COVID-19, in whom evidence of small vessel disease leading to cardiovascular pathology is reported. The SARS-Cov2 virus, responsible for COVID-19, achieves cell entry through an S (spike) high-affinity protein binding to the catalytic domain of the angiotensin-converting enzyme 2 (ACE2), a negative regulator of the RAS pathway. Therefore, it is crucial to examine the relationship between small resistance artery disease, ACE2, and PAH, to understand COVID-19 morbidity and mortality. The scope of the present review is to briefly summarize available knowledge on the role of small resistance artery disease and ACE2 in PAH, and critically discuss their clinical relevance in the context of cardiovascular pathology associated to COVID-19.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Role of the Scavenger Receptor CD36 in Accelerated Diabetic Atherosclerosis

  • Navas Madroñal, Miquel|||0000-0003-2984-1471
  • Castelblanco, Esmeralda|||0000-0002-2061-6270
  • Camacho, Mercedes|||0000-0001-5970-3294
  • Consegal, Marta|||0000-0002-9201-9117
  • Ramírez-Morros, Anna|||0000-0001-8263-1292
  • Sarrias, Maria-Rosa|||0000-0001-6929-8069
  • Perez, Paulina
  • Alonso Pedrol, Núria|||0000-0001-9687-8050
  • Galán, María|||0000-0002-4758-8388
  • Mauricio, Didac|||0000-0002-2868-0250
Diabetes mellitus entails increased atherosclerotic burden and medial arterial calcification, but the precise mechanisms are not fully elucidated. We aimed to investigate the implication of CD36 in inflammation and calcification processes orchestrated by vascular smooth muscle cells (VSMCs) under hyperglycemic and atherogenic conditions. We examined the expression of CD36, pro-inflammatory cytokines, endoplasmic reticulum (ER) stress markers, and mineralization-regulating enzymes by RT-PCR in human VSMCs, cultured in a medium containing normal (5 mM) or high glucose (22 mM) for 72 h with or without oxidized low-density lipoprotein (oxLDL) (24 h). The uptake of 1,1'-dioctadecyl-3,3,3',3-tetramethylindocarbocyanine perchlorate-fluorescently (DiI) labeled oxLDL was quantified by flow cytometry and fluorimetry and calcification assays were performed in VSMC cultured in osteogenic medium and stained by alizarin red. We observed induction in the expression of CD36, cytokines, calcification markers, and ER stress markers under high glucose that was exacerbated by oxLDL. These results were confirmed in carotid plaques from subjects with diabetes versus non-diabetic subjects. Accordingly, the uptake of DiI-labeled oxLDL was increased after exposure to high glucose. The silencing of CD36 reduced the induction of CD36 and the expression of calcification enzymes and mineralization of VSMC. Our results indicate that CD36 signaling is partially involved in hyperglycemia and oxLDL-induced vascular calcification in diabetes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Emerging Roles of Lysyl Oxidases in the Cardiovascular System, New Concepts and Therapeutic Challenges

  • Martínez-González, José|||0000-0002-3894-7166
  • Varona, Saray|||0000-0002-7375-313X
  • Cañes Esteve, Laia|||0000-0002-9579-1321
  • Galán, María|||0000-0002-4758-8388
  • Briones, Ana|||0000-0001-8218-5579
  • Cachofeiro, Victoria
  • Rodríguez, Cristina|||0000-0002-6472-5647
Lysyl oxidases (LOX and LOX-likes (LOXLs) isoenzymes) belong to a family of copper-dependent enzymes classically involved in the covalent cross-linking of collagen and elastin, a pivotal process that ensures extracellular matrix (ECM) stability and provides the tensile and elastic characteristics of connective tissues. Besides this structural role, in the last years, novel biological properties have been attributed to these enzymes, which can critically influence cardiovascular function. LOX and LOXLs control cell proliferation, migration, adhesion, differentiation, oxidative stress, and transcriptional regulation and, thereby, their dysregulation has been linked to a myriad of cardiovascular pathologies. Lysyl oxidase could modulate virtually all stages of the atherosclerotic process, from endothelial dysfunction and plaque progression to calcification and rupture of advanced and complicated plaques, and contributes to vascular stiffness in hypertension. The alteration of LOX/LOXLs expression underlies the development of other vascular pathologies characterized by a destructive remodeling of the ECM, such as aneurysm and artery dissections, and contributes to the adverse myocardial remodeling and dysfunction in hypertension, myocardial infarction, and obesity. This review examines the most recent advances in the study of LOX and LOXLs biology and their pathophysiological role in cardiovascular diseases with special emphasis on their potential as therapeutic targets.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Targeting mitochondrial stress with Szeto-Schiller 31 prevents experimental abdominal aortic aneurysm, Crosstalk with endoplasmic reticulum stress

  • Navas Madroñal, Miquel|||0000-0003-2984-1471
  • Almendra-Pegueros, Rafael|||0000-0002-4411-4515
  • Puertas Umbert, Lídia|||0000-0002-2739-6522
  • Jiménez Altayó, Francesc|||0000-0002-9034-2041
  • Julve i Gil, Josep|||0000-0002-6531-2246
  • Pérez, Belén|||0000-0001-5801-1704
  • Consegal, Marta|||0000-0002-9201-9117
  • Kassan, M.
  • Martínez-González, José|||0000-0002-3894-7166
  • Rodríguez, Cristina|||0000-0002-6472-5647
  • Galán, María|||0000-0002-4758-8388
Mitochondrial dysfunction and inflammation contribute to a myriad of cardiovascular diseases. Deleterious crosstalk of mitochondria and persistent endoplasmic reticulum (ER) stress triggers oxidative stress, which is involved in the development of vascular diseases. This study determined if inhibition of mitochondrial stress reduces aneurysm development in angiotensin II (Ang II)-infused apolipoprotein-E-deficient (ApoE) mice and its effect on ER stress. The mitochondria-targeted tetrapeptide, Szeto-Schiller 31 (SS31), ameliorated mitochondrial dysfunction and the enhanced expression of ER stress markers triggered by Ang II in ApoE mice, and limited plasmatic and vascular reactive oxygen species (ROS) levels. Interestingly, SS31 improved survival, reduced the incidence and severity of abdominal aortic aneurysm (AAA), and the Ang II-induced increase in aortic diameter as evaluated by ultrasonography, resembling the response triggered by the classic ER stress inhibitors tauroursodeoxycholic acid (TUDCA) and 4-phenylbutyrate (PBA). Disorganization of the extracellular matrix, increased expression of metalloproteinases and pro-inflammatory markers and infiltration of immune cells induced by Ang II in the abdominal aorta were effectively reduced by SS31 and ER inhibitors. Further, C/EBP homologous protein (CHOP) deficiency in ApoE mice attenuated Ang II-mediated increase in vascular diameter and incidence of AAA, suggesting its contribution to the favourable response induced by ER stress inhibition. Our data demonstrate that inhibition of mitochondrial stress by SS31 limits AAA formation and increases survival through a reduction of vascular remodelling, inflammation and ROS, and support that attenuation of ER stress contributes to the favourable response elicited by SS31.